LG HT462DZ User guide

HT462DZ-D0_DAUTLLK_ENG_3980
DVD RECEIVER
OWNER’S MANUAL
MODEL: HT462DZ
HT462DZ-D0
SH42DZ-S
SH42DZ-W
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect
it from overheating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug
it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized servicer.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the plug is easily accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should
be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance
will help prevent potential negative
consequences for the environment and
human health.
4. For more detailed information about disposal
of your old appliance, please contact your
city office, waste disposal service or the
shop where you purchased the product.
This product is manufactured to comply
with the EEC DIRECTIVE 2004/108/EC
and 2006/95/EC.
Introduction
Maintenance and Service
Before use . . . . . . . . . . . .
Front Panel/Rear Panel . .
Remote Control . . . . . . . .
Maintenance and Service
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.3
.4
.5
.6
Handling the unit
Installation and Setup
TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .7
Optional Equipment Connection . . . . . . . . . . . .8
Antenna Connection . . . . . . . . . . . . . . . . . . . . .8
Assembling and Connecting to the Speakers .9
Speaker System Connection . . . . . . . . . . . . . . .9
HDMI Connection . . . . . . . . . . . . . . . . . . . . . .10
Displaying Disc Information on-screen . . . . . .11
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .11
General Operation . . . . . . . . . . . . . . . . . . . .11-13
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .11
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
LOCK (Parental Control) . . . . . . . . . . . . . . . .13
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Operation
General features . . . . . . . . . . . . . . . . .
Additional features . . . . . . . . . . . . . . .
Controlling the TV . . . . . . . . . . . . . . . .
Playing an Audio CD or MP3/WMA file
Programmed Playback . . . . . . . . . . . .
Viewing a JPEG file . . . . . . . . . . . . . .
Playing a DivX Movie file . . . . . . . . . .
Presetting the Radio Stations . . . . . . .
Listening to the Radio . . . . . . . . . . . . .
RDS Operation . . . . . . . . . . . . . . . . . . .
DVD Audio Discs . . . . . . . . . . . . . . . . .
Sleep Timer Setting . . . . . . . . . . . . . . .
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . .
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting input source . . . . . . . . . . . . .
XTS pro . . . . . . . . . . . . . . . . . . . . . . . .
VIRTUAL sound . . . . . . . . . . . . . . . . . .
Sound Mode . . . . . . . . . . . . . . . . . . . . .
Refer to the information in this chapter before
contacting a service technician.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray
near the unit.
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.14
.15
.15
.16
.16
.17
.18
.19
.19
.20
.21
.22
.22
.22
.22
.22
.22
.22
Reference
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The DVD/CD Receiver is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
Language Codes . . . . . . . . . . . . . . . . . . . . . . .23
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Troubleshooting . . . . . . . . . . . . . . . . . . . . .24-25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .26
3
Introduction
Before use
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference.
This manual provides information on the operation
and maintenance of your DVD/CD Receiver. Should
the unit require service, contact an authorized service
location.
About the
Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Symbol Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD±R, DVD±RW,
and CD-R or CD-RW that contains audio titles, MP3,
WMA, JPEG or DivX files.
Notes:
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs may not be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
Regional Code
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled as the
same as the rear of the unit or “ALL”.
Notes on Regional Codes
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
DVD
DVD
ACD
Audio CDs
MP3
MP3 files
WMA
WMA files
JPEG
JPEG files
DivX
DivX files
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from Digital Theater Systems,
Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital
Surround” are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2003 Digital Theater
Systems, Inc. All Rights Reserved.
4
Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
What is SIMPLINK?
Some functions of this unit are controlled by TV’s
remote control when this unit and LG TV with
SIMPLINK are connected through HDMI
connection.
• Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
• Refer to the TV owner’s manual for the details of
SIMPLINK function.
• LG TV with SIMPLINK function has the logo as
shown above.
• Use a higher version cable than 1.2A HDMI
cable.
Front Panel/Rear Panel
DISC Tray
OPEN/CLOSE button
Introduction
POWER
DISPLAY Window
VOLUME controller
TUNING(-/+)/SKIP/
./>
>)
SEARCH(.
AUDIO IN connector
STOP (x)
PAUSE (X)/
MONO/STEREO (ST.)
FUNC.(-)/PLAY(B)
USB port
Connect to a USB port of a memory
device (USB memory etc.)
Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
Remote sensor
Power Cord
SPEAKER connectors
FM Antenna connector
AUX AUDIO Input
(L/R) connector
OUTPUT (TO TV)
EURO AV socket
Connect to a TV with
SCART jack.
MONITOR
INPUT
L - AUX - R
HDMI OUT
Y
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
Cooling fan
OPTICAL IN connector
AM Loop Antenna connectors
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
Connect to a TV with Y PB PR inputs.
VIDEO OUT SELECTOR switch
HDMI OUT
HDMI output providing a high quality
interface for digital audio and video.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
5
Remote Control
POWER
TUNER
Selects the System’s tuner (FM and AM
bands).
AUX
Selects input source.
TUNER
Selects the output source (CD/DVD).
AUX
DVD
USB
PROG./MEMO.
USB
Plays the multimedia files.
OPEN/CLOSE
POWER
DIMMER
SOUND
S-TITLE
CLEAR
REPEAT A-B
MARKER
SEARCH
AUDIO
DIMMER
Changes brightness of the display
window on the front panel during in
power-on status.
REPEAT
+
SCAN +
PLAY
PAUSE/STEP
SKIP
STOP
TITLE
ZOOM
Selects the sound mode.
SETUP
MENU
DISPLAY
RETURN
ENTER
Repeats sequence.
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
MARKER
SEARCH
Displays MARKER SEARCH menu.
REVERSE/FORWARD SKIP
./>
>)
(.
TITLE
MENU
Accesses the menu on a DVD disc.
ZOOM
SETUP
Displays the disc’s Title menu, if
available.
SLEEP
Accesses or removes setup menu.
VOL
DISPLAY
MUTE
Accesses On-Screen display.
RETURN
Removes the setup menu.
x)
STOP (x
PLAY (B)
X)
PAUSE/STEP (X
VSM
XTS pro
Supplies more natural and realistic
sound.
Supplies great sound effect.
b/B/v/V (left/right/up/down)
Selects an option in the menu.
ENTER
PTY/HDMI
RDS/RESOL.
PRESET (-/+)
Selects programme of Radio.
SLEEP
Sets the System to turn off
automatically at a specified time.
MUTE
VOLUME (-/+)
TUN. (-/+)
Tunes in the desired radio station.
0-9 numerical buttons
Selects a subtitle language (DVD).
Searches backward or forward.
Reverse/ Forward slow playback.
REPEAT A-B
Selects a service, programme number
directly or selects numbered options in
a menu.
S-TITLE
SCAN/SLOW(bb/BB)
Repeats chapter, track, title, all
Acknowledges the menu selection.
Accesses or removes Program menu.
Enter a radio station’s frequency into
the tuner.
Marks a point during playback.
SOUND
REPEAT
PROG./MEMO.
CLEAR
SCAN
AUDIO
Selects an audio language (DVD) or an
audio channel (CD).
Z)
OPEN/CLOSE (Z
Opens and closes the disc tray.
DVD
Adjusts speaker volume.
POWER
PR
INPUT
PTY
To start a search for a specific PTY type.
HDMI
Switches the HDMI mode to HDMI
(active) and OFF (inactive).
Remote Control Operation Range
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote
sensor
Angle: About 30° in each direction in front of the remote sensor
VOL
RDS
Views the various displays of the
RDS options.
RESOL.
Changes the resolution depending on
your TV.
TV
Controls the TV. (LG TV only)
(See page15)
Remote control battery installation
Remove the battery cover on the rear of the
remote control, and insert two R06 (size
AA) batteries with
and
aligned
correctly.
Caution
Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).
6
Installation and Setup
TV Connection
Tips:
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/CD Receiver. Use one of the
connections described below.
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution:
Make sure the DVD/CD Receiver is connected
directly to the TV. Select the correct AV input on
your TV.
Do not connect your DVD/CD Receiver to TV via
your VCR. The DVD image could be distorted by
the copy protection system.
Rear of DVD/CD Receiver
MONITOR
INPUT
L - AUX - R
HDMI OUT
Y
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
V
VIDEO
INPUT
C
T
SCART INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Video connection
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable (V).
Component Video connection
Connect the COMPONENT VIDEO OUT jacks from
the DVD/CD Receiver to the corresponding jacks on
the TV using an Y PB PR cable (C).
SCART connection
Connect the EURO AV OUTPUT (TO TV) socket on
the DVD/CD Receiver to the corresponding jacks on
the TV using the scart cable (T).
Installation and Setup
Make one of the following connections, depending on
the capabilities of your existing equipment.
If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD/CD Receiver’s progressive scan output for the
highest video resolution.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
read owner’s manual for TV then set the resolution
that your TV can accept.
Notes:
The HDMI mode must be set to OFF for VIDEO
OUT and Component video connections.
A picture via scart input is not supported.
Caution
VIDEO OUT SELECTOR switch
In power-off state, select either
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) or SCART signal of
EURO AV TO TV terminal depending on how
to connect the unit to the TV.
L
Rear of TV
7
Optional Equipment Connection
OPTICAL IN connection (O)
Auxiliary device
DVD Player
(or Digital
Device, etc)
OUT
IN
VIDEO
AUDIO (L)
U
Connect an optical output of DVD Player (or Digital
Device etc) to the OPTICAL IN connector.
AUDIO IN connection (D)
AUDIO (R)
OPTICAL
Connect a output of portable device (MP3 or PMP etc)
to the AUDIO input connector.
OUT
To AUDIO OUT (L/R)
USB Memory, MP3 Player
(or Memory Card Reader, etc.)
A
To AV IN AUDIO (L/R)
O
MONITOR
INPUT
L - AUX - R
HDMI OUT
Y
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
To AUDIO IN
Rear of DVD/CD Receiver
D
USB connection (U)
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
To AUDIO OUT
Portable device
Removing the USB Device from the unit
1. Choose a different function mode or press STOP
(x) twice in a row.
2. Remove the USB device from the unit.
Notes:
Don’t extract the USB device while operating.
Music files (MP3/WMA), image files (JPEG) and
video files can be played.
This unit can not use a USB HUB.
Recommended Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
- Compatible with : FAT16, FAT32
- Only use the memory cards recommended.
Devices which require additional program
installation when you have connected the unit to a
computer are not supported.
In case of a USB HDD, make sure to connect an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive are
supported. If there is an extension partition, it will not
be supported.
If the drive of USB device is two or more, a drive
folder is displayed on the screen. If you want to
move to the initial menu after you select a folder,
press RETURN.
Digital cameras and mobile phones are not
supported.
AUX IN connection (A)
Connect a Output of auxiliary device to the AUX
AUDIO Input (L/R) Connector.
8
Antenna Connection
Connect the supplied FM/AM antenna for listening to
the radio.
Connect the AM Loop antenna to the AM antenna
connector.
Connect the FM Wire antenna to the FM antenna
connector.
Notes:
To prevent noise pickup, keep the AM Loop antenna away
from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM Wire antenna, keep it as
horizontal as possible.
AM Loop Antenna
(supplied)
FM Wire Antenna
(supplied)
MONITOR
INPUT
L - AUX - R
HDMI OUT
Y
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
Assembling the speaker stand
to the speaker
Before connecting the speakers, assemble the
speaker stand to the speaker as illustrated.
1
Post
Base
Hole 1. Fix the post to the
base by rotating the
post. And Draw the
speaker cord through
the hole on the base.
Speaker System Connection
Connect the speakers using the supplied speaker
cables.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Front speaker
(Right)
Front speaker
(Left)
2
Installation and Setup
2. Draw the speaker
cord through the hole
on the speaker. .
Subwoofer
3. Fix the speaker to the
stand by rotating the
speaker. Connect the
speaker cord to the
appropriate terminals
on the speaker.
3
Notes:
Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and
– to –. If the cables are reversed, the sound will be
distorted and will lack base.
If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
Notes:
Do not catch the speaker cord between the
speaker and the post
Do not drop the speaker when mounting.
9
HDMI Connection
Rear of DVD/CD Receiver
About HDMI
MONITOR
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
an easy all- digital output to an HDMI or DI-equipped TV.
INPUT
L - AUX - R
HDMI OUT
Y
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
Connection to an HDMI TV requires an HDMI cable
while connection to a DVI-equipped TV requires a DVI
adapter besides a HDMI cable.
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connector), and communication
between the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
If you have a HDMI TV or monitor, you can connect
it to this DVD/CD Receiver using a HDMI cable.
1. Connect the HDMI OUT jack on the DVD/CD
Receiver to the HDMI jack on a HDMI compatible
TV or monitor (H).
2. Set the TV’s source to HDMI (refer to owner’s
manual for TV).
3. In the stop mode, select HDMI mode by pressing
HDMI. Press RESOL. repeatedly to select the
resolution you wish to change.
Notes:
The arrow on the cable connector body should
face up for correct alignment with the connector on
the DVD/CD Receiver.
If HDMI cable is not connected, the HDMI button
does not operate.
If there is noise or there are lines
on the screen, please check
the HDMI cable.
Not all HDCP-compatible
DVI devices will work with
this DVD/CD Receiver.
If TV does not support HDCP, snow noise appears
on the screen, or picture may be vibrated.
Tip :
When you use HDMI connection, you can change the
resolution (480p or 576p, 720p, 1080i, 1080p) for the
HDMI output by pressing RESOLUTION on the
Remote Control.
H
HDMI
HDMI compatible TV
Resolution setting
You can change the resolution for the COMPONENT
VIDEO OUT by pressing RESOL. on the Remote
Control. Available resolution settings are as shown
below.
OUTPUT
CONNECTION
Available
PAL
1920 x 1080p
HDMI
1920 x 1080i
VIDEO OUT
1280 x 720p
720 x 576p
1920 x 1080i
COMPONENT 1280 x 720p
VIDEO OUT
720 x 576p
720 x 576i
MONITOR OUT 720 x 576i
SCART
720 x 576i
Resolution
NTSC
1920 x 1080p
1920 x 1080i
1280 x 720p
720 x 480p
1920 x 1080i
1280 x 720p
720 x 480p
720 x 480i
720 x 480i
-
Notes:
If the picture does not appear on the screen with
the analog video connections, change the
resolution to 480i (or 576i).
For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed at the 576p(PAL) 480p(NTSC) resolution.
1080p, 1080i, 720p, 576p and 480p does not work
with the analog video connections (MONITOR
OUT).
The component (Y/PB/PR) will output to black
picture in the RGB mode.
If you change the resolution, the display MENU
(MP3/JPEG/DivX) size is changed.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read owner’s manual for TV, and then set
the resolution that your TV can accept.
Caution:
Changing the resolution when the DVD/CD Receiver
is connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
DVD/CD Receiver and then turn it on again.
10
Displaying Disc Information
On - screen
GENERAL OPERATION
You can display various information about the disc
loaded on-screen.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
Title (Track) – Current title (or track) number/
total number of titles (or tracks).
Chapter – Current chapter number/total number
of chapters.
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles.
Sound – Selected sound mode.
3. Use v / V to select the second desired option and
then press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
LANGUAGE
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Note:
If any button is not pressed for a few seconds, the onscreen display disappears.
Move
Installation and Setup
1. Press DISPLAY to show various playback
information.
The displayed items differ depending on the disc
type or playing status.
1. Press SETUP. The Setup menu appears.
Select
OSD
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see the pages 11 to 13.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
Select a language for the Setup menu and then onscreen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in which
the disc was recorded.
Other – To select another language, press
numeric buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 23. If you enter the
wrong language code, press CLEAR.
11
DISPLAY
AUDIO
Each DVD disc has a variety of audio output options.
Set the receiver’s AUDIO options according to the
type of audio system you use.
DISPLAY
TV Aspect
16 : 9
Display Mode
Widescreen
Progressive Scan
Off
AUDIO
Move
DRC
On
Vocal
On
HD AV Sync
0 ms
Select
TV Aspect
Move
4:3 – Select when a standard 4:3 TV is connected.
Select
16:9 – Select when a 16:9 wide TV is connected.
Dynamic Range Control (DRC)
Display Mode
The display Mode setting works only when the TV
Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
With the DVD*1 format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). Then, you may
listen to a movie at a lower volume without losing
clarity of sound. Set DRC to On for this effect.
*1: Dolby Digital only
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
HD AV Sync
When using Digital TV.
Sometimes AV signal could not be transmitted
simultaneously because of later transmission of video
signal compared to audio signal.
Because it takes some time to convert analog video
signal to digital one in the Digital TV.
And It means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
In the HD AV Sync menu, you could adjust delay time
to audio signal for simultaneous AV signal
transmission
12
Delay time could be set up with 10msec unit.
(0 ~ 300ms)
Delay time is different according to each TV Brand.
So you need to adjust optimal delay time complying
with your TV.
Area Code
LOCK (Parental Control)
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 23.
LOCK
Rating
Unlock
Password
****
Area Code
US
US
1. Select “Area Code” on the LOCK menu then
press B.
2. Follow the step 2 as shown previous paragraph
(Rating).
Select
Rating
3. Select the first character using v / V buttons.
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
4. Press B and select the second character using
v / V buttons.
1. Select “Rating” on the LOCK menu then
press B.
5. Press ENTER to confirm your Area code selection.
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
OTHERS
OTHERS
C
Installation and Setup
Move
O
DivX(R)
Registration
PBC
Select
On
DivX(R) Registration
Select
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
Password
You can enter or change password.
1. Select Password on the LOCK menu and then
press B.
2. Follow the step 2 as shown above (Rating).
To change the password, press ENTER when the
“Change” option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the menu.
If you forget your password
Move
Select
DivX(R) Registration
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos based on the DivX® VOD service. For more
information, visit www.divx.com/vod.
1. Select “DivX(R) Registration” option and then
press B.
2. Press ENTER while “Select” is selected and the
registration code will appear.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.
3. Press ENTER to exit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
If you forget your password, you can clear it using the
following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press
ENTER. The password is cleared.
13
Operation
General features
Buttons
Operations
Z (OPEN / CLOSE)
Opens or closes the disc tray.
X (PAUSE)
During playback, press X to pause playback.
ALL
Press X repeatedly to play Frame-by-Frame.
DVD
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
ALL
SKIP (. / >)
Discs
ALL
DivX
Press SKIP . twice briefly to step back to the previous
chapter/track.
SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
DVD : bb, bbb, bbbb, bbbbb, bbbbbb or
BB, BBB, BBBB, BBBBB, BBBBBB
DivX disc : bb, bbb, bbbb, bbbbb or
BB, BBB, BBBB, BBBBB
WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8)
DivX
MP3
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Audio CD, DivX/MP3/WMA discs: Track/All/Off
ALL
REPEAT A-B
During playback, press REPEAT A-B to select a point A and
a point B and repeats a sequence from point A (Starting
point) to point B (End point).
Press REPEAT A-B to exit.
DVD
ZOOM
During playback or in the pause mode, press ZOOM to
enlarge the video image (3 steps).
You can move through the zoomed picture using b B v V
buttons.
DVD
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DVD
MENU
The disc menu appears on the screen.
DVD
During playback, press S-TITLE repeatedly to select a
desired subtitle language.
DVD
DivX
DVD
DivX
(SUBTITLE)
(AUDIO language) During playback, press AUDIO repeatedly to hear a different
audio language or audio track.
SLOW
14
DVD
ACD
In the pause mode, press SCAN (m or M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
DVD
WMA
Notes on general features:
Screen Saver
Zoom may not work on some DVDs.
The A-B repeat function is available only in the
current title.
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
1.5 times speed playback
DVD
ACD
MP3
WMA
You can play at 1.5 times speed.
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed on the disc.
1. During playback, press PLAY(B) to play at 1.5
times speed. “BX1.5” appears on the screen.
2. Press PLAY(B) again to exit.
Time Search
DVD
DivX
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Marker Search
DVD
DivX
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
DVD
This receiver memorizes the last scene from the last
disc that is viewed. The last scene remains in the
memory even if you remove the disc from the receiver
or switch off the receiver. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
Note:
This receiver does not memorize the scene of a disc if you
switch off the receiver before commencing to play the disc.
System Select
You must select the an appropriate system mode for
your TV system. If NO DISC appears in the display
window, press and hold X on the front panel or
PAUSE/STEP (X) remote control for more than 5
seconds to be able to select a system (PAL, NTSC).
When the selected system is not compatible with
the system of your TV, normal colour picture may
not be displayed.
NTSC: Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
Controlling the TV
Your remote control is capable of operating your
DVD/CD Receiver as well as limited functions of LG
TV.
Follow the instructions below to operate your LG TV.
Operation
Additional features
Last Scene Memory
Setting Remote Control Codes for LG TV
1. Hold POWER (TV) and press PR (-/+) button
repeatedly until the TV on or off.
2. The POWER (TV), PR (-/+), VOL (-/+) and INPUT
buttons on remote control are used to operate the
LG TV.
Note:
If the remote control does not operate your particular TV, try
the other code or use the remote control originally supplied
with the LG TV. (LG and Gold Star)
Due to the variety of codes used by manufacturers, OUR
COMPANY cannot guarantee that the remote control will
operate every LG TV model.
15
Playing an Audio CD or
MP3/WMA file
This unit can play Audio CDs or MP3/WMA files.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recording media or
Audio CD a menu appears on the TV screen.
Press v / V to select a track/file and then press PLAY
or ENTER, and playback starts. You can use variable
playback functions. Refer to the page 14.
ID3 TAG
When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. (Song, Artist, Album, Genre, Comment)
Tips:
Press MENU to move to the next page.
On a CD with MP3/WMA and JPEG, you can
switch MP3/WMA and JPEG. Press TITLE, and
MUSIC or PHOTO word on top of the menu is
highlighted.
MP3 / WMA disc compatibility with this player is limited
as follows:
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• The DVD/CD Receiver cannot read an MP3/WMA file
that has a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that cannot
create a file system (eg. Direct-CD) it is impossible to
playback MP3 / WMA files.We recommend that you use
Easy-CD Creator, which creates an ISO 9660 file
system.
• File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ? * : “
< > l etc.
• The total number of files on the disc should be less than
999.
This DVD/CD Receiver requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that permission is required in
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the copyright owner.
16
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program can contain 300 tracks.
1. Insert a disc.
Audio CD and MP3/WMA Discs:
2. Select a track on the “List” and then press PROG.
or select “
(Add)” icon and then press ENTER
to place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
Note:
You can add all tracks in the disc. Select “
then press ENTER.
(Add All)” icon
3. Select the track you want to start playing on the
“Program” list. Press MENU to move to the next
page.
4. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
5. To resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
Erasing a Track from “Program” List
1. Use v V to select the track that you wish to erase
from the Program list.
2. Press CLEAR. Alternatively, select “
(Delete)”
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks on the list.
Erasing the Complete Program List
Use v / V to select “
ENTER.
(Del all)” and then press
Note:
The programs are also cleared when the disc is removed.
Viewing a JPEG file
JPEG
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on the right.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
PHOTO
List
Preview
JPEG Folder 1
JPEG disc compatibility with this player is
limited as follows:
• Depending upon the size and the number of
JPEG files, it could take a long time for the
DVD/CD Receiver to read the disc’s contents. If
you don’t see an on-screen display after several
minutes, some of the files may be too large —
reduce the resolution of the JPEG files to less
than 2M pixels as 2760 x 2048 pixels and burn
another disc.
JPEG Folder 2
JPEG Folder 3
• The total number of files and folders on the disc
should be less than 999.
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
• Some discs may not operate due to a different
recording format or the condition of disc.
2. Press v / V to select a folder, and then press
ENTER. A list of files in the folder appears.
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
remote to highlight
and press ENTER.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this DVD/CD Receiver. Even
though the files are shown as JPEG image files in
Windows Explorer.
Tips:
There are four Slide Speed options
:
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use v /V /b /B to highlight the Speed. Then, use b / B
to select the option you want to use and then press
ENTER.
If you set Speed option to Off, the slide is not active.
Slide Show
(Slide Show) then
Operation
Use v V b B to highlight the
press ENTER.
Still Picture
1. Press PAUSE/STEP during the slide show.
The DVD/CD Receiver will now go into the PAUSE
mode.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
Moving to another File
Press SKIP (. or >) once during viewing a
picture to advance to the next or previous file.
Rotating the picture
Press v V b B during showing a picture to rotate the
picture clockwise or counter-clockwise.
17
Playing a DivX Movie file
Using this DVD/CD Receiver you can play DivX disc.
DivX disc compatibility with this player is limited
as follows:
1. Insert a disc and close the tray. The MOVIE menu
appears on the TV screen.
• Available resolution size of the DivX file is under
800x600 (W x H) pixel.
MOVIE
0:00:00
• The file name of the DivX subtitle is available by
45 characters.
List
Movie Folder 1
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the
display.
Movie Folder 7
Movie Folder 8
2. Press v / V to select a folder and then press
ENTER. A list of files in the folder appears. If you
are in a file list and want to return to the Folder
list, use the v / V buttons on the remote to
highlight
and press ENTER.
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or PLAY.
4. Press STOP to exit.
Notice for displaying the Divx subtitle
If the subtitle does not display properly during playback,
press and hold S-TITLE about 3 seconds then press
S-TITLE select another language code until the subtitle
is displayed properly
Tips:
Press MENU to move to the next page.
On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO and MOVIE
word on top of the menu is highlighted.
Notes:
Be sure to select “SUBTITLE ON” mode by
pressing the subtitle file every time before playing a
DivX file .
When the subtile has more than two languages in
the file, original subtile is only available.
You can not adjust sound mode and VIRTUAL
sound during the DivX file playing.
18
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
• If the video and audio structure of recorded
files are not interleaved, either video or audio
is outputted.
Playable DivX file
• ".avi ", ".mpg ", ".mpeg ", ".divx"
Playable Subtitle format
• SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Playable Codec format
• "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ",
"MP43 ", "3IVX ".
Playable Audio format
"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
Presetting the Radio Stations
Listening to the Radio
You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
Preset radio stations in the DVD/CD Receiver’s
memory first (see “Presetting radio stations” on the
left).
1. Press TUNER on the remote control until FM or
AM (MW) appears in the display window.
1. Press TUNER until FM or AM (MW) appears in the
display window.
3. Press and hold TUN.(-/+) for about two seconds
until the frequency indication starts to change,
then release.
Scanning stops when the DVD/CD Receiver tunes in a
station.
4. Press PROG./MEMO. on the remote control.
A preset number will flash in the display window.
5. Press PRESET (-/+) on the remote control to
select the preset number you want.
6. Press PROG./MEMO. on the remote control again.
The station is stored.
7. Repeat steps 3 to 6 to store other stations.
The last received station is tuned in.
2. Press PRESET (-/+) repeatedly on the remote
control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
remote control repeatedly.
To turn off the radio
Press POWER to turn the DVD/CD Receiver off or
select another function mode (DVD/CD, AUX, USB).
To listen to non-preset radio stations
Use manual or automatic tuning in the step 2.
For manual tuning, press TUN.(-/+) repeatedly.
For automatic tuning, press and hold TUN.(-/+) for
about two seconds on the front panel.
To tune in a station with a weak signal
Press TUN.(-/+) repeatedly in step 3 to tune in the
station manually.
To clear all the stored stations
Press and hold PROG./MEMO. for about two seconds
and “ERASE ALL” is appeared in the display window
and then press PROG./MEMO. again, the stations are
cleared.
If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
"ERASE ALL" will go off by itself and change to
normal mode.
Note:
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.
To select a preset radio station directly
You can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to the preset station 4, press 4
on the remote control. To listen to the preset station
19, press 1 and then 9 (within 3 seconds).
For your reference
If an FM program is noisy
Press MONO/ST. on the front panel to make
“STEREO” disappear in the display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the
stereo effect.
Operation
2. And then every time you press TUNER, FM and
AM (MW) changes alternately.
To improve reception
Reorient the supplied antennas.
19
RDS Operation
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
RDS, now being used in many countries, is a system
for transmitting station call signs or network
information, a description of station programme type
text message about the station or specifics of musical
selection and the correct time.
RDS TUNING
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station’s
call sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radio text (RT) and Clock Time (CT) if transmitted by
the station.
RDS DISPLAY OPTIONS
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
that appears when a station is first tuned. In normal
RDS operation the display will indicate the station
name, broadcast network or call letters. Pressing RDS
on the remote control enables you to cycle through
the various data types in the sequence:
(PS ↔ FREQUENCY ↔ PTY ↔ RT ↔ CT)
PS (Programme Service name)- The name of the
channel is shown in the Display Window.
PTY (Programme type recognition)- The name of
the programme type is shown in the Display
Window.
RT (Radiotext)- A “text” message contains special
information from the broadcast station. Note that
this message may scroll across the display to
permit message.
CT (Time controlled by the channel)- Enables
the unit to receive the actual time and show it in
the Display Window.
Note:
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not being transmitted, the
Display Window will show a PTY NONE, RT NONE,
CT NONE, or PS NONE message.
Programme Search (PTY)
A major benefit of RDS is its ability to encode
broadcasts with Programme Type (PTY) codes that
indicate the type of material being broadcast. The
following list shows the abbreviations used to
indicate each PTY along with an explanation of the
PTY.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM !
News
Current Affairs
Information
Sports
Educational
Drama
Culture
Science
Varied Speech Programme
Popular Music
Rock Music
Easy Listening Music
Light Music
Classical Music
Other Music
Weather Information
Financial Programmes
Children’s Programmes
Social Affairs Programmes
Religious Broadcasts
Phone-In Programmes
Travel and Touring
Leisure and Hobby
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary Programmes
Station Alarm Test Message
Emergency Broadcast Information
You may search for a specific Programme Type (PTY)
by following these steps:
1. Press TUNER to select the FM mode.
2. Press PTY on the remote control, the display will
show the last PTY in use.
3. Press PTY repeatedly to select a desired PTY.
4. When the PTY is selected, press TUN.(-/+).The
unit will go into an automatic search mode.
station is tuned, the search will stop.
20
When a
DVD Audio is a new disc format building on the
success of DVD to provide high quality,
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on the disc itself.
DVD Audio can provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound can be delivered with up to 24 bits of data
(compared to 16 bits for a standard CD).
A typical DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
used for music, either Advanced Resolution multichannel sound quality that is closer to the artist’s
master recording or for longer recordings. Many DVD
Audio discs contain on-screen text, such as artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
Moving to another GROUP
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1. Press DISPLAY during playback on in stop mode.
4 to select Group icon.
2. Press 3/4
3. Press 1/2 or the numbered buttons (0-9) to select
a group number.
Note:
Sometimes the author of the disc creates hidden
content that can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you’ll find it on the
disc’s jacket cover or on a web site). This password
control isn’t dictated by your DVD/CD Receiver — it is
a function of the disc.
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
Viewing another PAGE
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1. Press DISPLAY during playback.
4 to select Page icon.
2. Press 3/4
3. Press 1/2 to select a page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc was created.
Operation
DVD Audio Discs
Note:
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
21
Sleep Timer Setting
XTS pro
You can set the DVD/CD Receiver to turn off
automatically at a specified time.
Each time you press XTS pro the setting changes in
the following order.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and the sleep time appears in the
display window.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 →
40 → 30 → 20 →10 →OFF (No display)
Note:
You can check the remaining time before the DVD/CD
Receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
XTS-P ON y NORMAL
XTS-P ON
The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
NORMAL
XTS-P mode tune off
VIRTUAL sound
Press VSM to set the VIRTUAL sound.
Source
2.1 ch.
5.1 ch
Dimmer
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.
Selecting input source
You can use VCRs or other units connected to the
AUX IN, EURO AV connector or Optical connector.
Refer to the Owner’s Manual supplied with the unit for
further information on the operation.
Press AUX repeatedly on the remote control to
select the desired input source.
Each time you press this button, the mode of the
function changes in the following sequence:
AUX : for selecting the analog signal from AUX AUDIO
Input (L/R) Connector.
AUX OPT: for selecting the optical digital signal from
OPTICAL IN Connector.
TV-AUDIO: for selecting the TV audio signal from SCART.
AUDIO IN: for selecting the analog signal from AUDIO IN
Connector.
Notes
The Optical input function is available only when the
sampling frequency of other unit is 32 - 96kHz.
You can also select the input source by pressing
FUNC. button on the front panel.
Press and hold this button for about 3 seconds,
then press repeatedly to select other function.
22
Effect
3D STEREO
Virtual sound
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, the “MUTE” indicator flashes in
the display window.
Display
VIRTUAL
VIRTUAL
Virtual sound
A pending downmix technology converts 5.1
channel to 2 channel sound having directional
information of audio. And it makes a 2 channel or
2.1 channel feel 5.1 channel sound.
Sound Mode
You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the program you want to listen to. (2 ch. sound only)
Press SOUND button repeatedly.
ACD
MP3
WMA
BYPASS → ON STAGE → STUDIO → CLUB → HALL
→ THEATER 1 → CHURCH → BYPASS...
DVD
BYPASS → ON STAGE → BYPASS...
Note:
Initial sound mode is BYPASS.
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Area
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
FI
FR
DE
GB
GR
GL
Heard and McDonald Islands HM
Hong Kong
HK
Hungary
HU
India
IN
Indonesia
ID
Israel
IL
Italy
IT
Jamaica
JM
Japan
JP
Kenya
KE
Kuwait
KW
Libya
LY
Luxembourg
LU
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Reference
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
23
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
No power.
• The power cord is disconnected.
The power is on, but
the DVD/CD Receiver
does not work.
• No disc is inserted.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display
is lit.)
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input
mode on the TV so the picture from
the DVD/CD Receiver appears on the
TV screen.
• Connect the video cable into the
jacks securely.
• The video cable is not connected
securely.
• The connected TV power is turned off.
There is no sound or
only a very low-level
sound is heard.
The playback picture is
poor.
Loud hum or noise is
heard.
• Turn on the TV.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
• The audio cables are not connected
securely.
• Connect the audio cable into the
jacks securely.
• The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected
with the audio cable.
• The audio connecting cable is damaged.
• Replace it with new one.
• The disc is dirty.
• Clean the disc.
The DVD/CD Receiver • No disc is inserted.
does not start playback.
24
Correction
• Plug the power cord securely into the
wall outlet.
• Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display
is lit.)
• An unplayable disc is inserted.
• Insert a playable disc. (Check the
disc type, colour system and Regional
code.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
• The disc is not placed within the guide.
• Place the disc on the disc tray
correctly inside the guide.
• The disc is dirty.
• Clean the disc.
• A menu is on the TV screen.
• Press the SETUP button to turn off
the menu screen.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
• The disc is dirty.
• Clean the disc.
• The speakers and components are
connected poorly.
• Connect the speakers and
components securely.
• The DVD/CD Receiver is located too
close to the TV.
• Move your TV away from the audio
components.
The remote control
does not work
properly.
The front panel
display is too dim.
Correction
• Connect the antenna securely.
• Adjust the antennas and connect an
external antenna if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
• Tune in the station manually.
• No stations have been preset or preset
stations have been cleared (when
tuning by scanning preset stations).
• Preset the stations (page 19).
• The remote control is not pointed at the
remote sensor of the DVD/CD Receiver.
• Point the remote control at the remote
sensor of the DVD/CD Receiver.
• The remote control is too far from the
DVD/CD Receiver.
• Use the remote control within about 23
ft (7 m).
• There is an obstacle in the path of the
remote control and the DVD/CD
Receiver.
• Remove the obstacle.
• The batteries in the remote control are
flat.
• Replace the batteries with new ones.
• Nothing is displayed on the front panel
display.
• Press DIMMER on the remote control.
Reference
Cause
Symptom
Radio stations cannot • The antenna is positioned or connected
poorly.
be tuned in.
25
Specifications
Speakers
Amplifier
AM
[MW]
Tuner
FM
Video
CD/DVD
General
Power supply
Power consumption
Net Weight
External dimensions (W x H x D)
Operating conditions
Operating humidity
Laser
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
Video output
COMPONENT VIDEO OUT
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Stereo mode
Inputs
Outputs
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Refer to main label.
Refer to main label.
4 kg
430 x 70 x 305 mm
Temperature: 5°C to 35°C, Operation status: Horizontal
5% to 85%
Semiconductor laser, wavelength 650 nm
PAL 625/50, NTSC 525/60
240 Hz to 20 kHz
More than 75 dB (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter)
More than 70 dB
0.5 % (1 kHz, at 1W position) (20 kHz LPF)
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1/ SCART (TO TV)
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(PB)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 1
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
60 dB (Mono)
240 - 10000 Hz
522 - 1,620 kHz or 520 - 1,720 kHz
450 kHz
100 W + 100 W (4Ω at 1 kHz, THD 10 %)
Subwoofer*: 200 W (3Ω at 70 Hz, THD 10 %)
AUDIO IN, OPTICAL IN
MONITOR OUT, HDMI OUT, EURO AV (TO TV) OUT
COMPONENT VIDEO OUT
Front/Speaker
assive Subwoofer
(SH42DZ-S)
(SH42DZ-W)
2 Way 2 Speaker
1 Way 1 Speaker
4Ω
3Ω
100 - 20000 Hz
40 - 1500 Hz
82 dB/W (1m)
80 dB/W (1m)
100 W
200 W
200 W
400 W
300 x 1277 x 300 mm
165 x 422 x 415 mm
4.11 kg
7.23 kg
❋ Designs and specifications are subject to change without notice.
P/NO :MFL54563980