Samsung | UM46N-E | Quick Setup Guide | Samsung UH46N-E Quick Setup Guide

Samsung UH46N-E Quick Setup Guide
Reverse Side
2 Supplies power to the external sensor board or receives the
light sensor signal.
DVI IN
(MAGICINFO)
3
CONTROL IN
2
Quick Setup Guide
1 Receives the remote control signal via the external sensor
board and outputs the signal via LOOP OUT.
IR
OUT
1
3 DVI IN: Connects to a source device using a DVI cable or
HDMI-DVI cable.
MAGICINFO: To use MagicInfo, make sure to connect the DPDVI cable.
HDMI IN 1
4 Connects to a source device using an HDMI cable.
UH46N-E UM46N-E
5 Connects to a PC using a DP cable.
6 Connects to a source device using a D-SUB cable.
4
HDMI IN 2
7 Connects to another product using a DP cable.
5
ON
RS232C(IN) adapter
Holder-Ring x 4 /
Screw x 4
Solutions
Check the cable connection between the product and PC, and ensure the connection is secure.
Check that the product is connected corNo Signal is displayed rectly with a cable.
on the screen.
Check that the device connected to the
product is powered on.
2 Light sensor
Automatically detects the intensity of ambient light around a
selected display and adjusts the screen brightness.
3 Power indicator
The power indicator will turn off when the product is turned on.
It will blink in power-saving mode.
4 POWER button
Use this button for turning the LCD Display on and off.
DP cable
RJ45
The screen keeps
switching on and off.
2
1 Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
* Keep the area between the remote sensor and remote control
obstacle-free.
Remote Control
USB
Issues
1
4
Batteries
(Not available in some
locations)
IN
Troubleshooting Guide
3
Power cord
RS232C
External sensor KIT
5
AUDIO
OUT
BN68-09339H-00
!
@
IN
0
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
OUT
8
9
@@Connects to MDC using a LAN cable. (10/100 Mbps)
DP OUT
(LOOPOUT)
7
Warranty card
MagicInfo Software
Quick Setup Guide (Not available in some
DVD
locations)
00Connects to MDC using an RS232C adapter.
RGB IN
6
* Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
* Contact the vendor where you purchased the product if any
components are missing.
* The pictures may look different from the actual components.
9 Outputs sound to an audio device via an audio cable.
!!Connect to a USB memory device. (Only for update purpose)
* The colour and the appearance may differ depending on the product, and the content in
the manual is subject to change without prior notice to improve the performance.
Checking the Components
8 Receives sound from a source device via an audio cable.
DP IN
* WARNING: Please ensure this product is inspected by yourself (to identify if there are
any defects) prior to any installation. Any defect should be brought to the attention of
Samsung as soon as discovered. Please do not install the product if it appears to have a
defect. Any damage caused by carelessness in the process of installing the product will be
treated as damage caused by yourself (and not a product defect). To determine whether
or not this product has been installed Samsung will view evidence of the screw hole label
being pierced (as well as any other cosmetic evidence of an installation).
5 SOURCE button
Switches from PC mode to Video mode.
Selects the input source that an external device is connected to.
This message is displayed when a signal
from the graphics card exceeds the prodNot Optimum Mode is uct’s maximum resolution and frequency.
displayed.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the
screen look distorted.
Check the cable connection to the product.
White does not really
look white.
The product will turn
off automatically.
Remove any accessories (video extension
The screen is not clear.
cable, etc) and try again.
The screen is blurry.
Set the resolution and frequency to the
recommended level.
The screen appears
Check that the resolution and frequency of the
unstable and shaky.
PC and graphics card are set within a range
compatible with the product. Then, change the
There are shadows or screen settings if required by referring to the
ghost images left on
Additional Information on the product menu
the screen.
and the Standard Signal Mode Table.
Solutions
Go to Picture and adjust the White Balance settings.
Go to System and make sure Sleep Timer
is set to Off.
If a PC is connected to the product, check
the power status of the PC.
Make sure the power cable is connected
properly to the product and power outlet.
If the signal from a connected device is
not detected, the product automatically
turns off after 10 to 15 minutes.
There is no sound.
Check the connection of the audio cable
or adjust the volume.
Check the volume.
Adjust Coarse and Fine.
The screen is too bright.
Adjust Brightness and Contrast.
The screen is too dark.
BN68-09339H-00_QSG_UH46N-E_UM46N-E_INDIA_ENG.indd 1
Issues
Adjust the volume.
The volume is too low. If the volume is still low after turning it up
to the maximum level, adjust the volume on
your PC sound card or software programme.
Make sure that the batteries are correctly
in place (+/-).
The remote control
does not work.
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon
signs switched on in the vicinity.
2019-01-03 오후 4:44:44
DVI/PC/MAGICINFO IN
AUDIO OUT
Connecting
HDMI IN 1, HDMI INand
2 IN Using a Source Device
DVI/PC/HDMI/AUDIO
Specifications
HDMI IN 1, HDMI IN 2
Connecting to a PC
RGB IN
DP IN
DP IN
AUDIO IN
DVI IN (MAGICINFO)
DVI IN (MAGICINFO)
Connecting the LAN Cable
RJ45
Size
116.8 cm
Display area
HDMICat7(*STP
IN 1, HDMI INType)
2
Use
cable for the connection.
*Shielded Twist Pair
Connecting an External Monitor
HDMI IN 1, HDMI IN 2
HDMI IN 1, HDMI IN 2
To use old and new models together, first contact the dealer the
DVI IN (MAGICINFO)
product
was purchased from to check if they are compatible.
1018.08 mm (H) x 572.67 mm (V)
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Power Supply
DP OUT (LOOPOUT)
Environmental
considerations
Operating
Temperature: 0 ℃ - 40 ℃ (32 ℉ - 104 ℉)
Humidity: 10 % - 80 %, non-condensing
Storage
Temperature: -20 ℃ - 45 ℃ (-4℉ - 113℉)
Humidity: 5 % - 95 %, non-condensing
* This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to
take adequate measures.
* For detailed device specifications, visit the Samsung Electronics website.
* The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
- Accessory cables: signal cables and power cords
RS232C IN
Warning! Important Safety Instructions
RS232C OUT
AUDIO IN
AUDIO IN
UH46N-E / UM46N-E
Panel
AUDIO IN
AUDIO IN
DCJ: AV/COMPONENT IN
Model Name
Connecting
to MDCIN
DVI/PC/HDMI/AUDIO
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.
CAUTION
HDMI IN 1, HDMI IN 2
RISK OF ELECTRIC SHOCK DO NOT OPEN
DCJ:
HDMIDVI/HDMI/AUDIO
IN 1, HDMI IN 2 IN
DVI/PC/MAGICINFO IN
DVI/PC/MAGICINFO IN
RS232C IN
RJ45
HDMI IN 1, HDMI IN 2
RS232C OUT
RS232C OUT
DP INAV/COMPONENT
DVI/PC/HDMI/AUDIO
ININ
DCJ:
DVI/PC/HDMI/AUDIO IN
ꞏꞏIf your equipment uses an AC adapter:
DVI/PC/HDMI/AUDIO IN
DP IN
DCJ:
DVI/HDMI/AUDIOININ
DCJ: DVI/HDMI/AUDIO
RGB IN
DVI IN (MAGICINFO)
RGB IN
Connecting
to a Video Device
DVI IN (MAGICINFO)
AUDIO
IN
DCJ: AV/COMPONENT
IN
AUDIO
IN
HDMI
AUDIOININ1, HDMI IN 2
AUDIO IN
DCJ: DVI/HDMI/AUDIO
IN
AUDIO
IN
HDMI IN 1, HDMI IN 2
HDMI IN 1, HDMI IN 2
HDMI
ININ1, HDMI IN 2
AUDIOIN
HDMI
1, HDMI IN 2
AUDIO
OUT
AUDIO IN
AUDIO IN
DVI/PC/MAGICINFO IN
Connecting
to an Audio System
DP IN
DVI/PC/MAGICINFO IN
RJ45
RJ45
RS232C IN
HUB
DVI/PC/MAGICINFO IN
RS232C OUT
RS232C OUT
DVI/PC/HDMI/AUDIO IN
RS232C IN
RJ45
RJ45
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
HUB
RGB IN
RS232C OUT
- Only use the AC adapter with your product by
Samsung.
- Do not use the power cord with other products.
ꞏꞏDo not install this equipment in a confined space such as a case or
similar.
ꞏꞏThe slots and openings in the cabinet and in the back or bottom are
provided for necessary ventilation. The slots and openings must
never be blocked or covered.
ꞏꞏThe product should be located away from heat sources such as
radiators, heat registers, or other products that produce heat.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact with
any internal part of this product.
This symbol indicates that this product has included
important literature concerning operation and maintenance.
ꞏꞏDo not place a water containing vessel (vases etc.) on this
apparatus, as this can result in a risk of fire or electric shock.
(Apparatus shall not be exposed to dripping or splashing)
ꞏꞏThe apparatus must be connected to an earthed MAINS socketoutlet (Class l Equipment only). Or Use only a properly grounded
plug and receptacle (Class l Equipment only).
ꞏꞏTo disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
ꞏꞏAs long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by POWER.
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other
types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers
- 1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
AUDIO IN
RS232C IN
For
details on how to use the MDC programme, refer to Help after
RJ45
HUB
installing the programme.
The MDC programme is available on the website.
http://www.samsung.com/displaysolutions
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
AUDIO
OUT
DVI/PC/HDMI/AUDIO
IN
DVI/PC/HDMI/AUDIO IN
DVI IN (MAGICINFO)
RS232C IN
RGB IN
AUDIO IN
RGB IN
AUDIO IN
BN68-09339H-00_QSG_UH46N-E_UM46N-E_INDIA_ENG.indd
2
AUDIO IN
2019-01-03 오후 4:44:47
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising