Radio Shack Telephone 43-811 User manual

Radio Shack Telephone 43-811 User manual
READ THIS FIRST
We have designed your telephone to conform to federal
regulations and you can connect it to most telephone
lines. However, each device you connect to the phone
line draws power from it. This power draw is the device’s
Ringer Equivalence Number, or REN. The REN is shown
on the bottom of your phone.
If you are using more than one phone or other device on
the line, add up all the RENs. If the total is more than five
(or three in rural areas) your phones might not ring. If
ringer operation is impaired, remove one of the devices
from the line.
If your phone causes problems on the phone line, the
telephone company can disconnect your service. The
phone company tries to notify you in advance. If advance
notice is not practical, the telephone company notifies
you as soon as possible and advises you of your right to
file a complaint with the FCC.
The phone company can also make changes to its lines,
equipment, operations, or procedures that could affect
the phone’s operation. The phone company notifies you
in advance, so you can take the necessary steps to prevent interruption of your phone service.
FCC STATEMENT
Your telephone complies with Part 68 of FCC Rules. You
must, upon request, provide the FCC registration number and the REN to your telephone company. These
numbers are shown on the bottom of your phone.
Note: You must not connect your telephone to:
• Coin-operated systems
• Party-line systems
• Most electronic key phone systems
CARE
• Keep the phone dry.
• Handle the phone carefully. Do not drop it.
RadioShack Limited Warranty
This telephone product is warranted against manufacturing
defects in material and workmanship for one (1) year from the
date of purchase from RadioShack company owned stores and
authorized RadioShack franchisees and dealers. Within this
period bring your RadioShack sales slip as proof-of-purchase
date to any RadioShack store.
This warranty does not cover damage or failure caused by or
attributable to Acts of God, abuse, misuse, improper or abnormal usage, faulty installation, improper maintenance, lightning
or other incidence of excess voltage, or any repairs other than
those provided by a RadioShack Authorized Service Facility, or
transportation costs. RadioShack is not responsible or liable
for indirect, special, or consequential damages arising out
of or in connection with the use or performance of the
product or other damages with respect to loss of property,
loss of revenue or profit, or costs of removal, installation or
reinstallation.
EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES
ARE LIMITED IN DURATION TO THE DURATION OF THE
WRITTEN LIMITED WARRANTIES CONTAINED HEREIN.
Some states do not allow the limitation or exclusion of incidental
or consequential damages and some states do not allow limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
There will be charges rendered for repairs to the product made
after the expiration of the aforesaid one (1) year warranty
period.
Krystalite
Neon Phone
n Neon Light
n Tone or Pulse (Rotary) Dialing
n Redial
n Flash
n Ringer Switch
n Hold Button with Indicator
n Hearing-Aid Compatible
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
We Service What We Sell
• Do not use or store the phone in temperature
extremes.
10/95
• Keep the phone away from dust and dirt.
• Do not modify or tamper with the phone’s internal components. Doing so might invalidate the phone’s warranty and void your FCC authorization to operate it. If
the phone is not operating as it should, take it to your
local RadioShack store for assistance. If the trouble is
harming the phone lines, the phone company might
ask you to disconnect the telephone until you fix the
problem.
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
7A6
Printed in China
Owner’s Manual
Cat. No. 43-811
CONNECTING THE PHONE
USING THE PHONE
Switch to TONE or PULSE to match
the type of service you have.
Set RINGER ON/OFF to ON to
have the ringer sound when you
receive a call or to OFF to silence
the ringer. You can still make calls
with the ringer off, and you can
receive calls if you hear another
phone on the same line ring.
If you have pulse (rotary) service,
you can switch to TONE during a
call to use tone services.
You can set LAMP/LOW/HI/OFF to:
• LOW for a dim glow.
Route supplied adapter through strain-relief slot.
• HI for a bright glow.
Note: The adapter powers the light.
• OFF to turn off the neon light.
Cautions:
Notes:
• Always unplug the adapter from the AC outlet before
you unplug the other end from the phone.
• You must use an adapter that supplies 12V and delivers at least 500 mA. Its center tip must be set to positive, and its plug must correctly fit the phone’s DC 12V
jack. Using an adapter that does not meet these specifications could seriously damage the phone or
adapter.
• Regardless of the lamp switch setting, the neon light
turns off when you pick up the handset, and flashes
when the phone rings.
• It is normal for your new neon lamp to occasionally
flicker when you first use it. If it flickers, set LAMP/
LOW/HI/OFF to OFF for 1 minute, then set the switch
to HI or LOW to turn the neon lamp on again. This
should steady the lamp’s glow.
Press REDIAL to dial the last number dialed (up to 31 digits).
Press FLASH to produce a timed
switchhook signal for special services such as call waiting.
Note: The redial memory does not
store a FLASH entry or any keys
you press after FLASH.
Note: If you do not subscribe to
any special services, pressing
FLASH might disconnect the call.
Note: The phone company charges to install any necessary jacks. The USOC number of the jack to be installed
is RJ11C .
Press to disconnect a call.
The indicator lights when a
call is on hold .
CAUTION
Press HOLD to hang up the handset
without disconnecting the call. To
release a call from hold, lift the
handset or press and hold the
switchhook for 1 second.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important operating and servicing
instructions included in the papers with
the telephone.
Plug the handset cord into the
jacks on the handset and base.
Note: Do not press FLASH to
release a call from hold.
 1996 Tandy ÐÐ
Corporation.
All Rights Reserved.
RadioShack is a trademark used by Tandy Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement