advertisement
OWNER’S MANUAL
Mini Hi-Fi
System
Please read this manual carefully before operating your set and retain it for future reference.
MODEL
CK43 (CKS43F)
MFL70382765
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
1807_Rev02
1 Getting Started
1
2
Getting Started
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION:
The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
WARNING:
Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION:
Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
CAUTION:
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.
The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
NOTICE
: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product.
Getting Started
3
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily
accessible.
Check the specification page of this owner’s manual to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.
This device is equipped with a portable battery or accumulator.
How to Safely remove the batteries or the battery pack from the equipment:
To Remove the old batteries or battery pack, follow the assembly steps in reverse order. To prevent contamination of the environment and bring on possible threat to human and/or animal health, the old batteries or the battery pack must be put in an appropriate container at designated collection points.
Do not dispose of batteries or battery pack together with other waste. It is recommended that you use local, free reimbursement systems batteries or battery packs, (may not be available in your area). The batteries or the battery pack should not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION:
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
1
4
Table of Contents
Table of Contents
1 Getting Started
12 Rear Panel
2 Connecting
14 – Attaching the speakers to the unit
15 Optional Equipment Connection
15 – Listening to music from your external device
3 Operating
18 – Selecting a folder and an MP3/WMA file
19 – Deleting a file/folder or format
19 – AUTO DJ
20 Using a BLUETOOTH® wireless technology
20 – Listening to music stored on the Bluetooth
devices
23 Using the Music Flow Bluetooth App
23 – About “Music Flow Bluetooth” App
23 – Install “Music Flow Bluetooth” App onto
25 – Improving poor FM reception
25 – Presetting the Radio Stations
25 – Deleting all the saved stations
Table of Contents
5
30 – Turn off the sound temporarily
33 – Setting the Clock through
33 – Using your player as an alarm clock
35 WIRELESS PARTY LINK Connection
4 Troubleshooting
5 Appendix
40 Maintenance
40 – Handling the Unit
3
4
5
1
2
1
6
Getting Started
Unique Features
BLUETOOTH®
Listens to music stored on your
Bluetooth
device.
AUTO DJ
Blends the end of one song into the beginning of another for seamless playback.
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an App designed to let you take control of some of LG’s latest Audio devices.
(P
LG Sound Sync
Controls volume level of this unit by the remote control of your LG TV that is compatible with LG
Sound Sync.
Getting Started
7
Playable file
Requirement
Music file requirement
MP3/WMA file compatibility with this unit is limited as follows.
y
Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA)
y
Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
y
Maximum files : Data CD : 999 / USB : 2,000
y
Maximum folders : Data CD : 99 / USB : 200
y
File extensions : “.mp3”/“.wma”
y
Certain MP3/WMA files may not be played depending on the type or format of the file.
y
CD-ROM file format : ISO 9660/JOLIET
y
We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.
y
A protected file by DRM (Digital rights management) cannot be played on the unit.
y
The DTS disc is not supported.
You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
Compatible USB Devices
y
MP3 Player : Flash type MP3 player.
y
USB Flash Drive :
Devices that support USB2.0 or USB1.1.
y
The USB function of this unit does not support all
USB devices.
USB device requirement
y
Devices which require additional program installation when you have connected it to a computer, are not supported.
y
Do not extract the USB device while in operation.
y
For a large capacity USB, it may take longer than a few minute to be searched.
y
To prevent data loss, back up all data.
y
If you use a USB extension cable or USB hub, the
USB device is not recognized.
y
Using NTFS file system is not supported.
(Only FAT(16/32) file system is supported.)
y
This unit recognizes up to 2,000 files.
y
External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
y
USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y
Some USB may not work with this unit.
1
1
8
Getting Started
Remote control
Replacement of battery
(R03
(R03)
Remove the battery cover on the rear of the remote control, and insert the battery with
4
and
5
matched correctly.
• • • • • • • • • • • • • •
a
• • • • • • • • • • • • •
1
(Standby)
: Turns the power on or off.
B
(Open/Close) : Opens and closes the disc tray.
VOL
(Volume)
+/-
:
Adjusts speaker volume.
F
(Function) : Selects the function and input source.
Input source / Function
Disc
USB
AUX input
Bluetooth
LG Sound Sync (Wireless)
Radio
Display
CD
USB1 / USB2
AUX
BT
LG TV
FM
(Mute) : Mutes the sound.
-
PRESET·FOLDER
W
/
S
:
Chooses a preset number for a radio station.
(Page 25)
-
Searches for a folder of MP3/WMA files. When a CD/USB containing MP3/WMA files in several folders is being played, press
PRESET·FOLDER
W
/
S
to select the folder you want to play.
-
JUKEBOX/MEMORY
:
Stores radio stations. (Page 25)
-
-
Selects JUKE BOX mode. (Page 29)
Makes JUKE BOX list.
AUTO DJ
: Selects the AUTO DJ mode. (Page 19)
-
DELETE
:
Deletes MP3/WMA files. (USB only) (Page 19)
-
Deletes a song on the JUKE BOX list.
-
Deletes all the saved stations.
Getting Started
9
• • • • • • • • • • • • • •
b
• • • • • • • • • • • • •
REPEAT
: Listens to your tracks/files repeatedly or randomly.
TUNING -/+
: Selects the radio stations.
-
C / V
(Skip/Search) :
Skips backward or forward.
-
Searches for a section within a track/file.
N
(Play/Pause) :
-
-
Starts or pauses playback.
Selects stereo/mono.
-
Z
(Stop) :
Stops playback.
-
Cancels DELETE function.
EQUALIZER
: Chooses sound impressions.
SPECIAL EQ
: Chooses special equalizer.
J (
Information) :
-
Sees information about your music. An MP3 file often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
- Sees
Bluetooth
device name of the unit in BT
READY.
-
Sees the name of connected all
Bluetooth
device in
Bluetooth
mode.
-
When these units are successfully connected each other in WIRELESS PARTY LINK mode, each of connected device names appears in the each unit.
• • • • • • • • • • • • • •
c
• • • • • • • • • • • • •
0
to
9
numerical buttons
:
Selects numbered tracks, files, or preset number.
CLOCK
: Sets a clock and checks a time.
ALARM
: With the ALARM function you can turn on
CD, USB play and tuner reception at a desired time.
• • • • • • • • • • • • • •
d
• • • • • • • • • • • • •
SLEEP
:
Sets the system to turn off automatically at a specified time.
(Dimmer : The display window will be darkened by half.)
SET
: Confirms the setting.
?
: The button is not available.
USB REC
:
-
Records to USB.
-
To stop Recording, press and hold for 3 seconds.
1
1
10
Getting Started
Front panel
l a b c d e k j i h g f a
USB 1 Port
You can play sound files by connecting the USB
device.
b
Display window
c
(
Remote sensor)
d
USB 2 Port
You can play sound files by connecting the USB
device.
e
MASTER VOL.
(Volume)
Adjust speaker volume.
f
BASS BLAST
(or
BASS BLAST+
)
Press to select BASS (or BASS+) effect directly.
USB REC / DEMO
-
Records to USB.
-
To stop Recording, press and hold for
3 seconds.
-
In power off status, if you press
USB REC / DEMO
, show DEMO mode.
3
WIRELESS LINK
-
Selects MAIN or OTHER on WIRELESS PARTY
LINK mode.
-
Enable or disable WIRELESS PARTY LINK mode.
g
F
(Function)
Selects the function and input source.
Input source / Function
Disc
USB
AUX input
Bluetooth
LG Sound Sync (Wireless)
Radio
Display
CD
USB1 / USB2
AUX
BT
LG TV
FM
V
(Skip/Search)
-
Skips forward.
-
-
Searches for a section within a track/file.
Selects the radio stations.
B
(Open/Close)
Opens and closes the disc tray.
h
AUTO DJ
Selects the AUTO DJ mode.
N
(Play/Pause)
-
Starts or pauses playback.
-
Selects stereo/mono.
i
1
(Standby)
Turns the power on or off.
C
(Skip/Search)
-
-
Skips backward.
Searches for a section within a track/file.
-
Selects the radio stations.
Z
(Stop)
Stops playback or cancels DELETE function.
j
Disc tray
k
SPECIAL EQ
Chooses special equalizer.
SEARCH
Moves to folder or file in selection mode.
OK
Selects a folder when searching a file.
l
EQUALIZER / SEARCH
-
Chooses sound impressions.
-
Searches a folder or a file.
Getting Started
11
1
1
12
Getting Started
Rear Panel
a a
Power cord
b
SPEAKERS
terminals
c
AUX IN
(L/R)
Connect an auxiliary device.
d
ANTENNA
(FM)
b c d
ON
Getting Started
13
Useful functions for using the unit
Function Description
BT Lock On/Off
(Page 22)
It allows you to connect a
Bluetooth
device only on
BT (
Bluetooth
) and LG TV
functions.
Initial setting of this function was set to off.
To do Do this
ON
OFF
Press and hold
N
for 5 seconds in
BT (
Bluetooth
) function.
Press and hold
N
for 5 seconds in
BT (
Bluetooth
) function.
Turn off the unit by pressing
1
on the unit for 5 seconds.
Auto Power On
(Page 31)
It allows the unit to turn on automatically by input signals :
BT (
Bluetooth
) or LG TV
OFF
Turn off the unit by pressing
1
on the unit for 5 seconds.
1
2 Connecting
2
14
Connecting
Connecting to speakers
Attaching the speakers to the unit
To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad.
Connect the black of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus).
>
Caution
y
When you connect the speakers to the unit, make sure to connect the speaker’s cable and plug to the corresponding speaker connector.
y
Check the volume level before playing music to prevent infirm, child, and pregnant women from being shocked by the sudden and loud sound from the unit.
y
Do not use the unit in a limited space.
It may damage a person’s hearing. It is recommended to use it in a wide space.
y
Be careful to make sure children do not put their hands or any objects into the *speaker duct.
* speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure)
y
Use the speaker supplied with this unit only. Using any other speaker may cause malfunction.
y
The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers far away from either TV screen or PC monitor.
Connecting
15
Optional Equipment
Connection
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the
AUX IN
(L/R) connector.
If your device has only one output for audio (mono), connect it to the left (white) audio jack on the unit.
Listening to music from your external device
The unit can be used to play music from many types of external device.
1. Connect the external device to the
AUX IN
connector of the unit.
2. Turn the power on by pressing
1
.
3. Press
F
to select AUX function.
4. Turn on the external device and start it playing.
2
White
Red
Audio cable
DVD, Blu-ray player etc.
2
16
Connecting
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
Antenna Connection
Connect the supplied FM antenna for listening to the radio.
USB device
FM antenna
,
Note
Removing the USB Device from the unit :
1. Choose a different function/mode or
press
Z
twice in a row.
2. Remove the USB device from the unit.
,
Note
Be sure to fully extend the FM wire antenna.
3 Operating
Basic Operations
CD/USB Operations
1. Insert the disc by pressing
B
.
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing
F
.
To
Stop
Press
Z
.
Playback
Press
N
.
Do this
Pause
Press
N
during playback.
Searching
for a section within a track/file
Press and hold
C / V
during playback and release it at the point you want to listen to.
Selecting
a track/file
directly
Press
0
to
9
numerical buttons on the remote control to go to the desired file or track directly.
-
In stop status,
Press
C
/
V
to go to the next/ previous track/file.
Skipping to the next/ previous track/file
-
During playback,
(1) By using
C
/
V
buttons :
press
V
to go to the next track/file.
Playing in less than 3 seconds, press
C
to go to the previous track/file.
Playing after 3 seconds, press
C
to go to the beginning of the track/file.
(2) By using
SEARCH
:
Rotate
EQUALIZER / SEARCH
or
C / V
and press
N
to play the track/file.
Playing repeatedly
or randomly
Press
REPEAT
on the remote control repeatedly. Refer to the note for details about the display change.
Operating
17
,
Note
y
Repeat/Shuffle playback operates as follows.
On Display
OFF
Description
Plays songs in order, and stops the playback.
ONE
FOLDER
ALL
SHUFFLE
Plays a same song repeatedly
Plays songs in a folder
repeatedly. (Except AUDIO CD)
Plays all the songs repeatedly.
Plays all the songs once randomly, and stops the playback.
y
When you play JUKE BOX list, only ONE and
ALL are available.
y
Even after restarting the unit or switching one function to another, you can listen to music from the point where it’s last been
played.
y
If you leave the disc tray open for 5 minutes, it will close automatically.
Auto Play
-
AUDIO/MP3/WMA CD is played automatically after disc tray is opened and then closed.
-
Automatically the unit switches to the CD function if disc tray is opened and then closed even when there is no disc in disc tray.
3
3
18
Operating
Selecting a folder and an MP3/WMA file
On the unit
1. Press
and rotate
EQUALIZER / SEARCH
or
C / V
until a desired file appears. You can also search a folder if you press
SEARCH
again.
2. Press
or
N
to play the selected file. When you search a folder, press
OK
to select a file in the folder, then press
OK
or
N
again. The selected
file is played.
On the remote control
1. Press
W
/
S
or
C / V
repeatedly unti l a desired folder appears.
2. Press
to play it. The first file of the folder will
be played.
,
Note
y
CD/USB Folders/Files are recognized as below.
ROOT FOLDER
FILE
FOLDER1
FOLDER3
FILE 5
FILE 6
FILE 7
FOLDER4 FOLDER7 FILE 8
FILE 9
FILE 10
FILE 3
FILE 4
FOLDER8
FOLDER2
FOLDER5
FOLDER6
FILE 11
FILE 12
FILE 13
FILE 14
FILE 1
FILE 2
y
If there is no file in a folder, the folder will not
appear.
y
Folders will be presented as the following order;
ROOT FOLDER 1
FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
y
File will be played from
$
file No.1 to
$
file
No.14 one by one.
y
Files and folders will be presented in order recorded and may be presented differently according to the record circumstances.
*ROOT : The first screen you can see when a computer recognize the CD/USB is “ROOT”.
Deleting a file/folder or format
You can delete file, folder on your USB or format the
USB.
1. Select USB function by pressing
F
.
2. Press
DELETE
on the remote control repeatedly, the display changes as followings.
DEL FILE DEL DIR FORMAT
On Display
DEL FILE
DEL DIR
Description
Select the file you want to
delete.
Select the folder you want to
delete.
FORMAT
Select to format the USB device.
If you want to exit the current mode, press
Z
.
3. To delete file/folder or format, press and hold
DELETE
on the remote control.
>
Caution
y
Do not extract the USB device during operation. (play, delete, etc.)
y
Regular back up is recommended to prevent data loss.
y
The delete function may not be supported according to the USB status. (lock, etc.)
Operating
19
AUTO DJ
Auto DJ blends the end of one song into the beginning of another for seamless playback.
It equalizes volume across tracks/files for uninterrupted playback.
Press
AUTO DJ
repeatedly, the display changes as
followings.
SHUFFLE SEQUENTIAL OFF
On Display
OFF
Description
-
SHUFFLE
SEQUENTIAL
The music is played randomly on this mode.
The music is played repeatedly on this mode.
,
Note
y
AUTO DJ mode does not support searching for a section within a track/file or to play repeatedly or randomly.
y
If you move to other functions or stop the music using
Z
on AUTO DJ mode, AUTO DJ will be disabled.
y
AUTO DJ is not supported in the music file whose length is less than 60 seconds.
y
Only SEQUENTIAL is selected when played
JUKE BOX list.
3
3
20
Operating
Using a BLUETOOTH® wireless technology
About Bluetooth
Bluetooth
is wireless communication technology for short range connection.
The sound may be interrupted when the connection interfered by the other electronic wave or you connect the
Bluetooth
in the other rooms.
Connecting individual devices under
Bluetooth
wireless technology does not incur any charges. A mobile phone with
Bluetooth
wireless technology can be operated via the Cascade if the connection was made via
Bluetooth
wireless technology.
y
Available Devices : Smart phone, MP3, Notebook,
etc.
y
Version : 4.0
y
Codec : SBC, AAC
Bluetooth Profiles
In order to use
Bluetooth
wireless technology, devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music stored on the
Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make sure the
Bluetooth
feature is activated on your
Bluetooth
device. Refer to your
Bluetooth
device’s user guide. Once a pairing operation is performed, it does not need to be performed again.
1. Turn on the unit.
,
Note
When Bluetooth connection lock is activated, you can search
Bluetooth
device in BT function.
2. Operate the
Bluetooth
device and perform the pairing operation. When searching for this unit with the
Bluetooth
device, a list of the devices found may appear in the
Bluetooth
device
display depending on the type of
Bluetooth
device. Your unit appears as “LG CK43 (XX)”.
,
Note
y
XX means the last two digits of
Bluetooth
address. For example, if your unit has a
Bluetooth
address such as
9C:02:98:4A:F7:08, you will see
“LG CK43 (08)” on your
Bluetooth
device.
y
Depending on the
Bluetooth
device type,
some devices may have a different pairing process. Enter the PIN code (0000) as
needed.
y
You can connect this unit with up to 3
Bluetooth
devices simultaneously using the same method as described above, only in the
Bluetooth
function.
y
The multi phone pairing connection is only supported on Android devices. (Multi phone pairing connection may not be supported depending on the connected device specifications.)
y
Removable/detachable
Bluetooth
devices
(Ex : Dongle etc.) will not support multi phone
pairing.
3. When this unit is successfully connected with your
Bluetooth
device, “PAIRED” appears on the display window and change to
Bluetooth
device
name soon. Then “BT” will appear on the display window.
,
Note
y
“PAIRED” will momentarily appear on the display when you connect other devices for multi phone pairing
y
If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your
Bluetooth
device,
refer to your
Bluetooth
device’s user guide.
,
Note
y
When using
Bluetooth
technology, you have to make a connection between the unit and
the
Bluetooth
device as close as possible and keep the distance.
However, it may not work well in certain situations as described below:
-
There is a obstacle between the unit and
the
Bluetooth
device.
-
There is a device using same frequency with
Bluetooth
technology such as a medical equipment, a microwave or a wireless LAN device.
y
You should connect your
Bluetooth
device to this unit again when you restart it.
y
Even if this unit connected up to 3
Bluetooth
devices in the
Bluetooth
mode, you can play and control music by using only one of the connected devices.
Operating
21
3
3
22
Operating
,
Note
y
The sound may be interrupted when the connection has interference from other electronic devices.
y
Depending on the type of the device, you may not be able to use the
Bluetooth
function.
y
You can enjoy wireless system using phone,
MP3, Notebook, etc.
y
The more distance between the unit and
the
Bluetooth
device, the lower the sound quality becomes.
y
Bluetooth
connection will be disconnected when the unit is turned off or the
Bluetooth
device gets far from the unit.
y
When
Bluetooth
connection is disconnected, connect the
Bluetooth
device to the unit
again.
y
When a
Bluetooth
device is not connected,
“BT READY” appears on the display window.
y
When you use
Bluetooth
function, adjust the volume to a proper level on the
Bluetooth
device.
y
When you connect
Bluetooth
device (iOS
device etc.) to this unit or operate the device, the volume level can be synchronized with each other.
y
Bluetooth
connection will be disconnected when you change the
Bluetooth
function to the others. In “Music Flow Bluetooth” app connection, only one device which you are playing keeps
Bluetooth
connection. You can control the
Bluetooth
device with this unit but you cannot use sound output.
y
When entering
Bluetooth
function, this unit automatically connect to
Bluetooth
device
which is connected the last or playbacked
the last.
(Auto connection may not be supported depending on the connected device specifications.)
Controls connected Bluetooth device
You can control connected
Bluetooth
device by the
unit; play, pause, stop, skip.
,
Note
y
Only Android OS and iOS is available to use this function.
y
This function may not be supported depending on the
Bluetooth
device, or operated differently.
Bluetooth connection lock (BT LOCK)
You can limit
Bluetooth
connection to only
BT (
Bluetooth
) and LG TV function to prevent unintended
Bluetooth
connection.
To turn on this function, press and hold
N
for about
5 seconds in BT (
Bluetooth
) function.
“ON-BT LOCK” appears and you can limit
Bluetooth
connection.
To turn off this function, press and hold
N
for about
5 seconds in BT (
Bluetooth
) function.
“OFF-BT LOCK” appears.
,
Note
Even if you set up
Bluetooth
connection lock to
On, this unit turns on by Auto Power function.
Turn off Auto Power function to prevent it.
Operating
23
Using the Music Flow
Bluetooth App
,
Note
y
Only Android OS is available to use “Music
Flow Bluetooth” app with this unit.
y
It is recommended to use the latest version of app.
Install “Music Flow Bluetooth”
App onto Your Bluetooth Device
There are two ways to install “Music Flow Bluetooth”
App onto your
Bluetooth
device.
Install “Music Flow Bluetooth” App through QR code
1. Install “Music Flow Bluetooth” app through QR code. Use the scanning software to scan the QR code.
About “Music Flow Bluetooth”
App
“Music Flow Bluetooth” app brings a suite of new features to this unit.
To enjoy more features, you are recommended to download and install free “Music Flow Bluetooth”
app.
Here is introduce a few of the many features of
“Music Flow Bluetooth” app.
Multi Juke box
: Your entertainment increases three fold when you connect up to 3
Bluetooth
phones at the same time. Play music from all three phone and create a customized playlist from all the phones.
2. Tap an icon for installation.
,
Note
y
Make sure that your
Bluetooth
device is
connected to the Internet.
y
Make sure that your
Bluetooth
device
has a scanning software application. If you don’t have one, download one from “Google
Android Market (Google Play Store)”.
y
Depending on the area, QR code may not work.
3
3
24
Operating
Install “Music Flow Bluetooth” App through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
3. In the search result list, find and tap
“Music Flow Bluetooth” to start downloading
Bluetooth
app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,
Note
y
Make sure that your
Bluetooth
device is
connected to the Internet.
y
Make sure that your
Bluetooth
device is
equipped with “Google Android Market
(Google Play Store)”.
Activate Bluetooth with
“Music Flow Bluetooth” App
.
“Music Flow Bluetooth” app helps to connect your
Bluetooth
device to this unit.
“Music Flow Bluetooth” app icon on the home screen to open “Music Flow Bluetooth” app
, and
go to the main menu.
2. If you want to get more information to operate, tap [Setting] and tap [Help] menu.
,
Note
y
“Music Flow Bluetooth ” app will be available in the software version as follow;
-
Android O/S : Ver 4.0.3 (or later)
y
If you use “Music Flow Bluetooth” app for operation, there would be some differences between “Music Flow Bluetooth” app and the supplied remote control. Use the supplied remote control as necessary.
y
Depending on the
Bluetooth
device, “Music
Flow Bluetooth ” app may not work.
y
After connection of “Music Flow Bluetooth” app, music may be output from your device. In this case, try connecting procedure again.
y
If you operate the other applications or change the settings on your
Bluetooth
device while using “Music Flow Bluetooth” app, “Music Flow Bluetooth” app may operate abnormally.
y
When “Music Flow Bluetooth” app operates abnormally, check your
Bluetooth
device and
the connection of “Music Flow Bluetooth” app and then try to connect again.
y
Depending on the smart phone's operating system, you have some differences for “Music
Flow Bluetooth” operation.
y
Check
Bluetooth
setting on your
Bluetooth
device if “Music Flow Bluetooth” app connection does not work well.
Operating
25
Radio Operations
Connect the supplied FM antenna for listening to the
Listening to the radio
1. Press
until FM appears in the display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold
TUNING -/+
on the remote control or
C / V
on the unit for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station.
Or
Manual tuning :
Press
TUNING -/+
on the remote control or
C / V
on the unit repeatedly.
3. Adjust the volume by pressing
VOL +/-
on the remote control or by rotating volume knob on the unit repeatedly.
Improving poor FM reception
Press
N
. This will change the tuner from stereo to mono and usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press
until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING -/+
on the remote control or
C / V
on the unit.
3. Press
JUKEBOX / MEMORY
on the remote control.
A preset number will blink in the display window.
4. Press
W/S
on the remote control to select the preset number you want.
5. Press
on the remote control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET·FOLDER
W/S
or
0
to
9
numerical buttons on the remote control.
Deleting all the saved stations
1. Press
on the remote control.
“DEL ALL” will flash up on the unit display.
2. Press
on the remote control to erase all the saved radio stations.
“DELETED ALL” will flash up on the unit display.
3
3
26
Operating
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround sound fields. The displayed items for the Equalizer may be different depending on sound sources and effects.
You can select a desired sound mode by using
EQUALIZER
.
On Display
BASS (BASS BLAST)
or
BASS+ (BASS BLAST+)
Description
Reinforces the bass and powerful sound.
POP
CLASSIC
ROCK
JAZZ
FOOTBALL
STANDARD
This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock, pop, jazz or classic concert.
You can enjoy the equalizer FOOTBALL
STADIUM.
You can enjoy optimized sound.
You can select a desired sound mode by using
SPECIAL EQ
on the remote control or the unit.
On Display Region Description
FUNK, REGUETON,
SAMBA,
MERENGUE, AXE,
SALSA, SERTANEJ,
FORRO
ARABIC
DANGDUT
Latin
America
Middle East
Indonesia
Optimized equalizer for the music genre prefered in each region.
AFRO
INDIA
Africa
India
,
Note
y
On some speakers, sound may not be heard or heard in low sound depending on the sound mode.
y
By pressing
BASS BLAST
(or
BASS BLAST+
)
on the unit , you can directly select BASS
(BASS BLAST) or BASS+ (BASS BLAST+) effect.
Operating
27
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, USB1, AUX, FM)
1. Connect the USB device to the unit.
2. Press
to select a function you want to record.
3. Start the recording by pressing
USB REC
on the remote control or
USB REC / DEMO
on the unit.
Function Status Result
Play/Pause Recorded until stop
CD, USB
Resume stop
Quick recorded the latest song
Full stop
Quick recorded All songs
In case below, scope is
limited.
- After File search (Page
indexed song
- Only while the Folder name is displayed on the display window, quick recording All songs on
Folder. (Folder Search
Mode is released when there is no button input for a few seconds after entering the folder search mode.) (Page 18)
- After the JUKE BOX
On (Page 29), quick recorded All songs of
JUKE BOX.
AUX,
FM
-
Recorded until stop
- I
f you connect both USB1 and USB2, press
USB REC
on the remote control or
USB REC / DEMO
on the unit when USB1 or
USB2 which you want to record blinks in the display window.
To stop recording
To stop recording, press and hold
USB REC
on the remote control or
USB REC / DEMO
on the unit for
3 seconds. Otherwise, the recording continues.
Pausing recording
During CD/USB playback or pause, or external sound source recording,
press
USB REC
on the remote control or
USB REC / DEMO
on the unit to pause recording. Press it again to restart recording.
To select recording bit rate
1. Press and hold
USB REC
on the remote control or
USB REC / DEMO
on the unit for 3 seconds.
2. Press
/
V
to select a bit rate.
3.
Press
USB REC
on the remote control or
USB REC / DEMO
on the unit to finish the
setting.
The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense.
This equipment should not be used for such purposes.
Be responsible
Respect copyrights
3
3
28
Operating
,
Note
y
When you stop recording, the file that has been recorded at that time will be stored.
(Except when recording MP3/ WMA files that are in stop status.)
y
Do not remove the USB device or turn off the unit during USB recording. If does not, an incomplete file may be made and not deleted on PC.
y
If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the display window.
y
Multi card reader device or external HDD can not be used for USB recording.
$%@3&$
"6%*0@
"6%*0@
y
A file is recorded by about 512 Mbyte when you record for a long term.
,
Note
y
You may not store more than 2,000 files.
y
In case of the unsupported MP3/WMA file, the file recording may be stopped.
y
When you are recording during playback, the sound now playing is output.
y
It’ll be stored as follows.
AUDIO CD MP3/WMA
Play or pause status Play or pause status
$%@3&$
"6%*0@
"6%*0@
'*-&@3&$
$%@3&$
"6%*0@
"6%*0@
53"$,@
53"$,@
The other status
'*-&@3&$ $%@3&$
"6%*0@
"6%*0@
53"$,@
53"$,@
The other status
'*-&@3&$
"#$ 'JMFOBNF
%&' 'JMFOBNF
The other source*
05)&34@3&$
"6%*0@
"6%*0@
Tuner
56/&3@3&$
"6%*0@@'.
* : AUX and the like.
5IFPUIFSTUBUVT
5IFPUIFSTUBUVT
1MBZPSQBVTFTUBUVT
1MBZPSQBVTFTUBUVT
Tuner : The current recording frequency is shown.
'*-&@3&$
"#$ 'JMFOBNF
%&' 'JMFOBNF
Operating
29
JUKE BOX Playback
JUKE BOX function enables you to make a playlist of your favorite tracks/files from a disc or USB device.
A playlist of up to 100 tracks/files can be entered.
Making JUKE BOX list
1. Press and hold
JUKEBOX / MEMORY
on the remote control to enter the edit mode.
(Playing will be stopped when you press
JUKEBOX / MEMORY
on the remote control.)
2. Select a track/file by pressing
C / V
on the remote control.
3. Press and hold
JUKEBOX / MEMORY
on the remote control to save the track/file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET·FOLDER
W
/
S
on the remote control to select the JUKE BOX program number.)
5. Press
on the remote control once again.
To play the JUKE BOX list, press
N
on the remote control after you make the list.
,
Note
When making or modifying the JUKE BOX list,
REPEAT mode is off.
Enjoying JUKE BOX
Press
JUKEBOX / MEMORY
on the remote control once. “ON - JUKE BOX” appears on the display window.
To play JUKE BOX list, press
N
on the remote control.
To cancel it, press
JUKEBOX / MEMORY
on the remote control once.
“OFF - JUKE BOX” appears on the display window.
Editing JUKE BOX list
1. Press and hold
JUKEBOX / MEMORY
on the remote control to enter the edit mode.
(Playing will be stopped when you press
JUKEBOX / MEMORY
on the remote control.)
2. Press
W/S
on the remote control to select a track/file to edit.
3. Press
C / V
on the remote control.
4. Press
on the remote control.
5. Repeat 2 to 4 to store the other tracks/files.
6. Press
on the remote control once again.
To play the JUKE BOX list, press
N
on the remote control after you edit the list.
Deleting JUKE BOX list
Deleting function works in the edit mode.
1. Press and hold
JUKEBOX / MEMORY
on the remote control to enter the edit mode.
Or
Press
on the remote control while JUKE
BOX is played to enter the edit mode.
2. Select a song by pressing
PRESET·FOLDER
W/S
on the remote control repeatedly.
3. Press
DELETE
on the remote control while a song is selected.
,
Note
y
If there is no JUKE BOX list, “NO PROG” appears on the display window when you
press J
UKEBOX / MEMORY
on the remote control.
y
JUKE BOX is switched off in the case below.
-
Changing to a different function.
-
Turning off and on the unit.
-
Operating the numerical buttons on the remote control.
-
Playing a file by using
SEARCH
and
EQUALIZER / SEARCH
on the unit.
y
JUKE BOX list is cleared in the case below.
-
Removing the disc or the USB device.
-
Deleting or recording music files in the USB
device.
3
3
30
Operating
Other Operations
Turn off the sound temporarily
Press
on the remote control to mute your sound.
You can mute your unit, for example, to answer the telephone, the “MUTE” will appear in the display window.
To cancel it, press on the remote control again or change the volume level.
DEMO
In the power off state, press
USB REC / DEMO
on the unit once. The unit will power on and display the each of functions in the display window.
To cancel the DEMO function, press
USB REC / DEMO
on the unit once more.
,
Note
You can enjoy other functions during the DEMO, the DEMO will temporarily pause.
- Without input key in 10 sec, the DEMO will playback automatically.
Sleep Timer Setting
Press
SLEEP
on the remote control repeatedly to select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned off.
To cancel the sleep function, press
SLEEP
on the remote control repeatedly until “OFF” appears.
,
Note
y
You can check the remaining time before the unit is turned off. Press
SLEEP
on the remote control to check or change the remaining
time.
y
You can edit the remain time when displays the remaining time or “DIMMER”.
Dimmer
Press
SLEEP
on the remote control once.
The display window will be darkened by half.
To cancel it, press
SLEEP
on the remote control repeatedly until “OFF” appears.
Resume stop
The unit records the point where you pressed
Z
depending on the disc or USB. If you press
Z
twice, the unit will clear the stopped point.
Auto power down
This unit will turn itself off to save electricity in the case were the main unit is not connected to an external device and is not used for 15 minutes.
The unit will also turn itself off after six hours if the main unit has been connected to another device using the analog inputs.
Auto power down function is applied to only MAIN unit in case of WIRELESS PARTY LINK connection.
In case of OTHER unit, Auto power down is available after disconnection OTHER unit and MAIN unit.
Operating
31
AUTO POWER On
This unit automatically turns on by an input source :
Bluetooth
or LG TV
When you turn on your TV connected to this unit, this unit recognizes the input signal and selects the suitable function. You can hear the sound from the unit.
If you try to connect your
Bluetooth
device, this unit turns on and connect your
Bluetooth
device.
You can play your music.
When you turn off this unit by pressing
1
on the unit for 5 seconds each time, you can turn on or off the AUTO POWER function.
On Display
ON-AUTO POWER
OFF-AUTO POWER
Description
AUTO POWER function is turned on.
AUTO POWER function is turned off.
,
Note
y
Depending on the connected device, this function may not operate.
y
Depending on the connected device, the unit turns on but
Bluetooth
function may not be connected.
y
If you disconnect
Bluetooth
connection by this unit, some
Bluetooth
devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before turning off the unit.
y
If you try to connect to the “Music Flow
Bluetooth” app,
Bluetooth
function of this unit is turned on.
y
If you turn on the unit using LG TV or
Bluetooth
function, proper function of this unit is turned on.
y
If you have already paired with this unit, automatically this unit can turn on by an input source when this unit is turned off.
3
3
32
Operating
Auto function change
This unit recognizes input signals such as
Bluetooth
and LG TV and then changes suitable function automatically.
When you try to connect Bluetooth device
When you try to connect your
Bluetooth
device to this unit,
Bluetooth
function is selected. Play your music on the
Bluetooth
device.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
,
Note
y
This function is not available during recording or deleting.
y
This function only works with devices that were previously connected.
y
If the
Bluetooth
connection lock function
is set,
Bluetooth
and LG TV connection will be only available on
Bluetooth
and LG TV
function.
Operating
33
Setting the Clock
1. Turn the unit on.
2. Press and hold
CLOCK
on the remote control.
3. Select time mode by pressing
C / V
on the remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press
on the remote control to confirm your selection.
5. Select the hours by pressing
C / V
on the remote control.
6. Press
on the remote control.
7. Select the minutes by pressing
C / V
on the remote control.
8. Press
on the remote control
.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
Your unit’s clock will be automatically synchronized with your device by activating
Bluetooth
connection through “Music Flow Bluetooth” app.
Using your player as an alarm clock
1. Turn the unit on.
2. Press and hold
ALARM
on the remote control.
3. Press
C / V
on the remote control to change the hours and minutes and press
SET
on the remote control to save.
4. Press
C / V
on the remote control to select function and press
SET
on the remote control to
save.
- Press
C / V
on the remote control to select a preset number when you select Tuner and then,
press
SET
on the remote control
.
If there is no preset number, this step is skipped.
5. Press
/
V
on the remote control to change the volume and press
SET
on the remote control to save.
,
Note
y
If you set the clock time, you can check the
time by pressing
CLOCK
on the remote control even when the player is turned off.
y
You can set alarm after you set the clock
time.
y
If you set the clock time and alarm, you can check the alarm setting information by
pressing
ALARM
on the remote control
even
when the unit is turned off.
y
You can select ALARM ON/OFF mode by
pressing
ALARM
on the remote control
.
3
34
Operating
LG Sound Sync
3
You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
1. Turn on the unit by pressing
1
.
2. Press
until LG TV function is selected.
3. Set up the sound output of TV to listen to the sound through this unit :
TV setting menu [Sound] [TV Sound output]
[LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for about 3 seconds and then you can see “LG TV” on the display window if the TV and this unit are connected normally.
,
Note
y
You can also use the remote control of this unit while using LG Sound Sync. If you use TV’s remote control again, the unit synchronizes with the TV. (According to TV Specifications, the volume and mute of this unit synchronize with TV.)
y
If the connection fails, check the conditions of this unit and your TV : power, function.
y
Make sure of the condition of this unit and the connection in the cases below when using LG
Sound Sync.
-
The unit is turned off.
-
Changing to a different function.
-
Disconnecting the wireless connection caused by interference or a distance.
y
The amount of time to turn off this unit is different depending on your TV.
y
If you try to change the function on using the LG TV function, volume will be changed according to the LG TV volume level.
y
Details of TV setting menu vary depending on the manufacturers or models of your TV.
y
If you turned off the unit directly by pressing
1
,
LG Sound Sync will be disconnected. To use this function again, you should reconnect the
TV and the unit.
y
The volume may be increased when the TV and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect with this unit.
y
When you turn on your LG TV connected by LG Sound Sync or enter LG TV function, this unit changes the function to LG TV automatically.
y
You should set the TV Sound output manually depending on the TV version.
y
If you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit may louder the volume due to synchronizing volume with TV’s.
WIRELESS PARTY LINK
Connection
The output sound of
(MAIN)
unit is expanded to
(OTHER)
unit
.
It is compatible with unit that supports WIRELESS
PARTY LINK.
The name of function about sound expansion between the compatible products wirelessly was changed to WIRELESS PARTY LINK.
1. Press
WIRELESS LINK
on the unit.
PARTY LINK MODE SELECT appears in the display
window.
2. Press
WIRELESS LINK
on the unit to select
MAIN or OTHER.
-
unit : Selects MAIN.
-
unit : Selects OTHER.
Two units try to connect with each other.
3. When these units are successfully connected each other, each of connected device names appears in the each unit.
Operating
35
,
Note
y
If you are using the LG Sound Sync,
this
function is not available. If you connect
the
LG TV function, “NOT SUPPORT” appears in the display window.
y
When WIRELESS PARTY LINK is disconnected,
OTHER
unit is changed to
BT (
Bluetooth
)
function.
y
If the connection is failed, “FAILED” appears in the display window.
y
Mute function is synchronized with each other.
y
WIRELESS PARTY LINK connection will be disconnected when you turn off the unit or
press
3
WIRELESS LINK
on the unit.
y
Sound of MAIN unit and OTHER unit may be different depending on playback status or source.
y
Check the following information when connecting to
Bluetooth
.
-
You can connect only one
Bluetooth
device in the MAIN unit. You cannot connect
Bluetooth
device to the OTHER unit.
-
WIRELESS PARTY LINK connection is only supported on Android devices.
(WIRELESS PARTY LINK connection may not be supported depending on the connected device specifications or OS.)
-
Removable/detachable
Bluetooth
devices (ex. Dongle etc.) will not support
WIRELESS PARTY LINK connection.
-
When WIRELESS PARTY LINK is connected,
Bluetooth
connection is not available in status of recording or deleting.
-
If you connect WIRELESS PARTY
LINK while you are playing connected
Bluetooth
device, it may be reconnected again, depending on phone specification.
y
MAIN / OTHER are may be displayed to
MASTER (Primary) / SLAVE (Secondary) in the existing products.
3
4 Troubleshooting
4
36
Troubleshooting
Troubleshooting
General
Problem
The unit does not work properly.
Cause & Correction
y
Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
y
Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y
Previous setting may not be saved when device power is shut off.
No Power.
y
The power cord is not plugged in. Plug in the power cord.
y
Check whether electricity failed.
Check the condition by operating other electronic devices.
No sound.
The unit does not start playback.
y
Check whether you select right function.
Press function button and check the selected function.
y
Check to see if the Speakers are connected correctly. Speaker cables connected correctly.
y
An unplayable disc is inserted. Check the playable disc.
y
No disc is inserted.
Insert a disc.
y
The disc is dirty. Clean the disc. (Page 40)
y
The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
Radio stations cannot be tuned in properly.
y
The antenna is positioned or connected poorly.
Connect the antenna securely.
y
The signal strength of the radio station is too weak.
Tune to the station manually.
y
No stations have been preset or preset stations have been cleared (when being tuned by scanning preset channels).
Preset some radio stations, see page 25 for details.
Troubleshooting
37
Problem Cause & Correction
The remote control does not work properly.
y
The remote control is too far from the unit.
Operate the remote control within about 7 m (23 feet).
y
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
y
The batteries in the remote control are exhausted.
Replace the batteries with new ones.
LG Sound Sync does not work.
y
Check whether your LG TV supports LG Sound Sync.
y
Check connection of LG Sound Sync.
y
Check sound setting of your TV and this unit.
4
5 Appendix
38
Appendix
General specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Operating temperature
Operating humidity
Refer to the main label on the unit.
Refer to the main label on the unit.
Approx. 300 mm x163 mm x 241 mm
5 °C to 35 °C
60 %
5
Inputs
Analog audio in (AUX IN) 1.0 Vrms (1 kHz, -6 dB), 75
Ω
, RCA jack (L, R)
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
System
Frequency Response
Signal-to-noise ratio
Dynamic range
Bus Power Supply (USB)
100 to 20,000 Hz
More than 75 dB
More than 75 dB
5 V
0
500 mA
Amplifier (RMS Output power)
Total output
Front
300 W RMS
150 W RMS X 2 (4
Ω
at 1 kHz, 30 % THD)
y
Design and specifications are subject to change without notice.
Appendix
39
Speaker specifications
Front speaker
Type
Impedance
Rated Input Power
Max. Input power
Dimensions (W x H x D)
2 Way 2 Speaker
4
Ω
150 W RMS
300 W RMS
Approx. 201 mm x 306 mm x 216 mm
y
Design and specifications are subject to change without notice.
Trademarks and Licenses
The
Bluetooth®
word mark and logos are owned by the
Bluetooth
® SIG, Inc. and any use of such marks by
LG Electronics is under license.
Other trademarks and trade names are those of their respective owners.
5
5
40
Appendix
Maintenance
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center to out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for old vinyl records.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service
center.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- FM Black
- CD, CD-R, CD-RW
- 300 W
- MP3 playback Timer
- Bluetooth
- Power source: AC/Battery
Related manuals
advertisement
Table of contents
- 2 Safety Information
- 4 Table of Contents
- 6 Unique Features
- 7 Playable file Requirement
- 7 Music file requirement
- 7 Compatible USB Devices
- 7 USB device requirement
- 8 Remote control
- 10 Front panel
- 12 Rear Panel
- 14 Connecting to speakers
- 14 Attaching the speakers to the unit
- 15 Optional Equipment Connection
- 15 AUX IN Connection
- 15 Listening to music from your external device
- 16 USB Connection
- 16 Antenna Connection
- 17 Basic Operations
- 17 CD/USB Operations
- 17 Auto Play
- 18 Selecting a folder andan MP3/WMA file
- 19 Deleting a file/folder or format
- 19 AUTO DJ
- 20 Using a BLUETOOTH® wireless technology
- 20 Listening to music stored on the Bluetooth devices
- 23 Using the Music Flow Bluetooth App
- 23 About “Music Flow Bluetooth” App
- 23 Install “Music Flow Bluetooth” App onto Your Bluetooth Device
- 24 Activate Bluetooth with “Music Flow Bluetooth” App
- 25 Radio Operations
- 25 Listening to the radio
- 25 Improving poor FM reception
- 25 Presetting the Radio Stations
- 25 Deleting all the saved stations
- 26 Sound adjustment
- 26 Setting the sound mode
- 27 Advanced Operations
- 27 Recording to USB
- 29 JUKE BOX Playback
- 30 Other Operations
- 30 Turn off the sound temporarily
- 30 DEMO
- 30 Resume stop
- 30 Sleep Timer Setting
- 30 Dimmer
- 31 Auto power down
- 31 AUTO POWER On
- 32 Auto function change
- 33 Setting the Clock
- 33 Setting the Clock through “Music Flow Bluetooth” App
- 33 Using your player as an alarm clock
- 34 LG Sound Sync
- 35 WIRELESS PARTY LINK Connection
- 36 Troubleshooting
- 36 General
- 38 General specifications
- 39 Speaker specifications
- 39 Trademarks and Licenses
- 40 Maintenance
- 40 Notes on Discs
- 40 Handling the Unit