Samsung C27F391FHM User guide 45 Pages
Samsung C27F391FHM User guide
Samsung C27F391FHM is a curved monitor with a screen size of 27 inches and a resolution of 1920 x 1080 pixels. It has a response time of 4ms and a refresh rate of 60Hz. The monitor also features AMD FreeSync technology, which helps to reduce screen tearing and stuttering. Additionally, the monitor has a built-in Eye Saver Mode, which helps to reduce eye strain.
advertisement
▼
Scroll to page 2
of
45
USER MANUAL Curved Monitor C22F390FH* C22F392FH* C24F390FH* C24F392FH* C24F394FH* C24F396FH* C24F399FH* C27F390FH* C27F391FH* C27F396FH* C27F397FH* C27F398FW* C32F391FW* C32F395FW* C32F397FW* The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. (For India Only) This product is RoHS compliant. The contents of this manual are subject to change without notice to improve quality. © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners. For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282. Table of contents Before Using the Product Securing the Installation Space Precautions for storage 4 4 Safety Precautions Cleaning Electricity and Safety Installation Operation 5 5 5 6 7 Preparations Parts Control Panel Direct Key guide Function Key Guide Changing Brightness, Contrast and Sharpness settings Changing the Volume setting Reverse Side Adjusting the Product Tilt Anti-theft Lock Precautions for moving the monitor Installing the Wall Mount (Not for C27F397FH* / C32F397FW* models) Wall Mount Kit Specifications (VESA) (Not for C27F397FH* / C32F397FW* models) 9 9 10 11 13 13 14 15 16 17 18 18 Installation 19 Attaching the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* / 19 C32F391FW*) Attaching the Stand (C24F396FH* / C27F396FH* / C27F397FH* / C27F398FW* / C32F395FW* / C32F397FW*) 20 Removing the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* / C32F391FW*) 21 Removing the Stand (C24F396FH* / C27F396FH* / C27F397FH* / C27F398FW* / C32F395FW* / 22 C32F397FW*) Connecting and Using a Source Device Pre-connection Checkpoints 23 Connecting and Using a PC 23 Connection Using the D-SUB Cable (Analog Type) 23 Connection Using the HDMI or HDMI-DVI Cable 24 Connection Using an DP Cable 24 Connecting to Headphones 25 Connecting the Power 26 Correct posture to use the product 27 Driver Installation 27 Setting Optimum Resolution 27 Screen Setup SAMSUNG MAGIC Bright 28 Brightness 29 Contrast 29 Sharpness 29 Color 29 SAMSUNG MAGIC Upscale 30 HDMI Black Level 30 Eye Saver Mode 30 Game Mode 30 Response Time 30 Picture Size 31 Screen Adjustment 31 Adjusting OSD (On Screen Display) settings Transparency 32 Position 32 Language 32 Display Time 32 2 Table of contents Setup and Reset Troubleshooting Guide FreeSync 33 Requirements Before Contacting Samsung Customer Service Center 38 Testing the Product 38 Checking the Resolution and Frequency 38 Check the following. 38 Eco Saving Plus 35 Off Timer 35 PC/AV Mode 35 Source Detection 35 Key Repeat Time 35 Power LED On 36 Specifications Reset All 36 General 41 Information 36 Standard Signal Mode Table 43 Q&A Installing the Software Appendix Easy Setting Box 37 Restrictions and Problems with the Installation 37 System Requirements 37 Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others 40 45 45 45 45 3 Chapter 01 Before Using the Product Securing the Installation Space Precautions for storage Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ――The exterior may differ depending on the product. High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ――Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.) Do not press the monitor screen with hands or other objects. There is a risk of damaging the screen. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 4 Safety Precautions Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. Electricity and Safety Warning •• Do not use a damaged power cord or plug, or a loose power socket. •• Do not use multiple products with a single power socket. •• Do not touch the power plug with wet hands. •• Insert the power plug all the way in so it is not loose. Cleaning •• Connect the power plug to a grounded power socket (type 1 insulated devices only). ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. •• Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object. ――Take the following steps when cleaning. •• Do not place the power cord or product near heat sources. 1 •• Clean any dust around the pins of the power plug or the power socket with a dry cloth. Power off the product and computer. 2 Disconnect the power cord from the product. ――Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3 Wipe the monitor with a clean, soft and dry cloth. Caution •• Do not disconnect the power cord while the product is being used. ‒‒ Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor. •• Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. ‒‒ Do not spray water or detergent directly on the product. •• Keep the power socket where the power cord is connected unobstructed. 4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product. 5 Connect the power cord to the product when cleaning is finished. ‒‒ The power cord must be disconnected to cut off power to the product when an issue occurs. •• Hold the plug when disconnecting the power cord from the power socket. 6 Power on the product and computer. 5 Installation Warning Caution •• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• Do not drop the product while moving. •• Do not install the product in poorly ventilated spaces such as a bookcase or closet. •• Install the product at least 10cm away from the wall to allow ventilation. •• Keep the plastic packaging out of the reach of children. ‒‒ Children may suffocate. •• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) ‒‒ The product may fall and become damaged and/or cause an injury. ‒‒ Using the product in an area with excess vibration may damage the product or cause a fire. •• Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. •• Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒‒ The product lifespan may be reduced or a fire may result. •• Do not set down the product on its front. •• When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding. ‒‒ The product may fall and become damaged and/or cause an injury. ‒‒ Install the product only on cabinets or shelves of the right size. •• Set down the product gently. ‒‒ Product failure or personal injury may result. •• Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance. ‒‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a place. •• Do not install the product within the reach of young children. ‒‒ The product may fall and injure children. •• Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil pollution. And do not install or use the product in the kitchen or near the kitchen stove. 6 Operation Warning •• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒‒ Contact Samsung Customer Service Center for repairs. •• To move the product, first disconnect all the cables from it, including the power cable. •• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center. •• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches, etc) into the product (via the vent or input/output ports, etc). ‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. •• Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product. ‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. •• Do not let children hang from the product or climb on top of it. ‒‒ Children may become injured or seriously harmed. •• If the product is dropped or the outer case is damaged, turn off the power and disconnect the power cord. Then contact Samsung Customer Service Center. ‒‒ Continued use can result in a fire or electric shock. •• Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product. ‒‒ The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. •• During a lightning or thunderstorm, power off the product and remove the power cable. •• Do not drop objects on the product or apply impact. •• Do not move the product by pulling the power cord or any cable. •• If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately. •• Do not lift or move the product by pulling the power cord or any cable. •• Do not use or keep combustible spray or an inflammable substance near the product. •• Ensure the vents are not blocked by tablecloths or curtains. ‒‒ An increased internal temperature may cause a fire. 7 Caution •• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. •• Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. ‒‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. •• Store small accessories out of the reach of children. •• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc). ‒‒ Your hand or finger may get stuck and injured. ‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage. •• Use the product at the recommended resolution and frequency. ‒‒ Your eyesight may deteriorate. •• Do not put AC/DC adapters together. •• Remove the plastic bag from the AC/DC adapter before you use it. •• Exercise caution when adjusting the product angle or stand height. ‒‒ Tilting the product at an excessive angle may cause the product to fall and an injury may result. •• Do not place heavy objects on the product. ‒‒ Product failure or personal injury may result. •• When using headphones or earphones, do not turn the volume too high. ‒‒ Having the sound too loud may damage your hearing. •• Do not let water enter the AC/DC adapter device or get the device wet. ‒‒ An electric shock or fire may result. ‒‒ Avoid using the product outdoors where it can be exposed to rain or snow. ‒‒ Be careful not to get the AC/DC adapter wet when you wash the floor. •• Do not put the AC/DC adapter near to any heating apparatus. ‒‒ Otherwise, a fire may result. •• Keep the AC/DC adapter in a well-ventilated area. •• If you place the AC/DC power adapter so that it is hanging with the cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction. Make sure to rest the AC/DC power adapter flat on a table or the floor. •• Do not hold the product upside-down or move it by holding the stand. ‒‒ The product may fall and become damaged or cause an injury. •• Looking at the screen too close for an extended period of time can deteriorate your eyesight. •• Do not use humidifiers or stoves around the product. •• Rest your eyes for more than 5 minutes for every 1 hour of product use. 8 Chapter 02 Preparations Parts Icons Description JOG Button Multi directional button that helps navigate. ――The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ――The color and shape of parts may differ from what is shown. Specifications are subject to change •• Power On (Power button): Off without notice to improve quality. C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* Power LED •• Power saving mode: Blinking •• Power Off (Power button): On ――The power Indicator operation can be swapped by changing in C24F396FH* / C27F396FH* / C27F397FH* the menu. (System Power LED On) Actual models because of functional variation maybe haven’t this function. UP LEFT RIGHT Function Key Guide Press the JOG button when the screen is turned on. The Function Key Guide will appear. To access the onscreen menu when the guide is displayed, press the corresponding direction button again. ――Function Key Guide may vary depending on the function or PRESS(ENTER) Power LED C27F398FW* / C32F395FW* / C32F397FW* Power LED DOWN product model. Please refer to the actual product. JOG Button C32F391FW* Return Function Key Guide 9 Direct Key guide ――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ――The function buttons page shows if Eye Saver Mode is enabled. : On : Off HDMI / DisplayPort mode Analog mode Brightness Brightness Auto Adjustment Volume Features Features Eye Saver Mode Off ――Analog mode option •• / : Adjust Brightness, Contrast, Sharpness. •• : Auto Adjustment. ――Changing the resolution in Display Properties will activate the Auto Adjustment function. ――This function is only available in Analog mode. •• Eye Saver Mode Off ――HDMI / DisplayPort mode option •• / : Adjust Brightness, Contrast, Sharpness. •• : Adjust Volume, Mute. •• : Display Function Key Guide. : Display Function Key Guide. 10 Function Key Guide ――To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied. Return Icons Description Selects to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has been changed. Selects by moving the JOG button in the function key guide screen. The OSD (On Screen Display) of your Monitor’s feature appears. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable/Disable: To lock/unlock the OSD control, press the LEFT button for 10 seconds when the main menu displayed. ――If the OSD control is locked, Brightness and Contrast can be adjusted. Eye Saver Mode is available. System FreeSync, Power LED On is available. Information can be viewed. Selects by moving the JOG button in the function key guide screen. Press to enable or disable Eye Saver Mode. The items below are not available if the Eye Saver Mode function is enable. •• Picture •• System Selects Bright, Brightness, Color, Game Mode Eco Saving Plus to turn the Monitor off by moving the JOG button in the function key guide screen. ――Actual models because of functional variation, Function key guide options will be different. 11 When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode UP Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below. JOG Button Action UP/DOWN Move the option Exit the Main menu. LEFT Close Sublist without saving value. Value decreases in the slider. RIGHT PRESS(ENTER) Move to next depth. Value increases in the slider. Move to next depth. Save the value and close Sublist. 12 Changing Brightness, Contrast and Sharpness settings Changing the Volume setting You can adjust Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed. You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed. Sharpness 100 Brightness This function is only available in HDMI / DisplayPort mode. 50 Volume Mute Contrast ――The displayed image may differ depending on the model. ――The default brightness can vary depending on the region. Brightness ――This menu is not available when Bright is set to Dynamic Contrast mode. ――This menu is not available when Eco Saving Plus is enabled. ――This menu is not available when Eye Saver Mode is enabled. Contrast ――The displayed image may differ depending on the model. ――If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the product. ――What is Auto Mute? The function mutes the audio to improve sound effect when there is sound noise or when the input signal is weak, usually due to a problem with the volume of an input device. ――To activate the Mute function, access the Volume control screen, then use the JOG button to move the ――This menu is not available when Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease the Volume. Sharpness ――This menu is not available when Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Upscale is in Mode1 or Mode2 mode. ――This menu is not available when Game Mode is enabled. 13 Reverse Side ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* Port C24F396FH* / C27F396FH* / C27F397FH* Description C27F398FW* / C32F395FW* / C32F397FW* Port C32F391FW* Description Connects to a source device using an HDMI cable or HDMI-DVI cable. Connect to an audio output device such as headphones. Connect to a PC using the D-SUB cable. Connects to the AC/DC adapter. Connects to a PC using a DP cable. 14 Adjusting the Product Tilt ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* / C32F391FW* -2.0° (±2.0°) ~ 22.0° (±2.0°) C24F396FH* / C27F396FH* / C27F397FH* / C27F398FW* / C32F395FW* / C32F397FW* -2.0° (±2.0°) ~ 22.0° (±2.0°) •• You can adjust the product tilt. •• Hold the lower part of the product and adjust the tilt carefully. 15 Anti-theft Lock ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* C24F396FH* / C27F396FH* C27F397FH* C27F398FW* / C32F395FW* C32F391FW* C32F397FW* 1 Fix the cable of your anti-theft locking device to a heavy object such as a desk. 2 Put one end of the cable through the loop on the other end. 3 Insert the locking device into the anti-theft lock slot at the back of the product. 4 Lock the locking device. ‒‒ An anti-theft locking device can be purchased separately. ‒‒ Refer to the user guide provided with your anti-theft locking device for details. ‒‒ Anti-theft locking devices can be purchased at electronics retailers or online. 16 Precautions for moving the monitor Do not directly apply pressure on the screen. Do not hold the screen when moving the monitor. Hold the lower part of the monitor when moving it. 17 Installing the Wall Mount (Not for C27F397FH* / C32F397FW* models) Wall Mount Kit Specifications (VESA) (Not for C27F397FH* / C32F397FW* models) ――Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. Installing the Wall Mount Kit The wall mount kit allows you to mount the product on the wall. Purchase a compatible wall-mount kit to use with the product. For detailed information on installing the wall mount, see the instructions provided with the wall mount. •• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the product. We recommend you contact a technician for assistance when installing the wall mount bracket. •• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own. •• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. •• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. •• Do not mount the product at more than a 15 degree tilt. •• Standard dimensions for wall mount kits are shown in the table below. Unit: mm Model name CF39* SERIES (Not for C27F397FH* / C32F397FW* models) VESA screw hole specs (A * B) Standard Screw in millimeters 75.0 x 75.0 M4 Quantity 4 ――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock. 18 Installation Attaching the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* / C32F391FW*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : T he product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. ――The exterior may differ depending on the product. 1 Insert the stand neck into the stand base in the direction shown in the figure. - Caution Do not hold the product upside down only by the stand. Check that the stand neck is firmly connected. 2 Tightly fasten the connecting screw at the bottom of the stand base. 3 Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image. - Caution Do not press down on the monitor. There is a risk of damaging the monitor. If Styrofoam is unavailable, use a thick sitting mat. Hold the back of the monitor as shown in the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure. 19 Attaching the Stand (C24F396FH* / C27F396FH* / C27F397FH* / C27F398FW* / C32F395FW* / C32F397FW*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : T he product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. ――The exterior may differ depending on the product. 1 Insert the stand neck into the stand base in the direction shown in the figure. - Caution Do not hold the product upside down only by the stand. Check that the stand neck is firmly connected. 2 Tightly fasten the connecting screw at the bottom of the stand base. 3 Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image. - Caution Do not press down on the monitor. There is a risk of damaging the monitor. If Styrofoam is unavailable, use a thick sitting mat. Hold the back of the monitor as shown in the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure. 20 Removing the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* / C32F391FW*) ――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : T he product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. ――The exterior may differ depending on the product. 1 Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image. - Caution Do not press down on the monitor. There is a risk of damaging the monitor. If Styrofoam is unavailable, use a thick sitting mat. While holding the monitor with one hand, pull the stand neck with your other hand to in detach the stand as shown in the figure. 2 Turn the connecting screw at the bottom of the stand base to separate it. 3 Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure. 21 Removing the Stand (C24F396FH* / C27F396FH* / C27F397FH* / C27F398FW* / C32F395FW* / C32F397FW*) ――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : T he product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. ――The exterior may differ depending on the product. 1 Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image. - Caution Do not press down on the monitor. There is a risk of damaging the monitor. If Styrofoam is unavailable, use a thick sitting mat. While holding the monitor with one hand, pull the stand neck with your other hand to in detach the stand as shown in the figure. 2 Turn the connecting screw at the bottom of the stand base to separate it. 3 Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure. 22 Chapter 03 Connecting and Using a Source Device Pre-connection Checkpoints ――Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. ――Do not connect the power cable before connecting all other cables. Connecting and Using a PC Select a connection method suitable for your PC. ――Connecting parts may differ in different products. ――Provided ports may vary depending on the product. Ensure you connect a source device first before connecting the power cable. Connecting the power cable during connection may damage the product. ――Check the types of ports at the back of the product you want to connect. Connection Using the D-SUB Cable (Analog Type) C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* RGB IN C24F396FH* / C27F396FH* / C27F397FH* 23 Connection Using the HDMI or HDMI-DVI Cable C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* Connection Using an DP Cable C27F398FW* / C32F395FW* / C32F397FW* DP IN C24F396FH* / C27F396FH* / C27F397FH* C32F391FW* HDMI IN C27F398FW* / C32F395FW* / C32F397FW* ――A DP cable shorter under 1.5m in length is recommended. Using a cable longer than 1.5m can affect the picture quality. C32F391FW* ――The audio function is not supported if the source device is connected using the HDMI-DVI cable. 24 Connecting to Headphones C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* C24F396FH* / C27F396FH* / C27F397FH* C27F398FW* / C32F395FW* / C32F397FW* C32F391FW* ――The sound could only be heard when using the HDMI to HDMI or DP cable. 25 Connecting the Power Optional Optional C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* 1 C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* C24F396FH* / C27F396FH* / C27F397FH* C27F398FW* / C32F395FW* / C32F397FW* C32F391FW* 1 2 C24F396FH* / C27F396FH* / C27F397FH* 2 3 3 4 C27F398FW* / C32F395FW* / C32F397FW* 1 Connect the power plug to the AC/DC adapter. (Optional) 2 Connect the AC/DC adapter cable to the DC 14V port on the back of the monitor. C32F391FW* 3 Plug the AC/DC adapter into the power outlet. 4 Press the JOG button on the back of the monitor to turn it on. ――The input voltage is switched automatically. 1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V port on the back of the product. 2 Next, connect the power cable to the power outlet. 3 Press the JOG button on the back of the monitor to turn it on. ――The input voltage is switched automatically. 26 Correct posture to use the product Driver Installation ――You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ――To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. Use the product in the correct posture as follows: •• Straighten your back. ――If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again. ――The optimum resolution can also be selected in Control Panel on your PC. •• Adjust the angle so light does not reflect on the screen. •• Keep your forearms perpendicular to your upper arms and level with the back of your hands. •• Keep your elbows at about a right angle. •• Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels attached to the floor, and your arms lower than your heart. 27 Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. SAMSUNG MAGIC Bright In PC mode This menu provides an optimum picture quality suitable for the environment where the product will be used. •• Standard: Obtain a picture quality suitable for editing documents or using Internet. •• Custom: Customize the contrast and brightness as required. ――This menu is not available when Eco Saving Plus is enabled. •• Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. •• Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment. ――This menu is not available when Game Mode is enabled. ――This menu is not available when Eye Saver Mode is enabled. In AV mode You can customize the brightness to suit your preferences. When the external input is connected through HDMI/DP and PC/AV Mode is set to AV, Bright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can select Custom which automatically recalls your personalized picture settings. Picture Custom Brightness 100 Set to an optimum picture quality suitable for the working environment. •• Dynamic: Select this mode to view a sharper image than in Standard mode. Contrast 75 Sharpness 60 •• Movie: Select this mode when the surroundings are dark. This will save power and reduce eye fatigue. Off •• Custom: Select this mode when you want to adjust the image according to your preferences. Color •• Standard: Select this mode when the surroundings are bright. This also provides a sharp image. HDMI Black Level Return ――The displayed image may differ depending on the model. 28 Brightness Color You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. A higher value will make the picture appear brighter. ――This menu is not available when ――This menu is not available when Bright is set to Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. Bright is set to Dynamic Contrast mode. ――This menu is not available when Eco Saving Plus is enabled. ――This menu is not available when Eye Saver Mode is enabled. ――This menu is not available when Eye Saver Mode is enabled. •• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color. •• Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color. •• Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color. Contrast •• Color Tone: Select a color tone that best suits your viewing needs. ‒‒ Cool 2: Set the color temperature to be cooler than Cool 1. Adjust the contrast between the objects and background. (Range: 0~100) ‒‒ Cool 1: Set the color temperature to be cooler than Normal mode. A higher value will increase the contrast to make the object appear clearer. ‒‒ Normal: Display the standard color tone. ――This option is not available when Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. ‒‒ Warm 1: Set the color temperature to be warmer than Normal mode. ‒‒ Warm 2: Set the color temperature to be warmer than Warm 1. ‒‒ Custom: Customize the color tone. ――When the external input is connected through HDMI/DP and PC/AV Mode is set to AV, Color Tone has Sharpness four color temperature settings (Cool, Normal, Warm and Custom). •• Gamma: Adjust the middle level of luminance. Make the outline of objects more clear or blurry. (Range: 0~100) ‒‒ Mode1 / Mode2 / Mode3 A higher value will make the outline of objects clearer. ――This option is not available when Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Upscale is in Mode1 or Mode2 mode. ――This menu is not available when Game Mode is enabled. 29 SAMSUNG MAGIC Upscale Upscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. ――This menu is not available when Bright is set to Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. •• Off / Mode1 / Mode2 ――Comparing with Mode1, Mode2 has a stronger effect. HDMI Black Level Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as it met the requirements of TÜV Rheinland “Low Blue Light Content” standards. Game Mode Configure the product screen settings for game mode. If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. ――This function is only available in HDMI mode. •• Normal: Select this mode when there is no contrast ratio degradation. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. ――This menu is not available when Eye Saver Mode is enabled. ――When the monitor turns off, enters power-saving mode or changes input sources, Game Mode turns Off even if it is set to On. ――If you want to keep Game Mode enabled all the time, select Always On. •• Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation. ――HDMI Black Level may not be compatible with some source devices. ――The HDMI Black Level feature is only activated at a certain AV resolution, such as 720P and 1080P. Response Time Accelerate the panel response rate to make video appear more vivid and natural. ――It is best to set Response Time to Standard or Faster when you are not viewing a movie. 30 Picture Size Screen Adjustment Change the picture size. ――This menu is available in Analog mode only. ――This option is not available when FreeSync is enabled. ――This menu is only available when Picture Size is set to Screen Fit in AV Mode. In PC mode •• Auto: Display the picture according to the aspect ratio of the input source. •• Wide: Display the picture in full screen regardless of the aspect ratio of the input source. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels. Configuring H-Position & V-Position H-Position: Move the screen to the left or right. In AV mode V-Position: Move the screen up or down. •• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. Configuring Coarse •• 16:9: Display the picture with an aspect ratio of 16:9. •• Screen Fit: Display the picture with the original aspect ratio without cutting off. ――The function may not be supported depending on the ports provided with the product. ――Changing the screen size is available when the following conditions are satisfied. Adjust the screen frequency. ――This menu is available in Analog mode only. Configuring Fine ――A digital output device is connected using the HDMI/DP cable. Fine-adjust the screen to obtain a vivid picture. ――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can ――This menu is available in Analog mode only. support all of these signals.). ――This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to AV. 31 Chapter 05 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. Transparency Position Set the transparency for the menu windows. Adjust the menu position. OnScreen Display On Transparency Position Language Display Time Configure the transparency of the menu windows. Language English Set the menu language. 20 sec ――A change to the language setting will only be applied to the onscreen menu display. ――It will not be applied to other functions on your PC. Return ――The displayed image may differ depending on the model. Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 32 Chapter 06 Setup and Reset A detailed description of each function is provided. Refer to your product for details. FreeSync System FreeSync Off C32F391FW* / C32F395FW* / C32F397FW* models are not supported. Eco Saving Plus Off FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. Off Timer This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. PC/AV Mode FreeSync is only available in HDMI or DisplayPort mode. Source Detection Auto •• Off: Disable FreeSync. Key Repeat Time Acceleration •• Standard Engine: Enable the basic FreeSync functions of the AMD graphics card. Power LED On •• Ultimate Engine: Enable the FreeSync feature with a higher screen frame rate. Screen tearing (abnormal sync between the screen and content) is reduced in this mode. Note that screen flickering may occur during game play. When enable FreeSync function, please use maximum screen refresh rate for optimal freesync effect. The refresh rate setting method please refer to Q & A How can I change the frequency? ――When using the FreeSync function, use the HDMI/DP cable provided by the monitor manufacturer. Stand-by FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. FreeSync can be operated when you use AMD's graphic card with supporting Freesync solution. Return ――The displayed image may differ depending on the model. If the FreeSync function is enabled, the following may occur: •• The screen may flicker when you play games depending on the game option settings. Decreasing the game setting values might help to remove the flicker. Installing the latest drivers from the AMD website may also fix this issue. •• The response rate during the game may fluctuate depending on the resolution. A higher resolution generally decreases the response rate. •• The sound quality of the monitor may be degraded. ――If you encounter any issues when using the function, contact the Samsung Service Center. 33 The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. ――For additional AMD graphics card models that support the FreeSync feature, visit the official AMD website. ――Select FreeSync Off if you are using a graphics card from a different manufacturer. •• AMD Radeon R9 300 Series •• AMD Radeon R9 290 •• AMD Radeon R9 Fury X •• AMD Radeon R9 285 •• AMD Radeon R7 360 •• AMD Radeon R7 260X •• AMD Radeon R9 295X2 •• AMD Radeon R7 260 •• AMD Radeon R9 290X How do you enable FreeSync? 1 Set FreeSync to Standard Engine or Ultimate Engine in the OSD menu. 2 Enable FreeSync in AMD Radeon Settings: Right-click the mouse AMD Radeon Settings Display The "AMD FreeSync" feature should be set to "On". Select to "On" if not already enabled. 34 Eco Saving Plus PC/AV Mode Reduce energy consumption compared to consumption at the maximum brightness level. Set PC/AV Mode to AV. The picture size will be enlarged. ――This option is not available when This option is useful when you view a movie. Bright is in Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. ――This menu is not available when Eye Saver Mode is enabled. •• Set to PC when connected to a PC. •• Set to AV when connected to an AV device. •• Off: Deactivate the Eco Saving Plus function. ――This function does not support Analog mode. •• Auto: The power consumption will automatically be reduced by about 10% over the current setting. ――Supplied for the wide models only such as 16:9 or 16:10. (The reduction of power consumption depends on the customer screen brightness condition.) •• Low: Saves up to 25 % energy compared to the maximum brightness. •• High: Saves up to 50 % energy compared to the maximum brightness. Off Timer Off Timer: Turn on Off Timer mode. Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. ――This option is only available when Off Timer is set to On. ――If the monitor is in HDMI/DisplayPort mode and the screen says Check Signal Cable or power saving mode activates, press the JOG button to display the function-button screen and then select the can select PC or AV. icon. You Source Detection Select either Auto or Manual as the method to recognize input signal. Key Repeat Time ――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to MENU System and set Off Timer to Off. Control the response rate of a button when the button is pressed. Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed. 35 Power LED On Information Configure the settings to enable or disable the power LED located at the lower part of the product. View the current input source, frequency and resolution. •• Working: The power LED is on when the product is turned on. •• Stand-by: The power LED is on when the product is turned off. Picture OnScreen Display Reset All Return all the settings for the product to the default factory settings. System Information Information LC************ S/N:*************** HDMI **kHz **Hz ** ****x**** Optimal Mode ****x**** **Hz Exit ――The displayed image may differ depending on the model. 36 Chapter 07 Installing the Software Easy Setting Box System Requirements OS Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at http://www.samsung.com. ――The software may not work properly if you do not restart the computer after the installation. Hardware •• Windows XP 32Bit/64Bit •• At least 32MB of memory •• Windows Vista 32Bit/64Bit •• At least 60MB of free space on the hard disk drive •• Windows 7 32Bit/64Bit •• Windows 8 32Bit/64Bit •• Windows 8.1 32Bit/64Bit •• Windows 10 32Bit/64Bit ――The Easy Setting Box icon may not appear depending on the computer system and the product specifications. ――If the shortcut icon does not appear, press the F5 key. Restrictions and Problems with the Installation The Easy Setting Box installation may be affected by the Graphics Card, Motherboard and the Networking Environment. 37 Chapter 08 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center ――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check the following. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. Testing the Product Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test. 1 Power off both the PC and product. 2 Disconnect the cables from the product. 3 Power on the product. 4 If the message Check Signal Cable appears, the product is working normally. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the screen have nothing to do with the product. Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the screen size in the HDMI or DVI settings for the graphics card. If the graphics card settings menu does not have an option to adjust the screen size, update the graphics card driver to the latest version. (Please contact the graphics card or computer manufacturer for further details about how to adjust the screen settings.) ――If the screen remains blank, check the PC system, video controller and cable. Checking the Resolution and Frequency For a mode that exceeds the supported resolution(refer to Standard Signal Mode Table), the message Not Optimum Mode will appear for a short time. ――The displayed resolution may vary, depending on the computer system settings and cables. Screen issue The power LED is off. The screen will not switch on. Check that the power cable is connected properly. The message Check Signal Cable appears. Check that the cable is properly connected to the product. Check that the device connected to the product is powered on. 38 Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product. Playback of high-definition large video files can be choppy. This may be because the video player is not optimized for the computer resource. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (P.43). Try playing the file on another video player. The images on the screen look distorted. Check the cable connection to the product. Sound issue The screen is not clear. The screen is blurry. There is no sound. Adjust Coarse and Fine. Check the connection of the audio cable or adjust the volume. Remove any accessories (video extension cable, etc.) and try again. Check the volume. Set the resolution and frequency to the recommended level. The volume is too low. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Adjust the volume. Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode Table (P.43) in this manual and the Information menu on the product. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software Program. The screen is too bright. The screen is too dark. Adjust Brightness and Contrast. Video is available but there is no sound. Sound cannot be heard if a HDMI-DVI cable is used to connect the input device. Connect the device using an HDMI cable or a DP cable. Screen color is inconsistent. Change the Color settings. The colors on the screen have a shadow and are distorted. Source device issue Change the Color settings. A beeping sound is heard when my PC is booting. White does not really look white. If a beeping sound is heard when your PC is booting, have your PC serviced. Change the Color settings. There is no image on the screen and the power LED blinks every 0.5 to 1 second. The product is operating in power-saving mode. Press any key on the keyboard or move the mouse to return to normal operating mode. Text is blurry. If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel Fonts Adjust ClearType text and change Turn on ClearType. 39 Q&A ――Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. •• Windows XP: Go to Control Panel Appearance and Themes •• Windows ME/2000: Go to Control Panel System Control Panel Display Settings Advanced Appearance and Personalization •• Windows 8(Windows 8.1): Go to Settings settings. •• Windows 10: Go to Settings Settings Appearance and Personalization •• Windows Vista: Go to Control Panel •• Windows 7: Go to Control Panel Display Display Advanced Monitor, and adjust Refresh rate under Monitor settings. Monitor, and adjust Refresh rate under Monitor settings. Personalization Display Display Settings Screen Resolution Appearance and Personalization Advanced display settings Advanced Settings Advanced settings Display Monitor, and adjust Refresh rate under Monitor settings. Screen Resolution Display adapter properties Monitor, and adjust Refresh rate under Monitor settings. Advanced settings Monitor, and adjust Refresh rate under Monitor Monitor, and adjust Screen refresh rate under Monitor settings. How can I change the resolution? •• Windows XP: Go to Control Panel Appearance and Themes •• Windows ME/2000: Go to Control Panel •• Windows Vista: Go to Control Panel •• Windows 7: Go to Control Panel Appearance and Personalization System Settings, and adjust the resolution. Settings, and adjust the resolution. Appearance and Personalization •• Windows 8(Windows 8.1): Go to Settings •• Windows 10: Go to Settings Display Display Control Panel Display Personalize Display Display Settings, and adjust the resolution. Adjust Resolution, and adjust the resolution. Appearance and Personalization Display Adjust Resolution, and adjust the resolution. Advanced display settings, and adjust the resolution. How do I set power-saving mode? •• Windows XP: Set power-saving mode in Control Panel Appearance and Themes •• Windows ME/2000: Set power-saving mode in Control Panel •• Windows Vista: Set power-saving mode in Control Panel •• Windows 7: Set power-saving mode in Control Panel Appearance and Personalization Control Panel Personalization Screen Saver Settings Screen Saver Settings Appearance and Personalization •• Windows 8(Windows 8.1): Set power-saving mode in Settings •• Windows 10: Set power-saving mode in Settings Display Display Power options or BIOS SETUP on the PC. Personalize Personalize Screen Saver Settings Screen Saver Settings Appearance and Personalization Lock screen Power options or BIOS SETUP on the PC. Screen timeout settings Personalize Power options or BIOS SETUP on the PC. Power options or BIOS SETUP on the PC. Screen Saver Settings Power options or BIOS SETUP on the PC. Power & sleep or BIOS SETUP on the PC. 40 Chapter 09 Specifications General Model Name C22F390FH* / C22F392FH* C24F390FH* / C24F392FH* / C24F394FH* / C24F396FH* / C24F399FH* C27F390FH* / C27F391FH* / C27F396FH* / C27F397FH* / C27F398FW* C32F391FW* / C32F395FW* / C32F397FW* Size 54.6 cm 59.8 cm 68.5 cm 80.1 cm Display area 476.64 mm (H) x 268.11 mm (V) 521.40 mm (H) x 293.28 mm (V) 596.736 mm (H) x 335.664 mm (V) 698.40 mm (H) x 392.85 mm (V) Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) 0.27156 mm (H) x 0.27156 mm (V) 0.3114 mm (H) x 0.3114 mm (V) 0.36375 mm (H) x 0.36375 mm (V) Maximum Pixel Clock 148.5 MHz (Analog, HDMI) 148.5 MHz (HDMI, DisplayPort) -Applicable only to models C27F398FW*, C32F391FW*, C32F395FW*, C32F397FW* Power Supply AC100-240V~ 50/60Hz Based on the AC voltage of the adapter. For the DC voltage of the product, refer to the product label. Signal connectors D-SUB, HDMI HDMI, DisplayPort (Applicable only to models C27F398FW*, C32F391FW*, C32F395FW*, C32F397FW*) Environmental conditions Operating Temperature: 10 C – 40 C (50 F – 104 F) / Humidity: 10 % – 80 %, non-condensing Storage Temperature: -20 C – 45 C (-4 F – 113 F) / Humidity: 5 % – 95 %, non-condensing 41 ――Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. ――Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. ――The above specifications are subject to change without notice to improve quality. ――This device is a Class B digital apparatus. ――For detailed device specifications, visit the Samsung Electronics website. 42 Standard Signal Mode Table Model Name Synchronization Resolution C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F396FH* / C24F399FH* / C27F390FH* / C27F391FH* / C27F396FH* / C27F397FH* / C27F398FW* C32F391FW* / C32F395FW* / C32F397FW* Horizontal Frequency 30 – 81 kHz 30 – 81 kHz Vertical Frequency 56 – 72 Hz 56 – 61 Hz Optimum resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual. C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F396FH* / C24F399FH* / C27F390FH* / C27F391FH* / C27F396FH* / C27F397FH* / C27F398FW* Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ 43 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900 RB 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.500 +/+ C32F391FW* / C32F395FW* / C32F397FW* Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900 RB 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080p 67.500 60.000 148.500 +/+ ――Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. ――Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz. ――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product. ――Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor. If the LCD monitor does not support 85 Hz, change the vertical frequency to 60 Hz using the CDT monitor before you exchange it with the LCD monitor. 44 Chapter 10 Appendix Responsibility for the Pay Service (Cost to Customers) A Product damage caused by customer's fault ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service •• External impact or drop. technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. Product damage caused by customer's mishandling or wrong repair If a product damage is caused by; •• Use of supplies or separately sold product unspecified by Samsung. •• Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. •• Remodeling or repairing the product by customer. •• Using it with incorrect voltage or non-authorised electrical connections. •• Not following the "cautions" in User Manual. •• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.) •• If a product is reinstalled or devices are connected additionally after installing the purchased product for the first time. •• If a product is reinstalled to move to a different spot or to move to a different house. •• If customer requests instructions on how to use because of another company's product. •• If customer requests instructions on how to use the network or another company's Program. •• If customer requests software installation and setup for the product. Others •• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc) •• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp, Filter, Ribbon, etc.) ――If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first. •• If a service technician removes/cleans dusts or foreign materials inside of the product. •• If customer requests an installation additionally after purchasing a product through homeshopping or online. 45
advertisement
Key Features
- 55.9 cm (22") LED TN
- WSXGA+ 1680 x 1050 pixels 16:10
- 60 Hz 5 ms 250 cd/m²
Frequently Answers and Questions
What is the size of the screen?
27 inches
What is the resolution of the screen?
1920 x 1080 pixels
What is the response time of the monitor?
4ms
What is the refresh rate of the monitor?
60Hz
Does the monitor have AMD FreeSync technology?
Yes
Does the monitor have an Eye Saver Mode?
Yes