LG | LH-T760IA | User guide | LG LH-T760IA User guide

LG LH-T760IA User guide
LH-T7654IA_JA1ALLD_ENG_07K
DVD RECEIVER
OWNER'S MANUAL
MODEL: LH-T760IA
(Main Unit: LH-T760
Speakers: LHS-76IAS, LHS-76IAC,
LHS-76IAW)
R
USB
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
CAUTION: The
CAUTION
(dripping
as
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
vases,
CAUTION
the Power Cord
Most
appliances recommend they be placed upon
circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
concerning
a
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
dedicated
manual to be certain.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
frayed
shock to persons.
could result in electric shock
The exclamation
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
triangle
point
within
an
is intended to alert the
presence of
user
important operating
(servicing) instructions in the
accompanying the product.
equilateral
to the
and maintenance
literature
it, discontinue
replaced
with
unplug
appliance, and have the cord
replacement part by an
exact
Protect the power cord from
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
openings
ensure
it from
over
in the cabinet
reliable
operation
are
of the
provided
product
for ventilation
and to
protect
heating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
physical
or
mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and
Periodically
authorized servicer.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
and to
fire.
of the
use
an
or
appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the
plug
is
accessible.
easily
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
symbol is
product it means the product is
by the European Directive
attached to
covered
a
2002/96/EC.
2. All electrical and electronic
products should
disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
be
CLASS 1
LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS
1
CLASSE 1
LASER APPARAT
PRODUIT
LASER
government
or
the local authorities.
3. The correct
will
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
To
product employs
ensure
proper
owner's manual
Should the unit
use
a
Laser
of this
System.
product, please
read this
carefully and retain it for future reference.
require maintenance, contact an authorized
service center.
Use of
controls, adjustments
procedures
other than those
performance of
specified herein may result
or
This
product
is manufactured to
comply
requirements
89/336/EEC,
with the radio interference
the
hazardous radiation exposure.
To prevent direct exposure to laser
in
of EEC DIRECTIVE
93/68/EEC and 73/23/EEC.
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
detailed information about
disposal
appliance, please contact your
city office, waste disposal service or the
shop where you purchased the product.
more
of your old
CAUTION:
This
consequences for the environment and
human health.
4. For
WHEN OPEN AND INTERLOCKS DEFEATED.
disposal of your old appliance
help prevent potential negative
Introduction
Maintenance and Service
MaintenanceandService.................3
Beforeuse.............................4
FrontPanel/RearPanel...................5
RemoteControl.........................6
Installation and
a
chapter
before
service technician.
HANDLING THE UNIT
Setup
TVConnections.........................7
Optional Equipment
Refer to the information in this
contacting
Connections
.
.
.
.
.
.
.
.
.
.
.8
When
shipping
AerialConnections......................8
Assembling and Connecting to the Speakers .9
SpeakerSystemConnection...............9
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
HDMIConnection......................10
at the
.11
Displaying Disc Information on-screen
InitialSettings.........................11
GeneralOperation......................11
Language...........................11
Display.............................12
.
.
.
.
save
the
the unit
Please
original shipping
carton and
packing
factory.
.
the exterior surfaces clean
Keeping
Do not
near
volatile
use
liquids
such
as
insecticide spray
the unit.
Do not leave rubber
Audio..............................13
5.1SpeakerSetup.....................13
Lock(ParentalControl).................14
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
on
Others..............................14
Cleaning
Operation
Generalfeatures.......................15
Additionalfeatures.....................16
ControllingtheTV......................16
.17
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback..................17
ViewingaJPEGdisc....................18
PlayingaDivXMovieDisc................19
.
.
.
.
.
DVDAudioDiscs.......................20
.21
PresettingtheRadioStations
ListeningtotheRadio...................21
RDSOperation.........................22
SleepTimerSetting.....................23
.
.
.
.
.
.
.
.
.
.
.
the unit
To clean the
surfaces
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
Maintaining
the Unit
.
The DVD/CD Receiver is
a high-tech, precision
optical pick-up lens and disc drive parts
worn, the picture quality could be
device. If the
are
dirty
or
Dimmer...............................23
diminished.
Mute.................................23
Depending on the operating environment, regular
inspection and maintenance are recommended after
UsingHeadphoneJack..................23
Selectinginputsource...................23
XTS/XTSpro...........................23
every 1,000 hours of
VIRTUALsound........................23
For details,
SoundMode...........................23
service center.
please
use.
contact your nearest authorized
REFERENCE
LanguageCodes.......................24
AreaCodes...........................24
Troubleshooting.....................25-26
Specifications.........................27
3
Introduction
Before
To
of
Types
use
of this
Playable
Discs
DVD
read this
proper
product, please
owner's manual carefully and retain for future
ensure
use
(8cm/12cmdisc)
reference.
Video CD
This manual
provides
information
on
the
(VCD)
(8cm/12cmdisc)
operation
Audio CD
and maintenance of your DVD/CD Receiver. Should
require service, contact an authorized service
(8cm/12cmdisc)
the unit
location.
In addition, this unit can play a DVD-RW, DVD+RW,
SVCD and CD-R or CD-RW that contains audio titles,
About the
"
Symbol Display
"
MP3, WMA, JPEG
may appear
your TV display during
operation and indicates that the function explained in
on
this owner's manual is not available
on
that
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
specific
Used in this Manual
Note:
Indicates
special
notes and
operating
features.
Tip:
Code
Regional
Indicates
tips
and hints for
making
the task easier.
This unit has
unit. This unit
A section whose title has
is
applicable only
symbol.
of the following symbols
represented by the
one
to the disc
DivX files.
Notes:
DVD video disc.
Symbol
or
as
the
Notes
rear
on
a
regional code printed on the rear of the
play only DVD discs labelled same
can
of the unit
Regional
or
Codes
Most DVD discs have
globe
numbers in it
DVD Audio discs
number must match your DVD
code or the disc cannot play.
Audio CDs
MP3 Discs
WMA Discs
JPEG Discs
DivX Discs
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from Digital Theater Systems,
Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital
Surround"
4
a
DVD and finalized DVD±R/RW
Video CDs
Systems,
Systems,
"ALL".
are
Inc.
Inc.
registered trademarks of Digital Theater
Copyright 1996, 2003 Digital Theater
All Rights Reserved."
clearly
visible
on
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different regional
code from your player, the message "Check
Regional
Code" appears
on
the TV
screen.
Front Panel/Rear Panel
PHONES connector
STANDBY/ON
DISC
Tray
STANDBY indicator
Lights
mode
Press and hold down this button about 3
OPEN/CLOSE button
red when the
receiver is in
seconds, then press repeatedly
VOLUME controller
DISPLAY Window
Remote
USB port
Connect to
a
sensor
MONO/ST./
USB port of
memory
TUNING(-/+)
/SKIP(.bb/BB>)
P./STEP
memory device
(USB
to select
other function.
Standby
(off).
a
Introducin
FUNC./PLAY
etc.)
STOP
buttons
Power Cord
SPEAKER connectors
FM Antenna connector
OUTPUT
(TO TV)
EURO AV socket
Connect to
SCART
a
TV with
jack.
L
AUDIO
R
AM
Loop
Antenna connectors
S-VIDEO OUT connector
Cooling
HDMI OUT
MONITOR OUT connector
fan
COMPONENT VIDEO OUT terminals
Connect to
AV2 AUDIO
Do not touch the inner
panel.
Electrostatic
permanent damage
a
TV with Y Pb Pr
Input (L/R)/VIDEO
pins of the jacks on
discharge may cause
the
inputs.
IN Connectors
HDMI output
providing
interface
a high
quality
for digital
audio and video.
rear
to the unit.
5
OPEN/CLOSE
Remote Control
POWER
output
Selects
To
BAND
Select the
System's
tuner
(FM
Selects the VIRTUAL sound
MARKER
bands)
Marks
directly
select numbered
or
options
in
Selects
enjoy great
an
audio
Removes the
sound effect.
language (DVD)
audio channel
or
b/B/v/V
Selects
menu
or
Reverse/ Forward slow
TUN.(-/+) (b/B)
Displays the disc's Title
.
VOLUME
To
adjust
PROG.
Enter
playback.
Program
menu.
a
radio station's
frequency
into the
tuner.
CLEAR
Removes
program
a
track number
mark
menu or a
MARKER SEARCH
(X)
(B)
on
on
the
the
menu.
MUTE
ZOOM
SLEEP
REPEAT
Set the
all
at
ly
REPEAT A-B
Repeats
or removes
MEMO.
REVERSE/FORWARD SKIP
( . /> )
STOP (x)
Repeat chapter, track, title,
menu, if available.
(+/-)
speaker volume.
Accesses
forward.
PAUSE/STEP
PLAY
selection.
TITLE
SCAN/SLOW(bb/BB)
Search backward
menu.
menu
Select programme of Radio.
DVD disc.
menu on a
the
To tune in the desired radio station.
MENU
Accesses the
in the
option
an
display.
PRESET(v/V)
SETUP
setup
menu.
(left/right/up/down)
Acknowledges
(CD).
SOUND
or removes
setup
ENTER
an
Selects the sound mode.
Accesses
language (DVD).
Accesses On-Screen
AUDIO
Selects
subtitle
DISPLAY
sound.
To
a
RETURN
natural and realistic
more
menu.
SUBTITLE
menu.
enjoy
MARKER SEARCH
Displays
a
XTS pro
To
point during playback.
a
SEARCH
service, programme number
a
the multimedia files.
enjoy
VIRTUAL
and AM
0-9 numerical buttons
Select
input
source.
USB
(CD/DVD).
source
tray.
AUX
DVD
Select the
(Z)
and closes the disc
Opens
a
System to turn
specified time.
off automatical-
RDS
To view the various
sequence.
displays
of the RDS
options
RESOL.
Changes
the resolution
depending
your TV.
on
PTY
To start
a
search for
a
PTY
specific
type.
HDMI
Switches the HDMI mode to HDMI
(active) and OFF (inactive).
DIMMER
Press to change brightness of the
display window on the front panel
in power-on status.
during
TV
To control the TV.
(LG
TV
only)
(See page16)
Remote Control
Remote Control
Operation Range
Point the Remote Control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote
sensor
Angle:
About 30° in each direction in front of the remote
sensor
Remove the
Remote
AAA) batteries
correctly.
6
new
batteries. Never mix different
types
of batteries
(standard, alkaline, etc.).
with
installation
cover on
Control, and insert
Caution
Do not mix old and
battery
battery
and
the
rear
two R03
of the
(size
aligned
Installation and
Setup
TV Connections
Make
the
one
of the
following connections, depending
existing equipment.
on
of your
capabilities
S-Video connection
Connect the S-VIDEO OUT
Receiver to the S-VIDEO IN
Tips:
S-Video cable
Video connection
connections described below.
Receiver to the VIDEO IN
Please refer to the manuals of your TV, VCR,
System or other devices as necessary to
video cable
make the best connections.
sure
directly
Connect the MONITOR OUT
jack from the DVD/CD
jack on the TV using the
supplied (V).
Component
Video
(Color
Stream
)
connection
Connect the COMPONENT VIDEO OUT
Caution:
Make
the
(S).
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/CD Receiver. Use one of the
Stereo
jack on the DVD/CD
jack on the TV using
the DVD/CD Receiver is connected
to the TV. Select the correct AV
input
on
your TV.
Do not connect your DVD/CD Receiver to TV via
your VCR. The DVD image could be distorted by
the copy
protection system.
the DVD/CD Receiver to the
on
the TV
using
an
Y Pb Pr
SCART connection
InstaliodSeup
Connect the EURO AV OUTPUT
(TO TV) socket on
corresponding in jacks
cable (T).
the DVD/CD Receiver to the
on
the TV
using
the scart
If your television is
a
high-definition
or
"digital
you may take advantage of the
DVD/CD Receiver's progressive scan output for the
ready" television,
Rear of TV
VIDEO
INPUT
S-VIDEO
INPUT
jacks from
corresponding in jacks
cable (C).
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
SCART INPUT
highest
video resolution
possible.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
Pr
L
read TV's owner's manual then set the resolution
that your TV
can
accept.
Notes:
S
V
C
T
HDMI mode must be set to OFF for VIDEO OUT
and S-VIDEO OUT and
Component
video
connections.
A
picture
via scart
input
is not
supported.
Caution
L
AUDIO
R
VIDEO OUT SELECTOR switch
In
power-off status,
select either
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Rear of DVD/CD Receiver
SCART signal of
depending on how
or
EURO AV TO TV terminal
to connect the unit to the TV.
7
Optional Equipment
1. Connect
Connections
VCR to the AV IN connectors.
a
Connect the
2. Connect the USB
player, etc.)
to
Antenna Connections
port of USB Memory (or MP3
the USB port on the front of the unit.
supplied
FM/AM antenna for
listening
to
the radio.
Connect the AM
Loop
antenna to the AM antenna
connector.
Connect the FM Wire antenna to the FM antenna
connector.
Rear of VCR
Front of DVD/CD Receiver
IN
OUT
Notes:
VIDEO
AUDI
To
AUDIO
prevent
noise
pickup, keep
the AM
from the DVD/CD Receiver and other
To AUDIO OUT
USB
Memory, MP3 Player (or
Memory Card Reader, etc.)
(L/R)/
Be
VIDEO OUT
Loop antenna away
components.
to fully extend the FM wire antenna.
connecting the FM Wire antenna, keep
possible.
sure
After
To AV IN AUDIO
(L/R)/
VIDEO
as
AUD O
R
AM
FM Wire antenna
Loop antenna(supplied)
(supplied)
To Remove the USB Device from the unit
1. Choose
a
different function mode
twice in
(x)
or
press the STOP
a row.
L
AUDIO
R
2. Remove the USB device from the unit.
Notes:
Don't extract the USB device while
Music files
files
can
This unit
(MP3/WMA), image
be played.
can
not
use a
files
operating.
(JPEG) and
DivX
USB HUB.
Recommended
Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
Compatable with : FAT16, FAT32
Only use the memory cards recommended.
Devices which require additional program installation
-
-
when you have connected the unit to
not
In
a
computer
case
of
a
USB HDD, make
sure
to connect
an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive
supported. If there is an extention partition, it will
be supported.
If the drive of USB device is two
folder is
move
displayed
to the initial
on
the
menu
or
more,
a
Digital cameras
supported.
are
not
drive
If you want to
after you select a folder,
screen.
press RETURN.
8
are
supported.
and mobile
phones
are
not
it
as
horizontal
Assembling and Connecting
Speakers
to
the
The front and
speaker
rear
speakers
assemble the front and
stands
are
detached from the
stands. Connect the
as
rear
speaker
speakers
cords and
from
speaker
Speaker System
Connection
Connect the
the
supplied speaker
cables.
To obtain the best
possible surround sound, adjust
speaker parameters (volume, distance, etc.).
the
illustrated.
1. Connect the
terminals
on
cords to the
speaker
appropriate
the bottom of each front and
rear
2. Attach the front and
by rotating
rear
the
speakers
to the
Front
speaker
(Left)
Front
speaker
(Right)
speaker.
stands
speakers using
speaker
screw.
Rear speaker
(Left surround)
Rear speaker
(Right surround)
Center
speaker
InstaliodSeup
Subwoofer
Notes:
Be
sure
to match the
appropriate
--
to
--.
terminal
If the cables
speaker
on
are
cable to the
the components: + to + and
reversed, the sound will be
distorted and will lack base.
If you
use
front
rating, adjust
speakers
the volume
excessive output
on
the
with low maximum
carefully to
speakers.
input
avoid
9
HDMI Connection
HDMI
compatible
TV
HDMI
If you have a HDMI TV or monitor, you can connect it
to this DVD/CD Receiver using a HDMI cable.
1. Connect the HDMI OUT
Receiver to the HDMI
TV
or
monitor
2. Set the TV's
jack on the DVD/CD
jack on a HDMI compatible
H
(H).
source
to HDMI
(refer
to TV's Owner's
manual).
3. In
stop mode, select HDMI mode by pressing
HDMI. Press RESOL.
resolution you wish to
repeatedly
change.
to select the
L
AUDIO
R
Notes:
The
the cable connector
arrow on
body
Resolution
should
face up for correct alignment with the connector
the DVD/CD Receiver.
on
setting
change the resolution for the COMPONENT
OUT by pressing RESOLUTION on the
control. Available resolution settings are as
can
VIDEO
If HDMI cable is not connected, the HDMI button is
not
You
remote
shown below.
operated.
OUTPUT
Available Resolution
CONNECTION
PAL
HDMI
1920
x
VIDEO OUT
1280
x
720
If there is noise
or
lines
on
the screen,
please
check the HDMI cable.
Not all
HDCP-compatible
Tip
pressing
HDMI connection, you can change the
for the HDMI output by
RESOL. on the remote control.
use
(576p, 720p, 1080i)
About HDMI
HDMI
(High
Definition Multimedia
Interface) supports
single digital connection for
digital output to an HDMI or DVI-equipped
both video and audio
easy all-
on a
TV.
Connection to
an
HDMI TV
while connection to
HDMI to DVI
enhanced,
or
a
requires an HDMI cable
DVI-equipped TV requires an
adaptor.
HDMI has the
capability to support standard,
high-definition video plus standard
to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
gigabytes per second, one connector (instead of
several cables and connectors), and communication
to 5
between the AV
source
and AV devices such
as
x
x
VIDEO OUT
1280
x
720
x
1080i
720p
480p
1080i
1920
x
720p
576p
1280
x
1080i
720p
480p
720
x
720
x
720
x
576i
720
x
480i
720
x
576i
720
x
480i
S-VIDEO
720
x
576i
720
x
SCART
720
x
576i
480i
-
HDMI, the HDMI logo and High-Definition Multimedia
Interface
HDMI
are
trademarks
licensing
LLC.
or
registered trademarks
Notes:
If the
picture does not appear on the screen with
analog video connections, change the
resoultion to 480i (or 576i).
For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed at the 576p(PAL) 480p(NTSC) resolution.
1080i, 720p, 576p and 480p does not work with the
analog video connections (MONITOR OUT &
S-VIDEO OUT).
The component (Y/Pb/Pr) will output to black
picture in the RGB mode.
If you change the resolution, the display MENU
(MP3/JPEG/DivX) size is changed.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
the
Please read TV's
of
owner 's
resolution that your TV
Caution:
Changing the
DTVs.
10
1280
:
When you
resolution
an
x
720p
576p
1920
MONITOR OUT
If TV does not support HDCP, snow noise appears
on the screen, or picture may be vibrated.
1920
COMPONENT
DVI devices will work
with this DVD/CD Receiver.
x
NTSC
1080i
manual then set the
can
accept.
resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it
on
again.
Displaying
Disc Information
Initial
on-screen
You
can
loaded
1.
display
various information about the disc
on-screen.
Press DISPLAY to show various
playback
information.
The items
2.
displayed differ depending
playing status.
type
or
You
can
change
Title
select
an
(Track)
--
the disc
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 11 to 14.
To
display
and exit the Menu:
Press SETUP to
display
the
menu.
SETUP will take you back to initial
by pressing v / V and
setting by pressing b / B.
A second press of
screen.
item
select the
or
on
Settings
Current title
(or track).
(or tracks).
number/total number of titles
Chapter Current chapter number/total number
of chapters.
Time
Elapsed playing time.
Audio
Selected audio language or channel.
--
--
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
GENERAL OPERATION
--
Subtitle
Angle
Sound
--
--
--
Selected subtitle.
Selected
angle/total
number of
angles.
no
button is
screen
Press SETUP. The
Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3.
Use v / V to select the second desired
press B to move to the third level.
4.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SETUP
Selected sound mode.
Note:
If
1.
2.
pressed for a
display disappears.
few seconds, the
on-
or
Setup
menu
appears.
PLAY to exit the
option
Setup
InstaliodSeup
then
menu.
LANGUAGE
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Move
Select
OSD
Select
a
language
for the
Setup
menu
and
on-screen
display.
Disc Audio / Subtitle / Menu
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
--
Refers to the
track
original language
the disc
was
Other
To select another
in which
recorded.
language, press number
corresponding 4digit number according to the language code list
on page 24. If you enter the wrong language code,
--
buttons then ENTER to enter the
press CLEAR.
11
DISPLAY
DISPLAY
TV
16:9
Aspect
Display
Widescreen
Mode
Move
TV
Select
Aspect
4:3
Select when
--
16:9
Display
Display
--
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
Mode
Mode
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox
--
Displays a wide picture with bands
portions of the screen.
on
the upper and lower
Panscan
on
do not fit.
12
--
Automatically displays
the entire
screen
the wide
and cuts off the
picture
portions that
AUDIO
5.1
Each DVD disc has
Set the receiver's
variety of audio output options.
AUDIO options according to the
a
type of audio system you
Press ENTER and 5.1
On
Speaker
Front L
0ms
Sync
Size
Small
Volume
0
dB
Distance
0
m
Test
Move
Off
Select
Select
Control
(DRC)
Move
Return
2.
Use b / B to select the desired
3.
Adjust options using
1
With the DVD* format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
4.
Then, you may listen
Select
without
losing clarity
to
a
movie at
a
lower volume
of sound. Set DRC to On for this
effect.
*1:
menu
On
Vocal
Dynamic Range
Speaker Setup
AUDIO
Select
Speaker Setup
DRC
HD AV
for the built-in 5.1 channel
appears.
AUDIO
5.1
following settings
surround decoder.
1.
use.
Speaker Setup
Make the
Dolby Digital only
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
menu.
InstaliodSeup
selection
Speaker
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Vocal
Certain
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
on
the disc will
speaker settings are prohibited by
Digital licensing agreement.
mix into normal stereo sound.
Size
HD AV
Since the
Sync
When
using Digital TV.
signal could not be transmitted
simultaneously because of later transmission of video
signal compared to audio signal.
Because it takes some time to convert analog video
signal to digital one in the Digital TV.
And It means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
Sometimes AV
In the HD AV
Sync menu, you could adjust
to audio signal for simultaneous AV signal
delay
time
transmission
Delay time could be set up with 10msec unit.
(0 300msec)
Delay time is different with each TV Brand. So you
need to adjust optimal delay time complying with
change
speaker settings
settings.
fixed, you
are
the
Dolby
cannot
the
Volume
Press b / B to
speaker. (-5dB
adjust the output
5dB)
level of the selected
~
Distance
If you connected speakers to your DVD/CD Receiver,
the Distance lets the speakers know how far
setting
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
same
time.
Press b / B to
adjust the Distance of the selected
speaker. (You can't adjust front / Woofer speakers)
Test
~
your TV.
Press b / B to test the
of each
signals
the volume to match the volume of test
memorized in the system.
Front Left (L) → Center
Rear
Right (R)
→
→
Front
Rear Left
(L)
speaker. Adjust
signals
Right (R)
→
→
SubWoofer
13
LOCK
Area Code
(Parental Control)
Enter the code of the
LOCK
Rating
Unlock
Password
****
Area Code
US
whose standards
area
used to rate the DVD video disc, based
page 24.
Select "Area Code"
1.
on
the LOCK
on
menu
were
the list
on
then
press B.
Follow step 2
2.
Move
Blocks
playback
of rated DVDs based
are
1. Select
the LOCK
"Rating"
on
on
shown
previous paragraph
Select the first character
3.
Rating
content. Not all discs
as
(Rating).
Select
v / V buttons.
Press B and select the second character
4.
their
using
using
v / V buttons.
rated.
menu
Press ENTER to confirm your Area code selection.
5.
then
press B.
2. To
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
OTHERS
OTHERS
and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
Input
password
a
3. Select
rating
a
Rating
1-8:
restrictions
from 1 to 8
using
PBC
On
DivX(R) Registration
Select
the v / V buttons.
Rating one (1) has the most
and rating eight (8) is the least
Select
Move
restrictive.
PBC
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
Set
Playback
selection, then
enter
or
change password.
1. Select Password
2. Follow
step 2
as
on
the LOCK
shown above
then press B.
(Rating).
change the password, press ENTER when the
"Change" option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the
1.
Press SETUP to
2.
Input
the
ENTER.
display
as
played
the
same
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while "Select" is selected and the
"DivX(R) Registration" option
then press B.
registration code will appear.
Use the registration code to purchase
clear it
using
the
Setup
rent the
www.divx.com/vod. Follow the instructions and
a
disc for
playback
on
this unit.
menu.
6-digit number "210499" and
The password is cleared.
or
VOD service at
download the video onto
the
are
to
Audio CDs.
videos from DivX
can
played according
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX VOD service. For more
menu.
you
Off.
We
forget your password
If you forget your password,
following steps:
or
are
DivX(R) Registration
menu
To
If you
to On
Off: Video CDs with PBC
way
can
(PBC)
the PBC.
Password
You
Control
On: Video CDs with PBC
3.
Press ENTER to exit.
press
Note:
All the downloaded videos from DivX
be
14
played
back
on
this unit.
VOD
can
only
Operation
General features
Buttons
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc tray.
or
During playback,
Press X
SKIP
Discs
Operations
Z
/
>)
press X to pause
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press SKIP (. or >) to go to the
next chapter/track or to return to the beginning of the
current chapter/track.
Press SKIP . twice
briefly
to
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m or M) repeatedly
required scan speed.
DVD : 5 steps (X2, X4, X8, X16, X100)
DivX disc, Video CD : 4 steps (X2, X4, X8, X16)
WMA/MP3, Audio CD : 3 steps (X2, X4, X8)
to
select the
REPEAT
During playback, press REPEAT repeatedly to select
desired repeat mode.
DVD Video discs: Chapter/Title/Off
a
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
A-B
During playback, each press of A-B button to select point
point B and repeats a sequence from point A
(Starting point) to point B (End point).
A and
Press REPEAT A-B to exit.
ZOOM
During playback or pause mode, press ZOOM to enlarge
image (3 steps).
You can move through the zoomed picture using bBvV
the video
buttons.
TITLE
If the current DVD title has
appears
on
the
screen.
a
menu, the title
Otherwise, the disc
menu
menu
may
appears.
DVD MENU
(SUBTITLE)
The disc
menu
appears
on
the
screen.
During playback, press SUBTITLE repeatedly
language.
to select
a
desired subtitle
(AUDIO language) During playback, press AUDIO repeatedly
different audio language or audio track.
(AUDIO channel)
Press AUDIO
to hear
a
repeatedly during playback to hear a
(STER., LEFT or RIGHT).
different audio channel
SLOW
Pause mode, press SLOW (m or M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Video CD : T (1/2, 1/4, 1/8, 1/16)
15
Notes
general features:
on
Last Scene
If you press SKIP
(>) once during Repeat
Chapter (Track) playback, the repeat playback
Memory
This receiver memorizes last
that is viewed. The last
cancels.
on some
if you remove
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
DVDs.
The A-B repeat function is available
current title.
only
in the
Note:
This receiver does not memorize the
Additional features
switch off the receiver before
System
Time Search
To start
at any chosen time
playing
on
Press DISPLAY
2.
Press v / V to select the time clock icon and
during playback.
Input
the
start time in
required
hours, minutes, and
Playback
disc if you
the disc.
on
the front
panel
or
When the selected system does not coincide with
right.
Press ENTER to confirm.
a
play
Remote Control for more than 5 seconds to be able to
select a system (PAL, NTSC or AUTO).
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4.
of
to
Select
window, press and hold P./STEP
"--:--:--" appears.
seconds from left to
scene
commencing
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display
the disc:
1.
3.
from the last disc
remains in memory
the disc from the receiver or
even
Zoom may not work
scene
scene
the system of your TV, normal colour
not be displayed.
NTSC:
may
Select when DVD/CD Receiver is connected
with NTSC-TV.
starts from the
selected time.
picture
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
Marker Search
To enter
You
Marker
a
To enter
points.
desired
point
the TV
screen
a
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
Your Remote Control is
Receiver
on
markers.
or
Clear
1.
During
disc
search
menu
2.
Within 10 seconds, press b / B to select
number that you want to recall or clear.
3.
Press ENTER and
marked
scene.
a
marker
starts from the
Or, Press CLEAR and the marker
You
on
can play any marker by
the marker search menu.
inputting
Before
using
different
the Remote
of
operating
2.
The POWER
operate
the
Setting
its number
for your LG TV.
Control, press the TV
be
sure
on
(to operate
Remote Control
VOLUME
are
Stop
16
appears when you leave the unit in
mode for about five minutes.
screen saver
used to
(+/-), and
operate
LG TV.
Hold POWER
(TV)
and press CHANNEL( E / D ) button
on or off.
until the TV
Note:
operate your particular TV, try
originally
supplied
(LG
Star)
Due to the variety of codes used by manufacturers, OUR
COMPANY cannot guarantee that the remote control will
operate every model of LG TV.
the other code
or use
the Remote Control
with the LG TV.
The
a
Remote Control Codes for LG TV
If the Remote Control does not
Screen Saver
to select
to press the TV first.
(TV), CHANNEL(E/D),
INPUT buttons
your DVD/CD
operated.
device),
repeatedly
number is erased from the list.
4.
capable
limited functions of LG TV.
as
To switch the Remote Control mode
press SEARCH. The marker
appears on the screen.
playback,
playback
well
the device to be
Marked Scene
a
as
Follow the instructions below to
1.
To Recall
the TV
Controlling
from up to nine memorized
marker, press MARKER at the
playback
start
can
and Gold
Playing
This unit
an
Audio CD
play
can
Audio CDs
or
or
MP3/WMA file
MP3/WMA files
recorded media.
ENTER and
playback
playback
or
1.
2.
0:00:00
contain 300 tracks.
disc.
Select
a
track
"
on
the "List", then press PROG.
or
icon then press ENTER to place
the selected track on the "Program" list. Repeat to
JPEG
List
(Add)"
additional tracks
place
1/104
MP3
Program
List
a
select
1/12
Audio CD
Insert
Audio CD and MP3/WMA Discs:
track/file then press PLAY or
starts. You can use variable
a
functions. Refer to page 15.
0:00:00
can
program
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
Audio CD, a menu appears on the TV screen.
Press v / V to select
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
on
the list.
Program
Track1
Music Folder 1
Track2
Music Folder 2
Note:
Track3
Music Folder 3
Track4
Music Folder 4
Track5
Music Folder 5
Track6
You
Music Folder 6
Track7
Music Folder 8
add all tracks in the disc. Select
3.
Press MENU to
move
a
PHOTO word
on
top of the
menu
is
4.
Press PLAY
?
with this
player
5.
-
-
-
-
that has
a
file extension other than
an
MP3/WMA file
".mp3"
CD-R
?
If you record MP3 / WMA files using software that cannot
create a file system (eg. Direct-CD) it is impossible to
format should be ISO 9660
1.
playback MP3 / WMA files.We recommend that you
Easy-CD Creator, which creates an ISO 9660 file
system.
?
?
File
names
should have
must
incorporate
They
should not
a
use
in
played
once.
To
resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
Tracks
Press REPEAT when
2.
playing
Press REPEAT to select
?
?
a
disc. The repeat
?
a
desired repeat mode.
TRACK: repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
an
/ ?
*
:
"
<>letc.
?
Playback begins
icon appears.
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
list have
Repeat Programmed
/ ".wma".
?
physical
ENTER to start.
is limited
Sampling frequency: within 32 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 32 320kbps (MP3), 40
192kbps (WMA)
The DVD/CD Receiver cannot read
or
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
highlighted.
follows:
within 24
?
compatibility
icon
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
"Program"
MP3 / WMA disc
?
( Add All)"
page.
to the next page.
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
as
"
then press ENTER.
Tips:
On
can
Music Folder 7
Track8
The total number of files
on
the disc should be less than
Erasing
requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that
permission
is
required
in
Track from
"Program"
Operation
List
1.
Use vVto select the track that you wish to
from the Program list.
2.
Press CLEAR.
999.
This DVD/CD Receiver
a
erase
"
Alternatively, select
(Delete)"
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks
Erasing
on
the
the list.
Complete Program
Use v / V to select
"
(Del all)",
List
then press
ENTER.
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the
copyright
Note:
The programs
are
also cleared when the disc is removed.
owner.
17
Viewing
a
JPEG file
JPEG
JPEG disc
limited
This unit
can play discs with JPEG files.
playing JPEG recordings, read the
Recordings on right.
Before
JPEG
1.
Insert
notes
on
?
with this
player
is
Depending
upon the size and number of JPEG
a long time for the DVD/CD
files, it could take
disc and close the tray.
The PHOTO menu appears on the TV
Receiver to read the disc's contents. If you don't
display after several minutes,
a
see an on-screen
screen.
of the files may be too large
reduce the
resolution of the JPEG files to less than 2M pixels
some
PHOTO
List
compatibility
follows:
as
as
Preview
---
2760
x
2048
pixels
and burn another disc.
JPEG Folder 1
JPEG Folder 2
?
JPEG Folder 3
JPEG Folder 4
The total number of files and folders
on
the disc
should be less than 999.
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
?
JPEG Folder 8
?
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
If you are in a file list and want to return to the
Folder list,
previous
the v / V buttons
on
viewing a file, you can press STOP
previous menu (JPEG menu).
to
move
to the
Note:
When
viewing
a
JPEG
file, the resolution is changed 480p if
the resolution set to 1080i. You
720p
or
can
change
the resolution for
480p.
Tips:
There
>
four Slide
are
(Slow),
>>
Use v /V /b
to select the
If you set
:
Speed options
(Normal), >>> (Fast) and II (off).
/B to highlight the Speed. Then, use b / B
option you want to use then press ENTER.
to
Speed option
Off, Slide is
not active.
Slide Show
Use vVbBto
press
highlight the
(Slide Show)
ENTER.(You can not change resolution)
then
Still Picture
1.
Press PAUSE/STEP
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide show, press PLAY
PAUSE/STEP again.
Moving
or
>)
once
while
or
viewing a
previous file.
picture
Press b / B
18
(.
to advance to the next
To rotate
picture
press
to another File
Press SKIP
picture
or
during showing
clockwise
or
a
picture
to rotate the
counter-clockwise.
?
?
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
Ensure that all the selected files have the
extensions when
the
and press ENTER.
highlight
remote to
3.
use
Some discs may be incompatible due to a
different recording format or the condition of disc.
copying
If the files have
".jpe"
please
them
File
rename
names
without
able to be read
though
the files
Windows
by
".jpg"
layout.
".jpeg" extensions,
".jpg" file.
".jpg"
extension will not be
this DVD/CD Receiver. Even
are
Explorer.
or
as
into the CD
shown
as
JPEG
image
files in
Playing
Using
1.
a
DivX Movie file
this DVD/CD Receiver you
Insert
a
appears
can
play
DivX disc
as
DivX disc.
disc and close the tray. The MOVIE
on the TV screen.
menu
compatibility
with this
player
is limited
follows:
?
Available resolution size of the DivX file is under
?
The file
800x600
MOVIE
(W
x
name
H) pixel.
of the DivX subtitle is available
by
45 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
If there is
code to express in the DivX
as
mark on the
impossible
"
file, it may be displayed
Movie Folder 3
Movie Folder 4
Movie Folder 5
"
_
display.
Movie Folder 6
Movie Folder 7
Movie Folder 8
?
If the number of the
screen
second, this unit may
normally.
per 1
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
?
not
over
30
operate
If the video and audio structure of recorded
file is not
interleaved,
outputted.
and
highlight
frame is
either video
or
audio is
press ENTER.
3.
If you want to view
v / V to
4.
highlight
particular file, press
file and press ENTER
Playable
a
a
or
PLAY.
".avi ",
DivX file
".mpg ", ".mpeg ",
".divx"
Press STOP to exit.
Notice for
displaying
If the subtitle does not
display properly during playback,
displayed properly
Tips:
Press MENU to
move
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
?
the Divx subtitle
press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle
is
?
Playable
to the next page.
?
On
a
CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE and MUSIC, PHOTO and MOVIE
word
top of the
on
menu
is
Playable
highlighted.
Codec format
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Audio format
"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 32 48 kHz
-
Notes:
Be
within 24
to select "SUBTITLE ON" mode
sure
pressing
DivX file
a
Bit
40
Operation
(MP3),
-
-
.
When the subtile has
the file,
by
playing
the subtitle file every time before
?
48kHz
(WMA)
rate: within 32
320kbps (MP3),
192kbps (WMA)
-
original
more
subtile is
than two
only
languages
in
available.
The DivX files in your memory card
can
not be
played.
You
not adjust sound mode and
during the DivX file playing.
can
sound
VIRTUAL
19
DVD Audio Discs
DVD Audio is
success
Moving
disc format building
provide high quality,
a new
of DVD to
on
the
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1.
Press DISPLAY
2.
Press 3/4 to select
3.
Press 1/2
the disc itself.
DVD Audio
provide higher quality stereo than
a sampling rate of up to 192kHz
44.1kHz for CDs). DVD Audio digital
(compared
to
sound
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
can
(compared
typical
the data
DVD Audio disc contains up to seven times
of a CD. This additional space is
capacity
used for music, either Advanced Resolution multiquality that is closer to the artist's
channel sound
master
during playback
Group
can
Audio CDs with
A
to another GROUP
Some DVD Audio discs divide content into different
recording
or
Audio discs contain
for
longer recordings. Many
on-screen
text, such
as
DVD
artist
biographies, playlists, or lyrics. Some DVD Audio
photo galleries or video clips.
discs contain
a
or
on
in stop mode.
icon.
the numbered buttons
(0-9)
to select
group number.
Note:
Sometimes the author of the disc creates hidden
content that
can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you'll find it on the
disc's jacket cover or on a web site). This password
control isn't dictated by your DVD/CD Receiver
it is
---
a
function of the disc.
Since the
available
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
Viewing
another PAGE
of the
some
on-screen
Since DVD Audio discs
can
hold
a
lot of content, there
on the disc.
are
various ways to
see
1.
Press DISPLAY
during playback.
2.
Press
3.
Press 1/2 to select
3 / 4 to
select
what's available
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Note:
Since the
of the
available
20
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
on-screen
some
the Radio Stations
Presetting
You
can
Before
Listening
preset 50 stations for FM and AM (MW).
tuning,
make
sure
Preset radio stations in the DVD/CD Receiver's
that you have turned down
the volume.
AM
memory first
(MW)
on
the Remote Control until FM
appears in the
display
or
Press BAND until FM
1.
window.
Press and hold
TUN.(-/+)
frequency indication
until the
starts to
Press PRESET +/-
change,
tunes in
Scanning stops
when the DVD/CD Receiver tunes in
a
one
Remote
preset
Press PRESET +/-
5.
on
the Remote Control.
number will flash in the
on
display
repeatedly
preset
station at
Press PROG/MEMO
Repeat steps
the Remote Control
again.
To listen to
non-preset
Use manual
For manual
3 to 6 to store other stations.
a
station with
Press
TUN.(-/+) repeatedly
station manually.
a
weak
or
signal
To select
tuning,
appeared
and then press PROG/MEMO
cleared.
in the
again,
display
window
the stations
are
If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "ERASE ALL" display will go off by itself and
to normal mode.
or
(DVD/CD, AUX, USB).
radio stations
tuning
in step 2.
TUN.(-/+) repeatedly.
press and hold TUN.(-/+) for
the front panel.
on
radio station
the number buttons
on
directly
the Remote
preset radio station directly.
preset station 4, press 4 on
the Remote Control. To listen to preset station 19,
For
example,
a
to listen to
press 1 then 9
(within
3
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
in the
effect, but
the button
again
seconds).
noisy
panel so that "ST."
display window. There will be no
the reception will improve. Press
on
the front
to restore the stereo effect.
To
Note:
If all stations have
already
been entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
change
press
tuning,
preset
a
can use
Control to select
Press and hold PROG/MEMO for about two seconds
To
time.
in step 3 to tune in the
To clear all the stored stations
change
automatic
about two seconds
You
and "ERASE ALL" is
a
Press POWER to turn the DVD/CD Receiver off
For automatic
To tune in
the Remote
-
select another function mode
The station is stored.
7.
on
To turn off the radio
window.
the Remote Control to
on
appears in the
or
select the preset number you want.
6.
(MW)
by rotating VOLUME on the
by pressing VOLUME + or on the
Control repeatedly.
Adjust
panel
front
Press PROG/MEMO
AM
the volume
3.
station.
A
or
Control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
for about two seconds
then release.
4.
the
The last received station is tuned in.
2.
(MW) changes alternately.
3.
on
window.
display
And then every time you press BAND, FM and AM
2.
radio stations"
(see "Presetting
left).
Press BAND
1.
to the Radio
improve reception
Reorient the supplied antennas.
a
the preset number, follow the steps 5-6
as
above.
21
RDS
Programme Search (PTY)
Operation
This unit is
A
which
broadcasts with Programme
indicate the type of material
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
Now in
use
in many countries, RDS is
a
system for
RDS TUNING
FM station is tuned in and it contains RDS
data, the unit will automatically display the station's
call
sign
Window
and the RDS indicator will
as
well
as
light
in the
Display
indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radiotext (RT) and Clock Time (CT) if transmitted by
the station.
RDS DISPLAY OPTIONS
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
that appears when
RDS operation the
station is first tuned. In normal
a
display
name, broadcast network
will indicate the station
or
call letters.
Pressing RDS
cycle through
the Remote Control enables you to
the various data types in the sequence:
on
(PS↔FREQUENCY↔PTY ↔RT↔CT)
PS
(Programme
Service
The
name)Display Window.
channel is shown in the
name
of the
with
along
an
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
EASY M
Easy Listening
LIGHT M
Light
CLASSICS
Classical Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
Programmes
Programmes
Programmes
Programmes
Phone-In
Travel and
LEISURE
Leisure and
RT
JAZZ
Jazz Music
COUNTRY
Country
NATION M
National Music
OLDIES
Oldies Music
A "text" message contains special
information from the broadcast station. Note that
(Radiotext)-
this message may scroll
permit
CT
across
the
display
to
message.
(Time
controlled
by
the
channel)-
Enables
the unit to receive the actual time and show it in
the
Display
Window.
Note:
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
being transmitted, the
Display Window will show a PTY NONE, RT NONE,
CT NONE, PS NONE message.
Touring
2.
Hobby
Music
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
You may search for a specific
by following these steps:
1.
Music
Music
PHONE IN
of
of the
Music
TRAVEL
(Programme type recognition)- The name
Display
explanation
Speech Programme
the programme type is shown in the
Window.
PTY
Message
Broadcast Information
Programme Type (PTY)
Press BAND to select FM mode.
Press PTY
on
the Remote Control, the
show the last PTY in
Press PTY
4.
When the PTY is selected, press
repeatedly
unit will go into
tuned,
an
display
will
use.
3.
station is
22
ability to encode
Type (PTY) codes that
being broadcast. The
list shows the abbreviations used to
indicate each PTY
PTY.
the correct time.
a
benefit of RDS is its
following
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
When
major
to select
a
desired PTY.
TUN.(-/+).The
automatic search mode.
the search will
stop.
When
a
Sleep
You
can
Timer
XTS/XTS pro
Setting
set the DVD/CD Receiver to turn off
automatically
at
specified
a
The SLEEP indicator and
display
sleep
sleep
XTS ON
The
unique
XTSON
When
can
check the time
remaining
playing the movie with the weak bass sound
relatively to the general music, it enforces the
sense of sound at woofer for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
before the DVD/CD
Receiver turns off.
Press SLEEP. The
remaining
time appears in the
window.
display
Note
Dimmer
The XTS
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
mode is
temporarily
disabled when
from 2.1 CH to 5.1 CH and it is enabled when
repeatedly.
NORMAL
Press MUTE to mute your unit.
can mute your unit in order, for example, to
answer the telephone, "MUTE" indicator flashes in the
display window.
Using Headphone
Connect a stereo headphone
PHONES connector.
Selecting input
can use
VCRs
or
plug ( 3.5mm)
press VIRTUAL the
into the
VIRTUAL sound.
Display
Effect
2.1 ch.
VIRTUAL
3D STEREO
5.1 ch
VIRTUAL
Multichannel sound
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
source
other units connected to the AV
connector. Refer to the owner's manual
supplied with
operation.
the unit for further information
repeatedly on the Remote
input source.
setting
Source
when
IN, EURO AV
Press AUX
VIRTUAL sound
Jack
speakers are automatically disconnected
plug in a headphone (not supplied).
on
the
Multichannel sound
Control to
select the desired
The Multichannel sound makes
Each time you press this button, the mode of the
function changes in the following sequence:
ch sound therefore this mode
AUX
:
for
(L/R)
& VIDEO IN Connectors.
selecting
TV-AUDIO: for
the
analog signal
selecting
the TV audio
also select the
on
5.1 ch feel 10.1
a
emotion
can
Sound Mode
signal
from SCART.
You
one
FUNC. button
a
provides
which you are involved with sound and you
feel detailed sound.
from AV2 AUDIO IN
Note
can
it
XTS-P and XTS mode tune off
You
You
changing
changing
to 2.1 CH.
Mute
You
XTS-P ON...
creates the
Note:
you
→
sound quality of the LG Technology
optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
setting
SLEEP180→150→120→90→80→70→60→50→40→
The
NORMAL
→
XTS-P ON
window.
30→20→10→OFF
You
in
time.
time appears in the
Each time you press SLEEP the
changes in the following order.
2.
setting changes
the
Press SLEEP to set the desired
1.
Each time you press XTS pro the
following order.
time.
the
input source by pressing
panel.
the front
Press and hold down this button about 3 seconds,
then press repeatedly to select input source.
enjoy surround sound simply by selecting
pre-programmed sound fields according to
program you want to listen to. (2 ch. sound only)
can
of the
BYPASS
ON STAGE
STUDIO
CLUB
THEATER 1
CHURCH
PL ll MOVIE
→
→
→
→
→
PL ll MUSIC
→
→
→
HALL
→
PL ll MTRX
→
BYPASS...
Note:
Initial sound mode is BYPASS
23
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
24
code from this list.
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
?
picture.
the power cord
wall outlet.
securely
Insert
that the DVD or,
Plug
The TV is not set to receive DVD
signal
?
Select the
?
sound
or
The video cable is not connected
?
The connected TV power is turned off.
?T
?
The
?
a very low-level
sound is heard.
only
connected with the
equipment
signal output.
The audio cables
not connected
are
?
is
the TV.
urn on
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
Connect the audio cable into the
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
connecting
cable is
damaged.
dirty.
poor.
The DVD/CD Receiver
does not start playback.
input
screen.
The power of the equipment connected
with the audio cable is turned off.
?
video
jacks securely.
securely.
playback picture
appropriate
the
urn on
equipment
connected
with the audio cable.
?
Insert
a
it with
disc.
new one.
(Check
that the DVD,
audio CD indicator in the DVD
is lit.)
?
An
display
jacks securely.
audio cable is not set to receive DVD
?
The
(Check
Connect the video cable into the
?
securely.
no
disc.
mode on the TV so the picture from
the DVD/CD Receiver appears on the
output.
TV
There is
a
into the
audio CD indicator in the DVD
is lit.)
does not work.
No
service.
Cause
?
disc is inserted.
unplayable
Insert
a
playable
disc.
or
display
(Check the
Regional
disc type, colour system and
code.)
?
The disc is
?
The disc is not
placed upside
placed
down.
within the
?
guide.
?
Place the disc with the
down.
Place the disc
correctly
?
The disc is
?Amenu
?
Loud hum
heard.
or
noise is
The
is
dirty.
on
Rating
?
The disc is
?
The
the TV
screen.
level is set.
speakers
poorly.
are
The DVD/CD Receiver is located too
close to the TV.
guide.
?
Press the SETUP button to turn off
the menu screen.
Cancel the
rating
Rating
function
or
change
level.
?
Clean the disc.
?
Connect the
speakers
and
components securely.
connected
?
the disc tray
inside the
Clean the disc.
the
and components
side
?
?
dirty.
on
playback
?
Move your TV away from the audio
components.
25
Cause
Symptom
Radio stations cannot
be tuned in.
?
The antenna is
Correction
positioned
or
connected
poorly.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
The
signal strength of the stations is
(when tuning in with automatic
tuning).
too
?T
une
in the station
weak
?
No stations have been preset or preset
stations have been cleared (when
?
Preset the stations
manually.
(page 21).
tuning by scanning preset stations).
The Remote Control
does not work
properly.
?
The Remote Control is not
remote
sensor
pointed
at the
?
of the DVD/CD Receiver.
Point the Remote Control at the remote
sensor
of the DVD/CD Receiver.
?
The Remote Control is too far from the
DVD/CD Receiver.
?
?
There is
?
Remove the obstacle.
?
Replace
?
Press DIMMER
an
obstacle in the
path
of the
Use the Remote Control within about 23
ft (7 m).
Remote Control and the DVD/CD
Receiver.
The front
display
26
panel
is too dim.
?
The batteries in the Remote Control
flat.
?
Nothing
display.
is
displayed
on
the front
are
panel
the batteries with
on
new ones.
the Remote Control.
Specifications
Power
Genral
Refer to main label
Net
3.9
kg
430
x
External dimensions
CD/ VD
Refer to main label
supply
consumption
Weight
Power
(W
x
H
x
D)
Tuner
Laser
Semiconductor laser,
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
PAL 625/50, NTSC 525/60
[MW]
Amplifer
Operation
(1 kHz,
(1 kHz, at 1W position) (20 kHz LPF)
(p-p), 75 Ω, negative sync., RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1/ SCART (TO TV)
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 1
1.0 V
108.0 MHz
87.5
Stereo mode
100W
Surround mode
Front: 100W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 100W
Inputs
Outputs
AV IN
-
or
65.0
-
74.0
MHz, 87.5
-
108.0 MHz
10.7 MHz
60 dB
140
(Mono)
8,000 Hz
-
522
1,620 kHz
-
or
520
-
1,720 kHz
450 kHz
+
100W
(Rated Output Power 100W, 4Ω at 1 kHz, THD
100W (Rated Output Power 100W, THD
+
Surround*: 100W
+
Subwoofer*: 200W
10
10
%)
%)
100W
(Rated Output Power 100W, 4Ω at 1 kHz, THD 10 %)
(Rated Output Power 150W, 3Ω at 30 Hz, THD 10 %)
S-VIDEO, MONITOR, PHONES: (32 Ω, 1.0 V)
Type
Impedance
Frequency Response
2
Speaker
Center
Way
80
Speaker
-
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
subject
(1m)
100 W
200 W
300x1350x300mm
5.35kg
to
change
Passive Subwoofer
2
Way
3
Speaker
(LHS-76IAW)
1
1
Way
4Ω
18,000 Hz
86 dB/W
Rated
are
3
speaker
(LHS-76IAC)
4Ω
Sound Pressure Level
specifications
LPF/A-Filter)
0.5 %
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
and
nm
NOP -6 dB, 20 kHz
(LHS-76IAS)
Designs
650
wavelength
More than 70 dB
Front/Rear
Speakrs
status: Horizontal
150 Hz to 18 kHz
More than 75 dB
COMPONENT VIDEO OUT
AM
mm
5°C to 35°C,
5% to 85%
S-video output
FM
295
x
Temperature:
Video output
Video
57
Operating conditions
Operating humidity
80
-
18,000 Hz
86 dB/W
(1m)
100 W
200 W
500x160x155mm
1.73kg
Speaker
3Ω
40
-
1,500 Hz
82 dB/W
(1m)
200 W
400 W
240x450x390mm
10.5kg
without notice.
27
P/NO
:
3834RT0007K
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising