Samsung | TH052EAV1 | User manual | Samsung TH052EAV1 User manual

Samsung TH052EAV1 User manual
Cassette Type Series
Slim 1 Way cassette
2 Way cassette
4 Way / mini 4 Way cassette
Air Conditioner
user & installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
safety information
State of California Proposition 65 Warning (US only)
•This product contains chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
To prevent electric shock, disconnect the power before servicing, cleaning, and installing
the unit.
WARNING
SAFETY INFORMATION
Before using your new air conditioner, please read this manual thoroughly to ensure that
you know how to safely and efficiently operate the extensive features and functions of
your new appliance.
Because the following operating instructions cover various models, the characteristics
of your air conditioner may differ slightly from those described in this manual. If you have
questions, call your nearest contact center or find help and information online at www.
samsung.com.
What the icons and signs in this user manual mean:
WARNING
CAUTION
CAUTION
Risk of death or serious personal injury.
Potential risk of personal injury or material damage.
To reduce the risk of fire, explosion, electric shock, or personal
injury when using your air conditioner, follow these basic safety
instructions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions carefully.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the contact center for help.
Recommended instructions or useful information for use.
These warning signs are here to prevent injury to you and others.
Please follow them carefully.
After reading this section, keep it in a safe place for future reference.
02_ safety information
WARNING
SEVERE WARNING SIGNS
If any gas or impurities other than R-410A refrigerant come into the
refrigerant pipe, serious problem may occur and it may cause injury.
Do not spray flammable gases such as insecticide near the air
conditioner.
• Potential risk of electric shock, fire or unit malfunction.
Do not insert anything such as fingers or branches into the air
conditioner vents.
• Keep children away from the air conditioner. Potential risk of personal
injury.
Do not cut the power plug and connect to a different power cable.
Never attempt to lengthen the power cable.
• Potential risk of fire or electric shock.
Do not yank the power cable and touch the power plug with hands.
• Potential risk of fire or electric shock.
Never use a damaged power plug, power cable, or loosened power
receptacle.
• Potential risk of fire or electric shock.
The electric work must be done by qualified service technician in
accordance with the national wiring regulations with rated cables.
• If the capacity of the power cable is insufficient or electric work have not
done properly, electric shock or fire may occur.
You should connect the power cable into the power cable terminal
and fasten it with a clamp.
safety information _03
ENGLISH
Do not place the air conditioner near hazardous substances or
equipment that releases free flames to avoid fire, explosions or
injuries.
• Potential risk of fire hazard or explosion.
Do not block or place items in front of the air conditioner. Do not step,
hang onto, or place heavy items on the air conditioner.
• Potential risk of personal injury.
Do not install the outdoor unit at an unstable place or elevated surface
where there is potential risk of falling.
• If the outdoor unit falls, it may cause personal injury or loss or property.
Any changes or modifications performed not following by the
installation manual, failure or damage may occur on the condition. In
this case, user will be responsible for all the repair expenses.
safety information
Do not connect the air conditioner with heating apparatus or attempt
to disassemble, remodel or repair it by yourself.
• Potential risk of malfunction, electric shock or fire. If repairs are needed,
consult the contact center.
Consult the place of purchase or a contact center to disassemble or
reinstall the air conditioner.
• Potential risk of unit malfunction, water leakage, electric shock, or fire.
Consult the place of purchase or contact center to install the air
conditioner.
• Improper installation carries a risk of unit malfunction, water leakage,
electric shock or fire.
• If installing in specialty areas, such as a factory complex or saline
coastal area, consult the place of purchase or contact center for specific
installation details.
Install the air conditioner with the support bracket securely fastened
to use for an extended period of time.
• If the air conditioner falls, it may cause personal injury or loss of property.
If the indoor unit gets wet, turn the power off immediately and call
your nearest contact center.
• Potential risk of fire or electric shock.
Install an exclusive circuit breaker and short-circuit breaker for the air
conditioner.
• Potential risk of electric shock or fire.
If the power cable is damaged, the manufacturer or a qualified service
technician must replace it.
Always make sure that the power supply is compliant with current
safety standards. Always install the air conditioner in compliance with
current local safety standards.
Verify that the voltage and frequency of the power supply comply with
the specifications and that the installed power is sufficient to ensure
the operation of any other domestic appliance connected to the same
electric lines.
The air conditioner must be installed in accordance with national
wiring regulations and safety regulations wherever applicable.
Install the supplied cables firmly. Fix them securely so that external
force is not exerted to the terminal block.
• If the connection is loose, heat may generate and cause electric shock or
fire.
04_ safety information
WARNING
SEVERE WARNING SIGNS
Do not bend the power cable excessively.
• Potential risk of fire or electric shock.
Always verify that electric connections (cable entry, section of leads,
protections...) are compliant with the electric specifications and with
the instructions provided in the wiring scheme.
Always verify that all connections comply with the standards
applicable to the installation of air conditioners.
Use a receptacle that has a ground terminal. The receptacle must be
used exclusively for the air conditioner.
• Improper electrical grounding may cause electric shock or fire.
Be sure to ground the unit. Do not connect the ground wire to gas or
water pipes, lighting rods, or telephone grounding lines.
• If the unit is not properly grounded, electric shock may result.
Always verify that a suitable grounding connection is available.
Disconnect the air conditioner from power supply before it is repaired
or disassembled.
safety information _05
ENGLISH
Use a rated circuit breaker only.
• Never use steel wires or copper wires as a circuit breaker. It may cause
fire or unit malfunction.
Use an exclusive power source for the air conditioner.
• Potential risk of electric shock or fire.
Do not put undue stress or place heavy object on the power cable.
safety information
CAUTION
CAUTION SIGNS
Connect the refrigerant tubes first then the electrical lines, when
installing the unit.
Always disassemble the electric lines before the refrigerant tubes.
Verify that the air conditioner is connected to the power supply in
accordance with the instructions provided in the wiring diagram
included in the manual.
The manufacturer shall not be responsible for damage originating
from unauthorized changes or the improper connection of electric and
hydraulic lines.
Failure to comply with these instructions or to comply with the
requirements set forth in the “Operating limits” table, included in the
manual, and shall immediately invalidate the warranty.
Ensure no water gets into the air conditioner.
• Potential risk or electric shock.
Turn off the air conditioner using the provided remote control or
control accessory (if provided). Do not unplug to turn off the unit
(unless there is an immediate danger).
Do not open the front grille during operation.
• Potential risk of electric shock or unit malfunction.
Cool air should not flow directly towards people, pets, and plants.
• It is harmful to your health, pets, and plants.
Do not run the air conditioner for an extended period of time in a room
with the door closed or with babies, elderly or disabled people.
• Open the door or windows to ventilate your room at least once an hour
to prevent oxygen shortage.
Do not drink drain water coming out of the air conditioner.
• Potential risk of health hazard.
Do not expose the dust filter to direct sunlight while drying.
• Strong direct sunlight may deform the dust filter.
Do not allow children to climb on the air conditioner.
Use only rated accessories and install the air conditioner with rated
equipments.
• If you do not use the rated accessories, the air conditioner may drop
from its place, water may leak or electric shock or fire may occur.
06_ safety information
CAUTION
CAUTION SIGNS
Do not use the air conditioner as a cooling precision instrument for
food, pets, plants, cosmetics or machinery.
Do not touch the pipe connected to the air conditioner.
This appliance should be installed according to the provided
installation manual.
Install the shortest possible length of pipe.
• If the length of pipe gets unnecessarily long, the life of air conditioner can
be shorten and become inefficient.
