Sylvania DVD VCR Combo SRDV495 User manual

Sylvania DVD VCR Combo SRDV495 User manual
Before you start
Owner’s Manual
OPEN/CLOSE
POWER
REW
F.FWD STOP/EJECT
ONE TOUCH
DUBBING
PLAY
VCR RECORD
STOP
OUTPUT SELECT
CHANNEL
VCR
PLAY
DVD RECORD
S-VIDEO
VIDEO
L - AUDIO - R
DVD
DVD-RW/-R
Supplied Accessory
• RF cable (WPZ0901TM002)
• Audio/Video cables
(WPZ0102TM015 or WPZ0102LTE01)
• Owner’s Manual (1VMN20233)
• Quick Use Guide (1VMN20319)
• DVD-R Blank Media (3 discs)
Owner's Manual
Others Español
(You CANNOT copy any copyright protected DVD disc with this unit.)
Editing
Before you use this unit, you need to complete connections. Refer to
“Connections” on pages 10-12.
To record a program easily, refer to “Easy DVD recording” on pages 54-55
after connections are completed.
Recording
If you need additional operating assistance after reading this owner’s manual,
please call TOLL FREE : 1-800-968-3429
VCR functions
• Remote control (NB118UD)
with two AA batteries
Playing discs
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Getting started Changing the SETUP menu
SRDV495
Connections
DVD Recorder with Video Cassette Recorder
Before you start
Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature accompanying
the appliance.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU
FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical
wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Serial No.
Retain this information for future reference.
Model No. _____________________
Serial No. _____________________
2
Before you start
Important Safeguards
porting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. (Fig.A)
Connections
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
S2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
VCR functions
Recording
Editing
Others Español
3
Playing discs
14. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind into
this product through any openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
18. Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a.When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions as an improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the product
to its normal operation.
e. If the product has been dropped or damaged in any way.
f.When the product exhibits a distinct change in performance this
indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs to
this product, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
22. Heat - This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
Getting started Changing the SETUP menu
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
EXCEPTION:A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility
of the loss of an authorization code for a CATV converter, is
not intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
6. Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8. Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table.The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the
appliance should follow the manufacturer's
instructions and should use a mounting
accessory recommended by the manufacturer. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered.The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult
your appliance dealer or local power company. For products
intended to operate from battery power, or other sources, refer
to the operating instructions.
11. Grounding or Polarization - This product is equipped with a
polarized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet
only one way.This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
13. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges.Article 810 of
the National Electrical Code,ANSI/NFPA No. 70, provides information with regard to proper grounding of the mast and sup-
Before you start
Precautions (cont’d)
Before you start
Precautions (cont’d)
Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do not
place anything directly on top of the unit. Do not place
the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper heat
dissipation. Do not block the ventilation holes on the
sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If by accident water is spilled on this unit, unplug the
power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the unit cassette
holder.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating
a cold room or under conditions of high humidity. Do not
use this unit at least for 2 hours.
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Notice for progressive scan output
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of
progressive scan picture problems, it is recommended that
the user switch the connection to the interlaced video
output.
Symbol in this owner's manual
Many functions of this unit are depending on the disc type
or the recording mode.
To specify for what disc type or recording mode each
function is, we put the following symbols at the beginning
of each item to operate.
4
Description
Symbol
Available to DVD Video discs
DVD-V
Video
Available to DVD-RW in Video mode
DVD-RW
VR
DVD-RW
Available to DVD-RW in VR mode
DVD-R
Available to DVD-R discs
CD
Available to Audio CDs
MP3
VCR
First:
(Press:)
DVD
First:
(Press:)
VCR
Available to CD-R/RW discs with
MP3 files
Available to VHS tapes
Use only
cassettes marked
with this unit.
Indicates that you need to select the DVD
mode by pressing DVD button on the
remote control before proceeding next step.
Indicates that you need to select the VCR
mode by pressing VCR button on the
remote control before proceeding next step.
Maintenance
SERVICING
• Please refer to relevant topics on the Troubleshooting
Guide on pages 98-100 before returning the product.
• When this unit becomes inoperative, do not try to correct the problem by yourself.There are no user-serviceable parts inside.Turn off, unplug the power plug, and
please call our help line mentioned on the front page to
locate an Authorized Service Center.
CLEANING THE CABINET
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning
cloth.Wipe the disc from the center out. Do not wipe in
a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning
agents or antistatic spray intended for analogue records.
CLEANING THE DISC LENS
• If this unit still does not perform properly although you refer to
the relevant sections and to “TROUBLESHOOTING GUIDE”
in this Owner’s Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center for
inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clearer picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the
usage of rental or worn tapes can cause this problem. If
a streaky or snowy picture appears during playback, the
video heads in the unit may need to be cleaned.
1. Please visit your local electronics retailer and purchase
a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page to
locate an Authorized Service Center.
NOTES:
• Remember to read the instructions provided with the
video head cleaner before use.
• Clean video heads only when problems occur.
Before you start
Before you start
Features
This unit not only plays DVD’s, CDs and VHS tapes but also offers features for you to record to DVD discs
and edit them.The following features are offered with this unit.
DVD mode VCR mode
This unit is compatible with both DVD-RW, which is rewritable,
and DVD-R, which is available for recording once. Also, this unit
allows you to record to the video cassette tape. You can choose
either one for your convenience.
Up to 8 programs recording:
You can program the unit to record up to 8 programs, up
to a year in advance. Daily or weekly program recordings
are also available.
One-touch timer recording:
You can easily set a recording time as you prefer. Every
time the REC/OTR button on the remote control or the
RECORD button on the front panel pressed during
recording, the recording time will be increased by 30 minutes up to 8 hours.The recording automatically stops
when the recording time you set is reached.
Dubbing mode:
You can copy a DVD disc to a videotape or copy a videotape to a DVD disc.This function will be possible only if
the DVD disc and the videotape are not copy protected.
DVD mode
Setting/Clearing chapter markers:
You can easily add chapter markers anywhere in your
recordings for easy editing. (VR mode)
Making your own Playlist:
With the original remaing as it is, you can edit titles on
various playlist as you prefer.
Putting names on titles.
Setting pictures for thumbnails.
Setting/clearing chapter markers.
Deleting parts of titles, etc.
Protecting titles:
To avoid editing or erasing titles, the protect function is
useful when it is ON in the original list.
Others
Progressive Scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and a smoother appearance
without visible scan lines.
Note:
You will need to finalize the discs recorded in Video mode
to play in other DVD players.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
Editing
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
5
Others Español
VCR mode
Quick search for what you want to watch:
You can easily find the part you want to watch using the Index
search/Time search functions. An index mark will be assigned at
the beginning of each recordings you make. For Time search function, you can go to a specific point on a tape by entering the
exact amount of time you wish to skip.
* DVD-Video Format (Video mode) is a new format for recording on DVD-R/RW discs that was approved by the DVD Forum
in 2000. Adoption of this format is optional for manufactures
of DVD playback devices and there are DVD-Video players,
DVD-ROM drives or other DVD playback devices that do not
play DVD-R/RW discs recorded in the DVD-Video Format.
Recording
DVD mode
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital or DTS, you are able to experience the theater surround sound from discs which contain tracks
recorded in Dolby Digital format.
Quick search for what you want to watch:
You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time.
Start to play from Original and Playlist (VR mode):
Title playing is available from either an Original list or Playlist.
Note:
You will need to finalize the discs recorded in Video mode
to play in other DVD players.
VCR functions
Play
DVD mode
Available for playing discs recorded in Video mode
on a regular DVD player (Video mode):
Discs recorded in the Video mode can be played on regular
DVD players, including computer DVD drives compatible with
DVD-Video playback*.
Playing discs
DVD mode
REC MONITOR:
You can confirm the picture quality for recording which
you set.
If you want to change the recording speed, press REC
SPEED button to set the desired recording mode.
Automatic Chapter marker setting:
Chapter markers will be put on recordings as you set in
SETUP menu before attempting to record.
Automatic Title menu making:
The unit makes title menus automatically when finalizing
the disc which are recorded in Video mode.
Automatic PLAYLIST making (VR mode):
A Playlist will be prepared from an Original list, so that
you can edit titles in a Playlist as you prefer.
An Original list is kept as it is.
Compatibility
Getting started Changing the SETUP menu
Editing
Connections
Recording
Before you start
Table of contents
Before you start . . . . . . . . . . . . . . . . . . .2
VCR functions . . . . . . . . . . . . . . . . . . .50
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .6
Functional overview . . . . . . . . . . . . . . . . . . . . . . .7
Installing batteries in the remote control . . . . . . . . . .9
Using a remote control . . . . . . . . . . . . . . . . . . . . . . . .9
VCR/DVD recorder Switching . . . . . . . . . . . . . . . . . .9
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Recording and One-touch timer recording . . . .50
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
One-touch timer recording . . . . . . . . . . . . . . . . . . . .51
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Index search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Other operations . . . . . . . . . . . . . . . . . . . . . . . .53
Connections . . . . . . . . . . . . . . . . . . . . .10
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . .10
Connection to a cable box or satellite box . . . .11
Connection to an Audio System . . . . . . . . . . . . .12
Getting started . . . . . . . . . . . . . . . . . . .13
Functional overview . . . . . . . . . . . . . . . . . . . . . .13
SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . . .13
DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Channel settings . . . . . . . . . . . . . . . . . . . . . . . . .16
Presetting channels automatically . . . . . . . . . . . . . . .16
Adding/deleting channels . . . . . . . . . . . . . . . . . . . . . .17
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . .18
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . .18
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .19
Setting the daylight saving time . . . . . . . . . . . . . . . . .21
Selecting the TV aspect ratio . . . . . . . . . . . . . . .22
Selecting TV stereo or SAP . . . . . . . . . . . . . . . .23
RF converter output . . . . . . . . . . . . . . . . . . . . . .24
Changing the SETUP menu . . . . . . . . .25
Tour of the SETUP menu
Language settings . . . . . .
Display settings . . . . . . . .
Audio settings . . . . . . . . .
Parental control settings .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.25
.26
.28
.30
.32
Playing discs . . . . . . . . . . . . . . . . . . . . .34
Information on DVD play . . . . . . . . . . . . . . . . . .34
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Playing discs using the disc menu . . . . . . . . . . . . . . .37
Playing discs using the title menu . . . . . . . . . . . . . . .38
Special playback . . . . . . . . . . . . . . . . . . . . . . . . .39
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . . .39
Skipping TV commercials during play . . . . . . . . . . . . .40
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .41
Slow forward / Slow reverse play . . . . . . . . . . . . . . .41
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . . .43
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Repeat/Random/Program play . . . . . . . . . . . . . .45
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Selecting audio and video formats . . . . . . . . . . .47
Switching audio soundtrack . . . . . . . . . . . . . . . . . . . .47
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .49
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .49
Recording . . . . . . . . . . . . . . . . . . . . . . .54
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .54
Information on DVD recording . . . . . . . . . . . . . .56
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Restrictions on recording . . . . . . . . . . . . . . . . . . . . .56
Information on copy control . . . . . . . . . . . . . . . . . . .57
Making discs playable in other DVD player (Finalize) 57
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .58
Choosing the recording format of a blank disc . . . . .58
Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . . .60
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .61
Checking the recording picture quality . . . . . . . . . . .62
One-touch timer recording . . . . . . . . . . . . . . . .63
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .64
Hints for timer recording . . . . . . . . . . . . . . . . . . . . .66
Settings for an external source . . . . . . . . . . . . . .67
Connection to an external source . . . . . . . . . . . . . .67
Recording from an external source . . . . . . . . . . . . . .68
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .71
Setting a disc to protect . . . . . . . . . . . . . . . . . . .72
Editing . . . . . . . . . . . . . . . . . . . . . . . . .73
Information on disc editing . . . . . . . . . . . . . . . . .73
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .73
Editing discs in Video mode . . . . . . . . . . . . . . . . . . . .73
Editing discs in VR mode . . . . . . . . . . . . . . . . . . . . . .74
Editing DVD-RW discs in Video mode . . . . . . . .75
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Putting names on titles . . . . . . . . . . . . . . . . . . . . . . .76
Setting or clearing chapter markers . . . . . . . . . . . . .77
Editing DVD-RW discs in VR mode (Original) . .78
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .79
Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Setting or clearing chapter markers . . . . . . . . . . . . .82
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .83
Title Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Releasing titles from protection . . . . . . . . . . . . . . . .86
Editing DVD-RW discs in VR mode (Playlist) . . .87
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .88
Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Setting or clearing chapter markers . . . . . . . . . . . . .91
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .92
Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . . .94
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .96
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Others . . . . . . . . . . . . . . . . . . . . . . . . .98
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .98
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Language code . . . . . . . . . . . . . . . . . . . . . . . . .103
Español . . . . . . . . . . . . . . . . . . . . . . . .104
6
Before you start
Before you start
Functional overview
Front Panel
1
2
3
4
5
OPEN/CLOSE
POWER
REW
F.FWD STOP/EJECT
ONE TOUCH
DUBBING
PLAY
VCR RECORD
STOP
PLAY
DVD RECORD
OUTPUT SELECT
CHANNEL
VCR
S-VIDEO
VIDEO
L - AUDIO - R
DVD
22 20 18
21 19 17
11
15 14 13 12 10 9 8 7
16
1.
6
2 3
4 5
6
VCR functions
1
Rear Panel
DIGITAL
AUDIO
AUDIO OUT OUT
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
CB
L
COAXIAL
IN
R
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
VIDEO IN VIDEO OUT
OUT
CR
• These jacks are
OUT
1.
2.
3.
5.
7.
useful only in
DVD mode.
8.
VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
9. VIDEO IN jack (LINE1) (DVD/VCR)
Use to connect external equipment with a standard
video cable.
10. S-VIDEO OUT jack (DVD only)
Use to connect the S-Video input of a TV monitor, AV
receiver or other equipment with an S-Video cable
(not supplied).
11. AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
12. COAXIAL DIGITAL AUDIO OUT jack (DVD
only)
Use to connect an AV receiver, Dolby Digital decoder,
DTS decoder or other equipment with a coaxial digital
input jack with a digital coaxial cable (not supplied).
Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
7
Others Español
6.
7
Editing
4.
AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
S-VIDEO IN jack (LINE1) (DVD only)
Use to connect the S-Video output of external equipment with an S-Video cable (not supplied).
COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with component video cables (not supplied).
AUDIO IN jacks (LINE1) (DVD/VCR)
Use to connect external equipment with standard
audio cables.
AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the ANTENNA IN to your TV monitor.
9 8
Recording
12 11 10
Playing discs
12. DVD SELECT indicator
This indicator lights up when the DVD output mode is selected.
13. VCR SELECT indicator
This indicator lights up when the VCR output mode is selected.
14. ONE TOUCH DUBBING button (DVD/VCR)
Press to start VCR to DVD or DVD to VCR duplication you set in the SETUP menu.
15. CHANNEL L / K button (DVD/VCR)
Press to change the channel up and down.
16. Display (DVD/VCR)
Refer to “Front Panel Display Guide” on page 15.
17. Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
18. VCR RECORD button (VCR)
Press once to start a recording. Press repeatedly to
set the time for One-Touch Recording.
19. PLAY button (VCR)
Press to start playback.
20. STOP/EJECT button (VCR)
EJECTbutton-Press to remove the tape from the unit.
STOP button-Press to stop the tape playback.
Press to cancel the proceeding timer recording in VCR.
21. F.FWD button (VCR)
Press to rapidly advance the tape, or view the picture
rapidly in forward during playback. (Forward Search)
22. REW button (VCR)
Press to rewind the tape, or to view the picture rapidly
in reverse during playback mode. (Rewind Search)
Getting started Changing the SETUP menu
POWER button / indicator (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode. Press to cancel the timer
standby mode and turn the unit on.
The light besides the POWER button lights up when power is on.
2. Cassette compartment (VCR)
Insert a tape here.
3. A OPEN/CLOSE button (DVD)
Press to open or close the disc tray.
4. OUTPUT SELECT button (DVD/VCR)
Press to select the component you wish to operate.
5. Disc tray (DVD)
Place a disc on the disc tray when it’s open.
6. AUDIO input jacks (LINE2) (DVD/VCR)
Use to connect external equipment with standard audio cables.
7. VIDEO input jack (LINE2) (DVD/VCR)
Use to connect external equipment with a standard video cable.
8. S-VIDEO input jack (LINE2) (DVD only)
Use to connect the S-Video output of external equipment with an S-Video cable (not supplied).
9. DVD RECORD button (DVD)
Press once to start recording.
Press repeatedly to set the time for One-Touch Recording.
10. PLAY button (DVD)
Press to start or resume play.
11. STOP button (DVD)
Press to stop playback or recording.
Press to cancel the proceeding timer recording in DVD.
Connections
DVD -RW/-R
Before you start
Functional overview (cont’d)
Remote Control
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
OPEN/CLOSE
1
2
15
4
5
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
4
14
VCR
DVD
18
19
PAUSE
3
21
PLAY
5
23
STOP
REC/OTR
6
7
8
SETUP
TIMER PROG.
MENU/LIST TOP MENU
10
12
9
11
CLEAR/C.RESET ZOOM
SEARCH
MODE
13
25
ENTER
REC MONITOR
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
16
17
27
28
29
20
22
24
26
30
31
1. POWER button (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have
been set, press to set the unit
in timer-standby mode. Press
to cancel the timer standby
mode, then turn the unit on.
2. Number buttons (DVD/VCR)
Press to select channel numbers.
Press to select a title/chapter/track on display or a TV
channel.
Also press to enter values for
the settings in the SETUP menu.
3. DISPLAY button (DVD/VCR)
Press to display or change the
on-screen display.
4. VCR button
Press to allow the remote
control to operate the VCR.
Refer to page 9.
Press to select the VCR output mode.
5. E button (DVD/VCR)
• DVD mode
During playback, press to play
fast reverse or during pause,
press to play slow reverse.
• VCR mode
Press to rewind the tape or
to view the picture rapidly in
reverse during playback
mode.
6. REC/OTR button (DVD/VCR)
Press once to start a recording. Press repeatedly to set
the time for One-Touch
Recording.
8
7. SETUP button (DVD/VCR)
Press to display the setup menu.
During DVD playback, press and
hold for more than 3 seconds
to switch to the progressive
video output or the interlaced.
8. REC MONITOR button (DVD)
Press to check the recording
speed before attempting a
recording.
9. MENU/LIST button (DVD)
Press to display the Disc menu.
To change ORIGINAL and
PLAYLIST on the TV screen.
(VR mode only)
10. TOP MENU button (DVD)
Press to display the top menu.
11. CLEAR/C.RESET button
(DVD/VCR)
• DVD mode
Press to clear the password once
entered, to cancel the programming for CD, to clear the selected marker number in the marker
setup mode or to clear the program once entered in the timer
recording setting mode,etc.
• VCR mode
Press to reset the tape counter.
12. SEARCH MODE button (VCR)
To call up the index or time
search menu.
13. CM SKIP button (DVD)
During playback, press to
advance 30 seconds.
14. REC SPEED button
(DVD/VCR)
Press to select the recording
speed.
15. OPEN/CLOSE A button (DVD)
Press to open or close the
disc tray.
16. AUDIO button (VCR)
During playback of a HiFi
video tape, press to change
the AUDIO OUT setting to
“HIFI” or “MONO”.
17. CH K / L buttons (DVD/VCR)
• DVD mode
Press to change the channel
up and down.
• VCR mode
Press to change the channel
up and down.
Press to adjust tape tracking
during playback or in slow
motion. In still mode, you can
adjust the picture if blurred
vertically.
18. VIDEO/TV button (DVD/VCR)
Press to select VIDEO or TV
mode.
19. SLOW button (VCR)
During playback, press to
view the video tape in slow
motion.
20. PAUSE F button
(DVD/VCR)
Press to pause play or recording.
21. DVD button
Press to allow the remote
control to operate the DVD.
Refer to page 9.
Press to select the DVD output mode.
22. PLAY B button
(DVD/VCR)
Press to start or resume play.
23. D button (DVD/VCR)
• DVD mode
During playback, press to play
fast forward.
Or when playback is paused,
press to play slow forward.
• VCR mode
Press to rapidly advance the
tape or view the picture rapidly in forward during playback.
24. STOP C button
(DVD/VCR)
Press to stop playback or
recording.
25. TIMER PROG. button
(DVD/VCR)
Press to display the timer
program setting menu.
26. ENTER button
(DVD/VCR)
Press to confirm or select
menu items.
27. K / L / { / B buttons
(DVD/VCR)
Press to select items or settings.
28. RETURN
button
(DVD/VCR)
Press to return to the previously displayed menu screen.
29. ZOOM button (DVD)
During playback, press to
enlarge the picture on the
screen.
30. SKIP H button (DVD)
During playback, press to skip to
the previous chapter or track.
Or during playback, press to play
reverse step by step.
SKIP G button (DVD)
During playback, press to skip to
the next chapter or track.
Or during playback, press to play
forward step by step.
31. ONE TOUCH DUBBING
button (DVD/VCR)
Press to start VCR to DVD or
DVD to VCR duplication however you set in the SETUP menu.
Before you start
Install two AA batteries (supplied) matching the
polarity indicated inside battery compartment of the
remote control.
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the
unit.
• Use within the operating range and angle as
shown.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the unit.
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
1
2
3
Within about
23feet (7m)
POWER
REW
F.FWD
STOP/E
JECT
PLAY
VCR
RECOR
D
OPEN/C
LOSE
ONE
TOUCH
DUBBIN
CHANN
EL
G
STOP
VCR
OUTPU
T SELEC
PLAY
T
DVD
DVD
RECOR
D
DVD
-RW/-R
S-VIDE
O
VIDEO
L-
AUDIO
-R
60˚
Playing discs
Remote
control
REC
PAUS
k
E
h
REV
PLA
B Y
IP
P
SK
H
P
U/
MEN AL
GIN
STOC
G
TOP
ORI
g
K
PLA
R
NU
LIS
ME Y
ENTE
D
FW
T
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together,
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery compartment.
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or disassemble batteries.
VCR functions
VCR/DVD recorder Switching
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with the OUTPUT SELECT button.
OUTPUT SELECT button
VCR MODE
OPEN/CLOSE
POWER
REW
F.FWD STOP/EJECT
ONE TOUCH
DUBBING
PLAY
VCR RECORD
STOP
VCR
PLAY
DVD RECORD
OUTPUT SELECT
CHANNEL
S-VIDEO
VIDEO
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
OPEN/CLOSE
L - AUDIO - R
Recording
Press the VCR button on the remote control.
(Verify that the VCR SELECT indicator is lit.)
Getting started Changing the SETUP menu
Using a remote control
Connections
Installing batteries in the remote control
Before you start
Functional overview (cont’d)
DVD
DVD -RW/-R
GHI
DVD MODE
VCR button
DVD button
Press the DVD button on the remote control.
(Verify that the DVD SELECT indicator is lit.)
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
REC/OTR
SETUP
DVD
PAUSE
PLAY
OUTPUT SELECT
STOP
VCR
DVD
VCR SELECT
indicator
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
SKIP
Editing
DVD SELECT
indicator
SKIP
ONE TOUCH
DUBBING
Note
9
Others Español
• Pressing only the OUTPUT SELECT button on the front
panel DOES NOT switch the mode of the remote control.
You MUST select the correct mode on the remote control.
• Pressing the SETUP or the TIMER PROG. button
switches the unit to the DVD mode.
Connections
Connection to a TV
Antenna
Antenna
(Back of TV)
Cable
Signal
(Back of TV)
Cable
Signal
3
or
or
Connect
RF Cable
(supplied)
1
Disconnect
DIGITAL
AUDIO
AUDIO OUT OUT
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
CB
L
COAXIAL
IN
R
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
VIDEO IN VIDEO OUT
2
OUT
CR
Connect
OUT
(Back of this unit)
4 Plug in the AC power cord of this unit.
Make one of the following connections, depending on the capabilities of your existing equipment.
Audio Connection
Method 1
Method 2
Good picture
Better picture
Method 3
Best picture
TV
AUDIO IN
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO IN
Y
CB
CR
Video
cable
(supplied)
Audio cable
(supplied)
S-Video
cable
(not supplied)
Component
Video cables
(not supplied)
This unit
DVD
DVD/VCR
AUDIO OUT
T
DVD
AUDIO
S-VIDEO
COMPONENT
VIDEO OUT
OUT
Y
CB
L
L
IN
R
R
COMPONENT
VIDEO OUT
DVD
S-VIDEO
Y
L
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
CB
R
R
VIDEO IN VIDEO OUT
DVD/VCR
OUT
VIDEO OUT
CR
OUT
CR
OUT
or
DVD
AUDIO
OUT
DIGITAL
AUDIO
AUDIO OUT OUT
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
CB
L
COAXIAL
IN
R
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
L
R
VIDEO IN VIDEO OUT
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
*Required for progressive
scan display from DVD.
OUT
CR
OUT
R
• These jacks are useful
only in DVD mode.
AUDIO OUT
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
• Method 2 and method 3 are only useful in DVD mode.
PLAY
If your TV is compatible with 480p progressive scanning and you want to
enjoy that high quality picture;
You must select the connection Method 3 above and select progressive scanning mode.
To set the mode, press and hold the SETUP button on the remote control for more than
3 seconds during DVD playback, so that “P.SCAN” will appear on the display of this unit.
If your TV is not compatible with progressive scanning;
Press and hold the SETUP button on the remote control for more than 3 seconds during DVD playback, so that “P.SCAN” on the display of this unit will disappear.
10
STOP
REC/OTR
SETUP
REC MONITOR
MENU/LIST TOP MENU
TIMER PROG.
ENTER
RETURN
more than 3 seconds
during DVD playback
[Interlace mode]
[Progressive scanning mode]
Connections
Before you start
Connection to a cable box or satellite box
Connection A
(Back of this unit)
(Cable box or
Satellite box)
OUT
ANTENNA
IN
OUT
RF Cable
Cable
Signal
Connections
IN
DVD/VCR
E
(supplied)
(Back of TV)
Connection B
(Back of this unit)
ANTENNA
IN
Cable
Signal
Playing discs
DVD/VCR
(Cable box or
Satellite box)
E
OUT
IN
Getting started Changing the SETUP menu
Select this connection when you want to view or record a scrambled channel.With this connection, channels
cannot be changed on this unit.You can view or record ONLY the channels you have selected on the cable
box or the satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels on the cable box or satellite box
1) Turn on this unit by pressing POWER button.The “POWER” indicator on the front panel will light up.
Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of
the cable box or satellite box).
• If noise appears on the TV screen, press VIDEO/TV button on the remote control.
• If you use channel 4, you need to change this unit’s RF output to channel 4. Refer to “RF converter output” on page 24.
2) On the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3) On the cable box or satellite box, select the channel you want to view or record.
OUT
Editing
Others Español
11
Recording
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
VCR functions
(Back of TV)
RF Cable (supplied)
RF Cable
Select this connection when you want to change channels on this unit.With this connection, you may watch
one channel while recording another.
• You may not view or record a scrambled channel.
To select channels on the cable box or satellite box
1) On the cable box or satellite box, select channel 3 or 4 (the same channel as this unit’s RF output channel.)
• Refer to “RF converter output” on page 24.
2) On the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.
3) Turn on this unit by pressing POWER button. The “POWER” indicator on the front panel will light up.
Then select the channel you want to view or record.
• If noise appears on the TV screen, press VIDEO/TV button on the remote control.
To playback a DVD disc or a tape
Before trying to playback DVD or tape you MUST follow step 1) to 2) above.
• Refer to “Playback” on pages 35-36, 50.
To view one channel while recording another
1) While you are recording on this unit, press VIDEO/TV button.
2) On the cable box or satellite box, select the channel you want to view.
Connections
Connection to an Audio System
• Before changing the connections, all devices should be turned off.
• Refer to each owner’s manual for further information on other devices.
Method 1
(VCR/DVD Sound)
Stereo system
Method 2
(DVD Sound Only)
Receiver with Dolby
Digital Decoder
Analog audio
input jacks
AUDIO
COAXIAL
Digital audio
input jack
Coaxial Digital
Audio cable
(not supplied)
Audio cable
(supplied)
This unit
DVD/VCR
AUDIO OUT
AUDIO OUT
L
R
DVD
DIGITAL
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL
or
DVD
AUDIO
OUT
L
R
(DVD Audio only)
12
Note
• If you connect this unit to a receiver with a Dolby
Digital decoder and set “Dolby Digital” to “Stream”
for the “Digital Out” setting in the SETUP menu.
(Refer to pages 30-31.)
• If output is DTS encoded audio, connect to a DTS
decoder and set “DTS” to “ON” for the “Digital
Out” setting in the SETUP menu. (Refer to pages
30-31.)
• A Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT
deck.
• Unless connected to a receiver with a Dolby Digital
decoder or a DTS decoder, set “Dolby Digital” to
“PCM” and “DTS” to “OFF” for the “Digital Out”
setting in the SETUP menu. Playing a DVD using
incorrect settings may generate noise distortion and
may also damage the speakers. (Refer to pages 3031.)
• Set “Dolby Digital” to “PCM” for the “Digital Out”
setting in the SETUP menu for connecting to an
MD deck or DAT deck. (Refer to pages 30-31.)
• By hooking this unit up to a receiver with a Multichannel Dolby Digital decoder, you can enjoy highquality Dolby Digital 5.1 channel surround sound as
heard in movie theaters.
Getting started
Guide to On Screen Menus
The unit uses the following types of on screen menus for most operations. SETUP/DISC/CD menu,Title list,
and DISPLAY menu, which allows you to change the playing status of disc during play.The DISPLAY menu
also gives you some disc information for checking the status of the disc.
Connections
SETUP/DISC/CD menu
Press SETUP button to display the setup main menu, then choose either SETUP/DISC/CD by pressing { / B
buttons.Then, press ENTER button to display each menu.
These menus provide entry to all main functions of the unit.
“DISC” is available only when a DVD-R/RW
disc is inserted into the unit.
When a DVD-Video disc (commercially
available), a new DVD-R disc or the finalized
DVD-R disc is inserted into the unit, you
cannot select “DISC”.
Setup Menu
2
3
Disc
CD Playback Mode
Edit
Random Play
Format
Program Play
Finalize
5
6
ON
1 2 3 4
1 2
Playback Setting
1. Random Play:
To activate the random CD tracks
playback.
2. Program Play(Audio CD
only):
To activate the programmed CD
tracks playback feature.
Editing
You will need to finalize
the discs recorded in video
mode to play in other DVD
players.
13
Others Español
1. Edit:
Turns on a title list, (When a disc
with VR mode is inserted,
'Original' or 'PlayList' is available.),
which shows the recorded titles
on the disc.
2. Format:
Allows you to erase all of the
recorded content on the disc.
The disc will be completely blank.
3. Finalize:
Allows you to finalize a disc containing recorded titles.
4. Disc Protect (VR mode
only) :
Allows you to protect a disc from
accidental editing or recording.
Recording
1. Playback:
To set up the DVD/VCR to your
preference.
2. Recording:
To set up the DVD/VCR to
record to discs or tapes.
3. Display:
To set up the OSD screen of the
DVD/VCR.
4. Select Video: (L1 or L2)
To choose a line input from external video products.
5. Clock:
To set up the clock of the unit as
you need.
6. Channel:
To preset the TV channels.
VCR functions
Disc Protect OFF
4
Playing discs
1
CD Playback Mode
Disc Setting
Setup
“CD” can only be selected
when an Audio CD disc or a
CD-R/RW disc with MP3 files
is inserted into the unit.
Getting started Changing the SETUP menu
“SETUP” is available only in
the Stop mode.
Before you start
Functional overview
Getting started
Functional overview (cont’d)
DISPLAY menu
1. Indicates the disc type and
the format mode.
DVD mode
First:
DVD
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
Details are on page 34.
4
1
1
1
00:00:00
DVD-RW
Video mode
SP 1:25 Rem.
5
CH 1
2
3
Note:
In some descriptions on this
manual, only one disc type is
indicated as an example.
2. Indicates the recording mode
and possible recording time
left.
3. Indicates the current channel
number.
4. Indicates title number, chapter
number and the time elapsed
of disc play.
5. Icon Description:
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
VCR mode
First:
VCR
Press DISPLAY button to call up
the display menu.
1
2
CH21
14
SP
0:00:00
HIFI
3
4
5
1. Playback status of the current
tape.
2. Indicates the current channel
number and an audio status of
the program.
3. Indicates the recording speed.
4. Indicates the Tape Counter.
5. Audio status of the current
tape.
Getting started
Before you start
Functional overview (cont’d)
Front Panel Display Guide
4
2
Connections
1
3
7
6
3. Recording speed
Indicates the recording speed of
the disc or the tape.
4. Title/Track and Chapter
mark
: Appears when indicating
a title/track number.
: Appears when indicating
a chapter number.
5. Displays the following
• Playing time / remaining time
• Current title / chapter / track
number
• Recording time
• Clock
• Channel number
• VCR tape counter
• OTR remaining time
7.
: Appears when the current time is in the ‘pm’
portion of the day.
Recording
:
Appears when the progressive scan video output is activated.
VCR functions
6.
Playing discs
2. Disc type and Current
status of the unit
: Appears when an audio CD
or a disc with MP3 files is
inserted in the DVD/VCR.
: Appears when a DVD disc
is inserted in the DVD/VCR.
Appears when a DVD
timer recording is proceeding.
Appears when DVD is in
the timer recording standby mode.
:
Appears when a DVD-R disc
is inserted in the DVD/VCR.
:
Appears when a DVDRW disc is inserted in
the DVD/VCR.
: Appears when a VCR
timer recording is proceeding.
Appears when VCR is in
the timer recording standby mode.
:
Appears during VCR to DVD
duplication process.
:
Appears during DVD to VCR
duplication process.
Getting started Changing the SETUP menu
5
1. Current status of the unit
: Appears when disc/tape
play is paused.
: Appears when playing a
disc/tape.
: Appears when timer programming has been set.
: Appears during recording
process.
:
Appears when repeat
playback is turned on.
: Appears when a tape is in
the unit.
Display message
2
4
1. Appears when the disc tray is
opening.
2. Appears when the disc tray is
closing or closed.
3. Appears when a disc is loading
inside the DVD/VCR.
4. Appears when data is recording onto the disc.
15
Others Español
3
Editing
1
Getting started
Channel settings
It is recommend that you preset
available channels in your area
using “Auto Preset” in the Channel
Preset of the SETUP menu.
Presetting channels
automatically
4
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
1
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
Setup
1
DISPLAY
Press POWER button to turn
on the unit.
DVD
VCR
PLAY
2
3
7
Playback Setting
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
Turn the TV on and be sure
to select the input to which
the DVD/VCR is connected.
CLEAR/C.RESET ZOOM
SEARCH
MODE
5
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
VCR
DVD
Auto Preset
Manual Preset
TV Audio Select
Stereo
3
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
PAUSE
6
Select “Auto Preset” using K
/ L buttons, then press
ENTER button.
The unit will begin scanning channels available in your area.
CH 18
CM SKIP
SKIP
SKIP
ONE TOUCH
DUBBING
4
5
6
To select a channel
You can select a channel by
directly entering channel using
the Number buttons on the
remote control.
Notes for using the
Number buttons:
• When selecting cable channels
which are higher than 99,
enter channel numbers as a
three-digit number.(For example: 117, press 1, 1, 7)
• You must precede single-digit
channel numbers with a zero
(For example: 02, 03, 04 and
so on).
• You can select the line input
mode (“L1” or “L2”).To select
“L1” by pressing [0],[0],[1].To
select “L2” by pressing
[0],[0],[2].Details are on page 68.
Auto Presetting Now
Setup Menu
Note
This may take a few minutes to
complete.
7
Press SETUP button to exit.
•You can select only the channels
memorized in this unit by using
the CHANNEL buttons.
16
• If the auto presetting is cancelled during presetting, some
channels not yet preset may
not be received.
• The selection will depend on
how you receive the TV channels.
To cancel the auto presetting during scanning:
Press RETURN button or
SETUP button to cancel.
Getting started
Before you start
Channel settings (cont’d)
Adding/deleting channels
4
Select “Manual Preset” using
K / L buttons, then press
ENTER button.
Manual Preset menu will appear.
1
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
DISPLAY
SLOW
DVD
VCR
PAUSE
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
5
CLEAR/C.RESET ZOOM
Select the channel number to
add or delete.
Press { button to move to a
lower channel number.
Press B button to move to a
higher channel number.
CM SKIP
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
5
6
Playing discs
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
SEARCH
MODE
RETURN
Getting started Changing the SETUP menu
CH2
Add
Delete
MENU/LIST TOP MENU
2
CH
VIDEO/TV
0
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Setup Menu
OPEN/CLOSE
DEF
PQRS
7
Setup > Channel Preset > Manual Preset
AUDIO
Connections
The channels you no longer
receive or seldom watch can be
deleted from the memory.You also
may add channels into memory.
Setup > Channel Preset > Manual Preset
CH18
Add
Delete
Setup
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
VCR
DVD
Manual Preset
Stereo
Editing
Auto Preset
TV Audio Select
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
The channel number will be
added or deleted from the channel memory.Then next channel
number will appear so that you
can continue adding or deleting
channels.
Recording
3
Setup > Channel Preset
VCR functions
6
Playback Setting
7
Press SETUP button to exit.
Others Español
17
Getting started
Setting the clock
Set the clock before you try timer
recording. If a Public Broadcasting
Station (PBS) is available in your area,
follow Auto Clock Setting below. If
not, follow Manual Clock Setting on
pages 19-20.
Auto Clock Setting
4
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Make sure
• The antenna/cable TV connections are correct.
• If this unit is connected to a
Cable Box or Satellite Box, select
the local PBS station on the box
to set the clock automatically.
Setup > Clock
7
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
CH
VIDEO/TV
SPACE
Clock Setting
Auto Clock Setting
Daylight Saving Time
SLOW
0
OFF
Auto
Auto
Manual
Off
DISPLAY
DVD
VCR
PAUSE
PLAY
1
6
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
OPEN/CLOSE
DEF
PQRS
7
VCR DVD
AUDIO
5
CLEAR/C.RESET ZOOM
• If you do not know your
PBS channel number, select
“Auto” using K / L buttons,
then press ENTER button
and proceed to setp 6.
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
5
• If you know your PBS channel number, select “Manual”
using K / L buttons, then
press ENTER button.
Setup Menu
2
Setup > Clock
Clock Setting
Select “SETUP” using { / B buttons, then press ENTER button.
SETUP menu will appear.
Auto Clock Setting
Daylight Saving Time
VCR DVD
OFF
Set Channel
No.
Auto
Auto
CH1
Manual
Off
Setup
Enter your PBS channel
number using Number or K
/ L buttons, then press
ENTER button.
Playback Setting
6
3
Select “Clock” using K / L / { / B
buttons, then press ENTER button.
Clock menu will appear.
Setup > Clock
VCR DVD
Clock Setting
18
Auto Clock Setting
Auto
Daylight Saving Time
ON
Press SETUP button to exit.
7
Press POWER button to turn
off the unit.
This unit will search for the time
only when the power is off. Leave
it off for several minutes to give
this unit time to set the clock on
the display of the front panel.
Note : Clock Set
• The clock may set itself automatically after you connect the
antenna/cable signal to this
unit and plug in the power
cord. In this case, the current
time will appear on the display
on the front panel.
• If the current time is not displayed or the displayed time is
not correct, set the clock
manually. (See Next Page.)
Getting started
Before you start
Setting the clock (cont’d)
Manual Clock Setting
4
1
Select “Clock Setting” using
K / L buttons, then press
ENTER button.
A clock setting window will
appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Setup > Clock
OPEN/CLOSE
Connections
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
CH
VIDEO/TV
SLOW
0
VCR DVD
DISPLAY
DVD
VCR
PAUSE
Clock Setting
Auto
Daylight Saving Time
ON
---/--/----(---)
--:--
PLAY
1
STOP
REC/OTR
SETUP
Setup Menu
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Press ENTER button again.
Default date will appear.
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
SEARCH
MODE
CM SKIP
SKIP
SKIP
ONE TOUCH
DUBBING
5
Enter the date (month / day /
year) using K / L buttons.
Press { / B buttons to move
the cursor.
Setup > Clock
2
3
4
5
6
Playing discs
Setup
CLEAR/C.RESET ZOOM
RETURN
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
12 : 00AM
Playback Setting
VCR functions
3
VCR DVD
6
Enter the time (hour /
minute) using K / L buttons.
Press { / B buttons to move
the cursor.
Recording
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
Getting started Changing the SETUP menu
Auto Clock Setting
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
Setup > Clock
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
Note : In Time of Power
Loss
Instructions continue on page 20.
19
Others Español
• Your clock setting will be lost
if either there is a power failure or this unit has been
unplugged for more than 30
seconds when you set the
clock manually.
Editing
JAN / 12 / 2004 (MON)
09 : 24 AM
Getting started
Setting the clock (cont’d)
7
8
Press K / L buttons to select
AM or PM, then press ENTER
button.
Clock menu will appear, then the
settings will be activated.
Press SETUP button to exit.
Although seconds are not displayed,
they begin counting from zero.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Setup > Clock
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
VCR DVD
DVD
VCR
DISPLAY
PAUSE
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
PLAY
8
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
7
SKIP
ONE TOUCH
DUBBING
CM SKIP
When “Auto Clock Setting” is selected to “Auto” or
“Manual”, change it to “OFF” as follows:
Repeat steps (1) to (3) in “Manual Clock Setting”.
PLAY
6
4
5
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Select “OFF” using K / L
buttons, then press ENTER
button.
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
20
VCR DVD
OFF
Auto
Auto
Manual
Off
6
Press SETUP button to exit.
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
4
5
Getting started
Before you start
Setting the clock (cont’d)
Setting the daylight saving time
Select “Daylight Saving
Time” using K / L buttons,
then press ENTER button.
Daylight Saving Time options will
appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Setup > Clock
CH
VIDEO/TV
SLOW
0
VCR DVD
DISPLAY
1
OPEN/CLOSE
Connections
When Daylight Saving Time is
ON, the unit clock will automatically move forward one hour on
the first Sunday in April and move
back one hour on the last Sunday
in October.
4
DVD
VCR
PAUSE
Clock Setting
Daylight Saving Time
Auto
ON
OFF
PLAY
1
6
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
5
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
Choose “ON” when currently
observing the daylight saving time.
Setup Menu
6
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Press SETUP button to exit.
CM SKIP
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
5
Playing discs
2
SEARCH
MODE
RETURN
Getting started Changing the SETUP menu
Auto Clock Setting
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
VCR functions
Setup
Playback Setting
Recording
3
Setup > Clock
Editing
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
Others Español
21
Getting started
Selecting the TV aspect ratio
You can select the TV aspect ratio
to match the formats of what you
are playing with the unit and your
TV screen (4:3 standard or 16:9
widescreen TV).
“4:3 Letter Box” has been selected as the default.
4
Select “TV Aspect” using K /
L buttons, then press ENTER
button.
Option window will appear.
Setup > Playback
1
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
AUDIO
CH
VIDEO/TV
SPACE
TV Aspect
Parental Lock
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Disc Menu Language
Audio Language
Subtitle Language
16:9 Box
Wide
4:3 Letter
8 & Scan
4:3 Pan
16:9English
Wide
Dynamic Range Control
Fast Forward with Audio
DISPLAY
Original
OFF
Digital Out
ON
OFF
Refer to the Note on this
page.
SLOW
0
DVD
VCR
PAUSE
PLAY
1
6
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
5
Select a desired option using
K / L buttons, then press
ENTER button.
Setup Menu
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
2
3
4
5
6
Press SETUP button to exit.
Setup
Playback Setting
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Playback menu will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
22
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Note :TV Aspect
If you have a standard TV:
Select “4:3 Letter Box”, so that
black bars appear on the top
and bottom of the screen.
Select “4:3 Pan & Scan” for a
full height picture with both
sides trimmed.
If you have a widescreen TV:
Select “16:9 Wide”.
Getting started
Before you start
Selecting TV stereo or SAP
You can select stereo or SAP.
“Stereo” has been selected as the
default.
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
VCR
DVD
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
Auto Preset
Stereo
SLOW
DVD
VCR
PAUSE
PLAY
1
6
Select “TV Audio Select”
using K / L buttons, then
press ENTER button.
Option window will appear.
STOP
REC/OTR
Setup > Channel Preset
VCR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
DVD
Auto Preset
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Manual Preset
TV Audio Select
2
3
4
5
Stereo
Stereo
SAP
Playing discs
5
Select “Stereo” or “SAP”
using K / L buttons, then
press ENTER button.
Stereo:
Outputs main-audio.
SAP:
(Secondary Audio Program)
Outputs second audio channel.
Refer to the item in “Glossary” on
page 102 for more information.
VCR functions
Playback Setting
VIDEO/TV
Getting started Changing the SETUP menu
DISPLAY
4
Setup
CH
0
TV Audio Select
2
OPEN/CLOSE
DEF
SPACE
Manual Preset
Setup Menu
AUDIO
Connections
1
3
Recording
6
Press SETUP button to exit.
Notes on TV channel audio
SAP
Disc/tape
recording
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
Audio
output
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
23
Others Español
• As can be seen in the table on the right, if your TV
channel audio is set to SAP and the recorded TV program has Stereo and Secondary Audio Programs, you
can only view the program in the sub-audio.
Broadcast
audio
STEREO+SAP
STEREO
MONO+SAP
MONO
STEREO+SAP
STEREO
MONO+SAP
MONO
Editing
• When you record a TV program which has Stereo and Selected
audio
Secondary Audio Programs on a DVD-RW/R or a
tape, you have to select the TV channel audio (Stereo Stereo
or SAP) beforehand. Only the selected channel audio
will be recorded. Refer to the following table to check
an appropriate setting.
Getting started
RF converter output
Change from CH3 to CH4
You can watch TV programs through the tuner of the unit. (Usually
channel 3 or 4 of the TV is available for the RF converter setting.) Be
sure to connect the unit to a TV using the RF cable. Refer to page 10.
1
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
7
Select channel 3 on your TV.
• Be sure that the unit is in DVD mode.
OPEN/CLOSE
DEF
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
2
DVD
VCR
PAUSE
PLAY
Press VIDEO/TV button on the remote control.
• If noise appears, change the RF output channel of the DVD/VCR to
CH 4 by pressing VIDEO/TV button for 3 seconds.The RF output
channel will alternate between CH3 and CH4 as follows.
STOP
REC/OTR
SETUP
Press VIDEO/TV button
for more than 3 seconds
3 seconds
(RF on) CH4
3 seconds
(RF on) CH3
3 seconds
(RF on) CH4
3 seconds
Note:
•RF channel change is available only when the unit is in DVD mode.
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
24
AUDIO
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
1
Changing the SETUP menu
The following table shows the settings that are available in the SETUP menu and which are the default settings.
Refer to the following table for useful operation.
SETUP menu
Audio Language
Original
English
French
Set the language for audio.
Subtitle Language
OFF
English
French
Set the language for subtitle.
OSD Background
Transparency
100%
Set the background transparency of OSD
screen.
OSD Background
Color
1
2
3
OSD Language
(Change password)
Dolby Digital
PCM
Stream
PCM
Auto
48kHz
96kHz
DTS
ON
OFF
Set the language for OSD
(On Screen Display).
Set the time at which point the screen
saver turn on.
Set the type of sound signal which outputs
from the digital audio output jack.
Set whether the sound recorded in 96kHz
will be down sampled to 48kHz.
Set whether DTS signal will be output or
not.
ON
OFF
Compressing the range of sound volume.
ON
OFF
ALL
level 8 to 1
Enter the current
four-digit password
Outputting sound during playback in fast
forward.
Set the parental level of your DVD discs.
Recording
Dynamic Range
Control
Fast Forward with
Audio
Parental Lock
English
Français
Español
OFF
5 minutes
10minutes
Set the OSD screen color.
1 (Green), 2 (Blue), 3 (Red)
VCR functions
4.Parental setting
Pages 32-33
Digital Out
35%
25%
Playing discs
Screen Saver
3.Audio setting
Pages 30-31
Set the language for disc menu.
Getting started Changing the SETUP menu
2.Display setting
Pages 28-29
Disc Menu Language English
French
Spanish
Contents
Connections
1.Language setting
Pages 26-27
Items (highlight is the default)
Before you start
Tour of the SETUP menu
Set and change the password.
Editing
Note : Setup
25
Others Español
• If you change a setting in SETUP
menu, the information of contents
stays on even when the power is
switched off.
Changing the SETUP menu
Language settings
Press STOP button if you are playing a disc.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
4
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
Setup Menu
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
2
CLEAR/C.RESET ZOOM
SEARCH
MODE
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select a desired item using K / L buttons, then press
ENTER button.
Note : Languages
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available on some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it
is available.
26
Changing the SETUP menu
Before you start
Language settings (cont’d)
Disc Menu Language (Default : English)
Set the language for Disc Menu.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Setup > Playback
DVD
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
DVD
4:3 Letter Box
All
English
English
French
Original
Spanish
OFF
Other
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Setup > Playback
DVD
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Parental Lock
Disc Menu Language
DVD
4:3 Letter Box
All
Original
English
English
Digital Out
Original
French
OFF
Spanish
Other
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Audio Language
Subtitle Language
Subtitle Language
Digital Out
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Setup > Playback
Setup > Playback
DVD
TV Aspect
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Audio Language
Subtitle Language
OFF
Subtitle Language
TV Aspect
DVD
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Parental Lock
Disc Menu Language
Digital Out
VCR functions
Digital Out
4:3 Letter Box
All
OFF
English
English
Original
French
OFF
Spanish
Other
Parental Lock
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Playing discs
Subtitle Language (Default : OFF)
Set the subtitle language.
Getting started Changing the SETUP menu
Audio Language (Default : Original)
Set the Audio language.
Connections
Setup > Playback
If “Other” is selected, press 4-digit code using number buttons.
e
Code Input
Audio
---ON
• When you finish entering
the code, press ENTER
button. Refer to the language code table on page
103.
Editing
Control
Recording
age
All
English
English
French
Original
Spanish
OFF
Other
OFF
Press SETUP button to exit SETUP menu.
27
Others Español
5
Changing the SETUP menu
Display settings
Press STOP button if you are playing a disc.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
Setup Menu
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
2
CLEAR/C.RESET ZOOM
SEARCH
MODE
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Display” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
4
Select a desired item using K / L buttons, then press
ENTER button.
28
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
Changing the SETUP menu
Before you start
Display settings (cont’d)
OSD Background Transparency (Default : 35%)
Set the background transparency of OSD screen.
You can choose one among 0% through 100%.
DVD
OSD Background Transparency 35%
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
Setup > Display
DVD
OSD Background Transparency 35%100%
85%
OSD Background Color
1
70%
OSD Language
English
50%
Screen Saver
10 minutes
35%
25%
10%
0%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Setup > Display
DVD
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Transparency 35%
OSD Background Color
Screen Saver
10 minutes
Screen Saver
11
2
English
3
10 minutes
Setup > Display
VCR
OSD Language
OSD Language (Default : English)
Set the OSD language.
Setup > Display
VCR
DVD
OSD Background Transparency 35%
OSD Background Transparency 35%
OSD Background Color
1
OSD Background Color
OSD Language
English
OSD Language
Screen Saver
10 minutes
Screen Saver
DVD
1
English
English
Français
10 minutes
Español
Setup > Display
DVD
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Color
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
Screen Saver
OSD Language
1
OFF
5English
minutes
1010
minutes
minutes
15 minutes
30 minutes
Recording
OSD Background Transparency 35%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
VCR functions
Screen Saver (Default : 10 minutes)
Set the time at which point the screen saver function appears on the TV
screen.
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Playing discs
1
English
OSD Background Color
OSD Language
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Getting started Changing the SETUP menu
OSD Background Color (Default : 1 Green)
Set the OSD screen color.
You can choose among the following options 1(Green), 2(Blue), and 3(Red).
Connections
Setup > Display
5
Editing
Press SETUP button to exit SETUP menu.
Others Español
29
Changing the SETUP menu
Audio settings
Choose the appropriate Audio settings for your equipment.
It will only affect DVD discs during playback.
Press STOP button if you are playing a disc.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
Setup Menu
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
2
CLEAR/C.RESET ZOOM
SEARCH
MODE
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
DVD
4:3 Letter Box
All
English
Original
OFF
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Note : Dynamic Range
Control
• Dynamic Range Control function is available only on the
discs which are recorded in
the Dolby Digital format.
4
Select a desired item using K / L buttons, then press
ENTER button.
Digital Out
Sets the digital audio output for discs when connected through
the coaxial digital audio output.
Setup > Playback
TV Aspect
DVD
DVD
4:3 Letter Box
All
English
TV Aspect
Disc Menu Language
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Audio Language
Original
Subtitle Language
OFF
Subtitle Language
Parental Lock
Digital Out
30
Setup > Playback
Parental Lock
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
PCM
ON
Dolby
Digital
DTSOFF
• Select a setting using K / L
buttons, then press ENTER
button.
Option window will appear.
Proceed to steps A or B.
Changing the SETUP menu
A
Settings for PCM (Default : Auto)
OFF
PCM Auto
48kHz
ON
Dolby
Digital
96kHz
DTSOFF
ontrol
Audio
Settings for Dolby Digital (Default : Stream)
• Select a setting using K / L buttons, then
press ENTER button.
Your setting will be activated.
PCM : Converts Dolby Digital into PCM
(stereo).
When your amplifier/receiver is NOT compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
When your amplifier/receiver is compatible with Dolby Digital, set to “Stream”.
Original
OFF
PCM
ON
Dolby
Digital
PCM
Stream
DTSOFF
ontrol
Audio
C
Note
When playing a DVD-RW
disc recorded in VR mode
• If the audio source on a disc is
Dolby Digital format, set “Dolby
Digital” to “PCM” so that you
can switch to main (L), sub
audio (R), or a mix of both (L/R)
with your amplifier/decoder.
Settings for DTS (Default : OFF)
OFF
ontrol
Audio
PCM
ON
Dolby
Digital
DTSOFFON
OFF
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Setup > Playback
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
ON
OFF
Fast Forward with Audio (Default : OFF)
Set to ON to output sound during playback in x2 fast forward.
Setup > Playback
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
Setup > Playback
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Editing
TV Aspect
Recording
Subtitle Language
DVD
4:3 Letter Box
All
English
VCR functions
Dynamic Range Control (Default : ON)
Set to ON to compress the range between soft and loud sounds.
Playing discs
• Select a setting using K / L buttons, then press ENTER button.
Your setting will be activated.
ON
: Outputs DTS signals.
When your amplifier/decoder is compatible with DTS, set to “ON”.
OFF
: No DTS signal is output.
When your amplifier/decoder is NOT compatible with DTS, set to
“OFF”.
Original
Getting started Changing the SETUP menu
B
Note
When playing disc with copyright protection
• If you select “Auto”, the sound
will be down sampled to 48kHz.
• If you select “96kHz”, no digital
sound will be output. Select
“Auto”, to output 48kHz digital
sound.
Connections
• Select a setting using K / L buttons, then
press ENTER button.
Your setting will be activated.
Auto
: Select “Auto” usually.
48kHz : If your amplifier/receiver is NOT compatible with 96kHz PCM, select “48kHz”.
96kHz sound will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible
with 96kHz PCM, select “96kHz”. 96kHz
sound will be output.
Original
Before you start
Audio settings (cont’d)
Digital Out
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
ON
ON
OFF OFF
5
Press SETUP button to exit SETUP menu.
31
Others Español
Dynamic Range Control
Changing the SETUP menu
Parental control settings
Some DVD-Video discs feature a Parental control setting.
Playback will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will playback.
This feature prevents your children from viewing inappropriate
material.
Press STOP button if you are playing a disc.
4
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
DVD
VCR
PAUSE
PLAY
1
5
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
Setup Menu
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select “Parental Lock” using K / L buttons, then press
ENTER button.
32
Note : Parental Control
• Parental control function may
not be available on some
DVD discs.
• With some DVDs, it may be
difficult to find if they are
compatible with parental control. Be sure to check if the
parental control function
operates in the way that you
have set it.
• Record the password in case
you forget it.
Changing the SETUP menu
Before you start
Parental control settings (cont’d)
Parental Lock (Default : All)
Set the Parental control level.
Setup > Playback
TV Aspect
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
DVD
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
Getting started Changing the SETUP menu
A
4:3
All Letter Box
8
All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Change the parental level
using K / L buttons, then
press ENTER button.
Option window will appear.
Proceed to steps A or B.
Connections
Parental Lock
Setup > Playback
DVD
A password has not been set yet
Setup > Playback
DVD
TV Aspect
4:3
Letter Box
Change
AllPassword?
Yes
No
8
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
Setup > Playback
Yes
DVD
TV Aspect
Parental Lock
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3
Password
All Letter Box
8- - - All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
B
A password has been set already
Setup > Playback
TV Aspect
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Setup > Playback
DVD
TV Aspect
4:3
Letter Box
Change
AllPassword?
Yes
No
8
Parental Lock
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
• If you select “No”, proceed
to Step 5.
Yes
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
DVD
4:3
Password
All Letter Box
8- - - All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
Recording
• Enter the current password
using Number buttons.
Setup > Playback
Change the password
VCR functions
Parental Lock
DVD
4:3
All Letter Box
Password
8
All
7* * * *
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Playing discs
• If you select “No”, proceed
to Step 5.
Note : Password Reset
Press SETUP button to exit SETUP menu.
Others Español
33
Editing
5
• Press CLEAR/C.RESET button
to erase numbers entered
incorrectly.
• When you forget the password or you want to clear all
settings in Parental lock, enter
4,7,3,7 using Number buttons
in option window. Password
will be cleared and parental
levels will be set to All.
Playing discs
Information on DVD play
Before you attempt to play DVD discs, read the following information.
Playable discs
Region codes
This unit is compatible with following discs.
To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as
described below. Discs that have the following logos
will play on the unit. Other Disc types are not guaranteed to play.
This unit has been designed to play DVD discs with
Region One (1). DVDs must be labeled for ALL
regions or for Region 1 in order to play on this unit.
You cannot play DVDs that are labeled for other
regions. Look for the symbols below on your DVDs.
If these region symbols do not appear on your
DVD, you cannot play that DVD in this unit.
Disc
Logo
DVD VIDEO
DVD-RW (VIDEO/VR FORMAT)
CD-DA (AUDIO CD)
The number inside the globe refers to region of the
world. Region 1 represents the United States,
Canada, Bermuda, the U.S.Virgin Islands and small
regions near Australia.
A DVD labeled for a specific region can only play on
the unit with the same region code.
CD-R (CD-DA FORMAT, MP3 files)
DVD playback
CD-RW (CD-DA FORMAT, MP3 files)
The contents of a DVD disc are generally divided
into titles.Titles may be further subdivided into
chapters.
DVD-R (VIDEO FORMAT)
Start Rec.
Stop/Start
Stop Rec.
Color systems
DVDs are recorded in different color systems
throughout the world.The most common color systems are NTSC (which is used primarily in the
United States and Canada), PAL and SECAM.
This unit uses NTSC, so DVDs you play must be
recorded in the NTSC system.You cannot play
DVDs recorded in other color system.
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Guide to displays
First:
DVD
Press DISPLAY button to bring up
the display menu.This menu will
give you information on the playing disc. Some operations are
available while the disc is playing.
4
1
1
1
00:00:00
DVD-RW
Video mode
SP 1:25 Rem.
5
34
CH 1
2
3
1. Indicates a disc type and a
format mode.
2. Indicates a recording speed
and recording time left.
3. Indicates a current channel
number and an audio status of
the program.
4. Indicates a title number, chapter number and the time
elapsed of disc play.
5. Icon Legend:
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
Playing discs
Before you start
Basic playback
Playback
DVD-R
Video
VR
DVD-RW
DVD-RW
VR mode:
Original
1
1
2
3
1
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JAN/1 12:00AM
4
JAN/1 1:00AM
JAN/1 2:00AM
JKL
5
6
TUV
WXYZ
8
9
7
5
CH
MNO
4
PQRS
2
6
VIDEO/TV
SPACE
SLOW
0
JAN/1 3:00AM
JAN/1 4:00AM
MENU/LIST button
1
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
JAN/1 12:00AM
4
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
5
6
PAUSE
STOP
REC/OTR
SETUP
4
4
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
JAN/1 3:00AM
DVD
PLAY
Playlist
2
VCR
DISPLAY
RETURN
SKIP
5
SKIP
ONE TOUCH
DUBBING
CM SKIP
JAN/1 4:00AM
3
5
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playback will begin.
Playing discs
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
6
This operation may take a
few minutes to complete.
Press TOP MENU button to
display the title menu.
You can change “Original” or
“Playlist” of VR mode using
MENU/LIST button.
Video mode:
Note :Title List
To eject the disc, press
OPEN/CLOSE A button to open
the disc tray, then remove the disc
before turning off the DVD/VCR.
• For DVD-R (Video mode)
and DVD-RW (Video mode)
discs which are already finalized, a title list will be displayed instead of thumbnails.
Recording
4
Press STOP C button to stop
playback.
Title Menu
1 JAN/1
12:24AM
CH96
VCR functions
disc
tray
guide
Getting started Changing the SETUP menu
Press POWER button, then
press DVD button.
When you are playing a DVD, turn
the TV on and be sure to select
the input to which the DVD/VCR
is connected.
OPEN/CLOSE
Connections
1
POWER
XP
2
3
4
5
6
7
8
1
JAN/1 12:00AM
4
3
JAN/1 1:00AM
JAN/1 2:00AM
5
JAN/1 4:00AM
• You can resume play from
where you stopped playing
the disc Resume play.
Refer to page 39 for details
about resume play.
• Some discs may start playing
automatically.
35
Others Español
JAN/1 3:00AM
1
2
Editing
Title List
Playing discs
Basic playback (cont’d)
DVD-V
CD
MP3
1
Press POWER button, then
press DVD button.
When you are playing a DVD or
an audio CD, turn the TV on and
be sure to select the input to
which the DVD/VCR is connected.
2
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
4
Press PLAY B button to start
playing.
Playback will start.
1
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
If you are playing a DVD-Video
disc, a menu may appear.
Refer to page 37 for details about
a disc menu.
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
2
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
PLAY
5
Press STOP C button to stop
STOP
REC/OTR
playing.
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
3
Place the disc onto the disc
SEARCH
MODE
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
4
5
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
Note : Automatic Playback
• Some discs may start playing
automatically.
For MP3 playback
1
In stop mode, press TOP MENU
button to bring up the MP3
menu.
List of MP3 Files
DISC NAME
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
1 FILE NAME 1
2 FILE NAME 2
1/ 2
• To exit the menu, press TOP
MENU button again.
2
Press K / L buttons to select a
desired folder (group) or track,
then press ENTER button.
When selecting track:
Playback will start.
When selecting the folder:
The files in folder will appear.
Press K or L button to select the
track or folder you want, then
press ENTER button.
36
• Press s button or RETURN
button to go to the previous
hierarchy.
• Press STOP C button to return
to the first item.
Hints for MP3 files:
• Folders are known as Groups,
files are known as Tracks.
• Folders are accompanied by
icon.
• MP3 files are accompanied by icon.
Playback will start from the
selected track and go to the
next one in turn.
• The system can recognize up to 255
groups (or folders) and up to 255 tracks.
• The name of group and track can
be displayed in up to 32 characters. Unrecognizable characters
will be replaced with asterisks.
• If there are no files in the folder,
“No Files” will be displayed.
This unit recommends the files
recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 112kbps - 320kbps.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
1
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
2
2
ONE TOUCH
DUBBING
Note : MP3 Playback
• The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT deck.
• Files whose extension is other
than “.mp3 (MP3)” will not be
listed in the MP3 menu.
• Some unplayable folders or
tracks may be listed in the
MP3 menu due to the
recording status.
Playing discs
Before you start
Basic playback (cont’d)
Playing discs using the disc menu
DVD-V
2
Select an item using K / L /
{ / B buttons, then press
ENTER button to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
DVD
K / L / { / B buttons:
1
Moves the cursor around screen.
Press MENU/LIST button.
The DVD main menu will appear.
Enter button:
Selects the currently highlighted
menu option.
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
PLAY
1
2
3
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
2
SKIP
ONE TOUCH
DUBBING
Number buttons:
Selects a numbered menu option
(some discs only). Press ENTER
button after.
Playing discs
If the feature is not available on
the DVD disc,
may appear on
the TV screen.
REC SPEED
Getting started Changing the SETUP menu
MENU/LIST button:
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title menu.’
2
POWER
Connections
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the playback. For example, the menu may
offer choices for subtitle languages, special features, or chapter
selection.
Sometimes these are displayed
automatically when you start playback, sometimes they only appear
when you press MENU/LIST button.
First:
3
VCR functions
Press MENU/LIST button to
exit the menu.
Recording
Editing
Note : DVD Disc Menu
37
Others Español
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
Playing discs
Basic playback (cont’d)
Playing discs using the title menu
DVD-V
Some DVDs have a title menu,
which lists the titles available.
It allows you to start playback at a
specific title.
First:
DVD
1
Press TOP MENU button.
The title menu will appear.
If the feature is not available on
the DVD disc,
may appear on
the TV screen.
2
Select a title to play using the
K / L / { / B buttons, then
press ENTER button.
Playback will begin at the title you
selected.
2
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
TOP MENU button:
Displays the ‘Title menu’ of a
DVD disc which varies with the
disc.
VCR
DVD
PLAY
STOP
REC/OTR
SETUP
Moves the cursor around screen.
Enter button:
Selects the currently highlighted
menu option.
1
2
3
TIMER PROG.
ENTER
REC MONITOR
K / L / { / B buttons:
PAUSE
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
2
SKIP
ONE TOUCH
DUBBING
Number buttons:
Selects a numbered menu option
(some discs only). Press ENTER
button after.
3
Press TOP MENU button to
exit the title menu.
Note : DVD Disc Menu
• The TOP MENU button will
not always active with all
DVDs.
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
38
Playing discs
Before you start
Special playback
Resume play
Video
DVD-V
DVD-R
DVD-RW
2
VR
CD
DVD-RW
MP3
1
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
PLAY
To cancel the resume play and
start playing the disc from the
beginning, press STOP C button
the second time while the playback is stopped.
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
2
1
2
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
Note : MP3
Resume ON
• For MP3 files, playback will
resume from the beginning of
the track at which playback
was stopped.
Playing discs
Fast forward / Fast reverse
DVD-V
DVD-R
Video
VR
DVD-RW
DVD-RW
CD
MP3
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
During playback, press D or E button.
Every time you press D or E button, approximate speed will be
changed as follows. (For DVD discs, the sound will be output during
playback in fast forward of x2 only if you set “Fast Forward with Audio”
to “ON” for the “Playback” setting in the SETUP menu.)
7
SPACE
h
x20
h
x5
h
Normal
speed
playback
g
h
g
x2
h
g
x20
For Audio CDs, approximate speed is set at x8 with sound.
For MP3 files, approximate speed is set at x16.
To return to the normal playback, press PLAY B button.
h
x40
VIDEO/TV
SLOW
DVD
VCR
PAUSE
PLAY
1
STOP
SETUP
REC MONITOR
MENU/LIST TOP MENU
TIMER PROG.
1
1
Recording
x40
g
CH
0
DISPLAY
REC/OTR
g
g
OPEN/CLOSE
VCR functions
1
POWER
Getting started Changing the SETUP menu
During playback, press STOP
C button.
The resume message will appear.
TV Screen:
REC SPEED
Connections
Press PLAY B button.
In a few seconds, playback will
resume from the point at which it
stopped last.You can resume play
at the same point even if you turn
off the unit.
You can resume play from where
you stopped playing the disc last.
POWER
ENTER
RETURN
Note : Slow Speed
Others Español
39
Editing
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x2:
x20:
x40:
Reverse (Approx. Speed)
x5:
x20:
x40:
Playing discs
Special playback (cont’d)
Skipping TV commercials during play
DVD-R
Video
VR
DVD-RW
DVD-RW
e.g. Press CM SKIP button once
7
8
9
SPACE
You can skip TV commercials by
pressing CM SKIP button, so that
you can enjoy the recorded programs with limited interruption.
SLOW
0
VCR
DISPLAY
DVD
PAUSE
PLAY
STOP
REC/OTR
CM Skip
30 sec.
1
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
During playback, press CM
SKIP button.
Normal playback will resume at
30 seconds ahead from the point
when you press CM SKIP button.
Every time you press CM SKIP
button, time will advance 30 seconds ahead.
You can press up to 6 times (180
seconds).
CLEAR/C.RESET ZOOM
(forwarding 30 seconds.)
SEARCH
MODE
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
1
B
Playback will resume automatically.
Pause
Video
DVD-V
DVD-R
DVD-RW
VR
DVD-RW
CD
MP3
1
2
Press PLAY B button to
resume play.
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
2
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
40
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
Playing discs
Step by step playback
Video
DVD-V
DVD-R
DVD-RW
2
VR
DVD-RW
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
SLOW
0
VCR
DISPLAY
Press SKIP G button
repeatedly.
Playback will advance one frame
(or step) at a time when you
press the skip G button with the
sound muted.
DVD
PAUSE
PLAY
1
3
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
2
3
Press PLAY B button to
resume play.
DVD-V
DVD-R
Video
VR
DVD-RW
DVD-RW
1
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
g
g
x1/4
h
x1/8
h
g
x1/16
g
Pause
h
h
g
x1/16
h
VCR
DVD
PAUSE
g
x1/8
h
x1/2
PLAY
1
STOP
REC/OTR
SETUP
REC MONITOR
MENU/LIST TOP MENU
TIMER PROG.
Recording
To return to the normal playback, press PLAY B button.
1
1
1
VCR functions
During playback, press PAUSE k button, then press D or E
button.
Every time you press D or E button, approximate speed will be
changed as follows. (The sound will remain mute.)
POWER
Playing discs
Slow forward / Slow reverse play
Getting started Changing the SETUP menu
To play step by step backward:
Press SKIP H button repeatedly.
Every time you press the button,
playback will go backward by one
frame.
Connections
1
SPACE
Before you start
Special playback (cont’d)
ENTER
RETURN
Note : Slow Speed
Others Español
41
Editing
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x1/16:
x1/8:
x1/2:
Reverse (Approx. Speed)
x1/16:
x1/8:
x1/4:
Playing discs
Special playback (cont’d)
Zoom
STOP
REC/OTR
Video
DVD-V
DVD-R
DVD-RW
VR
DVD-RW
1
During playback, press
ZOOM button.
Zoom menu will appear.
Screen:
1
1
x1.2
01:23:45
x1.5
2
Select a desired zoom factor
using { / B buttons, then
press ENTER button.
The zoom area will be displayed.
3
There are four options
(x1.0,x1.2,x1.5 and x2.0), these
are displayed excluding the current zoom rate.
1
SEARCH
MODE
SKIP
SKIP
2
3
ONE TOUCH
DUBBING
CM SKIP
Select a desired zoom position
using K / L / { / B buttons, then
press ENTER button.
The zoom play will start.
• When selecting a smaller factor
than the current one, the zoom
area will not be displayed.
• To remove the zoom menu, press
ZOOM button again at step 1.
• To cancel the zoom function,
select x1.0 using { / B buttons,
then press ENTER button.
Marker Setup
Screen for DVD:
Video
DVD-RW
1
VR
1
DVD-Video
01:23:45
CD
DVD-RW
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
Note : Zoom
x2.0
DVD-R
TIMER PROG.
ENTER
REC MONITOR
DVD-Video
B
DVD-V
SETUP
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
1
2
3
4
5
6
7
This feature allows you to assign
a specific point on a disc to be
recalled later.
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
1
DISPLAY
1
DVD
VCR
PAUSE
PLAY
STOP
During playback, press DISPLAY button.
The display menu will appear.
Screen:
REC/OTR
Screen for CD:
1
1
01:23:45
Audio CD
2
3
4
5
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
1
1
01:23:45
SETUP
RETURN
SKIP
SKIP
6
SEARCH
MODE
DVD-Video
CM SKIP
ONE TOUCH
DUBBING
2
3
4
Note : Marker
3
2
Select
icon using { / B
buttons, then press ENTER
button.
Marker setup menu will appear.
42
Select a desired marker number using { / B buttons.
When reaches the desired
point, press ENTER button.
4
To return to the marker later,
select the desired marker
number using { / B buttons,
then press ENTER button.
• To clear a marker, select the
marker number to be cleared,
then press CLEAR/C.RESET
button.
• All markers will be erased
when you do the following.
– Opening the disc tray.
– Turning off the power.
– Recording to a recordable
disc.
– Changing the mode between
Original and Playlist.(VR mode)
• You can mark up to 6 points.
Playing discs
Before you start
Search
Title/Chapter search
Video
DVD-V
DVD-R
DVD-RW
VR
DVD-RW
Using DISPLAY button
1
1
During playback, press DISPLAY button.
The display menu will appear.
Screen:
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
1
DISPLAY
VCR
DVD
PAUSE
PLAY
1
1
01:23:45
STOP
DVD-Video
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
To go back to the previous title
or chapter, press SKIP H button.The title or chapter will move
backward one title at a time.
AUDIO
MENU/LIST TOP MENU
2
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
1
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for title will be highlighted.
Playing discs
Title:
Enter a desired title number
to search using K / L buttons
or number buttons, then
press ENTER button.
Title search will start.
Chapter:
To move to ‘C’ for chapter, press
B button.
Enter a desired chapter number to search using K / L buttons or number buttons, then
press ENTER button.
Chapter search will start.
Getting started Changing the SETUP menu
During playback, press SKIP
G button to skip the current title or chapter and
move to the next.
The title or chapter will move
forward one at a time.
2
REC SPEED
Connections
Using SKIP H / G buttons
POWER
VCR functions
Recording
Editing
Others Español
43
Playing discs
Search (cont’d)
Track search
CD
MP3
Using SKIP H / G buttons
Using DISPLAY button
1
1
During playback, press SKIP
G button to skip the current track and move to the
next.
The track will move forward one
at a time.
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
01:23:45
Audio CD
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
1
VCR
DISPLAY
DVD
PAUSE
PLAY
STOP
To go back to the previous track,
press SKIP H button.The track
will move backward one track at
a time.
REC/OTR
SETUP
2
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for track will be highlighted.
SEARCH
MODE
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
2
3
1
3
Enter a desired track number
to search using K / L buttons
or number buttons, then
press ENTER button.
Track search will start.
Time search
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
Video
DVD-V
DVD-R
DVD-RW
VR
CD
DVD-RW
1
During playback, press DISPLAY button.
The display menu will appear.
Screen for DVD:
1
1
01:23:45
DVD-Video
2
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for title or track will be highlighted.
To move to the clock icon
press B button.
1
44
01:23:45
Audio CD
7
SPACE
VIDEO/TV
SLOW
1
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
Enter a desired time to
search using K / L buttons or
number buttons, then press
ENTER button.
Time search will start.
CH
0
DISPLAY
,
3
Screen for CD:
PQRS
OPEN/CLOSE
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
Note :Time Search
• Time search function is available only in the same track or
title.
Playing discs
Before you start
Repeat/Random/Program play
Repeat play
Video
DVD-V
DVD-R
DVD-RW
VR
CD
DVD-RW
MP3
PLAY button.
The display menu will appear.
1
1
01:23:45
DVD-Video
Chapter:
The current chapter will be played
repeatedly. (DVD only)
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
DEF
SPACE
SLOW
1
All:
The current disc will be played
repeatedly. CD, MP3 and DVDRW (VR mode only)
DVD
VCR
DISPLAY
Screen:
1
1
01:23:45
DVD-Video
OFF
Title
Chapter
A-B
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
2
3
ONE TOUCH
DUBBING
CM SKIP
Press ENTER button again to
select the ending point (B).
Track:
The current track will be played
repeatedly. (CD, MP3 only)
Group:
The current group will be played
repeatedly. (MP3 only)
Note : Repeat
• The A-B Repeat playback can
only be set with in the current title (for DVDs), or current track (for Audio CDs).
• To cancel repeat playback,
select OFF at step 2.
• You cannot select “Group”
during the random playback
of MP3 files.
Random play
CD
MP3
DVD
1
Press SETUP button to dis-
tons, then press ENTER button.
CD Playback Mode menu will
appear.
7
TUV
WXYZ
8
9
SPACE
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
CD Playback Mode
MENU/LIST TOP MENU
RETURN
Random Play
Program Play
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
Note : Stop
K / L buttons, then press
ENTER button.
Random playback will start.
• To cancel random playback,
press STOP C button twice
during random playback.
Setup Menu
45
Others Español
3
Select “Random Play” using
Editing
play SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
PQRS
2
Select “CD” using { / B but-
Recording
With this function, you can play a
disc randomly instead of playing in
the order on the disc.
First:
VCR functions
repeat using K / L buttons,
then press ENTER button.
The selected repeat play will start.
A-B:
The A-B point will be played
repeatedly.
When pressing ENTER button
while A-B is highlighted, the starting point (A) will be decided.
Playing discs
3
Select a desired option to
PAUSE
Getting started Changing the SETUP menu
icon using { / B buttons, then press ENTER button.
Repeat menu will appear.
CH
VIDEO/TV
0
MENU/LIST TOP MENU
2
Select
OPEN/CLOSE
Connections
1
During playback, press DIS-
Title:
The current title will be played
repeatedly. (DVD only)
Playing discs
Repeat/Random/Program play (cont’d)
Program play
CD
You can program the disc to play
tracks in your desired order.
First:
DVD
1
3
Select “Program Play” using
K / L buttons, then press
ENTER button.
Program play list will appear.
4
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
DISPLAY
SLOW
VCR
DVD
PAUSE
-- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --
5
PLAY
-- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --
Total
00:00:00
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
4
2
CH
VIDEO/TV
0
CD Playback Mode > Program Play
-- -- -- -- -- -- -- -- -- --
Setup Menu
OPEN/CLOSE
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
Select a desired track using K
/ L buttons, then press
ENTER button or B button.
A cursor will move to the next.
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
CD Playback Mode > Program Play
07 - - - - - - - - - - - - - - - -
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- --
---
Total
00:04:30
CD Playback Mode
Random Play
Program Play
5
Press PLAY B button to start
program playback.
Program playback will start.
Note : Program Playback
• To erase tracks you selected,
press CLEAR/C.RESET button.
• You can make up to 50 program settings.
• To cancel program playback,
press STOP C button twice
during program playback.
• You may also select a desired
track using Number buttons
at step 4.
46
Playing discs
Before you start
Selecting audio and video formats
You can select an audio or video format as you prefer depending on
the contents of the disc you are playing.
Switching audio soundtrack
DVD-RW
1
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
01:23:45
1
1
00:00:00
1 Dolby Digital Dual L/R
2 Dolby Digital 2ch ----
1 Dolby Digital 5.1ch English
2 Dolby Digital 2ch Japanese
DVD-Video
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
DEF
CH
VIDEO/TV
SLOW
1
3
Select a desired audio soundtrack using K / L buttons,
then press ENTER button.
<DVD-Video>
Audio soundtrack will switch.
<DVD-RW VR mode>
DISPLAY
00:00:00
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
1
VCR
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
DVD-RW
VR Original
2
3
4
L/R
L
R
Note : Dual Audio Sound
Tracks
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
• Some discs will only allow
you to change the soundtrack from the disc’s menu.
Press TOP MENU button or
MENU/LIST button to display
the disc’s menu.
• On DVD-RW discs recorded
in VR mode that may have
both a main and a sub audio
channel, you can switch to
main (L), sub audio (R) or a
mix of both (L/R).
Editing
4
Recording
00:00:00
ABC
GHI
OPEN/CLOSE
VCR functions
1
[email protected]/:
1
AUDIO
0
1 Dolby Digital Dual
2 Dolby Digital 2ch
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
<DVD-Video>
REC SPEED
SPACE
DVD-Video
2
POWER
7
1
1
DVD-RW
VR Original
Playing discs
1
<DVD-RW VR mode>
Getting started Changing the SETUP menu
When playing a DVD-Video disc
recorded with two or more
soundtracks (these are often in
different languages), you can
switch between them anytime
during playback.
On DVD-RW discs recorded in
VR mode, you can switch to main
(L), sub audio (R) or a mix of
both (L/R).
Connections
VR
DVD-V
Important
47
Others Español
• This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
Playing discs
Selecting audio and video formats (cont’d)
CD
MP3
When playing Audio CDs or MP3
files you can switch between
stereo, just the left channel or
just the right channel.
1
2
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
Audio CD
00:00:00
1
3
VCR
DISPLAY
DVD
PAUSE
PLAY
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
1
00:00:00
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
Audio CD
SEARCH
MODE
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
2
3
L/R
L
R
Switching subtitles
VR
DVD-V
DVD-RW
Many DVD Video discs have subtitles in one or more languages.
The case usually tells you which
subtitle languages are available.
Important
2
Select
icon using { / B
buttons, then press ENTER
button.
Subtitle menu will appear.
1
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
DEF
SPACE
• You can switch subtitle
languages anytime during
playback.
1
1
00:00:00
DVD-Video
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
OFF
1 English
2 Japanese
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
1
1
1
01:23:45
DVD-Video
TIMER PROG.
ENTER
REC MONITOR
During playback, press DISPLAY button.
The display menu will appear.
Screen:
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
3
Select a desired subtitle language using K / L buttons,
then press ENTER button.
Subtitle will be displayed in the
selected language.
When selecting “OFF,” subtitle will
disappear.
48
SETUP
SEARCH
MODE
RETURN
SKIP
CM SKIP
SKIP
ONE TOUCH
DUBBING
2
3
Note : Subtitle
• Some discs will only allow
you to change the subtitle
from the disc’s menu. Press
TOP MENU button or
MENU/LIST button to display
the disc’s menu.
Playing discs
Before you start
Selecting audio and video formats (cont’d)
Switching camera angles
DVD-V
1
2
Select
icon using { / B
buttons, then press ENTER
button.
Angle will switch each you press
ENTER button.
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
VCR
DISPLAY
DVD
PAUSE
PLAY
Important
STOP
REC/OTR
• It has to be during playback.
SETUP
TIMER PROG.
ENTER
REC MONITOR
The display menu will appear.
Screen:
1
1
01:23:45
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
DVD-Video
SKIP
2
SKIP
ONE TOUCH
DUBBING
CM SKIP
Getting started Changing the SETUP menu
1
During playback, press DISPLAY button.
POWER
Connections
Some DVD Video discs feature
scenes shot from two or more
angles, check the DVD disc
brochure for details: It should be
marked with an angle icon if it
contains multi-angle scenes.
Playing discs
Angle icon appears when an additional camera angle is available.
Reducing block noise
Video
DVD-R
DVD-RW
1
VR
1
00:00:00
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
AUDIO
OPEN/CLOSE
DVD-Video
DVD-RW
OFF
Type 1
Type 2
1
POWER
VCR functions
DVD-V
PQRS
7
During playback, press DISPLAY button.
The display menu will appear.
Screen:
DEF
SPACE
CH
VIDEO/TV
SLOW
0
1
DISPLAY
DVD
VCR
PAUSE
STOP
1
1
01:23:45
DVD-Video
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
ONE TOUCH
DUBBING
49
Others Español
Select
icon using { / B
buttons, then press ENTER
button.
Noise Reduction menu will appear.
Select a desired option using
K / L buttons, then press
ENTER button.
Your setting will be activated.
This function reduces noise in the
playback picture.When playing
back discs recorded in long time
mode such as SLP or SEP mode,
select "Type 1" or "Type 2".
("Type 2" is more effective.)
When playing back discs with little noise such as prerecorded
DVD-Video discs, select "OFF".
SETUP
Editing
2
3
REC/OTR
Recording
PLAY
VCR functions
Playback
VCR
3
1
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
Press POWER button on the
remote control or the front
panel of the unit.
When you are playing a tape, turn
the TV on and be sure to select
the input to which the DVD/VCR
is connected.
Press:
Press PLAY B button to
resume play.
2
5
Insert a prerecorded tape,
then press PLAY B button to
begin playback.
Press STOP C button to stop
playback.
VCR
1
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
4
AUDIO
2
4
VCR
DVD
PAUSE
3
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
5
Note : No Record Tab
6
Press STOP/EJECT C A button on the front panel of the
unit to eject the tape.
• When a tape without record
tab is inserted, the unit will
start playback automatically.
• Tracking will be automatically
adjusted upon playback.To
adjust the tracking manually,
press the CHANNEL K/L
buttons on the front panel of
the unit or CHK/CHL buttons on the remote control.
Recording and One-touch timer recording
Recording
SPACE
First:
VCR
Before recording, make sure:
• The desired channel is selected
by pressing Number buttons on
the remote control or CHANNEL K/L buttons on the front
panel of the unit.
• There is a tape with a record tab
in the DVD/VCR.
• The desired recording speed is
selected in SP (standard play) or
SLP (super long play) mode by
pressing REC SPEED button on
the remote control.
Recording speed:
Tape speed
Type of tape
SP mode
SLP mode
Recording/Playback Time
T60
T120
T160
2-2/3hours
1hour
2hours
3hours
6hours
8hours
• Stereo or SAP is selected.
• Refer to page 64 for instructions
on timer recording.
50
SLOW
0
DISPLAY
VCR
DVD
PAUSE
VCR
1
PLAY
1
STOP
Press REC/OTR button to
begin the recording.
To temporarily stop recording or
to resume it, press PAUSE F button. After the unit has been in
Pause mode for 5 minutes, it will
stop automatically to protect the
tape and the video head from
damage.
2
Press STOP button when the
recording is completed.
Accidental erasure prevention
To prevent accidental recording
on a recorded cassette, remove
its record tab.To record on it
later, cover the hole with cellophane tape.
Record tab
1
REC/OTR
REC MONITOR
SETUP
TIMER PROG.
2
ENTER
Note : Record View
channels
• To view one channel while
recording another
1) While you are recording
on the unit, press VIDEO/TV
button.
2) At the cable box or satellite box, select the channel
you want to view.
If you have connected the
unit to a cable box or satellite
box, refer to “Connection to
a Cable Box or Satellite Box”
section on page 11.
• If OTR is finished in VCR during playback or REC mode in
DVD, the VCR will be in
STOP mode and the DVD
keeps the current mode.
VCR functions
Before you start
Recording and One-touch timer recording (cont’d)
One-touch timer recording
SPACE
VCR
SLOW
0
VCR
DISPLAY
VCR
1
(Normal recording)
DVD
PAUSE
(1:00)
PLAY
(8:00)
(7:30)
STOP
When one-touch timer recording
is finished, the unit will turn off
automatically.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
1
REC/OTR
SETUP
TIMER PROG.
1
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
Note: OTR
• The remaining recording time
will appear on the display
panel during an OTR. Press
DISPLAY button to see it on
the TV screen.
• You cannot pause an OTR.
Search
Index search
VCR
VCR
Press SEARCH MODE button
twice so that the index search
menu appears.
Press g/h buttons to
start index search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After index search, the VCR will
play the tape automatically.
2
3
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
Pro. 2
01
Pro. 3
01
SPACE
Pro. 4
Pro. 5
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
3
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
End
of tape
02
03
INDEX MARK
OPEN/CLOSE
CLEAR/C.RESET ZOOM
1
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
Recording
02
Enter the number of recordings you wish to skip using
Number buttons with in 30
seconds.
ABC
GHI
MENU/LIST TOP MENU
CURRENT PROGRAM
Beginning
of tape
Pro. 1
2
2
[email protected]/:
1
AUDIO
VCR functions
1
3
REC SPEED
Playing discs
An index mark will be assigned at
the beginning of each recording
you make.You may skip to a specific marked point by following the
steps below.
First:
POWER
Getting started Changing the SETUP menu
During normal recording,
press REC/OTR button to
begin one-touch timer
recording.
You can select a fixed recording
length by pressing the REC/OTR
button repeatedly.
(0:30)
Connections
This feature allows you to set the
recording length simply by pressing
REC/OTR button on the remote
control or the front panel of the unit.
First:
Editing
INDEX SEARCH
03
• Every time a tape is recorded,
an index mark is written on
the tape.
51
Others Español
Note : Index Mark
VCR functions
Search (cont’d)
Time search
VCR
This feature allows you to go to a
specific point on a tape by entering the exact amount of time you
wish to skip in order to reach the
point.
First:
VCR
1
3
Press g/h buttons to
start time search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After time search, the unit will
play the tape automatically.
2
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
3
PLAY
STOP
REC/OTR
Press SEARCH MODE button
repeatedly so that the Time
search menu appears.
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
2
AUDIO
1
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
Enter your desired time to
skip using Number buttons
with in 30 seconds.
TIME SEARCH
2:50
Note :Tape Search
• These functions are not available during recording.
• Press STOP button to stop
the search.
• If the end of the tape is
reached during a Search, this
unit will cancel the search and
rewind the tape.
52
VCR functions
Before you start
Other operations
VCR
VCR
First:
To cue or review picture during playback (Picture Search):
Connections
Press g/h buttons during playback.
Press it again and the unit will search in super high speed. (in the SLP
mode only)
To freeze the picture on TV screen during playback (Still
mode):
Getting started Changing the SETUP menu
Press PAUSE F button. Each time you press the button, the picture will
be forwarded by one frame.
If the picture begins to vibrate vertically during the still mode, stabilize
the picture by pressing the CHANNEL K/L or CHK/CHL buttons.
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press CLEAR/C.RESET button.
To playback in slow motion:
Press SLOW
button during playback or the still mode.
If the noise bars appear on the TV screen, you can reduce it by pressing
CHANNEL K/L or CHK/CHL buttons.
Playing discs
When you playback a tape recorded in Hi-Fi stereo:
Press AUDIO button on the remote control to select HIFI or MONO
for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select “MONO”.
HIFI
MONO
Type of recorded tape
L-channel
R-channel
non Hi-Fi tapes
Monaural
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
L+R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Recording
Hi-Fi tapes
recorded second
audio program
VCR functions
Your Selection
Second audio Second audio Second audio
program
program
program
53
Others Español
• Still/Slow/Pause mode will be
automatically cancelled after 5
minutes to prevent damage to
the tape and the video head.
• To return to playback from
the Picture Search/Still/Slow
mode, press PLAY button.
Editing
Note : Pause Mode
Recording
Easy DVD recording
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit to the TV correctly.
Step 1: Choose a disc
type
Step 2: Insert
a blank
disc
There are several types of recordable
DVD discs to choose from. Choose a
recordable DVD disc type based on
your playing/recording/editing requirements. See “DVD disc type” below.
This unit can record on the following type of discs only.
1
2
3
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
OPEN/CLOSE
2
1
Select the DVD
mode
2
Select the recording
speed
2
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
1
SLOW
0
DISPLAY
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
OPEN/CLOSE
3
DVD
VCR
PAUSE
PLAY
STOP
SP 2:01 Rem.
Loading
This operation may
take a moment to
be recognized.
DVD disc types
Important
Format the disc
1
1
54
Close the disc tray
C
.
1
Open the disc tray
1
* This unit cannot record on the following discs.
• DVD-R General Ver 2.0 / 8x
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
For example, when you want to
record repeatedly on the same disc,
or when you want to edit the disc
after recording, select the
rewritable DVD-RW type disc.
When you want to save recordings
without any alteration, a nonrewritable DVD-R can be your
choice.
16 9
Turn on the unit
Remote Control
(or)
Step 3: Select the
Recording
speed
Insert the disc in the unit.
Then format the disc from
SETUP menu.Video format
(Video mode) or Video
recording format (VR mode)
will be available depending on
the disc type inserted.
This is necessary to prepare the disc for recording.
Details are on pages 58-60.
* When you format, the entire
contents on that disc will be
erased.
You will need to finalize the
discs recorded in Video mode
to play in other DVD players.
Recording
Before you start
Easy DVD recording (Cont’d)
Step 4: Select the
desired
channel
Step 5: Press
REC/OTR
Step 6: Stop the
Recording
SPACE
SLOW
0
JKL
4
5
6
PQRS
TUV
WXYZ
7
8
9
DISPLAY
CH
MNO
PLAY
SLOW
0
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
PAUSE
VIDEO/TV
SPACE
DISPLAY
DVD
VCR
Connections
GHI
STOP
VCR
DVD
PAUSE
REC/OTR
SETUP
TIMER PROG.
OPEN/CLOSE
ENTER
REC MONITOR
PLAY
5
6
TUV
WXYZ
7
8
9
SPACE
REC/OTR
VIDEO/TV
REC MONITOR
VCR
DVD
RETURN
TIMER PROG.
58%
ENTER
Writing to Disc
SLOW
MENU/LIST TOP MENU
0
DISPLAY
SETUP
RETURN
PAUSE
CH 1
This operation may take a
few minutes to complete.
I
Playing the recorded contents
Start Rec.
Title 1
Stop/Start
Stop Rec.
Title 2
What are titles and chapters?
The contents of DVD disc are generally divided into titles.
Titles may be further subdivided into chapters.
Playing discs
You can select the title you want to play from the displayed menu
and immediately start to play. Recorded contents are very accessible
on a disc, the procedure is really simple as you choose a title on a
chapter from the menu screen.
Getting started Changing the SETUP menu
4
PQRS
MENU/LIST TOP MENU
STOP
CH
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
You will find editing discs very easy.This unit offers convenient edit functions, which are possible only with
DVD-R/RW discs.
You can edit the following from a title list.
Recording
• Putting names on titles
• Setting pictures for thumbnails (VR mode)
• Setting/clearing chapter markers
• Deleting parts of titles or scenes (VR mode)
VCR functions
Editing the recorded disc
Title Delete :This deletes an entire scene permanently from the disc.
Scene Delete :This allows a user to edit within a specific scene (ex. commercials).
Original and Playlist (VR mode)
You can edit the recordings in Playlist without changing the original recordings. A Playlist does not take up
much disc space.
What “Original” or “Playlist” is for?
Editing
Throughout this manual, you will find Original and Playlist to refer to the actual content and the edited version.
• Original content refers to what’s actually recorded on the disc.
• Playlist content refers to the edited version of the disc; how the Original content is to be played.
55
Others Español
Finalizing a Disc
• This will allow a disc that is recorded on our unit to be played back on a different DVD player- without
finalization it will not be playable on another player.
• After finalizing a disc if the recording was in video mode, you can not edit any information that is on that disc.
• If you have recorded in VR mode on DVD-RW disc then editing is still permitted after finalizing.
Recording
Information on DVD recording
Information
Recording speed
This unit can record to DVD-R and DVD-RW discs.
When recording, you will need to select a recording
format between Video mode and VR mode depending on the disc format.The disc format for DVD-R
is always “Video format,” so the recording format
will be “Video mode”.
On the other hand, when recording to DVD-RW, the
recording format will be “Video mode” or “VR mode”
because a disc format is available between “Video
Recording format” and “Video format” for DVD-RW.
You can select a recording speed among 6 options,
and the recording time will depend on the recording speed you select as follows.
Logo
DVD-RW
DVD-R
Recording Recording
Video/Sound Quality
speed
time *
XP (1H)
60 min
SP (2H)
120 min
LP (4H)
240 min
12cm, single-sided, single layer rewritable
disc Approx. max. recording time (SEP
mode): 600 minutes (4.7GB)
EP (6H)
360 min
SLP (8H)
480 min
12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB)
SEP (10H) 600 min
Attributes
* This unit cannot record on the following discs.
• DVD-R General Ver 2.0 / 8x
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
(Highest)
(Lowest)
* This table is designed for a new single-sided 12cm
disc as the standard.The recording time are estimates and actual recording time may differ.
* The audio and video quality gets poorer as the
recording time becomes longer.
Restrictions on recording
Important
About Video mode and VR (Video Recording)
mode
Video mode is the same recording format as prerecorded DVD-Video discs purchased locally, so that
you can play in most DVD players.To play in other
DVD players, you will need to finalize the disc (see
page 71). If not finalized, you can play, record additionally or edit discs recorded in Video mode only
with this unit.
VR (Video Recording) mode is a basic recording
format for DVD-RW.You can record and edit
repeatedly.
You cannot record copy-protected video using this
unit. Copy-protected video includes DVD-Video
discs and some satellite broadcasts.
If copy-protected material is encountered during a
recording, the unit will pause or stop automatically
and an error message will be displayed on-screen.
Video that is “copy-once only” can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
When recording a TV broadcast or through an
external input, you can display copy control information on screen.
DVD players which are
compatible are
capable of playing DVD-RW recorded in VR mode.
What is “CPRM”?
CPRM is a copy protection system with scramble system regarding the recording of “copy
once” broadcast programs. CPRM stands for
Content Protection for Recordable Media.
This unit is CPRM compatible, which means
that you can record copy-once broadcast programs, but you cannot then make a copy of
those recordings. CPRM recordings can only be
made on DVD-RW discs formatted in VR
mode, and CPRM recordings can only be played
on players that are specifically compatible with
CPRM.
Disc type
Disc format
Functions
Video mode
Playing, limited recording,
limited editing
Video
DVD-RW
DVD-RW VR mode
VR
DVD-RW
Video mode
DVD-R
DVD-R
56
Playing, recording,
Original/Playlist editing
Playing, limited recording,
limited editing
Recording
Before you start
Information on DVD recording (cont’d)
Information on copy control
Some satellite broadcasts include copy-protected
information. For recording these, refer to the following.
VR
DVD-RW
After recording you must finalize disc in order to
play it on other DVD units.
ver.1.1
ver.1.1 CPRM compatible
ver.1.1
ver.1.1 CPRM compatible
DVD-R
ver.2.0
Finalizing*
Playable
This Unit
DVD player
Not Playable
Recordable
Not Recordable
* You cannot finalize discs in other DVD recorders.
After finalizing:
Note : Recording
To play in other DVD players, finalize discs
recorded on this unit with the following
condition.
Mode
DVD-R
ver.2.0
Video mode
DVD-RW
ver.1.1
ver.1.1 CPRM compatible
Video mode
VR mode
VCR functions
Disc type
Playing discs
• The audio and video quality gets poorer as the
Recording time becomes longer.
• This unit cannot record CD-R or CD-RW discs.
• DVD-R/RW and CD-R/RW discs recorded on a
personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty or if
there is dirt or condensation on the unit’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software publisher for more detailed information.)
• Discs recorded in Video mode on this unit cannot record additionally using other DVD
recorders.
• Once DVD-R/RW (Video mode) is finalized, you
cannot record additionally or edit.
• Even if DVD-RW (VR mode) is finalized, you can
record additionally to or edit.
• When DVD-R/RW (Video mode) is finalized, title
menu will be created automatically.
Getting started Changing the SETUP menu
DVD-RW
Video
Copy-free Copy-once Copyprohibited
Making discs playable in other DVD
player (Finalize)
Connections
Disc type / format
Important
Recording
Editing
Others Español
57
Recording
Formatting a disc
Choosing the recording format of a blank disc
Video
VR
DVD-RW
DVD-RW
When inserting a blank disc, the
unit will initialize the blank disc.
After initialization, you can record
to the disc with the recording format selected in SETUP menu.
You can select at what length the
recorder will create chapter mark
on the DVD disc recording.
3
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
DISPLAY
Dubbing Mode
1
VCR
DVD
PAUSE
Video mode
10 minutes
PLAY
Timer Programming
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
AUDIO
VCR
DVD
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
4
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
Select “DVD-RW Recording
Format” using K / L buttons,
then press ENTER button.
Option window will appear.
Setup > Recording
Setup Menu
2
3
4
5
DVD
mode
DVD-RW Recording Format Video
VR mode
VR
mode
Auto Chapter
10 minutes
Timer Programming
Dubbing Mode
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
VCR
DVD
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
Video mode has been selected as
the default.
5
Select “Video mode” or “VR
mode” using K / L buttons,
then press ENTER button.
The recording mode will be set.
Note : Disc Formatting
• The recording format setting
is effective only for DVD-RW
discs.You cannot change the
recording format on a DVD-R
disc. DVD-R discs will always
be in Video mode.
• You can not mix disc recording formats on a single DVD
discs. When you load a disc
once recorded before, the
recording format cannot be
changed even if you change it in
SETUP menu.
Note : Disc Error Massage
• When inserting a blank
DVD+R or DVD+RW disc,
the error message ("Disc
Error") will appear.This unit is
not compatible with a
DVD+R/RW disc.
• PLAYLIST will be created
automatically when recording
on DVD-RW in VR mode.
58
Recording
Before you start
Formatting a disc (cont’d)
6
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Setup > Recording
DVD
Timer Programming
Dubbing Mode
VR mode
OFF
5 minutes
10
minutes
10 minutes
15 minutes
VCR DVD
30 minutes
60 minutes
SLOW
VCR
DVD
PAUSE
PLAY
8
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
“10 minutes” has been selected as
the default.
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
6
7
ONE TOUCH
DUBBING
7
Playing discs
Select a desired time option
using K / L buttons, then
press ENTER button.
Chapter marks will be placed on
the DVD recording at the selected time interval.
Getting started Changing the SETUP menu
Auto Chapter
CH
VIDEO/TV
0
DISPLAY
DVD-RW Recording Format
OPEN/CLOSE
Connections
Select “Auto Chapter” using
K / L buttons, then press
ENTER button.
Option window will appear.
8
VCR functions
Press SETUP button to exit.
Recording
Editing
Note
59
Others Español
• In Video mode, the actual time
interval for chapter mark may
be shorter than the selected
time for 20 seconds or less.
Recording
Formatting a disc (cont’d)
Reformatting a disc
Video
VR
DVD-RW
DVD-RW
If you are using a DVD-RW disc,
by default it will be Video mode.
You can change this to VR mode
from SETUP menu.
1
4
Select “Yes” using { / B buttons, then press ENTER button.
Option window will appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
7
AUDIO
DEF
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
Disc
Place DVD-RW disc into the
unit.
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
DISPLAY
DVD
VCR
Format
PLAY
Finalize
Disc Protect OFF ON
Yes
STOP
No
REC/OTR
1
Are you sure?
Yes
No
* VR mode only
SETUP
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
CM SKIP
5
Select “Yes” using { / B buttons, then press ENTER button.
Formatting will start.
Setup Menu
2
Disc
58%
Formatting
Edit
Format
Finalize
Disc Protect OFF ON
6
Formatting is complete.
100% will be indicated.
3
Select “Format” using K / L
buttons, then press ENTER
button.
Option window will appear.
Disc
100%
Formatting
This operation may take a
few minutes to complete.
Edit
Format
Finalize
Disc Protect OFF ON
Yes
* VR mode only
No
SKIP
ONE TOUCH
DUBBING
2
3
4
5
Caution
Select “DISC” using { / B buttons, then press ENTER button.
DISC menu will appear.
* VR mode only
PAUSE
Edit
MENU/LIST TOP MENU
60
OPEN/CLOSE
• When you reformat the disc,
the contents of the disc will
be erased.
• If you want to cancel format
at step 5, select “No”.
Recording
Before you start
Basic recording
DVD-R
Video
VR
DVD-RW
DVD-RW
DVD
4
Select a desired channel to
record using CH K / L buttons or number buttons.
1
2
4
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH 1
DISPLAY
SLOW
VCR
DVD
PAUSE
5
PLAY
STOP
5
REC/OTR
SETUP
TIMER PROG.
5
CLEAR/C.RESET ZOOM
Press REC/OTR button to
start recording.
I mark will be displayed for 5
seconds.
SEARCH
MODE
6
ENTER
REC MONITOR
MENU/LIST TOP MENU
Select a recording speed
using REC SPEED button.
4
0
This operation may take a
few minutes to complete.
2
CH
VIDEO/TV
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
SP 2:01 Rem.
Press STOP C button to stop
the recording.
This operation may take a
few minutes to complete.
• Recording starts immediately
and continues until the disc is
full or you stop recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
• You cannot mix two formats on one DVD-RW disc.
When you load a disc once
recorded before, the
recording format cannot be
changed even if you change
it in SETUP menu.
• You cannot change the
recording speed during the
REC pause mode.
• You can change a channel
during the REC pause mode.
61
Others Español
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
6
Note : Recording
Editing
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
“Video mode” has been selected
as the default. Refer to “Choosing
the recording format of a blank
disc” on pages 58-59.
To pause the recording, press
PAUSE F button. Press REC/OTR
button to restart the recording.
Recording
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 58-60.
I
VCR functions
3
Playing discs
Refer to “Recording speed” on
page 56.
Getting started Changing the SETUP menu
Turn on the unit and load a
recordable disc.
Make sure that the TV is set on
the DVD/VCR.
OPEN/CLOSE
Connections
Follow the steps below to record
TV programs.
First:
Recording
Basic recording (cont’d)
Checking the recording picture quality
DVD-R
Video
VR
DVD-RW
DVD-RW
You can confirm the recording picture quality with the recording
speed you have selected before
attempting to record to a DVD disc.
First:
2
1
Press REC MONITOR button
again to exit.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DVD
DISPLAY
1
DVD
VCR
PAUSE
PLAY
STOP
While the unit is in STOP or
REC with a DVD disc inserted, press REC MONITOR
button.
The TV program will be on the
screen and the recording picture
quality with the recording speed
you have selected.
REC/OTR
1
2
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
CH 18
Rec Monitor
XP
If you want to change the
recording speed, press REC
SPEED button repeatedly.
The recording speed will be
changed as you press the button
as shown. Refer to “Recording
speed” on page 56.
• You cannot change the recording speed during recording.
XP
SP
LP
SEP
SLP
EP
Note : Sound Quality
• You cannot check the recording sound quality with the
Rec monitor function.
62
Recording
Before you start
One-touch timer recording
DVD-R
Video
VR
DVD-RW
DVD-RW
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the DVD/VCR.
Select a desired channel to
record using CH K / L buttons or number buttons.
2
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
5
AUDIO
SPACE
CH
4
VIDEO/TV
SLOW
0
Press REC/OTR button, then
press REC/OTR button
repeatedly until a desired
recording length (30 minutes
to 8 hours) appears on the TV
screen.
Recording will start.
DISPLAY
VCR
DVD
PAUSE
PLAY
STOP
5
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
5
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
This operation may take a
few minutes to complete.
Select a recording speed
using REC SPEED button.
Refer to "Recording speed" on
page 56.
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 58-60.
(Normal Recording) 1:00
8:00
7:30
When reaches the specified time,
the unit will be turned off automatically.
Note : Automatic Turn Off
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
This operation may take a
few minutes to complete.
63
Others Español
• The remaining recording time
will appear on the display
panel during an OTR. Press
DISPLAY button to see it on
the TV screen.
• You cannot pause an OTR.
• The unit will turn off automatically under the conditions
following.
1)No space remained on the
disc.
2)When a power failure
occurs.
• If OTR is finished in DVD
during playback or REC mode
in VCR, the DVD will be in
STOP mode and the VCR
keeps the current mode.
Editing
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
0:30
Recording
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
"Video mode" has been selected
as the default. Refer to "Choosing
the recording format of a blank
disc" on pages 58-59.
0:30
VCR functions
3
I
Playing discs
2
Getting started Changing the SETUP menu
DVD
4
Connections
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
First:
Recording
Timer recording
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
You can program the DVD/VCR to
record up to 8 programs, up to a
year in advance. Daily or weekly program recordings are also available.
• Be sure to set the clock before
making a timer programming.
• Insert a recordable disc or a
videotape with a recording safety tab.
4
Select “Timer Programming”
using K / L buttons, then
press ENTER button.
Timer Programming list will
appear.
You can choose the timer
programming menu by pressing TIMER PROG. button. In
this case, continue with step 5.
Setup > Recording > Timer Programming
Date
-------
Start
End
CH
DVD
VCR
Speed
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
DEF
SPACE
1
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
5
DVD
VCR
PAUSE
PLAY
Select an empty program line
using K / L buttons, then
press ENTER button.
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
6
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
CM SKIP
SKIP
ONE TOUCH
DUBBING
Enter the date using K / L
buttons, then press B button.
Setup Menu
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH VCR
Speed
JAN / 01 - - : - -AM - - : - -AM CH8 DVD
-------
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
2
3
4
5
6
7
e.g. January 1st
JAN/01
L
Daily
L
Setup
MON-SAT
When pressing L button at the
current date, timer recording
mode will change as follows.
L
MON-FRI
L
SAT
L
FRI
Playback Setting
L
L
SUN
3
L
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
Video mode
10 minutes
Timer Programming
Dubbing Mode
VCR
DEC/31
7
Enter the time to start and
to end using K / L buttons,
then press B button.
DVD
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH VCR
Speed
JAN/12 10 :00PM - - : - -AM CH8 DVD
-----
64
Note : Clock Setting
• If you have not set the
clock yet:
A clock setting window will
appear after step 4. Continue
with step 4 in “Auto Clock
Setting” on page 18 or
“Manual Clock Setting” on
pages 19-20 before making a
timer programming.
• Press { or B buttons to
move the cursor to the left
and the right in the timer
programming menu.
Recording
Before you start
Timer recording (cont’d)
8
10
Select the channel number to
Select a recording speed
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD
To record from the AV input
jacks, L1 or L2.
using K / L buttons, then
press B button.
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD
• To record on to a tape, select VCR.
• To record on to a disc, select DVD.
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
End
CH VCR
Speed
10:30PM CH8 DVD 1H
SLOW
DVD
VCR
DISPLAY
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
8
9
10
11
Note : Automatic Turn On
• After step 12, the unit will be
turned on automatically 2
minutes (For VCR recording,
10 seconds) in advance of the
recording time.The recording
will start at the recording
time you set.
Checking, canceling, or correcting the timer programming
information
4
Press POWER button so that
indicator disappears from the
front display.
To clear the timer programming,
select your desired program
using K / L buttons, then press
CLEAR/C.RESET button.
2
Press TIMER PROG. button.
Timer Programming list will appear.
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD 1H
3
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
4
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
2
5
4
SKIP
ONE TOUCH
DUBBING
Press TIMER PROG. button to exit.
6
Press POWER button to return
to the timer standby mode.
Press STOP C button to stop the disc recording or STOP/EJECT C A to
stop the tape recording on the front panel of the main unit. STOP C button on the remote control will not work.
65
Others Español
To stop the timer recording in process
Note :Timer Programming
• Press TIMER PROG. button to
check the timer programming
in process.
When the timer recording is
proceeding, that program will
be red highlighted. In this case,
you cannot select any other
program.
Editing
Check the information on the
list.
REC SPEED
7
To correct the timer programming, select your desired program using K / L buttons, then
press ENTER button.
Next, correct the timer programming
using K/L/{/B buttons.
Finally, press ENTER button again.
5
POWER
Recording
Setup > Recording > Timer Programming
1
6
VCR functions
1
Playing discs
Press POWER button to turn off.
indicator will appear on the
front display.
CH
VIDEO/TV
0
11
12
OPEN/CLOSE
DEF
SPACE
Refer to “Recording speed” on page
56 for DVD or page 50 for VCR.
Press ENTER button when all
information required is
entered.
Your program setting will be
stored.
• To set another program, repeat
steps 5 to 11.
• To exit, press SETUP button.
AUDIO
Getting started Changing the SETUP menu
9
Select a recording media
12
using K / L buttons.
REC SPEED
Connections
record using K / L buttons,
then press B button.
POWER
Recording
Timer recording (cont’d)
Hints for timer recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.
Please insert a recordable disc.
• If a tape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and timer
recording cannot be performed. Please insert a recordable tape.
• When all the timer recording is completed, the
indicator flashes.To play or eject the recorded disc (or the tape),
press POWER button first and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT C A) button.
•
Important The timer recording can not be performed in DVD and VCR at the same time.
If you set two programmings with the same channel and time both in DVD and VCR, the programming
that has priority will be recorded (see below for details).
• During timer recording or timer standby (
indicator is on the front display), any operations on the unit will not be
available.To make these operations available, cancel the timer recording or timer standby first (
indicator disappears).
• To cancel the timer standby mode, press POWER button.
• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc
reaches at the end during the recording, the unit turns itself off.
• When the programmed Start and End time are earlier than the current time, the recording will be set on the same
date in the next year.
• If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on for recording
standby right after you turn the power off. For a videotape recording, the power will turn on shortly before the Start time.
• If a videotape ends during timer recording, the unit will stop, eject the videotape, and turn itself off.
• When two or more programmings are overlapped, “Overlap” will be displayed.
The priority of overlapped settings
This unit records the programs according to priority if timer programmings are overlapping.The timer programming set
first has priority.
A timer recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapping timer programmings and change the priority if necessary.
A programming set previously has priority
When the starting time is same:
A program with a lower program number
(PROG.1) has priority.
When some programming have been made at
the end time of the programming currently
being recorded:
A program with a lower program number (PROG. 2) has
priority.
ex. 2
ex.1
PROG. 1
PROG. 1
PROG. 2
PROG. 2
PROG. 3
Actual
recording
PROG. 1
Actual
recording
PROG. 2
PROG. 1
PROG. 2
When the recording time is partially overlapped:
PROG. 1 will start after PROG. 2 is complete to be recorded.
When the recording time is entirely overlapped:
PROG. 1 will not be recorded.
PROG. 1
PROG. 1
PROG. 2
PROG. 2
Actual
recording
PROG. 2
Actual
recording
PROG. 1
PROG. 2
Note for DVD timer recording
• When the recording time of
two programs are overlapped,
or the End time of a program
and the Start time of another is
the same, the first 20-90 seconds of the subsequent program will be cut off.
When the end time of the programming currently being recorded
and the program to be recorded sequentially are same:
PROG. 1
PROG. 2
Actual
recording
PROG. 1
PROG. 2
The first 20-90 seconds will be cut off.
66
Recording
Connection to an external source
OUTPUT
S- VIDEO
VIDEO
OUTPUT
Another source
(VCR camcorder etc.)
AUDIO
L
R
S -VIDEO
R
L
or
or
Video
cable
S-Video
cable
Audio
cable
Video
cable
Audio
cable
DVD
S-VIDEO
S-VIDEO
VIDEO
DVD/VCR
AUDIO IN
or
L - AUDIO - R
L
R
IN
To LINE 2 IN
Getting started Changing the SETUP menu
S-Video
cable
VIDEO AUDIO
VIDEO IN
To LINE 1 IN
OPEN/CLOSE
DIGITAL
AUDIO
AUDIO OUT OUT
POWER
REW
F.FWD STOP/EJECT
ONE TOUCH
DUBBING
PLAY
VCR RECORD
STOP
VCR
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
PLAY
DVD RECORD
OUTPUT SELECT
CHANNEL
CB
L
S-VIDEO
VIDEO
L - AUDIO - R
COAXIAL
IN
DVD
R
DVD -RW/-R
DVD/VCR
AUDIO IN AUDIO OUT ANTENN
IN
L
L
R
R
VIDEO IN VIDEO OUT
OUT
CR
OUT
Front of this unit
Setup > Select Video
DVD
Rear of this unit
1. Press SETUP button to display
SETUP/DISC menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video” using K / L / { / B
buttons, then press ENTER button.
Setup > Select Video
DVD
L1 (Rear)
Video In
L1 (Rear)
Video In
L2 (Front)
Video In
L2 (Front)
Video In
Setup > Select Video
L2 (Front)
DVD
Video
Video
In In
S-Video
Video In
Setup > Select Video
DVD
Setup > Select Video
L1 (Rear)
L2 (Front)
DVD
Video
Video
In In
S-Video
Video In
5. Select the input jack type to connect using
K / L buttons, then press ENTER button.
If you want to use S-VIDEO IN, select “S-Video In”.*
If you want to use VIDEO IN (Composite), select
“Video In”.
Setup > Select Video
Editing
5. Select the input jack type to connect using
K / L buttons, then press ENTER button.
If you want to use S-VIDEO IN, select “S-Video In”.*
If you want to use VIDEO IN (Composite), select
“Video In”.
4. Select “L1 (Rear)” using K / L buttons,
then press ENTER button.
Recording
L1 (Rear)
VCR functions
4. Select “L2 (Front)” using K / L buttons,
then press ENTER button.
Playing discs
1. Press SETUP button to display SETUP/DISC
menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video” using K / L / { / B
buttons, then press ENTER button.
Connections
Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).
When you want to record to a tape, use either DVD/VCR VIDEO IN jack (Rear) or VIDEO input jack
(Front). S-VIDEO input is useful only in DVD mode.
Use S-Video or Video cable, and an Audio cable for this connection.
Before you start
Settings for an external source
DVD
Video In
L1 (Rear)
S-Video In
L2 (Front)
S-Video In
L2 (Front)
Video In
67
Others Español
L1 (Rear)
Recording
Settings for an external source (cont’d)
Recording from an external source
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
Before recording from an external source, see the instruction for the connection on page 67.
1. Turn the TV and the DVD/VCR on, and be sure to select the
input of the TV to which the DVD/VCR is connected.
DVD
4
1
2. When you want to record to a disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record onto, then press open/close again.
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
2
CH
VIDEO/TV
SLOW
0
This operation may take a few minutes to complete.
DISPLAY
VCR
When you want to record to a tape: Press:
Insert the tape with a safety tab into the cassette compartment.
3. Select the input (L1 or L2) to which the external equipment
is connected.
•To use the input jacks on the back of this unit, select “L1” position by
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L2” position
by pressing [0],[0],[2] on the remote control or the CH K / L buttons.
4. Select a recording speed using REC SPEED button. Refer to
“Recording speed” on page 56 for DVD or page 50 for VCR.
XP
SP
LP
SP
SEP
SLP
DVD mode
SLP
EP
VCR mode
5. Press REC/OTR button on the DVD/VCR to start recording.
6. Press PLAY button on the external source that you are
recording from.
7. For disc:
Press STOP C button on the DVD/VCR to stop recording.
This operation may take a few minutes to complete.
For tape:
Press STOP/EJECT C A button on the unit to stop recording.
68
VCR
DVD
3
PAUSE
PLAY
STOP
5
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
7
Recording
Before you start
Dubbing Mode
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
Important
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
1
Playback Setting
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
3
CLEAR/C.RESET ZOOM
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
Setup > Recording
DVD-RW Recording Format
CM SKIP
SKIP
SKIP
ONE TOUCH
DUBBING
2
3
4
DVD
Video mode
10 minutes
Playing discs
Auto Chapter
SEARCH
MODE
RETURN
Timer Programming
Dubbing Mode
VCR
DVD
4
Select “Dubbing Mode” using
K / L buttons, then press
ENTER button.
Option window will appear.
DVD-RW Recording Format
Auto Chapter
VCR
DVD
Video mode
OFF
Timer Programming
Dubbing Mode
VCR
DVD
Note : Videotape
tracking control
69
Others Español
Instructions continue on page 70.
Editing
For VCR to DVD duplication:
• After start VCR to DVD duplication, the picture may be distorted because of the auto
tracking function of the videotape.
This is not a malfunction. Be
advised to playback the tape
until the picture is stabilized,
then set the starting point
which you wish to start
recording, and start VCR to
DVD duplication.
Recording
Setup > Recording
Setup Menu
VCR functions
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Getting started Changing the SETUP menu
PLAY
MENU/LIST TOP MENU
Make sure:
• Insert a disc and a videotape
with a safety tab.
Note for recording to a tape:
• The videotape's record tab is
intact.
• The videotape has enough time
to record the DVD disc.
Note for recording to a disc:
• The DVD disc is compatible
with the recording mode. Refer
to pages 56-57.
OPEN/CLOSE
Connections
You can copy a DVD disc to a
videotape or copy a videotape to
a DVD disc.This function will be
possible only if the DVD disc or
the videotape is not copy protected.
Before starting this function, prepare for the recording on the
DVD-R/RW disc or the videotape.
Refer to pages 50, 61-62.
2
Recording
Dubbing Mode (cont’d)
VCR to DVD
DVD to VCR
5
5
Select “VCR ⇒ DVD” using K
/ L buttons, then press
ENTER button.
Select “VCR ⇐ DVD” using K
/ L buttons, then press
ENTER button.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
OPEN/CLOSE
AUDIO
DEF
7-a
7-b
CH
VIDEO/TV
SPACE
SLOW
0
DVD-RW Recording Format
Auto Chapter
VCR
Setup > Recording
DVD
DVD-RW Recording Format
Video mode
OFF
Auto Chapter
Timer Programming
Dubbing Mode
VCR
Dubbing Mode
PAUSE
DVD
Video mode
OFF
Timer Programming
VCR
VCR DVD
DVD
VCR DVD
DVD
VCR
DISPLAY
Setup > Recording
VCR
VCR DVD
DVD
VCR DVD
6
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C.RESET ZOOM
SEARCH
MODE
6
Press SETUP button to exit
SETUP menu.
Make sure to select a recording
speed using REC SPEED button.
Press:
Press SETUP button to exit
SETUP menu.
Press:
VCR
7-a
CM SKIP
5
RETURN
MENU/LIST TOP MENU
6
9-a
9-b
PLAY
SKIP
SKIP
ONE TOUCH
DUBBING
8
VCR
Make sure to select a recording
speed using REC SPEED button.
Press:
7-a
DVD
7-b
OPEN/CLOSE
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
8
Press ONE TOUCH DUBBING button on the unit or
ONE TOUCH DUBBING
button on the remote control.
VCR to DVD duplication will start.
9-a
Press STOP C button on the
unit or STOP C button on
the remote control to stop
the recording.
70
7-b
POWER
REW
F.FWD STOP/EJECT
ONE TOUCH
DUBBING
PLAY
VCR RECORD
STOP
VCR
PLAY
DVD R
OUTPUT SELECT
CHANNEL
DVD
DVD
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
8
Press ONE TOUCH DUBBING button on the unit or
ONE TOUCH DUBBING
button on the remote control.
DVD to VCR duplication will start.
9-b
Press STOP/EJECT C A button on the unit or STOP C
button on the remote control
to stop the recording.
9-b
8 9-a
Note : Dubbing
• When you turn off the unit
after set the Dubbing Mode
to
, the setting
will be set to
automatically.
• Dubbing Mode is available
only if the tape or disc is not
copy protected.
• You cannot change the output
mode during VCR to DVD or
DVD to VCR duplication.
For VCR to DVD duplication:
• The playback sound mode is
followed by the setting of
VCR playback sound mode on
page 53. Set the playback
sound mode to which you
wish to record to the DVD.
Recording
Before you start
Finalizing the discs
DVD-R
Video
VR
DVD-RW
DVD-RW
Important
REC SPEED
AUDIO
Disc
[email protected]/:
1
ABC
DEF
2
3
Edit
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
Format
PQRS
Finalize
7
Disc Protect OFF ON
Yes
OPEN/CLOSE
CH
VIDEO/TV
SPACE
SLOW
0
No
DVD
VCR
DISPLAY
PAUSE
PLAY
* VR mode only
STOP
REC/OTR
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Select “Yes” using { / B buttons, then press ENTER button.
Finalizing will start.
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
4
2
3
4
Note : Finalizing
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
58%
Finalizing
Setup Menu
2
58%
Disc
Finalizing
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
Edit
Format
Finalize
Disc Protect OFF ON
5
Finalizing is complete.
Select “Finalize” using K / L
buttons, then press ENTER
button.
Option window will appear.
100%
Finalizing
This operation may take a
few minutes to complete.
71
Others Español
3
Undo Finalize
To release the finalizing for
the disc, select “Undo
Finalize” at step 3.
• If
appear when pressing
STOP button, you cannot cancel finalizing because the finalizing process is in progress.
When selecting “No” and
press ENTER or RETURN
button, finalizing will be continued.
Important You cannot
cancel finalizing of a DVD-R
disc once it has started.
*DO NOT power off during
finalizing, this will result in
malfunction.
Editing
* VR mode only
Format
Recording
Disc
Edit
Select “Yes” using { / B buttons, then press ENTER button.
Finalizing is cancelled, then the
unit will be in stop mode.
VCR functions
Do you want to cancel?
Yes
No
Playing discs
To cancel finalizing, press STOP C
button.
• Finalizing discs in Video mode
automatically create title
menus.
• Once you have finalized a disc
recorded in Video mode, you
cannot edit or record anything else on that disc.
Discs recorded in VR mode
can still be recorded and edited on this unit even after
finalized.
• When you insert a DVD-RW
disc finalized with this unit,
“Undo Finalize” will appear
instead of “Finalize”.
Getting started Changing the SETUP menu
1
4
SETUP
Connections
You will need to finalize discs
recorded in Video mode to play in
other DVD players.
Finalizing may take several minutes up to an hour. (A disc
recorded in Video mode can take
up to 15 minutes. A disc recorded
in VR mode can take up to 60
minutes.) A shorter recording
period on the disc will require a
longer time period for finalization.
Do not unplug the power cord
during finalization.
Details are an pages 56-57.
POWER
Recording
Setting a disc to protect
VR
DVD-RW
Important
To prevent accidental recording,
editing or erasing of titles, you can
protect them by going to the
DISC menu and following the
steps bellow.
3
Select “Disc Protect OFF ➔
ON” using K / L buttons,
then press ENTER button.
Option window will appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Disc
DISPLAY
DVD
VCR
PAUSE
Edit
1
Format
Finalize
PLAY
Disc Protect OFF
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
ON
STOP
Yes
No
REC/OTR
1
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
4
SEARCH
MODE
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
Select “Yes” using { / B buttons, then press ENTER button.
A disc will be protected.
2
3
4
Setup Menu
2
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
Disc
Edit
Format
Finalize
Disc Protect OFF ON
58%
Writing to Disc
This operation may take a
few minutes to complete.
Note : Disc Protect
• The Disc Protect setting is
available only when a disc
with VR mode is inserted.
• You can select only Disc
Protect Menu when a protected disc is inserted.
To cancel the disc protect:
• When you insert a disc protected with this unit, “Disc
Protect ON → OFF” will
appear instead of “OFF →
ON”.
Disc
Edit
Format
Finalize
Disc Protect ON
Yes
OFF
No
To release the protect for the
disc, select “Disc Protect ON
→ OFF” at step 3, then select
“Yes”.
72
Editing
Editing discs in Video mode
Title list allows you to easily check the titles recorded on the disc.You can choose a title to play from on
this screen and easily edit the titles as you prefer.
You can edit discs in Video mode for the following items.
Note that once you edit titles, they will not remain as
recorded originally.
• Deleting titles (Refer to page 75)
• Putting names on titles (Refer to pages 76)
• Setting or clearing chapter markers (Refer to page 77)
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
JAN/1 5:00AM
JAN/1 6:00AM
4
JAN/1 4:00AM
1
Note : Disc Editing
2
7
• Once a disc is finalized, then editing the disc or
recording to the disc will not be available.
(Except DVD-RW discs in VR mode.)
• A playlist is not available with the DVD-R discs
and DVD-RW discs in Video mode.
Disc > Edit > Original
1
JAN/1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
Getting started Changing the SETUP menu
1
Connections
Guide to a title list
Before you start
Information on disc editing
0:01:25
6
5
Playing discs
8 3
4
VCR functions
1. Titles recorded on the disc can be selected for
editting purposes by pressing ENTER button
with the cursor on the title.
2. Protect icon will appear if the title has been
protected.
3. The selected title thumbnails from the title list.
4. This menu provides you with all the editing
options.
The available menu options depend on disc and
recorded format type.
5. Details of the title, which can be changed
through editing.
6. Time status bar of the title to show length of
title.
7. The arrow icon, which means the title list
includes a next or a previous page. Press B or
{ button by following direction of the icon.
8. Playback status of the current disc.
Recording
Editing
Others Español
73
Editing
Information on disc editing (cont’d)
Editing discs in VR mode
For discs in VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the
original.
Editing original titles
Editing playlists
The following items can be used to edit the original
titles.
• Deleting titles (Refer to page 78)
• Deleting parts of titles (Refer to pages 79-80)
• Naming Titles (Refer to pages 80-81)
• Setting or clearing chapter markers (Refer to
pages 82-83)
• Setting pictures for thumbnails (Refer to pages
83-84)
• Title protection (Refer to page 85)
• Releasing titles from protection (Refer to page
86)
You can create a playlist from original titles, so that
you can edit as you prefer without losing original
titles.
The following items you can edit with a playlist.
• Deleting titles (Refer to page 87)
• Deleting parts of titles (Refer to pages 88-89)
• Naming Titles (Refer to pages 89-90)
• Setting or clearing chapter markers (Refer to
pages 91-92)
• Setting pictures for thumbnails (Refer to pages
92-93)
• Adding titles to a Playlist (Refer to page 94)
• Deleting a Playlist (Refer to page 95)
Important : Rearranging Titles
• Original titles once edited will not remain as recorded originally.When you want to leave the original as
it is, edit the playlist as you prefer. (Refer to pages 87-95)
Note : Editing
• DVD-RW editing possibilities are explained on pages 75-95.
• DVD-R editing possibilities are explained on pages 96-97.
74
Editing
Before you start
Editing DVD-RW discs in Video mode
Deleting titles
Video
DVD-RW
3
Important
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Caution
DISPLAY
1
1
DVD
PAUSE
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
SEARCH
MODE
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C.RESET ZOOM
4
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
6
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
1
Title Delete
Edit Title Name
Chapter Mark
Yes
Disc
JAN/ 1 1:00AM CH12
Playing discs
Disc > Edit
Getting started Changing the SETUP menu
DVD
SLOW
VCR
PLAY
JAN/ 1 1:00AM CH12
When the last title in the title list
in Video mode is deleted, the disc
space available for recording will
be increased.
First:
CH
VIDEO/TV
0
Disc > Edit
• Be sure to know that titles
once deleted, cannot be
brought back to the disc.
OPEN/CLOSE
Connections
• You can delete titles which
you do not need anymore.
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
No
XP
0:01:25
Edit
VCR functions
Format
Finalize
5
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Recording
2
Disc > Edit
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
1
Title Delete
Edit Title Name
Chapter Mark
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
This operation may take a
few minutes to complete.
5
JAN/1 5:00AM
6
After writing to disc is completed, press SETUP button
to exit DISC menu.
75
Others Español
JAN/1 4:00AM
Editing
Disc > Edit
Editing
Editing DVD-RW discs in Video mode (cont’d)
Putting names on titles
Video
DVD-RW
You can put title names on titles
and change the title names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
4
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
5
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
1
CH
VIDEO/TV
SPACE
Disc > Edit > Edit Title Name
1
OPEN/CLOSE
DEF
PQRS
7
DVD
AUDIO
SLOW
0
ABC
abc
123
@!?
VCR
DISPLAY
DVD
PAUSE
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
JAN/ 1 1:00AM CH12 XP
0:01:25
STOP
1
7
REC/OTR
Format
Finalize
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
5
CLEAR/C.RESET ZOOM
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Edit
SETUP
SEARCH
MODE
1
2
3
4
5
6
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
Disc > Edit > Edit Title Name
ABC
abc
123
@!?
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit
1
2
1
JAN/1 1:00AM
JAN/1 2:00AM
4
JAN/1 4:00AM
3
JAN/1 3:00AM
5
JAN/1 5:00AM
JAN/ 1 1:00AM CH12 XP
area for entering title names
When you finish entering a title
name, press ENTER button.
1
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
ABC
abc
123
@!?
Yes
No
abc
Writing to Disc
Disc > Edit
1
JAN/ 1 1:00AM CH12
0:01:25
76
This operation may take a
few minutes to complete.
7
XP
123
@!?
[Step2]: Press Number buttons following by the list
below.
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’()*
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
3
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
Select
6
Disc > Edit > Edit Title Name
Title Delete
Edit Title Name
Chapter Mark
[ Guide to edit title name ]
0:01:25
After writing to disc is completed, press SETUP button
to exit DISC menu.
0
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
* Press 1 button, character set will be changed
to the " @!? " mode automatically.
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.CRESET button
to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Editing
Before you start
Editing DVD-RW discs in Video mode (cont’d)
Setting or clearing chapter markers
Video
DVD-RW
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
0:01:25
CH
VIDEO/TV
SLOW
0
DISPLAY
4
OPEN/CLOSE
DEF
PQRS
7
XP
AUDIO
VCR
DVD
PAUSE
PLAY
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
CM SKIP
Disc > Edit
1
Disc
Edit
Format
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
Finalize
JAN/ 1 1:00AM CH12
XP
Playing discs
0:01:25
5
2
Select a desired time using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
1
Disc > Edit
1
2
Yes
3
JAN/ 1 1:00AM CH12
JAN/1 1:00AM
4
JAN/1 4:00AM
JAN/1 2:00AM
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
No
Recording
1
VCR functions
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
XP
0:01:25
JAN/1 3:00AM
5
JAN/1 5:00AM
Select “Yes” using { / B buttons, then press ENTER button.
Chapter markers will be added at
a specified time.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
Note : Markers
• You cannot place markers
beyond the length of a title.
• When recording at the
recording speed other than
XP or SEP, the length of chapters may be slightly longer or
shorter than the one specified at the step 5.
• A chapter marker may be
delayed according to the
recording content.
77
Others Español
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
6
Editing
3
Getting started Changing the SETUP menu
DVD
Disc > Edit
Connections
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can set chapter markers at a
specified time you selected for
titles which are longer than 5
minutes.
First:
Editing
Editing DVD-RW discs in VR mode (Original)
Deleting titles
VR
DVD-RW
When a title is deleted from an
original list in VR mode, the disc
space available for recording will
be increased.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Important
1
JAN/ 1 1:00AM CH12
DVD
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
XP
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
1
Format
Finalize
Disc Protect OFF ON
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Disc > Edit
6
Caution
• Once a title has been deleted,
it can not be brought back.
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit > Original
Original
1
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
few minutes to complete.
Disc > Edit > Original
78
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Disc > Edit > Original
JAN/1 5:00AM
ABC
DISPLAY
VCR
DVD
PAUSE
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Edit
JAN/1 4:00AM
[email protected]/:
1
SPACE
5
Disc
5
AUDIO
7
0:01:25
4
REC SPEED
PQRS
Disc > Edit > Original
• Be advised that the titles once
deleted cannot be brought
back to the disc.
First:
POWER
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Deleting parts of titles
VR
DVD-RW
Important
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
• Be advised that parts, once
deleted, cannot be brought
back to the disc.
7
Disc > Edit > Original
1
DVD
JAN/ 1 1:00AM CH12
SPACE
1
0:01:25
DISPLAY
Disc
DVD
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
MENU/LIST TOP MENU
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
Edit
Disc > Edit > Original
Finalize
Disc Protect OFF ON
1
2
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Playing discs
JAN/ 1 1:00AM CH12
PAUSE
PLAY
5
Format
VIDEO/TV
SLOW
VCR
REC MONITOR
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
CH
0
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
OPEN/CLOSE
XP
0:00:55
Note
3
Disc > Edit > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
JAN/1 5:00AM
Start point End point
Before
editing
Edited
Instructions continue on page 80.
79
Others Español
5
<Preview>
Editing
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Recording
Press ENTER button to
decide a start point.
Then press ENTER button to
decide an end point.
A cursor will move to “Preview.”
You can check a preview.
Original
JAN/1 4:00AM
Select Start-End Point.
• The DVD will begin to play in
the window.
Disc > Edit
4
6
VCR functions
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Getting started Changing the SETUP menu
First:
POWER
Connections
You can delete part of a title, the
disc space available for recording
will be increased.
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
7
8
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
Select “Yes” using { / B buttons, then press ENTER button.
Part of a title will be deleted.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
1
CH
VIDEO/TV
SLOW
0
DVD
VCR
PAUSE
Disc > Edit > Original
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
JAN/ 1 1:00AM CH12
OPEN/CLOSE
DEF
SPACE
DISPLAY
Disc > Edit > Original
AUDIO
1
No
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
JAN/ 1 1:00AM CH12
XP
0:01:25
PLAY
9
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
No
XP
MENU/LIST TOP MENU
RETURN
Writing to Disc
CLEAR/C.RESET ZOOM
SEARCH
MODE
This operation may take a
few minutes to complete.
9
After writing to disc is completed, press SETUP button
to exit DISC menu.
SKIP
SKIP
7
8
ONE TOUCH
DUBBING
CM SKIP
Note : Marker numbers
greater than 900
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Naming Titles
VR
DVD-RW
You can put title names on titles
and change the title names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
DVD
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
Disc > Edit
1
VCR
DVD
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
STOP
REC/OTR
SETUP
Original
Edit
Format
Finalize
Disc Protect OFF ON
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
Disc
80
PAUSE
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
6
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
CH
VIDEO/TV
SPACE
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
ABC
abc
123
@!?
1
JAN/ 1 1:00AM CH12 XP
JAN/1 4:00AM
JAN/1 5:00AM
PLAY
STOP
8
5
PAUSE
REC/OTR
SETUP
0:01:25
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
area for entering title names
When you finish entering a title
name, press ENTER button.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Disc > Edit > Original
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
[ Guide to edit title name ]
1
0:01:25
ABC
abc
123
@!?
No
abc
ABC
abc
123
@!?
This operation may take a
few minutes to complete.
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’()*
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
0
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
Recording
1
Writing to Disc
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
VCR functions
Yes
5
Disc > Edit > Original > Edit Title Name
ONE TOUCH
DUBBING
CM SKIP
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
XP
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
SKIP
7
Disc > Edit > Original > Edit Title Name
JAN/ 1 1:00AM CH12
SEARCH
MODE
3
4
5
6
7
RETURN
SKIP
Playing discs
1
CLEAR/C.RESET ZOOM
Getting started Changing the SETUP menu
1
2
DVD
VCR
DISPLAY
1
SLOW
0
Disc > Edit > Original > Edit Title Name
Disc > Edit > Original
Connections
3
* Press 1 button, character set will be changed
to the " @!? " mode automatically.
JAN/ 1 1:00AM CH12 XP
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.CRESET button
to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Others Español
81
Editing
0:01:25
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can search for it
using the chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the original list comes
to 999 in total, you cannot add
any more chapter markers.
First:
DVD
1
Disc > Edit > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
5
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
JAN/1 5:00AM
DISPLAY
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
1
DVD
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
Finalize
5
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Disc > Edit > Original
1
Chapter 1/1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
XP
Disc > Edit
0:01:25
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
PAUSE
STOP
REC/OTR
SETUP
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
Option window will appear.
<Add>:
Disc > Edit > Original
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
SEARCH
MODE
Disc > Edit > Original
Format
3
SLOW
VCR
PLAY
Edit
Original
CH
VIDEO/TV
0
Disc
2
OPEN/CLOSE
DEF
CLEAR/C.RESET ZOOM
Disc Protect OFF ON
AUDIO
PQRS
7
JAN/1 4:00AM
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
82
POWER
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
<Delete>:
Disc > Edit > Original
1
Chapter 2/2
Disc > Edit > Original
F
Yes
JAN/ 1 1:00AM CH12
No
1
XP
Chapter 2/2
0:01:25
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
• You cannot delete the first
chapter marker of each title.
JAN/ 1 1:00AM CH12
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
Connections
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
The chapter marker which you
selected will be deleted.
<Delete>:
CH
VIDEO/TV
SLOW
0
No
DISPLAY
DVD
VCR
PAUSE
XP
PLAY
7
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
<Add>:
Disc > Edit > Original
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
This operation may take a
few minutes to complete.
8
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
8
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
7
SKIP
ONE TOUCH
DUBBING
CM SKIP
After writing to disc is completed, press SETUP button
to exit DISC menu.
No
XP
Getting started Changing the SETUP menu
Writing to Disc
Writing to Disc
Playing discs
This operation may take a
few minutes to complete.
VR
DVD-RW
DVD
7
2
TUV
WXYZ
8
9
SPACE
VIDEO/TV
SLOW
0
DISPLAY
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
DVD
VCR
PAUSE
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
Disc > Edit
1
CLEAR/C.RESET ZOOM
Disc
Edit
Finalize
Disc Protect OFF ON
SKIP
SKIP
ONE TOUCH
DUBBING
Note :Thumbnail Picture
Original
• When you delete part of a
title, the picture you chose to
be the thumbnail for that part
is deleted. A default picture
will then be used by the unit
instead.
Instructions continue on page 84.
83
Others Español
Format
CM SKIP
Editing
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
SEARCH
MODE
1
2
Recording
You can use a picture for each title
as a thumbnail. It helps you to
remember the contents of the title
you are playing.The beginning picture
has been selected as the default.
First:
PQRS
VCR functions
Setting pictures for thumbnails
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
3
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
Disc > Edit > Original
AUDIO
DEF
SPACE
1
2
1
1
JAN/1 1:00AM
JAN/1 2:00AM
4
JAN/1 3:00AM
5
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/1 4:00AM
No
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
XP
Writing to Disc
DISPLAY
SLOW
DVD
VCR
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Disc > Edit > Original
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
5
Select “Index Picture Set”
using K / L buttons, then
press ENTER button where
you would like to capture the
thumbnail image.
Option window will appear.
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Note
• The DVD disc will begin to
play in a window.
84
This operation may take a
few minutes to complete.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
PAUSE
PLAY
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
4
CH
VIDEO/TV
0
Disc > Edit > Original
3
OPEN/CLOSE
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Title Protection
VR
4
DVD-RW
Important
1
First:
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
Edit
Format
Finalize
JAN/ 1 1:00AM CH12
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
AUDIO
DEF
SPACE
0:01:25
5
Select “Protect OFF ➔ ON”
using K / L buttons, then
press ENTER button.
Option window will appear.
DISPLAY
SLOW
DVD
VCR
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
CM SKIP
Disc > Edit > Original
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
No
XP
0:01:25
6
Select “Yes” using { / B buttons, then press ENTER button.
VCR functions
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
JAN/ 1 1:00AM CH12
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
Playing discs
2
PAUSE
PLAY
Disc Protect OFF ON
1
CH
VIDEO/TV
0
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
OPEN/CLOSE
Disc > Edit
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
No
Recording
JAN/ 1 1:00AM CH12
Original
XP
Writing to Disc
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
JAN/1 4:00AM
5
JAN/1 5:00AM
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
Protect Disc
To protect a whole disc
(DVD-RW VR mode Only):
Select “Disc Protect” from
Disc menu, then select “Yes”.
85
Others Español
4
This operation may take a
few minutes to complete.
Editing
Disc > Edit > Original
Getting started Changing the SETUP menu
1
REC SPEED
7
Disc > Edit > Original
DVD
POWER
Connections
• To prevent accidental editing or
erasing the titles, you can protect them from the original
menu.
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Releasing titles from protection
VR
DVD-RW
You are allowed to release the
titles from protection.
First:
DVD
1
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
Disc Edit > Original
2
Disc
DISPLAY
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
XP
0:01:25
Edit
“Protect ON ➔ OFF” is selected.
Finalize
Disc Protect OFF ON
5
Press ENTER button.
Option window will appear.
2
Disc Edit > Original
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
2
B
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 2:00AM CH12
No
XP
0:01:25
Disc > Edit
6
Select “Yes” using { / B buttons, then press ENTER button.
Disc Edit > Original
2
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 2:00AM CH12
No
XP
Writing to Disc
This operation may take a
few minutes to complete.
Disc > Edit > Original
SLOW
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
DVD
VCR
PAUSE
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
Original
CH
VIDEO/TV
0
JAN/ 1 2:00AM CH12
Format
OPEN/CLOSE
DEF
SPACE
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
86
POWER
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist)
Deleting titles
VR
DVD-RW
Note
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
• The disc space available for
recording will not be increased.
1
First:
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
Disc > Edit > Playlist
DVD
POWER
AUDIO
OPEN/CLOSE
Connections
In VR mode, even when a title is
deleted from a Playlist, the original
title will remain in the Original list.
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
Edit
Format
Finalize
JAN/ 1 1:00AM CH12
XP
0:01:25
5
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc Protect OFF ON
Disc > Edit > Playlist
1
Yes
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
No
XP
0:01:25
6
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
VCR functions
Disc > Edit
JAN/ 1 1:00AM CH12
STOP
REC/OTR
Playing discs
2
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
1
7
Disc > Edit > Playlist
1
Original
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
3
Recording
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
After writing to disc is completed, press SETUP button
to exit DISC menu.
Add New
Title
Delete
Playlist
JAN/1 5:00AM
87
Others Español
JAN/1 4:00AM
5
Editing
1
4
This operation may take a
few minutes to complete.
7
Disc > Edit > Playlist
Getting started Changing the SETUP menu
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting parts of titles
VR
DVD-RW
You can delete part of a title.
Even when a title is deleted from
the playlist, the original title will
remain.
Note
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
• The disc space available for
recording will not be increased.
First:
POWER
Disc > Edit > Playlist
1
DVD
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
DISPLAY
DVD
VCR
PAUSE
PLAY
1
JAN/ 1 1:00AM CH12
XP
0:01:25
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
Edit
1
5
CLEAR/C.RESET ZOOM
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit > Playlist
Disc Protect OFF ON
1
2
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
XP
0:00:55
6
Select Start-End Point.
Note
• DVD will begin to play in a window.
Press ENTER button to
decide a start point.
Then press ENTER button to
decide an end point.
Original
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
A cursor will move to “Preview”.
You can check a preview.
<Preview>
Disc > Edit > Playlist
Before
editing
Add New
Title
Delete
Playlist
JAN/1 5:00AM
Edited
88
TIMER PROG.
ENTER
MENU/LIST TOP MENU
Finalize
Disc > Edit
SETUP
REC MONITOR
Format
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
STOP
REC/OTR
Start point End point
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Part of a title will be deleted.
7
Disc > Edit > Playlist
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
1
Yes
JAN/ 1 1:00AM CH12
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
No
JAN/ 1 1:00AM CH12
0:01:25
PAUSE
PLAY
This operation may take a
few minutes to complete.
9
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
No
XP
DVD
VCR
DISPLAY
9
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
7
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
8
Note : Chapter Markers
Select “Yes” using { / B buttons, then press ENTER button.
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
VR
DVD-RW
Original/PlayList menu will appear.
Screen:
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
AUDIO
OPEN/CLOSE
Disc > Edit
7
DEF
SPACE
DVD
CH
VCR functions
You can title names on the titles
and change the names from this
menu.
The names of the titles will be
displayed on a titlelist.
First:
Playing discs
Naming Titles
Getting started Changing the SETUP menu
Yes
SLOW
XP
Writing to Disc
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
CH
VIDEO/TV
0
Disc > Edit > Playlist
1
DEF
Connections
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
[email protected]/:
1
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
Original
1
PLAY
Disc
1
3
STOP
REC/OTR
SETUP
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
Edit
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
Recording
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Format
Finalize
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
Add New
Title
Delete
Playlist
JAN/1 5:00AM
2
Select “Edit” using K / L buttons, then press ENTER button.
Instructions continue on page 90.
89
Others Español
JAN/1 4:00AM
5
Editing
Disc Protect OFF ON
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
4
7
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
Disc > Edit > Playlist
AUDIO
OPEN/CLOSE
DEF
CH
VIDEO/TV
SPACE
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Disc > Edit > Playlist > Edit Title Name
1
XP
0:01:25
No
abc
DVD
VCR
DISPLAY
ABC
abc
123
@!?
Yes
SLOW
0
PAUSE
PLAY
STOP
8
REC/OTR
SETUP
Writing to Disc
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
5
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
Disc > Edit > Playlist > Edit Title Name
1
This operation may take a
few minutes to complete.
CLEAR/C.RESET ZOOM
SEARCH
MODE
4
5
6
7
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
8
After writing to disc is completed, press SETUP to exit
DISC menu.
ABC
abc
123
@!?
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
JAN/ 1 1:00AM CH12 XP
0:01:25
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
6
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Disc > Edit > Playlist > Edit Title Name
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
area for entering title names
When you finish entering a title
name, press ENTER button.
90
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’()*
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
0
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
* Press 1 button, character set will be changed
to the " @!? " mode automatically.
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.CRESET button
to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
1
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
Add New
Title
Delete
Playlist
5
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
DEF
SPACE
JAN/1 4:00AM
JAN/1 5:00AM
4
SLOW
DVD
VCR
PAUSE
PLAY
STOP
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
1
REC/OTR
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
Edit
0:01:25
TIMER PROG.
ENTER
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
6
Finalize
Disc Protect OFF ON
5
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
VCR functions
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit > Playlist
1
Chapter 1/1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
XP
Recording
Disc > Edit
0:01:25
6
Original
Disc > Edit > Playlist
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Instructions continue
on page 90.
91
Others Español
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
Option window will appear.
<Add>:
Editing
3
Playing discs
Format
SETUP
REC MONITOR
SEARCH
MODE
Disc > Edit > Playlist
Disc
CH
VIDEO/TV
0
DISPLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
OPEN/CLOSE
Getting started Changing the SETUP menu
DVD
Disc > Edit > Playlist
Connections
You can put chapter markers in
each title. Once a chapter is
marked, you can search for them by
using the chapter search feature.
You can put a chapter marker anywhere you want.
When the number of chapter markers in the playlist comes to 999 in
total, you cannot add any more
chapter markers.
First:
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
<Delete>:
Disc > Edit > Playlist
1
Chapter 2/2
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
The chapter marker which you
selected will be deleted.
<Delete>:
1
F
Yes
JAN/ 1 1:00AM CH12
No
Chapter 2/2
XP
0:01:25
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
Yes
• You cannot delete the first
chapter of each title.
7
POWER
AUDIO
OPEN/CLOSE
Disc > Edit > Playlist
JAN/ 1 1:00AM CH12
No
DEF
SPACE
CH
VIDEO/TV
SLOW
0
XP
Writing to Disc
DVD
VCR
DISPLAY
PAUSE
PLAY
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
<Add>:
Disc > Edit > Playlist
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
Yes
JAN/ 1 1:00AM CH12
This operation may take a
few minutes to complete.
8
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
8
MENU/LIST TOP MENU
After writing to disc is completed, press SETUP button
to exit DISC menu.
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
7
SKIP
ONE TOUCH
DUBBING
CM SKIP
No
XP
Writing to Disc
This operation may take a
few minutes to complete.
Setting pictures for thumbnails
VR
DVD-RW
You can set a picture to each title
for a thumbnail. It helps you to
remember the contents of the
title you are playing.The beginning picture has been selected as
the default.
First:
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
DVD
Disc > Edit
PLAY
1
STOP
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Original
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
Disc
Edit
Format
Finalize
Disc Protect OFF ON
92
Note :Thumbnail
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
6
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
Disc > Edit > Playlist
AUDIO
DEF
SPACE
1
2
1
1
JAN/1 2:00AM
4
JAN/1 3:00AM
Add New
Title
Delete
Playlist
5
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
SLOW
DVD
VCR
No
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
XP
Writing to Disc
PLAY
7
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button where you
would like to capture the
thumbnail image.
Playlist menu will appear.
PAUSE
STOP
Yes
JAN/1 4:00AM
DISPLAY
This operation may take a
few minutes to complete.
7
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
3
4
5
6
Playing discs
After writing to disc is completed, press SETUP button
to exit DISC menu.
Disc > Edit > Playlist
1
JAN/ 1 1:00AM CH12
Getting started Changing the SETUP menu
JAN/1 1:00AM
CH
VIDEO/TV
0
Disc > Edit > Playlist
3
OPEN/CLOSE
Connections
3
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
VCR functions
0:01:25
5
Recording
Select “Index Picture Set”
using K / L buttons, then
press ENTER button where
you would like to capture the
thumbnail image.
Option window will appear.
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Editing
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Note
93
Others Español
• The DVD will begin to play in a
window.
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Adding titles to a Playlist
VR
DVD-RW
You can add or delete a title in
the playlist as you prefer.
You can add titles to a Playlist up
to 99.
First:
DVD
4
Select “Add New Title” using
K / L / { / B buttons, then
press ENTER button.
Original list will appear.
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Disc > Edit > Playlist > Add New Title
1
1
2
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
Format
Disc Protect OFF ON
JAN/12 5:00PM
JAN/12 8:00PM
1
6
58%
Writing to Disc
Disc > Edit > Playlist
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
4
JAN/1 4:00AM
JAN/1 5:00AM
JAN/12 8:00PM
Original
6
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
94
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
SETUP
After writing to disc is completed, press SETUP button
to exit DISC menu.
To delete a title from Playlist,
refer to “Deleting titles” on page
87.
To delete a Playlist, refer to
“Deleting a Playlist” on page 95.
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
SEARCH
MODE
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
STOP
REC/OTR
CLEAR/C.RESET ZOOM
Disc > Edit > Playlist > Add New Title
3
PAUSE
PLAY
JAN/10 10:30AM
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Finalize
DVD
VCR
3
5
Edit
DISPLAY
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting a Playlist
VR
DVD-RW
4
Important
First:
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
AUDIO
OPEN/CLOSE
Connections
• A Playlist can be deleted if no
longer needed.
Select “Delete Playlist” using
K / L / { / B buttons, then
press ENTER button.
Option window will appear.
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
DVD
VCR
PAUSE
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
4
JAN/1 4:00AM
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
Yes
No
1
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
Disc
5
Edit
Format
Finalize
Disc Protect OFF ON
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
SEARCH
MODE
RETURN
SKIP
CM SKIP
SKIP
ONE TOUCH
DUBBING
Select “Yes” using { / B buttons, then press ENTER button.
Playlist will be erased.
After writing to disc is completed,
the DVD/VCR will be in stop
mode.
1
2
3
4
5
Playing discs
2
TIMER PROG.
ENTER
REC MONITOR
Getting started Changing the SETUP menu
1
DISPLAY
VCR functions
Disc > Edit
Original
Recording
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 5:00AM
Add New
Title
Delete
Playlist
• If a playlist is deleted it can
not be brought back.
Note : Deleting Playlist
• Deleting a Playlist will not
increase the available recording time on disc.
95
Others Español
JAN/1 4:00AM
5
Editing
Caution
Disc > Edit > Playlist
Editing
Editing DVD-R discs
Deleting titles
DVD-R
Disc > Edit
You can delete titles which you
do not need, however the disc
space available for recording on
the disc will not be changed.
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
Important
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
You cannot select “Chapter Mark”.
DISPLAY
4
DEF
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
6
1
Title Delete
Edit Title Name
Chapter Mark
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Edit
Format
5
Finalize
Caution
• Once a title has been deleted,
it can not be brought back.
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
Disc > Edit
Yes
3
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
4
JAN/1 4:00AM
JAN/1 3:00AM
5
JAN/1 5:00AM
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
PAUSE
STOP
REC/OTR
SETUP
This operation may take a
few minutes to complete.
6
After writing to disc is completed, press SETUP button
to exit DISC menu.
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
SEARCH
MODE
Disc > Edit
Disc
JAN/1 2:00AM
SLOW
DVD
VCR
CLEAR/C.RESET ZOOM
JAN/1 1:00AM
CH
VIDEO/TV
PLAY
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
1
2
OPEN/CLOSE
0
DVD
1
AUDIO
SPACE
1
96
REC SPEED
7
0:01:25
• Be sure to know that the titles
once deleted cannot be
brought back to the disc.
First:
POWER
CM SKIP
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
1
2
3
4
5
Editing
Before you start
Editing DVD-R discs (cont’d)
Naming Titles
DVD-R
DVD
4
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
5
POWER
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
Connections
You can name titles and change
the names from this menu.
The title names will be displayed
on a titlelist.
First:
DEF
CH
VIDEO/TV
SPACE
SLOW
0
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
Disc
Format
Finalize
PAUSE
PLAY
STOP
1
7
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
5
To enter a title name, follow
Edit
DVD
VCR
DISPLAY
CLEAR/C.RESET ZOOM
SEARCH
MODE
1
2
3
4
5
6
RETURN
SKIP
SKIP
ONE TOUCH
DUBBING
CM SKIP
the steps of "Guide to edit
title name" on this page.
character set
tons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit > Edit Title Name
ABC
abc
123
@!?
1
[ Guide to edit title name ]
JAN/ 1 1:00AM CH12 XP
0:01:25
Disc > Edit
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
area for entering title names
When you finish entering a title
name, press ENTER button.
5
6
Select “Yes” using { / B but-
JAN/1 5:00AM
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Disc > Edit > Edit Title Name
1
ABC
abc
123
@!?
Yes
Disc > Edit
No
abc
1
@!?
0
<space>
0
!”#$%
&’()*
+ ,- ./ :;
<=>?
@[]^
_{|}
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
7
After writing to disc is com-
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.CRESET button
to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
pleted, press SETUP button
to exit DISC menu.
97
Others Español
You cannot select “Chapter Mark”.
123
* Press 1 button, character set will be changed
to the " @!? " mode automatically.
XP
0:01:25
abc
<space>
Writing to Disc
This operation may take a
few minutes to complete.
JAN/ 1 1:00AM CH12
ABC
<space>
Editing
Title Delete
Edit Title Name
Chapter Mark
Select
Press
Recording
3
Select a desired title using K /
tons, then press ENTER button.
123
@!?
[Step2]: Press Number buttons following by the list
below.
VCR functions
1
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
Playing discs
2
Select “Edit” using K / L but-
Getting started Changing the SETUP menu
1
Press SETUP button. Select
Disc > Edit > Edit Title Name
Others
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple corrections may eliminate the problem and restore proper operation.
Symptom
Power
The power does not turn on.
Remedy
• Check that the AC power cord is connected securely.
Picture
There is no picture.
• Re-connect the connecting cord securely.
• The Setup Display appears. Press SETUP or RETURN
button to turn off the display.
• Check the connection to your TV (page 10).
• Check the RF output channel when you view a TV program
using RF connection.
• Check if the INTERLACE/PROGRESSIVE mode is set correctly
according to your TV. See page 10.
• Switch the input selector on your TV (such as to "LINE1") so
that the signal from this DVD/VCR appears on the TV screen.
• Check the antenna/cable wire connections.
Picture noise appears.
• The disc is dirty or flawed.
• Head cleaning for VCR may be necessary.
Refer to “AUTO HEAD CLEANING”.
• If the picture output signal from the unit passes through your VCR
to get to your TV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try
connecting the unit to your TV's S-VIDEO input.
• Adjust tracking control for better picture by pressing
CHANNEL (o / p) buttons on this unit or CH ( o / p)
buttons while you are playing a video tape.
• Check the antenna/cable wire connections.
• Try to set the channels with "Auto Preset" in SETUP menu
(page 16).
• Select a channel of any TV program using the CH o / p buttons.
• Press VIDEO/TV button if necessary.
• Check the antenna/cable wire connections.
TV station does not appear
TV program pictures are distorted.
TV channels cannot be changed.
• Adjust TV antenna.
• Adjust the picture (see the TV's instruction manual).
• Place the unit and TV farther apart.
• Place the TV and any bunched antenna cables farther apart.
• Switch the input to TV.
• Connect the antenna cable correctly (page 10).
The playback picture or TV program from
the equipment connected through the
unit is distorted.
• If the playback picture output from a DVD player,VCR, or tuner
goes through the unit before reaching your TV, the copyprotection signal applied to some programs could affect picture
quality. Disconnect the playback equipment in question and
connect it directly to your TV.
• Check the antenna/cable wire connections.
There is no sound.
• The disc is dirty or flawed.
• Re-connect all connections securely.
• The connecting cord is damaged.
• Check the connections to the amplifier input.
• The input source setting on the amplifier is incorrect.
• The unit is in pause mode or in Slow-motion Play mode.
• The unit is in fast forward or fast reverse mode.
• If the audio signal does not come through the DIGITAL AUDIO
OUT (COAXIAL) jack, check the Audio Setup settings (pages
30-31).
• The disc is dirty or flawed.
Sound
Sound is noisy.
98
Others
Symptom
Playback
The disc does not play.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
The language for the sound track cannot
be changed.
• Multilingual subtitle are not recorded on the DVD VIDEO.
• The DVD VIDEO prohibits changing of the subtitles.
• Try changing the subtitle using the DVD VIDEO's menu.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD VIDEO being played.
• You are trying to change the angles when
icon does not
appear on the TV screen (page 49).
• The DVD VIDEO prohibits changing angles.
• Try changing the angle using the DVD VIDEO's menu.
Recording/Timer recording/Editing
The channel cannot be changed from the
channel you are recording.
Recording does not start immediately
after you press REC/OTR button.
• Set the TV's input to "TV".
Recording does not stop immediately
after you press STOP C button.
• It will take a few seconds for the unit to input disc data before
recording can stop.
Timer recording is not complete or did
not start from the beginning.
• The timer setting overlapped with another setting that was set
later or has priority (page 66).
• Disc space was not enough.
• Make sure indicator appears on the front display of this unit. If not,
press POWER button.
• Clock has not been set.
Timer recording is impossible.
99
Others Español
•There was a power failure during recording.
• The units internal clock stopped due to a power failure that
lasted for more than 30 seconds.
Reset the clock (pages 19-20).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that was set
later or has priority.
Editing
Nothing was recorded even though you
set the timer setting correctly.
Recording
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the unit to automatically format a DVD-RW.
• Make sure the tape has a safety tab when you record to a
cassette tape. If needed, cover the hole with cellophane tape.
VCR functions
The subtitle language cannot be changed
or turned off.
Playing discs
• Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the disc.
• Multilingual tracks are not recorded on the DVD VIDEO,
DVD-R or DVD-RW being played.
• The DVD VIDEO prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD VIDEO's menu.
Getting started Changing the SETUP menu
The unit starts playing from the disc
automatically.
• No disc is inserted.
• A blank disc is inserted.
• No cassette tape is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-ROM) (page 34).
• The region code on the DVD VIDEO does not match the unit
(page 34).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on at least for 2 hours until the moisture
evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot
play the disc if it was not finalized (page 71).
• Resume play was activated (page 39). Press STOP C button
twice.
• You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
• The DVD VIDEO features an auto playback function.
Connections
The disc does not start playback from the
beginning.
Remedy
Before you start
Troubleshooting (cont’d)
Others
Troubleshooting (cont’d)
Symptom
Remedy
Remote control
The remote control does not function.
• Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Turn on the unit.
• The remote control is not pointed at the remote sensor on the
unit.
• Press the DVD or VCR button, whichever you need. Then, try
again.
Others
The unit does not operate properly.
• When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
The disc tray does not open when you
press OPEN/CLOSE A button.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
"Repairing" appears on the display.
•If there is a power failure or unplugging during recording,
finalizing, formatting or editing, a Repairing process will begin
automatically just after turning the unit on again.
It may take several minutes up to about four hours.
Repairing
Error message
Solution
Disc Error
--- Please eject the disc. --Playback feature may not be
available on this Disc.
Unplayable disc is inserted
in the unit.
Insert the standardized disc which
bear the marks on page 34.
Region Error
--- Please eject the disc. --Playback is not authorized in your
region.
Playback is not authorized
because the region code of the
DVD video disc you inserted is
different.
Insert the DVD-Video disc with
region codes 1 or ALL.
Parental Lock On
--- Please eject the disc. --The current selected parental level
Prohibits playback.
The current selected parental
level in the SETUP Menu
prohibits playback.
Check the "Parental Lock" setting
(pages 32-33).
The recording function encountered
the copy prohibited program.
You cannot record copy prohibited
programs.
Recording Error
This program is not
recordable in Video mode.
You are trying to record copyonce
program onto the DVD-RW disc
in Video mode or the DVD disc.
Set "DVD-RW Recording Format"
to "VR mode" (page 58).
Recording Error
You are trying to record onto disc
which is unrecordable, or the
disc status prevents recording.
Insert the recordable disc, and
ensure the disc status satisfies the
recording requirements
(pages 56-72).
You are trying to record the copyonce program onto a DVD-RW
disc which is not compatible with
CPRM.
Insert a ver. 1.1 CPRM compatible
DVD-RW disc (page 57).
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Release the disc protect setting
in the Disc Setting menu (page 72).
Recording Error
This program is not allowed
to be recorded.
Can not record on this disc.
Recording Error
This program is not allowed to
be recorded on this disc.
Recording Error
This disc is protected and not
recordable.
100
Cause
Others
Before you start
Troubleshooting (cont’d)
Error message
Recording Error
Disc is full.
Cause
Solution
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (99).
Delete unnecessary titles
(page 78).
Recording Error
You cannot record more the
999 chapters on one disc.
(The maximum is 999)
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (999).
Delete unnecessary chapter
markers (pages 82-83).
This disc has no space to write
the Control Information when
recording or deleting contents.
Delete unnecessary titles
(page 78).
Recording Error
You cannot record on this disc
as Control Information is full.
Getting started Changing the SETUP menu
Recording Error
You cannot record more
than 99 titles on one disc.
(The maximum is 99)
Connections
Insert the recordable disc with
enough recording space.
(No area for new recording)
You are trying to record onto
the disc which has no space
for recording.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
Recording Error
This disc is already finalized.
This disc's working area for
recording is full.
Insert a new disc.
When recordings are performed
repeatedly onto an unstable disc,
this area may fill up.
You are trying to record onto
the disc already finalized.
Playing discs
Recording Error
You cannot record on the
disc as Power Calibration
Area is full.
Release the finalizing for this disc
(page 71).
VCR functions
* If you are still experiencing trouble after reviewing the Troubleshooting guide, please refer to the warranty statement page at the rear of this manual.
Recording
Editing
Others Español
101
Others
Glossary
Analog audio
An electrical signal that directly
represents sound. Compare this
to digital audio which can be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio
The width of a TV screen relative
to its height. Conventional TVs are
4:3 (in other words, the screen is
almost square); widescreen models
are 16:9 (the screen is almost
twice as wide as it is high).
Chapter
Just as a book is split up into several chapters, a title on a DVD
disc is usually divided into chapters. See also Title.
Component video output
Each signal of luminance(Y) and
component(PB/CB, PR/CR) is independent to output so that you can
experience picture color as it is.
Also, due to compatibility with
progressive video (480p), you can
experience higher-density picture
than that in interlace (480i).
CPRM
(Content Protection for
Recordable Media)
CPRM is a copy protection system with scramble system regarding the recording of “copy-once”
broadcast programs (e.g. some
satellite broadcasts).
Digital audio
An indirect representation of
sound by numbers. During recording, the sound is measured at discrete intervals (44, 100 times a
second for CD audio) by an analog-to-digital converter, generating
a stream of numbers. On playback,
a digital-to-analog converter generates an analog signal based on
these numbers. See also Sampling
frequency and Analog audio.
102
Dolby Digital
The system to compress digital
sound developed by Dolby
Laboratories. It offers you sound
of stereo(2ch) or multi-channel
audio (up to 5.1ch).
DTS (Digital Theater System)
DTS is a 5.1 channel surround
sound system, but it is different
from Dolby Digital.The formats
were developed by Digital Theater
System, Inc.
MP3 (MPEG Audio Layer 3)
MP3 is a method of compressing
files.You can copy MP3 files on
CD-R/RW discs from the computer and play the files on this unit.
Finalize
To make DVD discs, which have
been recorded on, possible to play
in DVD players.With this unit, it is
possible to finalize DVD-R/DVDRW discs.
PCM•2-channel stereo
(Pulse Code Modulation)
The most common system of
encoding digital audio, found on
CDs and DAT. Excellent quality,
but requires a lot of data compared to formats such as Dolby
Digital and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and
AV amplifiers with digital inputs,
this unit can convert Dolby Digital
and MPEG audio to PCM. See also
Digital audio.
Playlist
From this list you can play contents of a disc as your desired
order or in sequence. Also it is
allowed to search a specific scene
directly.
Progressive Scan (480p)
A type of display that does not
split each frame into fields, and
instead scans directly through all
the scanlines of each frame in
order. Progressive Scan provides
less flickering and higher image
resolution than traditional (480i)
TV signals. Refer to page 13 for
instructions on selective
Progressive Scan mode.
Regions code
Regions associate discs and players with particular areas of the
world.This unit will only play discs
that have compatible region
codes.You can find the region
code of your unit by looking on
the rear panel. Some discs are
compatible with more than one
region (or all regions).
Sampling frequency
The rate which sound is measured
by a specified interval to turn into
digital audio data.The numbers of
sampling in one second defines as
sampling frequency.The higher the
rate, the better the sound quality is.
SAP
(Secondary Audio Program)
Second Audio channel which is
delivered separately from mainaudio channel.This audio channel
is used as an alternate in bilingual
broadcasting.
S-Video output
It delivers independently each signal of color(C) and luminance(Y)
to TV as video signals, so that
higher-quality picture will be
gained.
Title (DVD only)
A collection of chapters on DVD
disc. See also chapter.
Track
Audio CDs use tracks to divide
up the content of a disc.The DVD
equivalent is called a chapter. See
also Chapter.
Others
Before you start
Specifications
General
Getting started Changing the SETUP menu
VCR video heads
Power requirements
Power consumption
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
Connections
DVD-Video, DVD-R/RW, Audio CD, CD-R/RW,
Video Cassette Tape
Four heads
AC120 V, 60 Hz
37 W (standby: 4.3 W)
9.5 lbs ( 4.3 kg )
17 1/8" x 3 7/8" x 10 1/4" (435 x 99.5 x 261 mm)
41Fº to 104Fº (5ºC to 40ºC)
5% to 85% (no condensation)
NTSC
System
Tuner
Receivable channels
VHF
UHF
CATV
RF Converter
Converter output
2-13ch
14-69ch
C1-C125ch
Built-in VHF converter
VHF channel 3 or 4
Note:
The specifications and design of this product are subject to change without notice.
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
103
Others Español
Code
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6247
6265
5247
6258
6266
6367
6459
6461
Editing
Language
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Recording
Code
6159
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
VCR functions
Language
(Afan) Oromo
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Playing discs
Language code
Español
Fácil grabación de DVD
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.
Nota:
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.
Paso 1: Elija un tipo de
disco
Paso 2:Coloque
un disco
en blanco
Hay varias tipos de discos DVD
grabables a su elección. Elija un tipo de
disco DVD que se pueda grabar según
sus necesidades de reproducción/
grabación/edición. Elija el tipo según
"Tipos de disco DVD" en esta página.
Este grabador de DVD puede
grabar en los siguientes tipos de
disco.
1
2
3
Para encender
Para abrir
Para cerrar
Mando a distancia
1
(o)
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
OPEN/CLOSE
2
C
* Esta unidad no puede grabar en los
discos siguientes.
• DVD-R General Ver 2.0 / 8x
• DVD-RW Ver 1.2 / 2-4x compatible
con CPRM
Por ejemplo, cuando desea grabar
repetidamente en el mismo disco o
cuando desea editar el disco
después de grabar, seleccione el
disco de tipo regrabable DVD-RW.
Cuando desea guardar
grabaciones sin alterarlos, un DVD
no regrabable DVD-R puede ser
más conveniente.
: Puede utilizar
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
OPEN/CLOSE
3
REC SPEED
[email protected]/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
AUDIO
OPEN/CLOSE
DEF
CH
VIDEO/TV
1
SLOW
DVD
VCR
PAUSE
PLAY
STOP
SP 2:01 Rem.
Esta operación
puede demorar en
reconocerse.
DVD-RW VR
: No puede utilizar
DVD-RW Video
DVD-R
DVD-RW Video
DVD-R
No
Editar/grabar de equipos conectados
Copiar discos para distribución
*1
Reproducir en otro equipo de DVD
*1
DVD-RW VR
Grabación
¿Regrabable?
Sí
Sí
Puede crear capítulos a intervalos fijos (auto.)
Sí
Sí
Sí
Puede crear capítulos donde desee (manual)
Sí
No
No
Puede grabar imágenes de tamaño 16:9
Sí
Sí
Sí
Puede grabar un programa de Copia-una-vez
Sí
No
No
Edición
104
2
POWER
Loading
Editar las grabaciones
Puede hacer funciones de edición básica
Sí
Sí
No
Puede hacer funciones de edición avanzadas (edición de lista a reproducir)
Sí
No
No
El DVD-RW (modo VR) sólo puede
reproducirse en equipos de DVD
compatibles con VR.
Para seleccionar la
velocidad de grabación
0
Volver a utilizar borrando partes no deseadas
*1
2
DISPLAY
Grabar programas de TV
Detalles
Para seleccionar el
modo DVD
SPACE
: Algunas funciones son limitadas
Desea
1
7
Tipos de disco DVD
: Más adecuado
Paso 3:Seleccione la
velocidad de
grabación
Nota:
Para más detalles sobre las funciones anteriores y las
limitaciones implícitas, lea las explicaciones en este manual.
Importante
Formato del disco
Coloque el disco en el
grabador. Haga el formato del
disco del menú SETUP, existen
los formatos de video (modo
de Video) o de grabación de
video (modo VR) según el tipo
de disco colocado.
Esto es necesario para
preparar el disco para
grabación.Vea los detalles
en las páginas 58-60.
* Al formatear, todo el
contenido de ese disco se
borrarán.
Español
Before you start
Fácil grabación de DVD (cont.)
Paso 4: Seleccione
el canal
deseado
Paso 5: Presione
el bóton
REC/OTR
Paso 6: Pare la
grabación
SPACE
SLOW
0
VCR
DISPLAY
JKL
5
6
TUV
WXYZ
8
9
7
CH
MNO
4
VIDEO/TV
PLAY
SPACE
SLOW
STOP
0
DISPLAY
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
VCR
PAUSE
Connections
GHI
PQRS
DVD
DVD
REC/OTR
PAUSE
OPEN/CLOSE
SETUP
REC MONITOR
TIMER PROG.
ENTER
PLAY
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
RETURN
REC/OTR
VIDEO/TV
SETUP
REC MONITOR
SLOW
TIMER PROG.
58%
ENTER
MENU/LIST TOP MENU
Writing to Disc
RETURN
0
DISPLAY
VCR
DVD
PAUSE
CH 1
Esta operación puede
demorar en completarse.
I
Sugerencia 1: Reproduzca el contenido grabado
Inicio de grab.
Título 1
Parada/inicio
Parada grab.
Playing discs
Puede seleccionar el título que desea reproducir de un menú indicado y empiece a reproducir inmediatamente. Las grabaciones pueden
verse fácilmente en un disco, el procedimiento es simple ya que sólo
tiene que elegir el título en un capítulo de la pantalla del menú.
Título 2
¿Qué son títulos y capítulos?
La grabaciones del disco DVD se dividen generalmente en títulos.
Los títulos pueden subdividirse en capítulos.
Getting started Changing the SETUP menu
GHI
MENU/LIST TOP MENU
STOP
CH
Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2
La edición de discos puede ser muy fácil y el grabador de DVD ofrece convenientes funciones de edición
posibles sólo con los DVD-R/RW.
Puede editar lo siguiente de la lista de títulos.
• Poniendo nombres en títulos
• Seleccionando imágenes para índices (modo VR)
• Seleccionando/borrando marcadores de capítulos
• Borrado de partes de títulos o escenas (Modo VR)
Original y Playlist (modo VR)
Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones originales. Cualquier lista a
reproducir no ocupa mucho espacio en el disco.
Recording
Title Delete: Esto borra permanentemente una escena completa del disco.
Scene Delete: Esto permite que el usuario edite dentro de una escena específica (anuncios comerciales, por ejemplo).
VCR functions
Sugerencia 2: Edite el disco grabado
¿Qué significa "Original" o "Playlist"?
Editing
A lo largo de este manual encontrará Original y Playlist que se refieren a las grabaciones reales y la versión editada.
• La grabación Original se refiere a la grabación real en el disco.
• El Playlist se refiere a la versión editada del disco; cómo se va a reproducir la versión Original.
Finalización de un disco
105
Others Español
• Esto permitirá que un disco que se grabe en nuestra unidad pueda ser reproducido en un reproductor
DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor.
• Después de finalizar un disco, si la grabación se hizo en el modo de vídeo, usted no podrá editar ninguna
información que se encuentre en ese disco.
• Si ha grabado en el modo VR en un disco DVD-RW, la edición podrá realizarse incluso después de la finalización.
Español
Reproducción con videograbadora
VCR
3
1
Presione el botón POWER en
el mando a distancia o el
panel frontal de la unidad.
Cuando reproduzca una cinta,
conecte el TV y asegúrese de
seleccionar la entrada donde se
conecta la unidad.
Presione:
VCR
2
Coloque una cinta pregrabada y presione el botón PLAY
B para empezar la reproducción.
Durante la reproducción, presione el botón PAUSE F.
Se hará una pausa de reproducción y se silenciará el sonido.
POWER
REC SPEED
AUDIO
[email protected]/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
4
Presione el botón PLAY B
para continuar la reproducción.
DISPLAY
2
4
DVD
VCR
PAUSE
3
PLAY
STOP
REC/OTR
REC MONITOR
SETUP
TIMER PROG.
5
ENTER
5
Presione el botón STOP C
para detener la reproducción.
6
Presione el botón
STOP/EJECT C A en el panel
frontal de la unidad para
expulsar la cinta.
106
1
Nota
• Cuando se coloca una cinta
sin la lengüeta de grabación, la
unidad empezará a reproducir
automáticamente.
• El seguimiento se ajustará
automáticamente para la
reproducción. Para ajustar
manualmente el seguimiento,
presione los botones CHANNEL K/L en el panel frontal
de la unidad o los botones
CHK/CHL en el mando a
distancia.
Español
Grabación
PQRS
Primero:
VCR
7
VCR
TUV
WXYZ
8
9
SPACE
VIDEO/TV
SLOW
0
Tiempo de
grabación/reproducción
T60
T120
T160
1 hora
2 horas 2-2/3 horas
3 horas
6 horas
8 horas
• Se selecciona Estéreo o SAP.
DVD
PAUSE
1
Presione el botón REC/OTR
para empezar la grabación.
Para detener temporalmente la
grabación o continuarla, presione
el botón PAUSE F. Después de
que la unidad haya estado en el
modo de pausa durante 5 minutos, se detendrá automáticamente
para proteger al cinta y el cabezal
de video contra cambios.
2
Presione el botón STOP
cuando se complete la
grabación.
Prevención contra borrado accidental
Lengüeta de
grabación
PLAY
STOP
1
REC/OTR
SETUP
TIMER PROG.
2
ENTER
REC MONITOR
Nota
• Para ver un canal mientras
graba en otro
1) Mientras está grabando en
la unidad, presione el botón
VIDEO/TV.
2) En la caja de cable o caja
de satélite, seleccione el canal
que desea ver.
Si se conectó la unidad a una
caja de cable o caja de satélite,
consulte la sección de
"Connection to a cable box or
satellite box" en la página 11.
• Si se termina el OTR en la
videograbadora durante el
modo de reproducción o REC
en DVD, la videograbadora
estará en el modo STOP y la
DVD se mantiene en el modo
actual.
VCR functions
Grabación con temporizador de un toque
GHI
VCR
VCR
1
(0:30)
6
WXYZ
8
9
7
(1:00)
SPACE
CH
VIDEO/TV
SLOW
0
(8:00)
(7:30)
Cuando termina la grabación con
temporizador de un toque, la
unidad se desconectará automáticamente.
DISPLAY
VCR
DVD
PLAY
STOP
1
REC/OTR
SETUP
REC MONITOR
MENU/LIST TOP MENU
Para cancelar la grabación con
temporizador de un toque dentro
del tiempo especificado, presione
el botón STOP C.
PAUSE
TIMER PROG.
1
ENTER
RETURN
Nota
107
Others Español
• Aparecerá el tiempo de
grabación restante en el panel
de visualización durante una
OTR. Presione el botón DISPLAY para que aparezcalo en
la pantalla del televisor.
• No puede pausar una OTR.
Editing
Durante la grabación normal,
presione el botón REC/OTR
para empezar la grabación
con temporizador de un
toque.
Puede seleccionar un tiempo de
grabación determinado presionando repetidamente el botón
REC/OTR.
(Canal a grabar)
MNO
5
TUV
Recording
Esta función permite seleccionar
la longitud de la grabación simplemente presionando el botón
REC/OTR en el mando a distancia
o en el panel frontal de la unidad.
Primero:
JKL
4
PQRS
Playing discs
Para evitar una grabación por
accidente en un casete grabado,
rompa la lengüeta de grabación.
Para volver a grabar posteriormente, cubra el orificio con
cinta adhesiva.
1
Getting started Changing the SETUP menu
Velocidad
de la cinta
Tipo de cinta
Modo SP
Modo SLP
VCR
Connections
Antes de grabar, asegúrese de que:
• Se seleccionó el canal deseado
presionando los botones numéricos en el mando a distancia o
botones CHANNEL K/L en el
panel frontal de la unidad.
• Hay una cinta con la lengüeta
para grabación intacta en la
unidad.
• Se seleccionó la velocidad de
grabación deseada en SP (reproducción estándar) o SLP (reproducción de super larga duración)
presionando el botón REC
SPEED en el mando a distancia.
Velocidad de grabación:
DISPLAY
Before you start
Grabación y grabación con temporizador de un toque (VCR)
Get it fixed, at your home or ours!
Your Home
For repair- in your home -of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME R
(1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com
www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Center.
1-800-488-1222
Call anytime, day or night (U.S.A. only)
www.sears.com
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655 (U.S.A.)
1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
Au Canada pour service en français:
1-888-SU-HOGARSM
(1-800-533-6937)
www.sears.ca
1-800-LE-FOYERMC
(1-888-784-6427)
R
R
Registered Trademark / TM Trademark / SM Service Mark of Sears, Roebuck and Co.
Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears, Roebuck and Co.
Marque de commerce / MD Marque déposée de Sears, Roebuck and Co.
MC
© Sears, Roebuck and Co.
90 Day Full Warranty
If this (product) experiences any failure due to a defect in material or workmanship within 90 days from the date
of purchase, return it to your nearest Sears Parts & Repair Center, and Sears will repair it free of charge.
After 90 days and until one (1) year from the date of purchase, Sears will replace defective parts free of charge.
You pay for labor.
This warranty applies only if this (product) is used for private household purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
For the location of a Sears Service Center in your area : 1-800-488-1222
Printed in China
1VMN20233 / E9413UD ★★★★★
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement