Image Home Gym IMEX35080 User manual

Add to my manuals
16 Pages

advertisement

Image Home Gym IMEX35080 User manual | Manualzz
¨
Model No. IMEX35080
Serial No.
USERÕS MANUAL
Write the serial number in the
space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfaction through direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our customer hot line
will provide immediate assistance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
Patent Pending
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website at
www.imagefitness.com
new products, prizes,
fitness tips, and much more!
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the exercise cycle.
10. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended
only as an exercise aid in determining heart
rate trends in general.
1. Read all instructions in this manual before
using the exercise cycle. Use the exercise
cycle only as described in this manual.
2. It is the responsibility of the owner to
ensure that all users of the exercise cycle
are adequately informed of all precautions.
11. The exercise cycle is intended for in-home
use only. Do not use the exercise cycle in a
commercial, rental, or institutional setting.
3. Use the exercise cycle indoors on a level
surface. Keep the exercise cycle away from
moisture and dust. Place a mat under the
exercise cycle to protect the floor or carpet.
12. CAUTION DECAL: The decal shown below
has been placed on the exercise cycle. If
the decal is missing, or if it is not legible,
please call our Customer Service
Department toll-free at 1-800-999-3756 to
order a free replacement decal. Apply the
decal in the location shown.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
5. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
6. The exercise cycle should not be used by
persons weighing more than 250 pounds.
7. Wear appropriate clothing and athletic
shoes when exercising; do not wear loose
clothing that could become caught on the
exercise cycle.
8. Always keep your back straight when using
the exercise cycle. Do not arch your back.
Note: Decal is shown
at 75% of actual size
9. If you feel pain or dizziness while exercising, stop immediately and cool down.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
2
BEFORE YOU BEGIN
Congratulations for selecting the new IMAGE¨ 3.2C
exercise cycle. Cycling is one of the most effective
exercises for increasing cardiovascular fitness, building
endurance, and toning the entire body. The IMAGE¨
3.2C offers an impressive array of features designed
to let you enjoy this healthful exercise in the comfort
and privacy of your home.
Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
mention the product model number and serial number
when calling. The model number is IMEX35080. The
serial number can be found on a decal attached to
the IMAGE¨ 3.2C (see the front cover of this manual).
For your benefit, read this manual carefully before
you use the IMAGE¨ 3.2C. If you have additional
questions, please call our Customer Service
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Book Holder
Pulse Sensor
Handlebar
Console
Upper Side Shield
Seat
Seat Post
FRONT
Seat Knob
BACK
Side Shield
Pedal Strap
Pedal
RIGHT SIDE
Rear Stabilizer
3
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
.
PART CHART
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-assembled.
Console Screw (20)Ð4
M8 Black Flat Washer (57)Ð16
M8 x 15mm Button Screw (7)Ð4
Monitor Screw (17)Ð4
M6 x 15mm Hex Screw (29)Ð4
M8 x 20mm Button Screw (25)Ð4
#8 x 19mm Screw (11)Ð3
M8 x 55mm Button Screw (63)Ð4
4
1. Attach the Rear Stabilizer (3) to the Frame (1) with
four M8 x 55mm Button Screws (63) and four M8
Black Flat Washers (57).
1
1
3
57
63
2. Attach the Seat (12) to the Seat Post (13) with four
M6 x 15mm Hex Screws (29) and four M8 Black Flat
Washers (57).
2
12
13
57
29
3. Turn the Seat Knob (8) counterclockwise one complete turn. Next, pull back the Seat Knob and insert
the Seat Post (13) into the Frame (1). Slide the Seat
Post up or down to the desired height and release
the Seat Knob. Make sure that the Seat Knob
snaps into one of the holes in the Seat Post. Turn
the Seat Knob clockwise to retighten it.
3
26
13
Press the Seat Post Bushing (26) down onto the top
of the Frame (1).
1
8
4. The Console (2) requires two ÒAAÓ batteries (not
included); alkaline batteries are recommended. Turn
the Console over and press two batteries into the
battery holder (see the inset drawing). Make sure
that the negative (Ð) ends of the batteries are
touching the springs in the battery holder.
Hold the Console (2) near the Console Base (9).
Insert the two pulse wires and the wire harness
through the slot in the center of the Console Base.
Attach the Console to the Console Base with the four
Monitor Screws (17). Be careful not to pinch the
wires.
5
4
2
9
Pulse
Wires
Battery Holder
Wire
Harness
17
5. Hold the Console Base (9) near the Handlebar (16).
Insert the wire harness through the indicated hole in
the handlebar. Next, connect the two pulse wires to
the two Wires (22) extending from the Handlebar.
5
9
Attach the Console Base (9) to the Handlebar (16)
with four Console Screws (20). Be careful to avoid
pinching the wires.
Wire
Harness
22
Hole
Pulse
Wires
20
6. Hold the Handlebar (16) near the Handlebar Post (6).
Connect the wire harness to the Extension Wire (18).
16
6
Attach the Handlebar (16) to the Handlebar Post (6)
with four M6 x 20mm Button Screws (25) and four
M8 Black Flat Washers (57).
Wire
Harness
16
18
57
6
25
7. While another person holds the Handlebar Post (6)
near the Frame (1), connect the Extension Wire
(18) to the Lower Wire Harness (44).
7
Next, slide the Handlebar Post (6) onto the Frame
(1). Attach the Handlebar Post with four M8 x 15mm
Button Screws (7) and four M8 Black Flat Washers
(57).
6
1
6
18
57
44
7
8. Position the Upper Side Shields (61, 62) around the
Handlebar Post (6) as shown. Make sure that the
plastic posts shown in the inset drawing are inserted
into the upper holes in the Side Shields (4, 5).
Attach the Upper Side Shields with three #8 x
19mm Screws (11).
8
6
61
62
11
5
Holes
4
Posts
9. Identify the Left Pedal (40) and the Left Pedal Strap
(41); there is an ÒLÓ on each part for identification.
9
Find the end of the Left Pedal Strap (41) that has
four holes in it. Slide that end of the Pedal Strap
onto the outer tab on the Left Pedal (40). Slide the
other end of the Pedal Strap onto the inner tab on
the Left Pedal. Note: The holes are for adjustment.
34
41
Using an adjustable wrench, tighten the Left Pedal
(40) counterclockwise into the left Crank Arm (34).
Four
Holes
Next, attach the Right Pedal Strap to the Right
Pedal, and tighten the Right Pedal clockwise into
the right Crank Arm (not shown).
Outer
Tab
40
10. Make sure that all parts are tightened before you use the exercise cycle. Place a mat beneath the
exercise cycle to protect the floor.
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE POSITION OF THE SEAT
seat post up or down to the desired height and
release the seat knob. Make sure that the seat knob
snaps into one of the holes in the seat post. Turn
the seat knob clockwise to retighten it.
For effective exercise, the seat
should be at the
proper height. As
you pedal, there
Seat
should be a slight
bend in your knees
Seat Post
when the pedals
are in the lowest
Frame
position. To adjust
the seat, first turn
Seat Knob
the seat knob
counterclockwise
one complete turn.
Next, pull the seat
knob and insert the seat post into the frame. Slide the
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal
straps, first pull the
straps off the tabs
on the pedals.
Press the straps
back onto the tabs
using different
holes in the straps.
Strap
Tab
7
DESCRIPTION OF THE CONSOLE
HOW TO USE THE MANUAL PROGRAM
1
Turn on the power
To turn on the power, press any button on the
console or simply begin pedaling. Note: If batteries
were just installed, the power will already be on.
2
Select the manual program
Each time the power
is turned on, the
manual program will
automatically be
selected, as shown
by the ÒP-1Ó in the
display. (P-1 is the manual program.) If you have
selected a different program, select the manual
mode again by pressing the program button
repeatedly until the ÒP-1Ó reappears.
3
If there is a thin sheet of clear plastic
on the face of the console, remove it.
Begin pedaling and adjust the resistance of
the pedals as desired
As you exercise, press the resistance + and Ð
buttons to adjust the resistance of the pedals.
Note: After the buttons are pressed, it may take a
moment for the selected resistance setting to be
reached.
The innovative console offers an impressive array of
features to help you get the most from your workouts.
When the manual program is selected, you can adjust
the resistance of the pedals with a touch of a button.
As you exercise, the console will display your pedaling
speed, the number of Calories you have burned, the
elapsed time, and your total distance. You can even
measure your heart rate using the built-in pulse sensor.
4
Follow your progress with the console display
As you exercise, the
Matrix
matrix on the left
side of the display
will show your
progress. During the
first minute that you
exercise, the first column of the matrix will flash;
during the second minute, the second column will
flash; during the third minute, the third column will
flash, and so on, until the tenth column is flashing. After you have exercised for ten minutes, the
matrix will reset and the first column will begin to
flash again.
The console also offers ten preset workout programs.
Five programs automatically change the resistance of
the pedals as they guide you through effective workouts, and five programs automatically adjust the resistance of the pedals to keep your heart rate near preselected levels during your workouts.
Note: Before the console can be operated, two ÒAAÓ
batteries must be installed. See assembly step 4 on
page 6 for instructions.
The matrix will also show the resistance level of
the pedals. As you press the resistance + or Ð
button, the height of the columns in the matrix will
increase or decrease.
8
In addition to the matrix, the display will show
your pedaling speed, the number of Calories you
have burned, the elapsed time, and your total
distance. The display will also show your heart
rate when the pulse sensor is used (see step 5).
Note: If your heart rate is not shown, press the
reset button to reset the pulse sensor.
5
HOW TO USE A RESISTANCE PROGRAM
1
To turn on the power, press any button on the
console. Note: If batteries were just installed, the
power will already be on.
Measure your heart rate if desired
To use the pulse sensor, place your hands
on the metal contacts. Your palms
must be resting on
the upper contacts
and your fingers
must be touching the
lower contacts. Avoid
moving your hands.
2
Select one of the resistance programs
Each time the power
is turned on, the manual program will be
selected, as shown by
the ÒP-1Ó in the display. To select one of
the resistance programs, press the program button
repeatedly until a ÒP-2,Ó ÒP-3,Ó ÒP-4,Ó ÒP-5Ó or ÒP-6Ó
appears in the display.
Metal
Contacts
As you select each
Matrix
resistance program,
the matrix will show
the resistance settings
of the program you
have selected. If you
select program 2, for example, the matrix will
show that the resistance will gradually increase
during the first half of the program and then gradually decrease during the last half of the program.
Note: Before you can use the pulse sensor,
you must peel the protective vinyl covering
off the metal contacts on the top and bottom
of the pulse sensor.
After a moment, the
heart-shaped indicator in the display will
begin to flash and
your heart rate will
be shown. For the
most accurate heart rate reading, continue to hold
the contacts for about 15 seconds. WARNING:
The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
3
Begin pedaling and follow your progress with
the console display
As you exercise, follow your progress with the
matrix on the left side of the display (refer to the
drawing above). During the first minute of the program, the first column of the matrix will flash; during the second minute, the second column will
flash; during the third minute, the third column will
flash. In addition, the resistance of the pedals will
automatically change according to the height of
the flashing columnÑthe higher the column is,
the greater the resistance will be. After ten minutes, the program will be completed.
Note: If your heart rate is not shown, press the
reset button to reset the pulse sensor. In addition, make sure that your hands are positioned as
described above. Be careful not to move your
hands excessively or squeeze the metal contacts
too tightly.
6
Turn on the power
Note: If the program is too easy or too difficult,
press the resistance + or Ð button to adjust the
intensity level of the program. As you press the
resistance + or Ð button, the height of the
columns in the matrix will increase or decrease.
When you are finished exercising, turn off the
power
To turn off the power, simply wait for about
three minutes. If the pedals are not moved and
the console buttons are not pressed for three
minutes, the power will turn off automatically.
In addition to the matrix, the display will show
your pedaling speed, the number of Calories you
have burned, the elapsed time, and your total
distance. The display will also show your heart
rate when the pulse sensor is used (see step 4).
9
4
ters ÒAGEÓ and the current age setting will appear
at the bottom of the display. Press the resistance
+ or Ð button to enter your age. After you have
entered your age, the display will change back to
the main display in about five seconds.
Measure your heart rate if desired
Refer to step 5 on page 9. Note: If your heart
rate is not shown, press the reset button to
reset the pulse sensor.
5
When you are finished exercising, turn off the
power
3
Each time the power
is turned on, the
manual program will
be selected, as
shown by the ÒP-1Ó in
the display. To select
one of the heart rate programs, press the program
button repeatedly until a ÒP-7,Ó ÒP-8,Ó ÒP-9,Ó ÒP10Ó
or ÒP11Ó appears in the display.
To turn off the power, simply wait for about
three minutes. If the pedals are not moved and
the console buttons are not pressed for three
minutes, the power will turn off automatically.
HOW TO USE A HEART RATE PROGRAM
Each heart rate program automatically adjusts the
resistance of the pedals to keep your heart rate near a
certain level while you exercise.
Each heart rate program is designed to keep your
heart rate near a certain percentage of your
maximum heart rate while you exercise. (Your
maximum heart rate is estimated by subtracting
your age from 220. For example, if you are 30
years old, your maximum heart rate is 190.)
Programs 7 and 8 are low-intensity fat burning programs. To burn fat, you must exercise at a low intensity
level for a sustained period of time. As you exercise,
pedal at a relatively slow speed; the resistance of the
pedals will increase or decrease as needed to keep
your heart rate at the proper level.
Program 7 (P-7) will keep your heart rate near
50% of your maximum heart rate while you exercise; P-8 will keep your heart rate near 60% of
your maximum heart rate; P-9 will keep your
heart rate near 70% of your maximum heart rate;
P10 will keep your heart rate near 80% of your
maximum heart rate; and P11 will keep your heart
rate near 90% of your maximum heart rate.
Programs 9, 10, and 11 are moderate-intensity aerobic
programs. For aerobic exercise, you must exercise at
a moderate intensity level for a prolonged period of
time. As you exercise, pedal at a moderate speed; the
resistance of the pedals will increase or decrease as
needed to keep your heart rate at the proper level.
4
WARNING: The pulse sensor may give readings lower than your actual heart rate, especially at fast pedaling speeds. Stop exercising
and cool down if you feel faint or dizzy.
Turn on the power
To turn on the power, press any button on the
console. Note: If batteries were just installed, the
power will already be on.
2
Begin exercising and follow your progress
with the console display
As you exercise,
follow your progress
Matrix
with the matrix on
the left side of the
display. During the
first ten seconds of
the program, the first column of the matrix will
flash. After ten seconds, the column will move to
the right and the first column will continue to
flash. At the end of every ten seconds, all columns
will move to the right and the first column will
continue to flash. Note: As the resistance level of
the pedals changes, the height of the flashing column will also change.
Follow the steps below to use a heart rate program.
1
Select one of the heart rate programs
Enter your age into the console
In addition to the matrix, the display will show your
pedaling speed, the number of Calories you have
burned, the elapsed time, and your total distance.
Before you use a
heart rate program,
you must enter your
age into the console.
First, press the age
set button. The let-
Note: When a heart rate program is used, the
resistance buttons will not function.
10
5
Measure your heart rate regularly
6
During the program, slow your pedaling speed
briefly and measure your heart rate regularly
(refer to step 5 on page 9). Each time you measure your heart rate, the resistance of the pedals
will automatically increase or decrease, if necessary, to keep your heart rate near the preselected percentage of your maximum heart rate. It is
not necessary to keep your hands on the metal
contacts when you are not measuring your heart
rate. Note: If your heart rate is not shown,
press the reset button to reset the pulse sensor.
When you are finished exercising, turn off the
power
To turn off the power, simply wait for about
three minutes. If the pedals are not moved and
the console buttons are not pressed for three
minutes, the power will turn off automatically.
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the exercise cycle regularly. The exercise cycle can be cleaned with a soft,
damp cloth. To prevent damage to the console, keep
liquids away from the console and keep the console
out of direct sunlight.
PULSE SENSOR TROUBLE-SHOOTING
BATTERY REPLACEMENT
¥ If your heart rate is not shown when the pulse sensor is used, press the resistance Ð button to reset
the pulse sensor.
¥ Avoid moving your hands while using the pulse sensor. Excessive movement may interfere with heart
rate readings.
If the console does not function properly, the batteries
should be replaced. To replace the batteries, the console must be removed from the console base. Refer
to assembly step 4 on page 5.
¥ Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
¥ For the most accurate heart rate reading, hold the
metal contacts for about 15 seconds.
¥ For optimal performance of the pulse sensor, keep
the metal contacts clean. The contacts can be
cleaned with a soft clothÑnever use alcohol,
abrasives, or chemicals.
11
EXERCISE GUIDELINES
During the first few months of your exercise program,
keep your heart rate near the low end of your training
zone as you exercise. After a few months of regular
exercise, your heart rate can be increased until it is
near the middle of your training zone as you exercise.
WARNING: Before beginning this or any
exercise program, consult your physician.
This is especially important for individuals
over the age of 35 or individuals with pre-existing health problems.
To measure your heart rate, use the built-in pulse
sensor. You can also measure your heart rate by placing two fingers on your wrist as shown. Stop exercising and take a sixsecond heartbeat
count. Multiply the
result by ten to
find your heart
rate. (A six-second
count is used
because your
heart rate drops
quickly when you
stop exercising.) If your heart rate is too high,
decrease the intensity of your exercise. If your heart
rate is too low, increase the intensity of your exercise.
WARNING: The pulse sensor is not a medical
device. Various factors may affect the accuracy of heart rate readings. The pulse sensor
is intended only as an exercise aid in determining heart rate trends in general.
Exercise has proven essential for good health and
well-being. Regular participation in a well-rounded
exercise program results in a stronger and more efficient heart, improved respiratory function, increased
stamina, better weight management, increased ability
to deal with stress, and greater self-esteem.
EXERCISE INTENSITY
WORKOUT GUIDELINES
To maximize the benefits of exercising, it is important
to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a
guide. For effective aerobic exercise, your heart rate
should be maintained at a level between 70% and
85% of your maximum heart rate as you exercise.
This is known as your training zone. You can find
your training zone in the table below. Training zones
are listed according to age and physical condition.
A well-rounded workout includes three important parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in preparation for exercise.
Training zone exercise, consisting of 20 to 40 minutes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training
zone for longer than 20 minutes.)
TRAINING ZONE (BEATS/MIN.)
AGE
UNCONDITIONED CONDITIONED
20
138Ð167
133Ð162
25
136Ð166
132Ð160
30
135Ð164
130Ð158
35
134Ð162
129Ð156
40
132Ð161
127Ð155
45
131Ð159
125Ð153
50
129Ð156
124Ð150
55
127Ð155
122Ð149
60
126Ð153
121Ð147
65
125Ð151
119Ð145
70
123Ð150
118Ð144
75
122Ð147
117Ð142
80
120Ð146
115Ð140
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three workouts each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. Caution: Be sure to progress at your own
pace and avoid overdoing it. Incorrect or excessive
training may result in injury to your health.
Remember, the key to success is make exercise a
regular and enjoyable part of your everyday life.
12
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the
right. Move slowly as you stretchÑnever bounce.
1
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for each leg. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons and ankles.
3
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
13
14
1
1
1
1
1
1
4
1
1
2
8
1
1
1
2
1
4
1
1
4
1
2
8
1
4
1
2
1
4
1
Frame
Console
Rear Stabilizer
Left Side Shield
Right Side Shield
Handlebar Post
M8 x 15mm Button Screw
Seat Knob
Console Base
Handlebar Foam
#8 x 19mm Screw
Seat
Seat Post
ÒCÓ Clip
Handlebar Endcap
Handlebar
Monitor Screw
Extension Wire
Pulley
Console Screw
Seat Post Bushing
Pulse Wire
#10 x 32mm Screw
Reed Switch Wire
M8 x 20mm Button Screw
Seat Post Collar
Pulse Handle Assembly
Control Board
M6 x 15mm Hex Screw
Belt
Description
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
1
2
2
2
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
2
1
1
2
18
4
1
2
Key No. Qty.
Magnet
Crank Bearing
Crank
Crank Arm
M8 x 20mm Washer Screw
Crank Cap
Right Pedal
Right Pedal Strap
Crank Nut
Left Pedal
Left Pedal Strap
Front Stabilizer Endcap
#4 x 3/8Ó Screw
Lower Wire Harness
M10 Nylon Jam Nut
Idler Bushing
Idler Wheel
Idler Spacer
Idler Arm
M10 x 26mm Bolt
Idler Spring
M10 Nylon Locknut
M10 Black Flat Washer
Axle
Armature
M8 Nylon Locknut
M8 Black Flat Washer
#8 x 5/16Ó Screw
Generator Housing
M8 Zinc Flat Washer
Description
61
62
63
64
65
66
67
#
#
1
1
4
2
1
1
3
1
1
Key No. Qty.
Left Upper Side Shield
Right Upper Side Shield
M8 x 55mm Button Screw
Rear Stabilizer Endcap
Axle Spacer
#8 x 8mm Screw
Armature Screw
UserÕs Manual
Allen Wrench
Description
R0899A
Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of this manual for information about ordering
replacement parts.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Key No. Qty.
EXPLODED DRAWINGÑModel No. IMEX35080
15
67
67 56
10
20
20
15
2
57
65
54
55
42
58
27
17
20
28
22
17
40
41
16
9
59
36
57
7
25
57 6
57
34
35
32
42
52
64
39
24
43
53
47 48
46
45
57
44
7
57
25
57
18
53
1
60
57 56
49
51
63
57
26
21
50
29
13
57
12
63
23
8
29
57
14
32
66
EXPLODED DRAWINGÑModel No. IMEX35080
3
11
23
31
57
19
33
64
4
11
34
11
35
36
23
23
11
61
11
37
38
30
11
5
62
R0899A
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be
prepared to give the following information when calling:
¥ The MODEL NUMBER of the product (IMEX35080)
¥ The NAME of the product (IMAGE¨ 3.2C exercise cycle)
¥ The SERIAL NUMBER of the product (see the front cover of this manual)
¥ The KEY NUMBER and DESCRIPTION of the part(s) from page 14 of this manual.
IMAGE¨ is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center, products used
for commercial or rental purposes, or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 155060 R0899A
Printed in USA © 1999 ICON Health & Fitness, Inc.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement