LG B30AWYN7G6 Owner’s Manual

MFL41032512 2018. 8. 28. 오오 10:28 Page 1
ENGLISH
OWNER’S MANUAL
AIR
CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : CEILING CONCEALED DUCT
MFL41032512
Rev.00_081618
www.lg.com
Copyright © 2014 - 2018 LG Electronics Inc. All Rights Reserved.
MFL41032512 2018. 8. 28. 오오 10:28 Page 2
2
TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
• Do not cool excessively indoors. This may be harmful for your health and may consume
more electricity.
• Block sunlight with blinds or curtains while operating the air conditioner.
• Keep doors or windows closed while operating the air conditioner.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air
conditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may
block the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
MFL41032512 2018. 8. 28. 오오 10:28 Page 3
IMPORTANT SAFETY INSTRUCTIONS
3
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
! WARNING
It can result in serious injury or death when the directions are ignored
! CAUTION
It can result in minor injury or product damage when the directions are ignored
! WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• The product shall be installed according to the Wiring regulations of the corresponding
country.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
Installation
• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
There is risk of fire or electric shock.
• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service
Center. Do not disassemble or repair the product. There is risk of fire or electric shock.
• Always ground the product. There is risk of fire or electric shock.
• Install the panel and the cover of control box securely. There is risk of fire or electric shock.
• Always install a dedicated circuit and breaker. Improper wiring or installation may cause fire or
electric shock
• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.
• Do not modify or extend the power cable. There is risk of fire or electric shock.
• Do not install, remove, or re-install the unit by yourself (customer). There is risk of fire, electric
shock, explosion, or injury.
• Be cautious when unpacking and installing the product. Sharp edges could cause injury. Be
especially careful of the case edges and the fins on the condenser and evaporator.
• For installation, always contact the dealer or an Authorized Service Center. There is risk of
fire, electric shock, explosion, or injury.
• Do not install the product on a defective installation stand. It may cause injury, accident, or
damage to the product.
• Be sure the installation area does not deteriorate with age. If the base collapses, the air
conditioner could fall with it, causing property damage, product failure, and personal injury.
• Do not let the air conditioner run for a long time when the humidity is very high and a door or
a window is left open. Moisture may condense and wet or damage furniture.
• The appliance shall be installed in accordance with national wiring regulations.
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
MFL41032512 2018. 8. 28. 오오 10:28 Page 4
4
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
• Means for disconnection must be incorporated in the fixed wiring in accordance with the
wiring rules.
Operation
• Take care to ensure that power cable could not be pulled out or damaged during operation.
There is risk of fire or electric shock.
• Do not place anything on the power cable. There is risk of fire or electric shock.
• Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock.
• Do not place a heater or other appliances near the power cable. There is risk of fire and
electric shock.
• Do not allow water to run into electric parts. There is risk of fire, failure of the product, or
electric shock.
• Do not store or use flammable gas or combustibles near the product. There is risk of fire or
failure of product.
• Do not use the product in a tightly closed space for a long time. Oxygen deficiency could
occur.
• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the
product on. Do not use the telephone or turn switches on or off. There is risk of explosion or
fire
• If strange sounds, or smell or smoke comes from product. Turn the breaker off or disconnect
the power supply cable. There is risk of electric shock or fire.
• Stop operation and close the window in storm or hurricane. If possible, remove the product
from the window before the hurricane arrives. There is risk of property damage, failure of
product, or electric shock.
• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter,
if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.
• If the product is soaked (flooded or submerged), contact an Authorized Service Center. There
is risk of fire or electric shock.
• Be cautious that water could not enter the product. There is risk of fire, electric shock, or
product damage.
• Ventilate the product from time to time when operating it together with a stove, etc. There is
risk of fire or electric shock.
• Turn the main power off when cleaning or maintaining the product. There is risk of electric
shock.
• When the product is not be used for a long time, disconnect the power supply plug or turn off
the breaker. There is risk of product damage or failure, or unintended operation.
• Take care to ensure that nobody could step on or fall onto the outdoor unit. This could result
in personal injury and product damage.
MFL41032512 2018. 8. 28. 오오 10:28 Page 5
IMPORTANT SAFETY INSTRUCTIONS
5
• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant
levels may cause failure of product.
• Install the drain hose to ensure that water is drained away properly. A bad connection may cause
water leakage.
• Keep level even when installing the product. To avoid vibration or water leakage.
• Do not install the product where the noise or hot air from the outdoor unit could cause a problems
for your neighbors.
• Use two or more people to lift and transport the product. Avoid personal injury.
• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause
corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause
product malfunction or inefficient operation.
Operation
• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.) This could
harm to your health.
• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a
consumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of
property.
• Do not block the inlet or outlet of air flow. It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc. There is risk of fire, electric
shock, or damage to the plastic parts of the product.
• Do not touch the metal parts of the product when removing the air filter. They are very sharp! There
is risk of personal injury.
• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and
failure of product.
• Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty
filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.
• Do not insert hands or other objects through the air inlet or outlet while the product is operated.
There are sharp and moving parts that could cause personal injury.
• Do not drink the water drained from the product. It is not sanitary and could cause serious health
issues.
• Use a firm stool or ladder when cleaning or maintaining the product. Be careful and avoid personal
injury.
• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and
new batteries or different types of batteries. There is risk of fire or explosion
• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or
explode.
• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not
use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other
health hazards.
• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if
the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.
ENGLISH
! CAUTION
Installation
MFL41032512 2018. 8. 28. 오오 10:28 Page 6
6
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
2
TIPS FOR SAVING ENERGY
3
IMPORTANT SAFETY INSTRUCTIONS
7
BEFORE USE
7
Preparing for operation
7
Usage
7
Cleaning and maintenance
7
Service
8
PRODUCT INTRODUCTION
8
Name of Components
9
Deluxe wired remote controller (PDRCUDC0)
10
RS2 Standard remote controller (PQRCVSL0 / PQRCVSL0QW)
11
Monitoring – Demand Response Mode(DRM)
11
It is the function to display Demand Response Mode if power is restricted for the product.
12 MAINTENANCE AND SERVICE
12
Indoor Unit
12
Two wired remote controller
12
Call the service immediately in the following situations
13
Operation Tips!
13
Filter
13
When the air conditioner is not going....
14
Troubleshooting Tips! Save time and money!
MFL41032512 2018. 8. 28. 오오 10:28 Page 7
BEFORE USE
7
ENGLISH
BEFORE USE
Preparing for operation
• Contact an installation specialist for installation.
• Use a dedicated circuit.
Usage
• Being exposed to direct airflow for an extended period of time could be hazardous to your
health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
• Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves
or other heating devices.
• Do not use this air conditioner for non-specified special purposes (e.g. preserving precision
devices, food, pets, plants, and art objects). Such usage could damage the items.
Cleaning and maintenance
• Do not touch the metal parts of the unit when removing the filter. Injuries can occur when
handling sharp metal edges.
• Do not use water to clean inside the air conditioner. Exposure to water can destroy the
insulation, leading to possible electric shock.
• When cleaning the unit, first make sure that the power and breaker are turned off. The fan
rotates at a very high speed during operation. There is a possibility of injury if the unit’s power
is accidentally triggered on while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
OPERATING TEMPERATURE - Inverter Model
COOLING MODE
INDOOR [°C DB]
MIN.
18
MAX.
32
MIN.
-15
OUTDOOR [°C DB]
MAX.
48
HEATING MODE
INDOOR [°C WB]
MIN.
16
MAX.
30
OUTDOOR [°C WB]
MIN.
MAX.
-18
18
MFL41032512 2018. 8. 28. 오오 10:28 Page 8
8
PRODUCT INTRODUCTION
ENGLISH
PRODUCT INTRODUCTION
Name of Components
1
4
Air intake
vents
6
2
5
Air outlet
vents
AUTO INDOOR
ZONE 1
ZONE 1
ZONE 2
REMO
ZONE 3
AUTO INDOOR
REMO
ZONE 2
ZONE 3
ZONE 4
2TH
ZONE 4
Wired Remote
Controller
3
7
8
1 : Indoor unit
2 : Outdoor unit
3 : Wired Remote Controller (Accessory)
4 : Air intake
5 : Air outlet
6 : Refrigerant pipe, Communication cable
7 : Drainage pipe
8 : Earth cable
*The shape of products will vary depending on the model capacity and type.
MFL41032512 2018. 8. 28. 오오 10:28 Page 9
PRODUCT INTRODUCTION
9
ENGLISH
Deluxe wired remote controller (Accessory)
1
11
12
13
14
15
16
17
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
Operation display panel
Mode selection button
Fan speed button
Clock setting / Zone1 button
Simple timer / Zone2 button
Special function setting /Date selection /
Zone5 button
7 Sensor selection / Hour. Minute / Zone6
button
8 Timer mode button
9 Weekly timer1 / Zone3 button
18
10 Test run / On/Off button for reservation /
11
12
13
14
15
16
17
18
Zone7 button
Temperature control button
On/Off button
Room temperature button
Zone selection
Key lock button
Weekly timer2 / Zone4 button
Address / Cancel for reservation button
E.S.P / Setting for reservation / Zone8
button
※ Refer to remote controller manual for detail.
Each function will be shown on the display panel for three second or so when the initial
power is on.
The analog panel enables you to use the remote controller with touch of your finger.
However, if you press more than one button at the same time, it may cause malfunction.
MFL41032512 2018. 8. 28. 오오 10:28 Page 10
10 PRODUCT INTRODUCTION
ENGLISH
RS2 Standard remote controller (Accessory)
1
8
7
9
14
2
10
11
12
4
5
13
6
15
3
1
2
3
4
5
6
OPERATION INDICATION SCREEN
SET TEMPERATURE Button
FAN SPEED Button
ON/OFF Button
OPRATION MODE SELECTION Button
WIRELESS REMOTE CONTROLLER
RECEIVER
• Some products don't receive the wireless
signals.
7 AIR FLOW Button
8 SUBFUNCTION Button
9 FUNCTION SETTING Button
10 VENTILATION Button
11 RESERVATION
12 UP,DOWN,LEFT,RIGHT Button
• To check the indoor temperature, press
button.
Please attach the inform label inside of the door.
Please choose proper language depend on your
country.
13 ROOM TEMPERATURE Button
14 SETTING/CANCEL Button
15 EXIT Button
* Some functions may not be operated and
displayed depending on the product type.
!
NOTE
• Display temperature can be different from
actual room temperature if the remote
controller is installed at the place where
sun-rays are falling directly or the place
nearby heat source.
• The actual product can be different from
above contents depending upon model
type.
• When using simultaneous operation
system, whenever press remote controller
button, system will approximately operate
after 1~2 minutes.
MFL41032512 2018. 8. 28. 오오 10:28 Page 11
PRODUCT INTRODUCTION
It is the function to display Demand Response Mode if power is restricted for the product.
• This function works only when DRED (Demand response enabling device) is installed.
• It may decrease capacity of air conditioner in DRM.
• This air conditioner is capable of DRM1, DRM2 and DRM3 and complies with standard
AS/NZS 4755.3.1.
While Demand Response Mode operates, 'dr'
+ mode number blinks on the screen of the
cable remote control according to the Demand
Response Mode.
< Demand Response Mode table>
Mode
Display
DRM 1
dr 01
DRM 2
dr 02
DRM 3
dr 03
- When an error is detected for group control, DRM is not displayed.
- If DRM is displayed, the remaining time of the simple reservation will not be displayed.
ENGLISH
Monitoring – Demand Response Mode(DRM)
11
MFL41032512 2018. 8. 28. 오오 10:28 Page 12
12 MAINTENANCE AND SERVICE
ENGLISH
MAINTENANCE AND SERVICE
Indoor Unit
Grille, Case and Remote Control
- Turn the system off before cleanining, To
clean, wipe with a soft, dry cloth. Do not use
bleach or abrasives.
!
NOTE
Supply power must be disconnected
before cleaning the indoor unit.
Call the service immediately in
the following situations
- Anything abnormal such as burning smell,
loud noise etc. happen. Stop the unit and
turn the breaker off. Never try to repair by
yourself or restart the system in such cases.
- Main power cord is too hot or damaged.
- Error code is generated by self diagnosis.
- Water leaks from indoor unit.
- Any switch, breaker (safety, earth) or fuse
fails to work properly
User must carry routine checkup & cleaning to
avoid unit’s poor performance.
In case of special situation, the job must be
carried out by the only service person.
Air outlet vent
Two wired remote controller
- All wired remote controllers are displayed on
identical information.
- Last used wired romote controller has
priority on product's movement.
MFL41032512 2018. 8. 28. 오오 10:28 Page 13
MAINTENANCE AND SERVICE 13
Do not overcool the room.
This is not good for the health and wastes
electricity.
Keep blinds or curtains closed.
Do not let direct sunshine enter the room
when the air conditioner is in cooling
operation.
Make sure that the doors
and windows are shut tight.
Avoid opening doors and windows as much as
possible to keep the air conditioned air in the
room.
Ventilate the room occasionally.
Since windows are kept closed, it is a good
idea to open them and ventilate the room from
time to time.
Filter
The units shipped without a filter and is the
responsibility of the installer to secure a filter
in the return air ductwork.
Filter must always be used and must be kept
clean.
When filters become dirt laden, insufficient air
will be delivered by the blower, decreasing
your units efficiency and increasing operating
costs and wear-and-tear on the units and
controls.
Filters should be checked monthly especially
since the unit may be used for both heating
and cooling
When the air conditioner is
not going....
When it is not going to be used for a
long time.
- Operate the air conditioner on Air circulation
mode for 2 to 3 hours.
This will dry out the internal parts.
- Turn off the circuit breaker.
! CAUTION
Turn off the circuit breaker when the air
conditioner is not going to be used for a
long time.
Dirt may collect and may cause a fire.
When the air conditioner is to be
used again.
- Check that the air inlet and outlet of the
indoor/outdoor unit are not blocked.
ENGLISH
Operation Tips!
MFL41032512 2018. 8. 28. 오오 10:28 Page 14
14 MAINTENANCE AND SERVICE
ENGLISH
Troubleshooting Tips! Save time and money!
Check the following points before requesting repairs or service.... If the malfunction persist,
please contact your dealer.
The air conditioner
does not operate.
- Have you made a
mistake in timer
operation?
- On first starting, the
indoor unit operates
in fifteen seconds.
- Has the fuse blown
or has the circuit
breaker been
tripped?
The room has a
peculiar odor.
- Check that this is not
a damp smell
exuded by the walls,
carpet, furniture or
cloth items in the
room.
It seems that
condensation is
leaking from the air
conditioner.
- Condensation occurs
when the airflow
from the air
conditioner cools the
warm room air.
Does not cool or heat
effectively.
- Is the air filter dirty?
See air filter cleaning
instructions.
- The room may have
been very hot when
the room air
conditioner was first
turned on. Allow
time for it to cool
down.
- Has the temperature
been set incorrectly?
- Are the indoor unit's
air inlet or outlet
vents obstructed?
The air conditioner
Crack sound is heard.
operation is noisy.
- This sound is
- For a noise that
generated by the
sounds like water
expansion/contractio
flowing.
n of the inlet grille,
etc. due to changes
* This is the sound
of temperature.
of freon flowing
inside the air
conditioner unit.
- For a noise that
sounds like the
compressed air
releasing into
atmosphere.
* This is the sound of
the dehumidifying
water being
processed inside the
air conditioning unit.
Air conditioner does
not operate for about
3 minutes when
restart.
- This is the protector
of the mechanism.
- Wait about three
minutes and
operation will begin.
Remote control
display is faint, or no
display at all.
- Has the circuit
breaker been
tripped?
MFL41032512 2018. 8. 28. 오오 10:30 Page 15
15
ENGLISH
MFL41032512 2018. 8. 28. 오오 10:28 Page 100