Samsung | HW-Q70R | User manual | Samsung Samsung Harman Kardon HW-Q70R Cinematic soundbar with Dolby Atmos and dts:X User manual

Samsung Samsung Harman Kardon HW-Q70R Cinematic soundbar with Dolby Atmos and dts:X User manual
FULL MANUAL
HW-Q70R
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at www.samsung.com/register
SAFETY INFORMATION
SAFETY WARNINGS
WARNING
•• To reduce the risk of fire or electric shock, do
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
not expose this appliance to rain or moisture.
NOT REMOVE THE COVER (OR BACK).
CAUTION
NO USER-SERVICEABLE PARTS ARE INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Refer to the table below for an explanation of
symbols which may be on your Samsung product.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that high voltage
is present inside. It is dangerous to
make any kind of contact with any
internal part of this product.
This symbol indicates that this product
has included important literature
concerning operation and maintenance.
Class II product : This symbol indicates
that it does not require a safety
connection to electrical earth (ground).
If this symbol is not present on a
product with a power cord, the product
MUST have a reliable connection to
protective earth (ground).
AC voltage : This symbol indicates that
the rated voltage marked with the
symbol is AC voltage.
DC voltage : This symbol indicates that
the rated voltage marked with the
symbol is DC voltage.
Caution, Consult instructions for use :
This symbol instructs the user to
consult the user manual for further
safety related information.
•• TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
•• This apparatus shall always be connected to a
AC outlet with a protective grounding
connection.
•• To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be
readily operable.
•• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
•• To turn this apparatus off completely, you
must pull the power plug out of the wall
socket. Consequently, the power plug must
be easily and readily accessible at all times.
Wiring the Main Power Supply
Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with
a moulded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug
and if it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed.
If the cover is detachable and a replacement is
required, it must be of the same colour as the fuse
fitted in the plug. Replacement covers are
available from your dealer. If the fitted plug is not
suitable for the power points in your house or the
cable is not long enough to reach a power point,
you should obtain a suitable safety approved
extension lead or consult your dealer for assistance.
ENG - ii
However, if there is no alternative to cutting off the
2. During thunderstorms, disconnect the AC
plug, remove the fuse and then safely dispose of
plug from the wall outlet. Voltage peaks due
the plug. Do not connect the plug to a mains
to lightning could damage the unit.
socket as there is a risk of shock hazard from the
3. Do not expose the unit to direct sunlight or
bared flexible cord. Never attempt to insert bare
other heat sources. This could lead to
wires directly into a mains socket. A plug and fuse
overheating and cause the unit to
must be used at all times.
malfunction.
4. Protect the product from moisture (i.e.
IMPORTANT
vases), and excess heat (e.g. a fireplace) or
The wires in the mains lead are coloured in
equipment creating strong magnetic or
accordance with the following code:– BLUE =
electric fields. Unplug the power cable from
NEUTRAL BROWN = LIVE As these colours may not
the AC wall socket if the unit malfunctions.
correspond to the coloured markings identifying
Your product is not intended for industrial
the terminals in your plug, proceed as follows:– The
use. It is for personal use only. Condensation
wire coloured BLUE must be connected to the
may occur if your product has been stored in
terminal marked with the letter N or coloured
cold temperatures. If transporting the unit
BLUE or BLACK. The wire coloured BROWN must
during the winter, wait approximately
be connected to the terminal marked with the
2 hours until the unit has reached room
letter L or coloured BROWN or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E OR BY THE EARTH SYMBOL
temperature before using.
5. The battery used with this product contains
,
chemicals that are harmful to the
OR COLOURED GREEN OR GREEN AND YELLOW.
environment. Do not dispose of the battery
PRECAUTIONS
expose the battery to excess heat, direct
in the general household trash. Do not
sunlight, or fire. Do not short circuit,
1. Ensure that the AC power supply in your
disassemble, or overheat the battery.
house complies with the power
Danger of explosion if the battery is replaced
requirements listed on the identification
incorrectly. Replace only with the same or
sticker located on the bottom of your
product. Install your product horizontally, on
a suitable base (furniture), with enough
space around it for ventilation (7~10 cm).
Make sure the ventilation slots are not
covered. Do not place the unit on amplifiers
or other equipment which may become hot.
This unit is designed for continuous use. To
fully turn off the unit, disconnect the AC plug
from the wall outlet. Unplug the unit if you
intend to leave it unused for a long period of
time.
ENG - iii
equivalent type.
ABOUT THIS MANUAL
The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can
download.
USER MANUAL
See this manual for safety instructions, product installation,
components, connections, and product specifications.
FULL MANUAL
You can access the FULL MANUAL on Samsung’s on-line
customer support centre by scanning the QR code on the left.
To see the manual on your PC or mobile device, download the
manual in document format from Samsung’s website.
(http://www.samsung.com/support)
Design, specifications, and App screen are subject to change without prior notice.
CONTENTS
01
Checking the Components
Inserting Batteries before using the Remote Control (AA batteries X 2)
02
03
--------------------------
Product Overview
2
3
Front Panel / Right Side Panel of the Soundbar
--------------------------
3
Bottom Panel of the Soundbar
--------------------------
4
Connecting the Soundbar
Connecting Electrical Power
04
2
5
--------------------------
5
Connecting the Soundbar to the Subwoofer
–– Automatic connection between the Subwoofer and the Soundbar
–– Manually connecting the Subwoofer if automatic connection fails
----------------------------------------------------------------------------
6
6
7
Connecting an SWA-8500S (Sold Separately) to your Soundbar
--------------------------
8
Connecting to your TV
10
Method 1. Connecting with a Cable
–– Connecting a TV using an HDMI Cable
–– Connecting using an Optical Cable
-------------------------- 10
-------------------------- 10
-------------------------- 11
Method 2. Connecting Wirelessly
–– Connecting a TV via Bluetooth
–– Connecting via Wi-Fi
-------------------------- 12
-------------------------- 12
-------------------------- 14
ENG - iv
05
06
07
08
09
10
Connecting an External Device
16
Connecting using an HDMI Cable (Capable of Dolby Atmos decoding
and playback)
-------------------------- 16
Connecting using an HDMI Cable
-------------------------- 17
Connecting using an Optical Cable
-------------------------- 18
Connecting a Mobile Device
19
Connecting via Bluetooth
-------------------------- 19
Connecting via Wi-Fi (Wireless Network)
-------------------------- 22
Connecting an Amazon product
24
Connect and use with an Amazon product (Amazon Echo)
-------------------------- 24
Use voice commands to control the Soundbar
-------------------------- 26
Using the Remote Control
27
How to Use the Remote Control
-------------------------- 27
Adjusting the Soundbar volume with a TV remote control
-------------------------- 30
Using the Hidden Buttons (Buttons with more than one function)
-------------------------- 31
Output specifications for the different sound effect modes
-------------------------- 31
Installing the Wall Mount
32
Installation Precautions
-------------------------- 32
Wallmount Components
-------------------------- 32
Installing the Holder-Feet
Holder-Feet Components
34
-------------------------- 34
11
Software Update
35
12
Troubleshooting
36
13
Licence
37
14
Open Source Licence Notice
38
15
Important Notes About Service
38
Specifications and Guide
39
16
Specifications
-------------------------- 39
ENG - v
01 CHECKING THE COMPONENTS
PAIR
SOUND
MODE
VOL
WOOFER
SOUNDBAR
Soundbar Main Unit
1
Subwoofer
Remote Control / Batteries
3
x2
Power Cord
(Subwoofer)
AC/DC Adapter
(Main Unit)
Holder-Foot
2
x2
Holder-Support
x2
Screw
(Holder-Foot)
Connect the AC plug to the adapter until
you hear a “snapping” sound to ensure
they are securely fastened.
Do not detach the AC plug from the
adapter (it will not be removed once it
has been attached).
AC Plug
(Depending on the country and model)
x2
Wall Mount Guide
Holder-Screw
x2
Bracket-Wall Mount
x2
Screw
(Wall Mount)
•• For more information about the power supply and power consumption, refer to the label attached
to the product. (Label: Bottom of the Soundbar Main Unit)
•• The power components are labelled (1, 2, 3). For more information about power connections,
see page 5.
•• To purchase additional components or optional cables, contact a Samsung Service Centre or
Samsung Customer Care.
•• Depending on the region, the appearance of the AC plug may differ from the plug displayed above,
or it may be supplied integrated with the AC/DC adapter.
•• The appearance of the accessories may differ slightly from the illustrations above.
Inserting Batteries before using the Remote Control (AA batteries X 2)
Slide the battery cover in the direction of the arrow
until it is completely removed. Insert 2 AA batteries
(1.5V) oriented so that their polarity is correct. Slide
the battery cover back into position.
ENG - 2
02 PRODUCT OVERVIEW
Front Panel / Right Side Panel of the Soundbar
Right Side of the Soundbar
Position the product so that the
"Samsung Harman Kardon" logo is
located on the top.
Display
Displays the product’s status and current mode.
+/- (Volume) Button
Adjusts the volume.
•• When adjusted, the volume level appears on the Soundbar’s front display.
(Power) Button
Turns the power on and off.
•• Auto Power Down Function
The unit turns off automatically in the following situations:
–– In D.IN / HDMI / WIFI / BT mode if there is no audio signal for 18 minutes.
(Source) Button
Selects the source input mode.
Input mode
Display
Optical Digital input
D.IN
ARC (HDMI OUT) input
D.IN  TV ARC (Auto conversion)
HDMI input
HDMI
Wi-Fi mode
WIFI
BLUETOOTH mode
BT
•• When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.
•• When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
•• If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in the Audio
Setup menu of your TV. Refer to the owner’s manual supplied with your TV.
ENG - 3
Bottom Panel of the Soundbar
NETWORK
Press to connect to a wireless network (Wi-Fi) via the SmartThings app.
SERVICE
Connect a USB storage device to upgrade the product's software.
DC 19V (Power Supply In)
Connect the AC/DC power adapter.
HDMI IN
Inputs digital video and audio signals simultaneously using an HDMI cable.
Connect to the HDMI output of an external device.
HDMI OUT (TV-ARC)
Connect to the HDMI (ARC) jack on a TV.
DIGITAL AUDIO IN (OPTICAL)
Connect to the digital (optical) output of an external device.
•• When disconnecting the power cable of the AC/DC power adaptor from a wall outlet, pull the plug.
Do not pull the cable.
•• Do not connect this unit or other components to an AC outlet until all connections between
components are complete.
ENG - 4
03 CONNECTING THE SOUNDBAR
Connecting Electrical Power
Use the power components (1, 2, 3) to connect the Subwoofer and Soundbar to an electrical outlet in
the following order:
1 Connect the power cord to the Subwoofer.
2 Connect the AC plug to the adapter.
3 Connect the power adapter to the Soundbar and then to a wall socket.
See the illustrations below.
•• For more information about the required electrical power and power consumption, refer to the
label attached to the product. (Label: Bottom of the Soundbar Main Unit)
2 AC Plug
3 AC/DC Adapter
POWER
Rear of Subwoofer
1 Power Cord
DC 19V
(Power Jack)
Bottom of the
Connecting
Electrical Power
Soundbar Main Unit
ENG - 5
Connecting the Soundbar to the Subwoofer
When the subwoofer is connected, you can enjoy rich bass sound.
Automatic connection between the Subwoofer and the Soundbar
When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the
subwoofer is automatically connected to the Soundbar.
•• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
LED Indicator Lights on the Rear of Subwoofer
LED
Status
On
Description
Successfully connected
(normal operation)
Resolution
Check if the power cable attached to the
Blue
main Soundbar unit is connected properly
Blinking
Recovering the connection
or wait about 5 minutes. If blinking persists,
try manually connecting the subwoofer.
See page 7.
Red
On
Standby (with the Soundbar
Check if the power cable attached to the
main unit turned off)
main Soundbar unit is connected properly.
Connect again. See the instructions for
Connection failed
Red and
blue
Blinking
manual connection on page 7.
See the contact information for the
Malfunction
Samsung Service Centre in this manual.
ENG - 6
Manually connecting the Subwoofer if automatic connection fails
Before performing the manual connection procedure below:
•• Check whether the power cables for the Soundbar and subwoofer are connected properly.
•• Make sure that the Soundbar is turned on.
1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.
•• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.
5 Sec
Rear of Subwoofer
2. Press and hold the Up button on the remote control for at least 5 seconds.
•• The ID SET message appears on the display of the Soundbar for a moment, and then it
disappears.
•• The Soundbar will automatically power on when ID SET is complete.
PAIR
5 Sec
“Samsung Harman Kardon” logo is on the top
ID SET
ND
SOUODE
M
3. Check if the LINK LED is solid blue (connection complete).
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Subwoofer.
Blue is On
ENG - 7
NOTES
•• Do not connect the power cord of this product or your TV to a wall outlet until all connections
between components are complete.
•• Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
•• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the
STANDBY LED on the rear of the sub-woofer will turn red after blinking in blue several times.
•• If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar,
interference may cause some sound interruption.
•• The maximum transmission distance of the main unit’s wireless signal is about 10 meters, but may
vary depending on your operating environment. If a steel-concrete or metallic wall is between the
main unit and the wireless subwoofer, the system may not operate at all because the wireless
signal cannot penetrate metal.
PRECAUTIONS
•• Wireless receiving antennas are built into the wireless subwoofer. Keep the unit away from water
and moisture.
•• For optimal listening performance, make sure that the area around the wireless subwoofer and the
Wireless Receiver Module (sold separately) is clear of any obstructions.
Connecting an SWA-8500S (Sold Separately) to your Soundbar
Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit
(SWA-8500S, sold separately) to your Soundbar.
1. Connect the Wireless Receiver Module to 2 Surround Speakers.
–– The speaker cables are colour coded.
L
SURROUND-LEFT
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
SURROUND-RIGHT
ID SET
L
R
SURROUND-LEFT
SURROUND-RIGHT
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE
: 3Ω
POWER
ID SET
ENG - 8
2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet.
•• The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not
blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for
5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer
to the SWA-8500S user manual.
STANDBY
SURROUND SPEAKERS OUT
SPEAKER
IMPEDANCE : 3Ω
L
R
5 Sec
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
STANDBY
ID SET
ID SET
LINK
LINK
POWER
Blue blinking
POWER
3. Press and hold the Up button on the remote control for at least 5 seconds.
•• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears.
•• The Soundbar will automatically power on when ID SET is complete.
“Samsung Harman Kardon” logo is on the top
5 Sec
PAIR
ID SET
ND
SOUODE
M
CAUTION
•• If your Soundbar was playing music when it connects to the SWA-8500S, you may hear some
stuttering from the woofer as the connection finalises.
4. Check if the LINK LED is solid blue (connection complete).
STANDBY
STANDBY
LINK
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
LINK
established between the Soundbar and the
Wireless Receiver Module.
Blue is On
5. If the SWA-8500S is not connected, repeat the procedure from Step 2.
ENG - 9
04 CONNECTING TO YOUR TV
Hear TV sound from your Soundbar through wired or wireless connections.
•• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using
the TV’s remote control.
–– This feature is available on 2017 and later Samsung Smart TVs that support Bluetooth when
the Soundbar is connected to the TV using an optical cable.
–– This function also allows you to use the TV menu to adjust the sound field and various settings
as well as the volume and mute.
Method 1. Connecting with a Cable
When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on
your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on
the TV is changed, you will experience better sound quality. (The TV menu may use different words for
Dolby Digital and PCM depending on the TV manufacturer.)
Connecting a TV using an HDMI Cable
Connect to the HDMI IN
(ARC) port of your TV.
Bottom of the Soundbar
HDMI IN
(ARC)
HDMI Cable
(not supplied)
Connect to the HDMI OUT (TV-ARC)
port of the Soundbar main unit.
TV ARC
Right Side of the Soundbar
1. With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2. “TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
•• If TV sound is inaudible, press the
(Source) button on the remote control or on the right side
of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence,
and TV sound is played.
ENG - 10
•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the
HDMI cable (not supplied) is connected to the correct port.
•• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.
NOTES
•• HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
•• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
•• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 14 mm.
•• Anynet+ must be turned on.
•• This function is not available if the HDMI cable does not support ARC.
Connecting using an Optical Cable
Bottom of the Soundbar
OPTICAL OUT
Optical Cable
(not supplied)
D.IN
Right Side of the Soundbar
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital optical cable (not supplied).
2. Press the
(Source) button on the right side panel or remote control, and then select the “D.IN”
mode.
ENG - 11
Auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1. Connect the Soundbar and a TV with a digital optical cable (not supplied).
2. Press the Left button on the remote control for 5 seconds to turn Auto Power
Link on or off.
•• Auto Power Link is set to ON by default.
(To turn off this function, press the Left button on the remote for 5 seconds.)
•• Depending on the connected device, Auto Power Link may not function.
•• This function is only available in the “D.IN” mode.
Method 2. Connecting Wirelessly
Connecting a TV via Bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
•• Only one TV can be connected at a time.
PAIR
OR
ND
SOUODE
M
The initial connection
1. Press the
PAIR button on the remote control to enter the “BT PAIRING” mode.
(OR) a. Press the
(Source) button on the right side panel and then select “BT”.
“BT” changes to “BT READY” in a few seconds automatically if there is no Bluetooth device
connected to the Soundbar.
b. When “BT READY” appears, press and hold the
(Source) button on the right side panel
of the Soundbar for more than 5 seconds to display “BT PAIRING”.
2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)
3. Select “[AV] Samsung Soundbar Q70R” from the list on TV’s screen.
An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection.
•• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.
4. You can now hear TV sound from the Soundbar.
ENG - 12
If the device fails to connect
•• If a previously connected Soundbar (e.g. “[AV] Samsung Soundbar Q70R”) appears in the list, delete
it.
•• Then repeat steps 1 through 3.
NOTE
•• After you have connected the Soundbar to your TV the first time, use the “BT READY” mode to
reconnect.
Disconnecting the Soundbar from the TV
Press the
(Source) button on the right side panel or on the remote control and switch to any mode
but “BT”.
•• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
•• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the
p (Play/Pause) button on the remote control for 5 seconds with the Soundbar in “BT READY” status.
(Toggle On → Off)
What is the difference between BT READY and BT PAIRING?
•• BT READY : In this mode, you can search for previously connected TVs or connect a previously
connected mobile device to the Soundbar.
•• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the
on the remote control or press and hold the
PAIR button
(Source) button on the right side of the Soundbar
for more than 5 seconds while the Soundbar is in “BT” mode.)
NOTES
•• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
•• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
•• The Soundbar automatically turns off after 18 minutes in the Ready state.
•• The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–– If there is a strong electrical field around the Soundbar.
–– If several Bluetooth devices are simultaneously paired with the Soundbar.
–– If the Bluetooth device is turned off, not in place, or malfunctions.
•• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
ENG - 13
Connecting via Wi-Fi
Pre-connection Checklist
1. Confirm that your Samsung Smart TV was released after 2013. This function is compatible only
with Samsung Smart TVs released after 2013.
2. Make sure your Wireless router (Wi-Fi) is ready and working.
3. Make sure that the TV is connected to the Wireless router (your Wi-Fi network).
Right Side of the Soundbar
Step 1 : Connecting the Soundbar to Wi-Fi
1. Press the
(Source) button on the right side of the Soundbar or on the remote control to select
“WIFI” mode.
•• When using selected Samsung TVs (2016 ~ 2018 Samsung Smart TVs that support Bluetooth.)
–– If you select “WIFI” mode when the TV is turned on, the TV screen displays a pop-up
window providing instructions on how to automatically connect the Soundbar to a wireless
router (Wi-Fi). Refer to the instructions in the pop-up window of the TV.
Right Side of the Soundbar
WIFI
2. Connect your mobile device (smartphone, tablet, etc.) to the Wi-Fi network the TV is connected to.
ENG - 14
3. Install and launch the SmartThings app on your mobile device (smartphone, tablet, etc.).
Android
iOS
SmartThings app
4. Follow the instructions in the app screen on the mobile device to connect the Soundbar to your
Wi-Fi network.
Step 2 : Configuring Settings on the TV
•• If the TV disconnects from your wireless network after you change the input source to the
Soundbar, use the TV menu to connect the TV to the network again.
For TVs released in 2019
Home (
)  Settings (
)  Sound  Sound Output  [AV] Samsung Soundbar Q70R (Wi-Fi)
For TVs released in 2018
Home (
)  Settings (
)  Sound  Sound Output  [AV] Samsung Soundbar Q70R (Wi-Fi)
For TVs released in 2017
Home (
)  Settings (
)  Sound  Sound Output  [AV] Samsung Soundbar Q70R (Wi-Fi)
For TVs released in 2016
Home (
)  Settings (
)  Sound  Select Speaker  [AV] Samsung Soundbar Q70R (Wi-Fi)
For TVs released in 2015
Menu  Sound  Speaker List
For TVs released in 2014
Menu  Sound  Speaker Settings  Multiroom Link - Settings
NOTES
•• The TV and Soundbar must be connected to the same wireless network (Wi-Fi).
•• If your wireless router (Wi-Fi) uses a DFS channel, you will not be able to establish a Wi-Fi
connection between the TV and Soundbar. Contact your Internet service provider for details.
•• If the 5GHz Wi-Fi connection is not smooth, use the 2.4GHz bandwidth.
•• Because the menus may differ depending on the year of manufacture, refer to your TV manual.
ENG - 15
05 CONNECTING AN EXTERNAL DEVICE
Connect to an external device via a wired or wireless network to play the external device’s sound
through the Soundbar.
Connecting using an HDMI Cable (Capable of Dolby Atmos decoding
and playback)
•• When you use Dolby Atmos®: If the input source is Dolby Atmos®, 3.1.2 channels are outputted.
When Dolby Atmos® is active, the Soundbar’s sound effect modes controlled by the SOUND MODE
button are not available.
•• Important: This product supports Dolby Atmos® only in HDMI mode.
HDMI OUT
External Device
Bottom of the Soundbar
HDMI Cable
(not supplied)
HDMI IN
(ARC)
HDMI Cable
(not supplied)
HDMI
Right Side of the Soundbar
1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the
HDMI OUT jack on your digital device.
2. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the
product to the HDMI IN jack on your TV.
3. Press the
(Source) button on the right side panel or on the remote control, and then select
“HDMI”.
4. “HDMI” mode is displayed on the Soundbar display panel and sound plays.
NOTE
•• When Dolby Atmos® is activated, “DOLBY ATMOS” appears in the front display.
ENG - 16
Configuring Dolby Atmos® on your BD player or other device.
•• Open the audio output options on the settings menu of your BD player or other device and make
sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to
Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).
•• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
•• Make sure that the content supports Dolby Atmos®.
Connecting using an HDMI Cable
HDMI OUT
External Device
Bottom of the Soundbar
HDMI Cable
(not supplied)
HDMI IN
(ARC)
HDMI Cable
(not supplied)
HDMI
Right Side of the Soundbar
1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the
HDMI OUT jack on your digital device.
2. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the
product to the HDMI IN jack on your TV.
3. Press the
(Source) button on the right side panel or on the remote control, and then select
“HDMI”.
4. “HDMI” mode is displayed on the Soundbar display panel and sound plays.
ENG - 17
Connecting using an Optical Cable
Bottom of the Soundbar
BD / DVD player /
Set-top box /
Game console
OPTICAL OUT
Optical Cable
(not supplied)
D.IN
Right Side of the Soundbar
1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source
Device using a digital optical cable (not supplied).
2. Select “D.IN” mode by pressing the
(Source) button on the right side panel or on the remote
control.
ENG - 18
06 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
•• You cannot connect more than one Bluetooth device at a time.
PAIR
OR
Bluetooth device
ND
SOUODE
M
The initial connection
1. Press the
PAIR button on the remote control to enter the “BT PAIRING” mode.
(OR) a. Press the
(Source) button on the right side panel and then select “BT”.
“BT” changes to “BT READY” in a few seconds automatically if there is no Bluetooth device
connected to the Soundbar.
b. When “BT READY” appears, press and hold the
(Source) button on the right side panel
of the Soundbar for more than 5 seconds to display “BT PAIRING”.
2. On your device, select “[AV] Samsung Soundbar Q70R” from the list that appears.
•• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → “BT”
appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
If the device fails to connect
•• If a previously connected Soundbar (e.g. “[AV] Samsung Soundbar Q70R”) appears in the list, delete
it.
•• Then repeat steps 1 and 2.
NOTE
•• After you have connected the Soundbar to your mobile device the first time, use the “BT READY”
mode to reconnect.
ENG - 19
What is the difference between BT READY and BT PAIRING?
•• BT READY : In this mode, you can search for previously connected TVs or connect a previously
connected mobile device to the Soundbar.
•• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the
on the remote control or press and hold the
PAIR button
(Source) button on the right side of the Soundbar
for more than 5 seconds while the Soundbar is in “BT” mode.)
NOTES
•• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
•• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
•• The Soundbar automatically turns off after 18 minutes in the Ready state.
•• The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–– If there is a strong electrical field around the Soundbar.
–– If several Bluetooth devices are simultaneously paired with the Soundbar.
–– If the Bluetooth device is turned off, not in place, or malfunctions.
•• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
•• The Soundbar supports SBC data (44.1kHz, 48kHz).
•• Connect only to a Bluetooth device that supports the A2DP (AV) function.
•• You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)
function.
•• Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar
Q70R” from the device’s scanned devices list will automatically change the Soundbar to “BT” mode.
–– Available only if the Soundbar is listed among the Bluetooth device’s paired devices.
(The Bluetooth device and the Soundbar must have been previously paired at least once.)
•• The Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is
displaying “BT READY”.
•• The Soundbar cannot be paired to another Bluetooth device if already in Bluetooth mode and
paired to a Bluetooth device.
ENG - 20
Disconnecting the Bluetooth device from a Soundbar
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s
user manual.
•• The Soundbar will be disconnected.
•• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
“BT DISCONNECTED” on the front display.
Disconnecting the Soundbar from the Bluetooth device
Press the
(Source) button on the right side panel or on the remote control, and then change to any
mode except “BT”.
•• Disconnecting takes time because the Bluetooth device must receive a response from the
Soundbar. (Disconnection time may differ, depending on the Bluetooth device)
•• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
“BT DISCONNECTED” on the front display.
NOTES
•• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
•• The Soundbar automatically turns off after 18 minutes in the Ready state.
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each
other using a short wireless connection.
•• A Bluetooth device may cause noise or malfunction, depending on usage, if:
–– A part of your body is in contact with the receiving/transmitting system of the Bluetooth
device or the Soundbar.
–– It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
–– It is exposed to electrical interference from same frequency-band devices including medical
equipment, microwave ovens, and wireless LANs.
•• Pair the Soundbar with the Bluetooth device while they are close together.
•• The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
•• In poor reception areas, the Bluetooth connection may not work properly.
•• The Bluetooth connection only works when it is close to the unit. The connection will be
automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality
may be degraded by obstacles such as walls or doors.
•• This wireless device may cause electric interference during its operation.
ENG - 21
Connecting via Wi-Fi (Wireless Network)
•• Connect a single Soundbar to Wi-Fi to access a variety of music streaming services and Internet
radio. Connect multiple Soundbars to Wi-Fi to use grouped playback or the stereo sound mode.
•• To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is
required.
Right Side of the Soundbar
Mobile device
The initial connection
1. Press the
(Source) button on the right side of the Soundbar or on the remote control to select
“WIFI” mode.
Right Side of the Soundbar
WIFI
2. Install and launch the SmartThings app on your mobile device (e.g. smartphone or tablet).
Android
iOS
ENG - 22
SmartThings app
3. Launch the app, and then follow the instructions on the screen to register (add) your Soundbar in
the app.
•• The automatic pop-up (the third illustration below) may not be available on some mobile
devices.
If this is the case, select and complete “Add device” from the app menu . Your Soundbar is now
added to the app.
Launch App
Auto pop-up
Add speakers
NOTE
•• To connect an additional SWA-8500S wireless rear speaker kit (not supplied), disconnect the
Samsung wireless speakers from the Soundbar to disable the surround sound system. (If you
connect the surround speakers without disconnecting the SWA-8500S speakers, sound is played
via both the Samsung wireless speaker and the Surround speaker.)
ENG - 23
07 CONNECTING AN AMAZON PRODUCT
•• This feature may not be available in some countries.
•• This service is provided by Amazon and can be terminated at any time. Samsung does not assume
responsibility for service availability.
•• Amazon Alexa app screen is subject to change without prior notice.
Connect and use with an Amazon product (Amazon Echo)
Use an Amazon Echo product to control your Soundbar and enjoy music services provided by Amazon Echo.
NOTE
•• Confirm that the Soundbar is connected to Wi-Fi. (Refer to “Connecting via Wi-Fi (Wireless
Network)”)
1. In the SmartThings app, change your Soundbar’s name to one that can be recognized by your
Amazon device.
(Example: Samsung, Soundbar, Living Room, Family Room, Bedroom, Office, etc.)
CAUTION
•• Amazon devices may not recognize names that contain elements such as special characters.
Select Edit
Select speakers
ENG - 24
Change name
Save
2. In the Alexa app, search “Samsung Wireless Audio” in Skills, and then select “ENABLE”.
•• Skip this step if you have Skills set up already.
Amazon Alexa app
Select Skills
Search
ENG - 25
Enable
Use voice commands to control the Soundbar
•• The Amazon Echo service you can use with your Soundbar is limited to music. Other services
provided by Amazon Echo, such as news and weather, can only be accessed through your
Amazon Echo product.
Trigger + Command + Speaker name
Use the Speaker name you changed in the SmartThings app. (Refer to “Connect and use
with an Amazon product (Amazon Echo)”)
Action
Voice Command
To search an audio device added to the
SmartThings account connected to the
"Alexa Discover devices"
Amazon Alexa account
* To use voice commands for the Soundbar named “Living room”
Action
Voice Command
To set the volume level to 5
"Alexa Set the volume to 5 on Living room"
To increase the volume level
"Alexa Volume up on Living room"
To mute the sound
"Alexa Mute on Living room"
To listen to a radio station named KISS FM
"Alexa Play Kiss FM on Living room"
To play the next song
"Alexa Next song on Living room"
To stop the audio
"Alexa Stop on Living room"
To turn the audio on
"Alexa Turn on Living room"
To turn the audio off
"Alexa Turn off Living room"
To change the input source
"Alexa Switch to Bluetooth on Living room"
ENG - 26
08 USING THE REMOTE CONTROL
How to Use the Remote Control
Turns the Soundbar on and off.
Power
PAIR
Press to select a source connected to the
Soundbar.
Source
Mute
VOL
WOOFER
SOUND
MODE
PAIR
SOUND
MODE
You can select the desired sound mode by
choosing STANDARD, SURROUND, GAME PRO,
or ADAPTIVE SOUND.
SOUND MODE Select the “STANDARD” mode if you want to
enjoy the original sound.
•• GAME PRO mode
PAIR
PAIR yourself in the scene with a
Immerse
dedicated
VOL
WOOFER setting that optimizes sounds
SOUND
specifically for gaming.
WOOFER
SOUND
MODEVOL
MODE
•• ADAPTIVE SOUND mode
Automatically analyzes content and gives
you optimized sound and automatically
enhances voice clarity on low volumes.
SOUND
MODE
Press the
(Mute) button to mute the sound.
Press it again
PAIR to unmute the sound.
SOUNDBAR
PAIR
VOL
WOOFER
VOL
Bluetooth
SOUND
MODE
VOL
PAIR
WOOFER
ENG - 27
Press the PAIR button. “BT PAIRING” appears
in the Soundbar’s display.
You can connect the Soundbar to a new
WOOFER
Bluetooth device in this mode by selecting the
Soundbar from the Bluetooth device's search
list.
Press the p button to pause a music file temporarily.
When you press the button again, the music file plays.
Play / Pause
(BT/Wi-Fi)
PAIR
Press the indicated areas to select Up/Down/Left/Right.
SOUND
MODE
Up/Down/
PAIR
Left/Right
SOUND
MODE
VOL
VOL
WOOFER
WOOFER
Press Up/Down/Left/Right on the button to select or set functions.
•• Music Skip
Press the Right button to select the next music file. Press the Left button to select the
previous music file.
•• Anynet+ / Auto Power Link
You can turn Anynet+ and Auto Power Link on or off.
Anynet+ and Auto Power Link are turned on and turned off by the Right and Left
buttons respectively.
–– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable,
you can control your Soundbar with a Samsung TV remote control.
Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.
–– Auto Power Link : If the Soundbar is connected to your TV through a digital optical
cable, the Soundbar can automatically turn on when you turn on your TV. Press
and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.
–– Anynet+ / Auto Power Link are set to ON by default.
•• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to an
accessary item).
ENG - 28
You can select TREBLE, BASS, SYNC, CENTER LEVEL, SIDE LEVEL, FRONT TOP LEVEL,
REAR LEVEL, and VIRTUAL ON/OFF.
–– To control the volume of the treble or bass sound, select TREBLE or BASS in Sound
Sound Control
Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons.
–– Press and hold the
(Sound Control) button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the Left/Right buttons and each can be adjusted to a setting
between -6 to +6 using the Up/Down buttons.
–– To control the volume of the each speaker select CENTER LEVEL, SIDE LEVEL or
FRONT TOP LEVEL in Sound Settings, and then adjust the volume between -6~+6 by
using the Up/Down buttons.
–– If the video on the TV and audio from the Soundbar are not synchronised, select SYNC
in Sound Control, and then set the audio delay between 0~300 milliseconds by using
the Up/Down buttons.
–– If Surround Speakers are connected, select REAR LEVEL and then use the Up/Down
PAIR
buttons to adjust the volume within a -6 to +6 range. The VIRTUAL Speaker function
PAIR
can be turned ON/OFF by using the Up/Down buttons.
–– SYNC is only supported for some functions.
SOUND
MODE
•• Initialise
SOUND
MODE
With the Soundbar turned off, press and hold the
(Sound Control) button for more
than 5 seconds until the speaker turns on. “INIT” appears on the display and the
Soundbar is initialised.
R
FE
FE
W
OO
W
OO
SO
U
N
VO
L
D
BA
R
BA
R
D
SO
VO
L
D
N
U
WOOFER
SO
O
U
N
VO
L
D
BA
R
BA
R
W
OO
SOUND
VOLMODE
N
OO
FE
FE
R
R
SO
M UN
OD D
E
SO
M UN
OD D
E
SO
M UN
OD D
E
PAIR
WOOFER
WOOFER
R
VOL
U
Push the button up or down to adjust the volume of the subwoofer to -12 or between -6 to
+6. To set the subwoofer volume level to 0, press the button.
W
OO
FE
BA
R
D
N
U
SO
VO
L
N
D
U
SO
SO
U
N
VO
L
D
BA
R
BA
R
W
OO
W
OO
F
FE
ER
R
SO
M UN
OD D
E
SO
M UN
OD D
E
SO
M UN
OD D
E
R
WOOFER
VO
L
VOL
VOL
SO
M UN
OD D
E
Push the button up or down to adjust the volume.
•• Mute
Press the VOL button to mute the sound. Press it again to unmute the sound.
ENG - 29
Adjusting the Soundbar volume
with a TV remote control
4. If you want to return the Soundbar to the
If you have a Samsung TV, you can adjust
the Soundbar’s volume using the IR remote
control that came with your Samsung TV.
button for 5 seconds repeatedly until
default mode (control by a Samsung TV
remote), push up and hold the WOOFER
“SAMSUNG-TV REMOTE” appears in the
display.
First use the TV menu to set the TV audio on your
Samsung TV to external speakers, then use your
SAMSUNG-TV REMOTE
D
N
U
VO
L
BA
R
W
OO
(Default mode)
SO
volume. For more information, see the TV’s user
FE
R
SO
M UN
OD D
E
Samsung remote to control the Soundbar’s
5 Sec
manual. The default mode for this function is
control by a Samsung TV remote. If your TV is not
–– Each time you push the WOOFER button
a Samsung TV, follow the directions below to
up and hold it for 5 seconds, the mode
change the settings of this function.
switches in the following order:
“SAMSUNG-TV REMOTE” (Default mode)
1. Turn Off the Soundbar.
→ “OFF‑TV REMOTE” →
“ALL‑TV REMOTE”.
BYE
–– This function may not be available,
depending on the remote control.
–– Manufacturers supporting this function:
2. If you do not want to use this function, push
up and hold the WOOFER button for
REMOTE” appears in the display.
N
D
U
SO
VO
L
BA
R
W
OO
FE
R
SO
M UN
OD D
E
OFF-TV REMOTE
3. If you want to control the Soundbar with
your TV’s remote, push up and hold the
WOOFER button for 5 seconds repeatedly
until “ALL-TV REMOTE” appears in the
display. Then, use your TV’s menu to select
external speakers.
ALL-TV REMOTE
D
U
N
SO
VO
L
BA
R
W
OO
FE
R
SO
M UN
OD D
E
5 Sec
PANASONIC, TOSHIBA, GRUNDIG,
Hisense, RCA
5 seconds repeatedly until “OFF-TV
5 Sec
VIZIO, LG, Sony, Sharp, PHILIPS,
ENG - 30
Using the Hidden Buttons (Buttons with more than one function)
Hidden Button
Reference page
Remote Control Button
Function
WOOFER
TV remote control On/Off (Standby)
page 30
Left
Auto Power Link ON/OFF
page 28
Right
Anynet+ ON/OFF
page 28
Up
ID SET
page 28
7 Band EQ
page 29
Initialise (Standby)
page 29
(Sound Control)
Output specifications for the different sound effect modes
Output
Effect
STANDARD
SURROUND
GAME PRO
ADAPTIVE SOUND
Input
With Subwoofer Only
With Subwoofer & Wireless
Rear Speaker Kit
2.0 ch
2.1 ch
2.1 ch
5.1 ch
3.1 ch
5.1 ch
2.0 ch
3.1.2 ch
5.1.2 ch
5.1 ch
3.1.2 ch
5.1.2 ch
2.0 ch
3.1.2 ch
5.1.2 ch
5.1 ch
3.1.2 ch
5.1.2 ch
2.0 ch
3.1.2 ch
5.1.2 ch
5.1 ch
3.1.2 ch
5.1.2 ch
•• If the input source is Dolby Atmos®, 3.1.2 channels are outputted. The sound effect modes
controlled by the SOUND MODE button and listed above are not available.
•• The Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit, contact the
vendor you purchased the Soundbar from.
ENG - 31
09 INSTALLING THE
WALL MOUNT
Wallmount Components
Wall Mount Guide
Installation Precautions
x2
•• Install on a vertical wall only.
•• Do not install in a place with high
x2
Holder-Screw
temperature or humidity.
•• Verify whether the wall is strong enough to
Screw
x2
support the product’s weight. If not, reinforce
the wall or choose another installation point.
•• Purchase and use the fixing screws or
Bracket-Wall Mount
anchors appropriate for the kind of wall you
have (plaster board, iron board, wood, etc.). If
1. Place the Wall Mount Guide against the wall
possible, fix the support screws into wall
surface.
studs.
•• Purchase wall mounting screws according to
the type and thickness of the wall you want to
•• The Wall Mount Guide must be level.
•• If your TV is mounted on the wall, install
the Soundbar at least 5 cm below the TV.
mount the Soundbar on.
–– Diameter: M5
–– Length: 35 mm or longer recommended.
•• Connect cables from the unit to external
devices before you install the Soundbar on
the wall.
5 cm or more
•• Make sure the unit is turned off and
unplugged before you install it. Otherwise, it
may cause an electric shock.
ENG - 32
2. Align the Wall Mount Guide’s Centre Line
5. Push a screw (not supplied) through each
with the centre of your TV (if you are
Holder-Screw, and then screw each screw
mounting the Soundbar below your TV), and
firmly into a support screw hole.
then fix the Wall Mount Guide to the wall
using tape.
•• If you are not mounting below a TV, place
the Centre Line in the centre of the
installation area.
6. Install the 2 Bracket-Wall Mounts in the
correct orientation on the bottom of the
Soundbar using 2 Screws.
Centre Line
3. Push a pen tip or sharpened pencil tip
through the centre of the A-TYPE images on
each end of the Guide to mark the holes for
the supporting screws, and then remove the
Wall Mount Guide.
•• Remove the Holder-Feet and
Holder-Supports if they are attached.
•• When assembling, make sure the hanger
part of the Bracket-Wall Mounts are
4. Using an appropriately sized drill bit, drill a
located behind the rear of the Soundbar.
hole in the wall at each marking.
•• If the markings do not correspond to the
Rear of Soundbar
positions of studs, make sure you insert
appropriate anchors or mollies into the
holes before you insert the support
screws. If you use anchors or mollies,
make sure the holes you drill are large
enough for the anchors or mollies you
use.
Right end of Soundbar
ENG - 33
7. Install the Soundbar with the attached
Bracket-Wall Mounts by hanging the
Bracket-Wall Mounts on the Holder-Screws
on the wall.
10 INSTALLING THE
HOLDER-FEET
Holder-Feet Components
x2
x2
Holder-Foot
8. Slide the Soundbar down as shown below so
Holder-Support
that the Bracket-Wall Mounts rest securely
x2
on the Holder-Screws.
•• Insert the Holder-Screws into the wide
(bottom) part of the Bracket-Wall
Screw
Mounts, and then slide the Bracket-Wall
Mounts down so that the Bracket-Wall
•• The Holder-Feet raise the Soundbar so you
Mounts rest securely on the
can install the Soundbar in front of your TV
Holder-Screws.
and above the legs of the TV’s stand. See the
illustration below.
•• You can set the Holder-Feet to one of three
different heights.
•• Using the Holder-Feet, you can adjust the
distance between the Soundbar and your TV
to fit your TV stand’s shape.
TV
ENG - 34
Raising the Soundbar 15 mm
1. Use the 2 supplied Screws to fix the two
Holder-Feet to the wall mount assembly on
the bottom panel of the Soundbar.
11 SOFTWARE
UPDATE
When the Soundbar is connected to the Internet,
software updates automatically occur even when
the Soundbar is turned off.
•• To use the Auto Update function, the
Soundbar must be connected to the Internet.
The Wi-Fi connection to the Soundbar will be
terminated if the Soundbar’s power cord is
disconnected or the power is cut off. If the
power is cut off, when the power comes back
on or you reconnect the power cord, turn on
Raising the Soundbar 20 mm
the Soundbar, and then reconnect it to the
1. Attach the two Holder-Feet to the two
Internet.
Holder-Supports, as shown in the figure
below.
2. Use the 2 supplied Screws to fix the two
Holder-Feet to the Wall Mount assembly on
the bottom panel of the Soundbar.
ENG - 35
12 TROUBLESHOOTING
Before seeking assistance, check the following.
The red LED on the subwoofer blinks and
the subwoofer is not producing sound.
The unit will not turn on.
Is the power cord plugged into the outlet?
This issue can occur if the subwoofer is not
;; Connect the power plug to the outlet.
connected to the Soundbar main unit.
A function does not work when the button
is pressed.
;; Try to connect your subwoofer again.
Is there static electricity in the air?
The subwoofer drones and vibrates
noticeably.
;; Disconnect the power plug and connect it
again.
(See page 6.)
Try to adjust the vibration of your subwoofer.
;; Push the WOOFER button on your remote
Sound dropouts occur in BT mode.
control up or down to adjust the subwoofer
;; See the Bluetooth connection sections on
volume. (to -12, or between -6 ~ +6).
pages 12 and 19.
Cannot connect to the TV.
Sound is not produced.
If connected via a wired network
;; Check if the cable is connected correctly.
Is the Mute function on?
;; Press the
–– Check the port name to make sure
(Mute) button to cancel the
that the cable is connected to the
mute function.
correct port. For instructions, see the
Is the volume set to minimum?
page explaining each connection
;; Adjust the Volume.
method.
The remote control does not work.
;; Press the
Are the batteries drained?
remote control to check if the mode is
;; Replace with new batteries.
correct.
Is the distance between the remote control and
Soundbar main unit too far?
;; Move the remote control closer to the
(Source) button on the right
side panel of the Soundbar or on the
If connected via a wireless network
;; Connected via Bluetooth
1. Switch the Soundbar to “BT PAIRING”
Soundbar main unit.
mode, and then use the TV to search
again. (See page 12 for details.)
ENG - 36
13 LICENCE
;; Connected via Wi-Fi
1. Check if the TV is a compatible model.
•• Only Samsung Smart TVs released
after 2013 are supported.
2. Check if the TV is connected to Wi-Fi.
•• If the TV is not connected to Wi-Fi, use
the network menu on the TV to
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Atmos, Dolby Audio,
establish a connection. (See the TV
Dolby Digital Plus, Pro Logic, and the double-D
user manual.)
symbol are trademarks of Dolby Laboratories.
3. Check if the Soundbar is connected to
Wi-Fi.
•• When the Soundbar is connected, you
can find it in the list of speakers on
For DTS patents, see http://patents.dts.com.
your mobile device when you run the
Manufactured under license from DTS
SmartThings app. See page 22 for
details.
4. Check for a DFS channel.
•• If your wireless router (Wi-Fi) is using a
DFS channel, you cannot establish a
Wi-Fi connection between the TV and
Soundbar. Contact your Internet
service provider for details.
Licensing Limited. DTS, the Symbol, & DTS and
the Symbol together, DTS:X, and the DTS:X logo
are registered trademarks and/or trademarks
of DTS, Inc. in the United States and/or other
countries. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
•• The Spotify Software is subject to third
party licences found here :
www.spotify.com/connect/third-partylicenses.
•• For more information about Spotify
Connect, please visit
www.spotify.com/connect
ENG - 37
14 OPEN SOURCE
LICENCE NOTICE
For further information on Open Sources used in
this product, please visit the website:
http://opensource.samsung.com
15 IMPORTANT
NOTES ABOUT
SERVICE
•• Figures and illustrations in this User Manual
are provided for reference only and may differ
from actual product appearance.
•• An administration fee may be charged if
either
(a) a
n engineer is called out at your request
and there is no defect with the product (i.e.
where the user manual has not been read).
(b) you bring the unit to a repair centre and
there is no defect with the product (i.e.
where the user manual has not been read).
•• You will be informed of the administration fee
amount before a technician visits.
ENG - 38
16 SPECIFICATIONS AND GUIDE
Specifications
Model Name
HW-Q70R
Weight
3.6 kg
Dimensions (W x H x D)
1100.0 x 59.0 x 100.0 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % ~ 75 %
AMPLIFIER
Rated Output power
Supported play formats
30W x 5 + 10W x 2, 6ohm x 4 + 4ohm x 3
LPCM 8ch, Dolby Digital,
Dolby Atmos (True HD / Digital Plus), DTS:X
WIRELESS DEVICE OUTPUT POWER
100mW at 2.4GHz – 2.4835GHz,
Wi-Fi max transmitter power
5.15GHz – 5.35GHz & 5.47GHz – 5.725GHz
WIRELESS DEVICE OUTPUT POWER
BT max transmitter power
100mW at 2.4GHz – 2.4835GHz
WIRELESS DEVICE OUTPUT POWER
SRD max transmitter power
25mW at 5.725GHz – 5.825GHz
Subwoofer Name
PS-WR75B
Weight
9.8 kg
Dimensions (W x H x D)
205.0 x 403.0 x 403.0 mm
AMPLIFIER
Rated Output power
160W
WIRELESS DEVICE OUTPUT POWER
SRD max transmitter power
25mW at 5.725GHz – 5.825GHz
NOTES
•• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
•• Weight and dimensions are approximate.
ENG - 39
Precaution : The Soundbar will restart automatically if you turn on/turn off Wi-Fi.
Overall Standby Power
4.2W
Consumption (W)
Wi-Fi
Port deactivation method
Bluetooth
Press at the centre of the WOOFER (or BASS) button on the remote
control for 30 seconds or longer to turn the Wi-Fi On / Off.
Press the NETWORK button on the bottom panel of the Soundbar
Port deactivation method
for 30 seconds to turn Bluetooth On / Off.
•• Hereby, Samsung Electronics, declares that this equipment is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://www.samsung.com go to Support > Search Product
Support and enter the model name.
This equipment may be operated in all EU countries.
The 5GHz WLAN(Wi-Fi or SRD) function of this equipment may only be operated
indoors.
ENG - 40
[Correct disposal of batteries in this product]
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
For information on Samsung’s environmental commitments and product specific regulatory obligations
e.g. REACH, WEEE, Batteries, visit:
http://www.samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
ENG - 41
UNITED
UNITED
KINGDOM
KINGDOM
UNITED
KINGDOM
EIRE
EIREEIRE
beyondthe
thecontrol
controlof
ofSamsung.
Samsung.
his
s Samsung
Samsung
product
product
isiswarranted
warranted
for
the
theperiod
period
twelve
twelve
(12)
(12)
months(12)
from
frommonths
the
theorigiorigibeyond
the
control of S
This
Samsung
product isfor
warranted
forofofthe
period
ofmonths
twelve
from the origi-beyond
aldate
dateofofpurchase,
purchase,
against
against
defective
defective
materials
materials
and
andworkmanship.
workmanship.InInthe
theevent
eventthat
that
6.6.
This
Thiswarranty
warranty
isisvalid
validfor
forany
anyperson
personw
nal date
of
purchase,
against
defective
the event
that
6. This
This
Samsung
product is
warranted
for thematerials
period ofand workmanship.
4. This In
product
is not
considered
to bewarranty
defectiveis valid for a
arranty
rranty service
service
isisrequired,
required,
you
should
shouldreturn
return
the
theproduct
product
tothe
the
retailer
retailer
from
whom
whomitfrom
it
possession
possession
ofofthe
theproduct
product
during
during
the
the
warranty
service you
is
required,
you
should
return to
the
product
tofrom
the retailer
whom
it
possession
of the
product
twelve
(12) months
from the
original date
of purchase,
in materials
nor7.
workmanship
by reason
that
itstatutory
as
s purchased.
purchased.
However,
Samsung
Samsung
Authorised
Authorised
Dealers
Dealers
and
andDealers
Authorised
Authorised
Service
Centres
Centres
7.The
Theconsumers
consumers
statutory
statutory
rights
rights
ininany
anyria
wasHowever,
purchased.
However,
Samsung
Authorised
andService
Authorised
Service
Centres
7. The
consumers
other
otherEC
ECCountries
Countries
will
will
comply
comply
with
withand
the
thewarranty
warranty
on
onwarranty
the
the
termson
issued
issued
totopurchasers
purchasers
inpurchasers
in
the
the
retailer
arising
from
from
the
thepurchase
purchase
c
in
otherdefective
EC
Countries
will
comply
with the
the terms
issued to
in
the
retailer
from the
against
materials
workmanship.
In terms
the
requires
adaptation
inretailer
order
toarising
conform
toarising
ecountry
countryconcerned.
concerned.
Incase
caseofofdifficulty,
difficulty,
details
ofofour
our
Authorised
Authorised
Service
Centres
Centres
are
areCentres
warranty.
warranty.
Unless
Unless
there
there
isisnational
national
legi
the
countryIn
concerned.
In casedetails
of
difficulty,
details
of ourService
Authorised
Service
are
warranty.
Unless
therelegis
is n
event
that
warranty
service
is
required,
you
should
return
national
or
local
technical
or
safety
standards
ailable
ailablefrom:
from:
warranty
warrantyare
are
the
theconsumers
consumers
solerights
right
available from:
warranty
are thesole
consumer
the product to the retailer from whom it was purchased.
in force in any Country
other
than
one
for
tors
torsshall
shallnot
not
be
bethe
liable
liable
for
for
indirect
indirect
co
tors
shall
not
be
liableoror
forcon
in
Samsung
Samsung
Electronics
Electronics
U.K.
U.K.Ltd.
Ltd.Dealers
Customer
Customer
Care
CareCentrePO
CentrePO
Boxwhich
479
479 the
compact
discs,
discs,
videos
videos
ororand
audio
audio
taper
taper
Samsung
Electronics
U.K. and
Ltd.Authorised
Customer
CareBox
CentrePO
Box
479 compact
compact
discs,
videos
or or
ao
However,
Samsung Authorised
product
was
originally
designed
GATESHEAD
GATESHEAD
NE9
NE99BJ
9BJUnited
United
Kingdom
Kingdom
GATESHEAD
NE9 9BJ
United Kingdom
Service Centres in other EC Countries will comply with
the warrantyUnited
on the terms
issued Kingdom
to purchasers in the
United
Kingdom
Kingdom
United
Tel
Tel: :0330
0330
SAMSUNG
SAMSUNG
(7267864)
(7267864)
Tel
0330 SAMSUNG
(7267864)
country concerned.
In case
of:difficulty,
details of our
Fax:
Fax:03307260001
03307260001
Fax: 03307260001
Authorised Service
Centres
are
available
from:
www.samsung.com
www.samsung.com
5.
www.samsung.com
anufactured. This warranty willSAMSUNG
not cover, and
no ELECT
SAMSUNG
ELEC
SAMSUNG
re-imbursement will be made for such adaptation
nor any damage which may result.
This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or
Eire
Eire Electronics
Eire U.K. Ltd
Samsung
replacement of parts due to normal wear and
Tel
Tel: :0818
0818717100
717100
Tel :Support
0818 717100
Samsung Customer
Centre
Fax:
Fax:+44
+44117
117
915
915
6736
6736
Fax:
+44
117 915 6736
tear.
Selectapost
38,www.samsung.com
Sheffield, S97 3FJ
www.samsung.com
www.samsung.com
b) Cost relating to transport, removal or
United Kingdom
installation of the product.
WARRANTY
WARRANTY
CONDITIONS
CONDITIONS
■WARRANTY
CONDITIONS
The
Thewarranty
warranty
isisonly
only
valid
valid
if,
if,
when
when
warranty
warranty
service
service
is
is
required,
required,
the
the
warranty
warranty
card
card
isisfully
fully
1. The
warranty
is
only
valid
if,
when
warranty
service
is
required,
the
warranty
card is fully
c)
Misuse,
including
the failure to use this
United Kingdom
and
andproperly
properlyand
completed
completed
and
isispresented
presented
with
with
the
theoriginal
original
invoice
ororsales
sales
slip
slipororconfirconfir-slip or confirproperlyand
completed
and is
presented
withinvoice
the original
invoice
sales
product
for its normal purposes or incorrect
Tel
:
0330
SAMSUNG
(7267864)
mation,
mation,and
andthe
theserial
serial
number
number
on
onthe
the
product
product
hasnot
notbeen
been
defaced.
defaced.
mation,
and
the serial
number
onhas
the
product
has
not been defaced.
installation.
Samsung’s
Samsung’s
obligations
are
arelimited
limitedtoto
the
the
repair
repairto
or,
or,
atatrepair
its
itsdiscretion,
discretion,
replacement
ofof
2. obligations
Samsung’s
obligations
are
limited
the
or, at itsreplacement
discretion,
replacement
of
www.samsung.com/uk/support
the
theproduct
productor
orthe
the
defective
defective
part.
part.
the
product
or the
defective part.
d) Damage caused by Lightning, Water, Fire,
Warranty
Warranty3.
repairs
repairs
must
must
be
becarried
carried
out
byAuthorised
Authorised
SamsungDealers
Dealers
oror Dealers or
Warranty
repairs
mustout
be by
carried
out by Samsung
Authorised
Samsung
EIRE
Acts
of God, War, Public Disturbances,
Authorised
AuthorisedService
ServiceCentres.
Centres.
No
No
re-imbursement
re-imbursement
will
willbe
bemade
made
for
for
repairs
repairs
carried
Authorised
Service
Centres.
No re-imbursement
will
be
madecarried
for repairs carried
Tel
:
0818
717100
incorrect
mains
voltage, improper
out
outby
bynon
nonSamsung
Samsung
Dealers
and,
and,
any
anysuch
such
repair
repair
work
workrepair
and
anddamage
damage
totothe
theprodprod-to
out
by nonDealers
Samsung
Dealers
and,
any such
work and
damage
the products
uctscaused
caused
by
bysuch
such
repair
repair
work
workrepair
will
willnot
not
be
becovered
covered
by
bythis
thiswarranty.
warranty.
ucts
caused
by such
work
will not be
covered
by this warranty.
www.samsung.com/ie/support
ventilation or any other cause beyond the
This
Thisproduct
product
isisnot
not
considered
considered
tobe
bedefective
defective
ininmaterials
materialsnor
workmanship
workmanship
by
by
4. This
product
is notto
considered
to be
defective
innor
materials
nor workmanship
by
control
Samsung.
reason
reasonthat
thatitreason
itrequires
requires
adaptation
order
ordertotoconform
conform
national
local
technical
technical
thatadaptation
it requiresinin
adaptation
in ordertotonational
conformoror
tolocal
national
or localoftechnical
@standards
WARRANTY
CONDITIONS
ororsafety
safetystandards
force
force
ininany
any
Country
Country
other
other
than
thanthe
the
one
one
for
forwhich
which
the
the
product
product
or safetyininstandards
in force
in any
Country
other
than
the
for
which theisproduct
6.one
This
warranty
valid for any person who
was
wasoriginally
originally
designed
designed
and
and
manufactured.
manufactured.
This
Thiswarranty
warranty
will
willwarranty
not
notcover,
cover,
and
and
no
rere- and no reoriginally
designed
and manufactured.
This
will
notno
cover,
1.was
The
warranty
is only valid
if, when warranty
legally
acquired
possession of the product
mbursement
imbursement
will
willbe
bemade
made
for
forbe
such
such
adaptation
adaptation
nor
any
anydamage
damage
which
which
may
may
result.
result.
imbursement
will
made
for suchnor
adaptation
nor any
damage
which
may result.
service
isnone
required,
warranty
card is fully
This
Thiswarranty
warranty
covers
covers
none
ofofthe
thethe
following:
following:
during the warranty period.
5. This
warranty
covers
none
of the following:
a)a)Periodic
Periodiccheck
check
ups,
ups,maintenance
maintenance
and
and
repair
oror
replacement
replacement
ofofparts
partsdue
dueoftotoparts due to
a)
Periodic
check
ups, maintenance
and
repair
and
properly
completed
andrepair
is presented
with or replacement
7. The consumers statutory rights in any
normal
normalwear
wear
and
andtear.
tear.
normal
wear and tear.
the
original
invoice
or
sales
slip
or
confirmation,
b)b)Cost
Costrelating
relating
tototransport,
transport,
removal
removal
ororinstallation
installation
the
theproduct.
product.
b) Cost
relating to
transport,
removal orofof
installation
of the product.
applicable national legislation whether against
the
serial
number
on
the
has
not for its normal
c)c)Misuse,
Misuse,including
including
the
the
faiure
faiure
totothe
use
usefaiure
this
this
product
product
forits
its
normal
normal
c) and
Misuse,
including
toproduct
use for
this
product
the retailer arising from the purchase contract
purposes
purposesororbeen
incorrect
incorrect
installation.
installation.
purposes
or
incorrect installation.
defaced.
otherwise
d)d)Damage
Damagecaused
caused
by
by
Lightning,
Lightning,
Water,
Water,
Fire,
Fire,
Acts
Acts
of
of
God,
God,
War,
War,
Public
Public
d) Damage caused by Lightning, Water, Fire, Acts of God, or
War,
Public are not affected by this warranty.
2. Samsung’s
obligations
are
limited
to the
repair oror
Disturbances,
Disturbances,
incorrect
incorrect
mains
mains
voltage,
voltage,
improper
improper
ventilation
ventilation
any
anyother
other
cause
Disturbances,
incorrect
mains
voltage,
improper
ventilation
orcause
any
other
cause legislation to the
Unless
there
is national
or, at its discretion, replacement of the product
or the defective part.
3. Warranty repairs must be carried out by
Authorised Samsung Dealers or Authorised
Service Centres. No re-imbursement will be
made for repairs carried out by non Samsung
Dealers and, any such repair work and damage
to the products caused by such repair work will
not be covered by this warranty.
contrary, the rights under this warranty are the
-2-2-2consumers sole rights and Samsung, its
subsidiaries and distributors shall not be liable
for indirect or consequential loss or any
damage to records, compact discs, videos or
audio taper or any other related equipment or
material.
SAMSUNG ELECTRONICS (U.K.) LTD.
© 2019 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care Centre.
Country
Contact Centre 
Web Site
Country
Contact Centre 
` Europe
UK
0330 SAMSUNG (7267864)
IRELAND (EIRE) 0818 717100
GERMANY
06196 77 555 77
FRANCE
01 48 63 00 00
ITALIA
800-SAMSUNG (800.7267864)
SPAIN
0034902172678
PORTUGAL
808 207 267
LUXEMBURG
261 03 710
NETHERLANDS 088 90 90 100
BELGIUM
02-201-24-18
NORWAY
21629099
DENMARK
707 019 70
FINLAND
030-6227 515
SWEDEN
0771 726 786
POLAND
801-172-678* lub +48 22 607-93-33*
* (opłata według taryfy operatora)
HUNGARY
0680SAMSUNG (0680-726-7864)
AUSTRIA
0800-SAMSUNG (0800-7267864)
www.samsung.com/uk/
support
www.samsung.com/ie/
support
www.samsung.com/de/
support
www.samsung.com/fr/
support
www.samsung.com/it/
support
www.samsung.com/es/
support
www.samsung.com/pt/
support
www.samsung.com/be_
fr/support
www.samsung.com/nl/
support
www.samsung.com/be/
support (Dutch)
www.samsung.com/
be_fr/support (French)
www.samsung.com/no/
support
www.samsung.com/dk/
support
www.samsung.com/fi/
support
www.samsung.com/se/
support
http://www.samsung.com/
pl/support/
www.samsung.com/hu/
support
www.samsung.com/at/
support
SWITZERLAND 0800 726 78 64 (0800-SAMSUNG)
CZECH
800 - SAMSUNG (800-726786)
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
CROATIA
072 726 786
BOSNIA
055 233 999
MONTENEGRO 020 405 888
SLOVENIA
080 697 267 (brezplačna številka)
SERBIA
011 321 6899
ALBANIA
BULGARIA
ROMANIA
CYPRUS
GREECE
045 620 202
*3000 Цена в мрежата
0800 111 31 , Безплатна телефонна
линия
*8000 (apel in retea)
08008-726-78-64 (08008-SAMSUNG)
Apel GRATUIT
8009 4000 only from landline, toll
free
80111-SAMSUNG (80111 726 7864) only
from land line
(+30) 210 6897691 from mobile and
land line
LITHUANIA
8-800-77777
LATVIA
8000-7267
ESTONIA
800-7267
Web Site
www.samsung.com/ch/
support (German)
www.samsung.com/
ch_fr/support (French)
www.samsung.com/cz/
support
www.samsung.com/sk/
support
www.samsung.com/hr/
support
www.samsung.com/
support
www.samsung.com/si/
support
www.samsung.com/rs/
support
www.samsung.com/al/
support
www.samsung.com/bg/
support
www.samsung.com/ro/
support
www.samsung.com/gr/
support
www.samsung.com/lt/
support
www.samsung.com/lv/
support
www.samsung.com/ee/
support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising