LG | AS60GDWV0 | Owner's Manual | LG AS60GDWV0 Owner's Manual

LG AS60GDWV0 Owner's Manual
OWNER'S MANUAL
AIR PURIFIER
Read this owner’s manual thoroughly before operating the appliance and keep it
handy for reference at all times.
This manual is the simplified version of original manual. You can obtain the
original manual from www.lg.com.
EN
English
BG
Български
CS
Čeština
DE
Deutsch
ES
Español
FR
Français
HU
Magyar
IT
Italiano
PL
Polski
NO
Norsk
SV
Svenska
MFL69726815
Rev.03_062019
www.lg.com
Copyright © 2018 - 2019 LG Electronics Inc. All Rights Reserved.
EN
TABLE OF CONTENTS
This manual may contain images or content
different from the model you purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS�����������������������������������������������������������������������������������04
Disposal of waste batteries/accumulators......................................................................... 10
Disposal of your old appliance����������������������������������������������������������������������������������������� 10
INSTALLATION�����������������������������������������������������������������������������������������������������11
Removing Packing Materials���������������������������������������������������������������������������������������������11
Remote Controller������������������������������������������������������������������������������������������������������������ 12
OPERATION����������������������������������������������������������������������������������������������������������14
Appliance Overview���������������������������������������������������������������������������������������������������������� 14
SMART FUNCTIONS�������������������������������������������������������������������������������������������17
Using the SmartThinQ Application����������������������������������������������������������������������������������� 17
MAINTENANCE����������������������������������������������������������������������������������������������������20
SAFETY INSTRUCTIONS
EN
READ THESE INSTRUCTIONS CAREFULLY
This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards
that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard signal word
WARNING or CAUTION. These words mean:
WARNING - Y ou can be killed or seriously injured if you do not follow these
instructions.
CAUTION - Indicates an imminently hazardous situation which, if not avoided, may
result in minor or moderate injury or product damage.
This equipment is home (class B) EMI suitable equipment, which is mainly for home use, and it can
be used in all regions.
WARNING
To reduce the risk of fire, electric shock or personal injury when
using this product, follow basic safety precautions including the
following:
CHILDREN IN THE HOUSEHOLD
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
FOR USE IN EUROPE
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
04
EN
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
INSTALLATION
••Install the product near an easily accessible electrical outlet.
••Do not install the product on an uneven or inclined surface.
••Do not install the product in a damp area and keep away from
splashing rain or water.
••Do not install the product in an area exposed to direct sunlight or
near heat-generating equipment.
••Do not install the product in a place where combustible gas may
leak or industrial oil or metallic particulates are present.
POWER
••This product is for AC 220–240 V. Always check the supply
voltage before using it.
••Be careful not to let the power plug pressed by the back of the
product.
••Remove the power plug when you clean the product or replace
the filter.
••Do not touch the power plug with wet hands.
••Insert the plug into the outlet tightly after removing the moisture
and dust on it completely.
••When unplugging the power cord, always pull it by the plug.
••Unplug the product during thunder or lightning or when not in
use for a long time.
05
EN
••Do not bend the power cable excessively or place a heavy
object on top of it.
••Do not extend the length of the power cable or alter it.
••Do not use several devices on a multi-socket extension outlet.
••The appliance shall be disconnected from its power source
during service and when replacing parts.
••Take care to ensure that power cable could not be pulled out or
damaged during operation. There is risk of fire or electric shock.
••If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in
order to avoid a hazard.
USE
••If the product is immersed in water, stop using it and contact the
LG Electronics service center.
••If there is a gas leakage (isobutane, propane, LNG, etc.), do
not touch the product or power plug and ventilate the area
immediately.
••Do not clean the product with brushes, cloths or sponges with
rough surfaces or which are made of metallic material.
••If you detect any abnormal noise, odor or smoke, unplug the
product immediately and contact an LG Electronics service
center.
••Only an authorized repair person from LG Electronics service
center should disassemble, repair, or modify the product.
••Do not use or store fire, combustibles (ether, benzene, alcohol,
drugs, propane, butane, combustible spray, insecticide, air
freshener, cosmetics etc.) or flammable materials (candles,
lamps etc.) near the product.
06
EN
••Do not place the power cord under rugs, carpeting or mats.
••Do not allow animals or pets to chew on the power cord.
••Do not allow children to climb on or play with the product.
••Do not move the product when it is in operation.
••Do not place coffee, flower vase or drinks on top of the product.
••Do not insert hands or metal objects into the air inlet or outlet.
••Do not impact the product.
••Be careful not to allow any part of your body to be pinched when
you detach and re-attach parts of the product.
••Unplug the product when not in use for a long time.
••Do not install and use broken parts.
••Do not clean the product when it is plugged in.
••Do not put flammables into the product.
••Do not operate the product while its cover is open.
••Do not swallow the battery. It may cause injury, including
damage to the internal organs or death.
DISPOSAL
••Dispose of the packing materials (vinyl, styrofoam etc.) to keep
them out of reach of children.
07
EN
CAUTION
To reduce the risk of fire, electric shock, or personal injury when
using the product, follow basic safety precautions, including the
following:
INSTALLATION
••Do not tilt the product to pull or push it while transporting.
••Do not install the product in transportation equipment (vehicle/
vessel etc.).
••Do not place the product near a TV or a stereo equipment.
••Do not place the product under bright light.
••The appliance shall be installed in accordance with national
wiring regulations.
••When moving or storing the product, wrap the power cord
around the base of the product to prevent personal injury,
damage to the cord or damage to floors.
••Dropping the product may cause personal injury or product
malfunction.
USAGE
••Do not use the product for removal of toxic gas such as carbon
monoxide.
••Do not use the product for ventilation purposes.
••Do not use the product for a long time in a region with unstable
voltage.
••Do not place obstacles around the air inlet or outlet.
••For safe use of the product, children or others with reduced
mental capabilities need to be closely monitored by a person
who is responsible for their safety.
08
EN
••Do not place the product near curtains.
••Do not use the product for special purposes such as preserving
plants, precision instrument, artworks etc.
••Do not climb or place objects on top of the product.
••Do not operate the product with wet hands.
••Do not let the moisture from the humidifier directly touch the
product.
••Do not use the product while it is not in upright position.
••Do not use the product near objects vulnerable to heat.
••Use the filter only for its intended purpose.
••Do not use detergents, cosmetics, chemicals, air fresheners, or
disinfectants in the product.
••Do not place magnetic or metal objects on top of the product.
••Do not clean with strong detergents of solvent types, but use
soft cloth.
••Do not operate the Booster arbitrarily.
••Do not insert any objects into the Booster.
••Do not operate the product while the Booster cover and grill are
separated.
••Do not insert hands or metal objects into the Booster.
••Do not modify the battery arbitrarily. It may cause a fire or
electric shock.
••Misplaced battery may cause an explosion.
••Do not recharge or take apart the battery. It may result in
explosion.
••Do not throw the battery in the fire for disposal or leave it near
the heat. It may result in explosion.
09
EN
Disposal of waste batteries/accumulators
•• This symbol may be combined with chemical symbols for mercury
(Hg), cadmium (Cd) or lead (Pb) if the battery contains more than
0.0005% of mercury, 0.002% of cadmium or 0.004% of lead.
•• All batteries/accumulators should be disposed separately from the
municipal waste stream via designated collection facilities appointed
by the government or the local authorities.
•• The correct disposal of your old batteries/accumulators will help to
prevent potential negative consequences for the environment, animal
and human health.
•• For more detailed information about disposal of your old batteries/
accumulators, please contact your city office, waste disposal service
or the shop where you purchased the product. (http://www.lg.com/
global/sustainability/environment/take-back-recycling/global-networkeurope)
Disposal of your old appliance
•• This crossed-out wheeled bin symbol indicates that waste electrical
and electronic products (WEEE) should be disposed of separately
from the municipal waste stream.
•• Old electrical products can contain hazardous substances so correct
disposal of your old appliance will help prevent potential negative
consequences for the environment and human health. Your old
appliance may contain reusable parts that could be used to repair
other products, and other valuable materials that can be recycled to
conserve limited resources.
•• You can take your appliance either to the shop where you purchased
the product, or contact your local government waste office for details
of your nearest authorised WEEE collection point. For the most up
to date information for your country please see www.lg.com/global/
recycling.
10
EN
INSTALLATION
Removing Packing
Materials
4
Unpack the product and remove any packing
tape or protective vinyl before using the
product.
1
2
Support
Pull out the product from the
packaging and remove the fixing tape
attached on the product.
Grab the top end of the back cover
and gently pull it.
• You will see "PM 1.0 & GAS
SENSOR SYSTEM" on the back
cover of the product.
3
Remove the support located at the
filter inlet.
Remove the cover from the product.
5
6
Remove the filter and its protective
vinyl.
Install the filter in the product.
• Make sure that the handle faces
upward.
Handle
11
EN
7
Insert the fixing parts at the bottom of
the cover into the holes at the bottom
of the product before you close the
cover.
CAUTION
Remote Controller
1
2
With the backside of the remote
controller facing up, remove the
battery tray from the remote control.
Insert the battery provided with the
product to the tray.
• The (+) electrode of the battery
must face upward.
• Failure to remove the support may affect
the performance of the product. Please be
sure to remove it before use.
• Make sure that you remove the filter's
protective vinyl prior to use otherwise it
may result in product malfunction.
• Pay attention to the direction of the filter
when you install the filter otherwise it may
cause malfunction or failure of the product.
3
Insert the battery tray to the remote
control.
Back
12
EN
WARNING
•• A button/coin-shaped battery is used in the
remote control of the product.
•• Do not swallow the battery. It may cause
injury, including damage to the internal
organs or death.
•• If you accidentally swallowed the
battery, go to the doctor immediately for
emergency treatment. If you fail to receive
first aid within 2 hours after you swallowed
it, you may experience damage to your
internal organs or death in severe cases.
•• Keep the battery out of reach of children.
•• If the battery tray is not secured firmly,
stop using the product instantly and keep it
away from children.
CAUTION
•• Do not modify the battery arbitrarily. It may
cause a fire or electric shock.
•• Misplaced battery may cause an explosion.
•• Do not recharge or take apart the battery.
It may result in explosion.
•• Do not throw the battery in the fire for
disposal or leave it near the heat. It may
result in explosion.
NOTE
•• If the battery runs out of charge, replace it
with a new one (CR2025).
•• If the remote control does not work as
expected, try to replace the battery or
check the polarity (+, -) of the battery. If
the problem continues, contact the Service
Center.
•• Dispose of the used battery according to
the environmental regulations.
13
EN
OPERATION
Appliance Overview
Front View
Air Outlet/Clean Booster
Status Panel
•• It discharges purified air through
the filter.
Use it to check the settings of the
product and the air quality.
•• You can control the direction of the
air so that it reaches every corner
of the room.
Control Panel
Light Lamp
It displays the overall air quality using
a colored light.
Air Inlet (Front and Rear Covers)
Air goes into the purifier through the
inlet. You may remove the front or
rear cover separately.
Use it to set the product functions.
Receiver for Remote Control Signal
Air Ionizer
•• It generates negative ions and
removes harmful bacteria in the air.
•• It is built in the lower part of the air
purifier.
•• The appearance or components of the product may differ depending on the model.
14
EN
Control Panel
Start/Stop Button
Booster Speed Button
You can start or stop the operation.
It allows you to adjust the wind
strength of the clean booster.
Mode Button
•• Press and hold it for 3 seconds or
more to turn on or off the ionizer.
Use it to set the operation mode.
•• Press and hold the button for 3
seconds or more to turn on/off the
Light lamp.
Speed Button
It allows you to adjust the wind
strength of the product.
•• Pressing and holding the button for
more than 3 seconds activates the
Wi-Fi registration mode.
•• Buttons to turn Wi-Fi off
Pressing and holding the Start/Stop
button and the Speed button at the
same time for more than 3 seconds
turns off Wi-Fi. After finishing the
product registration and while WiFi is off, pressing and holding the
Speed button for more than 3
seconds turns on Wi-Fi so that you
can control the product using a
smartphone that has it registered.
Swing Button
It allows you to set the clean booster
to turn left or right.
Indicator Button
You can check the concentration of
the airborne dust by its particle size.
Sleep Timer Button
Use it to schedule the time to turn off
the product.
•• Press and hold it for 3 seconds or
more to lock or unlock the Control
Panel buttons.
15
EN
Status Display Panel
Display of air quality
Icons
1 Overall air quality (color)
2 Dust particle size and dust
concentration (color)
3 Dust concentration or sleep timer
time
4 Smell concentration (color)
Description
It turns on when it is time to replace
the filter.
It turns on when the Wi-Fi function
is activated.
Displays operating mode
It turns on when the sleep timer
function is activated.
Displays speed and booster speed
It turns on when the 'On/Off
Reservation' is set in the LG Smart
ThinQ application.
Speed: Displays the air purifier's
wind strength.
Booster speed: Displays the
clean booster's wind strength.
16
Icon
It turns on when the control panel is
locked.
It turns on when the ionizer turns On.
EN
SMART FUNCTIONS
Using the SmartThinQ
Application
Install the "LG Smart ThinQ" application on
your smartphone to use the product more
conveniently.
Installing SmartThinQ
Find and install ‘LG Smart ThinQ’ from the App
Store/Google Play Store on your smartphone.
For more information on how to use 'LG Smart
ThinQ’, refer to the Help in the app.
Wi-Fi function
Smart diagnosis
When the product malfunctions or fails,
you can check the product conditions
through the smart diagnosis function and
solve issues more conveniently.
Settings
You can configure the product
management and alert settings.
NOTE
•• Wi-Fi only supports 2.4 GHz frequency.
•• When registering the product, make
sure that the Wi-Fi connection of the
smartphone is on.
•• If you can’t register the product by
pressing the product’s Wi-Fi registration
button, press the Wi-Fi registration button
again. If you deleted the registered product
from the app while Wi-Fi is off, the product
registration may not work in one attempt
when you press the Wi-Fi registration
button again to register the product.
•• To turn on the Wi-Fi function that has been
off, press the Wi-Fi registration button
just once and wait. The Wi-Fi connection
will be re-established within 1 minute.
(Pressing the button more than once
initiates the Wi-Fi registration mode.)
•• A wireless router and an Internet
connection cable are separate purchase
items required to use the app and you
need to install them separately.
•• To use the wireless network, you can
contact an Internet service provider or
install the wireless router on your own.
When you install the wireless router on
your own, please refer to the user manual
enclosed with the wireless router.
•• Install the wireless router at a location
close to the product. The strength of
the signal may be different based on
the location and distance between the
product and the wireless router, resulting
in difference in the data transmission time
thereby.
•• The connection may not be established
depending on the network environment. If
you cannot connect to the network or there
is a problem with the network settings,
contact the network administrator or the
Internet service provider.
•• If the security protocol of the router is
set to WEP, you may fail to set up the
network. Please change it to other security
protocols (WPA2 is recommended) and
register the product again.
•• Be sure to use any alphanumeric
combination to set the wireless network
name (SSID), which appears when you
search for Wi-Fi.
•• When you search for a wireless router to
connect to the wireless network, wireless
routers other than the one you are using
may also be found. Using other people's
routers is illegal and, if you do so, you may
be subjected to legal actions. You must
connect to the wireless router authorized
to use the network.
•• The contents of this manual may vary
depending on the version of the "LG Smart
ThinQ" application, and they may be
changed without prior notice.
17
EN
Wireless LAN Module Specifications
Model
LCW-003
Frequency
Range
2412 - 2472 MHz
Output
Power
(max)
IEEE 802.11b: 18.37 dBm
IEEE 802.11g: 17.67 dBm
IEEE 802.11n: 17.67 dBm
Open Source Software License
Notice
Please visit http://opensource.lge.com to
obtain open source codes developed under
GPL, LGPL, MPL or other open source
licenses that are included in this product.
In addition to source codes, you can also
download the contents of all licenses,
copyright indications and indication of no
warranty.
For consideration of the user, this device
should be installed and operated with a
minimum distance of 20 cm between the
device and the body.
If you request open source codes for any
software included in this product by sending
an email to opensource@lge.com within
three years of purchasing the product, we will
send the codes on a CD-ROM with minimal
charges for the CD and shipping.
EU Conformity Notice
Smart Diagnosis function
Hereby, LG Electronics declares that
the radio equipment type Air purifier is in
compliance with Directive 2014/53/EU.
•• This only applies to the models with the
logo.
When the product malfunctions or fails, you
can check the product conditions through the
smart diagnosis function and solve issues
more conveniently by using Smart ThinQ
application.
Wireless function S/W version : V 1.0
The full text of the EU declaration of
conformity is available at the following
internet address:
http://www.lg.com/global/support/cedoc/
cedoc#
LG Electronics European Shared Service
Center B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands.
18
EN
Diagnosis via Wi-Fi
1
2
3
Check the product’s Wi-Fi connection
status.
Select the product for Smart Diagnosis
among the registered products, and
press the menu at the top right area of
the smart-phone screen.
Select Smart Diagnosis on the
smart-phone screen, and press the
Start Smart Diagnosis button.
•• You can check the results of Smart
Diagnosis in the ‘LG SmartThinQ’
app.
If Wi-Fi Diagnosis Fails
•• If the network connection is not smooth,
Smart Diagnosis may fail. Press the Retry
button to try again.
•• If Smart Diagnosis via Wi-Fi keeps failing,
press the Audible Diagnosis button, and
follow the instructions displayed on the
smart-phone screen to perform Audible
Diagnosis.
NOTE
If any problems arise regarding the product
after Smart Diagnosis, you can contact the
Customer Center to find out more on the
details of the diagnosis.
19
EN
MAINTENANCE
CAUTION
•• You must stop operating the product and
unplug it before you clean and replace the
filter.
•• Do not spray water directly on the product.
•• Assemble the product in the reverse order
of disassembly after cleaning the product
and replacing the filter.
•• How to distinguish between the front
and back of the product: There is an LG
logo on the front, while 'PM 1.0 & GAS
SENSOR SYSTEM' is written on the back.
Scheduled Maintenance
Component
Cleaning
Frequency
Replacement
Frequency
Only ultra-fine
filter
Filter
If contaminated,
clean the ultrafine filter with a
vacuum cleaner
or soft brush.
2 months
The whole filter
•• You may also request cleaning or
replacement of the filter to the Service
Center. You will be charged a certain
fee for filter cleaning and replacement
services.
•• If there are no changes to the dust
concentration on the status panel, clean
the sensor regardless of the cleaning
frequency (2 months) of the PM 1.0
sensor. For more information on cleaning
the PM1.0 sensor, please see Cleaning
the Dust Sensor.
Alerts on the Status Panel
When you see an alert message on the
status panel, do the following:
Alert
1 year
Measures
Replace the filter.
NOTE
-
PM 1.0 (super
ultra-fine dust)
sensor
NOTE
•• The operating environment and operation
hours may affect the cleaning frequency.
We recommend that you should clean it
more often in a dusty environment.
•• If you do not clean the product according
to the cleaning frequency, you may
experience a bad odor and poor
performance.
20
•• Filters are sold at the nearest Service
Center or via the Consumables shop on
the LG Electronics site (www.lg.com).
•• Filter replacement alerts appear based
on the maximum usage time, taking into
account the operating hours of the product.
The replacement frequency is determined
by the operating hours and environment.
•• For more information on how to disable a
filter replacement alert, see Replacing the
Filter.
•• A filter is a consumable item. Therefore
you must buy a new one for replacement
when it has reached the end of its lifespan
even during the warranty period.
Quality Label
A
B
C
D
AS60GDWV0
40 W
E
A
(EN) Product Type / (BG) Вид изделие / (CS) Druh výrobku / (DE) Produkttyp / (ES) Tipo de
producto / (FR) Type de produit / (HU) Termék típusa / (IT) Tipo di prodotto / (PL) Typ produktu /
(NO) Prldukttype / (SV) Produkttyp
B
(EN) Model / (BG) Модел / (CS) Model / (DE) Modell / (ES) Modelo / (FR) Modèle / (HU) Modell /
(IT) Modello / (PL) Model / (NO) Modell / (SV) Modell
C
(EN) Rating / (BG) Производителност / (CS) Rozsah / (DE) Stromversorgung / (ES) Valor / (FR)
Tension nominale / (HU) Besorolás / (IT) Potenza / (PL) Wartość znamionowa /
(NO) Vurdering / (SV) Klassificering
D
(EN) Power Input / (BG) Подадена мощност / (CS) Napájení / (DE) Leistungsaufnahme / (ES)
Potencia / (FR) Puissance absorbée / (HU) Bemeneti feszültség / (IT) Alimentazione / (PL) Moc
wejściowa / (NO) Strøminngang / (SV) Strömingång
E
(EN) Made In Korea / (BG) Произведено в Корея / (CS) Vyrobeno v Koreji / (DE) Hergestellt in
Korea / (ES) Fabricado en Corea del Sur / (FR) Fabriqué en Corée / (HU) Made in Korea /
(IT) Prodotto in Corea / (PL) Wyprodukowano w Korei / (NO) Produsert i Korea /
(SV) Tillverkad i Korea
MEMO
MEMO
MEMO
MEMO
MEMO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising