Sylvania DVD Player SDVD8716D User manual

Sylvania DVD Player SDVD8716D User manual
SDVD8716D
Table Of Contents
Safety Precaution
Safety Precaution
1
Package
3
Main Features
3
Main Unit Controls
4
System Connection
5
Basic operation
11
System Setup
14
Specification
17
Troubleshooting
18
Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
1) Please read the instruction manual carefully and follow all the requirements of
safe operation to operate the device.
2) Do not use this unit near water. Do not place over the unit any container with
liquid inside.
3) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
4) Unplug this unit during lightning storms or when unused for long time.
5) About Cleaning: Unplug the system, use only wet cloth to clean. Do not use liquid
detergent or aerosol.
6) Only use accessories specified by the manufacturer.
7) Refer all servicing to qualified service personnel, servicing is required when the
unit has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the unit, exposed to
moisture, does not operate normally. Don't try to repair the machine by yourself
because of the danger of high voltage and electric shock.
8) Do not use irregular shaped discs such as heart or star-shaped discs as they
may cause the unit to malfunction.
1
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
Package
DVD player
1
AC/DC Power Adapter
1
User Manual
1
Car Adapter
1
DC/AV Cable
1
Mounting Straps
2
Main Features
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
High brightness color 7 LCD screen
Compatible with disc of DVD,MP3,CD,JPEG,etc.
Built-in stereo speaker
Support PAL/NTSC system
Reorient or relocate the receiving antenna.
Support Multi-language OSD,speed forward/backward,repeat function
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
2
3
System Connection
Main Unit Controls
ON
Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
unit, then plug the other end into the AC power receptacle. Please refer to the following
illustration.
2
9
10
11
12
AV OUT
DC OUT
1
Powering and installation
OFF
13
AV OUT
DC OUT
CLOSE
OK
3 4
1.
2.
3.
4.
5.
6.
7.
8.
14
5 6 7 8
Open knob
Power ON/OFF switch
SETUP button
Function button
( )/ ( )/ ( )/ ( )
OK button
Play/Pause
STOP button
15
9. DC IN 9-12V
10. DC OUT
11. AV OUT
12. Earphone jack
13. Volume knob
14. Bracket
15. Rating label position
Monitor View
ON
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug
the other end into the car cigarette lighter socket.See illustration below.
AV OUT
DC OUT
OFF
1
BRIGHTNESS
2
3
4
5
6
CLOSE
8
7
5. DC IN 9-12V
6. Brightness knob
7. Bracket
8. Rating label position
1. Power ON/OFF
2. Volume knob
3. Earphone jack
4. AV IN
4
Note:
Car cigarette lighter adaptor is available to use only when the car cigarette lighter with
DC 12V negative grounding.
The mains plug is used as the disconnect device, the disconnect device should remain
readily operable.
5
Connecting to monitor
The unit can also be connected to the external LCD monitor.
Connect the unit to power by AC/DC adapter or cigarette lighter adapter.
Then connect the unit DC OUT jack to DC IN 9-12V Jack of the LCD Monitor by a DC/AV
cable. Also use this DC/AV cable to connect the AV OUT jack of the unit to AV IN jack of
the Monitor.
Please refer to the illustration below.
C1
D1
A
B
OK
AV OUT
DC OUT
C2
D2
E1
F1
A
B
E2
F2
Bring straps C1, C2, D1 &D2 in front of the DVD Player and attach
to the velcro as shown.
C1
D1
Note:
You're advised to supply both units the power by the cigarette lighter adapter only.
OK
C2
6
D2
7
a
E1
F1
Let the belts crossing horizontally to the
top seat and engage the 2 trident clips.
Ensure clips are securely fastened
OK
OK
E2
b
F2
seat.
The mount is designed for the separated headrest, some cars/vans don't
have separated headrest, if the seats look like as below, you must follow the
below installation to fit the mount.
Be sure to complete the installation then use SDVD8716D in the car.
For SDVD8716D installation is recommended that the DVD Player
is on the LEFT headrest, to ensure a neat cable run to the monitor,
as shown below:
OK
8
9
Basic Operation
Connecting with external Speaker
Playing disc of DVD,CD,MP3
The unit can be connected with external speaker.Please see the following illustration.
AV OUT
CD
MP3
1.Connect the unit to the power;
2.Open the unit and adjust the monitor to the best position for viewing.
3.Turn on the unit by sliding the ON/OFF switch to ON.
4.Open the disc door and insert a disc into the door with the label side facing up.
5.Close the disc door. The unit will load the disc and start playing.
6.During playback,press[
] to pause;press it again to resume playback.
DC OUT
AV CABLE
7.When playing disc of DVD,CD,Press[
] ,the unit will search forward. Press it
repeatedly, the unit will play at 2,4,8,16,32 times of speed.press[
],the unit will
search backward. Press it repeatedly,the unit will play at 2,4,8,16,32 times of speed
Not supplied
VIDEO IN
DVD
AUDIO IN
AMPLIFIER
8.Press[ ] once to stop playback; then press[
] to resume playback from the
point where you stopped; press[ ] twice to stop playback completely.
9.When the playing is finished, please turn off the power by sliding ON/OFF switch
to OFF.
TV
Virtual Remote Operation
1.Press "FUNCTION " button when disc is playing, you will see a virtual
remote control as below, and the playback will be paused.
Center speaker
Right front speaker
Left front speaker
2.The virtual key is shown on
the left of the menu, and the
current playback status is
displayed on the right.
SRH
TT
ADO
OSD
3.Use the / / / button to
choose the icon, when the icon
is selected, you can see the
description at the bottom.
SUBWOOFER
M
ZOOM
SUB
Subtitle Off
Repeat Off
Mute Off
Angle Mark Null
SLOW
ANGLE
SEARCH
4.Press OK button, the selected virtual key will be activated, "OK=Selected
function" icon will be shown at top left for 10 seconds, in these 10 seconds
you just need to press OK button to change the style of the function. If the
icon disappear, the OK key will not work. (For Search, Return, Mute, the
icon won't be shown).
5.You can also press "FUNCTION" button to close virtual remote menu
without any operation. The player will resume playing after the menu exit.
Right rear speaker
Left rear speaker
Note:
There is no 5.1 channel in the unit, however,after connecting to APM it is available to
output audio in 5.1 channel.
10
Note:
1.When the disc is in the submenu, press the function key can go back the
title menu.
2.Stop or no disc state, the "FUNCTION" is invalid.
11
Virtual Remote Operation
Playing JPEG file
1.SRH (Search): Press the"SRH" key ,you can see the number bar below, Use
left/right key to move the cursor, press ok to confirm , when playing DVD, you can
change the chapter and the title, press the "T/C " icon change the item you want
to change. When playing CD, you can select the track. Note: To select the title,
you need to enter two numbers.
0 1 2 3 4 5 6 7 8 9 OK T/C
1.Place a JPEG disc into the tray,the unit will start reading and playing.
2.Press [
] and OK button to select a JPEG file from the menu.
3.Press [
] to rotate the picture clockwise.
4.Press [
] to reverse the picture horizontally and press [
] to reverse the
picture vertically.
Function operation:
Press "FUNCTION" key you will see the toolbar as below:
2.M(Menu):to enter or exit menu root
3.ZOOM:When playing DVD discs ,you can zoom in, press the "ZOOM" button
and ok button to change the image size according the following sequence:
x2 x3 x4, when playing JPEG file, you can zoom in and zoom out, press the
"ZOOM" button and ok button to change the image size according the
following sequence: 100% 125% 150% 200% 75% 50%.
4.TT(Title): to display title information
5.ADO( Audio): to select audio language
Play Mp3 file
6.SUB(Subtitle): to select subtitle language when playing DVD disc
7.OSD: Display the disc information during playing DVD/CD. Such as elapsed
time and remaining time.
8.
( Repeat): When playing disc of DVD/CD/MP3, you can change the repeat
style by press repeat button. For different type of disc, it change according
different sequence.
DVD:
Chapter
Title
MP3:
one
folder
Track
All
CD:
Press the / to move the cursor to select functions.
Press "OK" to select the function.
: Return, to return to the main menu.
: To repeat one, repeat all.
: To zoom in/out the image during playback.
Press "FUNCTION" to exit the toolbar.
All
1.Place a Mp3 disc into the disc door.
2.Press[
] to select the file; Press OK button to play the file selected.
00 36 03 43
Dir 001
\Ctyy\
Repeat off
......
Mp3
Mp3
Mp3
Mp3
Mp3
9.Slow: You can press slow key to change the playing speed slowly during
playing DVD. Then press OK repeatedly to change the playback speed
according the following sequence: 1/2 1/4 1/8 1/16.
10.
(Return): to return to the main menu
11.
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
Function operation:
Press "FUNCTION" then you will see the toolbar as below:
0 1 2 3 4 5 6 7 8 9 OK
(MUTE): to turn mute
12.Angle: When playing a DVD disc with multi-angles, press "Angle" button
and OK button to change the display angle.
Note: The function is available only for disc with multi-angle.
12
Press the / to move the cursor to select functions,
Press the number key to select the track.
Press "OK" to select the function.
:MUTE, to turn mute.
: To select repeat one, repeat folder, repeat off.
Press "FUNCTION" to exit the toolbar
13
System Setup
General Setup
Setup Menu
--
Press Setup button, the main menu will be
displayed on the screen
In the General Setup Page,Press
button to highlight this item.
Press OK button to access.
Press
button to select the setting.
Press OK button to confirm your selection.
Press
button to exit.
Main Page
General Setup
Video Setup
Preference Setup
TV Display
Angle Mark
OSD Lang
Screen Saver
Wide
ON
ENG
ON
:Move
Screen Saver
Enter this option to set whether to activate
the screen saver function.
On
Off
:Return
The default is ON.
:Entry
Video Setup Page
General Setup Page
Video Setup
General Setup
TV Display
Angle Mark
OSD Lang
Screen Saver
:Move
Wide
ON
ENG
ON
TV display:
Enter this option,user can set screen display
format(Nomal/PS,Nomal/LB,Wide)
The default isWide
Note
The function depends on the display ratio
with which the DVD disc is recorded.
Please chooseWide(16:9)when using
a 16:9 wide screen TV set.
Normal/PS
Normal/LB
Wide
:Return
TV Type
Panel Quality
NTSC
:Move
PAL
NTSC
:Return
TV Type:
Enter this option to select TV type(PAL,NTSC)
The default is NTSC.
:Entry
:Entry
Video Setup
TV Type
Panel Quality
General Setup
NTSC
Set the Video Quality of PANEL
TV Display
Angle Mark
OSD Lang
Screen Saver
Wide
ON
ENG
ON
Angle Mark:
Enter this option to set the angle during
playback.
Optional setting:ON,OFF
On
Off
:Move
:Entry
:Return
The default is:ON
:Move
:Return
:Entry
Preference Page
Preference Setup
General Setup
TV Display
Angle Mark
OSD Lang
Screen Saver
:Move
Wide
ON
ENG
ON
:Return
OSD Language:
In the option user can set OSD menu
language(English,French,German,Italian).
English
French
German
Italian
The default:English
Audio
Subtitle
Disc Menu
Parental
Default
:Move
:Entry
14
ENG
Off
ENG
:Return
Audio:
Enter this option,user can select your preferred
audio language for DVDs.
The default is English.
Note
The audio language depend on the material
on each disc.
User can also change the audio language
during playback by pressing the Audio button.
English
French
German
Italian
:Entry
15
Specification
Preference Setup
Audio
Subtitle
Disc Menu
Parental
Default
ENG
Off
ENG
:Move
Subtitle
Select your preferred language to show the
subtitles on the screen.
The default is OFF
The subtitle languages depend on the
information available on each disc,You can
also change the subtitle language during
playback by press the SUBTITLE button.
English
French
German
Italian
Off
:Return
:Entry
Preference Setup
Audio
Subtitle
Disc Menu
Parental
Default
ENG
Off
ENG
:Move
Disc Menu
This function allows you to choose the menu
language stored on the disc.
The default is English.
Note:the disc menu languages depend on the
information available on the disc.
English
French
German
Italian
:Return
:Entry
Preference Setup
Audio
Subtitle
Disc Menu
Parental
Default
ENG
Off
ENG
:Move
1
2
3
4
5
6
7
8
:Return
Parental:
Enter this option to set the parental control
level to some unsuitable disc scenes being
watched by the children.
Optional parental control levels: KID SAFE,
G, PG,PG 13,PGR, R, Nc17, ADULT.
KID SAFE
G
PG
PG 13
PGR
R
NC 17
ADULT
Compatible disc: DVD+R/RW, DVD-R/RW, CD-DA, CD-R/RW, MP3,JPEG
Signal system: PAL/NTSC
Panel size: 7 inch
Picture resolution: 480x234(RGB)
Frequency response: 20 Hz to 20 kHz
Video output: 1 Vp-p/75 Ohm, unbalanced
Audio output: 1.4Vrms/10kOhm
Audio S/N: Better than 80 dB
Dynamic range: Better than 85 dB
Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm
Power source: DC 9-12V
Power consumption: 10 W
Operating temperature: 0 ~40
Weight : 0.36/0.7 kgs
Dimensions (W x D x H): 212x166.5x25 / 212x167x40 mm
Note:
1.The quality and speed for reading JPEG photos depend on the resolution and
compression ratio of the photos. Some JPEG photo may not be played due to the
disc quality and the formats.
2.Some DVD+R/RW,DVD-R/RW,CD-R/RW disc may not be played due to the quality
on burning conditions.
The default of this option is ADULT.
Make continuously pressing " FUNCTION "
button on the unit 4 times to be the password
:Entry
Preference Setup
Audio
Subtitle
Disc Menu
Parental
Default
:Move
ENG
Off
ENG
Default:
Select this item and press OK button to reset.
all settings to the original factory settings.
Reset
:Return
:Entry
16
17
Troubleshooting
PROBLEM
SOLUTION
Make sure the machine is connected properly.
Make sure all cables are securely inserted into
the appropriate jacks.
You can't advance through the opening credits
Can't advance
and warning information that appears at the
through a movie beginning of movies because the disc is
programmed to prohibit that action.
No sound or
distorted sound
The icon
appears on
screen
The feature or action cannot be completed at
this time because:
1. The disc's software restricts it.
2. The disc's software doesn't support the
feature (e.g., angles)
3. The feature is not available at the moment.
4. You've requested a title or chapter number
that is out of range.
Picture is
distorted
The disc might be damaged. Try another disc;
It is normal for some distortion to appear during
forward or reverse scan.
No forward or
reverse scan
Some discs have sections that prohibit rapid
scanning or chapter skip;
If you try to skip through the warning information
and credits at the beginning of a movie, you
won't be able to. This part of the movie is often
programmed to prohibit skipping through it.
18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement