advertisement
▼
Scroll to page 2
of 39
OWNER’S MANUAL Safety and Reference LED TV* *LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your TV and retain it for future reference. 28TK420S 24TL520S 28TL520S 24TL510S 28TL510S www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved. Table of contents Licenses--------------------------------------------3 ENG ENGLISH Open source software notice information---------------------------------------3 Preparing------------------------------------------3 Lifting and moving the TV--------------------4 Setting up the TV--------------------------------4 Using the button--------------------------------5 Mounting on a table----------------------------6 Mounting on a wall-----------------------------7 Connections (notifications)------------------8 Remote control----------------------------------9 Maintenance------------------------------------ 11 Troubleshooting------------------------------ 11 Specifications---------------------------------- 12 2 Licenses Supported licenses may differ by model. For more information about licenses, visit www.lg.com. To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information. NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. yy The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. B B A A ENGLISH ENG Open source software notice information Preparing *A < = 10 mm *B < = 18 mm yy Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. yy Recommended HDMI cable types -- High-Speed HDMI®/™ cable -- High-Speed HDMI®/™ cable with Ethernet CAUTION yy Do not use any unapproved items to ensure the safety and product life span. yy Any damage or injuries caused by using unapproved items are not covered by the warranty. 3 Lifting and moving the TV ENG ENGLISH Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy It is recommended to move the TV in the box or packing material that the TV originally came in. yy Before moving or lifting the TV, disconnect the power cord and all cables. yy When holding the TV, the screen should face away from you to avoid damage. yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen. yy When handling the TV, be careful not to damage the protruding joystick button. (Depending on model) Setting up the TV CAUTION yy When transporting the TV, do not expose the TV to jolts or excessive vibration. yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. yy Do not apply excessive pressure to cause flexing/bending of frame chassis as it may damage screen. 4 yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Do not carry the TV upside-down by holding the stand body (or stand base) as this may cause it to fall off, resulting in damage or injury. yy Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) NOTE yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. (Only TK420S/TL520S) yy Lift up the latch at the bottom of the stand base and detach the stand base from the TV. (Only TL510S) Using the button <TL520S/TL510S> yy Image shown may differ from your TV. <TK420S> 1 2 3 ENGLISH ENG Power On (Press) Power Off1 (Press and hold) Menu Control (Press2) Menu Selection (Press and Hold3) You can simply operate the TV functions, using the button. (Depending on model) All running apps will close, and any recording in progress will stop. You can access and adjust the menu by pressing the button when TV is on. You can use the function when you access menu control. Adjusting the menu When the TV is turned on, press the button one time. You can adjust the menu items using the buttons. (Depending on model) <TL520S/TL510S> Turns the power off. Accesses the setting menu. Clears on-screen displays and returns to TV viewing. Changes the input source. Scrolls through the saved programmes. Adjusts the volume level. Basic functions <TK420S> Power On (Press) Power Off (Press and hold1) Volume Control Programmes Control 1 If the menu button is on the screen, pressing and holding the button will let you exit the menu. NOTE yy If you press the joystick button first, you may not be able to adjust the volume level and saved programmes. CAUTION yy With your finger on the joystick button, when moving it up, down, left or right be careful not to press the button in. 5 Mounting on a table (This is not available for all models.) yy Image shown may differ from your TV. ENG ENGLISH 1 Using the kensington security system Lift and tilt the TV into its upright position on a table. -- Leave a 100 mm (minimum) space from the wall for proper ventilation. yy Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. 100 mm 100 mm 100 mm 100 mm NOTE 2 Connect the AC-DC Adapter and power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. yy Please be sure to connect the TV to the AC/DC power adapter before connecting the TV’s power plug to a wall power outlet. 6 yy The Kensington security system is optional. You can obtain additional accessories from most electronics stores. Mounting on a wall CAUTION 100 mm 100 mm 100 mm 100 mm 100 mm If you intend to mount the TV to a wall, attach Wall mounting interface (optional parts) to the back of the TV. When you install the TV using the wall mounting interface (optional parts), attach it carefully so it will not drop. 1 If you use screw longer than standard, the TV might be damaged internally. If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 2 yy Must use the enclosed screw in the box. (Depending on model) yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. yy Use an authorized LG wall mount and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the TV and void your warranty. yy Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. yy Screw length from outer surface of back cover should be under 8 mm. Wall mount Pad Back Cover Wall mount Pad Back Cover Standard screw : M4 x L10 Separate purchase (Wall mounting bracket) Model 24TL520S 24TL510S 28TK420S 28TL520S 28TL510S 75 x 75 100 x 100 Wall mount (A x B) (mm) A B Standard screw Number of screws Wall mount bracket (optional) M4 x L10 4 RW120 ENGLISH ENG For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Max.8 mm NOTE yy Use the screws that are listed on the VESA standard screw specifications. yy The wall mount kit includes an installation manual and necessary parts. yy The wall mount bracket is optional. You can obtain additional accessories from your local dealer. yy The length of screws may differ depending on the wall mount. Be sure to use the proper length. yy For more information, refer to the instructions supplied with the wall mount. 7 Connections (notifications) ENG ENGLISH Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE yy The external device connection may differ from the model. yy Connect external devices to the TV regardless of the order of the TV port. yy If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. yy Refer to the external equipment’s manual for operating instructions. yy If you connect a gaming device to the TV, use the cable supplied with the gaming device. yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear. yy In PC mode, some resolution settings may not work properly depending on the graphics card. Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω) (Not Provided). yy Use a signal splitter to use more than 2 TVs. yy If the image quality is poor, install a signal amplifier properly to improve the image quality. yy If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. yy An antenna cable and converter are not supplied. yy Supported DTV Audio : MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC 8 Satellite dish connection (Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). CI module connection (Depending on model) View the encrypted (pay) services in digital TV mode. yy Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. yy If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator. PC connection When connecting your PC to the HDMI input, set the HDMI input’s [Input Label] to [PC] (INPUT) (Remote control) [All Inputs] [EDIT ICON] [PC] Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. yy Supported HDMI Audio format: Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), DTS (44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz) (Depending on model) Remote control CAUTION yy Do not mix old and new batteries, as this may damage the remote control. yy The remote control will not be included for all sales market. Make sure to point the remote control toward the remote control sensor on the TV. # (Power) Turns the TV on or off. Selects Radio, TV and DTV programme. (INPUT) Changes the input source. (Q.Settings) Accesses the Quick Settings. By zooming in on the selected area, you can view it in full screen. Recalls your preferred subtitle in digital mode. Number buttons Enters numbers. Alphabet buttons Enters letters. Accesses the saved programme list. (Space) Opens an empty space on the screen keyboard. Shows programme guide. 1 You can access apps or Live TV using the number buttons corresponding to the features. Adjusts the volume level. Views the information of the current programme and screen. (SEARCH) Search for content such as TV programmes, movies and other videos, or perform a web search by entering text in the search bar. (MUTE) Mutes all sounds. (MUTE)1 Accesses the [Accessibility] menu. Scrolls through the saved programmes. Moves to the previous or next screen. ENGLISH ENG The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. (Some buttons and services may not be provided depending on models or regions.) 1 To use the button, press and hold for more than 3 seconds. # 9 ENG ENGLISH # Streaming Service buttons Connects to the Video Streaming Service. (HOME) Shows the Home menu. (HOME)1 Shows the previous history. Returns to the previous level. Clears on-screen displays and returns to TV viewing. Navigation buttons (up/down/left/right) Scrolls through menus or options. Selects menus or options and confirms your input. Teletext buttons ( ) These buttons are used for teletext. 1 Provides content related to the program you are currently watching. Audio descriptions function will be enabled. Starts to record and displays record menu. (Only Time MachineReady supported model) Returns to LIVE TV. Control buttons ( ) Controls media contents. , , , These access special functions in some menus. 10 Maintenance Cleaning your TV yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. yy Avoid touching the screen at all times, as this may result in damage to the screen. yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and image distortions. yy Do not use any chemicals as this may damage the product. yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. ENGLISH ENG Clean your TV regularly to keep the best performance and to extend the product lifespan. Troubleshooting yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet. yy Check if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. yy Check the power control settings. The power supply may be interrupted. yy Check if the [Sleep Timer] / [Timer Power Off] is activated in the [Timers] settings. yy Check if the [Auto Power Off] is activated in the [General] [Eco Mode] settings. (Depending on model) yy If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. When connecting to the PC (HDMI), [No Signal] or [Invalid Format] is displayed. yy Turn the TV off/on using the remote control. yy Reconnect the HDMI cable. yy Restart the PC with the TV on. Preventing “Image burn” or “Burn-in” on your TV screen yy If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. yy If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. yy Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD) to prevent image burn. 11 Specifications Product specifications may be changed without prior notice due to upgrade of product functions. ENG ENGLISH Models 28TK420S 24TL520S 28TL520S 24TL510S 28TL510S Dimensions (W x H x D) (mm) With stand Without stand 641.5 x 428.7 x 159.2 563.1 x 367 x 150.1 649.4 x 420 x 150.1 563.1 x 393.8 x 148.6 649.4 x 447.8 x 187.5 641.5 x 396.3 x 59.5 563.1 x 340.9 x 58 649.4 x 393.8 x 61.4 563.1 x 340.9 x 58 649.4 x 393.8 x 61.4 Weight (kg) With stand Without stand 4.6 3.3 4.55 3.6 4.95 4.5 3.25 4.5 3.25 4.5 Power consumption 28 W 25 W 28 W 25 W 28 W Power requirement 19 V 19 V 19 V 19 V 19 V 2.0 A 2.0 A 2.0 A 2.0 A 2.0 A Wireless module specification yy As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. yy For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. 0197 Wireless LAN module(LGSWFAC71) Specification Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power(Max.) 2400 to 2483.5 MHz 13 dBm 5150 to 5725 MHz 16.5 dBm 5725 to 5850 MHz (Not for EU) 10 dBm 0197 * "IEEE 802.11ac" is not available in all countries. 12 AC/DC Adapter CI module Size (W x H x D) Environment condition ENGLISH ENG Manufacturer: Lien Chang Model: LCAP16B-E, LCAP21C Manufacturer: Honor Model: ADS-45FSN-19 19040GPG, ADS-45SN-19-3 19040G In: AC 100 – 240 V ~ 50/60 Hz Out: DC 19 V 2.1 A 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature Operating Humidity Storage Temperature Storage Humidity 0 °C to 40 °C Less than 80 % -20 °C to 60 °C Less than 85 % (Depending on country) Satellite Television system DVB-S/S2* Programme coverage 950 ~ 2150 Mhz Maximum number of storable programmes 6000 External antenna impedance Digital TV Terrestrial DVB-T DVB-T2* VHF III : 174 ~ 230 Mhz UHF IV : 470 ~ 606 Mhz UHF V : 606 ~ 862 Mhz S Band II : 230 ~ 300 Mhz S Band III : 300 ~ 470 Mhz Cable Analogue TV Terrestrial / Cable DVB-C PAL/SECAM B/G, D/K, I,SECAM L 46 ~ 890 Mhz 46 ~ 862 Mhz 2000 75 Ω * Only DVB-T2/C/S2 support models. 13 WARNING! ENG ENGLISH Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: yy Using cabinets or stands recommended by the manufacturer of the television set. yy Only using furniture that can safely support the television set. yy Ensuring the television set is not overhanging the edge of the supporting furniture. yy Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. yy Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. yy Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied. Symbols Refers to alternating current(AC). Refers to direct current(DC). Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage. 14 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL No. SMART TV Quick Setup Guide * Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending on the OS(Operating System). * App icon positions may vary on the platform, depending on the software version. Network Settings 1 Press the (Home) button on the remote to access the Home menu. Point the (Settings) icon and select by pressing the Wheel (OK) button on the remote. Picture Sound Programmes Network General Safety Accessibility WI-FI NETWORK Network / ON ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Add a hidden wireless network Connect via WPS PBC. Connect via WPS PIN. Advanced Wi-Fi Settings For wireless AP (Router) that have the symbol, you need to enter the security key. 2 Point the (All Settings) icon and select by pressing the Wheel (OK) button on the remote. 5 If the connection is successful, the "Connected to Internet" is displayed. Picture Sound Programmes NETWORK TV Name [LG] WebOS TV WEBOS3.5 Wired Connection (Ethernet) Not Connected Wi-Fi Connection Network General All Settings 3 Select the Network → Wired Connection (Ethernet) or Wi-Fi Connection. Picture Sound Programmes NETWORK Wi-Fi Connection Network General Safety You can check the status of connection in Advanced Wi-Fi settings. [LG] WebOS TV WEBOS3.5 Not Connected Not Connected Wi-Fi Direct LG Connect Apps Safety Accessibility Picture Sound Programmes Network General Safety 4 The device automatically tries to connect to the network available (wired network first). When you select the Wi-Fi Connection, the network list available is displayed. Choose the network you wish to use. Wi-Fi Direct LG Connect Apps Accessibility TV Name Wired Connection (Ethernet) Connected to Internet Accessibility WI-FI NETWORK Network / ON ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Add a hidden wireless network Connect via WPS PBC. Connect via WPS PIN. Advanced Wi-Fi Settings www.lg.com Troubleshooting Network Problems 1 Press the (Home) button on the remote to access the Home menu. Point the (Settings) icon and select by pressing the Wheel (OK) button on the remote. Check the AP (Router) or consult your Internet service provider. When X appears next to Gateway: 1 Unplug the power cord of the AP (Router) and try to connect after 5 seconds. 2 Point the (All Settings) icon and select by pressing the Wheel (OK) button on the remote. 3 Select the Network → Wired Connection (Ethernet) or Wi-Fi Connection → Advanced Wi-Fi settings. Sound Programmes NETWORK Picture TV Name Sound [LG] WebOS TV WEBOS3 Wired Connection (Ethernet) Not Connected Wi-Fi Connection Network General Not Connected Wi-Fi Direct LG Connect Apps Programmes Network General Safety Safety Accessibility Accessibility WI-FI NETWORK Network / 3 Contact internet service provider or AP (Router) company. When X appears next to DNS: All Settings Picture 2 Initialize (Reset) the AP (Router). ON ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Add a hidden wireless network Connect via WPS PBC. Connect via WPS PIN. Advanced Wi-Fi Settings Follow the instructions below that correlate to your network status. Check the TV or the AP (Router). When X appears next to TV: 1 Check the connection status of the TV, AP (Router). 2 Power off and power on the TV, AP (Router). 3 If you are using a static IP, enter the IP directly. 4 Contact internet service provider or AP (Router) company. 1 Unplug the power cord of the AP (Router) and try to connect after 5 seconds. 2 Initialize (Reset) the AP (Router). 3 Check that the MAC address of the TV/AP (Router) is registered with your Internet service provider. (The MAC address displayed on the right pane of the network status window should be registered with your Internet service provider.) 4 Check the AP (Router) manufacturer’s website to make sure your router has the latest firmware version installed. SmartShare PC SW Installing & Setting 1 Install the SmartShare PC SW programme on your PC. 2 Go to www.lg.com. Then, select your region. 3 Select SUPPORT. Then, select Drivers & Software, SOFTWARE UPDATE or Software & Firmware. 4 Search for your model. Then, select SmartShare PC SW. 5 You can run the programme when installation is complete. NOTE yy SmartShare service is only available if TV and other devices are connected via a single AP (Router). SmartShare Connection to Smartphone 1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices. 4 Open Device Connector application. (Home) → Device Connector → Smartphone → CONTENT SHARE. 5 Select the file type you want to play (movie, audio or photo). 6 Select a movie, music or photo file to play on the TV. 7 Play the media file to view and enjoy it on your TV. Updating the TV Firmware * If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. 1 (Home) → (Settings) → CHECK FOR UPDATES (All Settings) → General → About This TV → 2 After checking the version of the software, update it. If you check the "Allow Automatic Updates", you can update the software automatically. Picture GENERAL Picture ABOUT THIS TV Sound Eco Mode Sound Software Version Programmes Network General Safety Monbile TV On SIMPLINK (HDMI-CEC) LG Wireless Keyboard Setting Help Screen Saver Reset to Initial Settings ꔐ HDMI ULTRA HD Deep Colour xx.xx.xx Allow Automatic Updates Programmes Network CHECK FOR UPDATES TV Information [LG] webOS TV WEBOS3.5 General Customer Service User Agreements Safety About This TV Accessibility General / Accessibility Legal Notice Open Source Software Notice Wi-Fi Direct Setting Picture Sound Programmes Network Wi-Fi Direct Network / REFRESH LIST ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE (Home) → (Settings) → (All Settings) → Network → Wi-Fi Direct If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct. With SmartShare, you can share files or screens of devices connected to Wi-Fi Direct. General 1 When you open Wi-Fi Direct menu, a list of available devices appears. Safety 2 When you are prompted to request connection, select Yes. Wi-Fi Direct is now connected to your TV. Accessibility Miracast Setting Miracast allows a portable device to securely send video and sound to the TV wirelessly. (Home)/ (Input) → Screen Share 1 Miracast should be set to "ON" on your portable device. 2 When your TV is detected, select the device on your portable device. When connection is completed, the device screen appears on the TV screen. If you turn Listen Mode to ON after launching the Screen Share app, you can connect the device without starting the Screen Share app. WiDi (Wireless Display) Setting Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet network for mirrored and dual monitor display on your TV. You can sit back and experience your favorite movies, videos, photos, online shows and more in full HD on your TV with great image clarity and sound. (Home)/ (Input) → Screen Share 1 Intel's WiDi is set to On. Your laptop runs the Intel WiDi programme. 2 It detects LG webOS TVs available, which supports WiDi. In the list, select the TV you want and click Connect. Enter the number shown on the screen into the input field ( ) on your laptop and then click Continue. ******** Notebook Screen 3 The laptop screen appears on the TV screen. The wireless environment may affect the screen display. If the connection is poor, the Intel WiDi connection may be lost. * LG TVs do not need to register. ******** Please call LG Customer Service if you experience any problems. Kurzanleitung zur Einrichtung des SMART TV * Ihr TV-Gerät kann von der Abbildung möglicherweise leicht abweichen. * Auf PC oder Mobiltelefon angezeigte Bilder können möglicherweise je nach Betriebssystem leicht abweichen. * Die Positionen der Anwendungssymbole können auf der Plattform je nach Softwareversion variieren. Netzwerkeinstellungen 1 Drücken Sie zur Anzeige des Home-Menüs die Taste (Home) auf der Fernbedienung. Markieren Sie das Symbol (Einstellungen) und wählen Sie es durch Drücken der Taste Rad (OK) auf der Fernbedienung aus. Bild Ton Sender Netzwerk Allgemein Sicherheit Barrierefreiheit Wi-Fi-Netzwerk Netzwerk / EIN ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Verstecktes W-LAN hinzufügen Über WPS-PBC verbinden. Über WPS-PIN verbinden. Erweiterte Wi-Fi-Einstellungen Für kabellose Router (AP) mit dem Symbol müssen Sie den Sicherheitsschlüssel eingeben. 2 Markieren Sie das Symbol (Alle Einstellungen) und wählen Sie es durch Drücken der Taste Rad (OK) auf der Fernbedienung aus. 5 Wenn die Verbindung hergestellt wurde, wird „Mit dem Internet verbunden“ angezeigt. Bild Ton Sender Netzwerk TV-Name [LG] WebOS TV WEBOS3.5 Drahtgebundene Verbindung (Ethernet) Nicht verbunden Wi-Fi-Verbindung Netzwerk Allgemein Mit dem Internet verbunden Wi-Fi Direct LG Connect Apps Sicherheit Alle Einstellungen Barrierefreiheit 3 Wählen Sie Netzwerk → Drahtgebundene Verbindung (Ethernet) oder Wi-Fi-Verbindung. Bild Ton Sender Netzwerk TV-Name [LG] WebOS TV WEBOS3.5 Drahtgebundene Verbindung (Ethernet) Nicht verbunden Sie können den Verbindungsstatus unter Erweiterte Wi-Fi-Einstellungen prüfen. Bild Ton Wi-Fi-Verbindung Netzwerk Allgemein Nicht verbunden Wi-Fi Direct LG Connect Apps Sender Netzwerk Sicherheit Allgemein Barrierefreiheit Sicherheit Barrierefreiheit 4 Das Gerät versucht automatisch, eine Verbindung zu dem verfügbaren Netzwerk herzustellen (zuerst kabelgebundenes Netzwerk). Wenn Sie die Wi-Fi-Verbindung auswählen, wird eine Liste mit den verfügbaren Netzwerken angezeigt. Wählen Sie das gewünschte Netzwerk aus. Wi-Fi-Netzwerk Netzwerk / EIN ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Verstecktes W-LAN hinzufügen Über WPS-PBC verbinden. Über WPS-PIN verbinden. Erweiterte Wi-Fi-Einstellungen www.lg.com Behebung von Netzwerkproblemen 1 Drücken Sie zur Anzeige des Home-Menüs die Taste (Home) auf der Fernbedienung. Markieren Sie das Symbol (Einstellungen) und wählen Sie es durch Drücken der Taste Rad (OK) auf der Fernbedienung aus. Prüfen Sie den Router, oder wenden Sie sich an Ihren Internetdienstanbieter. Wenn ein X neben dem Gateway erscheint: 1 Trennen Sie das Stromkabel des AP (Router), und versuchen Sie nach 5 Sekunden erneut, eine Verbindung herzustellen. 2 Markieren Sie das Symbol (Alle Einstellungen) und wählen Sie es durch Drücken der Taste Rad (OK) auf der Fernbedienung aus. 2 Initialisieren Sie den AP (Router) (zurücksetzen). 3 Wenn Sie sich an Ihren Internetdienstanbieter oder die Firma des Routers (AP). Wenn ein X neben dem DNS erscheint: Alle Einstellungen 3 Wählen Sie Netzwerk → Drahtgebundene Verbindung (Ethernet) oder Wi-Fi-Verbindung → Erweiterte Wi-FiEinstellungen. Bild Ton Sender Netzwerk TV-Name Allgemein Ton [LG] WebOS TV WEBOS3 Drahtgebundene Verbindung (Ethernet) Nicht verbunden Wi-Fi-Verbindung Netzwerk Bild Nicht verbunden Wi-Fi Direct LG Connect Apps Sender Netzwerk Allgemein Wi-Fi-Netzwerk Netzwerk / EIN ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Verstecktes W-LAN hinzufügen Über WPS-PBC verbinden. Sicherheit Sicherheit Barrierefreiheit Barrierefreiheit Erweiterte Wi-Fi-Einstellungen Über WPS-PIN verbinden. Befolgen Sie je nach Netzwerkstatus die nachfolgenden Anweisungen. Prüfen Sie das Fernsehgerät oder den Router (AP). Wenn ein X neben dem TV-Gerät erscheint: 1 Überprüfen Sie den Verbindungsstatus von Fernsehgerät und AP (Router). 2 Schalten Sie das Fernsehgerät und den AP (Router) aus und wieder ein. 3 Wenn Sie eine feste IP verwenden, geben Sie die IP direkt ein. 4 Wenn Sie sich an Ihren Internetdienstanbieter oder die Firma des Routers (AP). 1 Trennen Sie das Stromkabel des AP (Router), und versuchen Sie nach 5 Sekunden erneut, eine Verbindung herzustellen. 2 Initialisieren Sie den AP (Router) (zurücksetzen). 3 Prüfen Sie, ob die MAC-Adresse des Fernsehgerätes/ AP (Router) bei Ihrem Internetdienstanbieter registriert ist. (Die MAC-Adresse, die im rechten Bereich des Netzwerkstatusfensters angezeigt wird, muss bei Ihrem Internetdienstanbieter registriert sein.) 4 Prüfen Sie auf der Website des Routerherstellers, ob die neueste Firmwareversion auf Ihrem AP (Router) installiert ist. Installation und Einrichtung von SmartShare PC SW 1 Installieren Sie das SmartShare PC SW -Programm auf Ihrem PC. 2 Gehen Sie auf www.lg.com. Wählen Sie dann Ihre Region aus. 3 Wählen Sie SERVICE. Wählen Sie dann Treiber & Software, SOFTWARE UPDATE oder Software & Firmware. 4 Suchen Sie nach Ihrem Modell. Wählen Sie dann SmartShare PC SW. 5 Wenn die Installation abgeschlossen ist, können Sie das Programm ausführen. HINWEIS yy Der SmartShare-Dienst ist nur verfügbar, wenn Fernseher und andere Geräte über einen einzelnen AP (Router) verbunden sind. SmartShare-Verbindung zum Smartphone 1 Prüfen Sie, ob auf Ihrem Smartphone Wi-Fi aktiviert ist. Zum Verwenden von SmartSharemüssen beide Geräte in dasselbe lokale Netzwerk eingebunden sein. 2 Installieren Sie die App zur Freigabe von Inhalt auf Ihrem Smartphone bzw. führen Sie diese App aus (auf LG-Telefonen hat diese die Bezeichnung LG TV Plus ). 3 Aktivieren Sie die Freigabe von Inhaltsdateien für andere Geräte auf Ihrem Smartphone. 4 Öffnen Sie die Anwendung Geräteanschluss . (Home) → Geräteanschluss → Smartphone → INHALT TEILEN. 5 Wählen Sie den Dateityp, den Sie abspielen möchten (Film, Audio oder Foto). 6 Wählen Sie eine Film-, Musik- oder Fotodatei aus, die Sie auf dem Fernsehgerät abspielen möchten. 7 Starten Sie die Mediendatei, um diese über Ihr Fernsehgerät abzuspielen. Aktualisieren der TV-Firmware * Wenn das Fernsehgerät nach der Auslieferung das erste Mal eingeschaltet wird, kann die Initialisierung einige Minuten dauern. 1 (Home) → (Einstellungen) → TV-Gerät → Auf Updates prüfen (Alle Einstellungen) → Allgemein → Info zu diesem 2 Sie können die Softwareversion prüfen und aktualisieren. Wenn Sie„Automatische Updates zulassen“ aktivieren, wird die Software automatisch aktualisiert. Bild Allgemein Bild Info zu diesem TV-Gerät Ton Eco-Modus Ton Softwareversion Sender Netzwerk Allgemein Sicherheit TV-Gerät per Mobilgerät einschalten SIMPLINK (HDMI-CEC) Kabellose LG-Tastatur Hilfe zu Einstellungen Bildschirmschoner Auf Werkseinstellungen zurücksetzen ꔐ HDMI ULTRA HD Deep Colour xx.xx.xx Automatische Updates zulas sen Sender Netzwerk Auf Updates prüfen TV-Informationen [LG] webOS TV WEBOS3.5 Allgemein Kundendienst Benutzervereinbarungen Sicherheit Info zu diesem TV-Gerät Barrierefreiheit Allgemein / Barrierefreiheit Rechtliche Hinweise Anmerkung zu Open Source-Software Wi-Fi Direct-Einstellungen Wi-Fi Direct Bild Netzwerk / Ton LISTE AKTUALISIEREN ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Sender Netzwerk Allgemein (Home) → (Einstellungen) → (Alle Einstellungen) → Netzwerk → Wi-Fi Direct Falls kein lokales Netzwerk verfügbar ist, können Sie ein tragbares Gerät per Wi-Fi Direct auch direkt mit dem TV-Gerät verbinden. Mit SmartShare können Sie Dateien oder Bildschirme von Geräten freigeben, die mit WiFi Direct verbunden sind. 1 Wenn Sie das Menü Wi-Fi Direct öffnen, wird eine Liste verfügbarer Geräte angezeigt. Sicherheit Barrierefreiheit 2 Wenn Sie aufgefordert werden, eine Verbindung anzufordern, wählen Sie Ja. Wi-Fi Direct ist jetzt mit Ihrem Fernseher verbunden. Miracast-Einstellung Mit Miracast können Videos und Audiodateien sicher von einem tragbaren Gerät kabellos an ein TV- Gerät gesendet werden. (Home)/ (Eingang) → Screen Share 1 Miracast muss auf Ihrem tragbaren Gerät auf „Ein“ gestellt sein. 2 Wenn Ihr TV-Gerät erkannt wurde, wählen Sie es auf Ihrem tragbaren Gerät aus. Wenn die Verbindung hergestellt wurde, erscheint der Bildschirm des Geräts auf dem TV-Bildschirm. Wenn Sie den Empfangsmodus nach dem Start der App „Screen Share“ auf Ein stellen, können Sie das Gerät verbinden, ohne die App „Screen Share“ zu starten. WiDi (Wireless Display)-Einstellung Die Intel WiDi (Wireless Display)-Technologie ermöglicht eine einfache und schnelle kabellose Verbindung oder Internetverbindung für gespiegelte und duale Bildschirme auf Ihrem Fernsehgerät. Sie können Ihre Lieblingsfilme, -videos, -fotos, -onlinesendungen und vieles mehr in Full HD mit hervorragender Bildqualität und großartigem Ton entspannt auf Ihrem Fernsehgerät genießen. (Home)/ (Eingang) → Screen Share 1 Intel's WiDi ist auf Eingestellt. Ihr Laptop ist mit dem Programm Intel WiDi ausgestattet. 2 Es erkennt die verfügbaren LG webOS TVs, die WiDi unterstützen. Wählen Sie in der Liste den gewünschten Fernseher aus und klicken Sie auf Klicken Sie auf „ Connect (Verbindung)“. Geben Sie die PIN-Nummer, die auf dem Bildschirm angezeigt wird, in das Eingabefeld ( ) auf Ihrem Laptop ein, und klicken Sie dann auf „Weiter“. ******** Notebook-Bildschirm 3 Der Laptop-Bildschirm wird auf dem TV-Bildschirm angezeigt. Die kabellose Umgebung kann sich auf die Bildschirmanzeige auswirken. Bei einer schlechten Verbindung kann die Intel WiDi-Verbindung verloren gehen. ******** * LG TV muss nicht registriert werden. Rufen Sie den LG Kundendienst an, wenn Sie Probleme haben. Guide de démarrage rapide SMART TV * L'image affichée peut être différente de celle de votre téléviseur. * L'image affichée sur un ordinateur ou un téléphone portable peut être différente selon le système d'exploitation. * La position des icônes d'application peut varier sur la plate-forme selon la version du logiciel que vous utilisez. Paramètre Réseau 1 Appuyez sur le bouton (Accueil) de la télécommande pour accéder au menu Accueil. Mettez l'icône (Paramètres) en surbrillance et sélectionnez-la en appuyant sur la Molette(OK) de la télécommande. Image Son Chaînes Réseau Général Sécurité Accessibilité Réseau Wi-Fi Réseau / ACTIVÉ ꔐ WI-FI: AAA WI-FI: BBB WI-FI: CCC WI-FI: DDD WI-FI: EEE Ajouter un réseau sans fil masqué Connexion via WPS PBC. Connexion via WPS PIN. Paramètres Wi-Fi avancés Pour connecter un routeur AP sans fil doté du symbole , vous devez saisir une clé de sécurité. 2 Mettez l'icône (Tous les paramètres) en surbrillance et sélectionnez-la en appuyant sur la Molette(OK) de la télécommande. 5 Une fois la connexion effectuée, la mention "Connecté à Internet" s'affiche à l'écran. Image Son Chaînes Réseau Nom du téléviseur [LG] WebOS TV WEBOS3.5 Connexion filaire (Ethernet) Non connecté Connexion Wi-Fi Réseau Général Tous les paramètres 3 Sélectionnez le Réseau → Connexion filaire (Ethernet) ou Connexion Wi-Fi. Image Son Chaînes Réseau Connexion Wi-Fi Réseau Général Sécurité Vous pouvez vérifier l'état de la connexion dans les Paramètres Wi-Fi avancés. [LG] WebOS TV WEBOS3.5 Connexion filaire (Ethernet) Non connecté Wi-Fi Direct LG Connect Apps Sécurité Accessibilité 4 Le périphérique essaye automatiquement de se connecter au réseau disponible (prioritairement au réseau filaire). Lorsque vous sélectionnez Connexion Wi-Fi, la liste des réseaux s'affiche à l'écran. Sélectionnez le réseau que vous souhaitez utiliser. Wi-Fi Direct LG Connect Apps Accessibilité Nom du téléviseur Non connecté Connecté à Internet Image Son Chaînes Réseau Réseau Wi-Fi Réseau / ACTIVÉ ꔐ WI-FI: AAA WI-FI: BBB WI-FI: CCC WI-FI: DDD WI-FI: EEE Général Ajouter un réseau sans fil masqué Sécurité Connexion via WPS PBC. Accessibilité Connexion via WPS PIN. Paramètres Wi-Fi avancés www.lg.com Dépannage des problèmes de réseau 1 Appuyez sur le bouton (Accueil) de la télécommande pour accéder au menu Accueil. Mettez l'icône (Paramètres) en surbrillance et sélectionnez-la en appuyant sur la Molette(OK) de la télécommande. Vérifiez l'état du routeur ou contactez votre fournisseur de services Internet. Lorsque X apparaît à côté de la passerelle: 1 Débranchez le cordon d'alimentation du point d'accès (routeur) patientez 5 secondes, puis rebranchez-le. 2 Mettez l'icône (Tous les paramètres) en surbrillance et sélectionnez-la en appuyant sur la Molette(OK) de la télécommande. 2 Initialisez (Réglages usine) le point d'accès (routeur). 3 Contactez votre fournisseur de services Internet ou le fabriquant de votre routeur AP. Lorsque X apparaît à côté de DNS: Tous les paramètres 3 Sélectionnez le Réseau → Connexion filaire (Ethernet) ou Connexion Wi-Fi → Paramètres Wi-Fi avancés. Image Son Chaînes Réseau Nom du téléviseur Général Son [LG] WebOS TV WEBOS3 Connexion filaire (Ethernet) Non connecté Connexion Wi-Fi Réseau Image Non connecté Wi-Fi Direct LG Connect Apps Chaînes Réseau Général Sécurité Sécurité Accessibilité Accessibilité Réseau Wi-Fi Réseau / ACTIVÉ ꔐ WI-FI: AAA WI-FI: BBB WI-FI: CCC WI-FI: DDD WI-FI: EEE Ajouter un réseau sans fil masqué Connexion via WPS PBC. Connexion via WPS PIN. Paramètres Wi-Fi avancés Suivez les instructions ci-dessous en fonction de l'état de votre réseau. Vérifiez l'état de la TV ou du routeur. Lorsque X apparaît à côté du téléviseur: 1 Vérifiez l'état de la connexion de la TV ou du point d'accès (routeur). 2 Allumez puis éteignez la TV ou le point d'accès (routeur). 3 Si vous utilisez une adresse IP statique, saisissez-la directement. 4 Contactez votre fournisseur de services Internet ou le fabriquant de votre routeur AP. 1 Débranchez le cordon d'alimentation du point d'accès (routeur) patientez 5 secondes, puis rebranchez-le. 2 Initialisez (Réglages usine) le point d'accès (routeur). 3 Vérifiez que l'adresse MAC de votre TV/du routeur a bien été enregistrée auprès de votre fournisseur de services Internet. (L'adresse MAC est inscrite sur le panneau de droite de la fenêtre de l'état du réseau et doit avoir été enregistrée auprès de votre fournisseur de services Internet.) 4 Consultez le site Web du fabricant de votre routeur pour savoir si votre routeur bénéficie de la dernière version du micrologiciel. Installation et réglage du logiciel SmartShare PC 1 Installez SmartShare PC SW sur votre ordinateur. 2 Accédez à www.lg.com. Puis, sélectionnez votre région. 3 Sélectionnez SERVICE CLIENTS. Puis, Sélectionnez site Drivers & Software, Mise à jour logiciel ou Logiciel & Firmware 4 Recherchez votre modèle. Puis, sélectionnez SmartShare PC SW. 5 Procédez à l'installation pour exécuter le programme. REMARQUE yy Le service SmartShare est uniquement disponible si le téléviseur et d'autres périphériques sont connectés via un seul Routeur AP. Connexion SmartShare pour smartphone 1 Vérifiez que la fonction Wi-Fi est activée sur votre smartphone. Pour utiliser SmartShare, les deux périphériques doivent être connectés au même réseau local. 2 Installez/exécutez l'application de partage de contenus sur votre smartphone (fonction LG TV Plus sur les téléphones LG). 3 Autorisez le partage de fichiers avec d'autres périphériques sur votre smartphone. 4 Lancez l'application Connectique de périphérique . (Accueil) → Connectique de périphérique → Smartphone → PARTAGE DE CONTENU. 5 Sélectionnez le type de fichier que vous souhaitez lire (films, fichiers audio ou photos). 6 Sélectionnez un film, une musique ou une photo pour diffuser le fichier sur votre téléviseur. 7 Lancez la lecture du fichier multimédia sur votre téléviseur. Mise à jour du micrologiciel de la TV * Si le téléviseur est mis sous tension pour la première fois depuis son expédition depuis l’usine, l’initialisation peut prendre quelques minutes. 1 (Accueil) → (Paramètres) → (Tous les paramètres) → téléviseur → Rechercher les mises à jour Général → À propos de ce 2 Vous pouvez vérifier la version du logiciel et la mettre à jour. Si vous choisissez l'option "Autoriser les mises à jour automatiques", les mises à jour seront effectuées automatiquement. Image Son Chaînes Réseau Général Sécurité Général Image Mode Éco TV Mobile activée SIMPLINK (HDMI-CEC) Clavier sans fil LG Aide pour les réglages Écran de veille Restaurer les paramètres initiaux Son HDMI ULTRA HD Deep Colour Général / ꔐ xx.xx.xx Autoriser les mises à jour automatiques Chaînes Réseau Général Rechercher les mises à jour Informations sur le téléviseur [LG] webOS TV WEBOS3.5 Service client Accords de l'utilisateur Sécurité À propos de ce téléviseur Accessibilité À propos de ce téléviseur Version logicielle Accessibilité Mention légale Remarque sur les logiciels Open Source Réglage Wi-Fi Direct Image Son Chaînes Réseau Wi-Fi Direct Réseau / RAFRAÎCHIR LA LISTE ꔐ WI-FI : AAA WI-FI: BBB WI-FI: CCC WI-FI: DDD WI-FI: EEE Général (Accueil) → (Paramètres) → (Tous les paramètres) → Réseau → Wi-Fi Direct Si le réseau local n'est pas disponible, vous pouvez connecter un périphérique portable directement à votre téléviseur en utilisant la fonction Wi-Fi Direct. Avec SmartShare, vous pouvez partager des fichiers ou des écrans de périphériques connectés à Wi-Fi Direct. 1 Lors de l'ouverture du menu Wi-Fi Direct, une liste des périphériques disponibles apparaît. Sécurité Accessibilité 2 Lorsqu'il vous est demandé d'établir une connexion, sélectionnez Oui. Wi-Fi Direct est désormais connecté à votre TV. Réglage Miracast Miracast permet à un périphérique vidéo d'envoyer sans fil en toute sécurité des contenus vidéo ou audio à une TV. (Accueil)/ (Entrée) → Screen Share 1 Miracast doit être "Activé " sur votre périphérique portable. 2 Lorsque votre téléviseur est détecté, sélectionnez le périphérique correspondant sur votre périphérique portable. Lorsque la connexion est effectuée, l'écran du périphérique apparaît sur l'écran du téléviseur. Si vous lancez l'application Partage d'écran et Activé Mode d'écoute, vous pouvez connecter l'appareil sans démarrer l'application Partage d'écran. Réglage WiDi (Wireless Display, Affichage sans fil) La technologie d'affichage sans fil WiDi (Wireless Display) d'Intel offre une connexion rapide et sans câbles ni réseau Internet pour les affichages à double écran et en miroir sur votre téléviseur. Installez-vous confortablement et profitez de vos films, vidéos, photos, programmes en ligne préférés et bien plus encore en Full HD sur votre téléviseur avec une qualité d'image et de son exceptionnelle. (Accueil)/ (Entrée) → Screen Share 1 Intel WiDi est réglé sur Activé. Votre ordinateur portable prend en charge le programme Intel Widi. 2 Cette fonction détecte les webOS TV LG disponibles et prenant en charge le WiDi. Dans la liste, sélectionnez votre TV et cliquez sur Connecter. Entrez le code PIN indiqué à l'écran dans le champ prévu à cet effet ( ) sur votre ordinateur portable, puis cliquez sur Continuer. ******** Écran de l'ordinateur portable 3 L'écran de l'ordinateur s'affiche sur le téléviseur. L'environnement sans fil peut affecter l'affichage de l'écran. Si la connexion est mauvaise, vous pouvez perdre la connexion Intel WiDi. * Il n'est pas nécessaire ********d'enregistrer votre TV LG. Veuillez appeler le service clientèle de LG en cas de problème. Guía de instalación rápida de SMART TV * La imagen mostrada puede ser diferente a la que aparece en la TV. * La imagen mostrada en un PC o teléfono móvil puede variar en función del SO (sistema operativo). * Las posiciones de los iconos de las aplicaciones pueden variar en la plataforma, dependiendo de la versión del software. CONFIGURACIÓN DE RED 1 Pulse el botón (Inicio) del mando a distancia para acceder al menú Principal. Resalte el icono (Configuración) selecciónelo pulsando el botón Rueda(OK) del mando a distancia. Imagen Sonido Canales Red General Seguridad Accesibilidad RED Wi-Fi Red / ENCENDIDO ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Agregar una red inalámbrica oculta Conectarse a través de WPS PBC. Conectarse a través de WPS PIN. Configuración Wi-Fi avanzada Para los AP (routers) inalámbricos que tienen el símbolo , debe introducir la clave de seguridad. 2 Resalte el icono (Toda la configuración) selecciónelo pulsando el botón Rueda(OK) del mando a distancia. 5 Si la conexión tiene éxito, se muestra el estado "Conectado a Internet". Imagen Sonido Canales Red Nombre de la TV [LG] WebOS TV WEBOS3.5 Conexión cableada (Ethernet) No conectado Conexión Wi-Fi Red General Toda la configuración 3 Seleccione Red → Conexión cableada (Ethernet) o Conexión Wi-Fi. Imagen Red Sonido Nombre de la TV Canales No conectado Conexión Wi-Fi Red General Accesibilidad Puede comprobar el estado de la conexión en Configuración Wi-Fi avanzada. Imagen No conectado Sonido Wi-Fi Direct LG Connect Apps Canales Seguridad Accesibilidad Red General Seguridad 4 El dispositivo intenta conectarse automáticamente a la red disponible (a la red con cables primero). Cuando seleccione la Conexión Wi-Fi, se mostrará la lista de Conexiónes disponibles. Seleccione la red que desea utilizar. Wi-Fi Direct LG Connect Apps Seguridad [LG] WebOS TV WEBOS3.5 Conexión cableada (Ethernet) Conectado a Internet Accesibilidad RED Wi-Fi Red / ENCENDIDO ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Agregar una red inalámbrica oculta Conectarse a través de WPS PBC. Conectarse a través de WPS PIN. Configuración Wi-Fi avanzada www.lg.com Solución de problemas de red 1 Pulse el botón (Inicio) del mando a distancia para acceder al menú Principal. Resalte el icono (Configuración) selecciónelo pulsando el botón Rueda(OK) del mando a distancia. Compruebe el router o consulte con su proveedor de servicios de Internet. Si aparece una X al lado de la puerta de enlace: 1 Desenchufe el cable de alimentación del AP (router) e intente conectar de nuevo cuando transcurran 5 segundos. 2 Resalte el icono (Toda la configuración) selecciónelo pulsando el botón Rueda(OK) del mando a distancia. 2 Inicialice (Reajuste) el AP (router). 3 Póngase en contacto con su proveedor de Internet o del AP (router). Si aparece una X al lado de DNS: Toda la configuración 3 Seleccione Red → Conexión cableada (Ethernet) o Conexión Wi-Fi → Configuración Wi-Fi avanzada. Imagen Sonido Canales Red Imagen Nombre de la TV Sonido [LG] WebOS TV WEBOS3 Conexión cableada (Ethernet) No conectado Conexión Wi-Fi Red General No conectado Wi-Fi Direct LG Connect Apps Canales RED Wi-Fi Red / WI-FI : DDD Red General Seguridad Seguridad Accesibilidad Accesibilidad ENCENDIDO ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : EEE Agregar una red inalámbrica oculta Conectarse a través de WPS PBC. Conectarse a través de WPS PIN. Configuración Wi-Fi avanzada Siga las instrucciones indicadas a continuación que establecen el estado de la red. Compruebe la TV o el AP (router). Si aparece una X al lado de la TV: 1 Compruebe el estado de la conexión del televisor y el AP (router). 2 Apague y encienda el televisor y el AP (router). 3 Si utiliza una IP estática, introdúzcala. 4 Póngase en contacto con su proveedor de Internet o del AP (router). 1 Desenchufe el cable de alimentación del AP (router) e intente conectar de nuevo cuando transcurran 5 segundos. 2 Inicialice (Reajuste) el AP (router). 3 Compruebe que la dirección MAC de la TV/ router está registrada con su proveedor de servicios de Internet. (La dirección MAC mostrada en el panel derecho de la ventana de estado de red se debe registrar con su proveedor de servicios de Internet.) 4 Compruebe el sitio web del fabricante del router para asegurarse de que su router tiene la versión más reciente de firmware instalada. Instalación y ajuste del SW SmartShare PC 1 Instale el programa SmartShare PC SW en su PC. 2 Vaya a www.lg.com. A continuación, seleccione su región. 3 Seleccione Soporte. A continuación, Seleccione Software y Drivers , Actualización de software o Software & Firmware. 4 Busque su modelo. A continuación, seleccione SmartShare PC SW. 5 Puede ejecutar el programa cuando la instalación finalice. NOTA yy El servicio SmartShare solo está disponible si la TV y otros dispositivos están conectados a través de un router individual. Conexión mediante Smartshare con un Smartphone 1 Compruebe que la red Wi-Fi está habilitada en su teléfono inteligente. Para usar SmartShare, ambos dispositivos deben estar conectados a la misma red local. 2 Instale/ejecute la aplicación de contenido compartido en su teléfono inteligente (denominada LG TV Plus en los teléfonos LG). 3 Habilite su teléfono inteligente para compartir archivos de contenido con otros dispositivos. 4 Abra la aplicación Conector de dispositivo. (Inicio) → Conector de dispositivo → Teléfono inteligente → USO COMPARTIDO DEL CONTENIDO. 5 Seleccione el tipo de archivo que desea reproducir (película, audio o foto). 6 Seleccione un archivo de película, música o foto para reproducirlo en la TV. 7 Reproduzca el archivo multimedia para verlo y disfrutarlo en la TV. Actualización del firmware de la TV * La primera vez que se encienda la TV tras su envío, puede tardar unos minutos en iniciarse. 1 (Inicio) → (Configuración) → → Buscar actualizaciones (Toda la configuración) → General → Acerca de esta TV 2 Puede comprobar la versión de software y actualizarla. Si marca la opción "Permitir actualizaciones automáticas", el software se actualizará automáticamente. Imagen General Imagen Acerca de esta TV Sonido Modo Eco Sonido Versión de software Canales Red General Seguridad Accesibilidad ꔐ TV Móvil activada SIMPLINK (HDMI-CEC) Teclado inalámbrico LG Ayuda para la configuración Protector de pantalla Restablecer a la configuración inicial ACERCA DE ESTE TV HDMI ULTRA HD Deep Colour General / xx.xx.xx Permitir actualizaciones automáticas Canales Red Buscar actualizaciones Información de TV [LG] webOS TV WEBOS3.5 General Atención al Cliente Acuerdos de usuario Seguridad Accesibilidad Aviso legal Aviso de software de código abierto Ajuste Wi-Fi Direct (Inicio) → (Configuración) → (Toda la configuración) → Red → Wi-Fi Direct Si no hay disponible una red local, podrá conectar un dispositivo portátil directamente a la TV mediante Wi-Fi Direct. SmartShare le permite compartir archivos o pantallas de dispositivos conectados a Wi-Fi Direct. Wi-Fi Direct Imagen Red / Sonido LISTA PARA ACTUALIZAR ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Canales Red General 1 Cuando abra el menú Wi-Fi Direct, aparecerá una lista de los dispositivos disponibles. Seguridad Accesibilidad 2 Cuando se le pida que solicite conexión, seleccione Sí. Wi-Fi Direct está ya conectado a su TV. Ajuste Miracast Miracast permite a un dispositivo portátil enviar vídeo y sonido a la TV de forma inalámbrica y segura. (Inicio)/ (Entrada) → Screen Share 1 Miracast debe estar "Encendido" en su dispositivo portátil. 2 Cuando se detecte la TV, seleccione el dispositivo en su dispositivo portátil. Una vez finalizada la conexión, la pantalla del dispositivo aparecerá en la pantalla de la TV. Si activa Listen Mode tras iniciar la aplicación Screen Share, podrá conectar el dispositivo sin iniciar la aplicación Screen Share. Ajuste WiDi (pantalla inalámbrica) La tecnología Intel’s WiDi (WiDi de Intel) (pantalla inalámbrica) permite realizar una conexión sencilla y rápida sin cables ni red de Internet para la visualización de monitores reflejados y duales en su TV. Puede sentarse y disfrutar de sus películas, vídeos, fotos y programas en línea favoritos en Full HD en su TV con una magnífica claridad de imagen y sonido. (Inicio)/ (Entrada) → Screen Share 1 Intel's WiDi (WiDi de Intel) está establecido en Encendido. Su portátil ejecuta el programa Intel WiDi. 2 Detecta las TV webOS de LG disponibles, que son compatibles con WiDi. En la lista, seleccione la TV que desee y haga clic en Conectar. Introduzca el número de PIN que se muestra en la pantalla en el campo de entrada ( ) en su portátil y, a continuación, haga clic en Continuar. ******** Pantalla de ordenador portátil 3 La pantalla del ordenador portátil aparece en la pantalla de la TV. El entorno inalámbrico puede afectar a la visualización de la pantalla. Si la conexión es deficiente, puede perderse la conexión Intel WiDi. ******** * No es necesario registrar la TV LG. Llame al centro de atención al cliente de LG si experimenta algún problema. SMART TV - Guida alla configurazione rapida * L’immagine mostrata può risultare differente rispetto alla TV in uso. * L'immagine mostrata su un PC o su un cellulare può variare a seconda del sistema operativo. * A seconda della versione del software, la posizione dell'icona App può variare sulla piattaforma. Impostazione Rete 1 Premere il pulsante (Home) sul telecomando per accedere al menu principale. Evidenziare l'icona (Impostazioni) e selezionarla premendo il pulsante la Rotella(OK) sul telecomando. Immagine Audio Canali Rete Reti Wi-Fi Rete / ATTIVA ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Generale Aggiungere una rete wireless nascosta Sicurezza Connetti tramite WPS PBC. Accessibilità Connetti tramite PIN WPS. Impostazioni Wi-Fi avanzate Per l'AP wireless (router) che presenta il simbolo , è necessario immettere la chiave di protezione. 2 Evidenziare l'icona (Tutte le impostazioni) e selezionarla premendo il pulsante la Rotella(OK) sul telecomando. 5 Al termine della connessione, viene visualizzato il messaggio "Connesso a Internet". Immagine Audio Canali RETE Nome TV [LG] WebOS TV WEBOS3.5 Connessione cablata (Ethernet) Non connesso Connessione Wi-Fi Rete Generale Tutte le impostazioni 3 Selezionare Rete → Connessione cablata (Ethernet) o Connessione Wi-Fi. Immagine RETE Audio Nome TV Canali Non connesso Connessione Wi-Fi Rete Generale Sicurezza È possibile verificare lo stato della connessione in Impostazioni Wi-Fi avanzate. Immagine Non connesso Audio Wi-Fi Direct LG Connect Apps Canali Sicurezza Accessibilità 4 Il dispositivo tenta automaticamente la connessione alla rete disponibile (prima alla rete cablata). Quando si seleziona la Connessione Wi-Fi, viene visualizzato l'elenco delle reti disponibili. Scegliere la rete che si desidera utilizzare. Wi-Fi Direct LG Connect Apps Accessibilità [LG] WebOS TV WEBOS3.5 Connessione cablata (Ethernet) Connesso a Internet Rete Reti Wi-Fi Rete / ATTIVA ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Generale Aggiungere una rete wireless nascosta Sicurezza Connetti tramite WPS PBC. Accessibilità Connetti tramite PIN WPS. Impostazioni Wi-Fi avanzate www.lg.com Risoluzione dei problemi relativi alla rete 1 Premere il pulsante (Home) sul telecomando per accedere al menu principale. Evidenziare l'icona (Impostazioni) e selezionarla premendo il pulsante la Rotella(OK) sul telecomando. Controllare il router oppure consultare il proprio provider di servizi Internet. Se appare una X accanto al Gateway: 1 Scollegare il cavo di alimentazione dell'AP (router) e provare a connettersi nuovamente dopo 5 secondi. 2 Evidenziare l'icona (Tutte le impostazioni) e selezionarla premendo il pulsante la Rotella(OK) sul telecomando. 2 Inizializzare (Reset) l'AP (Router). 3 Contattare il provider di servizi Internet o le società dell'AP (Router). Se appare una X accanto alla DNS: Tutte le impostazioni 3 Selezionare Rete → Connessione cablata (Ethernet) o Connessione Wi-Fi → Impostazioni Wi-Fi avanzate. Immagine Audio Canali RETE Nome TV Generale Sicurezza Accessibilità Audio [LG] WebOS TV WEBOS3 Connessione cablata (Ethernet) Non connesso Connessione Wi-Fi Rete Immagine Non connesso Wi-Fi Direct LG Connect Apps Canali Rete Reti Wi-Fi Rete / ATTIVA ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Generale Aggiungere una rete wireless nascosta Sicurezza Connetti tramite WPS PBC. Accessibilità Connetti tramite PIN WPS. Impostazioni Wi-Fi avanzate Attenersi alle istruzioni riportate di seguito relative allo stato della rete. Controllare il TV o l'AP (router). Se appare una X accanto al TV: 1 Verificare lo stato della connessione del TV, AP (Router). 2 Spegnere e accendere il TV, AP (Router). 3 Se si utilizza un IP statico, immetterlo direttamente. 4 Contattare il provider di servizi Internet o le società dell'AP (Router). 1 Scollegare il cavo di alimentazione dell'AP (router) e provare a connettersi nuovamente dopo 5 secondi. 2 Inizializzare (Reset) l'AP (Router). 3 Verificare che l'indirizzo MAC della TV o del router sia registrato presso il proprio provider di servizi Internet. (l'indirizzo MAC visualizzato nel riquadro di destra della finestra dello stato della rete deve essere registrato presso il proprio provider di servizi Internet.) 4 Controllare il sito Web del produttore per assicurarsi che sul router sia installata la versione più recente del firmware. Installazione e impostazione del software per PC SmartShare 1 Installare il programma SmartShare PC SW sul PC. 2 Andare a www.lg.com. Quindi, selezionare la propria area geografica. 3 Selezionare SUPPORTO. Quindi, Selezionare Drivers & Software, AGGIORNAMENTI SOFTWARE o Software e Firmware 4 Cercare il modello in uso. Quindi, selezionare SmartShare PC SW. 5 Una volta completata l'installazione, è possibile eseguire il programma. NOTA yy Il servizio SmartShare è disponibile solo se il TV e gli altri dispositivi sono connessi tramite un singolo router. Connessione SmartShare allo smartphone 1 Verificare che sullo smartphone sia attivato il Wi-Fi. Per utilizzare SmartShare, entrambi i dispositivi si devono trovare sulla stessa rete locale. 2 Sullo smartphone, installare/eseguire l'applicazione per la condivisione dei contenuti (sui cellulari LG tale applicazione si chiama LG TV Plus). 3 Consentire allo smartphone di condividere file di contenuto con altri dispositivi. 4 Aprire l'applicazione Connettore dispositivo application. (Home) → Connettore dispositivo → Smartphone → CONDIVISIONE CONTENUTI. 5 Selezionare il tipo di file che si desidera riprodurre (filmato, audio o foto). 6 Selezionare un file di filmato, musica o foto da riprodurre sul TV. 7 Riprodurre il file multimediale e visualizzarlo sul TV. Aggiornamento firmware TV * Se il televisore viene acceso per la prima volta dopo essere stato spedito dalla fabbrica, l’inizializzazione potrebbe richiedere alcuni minuti. 1 (Home) → (Impostazioni) → sulla TV → Controlla aggiornamenti (Tutte le impostazioni) → Generale → Informazioni 2 È possibile controllare la versione del software e aggiornarla. Se si seleziona l'opzione "Consentire gli aggiornamenti automatici" il software viene aggiornato automaticamente. Immagine Audio Canali Rete Generale Sicurezza Generale Immagine Modalità Eco Mobile TV attivo SIMPLINK (HDMI-CEC) LG Wireless Keyboard Guida delle impostazioni Screen Saver Ripristina impostazioni iniziali Audio HDMI ULTRA HD Deep Colour Generale / ꔐ xx.xx.xx Consentire gli aggiornamenti automatici Canali Rete Controlla aggiornamenti Informazioni TV [LG] webOS TV WEBOS3.5 Generale Servizio clienti Contratti utente Sicurezza Informazioni sulla TV Accessibilità Informazioni sulla TV Versione software Accessibilità Nota legale Avviso per il software Open Source Impostazione Wi-Fi Direct Immagine Audio Canali Rete Wi-Fi Direct Rete / AGGIORNA ELENCO ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Generale (Home) → (Impostazioni) → (Tutte le impostazioni) → Rete → Wi-Fi Direct Se una rete locale non è disponibile, è possibile collegare un dispositivo portatile direttamente al TV utilizzando la funzione Wi-Fi Direct. Con SmartShare, è possibile condividere i file o le schermate dei dispositivi collegati a Wi-Fi Direct. 1 Quando si apre il menu Wi-Fi Direct, viene visualizzato un elenco di dispositivi disponibili. Sicurezza Accessibilità 2 Quando viene richiesto di stabilire la connessione, selezionare Sì. Wi-Fi Direct è connesso al TV. Impostazione Miracast Miracast consente a un dispositivo portatile di inviare video e audio al TV in modalità wireless, in totale sicurezza. (Home)/ (Ingresso) → Screen Share 1 Miracast deve essere impostato su “Attiva” sul dispositivo portatile. 2 Quando viene rilevato il TV, selezionare il dispositivo sul dispositivo portatile. Al termine dell'operazione, la schermata del dispositivo appare sullo schermo del TV. Se si imposta la modalità di ascolto su Attiva dopo aver lanciato l'app Screen Share, è possibile collegare il dispositivo senza avviare l'app. Impostazione WiDi (Wireless Display) La tecnologia WiDi (Wireless Display) di Intel consente una connessione semplice e veloce senza l'uso di cavi o reti Internet per la visualizzazione di monitor mirror e dual sul TV. Puoi sederti e goderti i tuoi film preferiti, video, foto, programmi online e molto altro in full HD sul TV, con qualità audio e video incredibili. (Home)/ (Ingresso) → Screen Share 1 Intel's WiDi è impostato su Attiva. Il laptop esegue il programma Intel WiDi. 2 Vengono rilevate le LG Webos TV disponibili che supportano WiDi. Nell'elenco, selezionare la TV desiderata e fare clic su Connetti. Immettere il codice PIN visualizzato sullo schermo nel campo di immissione ( ) del laptop e fare clic su Continua. ******** Schermo notebook 3 La schermata del notebook viene visualizzata sullo schermo del TV. L'ambiente wireless può influire sulla visualizzazione dello schermo. In caso di scarsa connettività, la connessione Intel WiDi potrebbe essere persa. ******** * Non è necessario registrare la TV LG. Chiamare il servizio clienti LG se si verificano problemi. Ghid rapid de instalare SMART TV * Imaginea ilustrată poate fi diferită de televizorul dvs. * Imaginea ilustrată pe un PC sau pe un telefon mobil poate varia în funcţie de SO (Sistemul de Operare). * Poziţiile pictogramei aplicaţiei pot varia pe platformă, în funcţie de versiunea de software. Setări pentru reţea 1 Apăsaţi butonul (ACASĂ) de pe telecomandă pentru a accesa Meniul iniţial. Evidenţiaţi pictograma (Setări) şi selectaţi apăsând butonul Disc (OK) de pe telecomandă. Imagine Sunet Programmes Reţea General Siguranţă Accesibilitate REŢEA Wi-Fi Reţea / PORNIT ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Adăugaţi o reţea fără fir ascunsă Conectare prin intermediul WPS PBC. Conectare prin intermediul WPS PIN. Setări Wi-Fi avansate Pentru punctul de acces fără fir (router) care are simbolul , trebuie să introduceţi cheia de securitate. 2 Evidenţiaţi pictograma (Toate setările) şi selectaţi apăsând butonul Disc (OK) de pe telecomandă. 5 În cazul în care conexiunea se realizează cu succes, este afişată reţeaua „Conectat la internet”. Imagine REŢEA Sunet Nume TV Programmes Neconectat [LG] WebOS TV WEBOS3.5 Conexiune cu fir (Ethernet) Conexiune Wi-Fi Reţea Toate setările General Conectat la internet Wi-Fi Direct LG Connect Apps Siguranţă 3 Selectaţi Reţea → Conexiune cu fir (Ethernet) sau Conexiune Wi-Fi. Imagine REŢEA Sunet Nume TV Programmes Neconectat General Puteţi verifica starea conexiunii în Setări Wi-Fi avansate. [LG] WebOS TV WEBOS3.5 Conexiune cu fir (Ethernet) Conexiune Wi-Fi Reţea Accesibilitate Neconectat Wi-Fi Direct LG Connect Apps Siguranţă Imagine Sunet Programmes Reţea Accesibilitate General 4 Dispozitivul încearcă automat să se conecteze la reţeaua disponibilă (mai întâi la reţeaua cu fir). Când selectaţi Conexiune Wi-Fi, este afişată lista de reţele disponibilă. Alegeţi reţeaua pe care doriţi să o utilizaţi. Siguranţă Accesibilitate REŢEA Wi-Fi Reţea / PORNIT ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Adăugaţi o reţea fără fir ascunsă Conectare prin intermediul WPS PBC. Conectare prin intermediul WPS PIN. Setări Wi-Fi avansate www.lg.com Depanarea problemelor de reţea 1 Apăsaţi butonul (ACASĂ) de pe telecomandă pentru a accesa Meniul iniţial. Evidenţiaţi pictograma (Setări) şi selectaţi apăsând butonul Disc (OK) de pe telecomandă. Verificaţi punctul de acces (router) sau consultaţi furnizorul dvs. pentru servicii de internet. Când X apare în dreptul Gateway: 1 Scoateţi din priză cablul de alimentare al punctului de acces (router) şi încercaţi conectarea după 5 secunde. 2 Iniţializaţi (resetaţi) punctul de acces (router). 2 Evidenţiaţi pictograma (Toate setările) şi selectaţi apăsând butonul Disc (OK) de pe telecomandă. 3 Contactaţi furnizorul de servicii de internet sau compania pentru punctul de acces (router). Când X apare în dreptul DNS: Toate setările 3 Selectaţi Reţea → Conexiune cu fir (Ethernet) sau Conexiune Wi-Fi → Setări Wi-Fi avansate. Imagine REŢEA Sunet Nume TV Programmes Neconectat General Sunet [LG] WebOS TV WEBOS3 Conexiune cu fir (Ethernet) Conexiune Wi-Fi Reţea Imagine Neconectat Wi-Fi Direct LG Connect Apps Programmes Reţea General REŢEA Wi-Fi Reţea / PORNIT ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Adăugaţi o reţea fără fir ascunsă Conectare prin intermediul WPS PBC. Siguranţă Siguranţă Accesibilitate Accesibilitate Setări Wi-Fi avansate Conectare prin intermediul WPS PIN. Urmaţi instrucţiunile de mai jos care sunt corelate cu starea reţelei dvs. Verificaţi televizorul sau punctul de acces (router). Când X apare în dreptul televizorului: 1 Verificaţi starea conexiunii televizorului, punctul de acces (router). 2 Opriţi şi porniţi televizorul, punctul de acces (router). 3 Dacă utilizaţi un IP static, introduceţi IP-ul direct. 4 Contactaţi furnizorul de servicii de internet sau compania pentru punctul de acces (router). 1 Scoateţi din priză cablul de alimentare al punctului de acces (router) şi încercaţi conectarea după 5 secunde. 2 Iniţializaţi (resetaţi) punctul de acces (router). 3 Verificaţi ca adresa MAC a televizorului/ punctului de acces (router) să fie înregistrată la furnizorul dvs. de servicii de internet. (Adresa MAC afişată pe panoul din dreapta al ferestrei cu starea reţelei trebuie să fie înregistrată la furnizorul de servicii de internet.) 4 Verificaţi site-ul web al producătorului punctului de acces (router) pentru a vă asigura că routerul dvs. are cea mai recentă versiune instalată. Instalarea şi setarea SmartShare PC SW 1 Instalaţi programul SmartShare PC SW pe PC. 2 Accesaţi www.lg.com. Apoi, selectaţi regiunea dvs. 3 Selectaţi SUPORT. Apoi, Selectaţi Drivers & Software, ACTUALIZARI SOFTWARE sau Software & Firmware. 4 Căutaţi modelul dvs. Apoi selectaţi SmartShare PC SW. 5 Puteţi rula programul când se încheie instalarea. NOTĂ yy Serviciul SmartShare este disponibil numai dacă televizorul şi celelalte dispozitive sunt conectate prin intermediul unui singur punct de acces (router). Conectarea SmartShare la smartphone 1 Asiguraţi-vă că funcţia Wi-Fi este activată pe smartphone-ul dvs. Pentru a utiliza SmartShare, ambele dispozitive trebuie să fie conectate la aceeaşi reţea locală. 2 Instalaţi/rulaţi aplicaţia pentru partajare de conţinut pe smartphone (Se numeşte LG TV Plus pe telefoanele LG). 3 Activaţi smartphone-ul pentru a partaja fişiere cu diferite conţinuturi cu alte dispozitive. 4 Deschideţi aplicaţia Conector dispozitiv. (ACASĂ) → Conector dispozitiv → Smartphone → PARTAJAREA CONŢINUTULUI. 5 Selectaţi tipul de fişier pe care doriţi să-l redaţi (video, audio sau fotografii). 6 Selectaţi fişierul video, de muzică sau fotografii care va fi redat pe televizor. 7 Redaţi fişierul media pentru a-l vizualiza şi a vă bucura de el pe televizor. Actualizarea firmware-ului televizorului * Dacă televizorul este pornit pentru prima dată după livrarea din fabrică, iniţializarea acestuia poate dura câteva minute. 1 (ACASĂ) → ACTUALIZĂRILE (Setări) → (Toate setările) → General → Despre acest TV → VERIFICAȚI 2 După verificarea versiunii software-ului, actualizaţi-l. Dacă bifaţi „Permite actualizările automate”, puteţi actualiza software-ul automat. Imagine Sunet Programmes Reţea General Siguranţă GENERAL Imagine Modul Eco Sunet Tastatură LG wireless Ajutor setări Economizor de ecran Resetare la setările iniţiale HDMI ULTRA HD Deep Colour xx.xx.xx Permite actualizările automate Programmes Reţea VERIFICAȚI ACTUALIZĂRILE Informaţii tv [LG] webOS TV WEBOS3.5 General Serviciu clienţi Acordurile utilizatorilor Siguranţă Despre acest TV Accesibilitate General / ꔐ Mobile TV pornit SIMPLINK (HDMI-CEC) DESPRE ACEST TV Versiune de software Accesibilitate Notă juridică Notificare software open source Setarea Wi-Fi Direct Wi-Fi Direct Imagine Reţea / Sunet REÎMPROSPĂTARE LISTĂ ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Programmes Reţea General (ACASĂ) → (Setări) → (Toate setările) → Reţea → Wi-Fi Direct Dacă nu este disponibilă o reţea locală, puteţi conecta un dispozitiv portabil direct la televizor, folosind Wi-Fi Direct. Cu SmartShare, puteţi partaja fişiere sau ecrane ale dispozitivelor conectate la Wi-Fi Direct. 1 Când deschideţi meniul Wi-Fi Direct, va apărea o listă de dispozitive disponibile. Siguranţă Accesibilitate 2 Când vi se cere să solicitaţi conectarea, selectaţi Da. Wi-Fi Direct este acum conectat la televizorul dvs. Setarea Miracast Miracast permite unui dispozitiv portabil să trimită în siguranţă materiale video şi sunet către televizor, fără cabluri. (ACASĂ)/ (INTRARE) → Screen Share 1 Miracast trebuie setat la „PORNIT” pe dispozitivul dvs. portabil. 2 Când televizorul este selectat, selectaţi dispozitivul pe dispozitivul dvs. portabil. După finalizarea conexiunii, ecranul dispozitivului apare pe ecranul televizorului. Prin comutarea Modului de ascultare la PORNIT după lansarea aplicaţiei Screen Share, puteţi conecta dispozitivul fără a porni aplicaţia Screen Share. Setarea WiDi (Wireless Display) Tehnologia WiDi (Wireless Display) de la Intel permite conectarea uşoară şi rapidă fără fire sau reţea de Internet pentru afişarea pe monitor dual sau în oglindă. Vă puteţi relaxa şi experimenta filmele dvs. preferate, clipurile video, fotografiile, emisiunile online şi mult mai multe în full HD pe televizorul dvs. cu o claritate excelentă a imaginii şi a sunetului. (ACASĂ)/ (INTRARE) → Screen Share 1 Intel's WiDi este setat la Pornit. Laptopul dvs. rulează programul Intel WiDi. 2 Detectează televizoarele LG webOS disponibile, care acceptă WiDi. Din listă, selectaţi televizorul dorit şi faceţi clic pe Conectare. Introduceţi numărul afişat pe ecran în câmpul de introducere ( ) de pe laptopul dvs. iar apoi faceţi clic pe Continuare. ******** Ecranul notebook-ului 3 Ecranul laptopului apare pe ecranul televizorului. Mediul wireless poate afecta afişajul ecranului. Dacă conexiunea este slabă, conexiunea Intel WiDi poate fi pierdută. * Televizoarele LG nu******** au nevoie de înregistrare. Apelaţi centrul de service pentru clienţi LG dacă întâmpinaţi probleme.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Home 59.9 cm (23.6") LED
- HD 1366 x 768 pixels 16:9
- 14 ms 200 cd/m²
- 22 W