Aeg CKB901A4BM User Manual

Aeg CKB901A4BM User Manual
CKB901A4BM
USER
MANUAL
EN
User Manual
Cooker
2
www.aeg.com
CONTENTS
1. SAFETY INFORMATION............................................................................................. 3
2. SAFETY INSTRUCTIONS.............................................................................................5
3. PRODUCT DESCRIPTION...........................................................................................9
4. BEFORE FIRST USE..................................................................................................... 9
5. HOB - DAILY USE...................................................................................................... 10
6. HOB - HINTS AND TIPS............................................................................................11
7. HOB - CARE AND CLEANING................................................................................. 12
8. OVEN - DAILY USE ................................................................................................... 13
9. OVEN - CLOCK FUNCTIONS...................................................................................14
10. OVEN - USING THE ACCESSORIES......................................................................14
11. OVEN - HINTS AND TIPS....................................................................................... 14
12. OVEN - CARE AND CLEANING............................................................................ 18
13. TROUBLESHOOTING............................................................................................. 21
14. INSTALLATION........................................................................................................23
15. ELECTROLUX / AEG MAJOR APPLIANCES - WARRANTY CONDITIONS........28
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent
disability.
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away unless continuously supervised.
Children of less than 3 years of age should be kept
away unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
Only a qualified person must install this appliance and
replace the cable.
This appliance is intended for use up to an altitude of
2000 m above sea level.
4
www.aeg.com
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This appliance is not intended to be used on a ships,
boats or vessels.
Do not install the appliance behind a decorative door
in order to avoid overheating.
Do not install the appliance on a platform.
Do not operate the appliance by means of an external
timer or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door or the glass of hinged
lids of the hob since they can scratch the surface,
which may result in shattering of the glass.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements.
Always use oven gloves to remove or put in
accessories or ovenware.
Before maintenance cut the power supply.
Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
ENGLISH
•
•
5
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
2. SAFETY INSTRUCTIONS
This appliance is suitable for the
following markets: ZA
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• The kitchen cabinet and the recess
must have suitable dimensions.
• Keep the minimum distance from
other appliances and units.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
• Parts of the appliance carry current.
Close the appliance with furniture to
prevent touching the dangerous
parts.
• The sides of the appliance must stay
adjacent to appliances or units with
the same height.
• Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware to fall from the
appliance when the door or the
window is opened.
• Make sure to install a stabilizing
means in order to prevent tipping of
the appliance. Refer to Installation
chapter.
• The glass splashback must be
assembled in place when the
appliance operates.
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Do not let mains cables touch or
come near the appliance door,
especially when the door is hot.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
6
www.aeg.com
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
• Fully close the appliance door, before
you connect the mains plug to the
mains socket.
2.3 Gas connection
• All gas connections should be made
by a qualified person.
• Before installation, make sure that the
local distribution conditions (nature of
the gas and gas pressure) and the
adjustment of the appliance are
compatible.
• Make sure that there is air circulation
around the appliance.
• The information about the gas supply
is on the rating plate.
• This appliance is not connected to a
device, which evacuates the products
of combustion. Make sure to connect
the appliance according to current
installation regulations. Pay attention
to requirements regarding adequate
ventilation.
• This appliance requires an operating
pressure of 2.8 - 3.0 kPa at the
appliance. A suitable LPG regulator
that complies with the requirements
of SANS 1237 must be installed.
• Important information for the user.
This appliance may only be installed
by a registered SAQCC Gas installer.
All registered installers are issued with
a card carrying their registration
number. Ask to be shown the card
before allowing the installation work
to commence and make a note of the
Installer registration number. Upon
completion of the installation, the
installer is required to explain the
operational details of the appliance
together with the safety instructions.
You will be asked to sign the
acceptance of the installation and be
provided with the completion
certificate. You should only sign the
acceptance of the installation when
the installation is completed to your
satisfaction. Note that your invoice is
required if you wish to make a
guarantee claim.
• Important information for the
installer.This appliance may only be
installed by a gas installer registered
with the South African qualification
and certification committee (SAQCC).
The appliance must be installed in
accordance with the requirements of
SANS 10087-1 for use with LPG, SANS
827 for use with NG and any fire
department regulations and/or local
bylaws applicable to the area. If in
doubt, check with the relevant
authority before undertaking the
installation. Upon completion of the
installation you are required to fully
explain and demonstrate to the user
the operational details and safety
practices applicable to the appliance
and the installation.
2.4 Use
WARNING!
Risk of injury and burns.
Risk of electrical shock.
• This appliance is for household use
only.
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Deactivate the appliance after each
use.
• Be careful when you open the
appliance door while the appliance is
in operation. Hot air can release.
• Do not operate the appliance with
wet hands or when it has contact with
water.
• Do not use the appliance as a work
surface or as a storage surface.
ENGLISH
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Open the appliance door carefully.
The use of ingredients with alcohol
can cause a mixture of alcohol and air.
WARNING!
Risk of damage to the
appliance.
• To prevent damage or discoloration
to the enamel:
– do not put ovenware or other
objects in the appliance directly
on the bottom.
– do not put water directly into the
hot appliance.
– do not keep moist dishes and
food in the appliance after you
finish the cooking.
– be careful when you remove or
install the accessories.
• Discoloration of the enamel or
stainless steel has no effect on the
performance of the appliance.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
• Do not keep hot cookware on the
control panel.
• Do not let cookware boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
cookware.
7
• Do not put aluminium foil on the
appliance or directly on the bottom of
the appliance.
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches. Always lift these
objects up when you have to move
them on the cooking surface.
• Provide good ventilation in the room
where the appliance is installed.
• Use only stable cookware with the
correct shape and diameter larger
than the dimensions of the burners.
• Make sure the flame does not go out
when you quickly turn the knob from
the maximum to the minimum
position.
• Use only the accessories supplied
with the appliance.
• Do not install a flame diffuser on the
burner.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
• If you smell gas:
– Turn off gas supply at bottle
– Do not smoke
– Extinguish all naked flames
– Do not touch any electrical
switches
– Keep natural ventilation holes
open
– Open doors and windows to get
rid of the gas
– Check for gas leaks and refer to
the gas connection chapter
If odour continues, keep away from
the appliance and immediately call
your gas supplier or fire department.
• Action to be taken in the event of a
burn back (fire in burner tube or
chamber):
In the event of a burn-back, where the
flame burns back into the jet,
immediately turn off the gas supply at
the control valve on the panel. Ensure
that the flame is extinguished, wait for
a few minutes and re-light the burner
in normal manner.
If the problem occurs again, turn off
the main gas supply valve and contact
the Authorised Service Centre.
8
www.aeg.com
2.5 Care and Cleaning
WARNING!
Risk of injury, fire, or damage
to the appliance.
• Before maintenance, deactivate the
appliance.
Disconnect the mains plug from the
mains socket.
• Make sure the appliance is cold.
There is the risk that the glass panels
can break.
• Replace immediately the door glass
panels when they are damaged.
Contact the Authorised Service
Centre.
• Be careful when you remove the door
from the appliance. The door is
heavy!
• Fat and food remaining in the
appliance can cause fire.
• Clean regularly the appliance to
prevent the deterioration of the
surface material.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
• If you use an oven spray, obey the
safety instructions on the packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of
detergent.
• Do not clean the burners in the
dishwasher.
2.6 Internal lighting
WARNING!
Risk of electric shock.
• The type of light bulb or halogen
lamp used for this appliance is for
household appliances only. Do not
use it for house lighting.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same
specifications.
2.7 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
2.8 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
• Remove the door catch to prevent
children or pets from becoming
trapped in the appliance.
• Flat the external gas pipes.
ENGLISH
3. PRODUCT DESCRIPTION
3.1 General overview
1
2
3
4
5
6
5
4
8
3
2
7
1
2
3
4
5
6
7
8
Knob for the Minute Minder
Knob for the temperature
Knob for the oven functions
Knobs for the hob
Heating element
Lamp
Fan
Shelf positions
1
3.2 Cooking surface layout
1
2
3
6
5
4
3.3 Accessories
• Wire shelf
For cookware, cake tins, roasts.
• Storage compartment
The storage compartment is below
the oven cavity. To use the
compartment, lift the lower front door
then pull it down.
1 Auxiliary burner
2 Steam outlet - number and position
depend on the model
3 Semi-rapid burner
4 Semi-rapid burner
5 Triple Crown burner
6 Rapid burner
WARNING!
The storage
compartment can
become hot when the
appliance operates.
4. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
4.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
9
10
www.aeg.com
Refer to "Care and
cleaning" chapter.
Clean the oven and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
4.2 Preheating
Preheat the empty oven before first use.
1. Set the function
and the
maximum temperature.
2. Let the oven operate for 1 hour.
3. Set the function
and set the
maximum temperature.
4. Let the oven operate for 15 minutes.
5. Set the function
and set the
maximum temperature.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
5. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Ignition of the hob burner
Always light the burner
before you put on the
cookware.
counterclockwise to the maximum gas
flow position .
Keep the knob for the hob pushed for
equal or less than 10 seconds to let the
thermocouple warm up. If not, the gas
supply is interrupted.
Adjust the flame after it is regular.
WARNING!
Be very careful when you use
open fire in the kitchen
environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
WARNING!
Do not keep the knob
pushed for more than 15
seconds. If the burner does
not light after 15 seconds,
release the knob, turn it into
the off position and try to
light the burner again after
minimum 1 minute.
The spark generator can
start automatically when you
switch on the mains, after
installation or a power cut. It
is normal.
If after some tries the burner
does not light, check if the
crown and its cap are in the
correct position.
In the absence of electricity
you can ignite the burner
manually.
Ignition of a hob burner with the
thermocouple
• For manual ignition put the flame
near the burner. Push the knob for the
hob down and turn it
counterclockwise to the maximum gas
flow position .
• For integrated ignition on knob push
the knob for the hob down and turn it
If the burner accidentally
goes out, turn the knob to
the off position and try to
light the burner again after
minimum 1 minute.
5.2 Burner overview
WARNING!
Check that the heads
burners and the relative
burner caps are correctly
positioned in their housings.
ENGLISH
A
A.
B.
C.
D.
Burner cap
Burner crown
Ignition candle
Thermocouple (if applicable)
5.3 Turning the burner off
B
To put the flame out, turn the knob to
the off position
C
D
.
WARNING!
Always turn the flame down
or switch it off before you
remove the pans from the
burner.
A
B
C
D
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
WARNING!
Do not put the same pan on
two burners.
WARNING!
Do not put unstable or
damaged pots on the burner
to prevent spills and injuries.
CAUTION!
Make sure that pot handles
are not above the front edge
of the cooktop.
CAUTION!
Make sure that the pots are
placed centrally on the
burner in order to get the
maximum stability and a
lower gas consumption.
6.2 Diameters of cookware
WARNING!
Use cookware with
diameters applicable to the
size of burners.
11
12
www.aeg.com
Burner
Diameter of cookware (mm)
Triple Crown
160 - 260
Rapid
160 - 240
Semi-rapid
140 - 240
Auxiliary
120 - 180
6.3 Energy saving
• If it is possible, always put the lids on
the cookware.
• When the liquid starts to boil, turn
down the flame to barely simmer the
liquid.
7. HOB - CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 General information
• Clean the hob after each use.
• Always use cookware with a clean
base.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special cleaner suitable for the
surface of the hob.
• Wash stainless steel parts with water,
and then dry them with a soft cloth.
7.2 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
cloth.
• To clean the enamelled parts, caps
and crowns, wash them with warm
soapy water and dry them carefully
before you put them back on.
7.3 Cleaning the spark plug
This feature is obtained through a
ceramic ignition candle with a metal
electrode. Keep these components well
clean to prevent difficult lighting and
check that the burner crown holes are
not obstructed.
7.4 Pan supports
The pan supports are not
resistant to washing in a
dishwasher. They must be
washed by hand.
1. Remove the pan supports to easily
clean the hob.
Be very careful when you
replace the pan supports
to prevent the hob top
from damage.
2. After you clean the pan supports,
make sure that they are in correct
positions.
3. For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre
of the burner.
7.5 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the
conditions of the gas supply pipe and
the pressure adjuster, if fitted.
ENGLISH
13
8. OVEN - DAILY USE
8.2 Safety thermostat
WARNING!
Refer to Safety chapters.
8.1 Turning the oven on and
off
1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature to
select a temperature.
3. To turn off the oven, turn the knobs
for the oven functions and
temperature to the off position.
The lamp turns on when the oven
operates.
Incorrect operation of the oven or
defective components can cause
dangerous overheating. To prevent this,
the oven has a safety thermostat which
interrupts the power supply. The oven
turns on again automatically when the
temperature drops.
8.3 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool.
8.4 Oven functions
Symbol Oven function
Application
Off position
The oven is off.
Conventional Cooking
To bake and roast food on one shelf position.
Bottom Heat
To bake cakes with crispy bottom and to preserve
food.
Light Cooking
To bake in tins and dry on one shelf level at a low
temperature.
Grilling
To grill flat food and to toast bread.
The maximum temperature for this function is 210
°C.
True Fan Cooking
To bake on up to two shelf positions at the same
time and to dry food.
Set the temperature 20 - 40 °C lower than for Conventional Cooking
Defrost
To defrost food (vegetables and fruit). The defrosting
time depends on the amount and size of the frozen
food.
14
www.aeg.com
9. OVEN - CLOCK FUNCTIONS
9.1 Minute Minder
This function has no effect
on the operation of the
appliance.
2. Turn the knob for the timer as far as it
goes, then turn it to necessary time
period.
After the time period is completed, an
acoustic signal sounds.
1. Set an oven function and the
temperature.
10. OVEN - USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
10.1 Inserting the accessories
Wire shelf:
Put the shelf between the guide bars of
the shelf support. The front and back
bars should be placed upwards.
WARNING!
The maximum weight
permitted on the oven shelf
is 24 kg. Avoid putting
heavier food on the shelf.
11. OVEN - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
11.1 General information
• The appliance has five shelf positions.
Count the shelf positions from the
bottom of the appliance floor.
• The appliance has a special system
which circulates the air and constantly
recycles the steam. With this system
you can cook in a steamy environment
and keep the food soft inside and
crusty outside. It decreases the
cooking time and energy
consumption to a minimum.
• Moisture can condense in the
appliance or on the door glass panels.
This is normal. Always stand back
from the appliance when you open
the appliance door while cooking. To
decrease the condensation, operate
the appliance for 10 minutes before
cooking.
• Clean the moisture after each use of
the appliance.
• Do not put the objects directly on the
appliance floor and do not put
aluminium foil on the components
when you cook. This can change the
baking results and cause damage to
the enamel.
ENGLISH
11.2 Baking
• Use the lower temperature the first
time.
• You can extend baking times by 10 –
15 minutes if you bake cakes on more
than one shelf position.
• Cakes and pastries at different
heights do not always brown equally.
There is no need to change the
temperature setting if an unequal
browning occurs. The differences
equalize during baking.
• Trays in the oven can twist during
baking. When the trays become cold
again, the distortions disappear.
15
To prevent too much smoke in the oven
during roasting, add some water into the
deep pan. To prevent the smoke
condensation, add water each time after
it dries up.
11.5 Cooking times
Cooking times depend on the type of
food, its consistency, and volume.
Initially, monitor the performance when
you cook. Find the best settings (heat
setting, cooking time, etc.) for your
cookware, recipes and quantities when
you use this appliance.
11.6 Cooking tables
11.3 Baking cakes
Do not open the oven door before 3/4 of
the set cooking time is up.
The time does not include
preheating.
If you use two baking trays at the same
time, keep one empty level between
them.
11.4 Cooking meat and fish
Leave the meat for approximately 15
minutes before carving so that the juice
does not seep out.
Casseroles
Food
Quantity
(kg)
Oven function
Temperature
(°C)
Time
(min)
Shelf position
Lasagna1)
2.5 - 4.0
True Fan Cooking
190
50 - 55
2
Cannelloni
2.5 - 4.0
True Fan Cooking
190
50 - 55
2
Potato gra- 2.5 - 3.0
tin
True Fan Cooking
180
60 - 65
2
4.0 - 4.5
True Fan Cooking
180
50 - 55
2
Kebab Hala 3.5 - 4.0
True Fan Cooking
180
45 - 50
2
Traditional
Bobotie
True Fan Cooking
170
40
2
1)
1)
Macaroni
oven
1)
1.0 - 1.5
16
www.aeg.com
Food
Quantity
(kg)
Oven function
Temperature
(°C)
Time
(min)
Shelf position
Chicken
Pie
1.2 - 1.8
True Fan Cooking
190
30
2
Chicken
Pie
1.2 - 1.8
Light Cooking
200 - 220
45 - 55
2
1) Preheat the oven for 15 minutes.
Meat & Poultry
Food
Quantity
(kg)
Oven function
Temperature
(°C)
Time
(min)
Shelf position
Sheep
3.0 - 4.0
True Fan Cooking
200
90 - 120
2
Chicken
2.0 - 3.5
Conventional cooking
230
70 - 901) 2
Duck
2.4 - 3.6
True Fan Cooking
220
90 - 120
2
Goose
5.0 - 6.0
True Fan Cooking
220
100 160
2
Rabbit
2.0 - 3.0
True Fan Cooking
180
90 - 120
2
Beef
2.4 - 3.0
True Fan Cooking
250
90 - 120
2
1) Turn over after 45 min.
Fish
Food
Quantity
(kg)
Oven function
Temper- Time
ature (°C) (min)
Shelf position
Pike
1.6 - 3.0
True Fan Cooking
190
50 - 60
2
Dorade
0.8 - 1.4
True Fan Cooking
180
30 - 40
2
Trout
1.0 - 2.0
True Fan Cooking
200
25 - 30
2
Dorada in
salt
0.3 - 0.5
Light Cooking
190 - 210
50 - 60
2
Sea bream
0.3 - 0.5
Light Cooking
190 - 210
50 - 60
2
Food
Quantity
(kg)
Oven function
Tempera- Time
ture (°C) (min)
Shelf position
Thin
1.5 - 2.5
True Fan Cooking
240
1
Pizza
1)
20 - 25
ENGLISH
17
Food
Quantity
(kg)
Oven function
Tempera- Time
ture (°C) (min)
Shelf position
Thick
1.5 - 2.0
True Fan Cooking
230
20 - 25
1
1.5 - 2.5
True Fan Cooking
180
30 - 35
1
0.5 - 0.7
Light Cooking
190 - 210
50 - 60
2
1)
Calzone
1)
Bread
sticks
1) Preheat the oven for 15 minutes.
Cakes
Food
Quantity
(kg)
Oven function
Tempera- Time
ture (°C) (min)
Shelf position
Flat cake
1.2 - 1.5
True Fan Cooking
180
15 - 20
2
2.4 - 3.0
True Fan Cooking
160
20 - 25
2 and 4
3.0 - 3.5
True Fan Cooking
140
80 - 90
2
Feter Mshal- 2.5 - 3.0
ted
True Fan Cooking
200
35 - 40
2
3.0 - 3.5
True Fan Cooking
180
50 - 60
2
2.5 - 3.0
True Fan Cooking
180
45 - 50
2
Malva pudding
0.6 - 0.8
True Fan Cooking
170
40
2
Choco muffins
0.3 - 0.5
Light Cooking
150 - 170
35 - 50
2
Apple crum- 0.7 - 1.0
ble
Light Cooking
160 - 170
45 - 55
2
Amaretti
Light Cooking
170 - 190
30 - 45
2
1)
Flat cake
1)
Sponge
cake
1)
Salty cake
1)
Yeast cake
1)
0.3 - 0.5
1) Preheat the oven for 15 minutes.
Grilling
Food
Quantity (kg)
Oven function
Time (min)
Shelf position
Sheep chops1)
1.2 - 2.5
Grilling
20 - 25
3
18
www.aeg.com
Food
Quantity (kg)
Oven function
Time (min)
Shelf position
Ribs
2.0 - 2.5
Grilling
45 - 60
3
3.0 - 3.5
Grilling
15 - 20
3
2.5 - 3.0
Grilling
20 - 25
3
Toast browning 1.0 - 1.2
Grilling
3-5
3
Grilling
15 - 20
3
1)
Burgers
1)
Mackerel
1)
1)
Toast Hawai
1.0 - 2.0
1)
1) Preheat the oven for 10 minutes.
12. OVEN - CARE AND CLEANING
WARNING!
Refer to Safety chapters.
12.1 Notes on cleaning
Clean the front of the oven with a soft
cloth with warm water and a mild
cleaning agent.
To clean metal surfaces, use a dedicated
cleaning agent.
Clean the oven interior after each use.
Fat accumulation or other food remains
may result in a fire.
Clean all accessories after each use and
let them dry. Use a soft cloth with warm
water and a cleaning agent. Do not clean
the accessories in the dishwasher.
Clean stubborn dirt with a special oven
cleaner. Do not apply oven cleaner on
the catalytic surfaces.
12.2 Stainless steel or
aluminium ovens
Clean the oven door with a damp cloth
or sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel
with the same precautions.
12.3 Removing the shelf
supports
To clean the oven, remove the shelf
supports.
CAUTION!
Be careful when you remove
the shelf supports.
1. Pull the front of the shelf support
away from the side wall.
If you have nonstick accessories, do not
clean them using aggressive agents,
sharp-edged objects or a dishwasher. It
can cause damage to the nonstick
coating.
Clean the moisture from the cavity after
each use.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
ENGLISH
19
1
2
Install the removed accessories in the
opposite sequence.
12.4 Catalytic cleaning
The cavity with a catalytic coating is selfcleaning. It absorbs fat.
Before you turn on the catalytic cleaning:
• remove all the accessories .
• clean the oven floor with warm water
and mild detergent.
• clean the inner door glass with warm
water and soft cloth.
2. Lift and turn the levers on the two
hinges till they stop (until you reach
the pins).
1. Set the function .
2. Set the maximum temperature and
let the oven operate for 1 hour.
3. Turn off the oven.
4. When the oven cools down, clean
the cavity with a wet soft cloth.
Spots or discolouration of the catalytic
coating have no effect on Catalytic
cleaning.
12.5 Cleaning the oven door
The oven door has two panels of glass
installed one behind the other. To make
the cleaning easier remove the oven
door.
WARNING!
The oven door can close if
you try to remove the
internal panel of glass when
the door is still assembled.
Do not loosen the screws.
1. Open the door fully.
Avoid placing the levers in
the vertical position and
make sure both of them are
pulled maximally towards
you.
20
www.aeg.com
6. Use a spatula made of wood or
plastic (or equivalent) to open the
inner door. Hold the outer door, and
push the inner door against the top
edge of the door. Lift the inner door.
3
2
2
3. Close the oven door to the first
opening position (halfway). Then pull
forward and remove the door from its
seat.
7. Clean the oven door with water and
soap. Clean the inner side of the
door. Dry the oven door carefully.
When the cleaning is completed, install
the glass panels and the oven door. To
install the oven door, do the above steps
in the opposite sequence.
4
4
5
6
4. Put the door on a soft cloth on a
stable surface.
5. Use a screwdriver to remove the 2
screws from the bottom edge of the
door.
6
Make sure the slot in the
hinge A rests on the edge of
the hinge support B before
releasing the oven door.
1
1
ENGLISH
21
12.6 Replacing the lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
A
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the
cavity.
B
The back lamp
Make sure the levers are in
their original position before
closing the door.
1. Turn the lamp glass cover to remove
it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
Possible cause
There is no spark when you
The hob is not connected to
try to activate the spark gen- an electrical supply or it is
erator.
connected incorrectly.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
22
www.aeg.com
Problem
Possible cause
Remedy
There is no spark when you
The fuse is blown.
try to activate the spark generator.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a qualified electrician.
There is no spark when you
Burner cap and crown are
try to activate the spark gen- placed incorrectly.
erator.
Place the burner cap and
crown correctly.
The flame extinguishes immediately after ignition.
Thermocouple is not heated
up sufficiently.
After lightning the flame,
keep the spark generator activated for equal or less than
10 seconds
The flame ring is uneven.
Burner crown is blocked with Make sure that the injector is
food residues.
not blocked and the burner
crown is clean.
The burners do not work.
There is no gas supply.
The flame colour is orange
or yellow.
The lamp does not operate.
Check the gas connection.
The flame can look orange
or yellow in some areas of
the burner. This is normal.
The lamp is defective.
Replace the lamp.
Steam and condensation
You left the dish in the oven
settle on the food and in the for too long.
cavity of the oven.
Do not leave the dishes in
the oven for longer than 15 20 minutes after the cooking
process ends.
The oven does not heat up.
The necessary settings are
not set.
Make sure that the settings
are correct.
It takes too long to cook the
dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
on the front frame of the oven cavity. Do
not remove the rating plate from the
oven cavity.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
ENGLISH
We recommend that you write the data here:
Serial number (S.N.)
.........................................
14. INSTALLATION
WARNING!
Refer to Safety chapters.
14.1 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
For minimal distances for fitting check
the table.
B
C
A
Dimension
mm
B
650
C
150
14.2 Technical data
Voltage
220 - 240 V
Frequency
50 - 60 Hz
Appliance class
1
Dimension
mm
Height
885 - 915
Width
900
Depth
600
Minimum distances
Dimension
mm
A
400
14.3 Other technical data
LPG:
G30 2.8-3.0 kPa
Natural Gas:
G20 2.0 kPa
14.4 Bypass diameters
BURNER
Ø BYPASS 1/100 mm
Auxiliary
29 / 30
Semi-rapid
32
Rapid
42
Triple Crown
67
23
24
www.aeg.com
14.5 Gas burners for NATURAL GAS G20 2.0 kPa
BURNER
NORMAL POWER
kW
REDUCED POWER kW
INJECTOR MARK
1/100 mm
Triple Crown
4.0
1.8
146
Rapid
3.0
0.75
119
Semi-rapid
2.0
0.45
96
Auxiliary
1.0
0.35
70
14.6 Gas burners for LPG G30 2.8-3.0 kPa
BURNER
NORMAL POWER
kW
REDUCED POWER kW
INJECTOR MARK
1/100 mm
Triple Crown
4.0
1.8
101
Rapid
3.0
0.72
88
Semi-rapid
2.0
0.43
71
Auxiliary
1.0
0.35
50
14.7 Gas connection
Use a fixed connections or use a flexible
stainless steel pipes in compliance with
the regulation in force. If you use flexible
metallic pipes, make sure they do not
come in touch with mobile parts and
they are not squeezed.
In installation always use the pipe holder
and the gasket. The flexible pipe can be
applied when:
• it can not get hotter than room
temperature, higher than 30 °C,
• it is not longer than 1500 mm,
• it has no narrowing anywhere,
• it is not twisted or tighten,
• it does not get in touch with sharp
edges or corners,
• it's conditions can be easily checked.
When checking the flexible pipe make
sure:
• it does not show cracks, cuts, marks of
burnings on the two ends and on its
full length,
• the material is not hardened, but
shows its correct elasticity,
• the fastening clamps are not rusted,
• expired term is not due.
If one or more defects are visible, do not
repair the pipe, but replace it.
14.8 Flexible nonmetal pipes
connection
If you have an easy access to the
connection, you can use a flexible pipe.
The flexible pipe must be tightly
attached by clamps.
The gas supply ramp is on the rear side
of the control panel.
ENGLISH
14.9 Adjustment to different
types of gas
WARNING!
Let only an authorized
person do the adjustment to
different types of gas.
25
2. Remove the caps and crowns of the
burner.
3. Remove the injectors with a socket
spanner 7.
4. Replace injectors with the ones
necessary for the type of gas you use.
The appliance is set for
liquid gas. You can change it
to natural gas, with the
correct injectors.
The gas rate is adjusted to
suit.
WARNING!
Before you replace the
injectors, make sure that the
gas knobs are in the Off
position. Disconnect the
appliance from the electrical
supply. Let the appliance
cool down. There is a risk of
injury.
The appliance is set to
default gas. To change the
setting choose a pipe holder
from the list. Always use the
gasket sealing.
A
B
C
A. Gas connection end
B. Natural Gas pipe holder
C. LPG pipe holder
5. Replace the rating plate (it is near the
gas supply pipe) with the one for the
new type of gas supply.
You can find this plate in
the bag supplied with
the appliance.
If the supply gas pressure is not constant
or it is different from the necessary
pressure, install an applicable pressure
adjuster on the gas supply pipe.
14.11 Adjusting the minimum
gas level on the hob burner
1. Disconnect the appliance from the
electricity.
2. Remove the knob for the hob. If
there is no access to the bypass
screw dismount the control panel
before adjustment start.
3. With a thin and flat screwdriver adjust
the bypass screw A.
The model determines the position
of the bypass screw A.
A
14.10 Hob injectors
replacement
Replace the injectors when you change
the gas type.
1. Remove the pan supports.
A
26
www.aeg.com
Changing from natural gas to
liquid gas
1. Fully tighten the bypass screw.
2. Put the knob back.
2. Put the appliance on the sidewall on
a clean and smooth surface. Place
each foot into a separate hole, in the
plinth, and rotate it clockwise.
Changing from liquid gas to
natural gas
1. Unscrew approximately one turn the
bypass screw position A.
2. Put the knob for the hob back.
3. Connect the appliance to the
electricity.
4.
5.
6.
7.
8.
WARNING!
Put the mains plug into
the mains socket only if
all parts are back into
their initial position.
There is a risk of injury.
Light the burner.
Refer to "Hob - Daily use" chapter.
Turn the knob for the hob to the
minimum position.
Remove the knob for the hob again.
Screw on slowly the bypass screw till
the flame becomes minimum and
stable.
Put the knob for the hob back on.
B
3. If the floor is not equally flat, use the
adjustable feet on the bottom of the
appliance to set a stable position for
the appliance.
14.12 Levelling
CAUTION!
Remove all the accessories
from the oven.
1. Disassemble the pan supports and all
the burner assemblies.
To install all the accessories, do the first
step in an opposite sequence.
14.13 Backguard
Fix backguard B on the side holes C from
hob using a cross screwdriver and the
screws A.
A
A
C
B
C
ENGLISH
27
14.14 Anti-tilt protection
126-130
mm
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
CAUTION!
Make sure you install the
anti-tilt protection at the
correct height.
Make sure that the surface
behind the appliance is
smooth.
You must install the anti-tilt protection. If
you do not install it, the appliance can
tilt.
Your appliance has the symbol shown on
the picture (if applicable) to remind you
about the installation of the anti-tilt
protection.
325-330
mm
2. You can find the hole on the left side
at the back of the appliance. Lift the
front of the appliance and put it in
the middle of the space between the
cupboards. If the space between the
bench cupboards is larger than the
width of the appliance, you must
adjust the side measurement to
centre the appliance.
If you changed the
dimensions of the cooker,
you must align the non-tip
device correctly.
CAUTION!
If the space between the
bench cupboards is larger
than the width of the
appliance, you must adjust
the side measurement to the
centre of the appliance.
14.15 Electrical installation
WARNING!
The manufacturer is not
responsible if you do not
follow the safety precautions
from Safety chapters.
Connection to the mains
1. Install the anti-tilt protection 325 330 mm down from the top surface
of the appliance and 126 - 130 mm
from the side of the appliance into
the circular hole on a bracket. Screw
it into the solid material or use
applicable reinforcement (wall).
1. Fit the power cable with a
standardized plug suitable for the
load indicated on the data label.
2. Connect the wires as shown below.
3. Remember that the earth wire must
be longer than the phase wires
letter
L (phase)
= brown wire
letter
N (neutral)
= blue wire
symbol
(earth)
= green/yellow
wire
28
www.aeg.com
WARNING!
The power cable must not
touch the part of the
appliance shaded in the
illustration.
15. ELECTROLUX / AEG MAJOR APPLIANCES WARRANTY CONDITIONS
For domestic use only.
Not for commercial or industrial use.
Any alteration or modification of the
equipment voids the warranty.
4.
Failure to use a certified electrician or
Electrolux authorised service agent or
genuine parts for installation or service
voids the warranty.
1. Electrolux / AEG warrants the
equipment against defective material
or faulty manufacture, provided it is
used for domestic purposes only, for
a period of 36 (thirty six) months,
from the date of purchase by the
original retail purchaser. This
warranty only applies to Electrolux
and AEG large appliances.
2. a. In the first 6 (six) months from
date of purchase, for valid
warranty claims, collection, return
and installation (Built-in and gas
appliances) of the appliance will
be free of charge within South
Africa if installed by an
authorized Electrolux service
agent.
b. For the remainder of the
warranty period where the
repaired appliance is used or
installed more than 50 kilometres
from the nearest Electrolux
service agent or elsewhere in
South Africa, travel costs to the
place of use or installation shall
be for the account of the
purchaser.
3. This warranty is given on condition
that only labour, parts and
accessories supplied by authorised
agents are at all times used in
connection with the appliance,
including the installation thereof, and
5.
6.
7.
that an authorised Electrolux service
agent installs and/or services the
appliance.
Electrolux shall not be responsible
for damage of any kind resulting
from electricity fluctuations, faults in
the building wiring, faulty
installations, and improper use of
controls or failure to use the
appliance in accordance with the
operating instructions and/or general
misuse and/or abuse, or if not used
for domestic purposes only, or for
damage caused by a superior force
(vis maior). Any repair or tampering
by an unauthorised person or
attempt to repair or tamper with the
equipment, or use of parts not
supplied by authorised agents, or
alterations or modification to the
equipment, shall render the warranty
null and void.
After the first 6 (six) months from the
date of purchase, this warranty does
not apply to light bulbs, loose glass,
glass oven doors and enamelled
surfaces, filters and other parts
subject to wear and tear or
discolouring, as well as damage
caused by abrasive and highly
concentrated cleaners and/or
cleaning materials or cleaners
prohibited by the user manual.
Electrolux shall not be responsible in
terms of this warranty for the
replacement or repair of any part of
the equipment which may have been
damaged in transit if delivery is
undertaken by any party other than
Electrolux or an authorised agent.
All gas appliances are to be installed
by a gas installer, registered with
SAQCC GAS. Electrical appliances
are to be installed by a qualified
ENGLISH
electrician who is an authorised
service agent or assisted by an
authorised service agent from who
proof of installation will be required.
8. Repairs carried out under warranty
have a guarantee period of 3 (three)
months on the parts and labour
supplied to repair the unit and does
not extend the warranty nor does it
start a new warranty. Parts removed
during guarantee repairs become the
property of Electrolux.
9. After expiry of 6 (six) months from the
date of purchase the warranty shall
be available only to the original retail
purchaser of Electrolux domestic
appliances from an authorised
Electrolux Dealer or Distributor and
only where the appliance has been
retained for use in the Republic of
South Africa.
10. Failure to produce documentary
proof of the date of original
29
acquisition by the original purchaser
to Electrolux or an authorised service
agent, will result in normal charges
being levied for travel costs, the work
carried out and the parts supplied,
unless a production date can be
proved to be within the 6 (six)
months preceding the warranty
claim.
11. After 6 (six) months from the date of
purchase of the appliance the liability
of Electrolux under this warranty is
limited to the replacement and/or
repair of the defective parts within
the warranty period and does not
extend to the installation or removal
of the appliance.
CUSTOMER CARE HELPLINE
0800 222 825
Service and Spares
In the event of your appliance requiring a service or if you wish to purchase spare parts,
contact your local Electrolux Service Centre by telephoning:
0800 222 825 (Tollfree in South Africa)
Help us to help you Please determine your type of enquiry before writing or telephoning.
When you contact us we need to know:
•
•
•
•
•
Your name and telephone number
Date of Purchase and Invoice number
Physical address where appliance is located
Model and serial number of the appliance
Clear and concise details of the fault
Customer Care
For general enquiries or information regarding Electrolux / AEG appliances contact:
Customer Care Department
Electrolux South Africa (Pty) Ltd.
P.O. Box 50 Paarden Eiland, 7420
Cape Town
Electrolux appliances
Telephone
00800 222 825
AEG appliances
30
www.aeg.com
E-mail
[email protected]
Website
www.electrolux.co.za
www.aeg.co.za
16. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
*
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
31
867342088-A-162018
www.aeg.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement