LG DC593W Owner's Manual

DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DC593W
PAL
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
Safety
Precautions
WARNING
Notes
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
shock to persons.
on
copyrights:
It is forbidden
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs.
This
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
The exclamation mark within
is intended to alert the
user
an
equilateral triangle
to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
?
Complete versatility
Tapes.
?
Watch
?
?
To
Digital Video Disc Player employs
ensure
proper
use
of this
Laser
System.
product, please read this owner 's
a
carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
manual
Use of controls,
other than those
adjustments or the performance of procedures
specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
dripping
such
2
as
apparatus shall not be exposed to water,
splashing and that no objects filled with liquids,
vases, shall be placed on the apparatus.
or
a
DVD while
to
play DVD, VCDs, audio CDs
recording
a
or
VHS
TV show to the VCR.
Remote controls both DVD and VCR decks.
Records from DVD to VHS
with
CAUTION:
___________________________________
___________________________________
Features:
?
This
to
Macrovision).
Hi-Fi Stereo VCR.
(unless
DVD is copy
protected
Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
26
Programmed Playback with CD and Video CD.
26
Programmed Playback with CD and Video CD
.26
RepeatProgrammedTracks
.26
ErasingaTrackfromProgrammenu.
26
Erasing the Complete Program menu
OperationwithMP3Disc.................27-28
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
OperationwithTape.....................20-22
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
.20
OPR(OptimumPictureResponse).
.21
InstantTimerRecording(ITR).
22
Timer recording using On Screen Display.
Operation with DVD, Video CD, and Audio CD 23-26
Playingadisc..........................23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ChildLock.............................29
.29
VideoDoctor(Self-Diagnosis).
ez(easy)repeat.........................29
Hi-FiStereoSoundSystem................30
.31
AdditionalOperation-DVDpart.
LastConditionMemory...................31
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSaver...........................31
SpecialRecording.........................32
CopyingfromDVDtoVCR.................32
32
Recording from another video recorder
.
.
.
.
.
.
.
Reference
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Troubleshooting..........................33
LanguageCodeList.......................34
Specification.............................35
.
Operation
.
.
.
Picture.............................17
Sound.............................17
Others (DRC/PBC/Pseudo PAL/Vocal)
18
ParentalControl...................18-19
.
.
.
.
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
10
Important notes on controlling this unit
.11-15
BeforeOperation-VCRpart.
.11
UsingyourVCRveryfirsttime.
.11
TuninginavideochannelonyourTV.
SettingtheclockManually.................12
Tosetthecoloursystem..................12
Howtousingthemainmenu...............13
.13
TuninginTVstationsAutomatically.
.14
TuninginTVstationsManually.
.15
ChangingtheotherofTVstations
DeletingTVstations......................15
.16-19
BeforeOperation-DVDpart.
GeneralExplanation......................16
On-ScreenDisplay.......................16
InitialSettings........................17-19
17
Initial Settings General Operation.
Language..........................17
.
.
PlayinganMP3disc.....................27
.28
ProgrammedPlaybackwithMP3disc
28
Programmed Playback with MP3 disc
To play a programmed MP3 file repeatedly
28
.28
ErasingaTrackfromProgramlist.
.28
ErasingtheCompleteProgramList.
.29-30
AdditionalOperation-VCRpart.
OnScreenDisplay.......................29
TapeCounterMemoryStop................29
.
Connections............................9-10
.
.
NotesonMP3Discs.....................27
.
Preparation
.
About the
symbols
for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
.
.
GeneralFeatures........................23
MovingtoanotherTITLE...............23
23
Moving to another CHAPTER/TRACK
.
.
.
.
.
SlowMotion.........................23
24
Still Picture and Frame-by-Frame Playback
Search.............................24
.
.
.
.
Repeat............................24
RepeatA-B.........................24
TimeSearch........................24
Zoom..............................24
3DSurround........................25
MarkerSearch.......................25
Randomplay........................25
SpecialDVDFeatures....................25
TitleMenu..........................25
DiscMenu..........................25
CameraAngle.......................26
.26
ChangingtheAudioLanguage.
.
.
.
.
.
.
.
.
.
Subtitles...........................26
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
Chapter (DVD only)
Sections of a picture
Audio CD
(8cm/12cmdisc)
In addition, this unit
can
or
play
a
CD-R
or
Depending
CD-RW that
MP3 files and SVCD also.
on
the conditions of the
ment or the CD-R/RW disc
discs cannot be
--
The unit cannot
no
data,
or
itself,
recording equip-
some
played on the unit.
play the CD-R/RW
feature content
or a
musical
piece
that
are
smaller
than titles.
Notes
--
accompanying
or
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Video CD
contains audio titles
(DVD only)
DVD
CD-R/RW
A title is
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
is
chapter
Track
(Video
Sections of
discs that contain
contain different kinds of formatted data
a
CD and audio CD
picture
or a
audio CD. Each track is
or an
enabling
only)
piece
assigned
musical
on a
a
video CD
track number,
you to locate the track you want.
other than MP3 and CD-DA data.
--
--
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
(the
irregular shaped CDs (e.g., heart-shaped
octagonal). It may result in malfunctions.
Do not
or
use
Notes
Some
on
DVDs and Video CDs
playback operations
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content
some
Scene
designed by the software manufacturer,
playback features of the unit may not be avail-
or other functions may be added.
Refer also to the instructions applied with the DVDs and
able,
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
Types
There
of video CDs
are
two
types of video CDs:
Video CDs
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
code of the DVD player and DVDs
player is designed and manufactured
3
for playback of region "3" encoded DVD software. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled "3" or "ALL". If you
try to play any other discs, the message "Check Regional
Regional
This DVD
Code" will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback
4
is
prohibited by
area
limits.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Cont'd)
Precautions
Storing
After
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
When
the unit
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
contact with the unit for a
leave marks
such
as
on
long period
Cleaning
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
are
moistened with
lightly
solution. Do not
benzine,
light, as there may be a considerable temperature
increase inside the car.
insecticide spray,
To clean the cabinet
a
store the disc in its case.
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the surface clean
use
the unit. Do not leave rubber of
use a
discs
a
extremely dirty,
detergent
mild
strong solvents, such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
MP3
Audio CDs.
MP3 disc.
5
INTRODUC
Front Panel and
Window
Display
Tape Eject
Pause
PAUSE( /
)
playback temporarily / press repeatedly
for frame-by-frame playback.
STOP(A)
Stops playback.
Forward
Skip/Scan,
Fast-Forward
(
)
chapter/track.
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
Winds the tape forwards.
PLAY
DVD OPEN/CLOSE
Opens
or
)
closes the disc tray.
Disc
Insert
(
a
Starts
Reverse
Tray
Go to
disc here.
Skip/Scan,
beginning of
or
to
Rewind
(
)
chapter/track
PREVIOUS chapter/track.
current
Press and hold for two seconds for
POWER
reverse
Switches the unit to
ON
or
( G)
playback.
a
fast
search
Rewinds the tape.
OFF.
Tape Compartment
EJECT
OPEN/
CLOSE
VIDEO 2
COPY
POWER
L-AUDIO2-R
REC/ITR
PROG.
DVD/VHS
Audio IN
(L/R)
TITLE
window
VCR Record
Shows the current
Channel
status of the unit.
DVD/VHS
Jacks
Copy
Point the remote control here.
Button
Indicates current title number
Programmed playback
CHP/TRK
Indicates current
A timer
VCR
MP3 disc inserted
is
engaged
playing time/elapsed
Child Lock is
mode
The Hi-Fi track of
DVD inserted
The VCR Record
Speed
video is
or
broadcast in stereo
AB
PROG. TITLE
CHP/TRK
VCR
TIMER
REC
CDREC
HI-FI
ALL MP3
VCD
DVD
ST
6
VHS
Cassette-In indicator
The current TV
or
a
tape is playing
VCD Video CD inserted
show
time
engaged
DVD to VHS copy is in progress
Indicates repeat mode
CD Audio CD inserted
DVD
recording
Indicates total
ANGLE active
Bilingual
chapter or track number
engaged
recording is programmed or in progress
VCR's internal tuner is
active
Channel programme
MP3
Programme Selectors
Remote Sensor
Selector
DVD to VHS
PROG.
Display
Indicator
Video IN Jack
BIL
PR
SP
LP
LP
is set to SP
Remote Control
DVD/VHS select button
Selects
operational
OPEN/CLOSE
EJECT
Open or close the the disc
mode of remote
control.
POWER
Switch this unit ON
OUTPUT SELECT
TV/VCR
POWER
TV/VCR
DISPLAY
CLK/CNT
Access the On-Screen Display.
or
DVD
CLK/CNT
SETUP
/ i
SETUP/ i
setup
the title
menu
DISC MENU
Select input
into tape.
SELECT
ENTER
AV
REC/ITR
Record your
REC/ITR
TITLE PAUSE/STEP STOP
?
PLAY
)
FORWARD
PROGRAM
PLAY
?
AUDIO SUBTITLE MARKER
-
SEARCH
a
subtitle
REPEAT RANDOM
?
to
A-B
-
MARKER SEARCH
REPEAT CM SKIP
*
LP
camera
angle
-
?
-
?
?
REPEAT/ez REPEAT
-
?
-
Remove the setup menu.
Displays the menu of a video CD
with PBC.
-
-
?
-
-
on
Repeat chapter, track, title,
ez
all.
REPEAT
A-B/LP
CHILD LOCK
Switch the Child Lock
Rewinds the tape.
Press and hold button for about
two seconds.
PROGRAM
Access or remove program menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
if available
RETURN
beginning
chapter or track or go
previous chapter or track.
?
menu.
ANGLE
Select DVD
ez
point during playback.
SEARCH
)/
of current
language.
MARKER
Mark any
(G)
playback.
Reverse SKIP/SCAN (
Rewind
Search backward* / go to
a menu.
SUBTITLE
Display
C.LOCK ANGLE RETURN ZOOM
language (DVD) or
audio channel (CD).
Select
into tape.
?
audio
an
sources
Winds the tape forwards.
-
an
recording
Press and hold button for about
two seconds.
Starts
0-9 numerical buttons
Select
input
for
Forward SKIP/SCAN (
)/
Fast Forward
Search forward* / go to next
chapter or track.
-
CLEAR
playback temporarily / press
repeatedly for frame-by-frame
playback.
STOP(A)?
Stops playback.
AUDIO
source
*
?
Pause
Select numbered items in
DVD disc.
-
available.
(
a
-
BACKWARD
?
of the disc if
PAUSE/STEP
sources
SELECT/ENTER/OK
Acknowledge menu selection.
menu.
TITLE
Display
DISC MENU
Access menu of
OK
Select an item in the menu
Select channel programme of VCR.
or remove
of your output
AV
counter.
-
Access
one
to view on the TV screen.
OUTPUT
SELECT
VHS
DISPLAY
FGDE(left/right/up/down)
-
Select
OPEN/CLOSE
EJECT
Switch between your TV's tuner and
the VCR's internal tuner.
Shows you the current time
Tape Eject.
-
OFF.
or
tray.
-
Repeat sequence.
Select the recording
speed
of the
tape.
and off.
?
RANDOM/CM SKIP
Play tracks in random order.
-
-
?
CM SKIP
ZOOM
Enlarge
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
Detach the
AAA AAA
(7 m)
from the front of the
image.
installation
battery
cover on
the
rear
of
the remote control, and insert two R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
battery
video
with
and
About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
AUDIO OUT
Connect to
an
receiver
amplifier,
or
(Left/Right)
stereo
system.
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
AERIAL
Connect the aerial
AUDIO OUT L/R
Connect to
an
(Both
DVD and VHS
receiver
amplifier,
using
this
or
stereo
jack.
out)
system.
AUDIO IN L/R
Receive the audio
external
(VHS IN 1)
signals from an
source
to VCR.
VHS
DVD/VHS
IN 1
OUT
R
DVD EXCLUSIVE OUT
AERIAL
DIGITAL
COMPONENT
AUDIO
AUDIO OUT
VIDEO OUT
OUT
Pr
R
Pb
L
AUDIO
COAXIAL
L
RF.OUT
VIDEO
DVD/VHS
Y
VIDEO OUT
OUT
AC Power Cord
Connect to
a
power
source.
VIDEO IN
Receive the video
external
VIDEO OUT
(Both
Connect to
a
(VHS IN 1)
signals from an
source
to VCR.
DVD and VHS
TV with video
out)
inputs.
RF.OUT
Connect to your TV
using
this
jack.
COMPONENT VIDEO OUT
Connect to
a
(Y
TV with Y Pb Pr
Pb
Pr)
inputs.
VIDEO OUT
Connect to
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
a
TV with video
inputs.
Connections
DVD exclusive out connection
Tips
Depending
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use only one of the connections described
You
on
below.
Please refer to the manuals of your TV, Stereo
or other devices as necessary to make the
2
best connections.
For better sound
this unit's
reproduction, connect
jacks to the audio in jacks
amplifier, receiver, stereo or
See "Connecting to optional equipment"
on
playback.
jack
on
EXCLUSIVE OUT to the video in
the video cable
Connect the Left and
this unit's DVD
jack
the TV
on
supplied.
Right AUDIO OUT jacks
of
this unit's DVD EXCLUSIVE OUT to the audio left/
right
of your
audio/video equipment.
watch the DVD
Connect the VIDEO OUT
using
System
AUDIO OUT
1
only
can
in
jacks
on
the TV
using
the
audio
supplied
cables.
page 10.
Caution
--
directly to the TV.
input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Make
this unit is connected
sure
Set the TV to the correct video
--
to a TV
Connecting
Make
VHS
DVD/VHS
IN 1
OUT
AERIAL
Basic connection
jack
DVD/VHS OUT to the video in
AUDIO
VIDEO OUT
OUT
Pr
R
Pb
L
L
RF.OUT
VIDEO
Y
DVD/VHS
VIDEO OUT
OUT
on
this unit's
jack
on
the TV
using
supplied.
Connect the Left and
Right AUDIO OUT jacks of
left/right in
using the supplied audio cables.
on
the TV
COMPONENT VIDEO INPUT
Basic connection
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
Connect the
2 TO
TV
jack
supplied
on
the
Video
panel
Input.
(Color
an
Stream
in
Connect the Left and
using
the
supplied
Y
L
R
Rear of TV
) connection
corresponding
jacks
optional Y Pb Pr cable.
the unit to the audio
Pb
of this unit to your
Connect the COMPONENT VIDEO OUT
the unit to the
using
AERIAL
RF antenna cable from the
rear
television's Antenna
Component
(for DVD)
VIDEO
INPUT
AUDIO INPUT
(RF)
Pr
2
COMPONENT
this unit's DVD/VHS OUT to the audio
jacks
1
DIGITAL
AUDIO OUT
(AV)
Connect the VIDEO OUT
the video cable
1
connection)
COAXIAL
on
set TV's INPUT to COMPONENT VIDEO.
2
exclusive out
AUDIO
following connections, depending
the capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT jacks,
1
(DVD
DVD EXCLUSIVE OUT
R
of the
one
Rear of this unit
on
jacks
on
the TV
Right AUDIO OUT jacks of
left/right in jacks on the TV
VHS
DVD/VHS
IN 1
OUT
R
DVD EXCLUSIVE OUT
AERIAL
DIGITAL
COMPONENT
AUDIO
AUDIO OUT
VIDEO OUT
OUT
Pr
R
Pb
L
AUDIO
COAXIAL
L
audio cables.
RF.OUT
VIDEO
DVD/VHS
OUT
Rear of this unit
Y
VIDEO OUT
(Basic connection)
9
PREATION
Connections
Connecting
(Cont'd) / Important
notes on
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with
channel analog stereo or Dolby Surround
two
If the audio format of the
the
capabilities of
produce a strong,
Connect the Left and
Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the supplied audio
this unit
controlling
--
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the On-
Screen
Display,
press AUDIO.
cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
1
Connect this unit's DIGITAL AUDIO OUT
(COAXIAL) to
amplifier. Use
the
an
jack
corresponding in jack on your
optional coaxial audio cable.
Important
2 (See "Digital
Audio
Output"
on
This unit
A
digital multi-channel
sound quality. For this
connection
provides
supported by your unit (MPEG 2, Dolby
DTS). Check the receiver manual and the
1
front of the receiver.
Warning:
Due to the DTS
Licensing agreement, the digital output
DTS digital out when DTS audio stream is
selected.
Press the POWER button
front
2
in
panel
on
the remote control
VHS
DVD/VHS
IN 1
OUT
DVD Button
Press DVD button
on
the remote control when you
The DVD indicator will
display
3
light
on
the front
panel
to show that the DVD is selected.
VHS Button
Press the VHS button
on
the remote control when
you want to control the VCR.
The VHS indicator will light on the front
panel
to show that the VCR is selected.
DVD/VCR
Toggle
4 Press the DVD/VHS
SELECT button
panel
to
toggle
on
the front
control between the DVD and the
OUTPUT SELECT Button
5 Select
DVD EXCLUSIVE OUT
R
AERIAL
DIGITAL
COMPONENT
AUDIO
AUDIO OUT
VIDEO OUT
OUT
Pr
R
Pb
L
AUDIO
COAXIAL
L
RF.OUT
VIDEO
Y
DVD/VHS
VIDEO OUT
OUT
analog
stereo
or
Dolby
Surround connection.
DVD exclusive out
Both DVD and
VCR out
Digital
multi-channel
connection
L
R
AUDIO INPUT
Amplifier (Receiver)
or
to turn on this unit.
VCR.
Rear of this unit
10
operate both DVD
POWER Button
display
2 channel
set of controls to
following buttons are helpful
successfully controlling each part.
the best
audio formats
will be in
this
want to control the DVD.
you need a multi-channel
Audio/Video receiver that supports one or more of the
Digital and
logos on the
uses one
and VCR. The
Multi-channel sound
Digital
controlling
unit
You will need to activate this unit's
digital output.
page 17).
notes on
COAXIAL
DIGITAL INPUT
TV
one
screen.
of your output
sources
to view on the
Before
Operation
-
VCR part
Using your VCR very first
time
Following picture will display on the TV screen
when you have just connected your video recorder
3
TV stations,
tuning
3 to 4
shown "ACMS"
as
picture
is
sharp
and the sound is clear.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is already pre-tuned for
for the very first time.
To make
Tune this channel until the video
please follow stages
(see p.13).
optimum
video
playback
your TV.
on
Store this channel
4 You
on your TV.
will need to look at the TV instruction book if
you do not know how to do this.
5
ACMS
8 if you cannot obtain
carry out stages 5
clear video playback as described in stages 1
4.
Only
~
~
Select
Pr-12
a
sure
POWER
a
which you wish to
watch video's.
Make
in
on
OKi
ACMS
Tuning
TV channel number
video channel
on
be
your TV
6
Notes
that your VCR is in standby pressing
the remote control (only the clock will
on
displayed).
Press PROG. 3
more
or 4 on
the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
following picture will be displayed on the TV
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
The
screen.
already used by another TV station, or if the
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
8
will show you how to change the output
frequency of your VCR.
Your TV receives signals from the video
recorder (VCR) like another TV station. You
is
~
your TV
so that you may watch video
tapes. If you have used AUDIO and VIDEO
cables then your TV should already have a
have to select
a
channel number
RF
dedicated video channel built into it,
called AV.
7
VCR
usually
that you have correctly installed your
described earlier in this book.
sure
as
Press POWER to turn
Turn
2
on
Insert
a
on
36
i
8
Press PROG. 3
your VCR.
your TV.
or 4
to select another video channel.
You may select any channel number between 22
and 68.
Select
a
TV channel number
on
which you wish to
watch video's.
POWER
Press
1
:
on
and tune it in
Make
CHANNEL
PR
on
the front of your VCR when
you have finished.
Tune this channel
so
that
a
bright
blue
screen
appears.
Store this channel
video tape into your VCR
the remote control.
on
your TV.
pre-recorded
and press PLAY on
Select a TV channel number
on
which you wish to
watch video's.
Notes
Don't worry if you don't have a video-tape to play at
this stage! If you switch your VCR on and continue
stages 3 4, instead of seeing video playback tune
~
your TV until you
see a
bright
blue
screen.
Make
sure
VCR and
that you have correctly installed your
successfully tuned in a dedicated video
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
channel
unable to view and record video
tapes!
11
PREATION
Before
Setting
Operation
the clock
-
VCR part
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
Press i.
1
Press 1
or
1
2 to select TIME DATE.
Press OK.
Press i.
2
The main
3
Press 1
or
Press 3
or 4
menu
will appear
on
the TV
screen.
2 to select the SYSTEM and press OK.
HHMMDDMMYY
--
:.
-
-
--
--
--
---
12
TIME
DATE
2
according
to the COLOUR
i
Use the numbered buttons
to alter the
to select
4 system used.
.
the remote control
on
HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
day of the week will appear
you enter the year.
The
automatically
R
f
O
OFF
AUTO
PAL
MESECAM
SYSE
TEM
AB
C
VCR
OSD
DR
SYSTEM
i
OPR
when
Press 1
5 Press
or
2 to select the RF AUDIO.
3 or 4 to
select
according
to the RF AUDIO
used.
HHMMDDMMYY
8
:.
0010103WED
.
12
TIME
DATE
If you make
3
a
mistake press 1
i
or
2 and enter the
R
4
correct details.
f
O
OFF
SYSE
TEM
AB
C
VCR
OSD
DR
SYSTEM
i
Press i.
6
12
RF I/I
RF B/G
RF D/K
OPR
Press i to
remove
the
menus
from the TV
screen.
Before
How to
Operation
VCR part
-
the main
using
Tuning
menu
This VCR
menus
The
can easily be programmed by using
displayed on screen.
menus are
the
2
controlled from the Remote
please
Switch on your TV set and video recorder
the POWER button.
by pressing
will appear
menu
on
the TV
is weak your VCR may
signal
screen.
turn to the MANUAL TUNING section
on
page 14.
1
Press i button.
The main
If the TV broadcast
Automatically
not detect the necessary information and will be
and to store them correctly. To overcome this problem
Control Handset.
1
in TV Stations
2
Press POWER to turn
your VCR.
on
Press i button.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
12
Pr-12
PR
REC
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
DR
fOSD
ON
OFF
REC
REC
OKi
OPR
AB
C
12
Timer
recording setting (see p. 22).
PR Manual tuning setting (see p. 14).
ACMS ACMS (Automatic Channel Memory
System) (see p. 13).
TIME DATE Date & clock setting (see p. 12).
SYSTEM To set the Colour TV System
(see p. 12).
-
Pr-12
REC
PR
ACMS
TIME
DATE
SYSTEM
OSD
VCR
DR
Pr-12
ACMS
fOSD
ON
OFF
-
OPR
OKi
-
-
O
-
RF AUDIO
-
To select the channel of audio output
according to your TV type ("I/I" for
ACMS
Pr-12
OKi
ACMS
PAL I/I TV, "B/G" for PAL B/G TV,
"D/K" for PAL D/K
O
ABC OSD
-
To
change
the
TV) (see p. 12).
language setting for
OSD.
You
can select the language among
English, Russian, Deutsch, Francais,
3
Press OK
again
and Polski.
O
DR
-
To check
a
problem
tuning
with your VCR
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
(see
O
O
p. 29).
F.OSD ON/OFF To
to start the automatic
process.
-
OPR
-
display
the
operational
mode of your VCR (see p.
To improve the playback picture
(see
p.
29).
S
E
Pr-12
i
ACMS
20).
3
Press 1 and 2 to select the desired
4
Press "i" to return to
Press OK and press 3
a
or 4
TV
menu.
to select.
picture.
The TV STATION TABLE will appear when
4 is complete.
Press i to
save
your
settings.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PR
tuning
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
13
PREATION
Before
Tuning
In certain
Operation
VCR part
-
in TV Stations
areas
of the country broadcast
will
4 Searching
Press
Manually
stop when it locates
a
station.
2 to select MFT.
signals
Press 3
or 4
to
adjust.
may be too weak for your VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually
1
in order for your VCR to store them.
CH
MFT
C10
00
STATION
CHANNEL/CABLE
Press i.
AV
:
i
PR
The main
Press 1
PR
09
will appear on the TV
2 to select the PR.
menu
or
screen.
Press 2 to select STATION
5 your
Press OK.
that you may
so
name
TV station.
Press OK.
PR
12
Pr-12
REC
PR
ACMS
TIME
DATE
SYSTEM
C09
AB
C
VCR
OSD
DR
fOSD
ON
OFF
CH
MFT
C10
00
STATION
-
PR
OKi
OPR
OK i
PR
PR
CH
MFT
STATION
01
C02
00
PR-01
6
Press 3
new
Press 1
CHANNEL/CABLE
:
or
to select letters and numbers for the
name.
2 to
move
back and forth between
characters.
AV
i
PR
2
or 4
station
Press OK.
Press i.
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune
(for example,
PR
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PR
C09
7
PR-08
:
DELETE
:
,
(Standard stations)
or
S
(Cable stations):
-
TV2
OK i
TV station has
new
C70, S01
-
S41.
If you wish to
1
7.
stages
placement.
been tuned into your
now
manually
09
10
to find the
14
required
station.
11
12
13
15
16
PR
PR
CH
09
C--
MFT
--
STATION
-----
CHANNEL/CABLE
PR
:
AV
i
tune other stations
-
Enter the channel number of station that you want
to tune with the numbered buttons or use 3 or 4
14
STATION
00
VCR.
Press AV to select C
C02
MFT
Press i, confirm the station
Press i again.
Your
OKi
Press OK.
3
CH
C10
PR
PR-07
MOVE
PR
09).
C10
TV2
00
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
OKi
repeat
Before
Operation
Changing
-
VCR part
the order of TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them against! The instructions
given on this page will show you how you can simply
move them into your desired order.
1
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR.
Press OK.
TV Stations
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR.
Press OK.
AB
C
12
Pr-12
REC
12
Pr-12
REC
PR
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
DR
SYS-
VCR
DR
OSD
TEM
OKi
OPR
OKi
OPR
PR
PR
TIME
DATE
PR
ON
OFF
PR
01
ACMS
fOSD
fOSD
ON
OFF
PR
CH
MFT
STATION
C02
00
PR-01
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
CHANNEL/CABLE
:
:
AV
AV
i
PR
i
PR
2
Press i.
Press 3
2
to select the programme number
you want to move (for example, PR 03).
Press 2.
or 4
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
07
C08
00
08
C09
00
PR
01
Press i.
Press 3
or 4 to select the programme number
you want to delete. (for example, PR 03)
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
00
PR-02
PR-03
PR-04
04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PR-06
PR-07
PR
PR-07
PR-08
MOVE
:
DELETE
:
:
DELETE
:
,
OKi
Press 1.
After a short while, the selected station will be
deleted.
C02
00
02
C03
00
PR-01
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
06
C06
C07
00
00
PR-05
PR-06
01
C02
00
PR-01
02
C03
00
07
C08
00
PR-07
03
00
08
C09
00
PR-08
04
C05
C06
00
PR-02
PR-03
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
OKi
PR
PR-08
MOVE
or 4 to select the programme number
you want to move to (for example, PR 05).
C02
00
PR-01
02
C03
00
03
C05
C06
00
PR-02
PR-04
04
00
PR-05
05
C04
00
PR-03
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
4
stages
1
-
-
01
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PR
OKi
,
3.
01
C02
00
PR-01
02
C03
C06
00
03
00
PR-02
PR-03
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
Press OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
:
:
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
OKi
PR
DELETE
PR
Press 3
01
4
OKi
,
PR-08
MOVE
3
3
PREATION
screen.
MOVE:
PR
How to
selecting
DELETE
:
,
OKi
Stored TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. 3 or 4 to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
15
Before
General
This manual
Operation
DVD
-
part
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
is not available
on
On-Screen
The
TV
screen.
2
Press 3
or
AB
be
can
highlighted.
the
change
The number buttons
numbers
(e.g.,
A-B
title
setting
of
an
number).
For
Video CDs
(non-PBC
only)
Video CDs
only)
play
from this
prohibited
or
point
not available
some
press SELECT/ENTER to execute the
Some discs may not
Screen Display.
provide
all of the below On-
If no button is pressed
Display disappears.
for 10 seconds, the On-Screen
item.
be also be used for
can
(non-PBC
Notes
during playback.
Press 1
3
Repeat
Action
4 to select an item.
2 to
Repeat
All Tracks
Resume
displayed on the
changed on the menu.
The selected item will be
or
Track
Repeat Off
OFF
display operation
Press DISPLAY
1
ALL
Repeat
status can be
Some items
On-screen
TRACK
Display
Title
Repeat Chapter
CHAPT
the disc.
general playback
Repeat
TITLE
this unit. Some DVDs
or
Feedback Field Icons
Temporary
Explanation
setting
functions,
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Shows the current title number
Title Number
1
Chapter
Number
and
0:16:57
Audio language
and Digital Audio
1
ENG
D
6CH
mode
Subtitle language
OFF
1
Sound
VCD2.0
NORM.
VCD1.1
chapter number
chapter number.
1/2,or
to the desired
search the
Numeric, SELECT/ENTER
elapsed playing time, and
point by the elapsed time directly.
Shows the current audio soundtrack
encoding method, channel
and changes the setting.
language,
number
Shows the current subtitles
language
changes the setting.
angle number
changes the angle number.
Shows the current sound mode
and
1/2,
1/2,
SUBTITLE
Shows the current
and
Numeric, SELECT/ENTER
AUDIO
1/2,
ANGLE
1/2
changes the setting.
Function (Press 3/4 to select desired item)
Track Number
Shows the current track
1
Time
0:16:57
Audio Channel
STER.
NORM.
and
skip
elapsed playing
time
and search the desired audio channel.
change the setting.
mode,
Numeric, SELECT/ENTER
FORWARD
(Display only)
Shows the audio channel
Shows the current sound
Selection Method
1/2,or
number,
to the desired track number.
Shows the
and
16
Numeric,SELECT/ENTER
CD
Items
Sound
skip
1/2,or
to the desired title number.
Shows the
and
Angle
skip
Shows the current
1
Time search
Output
and
Selection Method
1/2,
AUDIO
1/2
Before
Initial
You
Operation (Cont'd)
-
DVD
Picture
Settings
set your own Personal Preferences on this unit.
can
part
TV
Aspect
DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
Initial
1
General
Settings
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen.
Either sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
Operation
Press SETUP.
The setup
menu
appears.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Password
Spanish
TV
Aspect
Menu
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Italian
Language
Disc Audio
Password
Chinese
TV
Polish
Aspect
Menu
Audio
Digital
Output
Language
Hungarian
Russian
Audio
Digital
Other------------
Others
Output
Others
Press 3/4 to select the desired item.
2 The
screen will show the current setting for the
selected item, as well as alternate setting(s).
While the desired item is
selected, press 2, then
3 3/4 select the desired setting.
Press SELECT/ENTER
confirm your
4 selection.
to
to
Some items
Press
5 setup
additional steps.
require
RETURN
SETUP,
or
PLAY to exit the
Original
Other
The
Output
a variety of audio output options.
Set this unit's Digital Audio Output according to the type
of audio system you use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equip-
or
DVD
Dolby Digital decoder).
original language
set for the disc is selected.
To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 34. If you enter the wrong language
code, press CLEAR.
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Password
Spanish
TV
Italian
Aspect
Menu
Language
a 2 channel digital
This unit outputs sounds in the PCM
2ch format when you play a DVD video disc recorded
on the Dolby Digital, MPEG1 or MPEG2 recording
stereo
:
Disc Audio
MPEG decoder.
PCM: Select when connected to
for the disc's Menu, Audio and
language
:
Audio
Each DVD disc has
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder
Language
Select a
Subtitle.
Digital
ment with a
menu.
Language
Disc
Sound
amplifier.
system.
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Rating
Password
TV
Aspect
Menu
Language
Digital
Chinese
Audio
Output
Polish
Digital
Audio
Output
Others
Hungarian
Russian
Other------------
Others
Menu
Select
you
Language
a
see
language for the setup menu. This is the
when you press SETUP.
Disc Audio
Chinese
Disc Subtitle
English
menu
Disc Menu
Rating
Password
TV
Aspect
Menu
Language
Digital
Audio
Output
Others
17
PREATION
Before
Operation (Cont'd)
-
DVD
Others
part
Parental Control
The DRC, PBC, Pseudo PAL, and Vocal
settings
can
be
changed.
Press 3/4 to select the desired item and press
SELECT/ENTER. The setting of the selected item is
changed
between On and Off.
Disc Audio
DRC Off
Disc Subtitle
PBC On
Disc Menu
Pseudo PAL Off
Rating
Vocal On
Language
Digital
Audio
on
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
scenes on
or
to have certain discs
Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
thanks to
8
Disc Subtitle
7
Disc Menu
6
Rating
5
Password
4
quietest ones). Then, you may
lower volume without losing clarity
listen to
a
movie
of sound. Set
DRC to On for this effect.
PBC
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
3
Audio
Output
Unlock
Others
1
Select
setup
menu.
2
While
"Rating"
3
Select
"Rating" using
is
the 3/4 buttons
selected, press
on
the
2.
a rating from 1 to 8 using the 3/4 buttons.
(1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
One
Unlock: If you select Unlock, Parental Control is
play in full.
not active. The disc will
Ratings
Pseudo PAL On/Off
On: A NTSC DVD disc
can
be
system TV set, depending
played back
on
Off: A NTSC DVD disc cannot be
with the PAL colour
the disc.
played back
with the PAL
colour system TV set.
unless
lower
Set Vocal to On
only
DVD is
The karaoke channels
playing.
a
rated
played. Higher
will
when
1 to 8: Some discs contain scenes not
suitable for children. If you set
all disc scenes with the same
an
alternative
a rating for the player,
rating or lower will be
will not be played
scenes
scene
is available
The alternative must have the
Vocal
mix into
scenes.
1
technology. However,
dynamic range of the
and the
Set
are
2
Language
Digital
audio
digital
Aspect
Menu
you may wish to compress the
audio output (the difference between the loudest sounds
at a
with alternative
played
Disc Audio
TV
possible,
rated
scenes are
Output
Others
Dynamic Range
the disc. These
country dependent. The Parental Control feature allows
you to prevent discs from being played by your children
Aspect
Menu
DVD
Movies
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
Password
TV
Rating
a
multi-channel karaoke
normal stereo sound.
on
the disc will
one.
If
no
stop. You
change
the
same
on
rating
the disc.
or a
suitable alternative is found,
playback
4-digit password or
order to play the disc.
must enter the
rating
level in
Press SELECT/ENTER to confirm your rating
then press SETUP to exit the menu.
4 selection,
Note
When you have already entered a password;
Enter 4-digit password using the numerical buttons
to confirm the
personal 4-digit security password,
then press SELECT/ENTER.
18
Before
Setting
Operation (Cont'd)
password (DVD only)
your
-
DVD
DVD
If you
enter
change the rating level to "7" or lower, you must
a 4-digit "password" to prevent playback of discs
with higher ratings.
Select "Password" using the 3/4 buttons on
1
the
menu, then press 2.
setup
Disc Subtitle
To clear your
------------
4-digit password
If you
forget your password,
password, follow the procedure
At the SETUP
1
2
NEW
Disc Audio
part
Press
4
Enter
6-digit
to select "Password" item.
number "210499" and then press
SELECT/ENTER.
Rating
The
Password
clear the current
screen
Disc Menu
TV
to
below.
4-digit password is cleared.
Aspect
Menu
3
Language
Digital
Audio
Enter
a new
Refer to
Output
password
"Setting
your
password" section
on
the left.
Others
2 Input
a
4-digit password
and press
SELECT/ENTER.
Example : 1234
Do not forget your password.
3 Input
the
4-digit password again
verify.
and press
SELECT/ENTER to
Setting
is finished.
The
rating is locked. Any discs whose rating is higher
setting cannot be played back unless the
correct password is entered.
than the
To
1
change/clear
memorized
password
At the SETUP screen, press
"Password" and press 2.
2 Input
password
your
4
to select
and press SELECT/ENTER.
Disc Audio
Change
Disc Subtitle
Clear
Disc Menu
Rating
Password
TV
Aspect
Menu
Language
Digital
Audio
Output
Others
3
To
clear your password, press 3/4 to
or "Clear" and press
SELECT/ENTER.
change
or
select the
"Change"
To
the
change
steps
on
rating level/password,
again.
follow the
page 18-19
19
PREATION
with
Operation
Playing
You will
a
only
tape
Press STOP to end
tape
5 Press
be able to load and
eject video
tapes (on PAL TV).
better
Getting
a
cassette is inserted and
picture
playback started,
the
automatic
tracking function works to get the best
picture automatically. If the quality of the
possible
recording
is poor,
remote control to
repeatedly press 3 or 4 on
manually adjust the tracking
the
until
any distortions have been removed. Press numbered
on the remote control to switch automatic tracking
0
back
on
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
When
a
tape is reached, your VCR will stop
playback automatically, rewind, stop, eject the tape.
If the end of the
cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
playback.
EJECT.
again.
normal
playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly
press CM SKIP to
skip:
1 Press 30 seconds
2 Press 60 seconds
3 Press 90 seconds
4 Press
120 seconds
5 Press 150 seconds
6 Press 180 seconds
1
Make
VCR
that you have correctly connected your
described earlier in this book.
sure
as
your TV.
Press POWER to turn
Turn
on your VCR.
Insert the video cassette into your VCR.
The video cassette should have the window side
facing
2
OPR
(Optimum
Picture
Response)
on
up and the
arrow
facing
away from you.
Press PLAY to start
playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the
cassette will start
automatically.
This feature
automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape.
1
Press i.
2
Press 1
3
Press OK.
or
2 to select OPR.
AUTO TRACKING
Your VCR will
give
3
the best
automatically adjust
picture quality.
the
tracking
to
Press PAUSE/STEP to still
Press PAUSE/STEP
a picture.
repeatedly to advance
the
OFF
SOFT
SHARP
R
f
tape frame by frame.
If you hold down FORWARD, the picture will be
AB
C
12
12
MS
TIME
DATE
SYSTEM
OSD
OPR
ON
OFF
VCR
DR
i
OPR
slowed down at about 1/19 times the normal
playback.
Tapes can
be
paused for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
4
picture quality
pressing 3 or 4.
4
can
be
Press PLAY to continue
improved slightly by
playing
your tape.
Picture search:
back press either FORWARD or
BACKWARD to this will enable you to rapidly wind
the tape (7 times normal playback) see where you
During playing
are on
the tape.
Logic search:
During fast forwarding
FORWARD
played
20
or
rewinding press and hold
picture will be
normal playback speed.
or
BACKWARD the
back at 7 times
3
or 4
repeatedly
Please note you may
playing
.
Still
Press
5
to select:
OFF, SOFT
SHARP.
a
only
tape.
Press i return to
screen.
set OPR when
or
Operation
with
Instant Timer
tape
Press LP if you wish to record in
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
5 Standard Play.
recordings using
SP will
a
time
Recording (ITR) start recording
immediately for a set period of time or until the
Your VCR
which
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
1
Make
VCR
when
slight
a
using
loss in
picture
7
Insert
2 VCR.
your VCR.
video cassette with
a
protection
The video cassette should have the window side
facing
up and the
arrow
facing
away from you.
unwanted
recording.
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
8
can
be
Press STOP to end
recording.
Press EJECT.
EJECT will appear
tab into your
recording
scenes.
Tapes
LP.
on
Press PAUSE/STEP to avoid
Press PAUSE/STEP to continue
and
that you have correctly connected your
described earlier in this book.
Press POWER to turn
recording.
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
sure
as
SP.
will appear on the TV screen.
Press REC/ITR several times. Each successive
incorporates Long Play (LP)
quality
as
Press REC/ITR to start
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
sound
produce improved picture and sound quality,
provide twice as much recording
6 RECORD
out.
runs
or
however LP will
Instant Timer
video cassette
Long Play
on
the TV
screen
for
a
few
seconds.
Notes
If you do not wish to record
3
Press 3 or 4 to select the programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
4
If you wish to record directly from the AUDIO L/R
(VHS IN 1)/ VIDEO (VHS IN 1) or AUDIO 2 (L/R)/
VIDEO 2 terminals
repeatedly press AV until the
socket you wish to record from is displayed.
on a tape (this can happen
quite easily by accident!) remove the protection tab on
the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive
tape.
Remember you can
watching another by
record
one
programme while
your instant recording,
press TV/VCR to select TV mode and then selecting a
different channel on your TV.
starting
recording from AUDIO L/R (VHS IN 1)/
(VHS IN 1) terminals on the rear of your
AV 1 for
VIDEO
unit.
AV 2 for
terminals
recording
on
from AUDIO 2
(L/R)/ VIDEO
2
the front of your unit.
21
OPERATION
Operation
with
tape
recording using On Screen
Display
Timer
5
You may set up to seven timer record events within
one month of the current date.
Note
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
1
2
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
Weekly To record at the same time every week.
PR
12
Pr-12
PR
REC
SYS-
TIME
DATE
ACMS
TEM
VCR
OSD
DR
fOSD
ON
OFF
PR
DATE
--
--
--
::
--
--
--
-~
::
--
-~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
DELETE:
--
--
--
--
--
--
--
,
pressing
3
REC
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
--
-~
::
--
--
--
--
--
--
--
--
SP
SP
SP
SP
-~
SP
SP
--
or 4.
DATE
TIME
16
1900
::
2000
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
SP
--
--
--
SP
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
i
SP
SP
SP
SP
7
OK i
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape
or
speed
LP).
PR
PR-01
DATE
TIME
16
19002000
::
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
i
SP
SP
SP
SP
SP
8
SP
SP
i
4
::
--
Press 1 to delete the event.
--
--
PR
replace.
DATE
--
PR-01
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
PR
--
Press the numbered buttons to enter the recording
start and end times of the programme that you wish
to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times by
(SP
3
--
OK i
TIME
--
--
SP
DLYSUMOTUWETHFRSA
OKi
OPR
--
--
6
AB
C
TIME
--
Insert a video cassette with protection tab into your
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
Press i.
Press 1 or 2 to select REC.
Press OK.
DATE
PR-0116--
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then the
channel number; for example Stations 3 03. You
may also select Channels by pressing 3 or 4.
Once selected press 2.
If you wish to record from AUDIO L/R (VHS IN 1)/
VIDEO (VHS IN 1) or AUDIO 2 (L/R)/VIDEO 2 on
the front or from the back of your unit, press AV to
select for correct display (AV1 or AV2).
Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
TIMER will appear in the display window while your
VCR waits to make the recording.
-
-
PR
PR-01
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
change.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme
1 is
programmed
to start at 16:00 and end
Programme
2 is
programmed
to start at 16:30 and end
at 17:00.
at 18:00.
(In
but
this case, Programme 1 will be recorded in its entirety,
only the last 30 minutes of Programme 2 will be
recorded.)
22
Operation
Playing
on
DVD, Video CD, and Audio CD
General Features
disc
a
to
Getting
Turn
with
play
VCD2.0
DVD
Note
VCD1.1
the TV and select the video
input
Unless stated, all operations described are based on
remote control use. Some operations can be carried out
source
connected to this unit.
the setup
using
When you want to enjoy the sound of discs or from
the audio system, turn on the audio system and
select the input source connected to this unit.
menu.
to another TITLE
Moving
DVD
1
1
Press OPEN/CLOSE to open the disc
tray.
When
Load your chosen disc in the
2 facing
tray, with the label
up.
double-sided DVD is inserted, make
the side you want to play is facing up.
When
a
Press OPEN/CLOSE to close the
3 Playback
starts
If
automatically.
Press DISPLAY when
some cases,
the disc
might
menu
DVD
When
VCD1.1
title
a
disc has
The
menu screen
is
may be displayed first after
Video CD which contains a menu.
or
loading
a
DVD
Use the 1/2/3/4 buttons to select the
view, then press
want to
title/chapter you
SELECT/ENTER to start play-
back.
Press TITLE
or
playback
is
to
can move
stopped, then
(0-9) to select
1
CD
DISC MENU to return to the
on a
more
chapter/track
displayed
menu screen
DVD
title, you
1
appear
instead.
When the
one
to another CHAPTER/TRACK
Moving
does not
start, press PLAY.
In
than
more
follows:
as
press the appropriate numerical button
a title number.
sure
tray.
playback
disc has
a
another title
menu
screen.
disc has
than
as
one
than
one
chapter
can move
or a
to another
follows:
Press BACKWARD
or FORWARD
briefly
during playback to select the next chapter/track or to
return to the beginning of the current chapter/track.
Press
twice
briefly
to
step back
to the
previous
chapter/track.
To go directly
to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the
chapter/track
(0-9).
buttons
VCD2.0
more
track, you
number
using
the numerical
Use the number buttons to select the track you want
to view.
Note
Press RETURN to return to the
Menu
setting
For
menu screen.
and the exact
operating procedures
depending on the disc.
the menu may differ
Follow the instructions on the each
using
for
two-digit numbers,
Slow Motion
menu screen.
You also may set PBC to Off under setup. See page
18.
press the buttons in
rapid
succession.
DVD
1 Press BACKWARD
VCD2.0
VCD1.1
FORWARD
or
during
pause.
This unit will enter SLOW mode.
Notes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
--
--
"Parental Control",
DVDs may have a
Your
player
will not
(see
page 18).
region code.
on
play
region
select the
F 1/2
or
FORWARD
to
required speed: F 1/16, F 1/8, F
(backward),
or
G 1/16, G 1/8, G 1/4
1/4
or
or
G 1/2 (forward).
discs that have
different from your unit. The
is 3 (three).
2 Use the BACKWARD
a
region
code
code for this unit
With
a
Video CD, the Slow Motion
changes: G 1/16,
G 1/8, G 1/4 (Forward only)
3 To exit slow motion
mode, press PLAY.
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
23
OPERATION
Operation
with
DVD, Video CD, and Audio CD
General Features
Still Picture and
VCD2.0
DVD
VCD1.1
during playback.
Search
repeatedly
VCD2.0
DVD
VCD1.1
1 Press and hold BACKWARD
for about two seconds
The
player
will
by pressing
the remote control.
on
FORWARD
again
at your chosen end
Time Search
0:16:57
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
play
appears
on
the
CHAPT
VCD1.1
3 Within 10
1 To
-
OFF
the
Repeat Chapter/Title/Off
seconds,
required
4 Within 10
REPEAT.
2 To
Repeat Chapter
icon appears
on
the TV
repeat the title currently playing, press REPEAT
Repeat Title icon appears
on
the TV
on-screen
display.
use
the numerical buttons to enter
start time. Enter
right
hours, minutes and
sec-
in the box.
seconds, press SELECT/ENTER to confirm
the start time.
screen.
a
Playback
starts from the selected time on the disc. If you
time, playback will continue from the current
enter an invalid
second time.
The
elapsed playing time of the
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
repeat the currently playing chapter, press
The
dis-
screen.
seconds, press 3/4 to select the Time
onds from left to
DVD Video Discs
on-screen
at
The "-:--:--" appears in the Time Search box.
CD
ALL
TRACK
TITLE
playing
current disc.
Search icon in the
VCD2.0
The
during playback.
The Time Search box shows the
2 Within 10
mode, press PLAY.
DVD
point.
FORWARD
or
required speed: mX2,
mX4, mX16, mX100 (backward) or MX2,
MX4, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
With a Audio CD, the Search speed changes : MX2
(Forward only)
Repeat
point.
3 To cancel the sequence, press A-B.
to select the
3 To exit SEARCH
title:
during playback.
2 Press and hold BACKWARD
repeatedly
a
briefly on the TV screen, and the repeat
sequence begins(a-b repeat appears on the player's display).
go into SEARCH mode.
now
2 Press A-B
CD
OFF
sequence in
a
VCD1.1
A-B appears
CD
or
VCD2.0
1 Press A-B at your chosen starting
A- appears briefly on the TV screen.
now
PAUSE/STEP
DVD
AB
To repeat
go into PAUSE mode.
advance the picture frame by frame
This unit will
A-B
A*
Frame-by-frame playback
1 Press PAUSE/STEP
2 You can
Repeat
(cont'd)
point.
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
3 To exit
The
Video CDs
1 To
Repeat
repeat the track
The
2 To
-
Track/All/Off
currently playing,
Repeat Track icon appears
on
press REPEAT.
the TV
screen.
repeat the disc currently playing, press REPEAT
second time.
The
Repeat
All icon appears
on
the TV
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
3 To exit
The
Zoom
DVD
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
a
during playback
or
If you press ZOOM repeatedly, the
increases up to two times.
On
a
Video CD with PBC, you must set PBC to Off on
menu to use the Repeat function. See page
the setup
18.
2 Use the 1/2/3/4 buttons to move
zoomed
the
to acti-
through
the
picture.
playback
or
return to
paused image.
Note
The
zoom
scenes.
24
playback
magnification level
3 Press CLEAR to resume normal
Note
still
vate the Zoom function.
function may not work
on
multi-angle
with
Operation
DVD, Video CD, and Audio CD
General Features
3D Surround
DVD
Random
(cont'd)
VCD2.0
VCD1.1
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1 Press DISPLAY
selected.
Marker Search
OPERATION
random.
Random
play (DVD)
1 Press RANDOM during stop.
The DVD player starts random
until the desired sound is
DVD
CD
can playback titles, or tracks in random order.
(Random playback)
The DVD player automatically selects the titles in a
DVD video karaoke disc only and plays them back
during playback.
repeatedly
VCD1.1
You
2 Press 3/4 to select NORM.
3 Press 1/2
DVD
Note
This function only works with karaoke DVD and with
audio CD discs. Random does not work with DVD
movies.
CD
3D SUR
NORM.
play
playback.
If you press RANDOM during normal playback, the
DVD player will randomly select another title and
begin random playback immediately.
1/5
2 To
Random
Maker
Maker
Maker
Picture 1
Picture 2
Picture 3
Maker
Maker
Present
Picture 4
Picture 5
Picture
normal
resume
playback,
play (VCD/CD)
plays the tracks
The player
order.
on
press RANDOM.
the disc in random
1 Press RANDOM
during stop.
playback screen appears
The random
on
the TV
screen.
If you press the RANDOM button during normal
the DVD player immediately selects another
track and begins random playback.
playback,
You can start playback from a memorized
five points can be memorized.
To enter a mark, follow these steps.
1
point. Up
to
During disc playback, press MARKER when
playback reaches the spot that you want to
The Marker icon will appear
Repeat step
on
the TV
screen
1 to enter up to five Marker
disc.
To Recall
1
During
or
disc
clear
a
briefly.
points
on a
playback,
press SEARCH.
menu
will appear
on
the
screen.
2 Press 1/2/3/4 to select a Marker that you want to
recall
or
and starts
Special
playback.
DVD Features
DVD
clear.
3 Press PLAY or SELECT/ENTER to recall a marker.
Or press CLEAR to clear a marker.
Play resumes from the point corresponding to the selected
marker, or the selected marker is cleared.
4 To remove the MARKER SEARCH menu, press PLAY
or
Notes
Random playback may not be possible on certain
discs or VCDs (Version2.0).
If you press the FORWARD
button during random
playback, the DVD player goes to another track
randomly
Marked Scene
The MARKER SEARCH
normal playback, press RANDOM
random playback.
resume
during
memorize.
2
2 To
SELECT/ENTER.
Checking the contents of DVD Video
discs: Menus
DVDs may contain menus that allow you to access
features. To use the disc menu, press DISC
MENU. Then, press the appropriate numerical button to
select an item. Or, use the 1/2/3/4 buttons to highlight
your selection, then press SELECT/ENTER.
special
Title Menu
DVD
1 Press TITLE.
If the current title has a menu, the menu will appear
screen. Otherwise, the disc menu may appear.
on
the
2 The menu can list camera
and subtitle
angles, spoken language
chapters for the title.
menu, press TITLE again.
options,
3 To remove the title
Disc Menu
and
DVD
1 Press DISC MENU.
The disc menu is displayed.
2 To remove the disc menu, press DISC MENU
again.
25
Camera
DVD, Video CD, and Audio CD
with
Operation
DVD
Angle
1
Subtitles
If the disc contains sequences recorded from different
angles, the angle icon blinks on the display. You
camera
can
then
camera angle if you wish.
repeatedly during playback to
to see the
repeatedly during playback
languages.
select
a
Note
The number of the current
1
Press SUBTITLE
different subtitle
angle.
angle appears
the Audio
Changing
ENG
the
change
Press ANGLE
desired
1
DVD
on
the
display.
If
appears, the feature is not available
on
the disc.
DVD
Language
ENG
D
6CH
Press AUDIO
different audio
repeatedly during playback
language or audio track.
Programmed Playback
with
Program allows you to store your favorite
particular disc in the player memory.
Program
1
can
to hear a
CD, and Video CD
tracks for
a
The
during playback
or
in the
stop
mode.
The
Program
menu
Repeat Programmed
To repeat the track
contain 20 tracks.
Press PROGRAM
CD
The
Repeat
1
00:00
All icon appears
Repeat mode,
press REPEAT.
the TV
a
Track from
1 Press PROGRAM
on
the TV
screen.
screen.
press REPEAT
Repeat Off icon appears
Erasing
Step
Total Time
on
To repeat all tracks of program menu, press REPEAT
a second time.
The
Program
Tracks
currently playing,
Repeat Track icon appears
To exit
will appear.
VCD1.1
on
the TV
Program
during playback
a
third time.
screen.
menu
or
in the
stop
mode.
The Program menu will appear.
2 Use 3/4/1/2 to select the track that you wish to erase
from the
Program
menu.
3 Press CLEAR.
Clear All
The track will be erased from the
Program
menu.
4 Press PLAY or SELECT/ENTER.
Erasing
Note
Press PLAY
or
PROGRAM to exit the
Program
menu.
Press 3/4/1/2 and press the numeric
to select the desired track number.
2 to
place
additional tracks
on
the
during playback
The
Program
menu
or
in the
stop
will appear.
2 Use 3/4/1/2 to select "Clear
Press PLAY
or
4 Playback begins
SELECT/ENTER to start.
in the order in which you
programmed
the tracks.
Playback stops after all of the tracks
played
The
All", then press
complete Program for the disc
The programs
menu.
26
1 Press PROGRAM
menu
SELECT/ENTER.
step
3 Repeat
Program
have
Complete Program
mode.
2 button(s),
menu
the
once.
on
the
Program
are
will be erased.
also cleared when the disc is removed.
3 Press PLAY or SELECT/ENTER.
with MP3 Disc
Operation
Notes
on
MP3 Discs
Playing
About MP3
An MP3 file is audio data
compressed by using
The
player
can
".mp3"
player
can
file extension
CD-R
CD-RW discs.
or
play
".mp3".
not read a fake MP3 file that has a
1
Load
an
The MP3
".mp3".
MP3 format
MP3
playing
Recordings on
not read an MP3 file that has a file
extension other than
The
file extension "MP3 files".
MP3 disc
can
Before
MPEG1, the audio layer-3 file-coding scheme. We call
files that have the
an
This unit
recordings
on
CD-ROM,
read the notes of MP3
recordings,
the left.
OPERATION
MP3 disc.
menu
is
displayed.
MP3
Program
ABCD
MP3 disc
compatible
with this
player
is limited
MP3-2
as
follows:
1.
Sampling Frequency / only at 44.1kHz
Bit rate / within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
therefore recommend that you use "Easy-CD
2.
3.
4.
5.
MP3-1
MP3-3
MP3-4
MP3-5
-
Creator", which creates an ISO9660 file system.
A single session disc requires MP3 files in the first
track. If there is
not
playback
MP3 file in the 1st track, it canMP3 files. If you wish to playback MP3
MP3-6
MP3-7
MP3-8
MP3-9
Press 3/4 buttons to select the
2 where MP3 files that you
located and then press SELECT/ENTER.
or use a new
Press 3/4 button to select the desired MP3
3 file of the selected directory
one.
File
and
8.
using CD-RW discs.
finished CD-R discs only.
names should be named using 8 letters
must incorporate ".mp3" extension
We do not recommend
use
7.
e.g. "********.MP3".
Do not use special letters such
]:;\/.,"
9.
as
Please
or
less
"_?!><+*}{`[@
etc.
Total number of files
on
previous
Press SELECT/ENTER
or
4 playback of
10. Use 74 minute CD-R discs
This DVD
(700M)
(650M),
Do not
use
the next file
?
your disc.
menu, press
PLAY to start
file.
?
or
previous
or
Press TITLE to
move
BACKWARD
file
to
play
during playback.
to 1st page of current directo
tory during playback and press TITLE again
80
move
software
?
player requires discs/recordings
a
For your reference
Press FORWARD
the disc should be less than
on
If you want to return to the
the RETURN button.
200.
minute CD-R
directory
play are
want to
no
files, format all the data in the disc
6.
Clear All
to the next page within 5 seconds.
move to the Root Directory
Press MENU to
during
playback.
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
are
optimal
automatically
set to these standards. There are many different
of recordable disc formats
MP3
types
(including CD-R containing
permission
is
required
in order to download MP3 files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright
owner.
play
an
MP3 file
repeatedly
If you press REPEAT button once during
current MP3 file will play repeatedly.
If you press REPEAT button twice
directory will play repeatedly.
files).
Customers should also note that
To
play,
the
during play,
the
If you press REPEAT button three times, the
will be cancelled.
repeat
play
MP3
Prog
MP3
Progra
MP3-1
MP3-1
..
..
TRACK_1
TRACK_1
TRACK_2
TRACK_2
TRACK_3
TRACK_3
TRACK_4
TRACK_4
TRACK_5
TRACK_5
TRACK_6
TRACK_6
TRACK_7
TRACK_7
TRACK_8
TRACK_8
REPEAT
C
symbol
27
Programmed Playback
with MP3 disc
Program allows you to store your favorite
particular disc in the player memory.
Program
can
tracks for
a
1
2
Select
3
Press PROGRAM button to add
an
on
a
programmed
MP3 file
previous
page.
MP3 file to program with 3/4.
once during play, the
play repeatedly.
If you press REPEAT button twice during play, the
MP3 files on the program list will play repeatedly.
If you press REPEAT button three times, the
will be cancelled.
?
?
Up
-
MP3 file to
3 to select another track.
to 60 files can be
MP3
an
Program
TRACK_2
TRACK_2
TRACK_7
TRACK_7
TRACK_6
TRACK_6
TRACK_9
TRACK_9
programmed.
Program
Clear All
Clear All
MP3-1
TRACK_2
..
TRACK_7
TRACK_1
TRACK_6
TRACK_2
TRACK_9
REPEAT
TRACK_3
symbol
TRACK_4
TRACK_5
Erasing
TRACK_6
a
Track from
Program
list
TRACK_7
TRACK_8
Clear All
1 Press 2 to move to the
Program
list.
2 Use 3/4 to select the track that you wish to erase
4
Press 2 button and select the desired MP3 file
and press SELECT/ENTER
or
PLAY button to
from the
Program
list.
3 Press CLEAR.
The track will be erased from the
play.
If you want to enter the main menu, press 1 button.
Erasing
the
Program list.
Complete Program
1 Press 2 to move to the
Program
2 Use 3/4 to select "Clear
List
list.
All", then press
SELECT/ENTER.
The
complete Program for the disc
The programs
28
are
all
repeat
play
Program
the program list.
Repeat steps 2
repeatedly
current MP3 file will
Follow
1 to 2
play
If you press REPEAT button
contain 60 tracks.
steps
To
MP3
will be erased.
also cleared when the disc is removed.
Additional
On Screen
Operation
-
VCR part
Video Doctor
Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
(Self-Diagnosis)
This feature informs you that there is a problem with
error messages will appear on the TV
your VCR. These
screen.
1
OPERATION
Press i.
Press 1
or 2
to select DR.
Press OK.
1
Press CLK/CNT to
Press CLK/CNT
display.
repeatedly
to
cycle through
the
The tape counter and amount of
tape left will appear if there is a tape loaded.
display options.
AB
C
12
Pr-12
REC
majority of the On Screen
leaving only the clock or tape
After 3 seconds the
2 Displays
will clear
counter and the amount of
Press CLK/CNT
the TV
again
tape left
the
on
to remove all
PR
ACMS
TIME
DATE
SYSTEM
OSD
VCR
VCR
DR
DR
fOSD
ON
OFF
OKi
OPR
screen.
displays
from
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS N
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
VCR
Tape Counter Memory Stop
The
Digital Tape
Counter
the relative
positions
of
i
be displayed on the display
by pressing CLK/CNT on
Digital Tape Counter indicates
recordings on the tape.
can
window instead of the time
the remote control. The
OK
DR
2
Press
3 or 4
to check a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
1
Press CLK/CNT.
TAPE STATUS
Press CLEAR to set the counter to 0:00:00.
Press PLAY
or
start
O
recording.
The tape counter will display the actual
hours, minutes and seconds.
play
Press STOP when
playback
or
recording
a
tape with its protection tab in place
NO. OF TIMER PROGRAMME
O
2
NOT RECORDABLE:
Insert
time in
is
complete.
Press BACKWARD.
2Shows
the number of timer
recording.
NEXT TIMER PROGRAMME
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
O
PR-01 26 10:00~11:00
Shows the current status of timer
recording.
Press i.
Child Lock
The control buttons on the front of the VCR can be
switched off so that your VCR can only be operated
using the remote control.
1
Press C.LOCK.
will appear in the display window.
None of the buttons on the front of your VCR will
work.
If any buttons
on
the front of your unit
will flicker in the
display
are
window for
a
ez
By pressing & holding ez REPEAT during play back,
holding section is replayed twice automatically.
1
few
During play back, press
point where repeat play
2
Release
2
will
again to switch off the child
disappear in the display window.
REPEAT at the
ez
ez
REPEAT at the
reverse
point
search.
where repeat
play
is to start.
The
Press C.LOCK
& hold
the
is to be concluded.
Then, your VCR will go into
pressed
seconds.
(easy) repeat
holding
section is
replayed
twice
automatically.
lock.
Note
Pressing
ez
REPEAT
return to normal
again during repeat play,
will
play.
29
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record and
VCR part
-
System
playback
Hi-Fi stereo sound.
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on
your VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks
allow you to make audio recordings in Hi-Fi stereo or
bilingual mode from a TV broadcast, stereo audio system,
video disc or another Hi-Fi VCR.
3
The choice is STEREO, LEFT, RIGHT and MONO.
In BIL playback the primary language is output on
the left channel and the
secondary channel is output
right channel when audio
output is set to STEREO. The primary language will
be output from both channels when the audio setting
simultaneously
from the
is MONO.
Please note that when
adjusting
the
tracking
Hi-Fi stereo sound may revert to MONO.
1
Your VCR's allows you to enjoy broadcasts with
standard stereo, bilingual and mono sound. The
particular type of sound received or that recorded
briefly displayed on the TV screen for a
couple of seconds:
will be
STEREO
Sound is
and
automatically
mono
recorded
the Hi-Fi stereo
on
tracks of the video tape.
BIL
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
2
30
on
the Hi-Fi tracks and the
track of the video tape without any
Press AUDIO
repeatedly
mode appears.
separation.
until the desired audio
control
Additional
Operation-DVD part
Last Condition
Screen Saver
Memory
DVD
The
This unit memorizes the last condition for the last disc
screen saver picture appears when you leave this
unit in stop mode for about five minutes.
you have watched. Settings remain in memory even if
you remove the disc from this unit or switch off this unit. If
OPERATION
you load
a disc that has its settings memorized, the latest
stop position is automatically recalled.
Load the DVD that
1
memorized.
was
It will appear on the TV
If the screen is left for
?
screen as
playback will start
automatically.
more
from the
below.
than 10 seconds,
of the title
beginning
Resume disc from
last
position?
1.No
2
2.Yes
Press 1/2 to select "YES" and press
SELECT/ENTER.
The memorized
settings
are
automatically
recalled.
Notes
stored in memory for use any time.
settings for up to 1 DVD in memory. If
Settings
are
You
store
can
you memorize settings for more than 1 DVD previously
memorized settings are erased in order from the last
recently
memorized
settings. Subsequently,
if you
try
to call up these previously memorized settings, you
will get the latest settings that have taken their place.
Switching
some
of the audio mode etc., is automatic
This unit does not store
remove
settings
the disc from this unit
unit OFF when DVD
TV
on
discs.
or
title
or
in memory, if you
switch power to this
menu
is
displayed
on
the
screen.
31
Special Recording
from DVD To VCR
Copying
This unit allows you to copy the contents of
VHS tape with a press of the COPY button.
Recording from
a
DVD to
a
another video
recorder
With this video recorder you
an external source, such as
recorder
Notes
perform the ACMS (Automatic Channel
Memory System) before starting a copy. (see p. 13)
or a
can
make
copying
recordings
from
from another video
camcorder.
You must
If the DVD is NTSC disc, you must set Pseudo PAL
to Off (see page 18).
If the DVD you
protected,
attempting to copy is copy
you may not be able to copy the disc.
1
2
are
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
B.
used for
will be referred to
as
VCR A.
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS
Insert
a
videotape
Press the COPY button
If the DVD disc
Play
the
menu
button
the unit front
panel.
to
begin copying.
Process
the remote control and then press the
STOP button to end the copy.
You must stop the Copy process
the DVD movie ends,
record over and over
or
manually when
replay and
the unit may
again.
1)/VIDEO (VHS IN 1) on the
(L/R)/VIDEO 2
press the REC/ITR
VCR A.
3
To start
4
When you want to finish
on both video recorders.
appears, you may need to
manually
DVD
on
IN
rear
on
Insert the recorded tape into VCR A and
into VCR B.
Copy
4 Stop
When the
is finished playing, press the VHS
button
(VHS
your VCR or AUDIO 2
panel of your VCR.
2 tape
Tape
on
VCR A should be connected to the AUDIO L/R
panel
of
the front
into the VCR deck.
The DVD will go into Play mode and the VCR will
go into Record mode.
press the
1
Tape
blank VHS
the DVD to VHS
3 Copy
32
Note
In the
recording,
and PLAY
on
copying,
on
a
blank
VCR B
press the STOP
Troubleshooting
Check the
following guide
for the
possible
cause
VCR do not
DVD
or
properly.
a
before
problem
service.
contacting
Cause
Symptom
work
of
DVD
or
Correction
VHS button is not switched
Refer to page 10.
properly.
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
not work.
No
The TV is not set to receive DVD
picture.
signal
window is
lit.)
Select the
the TV
so
on
output.
player
No sound.
not start
player does
playback.
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
are
not connected
properly.
Connect the audio cable into the
jacks
jacks
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
Digital Audio Output
position.
The disc is dirty.
The TV channels
An
unplayable
is set to the
are
properly.
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
Place the disc with the
down.
down.
within the
Clean the disc.
Check tuning, carry out
tuning again.
Insert a playable disc. (Check the disc
type, color system and Regional code.)
disc is inserted.
placed
Set the
correct
not tuned in
placed upside
The disc is not
does not work
screen.
The equipment connected with the
audio cable is not set to receive DVD
The disc is
The remote control
the TV
securely.
The
The DVD
on
securely.
wrong
is poor.
appears
Connect the video cable into the
The audio cables
picture
appropriate video input mode
the picture from the DVD
The video cable is not connected
signal output.
The
cord into the wall outlet
guide.
playback
Place the disc on the disc tray
inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
Video tape cannot be
inserted.
Is the cassette compartment
No Hi-Fi sound
Audio mode is not set
are
empty?
properly.
Eject
the batteries with
or
side
correctly
change
new ones.
the tape in.
Select "STEREO" by repeatedly
"AUDIO" on the remote control.
pressing
Video Head
Cleaning
accumulating on the head after a long period of time can cause the playback picture to
up. High quality video cassette tapes will not normally deposit dirt onto the video head, but
might. Clean the video heads with a commercially available video heads cleaning tape.
Dirt
become blurred or broken
old or damaged tapes
33
REF NC
Language Code
Enter the
(See
appropriate
17).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sudanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Rumanian
8679
Volapuk
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
34
Specification
General
Power
Power
requirements
AC 110-240V
consumption
23W
Dimensions
Mass
,
50/60 Hz
430 X 97.5 X 360
(approx.)
5.4
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display tape
RF Modulator
UHF 22
68
-
(41˚F
REF NC
95˚F)
to
(Adjustable)
System
Laser
Semiconductor laser,
Video Head system
Double azimuth 4 heads, helical
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):2Hzto44kHz
DVD(PCM48kHz):2Hzto22kHz
response
wavelength
650
nm
scanning.
CD:2Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 95 dB
range
More than 95 dB
Wow and flutter
connectors
only)
(DVD)
(CD)
Less than detected value
(±0.001%
W
PEAK)
Inputs
Audio
-6.0dBm,
more
Video
1.0
75 ohms, unbalanced
Vp-p,
than 47 kohms
Outputs
VIDEO OUT
1
COMPONENT VIDEO OUT
Ω, negative sync., RCA jack
(Y)
(p-p),
V
0.7
(Pb)/(Pr)
(p-p), 75 Ω, RCA jack x 2
Audio output
(digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(analog audio)
2.0 Vrms
Design
and
specifications
Vp-p
75 ohms, sync
1.0 V
are
subject
to
change
negative
75
(1 KHz,
0
dB),
"DTS" and "DTS Digital Out"
are
1
Ω, RCA jack (L, R)
without notice.
Manufactured under license from
Confidential unpublished works.
330
x
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital Theater Systems,
of
Dolby Laboratories.
Inc.
35
P/NO
:
3834RP0091U