Panasonic | Smoke Alarm 6367 | User manual | Panasonic Smoke Alarm 6367 User manual

Panasonic Smoke Alarm 6367 User manual
Fire alarm systems
Duct detector
chamber
6367
•
•
Only one pipe is required
Simple installation
•
For conventional as well as analog and addressable systems
General
The Uniguard Duct detector chamber 6367
is used when smoke is to be detected in a
ventilation duct. Both the "venturi pipe" and
the housing, where a smoke detector is to be
placed, are especially designed for optimum
airflow through the detector. The housing is
made of grey ABS and the venturi pipe is
made of aluminium. Supplied with two
compression glands for cable entry.
6367 can be used in conventional as well as
analog fire alarm systems, depending on the
detector placed inside the housing.
The Photoelectric smoke detector 4352,
plugged in the base 2324, is used in a
conventional system (zone line input). An
attached space ring (11 mm) is required
between the base and the housing.
The Analog photoelectric smoke detector
4301, plugged in the analog base 3312, is
used in an analog and addressable system.
An attached space ring (19 mm) is required
between the base and the housing.
Venturi pipe 6371
The venturi pipe is available in three lengths
and can easily be shortened to suit the
ventilation duct. An attached plug is to be
placed in the end of the pipe.
A ventilation duct with a width < 0.6 m
(diameter) requires a 0.6 m venturi pipe
(6371-06), ended inside the duct.
A ventilation duct with a width > 0.6 m
(diameter) requires an 1.5 or 2.8 m venturi
pipe (6371-15 / -28), ended outside the duct.
See figure on the opposite page.
Air flow indicator
A built-in air flow indicator gives a
confirmation that the air from the ventilation
duct is flowing through the venturi pipe and
the detector. If not, a booster fan 6373 is
available as an option.
Accessories
Bracket 6372, to be used when 6367 shall be
mounted on a round ventilation duct. See
figure on the opposite page.
Booster fan 6373, to be used when the air
flow indicator is indicating no or very small
air flow. The fan shall be mounted inside
the housing and connected to the terminal
block. External power supply (24 V AC, 50
mA) is required.
Filter 6374, can be used in an extremely
dirty environment, as in a saw mill, a timber
yard, etc. The filter shall be placed inside
the housing, in a slot just before the detector.
Product applications
The Duct detector chamber can be used in
the systems EBL500 / 512 / 128 / 1000 /
2000. It is intended for indoor use and in
dry premises.
Panasonic Electric Works Fire & Security Technology Europe AB
Citadellsvägen 23, SE-211 18 Malmö, Sweden
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99
info@mfstech.com • www.panasonic-fire-security.com
Type numbers
6367
6371-06
6371-15
6371-28
6372
6373
6374
Duct detector chamber (NOTE! Detector & base have to be ordered
separately).
Venturi pipe 0.6 m (Incl. end plug.)
Venturi pipe 1.5 m (Incl. end plug, plastic gasket and membrane gland TET
26-35.)
Venturi pipe 2.8 m (Incl. end plug, plastic gasket and membrane gland TET
26-35.)
Bracket
Booster fan (ext. 24 V AC, 50 mA required)
Filter
6367 can be mounted vertical or
horizontal on the duct and
3 x the duct diameter before or
5 x the duct diameter after a
disturbance (i.e. a bend, a filter or
a damper.
Left: How to suit the pipe to different widths of the ventilation duct. Right: The Bracket 6372.
Attached with each Duct detector chamber are detailed mounting and installation instructions.
Technical data
Duct air flow velocity (m/s)
0.2 to 15
Ambient temperature (°C)
operating
storage
-10 to +50
-25 to +75
Ambient humidity (% RH)
max. 95, non condensing
Ingress Protection rating
IP54
Size L x W x H (mm)
287 x 150 x 110 (the housing only)
Weight (g)
680 (the housing only)
Construction / Colour
ABS / Grey (RAL7035)
Compression glands
M16x1.5 for cable Ø=3-10 mm
Approvals
CE; EN 54
See also Product Leaflets / Technical data for the base and the detector to be used.
All technical features and data are subject to changes without notice, resulting from continuous development and improvement.
Product Leaflet
Date of issue
Revision / Date of revision
MEW00435
2004-02-05
2 / 2006-08-31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising