Panasonic CRT Television CT 30WX52 User manual

Panasonic CRT Television CT 30WX52 User manual
SAP
POWER
TV/VIDE
O
T
LIG
E
HT
M
ASPEC
UT
DVD
AUX
DTV
CBL
RC
R
VC
VR
N
A
TV
DB
S
CH
CTIO
VOL
BBE
MENU
EXIT
VOL
CH
RECALL
PAGE
1
2
4
5
7
8
GUIDE
3
6
9
R-TUNE
PROG
0
PIP MIN
REW
PAUSE
FREEZE
TV/VCR
PIP
PLAY
STOP
PIP CH
VCR CH
SPLIT
MOVE
PIP MAX
FF
REC
SEARCH
OPEN/CLOSE
SWAP
Wide Screen TV
Operating Instructions
Model No.
CT-30WX52
CT-34WX52
For assistance, please call : 1-888-VIEW-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com
(U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com
(Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca
English
(Canada)
TQBC0385-1
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with
arrow-head within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.
The exclamation point within
a triangle is intended to tell
the user that important
operating and servicing
instructions are in the papers
with the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel.
2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin
grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258 and 4482866.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
2
Important Safety Instructions
1) Read these instructions.
All the safety and operating instructions should be read before the appliance is operated.
2) Keep these instructions.
The safety and operating instructions should be retained for future reference.
3) Heed all warnings.
All warnings on the appliance and in the operating instructions should be adhered to.
4) Follow all instructions.
All operating and use instructions should be followed.
5) Do not use this apparatus near water.
For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and
the like.
6) Clean only with dry cloth.
Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Slots and Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid
injury from tip-over.
Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination
to overturn.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
This will prevent damage to the product due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION : This TV set is intended to be used with the following TV stand: model TY-S30WX52 for the CT-30WX52,
and TY-S34WX52 for the CT-34WX52. Use with other stands may result in the TV set becoming unstable,
possibly causing injury.
3
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment
from your new color television set.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments,
and retain them for future reference.
Retain your purchase receipt also, and record the model number and serial number of your set in the
space provided on the back cover of these instructions.
Visit our Panasonic Web Site for USA :
for Puerto Rico :
for Canada
:
www.panasonic.com
www.panasonic.com
www.panasonic.ca
For assistance, please call : 1-888-VIEW-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com
(U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com
(Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca
(Canada)
Note:
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these
materials may be regulated in your community due to environmental considerations. For disposal or recycling information
please contact your local authorities, or the Electronics Industries Alliance: <http:// www.eiae.org.>
FCC CAUTION:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this TV not expressly approved by
Matsushita Electric Corporation of America could result in harmful interference and would void the user’s authority to
operate this device.
4
Table of Contents
Important Safety Instructions ....................................... 3
Installation ...................................................................... 6
Receiver Location ......................................................... 6
Optional External Equipment ........................................ 6
AC Power Supply Cord ................................................. 6
Safety Precaution .......................................................... 6
Remote Control Battery Installation ............................. 7
Cable Connection ........................................................... 8
Connecting the Aerial cable to the RF In Terminal ........ 8
Connecting Headphones / Earphones .......................... 9
Optional Equipment Connections ................................. 9
Cable Box Connection .......................................... 9
VCR Connection ................................................. 10
VCR and Cable Box Connection ......................... 12
Digital TV - Set-Top Box (DTV-STB) or DVD Connection .. 14
Amplifier Connection (TO AUDIO AMP) ............... 14
Program Out Connection (PROG OUT) .............. 15
Front Control Panel .............................................. 15
Location of Controls .................................................... 16
Illuminated Remote Control ........................................ 16
Power ON / OFF ............................................................ 18
Connecting the Plug to the Wall Outlet ....................... 18
How to Turn the Power On .......................................... 18
Menu Language Selection .......................................... 18
VHF, UHF and CATV ..................................................... 19
Roller Guide Menu Navigation .....................................20
SET UP Operation ........................................................ 22
SET UP ....................................................................... 22
MENU Languages ....................................................... 22
MODE Selection ......................................................... 23
ANTENNA Selection ................................................... 23
AUTO PROGRAM ....................................................... 24
MANUAL PROGRAM .................................................. 24
AUTO POWER ............................................................ 25
CHAN BANNER .......................................................... 25
Closed Captions ............................................................26
cc ON MUTE ............................................................. 26
cc MODE ................................................................... 27
Geomagnetic correction (Adjusting skewing of images) .. 28
PICTURE Adjustment ................................................... 29
PICTURE MODE ........................................................ 29
COLOR / TINT / BRIGHTNESS / PICTURE /
SHARPNESS / NORMAL ............................... 30
COLOR TEMP (Temperature) / NATURAL COLOR /
VIDEO / NR / 3D Y/C FILTER ......................... 31
COLOR MATRIX ......................................................... 32
VM (Velocity Modulation) ............................................ 32
FREEZE ...................................................................... 33
CHANNEL SCAN .......................................................... 34
CAPTION ....................................................................... 36
PRESET CAPTION ..................................................... 36
MANUAL CAPTION .................................................... 37
INPUT LABEL ............................................................. 37
Selecting STEREO/SAP/MONO ................................... 38
Audio Adjustment ........................................................ 39
Selecting BASS / TREBLE / BALANCE / NORMAL .... 39
AI SOUND / BBE ........................................................ 40
SURROUND ............................................................... 40
SPEAKERS ................................................................. 41
Picture in Picture Operation ........................................ 42
Split Screen ...................................................................44
ASPECT Controls ......................................................... 46
Cable TV ........................................................................ 47
TIMER ............................................................................ 48
CLOCK SET ................................................................ 48
SLEEP ........................................................................ 49
TIMER1 and TIMER2 .................................................. 50
LOCK Feature ............................................................... 52
V-CHIP Menu OPERATION ............................................55
US. TV PROGRAMS ................................................... 56
U.S. MOVIES .............................................................. 58
Canadian English ........................................................ 59
Canadian French ........................................................ 60
Blocking Message ....................................................... 61
Operating peripheral equipment
using the remote control .............................. 62
Programming The Illuminated Remote Control
Using Access Codes ....................................... 62
Programming Without A Code
(When the code is not known) ........................ 63
Infrared Codes Index .................................................. 64
Mode Operational Key Chart ...................................... 67
Troubleshooting Chart ................................................. 69
Cleaning ........................................................................ 70
Specifications ............................................................... 71
5
Installation
Receiver Location
This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options.
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the
screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
To ensure optimum color purity do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,
video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you will need.
AC Power Supply Cord
CAUTION: To prevent electric shock, match wide blade of plug to wide slot of AC outlet and fully insert. Do not use this
(polarized) plug with a receptacle or other outlet unless the blade can be fully inserted to prevent blade exposure.
Safety Precaution
Please take safety precautions to prevent the unit
from falling over.
The unit may fall over during earthquakes, or if
someone stands on or shakes the TV.
Fixing to a wall
Use a strong rope or a chain (not
included) to fasten the TV firmly to a
strong support such as a wall or pillar.
6
Remote Control Battery Installation
Requires two AA batteries.
1. Turn the Transmitter face down.
Remove top cover by pressing
down on marking and sliding cover
off in the direction indicated.
2. Install the batteries as shown in
the battery compartment. (Polarity
+ or – must match the markings in
the compartment).
3.
Replace the cover and slide in
reverse until the lock snaps.
Two AA size
Helpful Hints:
For frequent remote control users, replace old batteries
with alkaline batteries for longer life.
Note: In order to maximize the life of the batteries,
the lighted buttons on the Remote Control can be
turned OFF and ON by pressing R-TUNE and
RECALL at the same time.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.
Helpful Hints:
Whenever you remove the batteries, you may need
to reset the remote control infrared codes. We
recommend that you record the code on page 64, prior
to setting up the remote control.
7
Cable Connection
Connecting the Aerial cable to the RF In Terminal
Antenna Connection
• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is
recommended. Antenna Mode must be set to TV.
• Incoming Cable from Home Antenna
Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the SET UP menu.
( Cable Mode is preset at the factory. Antenna users must change to TV mode and select ANT1 in the Set Up Menu
under Prog chan.)
VHF Aerial UHF Aerial
COMPONENT VIDEO INPUT
Mixer
1
2
INPUT
1
2
3
Y
S-VIDEO
VIDEO
PB
ANT1
75 Ohm
Coaxial Cable
SPLIT
OUT
ANT2
PROG
OUT
PR
VIDEO
L
L
R
R
AUDIO
Incoming Cable from
Home Antenna
TO AUDIO
AMP
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Note: Certain cable systems offset some channels to reduce interference or have
Premium (scrambled) channels. A cable converter box is required for proper
reception. Check with your local Cable company for its compatibility
requirements.
Notes:
(1) To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
(2) If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial
socket and your television receiver.
(3) Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your
particular area and the accessories required.
(4) Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred,
are the responsibility of you, the Customer.
8
Cable Connection
Connecting Headphones / Earphones
Connect headphones / earphones as follows.
INPUT 4
ACTION TV/VIDEO
VOLUME
CHANNEL
HPJ
S-VIDEO VIDEO
L-AUDIO-R
(M3 plug)
(Optional)
You can listen to sound from the headphone Jack.
Optional Equipment Connections
Cable Box Connection
Follow this diagram when connecting your television to a cable box only.
CONNECTIONS ON BACK OF TV
CABLE BOX
Incoming Cable
COMPONENT VIDEO INPUT
1
2
1
INPUT
2
3
Y
S-VIDEO
VIDEO
PB
ANT1
ANT INPUT
SPLIT
OUT
ANT2
ANT OUTPUT
CABLES NOT
SUPPLIED
PROG
OUT
PR
VIDEO
L
L
R
R
AUDIO
TO AUDIO
AMP
Note: The remote control must be programmed with supplied codes to operate the cable box (see page 66).
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3 or Channel 4.
3. Using the cable box, tune to the premium cable channel you would like to view.
Note:
To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu
under Prog Chan (see page 23).
9
Cable Connection
Follow this diagram when connecting your television to a VCR only.
COMPONENT VIDEO INPUT
1
2
1
INPUT
2
3
Y
S-VIDEO
VIDEO
PB
ANT1
SPLIT
OUT
ANT2
PROG
OUT
PR
VIDEO
L
L
R
R
AUDIO
TO AUDIO
AMP
S-VIDEO
ANT INPUT
VIDEO
L
ANT OUTPUT AUDIO
R
Note: The remote control must be programmed with supplied codes to operate the VCR (see page 64, 65).
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you would like to view.
10
Cable Connection
Viewing a video
Procedure
• Option A
1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected
to your VCR.
2. Begin the video.
• Option B
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
• Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
• Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected
to your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the program you would like to view.
11
Cable Connection
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
VCR
Use either the S-Video or the Video connection.
CABLES NOT SUPPLIED
S-VIDEO
VIDEO
CONNECTIONS ON BACK OF TV
L
AUDIO
COMPONENT VIDEO INPUT
R
1
ANT OUTPUT
ANT INPUT
2
1
INPUT
2
3
Y
S-VIDEO
Incoming Cable
VIDEO
PB
ANT1
SPLIT
OUT
ANT2
PROG
OUT
PR
VIDEO
L
L
R
R
AUDIO
TO AUDIO
AMP
CABLE BOX
ANT OUTPUT ANT INPUT
Note: The remote control must be programmed with supplied codes to operate the VCR and cable box
(see page 64-66).
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3 or Channel 4.
3. Using the cable box, tune to the premium cable channel you would like to view.
Note: To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP
menu under Prog Chan (see page 23).
12
Cable Connection
Recording a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected
to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium cable channel you would like to record.
6. Begin recording.
Note: To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a program (except another premium cable channel).
Notes:
(1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals.
Input 4 is located on the front of the unit.
Select the desired VIDEO input position by pressing the TV/VIDEO button. (See page 17)
(2) When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video
input terminal are connected at the same time.
13
Cable Connection
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected to the component video inputs (Y, PB , PR ) of the television.
A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV.
CABLES NOT SUPPLIED
DTV INPUT TERMINALS ON BACK OF TV
COMPONENT VIDEO INPUT
1
DIGITAL TV OUTPUT
2
1
INPUT
2
3
Y
S-VIDEO
MAIN
VIDEO
PB
VIDEO
PR
ANT1
AUDIO OUTPUT
SPLIT
OUT
Y
L
ANT2
R
PB
PROG
OUT
PR
VIDEO
L
L
R
R
AUDIO
TO AUDIO
AMP
Note:
There are 2 sets of three video inputs, Y, PB , and PR . Separate component color inputs provide luminance and color
separation. Use the L (left) and R (right) audio inputs.
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP inputs on back of television.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.
CABLES NOT SUPPLIED
14
Cable Connection
Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections
on the back of the television.
COMPONENT VIDEO INPUT
1
2
1
INPUT
2
3
Y
S-VIDEO
VIDEO
PB
PROG
OUT
ANT1
SPLIT
OUT
ANT2
PR
VIDEO
L
L
R
R
AUDIO
TO AUDIO
AMP
See optional equipment manual for further instructions for recording and monitoring.
INPUT 4
ACTION TV/VIDEO
VOLUME
CHANNEL
HPJ
S-VIDEO VIDEO
L-AUDIO-R
15
Location of Controls
Illuminated Remote Control
Power button
Press to turn the TV ON or OFF (See page 18).
Note: The TV’s power cord must first be plugged into the wall outlet
and then turned on at the POWER switch (standby mode).
ASPECT button
Change of screen size (See page 46).
ZOOM
4:3
FULL
JUST
MUTE button
Press this button to mute the sound, press again to cancel the mute.
Mode Selection buttons
Selects the operation mode for the remote control. (See page 62)
Digital Video Disk Mode Selection for Remote Control
VCR Mode Selection for Remote Control
Aux Mode Selection for Remote Control
DVD
DTV
RC
VR
CBL
Receiver/Amplifier Mode Selection
for Remote Control
DB
Digital Broadcasting Satellite for
Remote Control
Cable TV Mode Selection for Remote Control
TV
TV Mode Selection for Remote Control
AUX
R
VC
S
Digital TV Mode Selection for Remote Control
R-TUNE
R-TUNE button
Switches to previously viewed channel or video mode.
Operation of other Device
PIP MIN
PIP MAX
Buttons
REW
FF
Device
PIP Minimize/Maximize
TV
VCR REW/FF
VCR
16
PLAY
PAUSE
STOP
-
-
-
PLAY
Pause
STOP
CABLE/DBS
-
-
-
-
DVD/LD/CD
Skip Search REW/FF
PLAY
Pause
STOP
RCVR
Surround -/+
-
-
-
Buttons
Device
REC
FREEZE
TV/VCR
TV
VCR
CABLE/DBS
DVD/LD/CD
RCVR
-
PIP CH
VCR CH
PIP or SPLIT FREZE PIP or SPLIT CH up/down
SEARCH
OPEN/CLOSE
PIP Search
VCR RECORD
TV/VCR Switch
VCR CH up/down
-
DBS RECORD
TV/DBS Switch
TV/DBS CH up/down
-
-
-
-
OPEN/CLOSE
-
-
-
-
Location of Controls
TV/VIDEO button
The input mode changes each time this button is pressed.
TV
COMPONENT 1
VIDEO 4
COMPONENT 2
VIDEO 3
VIDEO 2
VIDEO 1
SAP button
Selects Audio mode (See page 38).
STEREO
SAP
Turning the remote control illumination
ON and OFF .
MONO
R-TUNE
Lights the remote control buttons.
The selected button blinks when lit.
SAP
POWER
TV/VIDEO
RECALL
LIG
H
E
UT
T
DVD
AUX
DTV
CBL
RC
R
VC
VR
Changes to the next channel up
Moves cursor upward during menu mode.
DB
VOL
EXIT
VOL
RECALL
PAGE
GUIDE
1
2
3
4
5
6
7
8
9
R-TUNE
PROG
Displays menu
Press to access
DTV, DBS or DVD
menus.
During TV mode press
to select BBE ON or
BBE OFF.
BBE
MENU
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
Page up/down for DBS,
skip +/- for DVD & CD.
MOVE
CH
RECALL
Press to display
time, channel,
sleep timer and
other options.
EXIT
PAGE
GUIDE
GUIDE button
for DBS.
Returns to normal viewing from the MENU screen.
Previous item in MENU.
Direct program number
selection buttons
SEARCH
OPEN/CLOSE
PROG
SPLIT
VOL
Changes to the next channel down
Moves cursor downward during menu mode.
0
PIP
CH
CTIO
VOL
CH
Increases volume
Moves cursor to
the right during
menu mode.
N
BBE
MENU
Reduces volume
Moves cursor to the
left during menu
mode.
N
A
S
CH
CTIO
A
TV
M
T
ASPEC
Remote control illumination
can be turned ON and OFF
by pressing the RECALL
button while pressing the
R-TUNE button.
SWAP
PROG dash button
Program dash channel numbers for DTV and DBS.
Swap pictures in Split Screen and Picture in Picture operation
(See page 42, 45).
Move PIP frame in Picture in Picture Operation (See page 43).
Split Screen (see page 44)
Picture in Picture Operation (see page 42)
17
Power ON / OFF
Connecting the Plug to the Wall Outlet
Note:
Main plug types vary between countries. The power plug
shown at left may, therefore, not be the type fitted to
your set.
How to Turn the Power On
Press the POWER switch on the TV to turn the set on.
POWER-ON: Red
When the set is on press the POWER switch on the TV
to turn the set off.
STANDBY: No light
Example: The screen below is displayed for a while after
the TV is turned on. (setting condition is an
example.)
CH 3
Remote Control Sensor
JUST
SAP
SAP
POWER
VIVID
LIG
H
E
UT
T
M
T
ASPEC
TV/VIDEO
DVD
AUX
DTV
CBL
RC
R
VC
S
CH
CTIO
VOL
BBE
MENU
POWER
Press the POWER button on the remote control to turn
the TV on: Red
Press the POWER button on the remote control to turn
the TV off: No light (standby)
N
A
TV
DB
VR
VOL
CH
RECALL
Note:
The TV will still consume some power as long as the power cord is still inserted
into the wall outlet.
Menu Language Selection
In SET UP Menu, Select IDIOMA/LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French). (refer to page 22)
18
VHF, UHF and CATV
INPUT 4
ACTION TV/VIDEO
VOLUME
CHANNEL
HPJ
S-VIDEO VIDEO
L-AUDIO-R
INPUT 4
ACTION TV/VIDEO
VOLUME
CHANNEL
HPJ
S-VIDEO VIDEO
L-AUDIO-R
Operation can be done from the TV set.
Channel selectors
Volume adjusters
Power switch
•
•
Remote control sensor
SAP
POWER
TV/VIDEO
LIG
H
E
UT
RC
VR
1
Press
TV
AUX
DVD
R
VC
to operate the TV set with the remote
control.
CBL
DTV
TV
T
DB
TV
S
CH
CTIO
VOL
EXIT
VOL
Press to turn the TV on (See page 18).
POWER
CH
RECALL
PAGE
GUIDE
2
3
4
5
6
7
8
9
Press to select the desired channel.
CH
CTIO
N
1
3
A
BBE
MENU
2
N
A
VOL
VOL
CH
R-TUNE
PROG
0
PLAY
PIP MAX
FF
PAUSE
STOP
REC
4
Select the desired volume level.
CH
CTIO
N
PIP MIN
REW
A
M
T
ASPEC
VOL
FREEZE
TV/VCR
PIP
PIP CH
VCR CH
SPLIT
MOVE
SEARCH
OPEN/CLOSE
VOL
CH
SWAP
Notes:
(1) The channel number and volume level remain the same even after
the TV is turned off.
(2) Power consumption and howling of sound can be reduced if the
volume level is lowered.
19
Roller Guide Menu Navigation
Press to display the roller guide menu.
CH
CTIO
N
A
1
VOL
VOL
CH
EXIT
SET UP
Press to rotate to desired icon.
Press to display the main menu and
submenu field.
CH
CTIO
N
A
2
VOL
VOL
SET UP
ENGLISH
MODE
IDIOMA /
LANGUE
PROG CHAN
CH
CC
OTHER ADJ.
SET UP
IDIOMA /
LANGUE
Press to select main menu feature.
PROG CHAN
ON MUTE
MODE
CC
CC
CC
OTHER ADJ.
Main menu field
Submenu field
CH
CTIO
N
A
3
NO
OFF
VOL
SET UP
VOL
Press to enter submenu field.
CH
IDIOMA /
LANGUE
PROG CHAN
CC
CC
Press to select desired submenu feature.
CC
OTHER ADJ.
ON MUTE
MODE
NO
OFF
SET UP
IDIOMA /
LANGUE
PROG CHAN
CC
CC
CC
OTHER ADJ.
4
ON MUTE
MODE
SET UP
CH
CTIO
IDIOMA /
LANGUE
N
A
Press to select or adjust.
VOL
VOL
PROG CHAN
CH
CC
CC
CC
OTHER ADJ.
ON MUTE
MODE
Press twice to return to the roller guide.
CH
CTIO
N
A
5
VOL
VOL
EXIT
SET UP
CH
Press to exit roller guide.
This returns the set to the normal viewing.
NORMAL PICTURE
20
NO
OFF
NO
C1
Roller Guide Menu Navigation
SET UP
SET UP
ENGLISH
MODE
IDIOMA /
LANGUE
IDIOMA /
LANGUE
PROG CHAN
PROG CHAN
CC
CC
OTHER ADJ.
SET UP
ANT1
ANTENNA
OTHER ADJ.
SET UP
IDIOMA /
LANGUE
PROG CHAN
CC
CC
CC
OTHER ADJ.
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
ON MUTE
MODE
PIC MODE STANDARD
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NO
NORMAL
NO
OFF
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
COLOR TEMP NORMAL
NATURAL COLOR ON
OFF
VIDEO NR
ON
3D Y / C FILTER
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
SD
COLOR MATRIX
ON
VM
SPLIT
FREEZE
LOCK
MODE
HOW LONG ?
LOCK
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
CHANGE CODE
TIMER
TIMER
CLOCK SET
SLEEP
TIMER1
TIMER2
TIMER
TIME
DAY
12 : 00 AM
SUN
CLOCK SET
SLEEP
TIMER1
TIMER2
TIMER
HOW LONG ?
30
CLOCK SET
SLEEP
TIMER1
TIMER2
DAYLY
DAY
12 : 00 PM
ON TIME
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
21
SET UP Operation
SET UP
Press to display the roller guide menu.
CH
CTIO
N
A
1
VOL
VOL
CH
EXIT
SET UP
Press to rotate to SET UP.
Press to display SET UP.
CH
CTIO
SET UP
N
A
2
VOL
VOL
MODE
IDIOMA /
LANGUE
CH
ENGLISH
PROG CHAN
CC
Press to select the main menu.
OTHER ADJ.
Proceed to each adjustment item of the
selected main menu.
3
To end Adjustment:
EXIT
N
A
Press twice to return to the roller guide.
CH
CTIO
VOL
SET UP
VOL
CH
Press to exit roller guide.
This returns the set to normal viewing.
NORMAL PICTURE
MENU Languages
In SET UP Menu, select IDIOMA / LANGUE to change menu language to
ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French).
SET UP
Press to select IDIOMA / LANGUE.
CH
CTIO
PROG CHAN
N
A
1
VOL
VOL
Press to enter submenu field.
CH
CH
CTIO
VOL
VOL
CH
22
Press to select ENGLISH, SPANISH or FRENCH.
N
A
2
IDIOMA /
LANGUE
ENGLISH
CC
OTHER ADJ.
MODE
ENGLISH
SET UP Operation
MODE Selection
To select either CABLE or TV.
In SET UP menu press to select PROG CHAN.
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
SET UP
CH
IDIOMA /
LANGUE
PROG CHAN
2
CH
CTIO
CC
OTHER ADJ.
Press to select CABLE or TV.
N
A
Press to select MODE.
CABLE
MODE
ANT1
ANTENNA
AUTO PROGRAM
MANUAL PROGRAM
VOL
VOL
CABLE
TV
CH
ANTENNA Selection
To select either ANT1 or ANT2.
In SET UP menu press to select PROG CHAN.
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
CH
SET UP
IDIOMA /
LANGUE
PROG CHAN
2
Press to select ANTENNA.
CC
CH
CTIO
Press to select ANT1 or ANT2.
N
A
OTHER ADJ.
CABLE
MODE
ANT1
ANTENNA
AUTO PROGRAM
MANUAL PROGRAM
VOL
VOL
ANT1
ANT2
CH
23
SET UP Operation
AUTO PROGRAM
To automatically program all channels with a signal.
In SET UP menu press to select PROG CHAN.
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
SET UP
CH
IDIOMA /
LANGUE
Press to select AUTO PROGRAM.
2
PROG CHAN
OTHER ADJ.
N
A
CC
CH
CTIO
VOL
VOL
CABLE
MODE
ANT1
ANTENNA
AUTO PROGRAM
MANUAL PROGRAM
Press to start AUTO PROGRAM.
CH
MANUAL PROGRAM
To manually add or delete channels.
In SET UP menu press to select PROG CHAN.
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
SET UP
CH
IDIOMA /
LANGUE
PROG CHAN
Press to select MANUAL PROGRAM.
CC
OTHER ADJ.
CH
CTIO
N
A
2
CABLE
MODE
ANT1
ANTENNA
AUTO PROGRAM
MANUAL PROGRAM
VOL
VOL
Press to display next menu.
CH
3
1
2
3
4
5
6
7
8
9
Use remote numeric keypad to select
desired channel.
MANUAL PROGRAM
ENTER CHANNEL
0
TO ADD
Press to ADD or DELETE the channel.
CH
CTIO
N
A
4
VOL
VOL
CH
24
TO DELETE
3
SET UP Operation
AUTO POWER
Select SET to power up the TV at the same time as the cable box or other components or select OFF.
In SET UP menu press to select OTHER ADJ.
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
SET UP
CH
IDIOMA /
LANGUE
PROG CHAN
Press to select AUTO POWER.
2
CC
Press to select SET or OFF.
N
A
OTHER ADJ.
CH
CTIO
AUTO POWER ON OFF
OFF
CHAN BANNER
GEOMAGNETIC CORR
VOL
VOL
SET
OFF
CH
CHAN BANNER
Select ON to display the CHANNEL BANNER on the screen or select OFF.
1
CH
CTIO
N
A
In SET UP menu press to select OTHER ADJ.
VOL
VOL
Press to enter submenu field.
SET UP
CH
IDIOMA /
LANGUE
PROG CHAN
2
CH
CTIO
VOL
CC
OTHER ADJ.
AUTO POWER ON OFF
OFF
CHAN BANNER
GEOMAGNETIC CORR
Press to select ON or OFF.
N
A
Press to select CHAN BANNER.
VOL
CH
ON
OFF
25
Closed Captions
This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form
of written words across the screen (white or colored letters on a black background). It allows the viewer to read the
dialogue of a television program or other information.
Press to display the roller guide menu.
CH
CTIO
N
A
1
VOL
VOL
EXIT
CH
SET UP
Press to rotate to SET UP.
Press to display SET UP.
CH
CTIO
SET UP
IDIOMA /
LANGUE
N
A
2
VOL
VOL
PROG CHAN
CH
CC
CC
CC
OTHER ADJ.
Press to select cc .
VOL
NO
OFF
ON MUTE
MODE
NO
OFF
SET UP
CH
CTIO
IDIOMA /
LANGUE
N
A
3
ON MUTE
MODE
VOL
Press to enter submenu field.
PROG CHAN
CH
CC
CC
CC
OTHER ADJ.
cc ON MUTE
Activates the On-Screen Closed Caption feature, when the MUTE button on the Remote Control is pressed. To
deactivate, press the MUTE button again.
Note:
This feature functions when the Closed Caption Mode is in the “OFF” position. The program being viewed must be
broadcast with Closed Caption.
CH
CTIO
Press to select from the following:
SET UP
N
A
In the submenu field press to select cc ON MUTE.
VOL
VOL
NO (OFF)
CH
C1
C2
C3
C4
IDIOMA /
LANGUE
PROG CHAN
CC
CC
CC
OTHER ADJ.
26
ON MUTE
MODE
NO
OFF
Closed Captions
cc MODE
Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in
this menu.
CH
CTIO
Press to select from the following:
N
A
In the submenu field press to select cc MODE.
VOL
SET UP
VOL
OFF
C1
C2
T1
IDIOMA /
LANGUE
T2
CH
T4
T3
C4
PROG CHAN
C3
CC
CC
CC
OTHER ADJ.
ON MUTE
MODE
NO
OFF
• CAPTION OFF - Recommended mode when Closed Caption is not being used.
• CAPTION C1 - For video related information that can be displayed (up to 4 lines of script strategically placed
on the television screen so that it does not obstruct relevant parts of the picture).
• CAPTION C2 - Another mode used for video related information.
• TEXT T1 Blanks out a large portion of the picture on the television screen, and displays program guide or
any other information currently being transmitted.
• TEXT T2 Another mode which displays information and blanks out a large portion of the picture on the
television screen.
• CAPTION C3 - Another mode used for video related information.
• CAPTION C4 - Another mode used for video related information.
• TEXT T3 Another mode which displays information and blanks out a large portion of the picture on the
television screen.
Another mode which displays information and blanks out a large portion of the picture on the
• TEXT T4 television screen.
Notes:
(1) Recommended menu Set Up for Closed Caption when using Mute Button.
cc ON MUTE: C1
cc MODE:
OFF
(2) The setting for CC ON MUTE is valid only when the CC MODE is OFF. CC MODE set to ON will override CC ON MUTE.
This menu cannot be selected when the MAIN picture is displaying a COMPONENT VIDEO INPUT of 480i or more.
(3) When aspect is ZOOM, Closed Caption cannot be used.
To end Adjustment:
Press twice to return to the roller guide.
CH
CTIO
EXIT
SET UP
N
A
4
VOL
VOL
CH
Press to exit roller guide.
This returns the set to normal viewing.
NORMAL PICTURE
27
Geomagnetic correction (Adjusting skewing of images)
GEOMAGNETIC CORR (CORRECTION) adjusts to erase the discoloration of the picture due to earth’s magnetic field in
the area.
This correction is made when moving the TV set or when image is slightly skewed.
Press to display the roller guide menu.
CH
CTIO
N
A
1
VOL
VOL
CH
EXIT
SET UP
Press to rotate to SET UP.
Press to display SET UP.
CH
CTIO
SET UP
N
A
2
VOL
VOL
IDIOMA /
LANGUE
CH
PROG CHAN
CC
Press to select OTHER ADJ.
OTHER ADJ.
OFF
OFF
CHAN BANNER
GEOMAGNETIC CORR
AUTO POWER ON
SET UP
IDIOMA /
LANGUE
CH
CTIO
N
A
3
VOL
VOL
PROG CHAN
Press to enter submenu field.
CC
OTHER ADJ.
CH
OFF
OFF
CHAN BANNER
GEOMAGNETIC CORR
AUTO POWER ON
Press to select GEOMAGNETIC CORR.
GEOMAGNETIC CORRECTION
Adjust the vertical bar left or right until the
discoloration disappears.
0
CH
CTIO
TO ADJUST
PRESS ACTION TO EXIT
N
A
4
VOL
VOL
CH
Press to exit GEOMAGNETIC CORRECTION.
“DEGAUSSING” will be displayed for three seconds.
5
DEGAUSSING
To end Adjustment:
N
A
Press twice to return to the roller guide.
CH
CTIO
EXIT
VOL
VOL
SET UP
CH
Press to exit roller guide.
This returns the set to normal viewing.
NORMAL PICTURE
28
PICTURE Adjustment
1
Press to display the roller guide menu.
A
N
CH
CTIO
VOL
SET UP
VOL
CH
EXIT
Press to rotate to PICTURE.
2
Press to display PICTURE menu.
A
N
CH
CTIO
VOL
VOL
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
CH
Press to select the main menu.
VIDEO ADJ.
OTHER ADJ1.
OTHER ADJ2.
PIC MODE STANDARD
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NO
NORMAL
Proceed to each adjustment item of the selected main menu.
To end Adjustment:
SET UP
Press twice to return to the roller guide.
CH
CTIO
EXIT
N
A
3
VOL
VOL
CH
Press to exit roller guide.
This returns the set to normal viewing.
NORMAL PICTURE
PICTURE MODE
In PICTURE menu press to select VIDEO ADJ..
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
CH
In VIDEO ADJ. submenu field press to select PIC
MODE.
Press to select your desired PICTURE MODE.
CH
CTIO
N
A
2
VOL
PIC MODE STANDARD
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NO
NORMAL
VOL
VIVID
STANDARD
CINEMA
CH
29
PICTURE Adjustment
COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL
In PICTURE menu press to select VIDEO ADJ..
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
CH
In VIDEO ADJ. submenu field press to select each
submenu (COLOR / TINT / BRIGHTNESS /
PICTURE / SHARPNESS / NORMAL).
CH
CTIO
N
A
2
VOL
VOL
CH
Press to adjust the desired level by looking at the
picture behind the menu.
Item
30
Function
COLOR
Adjusts desired color intensity.
TINT
Adjusts natural flesh tones.
BRIGHTNESS
Adjusts dark areas of picture.
PICTURE
Adjusts white areas of picture.
SHARPNESS
Adjusts clarity of outline detail.
NORMAL
Resets all picture adjustments to factory default settings.
PIC MODE STANDARD
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NO
NORMAL
PICTURE Adjustment
COLOR TEMP (Temperature) / NATURAL COLOR / VIDEO / NR / 3D Y/C FILTER
In PICTURE menu press to select OTHER ADJ1.
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
CH
In OTHER ADJ1 submenu field press to select
each submenu (COLOR TEMP / NATURAL
COLOR / VIDEO NR / 3D Y/C FILTER).
2
CH
CTIO
N
A
COLOR TEMP NORMAL
NATURAL COLOR ON
OFF
VIDEO NR
ON
3D Y / C FILTER
VOL
VOL
CH
Press to adjust the desired level by looking at the
picture behind the menu.
Item
COLOR TEMP
(temperature)
Mode
NORMAL
Explanations
WARM
COOL
To increase or decrease WARM (red) and COOL
(blue) colors to suit personal preferences.
NATURAL COLOR
ON
OFF
To increase the color reproduction range with
natural color gradation and highly delicate hues.
VIDEO NR
ON
OFF
Reduces noise in the channel,commonly called
snow. Remains off when receiving a strong signal.
3D Y/C FILTER
ON
OFF
Minimizes noise and cross color in the picture.
31
PICTURE Adjustment
VM
FREEZE
VM (Velocity Modulation)
Select ON to emphasize the edge of an image, or select OFF.
In PICTURE menu press to select OTHER ADJ2.
CH
CTIO
N
A
1
VOL
VOL
Press to enter submenu field.
CH
In OTHER ADJ2 submenu field press to select VM.
CH
CTIO
VOL
VOL
CH
32
Press to select ON or OFF.
N
A
2
ON
OFF
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
SD
COLOR MATRIX
ON
VM
SPLIT
FREEZE
PICTURE Adjustment
FREEZE
Select SPLIT or PIP to determine the frozen picture frame during single screen.
In PICTURE menu press to select OTHER ADJ2.
CH
CTIO
N
A
1
VOL
Press to enter submenu field.
VOL
VIDEO ADJ.
OTHER ADJ1
OTHER ADJ2
CH
In OTHER ADJ2 submenu field press to select
FREEZE.
Press to select SPLIT or PIP.
CH
CTIO
N
A
2
VOL
SD
COLOR MATRIX
ON
VM
SPLIT
FREEZE
VOL
SPLIT
PIP
CH
3
FREEZE
TV/VCR
FREEZE
When the screen is single press TV/VCR to freeze the screen.
FREEZE
FREEZE
When FREEZE SPLIT is selected.
4
FREEZE
TV/VCR
When FREEZE PIP is selected.
FREEZE
Press TV/VCR again to recover.
Notes: FREEZE
(1) When TV/VCR is pressed during Split Screen, the Split Screen will be frozen and the main picture continues action (see page 44).
Main Picture
Split Screen
(FREEZE)
FREEZE
(2) When TV/VCR is pressed during PIP Operation, the PIP frame will be frozen and the main picture continues action (see page 43).
Main Picture
PIP frame
(FREEZE)
33
CHANNEL SCAN
CHANNEL SCAN
Let you select the channel scanning mode either FAV or ALL.
CHANNEL SCAN FAV
CHANNEL SCAN ALL
Press to display the roller guide menu.
CH
CTIO
N
A
1
To enter up to 16 favorite channels.
To scan all channels when using the CH up/down buttons.
VOL
VOL
CH
EXIT
Press to rotate to CHANNELS.
Press to display CHANNELS.
CH
CTIO
N
A
2
LOCK
VOL
VOL
FAVORITES
CAPTION
CH
Press to select FAVORITES.
CH
CTIO
N
A
3
VOL
VOL
Press to enter submenu field.
CH
Press to select CHANNEL SCAN.
Press to select FAV or ALL.
FAV
CH
CTIO
N
A
4
VOL
VOL
CH
34
CHANNEL SCAN FAV
ENTER CHANNEL
15
FAVORITE CHANNELS
2 5 8 10
15 18 25
ALL
FAVORITES
CAPTION
CHANNEL SCAN FAV
15
ENTER CHANNEL
FAVORITE CHANNELS
2 5 8 10
15 18 25
FAVORITES
CAPTION
FAVORITES
CAPTION
CHANNEL SCAN FAV
15
ENTER CHANNEL
FAVORITE CHANNELS
2 5 8 10
15 18 25
FAV
CHANNEL SCAN
ENTER CHANNEL 15
FAVORITE CHANNELS
2 5 8 10
18 25
TO ADD
TO DELETE
FAVORITES
CAPTION
CHANNEL SCAN
ENTER CHANNEL
15
FAVORITE CHANNELS
2 5 8 10
15 18 25
TO ADD
TO DELETE
35
CH
CTIO
VOL
PRESET CAPTION
MANUAL CAPTION
INPUT LABEL
EXIT
N
A
FAVORITES
CAPTION
VOL
LOCK
CH
FAVORITES
CAPTION
PRESET CAPTION
MANUAL CAPTION
INPUT LABEL
PRESET CAPTION
FAMILY
CRTOON
FLIX
CSPAN
FNC
DISC
FOXSPT
DISNEY
FOOD
E!
FX
ENCORE
GOLF
ESPN2
HBO2
ESPNWS
PRESS
36
FOR MORE CHANNELS
CAPTION
MANUAL CAPTION
1
Enter channel numbers and captions manually.
A
N
CH
CTIO
VOL
Under MANUAL CAPTION press to display next
menu.
VOL
CH
2
FAVORITES
CAPTION
PRESET CAPTION
MANUAL CAPTION
INPUT LABEL
Press to enter desired channel.
3
____
ENTER CHANNEL
N
A
MANUAL CAPTION
CH
CTIO
VOL
ENTER CAPTION
VOL
TO MOVE CURSOR
OR
CH
1
2
3
4
5
6
7
8
9
TO SELECT CHANNEL
Use remote numeric keypad to select desired
channel (refer to your local TV guide).
0
3
MANUAL CAPTION
CH
CTIO
ENTER CHANNEL
N
A
Press to select ENTER CAPTION.
VOL
ENTER CAPTION
VOL
3
____
TO MOVE CURSOR
CH
TO SELECT CHARACTER
4
Press to select characters.
MANUAL CAPTION
A
N
CH
CTIO
VOL
ENTER CHANNEL
3
ENTER CAPTION
: / 5A
TO MOVE CURSOR
VOL
TO SELECT CHARACTER
CH
Press to move cursor.
Repeat Step 4 up to 4 characters.
Note:
In MANUAL CAPTION up to 4 characters can be selected as a CAPTION.
INPUT LABEL
CH
CTIO
Under INPUT LABEL press to display next menu.
N
A
1
Label video input connections to display optional equipment.
VOL
VOL
FAVORITES
CAPTION
CH
PRESET CAPTION
MANUAL CAPTION
INPUT LABEL
Press to move cursor.
2
N
A
INPUT LABEL
CH
CTIO
VOL
VOL
CH
Press to select desired LABEL.
Note:
To delete, select LABEL, then press
VOL or VOL
to select ‘‘SKIP’’. The selected INPUT mode will be
skipped when TV/VIDEO button is pressed.
COMPONENT1
COMPONENT2
VIDEO1
VIDEO2
VIDEO3
VIDEO4
DTV STB
TO MOVE CURSOR
TO SELECT LABEL
37
Selecting STEREO/SAP/MONO
Press to display the roller guide menu.
CH
CTIO
N
A
1
VOL
TIMER
VOL
CH
EXIT
Press to rotate to AUDIO.
Press to display AUDIO.
CH
CTIO
MODE
N
A
2
SET UP
VOL
VOL
BASS
TREBLE
BALANCE
CH
Press to select AUDIO ADJ..
3
Press to enter submenu field.
Press to select MODE.
Press to select STEREO / SAP / MONO.
Red display - Signal available
White display - Signal not available
CH
CTIO
N
A
4
VOL
MODE
AUDIO ADJ.
OTHER ADJ.
SURROUND
SPEAKERS
VOL
CH
To end Adjustment:
Press twice to return to roller guide.
CH
CTIO
N
A
5
MONO
BASS
TREBLE
BALANCE
NORMAL
VOL
TIMER
VOL
EXIT
CH
SET UP
Press to exit roller guide.
This returns the set to normal viewing.
Helpful Hints:
•
•
•
38
STEREO - Two channel Audio reception.
SAP - Second Audio Programming (typically used
for bilingual audio).
MONO - Use when stereo signal is weak.
NORMAL PICTURE
NO
Audio Adjustment
1
Press to display the roller guide menu.
A
N
CH
CTIO
VOL
TIMER
VOL
CH
EXIT
Press to rotate to AUDIO.
Press to display AUDIO menu.
CH
CTIO
N
A
2
SET UP
VOL
VOL
CH
Press to select the main menu.
AUDIO ADJ.
OTHER ADJ.
SPEAKERS
SURROUND
AUDIO ADJ.
OTHER ADJ.
SURROUND
SPEAKERS
MODE
STEREO SAP MONO
BASS
TREBLE
BALANCE
NO
NORMAL
Proceed to each adjustment item of the
selected main menu.
Selecting BASS / TREBLE / BALANCE / NORMAL
In AUDIO menu press to select AUDIO ADJ..
CH
CTIO
MODE
N
A
1
VOL
VOL
Press to enter submenu field.
CH
AUDIO ADJ.
OTHER ADJ.
SURROUND
SPEAKERS
MONO
BASS
TREBLE
BALANCE
NORMAL
NO
Press to select BASS / TREBLE / BALANCE / NORMAL.
CH
CTIO
Press to adjust the desired level by listening to the sound.
N
A
2
VOL
VOL
CH
Item
BASS
TREBLE
BALANCE
NORMAL
Effect
Less
More
Less
More
Left SP.
Right SP.
NO
Function
Increase or decrease the bass response.
Increase or decrease the treble response.
Emphasize the left / right speaker volume.
Reset BASS, TREBLE and BALANCE adjustments to factory default settings.
39
Audio Adjustment
AI SOUND / BBE
AI SOUND
BBE
Equalize overall volume levels across all channels.(AI sound is not available in VIDEO mode).
Use special signal processing to accurately reproduce the "attack" of each sound, in order to make it
immediate and superbly faithful to the original, while retaining its natural feel.
In AUDIO menu press to select OTHER ADJ..
CH
CTIO
N
A
1
VOL
AUDIO ADJ.
OTHER ADJ.
SURROUND
SPEAKERS
VOL
Press to enter submenu field.
VOL
Press to select AI SOUND or BBE.
AI SOUND
BBE
Press to select ON or OFF.
ON
OFF
CH
CH
CTIO
N
A
2
VOL
CH
AUDIO ADJ.
OTHER ADJ.
SURROUND
SPEAKERS
AI SOUND
BBE
ON
ON
AI SOUND
BBE
ON
ON
MODE
ON
Note:
All SOUND is not available in VIDEO mode.
SURROUND
To enjoy a concert hall effect, turn the SURROUND to ON.
1
CH
CTIO
N
A
In AUDIO menu press to select SURROUND.
VOL
VOL
Press to enter submenu field (MODE).
CH
Press to select ON or OFF.
CH
CTIO
ON
OFF
N
A
2
VOL
VOL
CH
Notes:
During stereo sound or soft playing : SURROUND
During normal sound :
SURROUND
40
set to ON.
set to OFF.
AUDIO ADJ.
OTHER ADJ.
SURROUND
SPEAKERS
Audio Adjustment
SPEAKERS
In AUDIO menu under SPEAKERS, select the desired SPEAKER mode.
In AUDIO menu press to select SPEAKERS.
1
A
N
CH
CTIO
VOL
AUDIO ADJ.
OTHER ADJ.
SURROUND
SPEAKERS
Press to enter submenu field.
VOL
CH
ON
Press to select your desired mode.
CH
CTIO
N
A
2
VOL
ON
VOL
OFF & VARIABLE AUDIO OUT
OFF & FIXED AUDIO OUT
CH
Function
Mode
ON
TV speakers operate normally.
OFF & Variable Audio Out
TV speakers off -audio adjustable by television.
OFF & Fixed Audio Out
TV speakers off -audio adjustable by the external amplifier only.
Press twice to return to the roller guide.
CH
CTIO
N
A
To end Adjustment:
TIMER
VOL
VOL
EXIT
CH
SET UP
Press to exit roller guide.
This returns the set to normal viewing.
NORMAL PICTURE
41
Picture in Picture Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the
same time with or without an external video source such as a VCR, cable box, etc.
Basic PIP Operation
PIP
1
Press the PIP button on the remote control to display the PIP
Frame on screen.
Note:
Audio is from Main Picture
only.
SAP
POWER
TV/VIDEO
LIG
H
E
UT
T
M
T
ASPEC
DVD
AUX
DTV
CBL
RC
R
VR
VC
TV
DB
VOL
PIP CH
VCR CH
.
RECALL
PAGE
GUIDE
1
2
3
4
5
6
7
8
R-TUNE
Press to select channel for the Main Picture.
or
Use the remote control numeric keypad.
3
CH
CH
CTIO
N
EXIT
Select channels for the PIP frame by pressing
VOL
A
BBE
MENU
PIP CH
VCR CH
2
N
A
S
CH
CTIO
VOL
VOL
CH
Main Picture
1
2
3
9
4
5
6
PROG
7
8
9
0
0
Picture-in-Picture Frame
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
PIP
SPLIT
MOVE
SEARCH
OPEN/CLOSE
4
RECALL
5
PIP
Press to view picture source status.
Press
PIP
again to cancel the PIP Frame.
SWAP
SWAP
SWAP
Press
SWAP
to switch the PIP and MAIN PICTURE source.
A
42
A
B
B
B
A
Picture in Picture Operation
PIP MIN, PIP MAX
PIP MIN
REW
PIP MAX
FF
These features are used to size PIP Frame.
Press
PIP MIN
REW
or
PIP MAX
FF
MAX
to size the PIP Frame.
Minimum
Freeze
FREEZE
TV/VCR
Main Picture
During PIP operation this feature is used to stop action in PIP frame.
FREEZE
1
Press TV/VCR to stop PIP frame action.
2
Press TV/VCR again to continue action.
FREEZE
Note:
To stop action for Main picture:
1 In PICTURE MENU OTHER ADJ2, select FREEZE
PIP or SPLIT (see p33).
FREEZE
FREEZE
2 Press TV/VCR while PIP frame is not displayed.
TV/VIDEO Button
Main Picture
TV/VIDEO
Press when PIP frame is displayed to select desired input mode.
PIP CH #
PIP COMPONENT 1
PIP VIDEO 4
Main Picture
PIP COMPONENT 2
PIP VIDEO 3
PIP VIDEO 1
PIP VIDEO 2
Picture-in-Picture Frame
Search
SEARCH
OPEN/CLOSE
This feature lets you scan through all available channels.
1
Press
2
Press
SEARCH
OPEN/CLOSE
SEARCH
OPEN/CLOSE
Search Frames
to display search frames.
again to stop search feature. This returns
the screen to the previous condition (single screen, PIP
Main Picture
screen or SPLIT screen).
Move
MOVE
This feature is used to move PIP frame to one of four corners.
Press
MOVE
to position PIP frame to desired corner.
PIP Frames
Main Picture
43
Split Screen
This feature lets you watch two different channels side by side with or without an external video source.
The audio is from the Main picture only (left side).
Split screen enables you to search other channels on the right screen or check video recording status.
Splitting the screen
1
SAP
POWER
TV/VIDEO
to display Split screen.
LIG
H
E
UT
T
M
T
ASPEC
SPLIT
Press
DVD
AUX
DTV
CBL
RC
R
VC
VR
Main Picture
Split Screen
CH
CTIO
N
A
TV
DB
S
VOL
BBE
MENU
EXIT
(The previously selected screen appears.)
VOL
2
CH
RECALL
PAGE
Press
SPLIT
again to return.
GUIDE
1
2
3
4
5
6
7
8
9
R-TUNE
Returning to one screen.
Freezing pictures
During Split Screen this feature is used to stop action in SPLIT screen.
PROG
0
1
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
PIP
Main Picture
SPLIT
MOVE
FREEZE
TV/VCR
FREEZE
Press TV/VCR to stop action in SPLIT screen.
FREEZE
SEARCH
OPEN/CLOSE
SWAP
2
FREEZE
Press TV/VCR again to recover.
Note:
To stop action for Main picture:
1 In PICTURE MENU OTHER ADJ2, select FREEZE
PIP or SPLIT (see p33).
FREEZE
2 Press TV/VCR while SPLIT frame is not displayed.
Notes:
(1) Sound from the left screen is output from the speakers on the TV set (and earphone jacks).
(2) When the screen is split, signals of the left screen are output from the rear monitor output terminal.
(3) The left and right screen are processed by individual circuits, and therefore, may have slight variation in sound and
image quality.
(4) Split screen returns to single screen when the TV is turned off.
(5) The right and left screens cannot display the same picture at the same time.
(6) Use the right screen when playing video games on a split screen (to avoid distortion of images).
44
Split Screen
Changing the channels for the Split Screen
PIP CH
VCR CH
Select channels for the Split Screen by
PIP CH
VCR CH
pressing
CH
SWAP
Press
SWAP
to switch the SPLIT SCREEN and
MAIN PICTURE source.
.
CH10
CH10
CH5
CH10
CH5
CH10
Changing the channels for the Main Picture
CH
Swapping left and right screens
1
2
3
4
5
6
7
8
9
Viewing Videos
TV/VIDEO
While Split screen is displayed, press
switch modes.
TV/VIDEO
to
0
Select channels for the Main Picture by pressing CH
VIDEO 1
CH10
CH
or use the remote control numeric keypad.
CH10
Searching the other channels
SEARCH
OPEN/CLOSE
press
CH5
SEARCH
OPEN/CLOSE
to search the other channels.
CH10
Search Frames
Press
SEARCH
OPEN/CLOSE
again to stop the search.
This returns the screen to its previous condition.
45
ASPECT Controls
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
ASPECT button
The aspect mode changes each time the ASPECT button is pressed.
CTIO
N
A
Notes:
(1) For a 480p signal input during component input signal mode, the
mode will change as follows:
(2) When a 1080i signal is being received, the mode is set to FULL, and
aspect switching is not possible.
(3) During PIP operation, ASPECT Controls are available only in the
main picture according to the receiving signal of the main picture.
(4) During SPLIT Screen, ASPECT Controls are not available.
46
Cable TV
When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4.
This does not apply when signal is input from VIDEO INPUT.
ANTENNA TERMINAL ON
THE BACK OF THE TV
To Antenna
Input
Incoming Cable from Antenna
or Cable TV System.
OUTPUT
SAP
CABLE BOX
POWER
TV/VIDEO
LIG
H
E
UT
DVD
AUX
DTV
CBL
RC
R
VR
DB
S
CH
CTIO
VOL
BBE
MENU
EXIT
Confirming
Confirm that registration with cable TV provider and connection of
equipment are completed. Turn the CABLE BOX on and select the
desired volume level.
N
A
TV
VC
T
M
T
ASPEC
INPUT
VOL
CH
RECALL
PAGE
CBL
2
POWER
2
3
4
5
6
7
8
9
PROG
PIP MIN
REW
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
3
SPLIT
MOVE
CBL
to confirm.
Press while pointing the remote control towards
the CABLE BOX.
Note:
The remote control code number is set for
Panasonic products.
When peripheral equipment does not operate,
reset code (See page 62 - 63).
0
PIP
Press
GUIDE
1
R-TUNE
1
Operate the CABLE BOX and select the desired volume level.
SEARCH
OPEN/CLOSE
SWAP
47
TIMER
The TIMER can switch the TV ON or OFF. Before attempting TIMER1 and TIMER2 confirm the CLOCK SET and adjust if
necessary. Then set TIMER1 and TIMER2.
Press to display the roller guide menu.
CH
CTIO
N
A
1
VOL
LOCK
VOL
CH
EXIT
TIMER
Press to rotate to TIMER.
Press to display TIMER.
CH
CTIO
N
A
2
VOL
TIMER
VOL
CLOCK SET
SLEEP
TIMER1
TIMER2
CH
Press to select the main menu.
TIME
DAY
12 : 00 AM
SUN
Proceed to each adjustment item of the
selected main menu.
3
To end Adjustment:
N
A
Press twice to return to the roller guide.
CH
CTIO
VOL
LOCK
VOL
EXIT
CH
TIMER
Press to exit roller guide.
This returns the set to normal viewing.
NORMAL PICTURE
CLOCK SET
CLOCK SET sets the present time. This is necessary to operate the TIMER features.
1
VOL
VOL
CH
48
TIMER
CH
CTIO
N
A
In TIMER menu press to select CLOCK SET.
Press to enter submenu field.
CLOCK SET
SLEEP
TIMER1
TIMER2
TIME
DAY
12 : 00 AM
SUN
TIMER
2
TIME
Set the time of day.
CH
CTIO
VOL
TIMER
CLOCK SET
SLEEP
TIMER1
TIMER2
Press to set hours AM or PM.
N
A
Press to select TIME
VOL
TIME
DAY
12 : 00 AM
SUN
TIME
DAY
12 : 00 AM
SUN
TIME
DAY
12 : 00 AM
SUN
CH
3
Press to move to minutes position.
VOL
CLOCK SET
SLEEP
TIMER1
TIMER2
Press to set minutes.
N
A
TIMER
CH
CTIO
VOL
CH
4
DAY
Set the day of the week.
TIMER
CH
CTIO
Press to select the day of the week.
N
A
Press to select DAY.
VOL
VOL
CLOCK SET
SLEEP
TIMER1
TIMER2
CH
SLEEP
SLEEP sets the sleep time.
1
In TIMER menu press to select SLEEP.
CLOCK SET
SLEEP
TIMER1
TIMER2
N
A
TIMER
CH
CTIO
VOL
VOL
Press to enter submenu field.
CH
30
CH
CTIO
N
A
2
HOW LONG ?
VOL
VOL
CH
Press to select the desired sleep time.
To turn off the timer select NO.
NO
30
60
90
49
TIMER
Timer1 and Timer2
In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and on
selected days.TIME must be entered in CLOCK SET to operate the TIMER features.
TIMER
CH
CTIO
N
A
In TIMER menu press to select TIMER1 or TIMER2.
VOL
VOL
Press to enter submenu field.
CH
DAY
CLOCK SET
SLEEP
TIMER1
TIMER2
DAILY
DAY
12 : 00 PM
ON TIME
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
Set the day of the week.
Press to select DAY.
N
A
TIMER
CH
CTIO
VOL
VOL
Press to set the day of the week.
(select day or days)
CH
ON TIME
Press to select ON TIME.
CH
CTIO
Press to set hours AM or PM.
N
A
DAILY
DAY
12 : 00 PM
ON TIME
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
Set the time of day.
1
VOL
CLOCK SET
SLEEP
TIMER1
TIMER2
VOL
TIMER
CLOCK SET
SLEEP
TIMER1
TIMER2
DAILY
DAY
ON TIME 12 : 00 PM
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
CH
Press to move to minutes position.
2
TIMER
CH
CTIO
A
N
Press to set minutes.
VOL
VOL
CH
OFF TIME
Press to set hours AM or PM.
N
A
CH
CTIO
VOL
DAILY
DAY
12 : 00 PM
ON TIME
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
Set the time of day.
Press to select OFF TIME.
1
CLOCK SET
SLEEP
TIMER1
TIMER2
VOL
TIMER
CLOCK SET
SLEEP
TIMER1
TIMER2
DAILY
DAY
ON TIME 12 : 00 PM
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
CH
Press to move to minutes position.
2
VOL
VOL
CH
50
Press to set minutes.
N
A
TIMER
CH
CTIO
CLOCK SET
SLEEP
TIMER1
TIMER2
DAILY
DAY
12 : 00 PM
ON TIME
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
TIMER
ENTER CHANNEL
Press to select ENTER CHANNEL.
1
Press to select channel.
N
A
TIMER
CH
CTIO
VOL
VOL
CH
CLOCK SET
SLEEP
TIMER1
TIMER2
DAILY
DAY
12 : 00 PM
ON TIME
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
Press to select SET.
2
Press to select YES.
N
A
TIMER
CH
CTIO
VOL
VOL
YES
NO
CH
CLOCK SET
SLEEP
TIMER1
TIMER2
DAILY
DAY
ON TIME 12 : 00 PM
OFF TIME 13 : 00 PM
ENTER CHANNEL
5
SET
YES
TIMER Activation
The TIMER is active when the television is OFF or
ON. The television will switch to the selected
channel at the selected time set in the TIMER.
Turn Off After 90 Minutes
The television automatically turns OFF after 90
minutes when turned ON by the TIMER. If the OFF
time is selected or if a key is pressed, the automatic
OFF after 90 minutes will be cancelled.
Notes:
(1) When the power to the TV set is disrupted due to a power outage or similar problem, after power is restored, the offtimer will be deactivated and the TV will be in standby mode.
(2) To see the remaining sleep time, press the RECALL button.
51
LOCK Feature
Select LOCK SET to prevent video games and VCR tapes from being viewed.
Press to display the roller guide menu.
CH
CTIO
N
A
1
VOL
EXIT
VOL
LOCK
TIMER
CH
Press to rotate to LOCK.
Press to display LOCK menu.
CH
CTIO
LOCK
MODE
HOW LONG ?
N
A
2
VOL
VOL
CH
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
CHANGE CODE
MODE
1
To use LOCK options ENTER CODE FIRST.
2
LOCK
3
4
5
6
7
8
9
Use the remote numeric keypad to enter a four-digit
secret code.
MODE
HOW LONG ?
After entering your secret code for the first time,
the onscreen display will change to CHANGE
CODE.
0
OFF
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
ENTER CODE
FIRST
Notes:
(1) Use a code that is easy to remember and record it in a safe place.
(2) If you do not remember your code, LOCK will unlock in 12, 24, or 48 hours, depending on the current setup. Be cautious
when selecting ALWAYS. If ALWAYS is selected, and you forget your secret code, the TV must be serviced by a
qualified technician to clear the LOCK setup.
(3) If you select CHANGE CODE, and you change your code from the one used in the LOCK menu, your new code
becomes the controlling code.
LOCK SET
CH
CTIO
VOL
VOL
OFF
GAME
CHANNEL
CH
Proceed to each adjustment menu.
MODE
52
Function
OFF
Turns Lock function off.
GAME
Lock CH 3, 4 and Video inputs.
CHANNEL
Lock up to four channels.
ALL
Locks all channels and video inputs.
LOCK
MODE
HOW LONG ?
Press to select LOCK MODE.
N
A
In MODE submenu press to select LOCK SET.
ALL
LOCK SET
OFF
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
CHANGE CODE
LOCK Feature
Press twice to return to the roller guide.
CH
CTIO
N
A
To end Adjustment:
VOL
VOL
EXIT
CH
LOCK
TIMER
Press to exit roller guide.
This returns the set to normal viewing.
NORMAL PICTURE
OFF
LOCK
OFF
LOCK MODE
CH
CTIO
N
A
In LOCK MODE press to select OFF.
VOL
VOL
TO SELECT LOCK MODE
CH
GAME
In LOCK MODE press to select GAME.
LOCK MODE
VOL
GAME
LOCKS CH 3, 4 AND
VIDEO INPUTS
CH
CTIO
N
A
1
LOCK
VOL
TO SELECT LOCK MODE
CH
Press ACTION twice.
Press to highlight HOW LONG ?
2
N
A
LOCK
CH
CTIO
VOL
VOL
CH
Press to select 12HOURS, 24HOURS, 48HOURS
or ALWAYS.
12HOURS
24HOURS
ALWAYS
48HOURS
MODE
HOW LONG ?
12HOURS
53
LOCK Feature
CHANNEL
In LOCK MODE press to select CHANNEL.
1
LOCK MODE
VOL
CHANNEL
LOCKS THESE CHANNELS
3
N
A
LOCK
CH
CTIO
VOL
TO MOVE CURSOR
TO SELECT LOCK MODE
CH
LOCK
LOCK MODE
Press to select channel position.
CH
CTIO
N
A
2
VOL
VOL
TO MOVE CURSOR
TO SELECT CHaNNEL
Press to select channels.
(Or use remote numeric keypad to select channels.)
CH
1
2
3
4
5
6
7
8
9
CHANNEL
LOCKS THESE CHANNELS
3
0
3
Repeat step 2 for up to four channels.
Press ACTION twice.
CH
CTIO
VOL
LOCK
MODE
HOW LONG ?
N
A
4
VOL
12HOURS
CH
Press to highlight HOW LONG ?
Press to select 12HOURS, 24HOURS, 48HOURS
or ALWAYS.
CH
CTIO
N
A
5
VOL
VOL
CH
12HOURS
24HOURS
ALWAYS
48HOURS
ALL
In LOCK MODE press to select ALL.
1
LOCK MODE
N
A
LOCK
CH
CTIO
VOL
LOCKS ALL CHANNELS
AND VIDEO INPUTS
VOL
CH
TO SELECT LOCK MODE
Press ACTION twice.
Press to highlight HOW LONG ?
CH
CTIO
N
A
2
VOL
VOL
CH
Press to select 12HOURS, 24HOURS, 48HOURS
or ALWAYS.
12HOURS
24HOURS
ALWAYS
48HOURS
LOCK
MODE
HOW LONG ?
Note:
PG will display on screen if a blocked channel or video input is selected.
54
12HOURS
ALL
V-CHIP Menu OPERATION
In the United States and Canada, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE) and
TV PARENTAL GUIDELINES. Its function is to block programs by following the rating data in the XDS data packets sent
from broadcasting stations. The user can select which rating programs should be blocked by using the LOCK MENU
options.
Press to display the roller guide menu.
CH
CTIO
N
A
1
VOL
VOL
CH
EXIT
Press to rotate to LOCK.
TIMER
Press to display LOCK menu.
CH
CTIO
N
A
2
LOCK
VOL
VOL
CH
LOCK
3
1
2
3
4
5
6
7
8
9
Use the numeric keypad to enter your number digit
code.
(Use a code that is easy to remember and record it
in a safe place.)
MODE
HOW LONG ?
OFF
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
ENTER CODE
FIRST
0
Press to enter the BLOCK PROGRAM field.
4
Press to select the desired menu.
N
A
LOCK
CH
CTIO
VOL
VOL
MODE
HOW LONG ?
The menu will change as follows:
CH
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. TV PROGRAMS
ON
STATUS
CHANGE CODE
U.S. TV PROGRAMS
CANADIAN ENGLISH
U.S. MOVIES
CANADIAN FRENCH
Proceed to the selected menu.
After finished with adjustments in the selected menu:
LOCK
CH
CTIO
N
A
1
Press twice to return to MODE in LOCK
menu.
VOL
MODE
HOW LONG ?
12HOURS
VOL
CH
Press to select HOW LONG?
Press to select 12HOURS/24HOURS/48HOURS /
ALWAYS.
CH
CTIO
N
A
2
VOL
VOL
CH
12HOURS
24HOURS
ALWAYS
48HOURS
LOCK
MODE
HOW LONG ?
12HOURS
55
V-CHIP Menu OPERATION
U.S. TV PROGRAMS
CH
CTIO
N
A
This TV model features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block
various types of TV programs. PIP will also be blocked automatically.
VOL
VOL
In U.S. TV PROGRAMS press to highlight
STATUS.
Press to display U.S. TV PROGRAMS RATING
CHART.
LOCK
MODE
HOW LONG ?
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. TV PROGRAMS
ON
STATUS
CHANGE CODE
CH
LOCK
Proceed to the following adjustments.
MODE
HOW LONG ?
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
CHANGE CODE
U.S. TV PROGRAMS RATING CHART
Press to select U.S. TV PROGRAMS.
1
ON
U.S. TV PROGRAMS
VIEW NR PROGRAMS ? YES
SETTING:
BASIC
TV-Y
TV-Y7 FV
Press to select U.S. TV PROGRAMS ON or OFF.
N
A
LOCK
CH
CTIO
VOL
VOL
ON
OFF
CH
TV-G
TV-PG
TV-14
TV-MA
Press to select VIEW NR PROGRAMS?.
2
ON
U.S. TV PROGRAMS
VIEW NR PROGRAMS ? YES
BASIC
SETTING:
TV-Y
TV-Y7 FV
Press to select VIEW NR PROGRAMS? YES or NO.
N
A
LOCK
CH
CTIO
VOL
VOL
YES
NO
YES: NR programs will be received.
NO: NR programs will be blocked.
CH
TV-G
TV-PG
TV-14
TV-MA
V S L D
V S L D
V S L
Press to select SETTING.
3
N
A
LOCK
CH
CTIO
VOL
VOL
CH
ON
U.S. TV PROGRAMS
VIEW NR PROGRAMS ? YES
BASIC
SETTING:
TV-Y
TV-Y7 FV
Press to select BASIC or DETAILED.
BASIC:
Allows you to select only general ratings
such as TV-Y, TV-PG, etc.
DETAILED: Allows you to select both general ratings
and content such as V, L, etc.
Note: See Customer Caution.
TV-G
TV-PG
TV-14
TV-MA
V S L D
V S L D
V S L
Press to move between different ratings.
4
N
A
LOCK
CH
CTIO
VOL
VOL
CH
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Perform Step 4 for each rating.
Note: See the U.S. TV PROGRAMS RATINGS CHART.
56
V S L D
V S L D
V S L
ON
U.S. TV PROGRAMS
VIEW NR PROGRAMS ? YES
BASIC
SETTING:
TV-Y
TV-Y7 FV
TV-G
TV-PG
TV-14
TV-MA
V S L D
V S L D
V S L
V-CHIP Menu OPERATION
Customer Caution
The V-Chip system that is used in this set is capable of blocking “NR” programs
(non rated, not applicable and none) per FCC Rules Section15.120(e)(2). If the
option of blocking “NR” programs is chosen “unexpected and possibly confusing
results may occur, and you may not receive emergency bulletins or any of the
following types of programming:”
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
• Locally originated programming
• News
• Political
• Public Service Announcements
• Religious
• Sports
• Weather
U.S. TV PROGRAMS RATINGS CHART
NR
Not Rated. SEE CUSTOMER CAUTION above.
TV-Y
All children. The themes and elements in this program are specifically designed for a very
young audience, including children from ages 2-6.
TV-Y7
Directed to older children. Themes and elements in this program may include mild physical or
comedic violence, or may frighten children under the age of 7.
TV-G
General audience. It contains little or no violence, no strong language, and little or no sexual
dialogue or situations.
TV-PG
Parental guidance suggested. The program may contain infrequent coarse language, limited
violence, some suggestive sexual dialogue and situations.
TV-14
Parents strongly cautioned. This program may contain sophisticated themes, sexual content,
strong language and more intense violence.
TV-MA
Mature audiences only. This program may contain mature themes, profane language, graphic
violence, and explicit sexual content.
FV
FANTASY/CARTOON VIOLENCE
V
VIOLENCE
S
SEX
L
OFFENSIVE LANGUAGE
D
DIALOGUE WITH SEXUAL CONTENT
57
U.S. MOVIES
This TV model features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or
video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. PIP will
also be blocked automatically.
In U.S. MOVIES press to highlight STATUS.
Press to display U.S. MOVIES RATING CHART.
N
A
LOCK
CH
CTIO
VOL
VOL
CH
Proceed to the following adjustments.
MODE
HOW LONG ?
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
CHANGE CODE
MODE
HOW LONG ?
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
CHANGE CODE
58
V-CHIP Menu OPERATION
Canadian English
The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two
rating systems used in Canada. PIP will also be blocked automatically.
In CANADIAN ENGLISH press to highlight STATUS.
1
CH
CTIO
N
A
LOCK
VOL
VOL
Press to display CANADIAN ENGLISH RATING
CHART.
MODE
HOW LONG ?
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
CHANGE CODE
LOCK
CH
CANADIAN ENGLISH
VIEW E PROGRAMS ?
C
C8+
G
PG
14+
18+
Press to select CANADIAN ENGLISH.
CH
CTIO
Press to select CANADIAN ENGLISH ON or OFF.
N
A
2
VOL
ON
VOL
OFF
YES
OFF
CH
Press to select VIEW E PROGRAMS?
3
VOL
CANADIAN ENGLISH
VIEW E PROGRAMS ?
Press to select VIEW E PROGRAMS? YES or NO.
N
A
LOCK
CH
CTIO
YES
VOL
C
C8+
G
PG
14+
18+
NO
Note:
E (Exempt) programming includes: news, sports,
documentaries and other information programming, talk
shows, music videos, and variety programming.
CH
OFF
YES
Press to move between different ratings.
4
N
A
LOCK
CH
CTIO
VOL
VOL
CH
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Note: See the CANADIAN ENGLISH RATING CHART.
CANADIAN ENGLISH
VIEW E PROGRAMS ?
OFF
YES
C
C8+
G
PG
14+
18+
CANADIAN ENGLISH RATINGS CHART
E
Exempt - Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
C
Programming intended for children under age 8. No offensive language, nudity or sexual
content.
C8+
G
Programming generally considered acceptable for children 8 years and over. No profanity,
nudity or sexual content.
General programming, suitable for all audiences.
PG
Parental Guidance suggested. Some material may not be suitable for children.
14+
Programming contains themes or content which may not be suitable for viewers under the age
of 14. Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens
and early teens.
18
ADULTS ONLY
59
V-CHIP Menu OPERATION
Canadian French
The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings
categories. PIP will also be blocked automatically.
In CANADIAN FRENCH press to highlight STATUS.
CH
CTIO
N
A
1
VOL
VOL
Press to display CANADIAN FRENCH RATING
CHART.
LOCK
MODE
HOW LONG ?
CH
CHANNEL
LOCK SET
BLOCK PROGRAMS :
U.S. MOVIES
ON
STATUS
CHANGE CODE
LOCK
CANADIAN FRENCH
VIEW E PROGRAMS ?
Press to select CANADIAN FRENCH.
CH
CTIO
G
8 ANS+
13ANS+
16ANS+
18ANS+
Press to select CANADIAN FRENCH ON or OFF.
N
A
2
VOL
VOL
ON
OFF
YES
OFF
CH
Press to select VIEW E PROGRAMS?
3
VOL
CANADIAN FRENCH
VIEW E PROGRAMS ?
Press to select VIEW E PROGRAMS? YES or NO.
N
A
LOCK
CH
CTIO
VOL
YES
G
8 ANS+
13ANS+
16ANS+
18ANS+
NO
Note:
E (Exempt) programming includes: news, sports,
documentaries and other information programming,
talk shows, music videos, and variety programming.
CH
OFF
YES
Press to move between different ratings.
4
N
A
LOCK
CH
CTIO
VOL
VOL
CH
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Note: See the CANADIAN FRENCH RATINGS CHART.
CANADIAN FRENCH
VIEW E PROGRAMS ?
OFF
YES
G
8 ANS+
13ANS+
16ANS+
18ANS+
13ANS+, 16ANS+ and 18ANS+ will
be blocked.
CANADIAN FRENCH RATINGS CHART
60
E
Exempt - Exempt programming.
G
General - Programming intended for audience of all ages. Contains no violence, or the
violence content is minimal or is depicted appropriately.
8 ans+
8+ General - Not recommended for young children. Programming intended for a broad
audience but contains light or occasional violence. Adult supervision recommended.
13ans+
Programming may not be suitable for children under the age of 13 - Contains either a few
violent scenes or one or more sufficiently violent scenes to affect them. Adult supervision
strongly suggested.
16ans+
Programming may not be suitable for children under the age of 16 - Contains frequent scenes
of violence or intense violence.
18ans+
18 ans +Programming restricted to adults. Contains constant violence or scenes of extreme
violence.
V-CHIP Menu OPERATION
Blocking Message
If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio
will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all
locks and rating blocks are disabled until the TV is turned off or until all settings are off.
Note:
If you enter your four-digit secret code to override rating blocks, you must reset
all rating blocks by either reprogramming or turning the TV off.
PROGRAM RATING EXCEEDED
ACCESS CODE
Split Screen Blocking Message
Split Screen function is available when V-Chip is activated. If the program being viewed in Split Screen exceeds the set
rating limit, Split Screen will disappear and a blocking message will appear on screen for 5 seconds.
Note:
Enable Split Screen functions by setting Lock Set, U.S. TV PROGRAM, U.S.
MOVIES, CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF.
PROGRAM
RATING
EXCEEDED
ACCESS
CODE
PIP Blocking Message
PIP function is available when V-Chip is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will
disappear and a blocking message will appear on screen for 5 seconds.
Note:
Enable PIP functions by setting Lock Set, U.S. TV PROGRAM, U.S. MOVIES,
CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF.
PIP RATING
EXCEEDED
Press twice to return to the roller guide.
CH
CTIO
N
A
To end Adjustment:
VOL
VOL
EXIT
LOCK
CH
Press to exit roller guide.
This returns the set to the normal viewing.
NORMAL PICTURE
61
Operating peripheral equipment using the remote control
Programming The Illuminated Remote Control Using Access Codes
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
1
Confirm that the external component is plugged in and operating.
2
Turn the component off.
A
POWER
+
CH
CTIO
Press POWER and ACTION together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
Release the POWER and ACTION keys.
N
3
VOL
VOL
CH
4
DVD
AUX
DTV
CBL
R
DB
S
TV
5
RC
VR
VC
1
2
3
4
5
6
7
8
9
Press the mode key.
The mode key will illuminate steadily, all others will go out.
Enter the 3-digit component code using the Remote Control numeric keypad.
0
6
POWER
Press the Remote Control
POWER
to test the component. If the procedure is successful,
the component will turn on.
Default Modes For Remote Control
Device
Operates
TV
TV (Panasonic Only)
DTV
DTV (Panasonic Only)
CABLE
CABLE (Preset)
DBS
DBS (Preset)
VCR
VCR (Preset)
DVD/CD
DVD and CD (Preset)
Personal Video Recorders,
AUX
Tape and VCR2
Audio Receiver (Preset)
RCVR
Default
Panasonic TV Codes
Panasonic DTV Codes
Panasonic CABLE Codes
Panasonic DBS Codes
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal Video
Recorders Code
Panasonic RCVR Code
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes
longer than 30 seconds,the programming will fail.
62
Operating peripheral equipment using the remote control
Programming Without A Code (When the code is not known)
This procedure searches all codes and is called the “sequence method.”
1
Confirm that the external component is plugged in and on.
2
Turn the component off.
SAP
POWER
TV/VIDEO
LIG
H
AUX
DTV
CBL
RC
3
A
VR
+
POWER
DB
VOL
CH
RECALL
PAGE
4
DVD
AUX
DTV
CBL
R
VC
1
2
3
4
5
6
7
8
9
R-TUNE
DB
S
5
PROG
A
N
CH
CTIO
VOL
PLAY
PIP MAX
FF
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
SPLIT
MOVE
VOL
CH
6
POWER
SWAP
Press the Remote Control
POWER
to test the component. If the procedure was
successful, the component will turn on.
Note:
Repeat the above steps until the component code is found. It may take many
attempts before the correct code is found.
CH
CTIO
After the code is found, press ACTION to store the code.
N
7
A
PIP
SEARCH
OPEN/CLOSE
Press the mode key.
The mode key will illuminate steadily, all others will go
out.
Press to move forward to the next code, or to move
backward.
0
PIP MIN
REW
RC
VR
GUIDE
TV
EXIT
Press POWER and ACTION together, for at least 5
seconds.
After 5 seconds, all the illuminated mode keys will
begin to flash.
Release the POWER and ACTION key.
VOL
CH
CH
CTIO
VOL
BBE
MENU
VOL
N
A
S
CH
CTIO
N
DVD
R
TV
VC
T
M
T
ASPEC
E
UT
VOL
VOL
CH
Note:
The step and set mode will start from the current device (not the beginning of the
list, except for the first time).
63
Operating peripheral equipment using the remote control
Infrared Codes Index
The remote control is capable of operating many brands of peripheral equipment. Refer to pages 62 and 63 for programming procedures.
Note: The remote control memory is limited and therefore some models may not operate. The remote control is not
designed to control all features available in all models.
Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control. Refer to
pages 16 and 67 - 68 for details on operating peripheral equipment using the remote control.
Infrared Remote Codes for Specific Components
Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a
handy reference whenever you need to reprogram your remote control.
CABLE
VCR
CD
Cable Box
Video Cassette Recorder
Compact Disc Player
DBS
RCVR
LD
Digital Broadcast System
Receiver or Amplifier
Laser Disc Player
Other Component
Other Component
Other Component
Other Component
Other Component
Other Component
Brand
Orion
Panasonic
J.C.Penney
Pentax
Philco
Philips
Pioneer
Proscan
Quasar
Radio Shac
RCA
Realistic
Samsung
Sansui
Sanyo
Scott
Sears
Sharp
Shintom
Signature 2000
Singer
Sony
Sylvania
Tashiro
64
Code
320, 326
321, 322, 323, 324
300, 305, 310, 311, 324, 339, 345
300, 311, 345
320, 323, 324, 326, 331, 343
323, 324, 331
323
300, 301, 302, 323, 324, 331,
333, 345, 346
321, 322, 323, 324
305, 309, 324, 333, 336, 340
300, 301, 302, 323, 324, 331,
333, 345, 346
305, 309, 324, 336, 340
302, 304, 333
320, 326, 339, 352
305, 309, 313
301, 302, 304, 309, 320, 326,
338, 340, 347, 348
300, 305, 306, 307, 308
335, 336
317
335
317
328, 329, 330
323, 324, 331
306
Operating peripheral equipment using the remote control
Codes for Personal Video Recorders
R
VC
Brand
Panasonic Replay
Philips Tivo
Sony Tivo
Code
100
101
102
Codes for DVD
DVD
Brand
Denon
Ferguson
JVC
Mitsubishi
Nordmende
Panasonic
Philips
Pioneer
RCA
Code
100
101
109
105
101
100
103
102
101
Brand
Saba
Samsung
Sharp
Sony
Technics
Thomson
Toshiba
Yamaha
Zenith
101
110
108
104
100
101
103
100
107
Code
Brand
Optimus
Panasonic
Philips
Pioneer
Quasar
RCA
Sansui
Sanyo
Scott
Sharp
Sherwood
Sony
Soundesign
Teac
Technics
Victor
Yamaha
Code
208, 218, 220, 222
224, 225, 227
229, 230
208
224, 225, 227
231, 237, 238, 247
210, 246
205
210, 246
242, 243
220
228
244
212, 216, 218
224, 225, 227
240, 241, 245
202, 203, 204
Brand
Philips
Pioneer
RCA
Sansui
Sharp
Sony
Teac
Technics
Yamaha
Code
222
204
226, 227, 228
205, 210
231
219, 220
210, 211, 215
216, 218
201, 202
Codes for CD
DVD
Brand
Admiral
Aiwa
Carver
Denon
Emerson
Fisher
Harman/Kardon
Hitachi
Jensen
JVC
Kardon
Kenwood
LXI/Sears
Magnavox
Marantz
McIntosh
Nakamichi
Onkyo
Code
226
233, 235
229
242
239
205
219, 220, 221, 223
207
234
240, 241, 245
223
200, 201, 211, 245
236
229, 232
229
221
210
214, 215
Codes for Cassette Deck
AUX
Brand
Aiwa
Denon
Fisher
Jensen
JVC
Kenwood
Marantz
Nakamichi
Onkyo
Panasonic
Code
223, 224, 225
231
203
214
229, 230
200, 207
202
205
208, 209, 213
216, 218
65
Operating peripheral equipment using the remote control
Codes for Receivers
RC
VR
Brand
Admiral
Aiwa
Denon
Fisher
Garrard
Harman Kardon
Jensen
JVC
Kenwood
Magnavox
Marantz
Mclntosh
Nakamichi
Onkyo
Code
120
125, 126
134, 135, 136
104
113
115, 123
129
132, 133
100, 108
127
124
116
106
109, 114
Brand
Optimus
Panasonic
Philips
Pioneer
Quasar
RCA
Sansui
Sharp
Sony
Soundesign
Teac
Technics
Victor
Yamaha
Code
103, 127, 130, 131
118, 119, 121
123
105, 107
118, 119, 121
103, 105, 127, 130, 131
103, 111, 139
134, 137
122
138
111, 112, 113
118, 119, 121
132, 133
101, 102
Code
124
125, 132
105, 132
105, 122
112, 113
124, 125, 132
129
134
105, 132
122
111, 119, 120, 121, 122, 123,
124, 125, 126, 127
112, 118, 140, 141, 142, 145
103, 124
103, 104, 105
133
130
105, 132
102, 137, 139
109, 110, 114
106, 107, 128, 129, 130
101, 116
105, 132
Brand
Puser
RCA
Realistic
Regal
Regency
Rembrandt
Samsung
Scientific Atlanta
Slmark
Sprucer
Stargate
Tel eview
Texscan
Tocom
Toshiba
Unika
Universal
Videoway
Viewstar
Zenith
Zenith /Drae
Satellite
Code
132
115
132
112, 118, 140, 141, 142, 145
134
105, 132, 137
105
111, 112, 113
101, 105
105, 110
105, 132
101, 105
144
135
104
125, 132
122, 132
106
129, 130
100, 117
100
Code
105, 115, 116
Brand
Magnavox
Panasonic
Philips
Primestar
Proscan
RCA
Sony
Star Choice
Toshiba
Uniden
Code
101, 102
104
101, 102
108
106, 109, 110, 113
106, 109, 110, 113
107
103, 108
100
101, 102
Codes for Cable Box
CBL
Brand
ABC
Archer
Cableview
Citizen
Curtis
Diamond
Eagle
Eastern
GC Brand
Gemini
General
Instrument/Jerrold
Hamlin
Hitachi
Macom
Magnavox
Memorex
Movietime
Oak
Panasonic
Philips
Pioneer
Pulsar
Codes for DBS
DB
S
66
Brand
Dish Network
(Echostar)
Echo Star
Express VU
G.E.
G.I.
(General Instrument)
Gradiente
Hitachi
HNS (Hughes)
105
105, 115
106
108
114
103, 111, 112
103
Operating peripheral equipment using the remote control
Mode Operational Key Chart
This chart defines which keys that are operational after programming (if needed), while in the selected remote control
mode TV, DTV, CABLE, DBS, VCR, DVD ...etc.
KEY NAME
TV MODE
DTV MODE
CABLE MODE
DBS MODE
POWER
POWER
POWER
POWER
POWER
SAP ON/OFF
-
-
-
MUTE
TV MUTE
CBL MUTE
TV MUTE
TV ASPECT
DTV ASPECT
-
DBS ASPECT
TV INPUT SW
TV INPUT SW
TV INPUT SW
TV INPUT SW
REMOTE BUTTONS
REMOTE BUTTONS
REMOTE BUTTONS
REMOTE BUTTONS
CHANNEL UP/DOWN
NAVIGATION UP/DOWN
ACTION
ACTION
ENTER
DBS ACTION
VOL + / -
NAVIGATION RIGHT/LEFT
CABLE VOL + / -
DBS NAVIGATION RIGHT/LEFT
-
MENU
-
DBS MENU
DISPLAY
PROGRAM INFO.
TV DISPLAY
DBS PROG.INFO
-
EXIT (EPG)ELECTRONIC
PROGRAM GUIDE
-
DBS EXIT
-
-
-
DBS PAGE UP/DOWN
-
GUIDE (EPG)ELECTRONIC
PROGRAM GUIDE
-
DBS GUIDE
Select Channel
Select Channel
Select Channel
Select Channel
PREVIOUS CHAN
OR VIDEO MODE
PREVIOUS STB CHAN
CABLE PREVIOUS
DBS PREVIOUS
-
DTV PROGRAM/DASH
-
DBS PROGRAM/DASH
PIP MINIMIZE/
MAXIMIZE
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Info (EPG) ELECTRONIC
PROGRAM GUIDE
VCR RECORD
DBS RECORD
PIP FREEZE
-
-
TV/DBS SWITCH
PIP or SPLIT
CHAN UP/DOWN
-
TV CHANNEL UP/DOWN
DBS CHANNEL UP/DOWN
PIP SEARCH
-
-
-
PIP ON/OFF
-
-
-
SPLIT ON/OFF
-
-
-
MOVE PIP
-
-
-
PIP or SPLIT SWAP
-
-
-
SAP
MUTE
ASPECT
TV/VIDEO
CH
CTIO
N
A
LIGHT
VOL
VOL
CH
BBE
MENU
RECALL
EXIT
PAGE
GUIDE
1
2
3
4
5
6
7
8
9
CABLE CHANNEL UP/DOWN DBS NAVIGATION UP/DOWN
0
R-TUNE
PROG
PIP MIN
REW
PIP MAX
FF
PLAY
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
PIP
SPLIT
MOVE
SWAP
67
Operating peripheral equipment using the remote control
KEY NAME
POWER
SAP
VCR MODE
(DVD)
DVD MODE
(CD)
AUX MODE
(VCR2)
(TAPE)
RCVR MODE
POWER
POWER
POWER
POWER
POWER
POWER
-
-
-
-
-
-
TV MUTE
TV MUTE
RCVR MUTE
TV MUTE
RCVR MUTE
RCVR MUTE
-
-
-
-
-
-
TV INPUT SW
TV INPUT SW
-
TV INPUT SW
TV INPUT SW
TV INPUT SW
MUTE
ASPECT
TV/VIDEO
LIGHT
CH
CTIO
N
A
REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS
VOL
VOL
CH
BBE
MENU
RECALL
EXIT
PAGE
GUIDE
1
2
3
4
5
6
7
8
9
VCR CHAN
UP/DOWN
NAVIGATION
UP/DOWN
NEXT/PREVIOUS VCR CHANNEL
TRACK
UP/DOWN
TV ACTION
SELECT
TV VOLUME +/-
NAVIGATION
UP/DOWN
-
DVD MENU
-
-
-
-
ONSCREEN VCR
DISPLAY
DVD DISPLAY
TIME FORMAT
ONSCREEN VCR
DISPLAY
-
-
-
-
-
-
-
-
-
SKIP +/-
SKIP +/-
-
-
-
-
TITLE
NEXT TRACK
-
-
-
TV ACTION
-
TUNER +/-
-
-
RCVR VOLUME
TV VOLUME +/- RCVR VOLUME +/- RCVR VOLUME +/UP/DOWN
1.... AV1
2.... AV2
3.... AV3
4.... AV4
5.... CD
6.... TUNER
7.... PHONO
8.... TAPE
9.... AUX
Select Channel
Select Chapter
Number
Select Track
Number
Select Channel
-
-
-
-
-
DECK A/B
-
-
-
-
-
-
-
VCR REW/FF
SKIP SEARCH
<<REW/>>FF
SEARCH REW/FF
VCR REW/FF
TAPE REW/FF
SURROUND -/+
PLAY
PLAY
PLAY
PLAY
PLAY
-
PAUSE
PAUSE
PAUSE
PAUSE
PAUSE
-
STOP
STOP
STOP
STOP
STOP
-
VCR RECORD
-
-
VCR RECORD
TAPE RECORD
-
TV/VCR SWITCH
-
-
TV/VCR SWITCH
-
-
VCR CHANNEL
UP/DOWN
-
-
VCR CHANNEL
UP/DOWN
-
-
-
OPEN/CLOSE
OPEN/CLOSE
-
OPEN/CLOSE
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0
R-TUNE
PROG
PIP MIN
REW
PIP MAX
FF
PLAY
PAUSE
STOP
REC
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
PIP
SPLIT
MOVE
SWAP
68
69
Cleaning
To ensure continued excellent performance by this product, periodic cleaning is recommended.
70
The unit contains many plastic
parts. For this reason DO NOT use
benzine, thinner or other chemicals
to clean the unit.
Dust will accumulate on the picture
screen. Please wipe with a soft
cloth from time to time. If you use
a chemically treated cloth, please
be careful to follow the instructions
that come with the cloth.
DO NOT bring into contact with
insecticide or other volatile
substances.
DO NOT allow the unit to come into
contact for extended periods with
rubber or vinyl products.
Remove dirt and soiling by wiping
with a light cloth.
Even if the unit is heavily soiled,
do not apply cleaner directly to the
unit. Soak a cloth in a solution of
neutral cleanser thinned with
water. Then wring out the cloth,
wipe the unit clean, and finish by
wiping with a dry cloth.
Specifications
CT-30WX52
CT-34WX52
Power Source
AC 120 V, 60 Hz
AC 120 V, 60 Hz
Power Consumption
Average use : 170 W (Maximum Current 3.6 A)
Stand-by condition : 0.2 W
Average use : 170 W (Maximum Current 3.6 A)
Stand-by condition : 0.2 W
CRT
30-inch, 16 : 9 aspect ratio
34-inch, 16 : 9 aspect ratio
Screen Size
25.95 ” (659.1 mm) (W) ×
14.59 ” (370.7 mm) (H) ×
29.77 ” (756.2 mm) (diagonal)
29.36 ” (745.9 mm) (W) ×
16.5 ” (419.5 mm) (H) ×
33.68 ” (855.7 mm) (diagonal)
Dimensions
(W×H×D)
32.6 ” (827 mm) × 22.8 ” (579 mm) ×
21.1 ” (535 mm)
36.4 ” (926 mm) × 30.6 ” (651 mm) ×
23.1 ” (584 mm)
Mass (Weight)
126 lb. (57 kg) Net
172 lb. (78 kg) Net
Channel Capability-181
VHF-12 : UHF-56 : Cable-125
Speaker
Sound Audio Output
Headphones
FEATURES
4 Speakers
30 W [ 15 W + 15 W ] ( 10 % THD )
M3 (3.5 mm) Jack × 1
Two screen display fuctions
BBE
CLOSED CAPTION
3D Y/C FILTER
LINEAR PIP
V-Chip
Remote control Transmitter
EUR7603Z70
Accessories Supplied R6 (AA) Battery × 2
Operating Conditions
Temperature : 34 °F - 104 °F (0 ° – 40 °C)
Humidity : 20 % - 80 % (non-condensing)
Connection Terminals AV INPUT 1- 4
VIDEO
1.0 Vp-p (75 Ω)
(Phono Jack Type)
S-VIDEO
Y : 1.0 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
(Mini DIN 4-pin)
AUDIO L-R
0.5 Vrms
(Phono Jack Type × 2)
AV PROG. OUT
VIDEO
1.0 Vp-p (75 Ω)
(Phono Jack Type)
AUDIO L-R
0.5 Vrms
(Phono Jack Type × 2)
TO AUDIO AMP
AUDIO L-R
0.5 Vrms
(Phono Jack Type × 2)
COMPONENT VIDEO
INPUT1-2
Y
PB / PR
AUDIO L-R
1.0 Vp-p (including synchronization)
± 0.35 Vp-p
0.5 Vrms
(Phono Jack Type × 2)
Note:
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
71
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this
serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent
record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
Serial Number
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico Inc. (“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Printed in Japan
MBS0402S1052(MS)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement