LG LPC54 User guide
ENGLISH
DEUTSCH
FRANÇAIS
PORTUGUÊS
NEDERLANDS
SLOVENŠČINA
MODEL
LPC54 (LPC54)
ΕΛΛΗΝΙΚΑ
Please read this manual carefully before operating
your set and retain it for future reference.
ESPAÑOL
Portable CD Cassette
Recorder
ITALIANO
OWNER'S MANUAL
P/NO : MFL61543982
ENG.indd 1
2010.2.8 5:35:33 PM
LPC54_LGEDG-ENG
2/8/10
5:34 PM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these conditions could result in electric shock
or fire. Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized service.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
The marking of the apparatus is located on the bottom of the apparatus.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case
or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings be never
be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an
authorized service center. Use of controls, adjustments or the performance of
procedures other than those specified herein may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the apparatus.
2
This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment: Remove
the old battery or battery pack, follow the steps in reverse order than the assembly.
To prevent contamination of the environment and bring on possible threat to human
and animal health, the old battery or the battery put it in the appropriate container
at designated collection points. Do not dispose of batteries or battery together with
other waste. It is recommended that you use local, free reimbursement systems
batteries and accumulators.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop where
you purchased the product.
LG Electronics hereby declares that this/these product(s) is/are in
compliance with the essential requirements and other relevant
provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC.
European representative:
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel: +31-(0)36-547-8888)
LPC54_LGEDG-ENG
2/8/10
5:34 PM
Page 3
Power Source
2
1
1
CONTENTS
PAGE
Power Source
3
Main Unit
4
Listening to the Radio
4
Listening to CDs
5
Using a USB device
6
Listening to music from your portable player
6
Listening to cassette tapes
7
Recording to TAPE
7
Recording to USB
8
Setting the Clock
9
Troubleshooting
10
Specifications
10
Battery Installation
1. Press and open the battery cover.
2. Put six “C” (R14) batteries (not supplied) into the compartment making sure
the 3 and # are correctly positioned.
3. Replace the battery cover.
2
AC Power Cord Connection
1. Connect one end of the AC power cord (included) to the AC IN socket
located at the backside of your unit.
2. Plug the other end into the wall outlet.
Note:
• Unplug the AC power cord from the wall outlet if you do not to use for an
extended period of time.
• To avoid damage from possible battery leakage, remove the batteries if
you do not plan to use the unit for an extended period of time.
• When the batteries are weak, replace all the batteries with new ones.
• While the AC power cord connect to the wall outlet, the batteries are not
worn out.
• Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
LPC54_LGEDG-ENG
2/8/10
5:34 PM
Page 4
Main Unit
1
9
PORT.IN
The player can be used to play
the music from many types of
portable player.
10
Z PUSH OPEN
You can use it when inserting
or removing CDs.
7
2
8
9
3
11
TIMER
With the TIMER function you
can turn CD,USB and TUNER
on or off at a desired time.
10
11
4
Listening to the Radio
5
ON UNIT
6
1. Select FM or AM (optional)
2. Select the radio station
1
Handle
2
VOLUME Control
3
Headphone jack
A warning that excessive sound
pressure from earphones and
headphones can cause hearing
loss.
4
CLOCK
For setting the clock and
checking the time.
5
• 1/ ]
Power on/off
• x CLEAR/ PRESET - button
• EQ/
Sound quality adjustment
You can choose sound
impressions.
XDSS.
Extreme Dynamic Sound
System Reinforce the treble,
bass and surround effect.
4
ST/MONO- button
• . bb BACKWARD
BB > FORWARD
- SKIP/ SEARCH / TUNING /
TIME + button
• B/[] PRESET + button
• FUNCTION button
[CD, USB, TAPE, PORTABLE,FM, AM]
• z / X button
Recording (Recording to USB)/
Pausing
• REPEAT. SET. PROG- button
6
Use when playing a cassette
tape.
•
•
•
•
•
X
/Z
x/
m/M
b
z
7
ANTENNA
8
USB Connector
Pausing
Stop/ Eject
Searching
Playing
Recording
3. To ‘save’ a radio station:
A preset number will show in the display.
4. Select the preset number
5. To confirm press: Up to 50 radio stations can
be saved. (FM: 30, AM: 20)
6. To select a ‘saved’ station
FUNCTION
TUNING -/+
PROG PRESET -/+
PROG PRESET -/+
Listening to the radio - More you can do
Looking for radio stations automatically
1 Press and hold TUNING - / + on the unit for more than 0.5 second.
2 The tuner will scan automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold x CLEAR on the unit for two seconds. “CLEAR” shows.
2 Press x CLEAR on the unit to erase all the saved stations.
Improving poor FM reception
Press and hold ST/MONO- on the unit. This will change the tuner from stereo
to mono and usually improve the reception.
LPC54_LGEDG-ENG
2/8/10
5:34 PM
Page 5
Creating your own playlist
Listening to CDs
Audio CD and MP3/ WMA CD can be played back in this unit.
ON UNIT
1. Select the CD function
2. Open the CD door
FUNCTION
Z PUSH OPEN
3. Insert the CD : Label facing up.
4. Close the CD door
5. Start the CD playing
6. Stop a CD playing
B /[ ]
x
Listening to CDs - More you can do
Pausing or restarting a CD
1 Press B /[ ] on the unit during playback.
2 Press this button again to resume play.
Searching for a section within a track
Press and hold . bb / BB > during playback and release it at the point
you want to listen to.
Skipping to another track (file)
Press . bb / BB > on the unit.
You can play up to 40 tracks on a CD in order.
1 Insert a CD and wait for it to be read.
2 Press and hold PROG- in stop status.
3 Press . bb / BB > to select a track.
4 Press PROG- again to save and select a next track.
Repeat the step 3 - 4.
5 Press B / [ ] to play the programmed music files.
6 To clear your selection, press x twice.
Sound quality adjustment
You can choose sound impressions. Press EQ/XDSS. repeatedly, the display
changes in the following order,
NORMAL t ROCK t POP t CLASSIC t JAZZ t XDSS ...
About MP3/ WMA
MP3/ WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency: 32 to 48 kHz (MP3), 32 to 48 kHz (WMA)
• Bit rate : 32 to 320 kbps (MP3), 40 to 320 kbps (WMA)
• CD-R physical format should be “ISO 9 660/ JOLIET”
• If you record MP3/WMA files using the software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3
files.
We recommend that you use “Easy-CD Creator”, which creates an
ISO 9 660 file system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• On CD or USB, 99 folders and 999 track, function are support
Listening to your tracks (files) repeatedly or randomly
1 Press REPEAT. repeatedly.
Tracks will be played back repeatedly or randomly.
2 To return to normal playback, press REPEAT. repeatedly to select.
Note:
Depending on the conditions of the recording equipment or the CD-R/RW disc
itself, some MULTI SESSION, Mixed disc cannot be played on the unit.
5
LPC54_LGEDG-ENG
2/8/10
5:34 PM
Page 6
Listening to music from your portable player
Using a USB device
You can enjoy media files saved on a USB device by connecting the USB
device to the USB port of the unit. If you want to operate other function,
see the “Listening to CDs” section.
The unit can be used to play the music from many types of portable
player.
ON UNIT
ON UNIT
1. Connect the USB device to the USB port of
the unit.
2. Select the USB function.
3. Select a file you want to play.
4. Start your media playing.
5. Stop a media playing
6. Before disconnecting the portable USB
device, change to any other function.
-
FUNCTION
PORT. IN
. bb / BB >
B /[ ]
x
FUNCTION
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• The USB function may not be available depending on devices.
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
Look out for the following
• Do not extract the USB device in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1 000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• USB port of the unit can not be connected to PC. This unit can not be used
as a storage device.
6
1. Connect the portable player to the PORT.IN
connector of the unit.
2. Turn the power on.
3. Select the PORTABLE function.
4. Turn on the portable player and start it
playing.
1/ ]
FUNCTION
-
LPC54_LGEDG-ENG
2/8/10
5:34 PM
Page 7
Recording to TAPE
Listening to cassette tapes
ON UNIT
1. Select the TAPE function
2. Open the tape door
3. Insert the tape
4. Close the tape door
5. Start the tape playing
6. Stop a tape playing
Cassette deck will automatically stop at the
end of the tape
You can record a various sound sources to TAPE.
FUNCTION
x/Z
-
ON UNIT
2. Insert a blank tape and close the door.
-
3. Select a mode in which you want to record.
b
4. Play back a sound source first.
x/Z
Listening to the cassette tapes - More you can do
Playing Fast backward or Forward
x/Z
-
1. Open the tape door.
FUNCTION
B /[ ]
bz
5. Press
Recording starts.
x/Z
6. To stop recording, press
Synchronized Recording from CD to Tape
ON UNIT
1. Open the tape door.
x/Z
Press bb /BB on the unit during playback, or stop, press b (or x/Z ) at a
point you want.
2. Insert a blank tape and close the door.
-
3. Select the CD function (Audio CD only)
Pausing or restart a tape
4. Start the Recording:
The synchronized recording is started
automatically after about 7 seconds.
FUNCTION
bz
Press [] on the unit during playback. Press this button again to resume play.
5. To stop recording, press
x/Z
Note:
On recording, press [] to pause.
7
LPC54_LGEDG-ENG
2/8/10
5:34 PM
Page 8
When you are recording, look out for the following
Recording to USB
You can record a various sound sources to USB.
ON UNIT
1. Connect the USB device to the unit.
2. Select a mode in which you want to record.
Play back a sound source first.
3. Start the recording
FUNCTION
z/X
4. To stop recording, press
x
Recording to USB - More you can do
To set recording bit rate and speed
1 Press z / X on the player for longer than 3 seconds.
2 Use . bb/BB > on the player to select the bit rate among
96/128/192/256 Kbps. You can set the quality of the recoreded file.
3 Press z / X again to select the recording speed.
4 Use . bb/BB > to select a desired recording speed.
X 1 SPEED
- You can listen to music while recording it.
X 2 SPEED
- You can just recording the music file.
5 Press z / X to finish the setting.
NOTES :
On radio or portable mode, you cannot set the recording speed.
Recording Music file in disc source to USB
One track recording If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording If the USB recording on the CD stop status, all tracks/ files would be
recording.
Program list recording USB records after creating your own program if you want to record the track
you want. (Audio CD, MP3, WMA)
Pausing recording
During recording, press z / X to pause recording.
Press z / X to continue recording. (Only Radio, Portable)
8
• When you stop recording, the file that has been recorded at that time will
be stored.
• Do not remove the USB device or turn off the unit during USB recording. If
not, an incomplete file may be made and not deleted on PC.
• If USB recording does not work, the message like “NO USB”,
“ERROR”,“USB FULL” is displayed on the display window.
• Multi card reader device or External HDD can not be used for USB
recording.
• A file is recorded by about 510 Mbyte when you record for a long term.
• You may not record more than 999 files.
• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other sources
The making of unauthorized copies of copy-protected material,
including computer programs, files, broadcasts and sound
recordings, may be an infringement of copyrights and constitute
a criminal offense. This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
LPC54_LGEDG-ENG
2/8/10
5:34 PM
Page 9
Setting the Clock
ON UNIT
1. Turn the power on
2. Press for at least 2 seconds
3. Choose from either: AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
5. Select the hours
6. Press
7. Select the minutes
8. Press
The clock setting is finished.
1 /]]
CLOCK
. bb/BB >
Note:
• You have to turn off the unit to use the alarm function.
• If you disconnect the power cord or remove the batteries, the alarm
function is not available.
• If you set the clock time, you can check the time by pressing CLOCK even
when the player is turned off.
• If you set the clock time and alarm, you can check the alarm icon “
” by
pressing CLOCK even when the player is turned off.
SET.
. bb/BB >
SET.
. bb/BB >
SET.
Using your player as an alarm clock
1 Turn the power on.
2 Press and hold TIMER each function, EX) TUNER, CD.... flashes.
3 Press SET. when the function you want to be woken by is showing.
- If you choose “TUNER” you will be shown the stations you have saved as
presets. Use . bb/BB > on the unit to select the station you want,
Then press SET. on the unit.
4 Choose one of them by pressing SET..
5 Then you can set the time you want the alarm to go on.
Press . bb/BB > to change the hours and minutes and SET. to
save.
6 “OFF TIME” will be displayed. Then, you can set the time you want the
function to stop. Press . bb/BB > to change the hours and minutes
and press SET. to save.
7 You will be shown the volume (VOL) you want to be woken by.
Use . bb/BB > to change the volume and SET. to save.
The clock icon “
”shows that the alarm is set.
8 Press TIMER button 2times. You can check the setting status.
9
LPC54_LGEDG-ENG
3/2/10
3:54 PM
Page 10
Specifications
Troubleshooting
Symptom
Cause
Correction
POWER
No power
The power cord is not
plugged in.
The batteries are not
remaining.
Plug in the power cord.
The function switch is not
set to the Radio mode.
There are electronic
devices near the player.
Set the switch to the Radio
mode.
Set the player far from the
devices.
An unplayable disc is
inserted.
Insert a playable disc.
The disc is placed upside
down.
The disc is not placed
within the guide.
Place the disc with the
playback side down.
Place the disc on the disc
tray correctly inside the
guide.
The disc is dirty.
Clean the disc.
Record protect tabs are
removed.
Cover holes on back edge
of tape with tap.
Change the batteries with a
new ones.
RADIO
No sound
Some noise
occurs.
CD
The unit does
not start
playback
TAPE
Unable to
record
Designs and specifications are subject to change without notice.
10
General
Power supply
Power consumption
Net Weight
External dimensions (WxHxD)
Operating temperature
Operating humidity
Tuner
FM Tuning Range
AM Tuning Range (optional)
230 V ~ 50 Hz
20 W
2.75 kg
(398.5 x 188 x 300) mm
5 oC to 35 oC
5 % to 85 %
87.5 to 108.0 MHz or
87.50 to 108.00 MHz
522 to 1620 kHz or 520 to 1710 kHz
or 522 to 1710 kHz
Amplifier
Output Power
T.H.D
Frequency Response
Signal-to-noise ratio
2.5 W + 2.5 W
10 %
120 Hz to 18 kHz
50 dB
CD
Frequency response
Signal-to-noise ratio
Dynamic range
100 Hz to 18 kHz
55 dB
55 dB
Speakers
Type
Impedance
Rated Input Power
Max. Input Power
Net Dimensions (WxHxD)
Net Weight (1EA)
2 Way 2 Speaker
3Ω
3.0 W
6.0 W
(99.5 x 37 x 45) mm
135 g
USB
Version
BUS Power supply
1.1
DC 5 V
500 mA
ENG.indd 2
2010.2.8 5:35:34 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising