Samsung DVD Player BD-P2500 User manual

Add to my manuals
73 Pages

advertisement

Samsung DVD Player BD-P2500 User manual | Manualzz
BD-P2500
Blu-ray Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/global/register
key features of your new
Blu-ray Disc Player
Player Features
Supports a Variety of Disc Types
Supports Blu-ray (BD-ROM, BD-RE, BD-R), DVD Video, DVD-RW/-R (V mode and finalized only) discs and Audio
CD.
HDMI (High Definition Multimedia Interface)
HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV.
Blu-ray Disc Features
Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the
capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry - Large capacity
means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as a DVD.
* The following Blu-ray Disc features are disc dependant and will vary.
Appearance and navigation of features will also vary from disc to disc.
Not all discs will have the features described below.
Video highlights
The BD-ROM format supports three highly advanced video codecs, including AVC, VC-1, and MPEG-2.
HD video resolutions are also available:
~ 1920 x 1080 High Definition
~ 1280 x 720 High Definition
For High-Definition Playback
To view high-definition contents on a Blu-ray Disc, an HDTV (High Definition Television) is required.
Some Blu-ray Discs may require using the player's HDMI OUT to view high-definition content. The ability to view
high-definition content on Blu-ray Discs may be limited depending on the resolution of your TV.
Graphic planes
Two individual, full HD resolution (1920x1080)
video layers are available, on top of the HD video
layer.
One layer is assigned to video-related graphics
(like subtitles), and the other layer is assigned to
interactive elements, such as buttons or menus.
Various wipes, fades and scroll effects may be
available on both layers.
PLAY MOVIE
SCENE SELECTIONS
PREVIEWS
Graphic
Planes
%
3
HD Video
_ English
LANGUAGES
4
5
6
7
8
9
10
11
12
13
14
15
Menu graphics
Support full color resolution graphics and animation, thereby greatly surpassing the capabilities of DVD-Video.
Unlike DVD, Menus can be accessed during video playback.
Menu sounds
When you highlight or select a menu option on a disc, sounds can be heard such as button clicks or a voice-over
explaining the highlighted menu choice.
Multi-page/PopUp Menus
Unlike the DVD-Video, playback is not interrupted each time a new menu
screen is accessed. Due to Blu-ray Disc's ability to preload data from the
disc without interrupting playback, a menu may consist of several pages.
You can browse through the menu pages or select different menu paths,
while the audio and video continues playing in the background.
Interactivity
Certain Blu-ray Discs may contain Animated menus and Trivia games.
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
%
3
4
5
6
7
8
9
10
11
12
13
14
15
User Browsable Slideshows
With Blu-ray Discs, you can browse through various still pictures while the audio remains playing.
Subtitles
Depending on what is contained on the Blu-ray Disc, you may be able to select different font styles, sizes and colors
for the subtitles. Subtitles may also be animated, scrolled or faded in and out.
BD-LIVE
You can use a Blu-ray disc supporting BD-LIVE through network connection to enjoy various contents provided by
the disc manufacturer.
NETFLIX
This Blu-ray Disc Player enables you to enjoy movies on-demand provided by Netflix through a network connection.
What’s included
Check for the supplied accessories below.
OPEN/CLOSE
PAUSE
Composite (Video), Audio L/R Cable
(AC39-42001R)
Batteries for Remote Control (AAA Size)
(4301-001035)
User Manual
(AK68-01588A)
Quick Guide
(AK68-01732A)
ENTER
Remote Control
(AK59-00070D)
English _
safety information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash and Arrowhead within CAUTION: TO REDUCE THE RISK OF ELECTRIC
Triangle Is a warning sign alerting you of SHOCK, DO NOT REMOVE COVER (OR BACK) NO
dangerous voltage Inside the product
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The explanation point within the triangle
is a warning sign alerting you of
important instructions accompanying
the product.
WARNING
~ To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
~ To prevent injury, this player must be securely attached to the floor/wall in accordance with the installation instructions.
Note to CATV system installer
This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building as close to the point of
cable entry as practical.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
~ Reorient or relocate the receiving antenna.
~ Increase the separation between the equipment and receiver.
~ Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help.
This class B digital player meets all requirements of the Canadian Interference - Causing Equipment Regulations.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO LÁSER CLASE 1
CLASS 1 LASER PRODUCT
Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
_ safety information
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this product unit
and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/
IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC
11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Precautions
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep
these operating instructions handy for future reference.
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this player near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings, install in accordance with the manufacturer's instructions.
8)
Do not install near any heat sources such as radiators, heat registers, or other player (including amplifiers) that
produce heat.
9)
The polarized or the grounding type plug has an important safety purpose. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being deformed or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the player.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the player. When a cart is used, use caution when moving the cart/player
combination to avoid injury from tip-over.
13) Unplug this player during lightning storms or when unused for long periods of time.
14) Refer all servicing to a qualified service personnel. Servicing is required when the
player has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the player, the player has been exposed to rain or moisture, does not operate
normally, or has been dropped.
English _
● safety information
Note:
~ This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
~ This Blu-ray Disc Player is designed and manufactured to respond to the Region Management Information.
If the Region number of a Blu-ray Disc/DVD disc does not correspond to the Region number of this Blu-ray Disc
Player, the Blu-ray Disc Player cannot play the disc.
~ The product unit accompanying this user manual is licensed under certain intellectual property rights of certain
third parties. This product is covered by one or more of the following U.S. patents:
5,060,220 5,457,669 5,561,649 5,705,762 6,043,912 6,438,099 6,467,061 6,556,521 6,578,163 6,697,307
6,728,474 6,771,891 6,894,963 6,895,593 6,937,815 6,996,327 7,009,926 7,085,221 7,088,649 7,092,327
7,099,566 7,123,564 7,142,493 7,142,495 7,145,861 7,146,624 7,151,729 7,161,879 7,164,647 7,167,437
7,173,891 7,177,250 7,194,187 7,203,891 7,209,423 7,210,067 7,228,062 7,245,566 7,245,567 7,257,065
7,263,045 7,269,110 7,272,086 7,272,106 7,280,460 7,283,729 7,286,454 7,304,938
This product is covered by the following U.S. patents:
US4,930,158 US4,930,160
safety information
Handling Cautions
~ Before connecting other components to this Blu-ray Disc Player, be sure to turn them all off.
~ Do not move the Blu-ray Disc Player while a disc is being played as the disc may be scratched or broken, or the
Blu-ray Disc Player’s internal parts may be damaged.
~ Do not put a flower vase filled with water or any small metal objects on the Blu-ray Disc Player.
~ Be careful not to put your hand into the disc tray.
~ Do not place anything other than the disc in the disc tray.
~ Exterior interferences such as lightning and static electricity can affect the normal operation of this Blu-ray Disc Player.
If this occurs, turn the Blu-ray Disc Player off and on again with the POWER button, or disconnect and then
reconnect the AC power cord to the AC power outlet. The Blu-ray Disc Player will operate normally.
~ Be sure to remove the disc and turn off the Blu-ray Disc Player after use.
~ Disconnect the AC power cord from the AC outlet when you don’t intend to use the Blu-ray Disc Player for long
periods of time.
~ To clean a disc, wipe it in a straight line from the inside to the outside of the disc.
~ Do not expose the player to any liquid.
~ When the AC plug is connected to a wall outlet, the player will still draw power (standby mode) when it is turned
off.
~ The player should not be exposed to dripping or splashing of any liquid and no objects filled with liquids, such as
vases, should be placed on the player.
~ To disconnect the player from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be easily accessible.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
~ Do not use benzene, thinner, or other solvents for cleaning.
~ Wipe the cabinet with a soft cloth.
Restrictions on Playback
~ This player may not respond to all operating commands because some Blu-ray Disc, DVD, CD discs allow
specific or limited operation and features during playback.
Please note that this is not a defect in the player.
~ Samsung cannot assure that this player will play every disc bearing the Blu-ray Disc, DVD or CD logo because
disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, CD software
and/or the manufacture of discs.
Please contact the SAMSUNG customer care center if you have questions or encounter difficulty in playing Bluray Disc, DVD, CD discs in this player. Also, refer to rest of this Manual for additional information on playback
restrictions.
_ safety information
contents
3
What’s included
safety information
4
5
Warning
Precautions
getting started
9
10
13
Before Using the User’s Manual
Disc Type and Characteristics
Disc Storage & Management
description
14
15
16
Front Panel
Front Panel Display
Rear Panel
remote control
17
18
18
19
20
29
Tour of the Remote Control
Setting the Remote Control
Regarding the Battery
Controllable TV Codes
Connecting to a TV with an HDMI Cable
(BEST QUALITY)
HDMI Auto Detection Function
Connecting to a TV with DVI Cable (BEST QUALITY)
Connecting to a TV (Component) (BETTER QUALITY)
Connecting to a TV (Video) (GOOD QUALITY)
Connecting to an Audio System (2 Channel
Amplifier)
Connecting to an Audio System (7.1
Channel Amplifier)
Connecting to an Audio System (Dolby
Digital, DTS Amplifier)
Connecting to an Audio System (HDMI
supported Amplifier)
Connecting to the Network
basic functions of your Bluray Disc Player
30
30
31
31
32
32
33
Before Playing
On-Screen Menu Navigation
Playing a Disc
Setting the Power On / Off Melody sound
Using the Search and Skip Functions
Slow Motion Play/Step Motion Play
system setup
34
Setting the Clock
language setup
35
Setting up the Language Options
2
4
9
14
17
20
connections
21
22
23
24
25
26
27
28
34
35
● contents
key features of your new Bluray Disc Player
English _
contents
audio setup
36
Setting up the Audio Options
display setup
39
Setting up the display Options
HDMI setup
42
Setting up the HDMI setup options
parental setup
44
Setting up the Parental Lock
network setup
46
47
47
48
48
49
TCP/IP Setting
Proxy Setting
NTP Server Setting (Used to Retrieve Time
Information from NTP Server)
Mac Address
BD-LIVE Internet Connection
System Device Management
system upgrade
50
52
52
Firmware Upgrade
System Information
Firmware upgrade notification
watching a movie
53
54
55
56
57
57
58
58
59
61
63
63
64
troubleshooting
64
66
Using the Display Function
Using the Disc Menu & Popup/Title Menu
Repeat Play
Selecting the Audio Language
Selecting the Subtitle Language
Changing the Camera Angle
BONUSVIEW Settings
BD-LIVE™
Using the Bookmark Function
Using the Instant Streaming feature provided by Netflix
Playing an Audio CD(CD-DA)
Audio CD(CD-DA) Screen Elements
Buttons on the Remote Control used for
Audio CD (CD-DA) disc playback
Repeat Audio CD(CD-DA)
Troubleshooting
appendix
68
Specifications
36
39
42
44
46
persistent storage
management
49
50
53
listening to music
63
_ contents
66
68
getting started
Before Using the User’s Manual
Make sure to check the following terms before using the user’s manual.
Icon
h
g
f
Z
C
V
B
M
● Getting Started
Icons that will be used in this manual
Term
Definition
BD-ROM
This involves a function available on a BD-ROM.
BD-RE
This involves a function available on the BD-RE.
BD-R
This involves a function available on the BD-R.
DVD-VIDEO
This involves a function available on DVD-Video or DVD-R/DVD-RW discs
that have been recorded and finalized in Video Mode.
DVD-RW
This involves a function available on DVD-RW. (V mode and finalized only)
DVD-R
This involves a function available on DVD-R. (V mode and finalized only)
Audio CD
This involves a function available on an audio CD-RW/CD-R (CD-DA
format).
Note
This involves tips or instructions on the page that help each function
operate.
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before using this product. (See pages 4~6)
2) If a problem occurs, check the Troubleshooting section. (See pages 66~67)
Copyright
©2008 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the
prior written permission of Samsung Electronics Co.,Ltd.
English _
getting started
Disc Type and Characteristics
Disc types that can be played
Disc Types
BD-ROM
BD-RE/BD-R
DVD-VIDEO
Disc Logo
Recorded content
AUDIO + VIDEO
AUDIO + VIDEO
Disc Shape
Max. Playing minute
Playing time depends
on the Title
Single sided
Single sided(5 inches)
240
Double sided(5 inches)
480
Single sided(3 1/2 inches)
80
Double sided(3 1/2 inches)
160
DVD-RW
(V mode and
finalized only)
AUDIO + VIDEO
5 inches (4.7GB)
480
(EX : Extended Play)
DVD-R
(V mode and
finalized only)
AUDIO + VIDEO
5 inches (4.7GB)
480
(EX : Extended Play)
AUDIO-CD
AUDIO
Single sided(5 inches)
74
Single sided (3 1/2 inches)
20
~ This player is compatible with the NTSC color system only.
~ PAL discs will not play.
Logos of Discs that can be played
Blu-ray Disc
Dolby Digital Plus
Digital Audio
BD-LIVE
Dolby TrueHD
NTSC broadcast system in
U.S.A, Canada, Korea, Japan
Stereo
Java
Discs that cannot be played
~
~
~
~
Blu-ray Discs with a region code other than "Region A".
DVD-Video with a region number other than “1” or “ALL”
HD DVD
DVD-RAM
10_ getting started
~
~
~
~
3.9 GB DVD-R Disc for Authoring.
DVD-RW(VR mode)
DVD-ROM/PD/MV-Disc, etc
CVD/CD-ROM/CDV/CD-G/CD-I/LD
[Note]
~ Some commercial discs and DVD discs purchased outside your region may not be playable with this
product. When these discs are played, either “No disc.” or “Please check the regional code of the
disc.” will be displayed.
~ If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.
~ The unit cannot play CD-RW/CD-R and DVD-RW/-R recorded content such as divx, avi, mpg, mov,
wma, mp3,digital photo view(JPEG) file.
Region code
Disc Type
Blu-ray
DVD-VIDEO
Region code
a
1
Blu-ray Disc Region Code
Area
A
North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
B
Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.
C
India, China, Russia, Central and South Asia.
DVD Region Code
Area
1
The U.S., U.S. territories and Canada
2
Europe, Japan, the Middle East, Egypt, South Africa, Greenland
3
Taiwan, Korea, the Philippines, Indonesia, Hong Kong
4
Mexico, South America, Central America, Australia, New Zealand, Pacific Islands, Caribbean
5
Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia
6
China
Blu-ray Disc Compatibility
Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all
discs are compatible and not every disc will play back. For additional information, refer to the
Compliance and Compatibility Notice section of this Manual. If you encounter compatibility problems,
please contact the SAMSUNG customer care center at 1-800 SAMSUNG.
M`
Playback may not work for some types of discs, or when specific operations, such as angle change and aspect
ratio adjustment, are being performed. Information about the discs is written in detail on the disc box. Please
refer to this if necessary.
` Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette
smoke on the recording surface may make it impossible to use the disc for playback.
` Discs with PAL programs recorded on them cannot be played using this product.
` When a BD-J title is played, loading may take longer than a normal title, or some functions may perform slowly.
English _11
● Getting Started
Both the Blu-ray Disc Player and the discs are coded by region. These regional codes must match in
order to play the disc. If the codes do not match, the disc will not play.
The Region Number for this Blu-ray Disc Player is described on the rear panel of the Blu-ray Disc Player.
getting started
Disc Types
❖ BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM
may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for
playback on Blu-ray Disc Player's. This unit can play back pre-recorded commercial BD-ROM discs.
❖ BD-RE/BD-R
Blu-ray Disc Rewritable/Blu-ray Disc Recordable. BD-RE/BD-R is the ideal format for making backups,
or recording personal video.
❖ DVD-Video
~ A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32
subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround,
allowing you to enjoy vivid and clear theatre quality images.
~ When switching from the first layer to the second layer of a dual-layered DVD Video disc, there
may be momentary distortion in the image and sound. This is not a malfunction of the unit.
~ Once a DVD-RW/-R recorded in Video Mode is finalized, it becomes DVD-Video. Pre-recorded
(pre-stamped) commercial DVDs with movies are also referred to as DVD-Videos. This unit can
play back pre-recorded commercial DVD discs (DVD-Video discs) with movies.
❖ Audio CD
~ An audio disc on which 44.1kHz PCM Audio is recorded.
~ This unit can play back CD-DA format audio CD-RW and CD-R discs.
~ The unit may not be able to play some CD-RW or CD-R discs due to the condition of the recording.
❖ CD-RW/CD-R
~ Use a 700MB(80 minutes) CD-RW/CD-R disc. If possible, do not use a 800MB(90 minutes) or
above disc, as the disc may not play back.
~ If the CD-RW/CD-R disc was not recorded as a closed session, you may experience delays when
playing back the beginning of the disc or all recorded files may not play.
~ Some CD-RW/CD-R discs may not be playable with this unit, depending on the device which was
used to burn them. For contents recorded on CD-RW/CD-R media from CDs for your personal
use,playability may vary depending on contents and discs.
❖ DVD-R Disc Playback
~ Once a DVD-R recorded in Video Mode is finalized, it becomes DVD-Video.
~ This unit can play back DVD-R discs recorded and finalized with a DVD video recorder. It may not be
able to play some DVD-R discs depending on the disc and the condition of the recording.
❖ DVD-RW Disc Playback
~ Playback can be performed with DVD-RW discs recorded in the Video Mode and finalized.
~ Once a DVD-RW recorded in Video Mode is finalized, it becomes DVD-Video. Ability to play back
may depend on recording conditions.
Disc Format
❖ DVD-RW/-R (V)
~ This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be
played by this Blu-ray Disc Player once it has been finalized.
❖ AVCHD (Advanced Video Codec High Definition)
~ This player can playback AVCHD format discs. These discs are normally recorded and used in
camcorders.
~ The AVCHD format is a high definition digital video camera format.
~ The MPEG-4 AVC/H.264 format is capable of compressing images at higher efficiency than that
of the conventional image compressing format.
~ Some AVCHD discs use the “x.v.Color” format.
~ This player can playback AVCHD discs using “x.v.Color” format.
~ “x.v.Color” is a trademark of Sony Corporation.
12_ getting started
~ “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
and Sony Corporation.
M`
Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
` “x.v.Color” offers a wider color range than normal DVD camcorder discs.
Disc Storage & Management
● Getting Started
Disc Handling
❖ Disc Shape
~ Use discs with regular shapes. If an irregular disc (a disc with a special
shape) is used, this Blu-ray Disc Player may be damaged.
❖ Holding discs
~ Avoid touching the surface of a disc where recording is performed.
❖ Blu-ray Discs
~ If the player is not used for a long period of time, remove the Blu-ray Disc from the player and
store it in its case.
~ Be careful not to leave fingerprints or scratches on the surface of the Blu-ray Disc.
❖ DVD-RW and DVD-R
~ Clean with an optional PD disc cleaner (LF-K200DCA1 where available).
Do not use cleaners or cloths for CDs to clean DVD-RW/-R discs.
❖ DVD-Video, Audio-CD
~ Wipe off dirt or contamination on the disc with a soft cloth.
❖ Cautions on handling discs
~ Do not write on the printed side with a ball-point pen or pencil.
~ Do not use record cleaning sprays or antistatic. Also, do not use volatile
chemicals, such as benzene or thinner.
~ Do not apply labels or stickers to discs. (Do not use discs fixed with exposed
tape adhesive or leftover peeled-off stickers.)
~ Do not use scratch-proof protectors or covers.
~ Do not use discs printed with label printers available on the market.
~ Do not load warped or cracked discs.
Disc Storage
Be careful not to damage the disc because the data on these discs is highly vulnerable to the
environment.
~ Do not keep under direct sunlight.
~ Keep in a cool ventilated area.
~ Store vertically.
~ Keep in a clean protection jacket.
~ If you move your Blu-ray Disc Player suddenly from a cold place to a warm place, condensation may
generate on the operating parts and lens and cause abnormal disc playback. If this occurs, wait for two
hours before connecting the plug to the power outlet. Then insert the disc and try to play back again.
English _13
description
Front Panel
1
2
3
8 7
6
POWER BUTTON
Turns the Blu-ray Disc Player on and off.
DISC TRAY
Opens to accept a disc.
PLAY/PAUSE BUTTON
Plays a disc or pauses playback.
SEARCH/SKIP BUTTONS
Goes to the next title/chapter/track or goes back to the previous title/chapter/track.
STOP BUTTON
Stops disc playback.
DISPLAY
Displays the playing status, time, etc.
Remote Control Sensor Detects signals from the remote control.
OPEN/CLOSE BUTTON
14_ description
5 4
Opens and closes the disc tray.
Front Panel Display
● Description
Playback-related,
Open/Close indicator
Lights when playback-related and open/close buttons are selected.
In Disc Indicator
Lights when a disc is in the tray.
Disc Type indicators
Lights to indicate the disc type in the tray.
USB Indicator
Lights to indicate when USB is connected.
HDMI Indicator
Lights to indicate when HDMI is connected.
Resolution Indicator
Indicates the 1080p, 1080i or 720p resolution when HDMI or Component is
connected.
STATUS Indicator
Playing time/current status indicator.
English _15
description
Rear Panel
2
3
4
5
1
6
1
7
8
A
Fan
The fan always revolves when the power is on.
Ensure a minimum of 4 inches of clear space on
all sides of the fan when installing the product.
M`
USB HOST
It can be used as local storage media when connected to BD-LIVE. It can be also used
for firmware upgrade.
LAN
It can be also used for connection to BD-LIVE or firmware upgrade.
HDMI OUT
Using a HDMI cable, connect this HDMI output terminal to the HDMI input terminal on
your TV for the best quality picture and to your Receiver for the best quality sound.
DIGITAL AUDIO OUT
(OPTICAL)
Connects to a Receiver.
COMPONENT
VIDEO OUT
Connects to equipment having Component video input.
AUDIO OUT
Connects to the audio input of external equipment using audio cables.
VIDEO OUT
Connects the input of external equipment using a video cable.
7.1CH ANALOG
AUDIO OUT
Connect to a 7.1CH analog input on an A/V amplifier
(When connecting to a 5.1 channel home theater or receiver, connect all the Analog
Audio output jacks from the player except for the Surround Back Left/Surround Back
Right outputs)
Software upgrades using the USB Host jack must be performed with a USB flash drive only.
` Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.
16_ description
remote control
Tour of the Remote Control
Installing batteries in the Remote Control
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends
of the batteries with the diagram inside the
compartment.
3. Replace the cover.
Assuming typical TV usage, the batteries last
for about one year.
OPEN/CLOSE Buttons
To open and close the disc tray.
POWER Button
OPEN/CLOSE
TV POWER Button
TV INPUT SEL. Button
After setup, allows you to set the input source on your
TV.
NUMBER Buttons
CANCEL Button
SLOW Button
Each time this button is pressed, the disc will play
slowly.
PAUSE Button
PAUSE
REVERSE/FORWARD SKIP Buttons
STOP Button
Press to skip backwards or forwards.
Press to stop a disc.
PLAY Button
REVERSE/FORWARD SEARCH Buttons
Press to play a disc.
Press to search a disc backwards or forwards.
TV VOL Buttons
TV CH Button
TV volume adjustment
Use this to select a TV program.
MENU Button
TV MUTE Button
Brings up the Blu-ray Disc Player’s setup menu.
Mutes the speakers of your TV.
ENTER/DIRECTION Buttons
INFO Button
Displays current setting or disc status.
Press to pause a disc.
RETURN Button
ENTER
EXIT Button
DISC MENU Button
Use this to enter the disc menu.
POPUP MENU/TITLE MENU Button
Use this to enter the popup menu/title menu.
COLOR Buttons : RED(A), GREEN (B),
YELLOW(C), BLUE(D)
Used to access special features on BD-J
discs(disc dependent).
AUDIO Button
Use this to access various audio functions on a
disc
(Blu-ray Disc/DVD).
MARKER Button
Use this to bookmark a position while playing a disc.
SUBTITLE Button
Press this to switch the Blu-ray Disc/DVD’s
subtitle language.
REPEAT A-B Button
Allows you to repeat playback of a certain
section.
BONUSVIEW Button
Use this to turn on or off the BONUSVIEW function on
supported Blu-ray Discs.
REPEAT Button
Allows you to repeat a title, chapter, track or disc.
English _17
● remote control
1. Lift the cover at the back of the remote
control upward as shown.
remote control
Setting the Remote Control
You can control certain functions of your TV with this remote control.
Control function buttons include : TV POWER, TV CH ,/., TV VOL +/–, TV MUTE, TV INPUT SEL. button.
To determine whether your television is compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV POWER button and enter the two-figure code corresponding to the brand of
your television, by pressing the appropriate number buttons. (see the next page for the code list).
If your television is compatible with the remote control, it will switch off.
It is now programmed to operate with the remote control.
M`
If several codes are indicated for your television brand, try each one in turn until you find one that works.
` If you replace the remote control's batteries, you must set the brand code again.
You can then control the television using the following buttons after pressing the TV button.
Button
TV POWER
TV INPUT SEL.
TV VOL (+/–)
TV CH (,/.)
TV MUTE
M`
Function
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the desired channel.
Used to toggle the sound on and off.
The functions listed above will not necessarily work on all televisions. If you encounter problems, operate the
television directly.
Regarding the Battery
If the remote does not operate properly:
~
~
~
~
Check the polarity +/– of the batteries (Dry-Cell)
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
18_ remote control
Controllable TV Codes
Brand
SAMSUNG
Code
TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09
AIWA
TV POWER+82
ANAM
TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18
TV POWER+57
BLAUPUNKT
TV POWER+71
BRANDT
TV POWER+73
BRIONVEGA
TV POWER+57
CGE
TV POWER+52
CONTINENTAL EDISON
TV POWER+75
DAEWOO
TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34
EMERSON
TV POWER+64
FERGUSON
TV POWER+73
FINLUX
TV POWER+06, +49, +57
FORMENTI
TV POWER+57
FUJITSU
TV POWER+84
GRADIENTE
TV POWER+70
GRUNDIG
TV POWER+49, +52, +71
HITACHI
TV POWER+60, +72, +73, +75
IMPERIAL
TV POWER+52
JVC
TV POWER+61, +79
LG
TV POWER+06, +19, +20, +21, +22, +78
LOEWE
TV POWER+06, +69
LOEWE OPTA
TV POWER+06, +57
MAGNAVOX
TV POWER+40
METZ
TV POWER+57
MITSUBISHI
MIVAR
TV POWER+06, +48, +62, +65
TV POWER+52, +77
NEC
TV POWER+83
NEWSAN
TV POWER+68
NOBLEX
TV POWER+66
NOKIA
TV POWER+74
NORDMENDE
TV POWER+72, +73, +75
PANASONIC
TV POWER+53, +54, +74, +75
PHILIPS
TV POWER+06, +55, +56, +57
PHONOLA
TV POWER+06, +56, +57
PIONEER
TV POWER+58, +59, +73, +74
RADIOLA
TV POWER+06, +56
RADIOMARELLI
TV POWER+57
RCA
TV POWER+45, +46
REX
TV POWER+74
SABA
TV POWER+57, +72, +73, +74, +75
SALORA
TV POWER+74
SANYO
TV POWER+41, +42, +43, +44, +48
SCHNEIDER
TV POWER+06
SELECO
TV POWER+74
SHARP
TV POWER+36, +37, +38, +39, +48
SIEMENS
TV POWER+71
SINGER
TV POWER+57
SINUDYNE
TV POWER+57
SONY
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
● remote control
BANG & OLUFSEN
TV POWER+35, +48
TV POWER+73
TV POWER+67, +73, +75, +76
TV POWER+72, +73, +75
TV POWER+80, +81
TV POWER+47, +48, +49, +50, +51, +52
WEGA
TV POWER+57
YOKO
TV POWER+06
ZENITH
TV POWER+63
English _19
connections
This section involves various methods of connecting the Blu-ray Disc Player to other
external components such as a TV.
Connecting to a TV with an HDMI Cable (BEST QUALITY)
1. Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player
to the HDMI IN terminal of your TV.
2. Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears on
your TV screen.
~ If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on
the remote control and select HDMI as the external source of the TV.
1
A
HDMI cable
(not included)
M`
If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.
` If the player is connected to your TV in HDMI 1080p output mode, you must use a High speed(category2)
HDMI cable.
20_ connections
HDMI Auto Detection Function
The player's video output will automatically change to HDMI output resolution when connecting an HDMI cable
while power is on (see page 41).
M`
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user's manual of your TV.
` If an HDMI cable is connected from the player to a TV, the Blu-ray Disc Player’s output is set to HDMI output
` If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 41)
` When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest provided by the TV.
` If you connect a Samsung TV to the Blu-ray Disc Player using an HDMI cable, the player can be easily operated
using the TV remote control. (This is only available with Samsung TVs that support the Anynet+ feature.) (See
pages 42~43)
~ HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
Using HDMI, the Blu-ray Disc Player transmits a digital video and audio signal and displays a vivid
picture on a TV having an HDMI input jack.
~ HDMI connection description
HDMI connector - Supports video and digital audio data (LPCM or Bitstream).
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise
appears on the screen.
~ Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a Blu-ray Disc/DVD, the data
transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the Blu-ray Disc Player)
or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is
degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A
conversion and is a pure digital signal from the player to your TV.
~ What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting Blu-ray Disc/DVD
content outputted via HDMI from being copied. It provides a secure digital link between a video
source (PC, DVD. etc) and a display device (TV, projector . etc). Content is encrypted at the source
device to prevent unauthorized copies from being made.
~ What is Anynet+?
Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the
Anynet+ feature.
- If your Samsung TV has an
logo, then it supports the Anynet+ function.
-If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on
automatically and switch to HDMI mode.
- If you turn on the player and press the Play button with a disc already inserted,the TV will
immediately turn on and switch to HDMI mode.
English _21
● connections
resolution automatically within 10 seconds.
connections
Connecting to a TV with DVI Cable (BEST QUALITY)
1. Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player
to the DVI IN terminal of your TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc
Player to the AUDIO (red and white) IN terminals of your TV.
Turn on the Blu-ray Disc Player and TV.
3. Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on
your TV screen.
~ If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on
the remote control and select HDMI as the external source of the TV.
Connecting the HDMI cable while the Blu-ray Disc Player’s power is on will result in the player’s video output being
changed to HDMI mode automatically (see page 41).
M`
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user's manual of your TV.
` If an HDMI-DVI cable is plugged into the TV, the Blu-ray Disc Player’s output resolution is set to HDMI
automatically within 10 seconds.
` If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 41)
` When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest provided by the TV
` If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.
1
A
HDMI-DVI cable
(not included)
Audio Cable
Red
22_ connections
White
Connecting to a TV (Component) (BETTER QUALITY)
- Connecting to your TV using Component video cables.
- You will enjoy high quality images with accurate color reproduction. Component video separates the picture
element into black and white(Y), blue(Pb), red(Pr) signals to present clear and clean images. (Audio signals are
delivered through the audio output.)
1. Using Component video cables (not included) , connect the COMPONENT VIDEO OUT terminals on the rear of
the Blu-ray Disc Player to the COMPONENT IN terminals of your TV.
3. Press the input selector on your TV remote control until the Component signal from the Blu-ray Disc Player
appears on the TV screen.
~ If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on
the remote control and select COMPONENT as the external source of the TV.
1
A
Component cable
(not included)
Audio Cable
(Audio)Red
M`
White
Red
Blue
Green
Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y” or “Cr,
Cb, Y” instead of “Pr, Pb, Y”. The number and position of terminals may vary depending on the TV set. Please
refer to the user's manual of your TV.
` You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 480p and 480i,
depending on the disc type. (See page 41)
` The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc. (See page 41)
` In DVD playback, if both HDMI and Component jacks are connected and you select the Component mode, the
Display Setup menu will show the output resolution as 1080p. The resolution is actually 480i.
English _23
● connections
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc
Player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray Disc Player and TV.
connections
Connecting to a TV (Video) (GOOD QUALITY)
1. Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of
the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.
2. Turn on the Blu-ray Disc Player and TV.
3. Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on
the TV screen.
~ If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on
the remote control and select VIDEO as the external source of the TV.
1
A
Red
M`
White
Yellow
Noise may be generated if the audio cable is placed too close to the power cable.
` If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 25~28)
` The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of
your TV.
` If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
Blu-ray Disc Player.
` The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.
(See page 41)
24_ connections
Connecting to an Audio System (2 Channel Amplifier)
1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc
Player to the AUDIO (red and white) IN terminals of your Amplifier.
3. Turn on the Blu-ray Disc Player, TV and Amplifier.
4. Press the input select button of the Amplifier to select the external input in order to hear sound from
the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
1
A
Audio Cable
2-Channel stereo amp
Red
M`
White
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
` Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS
logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are trademarks of DTS, Inc. © 1996-2008 DTS,
Inc. All Rights Reserved.
English _25
● connections
2. Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT terminals on the rear of the
Blu-ray Disc Player to the HDMI, COMPONENT or VIDEO IN terminal of your TV as described on pages 20 to
24.
connections
Connecting to an Audio System (7.1 Channel Amplifier)
1. Using the audio cables, connect the 7.1 ANALOG AUDIO OUT (Front R, Front L, CENTER, SUBWOOFER,
Surround L, Surround R, SURR.BACK L , SURR.BACK R) terminals on the rear of the Blu-ray Disc player to
the 7.1 Channel ANALOG AUDIO IN (Front R, Front L, CENTER, SUBWOOFER, Surround L, Surround R,
SURR.BACK L , SURR.BACK R) terminals of your Amplifier.
2. Using the video signal cable(s), connect the HDMI, COMPONENT, or VIDEO OUT terminals on the rear of the
Blu-ray Disc player to the HDMI, COMPONENT, or VIDEO IN terminal of your TV as described on pages 20 to
24.
3. Turn on the Blu-ray Disc player, TV and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound from
the Blu-ray Disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
1
A
7.1 Channel Amplifier
M`
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
` Please set the audio in the menu screen according to the Amplifier. (See pages 36~37)
` The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.
` The front left and right outputs on your player and 7.1 channel amplifier must be connected to hear disc menu
audio from certain Blu-ray discs.
` When connecting to a 5.1 channel home theater or receiver, connect all the Analog Audio output jacks from
the player except for the Surround Back Left/Surround Back Right outputs.
26_ connections
Connecting to an Audio System
(Dolby Digital, DTS Amplifier)
1. U
sing the optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the
Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier.
3. Turn on the Blu-ray Disc Player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select the external input in order to hear sound from
the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
1
A
M`
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
` Please set the audio in the menu screen according to the Amplifier. (See pages 35~36)
` The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.
` When using this connection, discs with LPCM audio soundtracks will only be heard over the front two
channels.
English _27
● connections
2. Using the video signal cable(s), connect the HDMI , COMPONENT or VIDEO OUT terminals on the rear of the
Blu-ray Disc Player to the HDMI, COMPONENT or VIDEO IN terminals of your TV as described on pages 20 to
24.
connections
Connecting to an Audio System
(HDMI supported Amplifier)
1. Using the HDMI-HDMI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc
Player to the HDMI IN terminal of your Amplifier.
2. Using the HDMI-HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of your
TV.
3. Turn on the Blu-ray Disc Player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound from
the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
1
A
M`
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
` Please set the audio in the menu screen according to the Amplifier. (See pages 35~36)
` The position of HDMI terminals may vary depending on the Amplifier. Please refer to the user's manual of your
Amplifier.
28_ connections
Connecting to THE NETWORK
You can use a LAN adaptor to connect to network service or upgrade the current firmware.
1
A
To LAN port
Connecting using a router
(e.g. DSL)
Broadband modem
(with integrated router)
Router
Broadband modem
Or
Broadband
service
M`
To LAN port
To LAN port
Broadband
service
Internet access to Samsung’s update server may not be allowed, depending on the router you use or the ISP’s policy.
For more information, contact your ISP (Internet Service Provider).
` For DSL users, please use a router to make a network connection.
English _29
● connections
1. Using the Direct LAN Cable (UTP cable, not included), connect the LAN terminal on the rear of the Blu-ray Disc
Player to the LAN terminal of your modem.
~ Connect to access the BD-LIVE service.
~ Connect to access Netflix.
~ Connect for software upgrades from Samsung’s update server. (see pages 50 to 52)
basic functions of your
Blu-ray Disc Player
This section introduces basic playback functions and playback by disc type.
Before Playing
~ Turn on your TV and set it to the correct Video Input (the input the Blu-ray Disc Player is connected to).
~ If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the POWER button, this screen comes up:
If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for
the first time.) If the language for the startup screen is not set,
the settings may change whenever you turn the power on or
off. Therefore, make sure that you select the language you
want to use. Once you select a menu language, you can
change it by pressing the
button on the front panel of the
unit for more than 5 seconds with no disc in the unit. Then the
MENU LANGUAGE SELECTION window appears again
where you can reset your preferred language.
M`
MENU LANGUAGE SELECTION
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
Macrovision : BBS41
Discs which can be played on this player (For the following discs, the ability to play back may depend on
recording conditions.)
• BD-ROM
• BD-RE
• BD-R
• DVD-R
• DVD-RW (V mode) • CD-RW/CD-R
• The unit may not play certain CD-RW/CD-R and DVD-R due to the disc type or recording conditions.
` Discs which cannot be played on this player.
• HD DVD
• DVD+RW
• DVD-ROM
• DVD-RAM
• CD-ROM
• CVD
• Super Audio CD(except CD layer)
• DVD+R
• CDV
• CD-I
• CDGs play audio only, not graphics.
` Blu-ray is a new and evolving format. Accordingly, disc compatibility issues with new and existing format discs
are possible. Not all discs are compatible and not every disc will playback.
For additional information, refer to the Disc Type and Characteristics and Compliance and Compatibility Notice
sections of this Manual. If you encounter compatibility problems, please contact SAMSUNG customer care
center.
` The unit cannot play CD-RW/CD-R and DVD-RW/-R with recorded content such as divx, avi, mpg, mov, wma,
mp3, digital photo view(JPEG) file.
30_ basic functions
On-Screen Menu Navigation
System Setup
System Information
Time Zone
Video
Music
Language Setup
Subtitle
Netflix
Disc Menu
Disclaimer
Menu
Audio Setup
Clock Set
Power On/Off sound
Persistent Storage Management
System Update
Digital Output
Display Setup
TV Aspect
Movie Frame (24 Fs)
Resolution
PCM Down Sampling
Dynamic Compression
Speaker Setup
Screen Message
Front Display
Anynet+ (HDMI-CEC)
HDMI Setup
HDMI Format
Network Setup
TCP/IP
Proxy
Sharpness
DVD Noise Reduction
NTP Server
MAC Address
BD-LIVE Internet Connection
Parental Lock
Parental Setup
Rating Level
New Password
Playing a Disc
1. Press the OPEN/CLOSE ( ) button.
The STANDBY indicator light goes out and the tray opens.
. Place a disc gently into the tray with the disc’s label facing up.
. Press the PLAY (
M`
) button or OPEN/CLOSE (
) button to close the disc tray.
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
again, it will pick up where you left off.
In some BD discs(BD-J), this function can be prohibited.
) button
` Press the STOP ( ) button twice during playback to disable the Resume function.
` To pause the playback, press the PAUSE ( ) button during playback.
To resume, press the PLAY (
) button.
` If the player is left in the stop mode more than 5 minutes without any user interface, a screen saver will appear
on your TV. If the player is left in the screen saver mode for more than 30 minutes, the power will
automatically turn off except during playback of an CDDA (Automatic Power-Off Function).
` If no input is entered for more than 5 minutes in pause mode, the operation will stop (except for some Blu-ray
discs).
English _31
● basic functions
Setup
Audio
basic functions of your
Blu-ray Disc Player
Setting the Power On / Off Melody sound
When you turn the player on or off, a melody sound is produced.
1. With the unit in Stop mode, press the MENU button.
. Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button.
. Press the ▲▼ buttons to select System Setup, then press the ENTER or ▶ button.
. Press the ▲▼ buttons to select Power On/Off sound, then press the ENTER or ▶ button.
. Press the ▲▼ buttons to select Off or On, then press the ENTER or ▶ button.
. Press the MENU button to exit the setup menu.
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next
selection.
hgfZCV
Searching through a Chapter or Track
During playback, press the SEARCH (
) button.
~ If you press the SEARCH ( ) button, the playback speed is increased to
) X2 ) X4 ) X8 ) X16 ) X32 ) X128
~ If you press the SEARCH ( ) button, the playback speed is increased to
( X2 ( X4 ( X8 ( X16 ( X32 ( X128
~ To return to normal speed playback, press the PLAY (
M`
) button.
No sound is heard during search mode.
hgfZCV
Skipping Tracks
During playback, press the SKIP (
) button.
When playing a Blu-ray Disc/DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you
press the SKIP (
) button, it moves to the beginning of the chapter. One more press makes it move
to the beginning of the previous chapter.
32_ basic functions
Slow Motion Play/Step Motion Play
During playback, press the SLOW button on the remote control.
~ If you press the SLOW button, the playback speed is reduced to
*1/8 * 1/4 * 1/2
~ To return to normal speed playback, press the PLAY ( ) button.
M`
This (
) icon indicates an invalid button press.
` No sound is heard during slow mode.
` Slow motion operates only in the forward direction.
hgfZCV
Step Motion Play
In pause mode, press the PAUSE ( ) button.
~ Each time the PAUSE ( ) button is pressed a new frame will appear.
~ To return to normal speed playback, press the PLAY (
M`
) button.
No sound is heard during step mode.
` Step motion operates only in the forward direction.
English _33
● basic functions
hgfZCV
Slow Motion Play
system setup
For your convenience, you can set this player’s features for the best use in your
home environment.
Setting the Clock
Choose your time zone
1. With the unit in Stop mode, press the MENU button.
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
System Information
Disclaimer
Setup
System Setup
Time Zone
Language Setup
Clock Set
. Press the ▲▼ buttons to select System Setup, then
press the ENTER or ▶ button.
Audio Setup
Power On/Off sound : On
Display Setup
Persistent Storage Management
HDMI Setup
System Update
. Press the ▲▼ buttons to select Time Zone, then press
the ENTER or ▶ button.
Network Setup
No Disc
Parental Setup
. Use the ◀▶ button to place the cursor to the appropriate
time zone for your area and press the ENTER button.
Time Zone
Disclaimer
System Information
Setup
System Setup
Time Zone
Language Setup
Clock Set
Audio Setup
System Update
No Disc
Display Setup
HDMI SetupGMT + 00:00
London, Lisbon
Network Setup
Parental Setup
s Save
M`
r Return
To set the time automatically, set the NTP server to On (see page 47).
Set the clock
To setup, follow steps 1 through 3 above.
. Press the ▲▼ buttons to select Clock Set, then press the
ENTER or ▶ button.
System Information
Time Zone
Disclaimer
Setup
No Disc
. Press the ◀▶ buttons to move to “da.”(date), “hr” (hour),
“min” (minute) and “am/pm”. Set the date and time by
pressing the ▲▼ buttons, then press the ENTER button.
System Setup
Clock Set
Language Setup
Power On/Off sound : On
Audio Setup
Persistent Storage Management
Display Setup
System Update
HDMI Setup
Network Setup
Parental Setup
System Information
Time Zone
Disclaimer
No Disc
System Setup
Setup
Clock Set
Power
On/Off
sound : On
hr. min.
am/pm
Audio
Setup
JAN/01/2008
Persistent
AM Management
02 05 Storage
Display Setup
Tuesday
HDMI Setups Save
System Update
Network Setup
Parental Setup
34_ system setup
Clock Set
Languageda.Setup
r Return
language setup
Setting up the Language Options
Once you set the audio, subtitle, disc menu and player menu language options, they will be applied automatically
every time you watch a movie.
If you want to choose a different audio and subtitle language while playing a disc, you can also use the disc
menu to make the selection.
1. With the unit in Stop mode, press the MENU button.
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
Disclaimer
System Setup
Setup
Language Setup
No Disc
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
. Press the ▲▼ buttons to select Language Setup, then
press the ENTER or ▶ button.
Language setup menu will be displayed.
Disclaimer
System Setup
Setup
Language Setup
Audio
: Original
Audio Setup
Subtitle
: Automatic
Display Setup
Disc Menu
: English
HDMI Setup
Menu
: Automatic
: Original
No Disc
Network Setup
Parental Setup
. Press the ▲▼ buttons to select the desired language
option, press the ENTER or ▶ button.
No Disc
~
~
~
~
Audio : For the disc audio language.
Subtitle : For the disc subtitles.
Disc Menu: For the disc menu contained on the disc
Menu: For the on-screen menu of your Blu-ray Disc
Player.
Disclaimer
System Setup
Setup
Language Setup
Audio
Audio Setup
Subtitle
Display Setup
Disc Menu
English
: Automatic
Français
: Deutsch
English
HDMI Setup
Menu
: Español
English
Network Setup
Italiano
Parental Setup
. Press the ▲▼ buttons to select the desired language, then press the ENTER button.
M`
Press the RETURN or ◀ button to return to the previous menu. Press the MENU button to exit the menu.
` The selected language will only appear if it is supported on the disc.
English _35
● language setup
M`
audio setup
Setting up the Audio Options
Allows you to set up the Audio device and sound status depending on the
audio system being used with the player.
System Setup
No Disc
1. With the unit in Stop mode, press the MENU button.
Disclaimer
Language Setup
Setup
Audio Setup
Display Setup
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
HDMI Setup
Network Setup
Parental Setup
. Press the ▲▼ buttons to select Audio Setup, then press
the ENTER or ▶ button.
. Press the ▲▼ buttons to select the desired audio option
from the options described below, then press the ENTER
or ▶ button.
. Press the ▲▼ buttons to select the desired item, then
press the ENTER button.
. Each audio option is described in detail below.
M`
System Setup
No Disc
Disclaimer
Language Setup
Setup
Audio Setup
Digital Output
Display Setup
PCM Down Sampling : On
HDMI Setup
Dynamic Compression : On
Network Setup
Speaker Setup
: PCM
Parental Setup
Press the RETURN or ◀ button to return to the previous menu. Press the MENU button to exit the menu.
Digital Output
Blu-ray Discs may include three audio streams.
System Setup
- Primary Audio : Main audio soundtrack of the disc
No Disc
- Secondary Audio : Provides audio for the BONUSVIEW
window of a Blu-ray Disc.
- Effect Audio : You may hear menu prompt sounds (etc.) when
selecting menu items (depending on the disc),
on a Blu-ray Disc.
Disclaimer
Language Setup
Setup
Audio Setup
Digital Output
Display Setup
HDMI Setup
Bitstream(Re-encode)
PCM Down Sampling : On
Bitstream(Audiophile)
Dynamic Compression : On
Network Setup
Speaker Setup
: PCM
PCM
Parental Setup
Digital Output Selections
Setup
PCM
Definition
Decodes Primary, Secondary
and Effect audio streams
together into PCM audio.
Decodes Primary, Secondary
and Effect audio streams
Pro
Con
Recommended use
You can enjoy Primary,
Secondary and Effect audio
together.
You can also enjoy Dolby
TrueHD sound even if your
receiver cannot decode Dolby
TrueHD.
You cannot hear DTS-HD Master
Audio sound with this setting
even if you have an HDMI 1.3
receiver which has DTS-HD
Master Audio decoding
capability.
Recommended choice if you
have an HDMI 1.1 or HDMI 1.2
receiver which cannot decode
DTS-HD Master Audio.
Also recommended if you are
using an optical cable for audio
and your receiver cannot decode
Dolby Digital or DTS.
You can enjoy Primary,
Bitstream
together into PCM audio, then Secondary and Effect audio
(Re-encode) re-encodes the PCM audio into together.
DTS bitstream.
Outputs only the Primary audio
soundtrack (main soundtrack
Bitstream
of the movie) so that your
(Audiophile) receiver can decode the audio
bitstream.
36_ audio setup
Recommended choice if you
Audio quality may be lower than don’t have an HDMI supported
PCM or Bitstream (Audiophile) receiver, but have a receiver with
setups.
an Optical input that can decode
DTS.
You can enjoy DTS-HD Master
Audio sound if you have HDMI
You will not hear Secondary and
1.3 receiver which has DTSEffect audio.
HD Master Audio decoding
capability.
Recommended choice if you
have an HDMI 1.3 receiver
which has DTS-HD Master Audio
decoding capability.
M`
If you have selected a LPCM soundtrack on a disc, the output will automatically be set to PCM.
` Be sure to select the correct Digital Output or you will hear no sound or a loud noise.
` If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio
` This Digital Output setup does not effect the analog (L/R) audio or HDMI audio output to your TV. It effects the
optical and HDMI audio output when connected to a receiver.
` When the player outputs HD audio bitstream(Dolby TrueHD or DTS-HD Master Audio) from the Optical jack to
an HDMI 1.3 receiver, only 2 channel PCM audio will be heard.
` If you play MPEG audio soundtracks, audio signal outputs PCM regardless of Digital Ouptut Selections(PCM or
Bitstream).
PCM Down Sampling
~ On : Select this when the Amplifier connected to the player
is not 96KHz compatible. 96KHz signals will be down
converted to 48KHz
~ Off : Select this when the Amplifier connected to the player
is 96KHz compatible. Signals will be output without any
changes.
M`
System Setup
No Disc
Disclaimer
Language Setup
Digital Output
Setup
Audio Setup
PCM Down Sampling : OnOn
Display Setup
Off
Dynamic Compression : On
HDMI Setup
Speaker Setup
: PCM
Network Setup
Parental Setup
Even when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the
optical digital outputs.
HDMI
~ If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the unit may
output PCM 2ch downmixed audio even though you set Bitstream(either Re-encode or Audiophile) on
your setup menu.
~ If your TV is not compatible with PCM sampling rates over 48kHz, the unit may output 48kHz
downsampled PCM audio even though you set "PCM Down Sampling" as "Off".
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
~ Off : You can enjoy the movie with the standard Dynamic
Range.
~ On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
No Disc
System Setup
Digital Output
Disclaimer
Language Setup
PCM Down Sampling : On
Setup
Audio Setup
Dynamic Compression : On
Display Setup
Speaker Setup
: PCM
Off
HDMI Setup
Network Setup
Parental Setup
English _37
● audio setup
signal outputs as PCM.
` Secondary and Effect audio will not be heard with regular DVDs.
` Some Blu-ray Discs do not have Secondary and Effect audio.
audio setup
Speaker Setup
If you have connected this player to an Amp/Receiver or Home theater via the 7.1 channel Analog
outputs you need to set the Speaker Options for the best sound.
To setup, follow steps 1 to 3 in "Setting up the Audio Options"
on page 36.
System Setup
No Disc
Disclaimer
Language Setup
Setup
Audio Setup
4. Press the ▲▼ buttons to select Speaker Setup, then
press the ENTER or ▶ button.
Display Setup
HDMI Setup
Network Setup
Parental Setup
5. Press the ▲▼ buttons to select the desired Speaker, then
press the ENTER button to change speaker setup.
6. When done, use the ▲▼ buttons to select Save, then
press the ENTER button.
If you don’t want to save your settings, use the ▲▼◀▶
buttons to select Cancel, then press the ENTER button.
System Setup
No Disc
PCM Down Sampling : On
Disclaimer
Language Setup
Dynamic Compression : On
Setup
Audio Setup
Speaker Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
Speaker Setup
PCM Down Sampling : On
Front (L, R)
Large, Small
Center (C)
Large, Small, None
Surround (LS, RS)
Large, Small, None
Subwoofer (LFE)
On, Off
Surround Back
(LSB, RSB)
Language Setup
Disclaimer
Speaker Setup
No Disc
Setup
Dynamic Compression : On
Audio Setup
Display Setup
Network Setup
Parental Setup
Speaker Setup
Front
LFE
Center
Surround
Surround Back
Save
a Test Tone
s Select
:
:
:
:
:
Small
On
Small
Small
Small
Cancel
r Return
Large, Small, None
Speaker
~ Large : Delivers full bandwidth sound with bass below 100 Hz.
~ Small : If LFE is on, bass below 100 Hz will be outputted through a Subwoofer instead of the
speakers. If LFE is off and the Front Speaker is set to Large, sound will be outputted through the Front
Speaker.
~ None : Select to disable the speakers.
Subwoofer Speaker
~ On : Select to use the subwoofer speaker.
~ Off : Select to disable the subwoofer speaker.
(This option can only be selected when the Front (L+R) speakers are set to Large.)
Press the RED(A) button
~ A test tone will be sent to L ; C ; R ; RS ; RSB ; LSB ; LS ; LFE in order so you can make
sure the speakers are set up correctly.
~ To end the test tone, press the RED (A) button again.
~ The test tone can only be activated when no discs are in the unit.
~ The test tone outputs through the 7.1 channel analog outputs only.
M`
38_ audio setup
Press the RETURN to return to the previous menu.
display setup
Setting up the display Options
This function allows you to setup the TV screen settings. This function
depends on the disc or TV type. It may not work with some discs or TVs.
1. With the unit in Stop mode, press the MENU button.
Language Setup
No Disc
Disclaimer
Audio Setup
Setup
Display Setup
● display setup
HDMI Setup
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
Network Setup
Parental Setup
. Press the ▲▼ buttons to select Display Setup, then
press the ENTER or ▶ button.
Video setup menu will be displayed.
. Press the ▲▼ buttons to select the desired display option
from the options on the following pages.
. Press the ▲▼ buttons to select the desired sub-menu
item from a video display option, then press the ENTER
button.
Language Setup
No Disc
Disclaimer
Audio Setup
Setup
Display Setup
TV Aspect
: 16:9 Normal
HDMI Setup
Movie Frame (24 Fs)
: Off
Network Setup
Resolution
: 1080i
Parental Setup
Screen Message
: On
Front Display
: Bright
. Each video option is described in detail below.
M`
Press the RETURN or ◀ button to return to the previous menu. Press the MENU button to exit the menu.
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box :
Select when you want to see the total 16:9
ratio screen Blu-ray Disc/DVD supplies,
even though you have a TV with a 4:3 ratio
screen. Black bars will appear at the top
and bottom of the screen.
Language Setup
No Disc
Disclaimer
Audio Setup
Setup
Display Setup
TV Aspect
HDMI Setup
Movie Frame (24 Fs)
Network Setup
Resolution
4:3 Pan-Scan
: Off
16:9 Wide
: 1080i
16:9 Normal
Parental Setup
Screen Message
: On
Front Display
: Bright
• 4:3 Pan-Scan :
Select when you want to see the 16:9 video
supplied by the Blu-ray Disc/DVD without the
black bars on top and bottom, even though you
have a TV with a 4:3 ratio screen(Extreme left and
right portion of the movie picture will be cut off).
4:3 Wide
Letter Box
: 16:9
• 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
• 16:9 Normal :
Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture) if
16:9 normal is selected.
M`
Depending on the disc type, some aspect ratios may not be available.
` If you select an aspect ratio which is different than the aspect ratio of your TV screen, then the picture might
appear to be distorted.
English _39
display setup
Movie Frame (24 Fs)
Movies are usually filmed at 24 frames per second. Some Bluray discs have the capability of playing back at this frame rate.
Setting the Movie Frame (24Fs) feature to ON allows you to
adjust the Blu-ray Disc Player's HDMI output to 24 frames per
second for improved picture quality.
Language Setup
No Disc
Disclaimer
Audio Setup
TV Aspect
: 16:9 Wide
Setup
Display Setup
Movie Frame (24 Fs)
: Off
On
HDMI Setup
Resolution
Off
: 1080i
Network Setup
Screen Message
: On
Parental Setup
Front Display
: Bright
You can enjoy the Movie Frame (24Fs) feature only on a TV
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of frame rates may be included: Movie material (24 frame) and Video
material (30 frame). When the setting switches between Movie( 24 frame) and Video (30 frame), the
screen may blink for a few seconds.
Resolution
Sets the output resolution of the Component and HDMI video signal.
~ The number in 480i, 480p, 720p, 1080p and 1080i indicates
the number of lines of video. The i and p indicate interlace
and progressive scan, respectively.
No Disc
Language Setup
TV Aspect
: 16:9 Wide
Disclaimer
Audio Setup
Movie Frame (24 Fs)
: Off
Setup
Display Setup
Resolution
: 1080p
HDMI Setup
Screen Message
Network Setup
Front Display
-1080p : Outputs 1080 lines of progressive video
(HDMI only).
Parental Setup
1080i
: On
720p
: Bright
480p
480i
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines of progressive video.
-480i : Outputs 480 lines of interlaced video (Component only).
If the connected TV does not support Movie Frame or the
selected resolution, you will see the following message:
If you select "Yes" and the resolution is not supported, the
TV's screen will be blank. Please wait for 15 seconds and
the resolution will be reverted to the previous value
automatically.
M`
Disclaimer
No Disc
Setup
!
Language Setup
TV Aspect
: 16:9 Wide
Audio Setup
Movie Frame (24 Fs)
: Off
Setup
If Display
no pictures
are shownResolution
after the selection,
please wait for 15 seconds. And then,
theHDMI
resolution
Setup will be reverted
Screen Message
to the previous value automatically.
Parental Setup
Front Display
Would you like to make a selection?
System Upgrade
Yes
: 1080p
: On
: Bright
No
If the screen is blank, press and hold the ] button on the front of the player for more than 5 seconds
(no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to
access each mode and select the Display Setup that your TV will support.
` When the factory default settings are restord, all the user data stored in the persistent storage will be deleted.
40_ display setup
❖ Resolution according to the output mode
~ Blu-ray Disc playback
Component
(HDMI&Comp. connected / Comp. connected only)
Video
1080p, Movie Frame(24Fs) off
1080p@60F
1080i
480i
1080p/1080i, Movie Frame (24Fs) on
1080p@24F
480i / 1080i
480i
1080i, Movie Frame (24Fs) off
1080i
1080i
480i
720p
720p
720p
480i
480p
480p
480p
480i
480i
480p
480i
480i
HDMI
Component
(HDMI&Comp. connected / Comp. connected only)
Video
1080p
1080p@60F
480i / 480p
480i
1080i
1080i
480i / 480p
480i
720p
720p
480i / 480p
480i
480p
480p
480i / 480p
480i
480i
480p
480i
480i
~ DVD playback
Output
Setup
M`
In DVD playback, if both HDMI and Component jacks are connected but you are currently viewing component
output, the Display Setup menu will show the output resolution as 1080p. The resolution is actually 480i.
` This player has the HDMI Auto Detect Feature. When the player is first connected to a TV via HDMI, the player's
output will be set automatically to HDMI.
` If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or Movie Frame (24Fs).
` The Blu-ray Disc must have the 24 frame feature in order to use the Movie Frame (24Fs) mode.
Screen Message
~ On : Displays messages related to operation mode.
~ Off : Does not display messages related to operation mode.
No Disc
Language Setup
Movie Frame (24 Fs)
: Off
Disclaimer
Audio Setup
Resolution
: 1080i
Setup
Display Setup
Screen Message
: On
On
HDMI Setup
Front Display
Off
: Bright
Network Setup
Parental Setup
Front Display
~ Automatic : Display is dim during playback and bright when
the unit is in Stop mode.
~ Dim : Select to dim the display window.
~ Bright : Select to brighten the display window.
No Disc
Language Setup
Resolution
: 1080i
Disclaimer
Audio Setup
Screen Message
: On
Setup
Display Setup
Front Display
: Bright
Automatic
HDMI Setup
Dim
Bright
Network Setup
Parental Setup
English _41
● display setup
HDMI
Output
Setup
HDMI setup
Setting up the HDMI setup options
1. With the unit in Stop mode, press the MENU button.
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
Audio Setup
No Disc
Disclaimer
Display Setup
Setup
HDMI Setup
Network Setup
. Press the ▲▼ buttons to select HDMI Setup, then press
the ENTER or ▶ button.
HDMI setup menu will be displayed.
Parental Setup
. Press the ▲▼ buttons to select the desired display option
(Anynet or Format), then press the ENTER or ▶ button.
Anynet+ (HDMI-CEC) (Only Samsung products)
When HDMI is set to on, you can operate the Anynet+ function.
~ On : Anynet+ functions will work.
~ Off : Anynet+ function will not work.
Audio Setup
No Disc
Disclaimer
Display Setup
Setup
HDMI Setup
Anynet+ (HDMI-CEC) : On
Network Setup
HDMI Format
Off
: TV
Parental Setup
Sharpness
: Off
DVD Noise Reduction : Off
What is Anynet+?
Anynet+ is a convenient function that offers linked operations
with other Samsung products with the Anynet+ feature.
You can operate this unit using a Samsung TV remote control or power on your Samsung TV and Home
theater and start disc playback simply by pressing the PLAY button on the TV’s remote.
M`
This function is not available if the HDMI cable does not support CEC.
To use Anynet+
1. Connect the Blu-ray Disc Player to a Samsung TV with an HDMI cable. (See pages 20~21)
2. Set the Anynet+ (HDMI CEC) to “On” on your Blu-ray Disc Player.
3. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
Anynet+ Functions
~ One touch play
You can power on your Samsung TV and Home Theater, and play the disc in this unit simply by
pressing the PLAY button on the TV’s remote.
~ One touch watching
Select “Watching Blu-ray Disc Player" or "Connected to Blu-ray Disc Player" (depending on your TV's
menu) in the Anynet+ menu on the TV. The Blu-ray Disc Player will automatically turn on and the TV will
be switched to HDMI mode.
~ Remote control Link
You can operate this player with your Samsung TV remote control.
~ Available buttons on the Samsung TV remote: These buttons work the same as this Blu-ray Disc
player's remote control.
- Playback control buttons :
- Menu operation button :
- Numeric buttons :
- Color buttons : A B C D
RETURN
ENTER
RETURN
ENTER
EXI T
EXI T
RETURN
ENTER
EXI T
ENTER
ENTER
ENTER
42_ HDMI setup
A
B
C
D
A
B
C
RETURN
RETURN
EXI
EXI
TT
D
ENTER
ENTER
RETURN
RETURN EXI TEXI T
M`
● HDMI setup
TV Anynet+ Menu
When you press the Anynet+ button on your Samsung TV's
n
BD Player
remote control, the following On-Screen Display (OSD) will be
View TV
Select Device
shown.
Record
~ Blu-ray Disc Player Menu
Menu on Device
Device Operation
- When playing a movie : brings up the disc’s menu (same
Receiver : Off
Setup
as DISC MENU button on the Blu-ray Disc Player’s
>Move
sEnter
remote control)
eExit
- In Stop mode : brings up the SETUP menu (same as the
MENU button on the Blu-ray Disc Player’s remote control.)
~ Blu-ray Disc Player Operation Menu
- When playing a DVD VIDEO, DVD-RW/-R, BD-ROM, BD-RE :
shows INFO OSD (same as INFO button on the player's remote control)
These menus may look different depending on your Samsung TV.
HDMI Format
You can optimize the HDMI output for connection to a TV or
Monitor.
• TV : Select if connected to a TV via HDMI.
Audio Setup
No Disc
Disclaimer
Display Setup
Anynet+ (HDMI-CEC) : On
Setup
HDMI Setup
HDMI Format
: TV
Network Setup
Sharpness
Monitor
: Off
Parental Setup
DVD Noise Reduction : Off
Audio Setup
Anynet+ (HDMI-CEC) : On
• Monitor : Select if connected to a Monitor via HDMI.
If the player is connected to a TV, the Monitor option is
unavailable.
M`
TV or monitor has to be connected to the player before you select this option.
Sharpness
To adjust the sharpness of the picture.
(Off, Low, Middle, High)
No Disc
Disclaimer
Display Setup
HDMI Format
: TV
Setup
HDMI Setup
Sharpness
: Off
High
Network Setup
Middle
DVD Noise Reduction : Off
Low
Parental Setup
Off
DVD Noise Reduction
This setting can be used to reduce image noise on DVD discs
on the screen.(Off, Low, Middle, High)
This feature does not work with Blu-ray Discs.
No Disc
Audio Setup
HDMI Format
: TV
Disclaimer
Display Setup
Sharpness
: Off
Setup
HDMI Setup
DVD Noise Reduction : Off
High
Network Setup
Parental Setup
Middle
Low
Off
English _43
parental setup
Setting up the Parental Lock
The Parental Lock function works in conjunction with Blu-ray Disc/DVDs that have been assigned a rating which
helps you control the types of Blu-ray Disc/DVDs that your family watches. There are up to 8 rating levels on a disc.
hZ
1. With the unit in Stop mode, press the MENU button.
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
HDMI Setup
No Disc
Disclaimer
Network Setup
Setup
Parental Setup
HDMI Setup
. Press the ▲▼ buttons to select Parental Setup, then
Network Setup
Disclaimer
press the ENTER or ▶ button.
Parental Setup
Setup
Setup
When you operate your Blu-ray Disc Player for the first time, the “Enter Parental
New
password” message will
Enter New password.
be displayed.
No Disc
- Number
. Enter the 4-digit password using the number buttons on
the remote control.
The “Confirm the password” message will be displayed.
Enter your password again.
r Return
HDMI Setup
Disclaimer
No Disc
Network Setup
Parental Setup
Setup
Parental Setup
Confirm the password.
- Number
r Return
HDMI Setup
. Press the ENTER or ▶ button to select Parental Lock.
No Disc
Disclaimer
Network Setup
Setup
Parental Setup
Parental Lock
: Off
Rating Level
: 1 (Kids)
New Password
. Press the ▲▼ buttons to select On or Off, then press the
ENTER button.
M`
Press the RETURN or ◀ button to return to the previous menu. Press the MENU button to exit the menu.
If you forgot your password
1. Remove the disc.
. Press and hold the
button on the front panel for 5 seconds or more.
~ All settings will revert to the factory settings.
M`
When the factory default settings are restored, all the user data stored in the persistent storage will be deleted.
44_ parental setup
Setting the Rating Level
1. Press the ▲▼ buttons to select Rating Level, then press
the ENTER or ▶ button.
HDMI Setup
No Disc
Disclaimer
Network Setup
Parental Lock
: Off
Setup
Parental Setup
Rating Level
: 8 (Adults)
7
6
5
4
3
2
1 (Kids)
. Press the ▲▼ buttons to select the rating level you want,
then press the ENTER button. For example, if you select
up to Level 6, discs that contain Level 7, 8 will not play.
A larger number indicates that the program is intended for
adult use only.
Level 1 is the most restrictive and Level 8 is the least.
HDMI Setup
No Disc
Disclaimer
Network Setup
Parental Lock
: Off
Setup
Parental Setup
Rating Level
: 1 (Kids)
New Password
Changing the Password
1. Press the ▲▼ buttons to select New Password, then
press the ENTER or ▶ button.
No Disc
. Enter the 4-digit password using the number buttons on
the remote control. The “Enter New password.” message
will be displayed.
HDMI Setup
Parental Lock
: Off
Disclaimer
Network Setup
Rating Level
: 1 (Kids)
Setup
Parental Setup
New Password
HDMI Setup
Parental Lock
: Off
Network Setup
Rating Level
: 1 (Kids)
Disclaimer
No Disc
Parental Setup
Setup
Parental Setup
New Password
Enter New password.
- Number
. Enter your password again using the number buttons on
the remote control.
Disclaimer
No Disc
r Return
HDMI Setup
Parental Lock
: Off
Network Setup
Rating Level
: 1 (Kids)
Parental Setup
Setup
Parental Setup
New Password
Confirm the password.
- Number
r Return
English _45
● parental setup
New Password
network setup
You can update your player via Samsung’s server.
Follow the steps below to ensure the best connection to Samsung's server for your
player.
To obtain information on the proper settings, check the network settings on your computer or
contact your Internet provider.
TCP/IP Setting
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
Display Setup
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
No Disc
Disclaimer
HDMI Setup
Setup
Network Setup
TCP/IP
Parental Setup
Proxy
NTP Server
. Press the ▲▼ buttons to select Network Setup, then
press the ENTER or ▶ button.
: Off
MAC Address
BD-LIVE Internet
Connection
: Allow (Valid Only)
. Press the ▲▼ buttons to select TCP/IP, then press the
ENTER or ▶ button.
. Press the ▲▼ buttons to select DHCP, then press the
ENTER button.
Display Setup
HDMI Setup
Disclaimer
TCP/IP
Setup DHCP Network Setup
: On
No Disc
IP Address
M`
If DHCP is set to On, you can't select IP Address, Subnet
Mask or Gateway.
:
TCP/IP
000 .
000 .
000 .
000
Parental Setup
Subnet Mask
: 255 .
Proxy
255 . 255 . 000
Gateway
:
000 .
000 .Server
000 . 000
NTP
DNS
:
Automatic
Primary DNS
:
000 .
:
000 .
Secondary DNS
Save
000 .
000 .
000
Cancel
s Select
` If DNS is set to Automatic, you can’t select Primary/
: Off
MAC Address
000 . 000
000 .
r Return
Secondary DNS.
. Press the ▲▼ buttons to select a desired item, then press the ENTER button.
~ If DHCP is set to Off and, DNS to
Manual, enter your IP Address,
Subnet Mask, Gateway and Primary
DNS settings (Secondary DNS is
optional).
HDMI Setup
Parental Setup
Disclaimer
TCP/IP
No Disc
System Information
Setup DHCP System Upgrade
: Off
Network Setup
IP Address
:
000 .
000 .
Subnet Mask
:
255 .
Upgrade
Start. 000
255 . 255
Gateway
:
000 .
000 . 000 . 000 N : Off
Modem(28.8Kbps)
DNS
:
:
000 .
:
000 .
000 .
000 .
000
000 .
000 .
000
Setup available
Cancel
s Select
r Return
HDMI Setup
Parental Setup
Disclaimer
TCP/IP
No Disc
System Information
Setup DHCP System Upgrade
: On
Network Setup
IP Address
:
000 .
000 .
000 .
000
Subnet Mask
:
255 .
255 .
255 .
000
Gateway
:
000 .
000
. 000 . 000 N : Off
Modem(28.8Kbps)
DNS
:
Manual
Primary DNS
:
000 .
:
000 .
Secondary DNS
Save
000 .
000 .
000
000 .
000 .
000
Setup not available
Setup available
Cancel
s Select
~ If DHCP is set to On and, DNS to
Automatic, you don’t need further or
additional settings.
r Return
HDMI Setup
Parental Setup
Disclaimer
TCP/IP
No Disc
System Information
Setup DHCP System Upgrade
: On
Network Setup
IP Address
:
000 .
000 .
Subnet Mask
:
255 .
Upgrade
Start. 000
255 . 255
Gateway
:
000 .
000 . 000 . 000 N : Off
Modem(28.8Kbps)
DNS
:
000 .
000
Automatic
Primary DNS
:
000 .
000 .
000 .
000
Secondary DNS
:
000 .
000 .
000 .
000
Save
Cancel
s Select
46_ network setup
000
Manual
Primary DNS
Secondary DNS
Save
~ If DHCP is set to On and, DNS to
Manual, enter your Primary DNS
setting (Secondary DNS is optional).
000 .
r Return
Setup not available
M`
When you select an item, use the number and ▲▼◀▶ buttons.
` If the automatic settings don’t work, contact your ISP.
. If you don’t want to save your work, use the ▲▼◀▶ buttons to select Cancel, then press the
ENTER button.
M`
The IP address used in this manual is for illustrative purposes only. You must refer to the your network settings
for the actual IP address.
` To obtain settings for IP address, Subnet mask, Gateway and Primary DNS, check the network settings in your
computer or contact your internet service provider.
Proxy Setting
A proxy server services requests by forwarding them to other servers.
If you are required to configure the proxy setting, enter the settings specified by the ISP.
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 46.
. Press the ▲▼ buttons to select Proxy, then press the
ENTER or ▶ button.
~ Server
~ Port
~ User
~ Password
M`
Display Setup
No Disc
Disclaimer
Proxy
HDMI Setup
TCP/IP
Setup
Proxy
Network Setup
: Off
Proxy
:
Parental Setup
: 8080
NTP Server
Server
Port
User
Password
:
: Off
MAC Address
:
Save
Cancel
s Select
r Return
For more information, contact your ISP (Internet Service Provider).
NTP Server Setting (Used to Retrieve Time Information
from NTP Server)
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 46.
. Press the ▲▼ buttons to select NTP Server , then press
the ENTER or ▶ button.
~ On : the player automatically connects to the Internet
server in order to adjust the time setting.
~ Off : the player does not connect to the Internet server
to adjust the time setting.
No Disc
Display Setup
TCP/IP
Disclaimer
HDMI Setup
Proxy
Setup
Network Setup
NTP Server
Parental Setup
MAC Address
BD-LIVE Internet
Connection
: Off
On
Off
: Allow (Valid Only)
English _47
● network setup
. When done, use the ▲▼ buttons to select Save, then press the ENTER button.
network setup
Mac Address
Displays the MAC address of the player.
A MAC address(Media Access Control address) is a unique identifier attached to most network adapters.
It is a address that acts like a name for a particular network adapter. It cannot be changed.
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
Disclaimer
No Disc
Setup
Display Setup
Proxy
HDMI Setup
NTP Server
Network Setup
MAC Address
Parental Setup
MAC Address
Network Setup
00 : 16 : 6c : 1a Upgrade
: 7a : f1 Start
. Press the ▲▼ buttons to select Network Setup, then
press the ENTER or ▶ button.
OK
. Press the ▲▼ buttons to select Mac Address, then press
the ENTER or ▶ button.
The MAC address appears.
M`
Samsung shall not be responsible for any malfunction or failed operation due to Internet connection failure or a
communication error. Samsung is also not responsible for failure of the user’s Internet connection.
` You may not be able to access some Internet services depending on the limitations of your Internet service
provider.
` Any fee charged for Internet connection is solely your responsibility.
` A DSL modem is needed to use DSL service. You may have agreed with your ISP (Internet Service Provider) on
the number of concurrent internet connection devices. Under the agreement, your PC and Blu-ray Disc Player
may not use the network simultaneously.
` You may not be allowed to use a router under your ISP’s policy.
BD-LIVE Internet Connection
The Internet connection may be restricted while you are using BD-LIVE contents.
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
No Disc
Display Setup
NTP Server
Disclaimer
HDMI Setup
MAC Address
Setup
Network Setup
BD-LIVE Internet
Connection
Parental Setup
: Off
: Allow
(All)(All)
Allow
Allow (Valid Only)
Prohibit
. Press the ▲▼ buttons to select Network Setup, then
press the ENTER or ▶ button.
. Press the ▲▼ buttons to select BD-LIVE Internet
Connection, then press the ENTER or ▶ button.
~ Allow (All) : The Internet connection will be allowed for all BD LIVE contents.
~ Allow (Valid Only) : The Internet connection will be allowed only for BD-LIVE contents containing
a valid certificate..
~ Prohibit : No Internet connection will be allowed for any BD LIVE content.
48_ network setup
persistent storage management
Persistent Storage (Internal Flash Memory : Approx.1G Byte) is built-in memory
on the player for storing Blu-ray Disc content. Persistent Storage (Internal Flash
Memory : Approx.1G Byte) is where additional content such as trailers and other
special features downloaded from Blu-ray discs is stored on the player.
You can manage user data stored in persistent storage.
1. With the unit in Stop mode, press the MENU button.
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
Clock Set
Power On/Off sound : On
Disclaimer
No Disc
Setup
System Setup
Persistent Storage Management
Language Setup
System Update
Audio Setup
. Press the ▲▼ buttons to select System Setup, then
press the ENTER or ▶ button.
Display Setup
HDMI Setup
Network Setup
. Press the ▲▼ buttons to select Persistent Storage
Management, then press the ENTER or ▶ button.
- To format the flash memory Use the ▲▼ button to select an internal/external flash
memory that you want to format and press the YELLOW
(C) button.
Parental Setup
BD
Persistent Storage Management
Internal Flash Memory
Select Device
External Flash Memory
• Total Size
953(MB)
• Available Size
889(MB)
Description of Device(Storage) Information on the Player
b Set Default
c Format
r Setup
~ Total Size : Total size of the Device(Storage).
~ Available Size : Available size of the Device(Storage).
M
` Memory size information on the current device(storage) is located to the right of the PSM menu.
` In the external memory mode, disc playback will be stopped if you disconnect the USB device in the middle of the
playback.
` It is recommended to use an USB device that supports USB 2.0 protocols, FAT32 format and 4MB or more read /
write speed.
` The function of Resume Play may not work after formatting the storage device.
English _49
● persistent storage management
System Device Management
system upgrade
Samsung may offer upgrades to your Blu-ray Disc Player's firmware in the future. To upgrade this firmware you must :
1. Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest firmware.
You can use a CD-R or a USB flash drive to perform the firmware upgrade. For more information, see “Upgrade
Manual” at the website mentioned above.
or
2. Connect this player's LAN terminal to the LAN terminal on your modem (see page 29) and follow the steps below.
Firmware Upgrade
1. With the unit in Stop mode/No Disc mode, press the MENU
button.
Disclaimer
No Disc
System Setup
Setup
. Press the ▲▼ buttons to select Setup, then press the ENTER
or ▶ button.
Language Setup
Audio Setup
Display Setup
HDMI Setup
. Press the ▲▼ buttons to select System Setup, then press the
ENTER or ▶ button.
Network Setup
Parental Setup
Power On/Off sound : On
. Press the ▲▼ buttons to select System Update, then press
the ENTER or ▶ button.
Persistent Storage Management
Disclaimer
No Disc
System Setup
Setup
System Update
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
. The player will check the cable or network connection status
automatically. The connection checking window will be displayed.
Power On/Off sound : On
Persistent Storage Management
Disclaimer
No Disc
Setup
System Setup
System Update
System Update
1 2 3 4
Language Setup
Audio Setup
Now, Checking.
Display Setup
Please wait...
HDMI Setup
Network Setup
Parental Setup
@ If the upgrade is possible : You will see information on the
current and new versions of firmware in a message box.
Power On/Off sound : On
Persistent Storage Management
Disclaimer
No Disc
Setup
System Setup
System Update
System Update
1 2 3 4
Language Setup
The new update data was found.
Audio Current
Setup Version : XXXXX
Display New
SetupVersion : XXXXX
HDMI Setup
Start
Cancel
Network Setup
@ If the upgrade is not possible : You will see the following
description in the message box.
~ If the cable is not connected :
“Ethernet cable is not connected. Please, check the
Ethernet cable”
~ If the network connection has failed :
“This system can not connect to internet for update.
OK
Please, check the network setup”
~ If no latest version is released (the latest version has been
already installed) :
"The latest version of the firmware is already installed.
There is no need to update."
~ If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.
~ If the server service is not available :
“ Update Server is under maintenance. Please try again later.”
Parental Setup
Power On/Off sound : On
Persistent Storage Management
Disclaimer
No Disc
Setup
System Setup
System Update
System Update
1 2 3 4
Language Setup
This system can not connect
Audio
to Setup
internet for update.
Please,
Display
Setupcheck the network setup.
HDMI Setup
Network Setup
Parental Setup
50_ system upgrade
. To perform the system upgrade, press the ◀▶ buttons to
select Start and then press the ENTER button.
Power On/Off sound : On
Persistent Storage Management
Disclaimer
No Disc
Setup
System Setup
System Update
1 2 3 4
System Update
Language
Setup data was found.
The new update
AudioCurrent
Setup Version : XXXXX
New Version : XXXXX
Display Setup
HDMI Start
Setup
Cancel
Network Setup
Parental Setup
. The system update gets started.
Power On/Off sound : On
Persistent Storage Management
No Disc
Setup
System Setup
System Update
System Update
1 2 3 4
Language Setup
Downloading update data...
Audio
Please,Setup
do not turn off the power.
60%
Display Setup
HDMI Setup Cancel
Network Setup
Parental Setup
. If you select Cancel during the download process, you are
prompted to confirm your selection in a message box.
If you want to cancel the download, select Yes and press the
ENTER button.
Power On/Off sound : On
Persistent Storage Management
Disclaimer
No Disc
Setup
System Setup
System Update
System Update
1 2 3 4
Language Setup
Do you
wantSetup
to cancel the update operation?
Audio
Display Setup
Yes
HDMI Setup
No
Network Setup
Parental Setup
. Verification will proceed. When download is done, the firmware
update process will begin automatically.
Power On/Off sound : On
Persistent Storage Management
Disclaimer
No Disc
Setup
System Setup
System Update
System Update
1 2 3 4
Language Setup
Verifying update data
AudioPlease
Setup wait.
Display Setup
HDMI Setup
Network Setup
Parental Setup
10. When the installation is done, the player will automatically turn
off in 5 seconds.
All settings will revert to the factory settings the next time you
start the system and you will see the menu language selection
window.
Power On/Off sound : On
Persistent Storage Management
Disclaimer
No Disc
Setup
System Setup
System Update
System Update
1 2 3 4
Firmware
Language
SetupUpdate.
Now, Processing...
Audio Setup
Please, do not turn off the power.
Display
TheSetup
power will be off automatically
update is finished.
HDMIafter
Setup
Network Setup
Parental Setup
M`
If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button.
You will see a confirmation message.
Selecting "Yes" will end the upgrade process, and selecting "No" will continue the upgrade process.
` When the system upgrade is done, check the firmware details in the System Upgrade menu.
` Do not turn off the player during the System Upgrade, as it may cause the player to not work properly.
` Software upgrades using the USB Host jack supports only a USB flash drive.
Other USB devices(ex. MP3 player) are not guaranteed to work.
` There should be only one firmware upgrade file in USB flash drive for the player to perform upgrade properly.
` Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.
English _51
● System Upgrade
Disclaimer
system upgrade
System Information
When the firmware upgrade is done, check the firmware details by following the steps below.
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
. Press the ▲▼ buttons to select Setup, then press the
ENTER or ▶ button.
Disclaimer
No Disc
System Setup
Setup
Language Setup
Audio Setup
. Press the ▲▼ buttons to select System Setup, then
press the ENTER or ▶ button.
Display Setup
HDMI Setup
Network Setup
Parental Setup
. Press the ▲▼ buttons to select System Information,
then press the ENTER or ▶ button.
You can see detailed information about the current
firmware.
Disclaimer
No Disc
Setup
System Setup
System Information
Language Setup
Time Zone
Audio Setup
Clock Set
Display Setup
Power On/Off sound : On
HDMI Setup
Persistent Storage Management
Network Setup
System Update
Parental Setup
. Press the ENTER button to select OK.
System Setup menu will be displayed.
Disclaimer
No Disc
Setup
System Setup
System Information
System Information
Language Setup
Clock Set
S/W : XXXXXX_XXXX
Audio
Setup
Region
: A/1 (BD/DVD)Time Zone
Display Setup
HDMI Setup
Network Setup
Power On/Off sound : On
OK
Persistent Storage Management
System Update
Parental Setup
Firmware upgrade notification
The popup menu appears when a newer version of the firmware is available from SAMSUNG update server than
that of the Blu-ray Disc Player, if the Blu-ray Disc Player is connected to network and powered on.
~ YES: Select this to upgrade now.
~ NO: Select this if you plan to upgrade later.
System Update
New Firmware is released.
Do you want to update now?
Yes
52_ system upgrade
No
watching a movie
Using the Display Function
hgfZCV
. Press the ▲▼ buttons to select the desired item.
BD
Info
Title
: 001/006
Chapter
: 001/016
Playing Time : 00:04:17
Audio
: 1/1 ENG 2CH
Subtitle
: 0/1 Off
Angle
: 01/01
� Change
s Select
. Press the ◀▶ buttons to make the desired setup change
and then press the ENTER button.
~ You may use the number buttons of the remote control to <INFO menu for the BONUSVIEW section>
directly access a title, chapter or to start the playback
BD
Info
from a desired time.
. To make the screen disappear, press the INFO button again.
Title
: 001/006
Chapter
: 001/016
Playing Time
: 00:04:17
Audio
: 1/1 ENG 2CH
Subtitle
: 0/1 Off
Angle
: 01/01
BONUSVIEW Video
: 01/01
BONUSVIEW Audio
: 1/1 ENG 2CH
� Change
M`
s Select
If you are playing contents from the info menu, some functions may not be enabled depending on the disc.
` Title : To access the desired title when there is more than one in the disc. For example, if there is more than
one movie on a Blu-ray Disc/DVD, each movie will be identified as a Title.
` Chapter: Most Blu-ray Disc/DVD discs are recorded in chapters so that you can quickly find a specific chapter.
` Audio : Refers to the film's soundtrack language. A Blu-ray Disc can contain up to 32 audio languages and a
DVD up to 8.
` Playing Time : Allows playback of the film from a desired time. You must enter the starting time
as a reference. The time search function does not operate on some discs.
` Subtitle : Refers to the subtitle languages available in the disc. You will be able to choose the subtitle
languages or, if you prefer, turn them off from the screen. A Blu-ray Disc can contain up to 255 subtitle
languages, and a DVD up to 32.
` Angle : When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
` BONUSVIEW Video/ BONUSVIEW Audio : You can make BONUSVIEW Video or BONUSVIEW Audio settings if the
current title of a Blu-ray Disc appears in the BONUSVIEW section. The BONUSVIEW Video / BONUSVIEW Audio
options, however, will be disabled with a Blu-ray Disc that does not support the BONUSVIEW feature.
English _53
● watching a movie
1. During playback, press the INFO button on the remote
control.
~ If the current title of a Blu-ray Disc has the BONUSVIEW
feature, press the INFO button in the BONUSVIEW
section to display BONUSVIEW-related information.
watching a movie
Using the Disc Menu & Popup/Title Menu
hZ
Using the Disc Menu
1. During playback, press the DISC MENU button on the
remote control.
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
. Press the ▲▼◀▶ buttons to make the desired selection,
then press the ▶ or ENTER button.
~ The Disc menu setup items may vary from disc to disc.
%
3
M`
4
5
6
7
8
9
10
11
12
13
14
15
Depending on the disc, the Disc Menu may not be available.
Z
Using the Title Menu
1. During playback, press the TITLE MENU button on the remote control.
. Press the ▲▼◀▶ buttons to make the desired selection, then press the ENTER button.
~ The Title menu setup options may vary from disc to disc.
M`
Depending on the disc, the Title Menu may not be available.
` Title Menu will only be displayed if there are at least two titles in the disc.
gf
Playing the Title List
1. With the unit in Stop mode/Playback mode, press the
DISC MENU or TITLE MENU button.
. Press the ▲▼ buttons to select an entry you want to play
from Title List, then press the ▶ or ENTER button.
The selected entry (title) will be played back.
BD
RE
Video
Music
Netflix
Disclaimer
Setup
Title 007
00:03:32
Title 008
00:04:36
Title 009
00:04:17
Title 010
00:04:11
Title 011
00:04:07
Title 012
00:04:46
Title 013
Title 014
00:04:21
00:03:43
[/] Page
- Go to Playlist To go to the Playlist, press the RED(A) button
54_ watching a movie
h
Using the Popup Menu
1. During playback, press the POPUP MENU button on the
remote control.
MAIN MENU
AUDIO SET UP
%
3
M`
SCENE SELECTIONS
4
5
6
7
8
9
10
11
12
13
14
15
Depending on the disc, the Popup Menu may not be available.
Repeat Play
Repeat the current chapter or title.
Repeat playback
hgfZCV
1. During playback, press the REPEAT button on the remote
control. Repeat screen appears.
Repeat
Off
. Press the ▲▼ buttons to select Chapter or Title.
~ Blu-ray Disc/DVD repeats play by chapter or title.
. To return to normal play, press the REPEAT button again, then press the ▲▼ buttons to select Off.
M`
Depending on the disc, the Repeat function may not be available.
Using the A-B Repeat function
hgfZCV
1. Press the REPEAT A-B button on the remote control during playback.
2. Press the REPEAT A-B button at the point where you want repeat play to start (A).
3. Press the REPEAT A-B button at the point where you want repeat play to stop (B).
4. To return to normal play, press the CANCEL button.
M`
Point B cannot be set until 5 seconds of playback has elapsed from point A.
English _55
● watching a movie
. Press the ▲▼◀▶ buttons or ENTER button to select
the desired menu.
~ The Popup menu setup options may vary from disc to
disc.
SUBTITLES
watching a movie
hgfZ
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button
1. Press the AUDIO button during playback. The Audio
changes when the button is pressed repeatedly.
~ The audio languages are represented by abbreviations.
Audio
1/4 ENG Dolby Digital Multi CH
. To remove the AUDIO icon, press the CANCEL or RETURN button.
Using the INFO button
1. During playback, press the INFO button on the remote control.
2. Press the ▲▼ buttons to select Audio language.
3. Press the ◀▶ buttons on the remote control to select the desired audio language.
M`
This function depends on what audio languages are encoded on the disc and may not be available.
` A Blu-ray Disc can contain up to 32 audio languages and a DVD up to 8.
` Depending on the disc type, you can use the Audio button to change the audio soundtrack as well as the audio
language.
Some Blu-ray Discs may allow you to select either the multi-channel LPCM or Dolby digital audio soundtrack in
English.
` Information about the primary / secondary mode will be also displayed if the Blu-ray Disc has a BONUSVIEW
section.
Use the ◀▶ button to switch between primary and secondary audio modes.
` The ◀▶ indicator will not be displayed on the screen if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
56_ watching a movie
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
1. Press the SUBTITLE button. The subtitle changes when
the button is pressed repeatedly. The subtitle languages
are represented by abbreviations.
Subtitle
1/ 7ENG
. To remove the SUBTITLE icon, press the CANCEL or
RETURN button.
Using the INFO button
1. During playback, press the INFO button on the remote control.
2. Press the ▲▼ buttons to select Subtitle.
3. Press the ◀▶ buttons on the remote control to select the desired subtitle language.
M`
Depending on the Blu-ray Disc /DVD, you may be able to change the desired subtitle in the Disc Menu. Press
the DISC MENU button.
` This function depends on what subtitles are encoded on the disc and may not be available on all Blu-ray Disc /DVDs.
` A Blu-ray Disc can contain up to 255 subtitle languages and a DVD up to 32.
` Information about the primary / secondary mode will be also displayed if the Blu-ray Disc has a BONUSVIEW
section.
` This function changes both the primary and secondary subtitles at the same time.
` The number of subtitles is the sum of primary and secondary ones.
Changing the Camera Angle
When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE function.
hZ
Using the ANGLE function
1. During playback, press the INFO button on the remote control.
. Press the ▲▼ buttons to select Angle.
. Press the ◀▶ buttons or you can use the number buttons
on the remote control to select the desired angle.
BD
: 001/006
Chapter
: 001/016
Playing Time : 00:04:17
Audio
: 1/8 ENG Multi CH
Subtitle
: Off
Angle
: 01/01
� Change
M`
Info
Title
} Move
If the disc has only one angle, this feature won’t work. Currently, very few discs have this feature.
` Depending on the disc, these functions may not work.
English _57
● watching a movie
hZ
Using the SUBTITLE button
watching a movie
BONUSVIEW Settings
The Bonusview feature allows you to view additional content (such as commentaries) in a small screen window while
the movie is playing.
If the current Blu-ray Disc features the BONUSVIEW function, you can use the BONUSVIEW button to turn
BONUSVIEW On or Off.
h
Using the BONUSVIEW button
1. If the current title of a Blu-ray Disc has the BONUSVIEW
feature, you will see the BONUSVIEW icon in the
BONUSVIEW section on the play screen.
BONUSVIEW
. Each time you press the BONUSVIEW button, you can
toggle between BONUSVIEW On and BONUSVIEW Off.
BONUSVIEW
M`
You can change detailed settings of the BONUSVIEW feature in the INFO menu (see page 53: selection of
secondary audio, video stream and subtitle etc.).
` If you switch from BONUSVIEW Video, BONUSVIEW Audio will change automatically in accordance with
BONUSVIEW Video.
` If the Blu-ray Disc supports only BONUSVIEW Audio, you can just press the BONUSVIEW button to turn the
secondary audio on or off.
BD-LIVE™
The Blu-ray player supports BD-LIVE which enables you to enjoy a variety of interactive service contents provided
by the disc manufacturer through network connection.
Using the BD-LIVE Disc
1. Connect the LAN adaptor (see page 29) and check the network setup (see pages 46 to 48).
. Insert a Blu-ray disc that supports BD-LIVE.
. Select BD-LIVE supported in the disc before you can enjoy various contents.
M ` The way you use BD-LIVE and the features may differ, depending on the disc.
58_ watching a movie
Using the Bookmark Function
This features lets you bookmark sections of a Blu-ray Disc/DVD, so you can quickly find them at a later time.
1. During playback, press the MARKER button on the remote
control.
The Bookmark screen appears.
Marker
BD
00:12:13 / 01:53:26
+
. Press the ENTER button when the desired scene appears.
The selected scene will be stored.
Add
Add
Add
Add
{ Move
. To bookmark another section, press the ◀▶ buttons to move
to the next position.
. Press the ENTER button again when the desired scene
appears.
The scene will be stored at the selected position and the
bookmark time information will be shown.
Add
Add
e Exit
00:12:21 / 01:53:26
+
T:1
00:12:17
Add
Add
Add
{ Move
Add
Add
s Play
Add
Add
e Exit
Marker
BD
00:12:33 / 01:53:26
+
T:1
00:12:17
T:1
00:12:27
Add
a Delete
M`
Add
s Add
Marker
BD
a Delete
~ Repeat above to bookmark other positions.
~ You can bookmark up to 8 scenes.
Add
Add
{ Move
Add
Add
s Play
Add
Add
e Exit
When the disc tray is opened and then closed, bookmark information will be lost.
` In some BD discs(BD-J), Bookmark function can be prohibited.
English _59
● watching a movie
hgfZCV
Using the MARKER button
watching a movie
Playing back a bookmark
1. During playback, press the MARKER button on the
remote control.
Marker
BD
00:12:21 / 01:53:26
+
T:1
00:12:17
T:1
00:12:27
Add
a Delete
Add
{ Move
Add
Add
s Play
Add
Add
e Exit
. Press the ◀▶ buttons to select a bookmarked scene.
. Press the ENTER or PLAY(
) button to start playing from the selected scene.
Clearing a bookmark
1. During playback, press the MARKER button on the
remote control.
Marker
BD
00:13:11 / 01:53:26
+
T:1
00:12:17
T:1
00:12:27
T:1
00:12:53
a Delete
. Press the ◀▶ buttons to select a bookmarked scene.
T:1
00:12:59
s Play
Add
Add
e Exit
00:13:27 / 01:53:26
+
T:1
00:12:17
T:1
00:12:27
T:1
00:12:53
T:1
00:12:55
{ Move
T:1
00:12:57
T:1
00:12:59
s Play
Add
Add
e Exit
Marker
BD
00:13:38 / 01:53:26
+
T:1
00:12:17
a Delete
60_ watching a movie
T:1
00:12:57
Marker
BD
a Delete
. Press the RED(A) button to delete the selected bookmark.
T:1
00:12:55
{ Move
T:1
00:12:27
T:1
00:12:53
T:1
00:12:55
{ Move
T:1
00:12:57
s Play
Add
Add
e Exit
Add
Using the Instant Streaming feature provided by Netflix
This Blu-ray Disc Player supports the Netflix streaming service which enables you to enjoy various movies via
network connection.
● watching a movie
1. With the unit in Stop mode/No Disc mode, press the MENU button.
. Press the ▲▼ buttons to select Netflix, then press the ENTER or ▶ button.
. If you dont have an account, select "no-start my FREE
trial" and subscribe to http://www.netflix.com/samsung
from your computer. otherwise, a user with existing
account can select the "yes-activate instant streaming
from Netflix.
. If you have an existing account, you will see the next
window if “yes” was selected. After creating your account,
select "I'm now a member"
M`
You can also start the Netflix streaming service by pressing "Red color key (A button) in Samsung LOGO Screen.
` Video resolution of the netflix contents (SD or HD) is depend on the network speed and the original bitrate of
the Netflix contents.
` When you use the Netfix streaming sevice with this Blu-ray Disc Player, refer to the LAN connection (see page 29).
` Activating (1st connection for Netflix) your Blu-ray Disc Player for Netflix, you may need a two lan cables for both PC
and the Player.
English _61
watching a movie
. Movies you added to the Instant Queue from the web are
listed.
Press the ENTER button of the remote control and select
a movie to display the next screen.
~ To add the movie in Instant Queue list of this Blu-ray
Disc Player, you can select "Add to Instant" button on
"Watch Instantly" page of Netflix web site using your PC
Movie 1
e Exit
Actor or Actress name1
Actor or Actress name2
Name
. Press the PLAY button to start the playback, and the initial
buffering of the streamed data is shown.
. Press the SCAN button to select a scene of your choice.
~ To stop the movie or go to the instant movie list, press
the upper arrow key or press stop key.
62_ watching a movie
listening to music
B
Playing an Audio CD(CD-DA)
1. Insert an Audio CD(CD-DA) into the disc tray.
The first track will be played automatically.
TRACK 001
CD
01/12
00:01:29 / 00:04:06
+
a Play Mode
. Press the ▲▼ buttons to select the track you want to
play, and then press the ENTER button.
Video
CD
Music
Netflix
Disclaimer
Setup
TRACK 001
00:03:20
TRACK 002
00:03:32
TRACK 003
00:04:36
TRACK 004
00:04:17
TRACK 005
00:04:11
TRACK 006
00:04:07
TRACK 007
00:04:46
TRACK 008
00:04:21
b Playlist
[/] Page
Audio CD(CD-DA) Screen Elements
Displays the media type.
TRACK 001
CD
+
01/12
00:01:29 / 00:04:06
Current track (song)
Displays the number of the track currently being
played.
Play Status Bar.
Displays the current play index, total track number.
a Play Mode
Current /Total Play Time.
Displays available COLOR buttons.
(see next page for Color button usage).
English _63
● listening to music
. To move to the Music List, press the STOP or RETURN
button.
The Music List screen is displayed on your TV.
listening to music
Buttons on the Remote Control used for
Audio CD (CD-DA) disc playback
1. PAUSE ( ) button: Pauses playback.
2. SKIP ( ) button: During playback, plays the next track. Moves
to the next page in the Music List or the Playlist.
3. PLAY ( ) button: Plays the currently selected track.
4. ▲▼ buttons : Selects a track(song) in the Music List or Playlist.
5. COLOR buttons: RED(A), GREEN(B), YELLOW(C)
~ RED(A) button : Selects the Play Mode(Repeat) during playback.
~ GREEN(B) button : Go to Playlist from Music List or go to
Music list from Playlist.
~ YELLOW(C) button : Playlist play.
6. ◀▶ buttons
▶ : Plays the applicable track, according to the current position.
◀ : Moves to the menu.
ENTER
7. ENTER button : Plays the selected track (song).
8. STOP ( ) button: Stops a track(song).
9. Press the SEARCH (
) buttons : Fast Play.
10. SKIP ( ) button: If you pressed this button after three seconds
of playback, the current track will be replayed from the
beginning. But,if you pressed this button within three seconds
after playback starts, the previous track will be played.
Also used to move by the page in the Music List or the Playlist.
Repeat Audio CD(CD-DA)
During playback, press the REPEAT or RED(A) button repeatedly to select the repeat mode you want.
Normal ;
;
;
~ Normal : Tracks on a disc are played in the order in which they were recorded on the disc.
~
Repeat Track
~
Random
The random option plays a disc’s track in random order.
~
Repeat All : All tracks are repeated.
- To return to normal playback Press the REPEAT or RED(A) button repeatedly to return to normal playback.
64_ listening to music
Playlist
You can create a playlist with up to 99 tracks.
. To move to the Music List, press the STOP or RETURN
button.
The Music List screen is displayed.
Video
Music
CD
Netflix
Disclaimer
Setup
TRACK 006
00:03:20
TRACK 007
00:03:32
TRACK 008
00:04:36
TRACK 009
00:04:17
TRACK 010
00:04:11
TRACK 011
00:04:07
TRACK 012
00:04:46
TRACK 013
00:04:21
TRACK 014
00:03:43
b Playlist
. Press the GREEN(B) button.
[/] Page
Music List
Playlist
Video
CD
Music
TRACK 001
Netflix
TRACK 002
Disclaimer
Setup
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
b Music List
. Press the ▲▼ buttons to select a track, then press the
ENTER button to add it to the Playlist. Repeat this
procedure to add additional tracks.
c Playlist Play
s Add
Music List
Video
CD
Playlist
TRACK 005
01.TRACK 002
Music
TRACK 006
Netflix
TRACK 007
03.TRACK 004
TRACK 008
04.TRACK 006
Disclaimer
Setup
02.TRACK 003
TRACK 009
TRACK 010
TRACK 011
TRACK 012
TRACK 013
b Music List
. If there is an undesired track in the playlist, press the ▲▼
button to select that track, and then press the ENTER
button.
~ The selected track will be deleted.
c Playlist Play
s Add
Music List
Video
CD
Playlist
TRACK 005
Music
TRACK 006
01.TRACK 002
Netflix
TRACK 007
02.TRACK 003
TRACK 008
03.TRACK 004
TRACK 009
04.TRACK 006
Disclaimer
Setup
TRACK 010
TRACK 011
TRACK 012
TRACK 013
b Music List
. Press the YELLOW(C) button to play the selected tracks.
When the track is finished, the next track will automatically
play.
TRACK 001
CD
+
c Playlist Play
s Delete
01/12
00:01:29 / 00:04:06
. To edit the Playlist, press the STOP or RETURN button.
. To go to the Music List, press the Green(B) or RETURN
button.
M`
a Play Mode
MP3 and JPEG discs cannot be played in this player.
English _65
● listening to music
1. Insert an Audio CD(CD-DA) into the disc tray.
For an audio CD, the first track will be played automatically.
troubleshooting
Before requesting service, please check the following.
PROBLEM
SOLUTION
No operation can be performed with the
remote control.
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/ DVD.
Disc Menu does not appear.
• Check if the disc has a Menu.
The
• This icon appears when an invalid button is pressed.
• The features or action cannot be completed at this time because :
1. The Blu-ray Disc/ DVD’s software restricts it.
2. The Blu-ray Disc/ DVD’s software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
icon appears on the screen.
Play mode differs from the Setup Menu
selection.
• S ome of the functions selected in the Setup Menu may not work properly
if the disc is not encoded with the corresponding function.
The screen ratio cannot be changed.
• The Screen Ratio is fixed on your Blu-ray Disc/ DVDs.
• This is not a problem with the player.
No audio.
• M
ake sure you have selected the correct Digital Output in the Audio
Options Menu.
The screen is blocked
• P ress the ] button (in front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all the user data stored in
the persistent storage will be deleted.
If the HDMI output is set to a resolution
your TV cannot support (for example,
1080p), you may not see a picture on
your TV.
• P ress the ] button (in front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all the user data stored in
the persistent storage will be deleted.
66_ troubleshooting
PROBLEM
SOLUTION
• P ress the ] button (in front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
• When the factory default settings are restored, all the user data stored in
the persistent storage will be deleted.
If you experience other problems.
• G
o to the contents and find the section of the instruction manual that
contains the explanations regarding the current problem, and follow the
procedure once again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center or call 1-800-SAMSUNG.
The picture is noisy or distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output.
• C heck the connection between the TV and the HDMI jack of the Blu-ray Disc
Player.
• Check if your TV supports 480p/720p/1080i/1080p HDMI input
resolution.
Abnormal HDMI output screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
M`
When the factory default settings are restored, all the user data stored in the persistent storage will be deleted.
English _67
● troubleshooting
Forgot password
appendix
Specifications
General
Power Requirements
AC 120V, 60Hz
Power Consumption
36 W
Weight
6.8 Ibs
Dimensions
16.9(W) × 10.6(D) × 2.3(H) inches
Operating Temperature Range
+41°F to +95°F
Operating Humidity Range
10 % to 75 %
BD (Blu-ray Disc)
Reading Speed : 4.917m/sec
DVD (Digital Versatile Disc)
Disc
CD : 5 inches (COMPACT DISC)
CD : 3 1/2 inches (COMPACT DISC)
Composite Video
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
Blu-ray/DVD Disc : 480i
Y : 1.0 Vp-p (75 Ω load)
Video Output
Component Video
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Blu-ray Disc : 1080i, 720p, 480p, 480i
Video/Audio
Audio Output
HDMI
1080p, 1080i, 720p, 480p
PCM multichannel audio, Bitstream audio
2 Channel
L(1/L), R(2/R)
7.1 Channel
F/L, F/R, R/L, R/R, C/T, S/W, SBR, SBL
Digital Audio Output
Optical
*Frequency Response
DVD : 480p, 480i
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.003%
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
68_ appendix
Compliance and Compatibility Notice
~ Because AACS (Advanced Access Content System)
is approved as content protection system for Blu-ray
Disc format, similar to use of CSS (Content
Scramble System) for DVD format, certain
restrictions are imposed on playback, analog signal
output, etc., of AACS protected contents. The
operation of this product and restrictions on this
product may vary depending on your time of
purchase as those restrictions may be adopted and/
or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection system for
Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for BDROM Mark and/or BD+ protected contents. To
obtain additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact
SAMSUNG customer care center.
~ Many Blu-ray Disc/DVD discs are encoded with
copy protection. Because of this, you should only
connect your Blu-ray Disc Player directly to your TV,
not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/
DVD discs.
~ This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation and is intended for home and other
limited viewing uses only, unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
~ This device is protected by U.S. Patent Nos. 6,836,549;
6,381,747; 7,050,698; 6,516,132; and 5,583,936.
~ Under the U.S. Copyright laws and Copyright laws
of other countries, unauthorized recording, use,
display, distribution, or revision of television
programs, videotapes, Blu-ray Discs, DVDs, and
other materials may subject you to civil and/or
criminal liability.
~ For Blu-ray Disc Players progressive scan
output : CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN
THE PICTURE. IN CASE OF PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS PRODUCT, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
NOT ALL discs are compatible
~ Subject to the restrictions described below and those noted
throughout this Manual, including the Disc Type and
Characteristics section of this Manual, disc types that can be
played are: pre-recorded commercial BD-ROM, DVD-Video, and
Audio CD discs; BD-RE, BD-R, DVD-RW / DVD-R discs; and
CD-RW/CD-R discs.
~ Discs other than the above cannot and/or is not intended to
be played by this player. And some of the above discs may
not play due to one or more reasons provided below.
~ Samsung cannot assure that this player will play every disc
bearing the BD-ROM, BD-RE, BD-R, DVD-Video, DVD-RW /
DVD-R and CD-RW/CD-R logos, and this player may not
respond to all operating commands or operate all features of
every disc. These and other disc compatibility and player
operation issues with new and existing format discs are
possible because:
- Blu-ray is a new and evolving format and this player may
not operate all features of Blu-ray Discs because some
features may be optional, additional features may have
been added to the Blu-ray Disc format after the production
of this player, and certain available features may be subject
to delayed availability;
- not all new and existing disc format versions are supported
by this player;
- new and existing disc formats may be revised, changed,
updated, improved and/or supplemented;
- some discs are produced in a manner that allows specific
or limited operation and feature during playback;
- some features may be optional, additional features may
have been added after the production of this player or
certain available features may be subject to delayed
availability;
- some discs bearing the BD-ROM, BD-RE, BD-R,
DVD-Video, DVD-RW/ DVD-R and CD-RW/CD-R logos
may still be non-standardized discs;
- some discs may not be played depending on their physical
state or recording conditions;
- problems and errors can occur during the creation of Bluray Disc, DVD software and/or the manufacture of discs;
- this player operates differently than a standard DVD player
or other AV equipment; and/or
- for reasons noted throughout this Manual and for other
reason(s) discovered and posted by SAMSUNG customer
care center.
~ If you encounter disc compatibility or player operation
problems, please contact SAMSUNG customer care center.
You may also contact SAMSUNG customer care center for
possible updates on this player.
~ For additional information on playback restrictions and disc
compatibility, refer to the Precautions, Before Reading the
User’s Manual, Disc Types and Characteristics, and Before
Playing sections of this Manual.
English _69
● appendix
COPY PROTECTION
Network Service
All content and services accessible through this device belong to third parties and are protected by copyright, patent,
trademark and/or other intellectual property laws. Such content and services are provided solely for your personal
noncommercial use. You may not use any content or services in a manner that has not been authorized by the content
owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner
or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT CONTENT
OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. SAMSUNG EXPRESSLY
DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS
DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER
IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY
INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY
THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation or warranty
that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control. Without limiting the generality
of this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or suspension of any
content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and services. Any question or
request for service relating to the content or services should be made directly to the respective content and service
providers.
70_ appendix
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered
new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and
workmanship for the following limited warranty period:
One (1) Year Parts / Ninety Days (90) Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States, and
does not include transportation, installation, removal or reinstallation. Warranty repairs must be performed by SAMSUNG’s authorized
service center. To receive warranty service, the original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG’s authorized service center. Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defective
during the limited warranty period specified above. The product must be returned during the warranty period with transportation charges
prepaid to SAMSUNG’s designated service center. Prior to returning any product for warranty service, the purchaser must contact
SAMSUNG for problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the
product.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products
assume the remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this
product and shall not apply to the following, including, but not limited to: damage which occurs in shipment; applications and uses for
which this product was not intended; failures or problems which are caused by products or equipment not supplied by SAMSUNG;
accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations
or surges; damage caused by improper or faulty installation; improper connection with any peripheral; product alteration or modification;
improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow operating
instructions, customer adjustments, maintenance and environmental instructions that are covered and prescribed in the instruction book;
use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment which damage this product or result in service problems;
failures or problems due to incompatibility with other equipment.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner
whatsoever. The time within which an action must be commended to enforce any obligations of SAMSUNG arising under the warranty or
under any statute, or law of the United States or of any state thereof, is hereby limited to ninety (90) days from the date you discovered or
should have discovered the defect. This limitation does not apply to implied warranties arising under state law, if any.
SAMSUNG does not warrant (i) disc compatibility with new and existing format discs or (ii) error free playback in full compliance with
specifications of the compatible disc formats, and SAMSUNG shall not be liable for any data loss recorded in your discs.
SAMSUNG’s responsibility shall be limited to appropriate warranty services during the warranty period through SAMSUNG customer care
center. If you encounter compatibility or data loss problems, please contact SAMSUNG customer care center.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND
NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO
THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS,
FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH
THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL
RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT
SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES
ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT
CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Region
North America
Latin America
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
NICARAGUA
HONDURAS
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
Europe
CIS
Asia Pacific
Middle East &
Africa
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
EIRE
AUSTRIA
SWITZERLAND
RUSSIA
KAZAKHSTAN
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
UKRAINE
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
TURKEY
SOUTH AFRICA
U.A.E
Contact Center 
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG(726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303
01-8000112112
02 201 2418
800-726-786 (800 - SAMSUNG)
70 70 19 70
030-6227 515
3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)
01805 - SAMSUNG(726-7864 € 0,14/Min)
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
02 261 03 710
0900-SAMSUNG (726-7864 € 0,10/Min)
815-56 480
0 801 801 881, 022-607-93-33
80820-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
902-1-SAMSU(72678)
0771-400 200
0845 SAMSUNG (7267864)
0818 717 100
0800-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
8-800-555-55-55
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
8-800-502-0000
8-800-77777
8000-7267
800-7267
1300 362 603
0800 SAMSUNG (0800 726 786)
800-810-5858, 400-810-5858, 010-6475 1880
3698-4698
3030 8282, 1800 110011, 1-800-3000-8282
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
444 77 11
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864), 8000-4726
Web Site
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com/us
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.com/lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ie
www.samsung.com/at
www.samsung.com/ch
www.samsung.ru
www.samsung.com/kz_ru
www.samsung.com/kz_ru
www.samsung.ua
www.samsung.lt
www.samsung.com/lv
www.samsung.ee
www.samsung.com/au
www.samsung.com/nz
www.samsung.com/cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/tr
www.samsung.com/za
www.samsung.com/ae
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
IN THE US
1-800-SAMSUNG
(7267864)
www.samsung.com
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park,
NJ 07660-0511
AK68-01588A

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement