LG BP730 Owner’s Manual

Add to my manuals
74 Pages

advertisement

LG BP730 Owner’s Manual | Manualzz
OWNER’S MANUAL
Network 3D
Blu-ray Disc™ / DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP730
P/NO : SAC35673406
Getting Started
3
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION : CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4
Getting Started
This device is equipped with a portable battery or
accumulator.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
IMPORTANT SAFETY NOTICE
The cord grip for the plug fitted to this product is
built into the existing power cord as supplied. If,
for any reason you need to shorten the cord.
DO NOT RE-USE THE PLUG.
A new plug must be used to ensure your
continued safety by securing the plug to the
power cord in accordance with Plug & Socket
Regulations 1994.
Notes on Copyrights
yy Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected contents.
To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact
an authorized Customer Service Center.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
Getting Started
5
Important Notice for TV color system
The color system of this player differs according to
currently playing discs.
Only the multi system color TV can receive all
signals output from the player.
yy If you have a PAL color system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
yy The multi system color TV changes the color
system automatically according to input signals.
In case that the color system is not changed
automatically, turn it off and then on to see
normal images on screen.
yy Even if the disc recorded in NTSC color system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
1
Getting Started
For example, when the player plays the disc
recorded in the NTSC color system, the image is
output as an NTSC signal.
6
Table of Contents
Table of Contents
1
Getting Started
3
8
8
9
9
9
10
11
12
12
Safety Information
Introduction
– Playable Discs and symbols used in
this manual
– About the “7” Symbol Display
– Regional Code
– System Select
Remote Control
– Magic remote control functions
Front Panel
Rear Panel
2
Connecting
13
14
14
15
16
17
17
17
19
19
Connecting to Your TV
– What is SIMPLINK?
– Resolution Setting
Connecting to an Amplifier
– Connecting to an Amplifier via HDMI
Output
– Connecting to an Amplifier via Digital
Audio Output
Connecting to your Home Network
– Wired network connection
– Wired Network Setup
– Wireless network connection
– Wireless network setup
3
System Setting
22
23
23
23
25
27
27
29
30
Initial Setup
Settings
– Adjust the Setup Settings
– [NETWORK] Menu
– [DISPLAY] Menu
– [LANGUAGE] Menu
– [AUDIO] Menu
– [LOCK] Menu
– [OTHERS] Menu
16
4
Operating
32
32
32
33
33
33
34
35
36
36
Home Menu Display
– Using [HOME] menu
– Using the Smart Share
Playing the Linked Devices
– Playing a Disc
– Playing Blu-ray 3D disc
– Playing a file on disc/USB device
– Playing a file on a network server
Using Home Network Server for PC
– Installing Nero MediaHome 4
Essentials
– Sharing files and folders
– About Nero MediaHome 4 Essentials
– System requirements
General Playback
– Basic operations for video and audio
content
– Basic operations for photo content
– Resume playback
– Last Scene Memory
On-Screen Display
– To control video playback
– To control photo view
Advanced Playback
– Repeat playback
– Repeating a specific portion
– Playing from selected time
– Selecting a subtitle language
– Hearing a different audio
– Watching from a different angle
– Changing the TV Aspect Ratio
– Changing subtitle Code Page
– Changing the Picture Mode
– Viewing content information
– Changing content list view
– Selecting a subtitle file
– Listening to music during slide show
– Converting 2D content to 3D
Advanced Features
– Wi-Fi Direct™
– Enjoying Miracast™
– Enjoying BD-Live™
– LG Tag On
– LG AV Remote
– Private Sound Mode
36
37
37
38
38
38
39
39
40
40
41
42
42
42
42
43
43
43
43
44
44
44
45
45
46
46
47
47
48
48
49
49
49
Table of Contents
50
7
51
52
52
53
53
54
– Viewing information from Gracenote
Media Database
– Audio CD recording
Using the Premium
Using the LG Smart World
– Signing in
– Searching online content
Using the My Apps Menu
5
Troubleshooting
55
55
56
57
57
57
Troubleshooting
– General
– Network
– Picture
– Customer support
– Open source software notice
3
6
Appendix
4
58
59
59
59
61
61
62
About Magic Remote Control
Network Software Update
– Network update notification
– Software update
Additional Information
– File requirement
– AVCHD (Advanced Video Codec High
Definition)
– About DLNA
– Certain system requirements
– Compatibility notes
Audio Output Specifications
Area Code List
Language Code List
Trademarks and Licenses
Specifications
Maintenance
– Handling the unit
– Notes on discs
Important Information Relating to
Network Services
63
63
63
64
66
67
68
71
72
72
72
73
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
1
2
5
6
8
Getting Started
Introduction
1
Playable Discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
e
Description
yy Discs such as movies that can be purchased or
rented.
yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
yy BD-R/RE discs that are recorded in BDAV format.
Blu-ray
y
u
i
r
DVD-ROM
yy BD-R/RE discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Movie mode and finalized only
yy Supports the dual layer disc also
DVD-R
DVD-RW
DVD+R
DVD+RW
(12 cm)
DVD-RW (VR)
(12 cm)
Audio CD
(12 cm)
CD-R/RW
(12 cm)
Note
–
Caution
–
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
r
VR mode and finalized only
t
Audio CD
y
u
i
yy CD-R/RW discs that contain Movie, Music or
Photo files.
,
>
Indicates special notes and operating features.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible
damages from abuse.
Getting Started
,,Note
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yy If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
About the “7” Symbol Display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labelled same as the rear of the unit or “ALL”.
System Select
Press R (OPEN/CLOSE) when a disc is inserted,
and do not remove the disc. Press and hold T
(PAUSE) for more than five seconds while [OPEN] is
displayed in the display window.
1
Getting Started
yy Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or
DVD±R/RW) discs cannot be played on the
unit.
9
10
Getting Started
Remote Control
a Remote Control Indicator:
(RF & Bluetooth transmitter)
Blinks when operating.
1
Getting Started
b 1 (POWER): Switches the
unit ON or OFF.
c BACK (1): Exits the menu
or returns to the previous
screen.
d HOME (b): Displays the
Home screen.
h
e Direction buttons: Selects
an option in the menu.
If you press the navigation
button while moving the
pointer on the screen, the
pointer disappears, and the
Magic remote control works
as a regular remote control.
To display the pointer again,
shake the Magic remote
control from side to side.
f Wheel (a): Selects menus
or options and confirms your
input ; Scrolls the screen to
search a menu on the web
browser.
g N (Play/Pause): Starts
playback./Pauses playback.
Z (Stop): Stops playback.
c/v: Searches
backward or forward. (Press
and hold C/V)
C/V: Moves previous/
next track or file.
m (INFO/MENU): Displays or
exits On-Screen Display.
l: If necessary, you
can use a virtual numbered
keypad. (Press and hold m
(INFO/MENU))
h Colored (R, G, Y, B) buttons:
Use to navigate BD-ROM
menus. They are also used as
shortcut buttons for specific
menus.
Getting Started
Magic remote control
functions
11
How to use Magic remote control
The Magic remote control operates by pairing with
your unit. Once you purchased the unit, please
register the Magic remote control as follows;
1
Getting Started
To register the Magic remote control
WHEEL
yy Shake the remote control slightly to make the
pointer appear on the screen.
To use the Magic remote control, register it with
your unit first.
1. Turn on the unit and wait for about 10 seconds
and then press and hold Wheel (a) button
while pointing the remote control at the unit.
2. The remote control is automatically registered
and a registration completion message appears
on the screen.
,,Note
If you failed to register the Magic remote
control, turn off the unit and try again.
Battery Installation
yy Shake the Magic remote control slightly to the
right and left to make the pointer appear on the
Center of screen.
yy The magic pointer disappears when the remote
control is not moved for five seconds.
How to use Magic remote tip
yy When you press the wheel, it also functions as
Selection button.
yy You can scroll through menus using the Wheel.
yy Use your wrist to move the pointer more easily.
,,Note
yy If the Magic remote control’s connection is
unstable or has any problems, cancel the
registration and try it again. (page 58)
yy Depending on the content, the pointing of
the magic remote control does not work.
For controlling, please use the direction keys
on the remote.
Open the battery cover at the bottom of the
Remote Control, and insert two (1.5 V AA ) alkaline
batteries with 4 and 5 matched correctly.
>>Caution
Do not mix old and new batteries, as this may
damage the remote control.
12
Getting Started
Front Panel
1
Getting Started
a Disc Slot
e T (PLAY / PAUSE)
b Display Window
f I (STOP)
c Remote Sensor
g 1/! (POWER)
d R (OPEN / CLOSE)
h USB Port
Rear Panel
a AC power cord
c LAN port
b DIGITAL AUDIO OUT (OPTICAL)
d HDMI OUT
Connecting
Connecting to Your TV
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the player to the HDMI jack on a HDMI compatible
TV or monitor.
13
Additional Information for HDMI
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-- The connected device’s video input is set
correctly for this unit.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-- The picture will not be displayed properly
with non-HDCP device.
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
HDMI
cable
TV
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 14)
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (see page
26).
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
,,Note
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
yy When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m).
2
Connecting
Rear of the unit
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
14
Connecting
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
2
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Connecting
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
Resolution Setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution
using [Settings] menu.
1. Press HOME (b).
2. Use a/d to select the [Settings] and press
Wheel (a). The [Settings] menu appears.
3. Use w/s to select [DISPLAY] option then press
d to move to the second level.
4. Use w/s to select the [Resolution] option then
press Wheel (a). to move to the third level.
,,Note
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
4. Use w/s to select the desired resolution then
press Wheel (a) to confirm your selection.
Connecting
,,Note
yy If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p as follows:
1. Press HOME (b) to disappear the HOME
menu.
2. Press I (STOP) for more than 5 seconds.
yy If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
Connecting to an
Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
yy HDMI Audio connection (page 16)
yy Digital Audio connection (page 16)
Since many factors affect the type of audio output,
see “Audio Output Specifications” for details (page
64).
About Digital Multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this, you need a multichannel Audio/Video Receiver that supports one
or more of the audio formats supported by your
player. Check the logos on the front of the Audio/
Video receiver and the manual. (PCM Stereo, PCM
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and/or DTS-HD)
2
Connecting
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
15
16
Connecting
Connecting to an Amplifier via
HDMI Output
Connecting to an Amplifier via
Digital Audio Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using a
HDMI cable.
Connect the player’s OPTICAL AUDIO OUT jack to
the corresponding in jack on your amplifier using
an optional digital audio cable.
Rear of the unit
Rear of the unit
2
Connecting
HDMI cable
Optical
cable
Receiver/Amplifier
HDMI
cable
TV
Receiver/Amplifier
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 27.)
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack. (Refer to amplifier’s
owner’s manual)
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 27)
Connecting
Connecting to your
Home Network
17
Broadband
service
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel or
the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and on-line
content services.
Router
Connecting
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
DLNA certified servers
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
,,Note
yy When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
yy If you want to access content from DLNA
servers, this player must be connected to
the same local area network with them via a
router.
yy To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
(see page 36)
2
Rear of the unit
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
18
Connecting
1. Select [Connection Setting] option in the
[Settings] menu then press Wheel (a).
2. Use w/s/a/d to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
2
Connecting
2. Read the preparations for the network settings
and then press Wheel (a) while [Start] is
highlighted.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server].
3. Select [Next] and press Wheel (a) to apply
network settings.
Network will automatically be connected to the
unit.
Network connection status is displayed on the
screen.
Advanced Setting
If you want to set the network settings manually,
use w/s to select [Advanced Setting] on the
[Network Setting] menu and press Wheel (a).
1. Use w/s to select [Wired] and press Wheel
(a).
4. Press Wheel (a) while [OK] is highlighted to
finish the wired network settings.
Connecting
Wireless network connection
Another connection option is to use an Access Point
or a wireless router. The network configuration and
connection method may vary depending on the
equipment in use and the network environment.
19
Preparation
Before setting the wireless network, you need
to:
-- connect the broadband internet to the
wireless home network.
-- set the access point or wireless router.
-- note the SSID and security code of the
network.
Wireless
Communication
DLNA certified servers
2. Read the preparations for the network settings
and then press Wheel (a) while [Start] is
highlighted.
Access Point or
Wireless Router
Broadband
service
If wired network is not connected to the unit, all
available networks are displayed on the screen.
3. Use w/s to select a desired SSID of wireless
network and press Wheel (a).
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection
from this player to your home network’s router or
cable/DSL modem is always the best option.
If you do chose to use the wireless option, note that
performance can sometimes be affected by other
electronic devices in the home.
Wireless network setup
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Settings]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless router
is required before connecting the player to the
network.
If you have security on your access point, you
need to input the security code as necessary.
,,Note
If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.
2
Connecting
1. Select [Connection Setting] option in the
[Settings] menu then press Wheel (a).
20 Connecting
Advanced Setting
If you want to set the network settings manually,
use w/s to select [Advanced Setting] on the
[Network Setting] menu and press Wheel (a).
1. Use w/s to select [Wireless] and press Wheel
(a).
,,Note
2
Connecting
yy WEP security mode generally have 4 keys
available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1” to connect on your home network.
yy An Access Point is a device that allows you
to connect to your home network wirelessly.
4. Use w/s/a/d to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server].
5. Select [Next] and press Wheel (a) to apply
network settings.
Network connection status is displayed on the
screen.
6. Select [OK] and press Wheel (a) to complete
the network connection.
[AP List] - Scans all available access points or
wireless routers within range and display them
as a list.
[Network name (SSID)] – Your access point
may not be broadcasting its network name
(SSID). Check your access point settings through
your computer and either set your access
point to broadcast SSID, or manually enter the
network name in [Network name(SSID)].
[PBC] – If your access point or wireless
router that supports the PBC (Push Button
Configuration) method, select this option and
press the Push Button on your access point
within 120 counts. You do not need to know the
network name (SSID) and security code of your
access point.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(WiFi Protected Setup), select this option and
note the code number on the screen. And
then, enter the PIN number on a setting menu
of your access point to connect. Refer to the
documentation for your network device.
2. Follow the instructions of each connection
method on the screen.
,,Note
To use PBC and PIN network connection,
security mode of your access point must be
set to OPEN or AES.
Connecting
Notes on Network Connection
yy Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
yy Some internet contents may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
yy You must use a Router to use xDSL service.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
yy The wireless network operate at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be
affected by interference from them.
yy Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
yy For the purpose of the better transmission,
placing the player from the access point as close
as possible.
yy In some instances, placing the access point or
wireless router at least 0.45 m above the floor
may improve the reception.
yy Move closer to the access point if possible or reorient the player so there is nothing between it
and the access point.
yy The reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point,
and the location of the player.
yy Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
21
22 System Setting
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
need to input the security code as necessary.
6. Use w/s/a/d to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
1. Press 1 (POWER).
The initial setup wizard appears on the screen.
2. Use w/s/a/d to select a display language
and press Wheel (a).
3
3. Try the some features of your Magic remote
control by following the guide on the screen.
7. Select [Next] and press Wheel (a) to apply
network settings.
System Setting
Network connection status is displayed on the
screen.
4. Read and prepare the preparations for the
network settings and then press Wheel (a)
while [Start] is highlighted.
If wired network is connected, the network
connection setting will automatically be
finished.
5. All available networks are displayed on the
screen. Use w/s to select [Wired Network]
or desired SSID of wireless network and press
Wheel (a).
If you have security on your access point, you
For details on network settings, refer to
“Connecting to your Home Network” on page
17.
8. Check all the settings that you have set in the
previous steps.
Press Wheel (a) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use w/s/a/d to
select 1 and press Wheel (a).
System Setting 23
Settings
Adjust the Setup Settings
You can change the settings of the player in the
[Settings] menu.
1. Press HOME (b).
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update, BD-Live and on-line content
services.
Connection Setting
If your home network environment is ready to
connect the player, the player needs to be set the
wired or wireless network connection for network
communication. (See “Connecting to your Home
Network” on page 17.)
Connection Status
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
3. Use s/w to select the first setup option, and
press Wheel (a) to the second level.
Internet access is permitted for all BD-Live
contents.
[Partially permitted]
Internet access is permitted only for BDLive contents which have content owner
certificates. Internet access and AACS Online
functions are prohibited for all BD-Live contents
without a certificate.
4. Use s/w to select a second setup option, and
press Wheel (a) to move to the third level.
5. Use s/w to select a desired setting, and press
Wheel (a) to confirm your selection.
[Prohibited]
Internet access is prohibited for all BD-Live
contents.
3
System Setting
2. Use a/d to select the [Settings] and press
Wheel (a). The [Settings] menu appears.
If you want to check the network status on this
player, select the [Connection Status] options and
press Wheel (a) to check whether a connection
to the network and the internet have been
established.
24 System Setting
Smart Service Setting
[Country Setting]
Select your area for displaying proper online
content service.
[Initialize]
Depending on the region, [Initialize] function
may not be available.
Device Name
You can make a network name using virtual
keyboard. This player will be recognised by the
name you are entering on your home network.
3
Wi-Fi Direct
System Setting
This player is a Wi-Fi Direct™ certified device. WiFi Direct is the technology that devices connect to
each other without connecting to an Access point
or a router. Press Wheel (a) to display the WiFi Direct menu. Refer to page 47 for the device
connection.
Network Play
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
,,Note
yy This unit and the DLNA certified
smartphone must be connected to the
same network.
yy To use the [Network Play] function using a
DLNA certified smartphone, press HOME
(b) to display the home menu before
connecting to this unit.
yy While controlling the unit using the
[Network Play] function, the remote control
may not work.
yy Available file formats described on page
61 are not always supported on [Network
Play] function.
System Setting 25
[DISPLAY] Menu
Resolution
TV Aspect Ratio
Sets the output resolution of the HDMI video signal.
Refer to page 14 for details about the resolution
setting.
Select a TV aspect ratio option according to your TV
type.
[Auto]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[4:3 Pan Scan]
[576p]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[720p]
[4:3 Letter Box]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
Outputs 720 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
Ultra HD Upscaling
This feature allows the unit to up-scale the original
video resolution to Ultra HD resolution and output
via HDMI connection.
[Auto]
If you connect a display capable of displaying
Ultra HD resolution, this unit will output video
signals in Ultra HD resolution automatically.
[Off]
The unit will turn off the Up-scaling feature.
,,Note
yy This unit will output video signals in Ultra
HD resolution when it plays BD-ROM disc
formatted in 24 Hz.
yy The playback pictures may be momentarily
interrupted when the resolutions switch.
3
System Setting
[16:9 Original]
Outputs 576 lines of progressive video.
26 System Setting
1080p Display Mode
HDMI Color Setting
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
,,Note
yy When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
3
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
3D Mode
System Setting
Select the type of output mode for Blu-ray 3D disc
playback.
[Off]
Blu-ray 3D disc playback will output as 2D
mode like a normal BD-ROM disc playback.
[On]
Blu-ray 3D disc playback will output as 3D
mode.
Home Menu Guide
This function allows you to display or delete the
guide bubble on the Home Menu. Set this option
to [On] for displaying guide.
System Setting 27
[LANGUAGE] Menu
[AUDIO] Menu
Display Menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
Select a language for the [Settings] menu and onscreen display.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
Press Wheel (a) to select another language.
Enter the corresponding 4-digit number
according to the language code list on page
67.
Digital Output
[PCM Stereo] (HDMI, OPTICAL)
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with twochannel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
[Off] (Disc Subtitle only)
[DTS Re-Encode] (HDMI, OPTICAL)
Turn off Subtitle.
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS
decoder.
,,Note
Depending on the disc, your language setting
may not work.
[BitStream] (HDMI, OPTICAL)
Select if you connect this unit’s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with
LPCM, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and DTS-HD decoder.
,,Note
yy When [Digital Output] option is set to [PCM
Multi-Ch], the audio may output as PCM
Stereo if the PCM Multi-Ch information is
not detected from HDMI device with EDID.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [BitStream]).
3
System Setting
[Other]
,,Note
Since many factors affect the type of audio
output, see “Audio Output Specifications” on
page 64 for details.
28 System Setting
Sampling Freq.
(Digital Audio Output)
[48 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz and 96 kHz
signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
[96 kHz]
3
System Setting
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit automatically
converts any 192 kHz signals to 96 kHz so your
system can decode them.
[192 kHz]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
DTS Neo:6
If the player is connected to the multi-channel
Audio Receiver by HDMI connection, set this option
to enjoy the multi-channel surround sound with
the 2-channel audio source.
[Off]
Outputs the stereo sound via front speakers.
[Music]
Outputs the multi-channel sounds that are
optimized for listening to music.
[Cinema]
Outputs the multi-channel sounds that are
optimized for watching movie.
,,Note
yy This function is not available on an on-line
service.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
yy Only the audio source with less than 48
kHz sampling frequency is available for this
function.
DRC (Dynamic Range Control)
yy This function is available only when [Digital
Output] option is set to [PCM Multi-Ch].
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
,,Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
System Setting 29
[LOCK] Menu
DVD Rating
The [LOCK] settings affect only BD-ROM and DVD
playback.
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press Wheel (a) to create a new password.
Password
You can create or change the password.
[None]
[Change]
Enter the current password and press Wheel
(a). Enter a 4-digit password twice, and press
Wheel (a) to create a new password.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Settings] menu.
3. Use colored buttons to enter “Red -> Green ->
Yellow -> Green -> Yellow -> Blue”.
The password is cleared.
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
,,Note
The [Blu-ray Disc Rating] will be applied
only for the Blu-ray disc that containing the
Advanced Rating Control.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 66.
3
System Setting
Enter a 4-digit password twice, and press
Wheel (a) to create a new password.
[Rating 1-8]
30 System Setting
[OTHERS] Menu
Quick Start
Pointer
This player can stay in standby mode with low
power consumption, so that the player can
instantly boot without delay when you turn on this
unit. Set this option to [On] for activating [Quick
Start] function.
Sets the speed and size of the Magic remote
control’s magic pointer.
[Speed]
Sets the moving speed of the magic pointer.
[Size]
Chooses the size of the magic pointer.
DivX® VOD
3
System Setting
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
,,Note
All the downloaded videos from DivX(R) VOD
with this player’s registration code can only be
played on this unit.
,,Note
yy If [Quick Start] option is set to [On] and an
AC power is accidently re-connected to
the player by power failure etc., the player
automatically boots itself to be the standby
status. Before operating the player, wait for a
while until the player is in standby status.
yy When [Quick Start] is set to [On], power
consumption will be higher than when
[Quick Start] is set to [Off ].
Auto Power Off
The screen saver appears when you leave the
player in Stop mode for about five minutes. If
you set this option to [On], the unit automatically
turns off within 20 minutes since the Screen Saver
is displayed. Set this option to [Off ] to leave the
screen saver until the unit is operated by the user.
System Setting
31
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live contents from the
connected USB storage.
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have
to set all the activation for the on-line services
and network settings again.
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
(see page 59).
System Setting
Software
3
32 Operating
Home Menu Display
Using [HOME] menu
The home menu appears when you press HOME
(b). Use w/s/a/d to select a category and
press Wheel (a).
4
Using the Smart Share
You can play video, photo and audio content on
the unit by inserting a disc, connecting an USB
device or using home network (DLNA).
1. Press HOME (b) to display the home menu.
2. Select [Smart Share] and press Wheel (a).
,,Note
Operating
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
a Displays all linked devices.
b Displays video, photo or audio content.
c Displays the file or folder on linked device.
a [Smart Share] - Displays Smart Share menu.
b
[Premium] - Displays the Premium home
screen. (page 52)
c
[LG Smart World] - Displays LG Apps titles
provided to the unit. (page 52)
d
[My Apps] - Displays the [My Apps] screen.
(page 54)
e [Settings] - Adjusts the system settings.
f
[d] - Searches for desired LG Apps and other
content.
g [c] - Displays login menu.
Operating 33
Playing the Linked
Devices
Playing a Disc
erot
1. Insert a disc in the disc slot.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
2. Press HOME (b) and then select [Smart Share].
Playing Blu-ray 3D disc
e
This player can play the Blu-ray 3D discs which
contains separate views for the left and right eyes.
Preparation
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
yy Check your TV is 3D capable and has HDMI
input(s).
3. Select disc icon.
yy Wear 3D glasses to enjoy the 3D experience
if it is necessary.
,,Note
yy Check whether the BD-ROM title is the Bluray 3D disc or not.
yy Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
yy Connect an HDMI cable (Type A, High
Speed HDMI™ Cable) between the player’s
HDMI output and TV’s HDMI input.
1. Press HOME (b), and set the [3D Mode] option
on the [Settings] menu to [On] (page 26).
yy Unfinalized DVD-VR format discs may not
be played in this player.
2. Insert a disc in the disc slot.
The playback starts automatically.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
3. Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
4
Operating
yy Depending on the BD-ROM titles, a USB
device connection may be needed for the
proper playback.
34 Operating
Playing a file on disc/USB
device
yui
This player can play video, audio and photo files
contained in the disc or USB device.
1. Insert a data disc in the disc slot or connect an
USB device.
Notes on USB device
yy This player supports USB flash drive/external
HDD formatted in FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-Live, use the USB flash drive / external
HDD formatted in FAT32.
yy This unit can support up to 4 partitions of the
USB device.
yy Do not extract the USB device during operation
(play, etc.).
yy An USB device which requires additional
program installation when you have connected
it to a computer, is not supported.
yy USB device: USB device that supports USB1.1
and USB2.0.
4
Operating
When you connect the USB device on the HOME
menu, the player plays an audio file contained in
the USB storage device automatically. If the USB
storage device is containing various types of files, a
menu for the file type selection will appear.
File loading may takes few minutes depending on
the number of content stored in the USB storage
device. Press Wheel (a) while [Cancel] is selected
to stop loading.
2. Press HOME (b).
3. Select [Smart Share] and press Wheel (a).
4. Select the desired linked device in the category.
5. Select [Movie], [Photo] or [Music].
6. Select a file using w/s/a/d, and press N
(Play/Pause) or Wheel (a) to play the file.
yy Video, audio and photo files can be played. For
details of operations on each file, refer to relevant
pages.
yy Regular back up is recommended to prevent
data loss.
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
yy Some USB device may not work with this unit.
yy Digital camera and mobile phone are not
supported.
yy USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
Operating 35
Playing a file on a network
server
yui
This player can play video, audio and photo files
located in a DLNA server through your home
network.
1. Check the network connection and settings
(page 17).
2. Press HOME (b).
3. Select [Smart Share] and press Wheel (a).
,,Note
yy The file requirements are described on page
61.
yy The thumbnail of the unplayable files can
be displayed, but those cannot be played
on this player.
yy The subtitle file name and video file name
have to be the same and located at the
same folder.
yy The playback and operating quality may be
affected by your home network condition.
yy You may experience connection problems
depending on your server’s environment.
yy To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
(page 36)
4. Select a DLNA media server in the category.
5. Select [Movie], [Photo] or [Music].
Operating
6. Select a file using w/s/a/d, and press N
(Play/Pause) or Wheel (a) to play the file.
4
36 Operating
Using Home Network
Server for PC
MAC OS X
DLNA stands for Digital Living Network Alliance,
which allows users to access video, photo and
audio files stored in server and enjoy them on TV
via home networking.
2. Browse the CD-ROM drive and open the
“MediaHome_4_Essentials_MAC” folder.
Before connecting to PC to play a file , Nero
MediaHome 4 Essentials program should be
installed on your PC.
4. In the Nero MediaHome window, drag the Nero
MediaHome icon either to the Applications
folder within the window or to any other
desired location.
Installing Nero MediaHome 4
Essentials
Windows
4
Operating
Start up your computer, and insert the supplied CDROM disc into your computer’s CD-ROM drive. An
installation wizard will walk you through the quick
and uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as follows:
1. Close all Microsoft Windows programs and exit
any anti-virus software that may be running.
2. Insert the supplied CD-ROM disc into your
computer’s CD-ROM drive.
3. Click [Nero MediaHome 4 Essentials].
4. Click [Run] to start installation.
5. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
6. Click the [Next] button to display the serial
number input screen. Click [Next] to go to the
next step.
7. If you accept all conditions, click [I accept
the License Conditions] check box and click
[Next]. Installation is not possible without this
agreement.
8. Click [Typical] and click [Next]. The installation
process is started.
9. If you want to take part in the anonymous
collection of data, select the check box and click
the [Next] button.
10. Click the [Exit] button to complete the
installation.
1. Start up your computer, and insert the supplied
CD-ROM disc into your computer’s CD-ROM
drive.
3. Double-click the “Nero MediaHome.dmg” image
file. The Nero MediaHome window is opened.
5. You can now start the application by doubleclicking the Nero MediaHome icon in the
location you dragged it to.
Sharing files and folders
On your computer, you must share the folder
contained video, audio and/or photo content to
play them on this player.
This parts explains the procedure for selecting the
shared folders on your computer.
1. Double-click the “Nero MediaHome 4 Essentials”
icon.
2. Click [Network] icon on the left and define your
network name in the [Network name] field. The
Network name you enter will be recognized by
your player.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares] screen.
5. Click [Add] icon to open the [Browse Folder]
window.
6. Select the folder containing the files you want
to share. The selected folder is added to the list
of shared folders.
7. Click [Start Server] icon to start the server.
,,Note
yy If the shared folders or files are not displayed
on the player, click the folder on the [Local
Folders] tab and click [Rescan Folder] at the
[More] button.
yy Visit www.nero.com for more information
and software tools.
Operating 37
About Nero MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing video, audio and photo files stored on your
computer to this unit as a DLNA-compatible digital
media server.
,,Note
System requirements
Windows PC
yy Windows® XP (Service Pack 2 or higher), Windows
Vista® (no Service Pack required), Windows® 7
(no Service Pack required), Windows® XP Media
Center Edition 2005 (Service Pack 2 or higher),
Windows Server® 2003
yy The Nero MediaHome 4 Essentials CDROM is designed for PCs and should not
be inserted in this player or in any product
other than a PC.
yy Windows Vista® 64-bit edition (application runs
in 32-bit mode)
yy The supplied Nero MediaHome 4 Essentials
CD-ROM is a customized software edition
only for sharing files and folders to this
player.
yy Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome standalone
yy The supplied Nero MediaHome 4 Essentials
software does not support following
functions: Transcoding, Remote UI, TV
control, Internet services and Apple iTunes.
yy 1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
yy Memory: 256 MB RAM
yy Graphics card with at least 32 MB video memory,
minimum resolution of 800 x 600 pixels, and 16bit color settings
-- Windows : http://www.nero.com/
download.php?id=nmhlgewin
yy Windows® Internet Explorer® 6.0 or higher
-- Mac OS : http://www.nero.com/
download.php?id=nmhlgemac
yy Network environment: 100 Mb Ethernet, WLAN
yy This manual explains operations with
the English version of Nero MediaHome
4 Essentials as examples. Follow the
explanation referring to the actual
operations of your language version.
yy DirectX® 9.0c revision 30 (August 2006) or higher
Macintosh
yy Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
yy Macintosh computer with an Intel x86 processor
yy Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome standalone
yy Memory: 256 MB RAM
4
Operating
yy The supplied Nero MediaHome 4 Essentials
software can be downloaded at
yy Windows® 7 64-bit edition (application runs in
32-bit mode)
38 Operating
General Playback
Basic operations for photo
content
Basic operations for video and
audio content
To play a slide show
To stop playback
To stop a slide show
Press Z (STOP) during playback.
To pause playback
Press N (Play/Pause) during playback.
Press N (Play/Pause) to resume playback.
To scan forward or backward
Press and hold C or V to play fast forward or
fast reverse during playback.
4
You can change the various playback speeds by
pressing c or v repeatedly.
Operating
To slow down the playing speed
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have
many types of content in a folder together. In this
case, press C or V to go to the previous or
next content with same type.
Press N (Play/Pause) to start slide show.
Press Z (STOP) while slide show.
To pause a slide show
Press N (Play/Pause) while slide show.
Press N (Play/Pause) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press a or d
to go to the previous or next photo.
Operating 39
Resume playback
eroyt
u
The unit records the point where you pressed the
Z (STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen
briefly, press N (Play/Pause) to resume playback
(from the scene point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
,,Note
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on
the disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
4
Operating
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
R (OPEN/CLOSE), etc).
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
Last Scene Memory
er
40 Operating
On-Screen Display
Displaying content information onscreen
You can display and adjust various information and
settings about the content.
eroy
To control video playback
eroy
2. Select an [Option] using a/d, and press
Wheel (a).
1. During playback, press INFO/MENU (m).
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
a Progress bar - Displays the current position
and total playing time.
Operating
b [Disc Menu] - Accesses menu on a disc.
c [Title/Popup] - Displays the DVD title menu
or BD-ROM’s pop-up menu, if available.
d [Option] - Displays playback information.
a Title – Current title number/total number of
titles
e [Music ID] - When connected to the network,
can provide information about the current
song during video playback.
b Chapter – Current chapter number/total
number of chapters
f [Repeat] - Repeats a desired section or
sequence. (page 42)
g [3D] - Adjusts the 3D setting. (page 46)
c Time – Elapsed playing time/total playback
time
d Audio – Selected audio language or channel
e Subtitle – Selected subtitle.
f Angle – Selected angle/total number of
angles
g TV Aspect Ratio – Selected TV aspect ratio
h Picture Mode – Selected picture mode
i Movie Information – Select this option and
press Wheel (a) to display movie information
from Gracenote Media Database (BD-ROM/
DVD only).
Operating
,,Note
yy If no button is pressed for a few seconds,
the on-screen display disappears.
yy A title number cannot be selected on some
discs.
yy Available items may differ depending on
discs or titles.
41
Setting the slide show option
You can use various options during viewing a
photo in full screen.
1. While viewing pictures, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (a).
yy If an interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
yy To use the [Movie Information] option, the
player must be connected to the broadband
internet for accessing the Gracenote Media
Database.
yy LG is a licensee of Gracenote technology
and is not responsible or liable for
information from the Gracenote Media
Database.
Controls playback and sets options while viewing
pictures in full screen.
You can control playback and set options while
viewing pictures in full screen.
While viewing pictures, press INFO/MENU (m).
a [Slideshow] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show.
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
b [Effect] - Use a/d to select a transition
effect between photos in a slide show.
c [Music Select] – Select the background music
for the slide show (page 46).
4
Operating
To control photo view
a [Speed] - Use a/d to select a delaying
speed between photos in a slide show.
42 Operating
Advanced Playback
Repeating a specific portion
eroty
Repeat playback
erotu
y
This player can repeat a portion you have selected.
Blu-ray Disc / DVD / Video files
1. During playback, press INFO/MENU (m).
2. Select an [Repeat] using a/d, and press
Wheel (a)
A-B – Selected portion will be repeated continually.
Chapter – The current chapter will be played back
repeatedly.
Title – The current title will be played back
repeatedly.
4
All – All the titles or files will be played back
repeatedly.
Operating
Off – Returns to normal playback.
Audio CDs/Audio files
During playback, select [Repeat] and press Wheel
(a) repeatedly to select a desired repeat mode.
e – Selected portion will be repeated continually.
(Audio CD only)
fTrack– The current track or file will be played
back repeatedly.
gAll – All the tracks or files will be played back
repeatedly.
ghAll – All the tracks or files will be played
back repeatedly in random order.
h– The tracks or files will be played back in
random order.
,,Note
This function may not work on some disc or
title.
1. During playback, press INFO/MENU (m).
2. Select an [Repeat] using a/d, and press
Wheel (a).
3. Select [A-B] and press Wheel (a).
4. Press Wheel (a) at the beginning of the
portion you wish to repeat.
5. Press Wheel (a) at the end of the portion. Your
selected portion will be repeated continually.
,,Note
yy You cannot select a portion less than 3
seconds.
yy This function may not work on some disc or
title.
Playing from selected time
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (a).
3. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press a/d to skip the playback 60 seconds
forward or backward.
4. Press Wheel (a) to start playback from selected
time.
,,Note
yy This function may not work on some disc or
titles.
yy This function may not work depending on
the file type and ability of the DLNA server.
Operating 43
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (a).
Watching from a different
angle
er
3. Use w/s to select the [Subtitle] option.
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
4. Press a/d to select desired subtitle language.
1. During playback, press INFO/MENU (m).
By pressing Wheel (a), you can set various
subtitle options.
2. Select an [Option] using a/d, and press
Wheel (a).
5. Press BACK (1) to exit the On-Screen display.
,,Note
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, choose the appropriate subtitle from the
selections on the disc menu.
4. Use a/d to select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
1. During playback, press INFO/MENU (m).
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (a).
2. Select an [Option] using a/d, and press
Wheel (a).
3. Use w/s to select the [TV Aspect Ratio]
option.
3. Use w/s to select the [Audio] option.
4. Use a/d to select desired option.
4. Use a/d to select desired audio language,
audio track or audio channel.
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this
case, choose the appropriate audio from the
selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
5. Press BACK (1) to exit the On-Screen display.
,,Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
4
Operating
Hearing a different audio
eroy
3. Use w/s to select the [Angle] option.
44 Operating
Changing subtitle Code Page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (a).
Setting the [User setting] option
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (a).
3. Use w/s to select the [Picture Mode] option.
4. Use a/d to select the [User setting] option,
and press Wheel (a).
3. Use w/s to select the [Code Page] option.
4. Use a/d to select desired code option.
4
Operating
5. Press BACK (1) to exit the On-Screen display.
Changing the Picture Mode
eroy
You can change the [Picture mode] option during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (a).
3. Use w/s to select the [Picture Mode] option.
4. Use a/d to select desired option.
5. Press BACK (1) to exit the On-Screen display.
5. Use w/s/a/d to adjust the [Picture Mode]
options.
Select [Default] option then press Wheel (a) to
reset the all video adjustments.
6. Use w/s/a/d to select the [Close] option,
and press Wheel (a) to finish setting.
Viewing content information
y
The player can display the content information.
1. Select a file using w/s/a/d.
2. Press INFO/MENU (m) to display the option
menu.
The file information appears on the screen.
,,Note
The information displayed on the screen
may not correct comparing actual content
information.
Operating 45
Changing content list view
yui
Selecting a subtitle file
y
On the [Smart Share] menu, you can change the
content list view.
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
Press red (R) colored button repeatedly.
1. Use w/s/a/d to select the subtitle file you
wish to play in the [Movie] menu.
2. Press Wheel (a).
Press Wheel (a) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
yy This function is not available for playing file
on a server via home network.
Operating
,,Note
yy If you press Z (STOP) during playback, the
subtitle selection is cancelled.
4
46 Operating
Listening to music during slide
show
i
You can display photo files while listening to audio
files.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using a/d, and press
Wheel (a).
3. Use w/s to select [Music Select] option, and
press Wheel (a) to display the [Music Select]
menu.
4. Use w/s to select a device, and press Wheel
(a).
Available device may differ depending on the
location of the current photo file.
4
Operating
Photo location
Available Device
Disc, USB
Disc, USB
DLNA server
DLNA server
5. Use w/s to select a file or a folder you wish to
play.
Select g and press Wheel (a) to display the
upper directory.
,,Note
When selecting audio file from a server, folder
selection is not available. Only file selection is
available.
6. Use d to select [OK], and press Wheel (a) to
complete music selection.
Converting 2D content to 3D
eroy
This function allows you to convert 2D content to
3D. You can adjust 3D’s depth and distance on the
[3D] option while playing back.
1. During playback, press INFO/MENU (m).
2. Select an [3D], and press Wheel (a).
3. Use w/s/a/d to select desired options.
Select [Default] option then press Wheel (a) to
reset the all adjustments.
4. Use w/s/a/d to select the [Close] option,
and press Wheel (a) to finish setting.
,,Note
yy When you have set to Ultra HD resolution,
if you select the [On] in [3D], the Ultra HD
resolution is automatically changed to the
original resolution.
yy Movie files which is upper 30 fps (frame
rate) may not be converted to 3D.
Operating 47
Advanced Features
Wi-Fi Direct™
To select a server from the device list, files or
folders must be shared by DLNA server from the
connected Wi-Fi Direct™ device.
6. Select [Movie], [Photo] or [Music] using w/s/
a/d, and press Wheel (a).
Connecting to a Wi-Fi Direct™
certified device
yui
This player can play movie, music and photo files
located in a Wi-Fi Direct™ certified device. The Wi-Fi
Direct™ technology make the player to be directely
connected to a Wi-Fi Direct™ certified device
without connecting to a network device such as an
access point.
On Wi-Fi Direct™ certified device
1. Turn on the Wi-Fi Direct™ certified device and
run its Wi-Fi Direct function.
2. Run DLNA application on the device.
3. Select [NETWORK] option in the [Settings]
menu then press Wheel (a).
4. Select [Wi-Fi Direct] option, and press Wheel
(a).
,,Note
yy For the purpose of the better transmission,
placing the player from the Wi-Fi Direct™
certified server as close as possible.
yy This unit can connect only 1 device at a
time. Multiple connection is not available.
yy If you try to connect wireless network while
a device is connected by Wi-Fi Direct™
function , Wi-Fi Direct™ connection will be
force disconnected.
yy If this player and a Wi-Fi Direct™ device
are connected to the different local area
network, Wi-Fi Direct™ connection may not
available.
yy If a Wi-Fi Direct™ certified device is not in
Wi-Fi direct standby mode, this product can
not find the device.
5. Select a Wi-Fi Direct™ device on the list using
w/s, and press Wheel (a).
yy When you connect a Wi-Fi Direct™
certified device to your player, PIN network
connection is not supported.
yy This product cannot connect to a Wi-Fi
direct™ device which is in Group Owner
mode.
Wi-Fi Direct™ connection will be proceeded.
follow the procedure on the screen.
If you want to rescan available Wi-Fi Direct™
device, Select the [Refresh List] and press Wheel
(a).
4
Operating
On your player
7. Select a file using w/s/a/d, and press
Wheel (a) to play the file.
48 Operating
Enjoying Miracast™
You can mirror Miracast certified device’s screen
and sound onto TV screen through your player
wirelessly.
On Miracast™ certified device
1. Turn on the Miracast certified device and run its
[Miracast] function.
On your player
2. Press HOME (b).
3. Select [Miracast] and press Wheel (a).
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers
by connecting this unit to the internet.
1. Check the network connection and settings
(page 17).
2. Insert an USB storage device to the USB port on
the front panel.
An USB storage device is needed to download
bonus content.
3. Press HOME (b), and set the [BD-LIVE
connection] option on the [Settings] menu
(page 23).
4
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
Operating
4. Select a Miracast device on the list using w/s,
and press Wheel (a).
Miracast function will be proceeded
automatically.
If you want to rescan available Miracast device,
select [Refresh List] and press Wheel (a).
,,Note
yy For the purpose of the better mirroring,
place Miracast certified device from the
player as close as possible.
yy This unit can connect only 1 device at a
time. Multiple connection is not available.
yy While mirroring, Wireless network or Wi-Fi
Direct cannot be used simultaneously.
yy If a Miracast certified device is not in
[Miracast] standby mode, this player cannot
find the device.
yy Depending on your wireless network
condition, mirroring may be unstable.
yy While mirroring, the screen may be cut off
depending on your TV’s setting. In this case,
please adjust the display settings on your
TV.
4. Insert a BD-ROM with BD-Live.
The operations may differ depending on the
disc. Refer to the manual supplied with the disc.
Operating 49
>>Caution
Do not extract the connected USB device
while content is being downloaded or a Bluray disc is still in the disc slot. Doing so may
damage the connected USB device and BDLive features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
,,Note
yy Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
yy It may take up to several minutes to load
and start enjoying BD-Live content.
yy For BD-Live, use the USB flash drive /
external HDD formatted in FAT32 only.
,,Note
yy You must activate the NFC feature of your
NFC-enabled phone for Android 4.0 or later.
yy If your NFC-enabled phone’s screen is
locked, it will not read the LG Tag On sticker.
yy If your smart phone case is plated with
chrome, NFC is unavailable. Depending on
your case’s material or thickness, NFC may
not be read well.
LG AV Remote
You can control this player with your iPhone
or Android phone via your home network. This
player and your phone must be connected to your
wireless network device such as access point. Visit
“Apple iTunes” or “Google Android Market (Google
Play Store)” for detailed information of “LG AV
Remote”.
LG Tag On
LG Tag On allows you to install and open “LG AV
Remote” app to NFC-enabled phone.
1. Stick the supplied LG Tag On sticker on this
player.
,,Note
We suggest you first think carefully about
the sticker position, because it is difficult to
remove after sticking it once.
2. Tag the back of your NFC-enabled phone over
the LG Tag On sticker.
-- If “LG AV Remote” app is not installed on your
NFC-enabled phone, the linked screen with
“LG AV Remote” app is displayed.
-- If “LG AV Remote” app is installed on your
NFC-enabled phone, “LG AV Remote” app is
activiated.
By downloading “LG AV Remote” application on
your smart phone or tablet, you can connect your
headsets, and enjoy the sound from your player on
your smart devices.
This feature transmits video signal to TV through
HDMI and Audio signal to smart phone or tablet
through Wi-Fi. For more detailed information,
please refer to the Help menu on “LG AV Remote”
application.
4
Operating
Private Sound Mode
50 Operating
Viewing information from
Gracenote Media Database
The player can access the Gracenote Media
Database and load the music information so that
Track name, Artist Name, Genre and other text
information can be displayed on the list.
Audio CD
When you insert an Audio CD, the player starts
playback automatically and loads the music title
from the Gracenote Media Database.
If there is no music information from the database,
music titles will not appear on the screen.
Music file
Select a music file using w/s/a/d and press
INFO/MENU (m).
4
The player accesses to Gracenote Media Database
for the music information.
Operating
Blu-ray Disc/DVD/Movie file
1. While listening to a music from the movie being
played, press INFO/MENU (m).
2. Select a [Music ID] using a/d, and press
Wheel (a).
The player starts loading the music information
from the Gracenote Media Database.
,,Note
yy The player must be connected to the
broadband internet for accessing the
Gracenote Media Database.
yy If the music information is not in the
Gracenote Media Database, message
appears on the screen.
yy Depending on the cases, it will takes a few
minutes to load music information from the
Gracenote Media Database.
yy Information may be displayed in broken
letters, if the language you selected is not
available on the Gracenote Media Database.
yy This function is not available for on-line
content and content in DLNA servers.
yy LG is a licensee of Gracenote technology
and is not responsible or liable for
information from the Gracenote Media
Database.
yy Audio CDs that users made for their only
private purposes cannot be supported in
this feature because they are not in the
Gracenote Media Database.
yy Supported music file extensions :
mp3, wma, m4a, wav
Operating
>>Caution
Audio CD recording
You can record one desired track or all of the tracks
in Audio CD to an USB storage device.
1. Insert an USB storage device to the USB port on
the front panel.
2. Insert an Audio CD into the player.
The playback starts automatically.
3. Press red (R) colored button to start [CD
Recording].
Stop mode
51
During
playback
Recording
track
All of the tracks
playing track
Recording
time
4X speed
1X speed
,,Note
yy Audio track is recorded to an audio file with
192 kbps.
yy Recording times in the table above are
approximate.
yy Actual recording time for USB storage
device varies depending on the USB storage
device’s ability.
yy Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
yy The length of the audio should be longer
than 20 seconds for the proper recording.
yy Do not turn off this player or extract the
connected USB storage device during Audio
CD recording.
Be Responsible
Respect Copyrights
4
Operating
yy For audio CD recording, use the USB flash
drive / external HDD formatted in FAT32
only.
The recording or copying features on this
player are provided for your personal and
non-commercial use. The making of
unauthorized copies of copy-protected
material, including computer programs, files,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes. LG expressly disclaims
any responsibility for illegal distribution or
use of unauthorized content in commercial
purpose.
52 Operating
Using the Premium
You can use various content services via Internet
with the Premium feature.
Using the LG Smart
World
2. Press HOME (b).
You can use the LG application services on
this player via Internet. You can easily find and
download various applications from LG Smart
World.
3. Select the [Premium] using a/d, and press
Wheel (a).
1. Check the network connection and settings
(page 17).
1. Check the network connection and settings
(page 17).
2. Press HOME (b).
3. Select the [LG Smart World], and press Wheel
(a).
4. Select an online service using w/s/a/d,
and press Wheel (a).
4
,,Note
Operating
yy For detailed information of each service,
contact to the content provider or visit
support link of the service.
yy The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most upto-date information.
yy Using Premium features with wireless
network connection may result in improper
streaming speed by interference from
household devices that are using radio
frequencies.
yy If you want to change the country setting,
go to [Settings] > [NETWORK] > [Smart
Service Setting] > [Country Setting]. Select
[Manual] and press Wheel (a) on [Country
Setting] menu.
4. Select a category using a/d, and press Wheel
(a).
5. Use w/s/a/d to select an application, and
press Wheel (a) to display the information.
6. Press Wheel (a) while [Install] icon is
highlighted. The application will be installed to
the player.
To install an application to the player, user
needs to sign in. Refer to page 53 for more
information of signning in.
7. Press red (R) colored button to display the [My
Apps] screen.
8. Select the installed application and press Wheel
(a) to excute it.
,,Note
yy Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
yy To install a paid application, you need to be
a paid member. Visit www.lgappstv.com for
more information.
Operating 53
Signing in
Searching online content
To use the [LG Smart World] feature, you need to
sign in with your account.
If you are having difficulties finding specific content
from online services, you can use the all-in-one
search function by entering keywords in the [d]
menu.
1. On the home menu, select [c] icon and press
Wheel (a).
2. Fill the [ID] and [Password] field using the virtual
keyboard.
If you do not have an account, press red (R)
colored button to register.
3. Use w/s/a/d to select [OK], and press
Wheel (a) to sign in with your account.
1. Press HOME (b).
2. Select the [d] icon on the home menu using
w/s/a/d, and press Wheel (a).
The [d] menu appears on the screen.
3. Press Wheel (a). The virtual keyboard appears
automatically.
If you select the [Auto Sign In] check box,
your ID and password are remembered and
automatically signed in without entering them.
4. Use w/s/a/d to select letters then press
Wheel (a) to confirm your selection on the
virtual keyboard.
,,Note
5. When you finish entering the keyword, select
[k] and press Wheel (a) to display search
result.
To view the information of your account and
applications, select [c] icon and press Wheel
(a) on the home menu, and select [My Page]
option.
6. Use w/s/a/d to select a desired content,
and press Wheel (a) to move to the selected
content directly.
yy The search function does not search
content in every online services. It works
only in certain online services.
Operating
,,Note
yy Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
4
54 Operating
Using the My Apps
Menu
You can move or delete an installed application in
the [My Apps] menu.
1. Press HOME (b).
2. Select the [My Apps], and press Wheel (a).
3. On the [My Apps] menu, press red (R) colored
button.
Move an application
4
1. Select an application, and press Wheel (a) to
display the options.
Operating
2. Use w/s to select [Move], and press Wheel
(a).
3. Use w/s/a/d to select a position you want
to move to, and press Wheel (a).
Delete an application
1. Select an application, and press Wheel (a) to
display the options.
2. Use w/s to select [Delete], and press Wheel
(a).
3. Use a/d to select [OK], and press Wheel (a)
to confirm.
,,Note
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
Troubleshooting 55
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turned on.
yy Plug the power cord into the wall outlet securely.
The unit does not start
playback.
yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Insert the disc with the playback side down.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
yy Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
yy If you use an USB extension cable or USB HUB, the USB devices may
not be recognized.
yy An USB device which requires additional program installation when
you have connected it to a computer is not supported.
yy This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music files.
yy The files are not recorded in a format that the unit can play.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The unit does not support the codec of the movie file.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or off.
The unit is not operating
normally.
You can reset the unit as follows.
yy Unplug the power cord, wait at least five seconds, and then plug it in
again.
5
Troubleshooting
The angle cannot be changed.
56 Troubleshooting
Network
Symptom
Cause & Solution
BD-Live feature does not work.
yy The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (see page 17).
yy Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
yy The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such
as YouTube™, etc.) are often
stopped or “buffer” during
playback.
yy Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
Media servers are not displayed yy The firewall or anti-virus software on your media server is running.
Turn off the firewall or anti-virus software running on your media
on the device list.
server.
yy The player is not connected to the local area network that your media
server is connected.
5
Troubleshooting
Cannot connect the player to
the access point or wireless
LAN router.
yy The wireless communication may be interrupted from household
devices that are using radio frequencies. Move the player away from
them.
Access point is not displayed
on the “Access point name” list.
yy The access point or wireless LAN router may not broadcast its SSID.
Set your access point to broadcast its SSID through your computer.
yy Your network device such as access point may not set with available
frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device
setting.
Troubleshooting 57
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears.
yy You are playing a disc recorded in a color system that is different from
your TV.
yy Set the resolution which your TV accepts.
Blu-ray 3D disc playback does
not output 3D views.
yy Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
yy Your TV may not support “HDMI 3D mandatory format”.
yy The [3D Mode] option in the [Settings] menu is set to [Off ].
Set the option to [On].
Customer support
Open source software notice
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit
http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are
available to download with the source code.
5
Troubleshooting
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com or contact LG Electronics customer care center.
58 Appendix
About Magic Remote
Control
To re-register the Magic remote
control
>>Caution
yy Use within an effective distance of 33 ft. (10
meters). Using the Remote Control from
greater distances or when obstructions
block the sight line may cause malfunctions.
yy Electronic devices nearby may cause
communication interference. Devices such
as microwave oven and wireless LAN use
the same frequency range (2.4 GHz) as the
Magic remote control, which may interfere
with the remote control.
yy The Magic remote control may be broken if
dropped or damaged in any other way.
yy Do not drop or subject the Magic remote
control to heavy impacts.
Press the HOME (b) and BACK (1) buttons at the
same time for about 5 seconds. The Magic remote
control will be unpaired with your unit.
,,Note
6
Appendix
yy Press the BACK (1) button while pointing
the remote control at the unit for 5 seconds
to reset and re-register it.
yy Set the speed and shape of the Magic
pointer that appears on the screen. Refer to
the setting the Magic pointer (page 30).
yy If the Magic pointer has not been used for
a certain period of time, it will disappear.
When the Magic pointer disappears from
the screen, shake the Magic remote control
to the right and left. Then, it appears again.
yy If you press the navigation button while
moving the Magic pointer on the screen,
the Magic pointer disappears, and the
Magic remote control works as a regular
remote control.
Appendix 59
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn off the player.
2. Use a/d to select a desired option and then
press Wheel (a).
Software update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
yy During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings
(page 17).
2. Select [Software] option in the [Settings] menu
then press Wheel (a).
3. Select [Update] option, and press Wheel (a).
Starts the software update.
[Cancel]
Exits the update menu and turns
the power off.
6
Option 2:
If the software update is available from the update
server, the “Update” icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
The player will check for the newest update.
,,Note
yy Pressing Wheel (a) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found.” appears. Press Wheel
(a) to return to the [Home] menu.
Appendix
[OK]
60 Appendix
4. If newer version exists, the message “Do you
want to download it?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. When downloading is completed, the message,
“Download is complete. Do you want to
update?” appears.
8. Select [OK] to start updating. (Selecting [Cancel]
will end the update and downloaded file will
not be re-usable. To update software the next
time, the software update procedure has to be
started from the beginning again.)
>>Caution
Do not turn off the power during the software
update.
9. When update is completed, the power will be
turned off automatically in a few seconds.
10. Turn the power back on. The system now
operates with the new version.
,,Note
6
Appendix
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to “Customer support” on page
57.
Appendix
61
Additional Information
File requirement
Video files
File
Location
File
Extension
Disc,
USB
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.vob”, “.3gp”,
“.mov”, “.trp”, “.m2t”,
“.mpe”, “.m1v”, “.m2v”,
“.wm”, ”.flv”, “.ts”, “.dat”,
“.rmvb”
DIVX3.11, DIVX4, DIVX5,
DIVX6, (standard
playback only)
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3), RV30, RV40
Dolby
Digital,
DTS, MP3,
WMA, AAC,
AC3, COOK
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub
(.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle
System (.txt)
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.mov”, “.trp”,
“.m2t”, “.mpe”, “.m1v”,
“.m2v”, ”.flv”, “.ts”
DIVX3.11, DIVX4, DIVX5,
DIVX6, (standard
playback only)
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3)
Dolby
Digital,
DTS, MP3,
WMA, AAC,
AC3
SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha
(.ssa/.txt), MicroDVD (.sub/.
txt), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle
System (.txt)
DLNA
Codec Format
Audio
Format
Subtitle
Audio files
File
Location
File
Extension
Sampling Frequency
Bitrate
Note
6
Disc,
USB
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free), “.flac”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320
kbps (MP3)
Some wav files are
not supported on
this player.
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free)
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320
kbps (MP3)
Some wav files are
not supported on
this player.
Appendix
DLNA
Photo files
File
Location
Disc,
USB,
DLNA
File
Extension
“.jpg”, “.jpeg”,
“.png”, “.gif”
Recommended
Size
Note
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
yy Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA
and WMV.
62 Appendix
,,Note
yy The file name is limited to 180 characters.
yy Maximum files/Folder: Less than 2000 (total
number of files and folders)
yy RMVB file only supports external subtitle.
yy Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
yy File compatibility may differ depending on
the server.
yy Because the compatibility on DLNA server
are tested on the bundle DLNA server
(Nero MediaHome 4 Essentials Windows
edition) environment, file requirements and
playback functions may differ depending on
media servers.
yy The file requirements on page 61 are
not always compatible. There may have
some restrictions by file features and media
server’s ability.
yy Playing video subtitle files are only available
on DLNA media server created by supplied
Nero MediaHome 4 Essentials software on
this player package.
6
,,Note
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
yy This player supports UTF-8 files even it
contains Unicode subtitle content. This
player can not support the pure Unicode
subtitle files.
yy Depending on the types of file or ways of
recording, it may not play back.
yy A disc which was recorded by multi-session
on normal PC is not supported on this
player.
yy To be playback a video file, video file name
and Subtitle file name must be the same.
yy When you play a video file with a extension
such as “.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp” or “.m2t”,
your player may not support subtitle files.
yy The total playback time of audio file
indicated on the screen may not correct for
VBR files.
yy Video / Audio codec compatibility may
differ depending on video file.
Appendix
yy The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
AVCHD (Advanced Video
Codec High Definition)
yy The total playback time of audio file
indicated on the screen may not correct for
VBR files.
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy HD video files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
yy The AVCHD format is a high definition digital
video camera format.
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
Appendix 63
About DLNA
Compatibility notes
This Player is a DLNA Certified digital media player
that can display and play video, photo and audio
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software or
other devices may be required. Please refer to the
operating instructions for the software or device for
more information.
Certain system requirements
For high definition video playback:
yy High definition display that has HDMI input jack.
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-inpicture function. For the playback method, refer
to the instructions in the disc.
yy Viewing high-definition content and upconverting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
yy Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection for the audio output of the
unit.
yy You can use an USB device to store some disc
related information, including downloaded
online content. The disc you are using will
control how long this information is retained.
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
6
yy An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
Appendix
yy Main, Center, surround speakers and subwoofer
as necessary for chosen format.
64 Appendix
Audio Output Specifications
OPTICAL (DIGITAL AUDIO OUT) *3
Jack/Setting
Source
PCM Stereo
DTS Re-encode *4
BitStream
Dolby Digital
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
DTS
Dolby Digital
Dolby TrueHD
PCM 2ch
DTS 2ch
Dolby Digital
AAC
PCM 2ch
DTS
AAC
DTS
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
DTS
DTS
Linear PCM 2ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 5.1ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 7.1ch
PCM 2ch
DTS
PCM 2ch
Jack/Setting
Source
6
HDMI OUT
BitStream *1 *2
PCM Stereo
PCM Multi-Ch
DTS Re-encode *4
Dolby Digital
PCM 2ch
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
PCM 2ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 2ch
PCM 2ch
DTS 2ch
Dolby TrueHD
AAC
PCM 2ch
PCM 2ch
DTS
AAC
DTS
PCM 2ch
PCM 5.1ch
DTS
DTS
DTS-HD
PCM 2ch
PCM 7.1ch
DTS
DTS-HD
Appendix
Linear PCM 2ch
PCM 2ch
PCM 2ch
DTS
Linear PCM 2ch
Linear PCM 5.1ch
PCM 2ch
PCM 5.1ch
DTS
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 7.1ch
DTS
Linear PCM 7.1ch
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [BitStream]. (Except
LPCM Codec : the output always include
interactive and secondary audio.)
*2 This player automatically selects the HDMI audio
according to the decoding capability of the
connected HDMI device even though [Digital
Output] option is set to [BitStream].
*3 On the PCM audio output, the sampling
frequency of DIGITAL AUDIO OUT is limited to
96 kHz.
*4 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[BitStream]).
y If the HDMI OUT jack is connected to your TV
with High Speed HDMI™ Cable and Dolby Digital
Plus/Dolby TrueHD is outputted from HDMI OUT
jack, DIGITAL AUDIO OUT jack is limited to “PCM
2ch” (When the HDMI and DIGITAL AUDIO OUT
are connected simultaneously).
Appendix 65
yy The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD during playback.
yy You must select a digital audio output and
a maximum sampling frequency that your
Amplifier (or AV receiver) accepts using [Digital
Output] and [Sampling Freq.] options on the
[Settings] menu (page 27).
yy With digital audio connection (DIGITAL AUDIO
OUT or HDMI OUT), Disc Menu button sounds of
BD-ROM may not be heard if the [Digital Output]
option is set to [BitStream].
yy If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
yy Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.
6
Appendix
66 Appendix
Area Code List
Choose an area code from this list.
Area
6
Code Area
Code Area
Code Area
Code
Appendix
Afghanistan
AF Fiji
FJ Monaco
MC Singapore
SG
Argentina
AR Finland
FI Mongolia
MN Slovak Republic
SK
Australia
AU France
FR Morocco
MA Slovenia
Austria
AT Germany
DE Nepal
NP South Africa
ZA
Belgium
BE Great Britain
GB Netherlands
NL South Korea
KR
Bhutan
BT Greece
GR Antilles
AN Spain
ES
Bolivia
BO Greenland
GL New Zealand
NZ Sri Lanka
LK
Brazil
BR Hong Kong
HK Nigeria
NG Sweden
SE
Cambodia
KH Hungary
HU Norway
NO Switzerland
CH
Canada
CA India
IN Oman
OM Taiwan
TW
Chile
CL Indonesia
ID Pakistan
PK Thailand
China
CN Israel
IL Panama
PA Turkey
TR
Colombia
CO Italy
IT Paraguay
PY Uganda
UG
Congo
CG Jamaica
JM Philippines
PH Ukraine
UA
Costa Rica
CR Japan
JP Poland
PL United States
US
Croatia
HR Kenya
KE Portugal
PT Uruguay
UY
Czech Republic
CZ Kuwait
KW Romania
RO Uzbekistan
UZ
Denmark
DK Libya
Ecuador
EC Luxembourg
EG Malaysia
Vietnam
RU Zimbabwe
SA
ZW
Egypt
LY Russian
LU Federation
MY Saudi Arabia
El Salvador
SV Maldives
MV Senegal
SN
Ethiopia
ET Mexico
MX
SI
TH
VN
Appendix 67
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Code
Language
Code
Language
Code
Language
Code
Afar
6565
French
7082
Lithuanian
7684
Sindhi
8368
Afrikaans
6570
Frisian
7089
Macedonian
7775
Singhalese
8373
Albanian
8381
Galician
7176
Malagasy
7771
Slovak
8375
Amharic
6577
Georgian
7565
Malay
7783
Slovenian
8376
Arabic
6582
German
6869
Malayalam
7776
Spanish
6983
Armenian
7289
Greek
6976
Maori
7773
Sudanese
8385
Assamese
6583
Greenlandic
7576
Marathi
7782
Swahili
8387
Aymara
6588
Guarani
7178
Moldavian
7779
Swedish
8386
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tagalog
8476
Bashkir
6665
Hausa
7265
Nauru
7865
Tajik
8471
Basque
6985
Hebrew
7387
Nepali
7869
Tamil
8465
Bengali; Bangla
6678
Hindi
7273
Norwegian
7879
Telugu
8469
Bhutani
6890
Hungarian
7285
Oriya
7982
Thai
8472
Bihari
6672
Icelandic
7383
Panjabi
8065
Tonga
8479
Breton
6682
Indonesian
7378
Pashto, Pushto
8083
Turkish
8482
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkmen
8475
Burmese
7789
Irish
7165
Polish
8076
Twi
8487
Byelorussian
6669
Italian
7384
Portuguese
8084
Ukrainian
8575
Chinese
9072
Japanese
7465
Quechua
8185
Urdu
8582
Croatian
7282
Kannada
7578
Rhaeto-Romance 8277
Uzbek
8590
6
Czech
6783
Kashmiri
7583
Rumanian
8279
Vietnamese
8673
Danish
6865
Kazakh
7575
Russian
8285
Volapük
8679
Dutch
7876
Kirghiz
7589
Samoan
8377
Welsh
6789
English
6978 Korean
7579
Sanskrit
8365
Wolof
8779
Appendix
Esperanto
6979 Kurdish
7585
Scots Gaelic
7168
Xhosa
8872
Laotian
7679
Serbian
8382
Yiddish
7473
Latin
7665
Serbo-Croatian
8372
Yoruba
8979
Latvian, Lettish
7686
Shona
8378
Zulu
9085
Lingala
7678
Estonian
6984
Faroese
7079
Fiji
7074
Finnish
7073
68 Appendix
Trademarks and
Licenses
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
Java is a trademark of Oracle and/or its affiliates.
6
Appendix
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
“x.v.Color” is a trademark of Sony Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195; 7,272,567 & other
U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol
together are registered trademarks & DTS-HD
Master Audio is a trademark of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a trademark of
the Wi-Fi Alliance.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
Appendix 69
Gracenote®, Gracenote logo and logotype,
and the “Powered by Gracenote” logo are
either registered trademarks or trademarks of
Gracenote, Inc. in the United States and/or other
countries.
Music recognition technology and related data
are provided by Gracenote®.
Portions of the content is copyright © Gracenote
or its providers.
Gracenote® End User License Agreement
This application or device contains software from
Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote (the
“Gracenote Software”) enables this application to
perform disc and/or file identification and obtain
music-related information, including name, artist,
track, and title information (“Gracenote Data”) from
online servers or embedded databases (collectively,
“Gracenote Servers”) and to perform other
functions. You may use Gracenote Data only by
means of the intended End-User functions of this
application or device.
You agree that your non-exclusive license to use
the Gracenote Data, the Gracenote Software, and
Gracenote Servers will terminate if you violate
these restrictions. If your license terminates, you
agree to cease any and all use of the Gracenote
Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under no
circumstances will Gracenote become liable for
any payment to you for any information that you
provide. You agree that Gracenote, Inc. may enforce
its rights under this Agreement against you directly
in its own name.
The Gracenote Software and each item of
Gracenote Data are licensed to you “AS IS.”
Gracenote makes no representations or warranties,
express or implied, regarding the accuracy of any
Gracenote Data from in the Gracenote Servers.
Gracenote reserves the right to delete data from
the Gracenote Servers or to change data categories
for any cause that Gracenote deems sufficient. No
warranty is made that the Gracenote Software or
Gracenote Servers are error-free or that functioning
of Gracenote Software or Gracenote Servers will
be uninterrupted. Gracenote is not obligated to
provide you with new enhanced or additional data
types or categories that Gracenote may provide in
the future and is free to discontinue its services at
any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE DOES NOT
WARRANT THE RESULTS THAT WILL BE OBTAINED
BY YOUR USE OF THE GRACENOTE SOFTWARE
OR ANY GRACENOTE SERVER. IN NO CASE WILL
GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES OR FOR ANY LOST
PROFITS OR LOST REVENUES.
© Gracenote, Inc. 2009
6
Appendix
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only. You
agree not to assign, copy, transfer or transmit the
Gracenote Software or any Gracenote Data to any
third party. YOU AGREE NOT TO USE OR EXPLOIT
GRACENOTE DATA, THE GRACENOTE SOFTWARE,
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY
PERMITTED HEREIN.
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The purpose of
a randomly assigned numeric identifier is to allow
the Gracenote service to count queries without
knowing anything about who you are. For more
information, see the web page for the Gracenote
Privacy Policy for the Gracenote service.
70 Appendix
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To
request additional information about Cinavia by
mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2012
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
6
Appendix
Appendix
71
Specifications
General
Power requirements
Refer to main label on the rear panel.
Power consumption
16 W
Dimensions (W x H x D)
Approx. 430 mm x 37.5 mm x 203 mm
Net Weight (Approx.)
1.6 kg
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 90 %
Outputs
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector)
DIGITAL AUDIO OUT (OPTICAL)
3 V (p-p), Optical jack x 1
System
Laser
Semiconductor laser
Wavelength
405 nm / 650 nm
Signal system
Standard PAL/NTSC color TV system
LAN port
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Wireless LAN (internal antenna)
Integrated IEEE 802.11n (5 GHz and 2.4 GHz bands) wireless
networking access, compatible with 802.11a/b/g Wi-Fi networks.
Bus Power Supply (USB)
DC 5 V 0 500 mA
yy Design and specifications are subject to change without notice.
6
Appendix
72 Appendix
Maintenance
Notes on discs
Handling discs
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Maintaining the unit
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Appendix 73
Important Information
Relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a “Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-todate information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6
Appendix
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Blu-Ray player Black
  • Video formats supported: 3GP, AVC, AVCHD, DAT, DIVX, FLV, M4V, MKV, MOV, MP4, MPEG1, MPEG2, TS, VOB, WMV
  • Audio formats supported: AAC, FLAC, LPCM, MP3, WMA
  • DTS-HD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
  • Video upscaling
  • 3D
  • Ethernet LAN Wi-Fi
  • Browsing

Related manuals

Download PDF

advertisement