AEG | KFA58SIM | User manual | Aeg KFA58SIM User Manual

Aeg KFA58SIM User Manual
User Manual
1. SAFETY INFORMATION............................................................................................. 2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. INSTALLATION............................................................................................................6
4. PRODUCT DESCRIPTION...........................................................................................8
5. DAILY USE.................................................................................................................. 10
6. HINTS AND TIPS........................................................................................................12
7. CARE AND CLEANING.............................................................................................14
8. TROUBLESHOOTING............................................................................................... 14
9. TECHNICAL DATA.................................................................................................... 16
10. ENERGY EFFICIENCY............................................................................................. 17
11. GUARANTEE .......................................................................................................... 18
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
Register your product for better service:
Buy Accessories, Consumables and Original spare parts for your appliance:
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away unless continuously supervised.
Children of less than 3 years of age should be kept
away unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
If the appliance has a child safety device, it should be
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements.
Do not operate the appliance by means of an external
timer or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains.
In case the appliance is connected to the mains
directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
2.1 Installation
Only a qualified person must
install this appliance.
Risk of injury or damage to
the appliance.
• Remove all the packaging.
• Do not install or use a damaged
• Follow the installation instructions
supplied with the appliance.
• Keep the minimum distance from
other appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware falling from
the appliance when the door or the
window is opened.
• Each appliance has cooling fans on
the bottom.
• If the appliance is installed above a
– Do not store any small pieces or
sheets of paper that could be
pulled in, as they can damage the
cooling fans or impair the cooling
– Keep a distance of minimum 2 cm
between the bottom of the
appliance and parts stored in the
2.2 Electrical Connection
Risk of fire and electric
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains
• Do not let the electricity mains cable
• Make sure that a shock protection is
• Use the strain relief clamp on the
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
2.3 Use
Risk of injury, burns and
electric shock.
• Remove all the packaging, labelling
and protective film (if applicable)
before first use.
• Use this appliance in a household
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Set the cooking zone to “off” after
each use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
• Do not operate the appliance with
wet hands or when it has contact with
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
Risk of fire and explosion
• Clean the appliance regularly to
prevent the deterioration of the
surface material.
• Deactivate the appliance and let it
cool down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Risk of damage to the
• Do not keep hot cookware on the
control panel.
• Do not put a hot pan cover on the
glass surface of the hob.
• Do not let cookware to boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
• Do not put aluminium foil on the
• Cookware made of cast iron,
aluminium or with a damaged bottom
2.4 Care and cleaning
2.5 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
2.6 Disposal
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
During installation in combustible
matter, NIN SEV 1000 and fire protection
guidelines and regulations of the
Association of Cantonal Fire Insurance
shall be strictly adhered to.
3.3 Connection cable
• To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90°C or
higher. Speak to your local Service
3.4 Electrical connection
Install the hob with a socket supply line.
If there is no socket supply line, the fixed
home electrical system must include an
isolating device with at least a 3 mmcontact separation to enable a
simultaneous and all-pole cut off from
the mains (according to NIN SEV 1000).
• The hob is supplied with a connection
L1 L2
3.5 Assembly
R 5mm
490+1mm 560+1mm
28 mm
min. 60mm
12 mm
If the appliance is installed
above a drawer, the hob
ventilation can warm up the
items stored in the drawer
during the cooking process.
4.1 Cooking surface layout
180 mm
180 mm
210 mm
145 mm
1 Induction cooking zone
2 Control panel
4.2 Control panel layout
2 3
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor Function
To activate and deactivate the hob.
Lock / Child Safety Device
To lock / unlock the control panel.
To activate and deactivate the function.
Heat setting display
To show the heat setting.
Timer indicators of cooking To show for which zone you set the time.
Timer display
To show the time in minutes.
To select the cooking zone.
To increase or decrease the time.
To set a heat setting.
To activate the function.
4.3 Heat setting displays
The cooking zone is deactivated.
The cooking zone operates.
The dot means a change by half of a heating level.
Pause operates.
Automatic Heat Up operates.
PowerBoost operates.
+ digit
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / Child Safety Device operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
4.4 Residual heat indicator
There is a risk of burns
from residual heat.
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
Refer to Safety chapters.
5.1 Activating and
for 1 second to activate or
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
comes on and the cooking
zone deactivates automatically after 2
• you do not deactivate a cooking zone
or change the heat setting. After
some time
comes on and the hob
The relation between the heat setting
and the time after which the hob
Heat setting
The hob deactivates after
6 hours
5 hours
4 hours
1.5 hour
5.3 The heat setting
to increase the heat setting.
to decrease the heat setting.
To activate the function or change the
at the same time to
deactivate the cooking zone.
5.4 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function for a cooking
comes on).
Immediately touch
time: touch
of the timer to set
the time (00 - 99 minutes). When the
indicator of the cooking zone starts to
flash slowly the time counts down.
To see the remaining time: set the
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
To deactivate the function: set the
To activate the function the
cooking zone must be cold.
zone: touch
cooking zone with
and touch . The
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
comes on).
Immediately touch
until the correct
heat setting comes on. After 3 seconds
comes on.
To stop the sound: touch
To deactivate the function: touch
5.5 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical data”
comes on.
To deactivate the function: touch
heat setting display shows
To activate the function: touch
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To deactivate the function: touch
and then touch . The remaining time
counts back to 00
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
of the timer to set the
time. When the time comes to an end,
the sound operates and 00 flashes.
The function has no effect
on the operation of the
cooking zones.
5.6 Timer
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
To stop the sound: touch
To activate the function for a cooking
zone: touch
5.7 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are
The function does not stop the timer
to activate the function.
comes on. The heat setting is lowered
to 1.
To deactivate the function, touch
previous heat setting comes on.
. The
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
the function
5.8 Lock
5.10 Power management
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones alternates between
the chosen heat setting and the
reduced heat setting. After some time
the heat setting display of the
reduced zones stays on the reduced
heat setting.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds. The Timer stays
To deactivate the function: touch .
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
5.9 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
. Do not set the heat setting.
for 4 seconds.
comes on.
Deactivate the hob with
To deactivate the function: activate the
hob with
. Do not set the heat setting.
for 4 seconds.
comes on.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
for 4 seconds.
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Refer to "Technical data".
Use the induction cooking
zones with suitable
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
Ensure pan bases are clean
and dry before placing on
the hob surface.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a diameter smaller than
the minimum receives only a part of the
power generated by the cooking zone.
Heat setting
6.2 The noises during
If you can hear:
• crack noise: cookware is made of
different materials (sandwich
• whistle sound: you use the cooking
zone with high power level and the
cookware is made of different
materials (sandwich construction).
• humming: you use high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to hob malfunction.
6.3 Examples of cooking
The correlation between the heat setting
of a zone and its consumption of power
is not linear. When you increase the heat
setting, it is not proportional to the
increase of the consumption of power. It
means that a cooking zone with the
medium heat setting uses less than a half
of its power.
The data in the table is for
guidance only.
Use to:
Keep cooked food warm.
as necessary
Put a lid on the cookware.
1 - 2.
Hollandaise sauce, melt: butter, chocolate, gelatine.
5 - 25
Mix from time to time.
1 - 2.
Solidify: fluffy omelettes,
baked eggs.
10 - 40
Cook with a lid on.
2. - 3.
Simmer rice and milkbased
dishes, heat up ready-cooked
25 - 50
Add at least twice as much liquid as rice, mix milk dishes
halfway through the procedure.
Heat setting
Use to:
3. - 4.
Steam vegetables, fish, meat.
20 - 45
Add a couple of tablespoons
of liquid.
4. - 5.
Steam potatoes.
20 - 60
Use max. ¼ l of water for 750 g
of potatoes.
4. - 5.
Cook larger quantities of food, 60 - 150
stews and soups.
Up to 3 l of liquid plus ingredients.
5. - 7
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts.
as necessary
Turn halfway through.
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. PowerBoost is activated.
Refer to Safety chapters.
7.1 General information
• Clean the hob after each use.
• Always use cookware with a clean
• Scratches or dark stains on the surface
have no effect on how the hob
• Use a special cleaner suitable for the
surface of the hob.
• Use a special scraper for the glass.
7.2 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
Refer to Safety chapters.
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
8.1 What to do if...
Possible cause
You cannot activate or oper- The hob is not connected to
ate the hob.
an electrical supply or it is
connected incorrectly.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a qualified electrician.
You do not set the heat setting for 10 seconds.
Activate the hob again and
set the heat setting in less
than 10 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
Pause operates.
Refer to "Daily use".
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
You put something on one
and the hob deactivates.
or more sensor fields.
An acoustic signal sounds
when the hob is deactivated.
Remove the object from the
sensor fields.
The hob deactivates.
Remove the object from the
sensor field.
You put something on the
sensor field
Residual heat indicator does
not come on.
The zone is not hot because
it operated only for a short
time or the sensor is damaged.
Automatic Heat Up does not The zone is hot.
If the zone operated sufficiently long to be hot, speak
to an Authorised Service
Let the zone become sufficiently cool.
The highest heat setting is
The highest heat setting has
the same power as the function.
The heat setting changes
between two levels.
Power management operates.
Refer to "Daily use".
The sensor fields become
The cookware is too large or Put large cookware on the
you put it too near to the
rear zones if possible.
comes on.
Child Safety Device or Lock
Refer to "Daily use".
comes on.
and a number come on.
Possible cause
There is no cookware on the
Put cookware on the zone.
The cookware is unsuitable.
Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions. Refer to "Technical data".
There is an error in the hob.
Deactivate the hob and activate it again after 30 seconds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem continues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise.
The electrical connection is
8.2 If you cannot find a
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
Disconnect the hob from the
electrical supply. Ask a qualified electrician to check the
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
9.1 Rating plate
Model KFA58SIM
Typ 61 B4A 00 AA
Induction 7.35 kW
Ser.Nr. .................
PNC 949 597 403 00
220 - 240 V 50 - 60 Hz
Made in Germany
7.35 kW
9.2 Cooking zones specification
Cooking zone
Nominal power PowerBoost
(maximum heat [W]
setting) [W]
Cookware diammaximum dura- eter [mm]
tion [min]
Left front
180 - 210
Left rear
145 - 180
Right front
125 - 145
Right rear
145 - 180
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the
For optimal cooking results use
cookware no larger than the diameter in
the table.
10.1 Product information according to EU 66/2014
Model identification
Type of hob
Built-In Hob
Number of cooking zones
Heating technology
Diameter of circular cooking zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
18.0 cm
14.5 cm
18.0 cm
Energy consumption per
cooking zone (EC electric
Left front
Left rear
Right front
Right rear
178.4 Wh / kg
184.9 Wh / kg
183.2 Wh / kg
184.9 Wh / kg
Energy consumption of the
hob (EC electric hob)
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
10.2 Energy saving
You can save energy during everyday
cooking if you follow below hints.
• When you heat up water, use only the
amount you need.
182.9 Wh / kg
• If it is possible, always put the lids on
the cookware.
• Before you activate the cooking zone
put the cookware on it.
• Put the smaller cookware on the
smaller cooking zones.
• Put the cookware directly in the
centre of the cooking zone.
• Use the residual heat to keep the
food warm or to melt it.
Customer Service Centres
Point of Service
Industriestrasse 10
5506 Mägenwil
Le Trési 6
1028 Préverenges
Via Violino 11
6928 Manno
Morgenstrasse 131
3018 Bern
Langgasse 10
9008 St. Gallen
Seetalstrasse 11
6020 Emmenbrücke
Schlossstrasse 1
4133 Pratteln
Comercialstrasse 19
7000 Chur
Spare parts service Industriestrasse 10,
5506 Mägenwil, Tel. 0848 848 111
Specialist advice/Sale Badenerstrasse
587, 8048 Zürich, Tel. 044 405 81 11
Warranty For each product we provide a
two-year guarantee from the date of
purchase or delivery to the consumer
(with a guarantee certificate, invoice or
sales receipt serving as proof). The
guarantee covers the costs of materials,
labour and travel. The guarantee will
lapse if the operating instructions and
conditions of use are not adhered to, if
the product is incorrectly installed, or in
the event of damage caused by external
influences, force majeure, intervention by
third parties or the use of non-genuine
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
For Switzerland:
Where should you take your
old equipment?
Anywhere that sells new
equipment or hand it in to
official SENS collection
points or official SENS
recycling firms.
The list of official SENS
collection points can be
found at
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF