Advertisement
Advertisement
OWNER'S MANUAL AIR PURIFIER Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. EN English BG Български BS Bosanski CS Čeština DA Dansk DE Deutsch EL Ελληνικά ES Español ET Eesti FI Suomi FR Français GA Gaeilge HR Hrvatski HU Magyar IS Íslenska IT Italiano LT Lietuvių LV Latviešu MK Македонски MT Malti NL Nederlands NO Norsk PL Polski PT Português RO Română SK Slovenčina SL Slovenščina SQ Shqip SR Srpski SV Svenska MFL69726858 Rev.00_121818 www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved. TABLE OF CONTENTS This manual may contain images or content different from the model you purchased. This manual is subject to revision by the manufacturer. SAFETY INSTRUCTIONS.............04 SMART FUNCTIONS.....................31 Disposal of waste batteries/accumulators. ...............................................................11 Disposal of your old appliance.............. 11 Using LG SmartThinQ Application........31 Using Smart Diagnosis™......................33 INSTALLATION...............................12 MAINTENANCE..............................35 Parts......................................................12 Removing Packing Materials.................13 Remote Controller.................................14 Transporting or Moving the Appliance...15 Installing the Appliance..........................15 Maintaining the Clean Booster..............36 Cleaning the Exterior.............................36 Cleaning the Filter.................................37 Replacing the Filter................................37 Cleaning the Particles Sensor...............38 Storage .................................................39 OPERATION....................................16 TROUBLESHOOTING ..................40 Appliance Overview...............................16 Getting Started......................................22 Using Smart Mode.................................22 Using Booster Mode..............................23 Using Dual Mode...................................23 Using Single Mode................................24 Adjusting the Air Purifier Fan Speed.....24 Adjusting the Clean Booster Fan Speed.... ...............................................................25 Rotating the Clean Booster...................25 Checking the Air Quality........................26 Using the Air Ionizer..............................29 Setting the Sleep Timer.........................30 Locking the Control Panel Buttons........30 APPLIANCE SPECIFICATIONS...44 SAFETY INSTRUCTIONS EN The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk. WARNING This indicates that the failure to follow the instructions can cause serious injury or death. CAUTION This indicates that the failure to follow the instructions can cause the minor injury or damage to the product. IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following: Children in the Household This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 04 EN For use in Europe This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Installation •• Do not install the appliance on an uneven or inclined surface. •• Do not install the appliance in an area exposed to direct sunlight or near heat-generating equipment. •• Do not install the product in a place where combustible gas may leak or industrial oil or metallic particulates are present. •• Be careful not to let the power plug pressed by the back of the appliance. •• Do not touch the power plug with wet hands. •• Make the connection securely so that screw in terminals may not be loosed when pulling cable. •• When unplugging the power cord, always pull it by the plug. •• Unplug the appliance during thunder or lightning or when not in use for a long time. •• Do not bend the power cable excessively or place a heavy object on top of it. •• Do not extend the length of the power cable or alter it. •• Do not use several devices on a multi-socket extension outlet. 05 EN •• Take care to ensure that power cable could not be pulled out or damaged during operation. •• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. Operation •• If the appliance is immersed in water, stop using it and contact the LG Electronics service centre. •• If there is a gas leakage (isobutane, propane, LNG, etc.), do not touch the product or power plug and ventilate the area immediately. •• Do not clean the appliance with brushes, cloths or sponges with rough surfaces or which are made of metallic material. •• If you detect any abnormal noise, odour or smoke, unplug the product immediately and contact an LG Electronics service centre. •• Only an authorized repair person from LG Electronics service centre should disassemble, repair, or modify the appliance. •• Do not use or store fire, combustibles (ether, benzene, alcohol, drugs, propane, butane, combustible spray, insecticide, air freshener, cosmetics etc.) or flammable materials (candles, lamps etc.) near the product. •• Do not place the power cord under rugs, carpeting or mats. •• Do not allow animals or pets to chew on the power cord. •• Do not allow children to climb on or play with the appliance. •• Do not move the appliance when it is in operation. •• The fan is not a toy. It should not be played with or placed where young children can reach it. 06 EN •• Do not impact the appliance. •• Do not place anything(coffee, flower vase or drinks etc.) on top of the appliance. •• Do not insert hands or metal objects into the air inlet or outlet. •• Do not install and use broken parts. •• Do not put flammables into the appliance. •• Do not operate the appliance while its cover is open. Maintenance •• Dispose of the packing materials (vinyl, styrofoam etc.) to keep them out of reach of children. •• Be careful not to allow any part of your body to be pinched when you detach and reattach parts of the appliance. •• You must stop operating the product and unplug the appliance before you clean the appliance and replace the filter. Battery •• A button/coin-shaped battery is used in the remote controller of the appliance. If you accidentally swallowed the battery, go to the doctor immediately for emergency treatment. If you fail to receive first aid within 2 hours after you swallowed it, you may experience damage to your internal organs or death in severe cases. •• Do not swallow the battery. •• If the battery tray is not secured firmly, stop using the appliance instantly and keep it away from children. •• Replace the all batteries in the remote controller with new ones of the same type. Do not mix old and new batteries or different types of batteries. 07 EN CAUTION To reduce the risk of minor injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: Installation •• Do not tilt the appliance to pull or push it when transporting. •• Do not install the appliance in transportation equipment (vehicle/vessel etc.). •• Do not place the appliance near a TV or a stereo equipment. •• Do not place the appliance under bright light. •• The appliance shall be installed in accordance with national wiring regulations. •• When moving or storing the appliance, wrap the power cord around the base of the appliance to prevent personal injury, damage to the cord or damage to floors. Operation •• Do not use the product for removal of toxic gas such as carbon monoxide. •• Do not use the product for ventilation purposes. •• Do not use the appliance for a long time in a region with unstable voltage. •• Do not place obstacles around the air inlet or outlet. •• For safe use of the appliance, children or others with reduced mental capabilities need to be closely monitored by a person who is responsible for their safety. •• Do not place the appliance near curtains. 08 EN •• Do not use the product for special purposes such as preserving plants, precision instrument, artworks etc. •• Do not climb or place objects on top of the appliance. •• Do not operate the appliance with wet hands. •• Do not let the moisture from the humidifier directly touch the appliance. •• Do not use the appliance while it is not in upright position. •• Do not use the appliance near objects vulnerable to heat. •• Use the filter only for its intended purpose. •• The Deodorizing Care Filter and Allergen Collection Care Filter are assembled together. Do not try to detach them from each other. •• Do not use detergents, cosmetics, chemicals, air fresheners, or disinfectants in the appliance. •• Do not place magnetic or metal objects on top of the appliance. •• Do not touch any internal parts while the unit is operating or immediately after operation. •• Do not operate the Booster arbitrarily. •• Do not insert any objects into the Booster. •• Do not operate the product while the Booster cover and grill are separated. •• Do not insert hands or metal objects into the moving part of the Clean Booster. •• Do not press multiple buttons at the same time on the remote controller. •• Do not kick or step on the remote controller. 09 EN •• Do not use the remote controller where there is too much water or moisture. •• Do not use the remote controller where there is fire or heat. Maintenance •• Do not clean with strong detergents of solvent types, but use soft cloth. •• Do not disassemble the clean booster arbitrarily. •• Do not clean the appliance with an alkaline detergent. •• Do not wipe the appliance surface using sulfuric acid, hydrochloric acid or organic solvent (thinner, kerosene etc.) or attach a sticker on the appliance. •• Do not allow the water enter inside the appliance. •• Do not wash the filter with water. •• Be careful not to damage the ultra fine filter when you use a vacuum cleaner. Battery •• Do not modify the battery arbitrarily. •• Misplaced battery may cause an explosion. •• Do not recharge or take apart the battery. •• Do not throw the battery in the fire for disposal or leave it near the heat. •• Remove and store the battery in a safe location if you don't intend to use the remote controller for a long time. 10 EN Disposal of waste batteries/accumulators •• This symbol may be combined with chemical symbols for mercury (Hg), cadmium (Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead. •• All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. •• The correct disposal of your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health. The correct disposal of Your old batteries/ accumulators will help to prevent potential negative consequences for the environment, animal and human health. •• For more detailed information about disposal of your old batteries/ accumulators, please contact your city office, waste disposal service or the shop where you purchased the product. (http://www.lg.com/ global/sustainability/environment/take-back-recycling/global-networkeurope) Disposal of your old appliance •• This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream. •• Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products, and other valuable materials that can be recycled to conserve limited resources. •• You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/ recycling. 11 EN INSTALLATION Parts Air Purifier Owner’s Manual Remote Controller / Battery (CR2025, 1 Unit) Owner’s Manual •• The appearance or components of the appliance may differ depending on the model. •• The shape of the power plug differs depending on the country. 12 EN Removing Packing Materials 4 •• Upper filter inlet: 1 support Unpack the appliance and remove any packing tape or vinyl before using the appliance. 1 2 •• Lower filter inlet: 1 support Pull out the appliance from the packaging and remove the fixing tape attached on the appliance. Support Grab the top end of the back cover and gently pull it. •• You will see "PM1.0 & GAS SENSOR SYSTEM" on the back cover of the appliance. 3 Remove the support located at the filter inlet. Remove the cover from the appliance. 5 6 Remove the filter and its vinyl. Install the filter in the appliance. •• Make sure that the handle faces upward. Handle 13 EN 7 8 9 Insert the fixing parts at the bottom of the cover into the holes at the bottom of the appliance before you close the cover. Remove the vinyl from the filter at the lower part of the appliance in the same way. Remote Controller Inserting Battery 1 With the backside of the remote controller facing up, remove the battery tray from the remote controller. 2 Insert the battery provided with the appliance to the tray. •• The (+) electrode of the battery must face upward. Assemble the appliance in the reverse order of disassembly after cleaning the appliance and replacing the filter. CAUTION •• Failure to remove the supports may affect the performance of the appliance. Please be sure to remove it before use. 3 Insert the battery tray to the remote controller. •• Make sure that you remove the filter’s vinyl prior to use otherwise it may result in appliance malfunction. Back •• Pay attention to the direction of the filter when you install the filter otherwise it may cause malfunction or failure of the appliance. NOTE •• If the battery runs out of charge, replace it with a new one (CR2025). •• If the remote controller does not work as expected, try to replace the battery or check the polarity (+, -) of the battery. If the problem continues, contact the Service Centre. •• Dispose of the used battery according to the environmental regulations. 14 EN Transporting or Moving the Appliance Transport the appliance in a well-secured and upright position. Impacts may cause appliance damage. The appliance is heavy. Use two people when moving it. •• Dropping the appliance may cause personal injury or appliance malfunction. •• Do not hold the outer cover when you carry the appliance. The cover may open accidentally, causing the appliance to drop. When moving or storing the appliance, wrap the power cord around the base of the appliance to prevent personal injury, damage to the cord or damage to floors. Installing the Appliance Install the appliance on a strong level surface. Installing the appliance on a weak or tilted surface may cause noise and vibration or tipping, resulting in injury. Allow a 1 m clearance between the appliance and surrounding surfaces or objects. The air inlet needs space to function properly. 1m Do not install the appliance near curtains which could block the air inlet or outlet. Doing so may result in appliance malfunction or failure. The performance of the appliance may differ depending on the operating environment (such as temperature and humidity). •• 40–70 % of humidity is recommended for optimal performance. % 15 EN OPERATION Appliance Overview Front View Clean booster Upper part of the air purifier Lower part of the air purifier Upper air outlet/Clean booster Lower air inlet (bottom cover) •• It discharges purified air through the upper filter. Air goes into the lower part of the air purifier through the inlet. You may remove the front or rear cover separately. •• You can control the direction of the air so that it reaches every corner of the room. Light of air quality It displays the overall air quality using a colored light. Upper air inlet (top cover) Air goes into the upper part of the air purifier through the inlet. You may remove the front or rear cover separately. Lower air outlet It discharges purified air through the lower filter. Status display panel Use it to check the settings of the appliance and the air quality. Control Panel Use it to set the appliance functions. Receiver for Remote controller Signal Air Ionizer •• It generates negative ions and minimizes harmful bacteria in the air. •• It is built in the lower part of the air purifier. •• The appearance or components of the appliance may differ depending on the model. 16 EN Back View Smart Diagnosis Part Odour (Gas) Sensor In the event of a malfunction or failure, you can use the Smart Diagnosis option to check the appliance condition. It detects a odour (gas). PM1.0 (particles with a diameter between 1.0 and 2.5 micrometers) Sensor Filter It minimizes allergic materials, fine particles, possible sources of sick house syndrome, smog and other odour. It detects the concentration of particles. 17 EN Filter System Deodorizing Care Filter It minimizes harmful odour (gas) that are generated in everyday life such as bathroom smell, cigarette smoke (smell) and food smell. Allergen Collection Care Filter It minimizes PM1.0 and cigarette smoke from the air. Ultra-fine Filter It is attached on the exterior of the Allergen Collection Care Filter, primarily minimizing large particles floating in the air, including pet hair. Filter Handle Use it to separate the filter from the appliance. NOTE •• Keep the windows or doors closed while using the product. However, if you operate the product for a long time in a closed space, carbon dioxide concentration may rise. So be sure to ventilate the indoor air regularly. •• Carbon monoxide (CO) is a harmful gas that is mainly introduced from outside and cannot be removed with a filter. •• The deodorization function of the air purifier operates by trapping the odour (gas) in the filter. If you use the product for a long time in a room with excessive odour, the performance of the filter may drop significantly. The Deodorizing Care Filter may sometimes become the source of excessive odour if used for a long time in a room with excessive odour. •• If excessive odour is present in the room, first ventilate the indoor air to remove the odour. Then use the air purifier to minimize the remaining odour. •• Do not throw the filter or use it for other purposes. 18 EN Control Panel Start/Stop Button Booster Speed Button You can start or stop the operation. It allows you to adjust the air flow of the clean booster. Mode Button •• Press and hold it for 3 seconds or more to turn on or off the air ionizer. Use it to set the operation mode. •• Press and hold the button for 3 seconds or more to turn on/off the Light of air quality. Speed Button It allows you to adjust the air flow of the product. •• Press and hold the button for more than 3 seconds to activate the WiFi registration mode. •• Buttons to turn Wi-Fi off Pressing and holding the Start/ Stop button and the Speed button at the same time for more than 3 seconds turns off Wi-Fi. After finishing the appliance registration and while Wi-Fi is off, pressing and holding the Speed button for more than 3 seconds turns on Wi-Fi so that you can control the appliance using a smartphone that has it registered. Swing Button It allows you to set the clean booster to turn left or right. Indicator Button You can check the concentration of the particulate matter by its particle size. Sleep Timer Button Use it to schedule the time to turn off the appliance. •• Press and hold it for 3 seconds or more to lock or unlock the Control Panel buttons. 19 EN Status Display Panel Display of air quality ① Overall air quality (color) ② Particulate matter (color) ③ Concentration of particles or sleep timer time ④ Concentration of odour (color) Displays operating mode Displays speed and booster speed Speed: Displays the air purifier's air flow. Booster Speed: Displays the clean booster's air flow. Icons Icon Description It turns on when it is time to replace the upper filter. It turns on when it is time to replace the lower filter. It turns on when the Wi-Fi function is activated. It turns on when the sleep timer function is activated. It turns on when the reservation for turning on/off the appliance is set in the SmartThinQ application. It turns on when the control panel is locked. It turns on when the air ionizer turns on. 20 EN Using Remote Controller NOTE •• To use the remote controller, direct the signal sending area of the remote controller toward the signal reception area of the appliance. •• If you are away from the appliance (front) by more than 7 m, the remote controller may not work. •• If the remote controller does not work even after replacing the battery, contact the nearest service centre. •• The remote controller may not work properly where there is a strong light, such as those from a 3-wavelength fluorescent lamp or a neon sign. Start/Stop Button You can start or stop the operation. •• If you lost the remote controller, you can purchase a new one in a nearby service centre. Speed Button It allows you to adjust the air flow of the product. Sleep Timer Button Use it to schedule the time to turn off the appliance. Booster Speed Button It allows you to adjust the air flow of the clean booster. Light Button Use it to turn on or off the Light of air quality. Mode Button Use it to set the operation mode. Swing Button It allows you to set the clean booster to turn left or right. 21 EN Getting Started Using Smart Mode Press the Start/Stop button to start the operation. It automatically controls the operation mode and air flow based on the overall air quality. Press Mode button to choose Smart mode. •• Each time you press the button, the operation mode changes in the following order: Smart → Booster → Dual → Single. NOTE •• If you operate the product for the first time, it enters Booster mode. •• If you stop and resume the operation, it starts cleaning with the mode you selected last time. Even if power is lost due to a blackout, the appliance remembers the mode you used last time. •• Once the operation starts, the sensor stabilizes (for approx. 30 seconds) before the particles concentration is displayed. During the sensor stabilization period, you will see (ready) on the status display panel. You can specify the sensor stabilization time in the 'Air quality sensor start time' option in the LG SmartThinQ application. –– 'Always operate': You can check the air quality even when the product is not operated. –– 'Operate only during the operation': You can check the air quality only when the product is operating. 22 NOTE •• While in Smart mode, the Speed, Booster Speed and Swing buttons do not work. •• Smart mode operates either the clean booster, upper part of the air purifier or lower part of the air purifier to adapt to the air quality. EN Using Booster Mode Using Dual Mode The clean booster cleans the air and quickly sends it to a long distances to circulate the indoor air. It uses both the upper part and lower part of the air purifier simultaneously to quickly clean the indoor air. Press the Mode button to choose Booster mode. Press the Mode button to choose Dual mode. •• Each time you press the button, the operation mode changes in the following order: Smart → Booster → Dual → Single. •• Each time you press the button, the operation mode changes in the following order: Smart → Booster → Dual → Single. NOTE •• If you choose Booster mode, the clean booster rises at the 55° and pushes the air forward to circulate the indoor air. •• If you happen to unplug the power cord from the outlet before the Clean Booster closes completely, plug in the cord again. The Clean Booster will swing left and right and then close completely. 23 EN Using Single Mode It cleans the indoor air using the lower part of the air purifier. Press the Mode button to choose Single mode. •• Each time you press the button, the operation mode changes in the following order: Smart → Booster → Dual → Single. NOTE The upper part of the air purifier runs with gentle wind for optimal performance. Adjusting the Air Purifier Fan Speed You can adjust the air flow of the air purifier. Press the Speed button during the operation. •• Each time you press the button, the speed changes in the following order: Auto → Low → Middle → High → Turbo. Displaying Air Purifier Speed If you adjust the speed, it is displayed on the status display panel. It increases by 2 grids at a time. [Example of Air Purifier Speed 'Middle'] NOTE •• The speed is set to Auto when you first start the operation. Auto mode controls the wind speed automatically according to the contamination level of the indoor air. •• You can control the wind speed only in the Booster, Dual, and Single modes. 24 EN Adjusting the Clean Booster Fan Speed Rotating the Clean Booster You can adjust the air flow of the clean booster. While in Booster mode, press the Swing button. The clean booster rotates left and right. While in Booster mode, press the Booster Speed button. •• Each time you press the button, the speed changes in the following order: Auto → Low → Middle → High → Turbo. NOTE •• The rotating angle of the clean booster is 35°. Displaying Booster Speed •• You may use the clean booster rotation function only in Booster mode. In the other modes, you will hear a warning sound and won't be able to control the function. If you adjust the booster fan speed, it is displayed on the status display panel. It increases by 2 grids at a time. [Example of Booster Speed 'Middle'] NOTE •• If you choose Auto, the fan inside the clean booster is adjusted according to the speed of the air purifier. For example, if you change the speed of the air purifier to 'Low', the booster fan speed is changed to 'Low' as well. •• You may control the booster fan speed only in Booster mode. In the other modes, you will hear a warning sound and won't be able to control the function. 25 EN Checking the Air Quality You can check the cleanliness of the indoor air by looking at the Light of air quality and the status display panel. Understanding the Overall Air Quality The overall air quality is calculated based on the particles and odour (gas) concentrations and is categorized into 4 levels including green, yellow, orange or red depending on the contamination of the air. Overall Air Quality Concentration of PM (μg/m3) Concentration of odour State PM10 (coarse particles) PM2.5 (fine particles) PM1.0 (particles with a diameter between 1.0 and 2.5 µm) State Level Red Poor 255 or more 56 or more 56 or more Very strong 4 Orange Unhealthy 155~254 36~55 36~55 Strong 3 Yellow Moderate 55~154 13~35 13~35 Normal 2 Green Good 54 or less 12 or less 12 or less Weak 1 Color NOTE •• The color of overall air quality is determined based on whichever is worse between the particles concentration and odour (gas) concentration. •• PM (particulate matter) concentration is displayed in increments of 1 unit, from 8 to 999. PM concentration values are based on the data sheet provided by the sensor manufacturer. –– Differences in PM concentration values may be the result of different methods of measuring or differences in the actual PM concentration levels. –– The PM concentration measurement was tested using LG Electronics’ standard test materials. •• The overall air quality level is a result of both PM concentration and the odour level. It may differ from the PM10, PM2.5 and PM1.0 concentration levels. 26 EN Checking the Air Quality Using the Light of air quality Turning on/off the Light of air quality Four different colors are used to indicate the overall air quality based on the particles concentration and odour (gas) concentration. You can press and hold the Mode button for 3 seconds or more to turn it on/off. Upper Light of air quality Lower Light of air quality NOTE The Light of air quality turns on white for the sensor stabilization period (30 seconds). The odour (gas) sensor is stabilized 2 minutes after you start the operation. During this period, the odour (gas) concentration is not reflected in the overall air quality. NOTE •• When the sleep timer is set, the Light of air quality turns off. •• If you turn on the Light of air quality after setting the sleep timer, you will see the overall air quality on the status display panel as well as on the Light of air quality. 27 EN Checking Air Quality on the Status display panel You may check the overall air quality, particles concentration, and odour concentration on the status display panel. •• Overall air quality: You can check the color (overall air quality) on the status display panel to determine the overall air quality. •• Particles concentration: You can check the particles concentration by looking at the particles concentration value and the particle size indicator color. It shows the worst status among the PM10 / PM2.5 / PM1.0. –– If the particles concentrations of all categories are 'good', the concentration of the 'PM10' is displayed. –– If it is worse than 'moderate', the color and concentration of the particles with the highest contamination level are displayed. If they share the same contamination level, the contamination level is displayed according to the following order: PM1.0, PM2.5 and PM10. •• Odour concentration: You can check the color (odour concentration) on the status display panel to determine the odour concentration. [Example of the Display Showing Air Quality] Overall air quality Particulate matter color Concentration of odour color Concentration of particles 28 The above picture displays PM10/PM2.5/ PM1.0, meaning that the concentration of particles with a diameter between 1.0 and 2.5 micrometers is higher than those of coarse particles and fine particles. While the color of the particulates matter is solely determined based on the particles concentration and the color of the (odour concentration) is solely determined based on the odour concentration, the color of the (overall air quality) is determined based on the worse cause between the particles and odour. If the odour is 'normal' and the PM1.0 concentration is 50 μg/m3, which is 'unhealthy', the overall air quality is displayed in orange as the worst cause is the particles. On the other hand, if the odour is 'very strong', the overall air quality is displayed in red because the odour becomes the worst cause. Checking the Particles Concentration You can check the particulate matter concentration by its particle size. Press the Indicator button during the operation. •• Whenever you press the button, the display changes in the following order: PM10 → PM2.5 → PM1.0. •• The concentration of the selected particles is displayed for about 10 seconds. EN NOTE •• The overall air quality level is a result of both PM concentration and the odour level. It may differ from the PM10, PM2.5 and PM1.0 concentration levels. •• Even two products placed in the same space could measure the concentration of particles differently due to air circulation. Using the Air Ionizer To generate ions to minimize various bacteria from the air. Press the Booster Speed button for more than 3 seconds while operating. •• (Air ionizer) is displayed on the status display. •• The chemicals contained in air fresheners, perfumes, deodorizers or cosmetics may affect the overall air quality display. •• The particles concentration displayed may change with environmental factors such as the presence of sofas, beds, carpets, vacuum cleaners, humidity, smoke, bugs, pets or cooking oils. •• The PM concentration may be affected by changes in the outside environment such as construction, heavy traffic or pollen. The micro particles concentration could be higher near outside doors, windows, vents or in areas where outside air enters. •• Use ONLY water to clean the sensor. Using anything else could cause appliance failure. •• The concentration of particles could be affected by cooking or using humidifiers, sprays or other products which generate steam or fine particles. NOTE •• When the operation is stopped, the air ionizer function can not be used. •• The air ionizer function is available in all operating modes. 29 EN Setting the Sleep Timer You can set the appliance to stop automatically after running for the duration you set. Press the Sleep Timer button during the operation. •• Each time you press the button, the Sleep Timer changes in the following order: After 2 hours→ After 4 hours → After 8 hours → After 12 hours → Cancel. •• Once the sleep timer is set, the status display panel displays only the sleep timer icon except for a few other icons. Locking the Control Panel Buttons You can lock the buttons on the Control Panel to prevent the appliance from operating due to unforeseen reasons, such as a child manipulating the buttons. Press the Sleep Timer button for at least 3 seconds during the operation. •• (Lock) is displayed on the status display panel. NOTE NOTE •• For your deep sleep, the speed is set to Low by default for a certain period of time. After the time passes, the speed is controlled automatically depending on the air quality. •• Even when the sleep timer is set, you can still change the speed by pressing the Speed button. •• If you press the Sleep Timer button once more while the sleep timer is set, you can check the preset time and press the button repeatedly to cancel the sleep timer. •• The sleep timer remains on even if the power goes off or if there is a blackout. 30 •• You can turn off the lock function in the same way as turning it on. •• The control panel can be locked even when the appliance is not operated. •• If you pull out the power plug in lock set status, the lock function is cleared. EN SMART FUNCTIONS Using LG SmartThinQ Application NOTE The LG SmartThinQ application allows you to communicate with the appliance using a smartphone. •• The appliance supports 2.4 GHz WiFi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual. Before Using LG SmartThinQ 1 Check the distance between the appliance and the wireless router (WiFi network). •• If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail. 2 Turn off the Mobile data or Cellular Data on your smartphone. •• For iPhones, turn data off by going to Settings → Cellular → Cellular Data. •• To verify the Wi-Fi connection, check that Wi-Fi icon on the control panel is lit. •• LG SmartThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection. •• If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength. •• The Wi-Fi connection may not connect or may be interrupted because of the home network environment. •• The network connection may not work properly depending on the Internet service provider. •• The surrounding wireless environment can make the wireless network service run slowly. •• The appliance cannot be registered due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again. 3 Connect your smartphone to the wireless router. •• If the firewall on your wireless router is enabled, disable the firewall or add an exception to it. •• The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.) •• Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer. 31 EN •• If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again. Installing LG SmartThinQ Search for the LG SmartThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application. Wi-Fi Function Smart Diagnosis™ When the appliance malfunctions or fails, you can check the appliance conditions through the smart diagnosis function and solve issues more conveniently. Settings You can configure the appliance management and alert settings. NOTE •• If you change your wireless router, Internet service provider, or password, delete the registered appliance from the LG SmartThinQ application and register it again. •• The application is subject to change for appliance improvement purposes without notice to users. •• Functions may vary by model. 32 Wireless LAN Module Specifications Model LCW-003 Frequency Range 2412 - 2472 MHz Output Power (Max) IEEE 802.11b: 18.37 dBm IEEE 802.11g: 17.67 dBm IEEE 802.11n: 17.67 dBm Wireless function S/W version : V 1.0 For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. EU Conformity Notice Hereby, LG Electronics declares that the radio equipment type Air Purifier is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/ cedoc# LG Electronics European Shared Service Centre B.V. Krijgsman 1 1186 DM Amstelveen The Netherlands EN Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information. Using Smart Diagnosis™ •• For appliances with the logo. Smart Diagnosis™ Through the Customer Information Centre Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails. Use this function only to contact the service representative, not during normal operation. Smart Diagnosis™ can not be activated unless the appliance is connected to power. 1 Open the LG SmartThinQ application on the smart phone. 2 Press Smart Diagnosis button. 3 Follow the instructions on the smart phone. 4 Press and hold the Indicator button for 5 seconds or more to execute the Smart Diagnosis function. 33 EN 5 Place the phone near the appliance. •• The microphone on your phone should face the Smart Diagnosis ( ) logo on the back. Do not remove the phone from the appliance while data is being transmitted. •• You need to keep the phone near the appliance while the data is being transmitted for Smart Diagnosis. •• The data transfer sound may be harsh to the ear while the smart diagnosis data is being transmitted but do not take the phone off the appliance for accurate diagnosis until the data transfer sound has stopped. 6 After the data transfer is complete, the service agent will explain the result of the Smart Diagnosis™. •• After the service agent explains the diagnosis result, take the recommended measures. 34 NOTE •• The Smart Diagnosis™ function depends on the local call quality. •• The communication performance will improve and you can receive better service if you use the home phone. •• The diagnosis data transmission may not be smooth due to poor communication quality, in that case, the smart diagnosis service may not be provided properly. EN MAINTENANCE WARNING •• You must stop operating the appliance and unplug it before you clean and replace the filter. •• If there are no changes to the particles concentration on the status display panel, clean the sensor regardless of the cleaning frequency (2 months) of the PM1.0 sensor. •• Do not spray water directly on the appliance. Scheduled Maintenance Component Cleaning Frequency Replacement Frequency Only ultra-fine filter Filter If contaminated, clean the ultrafine filter with a vacuum cleaner or soft brush. •• You may also request cleaning or replacement of the filter to the Service Centre. You will be charged a certain fee for filter cleaning and replacement services. The whole filter 1 year Alerts on the Status display panel When you see an alert message on the status display panel, do the following: Alert Measures Replace the upper filter. Replace the lower filter. 2 months - NOTE PM1.0 sensor NOTE •• The operating environment and operation hours may affect the cleaning frequency. We recommend that you should clean it more often in a dusty environment. Filter replacement alerts appear based on the maximum usage time, taking into account the operating hours of the product. The replacement frequency is determined by the operating hours and environment. •• If you do not clean the product according to the cleaning frequency, you may experience a bad odour and poor performance. •• A filter is a consumable item. Therefore you must buy a new one for replacement when it has reached the end of its lifespan even during the warranty period. Contact the LG Electronics Service Centre or Consumables shop on the LG Electronics site (www.lg.com). 35 EN Maintaining the Clean Booster Cleaning the Exterior 1 If the clean booster cover comes apart, secure it by aligning the 3 hooks with the slots before you use the product. Remove dust from the air inlet and outlet using a vacuum cleaner. CAUTION •• Do not disassemble the clean booster arbitrarily. •• Do not unscrew the 2 screws fixing the clean booster grille on the back while the product is running. 2 Wipe the exterior with soft cloth. NOTE If you find it difficult to clean the front and rear covers, separate them first and wash with water. Then, dry them completely under the shade. 36 EN Cleaning the Filter Replacing the Filter 1 Separate the cover from the appliance. 1 2 Remove dust from the ultra-fine filter with a vacuum cleaner or soft brush. Remove the cover and replace the filter. •• To avoid polluting the surroundings when replacing the filter, place a newspaper on the floor before you remove the filter. 2 Once you have replaced the filter, disable the filter replacement alert. Disabling an Upper Filter Replacement Alert Press and hold the Speed and Indicator buttons simultaneously for 3 seconds or more. •• The (Upper Filter Replacement Alert) is disabled and the replacement alarm is reset. 37 EN Disabling a Lower Filter Replacement Alert Press and hold the Indicator and Sleep Timer buttons simultaneously for 3 seconds or more. •• The (Lower Filter Replacement Alert) is disabled and the replacement alarm is reset. Cleaning the Particles Sensor PM1.0 sensor detects the fine particles as well as coarse particles. Therefore, you need to clean its lens regularly. 1 Remove the rear cover from the appliance. 2 Open the sensor cover. 3 Clean the lens with the cotton swab soaked with water and clean it again with a dry cotton swab. NOTE The filter replacement alert is disabled automatically if 24 hours have passed since it was displayed or if the product is disconnected from the power source. 38 EN 4 Close the sensor cover. Storage If the appliance is not used for a long period of time, store it at a shaded and dry place. 1 Operate the product in Dual mode for one hour or more on a fine day. •• This removes the moisture and prevents molds from building up inside the product. 2 Turn off the power and unplug it from the electrical outlet. •• Wind the power cord around the bottom of the appliance. 3 NOTE Do not wipe the sensor with material other than water. It may cause a appliance failure. Package the appliance to prevent the dust or foreign substance from entering the appliance. Store the packaged appliance at a shaded place. CAUTION Do not store the appliance at a humid place or at a place exposed to the direct sunlight. Otherwise the appliance may be deformed, malfunction or generate odour. 39 EN TROUBLESHOOTING If a failure occurs in the appliance, check the following before contacting the Service Centre. Symptoms The appliance does not operate. Fan is noisy even on the lowest speed. The indoor air is not purified well enough. There is a odour, but the Light of air quality does not change. 40 Cause Solution Is the power plug unplugged from the outlet? •• Plug it into the outlet properly. Did dust accumulate in the ultra fine filter? •• Clean the ultra fine filter properly. Did dust accumulate in the Allergen Collection Care Filter? •• Replace the whole filter. Is the indoor contamination severe? •• Ventilate the indoor air before you use the product. Did dust accumulate in the ultra fine filter? •• Clean the ultra fine filter properly. Did dust accumulate in the Allergen Collection Care Filter? •• Replace the filter. Are you using it in a place that is too spacious or too open? •• Use a product that fits the size of the room. •• Avoid a well-ventilated place such as a gate, window, etc. Is there any obstacle nearby? •• Remove the obstacle. Is the appliance installed at a corner? •• Move the appliance and install it again. Is the Light of air quality turned on red or orange? •• The color of overall air quality is determined based on whichever is worse between the particles concentration and odour (gas) concentration. Check if the particles concentration is worse than before. •• The Odour(gas) sensor is designed to detect harmful gases. Strong food odours may not register as harmful, but the Deodorizing Care Filter will minimize them. EN Symptoms The Light of air quality continues to stay red. The buttons on the control panel do not work. The concentration of the particles does not change. The concentration of particles continues to remain high. Cause Doesn’t the color change even if it is moved to a clean room? Solution •• If the amount of the odour is more than the capacity of the product, the display may not change. •• Clean the sensor area. •• Remove the power plug from the outlet and reconnect it one minute later. Did you use a spray near the product? •• Do not use a spray near the product. Is the (Lock) turned on on the status display panel? •• Press and hold the Sleep Timer button for 3 sec. or longer to disable the lock function. Is there a foreign substance on the sensor? •• Clean the PM1.0 sensor. Is the product used in a closed space? •• In a closed space, the cleanliness level may continue to stay the same without change. Does the air continue to flow in from the outside to the location where the product is installed? •• In an environment where outside air is supplied continuously, the concentration may continue to remain high. The overall air quality color does not match the particles concentration value. Does the color of the overall air quality match the color that indicates the odour concentration? The appliance makes a sudden loud noise while operating. Is the operation mode set to Smart mode or Speed is set to Auto mode? •• The overall air quality is displayed by evaluating the odour and particles concentration comprehensively. •• Even if the particles concentration is low, if the odour is strong, the overall air quality color may not match the particles concentration value. •• It may make a sudden noise as it automatically adjusts the air flow depending on indoor air quality. 41 EN Symptoms A strange odour comes out from the air outlet as well as the filter. Cause Did you purchase the appliance lately? •• The odour of activated charcoal is not harmful. This is similar to the odour you may experience in a brand new car. We assure it will go way 1-2 weeks after its first use. Is the product used at a place with a lot of smoke or odour? •• In a place with a lot of smoke or odour, the air cleaning function may deteriorate. Ventilate the room first and then use the product. Does the filter have a bad odour? •• Replace the filter. The filter replacement frequency may differ depending on the usage environment. Is the product installed in an environment where a lot of odour occurs? The clean booster is not working. A noise is generated when I start or stop the clean booster. The Light of air quality is not illuminated. 42 Solution Is the operation mode set to the Clean Booster mode? •• If you use the product for a long period of time while you cook or broil fish/meat, the filter lifespan may be rapidly decreased. •• If possible, open the window for ventilation while cooking, and use the product to minimize the odour left after the ventilation. •• The booster fan speed and booster fan rotation functions work only in the Clean Booster mode. - •• It means that the clean booster is trying to look for the correct location. - •• Check if the light of air quality is turned off. Is the Sleep Timer set? •• The light of air quality is turned off when the sleep timer function is activated. EN Symptoms There is no air coming out for the upper air outlet. I can't connect to the appliance in the LG SmartThinQ app. I can't register the appliance in the LG SmartThinQ app. The particles concentration levels are different between the appliance and the LG SmartThinQ app. Cause Solution Is the operation mode set to the Single mode? •• The upper part of air purifier does not operate when the appliance is operating in Single mode. Is the operation mode set to the Smart mode? •• The upper part of air purifier may not operate depending on indoor air quality. - •• Check if the vinyl of the filter has been removed. Is the power plug unplugged from the outlet? Is the wireless router connected with the appliance not working? •• Plug in the power cord of the appliance. •• Power off the wireless router and on again. •• Check if there is an Internet connection problem with the router. Is the appliance too far away from the wireless router? •• Move the wireless router near the appliance. Is your wireless router working properly? •• Some carriers provide routers that are available to their members only. If you have an outdated model, contact your carrier to have it replaced with a newer one. Are you looking at the same particles? •• Make sure that the levels of the PM1.0/PM2.5/PM10 are displayed consistently between the LG SmartThinQ app and your appliance. •• The difference in the values could be caused by the difference in update time between the LG SmartThinQ app and the appliance. 43 APPLIANCE SPECIFICATIONS EN Height Depth Width The external appearance and dimensions of the appliance are subject to change without prior notice. Model AS95GD Series Power 220–240 V~ 50 / 60 Hz Exterior dimensions (Width X Height X Depth) 44 When the clean booster is not running: 373 mm x 1073 mm x 373 mm When the clean booster is running: 373 mm x 1310 mm x 373 mm ">

Public link updated
The public link to your chat has been updated.
Advertisement