Westinghouse | WFE647SA | Westinghouse WFE647SA User Manual

Westinghouse WFE647SA User Manual
USER MANUAL
540MM AND 600MM
SLOT-IN UPRIGHT RANGE COOKER
WFE517, WFE547, WFE616, WFE619
WFE642, WFE647, WFG617
CONGRATULATIONS
CONTENTS
Congratulations and thank you for choosing our cooker.
We are sure you will find your new appliance a pleasure
to use and a great asset to your cooking. Before you use
the appliance, we recommend that you read through the
whole user manual which provides a description of the
product and its functions.
Important safety instructions���������������������������������������������������������3
To avoid the risks that are always present when an
appliance is used, it is important that the appliance
is installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards. For
future reference, please store this booklet in a safe place.
Operating for the first time������������������������������������������������������������ 9
This appliance complies with the requirements of
Australian Standard AS/NZ 60335.2.6. Gas appliances
also comply with the requirements of AS4551.
Conditions of Use
Description of your appliance������������������������������������������������������� 4
Before operating your appliance for the first time������������� 6
Installing your oven accessories���������������������������������������������������7
Using the hotplate������������������������������������������������������������������������������ 8
Using the gas cooker�����������������������������������������������������������������������10
General hints and tips���������������������������������������������������������������������� 12
Guide to better grilling�������������������������������������������������������������������� 13
Operating the 120min mechanical timer��������������������������������14
Using the oven������������������������������������������������������������������������������������� 15
Oven guide��������������������������������������������������������������������������������������������16
Cooking��������������������������������������������������������������������������������������������������� 18
Cleaning��������������������������������������������������������������������������������������������������19
This appliance is intended to be used in household
and similar applications such as:
Solving problems������������������������������������������������������������������������������� 21
• Staff kitchen areas in shops, offices and other
working environments
600mm�������������������������������������������������������������������������������������������������� 22
• Farm houses
Testing the operation of the gas cooker������������������������������� 30
• By clients in hotels, motels and other residential
type environments
Installing the appliance
540mm���������������������������������������������������������������������������������������������������24
Warranty������������������������������������������������������������������������������������������������� 31
• Bed and breakfast type environments
TIPS &AND
INFORMATION
TIPS
INFORMATION
Record model and serial number here:
Model number:........................................................................................
Serial number:..........................................................................................
Please read the user manual carefully and store in a
handy place for later reference. The symbols you will see
in this booklet have these meanings:
WARNING
WARNING
This symbol indicates information concerning your
personal safety
WARNING
CAUTION
This symbol indicates information on how to avoid
damaging the appliance
TIPS &AND
INFORMATION
TIPS
INFORMATION
This symbol indicates tips and information about use of
the appliance
ENVIRONMENT
ENVIRONMENTAL
TIPS
This symbol indicates tips and information about
economical and ecological use of the appliance
2
CONTENTS
Important – CHECK FOR ANY DAMAGE OR MARKS
If you find the appliance is damaged or marked, you must
report it within 7 days if you wish to claim for damage/
marks under the manufacturer’s warranty. This does not
affect your statutory rights.
ENVIRONMENT
ENVIRONMENTAL
TIPS
Information on disposal for users
• Most of the packing materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
• If you wish to discard this product, please contact
your local authorities and ask for the correct method
of disposal.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
WARNING
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
•
Children should be supervised to ensure that they do
not play with the appliance.
•During use, this appliance becomes hot. Care should
be taken to avoid touching hot surfaces, e.g. oven door,
heating elements or internal surfaces of the oven.
•This appliance must not be used as a space heater.
•Do not place thick portions of food under the grill.
Foods may curl, catch and ignite.
•Accessible parts may become hot when grill is in use.
Children should be kept away.
Oven
•During use the appliance becomes hot. Care should
be taken to avoid touching the hot surfaces inside
the oven.
•Switch the appliance off before removing the oven
light glass for globe replacement.
•In order to avoid a fire, the appliance must be kept
clean and vents kept unobstructed.
•To avoid an accident, ensure that oven shelves and
fittings are always inserted into the appliance in
accordance with the instructions.
•Do not spray aerosols in the vicinity of the appliance
during operation.
•
Do not use the door as a shelf.
•
Do not push down on the open oven door.
•Do not use or store flammable materials in or under
the appliance, e.g. Aerosols.
•Accessible parts will become hot when in use. To
avoid burns and scalds children should be kept away.
•Do not line the bottom of the oven or grill with foil
or cookware.
•Always use gloves when handling hot items inside
grill or oven.
•Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering
of the glass.
•Do not modify this appliance.
•The appliance is not intended to be operated by
means of an external timer or separate remote
control system.
Installation, cleaning and servicing
•An authorised person must install this appliance.
(Certificate of Compliance to be retained)
•Before using the appliance, ensure that all packing
materials are removed from the appliance.
•In order to avoid any potential hazard, the enclosed
installation instructions must be followed.
•Ensure that all specified appliance vents, openings
and airspaces are not blocked.
•Where the appliance is built into a cabinet, the
cabinet material must be capable of withstanding
85°C.
•Only authorised personnel should carry out servicing.
(Certificate of Compliance to be retained)
•Do not store items on the cooking surfaces. This may
result in a fire.
•Always ensure the appliance is switched off before
cleaning or replacing parts.
•Accessible parts may become hot during use. Young
children should be kept away.
•Do not use steam cleaners, as this may cause
moisture build up.
•The cooking process has to be supervised. A
short term cooking process has to be supervised
continuously.
•Always clean the appliance immediately after any
food spillage.
•Unattended cooking on a hob with fat or oil can be
dangerous and may result in a fire.
•The appliance must not be installed behind a
decorative door in order to avoid overheating.
Grill
•Always turn the grill off immediately after use as fat
left there may catch fire.
•Always keep the grill dish clean as any fat left
may catch fire.
•
•To maintain safe operation, it is recommended that
the product be inspected every five years by an
authorised service person.
•If rigid gas pipe is used for installation it should
include sufficient loops to allow the appliance to be
removed from installed position without the need to
disconnect the piping.
•This appliance must be earthed
•For appliances supplied with a supply cord, if the
supply cord is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
Do not leave the grill on unattended.
•To avoid a fire, ensure that grill trays and fittings are
always inserted into the appliance in accordance
with the instructions.
IMPORTANT SAFETY INSTRUCTIONS
3
DESCRIPTION OF YOUR
APPLIANCE
Grill indicator Oven indicator
lamp
lamp
Model WFE517
Hotplate
controls
Grill
temperature
selector
Oven
temperature
selector
Grill indicator Oven indicator
lamp
lamp
Model WFE547
Dual ring
hotplate
control
Hotplate
controls
Grill
temperature
selector
Oven
temperature
selector
Model WFE616
Hotplate
controls
Model WFE619
Hotplate
controls
4
DESCRIPTION
2 hour
timer
2 hour
timer
Grill/Oven
indicator lamp
Grill/Oven
selector
Grill/Oven
temperature
selector
Grill indicator
lamp
Grill
Oven
temperature temperature
selector
selector
2 hour
timer
Oven indicator
lamp
2 hour
timer
Grill/Oven
indicator lamp
Model WFE642
Dual ring
hotplate
control
Hotplate
controls
Grill/Oven
selector
Grill/Oven
temperature
selector
2 hour
timer
Grill indicator Oven indicator
lamp
lamp
Model WFE647
Dual ring
hotplate
control
Hotplate
controls
Grill
temperature
selector
Oven
temperature
selector
2 hour
timer
Model WFG617
Oven fan
button
Oven
light button
Hotplate
controls
Grill
temperature 2 hour
selector
timer
Hotplate
controls
Oven
temperature
selector
Ignition
button
DESCRIPTION
5
BEFORE OPERATING YOUR APPLIANCE
FOR THE FIRST TIME
Preparing your appliance for the first time
Grill in oven
•Please remove all internal boxes and bags from the
oven before operation.
(refer to Fitting Oven Shelves)
The grill dish with wire insert can be used in any of the
two upper height positions (shelf positions 4 and 5)
between the runners.
•Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the oven
is completely dry.
NOTE: You must remove the grill dish when baking in
the oven.
WARNING
CAUTION
•Do not line the oven with foil as it will damage
the enamel.
•New appliances can have an odour during first use. It
is recommended to ‘run in’ the oven before cooking
for the first time Operate the oven(s), empty, at a
temperature of 180°C for approximately 30 minutes.
For appliances with a separate grill, run the grill on
maximum for 15 minutes WITH GRILL DOOR OPEN
Please ensure that the room is well ventilated during
this process.
Grill dish
insertion
Grill dish
final position
Oven shelf location
Installing your oven accessories
Fitting oven shelves
1.Ensure shelf orientation is correct (refer to diagram
below).
2.Slide oven shelves onto oven supports (side runners)
at an angle until raised back of shelf is past the stop
on oven supports (side runners).
Not a shelf
position
5
4
3
3.Lower front of shelf and push in until stop is reached.
2
4.To remove oven shelves, withdraw to the stop and
raise the front of shelf to clear the stop.
1
5 shelf
positions
NOTE: The top ledge is not a shelf position. There are no
stops for shelf withdrawal.
Separate grill
•To insert the grill tray in a separate grill underbench
product, open the grill door and fully extend the grill
drawer Position the grill tray so that the slots on the outer
edges fit over the tabs on the slides.
Note the orientation
of the side and rear
features
Rear slot
Slide tab
6
BEFORE OPERATING
INSTALLING YOUR OVEN
ACCESSORIES
Burner crowns and caps
Trivets
•The burner crown must be fitted correctly into the
burner cup or damage will occur during operation.
•Take care when placing the trivets as dropping them
may damage the hob or trivet.
•To do this, ensure that the 2 ribs on either side of the
spark plug hole are positioned into the 2 slots on the
burner cup (see diagram).
trivets
•Burner cap and burner crown must be clean and
located correctly for the burner to light.
NOTE: When the burner is correctly fitted it will sit level
on the hob.
burner cap
burner crown
burner crown
burner cup
wok burner
INSTALLING YOUR OVEN ACCESSORIES
7
USING THE HOTPLATE
Hotplate dos and dont’s
Ceramic hotplates
•
The cooktop is made from ceramic glass, a tough, durable
material that withstands heating and cooling without
breaking. It is strong enough to hold the heaviest utensils.
However, it must be remembered that as it is GLASS, it
may break. Treat it accordingly!
Do not place heat resistant mats, wire mats or aluminium foil under pots and pans.
• Do not allow pots and pans to boil dry, as damage to
both pan and hotplate may result.
•
Do not use the hotplate as extra bench space or as a
cutting board.
• Do not allow children on or near the cooktop at any
time.
Should you have any questions about the glass in your new
appliance, please contact the service centre by dialling
13 13 49.
• Do not allow large cookware to overhang the
hotplate onto the adjacent benchtop. This will cause
scorching to the benchtop surface.
• Do not use round bottom woks or similar utensils
which could lead to overheating of the hotplates and
possible damage to the cooking surface.
•
Use the stored heat in the hotplate by turning the
control to off before the final few minutes of cooking.
•
Do not slide pans across the surface of the ceramic
glass as it could result in scratching of the surface.
The heating elements are concealed under the smooth
glass surface which has a pattern to show the location
of the elements. When cooking, turn the control to the
required setting.
The ceramic cooktop glass will retain heat for a period of
time after the control is turned off. This will be indicated
by the hot surface warning light which will continue to
glow until the temperature drops below 60°C.
NOTE: If the ceramic glass is cracked switch off the
appliance to avoid the possibility of electric shock.
•Use pans with smooth, clean and dry bottoms to
avoid scratching or burning residue into the glass.
•Ensure the pan bottom is the same size as the
working element.
•We do not recommend ceramic glass pans because
they do not conduct heat well.
•
Stainless steel or enamelled saucepans are best.
•Do not use pans with copper or aluminium bottoms
because they can leave traces which are difficult to
remove from the glass.
•If buying new utensils select enamelled steel pans
with 2-3mm thick bottoms or stainless steel pans with
sandwich bottoms 4-6mm thick. The pan bottom
should be flat, or preferably, slightly concave at room
temperature so that it lies flat on the glass surface
when hot.
a flat or slightly
concave pan is
preferable for
ceramic hotplates
8
USING THE HOTPLATE
OPERATING FOR THE FIRST TIME
Choosing utensils for electric hotplates
Refer to the diagram below.
Choosing utensils for gas hotplates
Refer to the diagram below.
Good
Good
Bad
(recessed base)
Bad
(undersize)
Bad
(convex base)
Bad
(undersize)
Bad
(oversize)
Do not use utensils which are too large or too small.
Installation and service warning
Bad
(oversize)
WARNING
WARNING
Bad
(moisture on hotplate)
Bad
(no cookware)
•Only an authorised person must install and service
this appliance (Certificate of Compliance to be
retained).
•In order to avoid a hazard, the installation
instructions
MUST be followed.
•In order to avoid the appliance tipping, the anti-tilt
plate MUST be installed.
•Appliances requiring connection to 230 – 240V
MUST be earthed.
•An authorised person should inspect this appliance
every 5 years.
•This appliance must NOT be installed on a base,
box or in a closed cupboard.
•If the electrical supply cord is damaged, a qualified
person MUST replace the cord to avoid a hazard.
WARNING
WARNING
Surrounding kitchen cabinets MUST WITHSTAND 85°C.
BEFORE
OPERATING FIRST TIME
TIPS
& INFORMATION
1.
Read all the Warning and Safety information.
2.
Remove all internal boxes and bags from oven.
3.
lean out the oven interior with detergent and warm
C
water and polish with a soft cloth. DO NOT close
oven door until the oven is completely dry.
OPERATING
9
USING THE GAS COOKER
Lighting gas hotplate, grill and oven
Gas hotplate
Ensure burner caps, crowns and trivets are properly assembled.
Burner Cap
Burner Crown
Electronic ignition (For models WFE616, WFE619
and WFE517)
These hobs are fitted with mains powered electronic ignition.
When the appliance has been connected and the power is on,
depressing any knob will release sparks to all burners. To light
a burner, depress the corresponding knob and while continuing
to depress knob turn anticlockwise to ‘HI’ position. The knob
may be released once the flame is established, and turned
further anticlockwise to reduce the flame height as desired.
Push button Ignition (For models WFG617)
Thermocouple
Spark Plug
Turn appropriate burner control knob to maximum and at the
same time press the ignition switch.
Flame safeguard models (For models WFE616, WFE619,
WFG617, WFE517)
Models with flame safeguard have the same ignition procedure
as above but require the knob to continue to be depressed
after flame is established for approximately 5 seconds. If the
flame goes out when the knob is released, simply depress the
knob again, this time holding it down with slightly more force
for the same length of time.
Burner Cap
Burner
Crown
WARNING
WARNING
•Keep hands clear of burners when lighting.
Spark Plug
Thermocouple
•If burner does not light within 5 seconds, turn knob to
‘Off’ position, allow gas to disperse, then try lighting
again.
•Burners MUST be operated between ‘HIGH’ and ‘LOW’
settings only.
Gas oven burner flame
From a cold start the oven burner flame will be higher on the
left hand-side. After reaching the set temperature, the flame
will become even. This does not affect cooking results.
ENVIRONMENT
ENVIRONMENTAL
TIPS
To conserve gas, place the pan centrally over the burner and
adjust the flame so that it does not go past the edge of the
cookware.
NOTE: In the absence of electrical power, carry out the ignition
directly to the burner with a hand held ignition source.
Grill ignition (For models WFG617)
Turn Grill Control Knob onto maximum and at the same time
This burner also has flame
press Electronic Ignition Switch.
failure, so it is required to depress the knob approximately
5 seconds after the flame is established. If the flame goes out
when the knob is released, simply depress the knob again,
this time holding it down with slightly more force for the same
length of time.
Grill – in oven
Grill is electric and is operated by control knob only.
Oven ignition – electronic (For model WFG617)
Push and hold Oven Control Knob onto desired temperature
and at the same time press the Electronic Ignition Switch.
Hold control knob in for 5 seconds after ignition.
10
USING THE COOKER
USING THE GAS COOKER
Gas hotplates (Energy rating)
1
1
2
3
4
Medium heat burner (9.0 MJ/h)
Used for normal cooking and simmering with mid size
cookware items.
2
High heat burner (12.1 MJ/h)
Used for fast heating with large size cookware items.
3
Intense heat wok burner (14.2 MJ/h)
Used for very fast heating with woks and other large
size cook­ware items. Use wok support provided when
cooking with a wok.
4
Low heat burner (5.1 MJ/h)
Used for simmering and for use with small cookware
items.
NOTE: Energy ratings above are for natural gas (NG)
models.
To conserve gas, place the pan centrally over the burner
and adjust the flame so that it does not go past the
edge of the cookware.
NOTE: In the absence of electrical power, carry out the
ignition directly to the burner with a hand held ignition
source.
USING THE COOKER
11
GENERAL HINTS AND TIPS
General hints
For best baking results preheat oven for 30 minutes.
he material and finish of baking trays and dishes used
T
will affect the way foods are baked, especially base
browning.
•Enamelware, anodised aluminium, dark bakeware or
non-stick interiors and coloured exteriors will assist in
maintaining or reducing the baking time and increase
base browning.
•Ovenproof glassware or ceramics are poor
conductors of heat. The shiny surface of aluminium
or polished steel utensils and trays also reflects the
heat rather then passing it through to the food being
baked.
•Always place dishes in the centre of the shelf to
ensure even browning.
•Stand casserole dishes on a baking tray to prevent
food from spilling onto the base of the oven.
•Use ovenproof cookware, which will withstand
temperatures of 250°C.
•Use shallow casserole dishes in preference to deeper
ones as this shortens cooking time in the oven.
WARNING
CAUTION
•DO NOT place dishes, trays or baking pans directly
on the oven base as they become very hot and will
crack and craze the oven liner.
•DO NOT use baking trays larger than 30 x 35cm
(12 x 14 inches) as they will restrict the circulation
of the heat and may affect cooking performance of
the oven.
Conventional Oven
•The shelf position is critical. The temperature in
centre of the oven is the temperature shown on the
oven control knob. Single shelf baking gives optimal
cooking results.
•DO NOT place baking trays, oven dishes or foil
directly on the base of oven, as trapped heat will
crack and craze the floor of the oven liner.
Fan Forced
•Make sure shelves are evenly spaced.
•When baking more than one dish in fan forced oven,
place dishes centrally on shelves rather than several
dishes on one shelf.
•When the oven is full you may need to allow a slightly
longer baking time.
•When using different size trays or cooking different
types of food, cooking times may vary for each dish.
12
HINTS AND TIPS
WARNING
CAUTION
•DO NOT place baking trays and oven dishes
directly against the grid covering the fan at the back
of the oven.
•DO NOT place oven dishes directly on the oven base.
TIPS &AND
INFORMATION
TIPS
INFORMATION
Condensation and Steam
•During cooking steam may be produced which can
be released when opening the oven door. This is
quite normal.
•If there is any build-up of condensation on the oven
door it is recommended that it be carefully wiped
away either during or after cooking.
WARNING
WARNING
Always stand back from heated oven when opening oven
door to allow any build-up of steam or heat to release.
WARNING
WARNING
Door glass is a tough and durable material designed
to withstand heating and cooling without breaking.
However it must be remembered that it is glass and may
break, therefore must be treated with care. If you have
any questions about the glass in the oven please contact
the Service Centre on 13 13 49.
GUIDE TO BETTER GRILLING
WARNING
CAUTION
Using the Grill
Separate Grill
Grill In Oven
Grill with door open.
No definite times can be given for grilling because
this depends on your own taste and the size of the
food. These times should only be used as a guide and
remember to turn the food over halfway through the
cooking process.
rill dish must be located on slides.
G
Slides must be fully pushed in while
grilling.
Steak
15 – 20 minutes
Chops
20 – 30 minutes
Grill with door closed.
Fish
8 – 10 minutes
Bacon
4 – 5 minutes
WARNING
WARNING
Always clean the grill tray and grill tray insert after every
use. Excessive fat build up may cause a fire.
For separate grill models, the door must be open while
grilling. Ensure grill slides are fully inserted while grilling.
Always switch the grill off immediately after use.
What is grilling?
•The grill directs heat from the heat source in the grill
compartment onto the food.
For better grilling results, follow these easy instructions:
1.Preheat the grill for at least 3 minutes to obtain best
results. This will help to seal the natural juices.
2.Choose only prime cuts of meat or fish. If the cut is
less than 5mm thick it will dry out. If the cut is more
than 40mm thick, the outside may burn whilst the
inside remains raw.
3.Do not place aluminium foil under the food as this
prevents fats and oils from draining away, which
could result in a fire.
4.Baste the food during cooking with butter, olive oil
or marinade. Grilled food is better if marinated
before cooking.
•This way of cooking traps the juices inside the food
and increases the flavour.
•Grilling is suitable for tender cuts of meat, steak,
chops, sausages, fish and other foods which cook
quickly.
As a method of cooking, grilling can be used to:
•Enhance the flavours of vegetables, fish, poultry
and meat.
•Seal the surface of the food and retain the natural
juices.
This table shows how to grill different types of meat:
Beef
Lamb
You can use tenderloin, rump, sirloin.
Brush with oil or melted butter, especially
if the meat is very lean.
You can use loin chops, shortloin chops,
chump chops, and forequarter chops.
Remove skin or cut at intervals to stop
curling. Brush with oil or melted butter.
Sausages
Prick sausages to stop skin from bursting.
Poultry
Divide into serving pieces. Brush with oil.
Fish
Brush with oil or melted butter and
lemon juice.
Bacon
Remove rind. Grill flat.
5.Use tongs to turn food as a fork pierces the surface
and will let juices escape.
WARNING
WARNING
Safety warnings about the grill
•
Do not cook food on the bottom of the grill compartment. Always use the grill dish and grill
dish insert.
•Do not place foil under the food on the grill dish
insert, as this prevents fats and oils running away and
may cause a fire.
•
Always use the grill parts according to instructions.
•
Do not put thick pieces of food too near the element.
They may curl and catch fire.
•
Always turn the grill off immediately after cooking.
Left-over fat may cause a fire.
•
Always clean the grill dish and insert after use.
Fat build up may cause a fire.
•
Do not let children play with the grill.
•
Do not let children use the grill without adult supervision.
•
Do not leave the grill unattended when on.
•
Be careful not to touch hot surfaces.
•
Do not spray aerosols near the grill, when it is
turned on.
•
Do not keep flammable materials in or near the grill,
eg chemicals, aerosols, etc.
GUIDE TO GRILLING
13
OPERATING THE 120 MINUTE MECHANICAL RINGER TIMER
(WHERE SUPPLIED)
Operating your 120 minute ringer timer
To set the timer, simply turn the knob clockwise to the
required number of minutes.
Note: For any time below ten minutes, turn the knob past
the thirty minute mark, then turn it back to the required
number of minutes.
14
120 MINUTE TIMER
USING THE OVEN
Fan baking
Cooking guide
The temperature in the oven is controlled by a thermostat.
The fan distributes the heat throughout the oven
compartment. This allows:
•Select the correct shelf location for food being
cooked.
•Baking on all shelves at the same time with little
variation in browning or cooking.
•
Cooking at slightly lower temperatures.
•Cooking from a cold start so there is no need to
preheat the oven – this is good for casseroles and
fruit cakes.
•Good cooking results for cream mixtures, rich
pastries and bread but with these foods, preheating
the oven for 10 to 15 minutes is required.
Defrosting
•
Defrosting uses air that is circulated by the fan.
•
You should defrost food before cooking it.
•You can also use the defrost function to raise yeast
dough and dry fruit, vegetables and herbs.
Condensation
Condensation fogs the oven door and happens when
you are cooking large quantities of food from a cold start.
You can minimise condensation by:
•Keeping the amount of water used in cooking to
a minimum;
•
Making sure that the oven door is firmly closed;
•
Cooking casseroles with a lid.
NOTE: If you are using water in cooking, this will turn to
steam and may condense outside the oven. This is not a
problem or a fault.
•
The grill tray can be used in the oven as a baking dish.
•Make sure dishes will fit into the oven and remove
unnecessary trays or dishes before you switch it on.
•Keep edges of baking dishes at least 40mm from the
side of the oven. This allows free circulation of heat
and ensures even cooking.
•
Do not open the oven door more than necessary.
•Do not place foods with a lot of liquid into the oven
with other foods. This will cause food to steam and
not brown.
•After the oven is turned off it retains the heat for
some time. Use this heat to finish custards or to dry
bread.
•Do not use a lot of cooking oil when roasting. This will
prevent splattering oil on the sides of the oven and
the oven door. Polyunsaturated fats can leave residue
which is very difficult to remove.
•When cooking things which require a high heat from
below (e.g. tarts), place the cooking dish on a scone
tray in the desired shelf position.
•For sponges and cakes use aluminium, bright finished
or non-stick utensils.
Oven shelf location
Your oven comes with formed “easy clean” runners that
allow five positions for shelves These are numbered from
1 (the lowest shelf position) to 5 (the highest shelf
position). See diagram.
To give maximum space above and below the shelves,
load them in this way:
•
When cooking with 1 shelf, use position 3.
•When cooking with 2 shelves, use positions 2 and 4.
Not a shelf
position
5
4
3
2
1
5 shelf positions
USING THE OVEN
15
OVEN GUIDE
The following is intended as a guide. Cooking variation is natural and to be expected. You should experiment with
times, temperatures and recipes to obtain the best results to your own taste. Get to know your oven before making a
service call. Where the gas models vary from the electric models, details for gas cooking is shown in brackets. For best
results when baking, preheat your oven for 30 minutes.
FOOD
CONVENTIONAL OVEN
FAN FORCED OVEN
TEMPERATURE OVEN SHELF PO0C
SITION*
TEMPERATURE
0C
OVEN SHELF
POSITION*
TIME IN
MINUTES
Plain or fruit scones
220
2 (3)
210
Any
10 –15
Rolled biscuits
170 (180)
2
150 (170)
Any
10 –15
Spooned biscuits
190
2
180
Any
12 –15
Shortbread biscuits
160
1 or 2
150
Any
30 – 35
Hard individual
meringues
110
2
100
Any
90
Soft individual
meringues
180
2
165
Any
15 – 20
Pavlova – 6 eggs
110 (120)
1
100
Any
75
Patty cakes
190
2
180
Any
15 – 20
Sponge – 4 eggs
180
2
170
Any
20 – 30
Plain butter cake
180
2
170
Any
25 – 40
Rich fruit cake
140 (150)
2
130
Any
180
Shortcrust cornish
pasty#
200 (200/180)
2
180 (180/160)
Any
40 – 45 (10/35)
Shortcrust custard tart 200/180
(220/180)
1(3)
190/170
(200/180)
Any
20 – 30 (10/25)
Cream puffs
210
2
200
Any
25 – 30
Yeast bread
210
1
200
Any
25 – 30
Pizza
220
2
220
Any
15 – 25
* Shelf position is counted from the bottom shelf up. Bottom shelf position is 1.
# Turn down temperatures shown.
MEAT/POULTRY/FISH
RECOMMENDED TEMPERATURE 0C
MINUTES PER KILOGRAM
– Rare
200
35 - 40
– Medium
200
45 - 50
– Well done
200
55 - 60
– Medium
200
40
– Well done
200
60
Veal
180
60
Pork
200
60
Chicken
180 - 200
45 – 50
Duck
180 - 200
60 – 70
180
40 – 45 (less than 10kg)
35 – 40 (more than 10kg)
180
20
Beef
Lamb
Turkey
Fish
16
OVEN GUIDE
GET TO KNOW YOUR NEW OVEN
WITH THIS ‘SIMPLE TEST CAKE’
Roasting Meat
• You can use the grill tray and grill tray insert for
roasting meat in the oven.
•Place the meat in the oven and set the temperature
between 180°C and 200°C. (It is recommended to
wrap your meats in an oven roasting bag or foil to
prevent fats and oils from splattering, making it easier
to clean your oven.)
•Do not pierce the meat, as this will allow juices to
escape.
Although we strive for a perfect performing oven, it’s
possible that there will be some variation in colour
when baking. Therefore, we suggest this simple, easy
and delicious to make Simple Test Cake, it can help you
understand your new oven. All ovens do sometimes have
hot or cold spots, therefore it is important to judge with
your eye as you may require to rotate during baking.
125g butter, softened to room temperature
1 cup caster sugar
1 teaspoon pure vanilla essence
•When the meat is cooked, take the roast out of the
oven, wrap in aluminum foil and leave to stand for
about 10 minutes. This will help retain the juices when
the meat is carved.
4 large eggs
The table shows temperatures and cooking times for
different kinds of meat. These may vary depending on the
thickness or bone content of the meat.
4 tablespoons (80ml) full-cream milk
MEAT
RECOMMENDED
TEMPERATURE
MINUTES PER KG
Beef
200°C
Rare
35 - 40
Medium
45 - 50
2 cups self-raising flour
Pinch of salt
Method:
1.
Butter base and sides of two, 20cm straight-sided
round or square cake pans. Then line the base with
grease proof or baking paper.
2.Preheat oven to moderate 180°C (170°C fan forced)
and ensure oven shelf is in the centre position of oven.
Well done 55 - 60
3.
Cream softened butter and sugar until light in colour.
Medium
40
4.
Add vanilla essence.
Well done 60
5.
Then eggs one at a time, beating well after each addition.
6.
Sift flour and salt into the mixture and beat until
well combined.
Roasting poultry and fish
7.
Add milk and beat or stir to combine.
•Place the poultry or fish in an oven set at a moderate
temperature of 180°C.
8.
Spoon mixture equally between prepared cake pans.
Lamb
200°C
Veal
180°C
Well done 60
Pork
200°C
Well done 60
•Place a layer of foil over the fish for about three
quarters of the cooking time.
The table shows temperatures and cooking times for
different kinds of fish and poultry. These may vary
depending on the thickness or bone content of the meat.
9. Bake in preheated oven, middle shelf for about 25 to
35 minutes or until when tested with a fine cake skewer
it comes out clean or the edges of the cakes have
come away slightly from the sides of the cake pans.
10. Remove from oven to wire cake rack and rest for 5
minutes before removing from cake pans. Cool completely.
POULTRY
& FISH
RECOMMENDED
TEMPERATURE
MINUTES PER KG
To serve: Sandwich together with your favourite jam or
conserve, and dust top with pure icing sugar.
Chicken
180°C
45 - 50
Duck
180 - 200°C
60 - 70
NOTE: If desired, substitute butter for either margarine or
olive oil spread.
Turkey
180°C
40 - 45 (<10kg)
Fish
180°C
35 - 40 (>10kg)
Recipe is based on the Australian standard metric 250ml
cup and 20ml tablespoon sets.
20
CAKE TEST
17
DEALING WITH COOKING
PROBLEMS
PROBLEM
CAUSES
WHAT TO DO
Uneven cooking
Incorrect shelf position
Select shelf that puts food in centre of oven
Oven tray too large
Try other trays or dishes
Trays not in centre
Put trays in centre
Air flow in oven uneven
Rotate food during cooking
Grill tray affecting thermostat
Remove grill tray from oven on bake modes
Oven not preheated
Preheat the oven
Baking tins too large for recipe
Use correct size tins
Baking tins not evenly spaced
Stagger baking tins at least 3cm between
tins and the oven walls
Products not evenly sized or spaced
on trays
Make into same size and shape and spread
evenly over trays
Baking temperature too high
Lower the temperature
Baking tins too large for recipe
Use correct size tins
Baking tins are dark metal or glass
Change to shiny, light tins or lower the
temperature by 10°C
Food too low in oven
Cook one shelf higher
Oven door opened too frequently
during baking
Don’t open the oven door until at least half
the cooking time has passed
Baking temperature too high
Lower the temperature
Grill tray affecting thermostat
Remove grill tray from oven on bake modes
Baking temperature too high
Lower the temperature
Food too low in oven
Cook one shelf higher
Cake batter over mixed
Mix just long enough to combine the
ingredients
Baking tin too deep
Check size of tin and use recommended
size
Baking tins dark
Change to shiny light tins
Baking temperature too low
Raise the temperature
Food too low in oven
Cook one shelf higher
Baking time too short
Increase cooking time
Baked products too brown on top
Baked products too brown on
bottom
Cakes have a cracked thick crust
Baked products are pale, flat and
undercooked
Cakes fallen in centre
Incorrect baking tin size
Use correct size tin
Baking temperature too low
Raise the temperature
Baking time too short
Increase cooking time
Proportions of ingredients incorrect
for recipe
Check recipe
Opening door too early during baking Do not open door until the last quarter of
cooking time
Roast meat and potatoes not
brown in fan oven
18
Poor hot air circulation
Elevate food onto a rack to allow air
circulation
Grill tray affecting thermostat
Remove grill tray from oven on bake modes
Juices running out of meat
Do not pierce meat with fork, turn with
tongs
Grilled meats overcooked on
outside & raw in the centre
Grill at lower insert position
(Grill in oven models only)
Grilled chops & steaks curling
Cut into fat every 2cm (¾")
COOKING PROBLEMS
CLEANING THE COOKER
Ovens and hotplates are made from steel and enamel.
Do not use abrasives and harsh scourers as they may
scratch the surface.
Enamel
•Keep enamel clean by wiping it with a soft cloth
dipped in warm soapy water.
•Rub difficult stains with a nylon scourer or cream
powder cleanser.
•DO NOT use abrasive cleaners, powder cleaners, steel
wool or wax polishes.
•If you use an oven cleaner, follow the instructions on
the product carefully.
Stainless Steel
•All grades of stainless steel can stain, discolour or
becomes greasy. Clean the cooker regularly, using the
procedures outlined below, to maintain the function
and appearance of your appliance.
•Care must be taken when wiping exposed stainless
steel edges as they can be sharp.
•The front frame around the oven can be cleaned
with stainless steel cleaners if it comes soiled or
discoloured.
•A suitable cleaner can be purchased from Electrolux
Customer Care Centres.
•Always clean the stainless steel in the direction of the
grain. Going against the grain may scratch the surface.
Oven Shelves
•Chrome shelves: use detergent and hot water. If very
dirty use a non-abrasive nylon scourer.
Oven – Grill Dish and Insert
•After every use and while still warm, wash pan and
grill with warm soapy water and a suitable oven
cleaner. Rinse and dry before replacing in position.
Oven
•Use detergent, warm water (and household cloudy
ammonia if necessary) and a soft cloth. Dry thoroughly.
•
Remove shelves when the cleaning oven.
•If there is a build-up of grease use a suitable oven
cleaner, following the instructions on the cleaning
product carefully. Heat oven to 110°C and turn
oven off when 110°C is reached. Leave over-night.
The fumes will loosen stubborn grease and stains.
Remove bowl, wash with hot, soapy water and dry
well before closing oven door again. Ensure oven is
thoroughly rinsed and dried before subsequent use.
WARNING
CAUTION
DO NOT remove the oven door.
Glass
•Glass surfaces on doors and control panels are best
cleaned immediately after soiling.
•A damp cloth may help remove baked on food
deposits.
•Oven cleaners can be used to remove stubborn
marks and stains.
WARNING
WARNING
The door glass on this appliance is made from tough
durable material that withstands heating and cooling
without breaking. However it must be remembered that
it is glass, it may break. Treat it accordingly!
Should you have any questions about the glass in your
appliance, please contact the customer care centre
by calling 1300 363 640. Do not use harsh cleaners or
sharp metal scrapers to clean the oven door since they
can scratch the surface, which may result in shattering
of the glass.
Ceramic Hotplate
•Remove all spilt food and fat with the supplied razor
blade scraper, while the ceramic glass is still warm but
not hot. Wipe clean with dishwashing detergent on a
damp cloth.
•If aluminium foil, plastic items or high sugar content
foods are allowed to melt on the ceramic glass, clean
immediately with the supplied razor blade scraper
before the surface has cooled down, otherwise pitting
of the surface can occur.
NOTE: Items with high sugar content not only include jam
and fruit, but also vegetables such as peas, tomatoes and
carrots.
•When the ceramic glass is cool, apply a suitable
ceramic glass cleaner.
•It is important to follow the cleaner manufacturer’s
instructions. Remove any cleaning residue from the
surface as staining of the cooktop may occur.
•Do not use abrasive sponges or scourers, as they may
scratch the surface.
•Any pitting, staining, scratches or other surface
deterioration is excluded from the warranty.
•All stains/water marks can be removed by vigorous
cleaning, using a ceramic glass cleaner.
•Sometimes surface stains appear to be ‘bubble’
marks under the ceramic glass. These can be cleaned
with a razor blade scraper and ceramic cleaner.
CLEANING
19
CLEANING THE COOKER
(CONTINUED)
WARNING
WARNING
Grill
•Always keep the grill tray and grill tray insert clean,
as any fat deposits may catch fire.
CLEANING YOUR OVEN
ACCESSORIES
Cleaning the grill
Grill tray and grill pan
•
WARNING
WARNING
Gas Burners
•Flame port blockages should be removed with a
small metal cake skewer or nylon brush.
Wash the grill tray and grill pan in hot soapy water.
Always keep the grill pan clean as any fat left in it may
catch fire.
•Clean dirty spark plugs very gently with a nylon
scourer. Do not use steel wool. Do not bend spark plug as
it may break.
Grill Compartment
•
Clean the grill compartment with hot soapy water.
•If the caps, crowns and cups are heavily soiled, use a
non-abrasive cleaning compound.
•
If stronger action is needed use a non-abrasive oven
cleaner applied with a nylon scourer.
•Do not clean these parts with abrasive or caustic type
cleaners, or clean in a dishwasher as they will
be damaged.
Removing and replacing the oven light
WARNING
WARNING
Make sure the appliance is turned off before you remove
or replace parts, to avoid the possibility of electric shock.
Turn light anti-clockwise
to remove it for globe
Globe Specifications:
25W 9 maximum)/230 – 240V
Temperature rating 300˚C
Edison screw, small (E14)
20
CLEANING
SOLVING PROBLEMS
Faults
Further information
If there is a problem with the oven and/or grill, please:
If you need more information, service, replacement parts
or have a warranty enquiry, please contact the Customer
Care Centre:
•Check the points listed below before calling for
service. It may be possible to avoid a call by fixing the
problem yourself – and so continue cooking.
•For cooking problems, refer to “Dealing with cooking
problems”.
NOTE: We may charge for service even in the guarantee
period if your problem is due to the causes listed below.
PROBLEM
Oven or grill not working
•
Australia – 1300 363 640, 8.00am - 5.00pm EST
Monday - Friday
•
New Zealand – 0800 436 248, 8.00am - 5.00pm
EST Monday - Friday
Please have the following information ready: Model, Model
Number and Serial Number. This is shown on the data
plate which is visible when the oven door is open.
POSSIBLE CAUSES
WHAT TO DO
Power not turned on
Switch on electricity
Household fuse blown
Check fuses
Controls incorrectly set
Reset controls
Circuit breaker tripped
Check circuit breaker
Clock not set
Set time of day on timer
Gas is off
Check gas is supplied to the cooker
Note: If the household fuse continues to blow, call the Electrolux Customer Care Centre.
Oven not heating enough
Foil or trays on bottom of oven
Remove foil or trays
Light and fans on continuously
Timer not in manual mode
Set timer to manual mode
Oven not working
Timer not in manual mode
Set timer to manual mode
Household fuse blown
Check fuses
Note: If the household fuse continues to blow, call the Electrolux Customer Care Centre.
Oven light not working
Household fuse blown
Check fuses
Circuit breaker tripped
Check circuit breaker
Lamp blown or loose in socket
Replace or tighten lamp
Note: If the household fuse continues to blow, call the Electrolux Customer Care Centre.
Cooker smoking when first used
Protective oils being removed
Turn grill on high for 30 mins and
then the oven on 220°C for 1 hour
Too much condensation building up
when baking
Too much water used when cooking
Reduce amount of water
Smells when first using oven
Protective oils being removed
This is normal
120 minute timer ring not audible
Timer not wound sufficiently
Turn timer knob past 20 minutes
then turn back to required number
of minutes
Gas hotplates not working
Power not turned on at appliance
Switch on electricity
Household fuse has blown or power
supply is turned off
Check fuses
Gas is off
Check gas is supplied to the cooker
Burner parts or spark plugs are wet
or dirty
Clean and dry burners or spark
plugs
Timer flashing
Power failure or interruption
Reset time of day
Stains appear to be under ceramic glass
These marks are on the surface of
the ceramic glass.
Clean marks off with a razor blade
scraper and ceramic glass cleaner.
Leave oven door open after
cooking
Note: In the event of a power failure the gas burners may still be lit with a handheld igniter and used. Take care to avoid
letting unburnt gas flow for more than 5 seconds when attempting to light the burner.
SOLVING PROBLEMS
21
INSTALLING THE APPLIANCE
(600mm wide product)
Cabinet requirements
Recommended cabinet design
This appliance has been designed to ‘slot-in’ to a 600mm
wide gap built-in standard kitchen cabinets. As such the
appliance can be installed to suit the height of the benches
600mm
Clearance to side wall
(refer notes)
600mm
minimum
This allows the cooker to integrate well into contemporary
kitchens. The cooker may also be installed at the end of
a line of benches or with a free space on either side.
•Electric hob models must not be installed in a corner;
they must be installed at least 100mm from the
side wall. Gas hob models must be installed with a
minimum clearance of 100mm to side walls made
of unprotected combustible materials.
900mm (NOM)
720mm (NOM)
630mm
•For gas models refer to section 6.10.1 in AS/NZS 5601.1 for all relevant clearances.
WARNING
WARNING
910mm minimum
This appliance has been tested and approved to the
relevant Australian Standards. It is designed to cook
food, it will get hot. Cabinet materials must be capable
of withstanding 85oC. Installation into lower temperature
tolerant cabinetry (e.g. vinyl coated) may result in
deterioration of the low temperature coating by discolour
or bubbling.
anti-tilt plate
1.25m electrical
service cord (if fitted)
596mm minimum
Electrolux Home Products cannot accept responsibility
for damage caused by installation into low temperature
tolerant cabinets.
Installation and service warning
WARNING
WARNING
•Only an authorised person must install and service
this appliance (Certificate of Compliance to be
retained).
•In order to avoid a hazard, the installation
instructions MUST be followed.
•In order to avoid the appliance tipping, the anti-tilt
plate MUST be installed.
•Appliances requiring connection to 230 – 240V
MUST be earthed.
•An authorised person should inspect this appliance
every 5 years.
•This appliance must NOT be installed on a base,
box or in a closed cupboard.
•If the electrical supply cord is damaged, a qualified
person MUST replace the cord to avoid a hazard or
void your warranty.
22
INSTALLATION
Preparing for installation
1.Check that the required services are correctly positioned
(see electrical and gas services requirements section and
cabinet requirements section).
2.Ensure that cabinetry has correct details (see cabinet
requirements section).
3.
Unpack the cooker.
4.
Remove the foam pack containing accessories.
5.Remove the internal pack from the oven and position shelf
supports and grill trays.
6.Remove the 2 screws for the splashback from the rear
panel, and fit it to the unit with the same screws.
Fitting the anti-tilt plate & stabilising bolt
Rear cover
Cooker Stability
NOTE: To ensure cooker stability, both the anti-tilt plate
and stability bolt MUST be installed on all cookers
(electric and gas).
Installation Sequence
48mm to side
of plate
1.The cooker is delivered with the anti-tilt plate. Locate
the anti-tilt plate against the rear wall. If locating
between 2 cupboards, then fit the plate in the centre
of the space. If locating the cooker at the end of a
cupboard, then position the side of the plate 48mm
from the cupboard.
5mm clearance
Anti-tilt
plate
NOTE: If cooker cannot be located against rear
wall, move anti-tilt plate forward to suit.
Rear adjustable foot
2.Securely fix the anti-tilt plate to the floor with
appropriate fasteners.
3.Slide the cooker back into the anti-tilt plate so that
rear cover rests against the rear wall.
Then check the height and level of the cooker.
If required, pull the cooker back out and adjust the
levelling feet as required.
4.Cut the cable tie from the stability bolt.
Stability bolt
5.Rotate the stability bolt 180 clockwise until it is
pointing to the left like the picture below.
6.The stability bolt should now be able to drop to
the floor.
7.Mark the position for the stability bolt on the floor.
8.Pull the cooker out and drill the bolt hole, using a
6.5mm masonry or wood drill. Minimum 30mm deep
for concrete.
Front adjustable feet
Kick panel
ø6.5mm drilled
location hole
9.Reposition the cooker back into place, then fit the
stability bolt into the drilled hole.
10.Connect gas and electricity supply (refer to pages
following).
Installing splashback
11.Fit the kick panel onto the cooker.
Fit splashback to rear of hob with the two screws provided.
INSTALLATION
23
INSTALLING THE APPLIANCE
(540mm wide product)
Cabinet Requirements
This appliance has been designed to ‘slot-in’ to a 540mm
wide gap built-in standard kitchen cabinets. As such the
appliance can be installed to suit the height and depth
of benches and behind the kick rail of the cabinets. This
allows the cooker to integrate well into contemporary
kitchens. The cooker may also be installed at the end of
a line of benches or with a free space on either side.
Position anti-tilt plate to the rear wall and 25mm from
side of cupboard. Securely fix anti-tilt plate to the floor
with fasteners. Adjust levelling feet on cooker as required.
Stabilising bolt
Stability
bolt
•Electric hob models must not be installed in a corner;
they must be installed at least 100mm from the
side wall. Gas hob models must be installed with a
minimum clearance of 100mm to side walls made
of unprotected combustible materials.
•For gas models refer to section 6.10.1 in AS/NZS 5601.1 for all relevant clearances.
Kick-panel
6.5mm
ø drilled
location hole
Front
adjustable
feet
emove oven door - to be done by qualified personnel
R
only. (Refer to procedure).
Clearance to side wall
(refer notes)
2. Remove screws from kick panel. To remove kick panel
lift kick panel upwards to release the two location
tabs from the holes in the bottom of the panel.
550mm
minimum
3. Position cooker into the ant-tilt plate and then mark
the position for the stability bolt hole on the floor.
600mm min.
to combustible
material
910mm
4. Pull cooker out and drill the bolt hole, using a 6.5mm
masonry or wood drill bit. The bolt hole needs to be
a minimum of 30mm deep when fixing the oven to
concrete.
540mm
Anti-tilt plate
1.25m electrical
service cord (if fitted)
5.
Reposition cooker back into place and fit the stability
bolt through the slot and into the drilled hole.
6.
If the cooker is placed on a base, measures must be
taken to prevent the appliance slipping from the base.
630mm
WARNING
WARNING
WARNING
WARNING
In order to avoid accidental tipping of the appliance (for
example, by a child climbing onto the open oven door),
the anti-tilt plate and stabilising bolt MUST be installed.
For your safety this cooker is designed to be moved out
of position by a qualified person only.
Installing Splashback
Rear cover
25mm to
side of plate
5mm clearance
Anti-tilt
plate
Rear adjustable foot
24
INSTALLATION
Fit splashback to rear of hob with the two screws provided.
WIRING REQUIREMENTS
CONNECTING TO SERVICES AND
COMMISSIONING
The cooker MUST be installed in compliance with:
This appliance must be installed by an authorised person,
according to all codes and regulations of:
•
Wiring connections in AS/NZS 3000 Wiring Rules
•Local regulations, municipal building codes and other
statutory regulations
•For New Zealand Only:
The cooking range must be connected to the supply
by a supply cord fitted with the appropriately rated
plug that is compatible with the socket-outlet fitted
to the final sub-circuit in the fixed wiring that is
intended to supply this cooking range.
Data plate
gives information about rating
•
Electrical supply authorities.
•
Building regulations.
•
Local government and council authorities.
•AS/NZS 5601.1 (particular attention to clause 6.10.1
and figure 6.3 on page 97, and clause 6.10.1.11).
•AS/NZS 3000 (particular attention to clause 4.7.1
and clause 3.9).
Electrical supply connection
is located behind the bottom of the
oven door
•WFE619 and WFE517 models are fitted with
a 20-Amp service cord.
•A functional switch MUST be provided near the
appliance in an accessible position (AS/NZS 3000 Clause 4.7.1).
•WFE616 and WFG617 models are fitted with
a 10-Amp service cord.
•Wiring MUST be protected against mechanical failure
(AS/NZS 3000 - Clause 3.9).
Hard wiring detail (WFE547, WFE642 and WFE647
models only)
•The cooker requires a means of all pole disconnection
incorporated into the fixed wiring. This MUST have a
disconnection gap of 3mm.
1.Remove terminal cover plate from rear panel of
appliance.
•
The cooker MUST be properly earthed.
2.Fit wires through hole in cover plate and make
connections to terminals.
•This range must be connected with cable of 75°C
rating minimum.
3.Engage wires into plastic clip. Secure plastic clip with
two long silver screws (supplied in separate bag).
•This product has passed the insulation resistance test
after manufacture. If the resistance reading is low at
installation, it is probably caused by moisture from
the atmosphere being absorbed by the elements
after the range has been produced. (Pass at 0.01MΩ
AS/NZS 3000 Wiring Rules Clause 8.3.6.2).
4.
Replace cover plate onto rear panel.
Plastic clips
NOTE: When connections are made to a multi-phase
230/240V supply, the bridge piece MUST be removed
from between the active connections.
Plastic clip
securing points
TIPS &AND
INFORMATION
TIPS
INFORMATION
Before you cook in your new oven it is important that
the protective oils used in the manufacture of the
product be removed.
•Make sure that the room is well ventilated (to allow
smoke to escape).
•New appliances can have an odour during first
use. It is recommended to ‘run in’ the oven
before cooking for the first time Operate the
oven(s), empty, at a temperature of 180°C for
approximately 30 minutes. For appliances with
a separate grill, run the grill on maximum for 15
minutes WITH GRILL DOOR OPEN Please ensure
that the room is well ventilated during this process.
RATED POWER INPUT
MODEL
TOTAL KW
A1 KW
A2 KW
WFE547
10.5
4.1
6.4
WFE642
8.7
2.3
6.4
WFE647
10.5
4.1
6.4
MODEL
TOTAL
WATTAGE
(KW)
TOTAL
CURRENT
(AMPS)
CABLE
SECTION
(MM2)
MINIMUM
TEMPERATURE
RATING (°C)
WFE642
8.7
36.3
2.5
75
WFE647
10.5
43.8
4.0
75
WFE547
10.5
43.8
4.0
75
INSTALLATION
25
650mm
INSTALLATION
Wiring connection for gas cooker
Operation on SNG (WFG617 models only)
To allow for disconnection of the appliance after
installation, the plug must be accessible after installation.
•If the cooker is to be used with SNG, then the grill
burner MUST be modified by the replacement of the
shutter, which fits into the throat of the grill burner.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•A conversion kit can be obtained by contacting the
Customer Care Centre.
Installing the gas cooker gas connection
Read these points before connecting to the gas supply:
•The cooker inlet connection point has a ½” BSP
external thread. See diagram below.
• An NG regulator or a LPG test point fitting is
supplied.
• It is recommended to fit the regulator or test point
fitting to the appliance connection point, then fit
either hard piping or a high level flexible connection
(AS/NZS 5601.1 clauses 5.9 and 6.10.1.9) which is then
attached to the consumer hard piping.
•
Grill deflector
Ensure installation allows withdrawal of appliance.
Restraining device
anchor points
Gas connection
point
Grill shutter
175mm
650mm
WARNING
WARNING
Disconnect electric power before removing control panel.
1.
Remove the control panel.
2. Remove the 2 screws from grill deflector (refer to
diagram above)
3.Remove the existing NG shutter securing screw (refer
to diagram above) and slide upwards to disengage
from grill burner.
Operation on universal LPG/propane
1.The appliance inlet fitting provided MUST be
orientated
so that the pressure nipple is accessible.
2. The inlet fitting has ½” BSP internal thread at the inlet
and outlet.
4.Slide the SNG shutter into position and secure with
screws.
Testing the gas cooker
WARNING
WARNING
You MUST test the cooker after installation, before you
hand it over to the customer.
You MUST have a manometer and a connecting tube.
26
INSTALLATION
INSTALLATION
Gas requirements
This appliance must be installed by an authorised person,
according to all codes and regulations of:
•AS/NZS 5601.1 (particular attention to clause 6.10.1
and figure 6.3 on page 97, and clause 6.10.1.11)
The cookers come in two gas types: Natural gas and
Universal LPG. Before installation check that the cooker
is suitable for the gas supply. To do this check the gas
type on the carton sticker or on the data plate behind the
bottom of the oven door. The following table shows the
supply and operating pressures for various gas supplies.
GAS TYPE
NATURAL
GAS
Supply pressure at inlet to
1.13 kPa
appliance regulator (if fitted) Minimum
UNIVERSAL
LPG
2.75* kPa
Operating pressure
at appliance test point for
WFG617
1.00 kPa
2.75 kPa
Operating pressure
at appliance test point for
WFE517, WFE616, WFE619
1.00 kPa
2.60 kPa
*Some models do not require an appliance regulator
for LPG operation, in which case the supply pressure
and operating pressure are the same. In such cases
the supply pressure is adjusted at a regulator in the
consumer piping, typically located at the cylinder.
The following table shows the injector sizes for each burner.
INJECTOR ORIFICE
NATURAL GAS
UNIVERSAL
LPG
Low heat burner
1.00 mm
0.55 mm
Medium heat burner
1.35 mm
0.70 mm
High heat burner
1.60 mm
0.90 mm
Intense heat wok
burner
1.75 mm
1.00 mm
Oven – main injector 1.60 mm
0.82 mm
Grill
1.50mm
0.82mm
Oven – bypass
screw
0.73mm
0.45mm
Checking pipe size
To work out a suitable pipe size for connection use:
•
The information in this table.
GAS TYPE
NATURAL
GAS
UNIVERSAL
LPG
Hourly gas consumption for
WFG617
63.3MJ/h
52.4MJ/h
Hourly gas consumption for
WFE616, WFE619
40.4MJ/h
34.4MJ/h
Hourly gas consumption for
WFE517
37.3 MJ/h
30.2MJ/h
•Information about the length of the run, number of
elbows, tees and bends, the available service pressure
and the supply requirements.
NOTE: AS/NZS 5601.1 will help you with this matter.
INSTALLATION
27
LPG CONVERSION DONG YANG –
IMPORTANT (MODELS WFE517, WFE616 AND WFE619 ONLY)
This appliance is fitted with Natural Gas burner injectors.
The conversion kit contains 5 injectors and 1 LPG sticker.
9.One by one, turn the knobs to minimum and screw
in the bypass screw (accessible when the knob is
removed) until a small stable flame results. Turn the
knob to maximum and then back to minimum to
ensure that the correct minimum flame is maintained.
1.Remove the hotplate burners to access the hotplate
injectors. Replace the factory fitted NG injectors with
the appropriate injectors, as supplied.
10.Attach the LPG sticker to the cooker, near the gas
supply inlet. Cover the Natural Gas label that is
factory fitted.
Please follow the procedure below if a conversion to suit
UNIVERSAL LPG is required.
2.Unscrew the hex nut from the regulator. The hex nut,
brass washer and nylon insert will disengage as an
assembly.
3.Unclip the nylon insert from the nut assembly by
rotating the insert 1/4 turn, and pulling it free.
4.
Hex nut assembly,
fully screwed down
Turn over the insert, and clip back into position.
5.Refit the hex nut assembly to the regulator ensuring
that it is fully screwed down. The regulator is now set
for connection to LPG.
6.Turn on the gas supply and at each new connection
check for leaks using soapy water: each hotplate
valve should be turned on, one at a time, and the
injector hole blocked off for several seconds.
7.The operation of the regulator can be confirmed by
connecting a manometer to the pressure test point
located on the side of the regulator body adjacent
to the outlet. With the appliance operating check the
outlet pressure:
Hex nut assembly,
removed from
regulator and insert
disassembled
•When all burners of the appliance are operating
at maximum,
•When the smallest burner of the appliance is
operating at minimum.
Under these conditions the outlet pressure should not
vary from the nominal outlet pressure of 2.60kPa by
more than ±0.52kPa.
8.If the regulator appears to not be performing
satisfactorily then check the following points:
•If the outlet pressure is consistently too low then
the inlet pressure may be too low and
adjustment of an upstream regulator may be
needed, or an upstream regulator or valve with
insufficient flow capacity may be present in
the gas supply line. If this is suspected then it
may be necessary to repeat the checks whilst
measuring both the inlet and outlet pressure to
determine if the inlet pressure is in the range 2.75
– 7.00kPa.
•Check that the insert has been fitted correctly.
•
Check that the turret screw is fully screwed down.
•Check that the regulator has been fitted to the
gas supply line in the correct orientation, the
arrow on the base of the body indicates the
direction of
gas flow.
Once these checks have been completed, if the
regulator still fails to perform in a satisfactory manner
it should be replaced.
28
LPG CONVERSION
Insert oriented for
Natural Gas operation
Insert oriented for
LPG operation
LPG CONVERSION CHANT –
IMPORTANT (MODELS WFE517, WFE616 AND WFE619 ONLY)
This appliance is supplied set up for Natural Gas usage.
A conversion kit is included with the product for Universal
LPG usage. The conversion kit contains 5 injectors and 1
LPG sticker.
Please follow the procedure below if a conversion to suit
UNIVERSAL LPG is required:
1.Remove the hotplate trivets, burner caps and burner
crowns to access the hotplate injectors. Replace the
factory fitted injectors with the appropriate injectors, as
supplied. Refer to injector orifice table for injector sizes.
The injector size is stamped on the side of the injector.
2.Unscrew the top hat nut from the regulator. The top
hat nut and control pressure spring assembly will
disengage as an assembly.
3.Unscrew the threaded pin from top hat.
4.Upturn threaded pin, so spring is free and screw pin
back into the top hat until firm.
5.Refit the top hat nut assembly to the regulator ensuring
that it is fully screwed down. The regulator is now set
for connection to LPG.
6.Turn on the gas supply and at each new connection
check for leaks using soapy water. Each hotplate valve
should be turned on, one at a time, and the injector
hole blanked off for several seconds.
7.The operation of the regulator can be confirmed by
connecting a manometer to the pressure test point
located on the side of the regulator body adjacent to
the outlet.
With the appliance operating check the outlet pressure:
• When all burners of the appliance are operating
at maximum,
• When the smallest burner of the appliance is operating at minimum.
Under these conditions the outlet pressure should not
vary from the nominal outlet pressure of 2.60kPa by
more than ±0.52kPa.
8.If the regulator appears to not be performing
satisfactorily then check the following points:
• If the outlet pressure is consistently too low then
the inlet pressure may be too low and adjustment
of an upstream regulator may be needed, or an
upstream regulator or valve with insufficient flow
capacity may be present in the gas supply line.
If this is suspected then it may be necessary to
repeat the checks whilst measuring both the
inlet and outlet pressure to determine if the inlet
pressure is in the range 2.75 – 7.00kPa.
• Check that the insert has been fitted correctly.
• Check that the turret screw is fully screwed down.
• Check that the regulator has been fitted to the gas
supply line in the correct orientation, the arrow on
the base of the body indicates the direction of
gas flow.
Once these checks have been completed, if the regulator still
fails to perform in a satisfactory manner it should be replaced.
9.One by one, turn the knobs to minimum and screw
in the bypass screw (accessible when the knob is
removed) until a small stable flame results. Turn the
knob to maximum and then back to minimum to ensure
that the correct minimum flame is maintained.
10.Attach the LPG sticker to the cooker, near the gas
supply inlet. Cover the Natural Gas label that is
factory fitted.
A
B
Turn top hat
nut anticlockwise
and remove
Top hat nut assembly,
fully screwed down
C
D
Configuration for
Natural Gas
E
F
Configuration for LPG
G
H
Bypass screw
Flame size adjusted
to maximum
Flame size adjusted
to minimum
Control knob shaft
LPG CONVERSION
29
TESTING THE OPERATION OF
THE GAS COOKER
NOTE: You MUST test the cooker after installation, before
you hand it over to the customer.
You MUST have a manometer and a connecting tube.
Checking gas supply
1.
Once these checks have been completed, if the regulator
still fails to perform in a satisfactory manner it should be
replaced.
Check the manometer zero point is correct.
2.Connect the manometer to the cooker pressure test
point. This is located on the regulator or LPG inlet
fitting.
3.Turn on the gas supply and the electricity and try to
ignite the gas.
NOTE: It will take additional time to light the gas
for the first time as air needs to be purged from the
pipes.
4.Check the operating pressure for the particular gas
type.
NOTE: For LPG cookers: Adjust the regulator if necessary
(this may be remote from the cooker).
For Natural Gas cookers
Regulators are supplied pre-adjusted and configured
by the component maker for use with Natural Gas. The
appliance installer is not required to make an adjustment
to obtain the correct outlet pressure setting.
An arrow on the base of the regulator indicates the
direction of gas flow when the inlet and outlet of the
regulator are orientated correctly. When the regulator
has been fitted check for leaks from the connections
with soapy water.
Checking the Function of the Regulator
With the appliance operating check the outlet pressure:
•When all burners of the appliance are operating
at maximum,
•When the smallest burner of the appliance is
operating at minimum.
Under these conditions the outlet pressure should not
vary from the nominal outlet pressure by more than
±20% of the nominal outlet pressure (ie ±0.20kPa for
Natural Gas).
If the regulator appears to not be performing
satisfactorily then check the following points.
1.If the outlet pressure is consistently too low then the
inlet pressure may be too low and adjustment of an
upstream regulator may be needed, or an upstream
regulator or valve with insufficient flow capacity may
be present in the gas supply line. If this is suspected
then it may be necessary to repeat the checks whilst
measuring both the inlet and outlet pressure to
determine if the inlet pressure is in the range
1.13 – 5kPa.
30
2.Check that the regulator has been fitted to the gas
supply line in the correct orientation, the arrow on the
base of the body indicates the direction of gas flow.
TESTING
Testing the cooker features
•Observe the flame appearance on each burner. If it
is much smaller or larger than expected, then the
injector size needs checking.
NOTE: When flame is unsatisfactory, then refer to the
Electrolux Technical Publications and correct the fault, if
possible.
When maximum flame appearance is correct, then check
the turn-down setting on each burner. If the settings
appear to be incorrect, proceed as follows:
1.Adjust the bypass screw mounted on the body of
each hotplate control cock. This is accessible when
the control knob is removed.
2.Check the ignition on all burners both separately
and in combination.
3.Check the operation of the electrical components,
if applicable.
4.If you are satisfied that the cooker is operating
correctly, then turn it off and show the customer
how to use it.
Make sure you ask the customer to operate the
controls.
NOTE: If the cooker cannot be adjusted to perform
correctly, then inform the customer of the problem and
put a warning notice on the cooker. If the problem is
dangerous, then disconnect the cooker. If there is a fault,
then the customer should be advised to contact the
manufacturer’s local service organisation or the retailer.
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: BUILT-IN OVEN, COOKTOP
AND FREESTANDING COOKERS
This document sets out the terms and conditions of the product
warranties for Electrolux Appliances. It is an important document.
Please keep it with your proof of purchase documents in a safe place
for future reference should you require service for your Appliance.
1. In this warranty:
(a) ‘acceptable quality’ as referred to in clause 10 of this warranty has
the same meaning referred to in the ACL;
(b) ‘ACL’ means Schedule 2 to the Competition and Consumer Act 2010;
(c) ‘Appliance’ means any Electrolux product purchased by you and
accompanied by this document;
(d) ‘ASC’ means Electrolux authorised service centres;
(e) ‘Electrolux’ means Electrolux Home Products Pty Ltd of 163
O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in
respect of Appliances purchased in Australia and Electrolux (NZ)
Limited (collectively ‘Electrolux’) of 3-5 Niall Burgess Road, Mount
Wellington, in respect of Appliances purchased in New Zealand;
(f) ‘major failure’ as referred to in clause 10 of this warranty has the
same meaning referred to in the ACL and includes a situation when
an Appliance cannot be repaired or it is uneconomic for Electrolux, at
its discretion, to repair an Appliance during the Warranty Period;
(g) ‘Warranty Period’ means the Appliance is warranted against
manufacturing defects in Australia for 24 months and in New Zealand
for 24 months, following the date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not having purchased
the Appliance for re-sale, and ‘your’ has a corresponding meaning.
2. This warranty only applies to Appliances purchased and used in Australia
or New Zealand and used in normal domestic applications and is in
addition to (and does not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia or New Zealand.
3. During the Warranty Period Electrolux or its ASC will, at no extra charge
if your Appliance is readily accessible for service, without special
equipment and subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Electrolux or its ASC may
use remanufactured parts to repair your Appliance. You agree that
any replaced Appliances or parts become the property of Electrolux.
This warranty does not apply to light globes, batteries, filters or similar
perishable parts.
4. Parts and Appliances not supplied by Electrolux are not covered by
this warranty.
5. To the extent permitted by law, you will bear the cost of transportation,
travel and delivery of the Appliance to and from Electrolux or its ASC. If
you reside outside of the service area, you will bear the cost of:
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and from Electrolux or
its ASC.
In all instances, unless the Appliance is transported by Electrolux or an
Electrolux authorised representative, the Appliance is transported at the
owner’s cost and risk while in transit to and from Electrolux or its ASC.
6. Proof of purchase is required before you can make a claim under
this warranty.
7. You may not make a claim under this warranty unless the defect claimed
is due to faulty or defective parts or workmanship. Electrolux is not liable
in the following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions supplied with
the Appliance;
(b) the Appliance is modified without authority from Electrolux in writing;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced;
(d) the Appliance was serviced or repaired by anyone other than
Electrolux, an authorised repairer or ASC.
8. This warranty, the contract to which it relates and the relationship
between you and Electrolux are governed by the law applicable where
the Appliance was purchased. Where the Appliance was purchased in
New Zealand for commercial purposes the Consumer Guarantee Act
does not apply.
9. To the extent permitted by law and subject to your non-excludable
statutory rights and warranties, Electrolux excludes all warranties and
liabilities (other than as contained in this document) including liability for
any loss or damage whether direct or indirect arising from your purchase,
use or non use of the Appliance.
10. For Appliances and services provided by Electrolux in Australia,
the Appliances come with a guarantee by Electrolux that cannot be
excluded under the ACL. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the Appliance
repaired or replaced if the Appliance fails to be of acceptable quality and
the failure does not amount to a major failure.
The benefits to you given by this warranty are in addition to your other
rights and remedies under a law in relation to the Appliances or services
to which the warranty relates.
11. At all times during the Warranty Period, Electrolux shall, at its discretion,
determine whether repair, replacement or refund will apply if an
Appliance has a valid warranty claim applicable to it.
12. For Appliances and services provided by Electrolux in New Zealand,
the Appliances come with a guarantee by Electrolux pursuant to the
provisions of the Consumer Guarantees Act, the Sale of Goods Act and
the Fair Trading Act.
13. To enquire about claiming under this warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms
of this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
14. You accept that if you make a warranty claim, Electrolux and its ASC
may exchange information in relation to you to enable Electrolux to meet
its obligations under this warranty.
Important Notice
Before calling for service, please ensure that the steps listed in clause 13 above have been followed.
FOR SERVICE
or to find the address of your nearest
state service centre in Australia
PLEASE CALL 13 13 49
For the cost of a local call (Australia only)
FOR SERVICE
or to find the address of your nearest
authorised service centre in New Zealand
FREE CALL 0800 10 66 10
(New Zealand only)
GOV_Warr_Aug13
SERVICE AUSTRALIA
ELECTROLUX HOME PRODUCTS
electrolux.com.au
SERVICE NEW ZEALAND
ELECTROLUX (NZ) Limited
electrolux.co.nz
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in Australia
PLEASE CALL 13 13 50
For the cost of a local call (Australia only)
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
(New Zealand only)
WARRANTY
31
For more information on all Westinghouse
appliances, or for dimension and installation
information, call into your retailer, phone or email
our customer care team or visit our website:
AUSTRALIA
phone: 1300 363 640
fax:
1800 350 067
email: customercare@electrolux.com.au
web:
westinghouse.com.au
NEW ZEALAND
phone: 0800 436 245
fax:
0800 225 088
email: customercare@electrolux.co.nz
web:
westinghouse.co.nz
TOP SERVICE
Top Service encompasses the after sales service
provided by The Electrolux Group to consumers
including delivery, home service and spare parts.
Westinghouse. We are part of the Electrolux family.
Share more of our thinking at electrolux.com.au
and WESTINGHOUSE are trademarks of Westinghouse Electric Corporation.
Used under license. All Rights Reserved.
P/No: 0342 001 625 Rev: 002 ECN No. 048408E
© 2015 Electrolux Home Products Pty Ltd.
ABN 51 004 762 341
WMAN_W600FS_UM_Jun15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising