LG V180, V1802P2Z User guide

LG V180, V1802P2Z User guide
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
V180
PAL
ENGLISH
Before
connecting, operating or adjusting this
product, please read this instruction booklet carefully
and completely.
Precautions
Safety
SERIAL NUMBER: The serial number is found
CAUTION
on
the back
of this unit. This number is
unique to this unit and not available to others. You should record requested information
here and retain this guide as a permanent record of your
purchase.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
Model No.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
Serial No.
___________________________________
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
___________________________________
of your old
Disposal
appliance
1. When this crossed-out wheeled bin
attached to
ered
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
by
the
symbol is
product is cov-
product it means the
European Directive 2002/96/EC.
a
2. All electrical and electronic
products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities.
electric shock to persons.
3. The correct
The exclamation mark within
an
equilateral
disposal of your old appliance will
help prevent potential negative consequences
trian-
for
the environment and human health.
gle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product.
4. For
more
detailed information about
your old
appliance, please contact
waste disposal service or the shop
chased the product.
disposal of
your city office,
where you pur-
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
and to
from
The
uct
openings
ensure
in the cabinet
reliable
heating.
openings should
operation
on a
bed, sofa, rug
should not be
placed
never
or
in
a
the Power Cord
appliances recommend they
dedicated circuit;
provided for ventilation
the product and to protect
That
ance
are
of
it
over
be
concerning
Most
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and
CAUTION
be blocked
other similar
by placing the prodsurface. This product
built-in installation such
rack unless proper ventilation is provided
facturer's instruction have been adhered to.
case or
as a
or
book-
the
manu-
be
placed upon
a
outlet circuit which powers only that appliand has no additional outlets or branch circuits.
is,
single
a
Check the
specification page
of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall
outlets, loose
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock
or fire. Periodically examine the cord of your appliance, and
if its appearance indicates damage or deterioration, unplug
it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized
or
services.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
CAUTION:
This
Player employs a Laser System.
To ensure proper use of this product, please read this
owner's manual carefully and retain for future reference,
should the unit require maintenance, contact an authorized
service location-see service procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazDigital
Video Disc
ardous radiation exposure.
To prevent direct exposure to laser
beam, do
not
try
to
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
2
To disconnect power from the
cord plug. When installing the
plug
is
easily
mains, pull
product,
outlets,
out the mains
ensure
that the
accessible.
This
product
is manufactured to
radio interference
open the enclosure. Visible laser radiation when open. DO
NOT STARE INTO BEAM.
CAUTION: The
walked upon. Pay particular attention to plugs, wall
and the point where the cord exits the appliance.
TIVE
requirements
comply
with the
of EEC DIREC-
89/336/EEC, 93/68/EEC and 73/23/EEC.
Table of Contents
Introduction
Operation
SafetyPrecautions.........................2
Operationwithtape.....................20-24
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
OPR (Optimum Picture Response).
20
InstantTimerRecording...................21
Timer recording using On Screen Display
22-23
.24-26
AdditionalOperation-VCRpart.
Hi-FiStereoSoundSystem................24
OnScreenDisplay(F.OSD)................24
TapeCounterMemoryStop................24
TableofContents..........................3
BeforeUse..............................4-5
AbouttheSymbolDisplay..............4
SymbolusedinthisManual...............4
NotesonDiscs.........................4
HandlingDiscs.........................4
StoringDiscs..........................4
CleaningDiscs.........................4
.4
SelectingtheViewingSource.
TypesofPlayableDiscs...................5
RegionalCode..........................5
.
.
.
.
.
.
.
.
.
.
.
.
FrontPanel...............................6
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
9
Connecting to a TV & Decoder(or Satellite)
.10
ConnectingtoOptionalEquipment.
.11-15
BeforeOperation-VCRpart.
.11
TuninginavideochannelonyourTV.
.11
UsingyourVCRfortheveryfirsttime.
SettingtheclockManually.................12
Tosetthecoloursystem..................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.13
TuninginTVStationsAutomatically.
.14
TuninginTVStationsManually.
.15
ChangingtheorderofTVStations.
DeletingTVStations.....................15
.16-19
BeforeOperation-DVDpart.
16
Displaying Disc Information on-screen
InitialSettings..........................16
GeneralOperation.......................16
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder.......................24
.25
VideoDoctor(Self-Diagnosis).
Lock(ChildLock)........................25
.25
WideScreenCompatibility16:9.
1WMode(Powersavemode)..............25
26
Recording from External Components
CopyingfromDVDtoVCR.................26
General Playback features DVD Part
27-28
PlayingaDVDorVideoCD..................28
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
-
.
.
.
.
.
.
.
Additionalfeatures.......................28
3DSurround........................28
.
Howtousethemainmenu.................13
.
.
.
.
.
.
.
TimeSearch........................28
MarkerSearch......................28
LastSceneMemory..................28
ScreenSave........................28
.29
PlayinganAudioCDorMP3/WMAfile
ProgrammedPlayback....................29
.29
RepeatProgrammedTracks.
.29
ErasingaTrackfromProgramList.
.29
ErasingtheCompleteProgramList.
ViewingaJPEGfile.......................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow.............................30
.
StillPicture............................30
MovingtoanotherFile....................30
LANGUAGE............................17
Zoom.................................30
MenuLanguage......................17
Torotatepicture.........................30
PlayingaDivXMoviefile...................31
PlayingaDVDVRformatDisc...............32
AdditionalOperation.......................33
33
Controlling other TVs with the remote control
DiscAudio/Subtitle/Menu.
.
.
.
.
.
.
.
.
.
.
.
.17
DISPLAY..............................17
TVAspect..........................17
DisplayMode........................17
ProgressiveScan.....................17
TVOutputSelect.....................17
AUDIO................................18
.
.
.
MaintenanceandService..................33
Reference
.18
DolbyDigital/DTS/MPEG.
SampleFreq.(Frequency)..............18
.18
DRC(DynamicRangeControl).
LanguageandAreaCodeList...............34
LanguageCodeList......................34
Vocal..............................18
Troubleshooting..........................35
Specification.............................36
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LOCK(ParentalControl)..................18
Rating.............................18
Password(SecurityCode)..............18
AreaCodeList..........................34
AreaCode..........................19
OTHERS..............................19
PBC..............................19
AutoPlay..........................19
DivX(R)VOD........................19
3
Introducin
Before Use
To
proper use of this product, please read this
owner's manual carefully and retain for future reference.
Notes
on
This manual
Handling
Discs
ensure
provides
information
on
the
and
operation
the unit require
maintenance of your DVD player. Should
service, contact an authorized service location.
About the
"
Discs
Do not touch the
by
the
edges
so
playback side of the disc. Hold the disc
that fingerprints do not get on the sur-
face. Never stick paper
or
tape
on
the disc.
Symbol Display
"
may appear on your TV
and indicates that the function
manual is not available
Symbol
on
display during operation
explained in this owner's
that specific DVD video disc.
Used in this Manual
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
applicable only
making
of the
following symbols
represented by the symbol.
one
to the disc
the task easier.
ALL
All discs listed below
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
ACD
Audio CDs
is
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the
center out.
Do not
MP3
MP3 files
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
WMA
WMA files
spray intended for older
DivX
DivX files
use
Selecting
the
You must select
VCR)
to view
vinyl
records.
Viewing Source
of your output
the TV screen.
one
on
sources
(DVD
or
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
lights
TV
and
output
source
of DVD deck is viewed
on
the
screen.
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
lights
TV
and
output
source
of VCR deck is viewed
on
the
screen.
Notes:
?
?
If you insert a disc while this unit is in the VCR
this unit will switch to DVD mode automatically.
If you insert a cassette tape without prevention tab
while this unit is in the DVD mode, this unit will switch
to VCR mode
4
mode,
automatically.
Before Use
of
Types
(Continued)
Playable
Notes
Discs
on
Copyrights:
It is forbidden
by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy
protection function developed by Macrovision. Copy protection signals are recorded on some discs. When
recording and playing the pictures of these discs picture
noise will appear. This product incorporates copyright
protection technology that is protected by method
DVD
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
claims of certain U.S.
property rights
In
addition, this unit plays DVD±R/RW, CD-R/RW and
SVCD that contains audio titles, DivX, MP3, WMA,
and/or JPEG files.
This indicates
feature that is
product
a
of
playing DVD-RW
Recording format.
capable
discs recorded with Video
other
owned
patents and other intellectual
by
Macrovision
and
Corporation
Use of this copyright protection
authorized by Macrovision
rights owners.
technology must be
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
Notes:
?
?
DEFINITION TELEVISION SETS ARE FULLY COMPAT-
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Do not
use
shaped
or
on
irregularly shaped CDs (e.g., heartoctagonal) since they may result in mal-
functions.
?
This unit
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 625 PROGRESSIVE SCAN PICTURE
IT IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE 'STANDARD DEFINITION'
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
625p
requires
discs and
recordings
to meet
cer-
PROBLEMS,
DVD
PLAYER, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
tain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
are
optimal
automatically
many different types
of recordable disc formats (including CD-R containing
MP3
or
WMA
are
and these
require certain pre(see above) to ensure compatible
files)
existing conditions
playback.
Customers should note that
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
This unit has
unit. This unit
rear
Notes
?
regional code printed on the rear of the
can play only DVD discs labelled same as
or
Regional
"ALL".
Codes
Most DVD discs have
bers in it
clearly
a
visible
must match your unit's
not play.
?
owner.
a
of the unit
on
copyright
Code
Regional
the
from the
sought
globe
on
the
with
one or more num-
cover.
regional
code
This number
or
the disc
can-
If you try to play a DVD with a different regional code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
5
Introducin
Front Panel
1234
5
678
DVD
1.
Disc
6.
disc here.
a
7.
Switches the unit to ON
PROG.
OFF.
Opens
Selectors.
9.
closes the disc
window
Indicates
:
:
Progressive
:
Starts
Scan is set to On mode.
recording
or a
timer
:
Indicates total
6
tape.
tape forwards.
Notes
on
14. Video IN Jack
page
21.)
playing time/elapsed
time/current time.
search. Winds the
DVD/VCR Selector
DVD to VHS copy is in progress.
(See
reverse
chapter/track.
13. DVD/VCR
engaged.
TV: Indicates TV mode.
fast
11. M/>
Stops playback.
VCR: VCR deck is selected.
is
to
playback.
12. x
programmed.
recording
a
Press and hold for two seconds for
A Cassette is in the VCR deck.
REC: VCR
or
chapter/track.
Go to NEXT
engaged.
DVD+VCR is in timer
is
chapter/track
10. N
repeat mode.
Child Lock is
recording
of current
search. Rewinds the
A disc is loaded in the DVD deck.
Indicates the
beginning
Press and hold for two seconds for
DVD: DVD deck is selected.
:
./m
PREVIOUS
tray.
Shows the current status of the unit.
[P]:
VCR
Go to
Display
:
Tape Compartment
Tape Eject
Programme
or
/
/
Remote Sensor
8.
DVD
4.
5.
or
(V/v)
Channel
15
Point the remote control here.
1/I
2.
3.
VCR
Tray
Insert
91011121314
15. Audio IN
(L/R)
Jacks
a
fast forward
Remote Control
POWER
Switch this unit ON
TV Control Buttons
OFF.
or
TVPOWER:Turns
DVD/VCR select button
Selects
operational
mode of
TV VOL +/--:
tray.
a menu.
FGDE(left/right/up/down)
Select
STOP
mode, for fast
To control vertical tremble
into
picture
tape.
Access
tape during the
Access
Select
menu.
the
of
menu
a
video CD
an
audio
language (DVD).
SUBTITLE
Select
subtitle
a
language.
ANGLE
Select DVD
camera
angle
if available
ZOOM
Enlarge
video
REC/ITR
image.
(O)
Record your input sources into
LOCK (Child Lock)
Switch the Child Lock
on
tape.
and off.
TITLE
Display
the title
menu
of the disc if
available.
menu.
PROGRAM
CLEAR
Access
the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
or remove
menu.
program
A-B/LP
Repeat
sequence.
Select the recording
speed
of the
tape.
REPEAT
Repeat chapter, track, title,
setup
AUDIO
SEARCH
on
DVD disc.
with PBC.
point during playback.
track number
a
or remove
Displays
MARKER
a
of
RETURN
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous
chapter or track.
PAUSE/STEP (X)
Pause playback temporarily / press
repeatedly for frame-by-frame
playback.
PLAY (N)
Starts playback.
STOP(A)
Stops playback.
Clear
menu
SETUP/ i
reverse
MARKER SEARCH
selection.
menu
DISC MENU
search.
Display
still.
Acknowledge
forward.
or
during
ENTER/OK
picture
search and Advances the tape during
the STOP mode, fast forward picture
Mark any
menu.
recording
(m/M)
VCR: Rewinds the
item in the
Select channel programme of VCR.
To adjust tracking.
BACKWARD / FORWARD
DVD: Search backward
an
PR/TRK(+/-)
AV
for
or
counter.
Switch between your TV's tuner
and the VCR's internal tuner.
source
Introducin
Display.
Shows you the current time
TV/VCR
input
TV's volume.
Access the On-Screen
0-9 numerical buttons
Select
Adjusts
CLK/CNT
Tape Eject.
Select numbered items in
source.
DISPLAY
EJECT
close the disc
33)
TV PR +/--: Selects TV's channel.
OPEN/CLOSE
or
p.
offtheTV.
on or
TV AV: Selects the TV's
remote control.
Open
(see
RANDOM/CM SKIP
all.
Play
tracks in random order.
CM SKIP
Remote Control
Remote control
Operation
Point the remote control at the remote
and press
sensor
Detach the
the buttons.
AAA AAA
Do not mix old and
new
batteries and
different
types of batteries such
alkaline,
etc.
as
never
mix
battery
installation
battery
cover on
the
rear
of the
control, and insert two batteries (size
AAA) with 3 and # aligned correctly.).
remote
standard,
7
Rear Panel
AERIAL
Connect the aerial
using
this
jack.
VIDEO/AUDIO
Connect to
a
OUT(Left/Right) (DVD/VCR OUT)
TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
(Y
Pb
Pr)
OUT)
TV with Y Pb Pr
inputs.
AUDIO OUT
Connect to
(Left/Right) (DVD EXCLUSIVE OUT)
an amplifier, receiver or stereo system.
EURO AV2 DECODER
Connect to
pay-TV
decoder
another video recorder.
or
AC Power Cord
Connect to
EURO AV1 AUDIO/VIDEO
Connect to your TV set
COAXIAL
Connect
Do not touch the inner
Electrostatic
8
discharge
pins
may
using
this
of the
cause
or
IN+OUT / DVD
jack.
jacks
the
panel.
permanent damage to the
on
rear
unit.
power
OUT)
another video recorder.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
to digital (coaxial) audio equipment.
RF.OUT
Connect to your TV
(VCR
a
source.
Connections
Caution:
Make
DVD exclusive out connection
sure
this unit is connected
the TV to the correct video
input
channel.
in
jack (record deck)
Connecting to
(or Satellite)
Make
the
of your audio
to the
TV & Decoder
2.
on
the SCART
lead
input
on
the
socket
rear
on
the
Some TV broadcasters transmit encoded television
to this unit
purchased
a
or
decoder
(S2).
a
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
1.
or
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT
Connect the VIDEO
(DVD/VCR OUT) jacks on the
DVD Player to the corresponding in jacks on the TV
using the video cable (V).
Connect the Left and Right or AUDIO (DVD/VCR
OUT) jacks of the DVD+VCR to the audio left/right in
jacks on the TV using the audio cables (A1).
Note:
sponding
2.
in
jacks on the DVD Player
jacks on the TV using the
Connect the Left and
MIERE)
are
signals (CANAL+
not decoded in the 1W Mode
Basic connection
or
PRE-
(see
p.
25).
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel of
corre-
Y Pb Pr cable.
Right AUDIO OUT jacks of
left/right in jacks on the TV
this unit to the audio
using
to the
the
the audio cables.
Notes:
Set the
The encoded television
1.
Scan connection
high-definition or "digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
resolution possible.
(S1).
which you can only see with a
rented decoder. You can connect such
2.
jacks on the DVD Player to the
corresponding in jacks on the TV using the Y Pb Pr
cable (C).
Connect the Left and Right AUDIO OUT jacks of this
unit to the audio left/right in jacks on the TV using
the audio cables (A2).
If your television is
signals
1.
Connect the COMPONENT/PROGRESSIVE SCAN
Progressive
(AV)
Connect the EURO AV1 AUDIO/VIDEO
(descrambler)
connection
VIDEO OUT
system.
of the
panel of this unit to
TV using a SCART
2.
jack
following connections, depending
capabilities of your existing equipment.
one
Basic connection
1.
a
Component Video
1.
Do not connect this unit's AUDIO OUT
phone
to the TV. Set
directly
Progressive to "On" on the setup
progressive signal, see page 17.
does not work with the
Progressive
scan
connections
(yellow VIDEO
OUT
menu
for
analog
video
jack).
Rear of TV
AERIAL
VIDEO
INPUT
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
AUDIO INPUT
SCART INPUT
this unit.
Pr
2.
Connect the
RF.OUT
supplied
jack
on
the
Y
panel
Input (R).
C
VIDEO
INPUT
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pr
R
Pb
Y
L
of this unit to your
Rear of TV
AERIAL
R
RF antenna cable from the
rear
television's Antenna
Pb
SCART INPUT
AUDIO INPUT
L
A2
R
VA 1
Decoder
(or Satellite)
S1
S2
Rear of this unit
Rear of this unit
(DVD
exclusive out
connection)
(Basic connection)
9
Prepa tion
Connections
Connecting
to
(Continued)
Optional Equipment
Rear of this unit
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
Connect the Left and
AUDIO OUT
Right
DVD/VCR AUDIO OUT
or
OUT) jacks on this
to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
(DVD
EXCLUSIVE
unit
Connecting to an amplifier equipped with two channel
digital stereo (PCM) or to an Audio/ Video receiver
equipped with a multi-channel decoder (Dolby
DigitalTM, MPEG 2 or DTS)
1.
Connect
one
of this unit's DIGITAL AUDIO OUT
(COAXIAL) to
amplifier. Use
the
an
jack
or
DVD exclusive out
DVD/VCR OUT
corresponding in jack on your
optional digital (coaxial) audio
cable.
2.
You will need to activate this unit's
"AUDIO"
(See
Digital
on
page
digital output.
18).
Multi-channel sound
COA
A
multi-channel connection
digital
sound quality.
provides
the best
For this you need a multi-channel
Audio/Video receiver that supports one or more of the
supported by your unit (MPEG 2, Dolby
DTS). Check the receiver manual and the
L
IAL
DIGITAL INPUT
R
AUDIO INPUT
Amplifier (Receiver)
audio formats
Digital and
logos on the
front of the receiver.
Digital multi-channel connection
(DVD exclusive out connecttion)
Warning:
Due to the DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
will be in DTS
selected.
Notes:
If the audio format of the
the
capabilities of
produce a strong,
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Manufactured under license from
"Dolby",
"Pro
trademarks
Logic" and the
of Dolby Laboratories.
DTS and DTS
Theater
10
Dolby Laboratories.
double-D symbol are
Digital Out
Systems, Inc.
are
trademarks of
Digital
Rear of this unit
Before
Operation-VCR part
in
Tuning
a
video channel
on
your
TV
your VCR for the very first
time
Video channel
which your TV
the DVD+VCR
(RF output channel) is the channel
receives picture and sound signals
through the RF cable.
If you have used
TV,
tune your
channel is
back
Using
on
on
from
SCART lead you will not have to
simply select the AV channel. The AV
a
for
already pre-tuned
optimum
video
play-
Following picture will display on the
you have just connected your video
TV
screen
when
recorder for the
very first time.
To make
as
tuning
TV
shown "ACMS"
stations, please follow stages
3 to 4
(see p.13).
your TV.
Perform the
following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connection to AV
connection,
or
vise
1.
Turn
2.
Set the vacant
position
3.
Press POWER
on
on
DDKEFI
PSSFOTHERS
OKi
36
on
your TV.
clock indicator will be
Press and hold PROG.
more
Pr-12
CH
the remote control to enter the
by mode (the
dimmed).
for
NN L
ACMS
versa.
B
DVD+VCR and TV.
stand
4.
A
(v
or
V)
on
the DVD+VCR
than 4 seconds.
RF 36 will appear in the display.
The following picture will be displayed
on
the TV
screen.
RF
If the
is
5.
CHANNEL
36
is snowy, move to step 5. If the picture
press POWER on the DVD+VCR to finish.
picture
clean,
Press PROG.
(v
video channel to
68 which is not
or
V)
on
the DVD+VCR to set the
position between 22 and
occupied by any local station in your
a
vacant
area.
Note:
The RF channel will not
change
until
step
6 has
been executed.
6.
Press POWER to store the
new
into the DVD+VCR memory.
Now tune your TV set to the
RF video channel
new
DVD+VCR RF
channel.
Note
If the TV
picture
was
clear in
step 4, do
not retune your
TV.
11
Prepa tion
Before
Setting
Operation-VCR part
the clock
To set the colour system
Manually
The clock in your DVD+VCR controls time and date settings for your DVD+VCR.
1.
Press i.
Press b
or B
1.
Press i.
2.
The main
3.
Press 1
or
2 to select the SYS and press
ENTER/OK.
4.
Press 3
or
to select SET.
Press ENTER/OK.
menu
will appear
4 to select
on
the TV
according
screen.
to the COLOUR
system used.
HHMMDDMMYY
--
:.
-
-
--
--
--
---
.
12
SYS
OK i
SET
SYS
fOSD
ON
OFF
2.
Use the v
or
V on
the remote control to alter the
5.
HOURS, MINUTES, DAY, MONTH and YEAR.
of the week will appear
you enter the year.
day
automatically
Press 2 to select the RF AUDIO.
Press 3
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The
i
or
4 to select
according
to the RF AUDIO
used.
when
SYS
SYS
fOSD
ON
OFF
HHMMDDMMYY
8
:.
0010106SUN
.
12
6.
OK i
SET
3.
If you make a mistake press b
correct details.
4.
Press i to return to
12
i
a
TV
or B
picture.
and enter the
Press i to
remove
the
menus
from the TV
screen.
Before
Operation-VCR part
How to
This DVD+VCR
menus
The
the main
use
displayed
menus are
be
easily
can
Tuning
menu
programmed by using
the
on screen.
controlled
by
the Remote Control
Handset.
1.
2.
in TV Stations
If the TV broadcast
Automatically
is weak your DVD+VCR may
not detect the necessary information and will not be able
to store them correctly. To overcome this problem please
signal
turn to the MANUAL TUNING section
Switch
your TV set and DVD+VCR
POWER button.
by pressing
on
the
1.
Press POWER to turn
2.
Press i button.
Press i button.
The main
will appear
menu
the TV
on
on
page 14.
on
The main menu will appear on the TV
Press 1 or 2 to select the ACMS.
screen.
Prepa tion
your DVD+VCR.
screen.
Press ENTER/OK.
12
SET
SYS
fOSD
ON
OFF
A
12
Pr-12
ACMS
SET
Timer
PR SET
ACMS
SET
SYS
-
-
-
-
recording setting (see
Manual
tuning setting (see
3.
14).
p.
ACMS
To set the Colour TV
1 W ON/OFF
-
-
problem
(see
p.
p.
To
-
display
(see
(16:9/4:3)
4.
Press ENTER/OK to start the automatic
the channels of the TV stations in your
with your VCR
the
operational
p.
To select the
(OPR)
O
NIC
-
-
To
improve
(see p. 20).
To activate
sound
(see
the
p.
menu.
3.
the
4.
on
Press 1 and 2 to select the desired
Press i to return to
area.
a
use 3 or
TV
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
the DVD
E
i
The TV STATION TABLE will appear when
tuning
completed.
24).
menu
Press ENTER/OK and
00
S
5.
digital
change
language
(See the Menu Language on page 17.)
can
C02
ACMS
Tip
You
of
Pr-12
playback picture
deactivate the NICAM
or
01
aspect ratio of your
(see p. 25).
To use a pay-TV decoder
(or Satellite) with your VCR
(see p. 24).
-
storing
24).
TV
DECODER
with 1
2.
mode of your VCR
-
area
"OTHERS"
12).
25).
to your
country according
25).
p.
F.OSD ON/OFF
a
OKi
ACMS
A:Austria, B:Belgium, CH:Switzerland, D:Germany,
DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,
NL:Netherlands, P:Portugal, S:Sweden, SF:Finland,
12).
System (see
Power Save Mode
To check
(see
p.
Pr-12
OKi
Select the
or
(Automatic Channel Memory
System) (see p. 13).
setting (see
PSS FOTHERS
22).
ACMS
Date & clock
(Dr.)
p.
DDKEFI
Pr-12
ON
OFF
-
CH
NN L
SYS
fOSD
REC
B
setup
Press i to
save
your
settings.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
OKi
menu.
4 to select.
picture.
13
is
Before
in TV Stations
Tuning
In certain
Operation-VCR part
areas
of the
Manually
country broadcast signals may
be too weak for your DVD+VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
ually
1.
Press 1
or
04
C04
00
STATION
:
AV
PSET
R
Press i.
will appear on the TV
2 to select the PR SET.
MFT
CHANNEL/CABLE
6.
menu
CH
man-
in order for your DVD+VCR to store them.
The main
PR
i
Press 2 to select STATION
that you may
so
name
your TV station.
Press ENTER/OK.
screen.
Press ENTER/OK.
7.
Use 3
or
station
name.
Use 1
or
4 to select letters and numbers for the
2 to
back and forth between
move
characters.
Press ENTER/OK.
12
Pr-12
PSET
R
ACMS
SET
SYS
PSET
R
fOSD
ON
OFF
PR
CH
MFT
STATION
01
C03
00
PR-03
AV
:
PSET
R
2.
Press
MFT
04
C04
00
-
OK i
i
Press i.
Press 3
4 to select the programme number that
you want to tune (for example, PR 04).
PR
CH
MFT
STATION
04
C04
00
PR-04
or
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
04
05
06
07
08
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
MOVE
:
DELETE
:
PSET
R
If you wish to
stages 3 8.
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
04
C04
00
PR-04
05
07
Press ENTER/OK.
08
Press AV to select C
tune other stations
repeat
-
OKi
,
OK i
manually
06
4.
STATION
i, confirm the station placement.
The station table will appear.
3.
CH
P
SET
R
8.
CHANNEL/CABLE
PR
(Standard stations)
or
S
(Cable
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
MOVE
:
DELETE
:
,
OKi
stations):
C02
-
C69,
S01
-
9.
S41.
Enter the channel number of station that you want to
tune,
4 to find the
use 3 or
PR
CH
04
C--
MFT
--
required
----
PSET
R
5.
Searching
will
:
AV
i
stop when it locates
a
stations.
Press 2 to select MFT.
Control the fine
14
tuning
of the station
by using
Your
again.
new
TV station has
DVD+VCR.
station.
STATION
CHANNEL/CABLE
Press i
3 or 4.
now
been tuned into your
Before
Operation-VCR part
the order of TV Stations
Changing
Deleting TV
After
tuning TV stations into your DVD+VCR you may
wish to change the order in which they are stored without having to retune them again. The instructions given
on this page will show you how you can simply move
After
Stations
TV stations into your DVD+VCR you may
wish to delete a station.
tuning
The instructions
you
easily
can
this page will show you how
delete any unwanted TV stations.
given
on
them into your desired order.
1.
1.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
The main
will appear on the TV
Use1or2toselectthePRSET.
screen.
01
CH
MFT
STATION
C03
00
PR-03
SET
PSET
R
SYS
CH
MFT
STATION
01
C03
00
PR-03
SET
SYS
PSET
R
CHANNEL/CABLE
ON
OFF
PSET
R
CHANNEL/CABLE
ON
OFF
:
PSET
R
AV
P
SET
R
2.
ACMS
fOSD
fOSD
PR
12
Pr-12
ACMS
screen.
Pr-12
12
PSET
R
menu
Press ENTER/OK.
Press ENTER/OK.
PR
Prepa tion
Press i.
:
AV
i
i
2.
Press i.
3.
Press 3
Press i.
Press 3
want to
or
4 to select the programme number you
4 to select the programme number you
want to delete.
(for example, PR-03).
move
or
(for example, PR-01)
Press 2.
C01
00
PR-01
02
C02
00
PR-02
C04
00
PR-04
01
C01
00
PR-01
01
C01
00
PR-01
03
02
C02
00
PR-02
02
C02
00
PR-02
04
03
C03
00
PR-03
03
C03
00
PR-03
05
04
C04
00
PR-04
04
C04
00
PR-04
06
05
06
07
08
--
--
-----
05
--
--
-----
06
--
--
-----
07
--
--
PSET
R
08
-----
MOVE
:
DELETE
:
--
-----
--
--
-----
--
--
-----
--
--
Press 3
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
05
--
--
C03
06
After
a
short
00
PR-03
--
--
-----
--
--
-----
--
--
-----
OKi
other TV stations
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
08
--
C03
Press i to
remove
--
--
-----
00
:
DELETE
:
,
OKi
repeat stages
C01
00
PR-02
02
C02
00
PR-04
07
--
C03
new
5.
Press i to
remove
--
-----
00
PR-03
--
--
-----
--
--
-----
--
--
-----
--
--
-----
the
MOVE
:
DELETE
:
menus
,
OKi
from the TV
screen.
repeat stages
PR-03
--
-----
--
--
-----
--
--
-----
the
MOVE
-----
--
PSET
R
5.
--
PSET
R
move
07
-----
01
05
The selected programme will be moved to the
programme number.
06
--
If you wish to delete other TV stations
3-4.
Press ENTER/OK.
05
--
deleted.
08
04
-----
-----
P
SET
R
If you wish to
1-4.
--
while, the selected station will be
06
4.
--
Press 1.
04
08
PR-03
OKi
03
07
-----
00
PSET
R
4 to select the programme number you
want to move to (for example, PR-05).
C01
--
C03
08
or
01
--
07
-----
PSET
R
OKi
,
--
4.
3.
01
MOVE
:
DELETE
:
menus
,
OKi
from the TV
screen.
15
Before
Operation-DVD part
Disc Information
Displaying
on-screen
You
can
loaded
1.
display
various information about the disc
on-screen.
Press DISPLAY to show various
playback
Initial
Settings
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup
menu
item,
see
pages 16 to 19.
information.
The items
type
differ
displayed
playing status.
or
depending
on
the disc
To
display
and exit the Menu:
Press SETUP to
display
the
A second press of
menu.
SETUP will take you back to initial
screen.
To go to the next level:
Press B on the remote control.
1/3
1/12
To go back to the previous level:
Press b on the remote control.
0:20:09
General
1 ENG
ABC
1.
1/1
Operation
Press DVD
on
3D SUR
the remote control.
LANGUAGE
Menu
2.
You
select
can
change
Title
an
item
select the
or
(Track)
--
v / V and
by pressing
setting by pressing
Current title
(or track)
b / B.
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
number/total
number of titles
(or tracks)
Current chapter
number/total number of
Chapter
chapters
Time
Elapsed playing
time
Audio
language
--
--
Selected audio
--
Subtitle
Angle
Sound
--
--
--
2.
or
3.
angle/total
number of
angles
Setup
move
The
If
button is
pressed
display disappears.
no
for
a
few
seconds, the
on-screen
4.
option
then press B
shows the current
item,
as
well
as
setting for the
alternate setting(s).
Use v / V to select the second desired
press B to
5.
appears.
to the second level.
screen
selected
Note:
menu
Use v / V to select the desired
to
Selected sound mode
Select
Press SETUP.
The
channel
Selected subtitle
Selected
Move
move
option
to the third level.
Use v / V to select the desired
setting
then press
ENTER/OK to confirm your selection.
Some items require additional steps.
6.
16
Press SETUP
then
or N
exit the
Setup
menu.
Before
Operation-DVD part
LANGUAGE
Progressive
Progressive
LANGUAGE
Menu
Scan
Scan Video
provides
the
highest quality pic-
tures with less
flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
To turn On
progressive
scan:
Connect
Move
Select
Language
Select
a
Component Input.
Menu
for the VCR and DVD's
language
information display.
and
component out of this unit to the input of your
monitor/television, set your television or monitor to
setup
menu
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
TV
DVD
Disc Audio / Subtitle / Menu
Display
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original:
Refers to the
disc
recorded.
was
Aspect
original language
Mode
Progressive
track
TV
Output
Scan
On
Off
Select
in which the
Prev.
Other:To select another
press number
buttons then ENTER/OK to enter the corresponding
language,
according to the language code list in
the reference chapter (see page 34). If you enter the
wrong language code, press CLEAR.
4-digit
2. Select "On"
3.
Pressing
number
DISPLAY
scan
using
Move
Enter
the v / V buttons.
ENTER/OK will set this unit to
Progressive
mode.
Caution:
Once the
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
On in error, you must reset the unit.
DISPLAY
TV
Aspect
Display
16:9
Mode
Progressive
TV
Output
1)
Scan
Select
Widescreen
Remove any disc from the unit and close the disc
tray. See that "DISC" is displayed on the display
window.
Off
RGB
Press STOP
2)
on
the remote control and hold it for five
seconds before
Move
releasing it. The video output will be
restored to the standard setting and a picture will
once again be visible on a conventional analog TV or
Select
monitor.
TV
Aspect
4:3
:
16:9
DVD
TV
Select when
:
a
Select when
Display
Display
Mode
standard 4:3 TV is connected.
a
Output
Set this unit TV
TV connection
16:9 wide TV is connected.
DVD
setting
works
Output
Select
options according
to the
type.
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
jacks
Mode
Select
only
when the TV
Aspect
mode is set to "4:3".
on
this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
Letterbox:
upper and
Displays a wide picture with
lower portions of the screen.
bands
on
Automatically displays the wide picture
screen and cuts off the portions that do not
the
Panscan:
on
entire
fit.
the
17
Prepa tion
Before
Operation-DVD part
LOCK
AUDIO
Each DVD disc has
variety of audio output options.
options according to the type of
a
Set this unit's AUDIO
audio
system you
(Parental Control)
LOCK
use.
Rating
Unlock
Password
New
Area Code
HU
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Select
Rating
Move
Blocks
Select
playback
Not all discs
Dolby Digital
DVD
/ DTS / MPEG
DivX
1. Select
Bitstream: Select "Bitstream" if you connect the
DVD+VCR's DIGITAL AUDIO OUT jack to an amplifiother
er or
equipment
with
a
Dolby Digital,
DTS
2. To
or
MPEG): Select when connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM audio.
Off
(for Dolby Digital
/
made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
type of signal through without any
Check the documentation for your
amplifier
to
verify
its
format, you
can
hear
playing.
DVD
only
when
a
multi-channel karaoke DVD is
The karaoke channels
mal stereo sound.
18
options,
a
rating
from 1 to 8
one
using
(1)
the v / V buttons.
has the most restrictions
is the least restrictive.
selection,
Password
You
can
enter
or
change password.
1. Select Password
on
2. Follow
shown above
step
2
as
the LOCK
menu
then press B.
(Rating).
change the password, press ENTER/OK when the
"Change" option is highlighted. Input a password and
press ENTER/OK. Enter it again and press
ENTER/OK to verify.
a
Set DRC to On for this effect.
Set to On
then press B.
4. Press ENTER/OK to confirm your rating
then press SETUP to exit the menu.
DVD
program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). This allows you to listen to a
movie at a lower volume without losing clarity of sound.
Vocal
the LOCK
menu
To
(Dynamic Range Control)
With the DVD
the LOCK
Rating 1-8: Rating
and rating eight (8)
capabilities.
DRC
on
Unlock: If you select unlock, parental control is not
active and the disc plays in full.
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
this unit passes each
further processing.
rated.
"Rating"
access
3. Select
DVD
Sample Freq. (Frequency)
their content.
Input a password and press ENTER/OK. Enter it
again and press ENTER/OK to verify. If you make a
mistake before pressing ENTER/OK, press CLEAR.
(for DTS): If you select "Off ", the DTS signal is
output through the DIGITAL AUDIO OUT jack.
not
are
on
you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
MPEG decoder.
PCM
of rated DVDs based
on
the disc mix into
nor-
3. Press SETUP to exit the
If you
forget
your
password
If you
forget your password,
following steps:
1.
Press SETUP to
2.
Input
the
menu.
display
you
the
can
clear it
Setup
using
menu.
number "210499" and press
ENTER/OK. The password is cleared.
6-digit
the
Before
Operation
-
DVD
DivX(R)
DVD
Area Code
Enter the Area Code whose standards
rate the DVD video
reference
1.
part
disc, based
chapter (see
Select "Area Code"
on
the list in the
the LOCK
menu
then press
B.
2.
Follow
3.
Select the first character
4.
2
step
as
shown left
(Rating).
using
provide
registration
using
the
DivX
VOD service. For
more
informa-
tion, visit www.divx.com/vod.
1.
Select
2.
Press ENTER/OK while "Select" is selected and the
"DivX(R)
VOD"
option
then press B.
registration code will appear.
Use the registration code to purchase
v / V buttons.
Press B and select the second character
VOD (Video On Demand)
you the DivX
code that allows you to rent and purchase
We
videos
34).
page
on
used to
were
VOD
using
videos from
v / V buttons.
DivX
or
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
5.
Press ENTER/OK to confirm your
selection.
area
code
download the video onto
a
disc for
playback
on
this
unit.
3.
OTHERS
Press ENTER/OK to exit.
Note:
The PBC and Auto
Play
and
Divx(R) settings
can
be
changed.
All the downloaded videos from
played
back
on
DivX
VOD
can
only
be
this unit.
OTHERS
PBC
On
.
Auto
Off
Play
DivX(R)
VOD
Select
Select
Move
PBC
Set
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
or
Off.
are
played according
are
played
to the
PBC.
Off: Video CDs with PBC
the
same
way
as
Audio CDs.
Auto
You
DVD
Play
set up the DVD+VCR so a DVD disc automatistarts playing whenever the DVD is inserted.
can
cally
If Auto
Play
mode is set to
On, this DVD player will
search for title that has the
then
play
back the title
longest playback
automatically.
time and
Note:
The Auto
Play
function may not work for
some
DVDs.
19
Prepa tion
with
Operation
Playing
You will
5.
tape
a
only
tape
be able to load and
eject
video cassettes
when your DVD+VCR is plugged into the mains.
Your DVD+VCR may also playback recordings from
NTSC
When
To
tapes (on PAL TV).
Getting
better
a
s witch
off the slow motion and
shuttle, press the
desired function.
slow motion and
During
picture
playback started, the
automatic tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control to
manually adjust the tracking until any distortions have
a
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(REV, PB 5-, PB 1-, Still, SLW, PLAY, 2PLY, CUE)
Slow motion
appear
cassette is inserted and
the
on
shuttle, the noise bars may
picture according
to the status of
tape.
If distortions
can
be
seen
in the
picture,
reduce them
withvorV.
6.
Press STOP to end
playback.
Press EJECT.
been removed.
If the end of the
1.
Make
that you have correctly connected your
DVD+VCR as described earlier in this book.
Tu rn
sure
your TV.
Press POWER to turn
on
your DVD+VCR.
Insert the video cassette into your DVD+VCR.
on
CM
The video cassette should have the window side
facing
2.
up and the
Press N to start
If you load
a
arrow
facing
away from you.
your tape.
video cassette which has had its record
of the cassette will
give
the
automatically adjust
best picture quality.
Press PAUSE/STEP to still
by
the
picture.
repeatedly to advance
Press PAUSE/STEP
frame
a
the
tape
4 Press
120 seconds
5 Press
150 seconds
6 Press
180 seconds
OPR
(Optimum
for up to 5 minutes. After 5
minutes your DVD+VCR will stop the tape to
prevent damaging the tape or your DVD+VCR
This feature
Still
appear in
can
paused
.
picture quality
can
be
improved slightly by using
Press N to continue
playing
your tape.
Double
speed playback
Press the "N" button during normal
playback. The tape will play back at double speed
the
tape. Please
Response)
play
note that the OPR icon
that mode when
1.
Press i.
2.
Press b
3.
Press ENTER/OK.
4.
Press
and without sound.
3
or
B to select
or 4
playback
at
speed
playing
5.
a
repeatedly
to select:
tape.
Press i return to
screen.
back press either BACKWARD or
FORWARD to this will enable you to rapidly wind the
During playing
where you
search:
see
Logic
During
fast
are on
tape.
Pr-12
PSET
R
rewinding press and hold
will be played back at 7 times
forwarding
m or M the picture
normal playback speed.
20
the
or
fOSD
ON
OFF
ACMS
a
(
)
will
of
only
tape.
(OPR).
Picture search:
tape
playing
SHARP. Please note you may
Press the "N" button to return to
normal
Picture
automatically improves playback picture
quality by adjusting your DVD+VCR to the condition
vorV.
4.
skip:
3 Press 90 seconds
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
Tapes
press CM SKIP to
2 Press 60 seconds
frame.
be
playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
1 Press 30 seconds
Your DVD+VCR will
to
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
Repeatedly
AUTO TRACKING
tracking
(Commercial Message) Skip:
normal
playing
protection tab removed, playback
start automatically.
3.
tape is reached, your DVD+VCR will
stop playback automatically, rewind, stop, eject the
tape.
OFF
SOFT
SHARP
OFF, SOFT
only
or
set OPR when
Operation
with
Instant Timer
tape
Recording (ITR)
Your DVD+VCR allows you to make
variety of simple methods:
Instant Timer
ately
for
runs
out.
set
a
7.
recordings using
incorporates Long Play (LP)
using
Standard
which
LP you
Play (SP); using
1.
Make
Notes:
If you do not wish to record
on a
tape (this
happrotection
that you have correctly connected your
DVD+VCR as described earlier in this book.
on
video cassette with
a
with self adhesive
your DVD+VCR.
protection
tab into your
The video cassette should have the window side
facing
up and the
Press
3 or 4
arrow
facing
can
by accident!) remove the
edge of the video cassette.
possible to record on a video cassette
record protection tab removed by covering
DVD+VCR.
3.
recording.
Press EJECT.
pen quite easily
tab on the back
sure
Insert
recording.
It is
Press POWER to turn
2.
Press STOP to end
LP.
using
unwanted
Tapes can be paused for up to 5 minutes; RECP will
be displayed when a tape is paused. After 5 minutes
your DVD+VCR will stop recording to prevent
damaging the tape or your DVD+VCR.
8.
will be able to record up to 360 minutes. Please note
there will be a slight loss in picture and sound quality
when
Press PAUSE/STEP to continue
a
enables you to record up to twice the amount of time on
a video cassette. For example an E-180 will record up
to 180 minutes
recording
scenes.
Recording (ITR) start recording immediperiod of time or until the video cassette
Your DVD+VCR
Press PAUSE/STEP to avoid
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to select TV mode and then
a different channel on your TV.
selecting
away from you.
to select the programme number you
wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
4.
If you wish to record directly from the SCART or
RCA jacks, repeatedly press AV until the socket you
wish to record from is
AV 1 for
the
recording
displayed.
from EURO AV1 SCART
jacks
on
of your unit.
AV 2 for recording from EURO AV2 DECODER
rear
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
jacks
(Left
5.
the
on
&
rear
Right) jacks
on
the front of your unit.
Press LP if you wish to record in
Standard Play.
Long Play
or
SP will
produce improved picture and sound quality,
however LP will provide twice as much recording
time
6.
as
SP.
Press REC/ITR
Press REC/ITR
on
on
the remote to start
recording.
the remote several times.
Each successive press will increase the record time
by 30 minutes until you reach a maximum of 9
hours.
21
Operation
with
Operation
tape
On Screen
Timer
recording using
Display
PR
DATE
TIME
::
--
--
PR-034--
You may set up to seven timer record events
within one month of the current date.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
DLYSUMOTUWETHFRSA
OK i
Note:
Before
setting
the timer make
set the DVD+VCR clock
sure
correctly
that you have
and you know
which stations you have tuned TV stations
DVD+VCR.
on
6.
Use v/V/1/2 buttons to enter the
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
your
DATE
a
video cassette with
protection
tab into your
DVD+VCR.
The video cassette should have the window side
facing
2.
up and the
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
away from you.
facing
arrow
TIME
41 4 ::
00 1 5 30
PR-03
Insert
start and
end times of the programme that you wish to record.
PR
1.
recording
i
Press i.
Press1or2toselectREC(
7.
).
Press ENTER/OK.
Press B and press v
off.
PR
PR
DATE
--
TIME
--
--
--
--
--
::
-~
::
--
-~
::
--
-~
::
--
--
-~
--
--
--
--
::
--
--
-~
--
--
--
--
--
--
--
--
::
--
--
-~
::
--
--
-~
--
--
--
--
--
V to switch VPS/PDC
DATE
on or
TIME
41 4 ::
00 1 5 30
PR-03
--
or
~
SP
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
SP
--
VPS/PDC
ON
:
i
DELETE:
3.
Press ENTER/OK to start
OK i
,
setting
the timer record
8.
Press B to select the
Press v
event.
IP,
4.
Use the PR/TRK
(v/V)
to enter the station that you
wish to record then press 2.
PR
DATE
PR-03
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
V to select the desired
IP mode determines how much
when VPS/PDC is ON.
SP
--
SP
--
SP
--
SP
--
PR
SP
--
PR-03
SP
--
DATE
TIME
41 4 ::
00 1 5 30
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
SP
--
Note:
Use the PR/TRK
are
(v/V)
to enter the date of the
programme.
If you press ENTER/OK before
you may select one of the
recording features.
Press 1
or
2 to
entering the date
following automated
select, then press ENTER/OK
to
confirm.
DLY To record every day (except
Sunday) at the same time.
SU~SA
To record at the
22
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
full press v or V to select
the event that you wish to remove and replace.
Press b to delete the event.
5.
tape is left and
speed from SP to LP, if necessary,
plete recording the program. IP mode is not
i
If all timer record events
tape speed (SP,
LP).
switches
TIME
--
or
or
recording speed.
same
Saturday
and
time every week.
to
com-
selected
Operation
with
tape
Timer
recording using
Display (Continued)
9.
On Screen
Press i to set another timer record event and follow
3 to 8.
steps
Check that the timer event details
Press i return to
are
correct.
screen.
If PLEASE CHECK is
you have entered
and will need to re-enter the data.
incorrectly
displayed,
The VPS
The timer
standby
will appear in the display
window while your DVD+VCR waits to make the
)
by
the TV station and this
VPS should be set ON for all timer
TV
stations
set
***
recordings from
signals. It should be
TV stations that
are
system PDC, which is used in the time
being in the Netherlands, can also be used with your
recording.
The similar
new
11. Press POWER to end timer
is broadcast
broadcasting these
OFF for all timer recordings from
not broadcasting these signals.
recording.
symbol (
signal
controls the timer in the video recorder.
Note:
mode for the timer
Programme System (VPS)
The Video Programme System (VPS) ensures that the
TV programmes that you have programmed for timer
recording will be recorded exactly from their beginning
to end, even if the actual broadcasting time differs from
the scheduled time due to delayed start, or if the programme is extended beyond its scheduled time. Also, if
a programme is interrupted, for example, if a news flash
is inserted, the recording will also be interrupted automatically and resumed when the programme continues.
10. Press POWER to switch your DVD+VCR to Timer
Standby mode.
The 1W Mode is not available in the
Video
video recorder.
recording.
Notes:
The DVD+VCR will
Timer
power off when
ends.
Recording
During
automatically
timer
recording standby mode, the DVD
cannot be operated. To use the
VCR mode
and
DVD+VCR, press POWER. After you use the DVD or
VCR, press POWER again to put the VCR into timer
mode.
recording standby
If at
later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
a
the timer event
again. Simply display
or
screen.
Use v
V to select the event that you wish to delete
or
change.
Press b to delete the event...or
Press ENTER/OK to
select; Station, Date,
then press b or B to
Start and End times and
change;
Press v
recording speed.
or
V to enter the correct
information.
If Timer record events
Make
ing
sure
Overlap...
that the
events do not
preset times of the timer recordoverlap. If they do, the earlier pro-
gramme will
always
Example:
Programme
1 is
be
given priority.
programmed
to start at 16:00 and
programmed
to start at 16:30 and
end at 17:00.
Programme
2 is
end at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
will be recorded.)
To
w atch a
DVD while
performing
a
timer
2
recording,
press DVD to select DVD mode.
23
Operation
Additional
Operation
Hi-Fi Stereo Sound
-
VCR part
Tape Counter Memory Stop
System
Your VCR will record and
playback Hi-Fi stereo sound.
In addition it has a stereo NICAM digital stereo sound
decoder. This allows you to record and playback the
sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
The
displayed on the display window instead of the time by pressing CLK/CNT
on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape.
1.
Digital Tape
Counter
be
can
Press CLK/CNT.
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
Press CLEAR to set the counter to 0:00:00.
audio
The
1.
system, video disc
Your VCR's NICAM
to
Press N
another Hi-Fi VCR.
or
digital
2.
briefly displayed
couple
of seconds:
the TV
on
for
screen
recording.
will display
Press x when
playback
or
recording
is
complete.
standard stereo, bilingual and mono sound. The
particular type of sound received or that recorded
will be
start
the actual play time in
tape counter
hours, minutes and seconds.
sound decoder allows you
broadcasts with NICAM sound, as well as
enjoy
or
Press m.
The
a
tape will rewind and automatically stop when
the counter returns to 0:00:00.
STEREO NICAM
Sound is
and
automatically
mono
recorded
tracks of the video
on
the Hi-Fi stereo
To set the decoder
tape.
BIL NICAM
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
on
the Hi-Fi
channel
(left)
track of the video
mono
tape.
MONO
The sound is recorded
mono
2.
track of the video
Press AUDIO
the Hi-Fi tracks and the
on
tape without any separation.
until the desired audio mode
repeatedly
We have
already described, how to connect a decoder
for pay-TV station as CANAL+ or PREMIERE on page
9. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
1.
The main
appears.
3.
Press F
The choice is
STEREO, LEFT, RIGHT and MONO.
In BIL NICAM
playback
the
the left channel and
primary language is outthe secondary channel is
the right channel when
put
output simultaneously from
audio output is set to STEREO.
The primary language will be output from both chanon
nels when the audio
Please note that
setting
when adjusting
the
tracking
On Screen
You may easily
amount of tape
display the current time or tape counter,
left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your DVD+VCR on the TV screen. If a recording is
taking place these On Screen Displays will not be
recorded onto the
tape.
Press CLK/CNT to
Press CLK/CNT
display options.
display.
repeatedly
The
tape
to
cycle through
the
counter and amount of
tape left will appear if there is
2.
a
tape loaded.
After 3 seconds the
Displays
will clear
majority of the On Screen
leaving only the clock or tape
counter and the amount of
Press CLK/CNT
the TV
24
screen.
2.
again
to
tape left
remove
all
on
the
screen.
displays
from
Press D
ON:
or
or
E to select.
When the decoder is connected to the AV2
socket.
OFF: When another VCR is connected to the AV2
socket.
3.
Display (F.OSD)
will appear on the TV screen.
G to select the DECODER.
menu
Press ENTER/OK.
is MONO.
control Hi-Fi stereo sound may revert to MONO.
1.
Press i.
Press i to return to
a
TV
picture.
Additional
Operation
-
VCR part
Wide Screen
Compatibility
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
Your DVD+VCR
record and
screen.
format programme
Video Doctor
1.
(Self-Diagnosis)
Press1or2toselect
back wide
play
aspect ratio programmes (16:9). To record
signal
screen
Press i.
can
successfully
16:9
must be broadcast
by
wide
a
the correct
screen
screen
type of wide
the TV station.
.
1.
Press ENTER/OK.
Switch
on
your DVD+VCR.
Press i.
PressForGtoselect
ANTENNA CONNECT
HEAD STATUS
.
Press ENTER/OK.
TAPE STATUS
NO. OF TIMER PROGRAMME
12
NEXT TIMER PROGRAMME
Pr-12
PSET
R
ACMS
SET
SYS
PLEASE CHECK
fOSD
ON
OFF
i
12
2.
Press
3 or 4
to check
a
problem.
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the
PSET
R
jack securely.
2.
NEXT TIMER PROGRAMME
O PR-01 26 10:00~11:00SP
Shows the current status of timer
Lock
switched off
1.
menus
on
that your unit
the remote control.
place
Press v/V
16:9.
or
format
enjoy
only
be
be
operated
pressed
a
few
seconds.
to switch off the child lock.
display
window.
Normal format
(Power
screen.
must connect
cable.
Mode)
save
place
Wide-Screen
from the TV
playback you
using a SCART
Set 1W ON/OFF to ON to
your DVD+VCR into
an
economic power save mode.
Nothing is displayed in the display window.
Press i.
Press F
will appear on the TV screen.
G to select the 1W ON/OFF.
menu
or
Press ENTER/OK.
work.
If any buttons on the front of your unit are
SAFE will flicker in the display window for
menus
Wide-Screen
your VCR to the TV
screen.
can
the
remove
1W Mode
can
recording
playing back and recording
recordings (16:9).
Press i to
To
recording.
from the TV
and
for
The main
OFF will appear in the
4:3
programmes
Wide-Screen and Normal programmes as normal.
Only
1
again
to
repeatedly
AUTO,
i
16:9:
Press LOCK.
Press LOCK
ON
OFF
Only for playing back
recordings (4:3).
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
2.
fOSD
ON
OFF
S
AUTO
4:3
16:9
A
4:3
3.
the front of the unit
so
PSET
R
fOSD
as
(Child Lock)
The control buttons
using
the
SYS
(Playback mode only)
Automatically plays back Wide-Screen
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
remove
SET
AUTO
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in
Press i to
Pr-12
ACMS
select:
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
3.
12
Pr-12
2.
Press D
3
Press i.
or
E to select the ON.
Notes:
Some function may not be
?
operated
in the 1W Mode.
The 1W Mode is not available in the
standby
mode for
the timer
recording and when turn Power off of the
DVD+VCR after receiving the encoded television signals (CANAL+ or PREMIERE).
?
The encoded television
MIERE)
are
signals (CANAL+
or
PRE-
not decoded in the 1W Mode.
25
Operation
Additional
from External
Recording
You
record from
can
camcorder
external
or
VCR, connected
that the
sure
from is connected
Press AV
2.
external
an
VCR part
Components
component, such
as a
to any of the DVD+VCR's
inputs.
Make
1.
Operation
-
component you
properly
repeatedly
want to record
to the DVD+VCR.
to select the external
input
You
the
&
3.
Load
from EURO AV1 SCART
4.
Set
recordable
on
start
the
tape
or
Press REC/ITR
jacks
4.
Press STOP to
or
LP)
as
necessary
by
on
component. If
your DVD+VCR, you can
the Remote Control
once
lights
in the
window.
display
5.
confirm the
?
If your source is copy-protected using CopyGuard,
you will not be able to record it using this unit. See
o
record for
Timer
26
a
fixed
Recording.
more
length
of
recording
start
recording,
position.
page 2 for
at the
point
from
on
the Remote Control.
manually
to
begin
details.
time,
see
Instant
When the DVD is finished
playing,
press STOP to
copying.
Notes:
?
If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision encoded DVDs (or
Discs). "LOCK" is displayed in the display window.
?Y
?
Before
results, pause playback
Press REC/ITR
end
stop recording.
?
?T
want to
The DVD goes into PLAY mode and the VCR goes
into RECORD mode. If the DVD disc menu appears,
to start
Notes:
on
place on the DVD from which you
dubbing using the N, BACKWARD,
you may need to press N
disc in the external
The REC indicator
Copyright
tape into the VCR deck.
which you want to record.
recording.
7.
blank VHS video
For best
on
tape.
you have a TV attached to
see the video playing.
6.
a
copying.
mode
a
Play
tape.
Find the
the front of your unit.
recording
(SP
pressing LP repeatedly.
5.
VHS
3.
rear
Right) jacks
a
a
Insert
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left
DVD to
FORWARD and PAUSE functions.
recording
the
a
2.
to
of your unit.
AV 2 for recording from EURO AV2 DECODER
on
copy the contents of
Insert the disc you wish to copy into the DVD deck
and close the disc tray.
rear
jacks
can
1.
record from.
AV 1 for
from DVD to VCR
Copying
stop the copy process manually when the
DVD movie ends, or the unit may rep lay and record
ou
must
over
and
over
again.
When you stop the DVD
the recording on VCR is
playback during copying,
stopped automatically.
General
Playback features
Buttons
DVD Part
-
Discs
Operations
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
During playback,
Press X
./>
closes the disc
or
ALL
tray.
press X to pause
repeatedly
to
playback.
ALL
play Frame-by-Frame.
DVD
press . or > to go to the next
to return to the beginning of the current
During playback,
ter/track
or
chap-
ALL
to select the
ALL
VCD
DivX
VCD
DivX
chapter/track.
Press . twice
briefly
to
step back
to the
previous
chapter/track.
m/M
m
During playback, press
required scan speed.
or
M
DVD, DivX disc; 4 steps
Video CD, MP3, WMA, Audio CD
While the
slow
REPEAT
; 3
playback is paused, press
motion (4 steps, forward only).
steps
M
repeatedly
to
press REPEAT repeatedly to select
desired repeat mode.
DVD Video discs: Chapter/Title/Off
During playback,
Video
A-B
repeatedly
play
in
a
ALL
CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point A
and point B and repeats a sequence from point A (Starting
point) to point B (End point). Press CLEAR to exit.
ZOOM
DVD
During playback or pause mode, press ZOOM to enlarge the
video image (4 steps).
You can move through the zoomed picture using bBvV
DVD
VCD
DivX
ACD
DVD
VCD
DIVX
buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback
playback.
(ANGLE)
(SUBTITLE)
(AUDIO)
in
stop mode, press RANDOM for random
screen.
The disc
Otherwise,
menu
ACD
MP3
WMA
If the current DVD title has
the
DISC MENU
or
menu, the title menu appears
the disc menu may appears.
appears
on
a
the
press ANGLE
scenes
repeatedly
During playback, press SUBTITLE repeatedly
desired subtitle language.
During playback, press AUDIO repeatedly
audio language or audio track.
DVD
DVD
screen.
of DVD disc contains
During playback
ent camera angles,
desired angle.
on
recorded differto select
to select
to hear
a
DVD
a
a
different
DVD
DivX
DVD
DivX
VCD
27
Operation
Playing
Notes
?
a
DVD
general
on
Video CD
or
features:
Marker Search
OnaVideoCDwithPBC,youmustsetPBCtoOffon
the setup menu to use the repeat function (See "PBC"
on page 19).
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
?
(Track)
You
?
When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
To Recall
will blink
1.
the TV
on
different
angles
possible.
is
?
The A-B
current
repeat
screen
as an
during
recorded at
angle switching
2.
function is available
only
disc
search
menu
Within 10
4.
VCD
audio
Press DISPLAY
2.
Use 3
during playback.
option
will be
Press AUDIO
clear.
starts from the marked
Or, Press CLEAR and the marker number is
any marker
the marker search menu.
play
can
Last Scene
This
This
effect, select "Normal".
player
Memory
by inputting
remove
DVD
memorizes last
its number
edly
on
ACD
scene
VCD
from the last disc that
remains in memory even if
the disc from the player or switch off the
player
scene
does not memorize the
you switch off the
disc.
The
during playback.
on
the
scene
memorized,
player
before
scene
of
commencing
a
disc if
to
play
until "3D
playback, press AUDIO repeatSUR." disappears from the menu
screen.
Time Search
DVD
To start
at any chosen time
playing
VCD
DivX
on
the disc:
1.
Press DISPLAY
2.
Press v / V to select the time clock icon and
during playback.
"--:--:--" appears.
Use numerical buttons to
input
the
required
start
time in
hours, minutes, and seconds from left to
right. If you enter the wrong numbers, press CLEAR
the numbers you entered. Then
correct numbers.
remove
Press ENTER to confirm.
selected time.
Playback
input
the
starts from the
appears when you leave the DVD
mode for about five minutes.
screen saver
player
menu screen.
To return to normal
28
marker
Screen Saver
"3D SUR." appears
4.
playback
or
a
Note:
option.
highlighted.
Use1or2totoselect"3DSUR".
to
b / B to select
If you load a disc that has the
the scene is automatically recalled.
ACD
3.
seconds, press
player.
To turn off the 3D Surround
2.
You
you
4 to select the sound
The sound
1.
press SEARCH. The marker
appears on the screen.
is viewed. The last
DivX
1.
3.
of the
speakers (instead
speakers normally required for multi-channel
a home theater system).
or
Marked Scene
3D surround effect that simulates multi-
a
channel audio from two stereo
DVD
the TV
erased from the list.
3D Surround
from
on
playback,
Press ENTER and
3.
Additional features
five+
a
number that you want to recall
in the
chapter/track.
produce
Clear
or
During
scene.
To
Marker icon appears
to enter up to nine
markers.
scenes
indication that
playback
points. To enter a
point on the disc. The
screen briefly. Repeat
Zoom may not work
DivX
from up to nine memorized
marker, press MARKER at the desired
start
can
VCD
Marker
a
?
on some
DVDs.
To enter
DVD
in
Stop
the
Playing
This unit
can
Audio CD
an
Audio CDs
play
MP3/WMA file
or
MP3/WMA files record-
or
ed media.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
Audio CD, a menu appears on the TV screen.
Press v / V to select
ENTER and
playback
track/file then press PLAY
starts. You can use variable
a
or
or
0:00:00
1/12
List
Track1
1-Music1
Track3
2-Music2
Track4
3-Music3
Track5
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Track8
DISPLAY
Clear All
When
track
playing
file
a
PROGRAM Edit
titles, you
information such
containing
can see
the information
Genre
On
?
by pressing
move
]
6.
to the next page.
top
is
highlighted.
as
with this
compatibility
player
is
within 8
48 kHz (MP3), within
Sampling frequency:
32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32 384 kbps (WMA)
The player cannot read an MP3/WMA file that has a
file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates
-
ISO 9660 file
To
resume
playing
?
the
in
Playback begins
programmed the tracks.
played
normal
playback
track
a
on
ENTER to start.
list have
back, select
on
on
the
once.
from
programmed play-
the list and then press PLAY.
Tracks
a
desired
repeat mode.
Track:
repeats the current track
All: repeats all the tracks on the "Program" list.
Off(No display):
does not
play repeatedly.
If you press > once during
the repeat playback cancels.
File
names
should have
must
incorporate
They
should not
a
1.
Track
Repeat
playback,
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
a
"Program"
During
STOP
the
mark will appear
E
List
mode, press PROGRAM and
Use vVbBto select the track that you wish to
erase from the Program list.
3.
Press CLEAR.
tracks
1.
/ ?
folder should be less
Track from
2.
an
The total number of files in
than 1190 files.
Erasing
2.
on
the
Erasing
system.
*:"<>letc.
?
to
-
an
?
"List", then press ENTER
Note:
follows:
-
?
or
Press REPEAT to select
menu
-
?
the
PHOTO word
limited
?
on
Repeat Programmed
MP3 / WMA disc
?
track
a
program edit mode,
the order in which you
Playback stops after all of the tracks
?
?
mark
E
Select
again to exit the
will disappear.
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
of the
appears.
mark will appear.
E
Press PLAY
a
on
menu
5.
?
?
Press PROGRAM. The
"Program"
Press DISC MENU to
MUSIC
Select the track you want to start
"Program" list.
as
Tips:
?
or
MP3/WMA files recorded
4.
DISPLAY.
[ Song, Artist, Album, Comment,
or
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
ID3 TAG
?
media. AUDIO CD
3.
Info
Audio CD
an
then the
7-Music7
PROGRAM Edit
Insert
Press PROGRAM
Program
Track2
1.
contain 30 tracks.
can
Note:
1/12
List
Program
A program
2.
MUSIC
0:52:07
The program function enables you to store your favorite
tracks from any disc in the player memory.
play-
back functions. Refer to page 27-28.
AUDIO CD
Programmed Playback
Repeat step
erase
additional
the list.
Complete Program
During
STOP
the
mark will appear
E
1~3to
List
mode, press PROGRAM and
Use vVbBto select "Clear
All", then press
ENTER.
Note:
The programs are also cleared when the power is off
the disc is removed.
or
29
Operation
Viewing
This unit
1.
can
JPEG file
a
JPEG files recorded media.
play
Insert
a
menu
appears
Moving
JPEG files recorded media. The PHOTO
on
the TV
to another File
Press .
ing
screen.
PHOTO
a
or
picture
>
or cursor
(b
or
B)
to advance to the next
once
or
while view-
previous
file.
Zoom
Preview
List
During watching pictures, press ZOOM to enlarge the
video image (4 steps).
You can move through the zoomed picture using bBv
Folder 00
Folder 01
>>>
Folder 02
Folder 03
Folder 04
V buttons.
01 FILE 01
02 FILE 02
To rotate
03 FILE 03
/FILE 01
picture
Press v / V
during showing
ture clockwise
2.
Press v / V to select
a
or
a
picture
to rotate the
pic-
counter clockwise.
folder, and press ENTER. A
list of files in the folder appears.
3.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
JPEG disc
or
PLAY.
as
?
4.
To return to the PHOTO
menu
while
watching pic-
tures, press STOP.
?
If you
are
in
Folder
ous
file list and want to return to the
a
list,
use
v / V buttons to
highlight
after several
Press DISC MENU to
move
large
---
of the files may
reduce the resolution of the JPEG
minutes,
some
pixels
and burn another
disc.
press ENTER.
?
upon the size and number of JPEG
files, it could take a long time for this unit to read
the disc's contents. If you do not see an on-screen
files to less than 5 million
and
is limited
player
Depending
be too
previ-
with this
follows:
display
Tips:
compatibility
?
to the next page.
The total number of files in
a
folder should be less
than 1190 files.
?
There
>>
are
three Slide
(Normal)
and
>
Use vVbBto
select the
?
On
highlight
.
you want to
option
Then,
use
: >>>
use
(Fast),
then press ENTER.
While
top
on
watching
a
of the
picture,
menu
is
press RETURN to hide the
menu.
Ensure that all the selected files have the
extensions when
highlight
the
(Slide Show)
then
press ENTER.
Still Picture
Press PAUSE/STEP
The
?
rename
?
player
will
now
slide show.
go into PAUSE mode.
To return to the slide
PAUSE/STEP
during
again.
show, press PLAY
or
press
copying
into the CD
a
different
".jpg"
layout.
If the files have
File
them
names
to be read
shown
Use vVbBto
30
?
highlighted.
Slide Show
2.
Some discs may be incompatible due to
recording format or the condition of disc.
b / B to
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
help
1.
?
a
PHOTO word
?
Speed options
(Slow).
as
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
by
".jpg"
extension will not be able
this unit. Even
JPEG
image
though
the files
files in Windows
are
Explorer.
Playing
Using
1.
this DVD
Insert
DivX Movie file
a
Player
you
can
play
DivX file.
DivX disc
DivX file recorded media. The MOVIE
a
appears
the TV
on
menu
compatibility
as
follows:
?A
v ailable
with this
player
is limited
screen.
MOVIE
resolution size of the DivX file is under
720x576
0:00:00
(W
x
H) pixel.
List
?
Movie Folder 1
The file
name
of the DivX subtitle is available
Movie Folder 2
by
56 characters.
Movie Folder 3
Movie Folder 4
Movie Folder 5
?
Movie Folder 6
Movie Folder 7
Press v / V to select
a
folder, and press ENTER. A
?
list of files in the folder appears.
3.
variable
can use
?
Press STOP to
stop the playback. The Movie
?
menu
?
Press DISC MENU to
?
On
?
move
DivX
to the next page.
is
highlighted.
picture may not displayed properly while DivX
playback. Set your TV system to AUTO or PAL-60
mode to restore the picture, if available.
?
The disc subtitle may not be displayed properly, if
DivX subtitle is downloaded through the internet.
?
If the Disc Subtitle
setup
menu
a
does not have the
language you are going
be displayed properly.
to
play,
the sub-
called
displaying
If the subtitle does not
the DivX subtitle
display properly during playback,
press and hold SUBTITLE about 3 seconds then press
b / B to select another language code until the subtitle
is displayed properly.
or
DivX file
Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
Playable
Codec format
"DIVX3.xx
Notice for
1-point, 2-point,
encoding,
3-point GMC.
.avi, .mpg, .mpeg
Playable
The
different levels of GMC
are
Playable
encoders, like
Xvid, have this option.
or
usually
MP3/WMA, JPEG and MOVIE file, you
can switch MUSIC, PHOTO and MOVIE menu. Press
TITLE and MUSIC, PHOTO and MOVIE word on top
title may not
audio is out-
GMC?
There
CD with
DivX subtitle
or
GMC, the unit sup-
MPEG4 standard. Some MPEG4
and press ENTER.
menu
30
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
If you are in a file list and want to return to the previous Folder list, use the v / V buttons on the remote to
of the
over
ports only 1-point of the record level.
Tips:
a
interleaved, either video
If the file is recorded with
*
highlight
frame is
screen
putted.
appears
?
_
If the video and audio structure of recorded file
is not
page 27-28.
4.
"
normally.
functions. Refer to
playback
If the number of the
express in the DivX
mark on the
per 1 second, this unit may not operate
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY.
You
impossible code to
file, it may be displayed as
display.
"
Movie Folder 8
2.
If there is
"MP43
", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
", "3IVX ".
Playable
Audio format
"Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
Not all the WMA Audio format is compatible with
?
-
-
?
-
-
?
this unit.
31
Operation
Playing
This unit will
DVD VR format Disc
a
play
DVD-R/RW discs recorded
DVD-Video format that have been finalized
using
using a
the
DVD-recorder.
?
This unit will
Video
1.
play DVD-RW discs
Recording (VR) format.
Insert
a
disc and close the
recorded
tray, It
start
the
using
playing
automatically.
2.
The DVD-VR
appears on the TV screen when
you press DISC MENU buttons while playing.
menu
DVD-VR
3.
Press v / V to select
ENTER and
4.
a
playback
Press DISC MENU to
track then press PLAY
or
starts.
move
to the list
menu.
Note:
?
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
Some DVD-VR disc
DVD RECORDER.
are
made with CPRM data
Player
does not
by
support these
kinds of discs.
What is 'CPRM'?
CPRM is
protection system (with scramble
system) only allowing the recording of 'copy once'
a
copy
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
This
player
is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but
you cannot then make a copy of those recordings.
CPRM recordings can only be made on DVD-RW
you
can
discs formatted in VR
mode, and CPRM recordings
only be played on players
compatible with CPRM.
can
32
that
are
specifically
Additional
Controlling
Operation
other TVs with the
Maintenance and Service
remote control
Refer to the information in this
You
control the sound
source, and
power switch of your LG TV with the supplied remote
control.
can
You
control the sound
can
level, input
level, input
source, and
power switch of non-LG TVs as well.
If your TV is listed in the table below, set the
appropri-
ate manufacturer code.
1.
While
holding
down TV POWER
button, press the
number buttons to select the manufacturer code for
your TV
the table
(see
below).
contacting
When
save
more
them
than
one
at
code number is
one
a
?
listed, try entering
time until you find the
one
that works with
the
the exterior surfaces clean
Keeping
Do not
near
If
Operation
the unit
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Release TV POWER button.
Code numbers of controllable TVs
service technician.
shipping
Please
before
the Unit
Handling
?
2.
a
chapter
use
volatile
liquids
such
as
insecticide spray
the unit.
Do not leave rubber
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
on
your TV.
Cleaning
the unit
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
player, use a soft, dry cloth. If the surfaces
are extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution.
Sony
8,9
Do not
use
Hitachi
4
thinner,
as
(Default),
To clean the
2
Note:
?
?
Depending
on
function
the
on
your TV,
TV,
all buttons may not
after entering the correct
even
When you replace the batteries of the remote, the
code number you have set may be reset to the default
Set the
might damage
as
alcohol, benzine,
or
the surface of the unit.
the Unit
some or
If you enter a new code number, the code number
previously entered will be erased.
setting.
these
Maintaining
manufacturer code.
?
strong solvents such
appropriate
code number
again.
The DVD+VCR is
a
high-tech, precision
device. If the
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
use.
contact your nearest authorized
service center.
33
Language
and Area Code List
Language Code
Use this list to
input
List
your desired
Language
Code
Abkhazian
language
for the
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Disc
Audio, Disc Subtitle, Disc Menu.
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Ta mil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Tu r kish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Tu rkmen
8475
Cambodian
7577
Italian
7384
Por tuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Code List
Choose
a area
Area
code from this list.
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Po r tugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Afghanistan
Argentina
Czech
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
34
Republic
AF
Area
SG
SK
UG
Troubleshooting
Check the
following guide
for the
possible
cause
Symptom
of
a
before
problem
service.
contacting
Cause
Correction
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
No disc is inserted.
Insert
The TV is not set to receive this unit's
Select the
signal output.
on
a
cord into the wall outlet
disc.
not work.
No
picture.
video
appropriate
so the picture
the TV
unit appears
No sound.
securely.
securely.
The Progressive Scan is set to "On" on
the setup menu but is connected to a
standard (analog) television.
Set
The
Select the correct
equipment
connected with the
The audio cables
are
not connected
Progressive
(see page 17).
audio receiver
The DVD
not start
does
player
playback.
so
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
Tu rn
The Audio
Set the Audio
option
tion, then
on
is set to the wrong
The disc is
on
the
An
unplayable
The disc is
equipment
jacks
connected with
the audio cable.
turn
to the correct
the DVD
posiplayer again
POWER.
Clean the disc.
dirty.
The TV channels
mode of the
you can listen to the
sound from the this unit.
by pressing
poor.
input
securely.
option
jacks
Scan to "Off"
securely.
position.
picture
screen.
Connect the video cable into the
signal output.
is
the TV
from the this
The video cable is not connected
audio cable is not set to receive DVD
The
on
input
mode
are
not tuned in
properly.
disc is inserted.
placed upside
Check
Insert
tuning,
carry out
tuning again.
playable disc. (Check
type and Regional code.)
down.
the disc
a
Place the disc with the
playback
side
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
the
The remote control
There is
does not work
remote control and this unit.
properly.
an
obstacle in the
path
of the
The batteries in the remote control
are
the disc
tray correctly
guide.
The disc is
Rating
on
Rating
function
or
change
level.
rating
Remove the obstacle.
Replace
the batteries with
new ones.
exhausted.
Video
tape
cannot be
Is the cassette
compartment empty?
Eject
the
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO"
"AUDIO"
No NICAM sound
recording
NICAM mode is not set
properly.
Make
on
sure
by repeatedly pressing
the remote control.
NICAM in the
menu
is set to
AUTO for the station to be recorded.
35
Refrnce
Specification
General
Power
requirements
AC
Power
consumption
17W
Dimensions
Mass
(approx.)
200-240V, 50/60 Hz
430x78.5x265mm(WxHxD)
4.2
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display type
RF Modulator
UHF 22
68
-
(41˚F
to
95˚F)
(Adjustable)
System
Laser
Semiconductor
Video Head
laser, wavelength
Double azimuth 6
system
650
heads, helical scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75
Vp-p,
(SCART)
(RCA)
ohms, unbalanced (SCART/RCA)
Outputs (DVD)
VIDEO OUT
1
(Progressive Scan)
Vp-p 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
RGB
0.7
COMPONENT VIDEO OUT
output
Vp-p,
x
1
75 ohms
Audio
output (coaxial audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (analog audio)
2.0 Vrms
(1 KHz,
0
dB),
600 Ω, RCA
jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than
Video
1.0Vp-p,
RGB
0.7
output
Design
and
specifications
are
subject
to
Vp-p,
change
75
1 kohms
(SCART)
ohms, unbalanced (SCART)
75 ohms
without notice.
P/NO: 3834RV0046J
36
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement