Panasonic Outboard Motor UB-8325 User manual

Operating Instructions

With Installation Manual

(for qualified service personnel)

Electronic Board

(Interactive Panaboard)

Model No.

UB-8325

Panaboard

Stand is optional.

•

To assemble this unit, please refer to the Installation manual on page 83 through 99.

•

Before operating this unit, please read these instructions completely and keep them carefully for future reference.

•

Because of the nature of the print film, all the printed text will remain on the film.

•

This unit is designed for installation by a qualified servicing dealer.

Installation performed by non-authorized individuals could cause safety-related problems with the operation of this equipment.

For U.S.A. only

:

•

To locate the closest authorized dealer in your area, please call 1-800-449-8989.

Thank you for purchasing the Panasonic Electronic Board.

For optimum performance and safety, please read these instructions carefully.

Q’ty

•

Thermal transfer film . . . . . . . . . . . . . . 1

•

Markers (Black, Red, Blue-big) . . . . . . 1 each

• Eraser . . . . . . . . . . . . . . . . . . . . . . 1

•

Pen holder . . . . . . . . . . . . . . . . . . . . 2

•

Markers for interactive

(Black, Red, Blue, Green-small) . . . . . 1 each

•

Electronic Eraser . . . . . . . . . . . . . . . . 1

•

Eraser cloth (for Electronic Eraser) . . . . . . . 2

Accessories

Q’ty

•

Batteries (LR03 “AAA”) . . . . . . . . . . . . . 6

•

Power cord . . . . . . . . . . . . . . . . . . . 1

• USB cable [5 m (16’ 5 3 /

8

”)] . . . . . . . . . . . 1

•

A4 (Letter*

1

) size copy paper . . . . . . . . . 20

•

Software CD-ROM . . . . . . . . . . . . . . . 1

•

Operating Instructions . . . . . . . . . . . . . . 1

•

Wall-mounting template . . . . . . . . . . . . . 1

•

Warranty card*

2

. . . . . . . . . . . . . . . . . 1

*

1

Letter size is for U.S.A. and Canada models.

* 2 for U.S.A. model only.

* The markers (big) and the eraser are used for other than the interactive function.

* The markers for interactive (small) are used while inserted in the pen holder.

In this manual, the pen holder with a marker for interactive (small) is called the Electronic Pen.

The Electronic Pen and the Electronic Eraser are used with the interactive function.

* The stand and wall-mounting kit are optional. By way of example, this manual describes an Electronic Board which is used with the stand.

Things you should keep a record of

Attach your sales receipt here

For your future reference

Date of purchase: _________________________ Serial number: ____________________________

Dealer’s name and address: ______________________________________________________________

Tel:

2

Warning about saving data

When the system storage device or any of its optional storage device is adversely effected by operational errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction, repair or inadvertently, the memory contents may be lost or changed. Before operating the system, make a point of reading the precautionary notes in the Operating Instructions and the help information, and observe them during operation.

Please observe carefully the following precaution:

• Make absolutely sure that all important data is saved by back-up or the original is saved.

The manufacturer hereby declares that it cannot be held accountable for any loss or change in any data stored on floppy disks, hard disks, optical disks, or other memory devices.

Federal Communications Commission Requirements

Note:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Warning:

To assure continued FCC compliance, the user must use only the provided power supply cord.

Also, any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

• Microsoft, Windows, PowerPoint and CalliGrapher are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

• IBM is a trademark of International Business Machines Corporation in the United States, other countries, or both.

• Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.

• Adobe, Acrobat, Acrobat Reader and Reader are either registered trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other countries.

• SANFORD and EXPO are registered ® U.S. trademarks of SANFORD or its Affiliates.

• All trademarks referred to in this manual are property of their respective companies.

The information given in this Operating Instructions is subject to change without notice.

3

Features

The UB-8325 is equipped with two interactive functions; Projector mode and Whiteboard mode, in addition to a regular electronic board that utilizes plain paper. It is possible to use this unit as follows.

■

Electronic Board Functions

•

Allows copying up to 9 copies per screen

•

Allows printing in 2 level contrast (Normal / Dark)

•

Allows printing of 2-screens at the time by compressing them into a single sheet of paper

■

Projector Mode (Interactive Function)

4

Connect the Interactive Panaboard to a computer that is connected to a projector and use the projector to project the image onto the Interactive Panaboard.

This is called the Projector mode.

In this mode, the following operations are possible:

• Operating the computer using the Electronic Pen with its cap on as a mouse

• Drawing handwritten lines or erasing it using the Electronic Pen or Electronic Eraser with its cap on in the projected image

• Saving the projected image to an image file and printing the projected image

• Recording the operations of drawing and erasing handwritten lines, playing back and editing the recorded operations later

In Projector mode, the projected computer image on the screen of the Interactive Panaboard can be operated by using the Electronic Pen as a mouse. You can execute the application and electronically write or erase notes. The electronically handwritten or partially erased computer image can be stored into an image file. This will help make your presentation more impressive to the attendants.

■

Whiteboard Mode (Interactive Function)

By connecting the Interactive Panaboard to a computer, the information written on the Interactive Panaboard is displayed on the computer in real-time.

This is called the Whiteboard mode.

In this mode, the following operations are possible:

• The information written on the Interactive Panaboard using the Electronic Pen with its cap off will be displayed on the computer screen at the same time.

• The information erased using the Electronic Eraser will be erased in the computer as well.

• You can save drawings and notes into a file which can later be printed.

• Allows the user to record the information being written or erased in a file that can be played back as a movie and it can be edited if needed.

■

Computer Interfacing

Panasonic Document Management System (hereafter referred to as Panasonic-DMS) has the following functions.

About the Panasonic-DMS, refer to the Document Management System operating instructions in the CD-ROM.

• Panasonic-DMS uses the TWAIN driver to scan monochrome images drawn on the UB-8325.

• Panasonic-DMS has a capability of managing documents (image files).

• The printer driver allows the printer of the UB-8325 to print documents from a computer.

5

6

Table of Contents

Page

Before You Start

For Your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

•

For Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

•

For users in the United Kingdom only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

•

CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

•

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

•

Electronic Pen and Eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using

Installing the Thermal Transfer Film. . . . . . . . . . . . . . . . . . . . . . . 18

Loading Copy Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

•

Copy Types and Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Replacing the Thermal Transfer Film . . . . . . . . . . . . . . . . . . . . . . 22

Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Setting the Electronic Pen and Eraser . . . . . . . . . . . . . . . . . . . . . 25

•

Setting the Electronic Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

•

Setting the Electronic Eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

•

Replacing the Eraser Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Installing Drivers and Software. . . . . . . . . . . . . . . . . . . . . . . . . . . 27

•

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

•

Contents of CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

•

Installing Drivers / Interactive Panaboard Software . . . . . . . . . . . . . . . . . . . . . 28

•

Installing the Panasonic-DMS Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

•

Removing Drivers / Interactive Panaboard Software . . . . . . . . . . . . . . . . . . . . 31

•

Removing the Panasonic-DMS Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the Panaboard in Projector Mode . . . . . . . . . . . . . . . . . . . 32

•

Precautions When Using a Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

•

Starting the Interactive Panaboard Software . . . . . . . . . . . . . . . . . . . . . . . . . . 33

•

Pop-up Menu Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

•

Basic Operation in Projector Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

•

Using the Desktop Drawing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Using the Panaboard in Whiteboard Mode . . . . . . . . . . . . . . . . . 49

•

Starting the Interactive Panaboard Software . . . . . . . . . . . . . . . . . . . . . . . . . . 49

•

Pop-up Menu Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

•

Basic Operation in Whiteboard Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Using the View Window or Whiteboard Window . . . . . . . . . . . . . 53

•

About View Window / Whiteboard Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

•

Managing IPB Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Help

Installation

Using the Panasonic-DMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

•

Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

•

Panaboard Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

•

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Daily Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

•

Cleaning the Screen and the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

•

Caring for the Eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

•

Cleaning the Printer Head, Platen Roller and Pick-up Roller. . . . . . . . . . . . . . 75

•

Replacing the Batteries in the Electronic Pen and the Electronic Eraser. . . . . 77

•

Replacing the Cloth of the Electronic Eraser . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

•

Meanings of Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

•

Optional and Separately Available Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Installation Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

7

For Your Safety

For Your Safety

To prevent severe injury and loss of life, read this section carefully before using the unit to ensure proper and safe operation of your unit.

CLASS 1 LED PRODUCT

The following graphic symbols are used in this

Operating Instructions manual.

WARNING

CAUTION

Denotes a potential hazard that could result in serious injury or death.

Denotes hazards that could result in minor injury or damage to the unit.

These symbols are used to alert operators to a specific operating procedure that must not be performed.

These symbols are used to alert operators to a specific operating procedure that must be emphasized in order to operate the unit safely.

For Users

8

WARNING

Power and Ground Connection

The power source voltage of this unit is listed on the nameplate. Only plug the unit into an AC outlet with the proper voltage.

If you use a cord with an unspecified current rating, the unit or plug may emit smoke or become hot to the touch.

When you operate this product, the power outlet should be near the product and easily accessible.

To ensure safe operation the power cord supplied must be inserted into a standard three-prong AC outlet which is effectively grounded (earthed) through the normal wiring.

The fact that the equipment operates satisfactorily does not imply that the power point is grounded (earthed) and that the installation is completely safe. For your safety, if in any doubt about the effective grounding (earthing) of the power point, consult a qualified electrician.

If the plug cannot be inserted into the AC outlet, contact a licensed electrician to replace the AC outlet with a properly grounded (earthed) one.

Do not defeat the purpose of the grounding

(earthing) plug (ex. do not use a conversion plug).

Plug the power cord firmly into an AC outlet.

Otherwise, it can cause fire or electric shock.

Do not pull, bend, rest objects on, or chafe the power cord and plug. Damage to the power cord or plug can cause fire or electric shock.

Do not attempt to repair the power cord or plug. If the power cord or plug is damaged or frayed, contact an authorized service representative for a replacement.

Ensure that the plug connection is free of dust. In a damp environment, a contaminated connector can draw a significant amount of current that can generate heat and eventually cause fire if left unattended over an extended period of time.

Never touch the plug with wet hands.

Danger of electric shock exists.

For Your Safety

Stop operation immediately if your unit emits smoke, excessive heat, abnormal smell or unusual noise. These conditions can cause fire or electric shock. Immediately turn the unit off and unplug the power cord, and contact your dealer for service.

When disconnecting the unit, grasp the plug instead of the cord. Pulling on a cord forcibly can damage it and cause fire or electric shock.

The unit should be used only with the power cord that is supplied by the manufacturer.

• (220–240 V equipment)

A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord is not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation

H05VV-F 3G 1.0 mm

2

).

Battery

Be sure to use the specified type of batteries only. Using incorrect type of batteries can burn or leak.

Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can burst or leak, resulting in spillage or injuries.

Be sure to take out batteries worn away from the unit. The battery worn away can leak.

Be sure that a battery should not be charged, shorted, heated, broken or thrown into fire. Using wrong can leak generate heat or burst.

Installation and Relocation

To prevent fire or shock hazard, do not expose this unit to rain or any type of moisture.

Power

CAUTION

Operating Safeguards

If metal fragments or water gets into the unit, turn the unit off and unplug the unit immediately. Contact your dealer for service.

Operating the contaminated unit can cause fire or electric shock.

Never open or remove unit covers that are screwed with screws unless specifically instructed in the “Operating Instructions”. A high-voltage component can cause electric shock.

Do not alter the unit or modify any parts.

Alteration or modification can cause fire or electric shock.

Keep the marker’s cap or battery out of reach of children to prevent swallowing.

When the unit is not used over an extended period of time, switch it Off and unplug it. If an unused unit is left connected to a power source for a long period, degraded insulation may cause electric shock, current leakage or fire.

Installation and Relocation

Do not position the unit in a location where it is unstable.

Do not place the unit in a hot humid or dusty environment.

Prolonged exposure to these adverse conditions may cause fire or electric shock.

When moving the unit, be sure to unplug the power cord from the AC outlet. If the unit is moved with the power cord attached, it can cause damage to the cord which could result in fire or electric shock.

9

10

For Your Safety

Do not install the unit except by a qualified service personnel.

After installing or moving the electronic board, lock the casters and set the fallprevention extension legs.

Locking the casters

(Push this side)

Push to lock

Operating Safeguards

If the unit is fallen down or damaged, turn the unit off and unplug the power cord.

Otherwise, it may cause fire or electric shock.

Do not put drinks, other liquids or heavy items on the tray or screen. Accidental spillage of liquid into the unit may cause severe damage. If this occurs, turn the unit off, unplug the power cord and contact your dealer for service.

Do not lean against the screen or on the cover (lower), even if the electronic board is mounted on the wall.

Battery

When the unit is not used over an extended period of time, take the batteries out of the unit. Otherwise, the batteries may leak. Do not use the leaked batteries.

For users in the United

Kingdom only

Safety Information

This appliance is supplied with a moulded three pin mains plug for your safety and convenience.

A 5 amp. fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amps. and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the

BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer.

If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safely.

There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp. socket.

If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician.

WARNING:

This appliance must be earthed.

IMPORTANT:

The wires in this mains lead are coloured in accordance with the following code.

Green-and-Yellow: Earth

Blue:

Brown:

Neutral

Live

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured

Green or Green-and-Yellow.

The wire which is coloured Blue must be connected to the terminal in the plug which is marked with the letter N or coloured Black.

The wire which is coloured Brown must be connected to the terminal in the plug which is marked with the letter L or coloured Red.

How to replace the fuse:

Open the fuse compartment with a screwdriver and replace the fuse.

Precautions

Precautions

Installation

Screen Film

Markers,

Erasers and

Thermal

Transfer Film

Power Cord and USB

Cable

•

Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or near air-conditioning vents as this may cause stretching and/or discoloration of the screen.

•

Do not install the unit in strong sunlight or strong lighting. Proper copying may become impossible.

•

Do not install the unit in locations where the temperature may change suddenly as this may disable the unit’s ability to make copies.

•

Make thick and dark lines inside the copying area.

Note that any writing inside the shaded area (on

25 mm (1 " )

right) cannot be copied.

•

Do not allow writing to remain on the screen for an extended period of time as it will become harder to

35 mm

Copying area

35 mm

erase.

•

Do not erase with an overly dirty eraser (see page

75).

•

Periodically wipe the screen film gently with a

(1

3

/

8

" )

25 mm (1 " )

(1

3

/

8

" )

water-dampened cloth that has been thoroughly wrung. (See page 75.)

•

Use a commercially available white board cleaner for hard-to-erase stains.

(SANFORD® EXPO® white board cleaner etc.)

•

Do not touch the screen, write with markers, or erase while the screen is moving as this may result in damage to the unit.

•

Do not attach chart paper to the screen film for copying as this may result in damage to the unit.

•

Use only the included or designated markers, erasers and thermal transfer film. (See page

82.)

Use of accessories other than those included or designated (such as oil-based markers) may damage the screen or result in hard-to-erase markings.

• Copy quality increases with the thickness of the drawn line. To ensure quality copies, please use the markers (big).

• The markers for interactive (small) draw thin lines. The quality of the copies may be reduced when these markers are used.

• Do not store the thermal transfer film in a location subject to extreme changes in temperature (such as near air conditioning or heating equipment) as this may cause condensation on the thermal transfer film and result in poor print quality and/or paper jams.

• Store markers horizontally as vertical storage may stop the ink from coming out.

• The length of one roll of designated thermal transfer film (Replacement film: UG-6001) is approximately 50 meters (164 ft.). One roll of thermal transfer film can make approximately

150 sheets of copies.

Note that the total number of copies may differ depending on the operating conditions.

Also note that the length of the thermal transfer film supplied with the unit is shorter than the replacement film roll and is only approximately 10 meters (32.8 ft.).

• When moving the unit, disconnect the power cord from the electrical power socket and from the printer’s power connector, and disconnect the USB cable from the printer’s USB connector and a computer. Then coil them for transportation as stepping on the power cord and USB cable or having them catch on something during movement may result in damage to the cord and cable.

• If you connect the electronic board to a USB hub, it is not guaranteed to work.

• Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.

11

12

Precautions

Replacing the Thermal

Transfer Film

Electronic

Pen and

Electronic

Eraser

• Dispose of the used thermal transfer film in a trash receptacle for burnable trash.

• A negative of the copied image will remain on the thermal transfer film. (To protect the security of your information, we recommend cutting up the used thermal transfer film with scissors or shredder before disposing of it.)

Transmitter

•

Do not cover the transmitter with your hand while using an interactive function as this may cause the position of the Electronic Pen or the Electronic Eraser not to be normally detected.

NG

OK

•

Press down firmly with the point of the Electronic Pen or the eraser cloth of the Electronic

Eraser on the screen film until you hear a buzzing sound, and then move it slowly.

However, do not press down the point of the Electronic Pen too much strongly as this may make a dent in the screen back panel.

•

Do not use two or more the Electronic Pens or the Electronic Eraser at the same time as this may cause the position of the Electronic Pen or the Electronic Eraser not to be normally detected.

•

For precise positioning, keep the Electronic Pen and Electronic Eraser perpendicularly to the screen during use.

•

Since ultrasonic is used to detect the position of the Electronic Pen and Electronic Eraser when they are being used, you may hear a buzzing sound, but this is not harmful to the human body or peripheral hardware. It will also not result in an electric shock.

Battery

Precautions

If batteries are used improperly, batteries may leak, causing corrosion of the unit, or they may burst. To prevent this, always follow the precautions given below.

• Always remove batteries from the Electronic Pen and Electronic Eraser if they are not to be used for an extended period of time.

• Use the same type of batteries. Do not mix different types.

• Do not mix old and new batteries.

• Always insert batteries with their polarity properly oriented as indicated on the Electronic

Pen or Electronic Eraser.

• If the Electronic Pen or Electronic Eraser ceases to function because batteries have run out, remove them immediately and dispose of them according to local regulations.

Leaving drained batteries in the Electronic Pen or Electronic Eraser may result in leakage.

• Do not disassemble batteries or place them in a fire.

• Do not short batteries.

• Alkaline batteries cannot be recharged. Never attempt to recharge alkaline batteries.

For Brasil

Após o uso as pilhas / baterias contidas neste produto poderão ser dispostas em lixo doméstico.

For Taiwan

( 台灣 )

Projector

•

Light from the projector may enter the eye when using a projector to project images for the purpose of making presentations and so on. Be very careful as direct projector light may hurt the eyes.

13

14

Precautions

CD-ROM

To prevent the CD-ROMs from accidental damages:

Do not touch or write on the surface of the disc.

Do not leave the disc out of the protective case.

Do not leave the disc in direct sunlight or near heat sources.

Do not place heavy objects on the disc case or drop the case.

To clean the disc, hold the disc by its edges and wipe it from the center to the edges with a dry, soft cloth.

Part Names and Functions

Electronic Pen /

Electronic Eraser

Position Receiver

Printer


Scanner

Electronic Pen /


Position Receiver

Screen

Tray

Output Port

This port holds up to 10 sheets of output paper.

Printer Open Lever

Push down this lever to open the printer door.

USB Connector

(See page 27.)

Paper Cover

Open this cover to load copy paper.

Control Panel

(See page 16 for

details.)

Power Switch

ON

OFF

Cord Holder

Power Cord

AC Inlet

Printer Door

Open this door to load a thermal transfer film or to remove jammed paper.

(See pages 18, 22, 23.)

15

16


l

Control Panel

Contrast/Remaining Film

Indicator

Advance Key

Copy Key

Panel

Contrast Key

2-Screen Copy Key

Multi-Copy/Stop Key

Multi-Copy/Error Indicator

Name

Contrast/

Remaining

Film

Indicator

Description

This lamp indicator notifies the user when the time to replace the thermal transfer film is approaching (estimated) and of the printing contrast used during copying.

Indicator off:

Indicator on:

Indicator flashing*:

Normal printing contrast

Darker than normal printing contrast

Almost time to replace the thermal transfer film

(Note that only about 15 more sheets may be copied when this indicator starts flashing.)

Replacement film (UG-6001) is separately available from the dealer where you purchased your unit.

* The flashing indicator will go out after the power is turned off, or the printer has been opened and closed. (When copying is performed, this indicator will begin flashing again.)

Each time this key is pressed, the unit will alternate between normal and dark contrast modes (Normal/Dark).

Contrast

Key

2-Screen

Copy Key

Multi-Copy/

Error

Indicator

Multi-Copy/

Stop Key

This key causes the front and back of the screen to be copied on a single sheet of paper.

This indicator displays the number of copies to be made. The display changes each time the Multi-Copy/Stop Key is pressed.

Example: 1 → 2 → ··· → 9 → 1 → ···

When an error occurred, a flashing symbol will appear on this display to

indicate the error status. (See page 80.)

When making multiple copies, press this key until the desired number of copies is displayed on the Multi-Copy/Error Indicator.

This key can also be pressed to stop copying while executing multiple copies.

• The display changes as shown below each time the screen is copied. After reaching 0, the display will reset to 1.

Example for multiple copies:

5 → 4 → 3 → 2 → 1 → 0 → 1 (Number is counted down.)

Copy Key

This key causes the screen to be copied.

Advance

Key

Pressing this key advances the screen from right to left.


Electronic Pen and Eraser

■

Electronic Pen (see page 25)

Pen button*

Pen holder lever

* When using the projector mode to operate the computer screen on the Interactive Panaboard screen and operating the pen while holding down the pen button achieves the same function as pressing the right mouse button.

■

Electronic Eraser (see page 26)

Eraser cover

Eraser cloth

17

18

Installing the Thermal Transfer Film

Installing the Thermal

Transfer Film

Install the thermal transfer film in the printer.

1

Set the power switch to on (

I

).

• “ ” will flash on the Multi-Copy/Error

Indicator when the thermal transfer film has run out.

• The screen will move to home position and stop.

2) Insert the blue shaft into the front left hole.

Blue shaft

ON

OFF

2

Push down the printer open lever and open the printer door.

3) Place the blue gear on the front right groove.

Blue gear

4) Place the white shaft on both sides of the back grooves.

Printer door

3

Install the thermal transfer film.

1) Set the thermal transfer film, with the blue gear in front, on the right.

White shaft

Blue gear

4

Tighten the film, then close the printer door.

1) Rotate the blue gear in the direction of the arrow to take up the slack on the film.

Blue gear

•

If a slack remains, perform step 3-2) through

4-1) again.

2) Securely close the printer door by using both hands until a click is heard.

•

“ ” flashing on the Multi-Copy/Error

Indicator will go out.

Latches

Note

•

If “ ” is still flashing after closing the printer door, make sure that the thermal transfer film has been installed properly and tightened.

•

The printer door should be closed to make copies properly. Confirm both latches are locked.

Loading Copy Paper


It is possible to load up to 40 sheets of A4 (Letter*) size copy paper [assuming a paper weight of 80 g /m

2

(20 lb.)].

Note that only A4 (Letter*) size paper may be used.

When the unit is first used or when “ ” flashes on the

Multi-Copy/Error Indicator to indicate that the unit is out of paper, load copy paper as described below.

* Letter size is for U.S.A. and Canada models.

Notes on Loading Copy Paper

Follow the guidelines below to ensure smooth and accurate printing by the unit.

•

Only use A4 (Letter) size copy paper having a weight of 60 g /m

2

(16 lb.) to 90 g /m

2

(24 lb.) as the copy paper for this unit.

•

Do not simultaneously load paper of varying type and thickness as this may result in paper jams.

•

Before adding copy paper, be sure to remove all the copy paper remaining inside the unit’s paper cover.

(Note that copy paper will slightly resist being removed, but may be pulled out without problems.)

After removing the copy paper, stack the removed paper together with the new paper, fan it thoroughly, square it and reload.

DO NOT USE THE FOLLOWING TYPES

OF PAPER

•

Extremely smooth or glossy paper

•

Coated paper

•

Thermal paper

•

Paper that is printed on one side

•

Wrinkled paper, creased paper, etc.

1


I

).

•

“ ” will flash on the Multi-Copy/Error

Indicator when copy paper has run out.

•

The screen will move to home position and stop.

ON

OFF

19


2

Pull the paper cover forward as shown in the figure.

4

Close the paper cover until a click is heard.

3

To prevent paper jams such as those caused by multiple sheets feeding at once, fan the paper thoroughly, square it, align it with the guide inside, and insert as far as it will go.

Note

• Close the paper cover, or the unit will not work properly.

• The paper cover should be closed to make copies properly. Confirm the both latches are locked.

20

Guide

Maximum paper limit

Note

•

Only use A4 (Letter*) size copying paper having a weight of 60 g /m

2

(16 lb.) to 90 g /m

2

(24 lb.) as the copy paper for this unit.

* Letter size is for U.S.A and Canada models.

•

Do not stack more copy paper in the unit than the maximum paper limit indicated by the guide (see the above figure) as this may result in paper jams. [Note that the unit can hold about 40 sheets of paper having a weight of 80 g /m

2

(20 lb.).]

Making Copies

This section describes how to copy text and illustrations drawn on the screen.

1


I

).

•

“ ” will light on the Multi-Copy/Error

Indicator to indicate that the unit is ready to copy.

•

The screen will move to home position and stop.

ON

OFF

2

Press the (Copy Key).

• Text and illustrations on the screen will be copied and copies emerge from the output port.

• The output port can hold up to 10 sheets of copy paper. (Note that exceeding the output port’s capacity may result in paper jams.)

• For details on making multiple copies and so

on, refer to “Copy Types and Procedures” on

this page.

Making Copies

Note

•

Do not use paper that has been copied on one side by this printer as copy paper in this unit or in any other copiers or printers as this may result in dirty rollers, degradation of printing quality, paper jams, and streaks and smudges on output paper.

•

Copy quality increases with the thickness of the drawn line. To ensure quality copies, please use the markers (big).

•

The markers for interactive (small) draw thin lines. The quality of the copies may be reduced when these markers are used.

•

Do not write on the back side of the output paper from this unit. The printed ink may be transferred underneath the paper.

•

Text or images in shades of yellow will not copy.

Copy Types and Procedures

[A] Copying the front of the screen

1) Press .

[B] Copying the back of the screen

1) Press to the front.

to move the screen to be copied

2) Press .

[C] Making multiple copies (up to 9)

1) Select the number of copies (1 to 9) by

2) Press .

• Press to stop copying in mid-operation.

[D] Making 2-screen copies

Copying the front and back of the screen on a single sheet of paper

1) Press .

21

Replacing the Thermal Transfer Film

Replacing the Thermal

Transfer Film

The unit is capable of producing about 15 more copies when the Contrast/Remaining Film Indicator begins to flash. The unit has run out of thermal transfer film and can no longer make copies when the Multi-Copy/Error

Indicator flashes “ ”. Separately available replacement film (UG-6001) may be purchased from the dealer where you purchased the unit. Thermal transfer film is replaced as follows.

Notes on Replacing Thermal

Transfer Film

•

Only use the designated product (UG-6001) from

Panasonic as the replacement film. (Note that using another type of replacement film may result in degraded printing quality or damage to the unit.)

• Thermal transfer film is disposable. Dispose of used thermal transfer film as

“

burnable

”

or

“

nonrecyclable

”

rubbish.

• A negative of the copied image will remain on the thermal transfer film. To protect the security of your information, we recommend cutting up the used thermal transfer film with scissors or shredder before disposing of it.

1

Push down the printer open lever to open the printer door, and remove the used film.

Note

•


•


22

2

Refer to steps 3 and 4 in the section of

“Installing the Thermal Transfer Film” on page

18.

Paper Jams

Remove paper jams by the following procedure when copy paper does not come out of the output port or when

“ ”

flashes on the Multi-Copy/Error Indicator.

1

Push down the printer open lever to open the printer door.

2

Remove the thermal transfer film with both hands.

Paper Jams

4

Install the thermal transfer film.

• Refer to steps 3 and 4 in the section of

“Installing the Thermal Transfer Film” on page 18.

• “ ” flashing on the Multi-Copy/Error

Indicator will go out.

Note

•


•


If the flashing

“ ”

does not go out after the foregoing procedure has been performed; this may indicate that the paper feeder is not functioning properly.

Reload the copy paper by following the steps given below.

1

Turn the power off.

ON

OFF

2

Open the paper cover and remove all the copy paper remaining inside the unit’s paper cover.

3

Remove the jammed paper.

Jammed paper

Note

•

The copy paper will slightly resist being removed, but may be pulled out without problems.

23

Paper Jams

3

To prevent paper jams such as those caused by multiple sheets feeding at once, fan the paper thoroughly, square it, align it with the guide inside, and insert as far as it will go.

5

Turn the power on.

• “ ” will light on the Multi-Copy/Error Indicator to indicate that the unit is ready to copy.

• The screen will move to home position and stop.

ON

OFF

Guide

Maximum paper limit

Note

• Do not stack more copy paper in the unit than the maximum paper limit indicated by the guide (see figure) as this may result in paper jams. [Note that the unit can hold about 40 sheets of paper having a weight of

80 g

/m 2 (20 lb.).]

4

Close the paper cover until a click is heard.

24

Note

•

Close the paper cover, or the unit will not work properly.

•

The paper cover should be closed to make copies properly. Confirm the both latches are locked.

Setting the Electronic

Pen and Eraser

Setting the Electronic Pen

1

Remove the battery cover on the pen holder, insert the batteries as shown in the figure, and re-attach the battery cover.

•

Always use “LR03 (AAA size)” (alkaline) batteries and be sure that their polarity is properly oriented.

•

Do not mix old and new, different type batteries when replacing batteries.

Battery cover

Setting the Electronic Pen and Eraser

3

Rotate the pen holder lever to the release position, insert the marker for interactive, and then return the pen holder lever to the lock position.

• Lock the pen holder lever while inserting the marker all the way into the pen holder until you hear a buzzing sound.

Detection of the marker color may not work well unless the marker is inserted fully into the pen holder.

• Do not set the marker near the Interactive

Panaboard while using the interactive function as this may appear unnecessary streaks not written on the computer screen.

Marker for interactive

2

Inserting

3

Locking

1

Releasing

2

3

Pen holder

1

Pen holder lever

2

Remove the temporal cap, and set the cap and adaptor to the marker for interactive.

•

Securely push the adaptor into the marker for interactive as far as it will go.

•

Do not remove the color identification cap on the back end of the marker.

Remove the temporal cap.

Marker for interactive

Color identification cap

1

Cap

Adaptor

3

2

2 - 3 mm

(

1

/

16

" -

2

/

16

")

Note

•

Press down firmly with the point of the

Electronic Pen on the screen film until you hear a buzzing sound.

•

For precise positioning, keep the Electronic

Pen perpendicularly to the screen during use.

Inclined pen angle will cause the shift of position.

25

26

Setting the Electronic Pen and Eraser

Setting the Electronic Eraser

1

Remove the eraser cover, insert the batteries as shown in the figure, and re-attach the eraser cover.

•

Always use “LR03 (AAA size)” (alkaline) batteries and be sure that their polarity is properly oriented.

•

Do not mix old and new, different type batteries when replacing batteries.

Replacing the Eraser Cloth

1

Remove the eraser cloth by pushing through the hole in the Electronic Eraser.

Press

Hole

Eraser cloth

2

Attach a new eraser cloth by pressing around the edge.

4

2

Eraser cover

3

New eraser cloth

1

Electronic eraser

Note

• Press down firmly with the eraser cloth of the

Electronic Eraser on the screen film until you hear a buzzing sound.

Installing Drivers and

Software

Drivers and software must be installed in your computer to use the interactive function, printer and

TWAIN driver.

For the information of the interactive function and

Panasonic-DMS, refer to “Features” on page 4.

System Requirements

Computer

CPU

Interface

OS

Memory

HD

IBM PC/AT or compatible machine with a CD-ROM drive

Pentium® II or higher processor

USB 2.0 or USB 1.1* 1

Windows® 98* 2 / Windows Me* 3 /

Windows 2000* 4 / Windows XP* 5

64 MB or more (Windows 98 /

Windows Me)

128 MB or more (Windows 2000)

256 MB or more (Windows XP)

At least 100 MB free space (except saving space for data files)

* 1

* 2

* 3

* 4

* 5

This electronic board does not function with Hi-Speed

USB 2.0. Even if using a computer equipped with Hi-

Speed USB 2.0, this electronic board functions with

Full Speed USB 2.0.

Microsoft



Windows



98 operating system

(hereafter Windows 98)

Microsoft



Windows



Millennium Edition operating system (hereafter Windows Me)

Microsoft



Windows



2000 operating system

(hereafter Windows 2000)

Microsoft



Windows



XP operating system

(hereafter Windows XP)

Installing Drivers and Software

Contents of CD-ROM

The provided CD-ROM includes the following.

•

USB driver

•

Printer driver

The printer driver allows the printer to print documents from your computer.

•

TWAIN driver

•

Panasonic-DMS software

Panasonic Document Management System

(Panasonic-DMS) uses the TWAIN driver to scan images drawn on the screen. The Panasonic-

DMS has a capability of managing documents

(image files).

•

Interactive Panaboard Software

In order to use the interactive functions, it is necessary to install the Interactive Panaboard

Software. The software cannot be used with the

TWAIN driver.

•

Panasonic-DMS manual

•

Interactive Panaboard operating instructions

Notes when connecting the electronic board to a computer

•

First install the USB, printer and TWAIN driver to your computer, then connect the electronic board

to the computer (refer to “Installing Drivers /

Interactive Panaboard Software”).

•

If you connect the electronic board to a USB hub, it is not guaranteed to work.

•

Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.

•

Use the USB cable provided with the unit.

27

28


Installing Drivers / Interactive

Panaboard Software

The USB, printer, TWAIN driver and Interactive

Panaboard Software are installed in your computer by following procedures.

Note

•

Do not yet connect a USB cable to the electronic board.

1

Power on your computer and start Windows* 1 .

•

Log on as an administrator for

Windows 2000 or Windows XP.

*

1

Microsoft



Windows



operating system

(hereafter Windows)

2

Insert the CD-ROM into the CD-ROM drive.

The Setup window appears automatically.

•

Depending on the operating system or the settings that you are using, the Setup window may not appear automatically.

In such a case, execute “Menu.exe” in the

CD-ROM from the Explorer.

3

When “

Welcome

” window appears, click

[Next]

.

4

Click

[Interactive Panaboard Setup]

.

• To install the Panasonic-DMS software, click

[Panasonic-DMS]

(see page 30).

•

To read the operating instructions in the provided CD-ROM, the Adobe Reader or

Acrobat Reader must be installed in your computer. It can be downloaded from the

Adobe's Web site if Internet is available.

5

Click

[Install Software]

.

6

Read ”End-User License Agreement” carefully and click

[Yes]

.

7

When the following window appears, check that the electronic board is not connected to your computer and click

[OK]

.

•

If the USB cable is connected to the electronic board, remove it and click

[OK]

.

•

For Windows 98 or Windows Me, a floppy disk or CD-ROM for installing the operating system may be required

.

•

If the screen prompts to restart Windows, restart Windows.

8

When the following window appears after files are copied, power the electronic board on, and connect the USB cable provided from the electronic board to your computer.


Note

• If the electronic board is powered on with connecting the USB cable when the installation is completed and

[Exit]

is clicked in the setup window, the Interactive

Panaboard Software is automatically started in Windows 2000 / Windows XP.

(For the detailed information, refer to

“Starting the Interactive Panaboard

Software” on page 33.)

9

Follow the on-screen instructions if the wizard windows appear.

•

If the wizard window is displayed to select the file (##.inf) for the printer driver in

Windows XP, select “windows\inf\oem##.inf”.

•

If the wizard window is displayed to connect to the Windows Update in Windows XP SP2, select

[No]

.

•

If the warning window is displayed in

Windows 2000 / Windows XP, select

[Yes]

or

[Continue Anyway]

to continue the installation.

•

The new hardware wizard windows may be displayed several times depending on the operating system.

•

For Windows 98 or Windows Me, a floppy disk or CD-ROM for installing the operating system may be required

.

10

When the installation is completed, click

[OK]

.

•

Interactive Panaboard

group is registered in the

Panasonic

of the

Programs

menu.

•

The following is installed in the

Interactive

Panaboard

group.

- Interactive Panaboard (application)

- Interactive Panaboard Help

- Interactive Panaboard Uninstall

- Operating Instructions

29

30


Installing the Panasonic-DMS

Software

When Panasonic-DMS is already installed, leave it

(

do not uninstall it

) and install the new software in the same folder to overwrite it.

1

Power on your computer and start Windows.

•



2

Insert the CD-ROM into the CD-ROM drive.

The Setup window appears automatically.

• Depending on the operating system or the settings that you are using, the Setup window may not appear automatically.

In such a case, double-click “Menu.exe” in the CD-ROM from the Explorer.

3

When

“Welcome”

window appears, click

[Next]

.

4

Click

[Panasonic-DMS]

.

•

To install the USB, printer, TWAIN driver and

Panasonic Interactive Software, click

[Interactive Panaboard Setup]

(see page

28).

• To read the operating instructions in the provided CD-ROM, the Adobe Reader or

Acrobat Reader must be installed in your computer. It can be downloaded from the

Adobe's Web site if Internet is available.

5

Click

[Install Panasonic-DMS Software]

.

6

Click

[Install]

.

• To install the Panasonic-DMS Manual, check the

[Operating Instructions]

check box.

7

Read “End-User License Agreement” carefully and click

[Yes]

.

8

Follow the on-screen instructions when messages appear.

9

When the setup process is completed, restart

Windows.

• About the Panasonic-DMS, refer to the

Document Management System operating instructions in the CD-ROM.

Removing Drivers /


Software

If you need to remove the USB driver, printer driver,

TWAIN driver and Interactive Panaboard Software, perform the following steps.

1


• Log on as an administrator for


2

Click

[Start]

, and then click

Control Panel

in

Settings

.

•

For Windows XP, click

[start]

, and then click

Control Panel

.

3

Double-click

Add / Remove Programs

icon

(Windows XP:

Add or Remove Programs

) in the

Control Panel

.

4

Select

Panaboard UB-8 Software

in the

Add

/ Remove Programs

list, and click

[Add /

Remove]

.

5

Follows the instructions on the screen.

6

After uninstalling, restart your computer.


Removing the Panasonic-

DMS Software

If you need to remove the Panasonic-DMS software, perform the following steps.

1


•



2

Click

[Start]

, move the pointer to

Programs

–

Panasonic

–

Panasonic Document

Management System

–

Uninstall

.

(For Windows XP,

All Programs

instead of

Programs

.)

3

Click

[OK]

.

4

After uninstalling, restart your computer.

31

Using the Panaboard in Projector Mode


Precautions When Using a Projector

Interactive upper limt mark

Position receiver

50 mm (2")

Position receiver

100 mm

(3

15

/

16

" )

35 mm

(1

3

/

8

" )

Interactive upper limt mark

100 mm (3

15

/

16

" )

35 mm (1

3

/

8

" )

Screen film

Projector

32

* Do not use the shaded area.

• When using a projector to project images, be sure to display the image so that it is centered left-to-right on the

Interactive Panaboard screen and with at least a 50 mm (2”) gap between the top of the image and the screen border. Note that the Electronic Pen does not always operate properly when within 50 mm (2”) of the top of the screen, 100 mm (3 15 /

16

”) of the position receiver and 35 mm (1 3 /

8

”) from the both sides of the screen.

• Since the Electronic Pen position may shift if the image on the screen is trapezoid, adjust the projector so that the image on the screen is rectangular.

• When projecting an image on the Interactive Panaboard using a projector, the image on the screen may become difficult to see depending on the viewing angle and position due to reflected projector light. If this happens, adjust the location of the projector or change your viewing position.

• When using a projector to project a computer screen, be sure to use optimum resolution settings for the projector and the computer. The image may be difficult to see if optimum settings are not used. Fine lines in the image on the Interactive Panaboard screen may appear broken particularly if the projector resolution is lower than the computer resolution.

• When using a projector to project images, the Electronic Pen position may shift if the projection position shifts due to the following causes. If this happens, it becomes necessary to perform calibration to reposition the projected

image on the screen. (For details on calibration, see page 33.)

- When the installed location of the projector is changed.

- When the position of the Interactive Panaboard is changed.

- When the projection area and position has changed due to using a projector function such as zoom.

- When the display resolution of the projector or computer has changed.

Note that the position of an Interactive Panaboard attached to a stand may shift if it is struck carelessly.

Always make sure the stand's casters are locked in place.

• Light from the projector may enter the eye when using a projector to project images for the purpose of making presentations and so on. Be very careful as direct projector light may hurt the eyes.

Starting the Interactive


1

Turn on the Interactive Panaboard.

2

Turn on your computer and start up Windows.

3

For Windows 2000 / Windows XP

Connect the USB cable provided from the electronic board to the computer.

• The Interactive Panaboard Software is automatically started.

For WIndows 98 / Windows Me

Click

[Start]

and select

Programs

-

Panasonic

-


-


.

• The window appears to show the Interactive

Panaboard is detected.

Note

•

If the Panaboard Operation Panel is displayed using the Panasonic-DMS, the

Panasonic Interactive Software cannot be started. Close the Panaboard Operation

Panel and start it. Refer to page 72.

•

To change the setting so the Interactive

Panaboard Software is not started automatically when connecting the USB cable, perfrom the following.

(1) Connect the USB cable provided from the electronic board to the computer.

(2) Click

[Start]

and select

Settings

-

Control Panel

, then double-click

Scanners and Cameras

icon.

(For Windows XP, click

[start]

and select

Control Panel

)

(3) Double-click

Panaboard-UB8 USB

Device Driver

icon and click the

Disable device events

check box in the

Events

tab. Click

[OK]

.

To start the Interactive Panaboard Software, click

[Start]

and select

Programs

-

Panasonic

-


-


.

(For Windows® XP,

All Programs

instead of

Programs

)

4

Click

[OK]

.

•

The Select Mode window appears.


5

Click

Projector

icon and click

[OK]

.

• The calibration start screen is displayed.

• If the Interactive Panaboard and projector are fixed not to move, then the calibration has been performed, it enables to skip the following calibration step by checking the

Use the last Calibration setting

check box.

If the Desktop resolution is different from the setting when the calibration was executed before, Interactive Panaboard Software will not function properly. In that case, calibrate from the pop-up menu of the Taskbar. (See

page 34.)

6

To calibrate the position of the computer screen, press the center of each corner for about two seconds in the following order with the Electronic Pen.

1

2

4

3

•

When a position ended correctly, then the next position starts automatically.

•

When the calibration ended correctly, the message is displayed to notify it.

33

34


• When the calibration is completed and the Projector mode become active, the icon

will be registered in the

Taskbar and the Desktop

Drawing Tool will appear automatically.

■

Exiting the Interactive Panaboard

Software

Right-click the icon in the pop-up menu.

in the Taskbar and click

Exit

[Desktop Drawing Tool]

Note

•

If the Interactive Panaboard is not detected, the following notification window appears.

In this case, check the status of the

Interactive Panaboard and confirm that the

USB cable is connected. For details on the settings of the communications port, refer to

“Setting the Communication Port” on page

35.

• If the Interactive Panaboard Software is used without connecting the Interactive

Panaboard, click

[Offline]

in the notification window. In the off-line state, a file recorded in

Projector mode can be played back and edited.

• The tool tip text displayed when the mouse is located over the icon in the Taskbar allows you to determine the current mode.

- Projector mode: “Interactive Panaboard

(Projector)”

- Whiteboard mode: “Interactive Panaboard

(Whiteboard)”

Pop-up Menu Configuration

Right-click the icon pop-up menu.

in the Taskbar to display the

Following operations are possible in the pop-up menu.

Select Mode...

: (see page 35)

Switches the mode; Projector mode or

Whiteboard mode.

Calibrate

: (see page 33)

Executes the calibration.

Tool

: (see page 40)

Draw

:

Displays the Desktop Drawing Tool (see page

40).

On-Screen Keyboard

:

Displays the On-Screen Keyboard (see page

43).

View Window

:

Displays the View Window (see page 39).

Settings

:

Communication Port...

:

Help Topics...

:

Displays the help of the Interactive Panaboard

Software.

About...

:

Displays the Interactive Panaboard Software version information.

Exit

:

Sets the communication port (see page 35).

Adjustment...

:

Adjusts the position of the Electronic Pen or

Electronic Eraser to improve the shifted

position (see page 36).

Options...

:

Sets the option of the Interactive Panaboard

Software (see page 36).

Exits the Interactive Panaboard Software.

■

Switching the Mode

You can freely switch the Projector mode and the

Whiteboard mode while the Interactive Panaboard

Software is running.

1

Right-click the icon in the Taskbar and click

Select Mode...

in the pop-up menu. In addition, you can double-click the icon in the

Taskbar.

•


2

Click

Projector

or

Whiteboard

icon, and then click

[OK]

.


2

Click

[Start...]

of the

Auto Detection

to detect the communication port connected with the

Interactive Panaboard automatically.

3

Click

[OK]

.

Note

•

The

COM Port

can be selected for older models of the Interactive Panaboard without

USB port.

Note

• When switching to the Projector mode, the calibration screen will not be displayed automatically after calibration ended correctly once. Calibrate if necessary.

• When switching to the Whiteboard mode, the

Whiteboard window will be displayed.

■

Setting the Communication Port

Specifies the communication port to communicate with the Interactive Panaboard.

1


Settings

-


in the pop-up menu.

• The Communication Port window appears.

35


■

Adjusting the Shifted Position

The Electronic Pen or Electronic Eraser position may largely shift by the using environment. In this case, adjust the position according to the following procedures to improve the shifted position.

1


Settings

-

Adjustment...

in the pop-up menu.

• The Adjustment window appears.

2

Place the Electronic Pen at the center of the

Interactive Panaboard screen and drag slowly the Electronic Pen downward about 100mm (4”).

•

When the adjustment is finished, the adjustment end message will be displayed in the Adjustment window and

[Cancel]

will be changed into

[OK]

.

■

Setting Options

Specifies the option of the Interactive Panaboard

Software.

1


Settings

-

Options...

in the pop-up menu.

• The Options window appears.

2

The following options can be set.

36

3

Click

[OK]

.

Note

• For precise adjusting, keep the Electronic

Pen perpendicularly to the Interactive

Panaboard screen during the adjustment.

Inclined pen angle will cause the shift of position.

• To cancel the adjustment, click

[Cancel]

by a mouse of the computer.

•

Show Desktop Drawing Tool when

Projector Mode starts

:

The Desktop Drawing Tool is automatically displayed after the Projector mode starts by checking the check box.

•

Print out image automatically rotates to fit printer paper direction

:

The printing image automatically rotates to fit the direction of paper set in the printer of the

Interactive Panaboard by checking the check box.

•

Original Keyboard

:

The original keyboard of the Interactive

Panaboard Software is used as the virtual

keyboard. (See page 43.)

•

Windows Keyboard

:

The On-Screen Keyboard provided with

Windows is used as the virtual keyboard.

(See page 43.)

* The Windows Keyboard can be used only with Windows Me, Windows 2000 or

Windows XP.

•

JPEG

:

Sets the quality level when exporting a page as a JPEG format image file. The larger number will get higher quality for the image file than small number when exporting.

However, the file size will be large.

•

TIFF

:

When exporting a page as a TIFF format, an image file is compressed by checking the

Compression (PACKBITS)

check box.

•

Save file automatically, named with the date

:

The image file will be saved automatically as a file named with the date of capture by checking the check box.

•

Save Folder

:

Sets the default folder when saving image files.

•

File Format

:

Sets the default format when saving image files.

•

Display save verification dialog box

:

Displays a dialog box to verify the image file name by checking the check box.

•

(Method 1) Draw strokes and record after verifying the background image

:

After the background image is decided, drawing with the marker and eraser are recorded as an IPB document.

•

(Method 2) Record strokes and background image together

:

Records the background image as an IPB document at the same time as drawing with the marker and eraser.

•

Desktop Drawing Tool: Drawing Data File

:

Specifies the folder to save the drawing data if drawing data files for PowerPoint®* 1 Slide

Show is saved other than the folder of the

PowerPoint file.

* 1 Microsoft® PowerPoint® presentation graphics program (hereafter PowerPoint)

3

Click

[OK]

.


Basic Operation in Projector

Mode

This section explains the basic operations when using the Interactive Panaboard Software in Projector mode. We recommend trying the operations in accordance with the following steps to help you completely understand the operations in Projector mode.

• For any explanations on the operations of the

Projector mode, the Electronic Pen will be referred to as “Mouse” and the projected computer screen on the Interactive Panaboard will be referred to as

“Desktop”.

Step1: Using the Electronic Pen as a mouse

To start the Interactive Panaboard Software, see page 33.

1

If the Desktop Drawing Tool is not displayed, right-click the icon in the Taskbar and click

Tool

-

Draw

to display the Desktop

Drawing Tool.

2

To use the Electronic Pen as a mouse, click

(Arrow) in the Desktop Drawing Tool.

• In Projector mode, use the Electronic Pen

with its cap on

.

Operations of “click” and “drag” are as follows.

Single click

:

Press the projected screen with the tip of the

Electronic Pen.

Double-click

:

Double-click is executed by performing two quick clicks at the same position with the tip of the Electronic Pen.

Drag

:

While pressing the desired image with the tip of the Electronic Pen, drag the image to its new position.

Right-click

:

While pressing the button of the Electronic

Pen, press the projected screen with the tip of the Electronic Pen and release. (Do not release the button of the Electronic Pen before all of these operations are finished.)

For more details about the Desktop Drawing

Tools, refer to “Using the Desktop Drawing

Tool” on page 40.

37

38


Note

•

If you move the projector or Interactive

Panaboard, the position of the computer screen projected onto the Interactive

Panaboard screen will be moved. This will result in out of position of the Electronic Pen.

If this happens, you will need to calibrate the unit again by executing

Calibrate

in the popup menu from the Toolbar.

•

In the Projector mode, use the Electronic

Pen

with its cap on

.

•

Do not cover the position receiver with your hand as this may cause interactive function to stop functioning.

•

Press down firmly with the point of the

Electronic Pen on the screen film until you hear a buzzing sound.

•

For precise positioning, keep the Electronic

Pen perpendicularly to the Interactive

Panaboard screen during use. Inclined pen angle will cause the shift of position.

•

If double-click does not work properly, confirm that the same position is accurately clicked twice. When the position is different, it is not recognized a double-click. Or, try different timing of depressing and releasing of the Electronic Pen. This operation is also depending on the setting of the double-click speed in “Mouse” of the Windows “Control

Panel”.

Step 2: Drawing and erasing lines on the Desktop

1

Click either (Black, Red, Blue or Green

Marker) in the Desktop Drawing Tool to draw handwritten lines.

• The shape of the mouse cursor changes to

.

2

Position the mouse pointer where you want to draw a handwritten line on the Desktop and drag the Mouse.

3

Click (Eraser) in the Desktop Drawing

Tool to erase the handwritten line.

• The shape of the mouse cursor changes to

.

4

Drag the Mouse to the area on the Desktop to be erased.

Note

•

The width and color of the markers and the size of the eraser can be changed. (See

page 41.)

•

To disappear the Desktop Drawing Tool, select a marker or eraser and press the projected screen with the Electronic Pen while pressing the pen button.

To display the Desktop Drawing Tool again, locate the Electronic Pen at the desired place on the projected screen and press the projected screen with the Electronic Pen while pressing the pen button.

•

The Desktop (projected image) can be printed by pressing the (Copy Key) on the Interactive Panaboard.

Step 3: Recording image and lines data on the Desktop

Data of lines drawn or erased on the Desktop using the Desktop Drawing Tool can be recorded in

Interactive Panaboard format files (extension “.ipb”, referred to as IPB documents).

There are two methods to record drawings. To select

the recording method, refer to “Setting Options” on page 36.

The following is

(Method 2) Record strokes and background image together

. For more details on

recording methods, refer to “Recording Drawing Data in IPB Document” on page 47.

1

Draw lines with markers and eraser.

2

Click (REC Start) in the Desktop Drawing

Tool.

• The image to be recorded will be displayed in a window.

3

Click

[Record]

or

[Record & Erase drawings]

to record the drawings.

• Clicking

[Record]

will record the drawings and leave them.

• Clicking


will record the drawings and erase them.

• Clicking

[Cancel]

will cancel recording.

4

Click (REC Stop) in the Desktop Drawing

Tool.

• The Save As window appears.

5

Enter the name of the folder where you want to save the file.

• The extension of the file is “.ipb”.

6

Click

[Save]

.

Note

•

Do not change the Desktop resolution while recording data. If changed, the Desktop image will not be displayed properly when it is displayed in the View window.

•

To record more than one page, refer to

“Recording Drawing Data in IPB Document” on page 47.


Step 4: Displaying the recorded data with View window

Desktop background data and drawings stored using the Desktop Drawing Tool can be displayed in the

View window as well as browsed, played back and edited.

1

If the View window is not displayed, right-click the icon in the Taskbar and click

Tool

-

View Window

to display the View window.

2

Click

Open...

in the

File

menu.

• The Open window appears.

3

Enter the folder to look in and the file name you want to open.

• The file has an “.ipb” extension.

4

Click

[Open]

.

Note:

•

Many different operations can be executed in the displayed IPB document.

- Saving the IPB document in another file

format. (See page 57.)

- Switching a page of the IPB document.

(See page 61.)

- Editing a page of the IPB document. (See

page 61.)

- Playing back the IPB document. (See page

63.)

- Recognizing Handwriting in the IPB

document. (See page 64.)

- Printing the IPB document. (See page 66.)

39


40

Using the Desktop Drawing

Tool

The Desktop Drawing Tool is a tool for drawing, erasing, recording, etc. on the

Desktop.


Tool

-

Draw

in the pop-up menu. The Desktop Drawing Tool will appear and check mark is placed next to the

Draw

menu. Clicking

Draw

again will delete the check mark and disappear the Desktop Drawing Tool.

The Desktop Drawing Tool is always displayed at the front of the Desktop.

From this Desktop Drawing Tool, the tools can be selected for drawing or erasing lines.

The data drawn on the Desktop can be stored into the IPB document together with the desktop image. They can be displayed or edited by the View window.

Desktop Drawing Tool consists of the following tools.

Tool Description

Arrow

Black

Marker

Uses the Electronic Pen as the mouse

By dragging the mouse, black line can be drawn.

Red Marker By dragging the mouse, red line can be drawn.

Blue Marker By dragging the mouse, blue line can be drawn.

Green

Marker

By dragging the mouse, green line can be drawn.

Eraser By dragging the mouse, lines can be erased.

Undo

Redo

Restores the drawing lines line by line.

Cancels the undo.

Setting

All Clear

Capture

Print

Changes the width, color of the markers and size of the eraser.

Clears all drawn lines.

Takes the Desktop image as an image file.

Prints out the Desktop image.

Tool

On-Screen

Keyboard

(Handwriting

Tablet)

PowerPoint

Slide Show

Next

Previous

White

Background

Refresh

REC Start

REC Stop

Page No.

New Page or

REC Page

Shrinking

Expansion

Description

Displays the On-Screen

Keyboard / Handwriting Tablet or clears its display.

Plays or quits the PowerPoint

Slide Show.

Performs the same operation as “Next” in a PowerPoint

Slide Show.

Performs the same operation as “Previous” in a PowerPoint

Slide Show.

Changes the background of the Desktop to the whiteboard.

Clicking once again will release the Whiteboard status.

All of the drawn lines on the

Desktop are refreshed.

Recording of drawings is started or the first page is recorded depending on the recording method.

Stops recording and stores the recording data.

Displays the page number which is being recorded.

The initial number is (0).

When the (REC Start) icon is clicked, it is changed to

(1), and following pages will be numbered accordingly.

Saves the current page and starts recording process for the next page.

or

Records the second or subsequent page.

Shrinks the Desktop Drawing

Tool.

Expands the Desktop Drawing

Tool.

Note

•

When the Desktop Drawing Tool is closed, the drawings are erased.

•

(Next) and (Previous) are only displayed when the PowerPoint Slide Show is running.

■

Drawing or Erasing Lines

For the instructions, refer to “Step 2: Drawing and erasing lines on the Desktop” on page 38.

Note

•

The width, color of the markers and the size

of the eraser can be changed. (See page 41.)

•

Handwritten lines drawn on the Desktop may be hidden or shifted when an application or a window is operated. If this occurs, click

(Refresh) to display the Desktop.

■

Refreshing Drawings on the

Desktop

Drawings on the Desktop may be hidden or shifted when an application or a window is operated. If this occurs, refresh the Desktop.

1

Click (Refresh) in the Desktop Drawing

Tool.


■

Changing Marker / Eraser

Settings

It enables to change the width, color of the markers and the size of the eraser used in the Desktop

Drawing Tool. These settings are effective until being changed.

1

Click (Setting) in the Desktop Drawing

Tool.

• The Marker / Eraser Setting window appears.

2

Change the width or color of markers, or size of the eraser.

■

Erasing All Drawings on the

Desktop

1

Click (All Clear) in the Desktop Drawing

Tool.

• A verification window appears.

2

Click

[OK]

to clear all.

•

Same Width

:

Width of all color markers can be set to the same width of the black marker by checking the check box.

•

Black / Red / Blue / Green

:

Width (1 - 30 dots) or color of each marker can be set.

To change the width,

- Type the number of width.

- Click the right or left arrow of the scroll bar.

- Drag the scroll bar to the right or left.

To change the color,

Click the color of marker. Click the desired color from the

Basic colors

palette in the

Color window.

41

42


•

Highlight

:

The line becomes transparency by clicking it so the background can be seen.

•

Eraser Radius

:

The size of the eraser can be set from 1 to

60 dots.

To change the size,

- Type the number of size.



3

Click

[OK]

.

•

A window appears to confirm whether the setting is also reflected to the lines that have been already drawn.

4

Click

[All Strokes]

or

[New Strokes]

.

•

All Strokes

:

All lines are redrawn with the new setting.

•

New Strokes

:

The setting is only reflected for subsequently drawn lines.

Note

•

When the marker color is changed, the color will be displayed on the bottom-right of the marker tool in the Desktop Drawing Tool, but the marker tool color will not change.

•

If the background is dark and the drawn lines are hard to see when marker is highlighted, remove the check mark of the

Highlight

check box. When the line crosses with one of the different color, the cross point will become dark.

■

Changing the Desktop to the

Whiteboard

Allows you to make the background of the Desktop white.

1

Click

Drawing Tool.

• Clicking (White Background) again returns the background to the original.

■

Saving Desktop as an Image File

Allows you to save the background image of the

Desktop and handwritten lines that were drawn on the

Desktop as an image file.

There are two ways to save files; saving a file after entering the file name or automatically saving a file with the saving date as its file name. For more details on file saving methods and settings for file format,

refer to “Setting Options” on page 36.

[A] Saving files by entering file names

1

Click (Capture) in the Desktop Drawing

Tool.


2

Enter the folder where you want to save the file, the file name and the file type.

• The following file formats can be selected for the File type.

Bitmap Files (*.bmp), TIFF Files (*.tif) or

JPEG Files (*.jpg)

3

Click

[Save]

.

• In the Save As window, if an existing TIFF file is selected, another window will be displayed to confirm overwriting it or adding the file to it. Selecting “Yes” will add the image to the end of the existing file as a multi-page TIFF. Selecting “No” will delete the existing image and save as a single page

TIFF file.

[B] Saving files automatically, named with the date

If the

Save file automatically, named with date

is enabled in the Options setting, files will be

automatically saved. (Refer to “Setting Options” on page 36.)

1

Click (Capture) in the Desktop Drawing

Tool.

• The save verification window appears.

2

Click

[OK]

.

• If

Do not show this message again

check box is clicked, the save verification window does not appear when saving a file. To

display it again, refer to “Setting Options” on page 36.

■

Printing an Image of the Desktop

Allows you to print the background image of the

Desktop and handwritten lines that were drawn on the

Desktop.

1

Click (Print) in the Desktop Drawing Tool.

• The Print window appears.

2

Set the

Printer

and

Number of copies

.

3

Click

[OK]

.

• The Printing window appears.

• To stop the printing, click

[Cancel]

in the

Printing window.


■

Using the On-Screen Keyboard

On-Screen Keyboard is a tool which the user can use to input data: it is a virtual keyboard on the computer screen which has been projected onto the Interactive

Panaboard screen. It can also be used with the handwriting tablet to recognize handwriting text.

The On-Screen Keyboard provided with Windows can also be used instead of the original keyboard.

(Refer to “Setting Options” on page 36.)

[A] Inputting characters

1

Click

Tablet)) in the Desktop Drawing Tool.

•

If the Handwriting Tablet appears, click icon on the Handwriting Tablet to change to the On-Screen Keyboard. Selecting

Standard Keyboard

or

Enhanced

Keyboard

from the

Keyboard

menu of the

Handwriting Tablet is also available to change to the On-Screen Keyboard.

2

Activate the target application window for input. Align the text cursor with the input field.

3

Click the characters on the On-Screen

Keyboard.

•

The title of the target application for input currently is displayed as the On-Screen

Keyboard title.

[B] Using the Handwriting Tablet

1

Click

Tablet)) in the Desktop Drawing Tool.

• If the On-Screen Keyboard appears, click

icon on the On-Screen Keyboard to change to the Handwriting Tablet. Selecting

Handwriting Tablet

from the

Keyboard

menu of the On-Screen Keyboard is also available to change to the Handwriting

Tablet.

2

Activate the target application window for input. Align the text cursor with the input field.

43

44


3

Draw text in the Handwriting Tablet using the

Electronic Pen.

• The handwriting will be recognized and displayed on the upper-left of the

Handwriting Tablet.

[C] Selecting the style

1

On the

Keyboard

menu, select one of the following.

•

Enhanced Keyboard

:

A keyboard with a numeric keypad appears.

•


:

A keyboard without a numeric keypad appears.

•


:

Displays the entry tablet for handwriting recognition.

4

Click

[send]

of the Handwriting Tablet.

•

The recognized text is entered into the application.

•

The recognized text can be cleared by clicking

[clear]

before clicking

[send]

.

Note

• English or German handwriting is the only language that can be recognized.

Handwriting recognition for German will be available only when German is selected in

“Regional Setting” of the Windows “Control

Panel”.

• Words that are possibly misspelled will be displayed with wavy underlining. To Correct words that might be misspelled, right-click on the word and select from the list of alternatives. However, in some cases, no alternatives will be displayed.

• It is possible to enter the text directly into the target application even if

[send]

is not clicked. This setting can be performed by selecting


from the

Settings

menu. (Refer to “[G] Setting the

Handwriting Tablet” on page 45.) However,

spell check cannot be used in this case.

Standard Keyboard

[D] Selecting the layout

1

On the

Keyboard

menu, select one of the following.

•

101 keyboard

:

The U.S. standard keyboard appears.

•

102 keyboard

:

The general-purpose keyboard appears.

Note

•

If the data which has actually been input does not match the characters displayed on the On-Screen Keyboard, ensure that the input locale settings match. The input locale can be set using “Input Locale” in ”Keyboard” of the Windows “Control Panel”.

[E] Always displaying the keyboard at the top of the screen

1

Click

Always On Top

on the

Settings

menu, and place a check mark next to the menu.

•

If the On-Screen Keyboard is not to be displayed continuously kept at the top of the screen, click

Always On Top

on the

Settings

menu to remove the check mark.

[F] Changing the keyboard size

1

Click the desired On-Screen Keyboard size from

Resize

in the

Settings

menu.

Note

•

Alternatively, the size of the On-Screen

Keyboard can be changed by dragging one of the edges of the On-Screen Keyboard window.

•

The aspect ratio of the On-Screen Keyboard is fixed.

•

The width of the window size ranges from one-half to double the

Middle

size.

•

The keyboard size in


mode or

Enhanced Keyboard

mode cannot be changed by dragging the upper or lower borders.

•

The tablet size in


mode cannot be changed by dragging the upper border.


■

Controlling a PowerPoint Slide

Show

A PowerPoint Slide Show can be run using the

Desktop Drawing Tool. Drawing data is recorded for each slide, so the drawing data will always be displayed for the corresponding slide. Drawing data can be saved in a file, which enables reuse with the next time presentation.

To use the PowerPoint Slide Show features,

PowerPoint

®

97 or later must be installed on the computer.

The drawing data for slides is used by the Desktop

Drawing Tool. It is not PowerPoint data.

[G] Setting the Handwriting Tablet

1

Click

Handwriting Tablet...

in the

Settings

menu.

•

The Handwriting Tablet Settings window appears.

2

The following items can be set.

•

Waiting Time to Recognition

:

Sets the standby time after handwritten input until recognition is started.

•

Add Space

:

Specifies whether or not to add a space after the recognized text.

•

Send Recognition Directly

:

Checking the check mark directly send the recognized text to the target application even if

[send]

is not clicked in the On-Screen

Keyboard window.

3

Click

[OK]

.

[A] Running a slide show

1

Click (PowerPoint Slide Show) in the

Desktop Drawing Tool.


2

Enter the file path and file name of the

PowerPoint file that runs the Slide Show.

• The file name extension is “.ppt”.

3

Click

[Open]

.

• PowerPoint will be launched and the Slide

Show will automatically run.

Note

•

Clicking (PowerPoint Slide Show) when the PowerPoint file is open will automatically run the Slide Show of the open file without displaying the Open window. This will be the

Slide Show controlled.

•

To control a Slide Show that PowerPoint is running, click (PowerPoint Slide Show).

45

46


[B] Switching slides in the slide show

The Desktop Drawing Tool displays (Next) and

(Previous) buttons when a Slide Show is running.

1

Click (Next) or (Previous) in the

Desktop Drawing Tool.

• There is no need to momentarily change to

(Arrow) to switch slides when selecting the Marker or Eraser tool.

• These perform the same operation as “Next” and “Previous” in a PowerPoint Slide Show.

Note

•

The drawing data will not be displayed when switching slides without using the Desktop

Drawing Tool. In this case, click

(Refresh) to display the drawing data.

[C] Quitting the slide show

1

Click (PowerPoint Slide Show) in the

Desktop Drawing Tool when the Slide Show is running.

•

The PowerPoint Slide Show will be stopped.

Note

• If the Slide Show is reached the end by clicking (Next), the Desktop Drawing

Tool will automatically sense the end of the

Slide Show and stop without clicking

(PowerPoint Slide Show).

■

Saving the Drawing Data for

Slides

When the Desktop Drawing Tool is exited, the confirmation window will be displayed whether to save the data drawn with markers or eraser. If the drawing data is saved through this window, it will be named with the same name as the PowerPoint file (with the file extension “.ips”). By default, it will be saved to the same folder as the PowerPoint file. If the file cannot be saved to this folder, it will be saved to the folder set

in “Options”. (Refer to “Setting Options” on page 36.)

Note

•

The drawing data is saved in a proprietary format as a drawing data file with the file extension “.ips”.

■

Using the Saved Drawings with

Slides

When (PowerPoint Slide Show) is clicked, if there is a drawing data file in the same folder with the

PowerPoint file or in the folder specified in “Options” with the same name as the PowerPoint file (refer to

“Setting Options” on page 36), a window will be

displayed to confirm whether to use the file. If the file is chosen for use, the data will be loaded and displayed with the slides.

Note

• If a drawing data file that was saved is no longer needed, delete it using Windows

Explorer or a similar means.

■

Recording Drawing Data in IPB

Document

Allows you to create an IPB document to record the drawing on the Interactive Panaboard.

There are two ways to record. To select it, refer to

“Setting Options” on page 36.

[A] Recording by using “(Method 1) Draw strokes and record after verifying the background image”

1


Tool.

• The image of the Desktop will be displayed in a window.

2

Click

[OK]

to store the data as the background image of the 1st page.

• If there are drawn lines on the desktop, a verification window appears to confirm whether to erase drawings.

To erase the drawn lines, click

[Yes]

.

To leave the drawn lines, click

[No]

.

3

Draw lines using (Black, Red, Blue or

Green Marker) or (Eraser) in the Desktop

Drawing Tool.

4

Click (New Page) to add a page.

If no pages will be added, advance to step 11.

• The recording image will be displayed in a window.

5

Click

[OK]

to record the recording image.

• A verification window appears to confirm whether to erase the drawings.

6

Click

[Yes]

to erase the drawings.

Or, click

[No]

to leave the drawings.

• The recording process is paused. The mouse cursor will automatically change to

(Arrow), allowing the background image to be changed. While the recording process is paused, all of the Desktop Drawing Tool icons are inactive except (REC Start) and (White Background) icons.

7

Switch the Desktop to the desired background.


8

Click (REC Start) to restart the recording of a new page.

• The image of the Desktop will be displayed in a window.

9

Click

[OK]

to store the data as the background image of a new page.

• All of the Desktop Drawing Tool icons will become active.

10

To add multiple pages, repeat steps 3 to 9.

11


Tool.

•

The recording image will be displayed in a window.

12

Click

[OK]

to record the recording image.

•

The Save As window appears.

13

Enter the folder where you want to save the file and the file name.

•

The extension of the file is “.ipb”.

14

Click

[Save]

.

[B] Recording by using “(Method 2)

Record strokes and background image together”

1

Switch the Desktop to the desired background. Draw lines using

Red, Blue or Green Marker) or

(Black,

(Eraser) in the Desktop Drawing Tool.

2


Tool.

• The image to be recorded for the current page will be displayed in a window.

3

To record, click

[Record]

or


.

• Clicking

[Record]

will record the drawings and leave it.

• Clicking


will record the drawings and erase it.

• Clicking

[Cancel]

will cancel recording.

4

It is needed to add multiple pages, draw lines and click (REC Page) instead of

(REC Start), then click

[Record]

or

[Record &

Erase drawings]

.

47

48


5


Tool.


6



7

Click

[Save]

.

Note

•

Do not change the Desktop resolution while recording data using method 1 or method 2.

If changed, the Desktop image will not be displayed properly in the View window.

•

While using method 1 to record data, page numbers can be verified by (Page No.) in the Desktop Drawing Tool. Before starting to record data, the data value is “0” and will change to “1” when (REC Start) is clicked. The value will then count up for each page break. When switching the computer screen being projected onto the screen of the Interactive Panaboard during a meeting, begin drawing after adding (New Page) and recording the background image of the new page.

•

While using method 2 to record data, the number of pages can be verified by

(Page No.) in the Desktop Drawing Tool.

Before starting to record data, the data value is “0” and it will change to “1” when

(REC Start) is clicked. The value will then count up each time the (REC Page) is clicked.

•

A maximum of 50 pages can be stored.

■

Switching the Desktop Drawing

Tool Display

The Desktop Drawing Tool can be displayed in three sizes.

•

Standard Display

:

Shows all buttons.

•

Marker Display

:

Shows only the buttons used for drawing and erasing handwritten lines. The buttons for saving image files or recording IPB documents are not showed.

•

Compact Display

:

Use the Compact Display when the Desktop

Drawing Tool covers up too much of the image behind it. It keeps the part that is hidden to a minimum.

Switching among their views can be done by clicking the (Shrinking) or (Expansion) buttons.


Marker Display

Compact Display

Note

•

Tools cannot be changed in the

Compact

Display

view.

•

During PowerPoint Slide Show, the


and

Marker Display

views show (Next) and (Previous) icons.

•

To disappear the Desktop Drawing Tool, select a marker or eraser and press the projected screen with the Electronic Pen while pressing the pen button.

To display the Desktop Drawing Tool again, locate the Electronic Pen at the desired place on the projected screen and press the projected screen with the Electronic Pen while pressing the pen button.

Using the Panaboard in

Whiteboard Mode

Starting the Interactive


1

Turn on the Interactive Panaboard.

2

Turn on your computer and start up Windows.

3

For Windows 2000 / Windows XP

Connect the USB cable provided from the electronic board to the computer.

• The Interactive Panaboard Software is automatically started.

For WIndows 98 / Windows Me

Click

[Start]

and select

Programs

-

Panasonic

-


-


.

• The window appears to show the Interactive

Panaboard is detected.

Note

•

If the Panaboard Operation Panel is displayed using the Panasonic-DMS, the

Panasonic Interactive Software cannot be started. Close the Panaboard Operation

Panel and start it. Refer to page 72.

•

To change the setting so the Interactive

Panaboard Software is not started automatically when connecting the USB cable, perfrom the following.

(1) Connect the USB cable provided from the electronic board to the computer.

(2) Click

[Start]

and select

Settings

-

Control Panel

, then double-click

Scanners and Cameras

icon.

(For Windows XP, click

[start]

and select

Control Panel

)

(3) Double-click

Panaboard-UB8 USB

Device Driver

icon and click the

Disable device events

check box in the

Events

tab. Click

[OK]

.

To start the Interactive Panaboard Software, click

[Start]

and select

Programs

-

Panasonic

-


-


.

(For Windows® XP,

All Programs

instead of

Programs

)

4

Click

[OK]

.

•


Using the Panaboard in Whiteboard Mode

5

Click the

Whiteboard

icon and click

[OK]

.

• The Whiteboard Window appears and the icon is registered in the Taskbar.

Note

•

If the Interactive Panaboard is not detected, the notification window appears. In this case, check the status of the Interactive

Panaboard and confirm that the USB cable is connected. For details on the settings of the

communications port, refer to “Setting the

Communication Port” on page 35.

•

If the Interactive Panaboard Software is used without connecting the Interactive

Panaboard, click

[Offline]

in the notification window. In the off-line state, a file recorded in the Whiteboard mode can be played back and edited.

• The tool tip text displayed when the mouse is located over the icon in the Taskbar allows you to determine the current mode.

- Whiteboard mode: “Interactive Panaboard

(Whiteboard)”

- Projector mode: “Interactive Panaboard

(Projector)”

■

Exiting the Interactive Panaboard

Software

Right-click the icon in the pop-up menu.

in the Taskbar and click

Exit

Pop-up Menu Configuration

Right-click the icon pop-up menu.

in the Taskbar to display the

Following operations are possible in the pop-up menu.

Select Mode...

: (see page 35)

Allows you to switch between modes

(Projector mode / Whiteboard mode).

Open / Close Whiteboard Window

:

Allows you to open or close the Whiteboard window by selecting this menu. This menu is alternately changed to open or close every selecting.

Settings

:


: (see page 35)

Sets the communication port.

Adjustment...

: (see page 36)

Adjusts the position of the Electronic Pen or the Electronic Eraser to improve the shifted position.

Options...

: (see page 36)

49

50


Print out image automatically rotates to fit printer paper direction

setting is only related to the Whiteboard mode.

Help Topics...

:

Displays the help of the Interactive Panaboard

Software.

About...

:

Displays the Interactive Panaboard Software version information.

Exit

:

Exits the Interactive Panaboard Software.

Basic Operation in

Whiteboard Mode

This section explains the basic operations when using the Interactive Panaboard Software in the Whiteboard mode. We recommend trying the operations in accordance with the following steps to help you completely understand the operations in the

Whiteboard mode.

Step 1:

Drawing and erasing handwritten lines on the Interactive

Panaboard screen

To start the Interactive Panaboard Software, see page 49.

1

If the Whiteboard window is not displayed, right-click the icon in the Taskbar and click

Open Whiteboard Window

.

2

Remove the cap of the Electronic Pen and draw on the Interactive Panaboard screen using the Electronic Pen.

3

Erase handwritten lines drawn on the

Interactive Panaboard screen using the

Electronic Eraser.

• Portions erased on the screen will also be erased on the page in the Whiteboard window.

• These drawing and erasing operations are recorded automatically.

Note

•

The following shows the writing area in the

Whiteboard mode. Do not write the shaded area on the figure.

100 mm

(3

15/16

")

35 mm

(1

3/8

")

50 mm (2")

Position receiver

35 mm

(1

3/8

")

25 mm (1")

• Do not cover the position receiver with your hand as this may cause interactive function to stop functioning.

• Press down firmly with the point of the

Electronic Pen or the eraser on the screen film until you hear a buzzing sound.

• Do not perform the following action near

(less than 1m) the Interactive Panaboard while using the Whiteboard mode as this may display unnecessary streaks not written in the Whiteboard window.

- Exchanging markers for interactive (small) of the Electronic Pen

- Setting or removing a marker cap of the

Electronic Pen

- Pushing the point of the Electronic Pen

• When exchanging markers for interactive

(small) of the Electronic Pen, lock the pen holder lever while fully inserting the marker into the pen holder until you hear a buzzing sound. Detection of the marker color may not work well unless the marker is inserted fully

into the pen holder. (Refer to “Setting the

Electronic Pen” on page 25.)

•

The position on the screen where you are drawing will be reproduced on the page in the Whiteboard window on the computer in real-time.

Step 2: Adding a new page by pressing the Advance Key

Add New Page when Advance Key is pressed

is selected in the

Options

window, a new page is added to an IPB document when the (Advance Key) on the Interactive Panaboard is pressed. This method is recommended in the case the screen is fed every time one topic is finished in only one side of the screen.

1

Click

Options...

in the

Settings

menu.


2

Enable


. (This is the default setting.)


Step 3: Switching the page by pressing the Advance Key

Switch the current page in last 2 pages when

Advance Key is pressed

is selected in the

Options

window, the screen is fed and the corresponding page is selected in the IPB document every pressing the

(Advance Key). This method is recommended in the case a conference is continued using both screens while changing the screen (front and back).

For the detailed information, refer to “[G] Options setting” on page 70.

1

Click

Options...

in the

Settings

menu.


2

Enable

Switch the current page in last 2 pages when Advance Key is pressed.

• The copy function of the Interactive

Panaboard is changed to copy (backup) the editing page of the IPB document.

3

Click

[OK]

.

4

Draw lines and press (Advance Key) on the Interactive Panaboard.

•

The screen is fed and a new page is automatically added as the last page of the

IPB document.

5

Wipe the drawings clearly if something had been drawn on the screen.

6

Repeat steps 4 – 5 if needed.

Note:

•

New pages can be added until the total pages are reached to 50 pages.

•

The screen can be printed by pressing the

(Copy Key) on the Interactive

Panaboard.

3

Click

[OK]

.

•

A new page is added and total page of the

IPB document becomes 2 pages.

•

If the saved IPB document more than 2 pages is opened, the previous one of the last page is selected.

4

Draw lines and press (Copy Key) on the

Interactive Panaboard to copy (backup) the selected page.

•

The copied page is added to the left of the last 2 pages in the IPB document.

51

52


5

Press (Advance Key) on the Interactive

Panaboard.

• The screen is fed and the last page of the

IPB document is selected.

6

Draw lines and press (Advance Key) on the Interactive Panaboard to return to the other side screen if needed.

• The screen is fed and the previous one of the last page of the IPB document is selected.

7

Continue the conference while changing the screen by pressing (Advance Key).

Step 4: Saving the drawing data in a file

All drawing and erasing operations in the Whiteboard window are automatically recorded. And if the data is saved in the Interactive Panaboard format file

(extension “.ipb”, referred to as IPB documents), the details of meetings with the Panaboard can be played back and edited later.

1

Click

Save As...

in the

File

menu.


2



3

Click

[Save]

.

Step 5: Opening the saved data

The saved data can be displayed in the Whiteboard window as well as browsed, played back and edited.

If the Whiteboard window is not displayed, right-click the icon in the Taskbar and click

Open

Whiteboard Window

.

1

Click

Open...

in the

File

menu.


2



3

Click

[Open]

.

Note

•

Many different operations can be executed in the displayed IPB document.

- Saving the IPB document in another file

format. (See page 57.)

- Switching a page of the IPB document.

(See page 61.)

- Editing a page of the IPB document. (See

page 61.)

- Playing back the IPB document. (See page

63.)

- Recognizing Handwriting in the IPB

document. (See page 64.)

- Printing the IPB document. (See page 66.)

Using the View Window or Whiteboard Window


■

View Window / Whiteboard

Window

1

About View Window /

Whiteboard Window

■

View Window in Projector Mode

Desktop background data and data of handwritten lines recorded using the Desktop Drawing Tool can be displayed in the View window as well as browsed, reproduced and edited.

In the View window, displaying and editing IPB documents which are recorded by the Desktop

Drawing Tool are possible. It can also be used for handwriting recognition for output as text.

To display the View window, see page 39.

2

3

6

■

Whiteboard Window in

Whiteboard Mode

Whiteboard window is a function to reproduce the lines drawn using the Electronic Pen and the

Electronic Eraser on the Interactive Panaboard to the computer screen.

Recorded image data can be saved as an IPB document so that you can see the file later.

The following functions are available;

- Adds lines with marker.

- Erases unnecessary lines with eraser.

- Copies entire page or partial image to other general image formats such as Bitmap, JPEG, TIFF and these images can be transferred to other application software.

- Provides handwriting recognition for output as text.

To open the Whiteboard window, see page 49.

4

5

1. Title bar:

Indicates the currently opened file name of the

IPB document.

2. Toolbar:

Toolbar has buttons which most frequently used functions are formed as icon.

It consists of Main Toolbar, Page / Play

Toolbar and Marker / Eraser Toolbar. Each tool bar can be moved to any location by dragging.

3. Main view:

The selected thumbnail page is displayed in the Main view by clicking the thumbnail. You can draw, erase lines or copy a part of page on the IPB document.

4. Thumbnail view:

The thumbnail image of all pages of the IPB document can be displayed.

At the bottom of each thumbnail, the last modified date is displayed.

The thumbnail corresponding to the main view is framed.

5. Status bar:

Indicates the information of the IPB document.

Replay mode:

Indicates if it is in the replaying or not.

Image size:

Indicates the page size when it is 100% display ratio.

Page number:

Indicates the total number of pages and the page being displayed.

6. Text Editor:

Receives the data handwriting that has been recognized. Enables editing of the text.

53

54


■

Difference between the View

Window and the Whiteboard

Window

The View window (Projector mode) and the

Whiteboard window (Whiteboard mode) are windows which function to display and edit IPB documents.

Basically, they both have identical functions. However, the Whiteboard window has some functions the View window does not have as follows.

For more detailed information, refer to “Managing IPB

Documents” on page 57.

System of units:

• The View window displays IPB documents which record the drawing on the Interactive Panaboard screen projecting the computer screen.

Consequently, the size is represented by dots.

• In the Whiteboard window the drawing on the

Interactive Panaboard screen using the Electronic

Pen and Electronic Eraser is virtually displayed in a computer window. Consequently, units of length are standard. You can choose between units in millimeters or inches.

New

in the

File

menu:

• The View window is used to display and edit IPB documents created by the Desktop Drawing Tool.

Consequently, the

New

menu does not exist.

• Closes the IPB document currently displayed in the

Whiteboard window and displays a new IPB document.

Add New Page

in the

Edit

menu:


Consequently, the

Add New Page


• Adds a new page (blank page) next to the last page of the IPB document in the Whiteboard window.

Add Copy Page

in the

Edit

menu:


Consequently, the

Add Copy Page


• Adds a copy of the page next to the last page of the

IPB document in the Whiteboard window.

■

Menu Configuration

Following menus can be used in the View window or the Whiteboard window.

* denotes the function of Whiteboard window only.

Menu

[File] menu

New *

Description

Open

Save

Save As

Closes the IPB document and creates a new IPB document.

(See page 57.)

Opens an IPB document.

(See page 57.)

Saves the IPB document.

(See page 57.)

Saves the IPB document with new file name. (See page

57.)

Print Preview

Print

Export

Enables to check the layout before printing.

(See page 66.)

Prints the IPB document.

(See page 66.)

(See page 57.)

Image

HTML

Close View window

Close

Whiteboard window *

[Edit] menu

Undo

Outputs the page as the image file (Bitmap, JPEG,

TIFF).

Outputs the page as the

HTML file.

Closes the View window.

(View window only)

Closes the Whiteboard window.

Redo

Restores drawing backward

line by line. (See page 62.)

Cancels the undo.

(See page 62.)

Copy

Select All

Copies the selected area in the page to the clipboard.

(See page 62.)

Selects entire page. (See

page 62.)

Add New Page * Adds a new page next to the

last page. (See page 62.)

Menu Description

Add Copy Page * Adds copied page next to the

last page. (See page 62.)

Delete Current

Page

Handwriting

Recognition

Deletes the displayed page.

(See page 62.)

Converts handwriting letters

to texts. (See page 64.)

[Edit] menu

(When editing using the Text Editor)

Undo Restores the state before the last text action.

(See page 64.)

Redo Cancel the undo.

(See page 64.)

Cut

Copy

Removes the selected text and copies it to the clipboard.

(See page 65.)

Copies the selected text to

the clipboard. (See page 65.)

Copy All Pages Copies the text of all pages to

the clipboard. (See page 65.)

Paste

Delete

Select All

Applies the text in the

clipboard. (See page 65.)

Deletes the selected text.

(See page 65.)

Selects all the text of a page.

(See page 65.)

[Page / Play] menu

Start

Pause

Starts the replay.

(See page 63.)

Pauses the replay.

(See page 63.)

Stop Stops the replay.

(See page 63.)

Playback Option (See page 67.)

All Pages Plays back all pages.

Selected Page Plays back selected page.

Loop Playback Plays back continuously.

Go to First Page Displays the first page.

(See page 61.)

Go to Previous

Page

Displays the previous page.

(See page 61.)

Go to Next Page Displays the next page.

(See page 61.)

Go to Last Page Displays the last page.

(See page 61.)

Go to Page Displays the specified page.

(See page 61.)


Menu

[View] menu

Zoom

Fit Window

200%

150%

100%

75%

50%

25%

Description

(See page 60.)

Displays the current page to

fit window. (See page 60.)

Displays the current page by

200% of its original size.











10%

Full Screen

Main Toolbar

Page / Play



Uses the entire display area of your monitor to display the

current page. (See page 60.)

Displays or closes the Main

Toolbar. (See page 56.)

Displays or closes the Page /

Play Toolbar. (See page 56.)

Markers / Eraser Displays or closes the

Markers / Eraser Toolbar.

(See page 56.)

Status Bar

Text Editor

Displays or closes the Status

Bar.

Displays or closes the Text

Editor.

[Settings] menu

Information

Stores the information of the

meeting. (See page 66.)

Play

Changes the setting of

playback. (See page 67.)

Markers and

Eraser

Changes the color and size of the marker, and size of the

eraser. (See page 67.)

Export Image

Sets the quality of JPEG or compression of TIFF etc.

(See page 68.)

55

56


File

Menu

Spell Check

Options

[Help] menu

Help Topics

About

Description

Changes the default folder to save an IPB document or interval timing when performing the automatic

back up. (See page 69.)

Sets the setting for spellcheck of the Text Editor.

(See page 70.)

Sets the length unit mm or inch and the display method of a file name in the title bar.

(See page 70.)

Displays the help information.

Displays the version of the

Interactive Panaboard

Software.

■

Tool Bars

Following menus can be used in View window or

Whiteboard window.

•

Main Toolbar

Handwriting Recognition

Fit Window

Zoom

Full Screen

* There is only the (New icon) in the Whiteboard window.

•

Page / Play Toolbar

•

Markers / Eraser Toolbar

To display a Toolbar, click the

View

menu and then click the Toolbar you want to display (any one of

Main

,

Page / Play

,

Markers / Eraser

).

If the Toolbar is already displayed, there is a check mark next to that Toolbar.

To turn off the Toolbar, click

View

menu and remove the check mark from the Toolbar you want to hide.

Note

• The Toolbars can be dragged and moved to any location on the screen.

Managing IPB Documents

■

Creating an IPB Document

(Whiteboard window only)

In Whiteboard mode, creating a new IPB document is needed to record work performed on the Interactive

Panaboard.

1

Click

New

in the

File

menu.

•

When the IPB document currently being edited is changed, a window will display asking you to confirm the save.

Note

•

When the Whiteboard window is displayed, an IPB document is automatically created and a new page is displayed in the main view.


Note

•

To open a recently opened file, click the file name you want to open in the

File

menu.

Eight recently opened IPB documents will be displayed in the

File

menu.

•

The IPB documents can also be opened by double-clicking the file icon in the file system.

View window or Whiteboard window is automatically switched depending on the file created in Projector or Whiteboard mode.

•

If it is needed to create an automatic save file for when a power failure or other incident occurs, check the

Create Recovery File

check box in the File Settings window

(

Settings

-

File...

) in advance.

When opening the recovery file, select

All

Files

in the

Files of type

box to display the recovery file with an “.ip~” extension.

■

Opening an IPB Document

1

Click

Open...

in the

File

menu.


2



3

Click

[Open]

.

■

Saving the IPB document

1

Click

Save

in the

File

menu.

Note

•

To save a currently open IPB document with a different name, click

Save As...

in the

File

menu.

■

Saving the IPB Document in another File Format

Exporting images allows you to save files in another file format to use it in other applications. This makes it possible to easily distribute the contents of meetings stored in the IPB document to users who do not have the Interactive Panaboard Software.

An IPB document can be saved as an image file or

HTML file as follows.

57

58


[A] Saving as an image file

1

Click

Image...

of

Export

in the

File

menu.

• The Export Image window appears.

2

Specify the pages to be exported and image size.

•

To save all the pages, select

All # Pages

.

(#: total number of pages)

•

To specify the page range, click

Pages

and then enter the page range.

•

Clicking

[Setup...]

will allow you to set image size, JPEG file quality and TIFF file compression.

3

Click

[OK]

.

•

The Save As window appears.

4

Enter the folder where you want to save the file, the file name and the file type.

•

The following file formats can be selected for the

Save as type

.

Bitmap Files (*.bmp), JPEG Files (*.jpg) or

TIFF Files (*.tif)

•

When specifying TIFF to save multiple pages,

Multiple Page

or

Single Page

can be selected.

5

Click

[Save]

.

Note

•

If

Single Page

is selected when saving multiple pages as TIFF files, the number of files created will correspond to the number of pages. A two-digit extension will be added after the file name (such as “01”, “02”, “03”, etc.) to match the page number.

•

When saving as a multi-page TIFF file, if an existing TIFF file is selected, another window will be displayed to confirm overwriting it or adding the file to it. Selecting “Yes” will add the image to the end of the existing file as a multi-page TIFF. Selecting “No” will delete the existing image and save as a multi-page

TIFF file.

•

When saving a single page with an existing

TIFF file name, another window will be displayed to confirm overwriting it or adding the file to it. Selecting “Yes” will add the image to the end of the existing file as a multi-page TIFF. Selecting “No” will delete the existing image and save as a single-page

TIFF file.

•

Settings such as size and compression when saving the IPB document as an image file are managed in

Export Image...

in the

Settings

menu. (Refer to “[D] Setting an image file when exporting or copying by dragging and dropping” on page 68.)

[B] Saving as an HTML file

You can save the IPB document as an HTML file per page.

In addition, meeting information can also be output at the same time to that index page.

Setting multiple pages and saving the IPB document as an HTML file will create an index file, linked HTML pages and images.

Using this method will allow the contents of meetings recorded in the IPB documents to easily provide to people using a Web browser.

1

Click

HTML...

of

Export

in the

File

menu.

• The Export HTML window appears.

2

Click

[Browse...]

and specify the folder where the IPB document will be saved as a HTML file.

3

Set the page range.

•

Selecting

All Pages

will output all the pages of the displayed IPB document to the HTML files.

•

Selecting

Current Page

will output only the page displayed in the main view to the HTML file.

•

Selecting

Pages

will output the specified page or the specified page range to the

HTML file. Enter a comma to separate the page numbers or a hyphen to connect the first page number and the last page number.


4

If necessary, change the other export settings shown below and click

[OK]

.

[File] group

•

Page Image

:

Changes the width and height of the image of the exported page in pixel. Checking the

Constrain Proportions

check box will preserve the ratio of the width and height of the page even if the dimensions of the exported page are changed.

•

Thumbnail Image

:

Changes the width and height of the thumbnail image of the exported page in pixel. Checking the


check box will preserve the ratio of the width and height of the page even if the dimensions of the exported page are changed.

[Colors] group

Clicking the rectangular colored portion will display the Color window. Click the color from the Basic colors.

•

Background

:

Selects the color of the background of the

HTML file.

•

Text

:

Selects the color of the text used in the

HTML file.

•

Table Labels

:

Selects the background color of the labels of the tables in the HTML file.

•

Table Items

:

Selects the background color of the items of the tables in the HTML file.

[Export Contents] group

The following is added to the index page of the exported HTML file by checking each check box.

•

Thumbnail Image

:

Adds a thumbnail image of the page.

•

Page Date

:

Displays the date and time the page was created.

•

Created Date

:

Displays the date and time the IPB document was created.

•

Modified Date

:

Displays the date and time updated last to the IPB document.

59

60


•

Participants / Manager / Subject /

Description / Contacts / Company

:

Displays the information specified in the

Information...

in the

Settings

menu.

Note

•

It is recommend to save HTML files in an empty folder where another HTML files are not stored. If you attempt to save a file in an already existing folder, a message will be displayed asking you to confirm whether or not to overwrite the already existing HTML file.

•

When exporting multiple pages to HTML files, an index file “index.html” and HTML files named after the page numbers (for example, n pages) “page 01.html, page

02.html, page 03.html, --- page 0n.html” are created. Images displayed in the HTML files named after the page numbers “page 01.jpg, page 02.jpg, page 03.jpg, --- page 0n.jpg” are also created. If the Thumbnail Image check box is checked, thumbnail images displayed in the HTML files named after the page numbers “small 01.jpg, small 02.jpg, small 03.jpg, --- small 0n.jpg” are also created.

■

Changing the Display Method

[A] Displaying expanded / reduced page

You can expand the page and display a portion of the page larger or reduce the page and display the entire page.

1

Position the cursor over

Zoom

in the

View

menu and click the percentage (%) you want to display.

Note

•

You can also enter a numeric value into

Zoom box in the Main Toolbar to change the display percentage. The percentage can be set in units of 1%.

[B] Displaying entire page inside the main view

1

Click

Fit Window

of the

Zoom

in the

View

menu.

[C] Displaying page as large as possible

To display the page on the screen as large as possible, switch to full screen display mode.

In this mode the Toolbar is displayed as a free toolbar.

1

Click

Full Screen

in the

View

menu.

• To exit full screen display mode and return to the original display mode, right-click the mouse and click

Full Screen

in the pop-up menu.

Note

•

To hide the Toolbar in full screen display, right-click the mouse and click the Toolbar you want to hide in the pop-up menu and remove the check mark. In addition, to display the Toolbar, click the Toolbar you want to display in the pop-up menu to place the check mark.

■

Switching a Page of the IPB

Document

[A] Displaying first page

1

Click

Go to First Page

in the

Page / Play

menu.

[B] Displaying previous page

1

Click

Go to Previous Page

in the

Page / Play

menu.

[C] Displaying next page

1

Click

Go to Next Page

in the

Page / Play

menu.

[D] Displaying last page

1

Click

Go to Last Page

in the

Page / Play

menu.

[E] Specifying a page number to display

1

Click

Go to Page...

in the

Page / Play

menu.

• The Go to Page window appears.

2

Enter the page number you want to display in

Go to Page

.

3

Click

[OK]

.


Note

• To quickly display a page, click the thumbnail display of the page you want to display in thumbnail view.

■

Editing a page of the IPB document

You can edit pages displayed in the main view in the

View window or Whiteboard windows as follows.

• You can use the marker or eraser for additions and modifications.

• You can add a page. (Whiteboard window only)

• You can delete a page.

• You can select portions or entire page and save the contents in the clipboard or copy to other applications.

[A] Drawing and erasing lines on a page

1

Display the page where you want to draw or erase handwritten lines in main view.

2

To draw handwritten lines, click either

(Black Marker, Red Marker, Blue Marker or

Green Marker) in the


Toolbar

.

•

The shape of the mouse cursor changes to

.

3

Position the mouse where you want to draw a handwritten line on the page and drag the mouse.

4

To erase handwritten lines, click (Eraser) in the

Markers / Eraser Toolbar

.

•

The shape of the mouse cursor changes to

.

5

Drag the mouse to the area on the page you want to erase.

Note

•

To return to the state before the changes, click

Undo

in the

Edit

menu.

•

The width and color of the markers and the size of the eraser can be changed. (See

page 67.)

61

62


[B] Undoing

You can restore the drawing using the marker or eraser to their original state, stroke by stroke.

1

Click

Undo

in the

Edit

menu.

• To return to the previous state, click

Undo

again.

Note

•

To cancel the operation that was undone, click

Redo

in the

Edit

menu.

•

The

Undo

/

Redo

can be used over and over. However, if the page changes, the

Undo

/

Redo

will be reset.

[C] Adding a new page to the IPB document (Whiteboard window only)

In Whiteboard mode, a new page can be added next to the last page of the IPB document.

When advancing the screen of the Interactive

Panaboard during a meeting, add a new page.

1

Click

Add New Page

in the

Edit

menu.

•

A new page will be added next to the last page of the IPB document and the display is switched to that page.

Note

•

A maximum of 50 pages can be recorded.

[D] Adding the Copied page to the IPB document (Whiteboard window only)

In the Whiteboard mode, the copy of the page currently displayed in main view can be added next to the last page of the IPB document.

Use this to leave the current contents on the screen before adding new changes.

1

Click

Add Copy Page

in the

Edit

menu.

•

The copy of the currently displayed page will be added next to the last page of the IPB document and the display is switched to that page.

•

A maximum of 50 pages can be recorded.

[E] Deleting currently displayed page

1

Display the page you want to delete in the main view.

2

Click

Delete Current Page

in the

Edit

menu.

•

A window will be displayed asking you to confirm the delete.

3

Click

[OK]

to delete.

•

Use caution because deleted pages cannot be recovered to their original state by

Undo

in the

Edit

menu.

[F] Copying selected page range to clipboard

1

Click (Arrow) in the


Toolbar

and drag the mouse to select the portion of the page you want to copy.

• To select the entire page, click

Select All

in the

Edit

menu.

• The selected area will be displayed in reverse.

2

Click

Copy

in the

Edit

menu.

Note

•

To cancel the selection, click outside of the selected area.

•

The Image copied to the clipboard can be pasted in other applications.

•

The Image copied to the clipboard becomes

BMP image.

[G] Copying selected page range to other application

You can copy data to other applications by dragging and dropping the selected page area. To perform this operation, the application copied to must support OLE

(Object Linking and Embedding).

1

Open the file where the data will be copied to and adjust the position of the application window such that the page to be copied and the file to be copied are displayed in the screen.

2

Click (Arrow) in the


Toolbar

and drag the mouse to select the portion of the page you want to copy.

• To select the entire page, click

Select All

in the

Edit

menu.

• The selected area will be displayed in reverse.

3

Drag the selected area to the copy destination of the other application.

Note

•

To cancel the selection, click outside of the selected area.

•

The file formats to be dragged and dropped can be set by

Export Image...

in the

Settings

menu.


■

Playing back the IPB document

The operations of drawing and erasing lines on each page are automatically recorded in stroke units and the drawing can be played back and confirmed later.

1

Click

All Pages

or

Selected Page

of the

Playback Option

in the

Page / Play

menu.

• The check mark is placed next to the activated menu.

2

Click (Start) in the


.

Play Scroll bar

• In the case of All Pages playback, the playback will start from the original state of the first page. In the case of Selected Page playback, the displayed page contents will return to their original state and the playback will start.

• To stop the playback in the middle, click

(Pause) in the


. To restart the playback in the middle, click

(Start) in the


.

• While stopping temporarily, you can move the Play Scroll bar in the

Page / Play

Toolbar

to playback manually.

• To end the playback in the middle, click

(Stop) in the


.

• Playback is completed when the Play Scroll bar reaches the far right end and stops.

Note

•

You can click the arrows at the right and left of the Play Scroll bar or drag the Play Scroll bar to the right or left to playback the drawing.

•

While playing back, you cannot use the marker and eraser in the


Toolbar

. In addition, in Whiteboard mode drawing on the screen of the Interactive

Panaboard will not be reproduced either.

•

You can change the playback conditions such as the playback interval, playback page

and the playback loop. (See page 67.) You

can also change the settings of the playback page and the playback loop from

Playback

Option

in the

Page / Play

menu.

63

64


■

Recognizing Handwriting in the

IPB document

[A] Recognizing Handwriting

1

Click in the

Edit

menu.

• The Handwriting Recognition window appears.

2

Select the Recognition Range and click

[OK]

.

• The recognition results will be output as text to the Text Editor.

• The recognized text can be selected by clicking the dotted line of the original drawing with

Toolbar

.

(Arrow) in the

Markers/Eraser

• Cutting or deleting the recognized text dissociates it from the handwritten lines.

• When All Pages are recognized, selecting

Undo

from the

Edit

menu cannot restore the file to the previous state.

•

Current Page

:

Drawing in the selected page is converted to text.

•

All Pages

:

Drawings in all pages are converted to texts.

The recognition result of the selected page can be displayed in the Text Editor by selecting the page.

Note

• If

Delete the existing text

check box is checked, the existing text will be deleted before the recognition results are output.

• English or German handwriting is the only language that can be recognized.

Handwriting recognition for German will be available only when German is selected in

“Regional Setting” of the Windows “Control

Panel”.

• To specify a text for recognition using the mouse, click (Arrow) in the

Markers/

Eraser Toolbar

, drag so the rectangle encloses around the drawing for recognition in the Main view, and click the

Handwriting

Recognition...

menu.

• When the text cursor is aligned with the recognized text, the original drawing will be indicated with dotted lines.

[B] Replacing Possibly Misspelled Words with Alternatives

1

Click inside the Text Editor window.

2

Right-click on a word that might be misspelled.

• A pop-up menu will display alternatives.

3

Select the alternative word from the menu.

• The text will be replaced with the menu selection.

Note

•

To specify displaying possibly misspelled words, click

Spell Check...

in the

Settings

menu. (See page 70.)

•

A maximum of five alternatives will be displayed.

•

No alternatives will be displayed in the popup menu when there are no alternatives.

•

Alternatives will only displayed for text recognized using the handwriting recognition function.

[C] Undoing Actions

1


2

Click

Undo

in the

Edit

menu.

Note

•

To cancel the Undo, click

Redo

in the

Edit

menu.

•

Undo / Redo

can be performed up to 100 times, but the counter is reset if another page is selected.

[D] Copying Text

1


2

Select the target text by dragging it.

3

Click

Copy

in the

Edit

menu.

• The text will be copied to the clipboard.

• Selected text can be removed and copied to the clipboard by clicking

Cut

in the

Edit

menu.

Note

•

Text copied to the clipboard can be pasted into other applications.


[G] Deleting text

1


2

Select the target text by dragging it.

3

Click

Delete

in the

Edit

menu.

• The text will be deleted.

Note

•

When recognized text is deleted, the relation between the original drawing and the

recognized text is cancelled. (See page 64.)

[E] Copying text from All Pages to the clipboard

1


2

Click

Copy All Pages

in the

Edit

menu.

• The text in all pages will be copied to the clipboard.

Note

•

Text copied to the clipboard can be pasted into other applications.

[H] Selecting all text on a page

1


2

Click

Select All

in the

Edit

menu.

•

All text in the current page will be selected.

Note

•

To cancel the selection, click inside the Text

Editor window.

[F] Pasting text

1


2

Move the text cursor to the point of insertion.

3

Click

Paste

in the

Edit

menu.

• The clipboard text will be inserted to the point of insertion.

65

66


■

Print the IPB document

[A] Confirming print image of the IPB document before printing

1

Click

Print Preview

in the

File

menu.

•

The window is switched to the Print Preview screen.

2

Click

[Close]

to exit the Print Preview and return the display mode to the original state.

Note

•

The screen image printed is called the Print

Preview. In the Print Preview you can display print images of multiple page at a time. You can also expand or reduce the size of the page displayed in the screen.

■

Settings

[A] Setting the meeting information

Allows you to record the meeting information of the

IPB document; titles, subjects and descriptions, etc.

The information can be output with page images when exporting the IPB documents to HTML files.

1

Click

Information...

in the

Settings

menu.

• The Information window appears.

2

Enter necessary information as follows, and then click

[OK]

.

[B] Printing currently displayed IPB document

1

Click

Print...

in the

File

menu.

•

The Print window appears.

2

Set the

Printer

,

Print range

and

Number of copies

.

3

Click

[OK]

.

•

The Printing window appears.

•

To stop the printing, click

[Cancel]

in the

Printing window.

•

Summary

Enter a summary of the recorded meeting here.

-

Title / Participants / Company / Manager /

Subject / Description:

Enter each item of the meeting.

-

Created On:

Automatically displays the date and time the IPB document was created.

-

Modified On:

Automatically displays the date and time the IPB document was updated finally.

•

Contact

Enter information to contact individuals for questions concerning the meeting here.

-

Name:

Enter the names of the person in charge of the meeting.

-

e-mail:

Enter the e-mail address of the person in charge of the meeting.

-

Home page:

Enter the home page of the person in charge of the meeting.


[B] Setting conditions when playing back the IPB document

1

Click

Play...

in the

Settings

menu.

• The Playback Setting window appears.

2

Enter an interval for playing back the stroke in the

Interval time between strokes

.

• You can click the arrows at the right and left of the scroll bar or drag the scroll bar to the right or left to set a desired interval.

[C] Setting the marker width, color or the eraser size

Change the width and color of the markers and the size of the eraser used in the View window or the

Whiteboard window. The marker width and color can be changed for four marker colors.

1

Click

Markers and Eraser...

in the

Settings

menu.

• The Marker / Eraser Setting window appears.

2

Change the width or color of markers, or width of the eraser.

•

Selected Page

:

Without check mark:

The first page through the last page are played back.

With check mark:

Only currently selected page is played back.

•

Loop Playback:

Without check mark:

Page(s) is played back once depending on the Selected Page setting.

With check mark:

Page(s) is played back repeatedly depending on the Selected Page setting.

Note

•

The playback interval can be set in a range of 0 - 2 seconds in 1 msec (millisecond = 1 /

1000 second) units.

•

The

Selected Page

and

Loop Playback

settings can be also changed from

Playback

Option

in the

Page / Play

menu.

•

Same Width

:

Width of all color markers can be set to the same width of the black marker by checking the check box.

•

Black / Red / Blue / Green

:

Width [1 - 30 dots (View window) / 0.1 - 25.4 mm (Whiteboard window)] or color of each marker can be set.

To change the width,

- Type the number of width.



To change the color,

Click the color of marker. Click the desired color from the Basic color palette in the Color window.

•

Highlight

:

The line becomes transparency by clicking it so the background can be seen.

67

68


•

Eraser Radius

:

The size of the eraser can be set from 1 to

60 dots (View window) or 0.1 - 50.8 mm

(Whiteboard window).

To change the size,

- Type the number of size.



3

Click

[OK]

.

• A window will appear where you can select whether or not to apply the new settings to handwritten lines drawn up to now.

4

Click

[All Strokes]

or

[New Strokes]

.

•

Clicking

[Yes]

will redraw the lines drawn up to that point using the new settings. Clicking

[No]

will only reflect the new settings for any subsequently drawn lines.

Note

•

The unit of the marker width and the eraser size is dots in the View window and millimeters or inches in the Whiteboard window.

•

When the marker color is changed, the color will be displayed on the bottom-right of the

Desktop Drawing Tool marker icon, but the marker tool color will not change.

•

If the background is dark and the drawn lines are hard to see when marker is highlighted, remove the check mark of the

Highlight

check box. When the line crosses with one of the different color, the cross point will become dark.

•

These settings are effective until being changed.

[D] Setting an image file when exporting or copying by dragging and dropping

It allows you to set the size when exporting a page to an image file and the file format to create when copying data to other applications by dragging and dropping a selected page area.

1

Click

Export Image...

in the

Settings

menu.

•

The Export Image Settings window appears.

2

Specify the export image setting.

•

[Export Image Files]

group

-

Image Size:

To change the size when saving a page as an image file, enter a desired width and height. Check the


check box when setting the aspect ratio of the page to an identical value.

-

JPEG:

To set the quality level when exporting a page as a JPEG format image file. The larger number will get higher quality for the image file than small number when exporting. However, the file size will be large.

-

TIFF:

To perform compression when exporting a page as a TIFF format image file, check the

Compression (PACKBITS)

check box.

•

[Drag and Drop Files]

group

Sets the file format to create when copying data to other applications by dragging and dropping a selected page area.

The following file formats can be selected.

Windows BMP (*.bmp), JPEG (*.jpg) or TIFF

(*.tif)

- If JPEG is selected, you can enter a quality level in

Quality

.

- If TIFF is selected, you can compress an image file by checking the

Compression

(PACKBITS)

check box.


3

Click

[OK]

.

Note

•

The default of the width is 800 dots and the


check box is checked. The height will be different depending on the size of the Panaboard screen and the screen resolution of the computer where the projector is projecting the image.

[E] Setting a work folder and the recovery file

Allows you to set the default folder when saving an

IPB document.

If it is set to automatically create a recovery file, previously saved IPB documents can be recovered when a power failure or other incident occurs.

1

Click

File...

in the

Settings

menu.

• The File Settings window appears.

2

Specify the file folder setting.

•

Save Default Folder

:

Sets the path of the folder you want to display as a default when saving a new IPB document.

•

Create Recovery File

:

To create a recovery file, check the check box.

-

Recovery File Folder:

To save the recovery file at the same folder as the original file, check the

Same folder as original file

check box. Otherwise, set the directory to save the recovery file.

-

Save automatically every # minutes:

To automatically save the recovery file, enter an interval time within a range of 1 -

120 minutes.

3

Click

[OK]

.

69

70


[F] Spell check setting for recognized handwriting

Set the spell check for recognized handwriting.

1

Click

Spell Check...

in the

Settings

menu.

•

The Spell Check Setting window appears.

2

Specify the spell check setting.

•

When checking the check box, possibly misspelled words are displayed with wavy underlining.

[G] Options setting

Allows you to set the display method of the file name in the Title bar, the display unit system and the Control

Panel key setting of the Interactive Panaboard in

Whiteboard mode.

1

Click

Options...

in the

Settings

menu.


2

Specify the option setting.

3

Click

[OK]

.

Note

• Only texts that is recognized using the handwriting recognition function can be checked the spelling.

•

Display full path in Title bar

:

To display the full path of the currently opened file in the title bar of the View window or the Whiteboard window, check the check box.

•

Measurement

:

Selects the length unit of the Whiteboard window.

•


:

A new page is added to the IPB document in

Whiteboard mode when the (Advance

Key) on the Interactive Panaboard is pressed.

•

Switch the current page in last 2 pages when Advance Key is pressed

:

The screen is fed and the corresponding page is selected in the IPB document in

Whiteboard mode every pressing the

(Advance Key) on the Interactive Panaboard.

It enables to copy (backup) the selected page of the IPB document by pressing the

(Copy Key) on the Interactive

Panaboard.


-

Make the current page empty after copy page is added

:

With check mark (default setting):

The selected page of the IPB document is copied and the selecting page is automatically erased as a new page (blank page) by pressing the (Copy Key).

When selecting this option, be sure to wipe to clear the Interactive Panaboard screen after pressing the (Copy Key).

Without check mark:

The selected page of the IPB document is copied by pressing the and the page is left as is.

(Copy Key)

-

Do not output copy page from

Panaboard printer when Copy Key is pressed.

:

With check mark:

The selected page of the IPB document is not printed when the (Copy Key) is pressed.

Without check mark (default setting):

The selected page of the IPB document is printed when the (Copy Key) is pressed.

•

No response

:

An IPB document it not influenced even if the

(Advance Key) on the Interactive

Panaboard is pressed.

3

Click

[OK]

.

Note

•

The computer screen will be projected onto the screen of the Interactive Panaboard in

Projector mode and because there is no physical size, the display unit system is only in pixels (dots) and cannot be changed.

•

The length unit millimeter or inch is used as unit to represent the page size on the status bar, pen width and eraser size.

71

72

Using the Panasonic-DMS


Scanning

You can scan images on the screen to your computer by operating Panasonic-DMS.

1

Click

[Start]

, move the pointer to

Programs

–

Panasonic

–

Panasonic Document

Management System

–

Document Manager

.

(For Windows XP,

All Programs

instead of

Programs

.)

•

The Panasonic-DMS software runs.

2

Click the

File

menu, then click

Select

Source...

.

3

Select

Panaboard UB-8 USB TWAIN Driver

and click

[Select]

.

4

Click the

File

menu, then click

Acquire

Image...

, or click the (scanner) icon on the

Toolbar.

•

The Panaboard Operation Panel appears.

5

Click the (Scan) button or the

(2-Screen Scan) button.

•

Scanning starts and the scanned image will be displayed on the screen of the computer.

It is also possible to start scanning using the

(Copy Key) or (2-Screen Copy

Key) on the electronic board.

6

Click

[Close]

on the Panaboard Operation

Panel to finish scanning.

• About the Document Manager, refer to the

Document Management System operating instructions in the CD-ROM.

Note

• Dragging the Panaboard Operation Panel using the mouse or activating other software programs during scanning may cause scanning troubles.

Note

• If the Panasonic Interactive Software is started, the Panaboard Operation Panel cannot be displayed. Close the Panasonic

Interactive Software and start it.

• When the Panaboard Operation Panel is not displayed, check the USB cable connection or the condition of the electronic board.


Panaboard Operation Panel

It is possible to perform the same operations as with the electronic board control panel (page 16) from the following

Panaboard Operation buttons.

Note

• While the Panaboard Operation Panel is displayed, the (Copy Key) and (2-Screen Copy Key) on the electronic board control panel are used for scanning images into the computer.

Panel Name

Contrast/

Remaining Film

Indicator

Description

This lamp indicator notifies the user when the time to replace the thermal transfer film is approaching (estimated) and of the contrast used during scanning or copying.

Indicator off: Normal scanning or copying contrast

Indicator on:

Indicator flashing*:

Darker than normal scanning or copying contrast

Almost time to replace the thermal transfer film

(Note that only about 15 more sheets may be copied when this indicator starts flashing.)

Replacement film (UG-6001) is separately available from the dealer where you purchased your unit.

* The flashing indicator will go out after the power is turned off, or the printer has been opened and closed. (When copying is performed, this indicator will begin flashing again.)

Contrast Button

Each time this button is pressed, the unit will alternate between normal and dark contrast modes (Normal/Dark).

2-Screen Scan

Button

This button scans the front and back of the screen on a single page.

Multi-Copy/

Error Indicator

Multi-Copy/Stop

Button

This indicator displays the number of copies to be made. The display changes each time the Multi-Copy/Stop Button is pressed.

Example: 1

→

2

→

···

→

9

→

1

→

···

When an error occurs, a flashing symbol will appear in this display to

indicate the error status. (See page 80.)

When making multiple copies, press this button until the desired number of copies is displayed on the Multi-Copy/Error Indicator. This button can also be pressed to stop copying while executing multiple copies.

•

The display changes as shown below each time the screen is copied.

After reaching 0, the display will reset to 1.

Example: 5

→

4

→

3

→

2

→

1

→

0

→

1

(Number is counted down.)

* If scanning, the setting 1 to 9 for the number of copies is ignored.

Scan Button

This button scans the screen.

Advance Button

Clicking this button advances the screen from right to left.

2-Screen Copy

Button

This button causes the front and back of the screen to be copied on a single sheet of paper.

73


Panel Name

Copy Button

Status Box

About Button

Close Button

Description

This button causes the screen to be copied.

The status box displays the status of the TWAIN driver and the electronic board.

Stand by

: The electronic board is stand by.

Both of the Panaboard Operation Panel and the electronic board control panel are operational.

Rotating

: The electronic board is rotating the screen.

Copying

: The electronic board is copying the screen.

Scanning

: The electronic board is now scanning the images on the screen.

Converting

: Indicates that the image data is being converted so that the

Busy

Error

:

: computer will be able to display the scanned data.

The electronic board is processing jobs.

An error has occurred with the electronic board.

Click to display information about the TWAIN driver.

Click to close the Panaboard Operation Panel.

74

Printing

To print documents from the computer to the printer, select the Print menu of the application software and select the printer name set when installing.

The standard printer name is “Panaboard-UB8 USB Printer (A4/Letter *)”.

* A4 or Letter changes with the models.

Note

•

The Multi-Copy/Error Indicator flashes when printing.

After printing, all the panel keys are disabled until the Multi-Copy/Error Indicator lights.

•

You cannot stop printing after printing starts. Do not attempt to stop printing.

•

Do not turn off the power of the electronic board or unplug the USB cable before printing finishes. It may cause the computer operation to become unstable.

•

A maximum 9 copies are available.

•

The output port can hold up to 10 sheets of copied paper. (Note that exceeding the output port’s capacity may result in paper jams.)

•

The Contrast Key is not effective for adjusting the contrast of print.

•

When printing almost black pages continuously uniform color density and light line streaks may appear. In such a case, try again after waiting a while.

•

When the unit falls in abnormal condition during printing, printing jobs (jobs in the spooler) may be lost. In such a case, print again.

Daily Care and

Maintenance

Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit.

Cleaning the Screen and the Unit

Gently wipe the screen film and unit with a waterdampened cloth that has been thoroughly wrung.

Daily Care and Maintenance

Caring for the Eraser

When the erasing surface of the eraser becomes dirty, hold down the sheet under the top sheet with your finger and peel off the dirty sheet (white or gray sheet) by pulling in the direction of the arrow.

White or gray sheet

Note

•

Use a commercially available white board cleaner for hard-to-erase stains.

(SANFORD® EXPO® white board cleaner etc.)

If you accidentally write on the screen with an oil-based marker, wipe with a small amount of ethyl alcohol.

•

Do not use thinner, benzine or cleaners containing abrasives as this may result in discoloration.

•

Do not wipe the screen film with a dry cloth as this may generate a static charge.

Note

• Be sure to peel off only one sheet; white or gray sheet of the eraser.

• When the eraser becomes thin, make sure that the corners of the eraser do not strike the screen during erasing as this may damage the screen.

Cleaning the Printer Head,

Platen Roller and Pick-up

Roller

If black streaks appear on the copy, clean the printer head and the platen roller.

If paper jams occur frequently, clean the pick-up roller.

1

Push down the printer open lever and open the printer door.

Printer door

75


2

Clean the Printer Head

Dampen the tip of a cotton-tipped swab in ethyl alcohol and gently wipe the printer head.

4

Install the thermal transfer film in its original position and close the printer door.

Latches

Cotton-tipped swab

Printer head

(Gold)

Note

•

Never touch the printer head or the surrounding area with your hands as this may disable copying.

3

Clean the Platen Roller and the

Pick-up Roller

Remove the thermal transfer film with both hands and carefully wipe any dirt or stains off the platen roller and pick-up roller.

Pick-up roller

Platen roller

•

For details on installing the thermal transfer

film, see pages 18.

•

Close the printer door firmly until a click is heard.

Note

•


•


76

•

For details on removing the thermal transfer

film, see page 22.

•

Dampen a soft cloth with neutral kitchen cleaner diluted in water, wring the cloth thoroughly, and wipe the entire surface of the rollers while rotating them. If this does not remove all dirt, wipe with a cloth dampened with ethyl alcohol.

Replacing the Batteries in the

Electronic Pen and the


As the lifetime of the batteries in the Electronic Pen or the Electronic Eraser comes near to the end, the message “Low Battery” appears on the computer screen to which the electronic board is connected using interactive functions. When this message appears, get new batteries ready and replace the old ones as soon as possible.

When replacing batteries, remove the old batteries and

replace according to step 1 under “Setting the

Electronic Pen” on page 25 in the case of the

Electronic Pen or according to “Setting the Electronic

Eraser” on page 26 in the case of the Electronic

Eraser. Continued use of low batteries may result in a shifting of position or malfunction.

For Brasil

Após o uso as pilhas / baterias contidas neste produto poderão ser dispostas em lixo doméstico.

For Taiwan

( 台灣 )

Replacing the Cloth of the


If the cloth of the Electronic Eraser becomes dirty with erased markings, replace with a new eraser cloth

according to “Replacing the Eraser Cloth” on page 26.


77

78

Troubleshooting

Troubleshooting

Treat problems according to the information given in the table below. If problems still persist, call your dealer for service.

Symptom Care and Remedy

See

Page

Power switch is on but the indicator is off.

Copied copy paper will not come out.

Nothing is printed on the paper or copies are faint or blurred.

Black streaks or blank (unprinted) spots appear on the copy (copy paper is dirty).

Check that the power plug is securely plugged in.

(If the indicator still does not light, turn the power off and on again.)

The unit is out of copy paper or thermal transfer film. (The Error

Indicator flashes “ ” or “ ”.)

Insert copy paper or replace the thermal transfer film.

The printer door is open. (The Error Indicator flashes “ ”.)


The paper cover is open.

Close the paper cover firmly until a click is heard.

Paper is jammed in the printer. (The Error Indicator flashes “ ”.)

Open the printer door and remove the jammed paper.

The platen roller and pick-up roller are dirty.

Open the printer door and wipe the platen roller and the pickup roller to clean them.

The markers for interactive (small) are used.

Use the markers (big).

The writing on the screen is too thin or light.

Make thicker, darker lines or change to a new marker.

The printer door is slightly open.


The printer head or platen roller is dirty.

Open the printer door and clean any dirt off the printer head and platen roller.

The thermal transfer film is wrinkled because it was set in place without removing excess slack.

Rewind the used portion of the thermal transfer film to remove the excess slack, then reattach it.

The unit is in strong sunlight or strong lighting.

Change the direction of the screen or block the light.

–

19

22

19

20

23

75

–

–

19

75

18

–

A black or white horizontal line appears, or the page prints in black or blank.

The screen does not advance when the Copy, Advance or

Reverse Key is pressed.

Contrast/Remaining

Film Indicator flashes.

When connecting a USB cable after installing the driver, the warning message is displayed to require the Panaboard UB-8

Driver Disk.

Static electricity was generated when the screen film was wiped.

Turn off the power and slowly move the screen by hand.

The time to replace the thermal transfer film is approaching. (Only about 15 more sheets may be copied.)

Prepare a new replacement film (UG-6001).

The necessary file is not found in Windows 98.

Click the location’s box and select the pass

“UB-8\UsbDrv\Win98-Me” in the pull down menu.

–

22

–

Troubleshooting

The software installed before is deleted from the Programs menu or cannot be used after installing the Panasonic-DMS.

Panasonic Document

Management System menu is remained in the Programs menu even if Panasonic-DMS is uninstalled.

The USB driver or printer driver does not work properly immediately after the installation of the software.

The computer does not recognize the electronic board.

The Electronic Pen position may shift when the Projector mode is used.

Data written on the electronic board may disappear from the electronic board screen and the computer screen or its position may shift when the interactive function is used.

Unnecessary streaks not written are displayed on the computer screen when the interactive function is used.

After the existing Panasonic-DMS software is uninstalled, the new

Panasonic-DMS is installed.

Install the new Panasonic-DMS again as follows.

1. Uninstall the current Panasonic-DMS.

2. Install the old Panasonic-DMS.

3. Install the new Panasonic-DMS in the same folder with the old one.

The old Panasonic-DMS is not uninstalled if the old version of the

Panasonic-DMS has been installed before installing the new one.

Uninstall the old Panasonic-DMS from the Add / Remove

Programs of the Control Panel. (Refer to “Removing the

Panasonic-DMS Software” on page 31 and remove

Panasonic-DMS instead of Panaboard UB-8 Software.)

The Panaboard has not been registered in [Control Panel]–

[Scanners and Cameras] and [Printers].

Uninstall the software (refer to “Removing Drivers / Interactive

Panaboard Software” on page 31) and install the software

again (refer to “Installing Drivers / Interactive Panaboard

Software” on page 28).

Check that the electronic board is in the condition that enables operation or that the USB cable is connected properly.

The electronic board is connected via a USB hub.

Do not connect via a USB hub.

When the interactive function is used, communication port setting is not appropriate.

Change communication port setting according to “Setting the

Communication Port” on page 35.

The projection position shifts.

Calibrate to reposition the projected image on the screen.

•

Use the Electronic Pen inclined at an angle.

•

Direct sunlight or strong light is striking the screen.

•

A remote controller is being aimed at the receiver on the electronic board.

•

The side of the electronic board is placed near the wall, or the top of the electronic board is placed near the ceiling.

•

The electronic board is placed near the vents of an air conditioner.

•

The receiver of the electronic board is blocked by a hand or other object.

•

The transmitter of the Electronic Pen or the Electronic Eraser is covered with your hand.

•

Two or more the Electronic Pens or the Electronic Eraser are used at the same time.

•

If the position shifts for reasons other than the above, adjust the

position according to “Adjusting the Shifted Position” on page 36.

Do not do the followings near the electronic board while using the interactive function.

•

Exchanging markers for interactive (small) of the Electronic Pen

•

Setting or removing a marker cap of the Electronic Pen

•

Pushing the point of the Electronic Pen

30-31

31

28

31

–

–

35

33

–

–

79

80

Troubleshooting

Detection of the marker color of the Electronic Pen does not work well when the Whiteboard mode of the interactive function is used.

The message "Low Battery" appears on the computer screen.

The marker for interactive (small) is not securely set.

Rotate the pen holder lever to the release position, and then return the pen holder lever to the lock position while inserting the marker until you hear a buzzing sound.

The proprietary marker for interactive (small) is not set into the pen holder.

Use the proprietary markers for interactive (small).

Replace batteries of the Electronic Pen or the Electronic Eraser which have “Low Battery” message displayed.

25

82

25

77

Meanings of Error Codes

The following table describes the meaning of each of the symbols which may flash in the Multi-Copy/Error Indicator.

Indication Cause Remedy

See

Page

25

Data transfer error Connect the USB cable securely.

(Error)

The screen will not move.

Turn off the power and slowly move the screen by hand.

(Screen)

The printer door is not closed securely.

Close the printer door securely.

(door)

(Jam)

Paper jam

Open the printer door and remove the jammed paper.

The thermal transfer film is slack, has run out or is not installed.

Remove the slack from the thermal transfer film, replace or install the thermal transfer film.

(ribbon)

Out of paper

(Paper)

The scanner or screen is in strong sunlight or strong lighting.

(Scanner Failure)

If other indications appear, call your dealer.

Load copy paper.

Change the direction of the screen or block the light.

–

19

23

18

22

19

–

Specifications

Specifications

Model No.

UB-8325

General

Power supply

Power consumption

(Operational)

Input

Block

Output

Block

Refer to the name plate on the printer

Refer to the name plate on the printer

External dimensions

(Height × Width × Depth, without stand)

Mass (without stand)

Ambient operating conditions

Ambient storage conditions

1,388 mm × 1,550 mm × 264 mm

(4

'

6 21 /

32

"

× 5

'

1 1 /

32

"

× 10

'

13 /

32

"

)

34.0 k g (75 lbs.)

Interactive Function

Temperature: 15–30 ° C (59–86

Humidity: 30–80% RH

°

F)

Other than Interactive Function

Temperature: 10–35 ° C (50–95


°

F)

Temperature: -20–60 ° C (-4–140


°

F)

Writing implements

PC interface

Dry erase felt-tipped markers (black, red, blue and green *)

* The green marker is only for the interactive function.

Full Speed USB 2.0 *

*This electronic board does not function with Hi-Speed

USB 2.0.

900 mm × 1,400 mm (2

'

11 7

[1664 mm (65 1 /

2

"

) diagonal]

/

16

"

× 4

'

7 1 /

8

"

) Panel dimensions

(Height × Width)

Panel surfaces

Panel advance system

Copying area (Height × Width)

Scanning system

2 screens

Endless scroll type

850 mm × 1,330 mm (2

'

9

Image sensors

15 /

32

"

× 4

'

4 3 /

8

"

)

Scanning resolution (Height × Width) A4: 1.6 x 1.7 dots/mm (40 x 43 dots/inch)

Letter: 1.7 x 1.6 dots/mm (43 x 40 dots/inch)

Printing system

Printing resolution

Copy paper

Copy paper size

Fusion thermal transfer type

8 dots/mm (203 dots/inch)

Standard or recycled paper [60 – 90 g /m 2

A4 / Letter* 1

(16 - 24 lb.)]

Copy color

Contrast adjustment

2-screen compressed copying

Time required for copying

Continuous copies

Paper empty indication

Black

Two levels: Normal/Dark

Yes

15 s/sheet

1 to 9 sheets

Yes

81

82

Specifications

Interactive

Function

Effective Area

(Height x Width)

Battery for Electronic Pen or

Electronic Eraser

Battery Longevity for Electronic Pen or Electronic Eraser

Projector mode: 850 x 1,330 mm (2

'

9

15

/

32

"

×

4

'

4

3

/

8

"

)

* The position cannot be detected within 50 mm (2”) of the upper screen border.

Whiteboard mode: 825 x 1,330 mm (2

'

8

15

/

32

"

×

4

'

4

3

/

8

"

)

* The whiteboard cannot not be written on within 50 mm

(2

"

) of the upper screen border and 25 mm (1

"

) of the lower screen border.

* It is not always possible to normally detect the position within 100 mm (3

15

/

16

"

) of the position receiver and

35 mm (1

3

/

8

"

) from the both sides of the screen.

LR03 (AAA size) x 2

*Alkaline battery

48 hours [Continuously at 25°C (77

°

F)]

* When using Panasonic

“LR03 (AAA size)” alkaline batteries.

Optional and Separately Available Items

Option

Stand: KX-BP065

Wall-mounting kit: KX-B063

Separately

Available

Items

Replacement film:

Markers (big):

UG-6001 (Set of 2 rolls [50 m (164

'

)])

KX-B031 (set of 10 black markers),

KX-B032 (set of 10 red markers),

KX-B033 (set of 10 blue markers)

Erasers: KX-B042 (set of 6 erasers)

Marker (big) and eraser set: KX-B035 (contains one black, one red, and one blue markers and one eraser)

For Interactive Pen holder:

Electronic Eraser:

Marker (small) set:

KX-BP038

KX-BP048

KX-BP0385 (contains one black, one red, one blue and one green markers)

Eraser cloth

(for Electronic Eraser): KX-BP0481 (set of 10 cloths)

*

1

Letter size is for U.S.A. and Canada models.

•

The markers (big) and the eraser are used for other than the interactive function.

•

The markers for interactive (small) are used while inserted in the pen holder.

The Electronic Pen [a marker for interactive (small) inserted in the pen holder] and the Electronic Eraser are used with the interactive function.

Installation Manual

(for qualified service personnel)

Table of Contents

page

For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

●

Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Assembling the Electronic Board . . . . . . . . . . . . . . . . . . . . . . . 85

●

Accessories for assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

●

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Electronic Board Operations Check. . . . . . . . . . . . . . . . . . . . . 89

●

Interactive Operations Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Repacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Assembling the Optional Stand (KX-BP065) . . . . . . . . . . . . . . 92

●

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

●

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Optional Wall-mounting Kit (KX-B063). . . . . . . . . . . . . . . . . . . 96

●

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

●

Wall-mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

●

Attaching the wall-mounting fixtures. . . . . . . . . . . . . . . . . . . . . . . . . 98

Before installing this set, please read this manual completely.

CLASS 1 LED PRODUCT

83

84

For Your Safety

To prevent severe injury and loss of life, read this section carefully before using the unit to ensure proper and safe operation of your unit.

The following graphic symbols are used in this

Installation Manual.

WARNING

Denotes a potential hazard that could result in serious injury or death.

CAUTION

Denotes hazards that could result in minor injury or damage to the unit.

This symbol is used to alert operators to a specific operating procedure that must not be performed.

These symbols are used to alert operators to a specific operating procedure that must be emphasized in order to operate the unit safely.

Notice

WARNING

Safety check must be done by qualified service personnel after installing this option.

Be sure to disconnect the power cord while installing the unit. Otherwise, it may cause electric shock or injury.

Be sure to use the specified parts for the installation. Otherwise, it may cause fire, electric shock or injury.

Notes in the operating instructions or notes of labels on the cabinet, chassis or parts should be observed.

CAUTION

Do not install the unit except by a qualified service personnel.

After installing or moving the electronic board, lock the casters and set the fallprevention extension legs.

Locking the casters

(Push this side)

Push to lock

If the unit is hung on a wall, confirm the wall must be capable of supporting at least the following weight.

1,005 N [103 k g f (227 lbs.)]

Do not attach the electronic board to mortared walls. Accidental electric leakage from the wall-mounting fixture bolts to metal laths or wire laths can cause heat, smoke or a fire.

Confirm the bolts of the unit are certainly caught by the wall-mounting fixtures by pulling the unit after hanging the unit on the wall-mounting fixtures if the unit is mounted on a wall.

Be sure to put on a glove to avoid electric shock or injury.

Assembling the Electronic Board

■

Accessories for assembling

The package includes the parts for setting up the electronic board shown below. Make sure that all of these parts are included in the package before proceeding.

No.

Part Name Illustration Q’ty

1

Remarks

Power cord

1 For wall-mounting

Wall-mounting template

85


■

Assembly

1

Assemble the optional stand or wall-mounting kit.

■

If you are using a stand, refer to page 92.

■

If you are using a wall-mounting kit, refer to page 96.

2

Remove the electronic board from the shipping box.

Remove the joints, then remove the electronic board from the shipping box.

Electronic board

Shipping box

Manuals, CD-ROM,

Eraser cloth (for Electronic Eraser)

Markers for Interactive

Thermal transfer film

Power cord

Batteries (6 pcs)

Pen holder (2 pcs)

Eraser

Markers

USB cable

Electronic Eraser

[Contents of Accessory Box]

Joints

Joints

86

Shipping box

Caution

•

Do not touch the screen film surface, as this may damage it.

•

The shipping box, cushioning material, and other packing material will be necessary if you ever need to repackage the electronic board, so do not throw them away.

3

Install the electronic board.

Install the electronic board using the stand (option) or wall-mounting kit (option).

■

Using the stand (option)

1) Hang the electronic board on the optional stand.


■

Using the wall-mounting kit (option)

1) Hang the electronic board on the optional wall-mounting fixtures.

A

B

2) Secure the wall-mounting fixture to the electronic board using the two wing-bolts

[M5 x 12 mm (15/32”)] provided with the

wallmounting kit (option)

.

•

The electronic board can be mounted

200 mm (7

7

/

8

”

) higher than hang position

A

by hanging it with the wing bolts

B

.

2) Secure the stand fixture to the electronic board using the two wing-bolts [M5 x 12 mm

(15/32”)] provided with the

stand (option)

.

Caution

•

When mounting the electronic board, avoid banging it. Such impact may break the internal light or cause other damage.

•

After mounting the electronic board, gradually apply weight to it to make sure that the wall is strong enough to support it.

87

88


4

Connect the power cord.

1) Securely fit the supplied power cord into the

AC inlet on the printer unit.

5

Wipe the screen film surface.

Soak a soft cloth with water, wring well, and wipe the screen film surface.

2) Fasten the power cord through the center cable holder, as well as the left or right cable holder depending on the location of the AC outlet (see below).

•

Left Location

When fastening through the left cable holder, fasten the power cord through the cable holders as shown below:

Caution

• Do not wipe the screen film surface with paint thinner, benzene, or cleaners that contain abrasives.

Doing so may cause discoloration.

• Do not wipe the screen film surface with a dry cloth.

Doing so may create static electricity.

6

Check operations.

Refer to “Electronic Board Operations Check” on page 89.

•

Right Location

When fastening through the right cable holder, fasten the power cord through the cable holders as shown below:

Electronic Board Operations Check

After assembling the electronic board, perform the procedures presented in the following table to make sure it functions properly.

Points to Check

Step

1

Turn on the power switch.

Symptom

“ ” flashes after “ ” lights up.

(If not)

“ ” flashes.

(If not)

Solutions

(Normal operation)

Check power cord. (See step

4 on page 88.)


Check thermal transfer film.

2

Open the printer door and attach the accessory thermal transfer film, then close the printer door.

•

Installing Thermal Transfer Film procedure (refer to the Operating

Instructions on page 18)

3

Open the paper cover and insert ordinary A4 (Letter) test paper, then close the paper cover.

•

Loading Copy Paper procedure

(refer to the Operating

Instructions on page 19)

4

Open the printer door.

“ ” lights up.

(If not)

“ ” flashes.

(If not)


Check copy paper.

5

6

Close the printer door.

Press .

“ ” lights up.

(If not)


* 1


* 1


*

1

7

Use the accessory marker to draw a large filling the entire copyable area of the screen film surface.

•

Copyable area (refer to the

Operating Instructions on page

11)

Screen is fed.

The screen film surface is not fed smoothly.

There are strange noises.

“ ” lights up and three copies are made.

Three copies are not made.

The entire readable area is not printed.

There are strange noises or paper jams during the copying process.

Multiple sheets of paper are fed through at the same time.


*

1

8

9

Press .

Press to move the screen film surface. Write letters, etc. with the marker.

Press .

Press

The Contrast/Remaining Film indicator light is turned on and one copy is made.

The Contrast/Remaining Film indicator light is not turned on.

The image is not copied properly.

There are strange markings on the copy sheet

(e.g., stripes or lines).

The Contrast/Remaining Film indicator light is turned off.

(If not)


*


*

1

1

89

90

Electronic Board Operations Check

10

Press .

Step

Symptom

Two screens are copied properly.

(If not)

Points to Check

Solutions


*

1

*

1

Contact the store or dealer from which the unit was purchased.

■

Interactive Operations Check

1

Install the software on the computer and connect the supplied USB cable according

to “Installing Drivers / Interactive Panaboard Software” on page 28.

2

Check that the interactive function operates.

•

If the Electronic Pen position shifts, adjust the position according to the instructions on page 36.

Repacking

Perform Assembly Steps 2 through 4 on pages 86 - 88 in reverse to repack the electronic board and accessories.

Use the joints to fasten the shipping box.

Electronic board

Shipping box

Manuals, CD-ROM,

Eraser cloth (for Electronic Eraser)

Markers for Interactive

Thermal transfer film

Power cord

Batteries (6 pcs)

Pen holder (2 pcs)

Eraser

Markers

USB cable

Electronic Eraser

[Contents of Accessory Box]

Joints

Joints

Caution

•

Do not touch the screen film surface, as this may damage it.

Shipping box

91

92

Assembling the Optional Stand (KX-BP065)

.

■

Accessories

The package box for the optional stand includes the parts noted below; please confirm that all parts are present before beginning installation

No.

Part name Illustration Q’ty No.

Part name Illustration Q’ty

Stand base 2 Wing bolt 6

M5 x 12 mm ( 15 /

32

”

)

Pipe 2

Support bracket

2

Cover 2

Fall-prevention extension leg

4

Side bar (A) 2 Screw 4

M6 x 60 mm (2 3 /

8

”)

Side bar (B) 1 Nut 4

*

1

Screw 12 Wrench 1

M8 x 45 mm (1 25 /

32

”)

Fixture

(left)

2

Wing bolt

(Not use*

2

)

8

M4 x 8 mm (

5

/

16

”

)

Fixture

(right)

2

Screen holder bracket

(Not use* 2 )

4

* 1

* 2

The accessory wrench is required to fasten or loosen the screws , ; please store it carefully for future use.

These are used for other models.

●

Before assembly, be sure to lock the casters.

Locking the casters

(Push this side)

Releasing the lock


■

Assembly

1

Assembling the stand

■

Assembling the fall-prevention extension legs

The fall-prevention extension legs increase the safety of the electronic board.

Fall-prevention extension legs

•

Caster locks are attached to the back side.

Caution

•

Install and always set the fall-prevention legs when using the stand.

•

When tightening the screw , hold the nut with pliers.

Note

•

When folding back the fall-prevention extension legs, release the lock as follows.

1

2

1

■

Inserting the covers to the pipes

93

94


■

Assembling the stand

1

Assemble with the holes toward the front.

Locking casters side

(rear)

1

1

2

Pull the fall-prevention extension legs down (fall-prevention extension legs will be fixed by the lock pin.)

Locking casters side

(rear)

Note

*

1

Do not tighten the screw too much. This may deform the pipes.

2

Attach


3

Assemble and install the electronic board.

Refer to step 3 on page 87.

95

Optional Wall-mounting Kit (KX-B063)

Before attempting installation of this wall-mounting kit, we strongly recommend consulting with the building manager, engineer, or architect. The installer needs to know the type of construction used for the wall intended for this installation and the location of wall studs. Selection of hardware is critical for safe wall-mounting, and depends on the nature of wall construction. Installation should not occur until this consultation takes place.

Caution

•

Do not attach the electronic board to mortared walls. Accidental electric leakage from the wall-mounting fixture bolts to metal laths or wire laths can cause heat, smoke or a fire.

1. Tools required:

A minimum of eight (8) pieces of appropriate wall-support hardware (molley, toggle, etc.)

NOTE: THIS HARDWARE MUST BE LOCALLY PROCURED, IT IS NOT INCLUDED IN THE KIT.

Drill (and drill bit of correct size) for hardware installation

Screw driver (Both phillips (+) and slotted (–) will be required.)

Tape measure

Tape or thumb-tacks (2 pcs)

Bubble type level

2. Pre-requisites

1. Before installation, make sure that the wall intended for installation is capable of supporting flushmounted.

UB-8325 is 103 k g f (227 lbs.).

2. The position of the intended installation is of adequate size for the selected Panaboard.

UB-8325 is 1,516 mm (H) × 1,550 mm (W) [5

'

(H) × 5

'

2

"

(W)].

3. An outlet is within 3 m (9

'

10 1 /

8

"

), and not located behind the Panaboard.

■

Accessories

The package box for the optional wall-mounting kit includes the parts noted below; please confirm that all parts are present before beginning installation. Eight screws for mounting the fixtures on the wall are not provided. Please

purchase the appropriate wall-mounting hardware (sold in stores). Refer to page 98.

No.

Part name Illustration Q’ty No.

Part name Illustration Q’ty

Wall-mounting fixture L

2

Screw

(Not use*)

4

M4 x 16 mm (

20

/

32

”

)

Wall-mounting fixture R

2


(Not use*)

Use the wallmounting template provided with

UB-8325.

1

96

Wing bolt

M5 x 12 mm (

15

/

32

”

)

(For mounting of the electronic board)

*These are used for other models.

2


■

Wall-mounting procedure

1

Confirm that the wall is strong enough to support the weight of the electronic board.

Caution

The wall must be capable of supporting at least

1,005 N [103 k g f (227 lbs.)] for UB-8325.

2

Tape the Wall-mounting template on the wall.

• Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included with the electronic board (UB-8325).

• When taping the template on the wall, make sure it is level.

3

1) Drill holes in the wall for the wall-mounting fixtures (8 holes total).

• Holes on the wall-mounting fixture are 7 mm ( 1 /

4

"

) in diameter.

2) After removing the wall-mounting template, attach the wall-mounting fixtures with the appropriate wall-mounting hardware (two screws in each fixture).


(

provided with UB-8325

)

(See page 85.)

812.

8 mm

(2' 8")

1


2

Wall-mounting fixture R

Wall-mounting hardware*

1


Wall-mounting hardware*

70 mm

406.4 mm

(2

/

4

")

(16

")

Center of the electronic board

* This hardware must be locally procured, it is not included in the kit.

•

Refer to the section “Attaching the wall-mounting fixtures” (page 98) for drilling in the wall and attaching the

mounting fixtures.

•

Refer to step 3 on page 87 for mounting the electronic board.

97

98


■

Attaching the wall-mounting fixtures

The electronic board must be mounted with the method most suited to the material of the wall.

Three methods are presented here.

(Other options may be available in your area.)

●

Attaching to metal or concrete walls

Stud plugs (sold in stores) are needed.

Drill bit

Metal or concrete wall

Stud plug

Insert a stud plug in each hole.

Drill eight holes in the wall.

For the correct hole size, refer to the instructions for the particular stud plugs used.

Wall-mounting fixture

Bolt

Insert each bolt through a hole in the wall-mounting fixture and tighten until the wall-mounting fixture is securely fixed to the wall.

●

Attaching to plasterboard walls

Split-wing toggles (sold in stores) are needed.

Split-wing toggle

Plasterboard


Bolt

Arms

Arms


Insert each bolt through a hole in the wall-mounting fixture and into the hole in the wall beneath so that the arms of the splitwing toggle are horizontal. For the correct hole size, refer to the instructions for the particular split-wing toggles used.

After the arms expand, pull the wall-mounting fixture out until the arms of the split-wing toggle grip firmly into the wall.

Tighten each bolt until the wallmounting fixture is securely fixed to the wall.

●

Attaching to wooden walls

Use wood screws (sold in stores).


Wood screw For the correct hole size, refer to the instructions for the particular wood screws used.

Wooden wall

99

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)

This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product.

Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Panasonic Digital Document Company,

Unit of Panasonic Corporation of North America

Two Panasonic Way, Secaucus, New Jersey 07094

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario, L4W 2T3

Panasonic Business Systems U.K.

A Division of Panasonic U.K. Ltd.

Willoughby Road, Bracknell, Berkshire, RG12 8FP

Panasonic Marketing Europe GmbH

Hagenauer Strasse 43

65203 Wiesbaden, Germany

Matsushita Electric Industrial Co., Ltd.

http://www.panasonic.co.jp/global/

© 2005 Panasonic Communications Co., Ltd. All Rights Reserved.

Printed in Malaysia

PJQXC0073ZA-F

F1205B0