- Computers & electronics
- Audio & home theatre
- Cassette players
- Sylvania
- DVD Player SRD4900
- User manual
advertisement
▼
Scroll to page 2
of 28
H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 1 Owner’s Manual Please read before using this equipment. DVD/CD Player with Video Cassette Recorder SRD4900 INSTRUCCIONES EN ESPAÑOL INCLUIDAS. ■ About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5 Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cable Box or Satellite Box Connection . . . . . . . . . . . . . . . . . . . . 6 Connection to an Audio System (DVD Audio Only) . . . . . . . . . . . 6 Connection to a TV (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ■ About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8 ■ VCR/DVD Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ■ First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Turn on the unit for the first time . . . . . . . . . . . . . . . . . . . . . . . . 10 Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Supplied Accessory • Remote control • RF cable (NB111UD or NB161UD) (WPZ0901TM002) with two AA batteries VCR Functions ■ ■ ■ ■ ■ • Audio/Video cables (WPZ0102TM015 or WPZ0102LTE01) Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recording & OTR (One Touch Recording) . . . . . Other Operations . . . . . . . . . . . . . . . . . . . . . . . . On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . Recording Features . . . . . . . . . . . . . . . . . . . . . . Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . DVD Operation During Timer Recording . . . . . . . . Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . ■ MTS System (Multi-Channel Television Sound) . ■ Special Features . . . . . . . . . . . . . . . . . . . . . . . . . Time Search / Index Search / Auto Repeat . . . . . . • Owner’s Manual (0VMN04014) Owner's Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 11 11 12 12 12 13 13 13 14 14 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Track Search / Title/Chapter Search / Time Search . . . . . . . . . Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeat / Random / Programmed Playback . . . . . . . . . . . . . . Repeat Playback / Repeat A-B Playback / Random Playback / Programmed Playback. . . . . . . . . . . . . . . . Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Subtitle Language / Audio Language / Camera Angle / Black Level Setting / Stereo Sound mode / Virtual Surround . . . . . . . DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TV Display Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To return the All Selections of SET UP (except for PARENTAL) to the Default Setting 15 16 16 17 17 17 18 DVD Functions ■ ■ ■ ■ ■ ■ ■ ■ If you need additional operating assistance after reading this owner’s manual, please call 18 19 19 20 20 21 21 22 22 Information TOLL FREE : 1-800-968-3429 ■ ■ ■ ■ Troubleshooting Guide . Specifications . . . . . . . . Language List . . . . . . . . Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 24 24 24 Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Setup Setup DVD Functions VCR Functions .............2 .............3 .............4 .............4 .............4 .............4 .............4 .............4 Information Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . ■ Important Safeguards . . . . . . . . . . . . . . . . . . . Installation Location . . . . . . . . . . . . . . . . . . . . . Avoid the Hazards of Electrical Shock and Fire. Moisture Condensation Warning . . . . . . . . . . . . About Copyright . . . . . . . . . . . . . . . . . . . . . . . . Symbol Used in This Manual . . . . . . . . . . . . . . Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . Precautions Table of Contents Precautions Cable Signal Cable Signal Antenna or Disconnect (Back of TV) Antenna (Back of DVD/VCR) or 2 Connect (Back of TV) ANT-IN ANT-OUT 3 Connect RF Cable (supplied) 5 Please refer to "Connections" on page 5. Español Basic TV Connection 4 AC outlets Plug in From DVD/VCR From TV H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 2 Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: Precautions TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Laser Safety This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: CAUTION: LOCATION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. INSIDE, NEAR THE DECK MECHANISM. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. A NOTE ABOUT RECYCLING Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. Make your contribution to the environment!!! • Used up batteries do not belong in the dust bin. • You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details. For Customer Use: Read carefully the information located at the back of this unit and enter below the Serial No.Retain this information for future reference. Model No. _____________________ Serial No. _____________________ –2– EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 3 Important Safeguards proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD WIRE Precautions 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments - Do not use attachments not recommended by the video product manufacturer as they may cause hazards. 7. Water and Moisture- Do not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories - Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power Sources - This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 11. Grounding or Polarization - This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with regard to GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT NEC – NATIONAL ELECTRICAL CODE S2898A GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) 14. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges. 15. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry - Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product. 18. Servicing - Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service - Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. e. If the video product has been dropped or damaged in any way. f. When the video product exhibits a distinct change in performance this indicates a need for service. 20. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21. Safety Check - Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. 22. Heat - This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. –3– EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 4 Installation Location Maintenance Precautions For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields. Avoid the Hazards of Electrical Shock and Fire • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug. • If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. • Do not put your fingers or objects into the DVD/VCR cassette holder. Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry. About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Symbol Used in This Manual The following symbols appear in some headings and notes in this manual. VCR DVD-V CD MP3 : Description refers to playback of video cassette tapes. : Description refers to playback discs. : Description refers to playback CDs. : Description refers to playback or recording of DVD-Video SERVICING ¡Please refer to relevant topics on the Troubleshooting Guide on page 23 before return the product. ¡When this unit become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our help line mentioned on the front page to locate an Authorized Service Center. CLEANING THE CABINET ¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. CLEANING DISCS ¡When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. ¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records. CLEANING THE DISC LENS ¡If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. DISC HANDLING ¡Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. ¡Always store the disc in its protective case when it is not used. AUTO HEAD CLEANING ¡Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture. ¡Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your DVD/VCR may need to be cleaned. 1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2. If a Video Head Cleaner does not solve the problem, please call our help line mentioned on the front page to locate an Authorized Service Center. NOTES: ¡Remember to read the instructions along with the video head cleaner before use. ¡Clean video heads only when problems occur. of Audio Note to CATV system installer of MP3 files. This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building, as close to the point of cable entry as practical. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. –4– EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 5 Setup About the Video Cassettes and Discs Playable Video Cassettes Use only cassettes marked with this unit. Playable Discs Playable discs Mark (logo) DVD-Video Region code Recorded signals Disc size Digital video (MPEG2) 12 cm or 8cm Disc types or * 1,2,4,6 DVD-R DVD-RW - Example Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 * 1,2,3,4,5,6 DVD+R DVD+RW - * 1,2,3,4,5,6 * 4,6 - CD-R CD-RW Digital audio or MP3 12 cm or 8cm Track 1 MP3 Example Track 1 * 4,5,6 Track 2 Track 3 Track 4 Track 5 Track 4 Track 5 Group 1 Track 2 Track 3 Setup Digital audio Example Audio CD Track 6 Group 2 Track 6 If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back. *2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers. *3: Only the discs which have been recorded in the video format and finalized can be played back. Discs unfinalized or recorded in the video recording format cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may be not be smooth, etc.). *4: Scratched or stained discs may not be played back. *5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs. *6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised. Unplayable Discs ¡On the following discs, only the sound can be heard (picture cannot be viewed). CDV CD-G ¡NEVER play back the following discs. Otherwise, malfunction may result! DVD-RAM CD-I Photo CD Video CD DVD with region codes other than 1 or ALL DTS-CD DVD-ROM for personal computers CD-ROM for personal computers ¡On the following disc, the sound MAY NOT be heard. Super Audio CD Note: Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio CD layer cannot be delivered. ¡Any other discs without compatibility indications. Connections Please refer to “Basic TV Connection” on the front page before you use this unit. RF Output Channel If there is a TV station broadcasting on channel 3, 1) Set your TV to channel 4. 2) Insert a pre-recorded tape into this unit. 3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit. • If noise appears on the TV screen, press the VCR/TV button on the remote control. 4) Press the PLAY button once. 5) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds. • The RF output channel will change to channel 4 from channel 3 and you will see a playback picture. • When a picture does not appear on the TV screen, repeat step [4]. 6) Press the STOP button to stop playback. –5– Hint • The RF output channel may not change when you adjust tracking during playback. In this case, stop playback, and start playback again. After that, press the PLAY button on the DVD/VCR for 3 seconds again. EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 6 Cable Box or Satellite Box Connection Connection A (Cable box or Satellite box) IN OUT (Back of DVD/VCR) Connection B (Back of DVD/VCR) ANT-IN ANT-IN ANT-OUT Cable Signal Cable Signal E RF Cable (supplied) (Back of TV) ANT-OUT (Cable box or Satellite box) IN RF Cable (supplied) Setup With this connection, channels cannot be changed on the DVD/VCR. You can view or record ONLY the channels you have selected on the cable box or the satellite box. • While you are recording, only the channel selected on the box can be viewed. To select channels of the cable box or satellite box 1) Turn on the DVD/VCR by pressing the POWER button, and then, press the VCR/TV button.The “POWER” and “VCR” lights on the front panel will appear. Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of the cable b ox or satellite box). • If you use the channel 4, you need to change the DVD/VCR’s RF output to channel 4. Refer to “RF Output Channel”. 2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1). 3) At the cable box or satellite box, select the channel you want to view or record. E OUT RF Cable (Back of TV) Select this connection when you want to change channels on the DVD/VCR. With this connection, you may watch one channel while recording another. • You may not view or record a scrambled channel. To select channels of the cable box or satellite box 1) At the cable box or satellite box, select channel 3 or 4 (the same channel as the DVD/VCR’s RF output channel.) • Refer to “RF Output Channel”. 2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box. 3) Turn on the DVD/VCR by pressing the POWER button, and then, press the VCR/TV button. The “POWER” and “VCR” lights on the front panel will appear. Then, select the channel you want to view or record. To play back a tape Follow the steps 1) to 2) above. Then, play back a tape. • Refer to “Playback” on page 11. To view one channel while recording another 1) While you are recording on the DVD/VCR, press the VCR/TV button so that the “VCR” light disappears on the DVD/VCR. 2) At the cable box or satellite box, select the channel you want to view. Connection to an Audio System (DVD Audio Only) Method 1 Method 2 Stereo system Audio receiver with Dolby Digital decoder Analog audio input jacks AUDIO L R COAXIAL Audio cable (supplied) Digital audio input jack Audio Coaxial Digital cable or DVD/VCR (Analog) AUDIO OUT DVD/VCR VCR AUDIO OUT AUDIO IN L L R R DIGITAL AUDIO OUT DVD AUDIO OUT DIGITAL AUDIO OUT (DVD only) S-VIDEO OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y L CB COAXIAL Y DVD AUDIO OUT R CR L VIDEO OUT VIDEO IN CB COAXIAL R CR Note • Set “DOLBY DIGITAL” to “OFF” for the AUDIO setting in the setup mode for method 1 only. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to pages 20-21.) • The DVD/VCR Audio Output jacks will output either VCR or DVD signals, depending on which OUTPUT mode you have selected. The DVD Audio Output jacks will only output DVD signals, regardless of which OUTPUT mode you have selected. See page 9. Note • If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set “DOLBY DIGITAL” to “ON” for the AUDIO setting in the setup mode. (Refer to pages 20-21.) • The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck. • Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “OFF” for the AUDIO setting in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to pages 20-21.) • Set “DOLBY DIGITAL” to “OFF” for the AUDIO setting in the setup mode for connecting to an MD deck or DAT deck. (Refer to pages 20-21.) • By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theaters. –6– EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 7 Connection to a TV (Video) Basic Audio TV Method 1 Method 2 Method 3 Good picture Better picture Best picture COMPONENT VIDEO IN AUDIO IN L R Y S-VIDEO IN VIDEO IN Y PB CB or PR Video cable (supplied) Audio cable (supplied) Component Video cables (available at retail stores) DVD/VCR AUDIO OUT DVD AUDIO OUT DVD/VCR S-VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT L R R VCR AUDIO OUT DIGITAL AUDIO OUT AUDIO IN L R VIDEO OUT VIDEO IN COMPONENT VIDEO OUT Y R ANT-OUT R CB CR VIDEO OUT S-VIDEO OUT L ANT-IN L R DVD AUDIO OUT L VCR L CB R DVD/VCR L AUDIO IN Y L COAXIAL VCR AUDIO IN VIDEO IN VIDEO OUT COAXIAL VIDEO IN DIGITAL AUDIO OUT R DVD AUDIO OUT S-VIDEO OUT Setup DVD/VCR DIGITAL AUDIO OUT CR S-Video cable (available at retail stores) COMPONENT VIDEO OUT CR Y L VIDEO OUT S-VIDEO OUT (DVD only) or DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COAXIAL CR CO V COMPONENT VIDEO OUT (DVD only) L COAXIAL CB R R (Analog) AUDIO OUT Note • Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. • The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT, and COMPONENT VIDEO OUT jacks are only useful in DVD mode. • The DVD/VCR Audio Output jacks will output either VCR or DVD signals, depending on which OUTPUT mode you have selected. The DVD Audio Output jacks will only output DVD signals, regardless of which OUTPUT mode you have selected. See page 9. Front & Rear Terminals DVD ANALOG AUDIO OUT jacks Connect the supplied audio cables here to the Audio In jacks of a television or other audio equipment. (DVD only) COAXIAL jack Connect an optional coaxial digital audio cable here to the coaxial digital audio in jack of an audio receiver. (DVD only) S-VIDEO OUT jack Connect an optional S-Video cable here to the S-video in jack of a television. (DVD only) DVD/VCR AUDIO OUT jacks Connect the supplied audio cables here to the audio In jacks of a television or other audio equipment. DVD DIGITAL AUDIO S-VIDEO OUT AUDIO OUT OUT COMPONENT VIDEO OUT DVD/VCR VCR AUDIO OUT AUDIO IN DIGITAL AUDIO OUT AUDIO OUT R COAXIAL VIDEO OUT R COMPONENT VIDEO OUT jacks Connect optional component video cables here to the component video in jacks of a television. (DVD only) POWER REW L L DVD CB COAXIAL ANT-IN F.FWD STOP/EJ VIDEO Y L AUDIO IN jacks Connect audio cables coming from the audio out jacks of a ANT IN jack camcorder, another VCR, here. Connect your antenna or cable box here. L S-VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT Y L RCP / B B R / L -- AUDIO -- R DVD/VCR VCR AUDIO IN ANT-IN L R VIDEO OUT R VIDEO IN ANT-OUT VIDEO IN CPRR/ ANT-OUT CR [Back of DVD/VCR] DVD/VCR VIDEO OUT jack Connect the supplied yellow video cable here to the TV’s video in jack. –7– VIDEO IN jack Connect a cable coming from the video out jack of a camcorder, another VCR, here. [Front of DVD/VCR] ANT OUT jack Connect the supplied RF cable to the antenna input on your TV. EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 8 About the Remote Control and Front Panel VCR mode DVD mode Remote Control POWER 1 SPEED AUDIO 2 3 Disc/Tape Button (Alphabetical order) 1 2 3 4 5 6 7 8 9 0 +10 OPEN/CLOSE /EJECT SKIP/CH. 4 5 6 7 8 9 0 +10 DISPLAY VCR DVD VCR/TV ENTER SLOW CD MP3 A-B • To select channel. • The +10 button has no effect in VCR mode. • To search forward/backward through a disc. • To search forward/backward • To begin slow forward/reverse through a disc. playback during the pause mode. • To forward/backward a tape. • To move the cursor and determine its position. • To move the cursor and determine its position. • To repeat between your chosen point A and B. • To repeat between your chosen point A and B. (CD) ANGLE • To select camera angles on a disc. AUDIO • To select audio languages on • To select STEREO, a disc. L-CH or R-CH. (CD) STOP REC/OTR ENTER RETURN SETUP TOP MENU MODE V.SURR. SEARCH MODE CLEAR/ C. RESET SUBTITLE T-SET ANGLE REPEAT A-B CLEAR/ C. RESET Setup DISPLAY MENU • To clear the markers. • To clear the numbers entered incorrectly. • To clear the markers. (CD) • To remove status No. in program input. • To clear the numbers entered incorrectly. • To exit the VCR Menu. • To reset the tape counter. • To display the current disc mode. • To display the current disc mode. • To display the current time, tape counter, and channel. • To call up the Menu on a disc. • To call up the MP3 menu. (MP3) • To set black level on/off. • To arrange the playing order or play randomly. • To open or close the disc tray. • To open or close the disc tray. • To eject the video cassette from the VCR. • To pause disc playback. • To advance playback one frame at a time. • To pause disc playback. • To pause tape playback or recording. • To advance playback one frame at a time. • To begin disc playback. • To begin disc playback. • To begin tape playback. • To turn the unit on or off. • To turn the unit on or off. • To turn the unit on or off. MODE OPEN/CLOSE /EJECT PAUSE Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. • To select an item on the VCR Menu. • To advance to the next VCR Menu. • To go back one step during clock and timer setting. • To select the DVD output • To select the DVD output mode. mode. • To activate the remote control • To activate the remote control in DVD mode. in DVD mode. DVD Installing the Batteries for the Remote Control VCR • To select chapter or title directly. • To select track directly. PAUSE PLAY MENU DVD-V PLAY • To call up the VCR Menu. POWER 1 REC/OTR • To start a recording. REPEAT 2 RETURN SEARCH MODE 3 SETUP SKIP/CH. • To play a track or disc repeatedly. (CD) • To play a chapter or title • To play a track, group or disc repeatedly. repeatedly. (MP3) • To return to the previous • To return to the previous operation on the DVD setup operation on the DVD setup menu. menu. • To search track. • To search chapter, title or time. • To search time. (CD) • To call up the index or time • To rapidly return to • To rapidly return to search menu. a location of disc. a location of disc. • Search the markers. • Search the markers. (CD) • To call up the DVD setup menu. • To call up the DVD setup menu. • To skip chapters. • To skip tracks. SKIP/CH. SLOW Keep in mind the following when using the remote control: • Make sure that there is no obstacle between the remote and the remote sensor on the unit. • Use within the operating range and angle, as shown. • To view the tape in slow motion. SPEED • To select the recording speed. STOP SUBTITLE T-SET TOP MENU ut bo m) a in (7 ith t W 3 fee 2 • To change channels. • To adjust the tracking manually during playback. • To stop playback. • To stop playback. • To put the VCR into standby mode for a timer recording. • To select subtitles on a disc. • To call up the Top Menu on a disc. • To return to the top file of the highest hierarchy in the program and MP3 menu. (MP3) • To select the VCR output mode. • To activate the remote control in VCR mode. VCR VCR/TV • To stop playback or recording. • To select DVD position or TV position. • To select CD/MP3 position or TV position. • To select VCR position or TV position. V.SURR. Remote control • To set virtual surround on/off. • To set virtual surround on/off. –8– EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 9 Front Panel Display Lights up when the disc is inserted. Illuminates when the unit is on. Lights up when the inserted disc is being played back. Flashes when an unacceptable disc is installed. Lights up during a recording. Flashes when a recording is paused. OPEN/CLOSE OUTPUT VCR POWER REW F.FWD STOP/EJECT PLAY REC/OTR L -- AUDIO -- R DVD SKIP H CHANNEL VIDEO DISC IN STOP PLAY G SKIP / REV FWD Setup Lights up when the timer recording or an OTR recording has been set. VCR/DVD Selection Because this product is a combination of a VCR and a DVD player, you must select which component you wish to operate with the OUTPUT button. VCR MODE OPEN/CLOSE Press the VCR button on the remote control. (Verify that the VCR OUTPUT light is lit.) POWER SPEED AUDIO 1 2 3 4 5 6 7 8 9 0 +10 VCR DVD OPEN/CLOSE /EJECT OUTPUT VCR POWER REW F.FWD STOP/EJECT PLAY REC/OTR VIDEO CHANNEL DVD SKIP H DISC IN STOP PLAY G SKIP / L -- AUDIO -- R REV FWD SKIP/CH. VCR/TV DVD MODE VCR button Press the DVD button on the remote control. (Verify that the DVD OUTPUT light is lit.) SLOW DISPLAY PAUSE DVD button OUTPUT PLAY STOP Note • Pressing only the OUTPUT button on the front panel DOES NOT switch the mode of the remote control. You MUST select the correct mode on the remote control. • The DVD/VCR Audio Out and Video out jacks will output either VCR or DVD signals, depending on which mode you have selected. The DVD Component Video, S-Video Out, Audio Out, and Digital Audio Out jacks will only output DVD player signals, no matter which mode you have selected. –9– VCR DVD REC/OTR DVD OUTPUT light OUTPUT button ENTER MENU RETURN SETUP TOP MENU MODE V. SURR. SEARCH MODE CLEAR/ C. RESET SUBTITLE T-SET ANGLE REPEAT A-B VCR OUTPUT light EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 10 First Time Use Turn on the unit for the first time VCR VCR 1 Turn on the TV and select channel 3. • If channel 3 is already occupied for broadcasting, see“RF Output Channel” section. To Preset the Channel Again To Change the On-Screen Language 2 POWER Remote Control TV Screen LANGUAGE SELECT B ENGLISH or [ON] FRANCAIS Setup ESPAÑOL 1) Press the MENU button until the main menu appears. 2) Select "LANGUAGE SELECT" by pressing the K or L button. Then, press the B button. 3) Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by pressing the K or L button. Then, press the CLEAR/C.RESET button. Hint 3 CH 01 AUTO SET UP 4 CLOCK SET 1) Press the MENU button until the main menu appears. 2) Select "CHANNEL SET UP" by pressing the K or L button. Then, press the B button. 3) Select "AUTO SET UP" by pressing the K or L button. Then, press the B button. After scanning, the tuner stops on the lowest memorized channel. • If you accidentally select Spanish or French and need English: Press the MENU button and choose SELEC. IDIOMA, or SELECTION LANGUE. Press the B button, and select ENGLISH. Finally, press the CLEAR/C.RESET button. or MONTH DAY 03 / 15 YEAR 2004 HOUR MINUTE –– : –– AM/PM –– Select the current year 5 CLOCK SET or MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 HOUR MINUTE 05 : –– AM/PM –– Select the current hour 6 CLOCK SET or MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 HOUR MINUTE 05 : 40 AM/PM –– Select the current minute Clock Set Up VCR VCR Did you connect the cable from the cable box or the satellite box to the DVD/VCR’s ANT IN jack? 1 TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP B CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [ON] SAP YES Yes Press the MENU button to exit • Refer to “Hint for Cable Box or Satellite Box” section on page 6. -MENU- MENU or NO No 7 CLOCK SET or MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 HOUR MINUTE 05 : 40 • Select CLOCK SET when you press the MENU button. Go to step [2]. AM/PM P M AM B PM Select “AM” or “PM” Please wait for a few minutes. After TV station scanning... • The tuner stops on the lowest memorized channel. • You can select only the channels memorized in this unit by using the CHANNEL buttons. • If "AUTO SET UP" appears on the TV screen again, check the cable connections. Then, press the B button once again. 8 2 CLOCK SET or MONTH DAY 03 / –– YEAR –––– HOUR MINUTE –– : –– AM/PM –– Hint Hint Select the current month • Repeat these steps only if either there was a power failure or this unit has been unplugged for more than 30 seconds. To Select a Channel You can select a channel by directly entering channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, press 1,1,7) • You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). To exit the CLOCK SET screen. 3 • To go back one step, press the s button (during the steps [2] to [7].) • Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds. CLOCK SET or MONTH DAY 03 / 15 YEAR –––– HOUR MINUTE –– : –– AM/PM –– Select the current day – 10 – EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 11 VCR Functions Playback Before: Turn on the TV and select channel 3. 1 4 POWER • If channel 3 is already occupied for broadcasting, see “RF Output Channel” section. SPEED AUDIO 2 3 1 Hint OPEN/CLOSE /EJECT OPEN/CLOSE SKIP/CH. VCR 4 5 6 7 8 9 0 +10 VCR DVD VCR/TV VCR POWER REW SLOW 1 2 Remote Control TV Screen PLAYB PLAY DISPLAY 2 PLAY REC/OTR CHANNEL / L -- AUDIO -- R PAUSE PLAY 3 2 4 3 STOP REC/OTR 3 F.FWD STOP/EJECT VIDEO • When a tape without record tab is inserted, the DVD/VCR will start playback automatically. • Tracking will be automatically adjusted. To adjust the tracking manually, press the CHANNEL buttons. 4 OPEN/CLOSE /EJECT STOP STOP EJECT A Recording & OTR (One Touch Recording) 3 6 Hint 1 • If channel 3 is already occupied for broadcasting, see “RF Output Channel” section. POWER VCR VCR Remote Control 1 SPEED 1 2 TV Screen 2 3 4 5 2 6 7 5 6 7 8 9 with tab Tape Speed T60 1hour 3hour T120 2hours 6hour T160 2-2/3hours 8hour REC/OTR REC You can select a set recording time by pressing the REC/OTR button repeatedly. REC (Normal recording) OTR(0:30) STOP VCR DVD POWER REW L -- AUDIO -- R REC/OTR MENU REC/OTR CHANNEL 5 4 6 STOP SETUP PLAY / PAUSE PLAY 5 4 F.FWD STOP/EJECT VIDEO ENTER TOP MENU RETURN STOP OTR(1:00)..... • To view one channel while recording another 1) While you are recording on the DVD/VCR, press the VCR/TV button. 2) At the cable box or satellite box, select the channel you want to view. • If you have connected the DVD/VCR to a cable box or satellite box, refer to “Hint for Cable Box or Satellite Box” section on page 6. Accidental erasure prevention To prevent accidental recording on a prerecorded cassette, remove its record tab. To record later, cover the hole with cellophane tape. Record tab INPORTANT: You CANNOT copy a DVD to a videotape. OTR(7:30) OTR(8:00) 5 +10 Recording/Playback Time Type of tape SP mode SLP mode 4 DISPLAY CH12 • Select the desired tape speed SP 9 0 SLOW • Select the desired channel 0 SPEED 8 3 4 OPEN/CLO VCR/TV SKIP/CH. 3 OPEN/CLOSE /EJECT AUDIO SKIP/CH. 2 1 2 6 To stop recording temporarily (Pause mode) OPEN/CLOSE /EJECT EJECT A Press the PAUSE/STILL button. • During the rec-pause mode, five C marks appear on the TV screen. Each C mark represents one minute. • Press it again to resume recording. Other Operations To cue or review picture during playback (Picture Search) Counter Reset Hint Press the CLEAR/C.RESET button. Press the F.FWD or REW button. • Press it again and the DVD/VCR will search in super high speed. (in the LP/SLP modes only) To play back in slow motion • Still/Slow/Pause mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head. • To return to playback from the Picture Search/Still/ Slow mode, press the PLAY button. To freeze the picture on TV screen during playback (Still mode) Press the PAUSE/STILL button. Each time you press the button, the picture will be forwarded by one frame. • If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing the CHANNEL buttons. • If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped. Press the SLOW button during playback or the still mode. • If the noise bars appear on the TV screen, you can reduce it by pressing the CHANNEL buttons. Auto Rewind When a tape reaches its end during playback, fast-forward, or recording (except timer recording and One Touch Recording), the tape will automatically rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape. – 11 – EN VCR Functions Before: Turn on the TV and selct channel 3. H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 12 On-Screen Display VCR VCR 1 2 3 4 5 6 7 8 9 0 +10 DISPLAY VCR DVD SKIP/CH. 1 To call up the main menu 3 To select VCR/TV -MENU- MENU SLOW CHANNEL SET UP B TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT PAUSE AUTO SET UP B MANUAL SET UP PLAY STOP 2 To choose an item 4 To exit the menu -MENUor CLEAR/ C. RESET REC/OTR 1 4 MENU OR TIMER PROGRAMMING AUTO REPEAT [OFF] B CHANNEL SET UP CLOCK SET LANGUAGE SELECT MENU ENTER SETUP TOP MENU MODE V.SURR. SEARCH MODE CLEAR/ C. RESET SUBTITLE T-SET ANGLE REPEAT A-B RETURN 2 3 4 Recording Features Timer Recording •Insert a tape with its record tab into the DVD/VCR. VCR 5 VCR 1 -MENUMENU Select the desired start time (hour) 9 ONE TIME PROGRAM or ONE TIME PROGRAM B TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [ON] SAP or PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME 0 7 : 3 0 – – END TIME – – : – – – – CHANNEL –– REC SPEED – – VCR Functions Select the desired recording speed • To set another program after step [9], press the B button. Then, continue with step [2]. Select the minute CLEAR/ C. RESET or 2 or PROGRAM NUMBER 4 DATE ––/–– START TIME – – : – – – – END TIME – – : – – – – CHANNEL –– REC SPEED – – Select an empty program number 10 • 6 ONE TIME PROGRAM or 3 PROGRAM NUMBER 4 or Select the desired month ONE TIME PROGRAM or PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME – – : – – – – END TIME – – : – – – – CHANNEL –– REC SPEED – – Select the desired day or • You can program one year in advance. PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME 0 7 : 3 0 PM END TIME – – : – – – – CHANNEL –– REC SPEED – – AM B PM Select “AM” or “PM” B ONCE DAILY WEEKLY Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY” 4 PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME 0 7 : 3 0 PM END TIME 0 8 : 3 0 PM CHANNEL 16 REC SPEED SP B SP SLP 7 Repeat the procedure in steps 5 and 6 to set the end time. 8 ONE TIME PROGRAM or PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME 0 7 : 3 0 PM END TIME 0 8 : 3 0 PM CHANNEL 16 REC SPEED – – Select the desired channel • If you have connected the DVD/VCR to a cable box or satellite box as the Connection A on page 6, select the VCR to channel 3 or 4 (the RF output channel of the cable or satellite box). Then, select the channel to be recorded at the cable box or satellite box. Leave the cable box or satellite box on for timer recording. – 12 – SUBTITLE T-SET light on the front panel appears. The DVD/VCR will change to the DVD mode. Hint • To go back one step, press the s button (during the steps [3] to [9].) To Check, Correct, or Cancel a Timer Program 1) Press the SUBTITLE/T-SET button then, the VCR button on the remote control. 2) Select main menu by pressing the MENU button. 3) Select "TIMER PROGRAMMING" by pressing the K or L button. Then, press the B button. 4) Select the program number which you want to check by pressing the K or L button. The details of the program you selected will appear on the TV screen. • Go to the digit you want to change by pressing the B or s button. Then, enter correct numbers by pressing the K or L button. • You may cancel the entire program by pressing the s button while the program number flashes. 5) Press the CLEAR/C.RESET button to exit. 6) Press the SUBTITLE/T-SET button to return to timer stand-by mode. To cancel a Timer Recording in progress Press the STOP/EJECT button on the DVD/VCR. EN H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 13 DVD Operation During Timer Recording • If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If a tape is not in the DVD/VCR or does not have the record tab, the light flashes and timer recording cannot be performed. Please insert a recordable tape. • If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the light flashes. (If the DVD power is off, the VCR will become STANDBY status). • When all timer recordings are finished, the light will flash. • When timer recordings are set, the light will appears. To use the VCR as usual until the time for the recording, press the SUBTITLE/TSET button so that the light disappears. Press the VCR/TV button to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual. If you want to use the DVD player during a VCR timer recording or while the light is on or flashes. • You can use the DVD player while the light is on or flashes, or during a timer recording. Press the POWER button to turn on the DVD. Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to use the DVD only. Copying a Video Tape Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. 1) Insert a pre-recorded tape into the playing VCR. 2) Insert a tape with its record tab into the recording DVD/VCR. 3) Press the SPEED button on the remote control of the or Connect recording DVD/VCR to select the desired recording Connect speed (SP/SLP). RF cable 4) Select the "L1" or "L2" position on the recording DVD/VCR. (supplied) • To use the input jacks on the back of this unit, select Audio/Video cables *Front input jacks are also available (supplied) "L1" position by pressing [0], [0], [1] on the remote control or the CHANNEL buttons. Hint • To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote • For best results during dubbing, use the front panel controls whenever possible. control or the CHANNEL buttons. The remote control might affect another source’s operation. • Always use video-quality shielded cables with RCA-type connectors. Standard 5) Press the REC/OTR button on the recording DVD/VCR. audio cables are not recommended. 6) Begin playback of the tape. • You can use a video disc player, satellite receiver, or other audio/video compo7) To stop recording, press the STOP/EJECT button on nent with A/V outputs. the recording DVD/VCR, then stop playback of the tape • “L1” or “L2” is found before the lowest memorized channel. (Example: CH02) in another source. (Back of TV) (Back of another source) AUDIO OUT VCR AUDIO IN ANT-IN Y L CB R L R DVD AUDIO S-VIDEO OUT OUT DIGITAL AUDIO OUT DVD/VCR COMPONENT VIDEO OUT AUDIO OUT 2 VCR AUDIO IN ANT-IN L Y L L R CB VIDEO IN VIDEO OUT VIDEO OUT ANT-OUT CR COAXIAL R VIDEO OUT R R VIDEO IN ANT-OUT CR • “L2” input jacks are on the front of this DVD/VCR. MTS System (Multi-Channel Television Sound) When You Receive or Record a Program Broadcast in MTS • When you receive a broadcast on the VCR, you can check the type of the broadcast by pressing the DISPLAY button. • When "TV STEREO" or "SAP" selection is valid, select them by following steps. This selection is needed when you record the program. • SAP means Second Audio Program (usually second language). VCR VCR VCR 1 VCR 1 MENU -MENU- -MENUTIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT B AUDIO OUT TV STEREO [ON] SAP TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT B TV STEREO [ON] SAP or MENU or Select “TV STEREO” or “SAP” 2 To exit the menu. CLEAR/ C. RESET 2 AUDIO OUT B HIFI Display on the TV screen Type of broadcast STEREO/SAP Selection -None- Regular (monaural audio) -Invalid- STEREO Stereo broadcast SAP Bilingual broadcast STEREO SAP Stereo & Bilingual broadcast -InvalidTV STEREO (main audio program) SAP (second audio program) TV STEREO (stereo main audio program) SAP (second audio program) When You Play Back a Tape Recorded in Hi-Fi Stereo or • If you have connected a stereo TV to this DVD/VCR, select "STEREO". • If you have connected a monaural TV to this DVD/VCR, select "MONO". Your Selection STEREO Select “HIFI” or “MONO” MONO Type of recorded tape L-channel R-channel non Hi-Fi tapes Monaural Monaural Monaural Hi-Fi tapes recorded in Hi-Fi stereo L R L+R Hi-Fi tapes recorded main audio program Main audio program Main audio program Main audio program Hi-Fi tapes recorded second audio program [ON] MONO 3 To exit the menu. CLEAR/ C. RESET Second audio Second audio Second audio program program program – 13 – EN VCR Functions AUDIO OUT 1 L DVD/VCR COMPONENT VIDEO OUT (Back of Recording DVD/VCR*) H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 14 Special Features Time Search Index Search You can select a specific time for fast forwarding or rewinding. • Insert a tape into this unit. You can specify the number of programs to be skipped. • Insert a tape into this unit. VCR You can repeat playback of a whole tape automatically. • Insert a tape into this unit. VCR VCR VCR VCR 1 TIME SEARCH x2 (Twice) VCR 1 1 INDEX SEARCH SEARCH MODE –:–– SEARCH MODE 2 Auto Repeat x1 (Once) Select the desired length of time for fast forwarding or rewinding or 2 03 or 2 or 01 ~ 20 CURRENT PROGRAM Beginning of tape VCR Functions Pro.1 0:01~ 9:59 (1 minute~9 hours and 59 minutes) 02 Pro.2 01 Pro.3 01 End of tape Pro.4 02 Pro.5 03 INDEX MARK 3 3 To rewind To fast forward To fast forward After searching, 4 PLAYB AUTO REPEAT B Hint After searching, 4 -MENUTIMER PROGRAMMING B AUTO REPEAT [ON] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [ON] SAP 2:50 To rewind -MENUTIMER PROGRAMMING B AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [ON] SAP INDEX SEARCH TIME SEARCH 3 MENU –– • To cancel Auto Repeat, follow steps [1]-[2] above. Then, press the B button, so that [OFF] appears beside AUTO REPEAT. Press the CLEAR/C.RESET button to exit. • If menu remains on the TV screen at step [3], press the CLEAR/C.RESET button to exit. PLAYB Hint • This unit stores index mark at the beginning of the recording. There should be time gap between two index marks for the Index Search. Hint f or Timer Sear c h & Inde x Sear c h • These functions are not available during recording. • Press the STOP button to stop the search. • If the end of the tape is reached during a Search, this unit will cancel the search and rewind the tape. – 14 – EN H9602UD.qx3 04.2.21 0:21 AM Page 15 DVD Functions Playback Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio receiver are set to the correct channel or input. DVD-V ( CD MP3 Hint POWER 1 SPEED AUDIO 1 2 3 4 5 6 7 8 9 0 +10 DISPLAY VCR DVD ) ⇒p.16 OPEN/CLOSE /EJECT SKIP/CH. 1 5 VCR/TV DVD SLOW 1 2 POWER Remote Control TV Screen PLAY STOP REC/OTR 4 2 STOP PLAY OPEN/CLOSE OUTPUT VCR POWER REW F.FWD STOP/EJECT PLAY REC/OTR DISC IN STOP PLAY G SKIP / L -- AUDIO -- R 5 DVD SKIP H CHANNEL VIDEO REV FWD OPEN/CLOSE /EJECT 1 1 5 DVD menu DVDs may contain menus to access special features. Press appropriate Number buttons or use the arrow (K/L/s / B) buttons to highlight your selection on the DVD main menu and press the ENTER button to confirm. Calling up a Menu Screen during Playback • Press the MENU button to call up the DVD menu. • Press the TOP MENU button to call up the title menu. Resume CD To use the SKIP/REV, FWD/SKIP buttons on the Main Unit DVD-V MP3 Press the STOP button. Resume message will appear on the TV screen. Press the PLAY button, playback will resume from the point at which playback was Press 'PLAY' to play from here. To play the beginning, stopped. press 'STOP' first and then 'PLAY'. • To cancel resume, press the STOP button one more time during the Stop mode. • For MP3, playback will resume from the beginning of the track at which playback was stopped. CD MP3 DVD-V CD MP3 Press the g or h button repeatedly durE1 ing playback to select the required forward or reverse speed. To continue k, press the PLAY continue playbac playback, PLAY b utton. • For DVDs, fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(x2),2(x8),3(x50),4(x100). • For Audio CDs, approximate speed is x16. • For MP3, approximate speed is x8. Hint • Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow playback mode are blurred. (Refer to pages 20-21.) Slow Forward/Slow Reverse Paused and Step-by-Step Playback DVD-V CD Press once to skip chapters or tracks to a desired point. Press and hold to change forward or reverse playback speed. Fast Forward/Reverse Search Note • Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for details. DVD-V 4 3 DVD-V 1 Press the g or h button repeatedly during the pause mode to select the required forward or reverse speed. To continue k, press the PLAY continue playbac playback, PLAY button. button. • Slow forward or reverse speed is different depending on the disc. Approximate speed is 1(1/16),2(1/8),3(1/2). MP3 Press the PAUSE button during playback. To continue k, press the PLAY continue playbac playback, PLAY b utton. DVD-V The disc goes forward by one frame each time the PAUSE button is pressed during the pause mode. To continue k, press the PLAY continue playbac playback, PLAY button. button. Hint • Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow playback mode are blurred. (Refer to pages 20-21.) Hint • Set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause mode are blurred. (Refer to pages 20-21.) – 15 – EN DVD Functions 3 3 4 OPEN/CLOSE /EJECT PAUSE • When you play an MP3 file, details on page 16. • A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit. • Some DVDs may be played from title 2 or 3 due to specific programs. • During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction. H9602UD(EN)v1.qx3 04.2.20 11:41 PM Page 16 MP3 Playback MP3 is a method of compressing files. You can copy MP3 files on CD-R/RWs from a computer and play the files on this unit. 2 DVD MP3 STOP Insert a MP3-format disc, then press the MENU button to call up the MP3 menu on the TV screen. 1 Hint MENU FILE LIST FOLDER MP3 ENTER PLAY ENTER DISC NAME folder name 1 folder name 2 folder name 3 folder name 4 file name 1 file name 2 file name 3 1/2 folder name 1 When selecting the folder: • Press the B button when you want to go to the next hierarchy. • Press the s button when you want to go back to the previous hierarchy. • Some selections may take a while to be recognized. • Press the TOP MENU button to return to the first item. • Folders are known as Groups; files are known as Tracks. • MP3 files are accompanied by 3 icon. • Folders are accompanied by icon. • A maximum of 255 folders can be recognized. • A maximum of 512 files can be recognized. • Up to 8 hierarchies can be created. This player recommends the files recorded under the following circumstances: • Sampling frequency: 44.1kHz or 48kHz • Constant bit rate: 112kbps ~ 320kbps. The On-Screen Display You can check the information about the DVD disc by pressing the DISPLAY button on the remote control. DVD DVD DVD-V CD DISPLAY Current playback status DISPLAY 4/12 0:03:21 - 0:02:15 T Remaining time of the current track Current playback status 11/16 0:00:00 - 0:03:30 Elapsed time of the current track Remaining time of the current chapter Elapsed time of the current chapter DVD Functions DISPLAY CH(Chapter): Current chapter number / Total chapters 4/12 0:13:45 - 0:45:40 1/3 TR(Track): Current track number / Total tracks DISPLAY T 0:00:00 - 1:23:45 Remaining time of the current title Elapsed time of the current title DISPLAY T TT(Title): Current title number / Total titles DISPLAY L1 DVD Layer numbers, appears only when playing a two-layered Disc L0: Layer 0 is playing L1: Layer 1 is playing Current repeat setting appears only when the repeat setting is active C: Chapter repeat / T: Title repeat / A B: A-B repeat DISPLAY ALL: Current track number / Total tracks Current repeat setting appears only when the repeat setting is active T: Track repeat A: All Tracks repeat A B: A-B repeat Remaining time of the current audio CD Elapsed time of the current audio CD BIT RATE: The amount of audio and video data currently being read MP3 DISPLAY Current playback status TRACK 01 The name of the file currently in play will be displayed. DISPLAY TR(Track): Current Track number / Total Tracks 1/36 0:01:15 T Current Repeat setting, if active T: Track repeat G: Group (folder) repeat A: Disc repeat DISPLAY – 16 – Elapsed playing time of the current track EN H9602UD(EN)v1.qx3 04.2.20 11:42 PM Page 17 Search Function Track Search Title / Chapter Search DVD DVD MP3 Using the number buttons 1 1 2 3 4 5 7 8 9 0 +10 DVD DVD-V DVD-V Using the SEARCH MODE button 1 SEARCH MODE x1(Press once) for the chapter search x2 (Press twice) for the title search 2 1 2 3 4 5 6 7 8 9 0 +10 Using the SEARCH MODE button 1 3 5 6 7 8 9 0 +10 2 3 4 5 6 7 8 9 TOTAL 1:29:00 Within 30 seconds • e.g. When there is no need to enter a number, “0” appears automatically. For example, “0:0_:_ _” appears in the Time Search display if the total time of the disc is less than 10 minutes. PLAY /2 Current Chapter (CH) Within 30 seconds Using the SKIP H , G buttons 1 PLAY Current Track (TR) SKIP/CH. 1 Within 30 seconds Using the SKIP H , G buttons 1 2 x repeatedly until this screen appears 0 /2 4 2 /12 SEARCH MODE 1 TOTAL 1:29:00 /2 •For single digit tracks (1-9), press a single number (eg. track 3, press 3). •To play track 26, press +10, 2, 6 of the Number buttons. 2 PLAY /12 SEARCH MODE 6 1 CD SKIP TR 1 TR 2 TR 3 TR 4 SKIP SKIP/CH. SKIP CH 1 CH 2 CH 3 CH 4 SKIP Note ¡Depending on the disc being played, this function can also be performed by directly entering the desired chapter number with the number buttons. Refer to the manual accompanying the disc. Marker Setup DVD DVD-V CD This feature allows you to assign a specific point on a disc to be called back later. To return to the marker later 1 To set a marker 1 To e xit the marker screen 1 RETURN PLAY PLAY SEARCH MODE SEARCH MODE x repeatedly until this screen appears x repeatedly until this screen appears Notes ¡Opening the disc tray or turning off the power will erase all markers. ¡Selecting “AC” at step [2] in the section “To set a marker” will also erase all markers. ¡To clear a marker, select the marker to be cleared at step [2] in the section “To return to the marker later,” and then press the CLEAR/C.RESET button. 2 2 or or 3 3 ENTER ENTER at the desired marker •Playback will restart from the specific point which you set. – 17 – EN DVD Functions CD Time Search H9602UD(EN)v1.qx3 04.2.20 11:42 PM Page 18 Repeat / Random / Programmed Playback Repeat Playback Repeat A-B Playback Programmed Playback DVD DVD-V CD MP3 DVD DVD-V DVD CD CD 1 You may determine the order in which tracks will play. PLAY A- Repeat function is available only during playback. 1 MP3 1 STOP A-B CD-DA TOTAL 0:00:00 CD-DA TOTAL 0:08:00 PLAY at your desired starting point (A). 2 REPEAT 2 Each time the REPEAT button is pressed... or at your desired end point (B). DVD-V CHAPTER (current chapter repeat) (current title repeat) OFF (repeat off) TRACK (current track repeat) ALL (entire disc repeat) OFF (repeat off) TRACK (current track repeat) GROUP (current group repeat) ALL (entire disc repeat) CD ENTER x1 (Press once) A-B A-B TITLE MODE 8 3:30 9 2:30 10 1:30 ¡Point B should be in the same title ALL CLEAR ENTER or track as point A is. 2/2 8 3:30 ¡To exit the sequence, press the A-B ENTER Up to 99 programs can be stored. While a MP3 folder is open: • For the next hierarchy, press the B button. • For the previous hierarchy, press the s button. • When there are more than eight tracks, press CH.L button to see the next page. button. ¡To cancel Point A, press the CLEAR/C.RESET button. ¡This function does not work in the other repeat modes. Random Playback This shuffles the playing order of tracks instead of playback in the sequence. MP3 DVD CD PLAY MP3 1 RANDOM STOP CD-DA DVD Functions (repeat off) ¡Repeat setting will be cleared when moving to another title, chapter, or track. ¡Repeat playback are not available with all discs or during repeat A-B playback. TOTAL 0:45:55 RANDOM PROGRAM --no indication-- MODE OFF 3 PLAY x2 (Press twice) 2 PLAY Note ¡If you want to repeat the current track in the random selections, press the REPEAT button repeatedly until TRACK appears during playback. If you want to repeat the entire random selections, press the REPEAT button repeatedly until ALL appears during playback. Notes ¡Press the CLEAR/C.RESET button at step [2] to erase the most recently entered program. ¡To erase all programs at once, select “ALL CLEAR’’ and press the ENTER button at step [2]. ¡While a program is being played back, the STOP button works as follows; ⇒Press the STOP button and then PLAY button, so that the programmed playback restarts. (CD playback restarts from the current point. MP3 playback restarts from the beginning of the current track.) ⇒Press the STOP button twice and then PLAY button, so that playback restarts from the first track in the original order. However, your programmed playback can be restarted when you follow the above steps. (Your programs are still stored until either the disc tray is open or power is turned off.) ¡To repeat the current track in the program, press the REPEAT button repeatedly until “ TRACK’’ appears during playback. ¡To repeat the entire program press the REPEAT button repeatedly until “ ALL’’ appears during playback. – 18 – EN H9602UD(EN)v1.qx3 04.2.20 11:42 PM Page 19 Special Settings Subtitle Language Audio Language DVD Stereo Sound mode DVD DVD-V DVD DVD-V CD This unit allows you to select a subtitle language (if available) during DVD playback. This unit allows you to select an audio language (if multiple languages are available) during DVD playback. This unit allows you to select a sound mode during CD playback. 1 1 1 1.ENG/6 PLAY AUDIO AUDIO SUBTITLE T-SET Each time you press the SUBTITLE/TSET button, subtitle languages change. Each time you press the AUDIO button; For example For example (English subtitles) FRE (French subtitles) OFF (no subtitles) ENG (English audio) SPA (Spanish audio) ... ... ENG FRE PLAY 1.ENG/6 SUBTITLE T-SET 2 OFF (French audio) Camera Angle To set subtitle ON/OFF 1 STEREO 1.ENG Dolby D 3/2.1ch 48k/3 Each time you press the AUDIO button; STEREO (right and left channels are active) (left channel is active) L-CH (right channel is active) R-CH Note ¡If the Virtual Surround setting is “1’’ or “2’’, the sound mode will be fixed to STEREO, and can not be changed. Virtual Surround DVD DVD-V Some DVD discs may contain scenes which have been shot simultaneously from various angles. You can change the camera angle if the ( ) icon appears on the screen. If the “ANGLE ICON” setting is “OFF” in the Display menu, the ( ) icon will not appear. (Refer to pages 20-21.) DVD-V CD MP3 DVD You can enjoy simulated surround sound on your existing 2 channel stereo system. 1 PLAY DVD Functions PLAY PLAY OFF 1 V.SURR. PLAY Notes ¡If your language is not shown after pressing the AUDIO or SUBTITLE/TSET button several times, the disc may not have that language. However, some discs allow audio language or subtitle language setting on the disc menu. (Operation varies depending on the discs, so refer to the manual along with the disc.) ¡When “NOT AVAILABLE” appears on the TV screen, it means no subtitle is recorded on the scene. ¡If you choose a language that has a 3 letter language code, the code will be displayed every time you change the subtitle language setting. If you choose any other languages, ‘---’ will be displayed instead. (Refer to page 24.) 1/8 ANGLE 2 V.SURR. Black Level Setting DVD 1: Natural effect 2: Emphasized effect OFF: No effects (original sound) DVD-V Adjust the Black Level Setting to make the dark areas of the TV picture brighter. 1 PLAY 3 RETURN ON Note (for CD play back only) ¡Virtual Surround will not be effective if the sound mode is set to something other than STEREO and will not work when using the digital audio output. MODE 2 1 ENTER OFF ON: Makes the dark areas brighter. OFF: Shows the original picture as recorded. 3 RETURN – 19 – EN H9602UD(EN)v1.qx3 04.2.20 11:42 PM Page 20 DVD DVD Set Up Q UICK SETUP Men u You can select the “PLAYER MENU”, “TV ASPECT”, or “DOLBY DIGITAL” from the QUICK SETUP menu quickly. 1 2 or SETUP STOP Select the desired item <SETUP MENU> Confirm that QUICK is selected ENTER SETUP QUICK SETUP PLAYER MENU TV ASPECT DOLBY DIGITAL QUICK CUSTOM INITIALIZE P20 A (Step 5) P21 B (Step 5) P21 C (Step 5) ENGLISH 4:3 LETTER BOX ON ENTER •Refer to the sections “PLAYER MENU”, “TV ASPECT”, or “DOLBY DIGITAL” section on page 20 or 21. CUSTOM Men u You can change the DVD player’s settings. 1 2 SETUP STOP <SETUP MENU> 3 or ENTER or to decide To select the desired item Select CUSTOM ENTER SETUP QUICK CUSTOM INITIALIZE DISPLAY menu LANGUAGE SETUP CUSTOM LANGUAGE DISPLAY AUDIO PARENTAL QUICK CUSTOM INITIALIZE LANGUAGE menu SETUP SETUP SETUP AUDIO menu DISPLAY SETUP PARENTAL menu SETUP AUDIO PARENTAL DVD Functions PASSWORD AUDIO SUBTITLE DISC MENU PLAYER MENU ORIGINAL OFF ENGLISH ENGLISH TV ASPECT STILL MODE ANGLE ICON AUTO POWER OFF page 20 A A 4:3 LETTER BOX AUTO ON ON DRC DOWN SAMPLING DOLBY DIGITAL page 21 B ON ON ON Please enter a 4-digit password. page 21 C page 22 D LANGUAGE Setting Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20. 4 5 Select the desired item or LANGUAGE menu SETUP AUDIO SUBTITLE DISC MENU PLAYER MENU LANGUAGE ORIGINAL OFF ENGLISH ENGLISH ENTER Select the desired language ENTER 6 To exit the menu or AUDIO ∗1 ∗2 (Default: ORIGINAL) Sets the audio language. AUDIO ORIGINAL ENGLISH FRENCH SUBTITLE: ∗1 ∗2 (Default: OFF) Sets the subtitle language. SUBTITLE OFF ENGLISH FRENCH DISC MENU: ∗1 (Default: ENGLISH) Sets the language for DVD menu. DISC MENU ENGLISH FRENCH SPANISH PLAYER MENU: QUICK (Default: ENGLISH) Sets the language for the On-screen display. PLAYER MENU ENGLISH FRANÇAIS ESPAÑOL – 20 – SETUP Hint ∗1 • Language options are not available with some discs. • If OTHER is selected on the AUDIO, SUBTITLE or DISC MENU screen, press four-digit number to enter the code for the desired language. (Refer to the language code list on page 24.) • Only the languages supported by the disc can be selected. ∗2 • Language Setting for Audio and Subtitle is not available with some discs. Then use the AUDIO and the SUBTITLE/T-SET button. Details are on page 19. EN H9602UD(EN)v1.qx3 B 04.2.20 11:42 PM Page 21 TV Display Selection You can change the display functions. Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20. 4 Select the desired item or 5 6 To exit the menu SETUP TV ASPECT: (Default: 4:3 LETTER BOX) See Hint to the right. QUICK Select the desired setting ENTER TV ASPECT TV ASPECT STILL MODE ANGLE ICON AUTO POWER OFF DISPLAY menu SETUP DISPLAY TV ASPECT STILL MODE ANGLE ICON AUTO POWER OFF 4:3 LETTER BOX AUTO ON ON 4:3 LETTERBOX AUTO ON ON ENTER 4:3 LETTER BOX 4:3 PAN & SCAN 16:9 WIDE or Hint STILL MODE: (Default: AUTO) See Hint to the right. Select the desired setting ENTER STILL MODE TV ASPECT STILL MODE ANGLE ICON AUTO POWER OFF 4:3 LETTERBOX AUTO ON ON AUTO FIELD FRAME or ENTER ANGLE ICON: (Default: ON) Set to “ON” to show the angle icon when multiple camera angles are available during DVD playback. TV ASPECT STILL MODE ANGLE ICON AUTO POWER OFF 4:3 LETTERBOX AUTO ON ON 4:3 LETTERBOX AUTO OFF ON ENTER AUTO POWER OFF: (Default: ON) Set to “ON” to turn this unit off automatically after 35 minutes of no use. TV ASPECT STILL MODE ANGLE ICON AUTO POWER OFF 4:3 LETTERBOX AUTO ON ON TV ASPECT: • Select “4:3 LETTER BOX”, so that black bars appear on the top and bottom of the screen. • Select “4:3 PAN & SCAN” for a full height picture with both sides trimmed. • Select “16:9 WIDE” if a wide-screen TV is connected to this unit. STILL MODE: • Select “AUTO”. If your TV picture is not clear, review 2 options below. • If you select “FIELD”, the picture in the still mode will be stabilized. • If you select “FRAME”, the picture in the still mode will be highly defined. 4:3 LETTERBOX AUTO ON OFF C AUDIO Setting Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20. 4 Select the desired item or AUDIO DRC DOWN SAMPLING DOLBY DIGITAL 6 To exit the menu ON ON ON SETUP DRC (Dynamic Range Control): (Default: ON) Set to “ON” to compress the range between soft and loud sounds. DRC ON DOWN SAMPLING ON DOLBY DIGITAL ON AUDIO menu SETUP 5 ENTER OFF ON ON DOWN SAMPLING: (Default: ON) Set to “ON” when outputting in 48 kHz. Set to “OFF” when outputting the original sound. DRC ON DOWN SAMPLING ON DOLBY DIGITAL ON ENTER ON OFF ON DOLBY DIGITAL: QUICK (Default: ON) Set to “ON” when the unit is connected to a Dolby Digital receiver. • ON: Outputs a Dolby Digital Signals • OFF: Convert the Dolby Digital into PCM (2 channel) DRC ON DOWN SAMPLING ON DOLBY DIGITAL ON Hint DRC: • This function is available only on the discs which are recorded in the Dolby Digital format. DOWN SAMPLING: • When playing disc with copyright Protection, the sound will be down sampled at 48kHz, even if you set to OFF. • This function is available only on digital output of a disc recorded in 96kHz. ON ON OFF ENTER – 21 – EN DVD Functions ENTER H9602UD(EN)v1.qx3 D 04.2.20 11:42 PM Page 22 PARENTAL Setting Parental Control limits the disc viewing that exceed your settings. (an incorrect password will not play.) This feature prevents your children from viewing inappropriate materials. Parental Le vels Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set. Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20. 4 5 Enter your desired fourdigit password (except for 4737) 1 2 5 6 7 8 9 SETUP ENTER ENTER PARENTAL LEVEL CHANGE To exit the menu or ENTER 0 7 Select the desired levels or 3 4 6 Select “PARENTAL LEVEL” PARENTAL LEVEL ALL 8 7 [NC-17] 6 [R] ALL PARENTAL menu SETUP PARENTAL PASSWORD Please enter a 4-digit password. Hint CONTROL LEVELS • ALL: All parental locks are cancelled. • Levels 8: DVD softwares of any grades (adult/general/children) can be played back. • Levels 7 to 2: Only DVD softwares intended for general use and children can be played back. • Level 1: Only DVD softwares intended for children can be played back, with those intended for adult and general use prohibited. or If you have set a password already, enter the current four-digit password. SETUP PARENTAL PASSWORD Enter current password. To Chang e the Pass w or d f or Parental Controls You can change your password for parental controls. Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20. DVD Functions 4 5 Enter your desired fourdigit password (except for 4737) 1 2 3 4 5 6 7 8 9 6 Select “CHANGE” To exit the menu SETUP or ENTER PARENTAL LEVEL CHANGE 7 Enter your new four-digit password (except for 4737) 1 2 3 4 5 6 7 8 9 ENTER ALL 0 0 Hint PARENTAL menu SETUP SETUP PARENTAL PASSWORD Please enter a 4-digit password. PARENTAL PASSWORD Enter current password. • Record the password in case you forget it. • If you forget the password, press 4, 7, 3, 7 at step 4, then enter your new password. • Password will be cleared and parental levels will be set to ALL. To return the All Selections of SET UP (except for PARENTAL) to the Default Setting 2 1 4 3 or or To exit the menu SETUP STOP SETUP ENTER ENTER Select “YES” Select INITIALIZE <SETUP MENU> SETUP SETUP SETUP QUICK CUSTOM INITIALIZE Initialize? NO YES QUICK CUSTOM INITIALIZE – 22 – INITIALIZE x2 (twice) Hint • When you cancel to initialize at step 3,select “NO”. EN H9602UD.qx3 04.2.21 0:21 AM Page 23 Information Troubleshooting Guide If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist. PROBLEM V C R D V D • • • • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. This unit does not respond to • Check if the power plug is connected to an AC outlet. the remote control. • Check the batteries in the remote control. • Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote. • You have to be within 23 feet of this unit. • Check if the right mode is selected. If it’s not in the right mode, press the DVD or VCR buttons, whichever you need, on the remote control. • Check if a cassette tape is in this unit. • Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then. If you hear some signal sound from the radio in response to your pressing buttons on the remote, the remote control is working. Timer recording is impossible. • Make sure the timer recording is set correctly. • Make sure the light appears on the DVD/VCR. If not, press the SUBTITLE/T-SET button. • Make sure the VCR clock is set correctly. Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape. • Activate this unit in VCR mode. Press the VCR button on the remote control so that the green VCR OUTPUT light is lit. ) buttons Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL ( on the DVD/VCR or the SKIP/CH.(K/L) buttons on the remote control. Cannot view a tape but the • Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” . audio is OK. • Make sure the VCR is not in the Menu mode. No, or poor, playback picture. • Change the RF output channel to CH4. Then select the same channel on the TV. • Fine tune your TV. TV programs cannot be seen • Re-check the ANT. IN and ANT. OUT connections. See pages 1 and 6. normally. • Press the VCR/TV button. • Press the VCR button on the remote control to activate it in the VCR mode. Check if the green VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button. Video or color fades in and out when • You cannot copy a copyrighted video tape. You are experiencing copy guard protection. making a copy of a video tape. Cannot remove the tape. • Check if this unit is in the VCR mode. If not, press the VCR button on the remote control to switch the mode. No picture. • Connect the video cables firmly. • Insert a correct video disc that plays on this unit. • Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features. • Insert the disc. Disc cannot be played. • Clean the disc. • Place the disc correctly with the label side up. • Cancel the parental lock or change the control levels. • Handle a disc with special care so that it does not have fingerprints, scratches, or dust on its surface. • Connect the audio cables firmly. No sound. • Turn the power of the audio component on. • Correct the audio output settings. • Correct the input settings on the audio component. • This unit does not support DTS audio. This is not a malfunction. No DTS audio is output. • Connect this unit directly to the TV. Distorted picture. • There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction. • Although pictures may stop for a moment, this is not a malfunction. Audio or subtitle language • The selected language is not available for audio or subtitles on the DVD. does not match the set up. This is not a malfunction. The camera angle cannot be • The DVD does not contain sequences recorded from different camera angles. changed. This is not a malfunction. Audio or subtitle language • The DVD does not contain audio source or subtitles in the selected language. cannot be changed. This is not a malfunction. “Prohibited icon” appears on the • That operation is prohibited by this unit or the disc. screen, prohibiting an operation This is not a malfunction. Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations. Playback from a desired track and random playback are not available during program playback. Some functions are prohibited on some discs. – 23 – EN Information D V D V C R CORRECTIVE ACTION No power. H9602UD(EN)v1.qx3 04.2.20 11:42 PM Page 24 Specifications Video Heads : Operating temperature : Four Heads • Designs and specifications are subject to change without notice. • If there is a discrepancy between languages, the default language will be English. 41°F (5°C) to 104°F (40°C) Output signal format : Dimensions : NTSC color W : 17 3/16”(435mm) H : 3 3/4” (94mm) D : 9 3/16” (233mm) Power source : 120 V AC +/- 10%, 60 Hz +/- 0.5% Weight : Power consumption : Approx 6lbs (2.7kg) 21 W (standby: 3.6W) Language List Code A-B Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian C-E Cambodian Catalan Chinese [CHI] Corsican Croatian Czech Danish [DAN] Dutch [DUT] English [ENG] Esperanto Estonian F-H Faroese Fiji Finnish [FIN] 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166 5261 5256 5255 Language Code Language Code Language Code French [FRE] Frisian Galician Georgian German [GER] Greek [GRE] Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian [HUN] I-K Icelandic [ICE] Indonesian Interlingua Interlingue Inupiak Irish [IRI] Italian [ITA] Japanese [JPN] Javanese Kannada Kashmiri Kazakh Kinyarwanda Kirghiz Kirundi Korean [KOR] Kurdish L-N Laothian Latin Latvian;Lettish Lingala Lithuanian 5264 5271 5358 5747 5051 5158 5758 5360 5367 5447 5569 5455 5467 Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian [NOR] O-R Occitan Oriya Oromo(Afan) Panjabi Pashto;Pushto Persian Polish Portuguese [POR] Quechua Rhaeto-Romance Romanian [RUM] Russian [RUS] S Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese 5957 5953 5965 5958 5966 5955 5964 5961 5960 6047 6051 6061 Siswat Slovak Slovenian Somali Spanish [SPA] Sundanese Swahili Swedish [SWE] 6565 6557 6558 6561 5165 6567 6569 6568 5565 5560 5547 5551 5557 5347 5566 5647 5669 5760 5765 5757 6469 5771 6460 5761 5767 5861 5847 5868 5860 5866 6149 6164 6159 6247 6265 5247 6258 6266 6367 6459 6461 6467 6559 6553 6547 5350 6564 6554 6566 6660 6560 6550 6555 T Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish [TUR] Turkmen Twi 6658 6653 6647 6666 6651 6654 4861 6655 6661 6665 6664 6657 6669 U-Z Ukrainian Urdu Uzbek Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu 6757 6764 6772 6855 6861 4971 6961 7054 5655 7161 7267 If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.) Get it fixed, at your home or ours! Your Home For repair- in your home -of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. Information For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME R LIMITED 90 DAY WARRANTY If this (product) experiences any failure due to a defect in material or workmanship within 90 days from the date of purchase, return it to your nearest Sears store, and it will be replaced free of charge. (1-800-469-4663) Call anytime, day or night (U.S.A. and Canada) www.sears.com www.sears.ca This warranty applies only if this (product) is used for private household purposes. Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call or go on-line for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Call anytime, day or night (U.S.A. only) www.sears.com To purchase a protection agreement on a product serviced by Sears: 1-800-827-6655 (U.S.A.) Para pedir servicio de reparación a domicilio, y para ordenar piezas: 1-888-SU-HOGAR SM (1-888-784-6427) R R 1-800-361-6665 (Canada) Au Canada pour service en français: 1-800-LE-FOYERMC (1-800-533-6937) www.sears.ca Registered Trademark / TM Trademark / SM Service Mark of Sears, Roebuck and Co. Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears, Roebuck and Co. Marque de commerce / MD Marque déposée de Sears, Roebuck and Co. MC This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., D/817WA, Hoffman Estates, IL 60179 For the location of a Sears store in your area : 1-800-488-1222 © Sears, Roebuck and Co. – 24 – EN ✄ Language H9602UD(EN)v1.qx3 04.2.20 11:42 PM Page 25 Español 4 Conexiones Consulte la "Conexión básica del televisor" en la página delantera antes de utilizar esta unidad. Canal de salida RF Activación de la unidad por primera vez 5 Ajuste del reloj VCR VCR VCR 1 VCR Si el canal 3 se está utilizando para una transmisión. 1)Programe su televisor al canal 4. 2)Inserte una cinta pregrabada en esta unidad. 3)Pulse el botón OUTPUT en el DVD/VCR para que se encienda la luz VCR OUTPUT. • Si aparecen ruidos en la pantalla del televisor,pulse el botón VCR/TV en el mando a distancia. 4)Pulse una vez el botón PLAY. 5)Después de unos segundos, pulse el botón PLAY en el DVD/VCR durante 3 segundos. • El canal de salida RF cambiará del canal 3 al canal 4 y podrá ver una imagen reproducida. • Cuando no aparezca una imagen en la pantalla del televisor, repita el paso (4). 6)Pulse el botón STOP para parar la reproducción. -MENU- MENU PROGRAMAR AUTOREPETIR [OFF] AJUSTE CANAL B AJUSTE DE RELOJ SELEC. IDIOMA SALIDA DEL AUDIO TV ESTEREO [ON] SAP 1 Encienda el televisor y sintonice al canal 3. • Si el canal 3 se está utilizando para una transmisión, vea la sección "Canal de salida RF". 2 POWER Mando a distancia • Si no se ha ajustado el reloj, aparece la pantalla AJUSTE DE RELOJ cuando pulse el botón MENU. En este caso, vaya al paso (2). o Pantalla del televisor 2 SELEC. IDIOMA AJUSTE DE RELOJ ENGLISH o o FRANCAIS B ESPAÑOL [ON] HORA MINUTO –– : –– 3 3 CA 01 o ✄ Conecta el cable de la caja de canales de cable o la caja de satélite en la toma ANT IN de DVD/VCR? HORA MINUTO –– : –– 4 SI Si 3 Conmutación VCR/DVD OPEN/CLOSE POWER SPEED AUDIO 1 2 3 4 5 6 7 8 9 0 +10 DISPLAY VCR DVD OPEN/CLOSE /EJECT OUTPUT VCR POWER REW F.FWD STOP/EJECT PLAY REC/OTR L -- AUDIO -- R DVD SKIP H CHANNEL VIDEO DISC IN STOP PLAY G SKIP / REV FWD VCR/TV Botón VCR VCR SLOW PAUSE Botón DVD PLAY STOP DVD REC/OTR Luz DVD OUTPUT Botón OUTPUT AÑO –––– AM/PM –– AJUSTE DE RELOJ o Pulse el botón MENU para salir. MES DIA 03 / 15 HORA MINUTO –– : –– NO No Espere unos minutos. Después del escaneo AÑO 2004 AM/PM –– Seleccione el año actual 5 AJUSTE DE RELOJ SKIP/CH. OUTPUT MES DIA 03 / 15 Seleccione el día actual 3 2 AM/PM –– AJUSTE DE RELOJ Instalación de las pilas del mando a distancia 1 AÑO –––– Seleccione el mes actual AJUSTE AUTO 2 MES DIA 03 / –– • El sintonizador se detiene en el canal memorizado más abajo. • Puede seleccionar sólo los canales memorizados en esta unidad con los botones CANAL. o MES DIA AÑO 0 3 / 1 5 LUN 2 0 0 4 HORA MINUTO 05 : –– AM/PM –– Seleccione la hora actual ENTER MENU RETURN SETUP TOP MENU MODE V.SURR. SEARCH MODE CLEAR/ C. RESET SUBTITLE T-SET ANGLE REPEAT A-B 6 Luz VCR OUTPUT AJUSTE DE RELOJ o MES DIA AÑO 0 3 / 1 5 LUN 2 0 0 4 HORA MINUTO 05 : 40 MODO VCR AM/PM –– Seleccione los minutos actuales Pulse el botón VCR en el mando a distancia. (Compruebe que está encendida la luz VCR OUTPUT.) 7 MODO DVD Pulse el botón DVD en el mando a distancia (Compruebe que está encendida la luz DVD OUTPUT.) AJUSTE DE RELOJ o MES DIA AÑO 0 3 / 1 5 LUN 2 0 0 4 HORA MINUTO 05 : 40 AM/PM P M AM B PM Seleccione "AM" o "PM". Nota • Si pulsa sólo el botón OUTPUT en el panel frontal NO conmuta el modo del mando a distancia. DEBE seleccionar también el modo correcto en el mando a distancia. 8 – 25 – Para salir de la pantalla AJUSTE DE RELOJ. ES Español 1 H9602UD.qx3 04.2.21 0:21 AM Page 26 Español 6 7 Reproducción de la grabadora de vídeo Antes: Encienda el televisor y cambie al canal 3. Reproducción de DVD/CD Antes: Encienda el televisor, amplificador y otros equipos que puedan estar conectados a esta unidad. Asegúrese que el televisor y el sintoamplificador de audio (de venta en los comercios) están en el canal correcto. • Si el canal 3 se está utilizando para una transmisión, vea la sección "Canal de salida RF". DVD VCR 4 VCR 1 2 Mando a distancia POWER Pantalla del televisor REPRODUCIR B PLAY SPEED AUDIO 1 2 3 4 5 6 7 8 9 OPEN/CLOSE /EJECT DVD-V 1 CD OPEN/CLOSE /EJECT POWER 2 POWER 1 SPEED AUDIO 1 2 3 4 5 6 7 8 9 0 +10 DISPLAY VCR DVD SKIP/CH. SKIP/CH. VCR/TV 4 PARAR STOP DISPLAY 0 +10 VCR DVD Mando a distancia Pantalla del televisor 4 SLOW PAUSE PLAY EXPULSAR A STOP REC/OTR PLAY 3 STOP 5 REC/OTR OPEN/CLOSE /EJECT 2 3 4 Mando a distancia Modo DVD Disco/cinta Botón (Orden alfabético) 1 2 3 4 5 6 7 8 9 0 +10 DVD-V • Para seleccionar directamente el capítulo o el título. Modo de grabadora de vídeo CD MP3 • Para seleccionar directamente la canción. • Para buscar en avance/retroceso en un disco. • Para buscar en avance/ • Para empezar la reproducción en avance/ retroceso en un disco. retroceso lento durante el modo de pausa. ENTER POWER 1 SPEED AUDIO 2 3 4 5 6 7 8 9 OPEN/CLOSE /EJECT • Para mover el cursor y determinar su posición. • Para mover el curso y determinar su posición. • Para repetir entre los puntos A y B elegidos (disco compacto) A-B • Para repetir entre los puntos A y B elegidos SKIP/CH. ANGLE • Para seleccionar los ángulos de la cámara en un disco. VCR/TV AUDIO • Para seleccionar el idioma de • Para seleccionar ESTÉREO, audio en un disco. L-CH o R-CH (disco compacto) CLEAR/ C. RESET • Para borrar los marcadores. • Para borrar los números entrados incorrectamente. SLOW DISPLAY 0 +10 VCR DVD PAUSE STOP MENU • Para indicar la hora actual, contador de cinta y canal. • Para indicar el modo de disco actual. • Para seleccionar el modo de salida de DVD • Para activar el mando a distancia en el modo DVD MENU • Para llamar el menu en un disco. • Para llamar el menú MP3 (MP3) MODE • Para activar/desactivar el nivel del negro. • Para disponer el orden de reproducción o la reproducción aleatoria. REC/OTR ENTER SETUP TOP MENU MODE V.SURR. SEARCH MODE CLEAR/ C. RESET SUBTITLE T-SET ANGLE REPEAT A-B RETURN OPEN/CLOSE /EJECT PAUSE PLAY POWER RETURN SEARCH MODE SETUP SKIP/CH. SKIP/CH. • Para abrir o cerrar la bandeja • Para abrir o cerrar la bandeja • Para expulsar el videocasete del disco. del disco. de la grabadora de vídeo. • Para hacer una pausa de la reproducción o grabación de la cinta. • Para avanzar la reproducción un cuadro a la vez. • Para empezar la reproducción de la cinta. • Para activar o desactivar la unidad. • Para activar o desactivar la unidad. • Para activar o desactivar la unidad. • Para empezar una grabaciòn. • Para reproducir repetidamente una canción o disco (Disco compacto) • Para reproducir repetidamente una canción, grupo o disco (MP3). • Para volver a la operación • Para volver a la operación previa en el menú de previa en el menú de programación de DVD. programación de DVD. • Para buscar una canción. • Para buscar un capítulo, título u hora. • Para buscar la hora (Disco compacto) • Para llamar el menú de • Para volver rápidamente a un • Para volver rápidamente a un lugar búsqueda de índice u hora. lugar o disco. o disco. • Buscar los marcadores. • Buscar los marcadores. (Disco compacto) • Para reproducir repetidamente un capítulo o título. • Para llamar el menú de programación de DVD. • Para llamar el menú de programación de DVD. • Para saltar capítulos • Para saltar canciones. Español SPEED SUBTITLE T-SET TOP MENU • Para cambiar de canal. • Para ajustar manualmente el seguimiento durante la reproducción. • Para ver la cinta en cámara lenta. SLOW STOP • Para llamar el menú de la grabadora de vídeo. • Para hacer una pausa de reproducción del disco. • Para hacer una pausa en la • Para avanzar la reproducción reproducción del disco. un cuadro a la vez. • Para empezar la reproducción • Para empezar la reproducción del disco. del disco. REC/OTR REPEAT • Para seleccionar un ítem en el menú de la grabadora de vídeo. • Para avanzar al siguiente menú de la grabadora de vídeo. • Para volver un paso durante el ajuste del reloj y temporizador. • Para salir del menú de la grabadora de vídeo. • Para reponer el contador de cinta. • Para indicar el modo de disco actual. DVD • Para el avance/retroceso de una cinta. • Para borrar los marcadores. (Disco compacto) • Para retirar el Nº de estado en la entrada de programa. • Para borrar los números entrados incorrectamente. • Para seleccionar el modo de salida de DVD. • Para activar el mando a distancia en el modo DVD. DISPLAY PLAY VCR • Para seleccionar el canal. • El botón +10 no tiene efecto en el modo de grabadora de vídeo. ✄ ✄ 8 PAUSE STOP PLAY OPEN/CLOSE /EJECT 1 5 VCR/TV 3 SLOW 3 OPEN/CLOSE /EJECT • Para seleccionar la velocidad de grabación. • Para parar la grabación. • Para parar la grabación. • Para parar la reproducción o grabación. • Para poner la grabadora de vídeo en el modo de espera para una grabación con temporizador. • Para seleccionar subtítulos en un disco. • Para volver al archivo superior • Para llamar el menú superior de la jerarquía más alta en el en un disco. programa y menú MP3. (MP3) • Para seleccionar el modo de salida de la grabadora de vídeo. • Para activar el mando a distancia en el modo de la grabadora de vídeo. VCR VCR/TV • Para seleccionar la posición de DVD o posición del televisor. • Para seleccionar la posición de • Para seleccionar la posición de la CD/MP3 o la posición del televisor. grabadora de vídeo o posición del televisor. V.SURR. • Para activar/desactivar el envolvente virtual. • Para activar/desactivar el envolvente virtual. – 26 – ES H9602UD(EN)v1.qx3 04.2.20 11:42 PM Page 27 Quick Use Guide 1 4 Connections Please refer to “Basic TV Connection” on the front page before you use this unit. RF Output Channel VCR 1 MENU 1 Turn on the TV and set it to channel 3. • If channel 3 is already occupied for broadcasting, see“RF Output Channel” section. 2 POWER Remote Control or • Select CLOCK SET when you press the MENU button. Go to step [2]. TV Screen LANGUAGE SELECT B ENGLISH or -MENUTIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP B CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [ON] SAP 2 CLOCK SET [ON] or FRANCAIS ESPAÑOL MONTH DAY 03 / –– YEAR –––– HOUR MINUTE –– : –– AM/PM –– Select the current month 3 3 CH 01 CLOCK SET or AUTO SET UP MONTH DAY 03 / 15 YEAR –––– HOUR MINUTE –– : –– AM/PM –– Select the current day 3 2 ✄ ✄ Do you connect the cable from the cable box or the satellite box to the DVD/VCR’s ANT IN jack? 4 YES 3 Clock Set Up VCR VCR Installing the Batteries for the Remote Control 1 5 VCR If there is a TV station broadcasting on channel 3, 1)Set your TV to channel 4. 2)Insert a pre-recorded tape into this unit. 3)Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit. • If noise appears on the TV screen, press the VCR/TV button on the remote control. 4)Press the PLAY button once. 5)After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds. • The RF output channel will change to channel 4 from channel 3 and you will see a playback picture. • When a picture does not appear on the TV screen, repeat step [4]. 6)Press the STOP button to stop playback. 2 Turn on the unit for the first time CLOCK SET or Yes Press the MENU VCR/DVD Selection button to exit MONTH DAY 03 / 15 YEAR 2004 HOUR MINUTE –– : –– AM/PM –– Select the current year NO OPEN/CLOSE POWER OPEN/CLOSE /EJECT AUDIO SPEED OUTPUT VCR POWER REW F.FWD STOP/EJECT PLAY REC/OTR CHANNEL VIDEO DVD SKIP H DISC IN STOP PLAY G SKIP / L -- AUDIO -- R REV FWD 1 2 3 4 5 6 SKIP/CH. VCR/TV 7 VCR button 8 9 0 +10 VCR DVD SLOW DISPLAY PAUSE DVD button OUTPUT PLAY STOP VCR DVD REC/OTR DVD OUTPUT light OUTPUT button ENTER MENU No Please wait for a few minutes. After TV station scanning... 5 • The tuner stops on the lowest memorized channel. • You can select only the channels memorized in this unit by using the CHANNEL buttons. CLOCK SET or HOUR MINUTE 05 : –– TOP MENU MODE V. SURR. SEARCH MODE CLEAR/ C. RESET ANGLE REPEAT A-B VCR OUTPUT light AM/PM –– Select the current hour RETURN SETUP SUBTITLE T-SET MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 6 CLOCK SET or VCR MODE MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 HOUR MINUTE 05 : 40 Press the VCR button on the remote control. (Verify that the VCR OUTPUT light is lit.) AM/PM –– Select the current minute DVD MODE 7 Press the DVD button on the remote control. (Verify that the DVD OUTPUT light is lit.) CLOCK SET or MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 HOUR MINUTE 05 : 40 Note AM/PM P M AM B PM Select “AM” or “PM” • Pressing only the OUTPUT button on the front panel DOES NOT switch the mode of the remote control. You MUST select the correct mode on the remote control. 8 – 27 – To exit the CLOCK SET screen. EN H9602UD.qx3 04.2.21 0:21 AM Page 28 Quick Use Guide 6 7 VCR Playback Before: Turn on the TV and set it to channel 3. DVD/CD Playback Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio receiver are set to the correct channel or input. • If channel 3 is already occupied for broadcasting, see “RF Output Channel” section. DVD VCR 4 VCR 1 2 Remote Control PLAY POWER TV Screen PLAYB SPEED AUDIO 1 2 3 4 5 6 7 8 9 OPEN/CLOSE /EJECT DVD-V 1 CD OPEN/CLOSE /EJECT POWER 2 POWER 1 SPEED AUDIO 1 2 3 4 5 6 7 8 9 0 +10 DISPLAY VCR DVD SKIP/CH. SKIP/CH. VCR/TV 4 STOP STOP OPEN/CLOSE /EJECT DISPLAY 0 +10 VCR DVD Remote Control TV Screen 4 SLOW PAUSE PLAY STOP REC/OTR PLAY 3 STOP 5 REC/OTR OPEN/CLOSE /EJECT 2 3 4 Remote Control VCR mode DVD mode Disc/Tape Button (Alphabetical order) 1 2 3 4 5 6 7 8 9 0 +10 DVD-V • To select chapter or title directly. CD VCR MP3 • To select channel. • The +10 button has no effect in VCR mode. • To select track directly. • To search forward/backward through a disc. • To search forward/backward • To begin slow forward/reverse through a disc. playback during the pause mode. ENTER POWER OPEN/CLOSE /EJECT AUDIO SPEED A-B 1 2 3 4 5 6 7 8 9 ANGLE AUDIO SLOW 0 +10 DVD CLEAR/ C. RESET PAUSE DISPLAY PLAY DVD STOP REC/OTR MENU MENU MODE SETUP ENTER TOP MENU RETURN MODE V.SURR. SEARCH MODE CLEAR/ C. RESET SUBTITLE T-SET ANGLE REPEAT A-B • To move the cursor and determine its position. • To repeat between your chosen point A and B. • To repeat between your chosen point A and B. (CD) • To select audio languages on • To select STEREO, a disc. L-CH or R-CH. (CD) VCR/TV VCR • To select an item on the VCR Menu. • To advance to the next VCR Menu. • To go back one step during clock and timer setting. • To move the cursor and determine its position. • To select camera angles on a disc. SKIP/CH. DISPLAY • To forward/backward a tape. ✄ 8 PAUSE STOP PLAY EJECT A 1 5 VCR/TV 3 SLOW 3 OPEN/CLOSE /EJECT OPEN/CLOSE /EJECT PAUSE PLAY • To clear the markers. • To clear the numbers entered incorrectly. • To clear the markers. (CD) • To remove status No. in program input. • To clear the numbers entered incorrectly. • To exit the VCR Menu. • To reset the tape counter. • To display the current disc • To display the current disc • To display the current time, mode. mode. tape counter, and channel. • To select the DVD output • To select the DVD output mode. mode. • To activate the remote control • To activate the remote control in DVD mode. in DVD mode. • To call up the Menu on a disc. • To call up the MP3 menu. (MP3) • To call up the VCR Menu. • To set black level on/off. • To arrange the playing order or play randomly. • To open or close the disc tray. • To open or close the disc tray. • To eject the video cassette from the VCR. • To pause disc playback. • To advance playback one frame at a time. • To pause disc playback. • To pause tape playback or recording. • To advance playback one frame at a time. • To begin disc playback. • To begin disc playback. • To begin tape playback. • To turn the unit on or off. • To turn the unit on or off. • To turn the unit on or off. POWER REC/OTR • To start a recording. REPEAT RETURN SEARCH MODE SETUP SKIP/CH. • To play a track or disc repeatedly. (CD) • To play a track, group or disc repeatedly. (MP3) • To return to the previous • To return to the previous operation on the DVD setup operation on the DVD setup menu. menu. • To search track. • To search chapter, title or time. • To search time. (CD) • To rapidly return to • To rapidly return to a location of disc. a location of disc. • Search the markers. • Search the markers. (CD) • To play a chapter or title repeatedly. • To call up the DVD setup menu. • To call up the DVD setup menu. • To skip chapters. • To skip tracks. • To call up the index or time search menu. • To change channels. • To adjust the tracking manually during playback. SKIP/CH. SLOW • To view the tape in slow motion. SPEED • To select the recording speed. STOP SUBTITLE T-SET TOP MENU • To stop playback. • To stop playback. • To stop playback or recording. • To put the VCR into standby mode for a timer recording. • To select subtitles on a disc. • To call up the Top Menu on a disc. • To return to the top file of the highest hierarchy in the program and MP3 menu. (MP3) • To select the VCR output mode. • To activate the remote control in VCR mode. VCR VCR/TV • To select DVD position or TV position. • To select CD/MP3 position or TV position. • To select VCR position or TV position. V.SURR. • To set virtual surround on/off. • To set virtual surround on/off. Printed in China 0VMN04014 / H9602UD ★★★★★
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project