LG | LP-K3061CA.ANWZLAL | Owner's Manual | LG LP-K3061CA.ANWZLAL Owner's manual

LG LP-K3061CA.ANWZLAL Owner's manual
P/No.: 3828A20026E
Printed in Korea
Package
Air
Conditioner
OWNER'S
MANUAL
Before
manual
using your air conditioner please read this
carefully and keep it for future reference.
Prior to
installation, this air-conditioning unit
must be submitted for
service which
Norm).
approval by the utility
provides electricity (EN 60555-3
Safety precautions
Safety Precautions
SafetyPrcuions
To
................................2
Warning
prevent injury
following
Caution .................................3
operation
the seriousness is classified
Specifications ....4
due to
and
property damage, the
ignoring
of instruction will
cause
by the following
harm
or
indications.
WARNING
WARNING
Indoor Unit Controls and
This
Indicators ..............................5
symbol
indicates the
possibility
of death
or
serious
possibility
of
or
damage
injury.
Name and Function-Remote
CAUTION
CAUTION
Control...................................6
Air conditioner
operation.......8
This
symbol indicates
properties only.
Care and Maintenance
Operation Tips
the
Installation
....................20
injury
to
precautions
WARNING
WARNING
Do not
install, remove and re-install the unit by yourself.
Improper installation will cause water leakage, electrical shock, or
fire. Please consult authorized dealer or specialist for the installation
Troubleshooting tips
Before You
Call For Service ...............21
work.
CAUTION
CAUTION
The
the
OPERATING
of the air conditioner is based
cycle system
air cooling type heat
reverse
Therefore if the outdoor unit is
exposed
INDOOR
to very low
off
OUTDOOR
MAX.
MIN.
MAX.
MIN.
32°C
21°C
43°C
21°C
HEATING MODE
INDOOR
OUTDOOR
MAX.
MIN.
MAX.
MIN.
temperature, specifically below 0°C, the heating capacity
drops
TEMPERATURE(°C)
COOLING MODE
pump which absorbs heated
air from the outdoor unit and discharges it indoor.
on
rapidly.
27°C
20°C
24°C
1°C
WARNING
WARNING
Do not
damage
or use an
Do not
unspecified
operate with
wet hand.
power cord.
?
It will
cause
electrical shock
Do not insert
or
fire.
anything into the
?
air inlet/air
Since the fan rotates at
cause an
When
cause
electrical shock.
Do not expose the skin directly to cool air
long periods of time.
an
injury
or
high speed,
damage the unit.
abnormality (smell
of
this may
If the unit continues to
condition, it may
cause
This could
?
burning, etc)
Repair
occurs, stop the air conditioner, and
disconnect the power plug or turn off the
circuit breaker.
?
It will
for
outlet.
?
Troubleshtingp
people
Incorrect
Care and Maintenance .......20
OperatingIsuco
CarendMitc
other
user or
damage,
Operating Instructions
Features and
to the
instructions must be followed.
or
damage
your health.
relocation should not be done
by
the customer.
operate in an abnormal
fire, damage, etc. In
?
If this is done
electric
this case, consult your dealer.
water
2
incorrectly, it may cause a fire,
shock, injury by dropping of the unit,
leakage,
etc. Consult your dealer.
CAUTION
?
Contact the authorized Service technician for
?
Contact the installer for installation of this unit.
?
The air conditioner is not intended for
?
The
?
?
repair or maintenance of this
unit.
use by young children or infirm persons without supervision.
appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
If the supply flexible cord is damaged, it must be replaced by the manufacturer or the manufacturer's
service agent or similary qualified person in order to avoid hazard.
CAUTION
CAUTION
When the air filter is to be
Do not clean the air
Ventilate well when used
removed, do not touch the
metal parts of the indoor unit.
conditioner with water.
together with
?
?
It may cause an injury.
Should be disconnected from
?
supply
When the unit is to be
cleaned, switch off,
Do not
and turn
It may
cause an
electric
Do not
a
pet
or
?
exposed
Do not leave
an
on
stand which is
shock,
?
This could
injure
the
pet
or
?
plant.
apply
shortage
may
occur.
house
be
An oxygen
installation
damaged.
to direct air flow.
burning.
or
put
plant where it will
off the circuit breaker.
?
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
stove, etc.
a
Do not
insecticide
flammable spray.
is
put
exposed
a
stove, etc. where
The unit may drop or fall down
and cause an injury.
Do not
to direct air flow.
not
?Itmaycauseafireor
?
It may affect combustion.
step
on
the
indoor/outdoor unit and do
?
deformation of the cabinet.
put anything
It may
on
it.
injury through
falling down.
cause an
dropping
or
Do not insert your finger or
stick etc. into the air inlet
When the unit is not
Do not open the air inlet
be used for
during operation.
grille.
off the circuit breaker.
?
It will
Do not
?
injury, electric
by the high voltage.
?
cause an
shock
use
Do not
If not, dirt may collect and
fire.
deterioration of
quality,
?
It may
shock
grille
cause an injury, electric
by the high voltage.
Do not operate for a long time in high
humidity, e.g. leaving a door or window open.
special purposes.
this air conditioner to preserve
devices, food, animal, plants, and art
cause
going to
long time, turn
cause a
use
precision
objects.
It may
for
a
?
In the
with
etc.
3
cooling mode, if it is operated in a room
high humidity (80%RH or more) for a long
time,
water condensed in the air conditioner may
drop
and may wet and
spoil furniture,
etc.
ENGLISH
Features and
SafetyPrcuions
OperatingIsuco
CarendMitc
Troubleshtingp
Specifications
Features
8
Anti-Bacteria filter
Super energy efficiency
9
3 minutes
3
Micom control
10 Jet Cool operation
4
Whisper quiet operation
11
5
Wireless remote control
12 Auto restart
6
2
13
7
Removable air filter
1
Design
2
for
cooling
cooling speeds
delay
circuit
Energy saving
Plasma Air
Purifying system
(CA/HA/ZA MODEL)
Specifications
Air Outlet Vent
Remote
Signal
Receptor
Air Intake Vent
(Rear)
Air Intake Vent
Air Outlet
Vent
4
Indoor Unit Controls and Indicators
The remote control transmits the
to the
signals
system.
Features of the Remote Control- Door Closed
8
910
16
17
15
19
8
11
10
16
17
HA/ZA MODEL
CA MODEL
A/CL
R00M
TEMP.
SET
TEMP.
Mode
Temp.
Jet Cool
R00M
TEMP.
JET COOL
On/Off
Fan
Energy
Saving
SET
TEMP.
19
21
Fan
Speed
A/CL
20
JET COOL
On/Off
Mode
Fan
Temp.
Speed
Jet Cool
HA/ZA MODEL
Fan
Energy
Saving
CA MODEL
Air
Air
Cleaning
A/CL
Cleaning
18
A/CL
1234567
121314
1234567
121314
(Heat Pump Model)
1
10
SOFT DRY OPERATION LAMP
pressed
pressed again.
11
AUTO OPERATION LAMP
OPERATION MODE SELECTION BUTTON
12
JET COOL OPERATION LAMP
13
ENERGY SAVING OPERATION LAMP
14
OFF TIMER OPERATION LAMP
15
FAN OPERATION LAMP
and
2
3
(Cooling Model)
START/STOP BUTTON
Operation
starts when this button is
stops when the button is
Used to select the
operation
Mode.
INDOOR FAN SPEED SELECTION
Used to select fan
speed
in two
steps-low,
high.
4
JET COOL BUTTON
Used to start
stop the speed
cooling.(Speed cooling operates super high
fan
5
6
speed
in
or
cooling mode)
ENERGY SAVING BUTTON
18
ROOM TEMPERATURE SETTING
19
Used to select the
7
16
17
BUTTONS
room
temperature.
20
FAN OPERATION BUTTON
Used to circulate
room
air without
8
COOLING OPERATION LAMP
9
HEATING OPERATION LAMP
ENGLISH
15
cooling.
21
5
AUTO AIRFLOW OPERATION
LAMP(VERTICAL)
OUTDOOR UNIT OPERATION LAMP
PLASMA AIR PURIFYING
BUTTON(CA/HA/ZA MODLE)
AIR CLEANER OPERATION
LAMP(CA/HA/ZA MODEL)
ELECTRIC HEATER OPERATION
LAMP(OPTION)
DEFROST OPERATION LAMP
18
Name and Function-Remote Control
SafetyPrcuions
Control
1
1
Troubleshtingp
?
to the
package
air
conditioner
2
2
14
8
3
A/CL
Operation Display
?
Each time the button is
changed
11
7
12
4
5
6
(Heat Pump Model)
1
2
A/CL
11
7
12
Purifying Button(CA/HA/ZA MODEL)
Operation Button(CL/HL/ZL MODEL)
Fan
Auto Airflow Direction Control Button
?
The vertical louvers
Jet Cool
swing
left and
right.
Operation Button
Indoor Fan
Speed Selection Button
speed in two steps
[Low, High]
?
8
Cooling
9
Auto
10
Soft
11
Energy Saving Operation Button
12
?
9
10
Plasma Air
7
8
6
mode is
If you select "0:00" the off Timer function will
be canceled.
13
345
pressed, the
following process.
(1, 2, 3, 4, 5, 6, 7 hours)
in the
Timer set
10
6
of the Remote Control
Timer Set Button
9
345
OperatingIsuco
CarendMitc
Signal Transmitter
Transmits the signals
To select the desired fan
ON Button
Heating Button (Heat Pump Model Only)
Operation Button(Cooling Model Only)
Dry Operation Button
Power ON/OFF Button
Operation will start when this button is
pressed, and stop when the button is pressed
again.
13
(Cooling Model)
13
Temperature Setting Buttons
14
Electric Heater ON/OFF
Wireless Remote Control Puts all functions at your
Handling
?
?
?
?
?
Button(Option)
fingertips
the remote control
Aim at the
signal receptor on the package air conditioner when operating.
The remote control signal can be received at a distance of up to about 7meters.
Be sure that there are no obstructions between the remote control and the signal receptor.
Do not drop or throw the remote control.
Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit,
other heat
source.
6
or
Remote Control
Preparation
How to mount onto
1
Use the
to
screws
secure
a
wall
the holder to the wall
or
attach the holder side of indoor
unit.
2
To insert the remote control to the holder.
Insert
Pull
How to insert batteries
Remove the
cover
?
from the
?
Slide the
the
cover
according
use
rechargeable
different from standard
as
to
dry
direction.
arrow
Do not
batteries such batteries
back of the remote controller.
cells in
shape,
dimensions, and
performance.
Insert two batteries.
?
Be
sure
that the
directions
?
Be
sure
are
(+)
and
(-)
?
correct.
Change
properly
Re-attach the
Slide the
if the remote
control does not work
are new.
?
the batteries with
a new one
that both batteries
cover
after
extended
cover.
into back
position.
7
using for an
length of time.
ENGLISH
Air conditioner
SafetyPrcuions
How to
1
?
Each time the
shifted in the
Mode
the
use
Operation
arrow
operation
Operation
Mode Selection Button is
pressed,
the
Operation
Fan
Speed
SET
TEMP.
OperatingIsuco
CarendMitc
Mode is
direction.
Soft
SET
TEMP.
Dry Operation
Heating Operation
SET
TEMP.
SET
TEMP.
Cooling Operation
Heating+Heater Operation
(Model only With Electric Heater)
(Heat Pump Model)
Mode
Fan
Speed
SET
TEMP.
SET
TEMP.
Auto
Cooling Operation
SET
TEMP.
Soft
Operation
Dry Operation
(Cooling Model)
2
Troubleshtingp
Mode Button
How to
?
use
Each time the Fan
Mode
the Fan
speed
speed Button
Button is
pressed,
the Fan
speed
is shifted in the
arrow
direction.
Fan
Speed
High
8
Low
Cooling Operation Mode
3
Press the
1
Start/Stop
ENGLISH
Button.
On/Off
Select
2
Cooling Operation.Press the Operation
Operation Button on the remote controller.
Mode Selection Button. Press the
Cooling
Fan
Mode
Speed
A/CL
SET
TEMP.
Set the
3
The
temperature lower than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
Temp.
Fan
To raise the
To lower the
4
When you finish the
temperature
SET
TEMP.
temperature
temperature setting.
After 4 seconds
SET
TEMP.
Set the Fan
5
Mode
R00M
TEMP.
Speed.
Fan
Speed
High
Each time the Fan
Speed
9
Low
Speed
Button is
mode is shifted in the
arrow
pressed,
direction.
the Fan
SafetyPrcuions
OperatingIsuco
CarendMitc
Soft
4
1
Dry Operation
Press the
Start/Stop
Button.
On/Off
2
Select Soft
Press the
Press the
Mode
Dry Operation.
Operation Mode Selection Button.
Soft Dry Operation Button on the
remote controller.
Fan
Speed
A/CL
SET
TEMP.
3
Set the
The
temperature lower than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
Temp.
Fan
To raise the
To lower the
SET
TEMP.
temperature
temperature
During softy Dry Operation
Troubleshtingp
?
The indoor fan
Mode
speed
is
automatically
Fan
Speed
10
set to low and
can
be set fan
speed.
5
Jet Cool
1
Press the
Operation
Start/Stop
ENGLISH
Button.
On/Off
Press the Jet Cool button to
2
super
high
fan
speed
on
operate the speed cooling mode and the unit will operate in
cooling
mode.
Energy
Saving
Jet Cool
SET
TEMP.
JET COOL
To cancel the Jet Cool
3
room
or
mode, press the Jet Cool button again or the fan speed button or the
temperature setting button and the unit will operate in high fan speed on cooling mode.
or
NOTE:
During the JET COOL function at any moment, the A/C starts
extremely high speed setting the room temp. automatically to
cool the
to blow the cool air at
18°C. It is
especially
used to
temp. in the shortest time in a hot summer.
In heat pump mode or neuro fuzzy mode however, the JET COOL function is not available.
In order to return to the normal cooling mode from the JET COOL mode, you just press
either the operation mode selection button, airflow volume selection or temp. setting button
or
room
the JET COOL button
again.
11
SafetyPrcuions
OperatingIsuco
CarendMitc
Heating Operation Mode(Heat Pump Model Only)
6
1
Press the
Start/Stop
On/Off
Select
2
heating Operation.
Operation Mode Selection Button.
the Heating Operation Button on the remote
Press the
Press
Mode
controller.
Fan
Speed
A/CL
SET
TEMP.
Set the
3
The
temperature lower than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
Temp.
Fan
To raise the
To lower the
Set the Fan
Troubleshtingp
Button.
Mode
SET
temperature
TEMP.
temperature
Speed.
Fan
Speed
*
Each time the Button is
Speed
12
mode is shifted.
pressed,
the Fan
Electric Heater
7
1
Press the
Start/Stop
Operation Mode(Option)
ENGLISH
Button.
On/Off
2
Select
heating + E/heater Operation.
Operation Mode Selection Button.
Press the Heating Operation Button on the remote controller.(When the
Press the
Mode
unit
operates in heating mode.)
Fan
Speed
A/CL
SET
TEMP.
Set the
3
The
temperature lower than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
Temp.
Fan
Set the Fan
Mode
To raise the
temperature
To lower the
temperature
SET
TEMP.
Speed.
Fan
Speed
*
Each time the Button is
Speed
13
mode is shifted.
pressed,
the Fan
SafetyPrcuions
OperatingIsuco
CarendMitc
Troubleshtingp
8
Auto
Operation Mode(Cooling
Press the
1
Start/Stop
Model
Only)
Button.
On/Off
Select Auto
2
Operation.
Operation Mode Selection Button.
Auto Operation Button on the remote controller.
Press the
Press
Mode
Fan
Speed
A/CL
SET
TEMP.
Set the
3
The
temperature upper than the room temperature.
temperature can be set within a range of -2~2°Cby
Temp.
1 level.
Fan
SET
TEMP.
Cold
(This
Cool
Proper
Warm
Hot
indication will be shifted to the initial Auto Mode
To raise the
To lower the
Display
state after 4
seconds.)
temperature (When you feel too cool or cold)
temperature (When you feel too warm or hot)
During Auto Operation
?
It is
impossible to switch the
by fuzzy rule.
indoor fan
conditioner
14
speed
because of
being already
set to the best
Energy Saving Mode(Cooling Operation Only)
9
1
Press the
Start/Stop
ENGLISH
Button.
On/Off
2
Select
You
Energy Saving
can
Jet Cool
mode.
select this function
during
the
operation
of
Cooling/Auto/Soft Dry.
Energy
Saving
SET
TEMP.
3
To cancel the
operate
Jet Cool
on
Energy Saving mode, press
Cooling/Auto/Soft Dry mode.
the
Energy Saving
button
again
and the unit will
Energy
Saving
SET
TEMP.
Auto restart
In
case
the power
function to
comes on
again
after
a
power failure, Auto Restarting Operation is the
to the previous operating conditions.
operate procedures automatically
15
SafetyPrcuions
OperatingIsuco
CarendMitc
Fan
10
Press the
1
Mode
Start/Stop
(CL/HL/ZL MODEL)
Press Fan
2
Button.
On/Off
Operation
Button.
Fan
SET
TEMP.
Set the Fan
3
Mode
Speed.
Fan
Speed
Low
High
Each time the Fan
Fan
Speed
Button is
Speed
mode is shifted in the
2
louvers will
pressed,
arrow
the
direction.
Airflow Direction Procedure
11
Press the
1
Start/Stop
Press the Auto
Button.
Swing Button and
swing left and right.
On/Off
again
to set
the Vertical louver at the
A/CL
and
then
Press the Airflow Direction
Control Button
(Operation
Troubleshtingp
Operation
will start when the button is
desired airflow direction.
pressed,
stop when the button is pressed again.)
The vertical louver
swing
left and
right.
Note
Always
use
the remote control to
direction louver
by
hand could
adjust the right/left airflow direction, manually moving
change the air conditioner.
the vertical airflow
Vertical Airflow Direction Control
Adjust the
vertical airflow direction
manually by moving
16
the horizontal louvers with hand.
12
Plasma Air Purifying
Air
1
Procedure
(CA/HA/ZA MODEL)
ENGLISH
Purifying Operation only
Press the Plasma Air
1
Operation
Purifying Operation Start/Stop
Button.
Air
Temp.
Cleaning
A/CL
A/CL
(Operation
will start when the button is
Select Fan
2
The
and
stop when the button is pressed again.)
speed.
display
Mode
pressed,
shows low fan
speed
at the initial condition.
Fan
Speed
A/CL
A/CL
SET
TEMP.
SET
TEMP.
Low
High
?
You
dry
2
can
or
Air
operate the Plasma Air Purifying under the unit operation of cooling, heating, soft
Auto mode.
Purifying Operation
1. Press the
Start/Stop
2. Select the desired
Cooling
or
any other
Operateion.
Button.
Operation
3. Press the Plasma Air
4. Set the fan
with
Mode.
Purifying Operation
speed.
17
ON/OFF Button.
SafetyPrcuions
OperatingIsuco
CarendMitc
13
OFF Timer Setting
1
Press the
Start/Stop
Procedure(OFF TIMER Setting,
Button.
On/Off
Press the Timer Button.
2
A/CL
If you press the
?
?
3
If you select
'
button, the selected off timer is displayed
as
When you finish the Off Timer
setting,
the Timer indicator
lights
During off-timer operation
displayed.
off.
After 4
seconds
SET
TEMP.
4
follows;
', the Off Timer function will be cancelled.
After 4
seconds
Troubleshtingp
or
if you press the Timer
18
R00M
TEMP.
Button, the
rest time will be
CANCEL)
Child Lock
14
1
Operation
Procedure
Press the low and
The unit will
Temp.
high temperature setting
respond with beep.
buttons
simultaneously
for 3 seconds.
Fan
R00M
TEMP.
SET
TEMP.
After 3 seconds,
it will shifted.
2
During
Child Lock
After 3 seconds,
it will shifted.
Operation
Whenever you press any Button on Display Panel, it will
", which means Display panel is Locked.
immediately display
"
All the Button
But the Button
3
For
releasing
Temp.
Fan
on
the indoor unit
on
Display panel
will not work.
the remote controller will work.
child lock
Operation.
Press the low and
high temperature setting buttons simultaneously
again.
rospond with beep, Child Lock Operation will removed.
for 3 seconds
The unit will
R00M
TEMP.
SET
TEMP.
After pressing
the buttons
it will shifted immediately
After 3 seconds,
it will shifted.
19
ENGLISH
Care and Maintenance
CAUTION: Before
SafetyPrcuions
During the
Remove the Air Filter.
Take hold of the tab and
remove the filter.
Clean.
To remove the dust
?
?
cleaner,
or
Cleaning
pull slightly forward
Cleaning of the air cleaner.
Recommended about once every three months
?
filters, either use a
dry
in the
Don't wash with water.
?
Dip the air cleaner into the water mixed with
detergent, for 20~30minutes, and dry in the shade.
Re-insert the air cleaner to the original position.
Never
?
use
any of the
Water hotter than 40°C.
Could
cloth.
dry
pull slightly forward to
original position.
of the air conditioner
Wipe
soft
to the
wash them in water and
?
a
Remove the Air Cleaner.
Take hold of the tab and
remove the air cleaner.
to
Clean.
adhering
?
with
system.
season
shade.
Re-insert the filter to the
cause
deformation
followings.
Volatile substances.
?
Could
and/or discoloration.
damage the surfaces
of the air conditioner.
When the air conditioner is not going to be used for a long time.
At the end of the
At the start of the
season
Operate the air conditioner at the following
settings for 2 to 3 hours.
Type of operation : Cooling.
Temperature setting : 30°C.
This will dry out the internal mechanisms.
Clean the air
season
filters, re-insert, then operate
the air conditioner.
?
?
Remove the batteries from the Remote Control.
Be
sure
that
nothing
obstructs the air outlet
and intake vents.
Turn off the circuit breaker.
CAUTION
CAUTION
Turn off the circuit breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
Operation Tips
Do not overcool the
Troubleshtingp
turn off the main power to the
Cleaning of the air filters.
Recommended about once every two weeks
vacunm
OperatingIsuco
CarendMitc
performing any maintenance,
This is not
wastes
Make
good for
electricity.
sure
windows
Avoid
much
the
room.
your health and
shut
or
curtains closed.
when the air conditioner is in
Keep the
room
temperature uniform.
Adjust the vertical and
direction to
ensure a
operation.
temperature in the
Clean the air filter
Ventilate the
tight.
opening doors and windows as
as possible to keep the cool air in
room.
blinds
Do not let direct sunshine enter the
room
that the doors and
are
Keep
Blockages
airflow and lower
dehumidifying
once
regularly.
in the air filter reduce the
cooling
and
effects. Clean at least
every two weeks.
20
room.
occasionally.
room
Since windows
are
horizontal airflow
uniform
kept closed,
it is
a
idea to open them and ventilate
the room now and then.
good
Before you call for service...
Troubleshooting Tips! Save time and money!
?
Check the
following points
contact your dealer
or
before
requesting repairs
Case
Does not
or
service.... If the fault
See page
Explanation
operate.
persists, please
service center.
?
Have you made
?
Has the fuse blown
a
mistake in timer
operation?
has the circuit breaker been
or
tripped?
?
?
?
The
room
has
a
?
peculiar
seems
leaking
that condensation is
?
Check that this is not
Condensation
occurs
conditioner cools the
from the air
-
Heating Operation?
If yes, Hot-start is activating.
Is the unit in the Deicing?
If yes, wait for finishing the Deicing.
a
walls, carpet, furniture,
odor.
It
Is the power Switch at Off?
Is the unit at the starting of
damp
or
smell exuded
cloth items in the
by the
-
room.
when the airflow from the air
warm room
air.
-
conditioner.
Air conditioner does not
?
This is the Protection device of the air conditioner
operate for about
?
Wait about three minutes and
operation will begin.
If the airflow
temperature become
3 minutes
?
when restarted.
warm, it will
order to
it is
Does not cool
or
heat
?
begins
before its
cause an
undesired
cooling
prevent this, the airflow will
not
.
effect. In
begin
until
sufficiently warm.
Is the air filter
dirty?
See air filter
cleaning
20
instructions.
effectively.
?
The
room may have been very hot when the room
air conditioner was first turned on. Allow time for it
-
to cool down.
?
Has the
?
Are the indoor unit's air inlet
temperature been
set
incorrectly?
outlet vents
or
-
obstructed?
The air conditioner
is
operation
?
For
a
noise that sounds like water
-This is the sound of freon
noisy.
flowing
flowing.
inside the air
conditioner unit.
?
For
a
noise that sounds like the
compressed
air
-
into
atmosphere.
dehumidifying water being
processed inside the air conditioning unit.
releasing
-This is the sound of the
Remote controller
faint,
or no
display
display
at all.
is
?
Are the batteries
?
Are the batteries inserted in the
depleted?
opposite (+)
and
(-)
7
directions?
NOTE
WATER RESISTANT: The outdoor side of this
appliance
is WATER RESISTANT.
The indoor side is not water resistant and should not be
21
exposed
to
excess
water.
ENGLISH
Note
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising