RCA CRT Television 27F524T User’s Guide

Add to my manuals
2 Pages

advertisement

RCA CRT Television 27F524T User’s Guide | Manualzz
CRT TELEVISION
Choose Your Connections
START
GUIDE
Make your connection decision easier by taking a few minutes to review the jacks on your new
TV. Compare the jacks on the device you want to connect and see if the same jacks are available
on your TV. Then refer to the chart below to determine the best connection to make.
For more information about connecting your TV to other devices, refer to the User’s Guide that
can be found in the support section on www.rca.com/television. Make sure you read the safety
information provided separately before you connect and operate your TV.
www.rca.com/television
Jacks
Quality
Connects to...
COMPONENT
(CVID) INPUT
Cables needed
Devices with Y Pb Pr
(component) outputs, such as,
HD Receivers, Satellite
Receivers, Cable Boxes, DVRs,
and DVD Players (Progressive
Y
Pb
Component
Video
Audio
Scan players- refer to the User’s Guide
for more information).
Pr
COMPOSITE
(VID) INPUT
Devices with Video (composite)
outputs, such as DVD Players,
VCRs, Satellite Receivers,
Cable Boxes, Camcorders, and
Digital Cameras.
VIDEO
(not included)
Video
Audio
Model 27F524T has an S-Video connection on the side panel. (HH) Remember to connect the R/L Audio jacks available in this location.
RCA and associated marks are trademarks of THOMSON S.A. used under license to TTE Corporation.
Remember: The Component (CVID) and the Composite (VID) jacks share the same R/L Audio jacks shown above.
Connect a Signal Source
or
OUT TO TV
Cable Box, Satellite
Receiver, or Wall Outlet
Outdoor Antenna
Indoor Antenna
Connect your TV to cable; a cable box or satellite
receiver; or an antenna in order to receive TV
channels. Connect the cables as shown in the first or
second connection.
If you’re connecting a cable box or satellite receiver
and it has Component jacks (Y Pb Pr), connect the
cable box or satellite receiver to your TV using the
Component jacks (CVID) for a better connection.
-ORANTENNA/CABLE
INPUT
ANTENNA/CABLE
INPUT
DIGITAL/ANALOG
DIGITAL/ANALOG
TV
(Back Panel)
TV
(Back Panel)
Continue to Step 2, Set Up Your TV, on the back
page.
We help improve our environment by printing only this one page of instructions. The complete User’s Guide is available at the support section on
www.rca.com/television.
Español- Ayudamos a mejorar nuestro ambiente imprimiendo sólo esta página de instrucciones. La Guía de Inicio Rápido en Español y la Guía del
Usuario completa se encuentran disponibles en la sección de soporte en www.rca.com/television.
Français- Nous aidons à améliorer l’environnement en imprimant cette seule page d’instructions. Le Guide de démarrage rapide et le Guide de
l’utilisateur sont disponibles en Français dans la section du soutien, sur le site Web www.rca.com/television.
Set Up Your TV
First, make sure you have connected your TV to any devices, connected a signal source, plugged
in the TV, and put batteries in the remote.
• Now, turn on the TV and begin the setup.
• Set the Menu Language. The default menu language is set to English. To choose another language,
press the MENU button, highlight Setup, then press OK. Go to Language and press the right arrow
button to choose another language. Press MENU to return to the previous menu or CLEAR to exit.
SETUP
Go Back
Auto Ch. Search
tu ...
List & Labels
...
AUTO CHANNEL SEARCH
Closed Caption
...
Favorite
CH
...
Go Back
Language
English...
Signal Type
Antenna...
Start
Format
4:3 Running...
Analog Channel
0
Search Percent
0
Digital Channel
0
• Set the Signal. From the Setup menu, highlight Auto Channel Search and press the right arrow
button. Signal Type is highlighted. Press the right arrow button to select Cable or Antenna. Press
the down arrow button to highlight Start.
Search Channels. Press the right arrow or OK button to start the channel search. (This might
take 10-15 minutes). Once the search is complete, the List and Labels menu is displayed. Go to
the next step to set the time, or go Step 3 Operate Your TV for more information.
• Set the Time. From the Main Menu, press the down arrow button to highlight Time and press
OK. Use the number buttons to set the time manually. If it’s 7:25, for example, press 0 and then
7. To change the minutes, press 2 and then 5 to complete the minutes. You can also use the right
arrow button to start the time at 12:00 am. Then, each additional right arrow press adds a minute.
Press the left arrow button to subtract minutes. The OK button selects AM or PM. Press CLEAR
to exit.
Operate Your TV
Viewing Devices Connected to Your TV
+•?
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
INPUT
To view devices connected to your TV, use the INPUT button until the input name appears that
matches the input of the device you connected. Your choices are VID (composite input), CVID
(component input) and FRNT (front input). Some models have SVID (S-Video input).
DIG•ANA
DIG•ANA
To access the menu system, press the MENU button. Use the arrow buttons to navigate and the
OK button to change selections. Here are some features you might want to use:
FAV
MENU
CH LIST
ZOOM–
Using the Menu System
ZOOM+
GUIDE
Remember: The DIG•ANA
button switches between analog or
digital stations. Analog channels
are sent in 4:3 (Standard) format.
Most digital channels are sent in
16:9 (Widescreen) format.
• Deleting Channels. After running the channel search there might be channels you don’t want in
the channel list. To delete a channel, press MENU, highlight Setup and press OK. Highlight List &
Labels and press OK. Make sure Channel is highlighted, then press the right arrow button to select
the channel. Highlight In List and press the right or left arrow button to uncheck the box. Repeat
to delete other unwanted channels. Press CLEAR to exit.
• Changing the Screen Format. Your remote has buttons you can use to change the format of
your picture. Press the left arrow/ZOOM- and right arrow/ZOOM+ buttons to choose different
screen formats (4:3, 16:9 or Stretch). The User’s Guide has more information.
• Saving a Favorite Channel. To store a favorite channel, press MENU, highlight Setup, and press
OK. Highlight Favorite CH and press OK. Press the left or right arrow button to select the signal
type (Analog or Digital). Press the down arrow to highlight Fav 1. Use the right and left arrow
buttons to scroll to your favorite channel. Continue to use this method to add favorite channels.
To quickly access a favorite channel while watching TV, press the FAV button.
• Locking the Front Panel. Locking the front panel is convenient to keep children from using the
front panel buttons. Press MENU, highlight Parental Control and press OK. Choose lock (R) and
create your password so that your choice is activated. Highlight Settings and go to Lock Fr. Panel.
Press the right or left arrow button to choose lock (R). For more information on features, refer to
the User’s Guide that can be found in the support section on www.rca.com/television.
Thank you for your purchase. Before making a trip back to the retailer, please visit www.rca.com/television for more information or contact us at
1-800-336-1900 so that we may assist you in operating the unit, replacing missing parts, and ensuring your satisfaction with the product.
TOCOM 16743670

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement