LG AS60GDWV0 Owner’s Manual
LG AS60GDWV0 is an air purifier designed to improve indoor air quality. It features a 3-step filtration system with a pre-filter, a HEPA filter, and a deodorization filter. It also has a built-in ionizer to remove harmful particles and odors. The air purifier is easy to operate with a simple control panel and a remote control. It also has a timer function and a sleep mode for added convenience.
PDF
Download
Document
Advertisement
Advertisement
OWNER'S MANUAL AIR PURIFIER Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. This manual is the simplified version of original manual. You can obtain the original manual from www.lg.com. EN English BG Български CS Čeština DE Deutsch ES Español FR Français HU Magyar IT Italiano PL Polski NO Norsk SV Svenska MFL69726815 Rev.03_062019 www.lg.com Copyright © 2018 - 2019 LG Electronics Inc. All Rights Reserved. EN TABLE OF CONTENTS This manual may contain images or content different from the model you purchased. This manual is subject to revision by the manufacturer. SAFETY INSTRUCTIONS�����������������������������������������������������������������������������������04 Disposal of waste batteries/accumulators......................................................................... 10 Disposal of your old appliance����������������������������������������������������������������������������������������� 10 INSTALLATION�����������������������������������������������������������������������������������������������������11 Removing Packing Materials���������������������������������������������������������������������������������������������11 Remote Controller������������������������������������������������������������������������������������������������������������ 12 OPERATION����������������������������������������������������������������������������������������������������������14 Appliance Overview���������������������������������������������������������������������������������������������������������� 14 SMART FUNCTIONS�������������������������������������������������������������������������������������������17 Using the SmartThinQ Application����������������������������������������������������������������������������������� 17 MAINTENANCE����������������������������������������������������������������������������������������������������20 SAFETY INSTRUCTIONS EN READ THESE INSTRUCTIONS CAREFULLY This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product. All safety messages will be preceded by the safety alert symbol and the hazard signal word WARNING or CAUTION. These words mean: WARNING - Y ou can be killed or seriously injured if you do not follow these instructions. CAUTION - Indicates an imminently hazardous situation which, if not avoided, may result in minor or moderate injury or product damage. This equipment is home (class B) EMI suitable equipment, which is mainly for home use, and it can be used in all regions. WARNING To reduce the risk of fire, electric shock or personal injury when using this product, follow basic safety precautions including the following: CHILDREN IN THE HOUSEHOLD This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. FOR USE IN EUROPE This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental 04 EN capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. INSTALLATION ••Install the product near an easily accessible electrical outlet. ••Do not install the product on an uneven or inclined surface. ••Do not install the product in a damp area and keep away from splashing rain or water. ••Do not install the product in an area exposed to direct sunlight or near heat-generating equipment. ••Do not install the product in a place where combustible gas may leak or industrial oil or metallic particulates are present. POWER ••This product is for AC 220–240 V. Always check the supply voltage before using it. ••Be careful not to let the power plug pressed by the back of the product. ••Remove the power plug when you clean the product or replace the filter. ••Do not touch the power plug with wet hands. ••Insert the plug into the outlet tightly after removing the moisture and dust on it completely. ••When unplugging the power cord, always pull it by the plug. ••Unplug the product during thunder or lightning or when not in use for a long time. 05 EN ••Do not bend the power cable excessively or place a heavy object on top of it. ••Do not extend the length of the power cable or alter it. ••Do not use several devices on a multi-socket extension outlet. ••The appliance shall be disconnected from its power source during service and when replacing parts. ••Take care to ensure that power cable could not be pulled out or damaged during operation. There is risk of fire or electric shock. ••If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. USE ••If the product is immersed in water, stop using it and contact the LG Electronics service center. ••If there is a gas leakage (isobutane, propane, LNG, etc.), do not touch the product or power plug and ventilate the area immediately. ••Do not clean the product with brushes, cloths or sponges with rough surfaces or which are made of metallic material. ••If you detect any abnormal noise, odor or smoke, unplug the product immediately and contact an LG Electronics service center. ••Only an authorized repair person from LG Electronics service center should disassemble, repair, or modify the product. ••Do not use or store fire, combustibles (ether, benzene, alcohol, drugs, propane, butane, combustible spray, insecticide, air freshener, cosmetics etc.) or flammable materials (candles, lamps etc.) near the product. 06 EN ••Do not place the power cord under rugs, carpeting or mats. ••Do not allow animals or pets to chew on the power cord. ••Do not allow children to climb on or play with the product. ••Do not move the product when it is in operation. ••Do not place coffee, flower vase or drinks on top of the product. ••Do not insert hands or metal objects into the air inlet or outlet. ••Do not impact the product. ••Be careful not to allow any part of your body to be pinched when you detach and re-attach parts of the product. ••Unplug the product when not in use for a long time. ••Do not install and use broken parts. ••Do not clean the product when it is plugged in. ••Do not put flammables into the product. ••Do not operate the product while its cover is open. ••Do not swallow the battery. It may cause injury, including damage to the internal organs or death. DISPOSAL ••Dispose of the packing materials (vinyl, styrofoam etc.) to keep them out of reach of children. 07 EN CAUTION To reduce the risk of fire, electric shock, or personal injury when using the product, follow basic safety precautions, including the following: INSTALLATION ••Do not tilt the product to pull or push it while transporting. ••Do not install the product in transportation equipment (vehicle/ vessel etc.). ••Do not place the product near a TV or a stereo equipment. ••Do not place the product under bright light. ••The appliance shall be installed in accordance with national wiring regulations. ••When moving or storing the product, wrap the power cord around the base of the product to prevent personal injury, damage to the cord or damage to floors. ••Dropping the product may cause personal injury or product malfunction. USAGE ••Do not use the product for removal of toxic gas such as carbon monoxide. ••Do not use the product for ventilation purposes. ••Do not use the product for a long time in a region with unstable voltage. ••Do not place obstacles around the air inlet or outlet. ••For safe use of the product, children or others with reduced mental capabilities need to be closely monitored by a person who is responsible for their safety. 08 EN ••Do not place the product near curtains. ••Do not use the product for special purposes such as preserving plants, precision instrument, artworks etc. ••Do not climb or place objects on top of the product. ••Do not operate the product with wet hands. ••Do not let the moisture from the humidifier directly touch the product. ••Do not use the product while it is not in upright position. ••Do not use the product near objects vulnerable to heat. ••Use the filter only for its intended purpose. ••Do not use detergents, cosmetics, chemicals, air fresheners, or disinfectants in the product. ••Do not place magnetic or metal objects on top of the product. ••Do not clean with strong detergents of solvent types, but use soft cloth. ••Do not operate the Booster arbitrarily. ••Do not insert any objects into the Booster. ••Do not operate the product while the Booster cover and grill are separated. ••Do not insert hands or metal objects into the Booster. ••Do not modify the battery arbitrarily. It may cause a fire or electric shock. ••Misplaced battery may cause an explosion. ••Do not recharge or take apart the battery. It may result in explosion. ••Do not throw the battery in the fire for disposal or leave it near the heat. It may result in explosion. 09 EN Disposal of waste batteries/accumulators •• This symbol may be combined with chemical symbols for mercury (Hg), cadmium (Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead. •• All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. •• The correct disposal of your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health. •• For more detailed information about disposal of your old batteries/ accumulators, please contact your city office, waste disposal service or the shop where you purchased the product. (http://www.lg.com/ global/sustainability/environment/take-back-recycling/global-networkeurope) Disposal of your old appliance •• This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream. •• Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products, and other valuable materials that can be recycled to conserve limited resources. •• You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/ recycling. 10 EN INSTALLATION Removing Packing Materials 4 Unpack the product and remove any packing tape or protective vinyl before using the product. 1 2 Support Pull out the product from the packaging and remove the fixing tape attached on the product. Grab the top end of the back cover and gently pull it. • You will see "PM 1.0 & GAS SENSOR SYSTEM" on the back cover of the product. 3 Remove the support located at the filter inlet. Remove the cover from the product. 5 6 Remove the filter and its protective vinyl. Install the filter in the product. • Make sure that the handle faces upward. Handle 11 EN 7 Insert the fixing parts at the bottom of the cover into the holes at the bottom of the product before you close the cover. CAUTION Remote Controller 1 2 With the backside of the remote controller facing up, remove the battery tray from the remote control. Insert the battery provided with the product to the tray. • The (+) electrode of the battery must face upward. • Failure to remove the support may affect the performance of the product. Please be sure to remove it before use. • Make sure that you remove the filter's protective vinyl prior to use otherwise it may result in product malfunction. • Pay attention to the direction of the filter when you install the filter otherwise it may cause malfunction or failure of the product. 3 Insert the battery tray to the remote control. Back 12 EN WARNING •• A button/coin-shaped battery is used in the remote control of the product. •• Do not swallow the battery. It may cause injury, including damage to the internal organs or death. •• If you accidentally swallowed the battery, go to the doctor immediately for emergency treatment. If you fail to receive first aid within 2 hours after you swallowed it, you may experience damage to your internal organs or death in severe cases. •• Keep the battery out of reach of children. •• If the battery tray is not secured firmly, stop using the product instantly and keep it away from children. CAUTION •• Do not modify the battery arbitrarily. It may cause a fire or electric shock. •• Misplaced battery may cause an explosion. •• Do not recharge or take apart the battery. It may result in explosion. •• Do not throw the battery in the fire for disposal or leave it near the heat. It may result in explosion. NOTE •• If the battery runs out of charge, replace it with a new one (CR2025). •• If the remote control does not work as expected, try to replace the battery or check the polarity (+, -) of the battery. If the problem continues, contact the Service Center. •• Dispose of the used battery according to the environmental regulations. 13 EN OPERATION Appliance Overview Front View Air Outlet/Clean Booster Status Panel •• It discharges purified air through the filter. Use it to check the settings of the product and the air quality. •• You can control the direction of the air so that it reaches every corner of the room. Control Panel Light Lamp It displays the overall air quality using a colored light. Air Inlet (Front and Rear Covers) Air goes into the purifier through the inlet. You may remove the front or rear cover separately. Use it to set the product functions. Receiver for Remote Control Signal Air Ionizer •• It generates negative ions and removes harmful bacteria in the air. •• It is built in the lower part of the air purifier. •• The appearance or components of the product may differ depending on the model. 14 EN Control Panel Start/Stop Button Booster Speed Button You can start or stop the operation. It allows you to adjust the wind strength of the clean booster. Mode Button •• Press and hold it for 3 seconds or more to turn on or off the ionizer. Use it to set the operation mode. •• Press and hold the button for 3 seconds or more to turn on/off the Light lamp. Speed Button It allows you to adjust the wind strength of the product. •• Pressing and holding the button for more than 3 seconds activates the Wi-Fi registration mode. •• Buttons to turn Wi-Fi off Pressing and holding the Start/Stop button and the Speed button at the same time for more than 3 seconds turns off Wi-Fi. After finishing the product registration and while WiFi is off, pressing and holding the Speed button for more than 3 seconds turns on Wi-Fi so that you can control the product using a smartphone that has it registered. Swing Button It allows you to set the clean booster to turn left or right. Indicator Button You can check the concentration of the airborne dust by its particle size. Sleep Timer Button Use it to schedule the time to turn off the product. •• Press and hold it for 3 seconds or more to lock or unlock the Control Panel buttons. 15 EN Status Display Panel Display of air quality Icons 1 Overall air quality (color) 2 Dust particle size and dust concentration (color) 3 Dust concentration or sleep timer time 4 Smell concentration (color) Description It turns on when it is time to replace the filter. It turns on when the Wi-Fi function is activated. Displays operating mode It turns on when the sleep timer function is activated. Displays speed and booster speed It turns on when the 'On/Off Reservation' is set in the LG Smart ThinQ application. Speed: Displays the air purifier's wind strength. Booster speed: Displays the clean booster's wind strength. 16 Icon It turns on when the control panel is locked. It turns on when the ionizer turns On. EN SMART FUNCTIONS Using the SmartThinQ Application Install the "LG Smart ThinQ" application on your smartphone to use the product more conveniently. Installing SmartThinQ Find and install ‘LG Smart ThinQ’ from the App Store/Google Play Store on your smartphone. For more information on how to use 'LG Smart ThinQ’, refer to the Help in the app. Wi-Fi function Smart diagnosis When the product malfunctions or fails, you can check the product conditions through the smart diagnosis function and solve issues more conveniently. Settings You can configure the product management and alert settings. NOTE •• Wi-Fi only supports 2.4 GHz frequency. •• When registering the product, make sure that the Wi-Fi connection of the smartphone is on. •• If you can’t register the product by pressing the product’s Wi-Fi registration button, press the Wi-Fi registration button again. If you deleted the registered product from the app while Wi-Fi is off, the product registration may not work in one attempt when you press the Wi-Fi registration button again to register the product. •• To turn on the Wi-Fi function that has been off, press the Wi-Fi registration button just once and wait. The Wi-Fi connection will be re-established within 1 minute. (Pressing the button more than once initiates the Wi-Fi registration mode.) •• A wireless router and an Internet connection cable are separate purchase items required to use the app and you need to install them separately. •• To use the wireless network, you can contact an Internet service provider or install the wireless router on your own. When you install the wireless router on your own, please refer to the user manual enclosed with the wireless router. •• Install the wireless router at a location close to the product. The strength of the signal may be different based on the location and distance between the product and the wireless router, resulting in difference in the data transmission time thereby. •• The connection may not be established depending on the network environment. If you cannot connect to the network or there is a problem with the network settings, contact the network administrator or the Internet service provider. •• If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again. •• Be sure to use any alphanumeric combination to set the wireless network name (SSID), which appears when you search for Wi-Fi. •• When you search for a wireless router to connect to the wireless network, wireless routers other than the one you are using may also be found. Using other people's routers is illegal and, if you do so, you may be subjected to legal actions. You must connect to the wireless router authorized to use the network. •• The contents of this manual may vary depending on the version of the "LG Smart ThinQ" application, and they may be changed without prior notice. 17 EN Wireless LAN Module Specifications Model LCW-003 Frequency Range 2412 - 2472 MHz Output Power (max) IEEE 802.11b: 18.37 dBm IEEE 802.11g: 17.67 dBm IEEE 802.11n: 17.67 dBm Open Source Software License Notice Please visit http://opensource.lge.com to obtain open source codes developed under GPL, LGPL, MPL or other open source licenses that are included in this product. In addition to source codes, you can also download the contents of all licenses, copyright indications and indication of no warranty. For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. If you request open source codes for any software included in this product by sending an email to [email protected] within three years of purchasing the product, we will send the codes on a CD-ROM with minimal charges for the CD and shipping. EU Conformity Notice Smart Diagnosis function Hereby, LG Electronics declares that the radio equipment type Air purifier is in compliance with Directive 2014/53/EU. •• This only applies to the models with the logo. When the product malfunctions or fails, you can check the product conditions through the smart diagnosis function and solve issues more conveniently by using Smart ThinQ application. Wireless function S/W version : V 1.0 The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/ cedoc# LG Electronics European Shared Service Center B.V. Krijgsman 1 1186 DM Amstelveen The Netherlands. 18 EN Diagnosis via Wi-Fi 1 2 3 Check the product’s Wi-Fi connection status. Select the product for Smart Diagnosis among the registered products, and press the menu at the top right area of the smart-phone screen. Select Smart Diagnosis on the smart-phone screen, and press the Start Smart Diagnosis button. •• You can check the results of Smart Diagnosis in the ‘LG SmartThinQ’ app. If Wi-Fi Diagnosis Fails •• If the network connection is not smooth, Smart Diagnosis may fail. Press the Retry button to try again. •• If Smart Diagnosis via Wi-Fi keeps failing, press the Audible Diagnosis button, and follow the instructions displayed on the smart-phone screen to perform Audible Diagnosis. NOTE If any problems arise regarding the product after Smart Diagnosis, you can contact the Customer Center to find out more on the details of the diagnosis. 19 EN MAINTENANCE CAUTION •• You must stop operating the product and unplug it before you clean and replace the filter. •• Do not spray water directly on the product. •• Assemble the product in the reverse order of disassembly after cleaning the product and replacing the filter. •• How to distinguish between the front and back of the product: There is an LG logo on the front, while 'PM 1.0 & GAS SENSOR SYSTEM' is written on the back. Scheduled Maintenance Component Cleaning Frequency Replacement Frequency Only ultra-fine filter Filter If contaminated, clean the ultrafine filter with a vacuum cleaner or soft brush. 2 months The whole filter •• You may also request cleaning or replacement of the filter to the Service Center. You will be charged a certain fee for filter cleaning and replacement services. •• If there are no changes to the dust concentration on the status panel, clean the sensor regardless of the cleaning frequency (2 months) of the PM 1.0 sensor. For more information on cleaning the PM1.0 sensor, please see Cleaning the Dust Sensor. Alerts on the Status Panel When you see an alert message on the status panel, do the following: Alert 1 year Measures Replace the filter. NOTE - PM 1.0 (super ultra-fine dust) sensor NOTE •• The operating environment and operation hours may affect the cleaning frequency. We recommend that you should clean it more often in a dusty environment. •• If you do not clean the product according to the cleaning frequency, you may experience a bad odor and poor performance. 20 •• Filters are sold at the nearest Service Center or via the Consumables shop on the LG Electronics site (www.lg.com). •• Filter replacement alerts appear based on the maximum usage time, taking into account the operating hours of the product. The replacement frequency is determined by the operating hours and environment. •• For more information on how to disable a filter replacement alert, see Replacing the Filter. •• A filter is a consumable item. Therefore you must buy a new one for replacement when it has reached the end of its lifespan even during the warranty period. Quality Label A B C D AS60GDWV0 40 W E A (EN) Product Type / (BG) Вид изделие / (CS) Druh výrobku / (DE) Produkttyp / (ES) Tipo de producto / (FR) Type de produit / (HU) Termék típusa / (IT) Tipo di prodotto / (PL) Typ produktu / (NO) Prldukttype / (SV) Produkttyp B (EN) Model / (BG) Модел / (CS) Model / (DE) Modell / (ES) Modelo / (FR) Modèle / (HU) Modell / (IT) Modello / (PL) Model / (NO) Modell / (SV) Modell C (EN) Rating / (BG) Производителност / (CS) Rozsah / (DE) Stromversorgung / (ES) Valor / (FR) Tension nominale / (HU) Besorolás / (IT) Potenza / (PL) Wartość znamionowa / (NO) Vurdering / (SV) Klassificering D (EN) Power Input / (BG) Подадена мощност / (CS) Napájení / (DE) Leistungsaufnahme / (ES) Potencia / (FR) Puissance absorbée / (HU) Bemeneti feszültség / (IT) Alimentazione / (PL) Moc wejściowa / (NO) Strøminngang / (SV) Strömingång E (EN) Made In Korea / (BG) Произведено в Корея / (CS) Vyrobeno v Koreji / (DE) Hergestellt in Korea / (ES) Fabricado en Corea del Sur / (FR) Fabriqué en Corée / (HU) Made in Korea / (IT) Prodotto in Corea / (PL) Wyprodukowano w Korei / (NO) Produsert i Korea / (SV) Tillverkad i Korea MEMO MEMO MEMO MEMO MEMO ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 360° Purification
- PM1.0 Sensor and Gas Sensor
- Eliminate 5 kinds of Harmful Gas include Formaldehyde (The details are provided in below page)
- Clean Booster
- ThinQ™ IoT Smart Home Applianc