LG | 26LU30D | User guide | LG 26LU30D User guide

LG 26LU30D User guide
ENGLISH
OWNER’S MANUAL
LCD TV
26LU3***
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
CONTENTS
ACCESSORIES ................................................ III
PREPARATION
Front Panel Controls .......................................... IV
Back Panel Information ...................................... V
Stand Installation ............................................. VI
Detaching Stand............................................... VI
Back Cover for Wire Arrangement ...................VII
Attaching the TV to a desk...............................VII
Kensington Security System...........................VIII
Careful installation advice...............................VIII
Desktop Pedestal Installation ...........................IX
Wall Mount:Horizontal Installation .....................IX
Remote Control Key Functions..........................X
EXTERNAL EQUIPMENT SETUP
Antenna Connection............................................ 1
External Equipment Setup ........................................ 2
Supported Display Resolution .............................5
Screen Setup for PC mode ................................6
WATCHING TV / PROGRAMME CONTROL
Turning on the TV ............................................. 10
Initializing Setup .............................................. 10
ProgrammeSelection ........................................10
Volume Adjustment ..........................................10
Quick Menu .......................................................10
On Screen Menus Selection and adjustment ...12
Auto programme tuning ...................................13
Manual programme Tuning ............................... 14
Programme Edit ............................................... 17
BOOSTER(IN AIR DIGITAL MODE) ................ 20
Software Update............................................... 21
Picture/Sound test ............................................. 23
Signal test ........................................................ 24
Product/service information...............................
.. 25
Simple Manual .................................................. 26
Selecting the Programme List ........................... 27
Input List ............................................................ 29
Input Label ........................................................ 30
SIMPLINK.......................................................... 31
AV Mode ............................................................ 34
Initializing(Reset to original factory settings) ....35
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL SIGNAL)
Switch on/off EPG .............................................37
Select a programme ..........................................37
Button Function in NOW/NEXT Guide Mode ...37
Button Function in 8 Day Guide Mode .............38
Button Function in Date Change Mode ............39
Button Function in Extended Description Box ..39
Button Function in Remind Setting Mode..........40
Button Function in Schedule List Mode ...........40
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ..................41
Picture Wizard ...................................................43
Energy Saving ...................................................44
Preset Picture Settings .....................................45
Manual Picture Adjustment ...............................46
Picture Improvement Technology......................47
Expert Picture Control .......................................48
Picture Reset .....................................................51
Power Indicator ................................................52
MHEG Guide ....................................................53
Mode Setting .....................................................54
Demo Mode.......................................................55
I
CONTENTS
SOUND & LANGUAGE CONTROL
CONTENTS
Auto Volume Leveler ......................................... 56
Clear Voice II ..................................................... 57
Preset Sound Settings-Sound Mode ................ 58
Sound Setting Adjustment -User Mode ............ 59
Infinite Sound .................................................... 59
Balance ............................................................ 60
TV Speakers On/ Off Setup ............................. 61
DTV Audio Setting (in digital mode only) ......... 62
Selecting Digital Audio out ............................... 63
Audio Reset ...................................................... 64
Stereo/Dual Reception (In Analogue Mode Only) .. . 65
NICAM Reception (In Analogue Mode Only) .... 66
Speaker Sound Output Selectio n . . . . . . . . . . . . . . . . . . . ..
.. 66
ON-SCREEN MENU LANGUAGE/COUNTRY/
AREA SELECTION .............................................67
Language Selection (In digital mode only) ........ 68
TIME SETTING
Clock Setup .....................................................7 0
Auto on/off time setting ..................................71
Sleep Timer setting .......................................... 72
II
PARENTAL CONTROL / RATINGS
Set Password & Lock System...........................73
Block Programme..............................................74
External Input Blocking .....................................75
Key Lock............................................................76
DIGITAL TELETEXT
Teletext within digital service.................................77
Teletext in digital service.....................................78
APPENDIX
Troubleshooting .................................................79
Maintenance .....................................................
. 81.
Product Specifications .. ...................................82
Open source sofware notice...................................83
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
This item is not included for all models.
Owner’s Manual
Batteries
(AAA×2)
Polishing Cloth
Polishing cloth for use on the screen.
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
PREPARATION
Owner's
Manual
Do not use excessive force. This may cause
scratching or discolouration.
Power Cord
Remote Control
***
x3
1-screw for stand fixing
Cable Holder
(Refer to p.VII)
Separate purchase
Wall Mounting Bracket
LSW100B or
LSW100BG
Bolts for stand assembly
(Refer to p.VI)
(Refer to p.VII)
Use screws 12mm(+0.5/-0.5) long on the SET
assembly side.
Set assembly side
(with guide spacer)
Set assembly side
(without guide spacer)
12mm
12mm
Guide spacer
III
PREPARATION
FRONT PANEL CONTROLS
NOTE
►TV can be placed in standby mode in order to reduce the power consumption.
► The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
PREPARATION
CAUTION
► When the TV cannot be turned on with the remote control, press the main power button on the TV.
(When the power is turned off with the main power button on the TV, it will not be turned on with the
remote control).
Do
not step on the glass stand or subject it to any impact.
►
It may break, causing possible injury from fragments of glass, or the TV may fall.
► Do not drag the TV. The floor or the product may be damaged.
■ Image shown may differ from your TV.
PROGRAMME
P
VOLUME
OK
OK
MENU
MENU
INPUT
Speaker
INPUT
POWER
Rem ote Control Senso r
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates white when the TV is switched on.
IV
SERVICE ONLY
PREPARATION
BACK PANEL INFORMATION
H/P
1
4
4
3
2
5
HDMI / DVI IN
7
3
12
66
AV IN
2
2
VIDEO L/ MONO AUDIO R
1
1
11
PREPARATION
HDMMI IN 2
■ Image shown may differ from your TV.
8
Power Cord Socket
This TV operates on an AC power.The voltage is indicated on the Specifications page.
(► p. 82) Never attempt to operate the TV
on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
4
RGB/DVI Audio Input
Connect the audio from a PC.
5
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
6
Component Input
Connect a component video/audio device to
these jacks.
ANTENNA IN
CABLE IN
9
10
7
RGB IN Input
Connect the output from a PC.
8
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
9
Antenna Input
Connect antenna to this jack.
10
Cable Input
Connect cable signals to this jack.
11
USB Input (SERVICE ONLY)
12
Headphone Socket
Plug the headphone into the headphone
socket.
V
PREPARATION
STAND INSTALLATION
Image shown may differ from your TV
PREPARATION
When assembling the desk type stand, check whether the
bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten
the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
1
2
DETACHING STAND
Image shown may differ from your TV.
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Loose the bolts and then detach the stand from
TV.
3
Loose the bolts and then detach the C o v e r
Base from T V.
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Fix the 3 bolts securely using the holes asshown.
Cover Base
4
Detach the St an d Bo d y from T V.
St and B ody
VI
PREPARATION
BACK COVER FOR WIRE
ARRANGEMENT
After Connecting the cables as necessary, install
CABLE HOLDER to bundle the cables.
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be pulled
in a forward/backward direction, potentially causing
injury or damaging the product. Use only an attached
screw.
PREPARATION
Image shown may differ from your TV.
ATTACHING THE TV TO A
DESK
1-Screw (provided as parts of the product)
Stand
Desk
! WARNING
To prevent TV from falling over, the TV should
be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking
the machine may cause injury.
VII
PREPARATION
KENSINGTON SECURITY
SYSTEM
PREPARATION
■ This feature is not available for all models.
■ Image shown may differ from your TV.
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kensington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as notebook PCs and LCD projectors.
NOTE
► The Kensington Security System is an optional
accessory.
► If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on.
This is normal, there is nothing wrong with TV.
► Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
► Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion
effects on the screen.
CAREFUL INSTALLATION
ADVICE
■■ You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
■■ Position the TV close to the wall to avoid the
possibility of it falling when pushed.
■ The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
1
1
2
2
1
2
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
3
3
Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
NOTE
► When moving the TV undo the cords first.
► Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
► To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
VIII
PREPARATION
The TV can be installed in various ways such as on
a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
≥ 4 inches
≥4 inches
PREPARATION
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate
circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
≥ 4 inches
≥ 4 inches
≥4 inches
Power Supply
Circuit breaker
DESKTOP PEDESTALINSTALLATION
For adequate ventilation allow a clearance of 4” (10cm)
all around the TV.
≥4 inches
≥4 inches
≥4 inches
≥4 inches
WALLMOUNT: HORIZONTAL
INSTALLATION
Model
Item
26LU3***
VESA Standard
(A * B)
Screw Quantity
200 * 100
M4
4
We recommend the use of a LG Br and wall mounting brac
-ket when mounting the TV to a w all .
We r ecommend that y ou pu rchase a w all mounting bracket
which supports VESA standard.
LG recommends that wall mounting be performed by a
qualified professional installe r.
NOTE
► Should Install wall mount on a solid wall per pendicular
to the floor.
► Should use a special wall mount, if you want to install
it to ceiling or slanted wall.
► The surface that wall mount is to be mount ed on
should be of sufficient strength to support the weight
of TV set; e.g. concrete, nat ural rock, brick and
hollow block.
► Installing screw type and length depends on the wall
mount used. Further information, refer to the instructions included with the mount.
► LG is not liable for any accidents or damage to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may
cause TV to fall and cause personal injury.
- Not following the recommended Installation
method.
IX
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
PREPARATION
POWER Switches the TV on from standby or off to standby.
ENERGY Adjust the Energy Saving mode of the TV.(► p.44)
SAVING
ENERGY
AV MODE
AV MODE It helps you select and set images and sounds
/
INPUT
TV/
RAD
INPUT External input mode rotate in regular sequence.(►
p.29)
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
TV/RAD Selects Radio, TV and DTV channel.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table. (► p.27)
Q.VIEW Returns to the previously viewed programme.
MARK
FAV
RATIO
MENU Selects a menu.
P
GUIDE Shows programme schedule.(► p.36)
P
A
G
E
Q. MENU Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio, Sleep Timer, Skip Off/On, USB Device).
(► p.11)
MUTE
MENU
GUIDE
Q.MENU
BACK Allows the user to move return one step in an interactive application, EPG or other user interaction
function.
EXIT Clears all on-screen displays and returns to TV
viewing from any menu.
OK
INFO i Shows the present screen information.
BACK
INFO
EXIT
THUMBSTICK Allows you to navigate the on-screen menus and
(Up/Down/Left/Right) adjust the system settings to your preference.
OK Accepts your selection or displays the current
mode.
1
Coloured These buttons are used for teletext (on TELETEXT
buttons models only), Programme edit .
1
DIGITAL These buttons are used for digital teletext.
TELETEXT For further details, see the ‘Digital Teletext’ section.(►p.77)
SUBTITLE Recalls your preferred subtitle in digital mode.
X
PREPARATION
VOLUME UP Adjusts the volume.
/DOWN
FAV Displays the selected favourite programme.
ENERGY
AV MODE
/
INPUT
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
RATIO Selects your desired Aspect Ratio of picture.
(► p.41)
MUTE Switches the sound on or off.
PREPARATION
MARK Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
TV/
RAD
Programme Selects a programme.
UP/DOWN
PAGE UP/ Move from one full set of screen information to the
DOWN next one.
MARK
FAV
RATIO
P
P
A
G
E
MUTE
MENU
GUIDE
Q.MENU
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(► p.31)
OK
BACK
INFO
MY MEDIA Menu Controls MY MEDIA menu(Photo List
and Music List).
control buttons
EXIT
Installing Batteries
■ Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
■ Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones.
■ Close cover.
■ To remove the batteries, perform the installation actions in
reverse.
XI
U
H/P HDMI IN 2
EXTERNAL EQUIPMENT SETUP
■ To prevent damage, do not connect to the mains outlet until all connections are made between the
devices.
VIDEO L/MONO AUDIO R
H/P HDMI IN 2
VIDEO L/MONO AUDIO R
Wall
Antenna
Socket
AV IN 2
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
AV IN 2
CABLE IN
VIDEO L/MONO AUDIO R
RF Coaxial Wire (75 ohm)
AV IN 1
VIDEO
L/MONO AUDIO
EXTERNAL EQUIPMENT SETUP
H/P HDMI IN 2
AV IN 2
USB IN
■ For optimum picture quality, adjust antenna direction.
■ The antenna cable and converter are not supplied.
USB IN
VIDEO L/MONO AUDIO R
ANTENNA CONNECTION
R
UHF
Antenna
Signal
Amplifier
ANTENNA IN
CABLE IN
VHF
■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
■ If signal needs to be split for two TVs,use an antenna signal splitter for connection.
1
EXTERNAL EQUIPMENT SETUP
External Equipment Setup
HDMI / DVI IN
VIDEO L/ MONO AUDIO R
1
H/P
Connect the audio output
of the external equipment
VIDEO L/ MONO AUDIO R
EXTERNAL EQUIPMENT SETUP
HDMMI IN 2
SERVICE ONLY
■ To avoid damaging any equipment, you should never plug in any power cord until you have
finished connecting all the equipments.
■ Image shown may differ from your TV.
AV IN
AV IN
ANTENNA IN
CABLE IN
same to 1
Camcorder
1
Wall Jack
PC
Antenna
Connect the video outputs of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO
2
Video Game Set
EXTERNAL EQUIPMENT SETUP
► HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.
Signal
Component
HDMI
480i/576i
480p/576p
720p/1080i
O
O
O
O
X
O
O
1080p
O
(24Hz/30Hz/50Hz/60Hz)
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Y
PB
PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
EXTERNAL EQUIPMENT SETUP
(50/60Hz only)
3
U
H/P HDMI IN 2
EXTERNAL EQUIPMENT SETUP
NOTE
H/P HDMI IN 2
VIDEO L/MONO AUDIO R
H/P HDMI IN 2
AV IN 2
VIDEO L/MONO AUDIO R
CAUTION
► Do not look into the optical output port. Looking at the laser
beam may damage your vision.
AV IN 2
VIDEO L/MONO AUDIO R
EXTERNAL EQUIPMENT SETUP
► If you have a mono VCR, connect the audio cable from
the VCR to the AUDIO L/MONO jack of the TV.
AV IN 1
4
USB IN
AV IN 2
USB IN
VIDEO L/MONO AUDIO R
► The TV can receive video and audio signals simultaneously when
using an HDMI cable.
► If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
► Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no
screen display can result. Please use the latest cables that support at
least HDMI version 1.3.
external equipment setup
SUPPORTED DISPLAY RESOLUTION
RGB-PC, HDMI/DVI-PC mode
HDMI/DVI-DTV mode
external
5
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
EXTERNAL EQUIPMENT SETUP
PICTURE
Move
• Sh
Sharpn
arpn
p ess
70
• Colour
70
• Tint
SCREEN
OK
Prev.
Resolution
0
R
G
• Colour Temp. C50
W
C
• Advanced Control
Auto Config.
Position
Size
►
• Picture Reset
Screen
•• Screen
Move
To Set
Yes
No
Phase
Reset
1
2
3
4
5
Select PICTURE.
Select Screen.
Select Reset.
Select Yes.
Run Reset.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
6
EXTERNAL EQUIPMENT SETUP
Auto Configure (RGB [PC] mode only)
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the
image is still not correct, your TV is functioning properly but needs further adjustment.
PICTURE
Move
• Sh
Sharpn
arpn
p ess
70
• Colour
70
• Tint
SCREEN
OK
Resolution
Auto Config.
0
R
G
• Colour Temp. C50
W
C
• Advanced Control
Position
Size
►
• Picture Reset
Screen
•• Screen
Prev.
Move
Auto Config.
Yes
No
Phase
Reset
1
2
3
4
5
Select PICTURE.
Select Screen.
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
Select Auto Config..
Select Yes.
Run Auto Config..
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
7
EXTERNAL EQUIPMENT SETUP
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
EXTERNAL EQUIPMENT SETUP
PICTURE
Move
• Sh
Sharpn
arpn
p ess
70
• Colour
70
• Tint
SCREEN
OK
Resolution
Auto Config.
0
R
G
• Colour Temp. C50
W
C
• Advanced Control
Prev.
1024 x 768
1280 x 768
1360 x 768
Size
►
• Picture Reset
Screen
•• Screen
Position
Move
Phase
Reset
1
2
3
4
Select PICTURE.
Select Screen.
Select Resolution.
Select the desired resolution.
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
8
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust
the picture phase manually.
This function works in the following mode : RGB[PC].
Move
• Sh
Sharpn
arpn
p ess
70
• Colour
70
• Tint
SCREEN
OK
Resolution
0
R
G
• Colour Temp. C50
W
C
• Advanced Control
2
3
4
▲
Auto Config.
Position
◄
►
►
Phase
Reset
1
Prev.
Size
• Picture Reset
Screen
•• Screen
Move
▼
EXTERNAL EQUIPMENT SETUP
PICTURE
Select PICTURE.
Select Screen.
Select Position, Size or Phase.
Make appropriate adjustments.
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
9
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the / I, INPUT or P
button on the TV or press the
POWER, INPUT, P
or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL
INITIALIZING SETUP
1
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can
adjust the City, Mode Setting, Auto Tuning.
Note:
a.If you close without completing the initial setting, the Initial Setting menu can be displayed
again.
b.Press the BACK button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might
not work, depending on the DTV broadcasting environment.
d."Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality
data, “Store Demo” mode initializes the product to the image quality set by us after a certain period
of time.
f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the
OPTION menu.
PROGRAMME SELECTION
1
Press the P
or NUMBER buttons to select a programme number.
VOLUME ADJUSTMENT
+ or - button to adjust the volume.
1
Press the
2
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
10
+ , - or AV Mode button.
WATCHING TV / PROGRAMME CONTROL
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
◄
Aspect Ratio
Sound Mode : It is a feature to automatically set the sound combination which it deems
the best for the images being watched.
Selects your desired Sound Mode.
Audio : Select the sound output.
Sleep Timer : Set the sleep timer.
Skip Off/On : Select the Skip Off/On.
ENERGY SAVING : It reduces the TV’s power
consumption.
►
16:9
WATCHING TV / PROGRAMME CONTROL
Aspect Ratio: Select your desired picture format.
For Zoom Setting, select 16:9,Just Scan,
Original,Full Wide,4:3,14:9, Zoom and
Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to
Q.Menu.
Clear Voice II : By differentiating the human
sound range from others, it helps users listen to human voices better.
Picture Mode : Select your desired Picture
Mode.
Exit
1
2
3
Display each menu.
Select your desired Source.
• Press the Q.MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
11
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
SETUP
Ɣ Auto
Move
OK
Tuning
Ɣ Manual
Tuning
Ɣ Programme
Ɣ Booster
WATCHING TV / PROGRAMME CONTROL
TIME
Edit
Ratio
Ɣ Picture
Wizard
Energy Saving
Ɣ Picture
OK
● Off
Time
: Off
● On
Time
: Off
Timer
: Off
Mode
Move
AUDIO
OK
Ɣ Auto
: 16:9
Ɣ Clear
: Vivid
Ɣ Sound
‡ Infinite Sound : Off
95
‡ Treble
50
‡ Brightness
50
‡ Bass
50
‡ Sh
Sharpn
arpness
arpn
ess
70
‡ Re
R sett
OPTION
LOCK
Move
Password
OK
OPTION
● Country/Area
● Block
Programme
● Input
Block
: Off
● Hard
of Hearing(
● Power Indicator
● MHEG Guide
● Factory
2
3
12
Select a menu item.
Move to the pop up menu.
OK
: HongKong
):Off
:Off
Reset
ID
● Mode
Display each menu.
Move
● Language(Language)
: On
● Set
1
L
: Standard
100
LOCK
Lock
3
‡ Contrast
TIME
● Key
: Off
0
Mode
OK
: Off
‡ Backlight
AUDIO
System
Voice II
Ɣ Balance
PICTURE
● Lock
Move
Volume
: Off
SETUP
● Set
● Clock
● Sleep
Ɣ Aspect
Ɣ
: On
Move
PICTURE
Setting
:1
: Home Use
• Press the red button, you can check the
Customer Support menu.
• Press the green button, you can check
the Simple manual menu.
• Press the menu/exit button to return to
normal TV viewing.
• Press the BaCK button to move to the previous menu screen.
R
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 500. But the number may be different which
depends on broadcasting signals.
SETUP
Move
● Auto Tuning
Antenna
Tuning
● Programme
Edit
● Booster
Antenna
: On
Cable
Cable
Check your TV signal connection.
The previous programme information
will be updated during Auto Tuning.
Automatic Numbering
Start
Close
1
2
3
4
Select SETUP.
Select Auto Tuning.
Select Start.
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
• If you wish to keep on auto tuning select
Start using the
button. Then, press
the OK button. Otherwise select Close.
• Automatic Numbering : Scramble
Channel is skipped in Auto Tuning and
Manual Tuning.
WATCHING TV / PROGRAMME CONTROL
● Manual
OK
Run Auto tuning.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
13
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
(IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
SETUP
● Auto
Move
SETUP
OK
Tuning
● Auto
WATCHING TV / PROGRAMME CONTROL
● Booster
►
● Programme
◄
Tuning
● Manual Tuning
►
● Manual Tuning
Move
Edit
● Programme
: On
Edit
● Booster
OK
DTV
►
UHF CH.
15
Frequency(kHz)
490000
: On
● Signal Strength
● Signal Quality
50%
50%
Add
Close
1
2
3
Select SETUP.
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
Select Manual Tuning.
Select DTV .
4
Select the desired channel number.
5
Select update or add if signal present.
When manually tuning, you use the figures that are set up at Auto Tuning for each of necessary item.
When the change is needed, please first perform Auto Tuning.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
14
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
(IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
● Auto
Move
SETUP
OK
Tuning
● Auto
● Programme
: On
Edit
● Booster
: On
TV
● Storage
● System
I
● System
V/UHF
● Channel
0
● Fine
◄►
● Search
◄►
● Name
2
3
4
5
6
Select SETUP.
Select Manual Tuning.
7
8
Select TV or Cable TV.
or
Select the desired
programme
number on.
9
◄
1
● Band
1
►
● Storage
C 01
or
Cable TV
►
1
DK
● Band
V/UHF
● Channel
1
● Fine
◄►
● Search
◄►
● Name
C 01
Store
Store
Close
Close
Select V/UHF or Cable.
or
Select the desired
channel number.
Commence searching.
WATCHING TV / PROGRAMME CONTROL
● Booster
Edit
OK
◄
● Manual Tuning
►
● Programme
►
● Manual Tuning
Move
Tuning
Select Store.
Select a TV system.
• Press the MENU button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• Use NUMBER buttons to input a 4-digit password in Lock System ‘On’.
• I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K (East Europe / China / Africa / CIS)
NTSC M : USA / Korea / Philippines
• To store another channel, repeat steps 4 to 9.
15
WATCHING TV / PROGRAMME CONTROL
SETUP
● Auto
Move
SETUP
OK
Tuning
● Auto
● Booster
►
● Programme
►
● Manual Tuning
Edit
OK
◄
● Manual Tuning
● Programme
: On
Move
Tuning
● Booster
Edit
TV
● Storage
: On
● System
● Band
● Storage
I
● System
0
● Fine
◄►
● Search
◄►
● Name
◄
1
V/UHF
● Channel
WATCHING TV / PROGRAMME CONTROL
16
►
or
C 01
Cable TV
►
1
DK
● Band
V/UHF
● Channel
1
● Fine
◄►
● Search
◄►
● Name
C 01
Store
Store
Close
Close
■ Assigning a station name
You can assign a station name with five characters to each programme number.
1
2
3
4
Select SETUP.
5
Select Manual Tuning.
Select TV or Cable TV.
6
Select Name.
7
Select the position and make
your choice of the second
character, and so on.
You can use an the alphabet
A to Z, the number 0 to 9, +/
-, and blank.
Select Close.
Select Store.
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
ton during TV viewing.
but-
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked
when you start Auto Tuning.
Programme Edit
Move
OK
Tuning
● Manual
Tuning
►
● Auto
DTV
● Booster
►
Programme
Edit
●●Manual
Tuning
Programme
Edit
: On
1/2 page
A
RADIO
TV
Cable TV
1 YLE TV1
2 YLE TV2
3 YLE FST
4 YLE24
5 YLE Teema
6 TV4 Stockholm
7 Kanal Lokal
8 CNN
9 TV4
10 TV4 Plus
14 TV400
15 TV4 Film
24 TV4 Fakta
25 MediaCorp HD5
36 SNY_SSU
84 Demo
85 TVE 1
86 TVE 2
87 24H TVE
88 CLAN/50 TVE
99 LA7
▼
Pr. Change
P
1
2
3
4
Page Change
FAV
Favourite Pr.
Q.MENU
Favourite Pr. Group
Previous
Block/Unblock
Skip
Select SETUP.
Select Programme Edit.
WATCHING TV / PROGRAMME CONTROL
SETUP
Favourite Group :
Enter the Programme Edit.
Select a programme to be stored or
skipped.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
17
WATCHING TV / PROGRAMME CONTROL
IN DTV/RADIO MODE
■ Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the programme number to blue.
3
BLUE Release.
• When programmes are to be skipped, the
skipped programme shows in blue and
these programmes will not be selected by
the P
buttons during TV viewing.
• If you wish to select a skipped programme,
directly enter the programme number with
the NUMBER buttons or select it in the
programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL
■ Locking a programme number
1
• It can be registered as Lock
programme even when Lock
System is turned Off.
Select a programme number to be locked.
2
YELLOW Turn the programme number to yellow.
3
YELLOW Release.
IN TV/Cable TV MODE
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
■ Deleting a programme
1
2
RED
Select a programme number to be deleted.
i
Appear
Do you want to delete
progamme?
Yes
No
3
Yes
No
Delete.
Release.
• The selected programme is deleted, all the
following programmes are shifted up one
■ Moving a programme
1
2
GREEN
18
Select a programme number to be moved.
Turn the programme number to
green.
3
GREEN Release.
WATCHING TV / PROGRAMME CONTROL
■ Selecting favourite programme
Favourite programmes are a convenient feature that lets you quickly scan up to programmes of your
choice without having to wait for the TV to scan through all the in-between programmes.
1
Select your desired programme.
2
Add corresponding programme to Favourite
list of current Favourite group.
3
■ Selecting favourite programme group
1
2
3
Select your desired programme.
Display a pop-up window where
Favourite group can be changed.
Select a Favourite group.
WATCHING TV / PROGRAMME CONTROL
Release.
19
WATCHING TV / PROGRAMME CONTROL
BOOSTER(IN AIR DIGITAL MODE)
If reception is poor select Booster to On.
When the signal is strong, select "Off".
● Manual
Booster
●●Booster
● Manual
Edit
Move
Tuning
● Programme
On
:: On
OK
Tuning
●●Booster
Booster
Edit
Off
: :On
On
On
Select SETUP.
2
Select Booster.
3
4
● Auto
Tuning
● Programme
1
SETUP
OK
►
Move
Tuning
►
● Auto
►
WATCHING TV / PROGRAMME CONTROL
SETUP
Select On or Off.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
20
WATCHING TV / PROGRAMME CONTROL
Software Update
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
But the actural situation is depending on the broadcasting signals of different area or different
broadcasting service.
Software Update
Picture Test
SETUP
PICTURE
Sound Test
AUDIO
Signal Test
Software Update
◄ On ►
● Current Version
00.00.01
Close
TIME
Press OK(
LOCK
) to set programme settings.
Customer Support
1
2
RED
Simple Manual
Exit
Select Customer Support.
Select Software Update.
Select On or Off.
• If you select On, a user confirm message box will
be displayed to notify that new software is found.
3
4
Close
OPTION
WATCHING TV / PROGRAMME CONTROL
Product/Service Info.
Save.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
21
Watching TV / Programme control
■■When setting “Software Update”
Occasionally, a transmission of
updated digital software information will result in the following
menu on the TV screen.
?
Software update is available.
Would you like to download now?
Yes
No
WATCHING TV / PROGRAMME CONTROL
22
Simple Update : for current
update stream
Download starts when "Yes" is
selected. At this time, progressing pop-up window does
not display.
Download progress status can
be checked from Software
Update menu.
Software Update
A window as display below
appears when download
completes.
TV is restarted when "Yes" is
selected.
New software version is ready. If you want
to install now, TV will be turned off and
restart. Continue?
◄ On ►
Software downloading progress.
Ver. 00.00.01 ► Ver.00.00.00
Yes
No
4%
Close
? A new software update is available at
00/00/0 00:00.
Do you want to update the software when
available?
Yes
No
Schedule Update : for scheduled
update stream
When the Software Update menu
is "Off", the message to change it
to "On" appears.
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Software Update menu.
• It may take hours to download the software, so make sure that the power stays on during the download.
• The software is downloaded only in Standby mode or in MUX with Software Update Service, and stops
when the power cord is unplugged or when viewing MUX without Software Update Service.
• When you return to Standby mode or MUX with Software Update Service, the software download will
resume from where it stopped.
WATCHING TV / PROGRAMME CONTROL
PICTURE/SOUND TEST
This function is a customer support function that can execute picture and sound tests.
SETUP
PICTURE
Software update
AUDIO
Picture Test
Sound Test
TIME
LOCK
Product/Service Info.
OPTION
Close
Press OK(
) to set programme settings.
Customer Support
1
2
3
Simple Manual
Exit
RED Select Customer Support.
Select Picture Test or Sound Test.
Select Yes or No.
Do you have a problem in this test
screen?
Yes
No
WATCHING TV / PROGRAMME CONTROL
Signal Test
?
23
WATCHING TV / PROGRAMME CONTROL
SIGNAL TEST
This function enables you to view information on the Manufacturer, Model/Type, and
Software Version.
This displays the information and signal strength of the tuned *MUX.
This displays the signal information and service name of the selected MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.))
WATCHING TV / PROGRAMME CONTROL
Engineering Diagnostics
Software update
Picture Test
SETUP
PICTURE
Sound Test
AUDIO
Signal Test
Test
Signal
Product/Service Info.
Close
TIME
LOCK
Manufacturer : LG Electronics Inc.
Model/Type : Global-P
Software Version : V00.00.01
OPTION
Ch 30
Ch 34
Ch 36
Ch 38
Ch 54
Ch 60
Press OK(
) to set programme settings.
Customer Support
1
2
3
4
Simple Manual
Exit
Prev.
Popup
MENU
RED Select Customer Support.
Select Signal Test.
Display Manufacturer, Model/Type and Software Version.
Display the information of Channel.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
24
Exit
WATCHING TV / PROGRAMME CONTROL
PRODUCT/SERVICE INFORMATION
This function is a customer support function that can see product/service information and customer service center
information.
SETUP
PICTURE
Software update
AUDIO
Picture Test
Sound Test
TIME
LOCK
OPTION
- MODEL/TYPE :
- Software version : 00.00.01
- Serial Number : SKY1107
- Used time : 49
- Customer service center :
- Homepage : http://www.lg.com
Close
Press OK(
Customer Support
1
2
3
Close
) to set programme settings.
Simple Manual
Exit
RED Select Customer Support.
Select Product/Service Info..
Display MODEL/TYPE, Software version, Serial Number,
Used time, Customer service center and Homepage.
WATCHING TV / PROGRAMME CONTROL
Signal Test
Product/Service Info.
Product/Service Info.
25
Watching TV / Programme control
Simple Manual
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
■■ Image shown may differ from your TV.
WATCHING TV / PROGRAMME CONTROL
SETUP
PICTURE
AUDIO
TIME
LOCK
OPTION
Press OK(
) to set programme settings.
Customer Support
1
2
Simple Manual
Exit
GREEN Select Simple Manual.
Select the part of the manual you want to see.
• Press the EXIT button to return to normal TV viewing.
26
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Programme List
1 BBC
►
Displayed when the
Programme is Locked .
Exit
►
Mini Glossary
2 BBC
3 BBC
4 BBC
■ Displaying programme LIST
1
Display the Programme List.
• You may find some blue programmes.
These have been set up to be skipped
in the programme edit mode.
• Some programmes with the channel num-
ber shown in the programme LIST indicate
there is no station name assigned.
BLUE
Turn the programme edit.
WATCHING TV / PROGRAMME CONTROL
Pr.Edit
■ Selecting a programme in the programme list
1
2
Select a programme.
Switch to the chosen programme number.
The mode will be switched
between DTV, RADIO, TV, Cable
TV,from the program you are currently watching.
27
WATCHING TV / PROGRAMME CONTROL
■ Paging through a programme list
1
Turn the pages.
2
Return to normal TV viewing.
Exit
Favourite List
◄ ►Favourite Pr. Group
◄
Group
B
►
►
1 BBC
2 BBC
►
WATCHING TV / PROGRAMME CONTROL
■ Displaying the favourite programme list
3 BBC
Pr.Reg.
1
Pr.Edit
BLUE
Turn the programme edit.
YELLOW
Current channel is registered/
cancelled as preferred channel on
currently selected Group.
Display the Favourite Programme List.
Favourite group is changed.
28
WATCHING TV / PROGRAMME CONTROL
INPUT LIST
By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode.
Input List
Cable
AV
Component
RGB
OK
HDMI1
HDMI2
Input Label
1
Select the input source.
Exit
• Antenna : Select it when watching the
DTV/TV.
• Cable : Select it when watching the Cable
DTV/Cable TV.
• AV : Select it when watching the VCR or
external equipment.
• Component : Select it when using the
DVD or the Digital set-top box depends on
connector.
• RGB :Select it when using PC depends on
connector.
• HDMI : Select it when using DVD, PC or
Digital set-top box depends on connector.
WATCHING TV / PROGRAMME CONTROL
Antenna
Move
29
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Select a label for each input source.
WATCHING TV / PROGRAMME CONTROL
Input Label
Input List
Antenna
Move
Cable
AV
Component
RGB
OK
◄
►
Component
◄
►
RGB
◄
►
HDMI 1
◄
►
HDMI 2
◄
►
HDMI1
HDMI2
Input Label
AV
Exit
▼
Close
1
2
3
BLUE Select Input Label.
Select the source.
Select the label.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
30
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
If you do not want SIMPLINK menu,select “Off”.
On
◄
Exit
►
Watch TV
DISC
VCR
VCR Recorder
HDD
◄ Speaker
TV Speaker
1
2
3
►
Display the SIMPLINK.
WATCHING TV / PROGRAMME CONTROL
OK
Select On or Off.
Save.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
31
WATCHING TV / PROGRAMME CONTROL
Connecting to Home Theater with the SIMPLINK logo.
1
Connect the HDMI/DVI IN 1 or HDMI IN 2
terminal on the back of the TV and the
HDMI output terminal of the Home Theater
using HDMI cables.
2
WATCHING TV / PROGRAMME CONTROL
3
Connect the Digital Audio output terminal on
the back of the TV and the Digital Audio input
terminal of the Home Theater using optical
cables.
Select Home Theater in the Speaker menu by
pushing the SIMPLINK button.
► When you select or operate a media device with
home theater function, the speaker automatically
switches to home theater speaker (HT speaker).
HDMI / DVI IN
2
VIDEO L/ MONO AUDIO R
1
AV IN
1
HDMI / DVI IN
DIGITAL
AUDIO OUT
the Home Theater
NOTE
► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK
device with the HDMI cable.
► When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK.
32
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
SIMPLINK Menu
Press the
1
2
3
4
5
button and then OK button to select the desired SIMPLINK source.
TV viewing : Switch to the previous TV programme regardless of the current mode.
DISC playback : Select and play connected
discs.
When multiple discs are available, the titles of
discs are conveniently displayed at the bottom of the screen.
VCR playback : Play and control the connected VCR.
HDD Recordings playback : Play and control recordings stored in HDD.
OK
On
◄
Exit
►
1
Watch TV
Selected Device
2
DISC
3
VCR
When a device is connected (displayed in
bright colour)
4
VCR Recorder
HDD
5
◄ Speaker
TV Speaker
►
WATCHING TV / PROGRAMME CONTROL
Disc playback
Control connected AV devices by pressing the
, OK, ►, ▀, l l, ◄◄ and ►► buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, the TV will change automatically
to turn on mode.
* A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK,
does not provide this function.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used.
(*CEC: Consumer Electronics Control).
When device is not connected (displayed in
gray)
Audio Out to Home theater/Audio Out to
TV: Select Home theater or TV speaker for
Audio Out.
33
WATCHING TV / PROGRAMME CONTROL
AV MODE
You can select the optimal images and sounds.
Off
Cinema
Sport
Game
WATCHING TV / PROGRAMME CONTROL
1 AV MODE
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
Off
Cinema
Game
Sport
Press the AV MODE button repeatedly to select the desired source.
2
• If you select Cinema in AV mode, Cinema will be selected both for
Picture Mode and Sound Mode in PICTURE menu and AUDIO menu
respectively.
• If you select “Off” in AV mode, the picture and image which you initially
set will be selected.
34
WATCHING TV / PROGRAMME CONTROL
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings.
But the settings of
Day and
Night of the Picture Mode cannot be initialized.
It is useful to initialize the product or when you move to other city or country.
When the Factory Reset is completed, you must restart the Initializing setup.
When the Lock System menu is "On", the message to enter the password appears.
Move
: HongKong
● Country/Area
: HongKong
● Hard
):Off
● Hard
):Off
All user settings and channel settings will be
reset. Still Continue?
: Off
• MHEG Guide
of Hearing(
Indicator
ID
• Mode Setting
4
►
►
● Set
of Hearing(
● Power
● Factory Reset
3
OK
● Country/Area
● Power
2
Move
● Language(Language)
• MHEG Guide
1
OPTION
OK
● Language(Language)
Indicator
:1
● Set
: Home Use
• Mode Setting
Select OPTION.
: Off
● Factory Reset
ID
Yes
No
:1
: Home Use
• In Lock System "On", if you forget your
password, press '0', '3', '2', '5' on the
remote control handset.
WATCHING TV / PROGRAMME CONTROL
OPTION
Select Factory Reset.
Select Yes.
Start Factory Reset.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
35
EPG(ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL SIGNAL)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible
viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In
addition, detailed information about the programme is often available in the EPG (the availability and
amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies
The EPG displays the programme details for the next 8 days.
►
DTV 1 TV ONE
►
Pr. Change
► Next
Watch
Good Morning
21:00
00:00
Show/Game Show
16:9
720p
... AAC
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with
ith reggular
l andd spe
p cial
i l gue
g sts
sts.
t
▼
Up
Down
Show current programme information
Displayed with a Teletext Programme.
Displayed with a Radio Programme.
Displayed with a Subtitle Programme.
Displayed with a MHEG Programme.
Displayed with a Scramble Programme.
Displayed with a HE-AAC Programme.
Displayed with a Dolby Digital Programme.
Aspect ratio of broadcasting programme.
Displayed with a Dolby Digital PLUS Programme.
Aspect ratio of broadcasting programme.
576i/p, 720p, 1080i/p : Resolution of broadcasting programme
Broadcasted programme with the icon may not be displayed in Monitor Out depending on the information of the programme.
Show next programme information.
Tyra
2 TV2
28 Sep. 2008 21:00~00:00
►
DTV 2 TV2
►
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
he-aaC
Displayed with a TV or DTV Programme.
Remind
Tyra
21:00
Close
00:00
Show/Game Show
Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.
Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.
A pop-up window for remind settings
appears.
Select Timer Remind setting mode.
36
Pr. Change
◄ Now
Schedule
EPG (ELECTRONIC PROGRAMME GUIDE)
Switch on/off EPG
1
Switch on or off EPG.
Select a programme
1
or
Select desired programme.
2
The EPG will disappear after moving
to a selected program.
Button Function in NOW/NEXT Guide Mode
You can view a program being broadcasted and one scheduled to follow.
Change EPG mode.
Programme Guide
▲
That ’70s show
Nov. 25, 2008 10:05
1 YLE TV1 25 Nov. 2008 09:45~10:15
YELLOW
Enter Manual Timer mode.
ALL
NOW
1 YLE TV1
2 YLE TV2
BLUE
Enter Schedule List mode.
When ‘Now’ is selected, it is moved to
selected program and EPG disappears
When ‘Next’ is selected, a reservation
pop-up window appears.
4 TV..
5 YLE FST
6 CNN
8 YLE24
FAV Favourite
NEXT
That ’70s show
Your World Today
Legenen om Den....
Naturtimmen
Lyssna
Glamour
▼
INFO i Information
Mode
Keno
World Business
Fantomen
Kritiskt
ABC
Tänään otsikoissa
Watch/Schedule
TV/RAD RADIO
Manual Timer
or
or
Schedule List
Switch off EPG.
Select NOW or NEXT Programme.
Select TV or RADIO Programme.
Select the Broadcast Programme.
Detail information on or off
Page Up/Down.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
RED
37
EPG (ELECTRONIC PROGRAMME GUIDE)
Button Function in 8 Day Guide Mode
Programme Guide
▲
That ’70s show
Change EPG mode.
ALL
15:00
▼
Kungskonsumente
Antigues Roadshow
The Drum
Mint Extra
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
2 YLE TV2
Enter Date setting mode.
4 TV..
5 YLE FST
6 CNN
YELLOW
8 YLE24
Enter Manual Timer mode.
FAV Favourite
BLUE
Enter Schedule List mode.
When ‘Now’ is selected, it move to
selected program and EPG disappears
When ‘Next’ is selected, a reservation
pop-up window appears.
Select a Programme.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
38
Select the Broadcast Programme.
Mode
Tue, Nov. 25
14:00
1 YLE TV1
GREEN
◄
RED
Nov. 25, 2008 10:05
1 YLE TV1 25 Nov. 2008 09:45~10:15
◄
...
▼
INFO i Information
Date
Watch/Schedule
Manual Timer
TV/RAD RADIO
Schedule List
Page Up/Down.
or
or
Switch off EPG.
Select TV or RADIO Programme.
Detail information on or off
EPG (ELECTRONIC PROGRAMME GUIDE)
Button Function in Date Change Mode
Change to the selected date.
Programme Guide
▲
That ’70s show
Nov. 25, 2008 10:05
1 YLE TV1 25 Nov. 2008 09:45~10:15
◄
ALL
4 TV..
5 YLE FST
6 CNN
8 YLE24
Switch off Date setting mode.
15:00
▼
2 YLE TV2
Select a date.
Tue. 25 Nov.
14:00
1 YLE TV1
...
◄
GREEN Switch off Date setting mode.
Kungskonsumente
Antigues Roadshow
The Drum
Mint Extra
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
▼
Date Change
Date Exit
or
or
Switch off EPG.
Text Up/Down.
1 YLE TV1 25
25 Nov. 2008 10:05
Fia World Touring Car Chanpionship
Tue. 25 Nov. 2008 10:05
12:40
Select Timer Remind setting mode.
or
The detail information on or off.
or
Switch off EPG.
Fia Champion
Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's
Haunted house/Cry of The Swamp; Miss Gotto's Haunted
house/Cry of The Swamp; Miss Gotto's Haunted house/Cry
of The Swamp; Miss Gotto's Haunted house/Cry of The
Swamp; Miss Gotto's Haunted house/Cry of The Swamp;
Remind
Close
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Extended Description Box
39
EPG (ELECTRONIC PROGRAMME GUIDE)
Button Function in Remind Setting Mode
Sets only a start time for the reminder with the end time grayed out.
Manual Timer
Switch off Manual Timer mode.
Select the date to schedule.
Sun.
Select Start Time, End time or
Programme.
Mon.
Tue.
Wed., Aug. 12 2009 13:46
Wed.
Thu.
Select
10 the date
11 to remind
12
09
16
17 Time18
Start
Fri.
13
End19Time
14
Sat.
Wed. 12 Aug. 2009
15
20
21
Programme
22
DTV
27 801 ANTV
28D...
29
No schedule list
▲
YELLOW Change to Guide mode.
BLUE
1524 :
23
0925
17 26
: 30
▼
30
Change to Schedule List mode.
31
01
02
Move
OK
05
04
Prev.
Repeat Option
Programme Guide
Exit
Schedule List
Save Timer Remind.
If you’ve created a schedule list, a scheduled program is displayed at the scheduled time even when
you are watching a different program at the time.
Only the Up/Down/OK/Back keys will work when a popup window is open.
Schedule List
Page1/1
Start Date
YELLOW Change to Manual Timer mode.
Select Schedule List.
Page Up/Down.
6 May
16:00
Friend1
6 May
18:00
Friend2
Repeat
Friend2
18:00
Modify
Delete All
Remind
DTV 19 Dave
(Fri.)06/05/2007
16:00
Move
Manual Timer
Select your desired Option(Modify/Delete/
Delete All).
Title
Delete
Change to Guide mode.
Switch off Schedule List.
Fri., Apr. 6 2007 15:09
Start Time
Close
Modify/Delete
Programme Guide
P
Page Change
Exit
►
BLUE or

EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
40
Button Function in Schedule List Mode
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed
image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
1
2
Select Aspect Ratio.
• You can also adjust Aspect Ratio in the
PICTURE menu.
• For Zoom Setting, select 14:9, Zoom and
Select the desired picture format.
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
Just Scan
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes
back to Q.Menu.
• Full Wide
When TV receives the wide screen signal,it will lead
you to adjust the picture horizontally or vertically, in
a linear proportion,to fill the entire screen fully.
Full Wide
41
PICTURE CONTROL
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ratio, black bars will appear
on both the left and right of the screen.
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is moved to the
up and down.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom
of the picture will be cropped.
• Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture,
the image may become distorted.
PICTURE CONTROL
◄ or ► button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1~16.
▼ or ▲ button: Move the screen.
NOTE
► You can only select 4:3, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in Component mode.
► You can only select 4:3, Original, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in HDMI mode.
► In DTV/HDMI/Component (over 720p) mode, Just Scan is available.
► You can only select 4:3 , 16:9 (Wide) in RGB-PC, HDMI-PC mode only.
42
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can
calibrate the screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an
example.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not
applied.
PICTURE
● Aspect
Ratio
Move
With Picture Wizard, you can adjust the picture quality of the original
image.
: 16:9
3
4
Mode
: Vivid
• Backlight
100
• Contrast
95
• Brightness
50
• Sh
Sharpn
arpness
arpn
ess
70
0
Prev.
Next
• If you stop the setting before the final stage,
the changes will not be applied
Select PICTURE.
• The adjustment value is saved to Expert1.
• Once the Picture Wizard sets the image
Select Picture Wizard.
quality, the Energy Saving is changed into
Off.
Adjust Brightness, Contrast, Tint,
Colour, Horizontal Sharpness, Vertical
Sharpness, Backlight.
PICTURE CONTROL
2
►
Energy Saving : Off
● Picture
1
►
● Picture Wizard
●
Picture Wizard
OK
Select input source to apply the settings.
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
43
PICTURE CONTROL
ENERGY SAVING
It reduces the TV’s power consumption.
The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting
the Picture Mode.
When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is
finished.
Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
Ratio
● Picture
Wizard
: Off
● Aspect
Ratio
● Picture
Wizard
●
●
: Standard
Move
: 16:9
Energy
Saving: Off
Energy
Saving
● Picture
Mode
OK
: Off
: Standard
• Backlight
70
• Backlight
70
• Contrast
100
• Contrast
100
• Brightness
50
• Brightness
50
• Sh
Sharpn
arpn
p ess
70
• Sh
Sharpn
arpn
p ess
70
Off
Off
►
3
Mode
►
PICTURE CONTROL
2
: 16:9
Energy
Saving: Off
Energy
Saving
● Picture
PICTURE
OK
►
● Aspect
●
●
1
Move
►
PICTURE
Minimum
Medium
Maximum
Screen Off
Select PICTURE.
Select
Energy Saving.
Select Off, Minimum , Medium, Maximum or Screen
Off.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start. If you
do not press any button for 2 hours, the power of the TV will automatically be turned off.
• If you adjust “Energy Saving- Minimum, Medium, Maximum”, Backlight feature will not work.
• You can also adjust this feature by selecting Energy Saving button on the remote control.
44
PiCture Control
PreSet PiCture SettingS
Picture mode-Preset
Vivid
Standard
Cinema
Sport
game
Strengthen the contrast, brightness, colour and sharpness for vivid picture.
The most general screen display status.
Optimizes video for watching movies.
Optimizes video for watching sports events.
Optimizes video for playing games.
Move
Ratio
● Picture
Wizard
●
Energy Saving
: Off
● Aspect
Ratio
● Picture
Wizard
●
Standard
::Standard
Energy Saving
●●Picture
Mode
Picture
Mode
►
●●Picture
Mode
Picture
Mode
: 16:9
►
● Aspect
PICTURE
OK
Move
: 16:9
: Off
Vivid
Standard
::Standard
70
• Backlight
70
• Contrast
100
• Contrast
100
50
• Sharpness
70
• Brightness
50
Standard
Standard
►
• Backlight
• Brightness
OK
►
PICTURE
Cinema
Sport
Game
Expert1
Expert2
2
3
Select PiCture.
Select Picture mode.
,
Select Vivid, Standard, Cinema, Sport or Game.
PICTURE CONTROL
1
• Press the menu/exit button to return to normal TV viewing.
• Press the BaCK button to move to the previous menu screen.
• Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the
Picture Mode menu based on the programme category.
• You can also adjust Picture Mode in the Q. Menu.
45
PiCture Control
manual PiCture adjuStment
Picture mode-user option
Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright
part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
tint
Adjusts the balance between red and green levels.
Colour temp.
Adjust to left direction to make a picture reddish or adjust to right direction to make a picture bluish.
Move
Ratio
● Picture
Wizard
●
: 16:9
Energy Saving
: Off
● Aspect
Ratio
● Picture
Wizard
●
Standard
::Standard
Energy Saving
●●Picture
Mode
Picture
Mode
►
●●Picture
Mode
Picture
Mode
►
● Aspect
PICTURE
OK
Move
: 16:9
: Off
Vivid
Standard
::Standard
70
• Backlight
70
• Contrast
100
• Contrast
100
50
• Sharpness
70
• Brightness
50
Standard
Standard
Cinema
Sport
Game
Expert1
Expert2
1
Select PiCture.
2
Select Picture mode.
3
Select Vivid, Standard, Cinema,
Sport or game.
4
• Benefits of using Backlight
- The electricity consumption is reduced by
up to 60 %.
- The black brightness is reduced. (As the
black has greater depth, you can enjoy a
better quality definition.)
- You can adjust brightness with maintaining
original signal resolution.
Select Backlight, Contrast,
Brightness, Sharpness, Colour,
tint or Colour temp..
5
Make appropriate adjustments.
• Press the menu/exit button to return to normal TV viewing.
• Press the BaCK button to move to the previous menu screen.
note
46
►
PICTURE CONTROL
• Backlight
• Brightness
OK
►
PICTURE
► You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
► When the expert 1/2 is selected, you can select Backlight, Contrast, Brightness, h Sharpness, V
Sharpness, Colour or tint.
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special
video screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the
“Picture Reset” function for each Picture Mode.
Image shown may differ from your TV.
Move
• Br
B
Briright
ighttness
ess
• Sharpness
70
• Colour
70
• Tint
PICTURE
OK
50
0
• Colour Temp. C50
Move
• Br
Bright
Bri
ight
h ness
OK
50
0
Dynamic
Contrast
◄ Off
• Sharpness
R
G
W
C
►
• Advanced
Advanced Control
Control
70
Dynamic
Colour
G
• Colour
70 R
Clear White
C
• Tint
0 W
Skin Color
• Colour Temp. C50
Noise Reduction
• Advanced
Advanced Control
Control
• Picture Reset Digital Noise Reduction
►
PICTURE
• Picture Reset
• Screen
• Screen
►
High
High
0
Auto
Medium
Gamma
Medium
Black Level
Auto
Eye Care
▼
low
Close
2
3
4
Select PICTURE.
Select Advanced Control.
Select your desired Source.:
Dynamic Contrast, Dynamic Colour,Clear White, Skin Colour,Noise Reduction,
Digital Noise Reduction, Gamma, Black Level, Eye Care, Real Cinema, Colour Gamut
or xvYCC.
PICTURE CONTROL
1
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
47
PICTURE CONTROL
EXPERT PICTURE CONTROL
By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they
see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
Image shown may differ from your TV.
PICTURE
Ratio
● Picture
Wizard
PICTURE
OK
: 16:9
◄
• V Sharpness 60 R
Black Level
• Colour
60
Real Cinema
• Tint
0
Color Gamut
Advanced
Control
•• Expert
Control
Edge Enhancer
• Picture Reset
Standard
Cinema
70
Sport
• Contrast
90
Game
• Brightness
50
Expert1
►
• Backlight
• H Shar
Sharpnes
pnesss Expert2
pnes
70
• Screen
Off
►
Off
• H Sharpness
Digital70
Noise Reduction
Vivid
Energy Saving : Off
Expert1
●●Picture
Picture Mode
Mode
::Standard
●
MoveContrast
OK
Dynamic
• Br
Bri
Bright
ightnessNoise 50
Reduction
►
● Aspect
Move
Off
G
Auto
On
Wide
High
xvYCC
Auto
Expert Pattern
Off
▼
Close
PICTURE CONTROL
1
2
3
4
5
6
Select PICTURE.
Select Picture Mode.
Select Expert1 or Expert2.
Select Expert Control.
Select your desired Source.
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
48
picture control
*This feature is not available for all models.
Dynamic Contrast
(Off/Low/Medium/High)
Dynamic Colour
(Off/Low/High )
■■ Adjusts the contrast to keep it at the best level according to the brightness of
the screen. The picture is improved by making bright parts brighter and dark
parts darker.
■■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and
white look more vivid.
Skin Colour
■■ Expresses natural skin by detecting skin area of the video.
(-5 to 5)
Noise Reduction
(Off/Low/Medium/High/ ■■ Reduces screen noise without compromising video quality.
Auto(In Analogue Mode
Only))
Digital Noise Reduction
■■ Removes noise regarding MPEG compressed video.
(Low/Medium/High/Off)
Black Level
(Low/High/Auto)
Clear White
(Off/Low/High)
Eye Care
(Low/High/Off)
Real Cinema
(On/Off)
■■ You can adjust brightness of dark area and middle gray level area of the picture.
• Low/1.9 : Make dark and middle gray level area of the picture brighter.
• Medium/2.2 : Express original picture levels.
• High/2.4: Make dark and middle gray level area of the picture darker.
• Low : The picture of the screen gets darker.
• High : The picture of the screen gets brighter.
• Auto : Realizing the black level of the screen and set it to High or Low auto-
matically.
■■ Set black level of the screen to proper level.
■■ This function enables to select 'Low' or 'High' in the following mode:
AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
■■ Make brighter and clear the white area of screen.
PICTURE CONTROL
Gamma
(Advanced Control:
Low/Medium/High
Expert Control:
1.9/2.2/2.4 )
*This feature is not available for all models.
■■ Adjust the brightness of the screen to prevent the screen from being too bright.
Dims extremely bright pictures.
■ This feature is disable in “Picture Mode-Vivid, Cinema, Expert1, Expert2”.
■ You can watch a cinema-like video by eliminating judder effect.
■ Use this function when you watch film-originated movie contents.
49
PICTURE CONTROL
Colour Gamut
(Advanced Control:
Wide/Standard)
Colour Gamut
(Expert Control: EBU/
SMPTE/BT709/Wide)
Edge Enhancer
(Off/Low/High)
PICTURE CONTROL
50
• Standard : Mode to reproduce original colour according to the standard of
input signal independent of the display characteristics.
• Wide: Mode to use and set the rich colour area of the display.
■ Maximize the utilization for colour area that can be expressed.
■ Displays color domain of signal in Expert Control.
■ Shows clearer and distinctive yet natural corners of the video.
■ This function is enabled in “Picture Mode- Expert.”
*This feature is not available for all models.
xvYCC
■ This is the function to express richer colour.
(Auto/off/on)
■ This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted through HDMI
Expert Pattern
■ This is the pattern necessary for expert adjustment.
(Off/Pattern1/Pattern2) ■ This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
■ This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
(Off/Red/Green/Blue)
This is the function to adjust the overall colour of the screen to the feeling you want.
a. • Method : 2 Points
• Pattern: Inner, Outer
• Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 ~ +50.
b. • Method : 10 point IRE
Colour Temperature
• Pattern: Inner / Outer
(Medium/Warm/Cool)
• IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue
according to each setting.
• Luminance: This function displays calculated luminance value for 2.2 gamma.
You can input luminance value you want at 100 IRE, than the target luminance
value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
• Red/Green/Blue: The adjustment range is -50 ~ +50.
■ As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colours but can be used to selectively
adjust the 6 colour areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for the general video.
Colour Management
■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
System
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment
range is -30 ~ +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment
range is -30 ~ +30.
■ This feature is disable in RGB-PC and HDMI (PC) mode.
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
• Br
Bri
Bright
ightness
PICTURE
OK
50
• Sharpness
70
• Colour
70
R
G
0
W
C
• Tint
3
4
►
• Advanced Control
Yes
No
• Screen
Select PICTURE.
PICTURE CONTROL
2
70
•• Picture
Picture Reset
Reset
►
1
• Sharpness
OK
• Colour Temp. C50
• Advanced Control
• Screen
50
• Colour? All picture
70 Rsetting willGbe reset.
C
• Tint
0 W
Continue?
• Colour Temp. C50
•• Picture
Picture Reset
Reset
Move
• Br
Bri
Bright
ightness
Select Picture Reset.
Select Yes or No.
Initialize the adjusted value.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
51
PICTURE CONTROL
POWER INDICATOR
It helps you adjust the brightness of moving LED when power is turned on.
Standby Light
Determines whether to set the indicator light on the front of the TV to On or Off in standby mode.
Power Light
Determines whether to set the indicator light on the front of the TV to On or Off when the power turns
on.
OPTION
Move
● Country/Area
: HongKong
● Country/Area
: HongKong
● Hard
):Off
● Hard
):Off
of Hearing(
4
Standby Light
►
● MHEG
Guide
● Factory Reset
: Off Power Light
:1
● Set
:1
: Home Use
• Mode Setting
● MHEG
Guide
● Factory Reset
: Off
● Set
ID
of Hearing(
● Power Indicator
►
PICTURE CONTROL
3
OK
● Language(Language)
• Mode Setting
2
Move
● Language(Language)
● Power
Power Indicator
Indicator
●
1
OPTION
OK
ID
: Home
Use
◄
On
►
On
Close
Select OPTION.
Select Power Indicator.
Select Standby Light or Power Light.
Select your desired Source.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
52
PICTURE CONTROL
MHEG GUIDE
This menu determines whether to show the UI guide or the guide provided by MHEG when a user hits the
'GUIDE' key.
If you set the 'MHEG Guide' menu to On, the 'Digital Teletext' sent by broadcasters will be used. Note that
'Digital Teletext' is not always present.
Move
OPTION
OK
Move
OK
● Language(Language)
● Language(Language)
● Country/Area
: HongKong
● Country/Area
: HongKong
● Hard
):Off
● Hard
):Off
of Hearing(
Indicator
:1
● Set
ID
: Home Use
• Mode Setting
Select OPTION.
Off
Off
On
:1
: Home Use
Select O n or O f f.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
PICTURE CONTROL
Select MHEG Guide.
Off
►
• Mode Setting
Indicator
● MHEG Guide :
● Factory Reset
►
ID
►
● Set
● Power
Off
►
● Power
● MHEG Guide :
● Factory Reset
of Hearing(
►
OPTION
53
PICTURE CONTROL
MODE SETTING
We recommend setting the TV to “Home Use ” mode for the best picture in your home environment.
“Store Demo ” mode is an optimal setting for displaying at stores.
OPTION
Move
OPTION
OK
Move
OK
● Language(Language)
● Language(Language)
● Country/Area
: HongKong
● Country/Area
: HongKong
● Hard
):Off
● Hard
):Off
● Power
Indicator
● MHEG Guide
● Set
: Off
Reset
ID
Indicator
● MHEG
Guide
::Home
HomeUse
Use
● Set
: Off
Reset
ID
:1
Selecting the environment.
Choose the setting mode you want.
Select [Home Use] to use this TV at home. To use
this TV at store, select [Store Demo].
HomeUse
UseHome Use
::Home
Store Demo
● Demo
Off
►
Mode Setting
Setting
•● Mode
►
•● Mode
Mode Setting
Setting
● Power
● Factory
:1
►
● Factory
of Hearing(
►
of Hearing(
Mode
Close
PICTURE CONTROL
1
Select OPTION.
2
Select Mode Setting.
3
4
Select Store Demo or Home Use.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
54
PICTURE CONTROL
DEMO MODE
Display the slide show to explain the various logo of this TV.
It is not possible to use Demo Mode in Home Use mode.
In Store Demo, Demo Mode is automatically set to On.
Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is
reset.
The screen is reset automatically after 5 minutes in Demo Mode.
OPTION
Move
OPTION
OK
● Country/Area
: HongKong
● Hard
):Off
Indicator
● MHEG Guide
● Power
● Factory
: Off
):Off
of Hearing(
● Power
Indicator
● MHEG
Guide
: Off
Reset
ID
Home
::Home
Selecting the environment.
Choose the setting mode you want.
Select [Home Use] to use this TV at home. To use
this TV at store, select [Store Demo].
Home
● Demo
Use
Use Store Demo
Use
►
Mode Setting
Setting
•● Mode
:1
►
::Home
HomeUse
Use
: HongKong
● Hard
● Set
:1
•● Mode
Mode Setting
Setting
● Country/Area
● Factory
Reset
ID
►
● Set
OK
►
● Language(Language)
of Hearing(
Move
● Language(Language)
Mode
On
Close
2
3
4
5
PICTURE CONTROL
1
Select OPTION.
Select Mode Setting.
Select Store Demo.
Select On to show the various logo of TV.
Return to TV viewing.
If you want to stop the demo, press any button. (except
for MUTE,
+ , - button)
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
55
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
AVL automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time when the channel is changed. This feature allows users to enjoy stable volume levels by
making automatic adjustments for each program.
If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments.
AUDIO is disabled when connecting a headset.
AUDIO
Move
● Clear
Voice II
: Off
3
● Balance
● Sound
Mode
SOUND & LANGUAGE CONTROL
2
3
● Auto
L
: Standard
R
Move
Volume
● Clear
0
Voice II
: Off
Mode
OK
MHEG
Off
: Off
● Balance
● Sound
3
On
0
L
R
: Standard
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Re
Resett
1
AUDIO
OK
: Off
►
Volume
►
● Auto
• Re
Resett
Select AUDIO.
Select Auto Volume.
Select On or Off.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
56
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
Volume
Off
:: Off
● Balance
● Sound
Mode
● Auto
33
►
Clear Voice
Voice IIII
●●Clear
AUDIO
OK
: Off
►
● Auto
0
L
R
: Standard
• Infinite Sound : Off
• Treble
50
• Bass
50
• Re
Resett
1
3
Clear Voice
Voice IIII
●●Clear
: Off
Off
:: Off
● Sound
Mode
● Clear
Voice II
L
0 ● Level
R
33
● Balance
OK
◄
3
Off
-
5
+
: Standard
• Infinite Sound : Off
• Treble
50
• Bass
50
Close
• Re
Resett
• If you select “On” for Clear Voice II,
Infinite Sound feature will not work.
• Select levels from ‘-6’ to ’+6’.
Select Clear Voice II.
Select On or Off.
Adjustment for Clear Voice Level With selecting On
4
►
Select Level.
Make desired adjustment.
SOUND & LANGUAGE CONTROL
2
Select AUDIO.
Move
Volume
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
57
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can
also adjust the Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard
Music
Cinema
Sport
Game
Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Volume
● Clear
Voice II
Move
: Off
● Auto
3
Volume
● Clear
0
L
R
►
Standard
:: Standard
Voice II
Sound Mode
Mode
●●Sound
SOUND & LANGUAGE CONTROL
3
3
R
Music
• Infinite Sound : OffCinema
50 Sport
50
• Treble
• Bass
50
• Bass
Select AUDIO.
OK
L
Standard
0 Standard
Standard
:: Standard
• Treble
• Re
Resett
2
: Off
● Balance
• Infinite Sound : Off
1
Move
: Off
►
● Balance
Sound Mode
Mode
●●Sound
AUDIO
OK
: Off
►
● Auto
50 Game
• Re
Resett
• You can also adjust Sound Mode in the Q.
Menu.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or
Game.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
58
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT -USER MODE
AUDIO
Move
Volume
● Clear
Voice II
: Off
● Auto
3
0
L
R
Sound Mode
Mode
●●Sound
►
Standard(User)
:: Standard
3
4
5
OK
: Off
3
L
R
Standard(User)
0 Standard
Standard(User)
:: Standard
Music
• Treble
50
• Infinite Sound : OffCinema
• Treble
50 Sport
• Bass
50
• Bass
• Re
R sett
2
Voice II
Move
: Off
● Balance
• Infinite Sound : Off
1
Volume
● Clear
● Balance
Sound Mode
Mode
●●Sound
AUDIO
OK
: Off
►
● Auto
50 Game
• Re
R sett
Select AUDIO.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or
Game.
Select Treble or Bass.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
INFINITE SOUND
Select this option to sound realistic.
1
2
3
Select AUDIO.
Select Infinite Sound.
Select On or Off.
Infinite Sound : Infinite Sound is a patented
LG proprietary sound processing technology
that strives immersive 5.1 surround sound
impression with front two loudspeakers.
SOUND & LANGUAGE CONTROL
Set the desired sound level.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
59
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Volume
● Clear
Voice II
: Off
: Off
Mode
● Auto
3
0 0L
R
: Standard
● Sound
SOUND & LANGUAGE CONTROL
3
Mode
OK
: Off
: Off
3
0●0LBalance
: Standard
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Re
R sett
2
Voice II
●● Balance
• Infinite Sound : Off
1
Move
Volume
● Clear
►
●● Balance
● Sound
AUDIO
OK
►
● Auto
Move
R
0◄
L
R
Close
• Re
R sett
Select AUDIO.
Select Balance.
Make desired adjustment.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
60
►
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In AV, COMPONENT, RGB and HDMI1/2 with HDMI to DVI cable, the TV speaker can be operational
even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
● Soun
Sound
Sound
Move
M
Mo
Mod
de
de
AUDIO
OK
: Sta
St ndar
ndard
d d
● Soun
Sound
Sound
Move
M
Mo
Mod
de
de
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
DTV Audio Setting : Auto
1
● Digital Audio
►
: PCM
On
: :On
●●TV
TVSpeaker
Speaker
●
Out
: PCM
Off
: :On
On
On
PCM
DTV Audio Setting : Auto
►
●
Out
►
TVSpeaker
Speaker
●●TV
• Reset
►
● Digital Audio
OK
: Sta
St ndar
ndard
d d
►
AUDIO
Select AUDIO.
2
Select TV Speaker.
Select On or Off.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NOTE
SOUND & LANGUAGE CONTROL
3
► When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the
TV speaker.
► Some menus in AUDIO are disabled when TV Speaker is set to Off.
61
SOUND & LANGUAGE CONTROL
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
When different audio types exist in an input signal, this function allows you to select the audio type
you want.
● Soun
Sound
Sound
Move
M
Mo
Mod
de
de
AUDIO
OK
: St
Standar
ndard
d d
● Soun
Sound
Sound
Move
M
Mo
Mod
de
de
: St
Standar
ndard
d d
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
● Digital Audio
: On
● TV
►
Auto
: :Auto
►
Speaker
● DTV Audio Setting
: PCM
Out
Speaker
● DTV Audio Setting
: PCM
Auto
Auto
: On
HE-AAC
Auto
: :Auto
Dolby Digital+
►
● TV
Out
• Reset
►
● Digital Audio
OK
►
AUDIO
Dolby Digital
MPEG
1
2
SOUND & LANGUAGE CONTROL
62
3
Select AUDIO.
Select DTV Audio Setting.
Select Auto, HE-AAC, Dolby Digital +, Dolby
Digital or MPEG.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• Auto: Automatically outputs in the order HE-AAC > Dolby Digital+ > Dolby Digital > MPEG.
• HE-AAC, Dolby Digital +, Dolby Digital, MPEG: Allows users to select the audio type they want.
ex) If MPEG is selected, MPEG is always outputted.
If MPEG is not supported, another audio type is set in that order.
SOUND & LANGUAGE CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony
Philips Digital InterFace) output to Dolby Digital.
If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will
be PCM(Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby
Digital Audio, only Dolby Digital will be played.
Move
M
Mo
Mod
de
de
AUDIO
OK
: St
Standar
ndard
d d
● Soun
Sound
Sound
Move
M
Mo
Mod
de
de
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
1
3
: On
● TV
DTV Audio Setting : Auto
●
Out
Speaker
: On
Auto
PCM
PCM
DTV Audio Setting : Auto
Manufactured under license from
Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of
Dolby Laboratories.
Select AUDIO.
Select Digital Audio Out.
Select Auto or PCM.
PCM
: :PCM
• There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital audio of
the DVD player to PCM. (In HDMI, Dolby Digital
Plus is not supported).
Item
Audio Input
Digital Audio output
Auto(Speaker On)
MPEG
DD
DD+
HE-AAC
PCM
DD
DD
PCM
Auto(Speaker Off)
MPEG
DD
DD+
HE-AAC
PCM
DD
DD
DD
PCM
PCM
PCM
SOUND & LANGUAGE CONTROL
2
● Digital Audio
►
●
Speaker
PCM
: :PCM
►
● TV
Out
• Reset
►
• Reset
● Digital Audio
OK
: St
Standar
ndard
d d
►
● Soun
Sound
Sound
►
AUDIO
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
63
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
Move
M
Mo
Mod
de
de
● Soun
Sound
Sound
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
1
SOUND & LANGUAGE CONTROL
2
3
Out
• Reset
: PCM
● Digital Audio
: On
● TV
DTV Audio Setting : Auto
●
Speaker
Out
: PCM
: On
DTV Audio Setting : Auto
►
●
Speaker
OK
: St
Standar
ndard
d d
►
● TV
Move
M
Mo
Mod
de
de
• Infinite Sound : Off
• Reset
● Digital Audio
AUDIO
OK
: St
Standar
ndard
d d
►
● Soun
Sound
Sound
►
AUDIO
All audio settings will be resetted.
Continue?
Yes
No
Select AUDIO.
Select Reset.
Initialize the adjusted value.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
64
SOUND & LANGUAGE CONTROL
STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme
number and station name.
1
Select Audio.
2
Select the sound output.
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
■ Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the
clarity of sound is improved.
DUAL I
DUAL II
DUAL I+II
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
SOUND & LANGUAGE CONTROL
■ Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I,
DUAL II or DUAL I+II.
65
SOUND & LANGUAGE CONTROL
NICAM RECEPTION (IN ANALOGUE MODE ONLY)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
SOUND & LANGUAGE CONTROL
66
When NICAM mono is received, you can select NICAM MONO or FM MONO.
2
When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or FM MONO.
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left and
right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from
audio R input is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE/COUNTRY/AREA SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
1
Select your country.
* If you want to change Language/Area or Country selection
1
2
Select Language(Language).
3
4
Select Menu Language.
Select your desired language.
Select OPTION.
2
Select Country/Area.
3
4
Select your country.
Save.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NOTE
SOUND & LANGUAGE CONTROL
5
1
Select OPTION.
► If you do not finish the set-up Installation Guide by pressing BACK or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever the
TV is switched on.
► DTV mode control buttons may not function based on country broadcasting circumstances.
► In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending on
digital broadcasting circumstances.
67
SOUND & LANGUAGE CONTROL
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a
selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not
supported, you can select language in secondary category.
1
2
Select Language(Language).
3
4
5
SOUND & LANGUAGE CONTROL
68
1
Select OPTION.
Select Menu Language, Audio
Language or Subtitle Language.
2
3
Select OPTION.
Select Hard of Hearing(
.)
Select On or Off.
Select your desired language.
Save.
• Press the BACK button to move to the previous menu screen.
SOUND & LANGUAGE CONTROL
Audio Language OSD Information
< Audio Language Selection >
► When two or more audio languages are broadcast, you can
select the audio language.
Display
N.A
Status
Not Available
MPEG Audio
l
Dolby Digital Audio
Audio for “Visual Impaired”
1
2
Audio for “Hearing Impaired”
Dolby Digital Plus Audio
Select Audio.
Select an audio language.
AAC Audio
3
< Subtitle Language Selection >
► When two or more subtitle languages are broadcast, you
can select the subtitle language with the SUBTITLE button
on the remote control.
► Press the
button to select a subtitle language.
Select L+R, L+L or R+R.
Subtitle Language OSD Information
Display
N.A
Status
Not Available
Subtitle for “Hard of Hearing”
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of
the Main audio.
SOUND & LANGUAGE CONTROL
69
TIME SETTING
CLOCK SETUP
The clock is set automatically after a digital signal is received.(You can set the clock manually only if
the TV has no DTV signal.)
You must set the time correctly before using on/off timer function.
TIME
Move
TIME
OK
Move
● Clock
►
● Clock
◄
OK
Auto
►
● Off
Time
: Off
● Off
Time
: Off
Year
2008
● On
Time
: Off
● On
Time
: Off
Month
Mar.
: Off
● Sleep
: Off
Date
8
Hour
16
Minute
09
● Sleep
Timer
Timer
Close
1
2
TIME SETTING
3
4
4
Select TIME.
Select Clock.
Select Auto or Manual.
Select either the year, month, date, hour or Minute.
Set the year, month, date, hour or Minute.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
70
TIME SETTING
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
TIME
Move
TIME
OK
● Clock
● Clock
: Off
● On Time
: Off
● Sleep
: Off
Timer
● Off
Time
● On Time
►
Time
►
● Off
Move
● Sleep
Timer
OK
Mar. 1, 2007 16:09
: Off
Repeat
◄
Off
: Off
Hour
00
: Off
Minute
00
Input
TV
Programme
TV1
Volume
►
30
Close
1
2
4
5
6
• For On Time function only
Select Off Time or On Time.
2
Select Repeat.
Select Off, Once, Daily, Mon. ~ Fri.,
Mon. ~ Sat., Sat. ~ Sun. or Sun..
Set the hour.
1
3
4
Select Input.
Select the input source.
Set the programme.
TIME SETTING
3
• To cancel On/Off Time function, select Off.
Select TIME.
Adjust volume level at switch-on.
Set the minute.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
71
TIME SETTING
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1
2
Select Sleep Timer.
Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min..
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust Sleep Timer in the TIME menu.
TIME SETTING
72
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
If a channel is locked, enter the password to unlock it temporarily.
LOCK
4
5
● Set
: :Off
Off
Move
● Lock System
Off
Off
: :Off
Off
● Block
Programme
● Block
Programme
● Input
Block
● Input
Block
: Off
● Key
Select LOCK.
OK
Password
Lock
On
: Off
• If you forget your password, press ‘0’, ‘3’,
‘2’, ‘5’ on the remote control handset.
Select Lock System.
Select On.
Set the password.
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password to confirm.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
PARENTAL CONTROL / RATINGS
3
Lock
LOCK
►
● Key
2
OK
►
● Lock System
1
Move
Password
►
● Set
73
PARENTAL CONTROL / RATINGS
BLOCK PROGRAMME
Blocks any programme that you do not want to watch or that you do not want your children to watch.
It is available to use this function when Lock System ”On”.
Enter a password to watch a blocked programme.
Programme Edit
RADIO
System
Lock
: On
● Block
Programme
● Input
Block
TV
Cable TV
OK
Password
● Lock
● Key
Move
1/2 page
A
DTV
LOCK
● Set
Favourite Group :
▲
▼
: Off
1 YLE TV1
2 YLE TV2
3 YLE FST
4 YLE24
5 YLE Teema
6 TV4 Stockholm
7 Kanal Lokal
8 CNN
9 TV4
10 TV4 Plus
14 TV400
15 TV4 Film
24 TV4 Fakta
25 MediaCorp HD5
36 SNY_SSU
84 Demo
85 TVE 1
86 TVE 2
87 24H TVE
88 CLAN/50 TVE
99 LA7
▼
Pr. Change
Navigation
P
Page Change
Previous
Block/Unblock
1
Select LOCK.
2
Select Lock System.
3
PARENTAL CONTROL / RATINGS
74
4
5
Select Block Programme.
Enter the Block Programme.
YELLOW
Select a programme to be locked.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
PARENTAL CONTROL / RATINGS
EXTERNAL INPUT BLOCKING
Enables you to block an input.
It is available to use this function when Lock System ”On”.
LOCK
● Set
LOCK
OK
● Set
Password
● Lock
● Key
Move
System
Lock
Password
● Lock
: On
● Block
Programme
● Input
Block
Move
System
● AV
: On
● Block
Progra
● Input Block
▲
▼
● Key
: Off
Lock
: Off
OK
◄
● Component
Off
● RGB
Off
● HDMI1
Off
● HDMI2
►
Off
▲
▼
Off
Close
1
Select LOCK.
2
Select Lock System.
3
Select Input Block.
Select input source.
5
6
Select On or Off.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
PARENTAL CONTROL / RATINGS
4
75
PARENTAL CONTROL / RATINGS
KEY LOCK
The TV can be set so that the remote control is required. This feature can be used to prevent unauthorized viewing.
LOCK
Move
OK
Password
● Lock
System
●● Key
Key Lock
Lock
LOCK
● Set
: Off
Move
● Lock
System
: Off
Programme
● Block
Programme
● Input
Block
● Input
Block
: Off
: Off
OK
Password
● Block
►
● Set
● Key Lock
: :Off
Off
Off
Off
On
1
Select LOCK.
2
Select Key Lock.
3
PARENTAL CONTROL / RATINGS
76
4
Select On or Off.
• In Key Lock ‘On’, if the TV is turned off, press the
INPUT, P
button on the TV or POWER
or NUMBER buttons on the remote
INPUT, P
control then the set will be turned on.
• With the Key Lock On, the display ‘
Key
Lock On ’ appears on the screen if any button on
the front panel is pressed while viewing the TV.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
,
DIGITAL TELETEXT
The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc.
This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.
You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
Image shown may differ from your TV.
But the actural situation is depending on the broadcasting signals of different area or different
broadcasting service.
TELETEXT WITHIN DIGITAL SERVICE
1
Press the numeric or P
button to select a digital service which broadcasts digital teletext.
To know which are digital teletext services, refer to the EPG service list.
2
Follow the indications on digital teletext and move onto the next step by pressing GUIDE, TEXT ,
OK,
,RED, GREEN,YELLOW ,BLUE or NUMBER buttons and etc..
3
To change digital teletext service, select a different service by the numeric or P
button.
DIGITAL TELETEXT
77
DIGITAL TELETEXT
TELETEXT IN DIGITAL SERVICE
1
Press the numeric or P
2
Press the GUIDE , TEXT or coloured button to switch on teletext.
3
Follow the indications on digital teletext and move onto the next step by pressing OK ,
RED , GREEN, YELLOW, BLUE or NUMBER buttons and so on.
4
Press the GUIDE ,TEXTor colour button to switch off digital teletext and return to TV viewing.
button to select a certain service which broadcasts digital teletext.
Some services may allow you to access text services by pressing the RED button.
DIGITAL TELETEXT
78
,
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
A
The remote control
does not work
Power is suddenly
turned off
A
A
A
A
A
Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Install new batteries.
Is the sleep timer set?
Check the power control settings. Has the Power supply been interrupted.
If the TV is switched on and there is no input signal, it will switch off automatically after 15 minutes.
The videofunction does not work.
A
A
No picture & No sound
A
A
A
Picture appears slowly
after switching on
A
A
No or poor colour
or poor picture
A
A
A
A
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
No picture
when connecting HDMI
A
A
A
A
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
Allow a sufficient distance between the TV and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
Check for sources of possible interference.
Check antenna (Change the position of the antenna).
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display
can result. Please use the latest cables that support at least HDMI version 1.3.
APPENDIX
Lines or streaks
in pictures
A
Check whether the TV is switched on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted correctly into the mains?
Check your antenna direction and/or location.
Test the mains outlet by plugging another TV into the same outlet.
79
APPENDIX
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
Unusual sound from
inside the TV
No sound when
connecting HDMI
A
A
A
+ or - button.
Press the
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
Adjust Balance in menu option.
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
Check HDMI cable over version 1.3.
There is a problem in PC mode.(Only PC mode applied)
The signal is out of range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is unstable
or single colour
A
Adjust resolution, horizontal frequency, or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust clock, phase, or H/V position. (Option)
A
A
Check the signal cable.
Reinstall the PC video card.
There is a problem with PICTURE settings.
APPENDIX
80
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
time.
A
It means that the TV is currently set to St ore Demo mode.
To switch to Home use mode you should do the followings:
From the TV Menu, choose O PTIO N -> Choose M ode Set t ing -> Choose
Home use. Now, you have completed switching to the Home use mode.
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent, Wring the cloth until it is almost dry, and then use it
to wipe the screen,
2
Ensure there is no excess water on the screen, Allow any water or dampness to evaporate before switching on,
Cleaning the Cabinet
A
A
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth,
Do not to use a wet cloth,
Extended Absence
CAUTION
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges,
APPENDIX
81
APPENDIX
PRODUCT SPECIFICATIO NS
Item
Dimensions
(Width x Height x
Depth)
Weight
MODELS
26LU3***
26LU30D-CB
with stand
668 x 538.3 x 236 mm
26.3x 21.2 x 9.3 inches
without stand
668 x 456 x 81mm
26.3 x 18 x 3.2 inches
with stand
without stand
8.75 kg //19.26 lbs
7.85 kg / 17.33 lbs
AC 100-240V~ 50/60Hz
Power requirement
DTMB, PAL D/K, PAL I, NTSC M
Television System
DTV: 1 ~ 57
Programme Coverage
PAL D/K: VHF/UHF 1~62, CATV 1~41
PAL I: VHF/UHF 1~69, CATV 1~47
NTSC M: VHF/UHF 2~83, CATV 1~71
External Antenna Impedance
Operating
Temperature
Environment condition
Operating Humidity
Storage Temperature
Storage Humidity
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
■ The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
82
APPENDIX
Open source software notice
The following GPL executables and LGPL/MPL libraries used in this product are subject to the
GPL2.0/LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
• Linux kernel 2.6
• busybox
• lzo
LGPL LIBRARIES:
• uClibc
MPL LIBRARIES:
• Nanox
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of media, shipping and handling upon e-mail request
to LG Electronics at:
opensource@lge.com
This offer is valid for a period of three(3) years from the date of the distribution of this product by
LG Electronics.
You can obtain a copy of the GPL, LGPL, MPL licenses from http://www.gnu.org/licenses/oldlicenses/gpl-2.0.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html, http://www.mozilla.org/
MPL/MPL-1.1.html.
Also you can obtain the translation of GPL, LGPL licenses from http://www.gnu.org/licenses/oldlicenses/gpl-2.0-translations.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.
html.
This software is based in part on the work of the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
This product includes
• libpng library : copyright © 2004 Glenn Randers-Pehrson
• Zlib compression library: Copyright © 1995-2002 Jean-loup Gailly and Mark Adler.
• Tinyxml library : copyright (c) 2000-2006 Lee Thomason
APPENDIX
83
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
Model :
Serial No. :
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising