LG SOUNDPLATE240 Owner's Manual

ENGLISH
MAGYAR
ČEŠTINA
OWNER’S MANUAL
HRVATSKI
SoundPlate 240
SRPSKI
SLOVENČINA БЪЛГАРСКИ МАКЕДОНСКИ
POLSKI
Please read this manual carefully before operating
your set and retain it for future reference.
ROMÂNÃ
SOUNDPLATE240
www.lg.com
LAP240-NB_DPOLLLK_ENG.indd 1
2014-03-17
12:23:16
1
2
Getting Started
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
NOTICE: For Product Identification and
Compliance/Safety labeling information please
refer to Main label on the bottom of unit.
LAP240-NB_DPOLLLK_ENG.indd 2
2014-03-17
12:23:17
Getting Started
This device is equipped with a portable battery or
accumulator.
Disposal of your old appliance
1.When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2.All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3.The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
4.For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
LAP240-NB_DPOLLLK_ENG.indd 3
2014-03-17
12:23:17
4
Getting Started
Europe Notice
1
Getting Started
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Please contact to the following address for
obtaining a copy of the DoC (Declaration of
Conformity).
Contact office for compliance of this product :
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
yy Please note that this is NOT a Customer Service
contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.
Indoor Use Only
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.
LAP240-NB_DPOLLLK_ENG.indd 4
2014-03-17
12:23:18
Table of Contents
5
Table of Contents
1
Getting Started
2
6
6
6
7
7
8
10
Safety Information
Unique features
Introduction
Accessories
Front panel
Rear panel
Remote control
Setting up the unit
2
Operating
13
13
13
14
15
16
16
19
Basic operations
– Optical input operation
– LG Sound Sync
– AUTO POWER On/Off
– Auto function change
Using Bluetooth technology
– Listening to music stored on the
Bluetooth devices
Using Bluetooth App
– Install “LG Bluetooth Remote” App
onto Your Bluetooth Device
– Activate Bluetooth with “LG Bluetooth
Remote” App
Setting sound effect
3
Troubleshooting
20
Troubleshooting
4
Appendix
21
22
23
23
Trademarks and licenses
Specifications
Maintenance
– Handling the unit
17
17
18
LAP240-NB_DPOLLLK_ENG.indd 5
1
2
3
4
2014-03-17
12:23:18
6
Getting Started
Unique features
1
LG Sound Sync
Getting Started
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Accessories
Please check and identify the supplied accessories.
Designs and specifications of the accessories are
subject to change without prior notice.
Bluetooth
Enjoys music from bluetooth device with simple
connection.
Remote Control (1)
Battery (1)
Power cord (1)
Cable ties for arranging
cables (2)
Cable holder (1)
Screw (2)
LG Bluetooth Remote
"LG Bluetooth Remote" is an App designed to
let you take control of some of LG’s latest Audio
devices.
Introduction
Symbols used in this manual
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
LAP240-NB_DPOLLLK_ENG.indd 6
2014-03-17
12:23:20
Getting Started
7
Front panel
1
Getting Started
A Remote sensor
B LED indicator
You can check the current state of the unit by the color LED on it. Refer to the table below.
LED Color
LED State
Red
Off
Orange
Green
White
Disconnected power cord
On
Standby
Bluetooth paired
Optical function
selected
LG sound sync
(LG TV) paired
Blink
(Twice rapidly)
Sound effect
(Standard) is
selected.
-
Sound effect
(Music) is
selected.
Sound effect
(Cinema) is
selected.
Blink
(Twice per second)
Booting
Bluetooth ready
-
LG sound sync
(LG TV) ready
Blink
(Once per second)
Mute
-
-
-
Rear panel
A 1/! (Standby/On)
o/p (Volume)
Adjusts speaker volume.
C AUTO POWER ON/OFF
Turns on or off AUTO POWER function.
D Optical input
F (Function)
Press it repeatedly to select other function.
B AC power input
LAP240-NB_DPOLLLK_ENG.indd 7
2014-03-17
12:23:21
8
Getting Started
Remote control
1
Getting Started
Switches the unit ON or OFF.
Reduce the sound volume.
Mutes or unmutes the sound.
Select LG TV function.
Select sound effect.
Increase the sound volume.
Select Optical function.
Select Bluetooth function.
,,Note
yy Once the unit is shut down to standby,
please wait several seconds before trying to
use remote again.
yy When you press any button on the remote
control, the red LED on the main unit blinks
twice. (Except 1(Power), SOUND EFFECT)
yy The red LED on Unit will be lit If the volume
level is adjusted between minimum to
maximum.
yy The color LED that indicates the current
function is lit up.
yy The red LED blinks twice rapidly when the
sound effect (Standard) is selected.
yy The green LED blinks twice rapidly when the
sound effect (Music) is selected.
yy The white LED blinks twice rapidly when the
sound effect (Cinema) is selected.
LAP240-NB_DPOLLLK_ENG.indd 8
2014-03-17
12:23:22
Getting Started
Battery installation
>>Caution
9
3. Put the battery cover on the remote control and
turn it clockwise to close.
Do not open the battery cover by using your
finger. Or else, your nail could break.
1
Getting Started
1. Turn the battery cover counterclockwise by
using a coin. Then remove the battery cover.
!Warning
yy DO NOT INGEST BATTERY. CHEMICAL BURN
HAZARD.
2. Insert and fix the battery with the minus (-)
facing in the same direction as the minus (-) on
the battery compartment.
+
LAP240-NB_DPOLLLK_ENG.indd 9
yy The battery used in this device may present a
fire or chemical burn hazard if mistreated. Do
not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of fire or explosion. Dispose of used
battery. Keep battery away from children. Do not
disassemble or dispose of in fire.
yy [The remote control supplied with] This product
contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead
to death. Keep new and used batteries away
from children. If the battery compartment does
not close securely, stop using the product and
keep it away from children. If you think batteries
might have been swallowed or placed inside
any part of the body, seek immediate medical
attention.
2014-03-17
12:23:23
10
Getting Started
Setting up the unit
1
This unit is designed to be positioned under your
TV.
Getting Started
Before setting up this system with your TV, make
sure your TV's specifications.
yy Weight
>>Caution
yy Do not try to set up this unit alone. It may
need at least 2 persons to lift your TV.
Otherwise it may result in a personal injury
and/or property damages.
yy Do not connect a CRT type TV to this unit.
Because this unit contains magnetic parts,
color irregularity may occur on the TV
screen.
yy Do not put the other objects except a TV or
a monitor on the unit.
yy The unit must be set up on a stable and
horizontal surface.
yy Do not put any other object between the
unit and the supporting furniture when you
set up the unit.
,,Recommendation
It is recommended to set up the unit on a
sufficiently firm and horizontal surface.
Max. 18 kg
1. Remove the protection caps for woofer from
the bottom of this unit.
yy Size of the base
2. Place the unit on the position where you want
to place your TV.
Max. 270 mm
Max. 530 mm
LAP240-NB_DPOLLLK_ENG.indd 10
2014-03-17
12:23:24
Getting Started
3. Connect the optical cable and the power cord
to the unit.
11
,,Note
You can arrange the cables of the unit.
1. Fix the cable holder with screws.
1
Getting Started
2. Arrange the cables as the below.
4. Connect another end of optical cable
connecting the unit to your TV.
5. Place your TV on the centre of the unit.
6. Plug in the power cord of the unit.
LAP240-NB_DPOLLLK_ENG.indd 11
2014-03-17
12:23:26
12
Getting Started
>>Caution
1
yy Do not place your TV on the edge of this
unit. Otherwise it may result in a personal
injury and/or property damages.
How to Affix the Ferrite Core
(Optional)
You may need to attach Ferrite core in order to
reduce or eliminate any electrical interference.
Getting Started
1. Open
yy If your TV is over recommended weight
(max 18 kg) or has a Base larger in area than
the Unit do NOT place TV on the Unit.
2. Wind (Once)
-- In this case, it is recommended to place this
system in another location such as on the
shelf under the TV.
3. Close
LAP240-NB_DPOLLLK_ENG.indd 12
2014-03-17
12:23:29
Operating
Basic operations
Optical input operation
,,Note
-- Mute your TV.
-- Select [Off ] on the TV sound setup menu
not to output the sound through the TV.
-- Select [Optical output] on the TV sound
setup menu to listen to the sound through
this unit.
1. Connect your TV to the unit by using an optical
cable. (Refer to the pages 10 - 11.)
2. Turn on the unit by pressing 1 (Power) on the
remote control.
3. Select OPTICAL function by using OPTICAL on
the remote control.
Green LED on the unit is lit up and you can
listen to the TV's sound.
,,Note
yy Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
LG Sound Sync
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending
on the capabilities of your equipment.
2
Operating
Before operating this Unit it is advised to turn
OFF TV speaker Sound as it may create sound
differences between the 2 products running
simultaneously.
Refer to TV menu/Specifications and select
from below methods :
13
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
yy When the connections failed, make sure of
the condition of the TV and power of it.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turned off the unit.
-- Changing the function to the others.
-- Disconnecting the optical cable.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy The amount of time to turn off this unit is
different depending on your TV when you
set AUTO POWER function to ON.
yy Volume controls differ slightly depending
on what you use among the supplied
remote control, LG TV's remote control or “LG
Bluetooth Remote” app.
LAP240-NB_DPOLLLK_ENG.indd 13
2014-03-17
12:23:29
14
2
Operating
With wired connection
AUTO POWER On/Off
1. Connect your LG TV to the unit by using an
optical cable. (Refer to the pages 10 - 11.)
This unit automatically turns on by an input source :
Optical, LG TV or Bluetooth.
2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]
When you turn on your TV or an external device
connected to this unit, this unit recognizes the
input signal and select the suitable function. You
can hear the sound from your device.
3. Turn on the unit by pressing 1 (Power) on the
remote control.
If you try to connect your Bluetooth device, this unit
turns on and ready to pair. Connect your Bluetooth
device and play your music.
Operating
4. Select OPTICAL function by using OPTICAL on
the remote control.
Green LED on the unit is lit up and you can
listen to the TV's sound.
With wireless connection
1. Turn on the unit by pressing 1 (Power) on the
remote control.
2. Select LG TV function by using LG TV on the
remote control. Then white LED on the unit
starts to blink.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Wireless)]
When connection is completed normally
between this unit and your TV, white LED on
the unit is lit up.
,,Note
yy If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will
be disconnected. To use this function again,
you should reconnect the TV and the unit.
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
yy The device with Bluetooth® wireless
technology will be disconnected, if Sound
Sync function is selected. “LG Bluetooth
Remote” app you’ve already connected is
disconnected either.
LAP240-NB_DPOLLLK_ENG.indd 14
You can turn on or off AUTO POWER function by
using AUTO POWER ON/OFF switch on the rear
panel of the unit.
,,Note
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the TV connected by LG Sound Sync
(Optical/Wireless).
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
yy AUTO POWER function is initially turned on.
yy If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned
on by AUTO POWER function when optical
signal comes in after 5 seconds of no signal.
yy Depending on the connected device, this
function may not operate.
yy When booting this unit on LG TV fucntion,
it takes about 25 seconds to turn it on and
the red LED is blinking twice per second.
During that time, you cannot control this
unit except turn it off.
yy If you used Bluetooth or LG TV function
before turning off this unit, the unit keeps
the current function when Bluetooth or LG
TV signals comes in.
Besides, if you used optical function, this
unit turns on Bluetooth function when LG
TV signal comes in.
2014-03-17
12:23:29
Operating
15
Auto power down
This unit will turn itself off to save electric
consumption in the case were main unit is not
connected to external device and is not used for
20 minutes.
Auto function change
This unit recognizes Bluetooth or optical signals
and changes suitable function automatically.
2
Operating
When optical signal comes in
When you turn on the external device connected
to this unit by an optical cable, this unit change the
function to optical. You can hear the sound from
your device.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
,,Note
yy To change to optical function, it needs 5
seconds of no signal.
yy If you are using LG TV function, this unit
does not react to the Bluetooth connection.
LAP240-NB_DPOLLLK_ENG.indd 15
2014-03-17
12:23:30
16
Operating
Using Bluetooth
technology
About Bluetooth
Bluetooth is wireless communication technology
for short range connection.
2
Operating
The sound may be interrupted when there is
interference by the other electronic waves which
run on same frequency or if you connect bluetooth
devices in the other rooms nearby.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA etc.
Bluetooth profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music stored on
the Bluetooth devices
Pairing this unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using h on
the remote control. Then the orange LED on the
unit starts to blink.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG SOUND PLATE
(XX:XX)”.
,,Note
yy XX:XX means the last four digits of BT
address. For example, if your unit has a
BT address such as 9C:02:98:4A:F7:08,
you will see “LG SOUND PLATE (F7:08)” on
your Bluetooth device.
yy Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
3. The orange LED is lit up when this unit
successfully paired with your Bluetooth device.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
LAP240-NB_DPOLLLK_ENG.indd 16
2014-03-17
12:23:30
Operating
,,Note
yy When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-- There is a obstacle between the unit and
the bluetooth device.
yy This unit supports Bluetooth auto pairing.
However it does not operate in the case
below :
-- When you restart this unit.
-- When you return to Bluetooth function
after using LG TV function.
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
Using Bluetooth App
,,Note
Only Android OS is available to use “LG
Bluetooth remote” app with this unit.
About “LG Bluetooth Remote” App
“LG Bluetooth Remote” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “LG Bluetooth Remote”
app.
2
Operating
-- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
17
Install “LG Bluetooth Remote”
App onto Your Bluetooth
Device
There are two ways to install“ LG Bluetooth Remote”
App onto Your Bluetooth Device.
Install “LG Bluetooth Remote” App
through QR code
1. Install “LG Bluetooth Remote” app through QR
code. Use the scanning software to scan the QR
code.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy The more distant between the unit and
the bluetooth device, the lower the sound
quality becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the bluetooth
device gets far from the unit.
yy When Bluetooth connection is
disconnected, connect the bluetooth device
to the unit again.
yy When not connected the Bluetooth, orange
LED is blinking.
LAP240-NB_DPOLLLK_ENG.indd 17
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device has a
scanning software application. If you don’t
have one, download one from “Google
Android Market (Google Play Store)”.
2014-03-17
12:23:30
18
Operating
Install “LG Bluetooth Remote” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “LG Bluetooth
Remote” and search it.
2
Operating
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Activate Bluetooth with “LG
Bluetooth Remote” App
“LG Bluetooth Remote” app helps to connect your
bluetooth device to this unit.
1. Tap “LG Bluetooth Remote” app icon on the
home screen to open “LG Bluetooth Remote”
app, and go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
,,Note
yy “LG Bluetooth Remote” app will be available
in the software version as follow;
-- Android O/S : Ver 2.3.3 (or later)
yy This unit does not support the multi-pairing.
If this unit is already connected with other
Bluetooth device, disconnect that device
and then try again.
yy If you use “LG Bluetooth Remote” app for
operation, there would be some differences
between “LG Bluetooth Remote” app and the
supplied remote control. Use the supplied
remote control as necessary.
yy Depending on the Bluetooth device, “LG
Bluetooth Remote” app may not work.
yy After connection of “LG Bluetooth Remote”
app, music may be output from your device.
In this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “LG Bluetooth Remote”
app, “LG Bluetooth Remote” app may
operate abnormally.
yy When “LG Bluetooth Remote” app operate
abnormally, check your Bluetooth device
and the connection of “LG Bluetooth
Remote” app and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “LG
Bluetooth Remote” operation.
yy If you select Bluetooth function after
“LG Bluetooth Remote” app has been
disconnected, this unit and your Bluetooth
device will be paired automatically but you
cannot control this unit by “LG Bluetooth
Remote” app. To use “LG Bluetooth Remote”
app, reconnect the app.
yy Even though Bluetooth connection will be
disconnected, you can use “LG Bluetooth
Remote” app when you change the function
to the others except LG TV function.
LAP240-NB_DPOLLLK_ENG.indd 18
2014-03-17
12:23:30
Operating
19
Setting sound effect
This system has a number of pre-set surround
sound fields. You can select a desired sound
mode by using SOUND EFFECT. A color LED that
indicates the sound effect you select will blink
rapidly twice.
The displayed items for the equalizer may be
different depending on sound sources and effects.
LED
blinking
Standard
Red
You can enjoy the
sound without
equalizer effect.
Music
Green
You can enjoy
comfortable and
natural sound.
White
You can enjoy more
immersive and
cinematic surround
sound.
Cinema
2
Operating
Sound
effect
Description
,,Note
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
yy You may need to reset the surround mode,
after switching the input, sometimes even
after the sound file changed.
LAP240-NB_DPOLLLK_ENG.indd 19
2014-03-17
12:23:30
20 Troubleshooting
Troubleshooting
PROBLEM
No Power
CAUSE & CORRECTION
yy The power cord is unplugged.
Plug in the power cord.
yy Check the condition by operating other electronic devices.
yy Incorrect input source is selected.
Check the input source and select the correct input source.
No sound
yy The mute function is activated.
Press i or adjust the volume level to cancel the mute function.
yy When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device.
3
Troubleshooting
yy The remote control is too far from the unit.
Operate the remote control within about 7 m.
The remote control
does not work
properly.
yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
yy The battery in the remote control is exhausted.
Replace the battery with new one.
yy
The Auto power
on/off function does yy
not work.
yy
Check connection of the external device such as TV, DVD/Blu-Ray player or
Bluetooth device.
Depending on the connected device, this function may not operate.
Check the status of AUTO POWER ON/OFF switch on the rear panel of the unit.
yy Check whether your LG TV supports LG Sound Sync.
LG Sound Sync does
not work.
yy Check connection of LG Sound Sync (Optical or wireless).
yy Check sound setting of your TV and this unit.
Check the details below and adjust the unit according to them.
When you feel the
output sound of the
unit is low.
yy With the unit connected with TV, change the AUDIO DIGITAL OUT setting on TV
Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
yy With the unit connected with Player, change the AUDIO DIGITAL OUT setting on
Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
There is a noise on
the periphery of the
unit.
LAP240-NB_DPOLLLK_ENG.indd 20
Depending on the type of the furniture where the unit is placed, you might hear a
slight noise from the furniture due to the dual subwoofers built within the product.
yy Check the supporting furniture whether it is sufficiently firm and horizontal.
yy However, if you still hear a noise, place a tablecloth between the unit and the
surface.
2014-03-17
12:23:30
Appendix
21
Trademarks and
licenses
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0
Channel is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
4
Appendix
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
LAP240-NB_DPOLLLK_ENG.indd 21
2014-03-17
12:23:32
22 Appendix
Specifications
General
Power requirements
Refer to the main label on the unit.
Power consumption
Refer to the main label on the unit.
Dimensions (W x H x D)
(560 x 54.5 x 320) mm (With foot)
Net Weight (Approx.)
4.4 kg
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 90 %
Inputs
DIGITAL IN (OPTICAL IN)
3.3 V (p-p), Optical jack
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
4
Amplifier
Appendix
Total output
100 W
Stereo mode
20 W x 2 (at 1 kHz, 8 Ω)
Surround mode
20 W x 2 (at 1 kHz, 8 Ω)
Built-In subwoofer
20 W (at 100 Hz, 8 Ω)
THD
0.1 %
yy Designs and specifications are subject to change without prior notice.
LAP240-NB_DPOLLLK_ENG.indd 22
2014-03-17
12:23:32
Appendix 23
Maintenance
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
4
Appendix
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
LAP240-NB_DPOLLLK_ENG.indd 23
2014-03-17
12:23:32
LAP240-NB_DPOLLLK_ENG.indd 24
2014-03-17
12:23:32