Install the power cable and communication cable of the indoor and
outdoor unit at least 1m away from the electric appliance.
Install the indoor unit away from lighting apparatus using the ballast.
• If you use the wireless remote control, reception error may occur due to
the ballast of the lighting apparatus.
For maximum safety, installers should always carefully read the
following warnings.
Do not install the air conditioner in following places.
• Place where there is mineral oil or arsenic acid.
• Resin parts flame and the accessories may drop or water may leak. The
capacity of the heat exchanger may reduce or the air conditioner may be
out of order.
• The place where corrosive gas such as sulfurous acid gas generates
from the vent pipe or air outlet.
• The copper pipe or connection pipe may corrode and refrigerant may
leak.
• The place where there is a machine that generates electromagnetic
waves.
The air conditioner may not operate normally due to control system.
• The place where there is a danger of existing combustible gas, carbon
fiber of flammable dust.
• The place where thinner or gasoline is handled Gas may leak and it may
cause fire.
safety information _07
ENGLISH
Do not give excessive shock to the air conditioner.
• Potential risk of fire or unit malfunction.
Do not spray water directly on the air conditioner or use benzene,
thinner or alcohol to clean the surface of the unit.
• Potential risk of electric shock or fire.
• Potential risk of damage to the air conditioner.
Do not place any objects, especially containers with liquid.
safety information
If the air conditioner is installed in a small room, measures must
be taken to prevent the refrigerant concentration in the room from
exceeding the safety limit in the event of refrigerant leakage.
Consult a dealer regarding the appropriate measures to prevent the
allowable concentration from being exceeded.
• If the refrigerant leaks, and cause the concentration limit to be exceeded,
hazards due to lack of oxygen in the room may result.
Install the air conditioner away from direct exposure to sunlight,
heating apparatus, and humid places.
• Hang curtains on windows to boost cooling efficiency and to avoid the
risk of electric shock.
The air conditioner is composed of moving parts. Keep children away
from the unit to avoid physical injury.
Check for damage on delivery. If damaged, do not install the air
conditioner and call the place of purchase immediately.
Insert the dust filter before operating the air conditioner.
• If there is no dust filter inside the air conditioner, accumulated dust may
shorten the life of the air conditioner and cause electricity waste.
Keep indoor temperatures stable and not extremely cold, especially
where there are children, elderly or disabled people.
Clean the dust filter every 2 weeks. Clean the filter more frequently if
the air conditioner is operated in dusty areas.
The packaging material and used batteries of the remote controller
(optional) must be disposed of in accordance with the national
standards.
The refrigerant used in the air conditioner must be treated as chemical
waste. Dispose the refrigerant following national standards.
Have a qualified service technician install the air conditioner and perform
a trial operation.
Firmly connect the drain hose to the air conditioner for proper water
drainage.
Install the outdoor unit where operating noise and vibration will not
disturb your neighbor and in a well-ventilated area with no obstacle.
• Potential risk of malfunction.
• Operating noise may disturb your neighbor.
08_ safety information
CAUTION
CAUTION SIGNS
Make sure that children take precautions against access to the air
conditioner and they do not play with the unit.
When using a wireless remote control, the distance should not be
more than 7 meters from the air conditioner.
When cleaning the outdoor unit, touch the heat exchanger radiator fins
with extreme care.
• Wearing thick gloves can protect your hands.
Make sure that the condensed water dripping from the drain hose runs
out properly and safely.
Store the operation and installation manual in a safe location and
remember to hand it over to the new owner if the air conditioner is
sold or transferred.
All the materials used for the manufacture and packaging of the air
conditioner are recyclable.
After completing the installation, always carry out a functional test and
provide the instructions on how to operate the air conditioner to the
user.
The appliance is not intended for use by young children or infirm
persons without supervision: Young children should be supervised to
ensure that they do not play with the appliance.
Clean the air conditioner after the inner fan stops operating.
• Potential risk of injury or electric shock.
Inspect the condition, electric connections, pipes and external case of
the air conditioner regularly by a qualified service technician.
Do not open doors and windows in the room being cooled during
operation unless necessary.
Do not block the air conditioner vents. If objects block the air flow, it
may cause unit malfunction or poor performance.
Make sure there are no obstacles under the indoor unit.
• Potential risk of fire or loss of property.
Make sure that there are no obstacles or covers that block the air
conditioner.
Allow sufficient space for air circulation.
• Insufficient ventilation may result in poor performance.
safety information _9
ENGLISH
If the remote control is not used for a long period of time, remove the
batteries to prevent leakage of electrolyte.
safety information
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure that they do
not play with the appliance.
For use in Europe: This appliance can be used by children aged from
8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
Make sure the voltage and frequency of the electric system are
compatible with the air conditioner.
If a power outage occurs while the air conditioner is working, turn off
the power source immediately.
Max current is measured according to IEC standard for safety and
current is measured according to ISO standard for energy efficiency.
The unit must be plugged into an independent circuit if applicable or
connect the power cable to the auxiliary circuit breaker. An all pole
disconnection from the power supply must be incorporated in the
fixed wiring with a contact opening of >3mm.
After connecting the power cable between the indoor/outdoor unit,
attach the cover of component box securely and make sure it is not
loose.
Power supply cords of parts of appliances for outdoor use shall not be
lighter than polychloroprene sheathed flexible cord. (Code designation
IEC:60245 IEC 57 / CENELEC: H05RN-F or IEC:60245 IEC 66 /
CENELEC: H07RN-F)
The unbalanced power must be maintained within 10% of supply
rating among whole indoor units.
If the power is unbalanced greatly, it may shorten the life of the
condenser.
If the unbalanced power is exceeded over 10% of supply rating, the
indoor unit is protected, stopped and the error mode indicates.
To protect the product from water and possible shock, you should
keep the power cable and the connection cord of the indoor and
outdoor units in the protection tube.
Connect the power cable to the auxiliary circuit breaker.
You must keep the cable in a protection tube.
Keep distances of 50mm or more between power cable and
communication cable.
10_ safety information
CAUTION
CAUTION SIGNS
Maximum length of power cable is decided within 10% of power drop. If
it exceeds, you must consider another power supplying method.
The circuit breaker (MCCB, ELB) should be considered more capacity, if
many indoor units are connected from one breaker.
Use an appropriate screwdriver for tightening the terminal screws.
Over-tightening the terminal screws may break them.
The air conditioner should be used only for the applications for which it
has been designed: the indoor unit is not suitable to be installed in areas
used for laundry.
Our units must be installed in compliance with the spaces indicated
in the installation manual to ensure either accessibility from both
sides or ability to perform routine maintenance and repairs. The units’
components must be accessible and that can be disassembled in
conditions of complete safety either for people or things. For this reason,
where it is not observed as indicated into the Installation Manual, the
cost necessary to reach and repair the unit (in safety, as required by
current regulations in force) with slings, trucks, scaffolding or any other
means of elevation won’t be considered in-warranty and charged to end
user.
Ensure the off-on and protection switches are properly installed.
Do not use the air conditioner if damaged. If problems occur, immediately
stop operation and disconnect the plug from the power supply.
If the air conditioner will not be used for an extended period of time (for
example, over several months), unplug the power from the wall.
Call the place of purchase or a contact center if repairs are needed.
• Potential risk of fire or electric shock if disassembly or repairs are attempted
by a non-qualified service technician.
If you smell burning plastic, hear strange sounds, or see smoke coming
from the unit, unplug the air conditioner immediately and call a contact
center.
• Potential risk of fire or electric shock.
safety information _11
ENGLISH
Use solderless ring terminal to connect the power cable to the power
terminal block.
contents
13
13
14
SLIM 1 WAY CASSETTE
2 WAY CASSETTE
4 WAY & MINI 4 WAY CASSETTE
USING YOUR AIR CONDITIONER
15
TIPS ON USING AIR CONDITIONER
CLEANING AND MAINTAINING
THE AIR CONDITIONER
17
17
17
19
20
21
21
23
24
25
25
26
CLEANING THE EXTERIOR
CLEANING THE GRILLE
Slim 1 way cassette
2 way cassette
4 way & mini 4 way cassette
CLEANING THE FILTER
Slim 1 way cassette
2 way cassette
4 way & mini 4 way cassette
MAINTAINING YOUR AIR CONDITIONER
Periodical checks
Internal protections via the unit control
system
27
29
30
TROUBLESHOOTING
OPERATION RANGES
MODEL SPECIFICATION (WEIGHT AND
DIMENSION)
31
INSTALLATION PART
VIEWING YOUR AIR CONDITIONER
13
15
17
APPENDIX
27
INSTALLING YOUR
AIR CONDITIONER
31
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
and its electronic accessories should not be mixed with other commercial wastes for disposal.
For information on Samsung’s environmental commitments and product specific regulatory obligations e.g. REACH visit:
samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
12_ contents
viewing your air conditioner
Congratulations on the purchase of the air conditioner. We hope you enjoy the features of your air
conditioner and stay cool or warm with optimal efficiency.
Please read the user manual to get started and to make the best use of the air conditioner.
SLIM 1 WAY CASSETTE
X PSSMA / X PC1BUSE7
X PC1NUPMA / X PC1BUPM7
Air flow blade
Panel
Air intake
Remote control sensor
Display
Timer indicator
PSSMA / PC1NUPMA
Heating and cooling model
- Model that is not equipped with S-Plasma ion: Fan
indicator
- Model that is equipped with S-Plasma ion: Super
Fan indicator
Operation(Blue) / Defrost(Yellow)
Cooling only model
PC1BUSE7 / PC1BUPM7:
Super Fan indicator
Filter reset indicator
Operation indicator
When operating an indoor unit (including Fan mode), SPi will not operate automatically.
So, press the [Super Fan] button on the wireless remote controller to operate SPi.
2 WAY CASSETTE
Main parts
X P2SMA
Air flow blade
Air intake
Air filter (under the grille)
Display
Display
Filter reset indicator
Fan indicator
Timer indicator
Power indicator
Power button
Remote control sensor
Your air conditioner and display may look slightly different from the illustration shown above
depending on your model.
viewing your air conditioner _13
ENGLISH
Main parts
viewing your air conditioner
4 WAY & MINI 4 WAY CASSETTE
Main parts
Air flow blade
Air intake
Air filter (under the grille)
Display
Display
X Type A (MGCH095IU5G)
Remote control sensor
Timer indicator
Power button
Power indicator
Fan indicator
Removing frost indicator
Filter reset indicator
X Type B (PMSMA / PMSMAA)
Filter reset indicator
Fan indicator
Timer indicator
Removing frost indicator
Power indicator
Remote control sensor
Powerr button
X Type C (P4SMA / PNMAB)
Filter reset indicator
Fan indicator
Timer indicator
Removing frost indicator
Power indicator
Remote control sensor
Power button
Your air conditioner and display may look slightly different from the illustration shown above
depending on your model.
14_ viewing your air conditioner
using your air conditioner
TIPS ON USING AIR CONDITIONER
Here are some tips that you would follow when using your air conditioner.
RECOMMENDATION
Cooling
• If current outside temperatures are much higher than the
selected indoor temperature, it may take time to bring the
inner temperature to the desired coolness.
• Avoid drastically turning down the temperature. Energy is
wasted and the room does not cool faster.
Heating
• Since the air conditioner heats the room by taking heat
energy from outdoor air, the heating capacity may decrease
when outdoor temperatures are extremely low. If you feel
the air conditioner insufficiently heats, using an additional
heating appliance in combination with the air conditioner is
recommended.
Frost & De-ice
• When the air conditioner runs in Heat mode, due to
temperature difference between the unit and the outside air,
frost will form.
If this happens:
- The air conditioner stops heating.
- The air conditioner will operate automatically in De-ice
mode for 10 minutes.
- The steam produced on the outdoor unit in De-ice mode is
safe.
No intervention is required; after about 10 minutes, the air
conditioner operates again normally.
The unit will not operate when it starts to de-ice.
using your air conditioner _15
ENGLISH
TOPIC
using your air conditioner
TOPIC
RECOMMENDATION
Fan
• Fan may not operate for about 3~5 minutes at the beginning
to prevent any cold blasts while the air conditioner is
warming up.
High indoor/outdoor • If both indoor and outdoor temperatures are high and the air
temperatures
conditioner is running in Heat mode, the outdoor unit’s fan
and compressor may stop at times. This is normal; wait until
the air conditioner turns on again.
Power failure
• If a power failure occurs during the operation of the air
conditioner, the operating immediately stops and unit will
be off. When power returns, the air conditioner will run
automatically.
Protection
mechanism
• If the air conditioner has just been turned on after operation
stops or being plugged in, cool/warm air does not come out
for 3 minutes to protect the compressor of the outdoor unit.
16_ using your air conditioner
cleaning and maintaining the
air conditioner
For the best performance from your air conditioner, clean it periodically. When cleaning,
make sure to unplug from the unit for user’s safety.
When cleaning the exterior, make sure to unplug the power from the unit. No special
tools are needed to clean it.
1. Wipe the surface of the unit with a slightly wet or dry
cloth when needed. Wipe off dirt of odd-shaped area by
using a soft brush.
Example : 4 way cassette
CAUTION
Do not use Benzene or Thinner.
They may damage the surface of the air
conditioner and can create a risk of fire.
CLEANING THE GRILLE
When cleaning the grille, make sure to unplug the power from the unit. No special tools
are needed to clean it.
Slim 1 way cassette
1. Open the grille.
Press the [Push] signs (PSSMA : Located in 3 places, PC1BUSE7 : Located in 4 places) and
open the grille.
X PSSMA
X PC1BUSE7
X PC1NUPMA / PC1BUPM7
• When detaching the panel, grip the link part where the
panel and intake panel are connected ❶ and push up
the link at the panel part ❷ to disconnect as shown in
the picture (1).
• When power supply malfunctions, detach the panel by
using a driver at the marked point (2) and proceed with
the same method as shown in the picture (1) to detach
the panel and then check the power connection status.
(2)
(1)
❶
❷
cleaning and maintaining _17
ENGLISH
CLEANING THE EXTERIOR
cleaning and maintaining the
air conditioner
2. Unhook the safety clips by holding the front grille.
3. Detach the front grille.
Hold the front grille at a 45° angle, lift it up slightly and then pull the grille forward.
CAUTION
Hold the grille to prevent dropping outside from the opening of the front
grille. If not, it may cause a potential risk of personal injury.
Cleaning the grille is also available while being attached to the panel.
4. Pull out the Air filter.
Grab the Air filter and lift it upwards while pushing slightly, and then pull the Air filter forward.
5. Clean the grille with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with
running water and dry it in a ventilated area.
6. Insert the Air filter back in its original position.
7. Reattach the front grille.
Place the hook on the unit to the right place then push the front grille upward. Mount the
safety clips to its original position.
The illustration shown above may differ from yours depending on your model.
18_ cleaning and maintaining
CLEANING THE GRILLE
2 way cassette
X P2SMA
1. Open the front grille.
2. Unhook the safety clips by holding the front grille.
3. Detach the front grille.
Hold the front grille at a 45° angle, lift it up slightly and then pull the grille forward.
CAUTION
H ld th
Hold
the grille
ill tto preventt d
dropping outside from the
th opening
i off the
th front
f
grille. If not, it may cause a potential risk of personal injury.
Cleaning the grille is also available while being attached to the panel.
4. Pull out the Air filter.
Grab the Air filter and lift it upwards while pushing slightly, and then pull the Air filter forward.
5. Clean the grille with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with
running water and dry it in a ventilated area.
6. Insert the Air filter back in its original position.
7. Reattach the front grille.
Place the hook on the unit to the right place then push the front grille upward. Mount the
safety clips to its original position.
cleaning and maintaining _19
ENGLISH
Push the [W] tabs located in 3 places to unlock the groove on the front grille.
The grille automatically drops. Two safety clips are mounted to the inside front grille to
prevent dropping downward.
cleaning and maintaining the
air conditioner
4 way & mini 4 way cassette
X P4SMA / P4NMAB / PMSMA / PMSMAA
1. Open the front grille.
Push both of the tabs outwards to unlock the hook
on the front grille. The grille automatically drops. Two
safety clips are mounted to the inside front grille to
prevent dropping downward.
2. Unhook the safety clips by holding the front grille.
3. Detach the front grille.
Hold the front grille at a 45° angle, lift it up slightly and then pull the grille forward.
CAUTION
Hold the grille to prevent dropping outside from the opening of the front
grille. If not, it may cause a potential risk of personal injury.
Cleaning the grille is also available while being attached to the panel.
4. Pull out the Air filter.
Grab the Air filter and lift it upwards while pushing slightly, and then pull the Air filter forward.
5. Clean the grille with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with
running water and dry it in a ventilated area.
6. Insert the Air filter back in its original position.
You will hear a click sound when the Air filter is properly placed.
7. Reattach the front grille.
Place the hook on the unit to the right place then push the front grille upward. Mount the
safety clips to its original position.
The illustration shown above may differ from yours depending on your model.
20_ cleaning and maintaining
CLEANING THE FILTER
When cleaning the filter, make sure to unplug the power from the unit. Washable foam
based Air filter captures large particles from the air. The filter is cleaned with a vacuum
or by hand washing.
Slim 1 way cassette
1. Open the grille.
X PSSMA
X PC1BUSE7
(2)
X PC1NUPMA / PC1BUPM7
• When detaching the panel, grip the link part where the
panel and intake panel are connected ❶ and push up the
link at the panel part ❷ to disconnect as shown in the
picture (1).
• When power supply malfunctions, detach the panel by
using a driver at the marked point (2) and proceed with
the same method as shown in the picture (1) to detach
the panel and then check the power connection status.
(1)
❶
❷
2. Pull out the Air filter.
Grab the Air filter and lift it upwards while pushing
slightly, and then pull the Air filter forward.
When cleaning the filter you do not need to detach
the grille at all times. If you want to detach the front
grille, see step 2 and 3 on page 14 for instructions.
cleaning and maintaining _21
ENGLISH
Press the [Push] signs (PSSMA : Located in 3 places, PC1BUSE7 : Located in 4 places) and
open the grille.
cleaning and maintaining the
air conditioner
3. Clean the Air filter with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with
running water and dry it in a ventilated area.
• For best conditions, repeat every two weeks.
• If the Air filter dries in a confined (or humid) area, odors may generate. If it occurs,
re-clean and dry it in a well-ventilated area.
4. Insert the Air filter back in its original position.
You will hear a click sound when the Air filter is properly placed.
5. Close the front grille by pushing it upward.
• The illustration shown above may differ from yours depending on your model.
• After cleaning the filter, press the Filter Reset button on the remote control for 2 seconds
to reset the filler schedule. Filter sign indicator will be on for cleaning time.
22_ cleaning and maintaining
CLEANING THE FILTER
When cleaning the filter, make sure to unplug the power from the unit. Washable foam
based Air filter captures large particles from the air. The filter is cleaned with a vacuum
or by hand washing.
2 way cassette
1. Open the front grille.
The grille automatically drops. Two safety clips are mounted to the inside front grille to
prevent dropping downward.
2. Pull out the Air filter.
Grab the Air filter and lift it upwards while pushing slightly, and then pull the Air filter forward.
When cleaning the filter you do not need to detach the grille at all times. If you want to
detach the front grille, see step 2 and 3 on page 15 for instructions.
3. Clean the Air filter with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with
running water and dry it in a ventilated area.
• For best conditions, repeat every two weeks.
• If the Air filter dries in a confined (or humid) area, odors may generate. If it occurs,
re-clean and dry it in a well-ventilated area.
4. Insert the Air filter back in its original position.
You will hear a click sound when the Air filter is properly placed.
5. Close the front grille by pushing it upward.
After cleaning the filter, press the Filter Reset button on the remote control for 2 seconds
to reset the filler schedule. Filter sign indicator will be on for cleaning time.
cleaning and maintaining _23
ENGLISH
Push the [W] tabs located in 3 places to unlock the hook on the front grille.
cleaning and maintaining the
air conditioner
4 way & mini 4 way cassette
1. Push both of the tabs outwards to unlock the hook on the front grille.
The grille automatically drops. Two safety clips are mounted to the inside front grille to
prevent dropping downward.
2. Pull out the Air filter.
Grab the Air filter and lift it upwards while pushing slightly, and then pull the Air filter forward.
When cleaning the filter you do not need to detach the grille at all times. If you want to
detach the front grille, see step 2 and 3 on page 16 for instructions.
3. Clean the Air filter with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with
running water and dry it in a ventilated area.
• For best conditions, repeat every two weeks.
• If the Air filter dries in a confined (or humid) area, odors may generate. If it occurs,
re-clean and dry it in a well-ventilated area.
4. Insert the Air filter back in its original position.
You will hear a click sound when the Air filter is properly placed.
24_ cleaning and maintaining
5. Close the front grille by pushing it upward.
• The illustration shown above may differ from yours depending on your model.
• After cleaning the filter, press the Filter Reset button on the remote control for 2 seconds
to reset the filler schedule. Filter sign indicator will be on for cleaning time.
MAINTAINING YOUR AIR CONDITIONER
1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours
and disconnect the power plug. There may be internal damage if moisture is
left in components.
2. Before using the air conditioner again, dry the inner components of the
air conditioner again by running in Fan mode for 3 to 4 hours. This helps
remove odors which may have generated from dampness.
Periodical checks
Refer to the following chart to maintain the air conditioner properly.
Type
Description
Clean the air filter (1)
Indoor unit
Monthly
Every 4
months
O
Clean the condensate drain pan (2)
O
Thoroughly clean the heat exchanger (2)
O
Clean the condensate drain pipe (2)
O
O
Replace the remote control batteries (1)
Clean the heat exchanger on the outside of
the unit (2)
Outdoor unit
Once a
year
O
Clean the heat exchanger on the inside of
the unit (2)
O
Clean the electric components with jets of
air (2)
O
Verify that all the electric components are
firmly tightened (2)
O
Clean the fan (2)
O
Verify that all the fan assembly is firmly
tightened (2)
O
Clean the condensate drain pan (2)
O
The checks and maintenance operations described are essential to guarantee the
efficiency of the air conditioner. The frequency of these operations varies according to the
characteristics of the area, the amount of dust, etc.
(1) The described operations should be performed more frequently if the area of installation
is very dusty.
(2) These operations must always be performed by qualified personnel. For
more detailed information, see the Installation Manual.
cleaning and maintaining _25
ENGLISH
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in
best condition.
cleaning and maintaining the
air conditioner
Internal protections via the unit control system
This internal protection operates if an internal fault occurs in the air conditioner.
Type
Description
Against cold air
The internal fan will be off to against cold air when the heat pump is
heating.
De-ice cycle
The internal fan will be off to against cold air when the heat pump is
heating.
Anti-protection of
internal battery
The compressor will be off to protect internal battery when the air conditioner operates in Cool mode.
Protect compressor
The air conditioner does not start operating immediately to protect the
compressor of the outdoor unit after it has been started.
If the heat pump is operating in Heat mode, De-ice cycle is actuated to remove frost from
an outdoor unit that may have deposited at low temperatures.
The internal fan is switched off automatically and restarted only after the de-ice cycle is
completed.
26_ cleaning and maintaining
appendix
TROUBLESHOOTING
Refer to the following chart if the air conditioner operates abnormally. This may save
time and unnecessary expenses.
SOLUTION
• Because of the protective mechanism, the appliance
does not start operating immediately to keep the unit from
overloading.
The air conditioner will start in 3 minutes.
The air conditioner
• Check that the power plug is properly connected. Insert the
does not work at all.
power plug into the wall socket correctly.
• Check if the circuit breaker is switched off.
• Check if there is a power failure.
• Check your fuse. Make sure it is not blown out.
The temperature
does not change.
• Check if you selected Fan mode.
Press the Mode button on the remote control to select
another mode.
The cool (warm)
air does not come
out of the air
conditioner.
• Check if the set temperature is higher (lower) than the
current temperature. Press the Temperature button on
the remote control to change the set temperature. Press
the Temperature button to decrease or increase the
temperature.
• Check if the air filter is blocked by dirt. Clean the air filter
every two weeks.
• Check if the air conditioner has just been turned on. If so,
wait 3 minutes. Cool air does not come out to protect the
compressor of the outdoor unit.
• Check if the air conditioner is installed in a place with a direct
exposure to sunlight. Hang curtains on windows to boost
cooling efficiency.
• Check if the cover or any obstacle is not near the outdoor
unit.
• Check if the refrigerant pipe is too long.
• Check if the air conditioner is only available in Cool mode.
• Check if the remote control is only available for cooling
model.
The fan speed does
not change.
• Check if you selected Auto or Dry mode.
The air conditioner automatically adjusts the fan speed to
Auto in Auto/Dry mode.
Timer function does
not set.
• Check if you press the Power button on the remote control
after you have set the time.
appendix _27
ENGLISH
PROBLEM
The air conditioner
does not operate
immediately after it
has been restarted.
appendix
PROBLEM
Odors permeate
in the room during
operation.
SOLUTION
• Check if the appliance is running in a smoky area or if there
is a smell entering from outside. Operate the air conditioner
in Fan mode or open the windows to air out the room.
The air conditioner
makes a bubbling
sound.
• A bubbling sound may be heard when the refrigerant is
circulating through the compressor. Let the air conditioner
operate in a selected mode.
• When you press the Power button on the remote control,
noise may be heard from the drain pump inside the air
conditioner.
Water is dripping
from the air flow
blades.
• Check if the air conditioner has been cooling for an extended
period of time with the air flow blades pointed downwards.
Condensation may generate due to the difference in
temperature.
Remote control is
not working.
• Check if your batteries are depleted.
• Make sure batteries are correctly installed.
• Make sure nothing is blocking your remote control sensor.
• Check that there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent bulbs
or neon signs may interrupt the electric waves.
The air conditioner
does not turn on or
off with the wired
remote control.
The wired remote
control does not
operate.
• Check if you set the wired remote control for group control.
The indicators of
the digital display
flashes.
• Press the Power button on the remote control to turn the
unit off and switch the circuit breaker off. Then, switch it on
again.
28_ appendix
• Check if TEST indicator is displayed on the wired remote
control. If so, turn off the unit and switch off the circuit
breaker. Call your nearest contact center.
OPERATION RANGES
The table below indicates the temperature and humidity ranges the air conditioner can
be operated within. Refer to the table for efficient use.
MODE
OUTDOOR
TEMPERATURE
INDOOR
TEMPERATURE
INDOOR
HUMIDITY
REMARKS
DVM, DVM PLUS II/III/IV, CAC Inverter
DVM Desert
CAC, Free Joint Multi
CAC Inverter(UH026/035EAV1)
80% or less
CAC Inverter(AC026/035FCADEH)
CAC Inverter(UH052/060/070EAV1)
DVM MINI(RVXMHF040/050EA, RVXMHF050/060GA)
DVM MINI(RD040/050/060MHXGA, RD040/050/060MHXEA)
27°C/81°F or less
-20°C/-4°F to 24°C/75°F
-5°C/23°F to 24°C/75°F 15°C/59°F to 27°C/81°F
27°C/81°F or less
-15°C/5°F to 24°C/75°F
HEATING
27°C/81°F or less
-10°C/14°F to 24°C/75°F
27°C/81°F or less
-20°C/-4°F to 24°C/75°F
27°C/81°F or less
-20°C/-4°F to 26°C/79°F
DVM PLUS II/III/IV, CAC Inverter(UH052/060/070EAV1), DVM Desert
CAC
-5°C/23°F to 43°C/109°F
-5°C/23°F to 54°C/129°F
-5°C/23°F to 43°C/109°F
DRYING
-10°C/14°F to 43°C/109°F
-10°C/14°F to 46°C/115°F
-15°C/5°F to 43°C/109°F
18°C/64°F to 32°C/90°F
18°C/64°F to 32°C/90°F
21°C/70°F to 32°C/90°F
18°C/64°F to 32°C/90°F
18°C/64°F to 32°C/90°F
18°C/64°F to 32°C/90°F
Free Joint Multi, DVM, CAC Inverter(UH026/035EAV1, AC026/035FCADEH)
CAC Inverter
DVM MINI(RVXMHF040/050EA, RVXMHF050/060GA)
DVM MINI(RD040/050/060MHXGA, RD040/050/060MHXEA)
-
DVM, DVM PLUS II/III/IV, Free Joint Multi, CAC Inverter
DVM Desert
CAC
CAC Inverter(UH026/035EAV1)
CAC Inverter(AC026/035FCADEH)
CAC Inverter(UH052/060/070EAV1)
-
The standardized temperature for heating is 7˚C/45˚F. If the outdoor temperature drops to 0˚C/32˚F or
below, the heating capacity can be reduced depending on the temperature condition.
If the cooling operation is used at over 32˚C/90˚F (indoor temperature), it does not cool at its full
capacity.
Type
2 Way cassette
4 Way cassette
mini 4 Way
cassette
AVMGH(C)77
AVMCH(C)77
AVMC477
-
AVXC277
ND77727777
AVXC477
ND77747777
AVXCM77
ND777M7777
-
GH(C)777EAM
CH(C)777EAM7
CH(C)777EZM7
-
CAC Inverter
AC777FB1DEH
SH777EAV7
NS7771DXEA
-
CH777EAV7
CH777EAS
TH777EAV7
Free Joint Multi
MH777FS77
NJ7771HX77
-
-
MH777FM7
NJ777MHX77
Model
Slim 1 Way
cassette
DVM
DVM PLUS II/III/IV/
DVM Desert
CAC
AVXCS77
ND77717777
appendix _29
ENGLISH
18°C/64°F to 32°C/90°F
18°C/64°F to 32°C/90°F
21°C/70°F to 32°C/90°F
18°C/64°F to 32°C/90°F
18°C/64°F to 32°C/90°F
18°C/64°F to 32°C/90°F
18°C/64°F to 32°C/90°F
18°C/64°F to 32°C/90°F
-5°C/23°F to 43°C/109°F
-5°C/23°F to 54°C/129°F
-5°C/23°F to 43°C/109°F
-10°C/14°F to 43°C/109°F
COOLING
-10°C/14°F to 46°C/115°F
-15°C/5°F to 43°C/109°F
-5°C/23°F to 43°C/109°F
-5°C/23°F to 48°C/118°F
appendix
MODEL SPECIFICATION (WEIGHT AND DIMENSION)
Model
Net weight
Net dimension (W×D×H)
MH026FSEA
MH035FSEA
MH030FMEA
MH035FMEA
MH052FMEA
AJ040FCJ2EH
AJ050FCJ2EH
AJ052FCJ3EH
AJ068FCJ3EH
AJ070FCJ4EH
AJ080FCJ4EH
AJ100FCJ5EH
AC026FB1DEH
AC035FB1DEH
AC026FCADEH
AC035FCADEH
AVXCSH036EE
AVXCSH028EE
AVXCSH022EE
AVXC2H071EE
AVXC2H056EE
AVXCMH060EE
AVXCMH056EE
AVXCMH036EE
AVXCMH028EE
RD080HHXGA
RD100HHXGA
RD120HHXGA
RD140HHXGA
RD160HHXGA
RD180HHXGA
RD200HHXGA
RD080HRXGA
RD100HRXGA
RD120HRXGA
RD140HRXGA
RD160HRXGA
RD180HRXGA
RD200HRXGA
RD080HHXGB
RD100HHXGB
RD120HHXGB
RD140HHXGB
RD160HHXGB
RD180HHXGB
RD200HHXGB
RD080HRXGB
RD100HRXGB
RD120HRXGB
RD140HRXGB
RD160HRXGB
RD180HRXGB
RD200HRXGB
RD040MHXEA
RD050MHXEA
RD060MHXEA
RD040MHXGA
RD050MHXGA
RD060MHXGA
10.5 kg
10.5 kg
17.0 kg
17.0 kg
17.0 kg
37.9 kg
40.0 kg
49.0 kg
57.3 kg
65.0 kg
65.0 kg
74.5 kg
10.0 kg
10.0 kg
33.0 kg
33.0 kg
10.5 kg
10.5 kg
10.5 kg
22.0 kg
21.0 kg
17.0 kg
17.0 kg
17.0 kg
17.0 kg
237.0 kg
237.0 kg
240.0 kg
280.0 kg
329.0 kg
340.0 kg
349.0 kg
243.0 kg
243.0 kg
243.0 kg
293.0 kg
338.0 kg
349.0 kg
355.0 kg
237.0 kg
237.0 kg
240.0 kg
280.0 kg
329.0 kg
340.0 kg
349.0 kg
243.0 kg
243.0 kg
243.0 kg
293.0 kg
338.0 kg
349.0 kg
355.0 kg
100.0 kg
100.0 kg
103.0 kg
100.0 kg
100.0 kg
103.0 kg
970×410×135 mm
970×410×135 mm
575×575×260 mm
575×575×260 mm
575×575×260 mm
790×285×545 mm
790×285×545 mm
880×310×638 mm
880×310×798 mm
880×310×798 mm
880×310×798 mm
940×330×998 mm
970×410×135 mm
970×410×135 mm
790×285×548 mm
790×285×548 mm
970×410×135 mm
970×410×135 mm
970×410×135 mm
890×575×230 mm
890×575×230 mm
575×575×260 mm
575×575×260 mm
575×575×260 mm
575×575×260 mm
880×765×1695 mm
880×765×1695 mm
880×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
880×765×1695 mm
880×765×1695 mm
880×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
880×765×1695 mm
880×765×1695 mm
880×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
880×765×1695 mm
880×765×1695 mm
880×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
1295×765×1695 mm
940×330×1210 mm
940×330×1210 mm
940×330×1210 mm
940×330×1210 mm
940×330×1210 mm
940×330×1210 mm
Type
Indoor unit
FJM
Outdoor unit
Indoor unit
CAC
Outdoor unit
Indoor unit
DVM
Outdoor unit
(DVM PLUS 4)
Outdoor unit
(DVM mini)
30_ installing your air conditioner
Installation Part
5. Check the level of the indoor unit by using a leveler.
X A tilt of the indoor unit may cause malfunction of a built-in
float switch and water leaks.
(Not applied to AC777FB1DEH)
Indoor Unit Installation
Level
It is recommended to install the Y-joint before installing the indoor
unit.
dimensions.
want to install the indoor unit.
Note
Since the diagram is made of paper, it may shrink
or stretch slightly due to temperature or humidity.
For this reason, before drilling the holes maintain
the correct dimensions between the markings.
X You should adjust the gauge of dimensions and the pattern
sheet to fit the cutting dimensions of ceiling.
X Make sure that the indoor unit is installed at a level if the
indoor unit slants too much, there can be water leaks.
2 way cassette
Slim 1 way cassette
2. Insert bolt anchors, use existing ceiling supports or construct a
suitable support as shown in figure.
15mm
15mm
Side view
Air inlet
Air outlet
Ceiling
Gauge of Dimensions
Insert
Indoor Unit
Ceiling
Ceiling
20mm
Indoor Unit
20mm
Ceiling
Hole in anchor
Hole in plug
35mm
Suspension bolt(3/8" or M10)
3. Install the suspension bolts depending on the ceiling type.
CAUTION
NN
Mini 4 way cassette
4 way cassette
Concrete
NN
X Ensure that the ceiling is strong enough to support
the weight of the indoor unit. Before hanging the
unit, test the strength of each attached suspension
bolt.
X If the length of suspension bolt is more than 1.5m, it
is required to prevent vibration.
X If this is not possible, create an opening on the false
ceiling in order to be able to use it to perform the
required operations on the indoor unit.
Ceiling support
4. Screw eight nuts to the suspension bolts making space for
Ceiling
17mm
Gauge of
Dimensions
Gauge of
Dimensions
7. Tighten the upper part nuts.
8. Remove the gauge of dimensions after installing the indoor
unit.
Performing Leak Test & Insulation
Leak test
LEAK TEST WITH NITROGEN(before opening valves)
In order to detect basic refrigerant leaks, before recreating the
vacuum and recirculating the R-410A, it’s responsible of installer
to pressurize the whole system with nitrogen(using a pressure
regulator) at a pressure above 4.1MPa(gauge).
LEAK TEST WITH R-410A(after opening valves)
Before opening valves, discharge all the nitrogen into the
system and create vacuum. After opening valves check leaks
using a leak detector for refrigerant R-410A.
hanging the indoor unit.
You must install the suspension bolts more than four
when installing the indoor unit.
CAUTION
Nut
Washer
Leak check
Rubber
Fasten the nut
J The designs and shape are subject
to change according to the model.
Discharge all the nitrogen to create a vacuum and
charge the system.
installing your air conditioner _31
ENGLISH
6. Adjust the height of the indoor unit by using the gauge of
1. Place the pattern sheet on the ceiling at the spot where you
7 When installing insulation in places and conditions below, use the
Insulation
Once you have checked that there are no leaks in the system,
you can insulate the piping and hose.
1. To avoid condensation problems, place T13.0 or thicker
Acrylonitrile Butadien Rubber separately around each
refrigerant pipe.
Always make the seam of pipes face upwards.
Note
No gap
same insulation that is used for high humidity conditions.
<Geological condition>
- High humidity places such as shoreline, hot spring, near lake or
river, and ridge (when the part of the building is covered by earth
and sand.)
<Operation purpose condition>
- Restaurant ceiling, sauna, swimming pool etc.
<Building construction condition>
- The ceiling frequently exposed to moisture and cooling is not
covered.
e.g. The pipe installed at a corridor of a dormitory and studio or
near an exit that opens and closes frequently.
- The place where the pipe is installed is highly humid due to the
lack of ventilation system.
NBR(T13.0 or thicker)
2. Wind insulating tape around the pipes and drain hose avoiding
to compress the insulation too much.
Insulation cover pipe
Insulation pipe
Indoor unit
Must fit tightly against
body without any gap.
X Install the insulation not to get wider and use the adhesives on the
connection part of it to prevent moisture from entering.
X Wind the refrigerant pipe with insulation tape if it is exposed to
outside sunlight.
X Install the refrigerant pipe respecting that the insulation does not
get thinner on the bent part or hanger of pipe.
X Add the additional insulation if the insulation plate gets thinner.
Hanger
Additional insulation
Be sure to overlap
the insulation
3. Finish wrapping insulating tape around the rest of the
a
a×3
pipes leading to the outdoor unit.
Refrigerant pipe insulation
4. The pipes and electrical cables connecting the indoor unit
with the outdoor unit must be fixed to the wall with
suitable ducts.
Drain pipe and Drain Hose Installation
All refrigerant connection must be accessible, in order
to permit either unit maintenance or removing it
completely.
5. Select the insulation of the refrigerant pipe.
Pipe
Liquid
pipe
Gas pipe
32_ installing your air conditioner
X Give a slightly slant to the drainpipe for proper drainage of
condensate water.
X There must be no gap on the connected part so that the
drainpipe is not separated from the flexible hose.
2. Insulate the drainpipe, and then fix it as indicated.
X Insulate the gas side and liquid side pipe referring to the
thickness according to the pipe size.
X Indoor temperature of 30°C and humidity of 85% is the standard
condition. If installing in a high humidity condition, use one grade
thicker insulator by referring to the table below.
X Insulator’s heat-resistance temperature should be more
than 120°C.
Insulation Type (Heating/Cooling)
Standard
High humidity
Pipe size
[30°C, 85%] [30°C, over 85%]
EPDM, NBR
Ø6.35 ~ Ø9.52
9t
o
Ø12.7 ~ Ø50.80
13t
o
Ø6.35
13t
19t
Ø9.52 ~ Ø25.40
25t
19t
Ø28.58 ~ Ø44.45
32t
Ø50.80
25t
38t
1. Install the drain pipe as shortly as possible.
X Whole drainpipe should be insulated by 5t(or more)
insulation to prevent water condensation.
Insulation cover band
Insulation drainpipe
Insulation cover drain
Indoor
Unit
Remarks
Drain
hose port
Internal
temperature
is higher than
120°C
Flexible
hose
Band(Not supplied)
Band
Adhesives
Drainpipe
Band
JFlexible hose Installation
Wiring Work
Be horizontal
Power and communication cable connection
Indoor
Unit
Indoor
Unit
Flexible hose
X Install horizontally
1. Before wiring work, you must turn off all power source.
Max. 20mm
2. Indoor unit power should be supplied through the
breaker(MCCB, ELB) separated by the outdoor power.
X Max. allowable axis gap
Insulation
Indoor
Unit
Max. 30˚
X Max. allowable bending
angle
Flexible hose
(Apply adhesive on
the outside)
3. The power cable should be used only copper wires.
ENGLISH
Connect
to PVC
drain pipe
PVC
drain pipe
(Apply
adhesive on
the inside)
Connect to
indoor unit
Insulation
4. Connect the power cable{1(L), 2(N)} among the units within
maximum length and communication cable(F1, F2) each.
5. Connect V1, V2(for DC12V) and F3, F4(for communication)
when installing the wired remote Control.
X Handle with using adhesive not to
block the inside of flexible hose
Outdoor
Unit
Wired Remote
Control
220-240V~
Drainpipe Connection
1. The drain pipe should be installed within 100mm from the
L
Indoor Unit 1
Indoor Unit 2
EEV kit
N
flexible hose, lift up from 100mm to 550mm and lift down
20mm or more.
Indoor Unit 3
N
L
N
L
N
L
K ELB : Essential Installation
2. Install horizontal drainpipe with a slope of 1/100 or more
and fix it by hanger space of 1~1.5m.
Indoor Unit 4 Indoor Unit 5 Indoor Unit 6
K Ceiling, wall-mounted indoor unit.
3. Install the air vent in the horizontal drainpipe to prevent
water flow back to the indoor unit.
You may not need to install it if there were proper
slope in the horizontal drainpipe.
Note
Selecting compressed ring terminal
Silver solder
4. The flexible hose should not be installed upward position,
it may cause water flow back to the indoor unit.
5. Install U-trap at the end of the drainpipe to prevent a nasty
smell to reach the indoor unit.
1~1.5m
Air vent
300mm or less
1.5
100mm
or more Hanger
2.5
Flexible hose
100~550mm
or more
4
Horizontal drainpipe
more than 1/100 slope
Centralized Drainage
1. Install main air vent at the front of the farthest indoor unit from
the main drain when installed indoor units are more than 3.
2. You may need to install individual air vent to prevent water
flow back at the top of each indoor unit drainpipe.
1~1.5m
Hanger
Main air vent
550mm or less
Individual
air vent
4
4
4
4
6.6
8
6.6
8.5
4
9.5
±0.2
3.4
±0.2
4.2
±0.2
5.6
+0.3
-0.2
+0.3
-0.2
+0.3
-0.2
1.7
±0.2 4.1 6 16
4.3
2.3
±0.2
6 6 17.5
4.3
3.4
±0.2
6 5 20
4.3
+0.2
0.7
0
+0.2
0.8
0
+0.2
0.9
0
Specification of electronic wire
Ceiling
Main drainpipe
B
D
d1
E F L
d2
t
Norminal Norminal
dimensions dimensions Standard
Standard
Standard
Standard
Allowance
Allowance
Allowance
Allowance
for cable for screw dimension
Min. Min. Max. dimension
Min.
dimension
dimension
(mm)
(mm)
(mm)
(mm)
(mm)
(mm2)
(mm)
(mm)
(mm)
(mm)
Centralized horizontal drainpipe
(more than 1/100 slope)
Power supply
MCCB
ELB
Power
cable
Earth
cable
Communication
cable
Max : 242V
Min : 198V
XA
X A, 30mmA
0.1 sec
2.5mm2
2.5mm2
0.75~1.5mm2
X Decide the capacity of ELB and MCCB by below formula.
The capacity of ELB, MCCB X [A] = 1.25 X 1.1 X ∑Ai
7X : The capacity of ELB, MCCB
7∑Ai : Sum of Rating currents of each indoor unit.
7Refer to each installation manual about the rating current of indoor unit.
X Decide the power cable specification and maximum length
within 10% power drop among indoor units.
n
∑(
k=1
Coef×35.6×Lk×ik
1000×Ak
)<
10% of input
voltage[V]
7Coef: 1.55
7Lk : Distance among each indoor unit[m],
Ak: Power cable specification[mm2], ik : Running current of each unit[A]
installing your air conditioner _33
Indoor Unit Setting
Additional Functions
1. Before installing the indoor unit, assign an address to the
indoor unit according to the air conditioning system plan.
2. The address of the indoor unit is assigned by adjusting
MAIN(SW01, SW02) and RMC(SW03, SW04) rotary switches.
K1K2K3K4
No.
Function
ON
OFF
K1
External room sensor
Not use
Use
K2
Centralized controller
Not use
Use
Slim 1way/2way/mini 4way
N/A
N/A
4way
Normal
Up
N/A
N/A
SW05
K3 RPM up
SW01
SW02
SW03
SW04
K4
Option drain pump
K N/A : Not Available
K K1 OFF
Heating mode : Setting temperature compensation value = 0°C
Thermo OFF £ Fan OFF
K1K2K3K4
K5K6K7K8
K9K10K11K12
J The designs and shape are subject to change according
to the model.
Setting MAIN Address
No.
X The MAIN address is for communication between the
indoor unit and the outdoor unit. Therefore, you must
set it to operate the air conditioner properly.
X You can set the MAIN address from ‘00’ to ‘99’ by mixing
SW01 and SW02.
The MAIN address from ‘00’ to ‘99’ should differ from
each other.
X Check the indoor unit address on the plan that you are
to install and set the address according to the plan.
Note
You may not need to set MAIN address if you
selected Auto Address Setting from the outdoor
unit: see details on the outdoor unit installation
manual.
For Example
K5K6K7K8
Function
Heating
K5 thermo-off
SW06
ON
OFF
Slim 1way/2way
+2°C
+5°C
mini 4way/4way
+5°C
+2°C
K6
Filter signal display
1000
hours
2000
hours
K7
Hot water coil
N/A
N/A
K8
Electrical heater
N/A
N/A
K N/A : Not Available
When MAIN address is set as “12”.
K9K10K11K12
No.
Setting RMC Address
X You must set the SW03, SW04 and K2 switch when using
the centralized controller.
For Example
When RMC address is set as “12”.
SW03
SW04
34_ installing your air conditioner
K9
Function
ON
OFF
Min. EEV step at heating
Fix 80 step
0 or 80 step
Slave
Master
Priority of indoor unit
K10 display on wired remote
SW07
controller
K11
External control
Not Use
Use
K12
Operation output
Thermo ON
Operation ON
K N/A : Not Available
MEMO
ENGLISH
memo _35
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
UK
0330 SAMSUNG (7267864)
www.samsung.com/uk/support
IRELAND (EIRE)
0818 717100
www.samsung.com/ie/support
GERMANY
06196 77 555 77 *OTH
www.samsung.com/de/support
FRANCE
01 48 63 00 00
www.samsung.com/fr/support
ITALIA
800-SAMSUNG (800.7267864)
www.samsung.com/it/support
SPAIN
0034902172678
www.samsung.com/es/support
PORTUGAL
808 207 267
www.samsung.com/pt/support
LUXEMBURG
261 03 710
www.samsung.com/be_fr/
support
NETHERLANDS
COUNTRY
CALL
OR VISIT US ONLINE AT
BULGARIA
*3000 Цена в мрежата
0800 111 31 , Безплатна
телефонна линия
www.samsung.com/bg/support
ROMANIA
*8000 (apel in retea)
08008-726-78-64
(08008-SAMSUNG) Apel
GRATUIT
www.samsung.com/ro/support
CYPRUS
8009 4000 only from landline,
toll free
GREECE
80111-SAMSUNG (80111 726
7864) only from land line
(+30) 210 6897691 from mobile
and land line
LITHUANIA
8-800-77777
www.samsung.com/lt/support
LATVIA
8000-7267
www.samsung.com/lv/support
ESTONIA
800-7267
www.samsung.com/ee/support
www.samsung.com/eg/support
088 90 90 100
www.samsung.com/nl/support
BELGIUM
02-201-24-18
www.samsung.com/be/support
(Dutch)
www.samsung.com/be_fr/
support (French)
NORWAY
21629099
www.samsung.com/no/support
DENMARK
707 019 70
www.samsung.com/dk/support
EGYPT
08000-7267864
16580
www.samsung.com/gr/support
FINLAND
030-6227 515
www.samsung.com/fi/support
IRAN
021-8255 [CE]
www.samsung.com/iran/support
SWEDEN
0771 726 786
www.samsung.com/se/support
Israel
*6963
www.samsung.com/il/support/
SAUDI ARABIA
http://www.samsung.com/pl/
support/
(+966) 8002474357 (800 24/7
HELP)
POLAND
801-172-678* lub +48 22 60793-33*
Dedykowana infolinia do obsługi
zapytań dotyczących telefonów
komórkowych:
801-672-678* lub +48 22 60793-33*
* (opłata według taryfy operatora)
www.samsung.com/sa_en/
support (English)
www.samsung.com/sa/support
(Arabic)
PAKISTAN
0800-Samsung (72678)
www.samsung.com/pk/support
U.A.E
800-SAMSUNG (800 - 726 7864)
HUNGARY
0680SAMSUNG (0680-7267864)
www.samsung.com/hu/support
AUSTRIA
0800-SAMSUNG (08007267864)
[Only for KNOX customers] 0800
400848
[Only for Premium HA] 0800366661
[Only for Dealers] 0810-112233
[Only for E-Store] 0800 100 232
SWITZERLAND
0800 726 78 64
(0800-SAMSUNG)
800-SAM CS (800-72627)
183-CALL (183-2255)
BAHRAIN
8000-GSAM (8000-4726)
QATAR
800-CALL (800-2255)
TURKEY
444 77 11
JORDAN
0800-22273
06 5777444
www.samsung.com/at/support
www.samsung.com/ch/support
(German)
www.samsung.com/ch_fr/
support (French)
CZECH
800 - SAMSUNG
(800-726786)
SLOVAKIA
0800 - SAMSUNG
(0800-726 786)
www.samsung.com/sk/support
CROATIA
072 726 786
www.samsung.com/hr/support
BOSNIA
055 233 999
www.samsung.com/support
MONTENEGRO
020 405 888
www.samsung.com/support
SLOVENIA
OMAN
KUWAIT
www.samsung.com/cz/support
SYRIA
962 5777444
Lebanon
1299
Iraq
80010080
011 321 6899
www.samsung.com/rs/support
ALBANIA
045 620 202
www.samsung.com/al/support
SAMSUNG ELECTRONICS CO., LTD.
107, Hanamsandan 6beon-ro, Gwangsan-gu, Gwangju-si, Korea 62218
Samsung Electronics
Service Department
PO Box 12987, Blackrock, Co. Dublin. Ireland
or
Blackbushe Business Park, Yateley, GU46 6GG. UK
“AEEE Yönetmeligine Uygundur”
www.samsung.com/tr/support
www.samsung.com/levant/
support
ALGERIA
3004
TUNISIA
80 100 012
MOROCCO
080 100 22 55
U.S.A
- Consumer
Electronics
- Mobile Phones
1-800-SAMSUNG (726-7864)
1-844-SAM-PAYS (726-7297)
www.samsung.com/us/support
CANADA
1-800-SAMSUNG(726-7864)
1-844-SAM-PAYS (726-7297)
www.samsung.com/ca/support
(English)
www.samsung.com/ca_fr/
support (French)
INDIA
1800 40 SAMSUNG (1800 40
7267864) (Toll-Free)
www.samsung.com/in/support
080 697 267 (brezplačna številka) www.samsung.com/si/support
SERBIA
www.samsung.com/ae/support
(English)
www.samsung.com/ae_ar/
support (Arabic)
www.samsung.com/n_africa/
support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising