Toshiba Car Video System SD900KY User manual

Toshiba Car Video System SD900KY User manual
Introduction
DIGITAL VIDEO
DVD PLAYER
SD900KY
OWNER’S MANUAL
Connections
Basic playback
Advanced playback
Function setup
Others
© 2009 Toshiba Corporation
2
11
16
19
30
37
Introduction
SAFETY PRECAUTIONS
The symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
CAUTION: VISIBLE LASER RADIATION WHEN
OPEN. DO NOT STARE INTO BEAM.
AVIS
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this
owner’s manual.
The symbol for Class
(Double lnsulation)
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING:
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as
vases, shall be placed on the apparatus.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future
reference. Should the unit require maintenance, contact an authorized service location.
Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
WARNINGS:
• The main plug is used as disconnect device and it should remain readily operable during intended
used. In order to disconnect the apparatus from the mains completely, the main plug should be
disconnected from the mains socket outlet completely.
• The mains plug of apparatus should not be obstructed OR should be easily accessed during intended
use.
• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilations.
• The ventilation should not be impeded by covering the ventilation openings with items such as newspaper,
table-cloths, curtains, etc.
• No naked flame sources such as lighted candles should be placed on the apparatus.
• The use of apparatus in moderate climates.
Location of the required label
The rating plate and the safety caution are on
the rear of the unit.
2
CLASS 1
LASER PRODUCT
IMPORTANT SAFETY INSTRUCTIONS
9.
10.
11.
12.
13.
Read these instructions.
Keep these instructions.
Read all warnings.
Follow all instructions.
Do not use this appliance near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Portable Cart Warning
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Introduction
1.
2.
3.
4.
5.
6.
7.
8.
ADDITIONAL SAFETY INSTRUCTIONS
14. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire
or electric shock.
15. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled
with liquid, or candles on top of the unit.
16. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
17. Do not place anything on top of this unit.
18. Do not place the apparatus on amplifiers or equipment that may produce heat.
19. Never block or cover the slots or openings in the unit.
Never place the unit:
• on a bed, sofa, rug or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.
The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation.
20. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal
injury and apparatus malfunction.
21. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet.
Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
22. During thunderstorms, do not touch the connecting cables or the apparatus.
23. Warning: To prevent spread of fire, keep candles or other open flames away from this product at all times.
3
Introduction
Precautions
Notes on handling
When shipping the DVD player, the original shipping
carton and packing materials come in handy. For
maximum protection, repack the unit as it was originally
packed at the factory. Take care not to give it a shock
or shake when carrying.
Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic products
in contact with the DVD player for a long time. They will
leave marks on the finish.
The top and rear panels of the DVD player may become
war m after a long period of use. This is not a
malfunction.
When the DVD player is not in use, be sure to remove
the disc and turn off the power.
If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
Notes on locating
Place the DVD player on a level surface. Do not use it
on a shaky or unstable surface such as a wobbling
table or inclined stand. The loaded disc may come off
the proper position and cause damage to the DVD
player.
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD
player away from the TV, radio, or VCR.
Notes on moisture condensation
Moisture condensation damages the DVD player. Please
read the following carefully.
Moisture condensation occurs, for example, when you pour
a cold drink into a glass on a warm day. Drops of water
form on the outside of the glass. In the same way, moisture
may condense on the optical pick-up lens inside this unit,
one of the most crucial internal parts of the DVD player.
Moisture condensation occurs during the following
cases.
When you bring the DVD player directly from a cold
place to a warm place.
When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD player in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it
dry.
Do not use any type of solvent, such as thinners and
benzene, as they may damage the surface of the DVD
player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Inspection and Maintenance
This DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts become dirty
or worn down, the picture quality may be reduced. To
avoid reduction in picture quality, it is recommended that
regular inspection and maintenance (cleaning or parts
replacement) be performed every 1,000 hours of use. For
further details, contact your nearest consumer electronics
dealer.
4
Do not use the DVD player when moisture condensation
may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player, and leave it for two or
three hours. After two or three hours, the DVD player
will have warmed up and evaporated any moisture. Keep
the DVD player connected to the wall outlet and
moisture condensation will seldom occur.
Notes on Discs
Structure of disc contents
Do not touch the playback side of the disc.
Introduction
On handling discs
Normally, DVDs are divided into titles, and the titles are
sub-divided into chapters. VIDEO CDs and audio CDs are
divided into tracks.
DVD
DVD
Title 1
Playback side
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Do not attach paper or tape to discs.
VIDEO CD/audio CD
VIDEO CD/audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc clean.
Each title, chapter or track is assigned a number, which is
called “title number”, “chapter number” or “track number”
respectively.
There may be discs that do not have these numbers.
Notes on copyright
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for
vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
The unauthorized recording, use, distribution, or revision of
copyrighted materials including, without limitation, television
programs, videotapes, and DVDs, is prohibited under the
Copyright Laws of the United States and other countries,
and may subject you to civil and criminal liability.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
5
Introduction
Notes on Discs (continued)
About this owner’s manual
Playable discs
This owner’s manual explains the basic instructions of this
DVD player. Some DVDs are produced in a manner that
allows specific or limited operation during playback. As
such, the DVD player may not respond to all operating
commands. This is not a defect in the DVD player. Refer
to instruction notes of discs.
This DVD player can play the following discs.
Disc Mark
Contents
Disc
Size
Approx. 4 hours
(single sided disc)
12 cm
” may appear on the TV screen during operation.
“
” means that the operation is not permitted by the
A“
DVD player or the disc.
Audio
+
video
(moving
pictures)
DVDs
8 cm
Approx. 160 minutes
(double sided disc)
The
icons on the heading bar show the playable
discs for the function described under that heading.
DVD : You can use this function with DVD video discs.
: You can use this function with Video CDs.
: You can use this function with Audio CDs/CD-R/RW
CD
CDs.
Notes on region numbers
VIDEO
CDs
DIGITAL VIDEO
Audio
CDs
Audio
+
video
(moving
pictures)
Audio
The region number of this DVD player is 4. If region
numbers, which stand for their playable area, are printed
4
or
, disc
playback will not be allowed by the player. (In this case,
the DVD player will display a message on-screen).
SUPER
VIDEO
CDs
On VIDEO CDs
DivX®
This DVD player supports VIDEO CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback variations
depending on types of discs.
• VIDEO CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this DVD player in
the same way as an audio CD.
• VIDEO CD equipped with PBC function (Version 2.0)
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s manual
may not work with some discs.
6
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
About
on your DVD and you do not find
Maximum
playback time
SUPER VIDEO
Audio
+
video
(moving
pictures)
Audio
+
video
(moving
pictures)
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD
single)
Approx. 20 minutes
12 cm
35 min.
8 cm
10 min.
12 cm
It depends on DivX®
quality
8 cm
The following discs are also available.
DVD±R/±RW and DVD-ROM discs of DVD format
CD-R/CD-RW discs of CD-DA, Video CD, MP3 or JPEG
format
Official DivX® Certified product
Plays all versions of DivX® video (including DivX® 6) with
standard playback of DivX® media files
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play DVD-RAM discs or non-standardized discs,
etc., even if they may be labeled as above.
• This DVD player uses the NTSC/PAL colour system, and
cannot play DVDs recorded in any other colour system
(SECAM, etc.).
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture of
DVD and CD discs, Toshiba cannot assure that this DVD player
will successfully play every disc bearing the DVD and CD logos.
If you happen to experience any difficulty playing a DVD and/
or CD disc on this DVD player, please contact Toshiba Customer
Service.
is a trademark of DVD Format/Logo Licensing Corporation.
Table of Contents
Introduction
Advanced playback
2
3
4
5
Accessing a Specific Location Directly ........... 19
Locating a specific title/chapter/time ................... 19
Repeating a Specific Segment ................. 20
Repeating a specific segment ............................ 20
Notes on region numbers ................................... 6
Playing in a Varied Order ......................... 20
Table of Contents ...................................... 7
Identification of Controls ......................... 8
Playing in a Favourite Order .................... 21
Front panel .......................................................... 8
Rear panel .......................................................... 8
DVD display ........................................................ 8
Remote control .................................................... 9
Loading batteries ............................................... 10
Operating with the remote control ...................... 10
Introduction
SAFETY PRECAUTIONS ...........................
IMPORTANT SAFETY INSTRUCTIONS ....
Precautions ...............................................
Notes on Discs ..........................................
Playing titles, chapters or tracks in a varied order .. 20
Setting titles, chapters or tracks in a favourite order .. 21
Zooming a Picture .................................... 22
Zooming a picture ............................................... 22
Selecting the Sound Enhancement (E.A.M.) .... 22
Selecting the sound enhancement ...................... 22
Selecting the Picture Enhancement (E.P.M.) .... 23
Selecting the picture enhancement ..................... 23
Connections
Connecting to a TV ................................. 11
Connecting to a TV (Using the phono type jacks)11
Connecting to a display (Using a HDMITM cable) 12
Connecting to Optional Equipment ....... 13
Connecting to an amplifier equipped with a
Dolby® Digital decoder ......................................... 14
Connecting to an amplifier equipped with
Dolby Surround Pro Logic ................................ 14
Connecting to an amplifier equipped with a
DTS® decoder .................................................. 15
Connecting to an amplifier equipped with an MPEG2
audio decoder .................................................. 15
Connecting to an amplifier equipped with a
digital audio input .............................................. 15
Selecting Subtitles ................................... 23
Selecting a subtitle language .............................. 23
Selecting the Camera Angle .................... 24
Changing the camera angle ................................ 24
Selecting a Language ............................... 24
Selecting a playback audio setting ..................... 24
On-screen Display Operation .................. 25
On-screen display operation .............................. 25
Playing MP3 Files ..................................... 26
Playing MP3 files ................................................ 26
Viewing JPEG Files .................................. 27
Viewing JPEG files ............................................ 27
Viewing a thumbnail view ................................... 27
Playing DivX®/MPEG-4 Files .................... 28
Basic playback
Playing DivX®/MPEG-4 files ............................... 28
Playing a Disc ......................................... 16
Playing USB Device .................................. 29
Basic playback ................................................ 16
Connecting to USB flash drive ........................... 29
Variable Speed Playback ........................ 17
Playing in fast reverse or fast forward directions ..
Playing frame by frame ....................................
Playing in slow-motion ......................................
Resuming playback from the same location .....
17
17
17
17
Locating a Desired Section .................... 18
Locating a title using the top menu ..................... 18
Locating a specific chapter or track .................. 18
Function setup
Customizing the Function Settings ........ 30
Setting procedure ............................................... 30
Setting details ..................................................... 30
Others
Table of Languages ................................... 37
Before Calling Service Personnel ........... 38
Specifications ........................................... 39
7
Introduction
Identification of Controls
See the page in
for details.
Front panel
16
16
10
USB jack
HDMI SELECT
29
12
8
16
HDMI indicator
12
16
16
Rear panel
Power Cord
HDMI OUT
jack 12
11
L
VIDEO
COAXIAL DIGITAL
ANALOG
R
HDMI OUT
HDMI
OUT
11
14
15
DVD display
The indicators vary depending on the kinds of discs you play.
No disc
Bad disc
Bad disc
OPEN
LOAD/CLOSE
DVD VIDEO
VIDEO CD
Audio CD
Picture
• During playback:
Example
Some discs may only
display chapter numbers.
8
• During playback:
Example
• During playback:
Example
Some discs may only
display track numbers.
Some discs may only
display track numbers.
Power off
Chapter/Track
number Indicator
• During thumbnail
viewing
Multifunctional indicator
(indicates operating
status or messages, etc.)
Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Introduction
Remote control
16
16
19
19
22
17
23
23
24
24
16
16
17
18
18
17
17
18
18
25
16
18
20
25
16
19
16
21
20
30
DVD
USB
22
HDMI button 12
DVD button
29
* RETURN button
Return to menu display for VCD (2.0) discs with menu.
USB button 29
* MENU button
Use the MENU button to display the menu included on
many DVDs. To operate a menu, follow the instructions
in “Locating a title using the top menu.” 18
9
Introduction
Identification of Controls (continued)
Loading batteries
1
Open the cover.
2
Insert batteries (R03/AAA size).
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle:
About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the DVD player
to a strong light source such as direct sunlight or
other illumination. If you do so, you may not be able
to operate the DVD player via the remote control.
Make sure to match the + and – on the batteries
to the marks inside the battery compartment.
Caution
Never throw batteries into a fire.
Notes
• Be sure to use R03/AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the environment
in mind. Always dispose of batteries in accordance with
applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace both batteries with
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix battery
types or use new and used batteries in combination.
• Always remove batteries from remote control if they are dead
or if the remote control is not to be used for an extended
period of time. This will prevent battery acid from leaking into
the battery compartment.
• Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
10
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
player.
• When using the remote control, press the buttons at intervals
of about 1 second to ensure the correct mode of operation.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote control.
• Do not open the remote control.
Connections
Connecting to a TV
Connect the DVD player to your TV.
Connecting to a TV (Using the phono type jacks)
HDMI OUT
To VIDEO
OUT
(yellow)
To audio
input
COAXIAL DIGITAL
Connections
L
VIDEO
Normal TV
ANALOG
R
To 2ch AUDIO OUT
(R: red, L:white)
To video
input
(yellow)
• Make the following setting.
Audio/Video cables (supplied)
On-screen display
“Digital Output”
“Video Out”
Select:
“Off”,
“PCM” or
“Bitstream”
Composite
HDMI
Page
34
33
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video
selector, the playback picture may be distorted as DVDs are copy protected.
• Analogue audio out will not have sound if DTS playback is selected.
11
Connections
About HDMI
HDMI has the capability to support standard, enhanced, or
high-definition video plus standard to multi-channel surroundsound audio. HDMI features included uncompressed digital
video, a bandwidth of up to 2.2 gigabytes per second (with HDTV
signals), one connector (instead of several cables and connectors),
and communication between the AV source and AV devices such
as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI licensing
LLC.
HDMI (High Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in
one specification. HDCP is used to protect digital content
transmitted and received by DVI-compliant or HDMI-compliant
displays.
Connecting to a display (Using a HDMITM cable)
L
VIDEO
HDMI OUT
COAXIAL DIGITAL
ANALOG
R
To HDMI
Output
HDMI Cable
Available output signals are below:
• Auto
• 576p/480p (progressive)
• 720p (progressive)
• 1080i (interlaced)
• 1080p (progressive)
Switching the video quality (HDMI mode) using the
HDMI button on the remote control or the HDMI
SELECT button on the front panel.
(not supplied)
HDMI-compatible display
• Make the following setting.
On-screen display
Select:
Page
34
“Digital Output”
“PCM”
Press HDMI button on the remote control or HDMI SELECT
button on the front panel to receive a suitable video quality in
“Video Out”
HDMI
33
STOP mode. The video quality is required to match your TV
having HDMI feature and suitable quality. Please also check
Notes
your TV owner’s manual.
Press this button to change the output signals as below. See • Refer to the owner’s manual of the connected TV as well.
the HDMI indicator and select the appropriate output signal. • When you connect the DVD player to your TV, be sure to turn off
the power and unplug both units from the wall outlet before making
any connections.
HDMI indicator
Video output signal
• If you have a HDMI (with HDCP) equipped monitor or display,
you can connect it to this player using a HDMI cable.
illuminates “ • 1080p”
1080p (progressive)
• The HDMI connector outputs uncompressed digital video, as
Press
well as almost every kind of digital audio that the player is
illuminates “ • 1080i”
1080i (interlaced)
compatible with, including DVD-Video, Video CD/Super VCD,
Press
CD, MP3 and DivX®.
• This unit has been designed to be compliant with HDMI (High
illuminates “ • 720p”
720p (progressive)
Definition
Multimedia Interface) depending on the component
Press
you have connected. Using a HDMI connection may result in
illuminates “ • 576p/480p”
576p/480p (progressive)
unreliable signal transfers.
Press
• Because HDMI is an evolving technology, it is possible that
some devices with an HDMI input may not operate properly
illuminates “ • 576p/480p,
Auto
with this DVD player.
• 720p, • 1080i and • 1080p”
• When using HDMI cable, do not connect to other analogue video
Press
outputs.
• No sound will be output from the HDMI cable if the digital out
576p/480p, 720p, 1080i and 1080p are signals created with
is not set to PCM.
this DVD Player from original 576i/480i signal. The resolution
• HDMI output is only available when the Video Out is set to
of the picture may not be increased even if they are selected.
“HDMI”. Otherwise the HDMI button is invalid.
12
Connections
Content of the output for each output jack is shown in the following table and differ depending on the On-Screen
Display Setting:
HD JPEG Mode: Off
Content of output for
each output jack
On-Screen Display Setting
HD JPEG Mode: On
Content of output for each
output jack during JPEG playback
"Video Out"
HDMI Output
HDMI
Video
HDMI
Video
Setting
Setting *
Output
Output
Output
Output
Composite
-
Composite
-
Composite
480p/576p
Composite
480p/576p
Composite
720p
720p
Composite
720p
-
1080i
1080i
Composite
1080i
-
1080p
1080p
Composite
1080p
-
Connections
HDMI
Invalid
480/576p
* Settings for HDMI output format are performed using the HDMI button on the remote control or HDMI SELECT button
on the front panel.
Notes
• Composite (Video) will not have JPEG pictures output when HD JPEG Mode is on
resolution mode. You may view photos (JPEG ) through HDMI connection.
• If Auto is selected, it follows preference HDMI aspect ratio of TV.
32
, except 480p/576p video
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
• For connection to your TV, see “Connecting to a TV” .
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Warning
• When you are connecting (via the COAXIAL DIGITAL
AUDIO OUT jack) an AV decoder that does not have Dolby
Digital, Digital Theater Systems (DTS) or MPEG2 decoding
function, be sure to set “Digital Output” to “PCM” from the
on-screen displays. Otherwise, high volume sound may
damage your hearing as well as the speakers.
• When playing DTS-encoded discs (DVDs and audio CDs),
excessive noise may be output from the analog audio output
jacks. To avoid possible damage to the audio system, you
should take proper precautions when the analog audio output
jacks of the DVD player are connected to an amplification
system. To enjoy DTS Digital Surround™ playback, an
external 5.1 channel DTS Digital Surround™ decoder
system must be connected to the COAXIAL DIGITAL
AUDIO OUT jack of the DVD player.
Notes
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This
input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack
of the DVD player.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL (COAXIAL)” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
13
Connections
Connecting to Optional Equipment (Continued)
Connecting to an amplifier equipped with a Dolby® Digital decoder
Dolby Digital
Manufactured under license from Dolby
Dolby Digital is the surround sound technology used in theaters showing the latest Laboratories. Dolby and the double-D
movies, and is now available to reproduce this realistic effect in the home. You can symbol are trademarks of Dolby
enjoy motion picture and live concert DVDs with this dynamic realistic sound by Laboratories.
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital
decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, • Use DVDs encoded via the Dolby
you will obtain the full benefit of Pro Logic from the same DVD movies that provide
Digital recording system.
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby • Make the following setting.
Surround mark.
Amplifier equipped with a
Dolby Digital decoder
To COAXIAL
type digital
audio input
L
VIDEO
COAXIAL DIGITAL
To wall
outlet
ANALOG
On-screen display
Select:
Page
“Digital Output”
“PCM” or
“Bitstream”
34
R
To COAXIAL
DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting • Make the following setting.
an amplifier and speaker system (right and left front speakers, a center speaker, On-screen display
Select:
and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier
equipped with a Dolby® Digital decoder.” Refer to that amplifier’s owner’s manual
and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
“Digital Output”
“PCM” or
“Bitstream”
Page
34
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
Dolby Surround Pro Logic
To audio
input
COAXIAL DIGITAL
To wall
outlet
Audio cable (not supplied)
14
L
VIDEO
To ANALOG
AUDIO OUT
ANALOG
R
* Connect one or two rear speakers.
The output sound from the rear speakers will
be monaural even if you connect two rear
speakers.
Connections
Connecting to an amplifier equipped with a DTS® decoder
Amplifier equipped with a
DTS decoder
To COAXIAL
type digital
audio input
L
VIDEO
COAXIAL DIGITAL
To wall
outlet
Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending. DTS
and DTS Digital Out are registered
trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. ©
1996-2008 DTS, Inc. All Rights Reserved.
ANALOG
R
To COAXIAL
DIGITAL
AUDIO OUT
• Use DVDs or audio CDs encoded
via the DTS recording system.
• Make the following setting.
On-screen display
Select:
Page
“Digital Output”
“Bitstream”
34
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVDs with dynamic realistic sound • Use DVDs encoded via the MPEG2
by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2
recording system.
audio processor.
• Make the following setting.
Amplifier equipped with an
MEPG2 audio decoder
COAXIAL DIGITAL
To COAXIAL
type digital
audio input
To wall
outlet
On-screen display
Select:
Page
“Digital Output”
“PCM” or
“Bitstream”
34
L
VIDEO
ANALOG
R
To COAXIAL
DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
• Make the following setting.
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
Select:
amplifier equipped with a digital audio input and speaker system (right and left front On-screen display
speakers).
“Digital Output”
Amplifier equipped with
a digital audio input
To COAXIAL
type digital
audio input
To wall
outlet
Page
34
L
VIDEO
COAXIAL DIGITAL
“PCM”
ANALOG
R
To COAXIAL
DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
15
Connections
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for
home use, on DVDs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
channel DTS encoded sound tracks on DVDs or audio CDs.
Basic playback
Playing a Disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the
video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio
system, turn on the audio system and select the input connected
to the DVD player.
1
Press the ON/STANDBY button on the
front panel or the POWER button on the
remote control.
POWER
2
3
The DVD player turns on.
Press OPEN/CLOSE.
Occasionally, some picture noise not usually visible during
a normal broadcast may appear on the TV screen while
playing a DVD because the high resolution pictures on these
discs include a lot of information. While the amount of noise
depends on the TV you use with this DVD player, you should
generally reduce the sharpness adjustment on your TV when
viewing DVDs.
To start playback in the stop mode
Press PLAY.
To pause playback (still mode)
The disc tray opens.
Press PAUSE/STEP during playback.
To resume normal playback, press the
PLAY button.
• The sound is muted during still mode.
Place the disc on the disc tray.
With the playback side
down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the DVD
player to malfunction.
• Do not place a disc which is unplayable in this DVD
player.
4
To obtain a higher quality picture
Press OPEN/CLOSE to close the disc tray.
Playback starts.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
To turn the power off
If you insert a DVD that contains a top menu, a
to select the
menu may appear. Use / / /
title you want to view, then press ENTER to start
playback.
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD.)
Notes
• If the disc tray is holding a disc you have already played,
playback will begin from the location where you last stopped.
For resuming playback, see 17 .
• Some video CD are recorded with PBC (Playback Control), a menu
with recorded contents may appear on the TV if you have turned
the PBC on. You can make your selection according to its PBC
menu. Press the PBC button on the remote control to turn PBC on
or off anytime during Video CD playback. When switching from
PBC off to PBC on mode, playback will start from the beginning of
the disc. To turn on the menu display again, press the RETURN
button.
16
Press ON/STANDBY on the front panel or POWER
button on the remote control to turn the unit off.
Automatic Power Off function
If the DVD player is stopped, or the screen saver is engaged
for approximately 20 minutes, the DVD player will
automatically turn itself off.
Notes
• Do not move the DVD player during playback. Doing so may damage
the disc.
• Use the OPEN/CLOSE button to open and close the disc tray.
Do not push the disc tray while it is moving. Doing so may cause
the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than
discs on the disc tray. Doing so may cause the DVD player to
malfunction.
• In many instances, a menu screen will appear after playback of
a movie is completed. Prolonged display of an on-screen menu may
damage your television set, permanently etching that image onto its
screen. To avoid this, be sure to press the STOP button on your
remote control once the movie is completed.
Variable Speed Playback
You can play discs at various speeds, and resume playback from the location where you stopped playback.
Playing in fast reverse or fast forward directions
To resume normal playback
Press REV or FWD during playback.
Press PLAY.
REV: Fast reverse playback
FWD: Fast forward playback
Notes
• The DVD player mutes sound and subtitles during reverse
and forward scan of DVDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE/STEP during still playback.
To resume normal playback
Press PLAY.
Each time you press the PAUSE/STEP
button, the picture advances one
frame.
Note: The sound is muted during frame by frame playback.
Playing in slow-motion
Press SLOW during playback.
To resume normal playback
Press PLAY.
Each time you press the SLOW
button, the slow-motion speed
changes in the following sequence:
Notes
• The sound is muted during slow-motion playback.
• 3 speeds are available.
Resuming playback from the same location
1
Press STOP at the location where you
want to interrupt playback.
The DVD player memorizes the
location where playback is stopped.
2
Notes
• There may be a difference in the location where playback
resumes depending on the disc.
• Settings you changed using the on-screen displays while
the DVD player keeps a location in the memory may function
only after the memory is cleared.
• Resuming playback does not work for VCD with PBC on.
Press PLAY.
The DVD player resumes playback
from the location where you stopped
playback.
17
Basic playback
Each time you press the REV or FWD
button, the playback speed changes.
Basic playback
To start playback from the beginning regardless of the location where you stopped playback.
1 Press STOP twice.
• If you want to return to the
beginning of a DVD, open
and close the disc tray once
with the OPEN/CLOSE
button before pressing the
PLAY button.
The DVD player deletes the memory of the location.
2 Press PLAY.
Playback starts from the beginning of the current title.
Playback starts from the beginning of the disc.
Playback starts from the beginning of the current track.
Locating a Desired Section
Normally, DVDs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into
tracks. You can quickly locate any specific title, chapter, or track.
Locating a title using the top menu
1
Press TOP MENU.
The top menu appears on the TV
screen.
3
Press ENTER.
Playback starts from chapter 1 of the
selected title.
e.g.
2
Press
want.
/
/
/
to select the title you
If the titles in the top menu are assigned
a number, you can directly locate a
specific title by pressing its designated
number with the number buttons.
Notes
• The instructions above describe basic procedures which may
vary depending on the contents of the DVD. If different
instructions appear on the TV screen, follow those instructions.
• If you display the top menu during playback and press the TOP
MENU button again without selecting any title, the DVD player
may resume playback from the point where you first pressed
the TOP MENU button (depending on the actual DVD.)
• This method of locating a title is available only on a disc that
contains a top menu.
• Instruction notes of discs may refer to the button that displays
the top menu as TITLE button.
Locating a specific chapter or track
Press SKIP
or
repeatedly to access
the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or tracks.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick
successions, playback starts from the
beginning of the preceding chapter or track.
18
Note
Some titles may not display chapter numbers.
Accessing a Specific Location Directly
Locating a specific title/chapter/time
1
Press T.
Press / to highlight the Title/Chapter/
Track/Time.
SEARCH
T
e.g.
1
00 : 00 : 00
2
Press /
locate.
2
00 : 00 : 00
to select a section you want to
For chapter/track numbers 10 to 19, press +10 once
and the number 10 appears then enter the second digit.
Press ENTER.
For chapter/track numbers 20 to 29, press +10 twice
and the number 20 appears then enter the second digit.
Press ENTER.
For example, if you want to select chapter/track 25, first
press +10 twice then press the number button “5”. Then
press ENTER.
Accessing the time using number buttons:
Just enter 2 digits in order.
The first two numbers you entered represent hours.
The second two numbers you entered represent
minutes.
The third two numbers you entered represent seconds.
Advanced playback
Track
Time
Disc Time
Accessing chapters/tracks using number
buttons:
To set and play favourite bookmark during playback
e.g. When you want to locate a chapter.
1. Press T twice, the display of Bookmark appears, then
press ENTER to mark the desired scene.
SEARCH
1
T
Bookmark
00 : 00 : 00
Or
Press the number buttons to enter title,
chapter (track) number or time.
2. Press ENTER to play the favourite bookmark.
To set other bookmarks.
Follow step 1 and move through the menu by pressing
the or button.
3
Press ENTER.
Press T again to remove this display.
To cancel the Bookmark
Playback starts from the selected
section.
Notes
• Pressing the CLEAR button resets the numbers. To clear
the display, press the T button several times.
• For VCD with PBC on, accessing tracks using number
buttons does not work.
Follow step 1, then press the CLEAR button to cancel the
bookmark. Move through the menu by pressing the or
button to cancel other bookmarks.
Notes
• Some discs may not work with marking operation.
• The marking is cancelled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
19
Advanced playback
Repeating a Specific Segment
You can specify a desired segment and repeat it.
Repeating a specific segment
1
Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.
To resume normal playback
Press A-B RPT until RepAB Off is displayed.
A-B RPT
RepAB Off
A-B RPT
Rep A-
2
Press A-B RPT again at the end of the
segment (point B).
A-B RPT
The DVD player automatically returns to
point A and starts repeat playback of the
selected segment (A-B).
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles.
• You can specify a segment only within the current title or track
(VIDEO CD).
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.
Rep A-B
Playing in a Varied Order
You can play titles, chapters within a title, or tracks in a varied order.
For Audio CD, please see “Playing MP3 files”
26
.
Playing titles, chapters or tracks in a varied order
1
Press PLAY MODE.
PLAY MODE
Press / button to select desired
features and then press ENTER button
to toggle desired mode.
e.g.
2
Press PLAY.
Press the PLAY button, the DVD
player starts playback in the selected
mode.
Play Mode
Mode
Repeat
Normal
: Off
To resume normal playback
Press ENTER until the Off/Normal is displayed.
Normal
Shuffle:
PBC:
Chapter:
Title:
Single:
All:
Off:
20
Shuffle
Chapter
PBC
(VCD only)
Title
Single
Playbacks in random order.
Playbacks in PBC On mode (VCD only).
Repeats the current chapter.
Repeats the current title.
Repeats the current track.
Repeats the entire disc.
Resumes normal playback.
Note
Some discs may not permit these operations.
Playing in a Favourite Order
You can combine your favourite titles, chapters, or tracks and play them in the order you determine. You can program up to
12 selections into the memory. (Memory playback)
Setting titles, chapters or tracks in a favourite order
1
Insert a disc and press MEMORY during
stop.
MEMORY
The following display appears.
e.g. DVD
Memory
Play
Chapter number
Title number
1. While the display appears on the TV screen, press
/ / / to move the highlighted bar to the item
you want to cancel.
2. Press CLEAR.
To resume normal playback from memory
playback
Press MEMORY button.
Press / / / to move the highlighted bar to “Clear
All”, then press ENTER. All the input programs will be
cleared.
Press PLAY button to resume normal playback.
e.g. VCD
Memory
Play
All
Track number
Select the items in the order you want by
pressing the number buttons.
Each time you press the / / / button, the
space is highlighted in turn. Highlight where you want
to enter, then press the corresponding number
buttons.
To select another chapter in the same title, you need
to select the title number.
To select tracks from a VIDEO CD/audio CD in order,
press the number buttons for the track.
Press / / / to move the highlighted
bar to Play, then press the ENTER.
Advanced playback
All
3
1. While the display appears on the TV screen, press
/ / / to move the highlighted bar to the item
you want to change, then press CLEAR.
2. Press number buttons to input the new title/chapter/
track number.
To cancel the programmed selections
Title Chapter
2
To change the programmed selections
DVD: Normal playback will start from current
playback.
VCD: Normal playback will start from the
beginning of the disc.
To program during playback
If you press the MEMORY button during playback, a
programming display appears.
Follow steps 2 and 3.
Notes
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player
repeats the current memory playback.
• If you press the MEMORY button while the display appears
on the TV screen, the display disappears.
• The programmed selections will be cleared when you open
the disc tray or turn off the DVD player.
The DVD player starts memory
playback.
21
Advanced playback
Zooming a Picture
You can magnify areas within a picture.
Zooming a picture
To resume normal playback
Press ZOOM during normal, slow or still
playback.
e.g.
Off is displayed.
ZOOM
2
Each time you press the ZOOM button, the magnification
level changes as follows:
1
Press ZOOM repeatedly until the
Original picture is restored.
The centre part of the image will be
zoomed in.
ZOOM
2
3
Notes
• Some discs may not respond to zoom feature.
• During some scenes, the buttons may not work as described.
• Zooming does not work on subtitles or menus included on
DVDs.
• The magnification level varies depending on the picture size
you select.
Off
Press the ZOOM button to select the magnification level.
Press the / / / buttons to view a different part of the
image. You may move the image from the centre position to
UP, DOWN, LEFT and RIGHT direction.
When you reach the edge of the image, the display will not
shift anymore in that direction.
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
Selecting the sound enhancement
1
To exit the audio enhancement selection
Press E.A.M.
E.A.M.
The sound enhancement will appear:
Leave the DVD player unattended for about a few
seconds after having made a selection.
3D effect
Press the E.A.M. button again, the sound enhancement
change to Off.
3D*:
To obtain expansive virtual surround sound effects
from two speakers.
To use this enhancement on sounds output from the
ANALOG AUDIO OUT jacks, be sure to set “Digital
Output” to “PCM”.
* Effective in playback of a DVD.
22
Notes
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD player is connected to an amplifier equipped
with Dolby Surround Pro Logic, select “3D effect”. Otherwise,
Dolby Surround Pro Logic may function differently than usual.
Selecting the Picture Enhancement (E.P.M.*)
You can easily select a preferred picture enhancement.
*E.P.M.: Enhanced Picture Mode
Selecting the picture enhancement
1
To exit the picture enhancement selection
Press E.P.M.
E.P.M
Contrast
1
1
12
1
6
12
E.P.M
Note
Actual effect to picture may vary depending on the TV. Make
selection according to your preference.
Select the picture enhancement by
pressing / , then press / to make
your selections.
Each time you press the
enhancement changes.
/
button, the picture
Advanced playback
2
Press E.P.M. again.
The picture enhancement menu
appears.
Selecting Subtitles
You can display subtitles on the TV screen and
select a subtitle language from those included on
the DVD.
Selecting a subtitle language
1
2
Press SUBTITLE during playback.
SUBTITLE
The current subtitle setting is
displayed.
Press SUBTITLE while the subtitle setting
is displayed on the TV screen.
Each time you press the SUBTITLE
button, the subtitle languages included
on the DVD change.
e.g.
e.g.
To turn subtitles on or off
1. Press SUBTITLE during playback.
2. Press SUBTITLE repeatedly until the
displayed.
Off
is
Notes
• Some DVDs are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function
to off.
• During some scenes, the subtitles may not appear
immediately after you select your desired language.
• Some DVDs will allow you to make subtitle selections and
turn subtitles on or off only via the disc menu.
To turn off the subtitle setting display,
press the SUBTITLE button repeatedly
Off is displayed.
until
Notes
• When you turn on the DVD player or replace a disc, the player
returns to the initial default setting.
• When you select a subtitle language which is not included on
the disc, the DVD player plays a prior language programmed
on the disc.
• During some scenes, the subtitles may not appear
immediately after you change the subtitle language.
23
Advanced playback
Selecting the Camera Angle
If the scene was recorded from multiple angles,
you can easily change the camera angle of the
scene you are watching.
Changing the camera angle
1
2
Press ANGLE while playing a scene
recorded with multiple angles.
ANGLE
Press ANGLE while the angle number
is displayed on the TV screen.
ANGLE
While playing a scene recorded with
multiple angles, press the ANGLE
button.
e.g.
Press the ANGLE button repeatedly
to change the scene to the next angle
in those recorded.
• About two seconds later, playback
continues from the new angle you
selected.
• If no button is pressed within 10
seconds, playback continues
without changing the current angle.
Number changes to show the number
of the current angle. (The maximum
number of possible angles is 9)
To resume normal playback
Press ANGLE repeatedly until the “
1/3
” is displayed.
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been recorded.
• If only one angle is recorded, “ 1/1 ” is displayed.
Selecting a Language
You can select a preferred language and sound
recording system from those included on the DVD.
Selecting a playback audio setting
1
Press AUDIO during playback.
AUDIO
The current audio setting is displayed.
e.g.
Recorded audio format number changes
sequentially. (The maximum number of
possible audio formats is 8.)
If the abbreviation of the language appears instead
of the language name. Refer to the list of languages
and their abbreviations 37 .
2
Press AUDIO while the audio setting is
displayed on the TV screen.
AUDIO
Each time you press the AUDIO
button, the audio settings included on
the DVD change.
The audio setting display will disappear after a few
seconds.
24
Notes
• When you turn on the DVD player or replace a disc, player
returns to the initial default setting.
If you select a sound track which is not included on the disc,
the DVD player plays a prior sound track programmed on the
disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections
on the disc menu.
Selecting sound channels of VIDEO CDs
AUDIO
Press AUDIO repeatedly during
playback to hear a different audio
channel (Stereo, Left, Right or Mix).
On-screen Display Operation
When you turn on the on-screen display, you can view information on operational status and access features and settings.
On-screen display operation
Press NAVI.
NAVI
The following display appears.
e.g. When playing a DVD.
Select by pressing
/
then press ENTER to
access the feature.
Chapter number
00:30:34/01:00:52 1/1 5/12
Title number
Features
Title number (Track number)
:
To start playback.
To pause playback.
:
Chapter number
:
Elapsed time of the current title or track
:
Remaining time of the current title or track
:
Advanced playback
Elapsed time
Remaining time
To stop playback.
Playback starts from the beginning of the current
chapter or track.
When you press twice in quick successions, playback
starts from the beginning of the preceding chapter or
track.
To locate succeeding chapters or tracks.
Viewing the operational status
1. Press DISPLAY.
The following display appears.
Time counter
“PBC On” will
be displayed
when PBC is
on.
Elapsed time / remaining time of the current track
Elapsed time / remaining time of the current title
Time
Time
00:01:12 / 01:52:46
Title number
Chapter number
3. To turn off the display, press DISPLAY
again.
2. Press DISPLAY again.
Audio setting
D 2 Ch Eng
Subtitle setting
Angle setting
Bit rate
Bit rate (Mbit/s)
Amount of picture, sound and subtitle data
in the DVD transferred per second.
The larger the value is, the more data
processed, but this does not necessarily
insure better picture quality.
25
Advanced playback
Playing MP3 Files
You can play MP3 files that have been recorded on a CD-R or CD-RW on the DVD player.
Playing MP3 files
Play modes for MP3/CD/DivX®
Preparations
®
• Make sure that a disc you want to play is compatible When you play MP3/CD/DivX , you are able to modify the Play
modes through the Toolkit which appears on the right of below
with this DVD player.
picture on the screen. Press / buttons to navigate between
1
2
Place a CD that contains MP3 files on
the disc tray.
3
To stop playback, press STOP.
Press OPEN/CLOSE to load the disc.
A list of folders/files will appear on the screen.
Press / to select the desired folder or
track/file, then press ENTER.
If a track/file is selected, playback will start.
If a folder is selected, the files in the folder
will appear.
Selecting a specific time of the current track
1. Press T.
2. Enter the time to select a specific time you want to play.
3. Press ENTER to begin playback of the selected time.
Notes
• Letters of a file/folder name overflowing the given space are not
displayed.
• You can play in fast reverse or fast forward during MP3 playback.
To pause playback
Press PAUSE/STEP during playback.
To resume normal playback, press
the PLAY button.
Notes
• Some discs may not permit this operation.
• The COAXIAL DIGITAL AUDIO OUT jack outputs MP3 sounds
in the linear PCM format regardless of the current “Digital Output”
selection.
• The SKIP function is also available.
Playable files
MP3 disc compatibility with this player is limited as follows:
• Playable discs:
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
• Sampling Frequency:
44.1 kHz only
• Bit rate:
32 kbps - 320 kbps (CBR*)
• CD physical format:
Mode 1, Mode 2 XA Form 1
• File system:
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet and
numerals only, and must incorporate
“MP3” extension. e.g. “********.MP3”.
• Total number of folders: Less than 256
• Total number of files:
Less than 1000
* CBR = Constant Bit Rate
Note: When the MP3 file is out of the above specifications, the
song may be skipped or muted with counter moving.
26
the windows and / buttons to select files/tracks or play mode
items. Then press ENTER button. Please refer to below steps to
playback files/tracks in the Program view list:
1. Select Edit mode in the Toolkit then press ENTER button to
start edit mode.
2. Select a file/track or more files/tracks you want in the original
view list with the ENTER button.
3. Select Add to program in the Toolkit then press ENTER. “ “
will disappear from the screen. It means that the files/tracks
you have selected already added into the program view list.
4. Select Program view in the
Toolkit then press ENTER to
T01_Divx1.5Mbp.MP3
1/ 3
open the files/tracks in the
T01_Divx1.5Mbp
Repeat : Off
T02_Divx3Mbps
Program view list that you
Mode : Normal
T03_Divx4Mbps
already selected in step 2.
5. Press PLAY to playback all
JPEG Preview
files/tracks in the Program
view list.
The Toolkit has the following play mode items:
• Filter (Audio/Photo/Video): Sets file filters.
Filter is not applicable to Audio CD.
• Repeat (Off/Track/All):
Off: Resumes normal playback.
Track: Repeats the current track/file.
All: Repeats all files on the current folder or all tracks on the disc.
• Mode (Normal/Shuffle/Music Intro):
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
Music Intro: Only playbacks the first 10 seconds of all the
files on the current folder or all tracks on the disc.
• Edit mode: Memory operation works only when Edit mode is
selected. After finish storing the files/tracks you want into
the Program view list, select “Edit mode” again and press
ENTER to release edit mode.
• Program view: To view tracks/files in the Program view list.
It is disabled when the Program view list is empty.
• Add to program: Add files/tracks to the Program view list. It
is disabled if the Edit mode is not selected. (The maximum
number of files/tracks can be added is 30.)
• Browser view: To view files/tracks in the original view list.
• Clear program: Delete the files/tracks in the Program view
list. Select a file/track or more you want to delete in stop
mode. “ “ will appear besides the deleted file/track. Select
Clear program and then press ENTER. It is disabled if the
Edit mode is not selected.
This DVD player requires discs/recordings to meet certain technical
standards in order to achieve optimal playback quality. Prerecorded DVDs are automatically set to these standards. There
are many different types of recordable disc formats (including
CD-R containing MP3 files). Because this area of technology is
still evolving, Toshiba cannot guarantee that all recordable discs
will produce optimal playback quality. The technical criteria set
forth in this owner’s manual are meant only as a guide.
Please be advised that you must obtain permission from the
applicable copyright owners to download copyrighted content,
including music files, in any format, including the MP3 formats,
prior to the downloading thereof. Toshiba has no right to grant and
does not grant permission to download any copyrighted content.
Viewing JPEG Files
You can play JPEG files that have been recorded on a CD-R or CD-RW on the DVD player. You can select a preferred view: a
page of 9 thumbnail images or a single image view. Also, rotating, enlarging and shifting of each image can be possible.
To playback in HD JPEG resolution, see 33 .
Viewing JPEG files
Preparations
• Prepare a disc that contains JPEG files you want to view (see next page for Jpeg files compatibility). In Setup
Menu, it is preferred to select “Original” for “View Mode” 32 .
• Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function
settings via the on-screen displays of the DVD player. If the TV is adjusted to other sizes, e.g. “16:9”, images will
appear to be horizontally expanded. For details, refer to the owner’s manual of your TV.
1
Press OPEN/CLOSE to open the disc tray,
place a disc that contains JPEG files.
To resume normal playback
A list of files in the
disc
appears.
(Selection mode)
e.g.
Press the ZOOM repeatedly until the
1/ 3
ZOOM
Repeat : Off
Mode
: Normal
Off
is displayed.
• Original picture is restored when the
Off
appears.
• Depending on the file size, some files may
not display the entire image.
Advanced playback
Press OPEN/CLOSE to close the disc
tray. A list of folders/files will appear on
the screen.
Press the / / / buttons to view a different part of the
image. You may move the image from the centre position to
UP, DOWN, LEFT and RIGHT direction. When you reach the
edge of the image, the display will not shift anymore in that
direction.
To rotate an image
W: 515 H:770
During playback, press the / button repeatedly to rotate
the picture on the TV screen.
: rotate the picture anti-clockwise by 90o
: rotate the picture clockwise by 90o.
Press
/
button to select your
desired file, and then press ENTER or
PLAY button to star t slide show
playback 34 .
Press STOP to display a folder list.
Note: When you press / button to
select the left file, the selected picture
will appear at the lower right corner.
To set transition effect
During playback, press the ANGLE button to select the
transition effect: Wipe down transition, Wipe up transition,
... , No transition.
Note
The transition effect only works in 480p/576p video
resolution if the HD JPEG Mode is set to “On”.
To quit the JPEG playback, press STOP.
• Pressing the OPEN/CLOSE button to open
the disc tray can also quit the playback.
To pause playback
Press PAUSE/STEP during playback
To resume normal playback, press
Viewing a thumbnail view
1
Press TOP MENU in full-screen review.
e.g.
PLAY.
To change the image
To view the succeeding image, press SKIP
To view the previous image, press SKIP
.
.
Press the / / / to select an
image, press PLAY to view one
image in full-screen and
automatically images will be
displayed one by one again in a few
seconds.
To magnify image
Press ZOOM repeatedly.
ZOOM
Each time you press the ZOOM button, the
magnification level changes as follows:
1
2
3
Off
Turn the page if necessary
Press SKIP
/
to view other thumbnail screen.
27
Advanced playback
JPEG files compatibility
Discs whose compatibility with this DVD player has been confirmed by TOSHIBA are as follows.
CANON QuickCD
Kodak Picture CD
FUJICOLOR CD
NORITSU QSS CD
JPEG disc compatibility with this DVD player is limited as follows:
• Playable discs:
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
• CD physical format:
Mode 1, Mode 2 XA Form 1
• File system:
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet and numerals only, and must incorporate “JPG”
extension.
e.g.“********.JPG” (Do not name the file with “JPE” or “JPEG” extension.)
• Total number of folders:
Less than 256
• Total number of files:
Less than 1000
Depending on the file size, some files may not display the entire image.
Some discs may not permit this operation. Especially, the following conditions of included files will increase the disc’s
inability.
1. Pixels over 2880 x 1920 in height and/or width
2. File size over 2M bytes
3. File format except Exif
Playing DivX®/MPEG-4 Files
You can play DivX® and MPEG-4 files that have been recorded on a CD-R or CD-RW on the DVD player.
Playing DivX®/MPEG-4 files
1
Press OPEN/CLOSE to open the disc
tray, place a disc that contains DivX® or
MPEG-4 files.
Press OPEN/CLOSE to close
the disc tray, after completion of
reading, a list of folders in the
disc will appear.
1/ 3
A list of folders in the disc
appears.
I
Repeat : Off
Mode
: Normal
Playable files
DivX® / MPEG-4 disc compatibility with this player is limited as
follows:
• Playable discs:
•
•
•
•
•
e.g.
•
•
Press / to select your desired
file, and then press ENTER or
PLAY button to start playback.
If your DivX® files include the
subtitle file supported by this unit
(see 31 ), the “External Subtitle
File Selection” menu will appear,
use / to select one extension
and then press ENTER to start
playback.
Press STOP to display a folder
list.
28
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
DivX® 3.11, 4.12, 5.0, 5.1
CBR MP3, VBR MP3, Mono MP3,
DivX® AC3
Enhance video:
GMC, Qpel, Progressive B-frames
Frame rate:
8 to 25 fps
CD physical format:
Mode 1, Mode 2 X A Form 1
File system:
ISO9660 Level 1, 2 or Joliet
File name:
A file name should be in alphabet and
numerals only, and must incorporate
“DIVX” or “AVI” extension.
e.g. “ *******.DIVX ”, “ *******.AVI ”
Total number of folders: Less than 256
Total number of files:
Less than 1000
• DivX® versions:
• Audio format:
Notes
• It is recommended to record the same kind of files in a CD-R or
CD-RW.
• Some DivX® Video-On-Demand files may require registration
code of your DVD player, you may get the code in Misc
settings 36 .
DivX, DivX Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
Playing USB Device
You can connect the USB flash drives (not included) to the USB jack on the front of DVD player.
You can play the files in MP3, DivX® or JPEG format stored on a USB flash drive by connecting it to this player.
Connecting to USB flash drive
1
Plug the USB flash drive to the USB
jack on the front of DVD player.
2
Press the USB button on the remote
control to select USB mode during DVD
stop.
To pause playback
Press PAUSE/STEP during playback
To resume normal playback, press
PLAY.
To stop playback
1 /16
01.MP3
01
A list of folders/files
will appear on the
screen.
02
03
04
05
06
Repeat : Off
Mode
: Normal
To return to DVD mode
DVD
JPEG Preview
e.g.
• Pressing the DVD button on the remote
control to resume DVD playback during
USB device stop.
Advanced playback
• Pressing the OPEN/CLOSE button to open
the disc tray can also quit the playback.
USB
Press / button to select your
desired file, and then press ENTER
or PLAY button to start playback.
Notes
• It is recommended to plug the USB flash drive when the DVD player is off.
• It does not support USB harddisk mass storage device, multi-card reader and other USB computer peripheral.
• It only supports FAT format (e.g. It does not support NTFS).
• It only supports USB flash drive (max. 4G bytes).
• The unit can recognise up to 127 folders and 999 files only.
• It is not possible to play back files whose file size exceeds 1G bytes.
• The connection may not be available depending on the type of your USB flash drive.
• Do not disconnect the USB flash drive when you are playing it, it may corrupt the data. You may remove it in stop
mode or DVD mode.
29
Function setup
Customizing the Function Settings
You can change the default settings to customize performance to your preference.
Setting procedure
1
Setting details
Press SETUP during stop.
Language
The following on-screen display
appears.
Language
: English
: Off
DivX subtitle
: ASCII
: English
Language
: English
DVD Menu
: English
: Off
DivX subtitle
: ASCII
: English
DVD Menu
: English
Language
2
Press
/
to select an option for the
setting you want to change, then press .
Language settings
Video settings
Audio settings
Rating settings
Misc settings
3
Press / to select the setting you want
to change, then press ENTER.
English:
Français:
:
:
To view on-screen displays in English.
To view on-screen displays in French.
To view on-screen displays in Arabic.
To view on-screen displays in Persian.
Ðóññêèé:
To view on-screen displays in Russian.
Indonesia: To view on-screen displays in Indonesian.
1) Press SETUP button.
2) Press button to select Language.
3) Press ENTER button, then use the /
select a preferred language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
button to
Language
DivX subtitle
DVD Menu
4
Subtitle
5
Repeat steps 3 and 4 to change other
settings.
6
Press SETUP.
To select another option, press
step 2.
button to go back to
The on-screen display disappears.
Note
To quit the procedure, press the SETUP button to turn off
the on-screen display.
30
Ðóññêèé
Change the selection by / buttons, by
referring to the corresponding pages, then
press ENTER.
DVD
To select a preferred language (English, French,
Arabic, Persian, Russian or Indonesian) for subtitles.
Auto: To display subtitles in different languages other
than you selected.
Off: To disable subtitles.
1) Press SETUP button.
2) Press
button then use the
/
button to select
Subtitle.
3) Press ENTER button, then use the / button to select
a preferred language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
Audio
Language
Indonesian
DivX subtitle
DVD Menu
1) Press SETUP button.
button, then use the
/
button to select
2) Press
Audio.
3) Press ENTER button, then use the / button to select
a preferred language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
Language
: Off
DivX subtitle
: ko18_r
Function setup
Notes
• Some DVDs may be set to display subtitles in a different
language other than you selected. A prior subtitle language
may be programmed on the disc.
• Some DVDs allow you to change subtitle selections only
via the disc menu. If this is the case, press the MENU
button and choose the appropriate subtitle language from
the selection on the disc menu.
DVD
To select a preferred language (English, French, Arabic,
Persian, Russian or Indonesian) for the sound track.
French
DVD Menu
Arabic
Persian
Russian
DivX® Subtitle
If your DivX® files include a subtitle file, then you may
select a supported DivX® subtitle language by region:
ASCII
Greek
Unicode
Hebrew
Turkish
Arabic
Central European
KO18_R
Cyrillic
1) Press SETUP button.
2) Press button, then use the / button to select
DivX subtitle.
3) Press ENTER button, then use the
/
button to
select a preferred DivX® subtitle language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
Language
: Off
DivX subtitle
ASCII
Note
Some DVDs may not be played in a different language than
you selected. A prior language may be programmed on the
disc.
DVD Menu
DVD
To select a preferred language (English, French, Arabic,
Persian, Russian or Indonesian) for DVD menu.
1) Press SETUP button.
2) Press button, then use the / button to select DVD
Menu.
3) Press ENTER button, then use the / button to select
a preferred language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
Unicode
Turkish
DVD Menu
Central European
Language
Cyrillic
: Off
DivX subtitle
French
Notes
• KOI8_R is an 8-bit character encoding, designed to cover
Russian, which uses the Cyrillic alphabet. It also happens
to cover Bulgarian.
• If your DivX® files do not include the subtitle file, you
cannot use this selection.
• Supported subtitle file formats:
.srt, .sub, .txt, .smi, .ssa.
DVD Menu
Arabic
Persian
Russian
Note
Some DVDs may not include your pre-selected language.
In this case, the DVD player automatically displays disc
menus consistent with the disc’s initial language setting.
31
Function setup
Customizing the Function Settings (continued)
Setting details
Aspect Ratio
Video
: 16 : 9
: Auto Fit
TV System
: PAL
Video Out
: HDMI
HDMI Resolution : Auto
HD JPEG Mode : On
JPEG Interval
Aspect Ratio
: 5 seconds
DVD
1) Press SETUP button.
2) Press /
button to select Video.
button, then use the
/
button to select
3) Press
Aspect Ratio.
4) Press ENTER button, then use the / button to shift
and change the TV type.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
View Mode
DVD
The user may select one of the following options:
Fill:
Fill the screen with decoded image.
Original: Display image as it original size. “Original” is
preferred for Jpeg viewing.
Height Fit: Fit the screen height with image height.
Width Fit: Fit the screen width with image width.
Auto Fit: Automatically fit the decoded image on screen
without distortion.
Pan Scan: Automatically display decoded image on full
screen without distortion.
1) Press SETUP button.
button to select Video.
2) Press /
3) Press
button, then use the
/
button to select
View Mode.
4) Press ENTER button, then use the / button to the
options (Fill, Original, Height Fit, Width Fit, Auto Fit or
Pan Scan).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
Aspect Ratio
: 16 : 9
TV System
Video Out
TV System
: HDMI
Video Out
HDMI Resolution : Auto
HDMI Resolution
HD JPEG Mode : On
JPEG Interval
Width Fit
HD JPEG Mode
: 5 seconds
JPEG Interval
4:3
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill your TV
screen. Either or both sides of the picture
are cut off.
Height Fit
: 5 seconds
Pan Scan
Select when a standard 4:3 TV is
connected. Displays pictures cropped
to fill your TV screen. Either or both
sides of the picture are cut off.
16:9
Select when a 16:9 TV is connected.
Auto Fit
Notes
• The displayable picture size is preset on the DVD.
Therefore, the playback picture of some DVDs may not
conform to the picture size you select.
• When you play DVDs recorded in the 4:3 picture size
only, the playback picture always appears in the 4:3 picture
size regardless of the TV shape setting. But, if Video
Output is set to HDMI 720p/1080i/1080p, then picture
will be 16:9 only.
• If you select “16:9” and you own a 4:3 TV set, the DVD
playback picture will be horizontally distorted during
playback. Images will appear to be horizontally
compressed. Always be sure that your TV shape conforms
to the actual TV in use.
32
Automatically fit the decoded image
on screen without distortion. Black
bars will be present on top/bottom or
left/right of screen.
Note
Depending on the DVDs, you may not be able to view
the mode as selected.
TV System
HDMI Resolution
1) Press SETUP button.
button to select Video.
2) Press /
3) Press button, then use the / button to select
TV System.
4) Press ENTER button, then use the / button to
shift and change the TV system.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
1) Press SETUP button.
2) Press /
button to select Video.
3) Press
button, then use the
/
button to select
HDMI Resolution.
4) Press ENTER button, then use the
/
button to
select the options (Auto, 480p/576p, 720p, 1080i or
1080p).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
: 16 : 9
Aspect Ratio
: Auto Fit
TV System
NTSC
Video Out
PAL
HDMI Resolution
Video Out
Auto
HD JPEG Mode
: 5 seconds
JPEG Interval
NTSC: Select if your TV system is NTSC.
PAL: Select if your TV system is PAL.
Auto: The DVD player automatically identifies PAL or
NTSC video system of a disc. Connect a
multisystem TV (PAL / NTSC compatible) to view
a picture. A playback picture may be distorted
when detected a signal change between PAL
and NTSC on the disc. For the case of
Progressive mode, your multisystem TV must be
able to support 525p and 625p.
Video Out
1) Press SETUP button.
2) Press /
button to select Video.
button, then use the
/
button to select
3) Press
Video Out.
4) Press ENTER button, then use the / button to select
the output mode (Composite or HDMI).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
TV System
: PAL
Video Out
Composite
HDMI Resolution
HDMI
1) Press SETUP button.
2) Press /
button to select Video.
3) Press button, then use the / button to select HD
JPEG Mode.
4) Press ENTER button, then use the / button to select
On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
On: JPEG image is displayed in a suitable picture quality
(480p/576p, 720p, 1080i or 1080p).
Off: The picture quality is fixed to 480p/576p.
: 16 : 9
: Auto Fit
TV System
: PAL
Video Out
: HDMI
HDMI Resolution
HD JPEG Mode
On
JPEG Interval
: 5 seconds
Composite: Select if you connect the DVD to your TV
via composite video (yellow) input.
HDMI:
1080i
1080p
Off
HD JPEG Mode
JPEG Interval
720p
HD JPEG Mode
: 16 : 9
: Auto Fit
480p/576p
Notes
• If the Video Out is not set to “HDMI”, you cannot select
the “HDMI Resolution”.
• Select the HDMI resolution according to the performance
of the connected TV.
Aspect Ratio
Aspect Ratio
: PAL
Auto
High Definition Multimedia Interface. Select if
you connect the DVD to TV via HDMI input.
Notes
• If the Video Out is not set to “HDMI”, you cannot select
the “HD JPEG Mode”.
• All JPEG pictures will not be output through the VIDEO
OUT jack when 720p, 1080i, 1080p or Auto is selected
with HD JPEG Mode on.
• For HDMI output, DISPLAY and ZOOM buttons only work
in 480p/576p resolution mode when HD JPEG Mode is
On.
33
Function setup
HDMI Resolution
HD JPEG Mode
JPEG Interval
: 16 : 9
: Auto Fit
TV System
Function setup
Customizing the Function Settings (continued)
Setting details
JPEG Interval
1) Press SETUP button.
button to select the Video.
2) Press /
3) Press button, then the / button to select the JPEG
Interval.
4) Press ENTER button, then the / button to shift and
change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
PCM: Select when connected to a Multi-channel digital
stereo amplifier. The DVD player outputs sound in the PCM
stereo format when you play a DVD recorded on the Dolby
Digital, MPEG1 or MPEG2 recording system.
Bitstream: Disc audio raw data will be output. Select
“Bitstream” if your amplifier supports “DTS”.
Off: To disable Digital Output.
Off
PCM
Bitstream
Aspect Ratio
: 16 : 9
: Auto Fit
TV System
: PAL
Video Out
: HDMI
HDMI Resolution
HD JPEG Mode
JPEG Interval
Off
5 seconds
10 seconds
15 seconds
Off:
5 seconds:
Plays back one file at a time.
Plays back images in the form of a slide
show at 5 seconds interval.
10 seconds: Plays back images in the form of a slide
show at 10 seconds interval.
15 seconds: Plays back images in the form of a slide
show at 15 seconds interval.
Audio
: PCM
: Off
Notes
• When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analogue audio jacks,
select “PCM” or “Bitstream”.
• If this DVD player is connected to a TV using HDMI,
make sure to select “PCM”.
Night Mode
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
2) Press /
button to select Audio.
button, then use the
/
button to select
3) Press
Night Mode.
4) Press ENTER button, then use the
/
button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
: PCM
Off
Digital Output
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press /
button to select Audio.
3) Press
button, then use the
/
button to select
Digital Output.
4) Press ENTER button, then use the / button to select
the output sound format.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
34
On
Note
Night mode is Dynamic Range Control (DRC) option for
analogue audio output.
Setting details
Rating
Parental Control
: 8. Adult
Set Password
Parental Control
DVD
4) Press “8888” using
number buttons.
(Please note, this is
presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.
The parental lock level is equivalent to the following
ratings:
Level 5: PG-R
Level 1: Kid Safe
Level 6: R
Level 2: G
Level 7: NC-17
Level 3: PG
Level 8: Adult
Level 4: PG-13
5) Press / to select the rating from 1 to 8. Rating one
(1) has the most restrictions while rating eight (8) can
virtually playback all DVD software.
6) Press OPEN/CLOSE button to activate the Parental Level
setting.
If the DVD has been designed to temporarily cancel the
Parental Level, the screen will change depending on which
disc is played. If you select “YES” with the ENTER
button, “Enter Password” screen will appear. Input the 4digit password as you have set then followed by ENTER
button and playback will start. If “NO” is selected, press
the OPEN/CLOSE to remove the disc.
Notes
• If you input a wrong password, press CLEAR button
and re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
DVD
New Password can be set to replace the default password.
1) Press SETUP button.
2) Press / button to select Rating.
3) Press button, then use the / button to select Set
Password.
4) Press ENTER button. “Enter Password” screen will
appear.
5) Press the number buttons to input the current
password (If the password has not been set yet after
you purchase this unit, it is “8888”). Then press
ENTER.
6) Press ENTER button again, “New Password” screen will
appear. Press the number buttons to input the new
password.
7) Press ENTER button, “Confirm Password” screen will
appear. Enter the same password again for confirmation.
8) Press ENTER button. Now your new password has been
set. Be sure to remember this number!
If you forget the password, you can erase your
current password by pressing number button 8
on the remote control four times, then press
ENTER button to confirm the setting.
PASSWORD: 8888
Misc
Screen saver
: On
HDMI CEC
: Off
Use Default Settings
If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button to select Use Default Settings, then
press ENTER button.
4) Press / button to select “Yes”, then press ENTER
button. The original setting will be restored.
Screen saver
: On
Do you want to use default setting?
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
35
Function setup
DVDs equipped with the password function are rated
according to their content. The contents allowed by a parental
lock level and the way a DVD can be controlled may vary
from disc to disc.
For example, if the disc allowed, you could edit out violent
scenes unsuitable for children and replace them with more
suitable scenes, or you could lock out playback of the disc
altogether.
• DVDs may or may not respond to the parental lock
settings. This is not a defect in the DVD player. Make
sure this function works with your DVDs.
1) Press SETUP button.
2) Press /
to select Rating.
3) Press
button to
select Parental
Parental Control
: 8. Adult
Set Password
Control, then press
ENTER button.
Enter Password:
“Enter Password”
screen will appear.
Set Password
Function setup
Customizing the Function Settings (continued)
Setting details
DivX® Registration
HDMI CEC
Some DivX® Video-On-Demand files required registration
code, please get the code of your DVD player as follow:
1) Press SETUP button.
2) Press / button to select Misc.
button, then use the
/
button to select
3) Press
DivX Registration.
4) Press ENTER button, your registration code will be
shown.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
You can control this DVD unit from TV’s remote which is
connected via HDMI cable.
Screen saver
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
HDMI CEC.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
: On
DivX R Video On Demand
Screen saver
Your registration code is :
HDMI CEC
: On
Off
On
Note
This registration code is for DivX® Video-On-Demand only.
Do not apply this code for other applications or websites.
Off: To deactivate HDMI-CEC.
On: To activate HDMI-CEC.
Functions available for the HDMI-CEC
Screen Saver
• One touch play
To turn on or off the screen saver (screen protection
to prevent image burn).
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
Screen saver.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically switch to appropriate input channel.
Button for one touch play: [PLAY] (make sure a
disc is inserted.)
• System information
Get & Set Menu Language:
This unit recognizes the OSD languages set for
the TV and automatically set the same language
as the player menu language (OSD menu
language) for this unit.
Power off:
When you turn the TV off, this unit will automatically
turn off.
Screen saver
Off
HDMI CEC
On
Receiving operational signal from TV’s Remote:
You can operate this unit with TV’s remote control.
Check your TV owner’s manual for details.
Notes
• This function may not work properly depending on
Note
When you leave the unit in DVD stop mode for approximately
2 minutes, the screen saver of the DVD player automatically
appears if you set the Screen saver to On mode. To turn off
the screen saver, press the PLAY button.
36
the TV you are connecting.
• If the Video Out is not set to “HDMI”, HDMI-CEC
will not work.
• Other components must be compatible with HDMI-CEC
in order to use this function.
Others
Table of Languages
Table of languages and their abbreviations
Abbreviation
–––
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician
Abbreviation
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
Language
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Abbreviation
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Language
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Others
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
Language
37
Others
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Symptom
Cause
Correction
Page
No power.
• The power plug is disconnected.
• Connect the power plug securely into the
wall outlet.
11-12
The DVD player turned off by
itself.
• The automatic power off function turned the
unit off.
• Press the PLAY button.
16
No picture
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode on
the TV so the picture from the DVD player
appears on the TV screen.
16
• The video/HDMI cable is not connected
securely.
• Connect the video/HDMI cable securely into
the appropriate jacks.
• Mismatch setting between TV and this unit.
• Select the correct Video Output setting.
• Wrong connection.
• Check the connection.
• The equipment connected with the audio cable is
not set to receive DVD signal output.
• Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
• The audio cable is not connected securely.
• Connect the audio cable securely into the
appropriate jacks.
11-15
• The audio receiver or TV is turned off.
• Turn on the equipment connected with the
audio cable.
16
• The setting of output sound format is
incorrect.
• Select the proper audio setting.
The playback picture has
occasional distortion.
• The disc is dirty.
• Remove the disc and clean it.
5
• It is in fast forward or fast reverse playback.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
-
Brightness is unstable or noises
are present in the playback
pictures.
• The effect of copy protection.
• Connect the DVD player directly to the TV.
Avoid connecting the DVD player to a VCR or
TV/VCR combination.
11
The DVD player does not start
playback.
• No disc is inserted.
• Insert a disc.
16
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type
and colour system.)
6
• The disc is placed upside down.
• Place the disc with the playback side down.
16
• The disc is not placed within the guide.
• Place the disc correctly inside the guide on
the disc tray.
16
• The disc is dirty.
• Clean the disc.
5
• The parental lock function is set.
• Cancel the parental lock function or change
the parental lock level.
35
Playback does not follow the
course of the disc’s program.
• It is in the mode of repeat playback, memory
playback, etc.
• These operations may prevent a proper
progress of the contents.
-
Buttons do not work.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
• Press and hold the ON/STANDBY button on
the front panel for more than about 3
seconds. The DVD player turns off. Press the
button again to turn it on. If the buttons still do
not work, disconnect the power plug and insert
it into the wall outlet again.
-
• The remote control is not pointed at the
remote sensor of the DVD player.
• Point the remote control at the remote sensor of
the DVD player.
10
• The remote control is too far from the DVD player.
• Operate the remote control within about 7 m.
10
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
10
No sound.
The remote control does not work
properly.
38
11-12
33
11-12
16
34
Others
Specifications
DVD player / outputs / supplied accessories
DVD Player
Power supply
100V - 240V AC, 50/60Hz
Power consumption
11 W (standby: less than 1.0W)
Mass
1.26 kg
External dimensions
430 x 41 x 197 mm (W/H/D)
Signal system
PAL/3.58 NTSC
Laser
Semiconductor laser, wavelength 650/780 nm
Frequency range
DVD linear sound :
Signal-to-noise ratio
More than 93 dB
Audio dynamic range
More than 80 dB
Harmonic distortion
Less than 0.05 %
48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Below measurable level (less than ±0.001 % (W.PEAK))
Operating conditions
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
Audio output (COAXIAL DIGITAL)
0.5V (p-p), 75 Ω, pin jack x 1
Audio output (ANALOG)
2.0 V (rms), 680 Ω, pin jacks (L, R) x 1
HDMI output
19 pin
Others
Wow and flutter
Supplied Accessories
Audio/Video cable ................................................. 1
Remote control (SE-R0350) ................................. 1
Batteries (R03/AAA) ............................................. 2
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
39
811-S90091W021
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement