LG | LH-T551TB | User guide | LG LH-T551TB User guide

LG LH-T551TB User guide
STUHLINGER_LH-T551TB.NA9SSLD_ENG_149E
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-T551TB
(Main Unit: LH-T551
Speakers: LHS-55TBS, LHS-55TBC,
LHS-55TBW)
R
Before connecting up, operating or repairing
product, please read this instruction booklet
carefully and completely.
this
Safety
Precautions
About the
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
symbols
Indicates hazards
itself
for instructions
likely to cause
damage.
harm to the unit
other material
or
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
an
user
about the presence of uninsulated dangerous
within the product's enclosure that may be
voltage
of sufficient
magnitude
to constitute
a
risk of electric
shock to persons.
The exclamation mark within
is intended to alert the
important operating
an
accompanying
the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
CAUTION:
This DVD/CD receiver
To
ensure
proper
use
employs
of this
a
laser
system.
product, please
read this owner's
manual
unit
tion
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
equilateral triangle
about the presence of
and maintenance (servicing)
user
instructions in the instructions
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
carefully and retain it for future reference. Should the
require maintenance, contact an authorized service loca(see service procedure).
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radi-
OTES ON COPYRIGHTS:
It is forbidden
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
SERIAL NUMBER: The serial number is located on the back
of this unit. This number is unique to this unit and not available
to others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
___________________________________
ation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
Disposal
as
vases,
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
appliance
symbol is
product it means the product is
covered by the European Directive 2002/96/EC.
All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities.
The correct disposal of your old appliance will
help prevent potential negative consequences
attached to
CAUTION: The
(dripping
of your old
1. When this crossed-out wheeled bin
2.
3.
a
for the environment and human health.
4. For
detailed information about disposal of
appliance, please contact your city
office, waste disposal service or the shop where
you purchased the product.
more
your old
This
product
is manufactured to in
the radio interference
DIRECTIVE
73/23/EEC.
2
compliance
requirements of EEC
89/336/EEC, 93/68/EEC and
with
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
AudioCDandMP3/WMADisc...............21
Playing
an
Audio CD and MP3/WMA Disc
.
.
.
.
.
21
BeforeUse..............................4-5
Pause.............................21
PlayableDiscs...........................4
MovingtoanotherTrack...............21
RepeatTrack/All/Off...................21
Precautions.............................5
NotesonDiscs..........................5
Search.............................21
AboutSymbols..........................5
FrontPanelandRearPanel..................6
JPEGDiscOperation......................22
ViewingaJPEGdisc.....................22
RemoteControlOverview....................7
SlideShow.........................22
StillPicture.........................22
Preparation
Connections............................8-11
TVConnections.........................8
OptionalEquipmentConnections
.
.
.
.
.
.
.
.
.
.
.
.9
AerialConnections........................9
10
Assembling and Connecting to the Speakers
.10
ToHangtheCentreSpeakeronawall.
SpeakerSystemConnection...............10
SpeakerPositioning......................11
BeforeOperation.......................12-17
Mini Glossary for Audio Stream & Surround
.
.
.
.
.
.
.
.
.
Mode.................................12
SoundMode...........................12
On-ScreenDisplay.....................13
InitialSettings........................14-17
GeneralOperation....................14
Language..........................14
Display..........................14-15
Audio..............................15
Lock(ParentalControl)................16
Others.............................17
Operation
DVDorVideoCDOperation...............17-20
PlayingaDVDandVideoCD...............17
GeneralFeatures.....................18-20
MovingtoanotherTITLE/GROUP.
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
.
.18
.
18
SlowMotion.........................18
Still Picture and
Frame-by-Frame Playback
.
18
Search.............................18
Repeat............................18
RepeatA-B.........................19
TimeSearch........................19
MarkerSearch.......................19
Zoom..............................19
SpecialDVDFeatures....................20
TitleMenu..........................20
DiscMenu..........................20
ChangingtheAudioLanguage.
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.20
.20
Subtitles...........................20
DVDAudioDiscs........................20
Movingtoanotherfile.................22
Torotatepicture......................22
ProgrammedPlayback.....................23
RepeatProgrammedTracks................23
.23
ErasingaTrackfromProgrammeList
the
List
23
Erasing
Complete Programme
DivXDiscOperation.......................24
SpeakerSetup............................25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................26
LastConditionMemory...................26
ScreenSaver...........................26
SystemSelect..........................26
ControllingtheTV.......................26
OperationwithRadio....................27-28
Presettingtheradiostations................27
Listeningtotheradio.....................27
RDSTuning............................28
RDSDisplayOptions.....................28
OtherFunctions...........................29
SleepTimerSetting......................29
Dimmer...............................29
Mute.................................29
UsingtheHeadphoneJack................29
SelectingtheInputSource.................29
XTS(ExcellentTrueSound)................29
XTSpro...............................29
Reference
LanguageCodeList.......................30
CountryCodeList.........................30
Troubleshooting........................31-32
Specifications............................33
Introducin
Before Use
Playable
Discs
ote
When
DVD
playing back such discs, adjust the
gradually, and keep the volume level low. To
enjoy DTS Digital Surround playback, an external 5.1
channel DTS Digital Surround
decoder system must
be connected to the digital output of the unit.
TM
TM
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
Disc-related terms
(8cm/12cmdisc)
SVCD and CD-R
or
MP3, WMA, JPEG
DVD-RW, DVD+RW,
CD-RW that contains audio titles,
or
play
CDs, excessive audio level
volume
(8cm/12cmdisc)
can
DTS-encoded
volume before
DVD audio discs
addition, this unit
DTS-encoded CDs
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
(8cm/12cmdisc)
In
on
playing
a
DivX files.
Title
(DVD only)
The main film content
accompanying
or
feature content
additional feature content, or music album.
Each title is assigned a title reference number
or
you to locate it
enabling
easily.
otes
Depending
on
the conditions of the
the CD-R/RW
ment
or
itself,
some
cannot be
CD-R/RW
played
on
recording equip(or DVD-RW, DVD+RW) disc
(or DVD-RW, DVD+RW) discs
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
or
irregularly shaped
octagonal). It may result in
use
CDs
(the
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
(e.g., heart-shaped
malfunctions.
Group (DVD
audio discs
The main audio content
otes
on
DVDs and Video CDs
playback operations of DVDs and Video CDs
be
may
intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
or
other functions may be added.
sure to also refer to the instructions
Make
supplied
with
the DVDs and Video CDs. Some DVDs made for business
purposes may not be able to be
played
on
the
unit.
Regional
code of the DVD/CD receiver and DVDs
This DVD/CD Receiver is
designed
and manufactured for
playback of region "2" encoded DVD software.
region code on the labels of some DVDs
2
indicates which type of player can play those
discs. This unit can only play DVDs labeled "2"
or "ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
The
only)
accompanying
feature
con-
additional feature content, or music album. Each
group is assigned a group reference number enabling
you to locate it easily.
tent
Some
or
or
Scene
On
(VCD)
Video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
of Video CDs
Types
There
are
two
types of Video CDs:
Video CDs
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
functions, or other
still pictures
Moreover,
typical computer-like operations.
of
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be disturbed
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
or
or
turn off the
volatile
liquids,
contact with the unit for
leave marks
Cleaning
such
as
a
use a
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
a
clean
quality.
cloth. Wipe
Before
distort the
can
picture
clean the disc
playing,
the disc from the centre out-
wards.
on
a
insecticide spray,
or
long period
plastic products in
of time. They will
the surface.
the unit
To clean the cabinet
Use
Cleaning
temperature
the exterior surfaces clean
use
the unit. Do not leave rubber
near
radio,
as there may be a considerable
increase inside the car.
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzene,
or
use
thinner,
are
moistened with
lightly
strong
as
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for
About
vinyl
records.
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD Receiver is
a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
If the
may appear on the TV screen during operation.
This icon means the function explained in this owner's
manual is not available
About the disc
on
Discs
DVD-V
DVD-A
Disc
Handling
VCD2.0
Hold the disc
on
will not
VCD1.1
the surface.
Do not stick paper
that
symbols
specific
DVD-Video disc.
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD and finalized DVD±R/RW.
DVD Audio discs.
Video CDs with the PBC
(playback control)
function.
Do not touch the
get
playback side of the disc.
by the edges so that fingerprints
on
A section whose title has
applicable only
Notes
symbol display
""
Video CDs without the PBC
(playback control)
function.
or
tape
on
the disc.
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
DivX
DivX disc.
5
Introducin
Front Panel and Rear Panel
PHONES connector
STANDBY/ON
STANDBY indicator
DISC
Lights red when the receiver
is in Standby mode (off).
Tray
FUNCTION/PLAY
Press and hold down this button about 3
seconds, then press repeatedly
to select
other function.
VOLUME controller
DISPLAY Window
OPEN/CLOSE button
Remote
sensor
USB host
Connect to
a
USB
MONO/STEREO/
port of
PAUSE/STEP
multimedia
(USB
memory
etc.)
TUNING(-/+)/SKIP(-/+)
buttons
STOP
OUTPUT
Power Cord
(TO TV)
EURO AV socket
SPEAKER connectors
Connect to
FM Antenna connector
SCART
a
TV with
jack.
L
AUDIO
R
8
AM
8
8
Loop
8
8
Antenna connectors
S-VIDEO OUT connector
MONITOR OUT connector
VIDEO OUTPUT SELECTOR
COMPONENT VIDEO OUT terminals
Connect to
a
TV with Y Pb Pr
AV IN AUDIO
switch
inputs.
Input (L/R)/VIDEO
Select either COMPONENT
IN
connectors
Do not touch the inner
panel. Electrostatic
damage to the unit.
6
pins of the jacks on the rear
discharge may cause permanent
VIDEO OUTPUT
or
SCART
signal of EURO AV terminal
depending on how you
connected the DVD/CD
Receiver to the TV.
Remote Control Overview
POWER
OPEN/CLOSE
Opens
DVD
Select the
output
source
(CD/DVD)
or
Selects
DVD
tuner
(FM
To control the TV.
directly
and AM
AUDIO
SOUND
MRAKER
-
SEARCH
an
audio
an
language (DVD) or
(CD).
PRESET/
Marks
CH
Selects the TV's
b/B/v/V
.
Selects
MENU
SCAN
or
REVERSE
playback.
Displays the disc's Title
VOLUME
To
radio station's
Starts
RDS
PTY
the tuner.
track number
on
the
program menu or a mark
MARKER SEARCH
on
the
a
(B)
playback.
Pause
playback
STOP
(x)
(X)
the DVD video
Enlarges
image.
DIMMER
Press to change brightness of the
display window on the front panel during in power-on status.
REPEAT
all.
USB
REPEAT A-B
Repeats
menu, if available.
ZOOM
menu.
Repeat chapter, track, title,
Radio.
Stops playback.
CLEAR
Removes
or
(+/-)
PAUSE/STEP
into
frequency
selection.
adjust speaker volume and TV volume.
PLAY
menu.
MEMO.
a
menu
To tune in the desired radio station.
PROG.
Enter
the
TITLE
SKIP(>)
Program
menu.
SKIP
forward*/go to next
chapter or track.
or removes
in the
Select programme of TV
backward*/go to beginning of
current chapter or track or go to
previous chapter or track.
Accesses
option
TUN(-/+) (b/B):
Search
Search
an
PRESET/CH(+/-) (v/V):
SKIP(.)
FORWARD
source.
(left/right/up/down)
Acknowledges
forward.
SLOW-/+(t/T)
Reverse/ Forward slow
display.
ENTER
SCAN-/+(bb/BB)
Search backward
menu.
INPUT
DVD disc.
menu on a
MARKER SEARCH
Accesses On-Screen
-
Accesses the
menu.
DISPLAY
SETUP
menu
setup
point during playback.
a
Displays
+
..
SOUND MODE
setup
language (DVD).
SEARCH
audio channel
or removes
subtitle
a
MARKER
Selects the sound mode.
Accesses
automatically.
speakers.
Removes the
AUDIO
Selects
off
RETURN
sound effect.
enjoy great
System to turn
specified time.
Selects
SUBTITLE
XTS
To
a
SUBTITLE
XTS pro
sound.
at
Mute the
natural and realistic
more
only)
MUTE
service, programme number
select numbered options in a
a
enjoy
TV
Set the
MUTE
menu.
To
(LG
SLEEP
bands)
or
source.
SLEEP
0-9 numerical buttons
Select
input
TV
BAND
System's
tray.
AUX
accesses
Select the
(Z)
and closes the disc
To
enjoy
the multimedia files.
sequence.
RDS
To view the various
displays of the
RDS options.
PTY
To start
a
search for
a
specific
PTY
type.
Remote Control
Remote control
Operation Range
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote sensor
Angle:
About 30° in each direction in front of the remote
sensor
Remove the
remote
new
batteries. Never mix different
battery
AAA) batteries
correctly.
types of batteries (standard, alkaline, etc.).
with
installation
cover on
control, and insert
Caution
Do not mix old and
battery
the
rear
two R03
and
of the
(size
aligned
Introducin
Connections
TV Connections
Make
of the
one
following connections, depending
capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT
on
the
jacks,
Progressive Scan (ColorStream pro)
connection
If your television is
set the VIDEO OUT SELECTOR switch to
COMPONENT. When
using
the SCART
jack,
VIDEO OUT SELECTOR switch to SCART.
video resolution
ips
Depending
to
on
your TV and other equipment you wish
are various ways you could connect
one
of the connection
methods described below.
best connections.
"digital ready"
possible.
Connect the COMPONENT VIDEO OUT jacks from the
DVD/CD Receiver to the
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
or
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD Receiver.
connect, there
the DVD/CD Receiver. Use
high-definition
a
television, you may take advantage of the DVD/CD
Receiver's progressive scan output for the highest
set the
TV
using
an
optional
corresponding in jacks
(C).
on
the
Y Pb Pr cable
Rear of TV
Caution
Make
the DVD/CD Receiver is connected
sure
to the TV. Select the correct AV
directly
your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
input
on
VIDEO
INPUT
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
SCART INPUT
Pr
L
protection system.
S-Video connection
Connect the S-VIDEO OUT
Receiver to the S-VIDEO IN
S-Video cable
jack on the DVD/CD
jack on the TV using
the
(S).
V
S
C
T
Video connection
Connect the MONITOR OUT
from the DVD/CD
Receiver to the VIDEO IN
the TV
video cable
jack
jack on
using
the
supplied (V).
SCART connection
Connect the EURO AV OUTPUT
DVD/CD Receiver to the
TV
using
the scart cable
(TO TV) socket on the
corresponding in jacks on the
(T).
L
AUDIO
R
Component
Video
(Color Stream )
connection
Connect the COMPONENT VIDEO OUT
DVD/CD Receiver to the
TV
using
an
Y Pb Pr
corresponding
cable (C).
jacks from the
jacks on the
in
Rear of DVD/CD Receiver
otes
Set the
Progressive to "On" on the Setup
progressive signal, see page 15.
Set the
progressive
to "Off"
by removing
from the unit and close the disc
tray.
disc" is
window.
displayed
on
the
display
see
STOP and hold it for five seconds before
Progressive
scan
video connections
does not work with the
(yellow
S-VIDEO connection.
8
VIDEO OUT
menu
for
any disc
that "no
Then, press
releasing
analog
jack) or
it.
Connections
(Continued)
Optional Equipment
1
2
Connect
a
Connections
VCR to the AV IN connectors.
Connect the USB
port of
a
USB
MP3
Memory (or
player, etc.)
to the USB HOST
on
the front of the unit.
Prepa tion
Rear of VCR
Front of DVD/CD Receiver
IN
OUT
VIDEO
AUDIO
(L)
AUDIO
(R)
To AUDIO OUT
(L/R)/
VIDEO OUT
USB
Memory, MP3 Player (or
Memory Card Reader, etc.)
To AV IN AUDIO
(L/R)/
VIDEO
L
AUDIO
R
88
888
otes
If the audio format of the
produce
a
digital output does not match the capabilities of your DVD/CD Receiver, the receiver will
strong, distorted sound or no sound at all.
The DivX files in your memory card will not be able to be
play.
Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
Loop aerial to the AM aerial connector.
Connect the AM
Connect the FM Wire aerial to the FM aerial connector.
AM
FM Wire aerial
Loop
aerial
(supplied)
(supplied)
L
AUDIO
R
88
888
otes
To
prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components.
Be
sure
After
to fully extend the FM wire aerial.
connecting the FM Wire aerial, keep
it
as
horizontal
as
possible.
9
Connections
and
Assembling
the
(Continued)
Connecting
to
Speakers
The front and
rear
speakers
assemble the front and
stands
as
Connection
Connect the
the
speakers using
supplied speaker
cords.
are
detached from the
stands. Connect the
speaker
Speaker System
rear
speaker
speakers
cords and
from
To obtain the best
possible surround sound, adjust
speaker parameters (volume, distance, etc.).
speaker
illustrated.
Front
speaker
(Left)
Front
Connect the
nals
on
After
speaker
(Right)
appropriate termirear speaker.
speaker cords to the appropriate
speaker
the
cords to the
the bottom of each front and
connecting
terminals
on
the
the bottom of each front and
speaker and attach the
the speaker stands.
front and
rear
rear
speakers
to
Rear speaker
(Right surround)
Rear speaker
(Left surround)
Center
8
8
speaker
8
8
8
Subwoofer
ote
You cannot detach the
bling
To
the front and
hang
rear
speaker from
speakers.
the centre
the stand after
speaker
assem-
on a
wall
You
1
2
can
hang
the Centre
Detach the stand
Speaker
on a
by rotating the
Speaker.
wall.
screw on
the
bottom of the Centre
Attach the stand
rear
by rotating
Speaker.
the
screw on
the
of the Centre
otes
Be
sure
terminal
are
it via hole
Hang
3 Speaker
on
the
on
the
screw.
rear
side of the Centre
on
the
cable to the
speaker
components:
+
to
+
and
--
appropriate
to
--.
If the cables
reversed, the sound will be distorted and will lack base.
If you
use
adjust the
speakers.
Do not
10
to match the
front
speakers with
carefully to
volume
remove
the front
cover
low maximum
input rating,
avoid excessive
of
output
supplied speaker.
on
the
Connections
(Continued)
Speaker Positioning
In the
of normal
case
position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subplay the excellent bass sound, DTS digital surround or Dolby Digital surround, you should
If you want to
connect a subwoofer.
woofer).
?
?
Front speakers
According to your listening position
speakers to 45 degree.
Centre
speaker
speakers
The centre
?
and front
set up the
speakers
are
for
speakers
ideally
the
equal
same
distance. And
height.
But
by hearing position
normally place
it above
or
set up the interval between
below the television.
Rear
speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
size, if the audience is
room
-
90
cm
than the listener 's
near
to the
rear
wall set the
rear
each
speakers opposite
other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Front Speaker
(Right)
Speaker
(Left)
Speaker
(Left)
Rear Speaker
(Right)
Speaker Positioning Example
About Ferrite Core
Be
sure
cables
(OPTIONAL)
to attach the ferrite
(for connecting
This ferrite
core
to this
Press the
speaker
reduce noises.
core can
How to attach the ferrite
1
to the
unit).
core
stopper [a] of the ferrite
core
to
open.
2
Wind the cable
once on
the ferrite
core.
The
88
3
Close the ferrite
core
888
length
short
as
here is
much
as
possible.
unitl it clicks.
ote
Attach the ferrite
and
core near
the unit
(Refer
to the
fig.3
comment.).
11
Prepa tion
Before
Mini
Operation
for Audio Stream &
Glossary
Surround mode
Sound Mode
You
DVD
VCD2.0
VCD1.1
CD
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Allows you to
enjoy 5.1(or 6)
discrete channels of
high
audio from DTS program sources such as
DVD and compact discs, etc.bearing the trade-
quality digital
discs,
mark. DTS
Surround delivers up to 6 channels of
means identical to the original
Digital
transparent audio(which
and results in exceptional clarity throughout a
degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under
license from DTS Technology, LLC.
masters)
true 360
When DVD is inserted
You
can change the Digital Audio Output mode by
pressing the AUDIO button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
this feature is used.
After you select 2 channel
a)
3 ENG
D
2CH
button
Bypass
Dolby Digital surround format lets you enjoy up to
digital surround sound from a Dolby
Digital program source. If you play DVDs with
mark, you can enjoy even better sound quality, greater
spatial accuracy, and improved dynamic range.
AUDIO
) by pressing
repeatedly.
(For example
2 ENG
D
2CH
or
button, press SOUND
Music
Movie
Matrix
The
5.1 channels of
"
"
After you select 5.1 channel
b)
(For example
1 ENG
D
5.1 CH
or
4 ENG
DTS
) by pressing
5.1 CH
"
-"
-
AUDIO
indicator will be
"BYPASS" indicator
button, press SOUND button.
displayed on the TV screen.
will be only displayed on the display
window.
(II)
Dolby
Pro
Logic
II creates five full-bandwidth
channels from two-channel
an
advanced, high-purity
sources.
output
This is done
using
matrix surround decoder that
extracts the
without
spatial properties of the original recording
adding any new sounds or tonal colorations.
MOVIE mode:
Each time you press SOUND button, the sound mode
of Video CD is changed on the display window in the
following order.
BYPASS
STUDIO
CLUB
HALL
THEATER 1
CHURCH
PL ll MOVIE
PL ll MUSIC
PL ll MTRX
BYPASS...
→
→
→
→
use
quality
of discrete 5.1-channel sound.
MUSIC mode:
The Music mode is for
use
with any stereo music
ote
After you select the "Bypass" of sound mode by
pressing SOUND button, press AUDIO button.
The
Left, Right and Stereo of audio channel will be
displayed
on
the TV
screen.
When CD is inserted
recordings.
MATRIX mode:
The Matrix mode is the
same as
Each time you press SOUND button, the sound mode
of Audio CD is changed on the display window in the
the Music mode
order.
except that the directional enhancement logic is
following
turned off. It may be used to enhance mono signals
by making them seem "larger." The Matrix mode may
BYPASS
STUDIO
CLUB
HALL
THEATER 1
CHURCH
PL ll MOVIE
PL ll MUSIC
PL ll MTRX
BYPASS...
also find
use
→
→
with stereo television
shows and all programs encoded in Dolby Surround.
The result is enhanced soundfield directionality that
the
→
→
→
The Movie mode is for
approaches
When Video CD is inserted
in auto
systems, where the fluctuations
from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The
ultimate "cure" for poor FM stereo
simply to force the audio to mono.
reception
may be
→
→
You
BYPASS
-
to the way it
was
→
→
→
identify the encoding format of program
by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
can
software
-
played according
→
→
For your reference
?
-
Software with multichannel surround audio
→
→
signals
recorded.
is
ote
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
12
Before
Operation (Continued)
On-Screen
You
use
the
Some items
screen.
To
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
Display
the
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
Title Number
1/3
b /
B,Numbers
ENTER
1
2
Press DISPLAY
during playback.
Chapter
Press v / V to select
The selected item is
an
Number
1/12
b /
Time search
highlighted.
3
use
change
the
the number buttons if
inputting
the title
setting. You can
appropriate (e.g.
number).
For
press ENTER to execute the
some
also
0:20:09
Numbers, ENTER
A-B
Repeat
title
Repeat
sequence
Resume
Action
play
language
Digital Audio
Output mode
b/Bor
and
AUDIO
functions,
Subtitle
setting.
language
A BC
SUBTITLE
prohibited
or
point
Selection Method
Items
Track Number
If
no
button is
screen
provide
all of the features
pressed for 10 seconds,
display disappears.
b/B
Bypass
Example: On-Screen Display during
playing VCD
not available
otes
Some discs may not
shown below.
b/B
1/3
Sound
from this
b/Bor
1 ENG
Angle
PLAYBACK STATUS/RESTRICTIONS
Title
Prepa tion
ENTER
item.
Audio
Press b / B to
B,Numbers
the
on-
(or
PBC
1/3
b /
B,Numbers
ENTER
mode)
Numbers
Time search
0:20:09
ENTER
b/Bor
Audio Channel
AUDIO
Sound
Bypass
b/B
Example: On-Screen Display during
playing DVD Audio
Selection Method
Items
Group
b /
Number
ENTER
b /
Track Number
0:20:09
Audio
language
Digital Audio
Output mode
Display only
b/Bor
and
language
B, Numbers
ENTER
Time search
Subtitle
B, Numbers
AUDIO
OFF
ABC
Display only
b/B
Page (or Angle)
or
1/3
13
Before
Initial
Operation (Continued)
LANGUAGE
Settings
the Setup menu, you can make various adjustments to items such as picture and sound. You can also
By using
LANGUAGE
language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
set
a
item,
To
see
Press SET UP to
display
the
menu.
on
General
B to
screen
selected
5
Select
Setup
menu
and
option
then
as
disc
to the second level.
well
as
alternate
setting
setting(s).
Use v / V to select the second desired
then press B to
move
for the
option
to the third level.
Use v / V to select the desired
setting
PLAY to exit the
was
Refers to the
display.
DVD-A
audio track
original language
(disc
in which the
recorded.
Other: To select another language, press number
buttons to enter the
according
to the
enter the wrong
remote control.
corresponding 4-digit number
language code list on page 30. If you
language code, press CLEAR on the
then press
ENTER to confirm your selection.
Some items require additional steps.
or
Original:
on-screen
DVD-V
language you prefer for the
audio), subtitles, and the disc menu.
will be shown the current
Press SET UP
for the
language
Disc Audio / Subtitle / Menu
appears.
move
item,
a
Select the
menu
Select
OSD
Operation
setup
2 press
4
Original
Move
the remote control.
Use v / V to select the desired
3
Off
Disc Menu
A second press of
Press SET UP.
The
Disc Subtitle
screen.
To go back to the previous level:
Press b on the remote control.
The
Original
and exit the Menu:
SET UP will take you back to initial
To go to the next level:
1
English
Disc Audio
pages 14 to 17.
display
Press B
OSD
DISPLAY
setup
DISPLAY
menu.
TV
16:9
Aspect
Display
Mode
Progressive
Widescreen
Off
Scan
Move
TV
Aspect
DVD-V
4:3: Select when
a
16:9: Select when
Display
Display
Mode
Mode
Select
DVD-A
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
DVD-V
setting
DVD-A
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox:
Displays a wide picture with
portions of the screen.
bands
on
the
upper and lower
Panscan:
the entire
14
Automatically displays
the wide
picture
and cuts off the
portions
that do not fit.
screen
on
Before
Operation (Continued)
Progressive Scan
AUDIO
Progressive Scan Video provides
pictures with less flickering.
the
highest quality
Each DVD disc has
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the receiver to a standard (analog)
television,
set
Progressive
Select
1
menu
scan
set
signal,
"Progressive
the
Progressive
Scan"
variety
type of audio system you
Scan to Off.
of audio
on
output options.
options according
to
use.
Prepa tion
AUDIO
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
progressive
a
Set the DVD/CD Receiver's AUDIO
5.1
a
Scan to On.
Select
Speaker Setup
DRC
On
Vocal
On
the DISPLAY
then press B.
DISPLAY
TV
Move
Display
Select
Off
Aspect
On
Mode
Progressive
5.1
Scan
Speaker Setup
DVD-V
DVD-A
Select
speaker settings, including volume balance and
or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setting" page 25)
distance,
Move
Select
Dynamic Range Control (DRC)
2
3
Select "On"
Press ENTER to confirm your selection.
menu will appear.
With the DVD
4
When the confirm
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
using
the v / V buttons.
DVD-V
menu
appears on your screen
Cancel is highlighted as default. Use the b / B
buttons to highlight Enter.
ENTER will set the DVD/CD Receiver
to
scan
possible,
and the
at
a
thanks to
digital
audio
technology. However,
quietest ones). Then, you may listen to a movie
losing dialog intelligibility.
lower volume without
Set DRC to On for this effect.
mode.
otes
ote
Progressive
menu
DivX
format, you can hear a program's soundtrack in the most accurate and realistic presentation
The confirm
5 Pressing
Progressive
DVD-A
Scan will not be
displayed
in the
setup
when the VIDEO OUT SELECTOR switch is
set at SCART
position.
The DRC function works
The level of
depending
Caution
Vocal
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
only during playback
of
recorded discs.
Dolby Digital
Dynamic Range Compression
on
may differ
the DVD disc.
DVD-V
Once the
to On in error, you must reset the unit.
1)
Set Vocal to On
only
DVD is
The karaoke channels
mix into
playing.
a
when
a
multi-channel Karaoke
on
the disc will
normal stereo sound.
Remove any disc from the unit and close the disc
on the display
tray. See that "NO DISC" is displayed
window
2)
Press and hold STOP
release it. The video
standard
visible
on a
for five seconds then
to the
picture will once again be
conventional analog TV or monitor.
setting,
and
(x)
output will be restored
a
15
Before
LOCK
Operation (Continued)
Password
(Parental Control)
You
LOCK
Unlock
Rating
****
Password
Follow
Move
that may not be suitable
of these discs contain parental
scenes
Many
applies
control information that
to the
complete
the disc. Movies and
disc
or
rated
scenes are
1
2
Enter
setup
the LOCK
then, press
menu
B.
the
6-digit number
security code is
a new
code
Code
Password and
Rating,
features, you
must
input
code you created.
If you have not yet entered a
prompted to do so.
"
the
Country
4-digit
security
code you
are
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3 Selectaratingfrom1to8usingthev/V
buttons.
Rating 1-8: Rating
rating eight (8)
(1)
one
has the most restrictions
is the least restrictive.
Code
can
"210499"
on
clear it
the
using
setup
menu
cleared.
"
appears on the TV screen,
and then press SET UP to move to the
INPUT PASSWD
press STOP
(x)
menu.
Country
Code
were
DVD-V
country/area
used to rate the DVD-Video
in the reference
security
and
menu.
described above.
as
Enter the code of the
the
access
or
ote
your children from being able to view material you
believe is unsuitable.
To
then press B.
then press ENTER.
forget your Security
Input
When
on
it
and the
parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
"Rating"
menu
(Rating). "Change"
If you forget your security code you
the following steps:
to
The
Select
highlighted.
new 4-digit code,
again to verify.
Press SET UP to exit the
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
1
2
the LOCK
on
shown left
as
Select
DVD-V
scenes on
2
Enter the
If you
certain
step
"New" is
4
for children to view.
change password.
Select Password
Input
Some movies contain
or
1
3
Rating
enter
2
Code
Country
can
(Security Code)
whose standards
disc, based
on
the list
chapter.
Code"
1
Select
2
Follow
3
4
Select the first character
"Country
on
the LOCK menu, then
press B.
step 2
Shift the
as
cursor
shown left
(Rating).
using
v / V buttons.
using B button and select
using v / V buttons.
the
second character
Unlock
If you select
and the disc
unlock, parental control is
plays
not active
ote
If you set a rating for the DVD/CD Receiver, all disc
scenes with the same rating or lower are played. Higher
rated
scenes are
is available
same
rating
on
not
played
or
lower
or a
change
one.
alternate
the
rating
If
no
scene
suitable alternative is
must enter the
level in order to
Press ENTER to confirm your
4 then press
16
an
the disc. The alternative must have the
found, playback stops. You
word
unless
SET UP to exit the
Press ENTER to confirm your country code
5 selection.
in full.
4-digit passplay the disc.
rating selection,
menu.
Before
DVD
Operation (Continued)
OTHERS
or
Playing
Video CD
a
Operation
DVD and Video CD
OTHERS
Playback Setup
PBC
On
DivX(R) Registration
Select
Turn
on
VCD2.0
DVD
the TV and select the video
VCD1.1
input
source con-
nected to the DVD/CD Receiver.
Audio
system: Turn
and select the
on
input
the audio
source
Operation
system
connected to the
DVD/CD Receiver.
Select
Move
PBC
Set
1
VCD
Playback
Press OPEN/CLOSE
Control
to On
(PBC)
On:Video CDs with PBC
or
Off.
Load
played according
are
to the
2 facingyour
played
are
the
same
way
as
Audio CDs.
3
DivX(R) Registration
You
can
DivX
show the DivX DRM
Your
Please
the
registration
use
DivX(R)
:
using
the
To learn
only.
more
to close the
tray.
the TV screen, and playback
If playback does not start,
on
might
menu
appear
instead.
If
with
Video On Demand service.
DivX(R)
automatically.
(Z)
sure
XXXXXXXX
register this player
This will allow you to rent and
READING appears
press PLAY.
In some cases, the disc
(Digital Right
code is
this code to
tray.
chosen disc in the tray, with the label
Press OPEN/CLOSE
starts
code for your unit
Management) Registration
to open the disc
up.
When a double-sided DVD is inserted, make
the side you want to play is facing down.
PBC.
Off:Video CDs with PBC
(Z)
The
purchase videos
DVD
Video On Demand format.
a menu screen
is
displayed
may be displayed first after
Video CD which contains a menu.
menu screen
or
loading
a
go to www.divx.com/vod
DVD-V
The
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
Use the b/B/v/V buttons to select the
an
encrypt movie file.
want to
or
view, then press ENTER
DVD MENU to return to the
title/chapter
you
to start. Press TITLE
menu screen.
DVD-A
otes
If you rent the DivX VOD file, it has several
viewing limits as show below.
options
of
Use the b/B/v/V buttons to select
an
option
you
want, then press ENTER to view the option.
VCD2.0
?
Display
the number which you
can
watch the file.
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
?
This rental video has 7 views left. A view
ends when you stop
video,
or
playback, play
player.
different
use one
of your 7 views
Yes
The rental has been
Display
expired.
the authorization
This video
player
expired.
error.
is not authorized to
play this video.
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
menu screen.
You also may set PBC to Off under
setup.
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental
?
menu screen.
and the exact
now
No
This rental is
setting
using
turn off your
Do you want to
?
a
Menu
Control",
(see
page 16).
region code.
on
DVDs may have a
Your receiver will not
play
discs that have
code different from your receiver. The
this player is 2 (two).
region
region code
a
for
17
DVD
Video CD
or
Operation (Continued)
Still Picture and
General Features
ote
Unless stated
otherwise, all operations described
use
Press PAUSE/STEP
during playback.
The DVD/CD Receiver will
now
go into PAUSE
mode.
the remote control. Some features may also be
available on the Setup menu.
Moving
1
Frame-by-frame playback
You
2 ing
to another TITLE/GROUP
advance the
can
PAUSE/STEP
picture frame-by-frame by pressrepeatedly on the remote control.
Search
When
move
a
disc has
than
more
to another
title/group
one
as
title/group,
you
can
follows:
Press
DISP., then press the appropriate numbered
button
(0-9)
Moving
When
a
a
title number.
on a
more
disc has
than
chapter/track
as
Press .
or
one
more
than
track, you
one
chapter
can move
briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISP. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
For
two-digit numbers, press
(0-9) in rapid succession.
1
Press SLOW -/+
1/8, t 1/4
1/16, T 1/8, T 1/4
3
To exit slow motion
1
To
playback
mX8, mX16,
mode, press PLAY.
-
Repeat Chapter/Title/Off
repeat the currently playing chapter, press
REPEAT.
The
To
Repeat Chapter
icon appears
on
the TV
screen.
repeat the title currently playing, press
REPEAT
The
To exit
second time.
a
Repeat
Title icon appears
on
Repeat mode, press
the TV
screen.
REPEAT
a
third
time.
Repeat
Video CDs
or
t 1/2
or
T 1/2
required speed: t
(backward), or T
(forward).
1
To
Off icon appears
on
the TV
screen.
reverse
is not
applicable
for
3
Repeat
Track/All/Off
repeat the track currently playing, press
To
Repeat
Track icon appears
on
the TV
screen.
repeat the disc currently playing, press
REPEAT
second time.
a
Repeat All
To exit
icon appears
on
the TV
Repeat mode, press
screen.
REPEAT
a
third
time.
The
Video CD.
-
REPEAT.
The
2
mode, press PLAY.
ote
in
to select the
Repeat
The
Slow motion
go into SEARCH mode.
pause.
Use the SLOW -/+ to select the
t
now
M
To exit SEARCH
The
during
or
DVD-Video discs
3
The receiver will enter SLOW mode.
2 1/16,
3
the numbered buttons
Slow Motion
during playback.
(backward) or MX2, MX4, MX8,
MX16, MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8, mX16 (backward) or
MX2, MX4, MX8, MX16 (forward).
2
ote
M
mX100
or a
follows:
or
Press m
to another
>
Press m
The DVD/CD Receiver will
repeatedly
2 required speed: mX2,
mX4,
to another CHAPTER/TRACK
title
disc has
to select
1
Repeat
Off icon appears
on
the TV
screen.
ote
On
a
the
setup
17.
Video CD with
menu
to
PBC, you
use
the
must set PBC to Off
Repeat
on
function. See page
DVD
Video CD
or
General Features
Repeat
To
repeat
Operation (Continued)
(continued)
Marker Search
You
A-B
sequence in
a
a
briefly
Press A-B
again
A-B appears
sequence
on
briefly
begins.
the TV
starting point.
1
screen.
at your chosen end
on
start
points
To enter
title:
Press A-B at your chosen
A- appears
can
nine
the TV screen, and the
a
playback
on a
Time Search
The on-screen dis-
points
Marked Scene
a
1 During
2
3 Playback
4
playback, press
The MARKER SEARCH
menu
SEARCH.
will appear
on
the
a
screen.
marker
number that you want to recall.
Press ENTER.
elapsed playing
time of
Within 10 seconds, press 3/4 to select the Time
Search icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
Within 10 seconds, use the number buttons to
enter the required start time. Enter hours,
minutes, and seconds from left
to
right
in the
box.
If you enter the wrong numbers, press CLEAR to
the numbers you entered. Then enter the correct
remove
num-
bers.
To
will start from the Marked
remove
scene.
the MARKER SEARCH menu, press
SEARCH.
To clear
a
Marked Scene
disc
1 During playback,
2
3
4 Repeat steps
5
The MARKER SEARCH
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the marker number that you
want to erase.
Press CLEAR.
Within 10 seconds, press ENTER to confirm the
start time.
starts from the selected time
Playback
point.
briefly.
Within 10 seconds, press 1/2 to select
the current disc.
enter
screen
1 to enter up to nine Marker
disc
at
the TV
on
disc.
To Recall
The Time Search box shows the
to
During disc playback, press MARKER when
playback reaches the spot that you want to
2 Repeat step
To cancel the sequence, press A-B.
Press DISP. during playback.
play appears on the screen.
point. Up
mark, follow these steps.
The marker icon will appear
repeat
playing
memorized
a
memorize.
point.
The Time Search function allows you to start
any chosen time on the disc.
from
be memorized.
can
an
invalid
on
the disc. If you
time, playback will continue from the
current
The marker number will be erased from the list.
2 and 3 to erase additional marker
numbers.
To
remove
the MARKER SEARCH menu, press
SEARCH.
Zoom
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1
Press ZOOM
during playback
If you press ZOOM
increases up to four
100% size
→
1600% size
2
or
still
playback
activate the Zoom function.
repeatedly,
400% size
→
the
→
800%
level
→
100% size
Use the 1234buttons to
zoomed
magnification
steps.
move
through
picture.
ote
The
zoom
function may not work for
some
DVDs.
the
to
Operation
DVD
Video CD
or
Operation (Continued)
DVD Features
Special
DVD-V
A
DVD-A
DVDs may contain menus that allow you to access
features. To use the disc menu, press MENU.
to select
the 1/2/3/4 buttons to
quality that is closer to the artist's master recording or
longer recordings. Many DVD Audio discs contain
on-screen text, such as artist biographies, playlists, or
lyrics. Some DVD Audio discs contain photo galleries or
video clips.
an
high-
press ENTER.
ote
To
DVD-V
Title Menu
DVD-A
If the current title has
the
2
menu can
guage and subtitle
title.
menu, the
menu
menu
will appear
on
DVD-V
may appear.
angles, spoken lanoptions, and chapters for the
is
menu
DVD-A
displayed.
display.
Language
1.
Press DISP.
2.
Press 3/4 to select
3.
Press 1/2
DVD-V
during playback
Group
DivX
Press AUDIO
different
to another GROUP
groups. Your player enables you to quickly access
different groups during playback via the on-screen
the Audio
Changing
and surround effect of
Some DVD Audio discs divide content into different
DVD-A
Press MENU.
The disc
quality
receiver). If you use the DIGITAL OUT (OPTICAL or
COAXIAL) for your audio connection, the sound will
only be similar to CD-quality sound even though you're
playing a DVD Audio disc.
Moving
Disc Menu
maximum sound
Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/CD
Otherwise, the disc
list camera
screen.
The
a
enjoy
DVD
Press TITLE.
1
used for
for
special
Then, press the appropriate number button
times the
music, either Advanced Resolution multi-channel sound
Checking the contents of DVD Video
discs: Menus
option. Alternatively, use
light your selection, then
typical DVD Audio disc contains up to seven
capacity of a CD. This additional space is
data
repeatedly during playback
audio language or audio track.
to hear
or
in
on
stop mode.
icon.
the numbered buttons
(0-9)
to select
a
group number.
a
ote
Changing
the Audio Channel
VCD2.0
VCD1.1
content that
can only be accessed by entering a password. If the lock icon appears on the TV screen, enter
the password (sometimes you'll find it on the disc's
Press AUDIO
different
repeatedly during playback to hear a
audio channel (STER., LEFT or RIGHT).
jacket
ote
If
Sometimes the author of the disc creates hidden
appears, the feature is not available
on
the disc.
cover or on a
isn't dictated
by
web
site).
This
password
your DVD/CD receiver
---
it is
control
a
function
of the disc.
Since the
Subtitles
DVD-V
Press S-TITLE
repeatedly during playback
languages.
DivX
the
to
see
the
authoring of DVD Audio Discs varies, some of
display choices might not be available for
you're playing.
on-screen
the disc
different subtitle
Viewing
otes
The subtitle file of the DivX file is
displayed only smi,
srt and sub.
If there is
no
information
not read in the DivX
or
there is
file, "1/1"
etc
a
are
code that
can
displayed.
DVD Audio Discs
DVD Audio is
building on the success
of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A
DVD Audio disc can be identified by the DVD audio logo
on the disc jacket or on the disc itself.
a new
Since DVD Audio discs
are
various ways to
1.
Press DISP.
Press 3/4 to select
3.
Press 1/2 to select
20
hold
a
lot of content, there
on the disc.
what's available
during playback.
disc format
can provide higher quality stereo than Audio
sampling rate of up to 192kHz (compared to
44.1kHz for CDs). DVD Audio digital sound can be
delivered with up to 24 bits of data (compared to 16 bits
for a standard CD).
a
can
see
2.
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends upon
the way the disc
was
created.
ote
DVD Audio
CDs with
another PAGE
Since the
the
authoring of DVD Audio Discs varies, some of
display choices might not be available for
you're playing.
on-screen
the disc
Audio CD
Playing
Disc
an
CD
MP3/WMA Disc
or
Operation
Audio CD and MP3/WMA
MP3
Repeat Track/All/Off
You
WMA
can
play
title/chapter/all/track
a
1 Press REPEAT when
The DVD/CD Receiver
recordings
on
MP3/WMA formatted
play
can
CD-ROM, CD-R,
or
CD-RW discs.
2 Press REPEAT to select
?
TRACK:
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
?
ALL:
?
Off(No display):
or
ENTER and
playback
on a
WMA
disc.
disc. The
repeat icon
desired
a
repeat mode.
the current track
repeats
repeats all the tracks
does not
on a
Operation
disc.
play repeatedly.
starts.
1/12
0:00:00
playing
a
MP3
appears.
Audio CD
PLAY
CD
Audio CD
List
Program
Track1
Track8
Track2
Track3
Track3
Track12
Track4
Track7
Track5
Track6
Track6
Track9
Track7
Track1
Track8
Track10
Search
CD
1 Press m
or
or
WMA
Mduring playback.
The receiver will
2 Press m
MP3
now
M
go into SEARCH mode.
repeatedly
to select the
speed: mX2, mX4, mX8 (backward)
MX4, MX8 (forward).
3 To exit SEARCH
required
or
MX2,
mode, press PLAY.
MP3 / WMA
1.
Press v / V to select
2.
a
folder, and press ENTER
to
the folder contents.
see
Press v / V to select
ENTER.
a
MP3 / WMA disc
track then press PLAY
or
starts.
Playback
limited
?
as
compatibility
with this
player
is
follows:
Sampling frequency: within 32 48
within 24 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32- 192kbps (WMA)
kHz
The DVD/CD Receiver cannot read
an
-
(MP3),
-
0:00:00
1/104
?
MP3
List
Program
?
1-Music1
-
MP3/WMA
2-Music2
file that has
3-Music3
file extension other than
a
4-Music4
".mp3"
/
".wma".
5-Music5
6-Music6
7-Music7
?
CD-R
?
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
otes
If you
are
in
file list
a
on
to return to the Folder
the MP3/WMA
list,
use
menu
the v / V to
Press MENU to
On
a
move
highlight
?
CD with MP3/WMA file and JPEG
file, you can
Press TITLE and
menu.
MP3/WMA
top of the
JPEG word
or
use
menu
is
high-
b / B to select MP3/WMA
or
JPEG
on
then press ENTER.
Pause
CD
WMA
press PLAY
to another Track
Press .
track
or
or
>
or
In
case
of audio
CD
CD,
should have
They
should not
to
step back
to go
using
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*:"<>letc.
?
The total number of files
on
the disc should be less
than 999.
requires
discs and
recordings
directly
to the
WMA
to the next
track.
previous
to any
optimal playback quality. Pre-recorded DVDs
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MP3
briefly during playback to go
beginning of the current
briefly
the track number
names
incorporate
are
press
to return to the
Press . twice
?
File
must
Creator, which
achieve
during playback.
playback,
again.
MP3 / WMA files. We
to meet certain technical standards in order to
PAUSE/STEP
Moving
playback
This DVD/CD Receiver
MP3
1 Press PAUSE/STEP
2 To return to
to
format should be ISO 9660
recommend that you use Easy-CD
creates an ISO 9660 file system.
to the next page.
switch MP3/WMA and JPEG
lighted. Then,
impossible
and want
and press ENTER.
physical
track,
the numbered buttons
track.
enter
(0-9)
these
require certain pre-existing conditions (see
above) to ensure compatible playback.
Customers should note that
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
during playback.
21
JPEG Disc
Viewing
This unit
a
Operation
JPEG disc
JPEG
JPEG disc
play discs with JPEG files.
Before playing JPEG recordings, read the
JPEG Recordings on right.
as
can
disc and close the tray.
The JPEG menu appears on the TV
Insert
notes
on
?
with this
is limited
player
upon the size and number of JPEG
a long time for the DVD/CD
Depending
files, it could take
Receiver to read the disc's contents. If you don't
display after several minutes,
a
see an on-screen
screen.
of the files may be too large
reduce the
resolution of the JPEG files to less than 2760 x
some
JPEG
2048
List
compatibility
follows:
Preview
---
pixels
and burn another disc.
JPEG Folder 1
?
JPEG Folder 2
The total number of files and folders
on
the disc
JPEG Folder 3
should be less than 999.
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
?
JPEG Folder 7
JPEG Folder 8
Press v / V to select
2
folder, and press ENTER.
a
A list of files in the folder appears.
If you are in a file list and want to return to the
previous
Folder
remote to
list,
the v / V buttons
use
on
?
While
Windows
viewing a file, you can press STOP
previous menu (JPEG menu).
to
move
ips
There
?
four Slide
:
Speed options
(Normal), >>> (Fast) and II (off).
Use v/V/b/B to highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
are
(Slow),
>>
JPEG
SLIDE SHOW
Use vVbBto
to
highlight
the
(Slide Show)
then
press ENTER.
JPEG
STILL PICTURE
1.
Press PAUSE/STEP
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide
PAUSE/STEP
show, press PLAY
(.
or
>)
to advance to the next
or
once
Press b / B
22
during showing
clockwise
or
while
previous
TO ROTATE PICTURE
picture
press
again.
JPEG
MOVING TO ANOTHER FILE
Press SKIP
or
a
viewing
a
picture
file.
JPEG
picture
to rotate the
counter-clockwise.
the files
copying
different
by
are
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
names
to be read
to the
>
File
them
If you want to view a particular file, press v / V
to highlight a file and press ENTER or PLAY.
3
?
If the files have
rename
?
a
Ensure that all the selected files have the
extensions when
the
and press ENTER.
highlight
?
Some discs may be incompatible due to
recording format or the condition of disc.
".jpg"
extension will not be able
this DVD/CD Receiver. Even
shown
Explorer.
as
JPEG
image
files in
though
Programmed Playback
CD
MP3
WMA
The program function enables you to store your favorite tracks from any disc in the receiver memory. A program
contain 300 tracks.
1
Insert
disc.
a
REPEAT PROGRAMMED TRACKS
1.
Audio CD and MP3/WMA Discs:
Audio CD
or
MP3/WMA
menu
appears
as
1/12
0:00:00
Audio CD
Program
playing
a
below.
Press REPEAT to select
a
disc. The
desired
1/104
MP3
List
Press REPEAT when
repeat
icon appears.
2.
0:00:00
can
repeat mode.
JPEG
?
TRACK:
?
ALL:
?
Off(No display):
Program
List
Track1
Track8
Music Folder 1
Track2
Track3
Music Folder 2
Track3
Track12
Music Folder 3
Track4
Track7
Music Folder 4
Track5
Track6
Music Folder 5
Track6
Track9
Music Folder 6
Track7
Track1
Track8
Track10
repeats the current track
repeats all the tracks on programmed list.
does not
play repeatedly.
Music Folder 7
ERASING A TRACK FROM "PROGRAM"
Music Folder 8
LIST
Audio CD Menu
MP3/WMA Menu
1.
Use vVto select the track that you wish to
Program list.
erase
from the
2
Select
or
a
select
track
on
the
"List", then press PROGRAM
"
2.
(Add)" icon then press ENTER to
the selected track on the "Program" list.
place
Repeat
to
place
additional tracks
on
the list.
You
can
Alternatively, select
(Delete)"
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks
ote
add all tracks in the disc. Select
"
( Add All)"
icon
then press ENTER.
"
Press CLEAR.
on
the list.
ERASING THE COMPLETE PROGRAM
LIST
3
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
Use v / V to select
page.
4
(Del all)",
then press ENTER.
ote
Press PLAY
or
ENTER to start.
Playback begins
programmed the tracks.
the order in which you
Playback stops after all of the tracks
"Program"
list have
To
normal
resume
5 back,
"
select
a
played
on
in
The programs
are
also cleared when the disc is removed.
the
once.
playback
from
track of AUDIO CD
programmed play(or MP3/WMA)
list and then press PLAY.
23
Operation
DivX Disc
Using
this DVD/CD Receiver you
Insert
1
Operation
a
appears
disc and close the
on
the TV
can
play
DivX disc.
DivX disc
tray. The DivX
menu
as
compatibility
with this
player
is limited
follows:
screen.
?A vailable resolution size of the DivX file is under
0:00:00
720x576
1/12
(W
x
H) pixel.
DIVX
?
List
The file
name
of the DivX subtitle is available
20~40characters
Movie Folder 1
Movie Folder 2
Movie Folder 3
?
Movie Folder 4
If there is
Movie Folder 6
Movie Folder 8
?
a
folder, and press ENTER. A
?
list of files in the folder appears. If you are in a file
list and want to return to the Folder list, use the
v / V buttons
on
the remote to
highlight
"
_
second, this unit may
Press STOP to exit.
30 per
operate normally.
or
audio is out-
If the file is recorded with
ports
If you want to view a particular file, press v / V to
a file and press ENTER or PLAY.
over
If the video and audio structure of recorded file
is not interleaved, either video
?
3 highlight
not
putted.
and
press ENTER.
4
"
If the number of the screen frame is
1
2
code to express in the DivX
as
mark on the dis-
play.
Movie Folder 7
Press v / V to select
impossible
file, it may be displayed
Movie Folder 5
by
(different by language).
*
some
of
1-point
GMC, the unit supof the record level.
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4
There
encoders, like DivX
are
or
Xvid, have this option.
different levels of GMC
1-point, 2-point,
or
3-point
encoding, usually
called
GMC.
otes
?
Be
to select "SUBTITLE ON" mode before
sure
DivX file
?
playback
ENTER every time.
When the subtile has more than two languages in the
original
subtile is
only
file,
available.
?
The Pro
?
The DivX files in your memory card will not be able to be
play.
a
by pressing
logic
II Sound mode is not available for DivX file.
Playable
DivX file
z ".avi ", ".mpg ", ".mpeg
Playable
"
Codec format
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43
Playable
", "3IVX ", "MP42 ".
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 32 48 kHz (MP3),
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
-
-
?
-
-
24
Speaker Setup
Adjust
the
for the built-in 5.1 channel
following settings
surround decoder.
Distance
If you connected speakers to your DVD/CD Receiver,
the distance lets the speakers know how far the
setting
1
2
3
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
Press SET UP.
The
setup
menu
appears.
listener at the
Use v / V to select the AUDIO
B to
move
option
then press
Use v / V to select the
move
time.
adjust
the Distance of the selected
speaker.
to the second level.
then press B to
is highlighted.
same
Press b / B to
Speaker Setup option
to the third level. "Select"
ote
You
Press ENTER and 5.1
4 appears.
Speaker Setup
menu
can adjust the distance
speakers (left & right) only.
of Center
speaker
and Rear
Test
AUDIO
Press b / B to test the
Adjust
Speaker
Size
Front L
memorized in the
Small
Front Left
Volume
0
dB
Distance
2
m
Test
Rear
Move
Use b / B to select the desired
6 Adjust options using
7
speaker.
signals
system.
(L)
Right (R)
→
Center
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
Off
Select
5
of each
signals
the volume to match the volume of test
Return
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. The
unit returns to the previous menu.
Speaker
Select
speaker that you want to adjust.
(Front speakers (Left), Front speakers (Right),
Speaker, SubWoofer, Rear speakers (Left), or
speakers (Right))
a
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Center
Rear
Dolby
Size
Since the
speaker settings
are
fixed, you
cannot
change
them.
Volume
Press b / B to
speaker. (-5dB
adjust the output
+5dB)
level of the selected
~
25
Operation
Additional Information
Last Condition
Controlling
Memory
This DVD/CD Receiver memorizes the
user
for
settings
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
switch off the
player. If you load
memorized, the latest stop
a
tings
ly recalled.
position
the TV
Your remote control is
DVD/CD Receiver
as
of operating your
limited functions of LG TV.
capable
well
as
Follow the instructions below to
operate for your LG TV.
disc that has its setis automatical-
Before
1
using
the remote
select the device to be
control, press the TV
To switch the remote control mode
different
device),
be
to
operated.
(to operate
a
to press the TV first.
sure
otes
Settings
are
stored in memory for
use
any time.
This DVD/CD Receiver does not memorize
settings
of
disc if you switch off the DVD/CD Receiver before
commencing to play it.
2
The
POWER, CH( E / D ), VOLUME (+/-), and INPUT
on remote control are used to operate the
buttons
LG TV.
a
Remote Control Codes for LG TV
Hold POWER and press PR/CH(+/-)
repeatedly until the TV on or off.
Screen Saver
The
Setting
appears when you leave the DVD
mode for about five minutes.
(E/D)
button
screen saver
player
in
Stop
ote
If the remote control does not
System
TV, try the other code
Select
You must select the
appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold P/STEP on the front panel or remote
control for
more
than 5 seconds to be able to select
system (PAL, NTSC
or
a
AUTO).
When the selected
system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO:
Select when DVD/CD Receiver is connected
with Multi
NTSC:
system TV.
Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
originally supplied
Due to the variety
or use
with the LG TV.
of codes used
OUR COMPANY cannot
control will
operate your particular
the remote control
(LG and Gold Star)
by manufacturers,
guarantee that the
operate every model of LG TV.
remote
Operation
Presetting
You
can
tuning,
preset
make
with Radio
the radio stations
50 stations for FM and AM
sure
Before
(MW).
Preset radio stations in the DVD/CD Receiver's memory
(see "Presetting radio stations" on the left).
that you have turned down the vol-
first
the remote control until FM
1
ume.
Press BAND
1
AM
on
in the
(MW) appears
display
or
window.
And then every time you press
AM (MW) changes alternately.
BAND, FM and
3
Press and hold TUNING
or
2
on
panel for about two seconds
frequency indication starts to change,
the front
until the
appear in the
display
on
( D/ E )
on
on
the remote control.
Use manual
For manual
the remote control
a
weak
(+)
in
step
3
manually.
Press and hold PROG./MEMO. for about two seconds
and "CLEAR ALL" is
appeared
in the
display window
again, the stations are
and then press PROG./MEMO.
cleared.
If you have accidentally entered into the "CLEAR ALL"
and you do not wish to clear the memory, do not
press any key. After a few seconds, the "CLEAR ALL"
will go off
by
itself and
change
to mode.
ote
already
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
change
the
automatic
tuning,
tuning
press TUN(-)
repeatedly.
in
step
2.
b or TUN
(+)
B
on
preset number, follow the steps
a
5-6
as
preset radio station directly
a
the number buttons
on
the remote control
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
To clear all the stored stations
above.
or
tuning, press and hold TUN(-) b or
B for about two seconds on the remote
can use
to select
signal
repeatedly
or
to tune in the station
To
or
etc.,).
control.
station with
If all stations have
AV 1,
3 to 6 to store other stations.
Press TUNING
display
(DVD/CD,
For automatic
You
a
-
the remote control
To select
To tune in
by rotating VOLUME on the
by pressing VOLUME + or on the
control repeatedly.
or
To listen to non-preset radio stations
TUN
Repeat steps
the remote control
on
preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
Press POWER to turn the DVD/CD Receiver off
The station is stored.
7
PR(D/E) repeatedly
select another function mode
the preset number you want.
Press PROG./MEMO.
Press
To turn off the radio
the remote control to select
6 again.
FM appears in the
to select the
remote
a
program)
preset number will flash in the display window.
Press PR
or
the volume
window.
Press PROG./MEMO.
A
stereo
display
front
when the DVD/CD Receiver tunes in
(for
(MW)
window.
3 Adjustpanel
then
release.
Scanning stops
Press BAND until AM
The last received station is tuned in.
2
station. "TUNED" and "STEREO"
to the radio
Listening
a
(within
3
seconds).
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
display window.
There will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
"STEREO"
on
the front
disappears
in the
effect.
To
improve reception
supplied antennas.
Reorient the
Operation
Operation
RDS
with Radio
(Continued)
Programme Search (PTY)
Operation
This unit is
A
which
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
casts with
Now in
use
in many
countries, RDS is
a
system for
the
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS
Tuning
When
a
FM station is tuned in and it contains RDS
the unit will
data,
automatically display the station's call sign
light in the Display Window
and the RDS indicator will
well
as
(PS),
indicators for the RDS services programme
programme type recognition (PTY), Radiotext (RT)
as
and Clock Time
RDS
if transmitted
(CT)
by
the station.
Display Options
The RDS
system is capable of transmitting
wide
a
of information in addition to the initial call
variety
that appears when
RDS operation the
a
sign
station is first tuned. In normal
display
will indicate the station
name, broadcast network or call letters. Pressing RDS
the remote control enables you to cycle through the
on
various data
types in the sequence:
PTY
FREQUENCY
(PS
PS
(Programme
RT
CT)
Service
channel is shown in the
name)- The name
Display Window.
of the
PTY
the
(Programme type recognition)- The name of
programme type is shown in the Display Window.
RT
(Radiotext)-
A "text" message contains special
information from the broadcast station. Note that this
message may scroll
across
the
display
to
permit
message.
CT
(Time
controlled
the
by
channel)-
Enables the
unit to receive the actual time and show it in the
Display
Window.
ote
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
Display
CT
being transmitted,
Window will show
a
PTY
NONE, PS NONE message.
the
benefit of RDS is its
ability to encode broadProgramme Type (PTY) codes that indicate
type of material being broadcast. The following list
major
shows the abbreviations used to indicate each PTY
along
with
an
explanation
of the PTY.
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
Speech Programme
Music
EASY M
Easy Listening
LIGHT M
Classical Music
Music
CLASSICS
Serious Classical Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
Programmes
Programmes
Programmes
Programmes
PHONE IN
Phone-In
TRAVEL
Travel and
LEISURE
Leisure and
JAZZ
Jazz Music
COUNTRY
Country
NATION M
National Music
OLDIES
Oldies Music
Touring
Hobby
Music
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
Message
Broadcast Information
NONE, RT NONE,
You may search for a specific
by following these steps:
Programme Type (PTY)
Press BAND to select FM mode.
1
Press
the
2 show the last
PTY
on
will
3
4
Press PTY
remote
control, the display
PTY in
use.
repeatedly
When the PTY is
to select
a
desired PTY.
selected, press and hold PTY.
The unit will go into an automatic search mode.
When a station is tuned, the search will stop.
Other Functions
XTS
Sleep
Timer
You
set the DVD/CD Receiver to turn off automati-
can
cally
1
at
a
specified
time.
Press SLEEP to set the desired
The SLEEP indicator and
play
2
Setting
sleep
sleep
time.
time appears in the dis-
window.
Each time you press SLEEP the
in the following order.
You
(Excellent True Sound)
enjoy the vivid stereophonic sound of the
digital original source without any signal distortion.
can
Each time you press XTS during 2 channel mode,
the setting changes in the following order.
XTS-1→XTS-2→XTS-3→NORMAL...
setting changes
ips
SLEEP 180 →150 →120→90→80→70 →60→50→
XTS- 1:
40→30→20→10 →OFF
When
sound
playing the movie with the weak bass
relatively to the general music, it
enforces the
ote
Yo u can check the time remaining before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
XTS- 2:
high display
source
XTS- 3:
of sound at woofer
for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the
front
Dimmer
sense
You
effect
via the
rear
by playing the sound
speakers same as the
speakers.
can
operate both XTS-
This function will change the brightness of the display
window on the front panel during in power-on status.
simultaneously
relative degrading
Press the DIMMER
woofer at the XTS- 2 mode.
and it
repeatedly.
Mute
Using
the
Headphone
Connect a stereo headphone
PHONES connector.
plug
The XTS- 2 mode is
temporarily
the
Selecting
can use
VCRs
plug ( 3.5mm)
into the
when you
IN, EURO AV
connectors. Refer to the owner's manual
supplied
operation.
repeatedly on the remote
input source.
on
the
control to
select the desired
Each time you press this button, the mode of the funcchanges in the following sequence:
tion
AV 1: for
selecting
the
analog signal
from AV1 AUDIO IN
& VIDEO IN Connectors.
TV-AUDIO: for
selecting
the TV audio
signal
from SCART.
ote
You
can
also select the
FUNC. button
on
input source by pressing
panel.
the front
to
The unique sound quality of the LG Technology creates
the optimum sound for you to play the perfect playback
of the original sound and to feel the living sound source.
XTS-P ON
other units connected to the AV
with the unit for further information
Press AUX
changing
changing it
2.1 CH.
Each time you press XTS pro the
following order.
Input Source
or
disabled when
XTS pro
Jack
speakers are automatically disconnected
in a headphone (not supplied).
(L/R)
complement the
pitch of the
of the sound
from 2.1 CH to 5.1 CH and it is enabled when
the
You
1 and XTS- 2
ote
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display
window.
The
can
→
XTS-P OFF
setting changes
in
Operation
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
Language
Code
Language
Code
Language
Code
Abkhazian
6566
Finnish
7073
Macedonian
7775
Slovenian
8376
Afar
6565
French
7082
7771
Somali
8379
Afrikaans
6570
Galician
7176
7783
Spanish
6983
Albanian
8381
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Ameharic
6577
German
6869
Maltese
7784
Swahili
8387
Arabic
6582
Greek
6976
Maori
7773
Swedish
8386
Armenian
7289
Greenlandic
7576
Marathi
7782
8476
Assamese
6583
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tamil
8465
Bashkir
6665
Hausa
7265
Nauru
7865
Tatar
8484
Basque
Bengali; Bangla
6985
Hebrew
7387
7869
Telugu
8469
6678
Hindi
7273
7879
Thai
8472
Bhutani
6890
Hungarian
7285
7982
Tibetan
6679
Bihari
6672
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Breton
6682
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkish
8482
Burmese
7789
Irish
7165
Polish
8076
Turkmen
8475
Byelorussian
6669
Italian
7384
Portuguese
8084
Twi
8487
Cambodian
7577
Japanese
7465
Quechua
8185
Ukrainian
8575
Catalan
6765
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Chinese
9072
Kannada
7578
Rumanian
8279
Uzbek
8590
Corsican
6779
Kashmiri
7583
Russian
8285
Vietnamese
8673
Croatian
7282
Kazakh
7575
Samoan
8377
Volapuk
8679
Czech
6783
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Danish
6865
Korean
7579
Scots Gaelic
7168
Wolof
8779
Dutch
7876
Kurdish
7585
Serbian
8382
Xhosa
8872
English
Esperanto
6978
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
6979
Latin
7665
Shona
8378
Yoruba
8979
Estonian
6984
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Faroese
7079
Lingala
7678
Singhalese
8373
Fiji
7074
Lithuanian
7684
Slovak
8375
Country
Choose
a
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Country
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Dutch Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Check the
following guide
for the
possible
of
cause
a
before
problem
contacting
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
Plug the power cord
wall outlet.
Insert
a
disc.
(Check
securely
that the DVD or,
?
The TV is not set to receive DVD
signal
?
output.
Select the
the TV
on
?
The video cable is not connected
?
securely.
sound
or
appropriate video input mode
the picture from the DVD/
The connected TV power is turned off.
?T
The
?
connected with the
equipment
audio cable is not set to receive DVD
The audio cables
not connected
are
playback picture
is
jacks
the TV.
Select the correct
?
input
mode of the
so
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
?
screen.
you can hear the
sound from the DVD/CD Receiver.
securely.
The
u rn on
audio receiver
signal output.
?
the TV
Connect the video cable into the
?
a
on
securely.
?
very low-level
sound is heard.
only
is
so
CD Receiver appears
no
display
lit.)
picture.
There is
into the
audio CD indicator in the DVD
does not work.
No
service.
connecting cable
is
damaged.
dirty.
urn on
the
equipment
connected with
the audio cable.
it with
a new one.
poor.
The DVD/CD Receiver
does not start
?
playback.
Insert
a
disc.
(Check
that the
DVD,
audio CD indicator in the DVD
or
display
is
lit.)
?
An
unplayable
disc is inserted.
?
Insert
a
playable
disc.
the disc
(Check
type, colour system and Regional code.)
?
The disc is
placed upside
down.
?
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?Amenu
is
dirty.
on
the TV
?
?
screen.
on
the disc
tray correctly
guide.
Clean the disc.
Press the SET UP button to turn off the
menu screen.
?
The
Rating
level is set.
?
Cancel the
the
Loud hum
or
noise is
?
The
plugs
and
jacks
are
?W
dirty.
rating
ipe
function
Rating
or
change
level.
them with
a
cloth
slightly
mois-
tened with alcohol.
heard.
?
The disc is
?
The
dirty.
speakers and components
poorly.
?
are
?
connected
?
The DVD/CD Receiver is located too
close to the TV.
Clean the disc.
Connect the
speakers
and
components
securely.
?
Move your TV away from the audio
components.
Refrnce
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
?
Connect the antenna
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been
preset
or
preset
?T
?
une
in the station
Preset the stations
manually.
(page 27).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
does not work
?
The remote control is not
remote
properly.
sensor
pointed
at the
?
of the DVD/CD Receiver.
?
The remote control is too far from the
?
There is
?
DVD/CD Receiver.
an
Point the remote control at the remote
sensor
ft
obstacle in the
path
of the
of the DVD/CD Receiver.
Use the remote control within about 23
(7 m).
?
Remove the obstacle.
are
?
Replace
panel
?
Press DIMMER
remote control and the DVD/CD
Receiver.
?
The batteries in the remote control
flat.
The front
panel display
is too dim.
?
Nothing
display.
is
displayed
on
the front
the batteries with
on
new ones.
the remote control.
Specifications
Power
Power
Refer to main label
Mass
Genral
External dimensions
(W
x
H
x
D)
conditions
CD/ VD
AM
[MW]
54
x
350
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
PAL
35°C, Operation
More than 75 dB
(1 kHz, NOP,
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack x 1/ SCART (TO TV)
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1/ SCART (TO TV)
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1
output
87.5
108.0 MHz
-
or
65.0
MHz,
87.5
-
108.0 MHz
10.7 MHz
60 dB
140
522
(Mono)
10,000 Hz
-
1,620 kHz
-
or
520
-
1,720 kHz
450 kHz
70W+70W(8Ωat1kHz,THD10%)
Front: 70W + 70W (THD 10 %)
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 70W
Inputs
Outputs
AV IN
Surround*: 70W
+
Subwoofer*: 150W
70W
(4Ω
(8Ω
kHz, THD 10 %)
Hz, THD 10 %)
at 1
at 30
S-VIDEO, MONITOR, PHONES: (32 Ω,
Type
Impedance
Frequency Response
1
Centre
Speaker
Way
150
Speaker
-
Input
Input Power
(1m)
70W
x
H
x
D)
V)
Passive Subwoofer
1
Way
2
Speaker
(LHS-55TBW)
1
Way
8Ω
20,000 Hz
86 dB/W
Power
(W
2
1.0
speaker
(LHS-55TBC)
8Ω
Sound Pressure Level
Net Dimensions
Designs
74.0
-
(LHS-55TBS)
Suplied Acesori
LPF/A-Filter)
1.0 V
Stereo mode
Net
20 kHz
0.5 %
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Max.
nm
More than 70 dB
output
Rated
650
laser, wavelength
625/50, NTSC 525/60
Satellite
Speakrs
Refrnce
status: Horizontal
200 Hz to 20 kHz
output
Video
mm
5°C to
5% to 85%
Surround mode
Amplifer
x
Laser
Component
FM
kg
430
Temperature:
S-video
Video
3.9
Operating
Operating humidity
Video
Tuner
Refer to main label
supply
consumption
150
-
20,000 Hz
86 dB/W
1
Speaker
4Ω
(1m)
70W
40
-
1,500 Hz
82 dB/W
(1m)
150 W
140 W
140 W
280x1200x280mm
500x83x90mm
195x402x360mm
2.38kg
0.71kg
6.2kg
Weight
300 W
?Speakers..........................6?Speakercables......................6
?AMloopantenna.....................1?FMantenna.........................1
?Remotecontrol......................1?Batteries(AAA).......................2
?V ideocable.........................1
and
specifications
are
subject
to
change
without notice.
P/N: 3834RH0149E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising