LG V180, V1802SZ Owner's manual
DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : V180 PAL SECAM ENGLISH Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Safety Precautions SERIAL NUMBER: The serial number is found CAUTION on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK Model No. DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE ___________________________________ Serial No. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ___________________________________ of your old Disposal appliance 1. When this crossed-out wheeled bin symbol is product it means the product is by the European Directive 2002/96/EC. attached to covered This lightning flash with arrowhead symbol within equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of a 2. All electrical and electronic products should be separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. an of disposed electric shock to persons. 3. The correct The exclamation mark within an equilateral disposal of your old appliance will help prevent potential negative consequences trian- for the environment and human health. gle is intended to alert the user to the presence important operating and maintenance (servicing) instructions in the literature accompanying the product. 4. For detailed information about disposal of appliance, please contact your city office, waste disposal service or the shop where you purchased the product. of more your old WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION Most appliances circuit; Slots and appliance from The uct openings in the cabinet reliable heating. openings should operation are of the provided for ventilation product and to protect it over on a be bed, sofa, rug should not be placed never or in a be blocked by placing the prodproduct other similar surface. This built-in installation such rack unless proper ventilation is provided facturer's instruction have been adhered to. case or as a or book- the they be placed upon a dedicated That ensure the Power Cord recommend CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. and to concerning manu- is, a Check the single outlet circuit which powers only that no additional outlets or branch circuits. and has specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it,discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized or services. Protect the power cord from physical or mechanical abuse, being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets,and the point where the cord exits the appliance. such CAUTION: This To Digital Video Disc Player employs a Laser System. proper use of this product, please read this owner's manual carefully and retain for future reference, as ensure should the unit require maintenance, contact an authorized procedure. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazservice location-see service ardous radiation exposure. To prevent direct exposure to laser beam, do not try to CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. CAUTION: The such 2 as apparatus shall not be exposed to water, splashing and that no objects filled with liquids, vases, shall be placed on the apparatus. or is easily mains, pull out the mains product, ensure that the plug accessible. This product is manufactured to radio interference open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. dripping To disconnect power from the cord plug. When installing the TIVE requirements comply with the of EEC DIREC- 89/336/EEC, 93/68/EEC and 73/23/EEC. Table of Contents Introduction Operation SafetyPrecautions.........................2 Operationwithtape.....................19-23 Playingatape..........................19 .19 CM(CommercialMessage)Skip. OPR (Optimum Picture Response). 19 InstantTimerRecording...................20 Timer recording using On Screen Display 21-22 .23-25 AdditionalOperation-VCRpart. Hi-FiStereoSoundSystem................23 OnScreenDisplay(F.OSD)................23 TapeCounterMemoryStop................23 TableofContents..........................3 BeforeUse..............................4-5 AbouttheSymbolDisplay..............4 SymbolusedinthisManual...............4 NotesonDiscs.........................4 HandlingDiscs.........................4 StoringDiscs..........................4 CleaningDiscs.........................4 .4 SelectingtheViewingSource. TypesofPlayableDiscs...................5 RegionalCode..........................5 . . . . . . . . . . . . FrontPanel...............................6 RemoteControl............................7 RearPanel................................8 Preparation Connections............................9-10 9 Connecting to a TV & Decoder(or Satellite) .10 ConnectingtoOptionalEquipment. .11-14 BeforeOperation-VCRpart. .11 UsingyourVCRfortheveryfirsttime. SettingtheclockManually.................11 Tosetthecoloursystem..................11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tosetthedecoder.......................23 .24 VideoDoctor(Self-Diagnosis). .24 WideScreenCompatibility16:9. 1WMode(Powersavemode)..............24 25 Recording from External Components CopyingfromDVDtoVCR.................25 .26 GeneralPlaybackfeatures-DVDPart. PlayingaDVDorVideoCD..................27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Additionalfeatures.......................27 3DSurround........................27 TimeSearch........................27 . . .12 TuninginTVStationsAutomatically. .13 TuninginTVStationsManually. .14 ChangingtheorderofTVStations. DeletingTVStations.....................14 .15-18 BeforeOperation-DVDpart. Disc Information on-screen 15 Displaying InitialSettings..........................15 GeneralOperation.......................15 . . . . Howtousethemainmenu.................12 . . . . . . . MarkerSearch......................27 LastSceneMemory..................27 ScreenSave........................27 .28 PlayinganAudioCDorMP3/WMAfile ProgrammedPlayback....................28 .28 RepeatProgrammedTracks. .28 ErasingaTrackfromProgramList. .28 ErasingtheCompleteProgramList. ViewingaJPEGfile.......................29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SlideShow.............................29 . StillPicture............................29 MovingtoanotherFile....................29 LANGUAGE............................16 Zoom.................................29 MenuLanguage......................16 Torotatepicture.........................29 PlayingaDivXMoviefile...................30 PlayingaDVDVRformatDisc...............31 AdditionalOperation.......................32 32 Controlling other TVs with the remote control DiscAudio/Subtitle/Menu. . . . . . . . . . . . .16 DISPLAY..............................16 TVAspect..........................16 DisplayMode........................16 ProgressiveScan.....................16 TVOutputSelect.....................16 AUDIO................................17 . . . MaintenanceandService..................32 Reference .17 DolbyDigital/DTS/MPEG. SampleFreq.(Frequency)..............17 .17 DRC(DynamicRangeControl). LanguageandAreaCodeList...............33 LanguageCodeList......................33 Vocal..............................17 Troubleshooting..........................34 Specification.............................35 . . . . . . . . . . . . . . . . . . . LOCK(ParentalControl)..................17 Rating.............................17 Password(SecurityCode)..............17 AreaCode..........................18 OTHERS..............................18 PBC..............................18 AutoPlay..........................18 DivX(R)VOD........................18 AreaCodeList..........................33 Introducin Before Use To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Notes on This manual Handling Discs provides information on the operation and require maintenance of your DVD player. Should the unit service, contact an authorized service location. About the " Discs Do not touch the by the edges so playback side of the disc. Hold the disc fingerprints do not get on the sur- that face. Never stick paper or tape on the disc. Symbol Display " may appear on your TV and indicates that the function manual is not available on display during operation explained in this owner's that specific DVD video disc. Storing Discs playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. After Symbol Used in this Manual Note: Indicates special notes and operating features. Tip: Indicates tips and hints for A section whose title has applicable only ALL making the task easier. of the following symbols represented by the symbol. one to the disc is Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. All discs listed below DVD DVD and finalized DVD±R/RW VCD Video CDs ACD Audio CDs MP3 MP3 files Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static WMA WMA files spray intended for older DivX DivX files Selecting the You must select VCR) to view vinyl records. Viewing Source of your output the TV screen. one on sources (DVD or If you want to view DVD deck output source: Press DVD until DVD indicator in the display window lights TV and output source of DVD deck is viewed on the screen. If you want to view VCR deck output source: Press VCR until VCR indicator in the display window lights TV and output source of VCR deck is viewed on the screen. Notes: ? ? If you insert a disc while this unit is in the VCR this unit will switch to DVD mode automatically. If you insert a cassette tape without prevention tab while this unit is in the DVD mode, this unit will switch to VCR mode 4 mode, automatically. Before Use (Continued) Types of Playable Notes Discs on Copyrights: It is forbidden DVD cast via (8cm/12cmdisc) al without (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) this unit addition, plays DVD±R/RW, SVCD that contains audio law to copy, broadcast, show, broad- rent copyrighted materipermission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method Video CD In by cable, play in public, or claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and CD-R/RW and titles, DivX, MP3, WMA, and/or JPEG files. This indicates a product feature that is capable playing DVD-RW discs recorded with Video Recording format. of other Use of this rights copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. owners. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH Notes: ? ? DEFINITION TELEVISION SETS ARE FULLY COMPAT- Depending the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Do not use shaped or on irregularly shaped CDs (e.g., heartoctagonal) since they may result in mal- functions. ? This unit requires playback quality. recordings Pre-recorded DVDs set to these standards. There to meet cer- are are optimal automatically many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible playback. Customers should note that permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought This unit has a unit. This unit can the rear Notes ? or Regional owner. "ALL". Codes Most DVD discs have bers in it clearly a visible must match your unit's not play. ? copyright regional code printed on the rear of the play only DVD discs labelled same as of the unit on from the Code Regional FACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE globe on the with one or more num- cover. regional code This number or the disc can- If you try to play a DVD with a different regional code from your player, the message "Check Regional Code" appears on the TV screen. PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p discs and tain technical standards in order to achieve required IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI- DVD PLAYER, PLEASE CONTACT OUR CUS- TOMER SERVICE CENTER. Introducin Front Panel 1234 5 6 7891011121314 DVD 1. Disc 6. Tray Insert 2. a disc here. 7. (V/v) Channel Programme OFF. Tape Compartment VCR Tape Eject Selectors. 9. ./m Go to or closes the disc Press and hold for two seconds for search. Rewinds the Shows the current status of the unit. Starts [P]: A disc is loaded in the DVD deck. Indicates the Progressive Scan is set to On a : : repeat mode. Child Lock is recording : is recording chapter/track. timer programmed. is DVD/VCR Selector : Indicates total 14. Video IN Jack engaged. DVD to VHS copy is in progress. TV: Indicates TV mode. (See Notes on page playing time/elapsed time/current time. Stops playback. 13. DVD/VCR A Cassette is in the VCR deck. recording tape forwards. 12. x or a VCR: VCR deck is selected. REC: VCR reverse playback. search. Winds the engaged. DVD+VCR is in timer fast tape. Press and hold for two seconds for Indicates to 11. M/> Go to NEXT mode. : or 10. N DVD: DVD deck is selected. : beginning of current chapter/track chapter/track. PREVIOUS tray. window Display / Remote Sensor 8. DVD Opens 5. or PROG. 4. / Point the remote control here. 1/ I Switches the unit to ON 3. VCR 15 15. Audio IN 20.) (L/R) Jacks a fast forward Remote Control POWER Switch this unit ON or TV Control Buttons OFF. TVPOWER:Turns DVD/VCR select button Selects operational TV AV: Selects the TV's mode of TV VOL +/--: OPEN/CLOSE close the disc tray. a menu. Select VCR: Rewinds the mode, for fast To control vertical tremble into picture tape. ENTER/OK Access tape during the Access Select setup menu. the of menu a video CD an audio language (DVD). SUBTITLE Select subtitle a language. ANGLE Select DVD camera angle if available ZOOM Enlarge video REC/ITR image. (O) Record your LOCK input sources (Child Lock) Switch the Child Lock on into tape. and off. TITLE Display the title menu of the disc if available. menu. PROGRAM CLEAR Access the program menu or a mark on the MARKER SEARCH menu. Reset tape counter to zero. or remove menu. program A-B/LP Repeat sequence. Select the recording speed of the tape. REPEAT Repeat chapter, track, title, DVD disc. AUDIO SEARCH on or remove Displays point during playback. track number a with PBC. MARKER a of RETURN SKIP(./>) Go to next chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track. PAUSE/STEP (X) Pause playback temporarily / press repeatedly for frame-by-frame playback. PLAY ( N ) Starts playback. STOP(A) Stops playback. Clear menu SETUP/ i reverse MARKER SEARCH selection. menu DISC MENU forward. or during still. Acknowledge search. Display menu. recording picture search and Advances the tape during the STOP mode, fast forward picture Mark any item in the PR/TRK(+/-) (m/M) STOP an Select channel programme of VCR. To adjust tracking. BACKWARD / FORWARD DVD: Search backward or FGDE(left/right/up/down) AV for Introducin Display. counter. Switch between your TV's tuner and the VCR's internal tuner. source TV's volume. Shows you the current time TV/VCR input Adjusts Access the On-Screen 0-9 numerical buttons Select source. CLK/CNT Tape Eject. Select numbered items in 32) DISPLAY EJECT or p. offtheTV. TV PR +/--: Selects TV's channel. remote control. Open (see on or RANDOM/CM SKIP all. Play tracks in random order. CM SKIP Remote Control Remote control Operation Point the remote control at the remote sensor and press Detach the the buttons. AAA AAA Do not mix old and new batteries and different types of batteries such alkaline, etc. as never mix battery remote AAA) installation battery control, cover on the rear of the and insert two batteries with 3 and # (size aligned correctly.). standard, 7 Rear Panel AERIAL Connect the aerial using this jack. VIDEO/AUDIO Connect to a OUT(Left/Right) (DVD/VCR OUT) inputs. TV with video and audio COMPONENT/PROGRESSIVE SCAN VIDEO OUT (DVD EXCLUSIVE Connect to a TV with Y Pb Pr AUDIO OUT Connect to (Y Pb Pr) OUT) inputs. (Left/Right) (DVD EXCLUSIVE OUT) amplifier, receiver or stereo system. an EURO AV2 DECODER Connect to pay-TV decoder or another video recorder. AC Power Cord Connect to EURO AV1 AUDIO/VIDEO Connect to your TV set COAXIAL RF.OUT Do not touch the inner Electrostatic discharge pins may using this of the cause jack. jacks IN+OUT / DVD on the rear panel. permanent damage to the unit. power OUT) another video recorder. (Digital audio out jack) (DVD EXCLUSIVE OUT) digital (coaxial) audio equipment. Connect to Connect to your TV (VCR or a source. Connections Caution: Make DVD exclusive out connection sure this unit is connected Set the TV to the correct video directly to the input channel. Do not connect this unit's AUDIO OUT phone in jack (record deck) Connecting to (or Satellite) Make the one of the capabilities 1. to the TV & Decoder 2. the SCART lead input on the socket rear on the resolution to this unit a or decoder 1. (S2). (DVD/VCR OUT) jacks on the DVD Player to the corresponding in jacks on the TV using the video cable (V). Connect the Left and Right or AUDIO (DVD/VCR OUT) jacks of the DVD+VCR to the audio left/right in jacks on the TV using the audio cables (A1). "digital ready" possible. Connect the COMPONENT/ PROGRESSIVE SCAN sponding Connect the VIDEO 2. in jacks on the DVD Player jacks on the TV using the Connect the Left and MIERE) are signals (CANAL+ not decoded in the 1W Mode Basic connection or PRE- (see p. 24). (RF) Notes: Connect the RF.OUT Progressive to "On" on the setup progressive signal, see page 16. supplied jack on the scan (yellow VIDEO OUT AERIAL VIDEO INPUT COMPONENT VIDEO INPUT/ PROGRESSIVE SCAN Pb panel Input (R). COMPONENT VIDEO INPUT/ PROGRESSIVE SCAN Pr Pb SCART INPUT Y C VIDEO INPUT AUDIO INPUT A2 SCART INPUT AUDIO INPUT Y VA 1 Decoder (or Satellite) S1 S2 Rear of this unit (Basic connection) Rear of this unit (DVD exclusive out for analog jack). of this unit to your Rear of TV AERIAL menu RF antenna cable from the rear television's Antenna does not work with the Progressive connections Pr this unit. the the audio cables. Rear of TV Connect the RF antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of corre- Y Pb Pr cable. Right AUDIO OUT jacks of left/right in jacks on the TV this unit to the audio using to the Set the The encoded television R or VIDEO OUT Note: 2. high-definition If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. Some TV broadcasters transmit encoded television purchased a television, you may take advantage of the DVD Player's progressive scan output for the highest video or 1. Scan connection Progressive (S1). which you can only see with a rented decoder. You can connect such 2. jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable (C). Connect the Left and Right AUDIO OUT jacks of this unit to the audio left/right in jacks on the TV using the audio cables (A2). If your television is signals 1. Connect the COMPONENT/PROGRESSIVE SCAN on (AV) Connect the EURO AV1 AUDIO/VIDEO (descrambler) connection VIDEO OUT system. following connections, depending existing equipment. panel of this unit to TV using a SCART 2. of your audio Component Video of your Basic connection 1. a jack TV. connection) video Prepa tion Connections Connecting to (Continued) Optional Equipment Rear of this unit Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic Connect the Left and AUDIO OUT Right DVD/VCR AUDIO OUT or OUT) jacks on this to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables. (DVD EXCLUSIVE unit Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2 or DTS) 1. Connect one of this unit's DIGITAL AUDIO OUT to the (COAXIAL) amplifier. Use an in corresponding jack optional digital (coaxial) jack or DVD exclusive out DVD/VCR OUT on your audio cable. 2. You will need to activate this unit's "AUDIO" (See Digital on page digital output. 17). Multi-channel sound COA A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the supported by your unit (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. L IAL DIGITAL INPUT R AUDIO INPUT Amplifier (Receiver) audio formats Digital multi-channel connection (DVD exclusive out connecttion) Warning: Due to the DTS Licensing agreement, the digital output digital out when DTS audio stream is will be in DTS selected. Notes: If the audio format of the the capabilities of produce a strong, To see digital output does not match your receiver, the receiver will distorted sound or no sound at all. the audio format of the current DVD in the On-Screen Display, press AUDIO. Manufactured under license from "Dolby", Dolby Laboratories. Logic" and the double-D symbol are of Dolby Laboratories. "Pro trademarks DTS and DTS Theater 10 Digital Out Systems, Inc. are trademarks of Digital Rear of this unit Before Operation-VCR part Using your VCR for the very first time will Following picture display the TV on screen when you have just connected your video recorder for the very first time. To make as tuning TV follow stations, please (see p.12). shown "ACMS" stages 3 to 4 To set the colour system 1. Press i. 2. The main 3. Press 1 menu or will appear on the TV screen. 2 to select the SYS and press ENTER/OK. 4. Press 3 or 4 to select according to the COLOUR system used. AUTO: automatic colour selection, PA L : PA L A CH NN L recordings SECAM: SECAM recordings MESECAM: MESECAM recordings. DDKEFI PSS FOTHERS Pr-12 ACMS Setting the clock Manually fOS The clock in your DVD+VCR controls time and date settings for your DVD+VCR. The clock is set automatically during ACMS (Automatic Channel Memory System) when your DVD+VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually. 1. Press i. Press b to select SET. or B Press ENTER/OK. The ACSS mode can be set to "OFF" by pressing ENTER/OK if you want to set the time manually. HHMMDDMMYY :. - - -- -- -- --- . ACSS ON : SET 2. Use the v V on or the remote control to alter the HOURS, MINUTES, DAY, MONTH and YEAR. Please note your DVD+VCR uses a 24 hour clock. 1pm will be displayed as 13:00. e.g. The day of the week will appear automatically when you enter the year. HHMMDDMMYY 8 :. 00101 SUN . ACSS : OFF SET 3. If you make a mistake press b or B correct details. 4. Press i to return to a TV picture. and enter the ON OFF 5. Press i to remove the menus from the TV screen Prepa tion Before How to Operation-VCR part use This DVD+VCR menus The can displayed menus are the main be easily Tuning menu programmed by using the by If the TV broadcast signal Automatically is weak your DVD+VCR may not detect the necessary information and will not be able to store them correctly. To overcome this problem please on screen. controlled in TV Stations the Remote Control Handset. turn to the MANUAL TUNING section 1. Switch your TV set and DVD+VCR POWER button. 2. Press i button. on by pressing the 1. 2. The main menu will appear the TV on Press POWER to turn on page 13. on your DVD+VCR. Press i button. The main menu will appear on the TV Press 1 or 2 to select the ACMS. screen. screen. Press ENTER/OK. SET SYS fOSD A ON OFF Pr-12 CH NN L SET DDKEFI PSS FOTHERS Pr-12 fOSD Pr-12 ON OFF REC - Timer PR SET ACMS SET SYS - - - - recording setting (see Manual tuning setting (see ACMS Channel (Automatic System) (see p. 12). Date & clock setting (see To set the Colour TV 1 W ON/OFF (Dr.) p. - - p. F.OSD ON/OFF - problem a 3. 13). p. (see p. 4. with 1 Press ENTER/OK to start the automatic storing of area. 24). To display (see - area the channels of the TV stations in your with your VCR the operational mode of your VCR (16:9/4:3) to your "OTHERS" 11). 24). country according 2. A:Austria, B:Belgium, CH:Switzerland, D:Germany, DK:Denmark, E:Spain, F:France, I:Italy, N:Norway, NL:Netherlands, P:Portugal, S:Sweden, SF:Finland, 11). p. Select the or Memory System (see Power Save Mode To check (see p. ACMS 21). p. 01 C02 00 TVE 1 02 C03 00 BRTN 03 C04 00 RTBF1 23). To select the aspect ratio of your S TV (see p. 24). DECODER To use a pay-TV decoder (or Satellite) with your VCR (see p. 23). (OPR) To improve the playback picture (see p. 19). Appear when playback only. NIC To activate or deactivate the NICAM digital sound (see p. 23). E Pr-12 ACMS - - O 5. The TV STATION TABLE will appear when Press i to change the menu language on the DVD setup (See the Menu Language on page 16.) settings. 02 C03 00 BRTN 03 C04 00 RTBF1 04 C05 00 RTBF2 05 C06 00 RAI 1 06 C07 00 07 C08 00 RAI 3 08 C09 00 TVE P SET R can Press 1 and 2 to select the desired Press ENTER/OK and 4. your RAI 2 MOVE: menu. 3. save - Tip You tuning completed. Press i to return to a use 3 or TV picture. menu. 4 to select. DELETE: , Notes: The DVD+VCR's clock will be set automatic please automatically when tuning has finished. If the clock is wrong see "Setting the clock Manually" on page 11. is Before in TV Stations Tuning In certain Operation-VCR part areas of the 6. Manually country broadcast signals may ually 1. will stop when it locates a stations. Press 2 to select MFT. be too weak for your DVD+VCR's automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations Press ENTER/OK. Searching Control the fine tuning of the station by using 3 or 4. man- in order for your DVD+VCR to store them. Press i. The main menu will appear on the TV Press 1or2toselectthePRSET. PR CH 04 C04 STATION MFT screen. CHANNEL/CABLE : AV P SET R Press ENTER/OK. 7. PR CH MFT STATION 00 PR-03 01 SET 8. SYS fOSD CHANNEL/CABLE ON OFF : that you may so name your TV station. Press ENTER/OK. Pr-12 ACMS Press 2 to select STATION AV P SET R Use 3 or station name. Use 1 or 4 to select letters and numbers for the 2 to move back and forth between characters. 2. Press i. Press ENTER/OK. The station table will appear. 3. Press 3 or 4 to select the programme number that you want to tune 01 C01 00 PR-01 02 C02 00 PR-02 03 C03 00 PR-03 05 06 07 08 -- -- ----- -- -- ----- -- -- -- -- P SET R 4. PR (for example, 04). 9. ----- : DELETE : Press MFT 00 STATION i, confirm the station placement. , Press ENTER/OK. Press AV to select C CH C04 P SET R ----- MOVE PR 04 (Standard stations) or S (Cable PR CH MFT 04 C04 00 STATION stations): C02 - C69, S01 - S41. P SET R Enter the channel number of station that you want to tune, use 3 or 4 to find the required station. If you wish to 3 9. stages PR CH 04 MFT STATION -- ---- manually 01 C01 00 PR-01 02 C02 00 PR-02 03 C03 00 PR-03 05 06 CHANNEL/CABLE : tune other stations 07 AV 08 P SET R -- -- ----- -- -- ----- -- -- ----- -- -- P SET R 5. Press ENTER/OK and select the "PAL" by pressing or Your PR CH MFT C04 00 P SET R STATION : : , again. new TV station has DVD+VCR. 04 ----- MOVE DELETE "SECAM" 10. Press i 3 or 4. repeat - now been tuned into your Prepa tion Before Operation-VCR part the order of TV Stations Changing tuning TV stations into your DVD+VCR you may change the order in which they are stored without having to retune them again. The instructions given on this page will show you how you can simply move Deleting TV Stations After After wish to wish to delete tuning TV stations into your DVD+VCR you may a station. The instructions you easily can given on this page will show you how delete any unwanted TV stations. them into your desired order. 1. 1. Press i. The main Press 1 will appear on the TV 2 to select the PR SET. menu or Press i. The main menu will appear on the TV Use1or2toselectthePRSET. screen. Press ENTER/OK. Press ENTER/OK. PR PR CH 01 MFT STATION 00 PR-03 SET ACMS CH 01 SET : PR-03 CHANNEL/CABLE ON OFF CHANNEL/CABLE STATION 00 SYS fOSD SYS ON OFF MFT Pr-12 ACMS Pr-12 fOSD screen. : AV P SET R AV P SET R 2. 2. Press i. Press i. Press 3 want to or 4 to select the programme number you 3. Press 3 or 4 to select the programme number you want to delete. (for example, PR-03). move (for example, PR-01) Press 2. 02 C02 00 PR-02 01 C01 00 PR-01 01 C01 00 PR-01 03 C04 00 PR-04 02 C02 00 PR-02 02 C02 00 PR-02 04 05 03 04 05 06 07 08 C04 00 04 PR-04 -- -- ----- 05 -- -- ----- 06 -- -- ----- 07 -- -- ----- 08 P SET R MOVE : DELETE : C04 00 -- ----- -- -- ----- -- -- ----- -- -- ----- 07 08 Press 3 01 C01 00 PR-01 02 C02 00 PR-02 03 C04 00 PR-04 -- -- ----- -- -- ----- -- -- ----- a short -- -- 05 07 P SET R 08 other TV stations move 01 C01 00 PR-01 02 C02 00 PR-02 03 C04 00 PR-04 -- -- ----- -- -- ----- -- -- ----- -- -- P SET R remove C02 -- C03 : : , the 00 repeat stages PR-04 -- ----- 00 PR-03 -- -- ----- -- -- ----- -- -- -- -- P SET R Press ENTER/OK. The selected programme will be moved to the programme number. Press i to ----- MOVE DELETE ----- 06 5. -- If you wish to delete other TV stations 04 08 08 ----- -- 3-4. 03 07 07 -- while, the selected station will be 02 06 06 ----- -- deleted. 05 04 -- Press 1. After 4 to select the programme number you want to move to (for example, PR-05). or If you wish to 1-4. PR-03 -- P SET R , 04 4. ----- 00 P SET R 4. 3. -- C03 06 PR-04 -- -- new repeat stages ----- MOVE : DELETE : menus , from the TV screen. 5. Press i to remove the ----- ----- MOVE : DELETE : menus , from the TV screen. Before Operation-DVD part Disc Information Displaying Initial on-screen You can loaded 1. display By using the DVD Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup various information about the disc on-screen. Press DISPLAY to show various Settings playback menu item, see pages 15 to 18. information. The items type displayed differ depending playing status. or on To the disc display and exit the Menu: Press SETUP to display the A second press of menu. SETUP will take you back to initial screen. To go to the next level: Press B on the remote control. 1/3 1/12 To go back to the previous level: Press b on the remote control. 0:20:09 General 1 ENG AB C 1. 1/1 Operation Press DVD on 3D SUR the remote control. LANGUAGE Menu 2. You select can change Title an item select the or (Track) -- by pressing v / V and setting by pressing b / B. Current title (or track) English Language Disc Audio Original Disc Subtitle Off Disc Menu Original number/total number of titles (or tracks) Chapter Current chapter number/total number chapters Time Elapsed playing time Audio Selected audio language or channel -- of -- Move 2. Subtitle Angle Sound -- -- -- Selected subtitle Selected 3. angle/total number of Press SETUP. The -- angles Setup move The If no button is pressed display disappears. for a few seconds, the on-screen 4. shows the current item, option then press B as well as setting for the setting(s). alternate Use v / V to select the second desired press B to 5. appears. to the second level. screen selected Note: menu Use v / V to select the desired to Selected sound mode Select move option then to the third level. Use v / V to select the desired setting then press ENTER/OK to confirm your selection. Some items require additional steps. 6. Press SETUP or N exit the Setup menu. 15 Prepa tion Before Operation-DVD part LANGUAGE Progressive Progressive provides the highest quality picflickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. LANGUAGE Menu Scan Scan Video tures with less English Language Disc Audio Original Disc Subtitle Off Disc Menu Original To turn On progressive scan: Connect Move Language Select a Component Input. Menu language for the information display. and component out of this unit to the input of your monitor/television, set your television or monitor to Select VCR and DVD's setup menu 1. Select "Progressive Scan" on the DISPLAY menu then press B. DISPLAY Disc Audio / Subtitle / Menu Select the TV DVD language you prefer (disc audio), subtitles, and the disc Refers to the disc recorded. was Mode Progressive for the audio track Original: Aspect Display TV Output Scan On Off Select menu. original language in which the Prev. Other:To select another press number buttons then ENTER/OK to enter the corresponding language, according to the language code list in the reference chapter (see page 33). If you enter the wrong language code, press CLEAR. 4-digit 2. Select "On" 3. Pressing number scan using Move Enter the v / V buttons. ENTER/OK will set this unit to Progressive mode. Caution: Once the setting for progressive scan output is entered, image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to an DISPLAY On in error, you must reset the unit. DISPLAY TV Aspect Display Progressive TV Output Scan Select Remove any disc from the unit and close the disc on the display 1) 16:9 Mode tray. See that "DISC" is displayed Widescreen window. Off RGB Press STOP 2) on the remote control and hold it for five seconds before Move releasing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or Select monitor. TV Aspect 4:3 : 16:9 DVD TV Select when : a Select when Display Display Mode standard 4:3 TV is connected. a Output Set this unit TV TV connection 16:9 wide TV is connected. setting works Output only when the TV Aspect mode is set to "4:3". on upper and Panscan: entire 16 Displays a wide picture with lower portions of the screen. bands on Automatically displays the wide picture and cuts off the portions that do not screen options according to the this unit. RGB: When your TV is connected with the SCART (RGB signal) jack. Letterbox: Select type. YPbPr: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN VIDEO OUT DVD jacks Mode Select the on fit. the Before Operation-DVD part LOCK AUDIO Each DVD disc has variety of audio output options. options according to the type of a Set this unit's AUDIO audio system you (Parental Control) LOCK use. Rating Unlock Password New Area Code BE AUDIO Dolby Digital Bitstream DTS Bitstream MPEG PCM Sample Freq. 48KHz DRC On Vocal On Move Prepa tion Select Rating Move Blocks Select playback Not all discs Dolby Digital DVD / DTS / MPEG DivX 1. Select Bitstream: Select "Bitstream" if you connect the DVD+VCR's DIGITAL AUDIO OUT jack to an amplifiother er or equipment with a Dolby Digital, DTS Off not 3. Select is NOT or select 48 kHz. When this choice is capable of handling made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, type of signal through without any Check the documentation for your amplifier to verify its You thanks to digital audio technology. However, dynamic range of the you may wish to compress the audio output (the difference between the loudest sounds quietest ones). This allows you to listen to a losing clarity of sound. lower volume without a rating from 1 to 8 can enter or Set DRC to On for this effect. 2. Follow step 2 (1) the v / V buttons. has the most restrictions is the least restrictive. selection, the LOCK shown above menu then press B. (Rating). change the password, press ENTER/OK when the "Change" option is highlighted. Input a password and press ENTER/OK. Enter it again and press ENTER/OK to verify. 3. Press SETUP to exit the If you menu. forget your password If you forget your password, following steps: 1. Press SETUP to 2. Input the 6-digit display you the can clear it Setup using the menu. number "210499" and press password is cleared. DVD Set to On playing. on as ENTER/OK. The Vocal one using change password. 1. Select Password DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation movie at a Password With the DVD and the then press B. To (Dynamic Range Control) possible, menu 4. Press ENTER/OK to confirm your rating then press SETUP to exit the menu. capabilities. DRC the LOCK Unlock: If you select unlock, parental control is not active and the disc plays in full. If your receiver this unit passes each further processing. on and DVD 96 kHz amplifier "Rating" Rating 1-8: Rating rating eight (8) (for DTS): If you select "Off ", the DTS signal is output through the DIGITAL AUDIO OUT jack. signals, their content. Input a password and press ENTER/OK. Enter it again and press ENTER/OK to verify. If you make a mistake before pressing ENTER/OK, press CLEAR. / Sample Freq. (Frequency) on rated. access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. or MPEG): Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to two-channel PCM audio. (for Dolby Digital of rated DVDs based 2. To MPEG decoder. PCM are only when a multi-channel karaoke DVD is The karaoke channels on the disc mix into nor- mal stereo sound. 17 Before Operation DVD - DivX(R) DVD Area Code Enter the Area Code whose standards rate the DVD video reference based disc, chapter (see Select "Area Code" 1. part used to We provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos 33). page the LOCK on were the list in the on menu then press B. Follow 3. Select the first character 4. Press B and select the second character 2 step as shown left (Rating). using using the DivX VOD service. For more informa- tion, visit www.divx.com/vod. 1. 2. VOD 2. Select "DivX(R) VOD" option then press B. Press ENTER/OK while "Select" is selected and the registration code will appear. Use the registration code to purchase v / V buttons. using videos from DivX v / V buttons. or rent the VOD service at www.divx.com/vod. Follow the instructions and Press ENTER/OK to confirm your selection. 5. area code download the video onto 3. OTHERS Play and Divx(R) settings can be changed. played PBC On . Auto Off Play DivX(R) VOD Select Select Move VCD Playback Control (PBC) On: Video CDs with PBC to On or Off. are played according are played to the PBC. Off: Video CDs with PBC the same way as Audio CDs. Auto You cally set up the DVD+VCR starts If Auto DVD Play can Play playing so a DVD disc automati- whenever the DVD is inserted. mode is set to On, this DVD player will search for title that has the then play back the title longest playback automatically. time and Note: The Auto 18 playback on this Press ENTER/OK to exit. All the downloaded videos from DivX OTHERS Set disc for Note: The PBC and Auto PBC a unit. Play function may not work for some DVDs. back on this unit. VOD can only be with Operation Playing You will 5. tape a only tape be able to load and eject video cassettes when your DVD+VCR is plugged into the mains. Your DVD+VCR may also playback recordings from NTSC When To tapes (on PAL TV). Getting better a appear If distortions 6. on your TV. Press POWER to turn on your DVD+VCR. Insert the video cassette into your DVD+VCR. The video cassette should have the window side up and the Press N to start a arrow facing away from you. your tape. video cassette which has had its record protection tab removed, playback automatically. of the cassette will 3. automatically adjust picture quality. Press PAUSE/STEP by the picture. repeatedly to advance the tape frame. can be paused for up to 5 minutes. After 5 minutes your DVD+VCR will stop the tape to prevent damaging the tape or your DVD+VCR . picture quality playback. (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume While playback. tape is playing press CM SKIP control to commercial skip (or on the remote another programme material). press CM SKIP to skip: can be improved slightly by using 5 Press 150 seconds 6 Press 180 seconds OPR (Optimum Press N to continue playing your tape. Double speed playback Press the "N" button during normal playback. The tape will play back at double speed Response) automatically improves playback picture quality by adjusting your DVD+VCR to the condition the tape. Please appear in play note that the OPR icon that mode when 1. Press i. 2. Press b 3. Press ENTER/OK. 4. and without sound. Press the "N" button to return to Picture This feature vorV. normal reduce them 4 Press 120 seconds a Tapes 4. picture, 3 Press 90 seconds If you press FORWARD, the picture will be slowed down at about 1/19 times the normal playback. Still in the seen 2 Press 60 seconds the best Press PAUSE/STEP to still frame be 1 Press 30 seconds Your DVD+VCR will give CM Repeatedly AUTO TRACKING tracking can Press STOP to end normal playing start to to the status of If the end of the tape is reached, your DVD+VCR will stop playback automatically, rewind, stop, eject the tape. sure If you load shuttle, the noise bars may picture according Press EJECT. Tu rn 2. the on withvorV. that you have correctly connected your DVD+VCR as described earlier in this book. facing shuttle, press the tape. been removed. Make off the slow motion and slow motion and During picture playback started, the automatic tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press 3 or 4 on the remote control to manually adjust the tracking until any distortions have 1. s witch desired function. cassette is inserted and a playback, Shuttle : During playing back or still picture press F or G. You can reach the following playback speeds. (REV, PB 5-, PB 1-, Still, SLW, PLAY, 2PLY, CUE) Slow motion Press 3 or B to select or 4 playing playback at playing 5. a ( ) will only tape. (OPR). repeatedly to select: SHARP. Please note you may speed a of OFF, SOFT only or set OPR when tape. Press i return to screen. Picture search: back press either BACKWARD or FORWARD to this will enable you to rapidly wind the tape see where you are on the tape. During playing Logic search: During fast forwarding or rewinding press and hold m or M the picture will be played back at 7 times normal playback speed. Pr-12 P SET R ACMS OFF SOFT SHARP fOSD ON OFF 19 Operation Operation with Instant Timer tape 7. Recording (ITR) Your DVD+VCR allows you to make of simple methods: recordings using ately for runs out. set a incorporates Long Play (LP) using Standard LP you Play (SP); using will be able to record up to 360 minutes. Please note there will be a slight loss in picture and sound quality when 1. Make sure Insert on video cassette with a protection facing up and the Press 3 or 4 arrow facing tab into your away from you. to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote control. If you wish to record directly from the SCART or RCA jacks, repeatedly press AV until the socket you wish to record from is AV 1 for the recording displayed. from EURO AV1 SCART jacks on of your unit. AV 2 for recording from EURO AV2 DECODER rear jacks the of your unit. recording from VIDEO IN and AUDIO IN on AV 3 for (Left 5. & rear Right) jacks on the front of your unit. Press LP if you wish to record in Long Play or Play. SP will produce improved picture and sound quality, however LP will provide twice as much recording Standard time 6. as SP. Press REC/ITR Press REC/ITR on on the remote to start recording. the remote several times. Each successive press will increase the record time 30 minutes until you reach a maximum of 9 by hours. on a tape (this can hapby accident!) remove the protection edge of the video cassette. possible to record on a video cassette protection tab removed by covering with self adhesive your DVD+VCR. The video cassette should have the window side 4. If you do not wish to record record DVD+VCR. 3. Notes: pen quite easily tab on the back that you have correctly connected your as described earlier in this book. Press POWER to turn recording. Press EJECT. It is DVD+VCR 2. Press STOP to end LP. using recording. paused for up to 5 minutes; RECP will when a tape is paused. After 5 minutes your DVD+VCR will stop recording to prevent damaging the tape or your DVD+VCR. 8. which enables you to record up to twice the amount of time on a video cassette. For example an E-180 will record up to 180 minutes unwanted be Tapes be displayed can Recording (ITR) start recording immediperiod of time or until the video cassette Your DVD+VCR recording Press PAUSE/STEP to continue a variety Instant Timer Press PAUSE/STEP to avoid scenes. with the the hole tape. Remember you can record one programme while watching another by starting your instant recording, press TV/VCR to select TV mode and then a different channel on your TV. selecting with Operation tape recording using On Screen Display Timer PR DATE TIME PR-03 You may set up to seven timer record events within one month of the current date. :: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -- ~ SP -- SP -- SP -- SP -- SP -- SP -- SP -- SUMOTUWETHFRSA Note: Before setting the timer make set the DVD+VCR clock sure correctly that you have and you know which stations you have tuned TV stations DVD+VCR. on 6. Use v/V/1/2 buttons to enter the DATE a video cassette with protection tab into your DVD+VCR. The video cassette should have the window side facing 2. up and the -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 7. ). Press B and press v PR PR DATE TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -~ -~ :: -- -~ :: -- -~ :: -- -~ :: -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -~ -- -- -- -- -- -- SP SP SP SP SP SP Press ENTER/OK to start -- SP -- -- -- SP -- -- -- SP -- -- -- SP -- -- -- SP -- -- -- setting the timer record 8. DATE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ Press 1 or 2 to -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- SP SP SP SP SP SP SP or or recording speed. V to select the desired tape speed (SP, LP). IP mode determines how much tape is left and SP -- SP -- PR SP -- PR-03 SP -- entering the date following automated select, then press ENTER/OK to confirm. DLY To record every day (except at the same time. Saturday and Sunday) same DATE TIME 41 4 :: 00 1 5 30 ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- SP -- to enter the date of the SU~SA To record at the :: -- SP -- programme. If you press ENTER/OK before you may select one of the recording features. -~ when VPS/PDC is ON. SP -- If all timer record events are full press v or V to select the event that you wish to remove and replace. Press b to delete the event. (v/V) -~ speed from SP to LP, if necessary, plete recording the program. IP mode is not Note: Use the PR/TRK -- switches TIME -- -- :: ON : Press B to select the Press v to enter the station that you -- :: , wish to record then press 2. PR ~ -- IP, (v/V) on or TIME 41 4 :: 00 1 5 30 -- event. Use the PR/TRK V to switch VPS/PDC SP -- DELETE: or DATE PR-03 VPS/PDC 5. -- :: off. Press ENTER/OK. 4. :: Press i. Press1or2toselectREC( 3. SP ~ -- away from you. facing arrow TIME 41 4 :: 00 1 5 PR-03 Insert start and Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. your PR 1. recording end times of the programme that you wish to record. time every week. :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP to com- selected Operation Operation with tape recording using On Screen Display (Continued) Timer 9. Press i to set another timer record event and follow steps 3 to 8. Check that the timer event details Press i return to are correct. screen. If PLEASE CHECK is displayed, you have entered and will need to re-enter the data. incorrectly 10. Press POWER to switch your DVD+VCR to Timer Standby mode. mode for the timer The timer standby ing. recording. During timer automatically power off when ends. recording standby mode, the DVD operated. To use the and VCR mode cannot be DVD+VCR, press POWER. After you use the DVD or VCR, press POWER again to put the VCR into timer recording standby mode. If at a later date you wish to delete or change any of settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Use v the or V to select the event that you wish to delete or change. Press b to delete the event...or Press ENTER/OK to change; then press b or B to select; Station, Date, Start and End times and recording speed. Press v or V to enter the correct information. If Timer record events Make sure Overlap... that the events do not preset times of the timer recording overlap. If they do, the earlier pro- gramme will always Example: Programme 1 is be given priority. programmed to start at 16:00 and programmed to start at 16:30 and end at 17:00. Programme end 2 is recording, Programme System (VPS) Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be recorded exactly from their beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start, or if the programme is extended beyond its scheduled time. Also, if a programme is interrupted, for example, if a news flash is inserted, the recording will also be interrupted automatically and resumed when the by the TV station and this recordings from TV broadcasting these signals. It should be set OFF for all timer recordings from TV stations that are not broadcasting these signals. stations The similar new Notes: Recording timer The Video being Timer a Video *** The DVD+VCR will performing VPS should be set ON for all timer will appear in the display window while your DVD+VCR waits to make the record- ) 11. Press POWER to end timer DVD while controls the timer in the video recorder. recording. symbol ( w atch a press DVD to select DVD mode. programme continues. The VPS signal is broadcast Note: The 1W Mode is not available in the To at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme will be recorded.) 2 in the system PDC, which is used in the time Netherlands, can also be used with your video recorder. Operation VCR part Additional - Hi-Fi Stereo Sound Your VCR will record In addition it has a Tape Counter Memory Stop System and playback Hi-Fi stereo sound. digital stereo sound to record and playback the stereo NICAM decoder. This allows you sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo The Digital Tape play window instead of the time displayed on the disby pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape. 1. Counter be can Press CLK/CNT. tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo Press CLEAR to set the counter to 0:00:00. audio The 1. system, video disc Your VCR's NICAM to Press N another Hi-Fi VCR. or sound decoder allows you sound, as well as digital broadcasts with NICAM enjoy 2. briefly displayed couple of seconds: on the TV for screen start recording. Press x when playback or recording is complete. standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be or tape counter will display the actual play time in hours, minutes and seconds. Press m. The a tape will rewind and automatically stop when the counter returns to 0:00:00. STEREO NICAM Sound is and automatically mono recorded tracks of the video on the Hi-Fi stereo To set the decoder tape. BIL NICAM Both audio channels will be recorded stereo tracks. The will be recorded primary language on the mono on the Hi-Fi channel (left) track of the video tape. MONO The sound is recorded mono 2. track of the video Press AUDIO the Hi-Fi tracks and the on tape without any separation. until the desired audio mode repeatedly We have already described, how to connect a decoder pay-TV station as CANAL+ or PREMIERE on page 9. For the recording of an encoded station you do not have to control anything. You just select the station and wait shortly until the decoding will start. for 1. appears. 3. Press F The choice is STEREO, LEFT, RIGHT and MONO. In BIL NICAM playback the primary language is outthe secondary channel is the right channel when put on the left channel and output simultaneously from audio output is set to STEREO. The primary language will be output from both chanPlease note that setting is MONO. when adjusting the tracking 2. On Screen Display (F.OSD) You may easily amount of tape display the current time or tape counter, left, day, month, year, day of week, channel, programme tape speed and operational mode of your DVD+VCR on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. Press CLK/CNT to Press CLK/CNT display. repeatedly The to display options. tape tape left will appear if there is 2. cycle through the counter and amount of a tape loaded. After 3 seconds the Displays will clear majority of the On Screen leaving only the clock or tape counter and the amount of Press CLK/CNT the TV screen. again to tape left remove all on the screen. displays from Press D ON: will appear on the TV screen. G to select the DECODER. or E to select. When the decoder is connected to the AV2 socket. OFF: When another VCR is connected to the AV2 socket. 3. control Hi-Fi stereo sound may revert to MONO. menu or Press ENTER/OK. nels when the audio 1. Press i. The main Press i to return to a TV picture. Operation Additional Operation - VCR part Wide Screen Compatibility This feature informs you that there is a problem with your DVD+VCR. These error messages will appear on the TV Your DVD+VCR record and screen. format programme Video Doctor 1. (Self-Diagnosis) Press 1 or 2 to select back wide play aspect ratio programmes (16:9). To record signal screen Press i. can successfully by screen wide a the correct must be broadcast 16:9 type screen of wide the TV station. . 1. Press ENTER/OK. Switch on your DVD+VCR. Press i. PressForGtoselect ANTENNA CONNECT HEAD STATUS . Press ENTER/OK. TAPE STATUS NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME Pr-12 P SET R ACMS SET SYS fOSD ON OFF 2. Press 3 or 4 to check a Pr-12 problem. ANTENNA CONNECT O PLEASE CHECK: Connect the aerial into the P SET R jack securely. 2. Lock switched off using 1. on Only recording. be can be operated pressed a few seconds. again to switch off the child lock. display window. menus from the TV playback you using a SCART (Power screen. must connect cable. Mode) save an Press i. The main If any buttons on the front of your unit are SAFE will flicker in the display window for the Wide-Screen place your DVD+VCR into economic power save mode. Nothing is displayed in the display window. Press F menu or will appear on the TV screen. G to select the 1W ON/OFF. Press ENTER/OK. work. Press LOCK Normal format Set 1W ON/OFF to ON to 1 Press LOCK. OFF will appear in the remove Wide-Screen your VCR to the TV screen. and SAFE will appear in the display window. None of the buttons on the front of your unit will 2. enjoy 1W Mode only recording playing back and recording recordings (16:9). Press i to To recording. from the TV can and for format 3. the front of the unit that your unit the remote control. so 16:9. or Only for playing back recordings (4:3). place (Child Lock) The control buttons 4:3 16:9: NEXT TIMER PROGRAMME PR-01 26 10:00~11:00SP Shows the current status of timer menus to repeatedly AUTO, programmes Wide-Screen and Normal programmes as normal. 4:3 O the Press v/V S as NO. OF TIMER PROGRAMME O2 Shows the number of timer remove ON OFF (Playback mode only) Automatically plays back Wide-Screen TAPE STATUS O NOT RECORDABLE: Insert a tape with its protection tab in Press i to ON OFF AUTO O 3. P SET R SYS SET fOSD select: HEAD STATUS PLEASE CLEAN: Clean your video heads. Pr-12 ACMS fOSD 2. Press D 3 Press i. or E to select the ON. Notes: Some function may not be ? operated in the 1W Mode. The 1W Mode is not available in the standby mode for recording and when turn Power off of the DVD+VCR after receiving the encoded television signals (CANAL+ or PREMIERE). the timer ? The encoded television MIERE) are signals (CANAL+ or not decoded in the 1W Mode. PRE- Additional from External Recording You record from can camcorder external 1. Operation or VCR part Components component, such as a to any of the DVD+VCR's inputs. Make sure that the from is connected 2. external an VCR, connected - Press AV component you properly repeatedly want to record to the DVD+VCR. to select the external You recording the of your unit. recording from EURO AV2 DECODER on & (Left 3. Load 4. Set 5. the from EURO AV1 SCART recordable on to jacks tape or Press REC/ITR Press STOP to on or LP) as necessary by component. If the Remote Control lights once can 5. want to to start in the window. display confirm the ? If your source is copy-protected using CopyGuard, you will not be able to record it using this unit. See Copyright on page 5 for more details. fixed length of recording start recording, position. a point from the Remote Control. manually to begin time, playing, press STOP to copying. If the DVD you are tected, you will not be able to copy the disc. It is not attempting to copy is copy pro- permitted to copy Macrovision encoded DVDs (or Discs). "LOCK" is displayed in the display window. ?Y ou must stop the copy process manually when the ends, or the unit may rep lay and record DVD movie ? Recording. at the Notes: ? ? record for on When the DVD is finished end stop recording. Before results, pause playback Press REC/ITR over o place on the DVD from which you dubbing using the N, BACKWARD, The DVD goes into PLAY mode and the VCR goes into RECORD mode. If the DVD disc menu appears, Notes: Timer tape into the VCR deck. which you want to record. 4. tape. disc in the external The REC indicator ?T blank VHS video For best on recording. 7. a you may need to press N you have a TV attached to your DVD+VCR, you see the video playing. 6. tape. copying. recording mode (SP pressing LP repeatedly. the VHS Find the start the front of your unit. a Play a Insert rear Right) jacks a DVD to 2. of your unit. AV 3 for recording from VIDEO IN and AUDIO IN jacks a FORWARD and PAUSE functions. AV 1 for rear copy the contents of Insert the disc you wish to copy into the DVD deck and close the disc tray. record from. AV 2 for can 1. 3. input from DVD to VCR Copying see Instant and over again. When you stop the DVD the recording on VCR is playback during copying, stopped automatically. Operation General Playback features Buttons Z X (OPEN DVD Part - Discs Operations / CLOSE) (PAUSE) Opens closes the disc or During playback, Press X ./> repeatedly or to playback. play Frame-by-Frame. press . During playback, ter/track tray. press X to pause to return to the or > to go to the next of the current chap- beginning chapter/track. Press . twice briefly to step back to the previous chapter/track. m/M During playback, press required scan speed. m or M repeatedly to select the DV D, DivX Video disc; 4 steps CD, MP3, WMA, Audio CD While the ; 3 playback is paused, press (4 steps, forward only). steps M repeatedly to in play slow motion REPEAT press REPEAT During playback, desired DVD Video discs: Video A-B repeatedly to select a repeat mode. Chapter/Title/Off CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off During playback, each press of A-B button to select point A point B and repeats a sequence from point A (Starting point) to point B (End point). Press CLEAR to exit. and ZOOM During playback or pause mode, press ZOOM to enlarge the image (4 steps). You can move through the zoomed picture using bBvV video buttons. Press CLEAR to exit. RANDOM TITLE During playback playback. (ANGLE) in stop mode, press RANDOM for random If the current DVD title has the DISC MENU or screen. The disc a menu, the title Otherwise, the disc menu appears on the menu menu appears on may appears. screen. During playback of DVD disc contains scenes recorded differcamera angles, press ANGLE repeatedly to select a desired angle. ent (SUBTITLE) During playback, press SUBTITLE repeatedly language. to select a desired subtitle (AUDIO) During playback, press AUDIO repeatedly language or audio track. audio to hear a different Playing Notes a DVD general on Video CD or features: Marker Search OnaVideoCDwithPBC,youmustsetPBCtoOffon setup menu to use the repeat function (See "PBC" on page 18). ? To enter Marker a the If you press > once during Repeat Chapter the repeat playback cancels. ? (Track) playback, playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine can start ? Zoom may not work ? When you are playing a DVD disc contains scenes recorded different camera angles, the angle indicator To Recall will blink 1. the TV on different angles possible. is ? The A-B current repeat on some screen as an DVDs. You during markers. recorded at scenes indication that angle switching 2. function is available only in the chapter/track. During disc search menu Press ENTER and You can play any marker the marker search menu. five+ This speakers (instead of the speakers normally required for multi-channel audio a home theater system). player remove player. Press DISPLAY or the during playback. by inputting its number option will be option. highlighted. scene from the last disc that remains in memory even if the disc from the player or switch off the scene If you load a disc that has the is automatically recalled. scene memorized, scene This Use1or2totoselect"3DSUR". To turn off the 3D Surround effect, select "Normal". player does not memorize the you switch off the disc. player before scene of commencing a disc if to play Screen Saver 1. 2. Press AUDIO The during playback. on To return to normal playback, press AUDIO repeatdisappears from the menu until "3D SUR." the menu screen. screen. Time Search To start playing at any chosen time on the disc: 1. Press DISPLAY 2. Press v / V to select the time clock icon and during playback. "--:--:--" appears. 3. Use numerical buttons to input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. 4. Press ENTER to confirm. selected time. Playback starts from the appears when you leave the DVD mode for about five minutes. screen saver player "3D SUR." appears edly on Note: 4 to select the sound The sound 3. starts from the marked Memory memorizes last is viewed. The last you Use 3 marker 3D surround effect that simulates multi- a Last Scene 2. playback a Or, Press CLEAR and the marker number is channel audio from two stereo 1. press SEARCH. The marker appears on the screen. playback, erased from the list. 4. 3D Surround from Marked Scene seconds, press b / B to select number that you want to recall or clear. 3. Additional features produce a Within 10 scene. To Clear or in Stop the Operation Playing This unit can Audio CD an Audio CDs play MP3/WMA file or MP3/WMA files record- or ed media. MP3/ WMA/ Audio CD Once you insert Audio MP3/WMA files recorded media an appears on the TV screen. Press v / V to select a track/file then press PLAY CD, or a menu ENTER and playback starts. You can use variable or 0:00:00 List 1-Music1 Track3 2-Music2 Track4 3-Music3 Track5 4-Music4 Track6 5-Music5 Track7 6-Music6 Clear All Track8 DISPLAY 3. Clear All Info When PROGRAM Edit 4. track playing file a titles, you information such containing can see the information as by pressing 5. DISPLAY. [ Song, Artist, Album, Comment, Genre On move ] 6. to the next page. CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or ? limited menu is player is ? ? 48 kHz within Sampling frequency: (MP3), 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 384 kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates ? - - ISO 9660 file File names on the "List", then press ENTER Select the track you want to start "Program" list. Press PLAY To resume to or ENTER to start. playing on the Playback begins in list have played normal playback track a on once. from programmed play- the list and then press PLAY. Repeat Programmed Tracks ? Track: ? All: ? Off(No display): a desired repeat mode. the current track repeats repeats all the tracks does not the "Program" play repeatedly. list. on If you press > once during the repeat playback cancels. must incorporate They should not maximum of 8 letters and a 1. 2. Repeat Track playback, a .mp3 or .wma extension. contain special letters such as a 3. "Program" During STOP the mark will appear E List mode, press PROGRAM and Use vVbBto select the track that you wish to from the Program list. Press CLEAR. tracks 1. / ? folder should be less Track from erase an The total number of files in than 1190 files. Erasing 2. on the Erasing system. should have *:"<>letc. ? track a - an ? program edit mode, Note: follows: - ? appears. mark will appear. E again to exit the disappear. Press REPEAT to select highlighted. with this compatibility within 8 32 ? as top of the on MP3 / WMA disc ? Select back, select a PHOTO word menu mark will E "Program" Press DISC MENU to MP3/WMA files recorded MUSIC the order in which you programmed the tracks. Playback stops after all of the tracks on the Tips: ? or or place the selected track on the "Program" list. Repeat to place additional tracks on the list. ID3 TAG ? Audio CD an Press PROGRAM. The then the 7-Music7 PROGRAM Edit Insert media. AUDIO CD Press PROGRAM Program Track1 Track2 1. contain 30 tracks. can Note: 1/12 List Program A program 2. MUSIC 1/12 0:52:07 The program function enables you to store your favorite tracks from any disc in the player memory. play- back functions. Refer to page 26-27. AUDIO CD Programmed Playback Repeat step Complete Program During STOP the mark will appear E 1~3to erase additional the list. mode, List press PROGRAM and Use vVbBto select "Clear All", then press ENTER. Note: The programs are also cleared when the power is off the disc is removed. 28 or Viewing This unit 1. can JPEG file a JPEG files recorded media. play Insert a menu appears Moving JPEG files recorded media. The PHOTO on the TV to another File Press . ing screen. PHOTO a or picture > or cursor (b or B) to advance to the next once or while view- previous file. Zoom Preview List During watching pictures, press ZOOM to enlarge the image (4 steps). You can move through the zoomed picture using bBv Folder 00 video Folder 01 >>> Folder 02 Folder 03 Folder 04 V buttons. 01 FILE 01 02 FILE 02 To rotate 03 FILE 03 /FILE 01 picture Press v / V during showing ture clockwise 2. Press v / V to select a or a picture to rotate the pic- counter clockwise. folder, and press ENTER. A list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER JPEG disc or PLAY. as ? 4. To return to the PHOTO menu while watching pic- ous are in Folder file list and want to return to the a list, use Depending v / V buttons to be too previ- upon the size and number of JPEG a long time for this unit to read highlight Press DISC MENU to move large --- reduce the resolution of the JPEG files to less than 5 million and pixels and burn another disc. press ENTER. ? is limited player the disc's contents. If you do not see an on-screen display after several minutes, some of the files may Tips: If you with this files, it could take tures, press STOP. ? compatibility follows: ? to the next page. The total number of files in a folder should be less than 1190 files. ? There >> ? are three Slide (Normal) and Speed options (Slow). Use vVbBto highlight select the you want to option . Then, use : >>> use (Fast), ? b / B to then press ENTER. a disc with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or ? While help top of the on watching a picture, menu is ? menu. ? a different Ensure that all the selected files have the If the files have rename highlighted. press RETURN to hide the Some discs may be incompatible due to recording format or the condition of disc. extensions when On PHOTO word ? > File them names to be read shown as copying ".jpg" layout. ".jpe" or ".jpeg" extensions, please ".jpg" file. as without by into the CD ".jpg" extension will not be able this unit. Even JPEG image though the files files in Windows are Explorer. Slide Show Use vVbBto press ENTER. highlight the (Slide Show) then Still Picture 1. Press PAUSE/STEP The 2. player will now slide show. go into PAUSE mode. To return to the slide PAUSE/STEP during show, press PLAY or press again. 29 Operation Playing Using 1. this DVD Insert DivX Movie file a Player you can play DivX file. DivX disc DivX file recorded media. The MOVIE a appears the TV on menu compatibility as follows: ?A v ailable with this player is limited screen. MOVIE 720x576 0:00:00 resolution size of the DivX file is under (W x H) pixel. List ? Movie Folder 1 The file name of the DivX subtitle is available Movie Folder 2 by 56 characters. Movie Folder 3 Movie Folder 4 Movie Folder 5 ? Movie Folder 6 Movie Folder 7 If there is impossible code to express in the DivX as mark on the file, it may be displayed Movie Folder 8 " " _ display. 2. Press v / V to select a folder, and press ENTER. A ? list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. You can use variable playback functions. Refer to Press STOP to is not stop the playback. The Movie ? menu If you are in a file list and want to return to the previFolder list, use the v / V buttons on the remote to On ? ? DivX CD with menu is highlighted. picture may not displayed properly while DivX playback. Set your TV system to AUTO or PAL-60 mode to restore the picture, if available. The disc subtitle may not be displayed properly, if DivX subtitle is downloaded through the internet. If the Disc Subtitle DivX subtitle title may not setup menu a does not have the language you are going be displayed properly. to play, Playable the sub- called 1-point, 2-point, or encoding, 3-point GMC. DivX file .avi, .mpg, .mpeg Playable The different levels of GMC are usually encoders, like Xvid, have this option. or There to the next page. switch of the ? move MP3/WMA, JPEG and MOVIE file, you MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top a audio is out- GMC? MPEG4 standard. Some MPEG4 and press ENTER. Press DISC MENU to can or GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in ous ? interleaved, either video If the file is recorded with GMC, the unit supports only 1-point of the record level. * highlight 30 putted. Tips: ? over ?I f the video and audio structure of recorded file appears ? frame is screen normally. page 26-27. 4. If the number of the per 1 second, this unit may not operate Subtitle format SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 1.0(*.sub) SubViewer 2.0(*.sub/*.txt) TMPlayer(*.txt) Playable Codec format "DIVX3.xx Notice for displaying If the subtitle does not the DivX subtitle display properly during playback, press and hold SUBTITLE about 3 seconds then press b / B to select another language code until the subtitle is displayed properly. "MP43 ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", ", "3IVX ". Playable Audio format "Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 8 48 kHz (MP3), within 32 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 192kbps (WMA) Not all the WMA Audio format is compatible with ? - - ? - - ? this unit. 30 Playing This unit will a play DVD VR format Disc DVD-R/RW discs recorded DVD-Video format that have been finalized using using a the DVD-recorder. ? This unit will Video 1. play DVD-RW discs Recording (VR) format. Insert a disc and close the recorded tray, It start the using playing automatically. 2. The DVD-VR menu appears on the TV screen when you press DISC MENU buttons while playing. DVD-VR 3. Press v / V to select ENTER and 4. a playback Press DISC MENU to track then press PLAY or starts. move to the list menu. Note: ? Unfinalized DVD-R/RW discs cannot be played in this player. ? Some DVD-VR disc DVD RECORDER. are made with CPRM data Player does not by support these kinds of discs. What is 'CPRM'? CPRM is a copy protection system (with scramble system) only allowing the recording of 'copy once' broadcast programs. CPRM stands for Content Protection for Recordable Media. This player is CPRM compatible, which means that record copy-once broadcast programs, but cannot then make a copy of those recordings. you CPRM recordings can only be made on DVD-RW you can discs formatted in VR be mode, and CPRM recordings only played players compatible with CPRM. can on that are specifically Operation Additional Controlling Operation other TVs with the Maintenance and Service remote control Refer to the information in this You can control the sound level, input power switch of your LG TV with the control. You can control the sound source, and supplied level, input remote source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropri- ate manufacturer code. 1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV the table (see below). contacting When save at the more them than one at code number is one a one carton and packing the exterior surfaces clean Keeping ? listed, try entering time until you find the original shipping factory. Do not near If the materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed Release TV POWER button. Code numbers of controllable TVs before the unit shipping Please chapter service technician. the Unit Handling ? 2. a that works with use volatile liquids such as insecticide spray the unit. Do not leave rubber or plastic products in contact long period of time. since they with the unit for a leave marks the surface. on your TV. Cleaning Manufacturer Code Number LG / GoldStar 1 (Default), the unit To clean the player, use a soft, dry cloth. If the surfaces extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. 2 are Zenith 1,3,4 Samsung 6,7 Sony 8,9 Do not use Hitachi 4 thinner, as Note: ? Maintaining Depending on function the on your TV, TV, all buttons may not after entering the correct ? even If you enter a new code number, the code number previously entered will be erased. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the might damage as alcohol, benzine, the Unit appropriate code number again. The DVD+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of For details, please service center. or the surface of the unit. some or manufacturer code. ? strong solvents such these use. contact your nearest authorized Language and Area Code List Language Code Use this list to input List your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 Guarani 7178 Moldavian 7779 Tagalog Tajik 8476 6590 Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Tu r kish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Tu r kmen 8475 Cambodian 7577 Italian 7384 Por tuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 8373 8471 8479 Area Code List Choose a area Area code from this list. Code AF Area Code Area Code Area Code ET Malaysia MY Saudi Arabia SA FJ Maldives MV SN Finland FI Mexico MX France FR Monaco MC Senegal Singapore Slovak Republic BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU Afghanistan Argentina AR Ethiopia Fiji Australia AU Austria AT Belgium SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Po r tugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Czech Republic Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg UG Refrnce Troubleshooting Check the following guide for the possible cause Symptom of a before problem service. contacting Cause Correction No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does No disc is inserted. Insert The TV is not set to receive this unit's Select the signal output. on a cord into the wall outlet disc. not work. No picture. appropriate video input mode the picture from the this the TV so unit appears No sound. Connect the video cable into the securely. The Progressive Scan is set to "On" on the setup menu but is connected to a standard (analog) television. Set The Select the correct equipment connected with the The audio cables are not connected (see Progressive page 16). audio receiver The power of the equipment connected with the audio cable is turned off. Tu rn on the Set the Audio option tion, then on The disc is Clean the disc. The DVD not start player does playback. dirty. The TV channels An unplayable are not tuned in properly. Check Insert disc is inserted. jacks connected with equipment position. is set to the wrong mode of the input so the audio cable. turn by pressing poor. Scan to "Off" Connect the audio cable into the securely. option jacks you can listen to the sound from the this unit. securely. The Audio is screen. securely. signal output. picture the TV The video cable is not connected audio cable is not set to receive DVD The on posiplayer again POWER. tuning, a to the correct the DVD carry out playable disc. tuning again. the disc (Check type and Regional code.) The disc is placed upside Place the disc with the down. playback side down. The disc is not within the placed guide. Place the disc inside the dirty. The level is set. Cancel the the The remote control There is does not work remote control and this unit. properly. an the disc tray correctly Clean the disc. The disc is Rating on guide. obstacle in the path of the The batteries in the remote control are Rating function or change level. rating Remove the obstacle. Replace the batteries with new ones. exhausted. Video tape cannot be Is the cassette compartment empty? Eject the tape in. inserted. No Hi-Fi sound Audio mode is not set properly. Select "STEREO" "AUDIO" No NICAM sound recording 34 NICAM mode is not set properly. Make on sure by repeatedly pressing the remote control. NICAM in the menu is set to AUTO for the station to be recorded. Specification General Power requirements AC Power consumption 17W Dimensions Mass (approx.) 200-240V, 50/60 Hz 430x78.5x265mm(WxHxD) 4.2 (approx.) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% Timer 24 hours (41˚F to 95˚F) Refrnce display type System Laser Semiconductor Video Head laser, wavelength Double azimuth 6 system 650 heads, helical scanning. Signal system PAL Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response nm CD:8Hzto20kHz ratio Signal-to-noise More than 100dB (ANALOG Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB OUT connectors only) (DVD) (CD) Inputs (VCR) Audio Video -6.0dBm, -6.0dBm, more than 10 kohms more than 47 kohms 1.0 75 Vp-p, (SCART) (RCA) ohms, unbalanced (SCART/RCA) Outputs (DVD) VIDEO OUT 1 (Progressive Scan) Vp-p 75 ohms, sync negative (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 RGB 0.7 COMPONENT VIDEO OUT output Vp-p, x 1 75 ohms Audio output (coaxial audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (analog audio) 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R)x2/SCART (TO TV) Outputs (VCR) Audio -6.0dBm, less than Video 1.0Vp-p, RGB 0.7 output Design and specifications are subject to Vp-p, change 75 1 kohms (SCART) ohms, unbalanced (SCART) 75 ohms without notice. P/NO: 3834RV0046P
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement