LG | 21FB7BG | Owner's Manual | LG 21FB7BG Owner's Manual

LG 21FB7BG Owner's Manual
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
38289U0485A
(MC059B,
124D
TX)
b
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation / Front panel
4
Basic
7
operation
Programme selection
Volume adjustment / Quick view
On and off /
Mute function
On
On
screen
language
selection
(option)
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
9
Setting up
edit
Favourite programme
Calling the programme table
Programme
Picture adjustment
PSM (Picture Status Memory)
CSM (Colour Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)
15
Sound
17
adjustment (option)
(Sound Status Memory) / Sound adjustment
X-WAVE (Wireless Sound) (option)
Turbo sound selection (option)
Sound output selection (option)
Stereo/Dual reception (option)
NICAM reception (option)
SSM
Time
setting
Setting the
Setting the
20
clock
On/Off timer
Auto off
Other functions
TV and AV modes / Auto AV switching
Child lock / Blue back (option)
Games (option) / Sleep timer
21
(option)
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Headphone socket (option)
Troubleshooting
2
check list
24
27
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
place anything containing liquid on top
fire or could give an electric shock.
of the set, this may
cause a
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions can also be
panel of the set.
adjusted
with the buttons
on
the front
Remote control handset
Before you use the remote control
teries. See the next page.
1.
POWER
MUTE
POWER
switches the set
handset, please install the bat-
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
standby.
1
123
2.
select
a
number.
456
2
3.
789
MENU/INDEX
0
TV/AV
TV
4.
PR
VOL
.
VOL
OK
PR
Q VIE
EYE/ *
(only
TELETEXT
(option)
on or
off.
automatically.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
SSM/
programmes
F / G
T
LIS
6
SLEEP
OK
7
FAVOURITE
accepts your selection
/
8
PICTURE
TURBO/
or
displays
the current mode.
SOUND
6.
9
Q.VIEW
returns to the
7.
8.
9.
previously
PSM (Picture Status
recalls your preferred
viewed programme.
Memory)
picture setting.
FAVOURITE
selects
4
index page in the teletext mode
() /
() (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
scans
()
W
PSM
an
()
5.
5
a menu.
selects
switches the eye function
I / II /
EYE /
(or INDEX)
models). (option)
3
4
MENU
selects
a
favorite programme.
TURBO PICTURE / SOUND BUTTON
selects Turbo picture and sound.
(option)
Location and function of controls
10. MUTE
switches the sound
on or
off.
11. TV/AV
selects TV
or
AV mode.
switches the set
12. I/II/ *
from
on
standby.
(option)
selects the language during dual
selects the sound output.
language
broadcast.
(option)
13. LIST
POWER
displays
MUTE
the programme table.
10
1
2
3
4
5
6
7
8
9
MENU/INDEX
0
TV/AV
14. SLEEP
sets the
15. SSM/ *
sleep
timer.
(Sound Status Memory) (option)
preferred sound setting.
recalls your
16. SURROUND
( º / * ) (option)
11
TV
selects surround sound.
*
:
PR
COLOURED BUTTONS
TELETEXT
models)
I / II /
EY E /
No function
or
: These buttons
programme edit.
are
used for teletext
(only
VOL
.
Battery
installation
VOL
OK
PR
Q VIE
12
()
()
T
LIS
W
13
The remote control handset is
powered by two AAA type batteries.
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
To load the
PSM
SSM/
SLEEP
FAVOURITE
/
PICTURE
14
15
16
SOUND
-
TURBO/
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
AV2
6
panel
21FX4 series
21FB3 series
VIDEOL/MN
ON/OFF
MENU OK
VOL
PR
VIDEO
AV
VIDEO AUDIO
L/MONO AUDIO R
AV3
AUDIO
R
1234
7
5
8
1234
5
6
7
6
7
17/21FB7 series
21FD1 series
7
MENU
OK
PR
VOL
AUDIO
6
VIDEO
1234
5
123
4
5
AV
21FB5 series
21FX5 series
7
VIDEO
MENU
RAUDIO
6
OK
VOL
L
A
R
PR
ON/OFF
AV
L/MON
1
VIDEO
234
5
8
6 7
1
8
235
4
AV2
21FC9 series
AV2
21FB2 series
M ENU
7
R
MENU
VOL
OK
PR
4
OK
ON/OFF
5
AUDIO
6
VIDEOL/MN
PR
ON/OFF
123
4
5
8
3
1
PR
8
5
2
VOL
1.
2.
3.
4.
5.
MAIN POWER (ON/OFF)
switches the set on or off.
6.
(AV
POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby mode.
dims when the set is switched on.
REMOTE CONTROL SENSOR
Note : Only use the supplied remote control
handset. (When you use others, they'll be
not able to function.)
MENU
selects
a menu.
OK
accepts your selection
rent mode.
F / G (Volume
or
displays
the
Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
6
AUDIO
cur-
or
(or AUDIO-L/R)/VIDEO
AV2) (option)
IN SOCKETS
Connect the audio/video out sockets of
external equipment to these sockets.
7.
HEADPHONE SOCKET
Connect the headphone
8.
EYE
(option)
adjusts picture according
conditions.
(option)
plug to this
to the
socket.
surrounding
Note : Shown is a simplified representation of
front or side panel. Here shown may be somewhat different from your set.
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E TV/AV
or NUMBER buttons on the remote control handset to switch it
,
on
fully.
3.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
4.
Press the main power button
to switch the set off.
again
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the D / E
or
NUMBER
POWER
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
buttons.
MENU
Volume
adjustment
I / II
Press the F / G button to
adjust
the volume.
PR
VOL
/
()
VOL
OK
Quick view
PR
Press the Q.VIEW button to view the
were
previous programme
you
()
Q VIE
W
.
watching.
SSM/
Mute function
SOUND
Press the MUTE button. The sound is switched off and the
> appears.
You can cancel it by pressing the
TURBO SOUND button.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
MUTE,
on
the
F
/ G
,
SSM/ *
display
,
I/II/ *
TURBO/
,
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
on screen
Press the OK
4.
Repeatedly
viewing.
or
displays
will appear in the selected
F button to select the
Special
language.
menu.
press the MENU button to return to normal TV
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
2.
3.
4.
Press the MENU button and then D / E button to display each menu.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down menu.
Change the setting of an item in the sub or pull-down menu with
F / G or D / E
You can move to the higher level menu with OK or F button and
to move to the lower level menu press the G button.
.
Note :
a.
In mono models, the Sound menu does not appear.
b.
In some models, Turbo Pic. will not display in the Picture menu.
c.
In some models, Turbo.Snd. AVL, Balance, Woofer, X-WAVE
or Treble, Bass will not display in the Sound menu.
d. In some models, Language, Blue back, Game, Booster
will not display in the Special menu.
,
MENU
(
PR
VOL
{
Manual
{
System
Storage
{
I
Prog.Oedit
{
Normal
{
DK
Favourite
{
Turbo
{
M
(
O}i{OOKOMENU
)
Station
VOL
OK
PR
)
()
AutoOprog.
()
(
)
PSM
{
TurboOPic.
{
CSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
(
)
(
)
SSM
{
TurboOSnd.
{
AVL
{
Balance
{
Woofer
{
Treble
{
Bass
{
X-WAVE
{
)
)
{
Fine
{
Search
{
Name
{
{
2
O}i{O OKOMENU
DeleteOOOCopy
MoveOOOOOSkip
)
Clock
{
OffOtime
OnOtime
{
AutoOoff
{
menu
{
O}i{OOKOMENU
Language
Input
{
BlueOback
{
ChildOlock
{
menu
{
O}i{OOKOMENU
Special
8
{
Channel
menu
O}i{OOKOMENU
TV programme
Storage
System
(
Time
(
O}i{OOKOMENU
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
Sound
(
BG
menu
O}i{OOKOMENU
Picture
{
menu
O}i{OOKOMENU
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
O
O
be stored.
tuning
OiO
O
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto prog..
Press the G button to display the Auto prog. menu.
OiO
4.
1
2
3
4
5
6
7
8
9
O
Press the G button. Select a TV system with the D / E button
the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Storage.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo.
on
5.
6.
7.
8.
9.
MENU
0
PR
VOL
()
VOL
OK
PR
()
Note :
a.
Turbo is faster than Normal and in some models, these
searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Normal
{
0000
Turbo
OO
{0000
OOO
OO
(Normal search)
OOO
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Prog. edit menu
appears on the screen. See the 'Programme edit' section to edit
the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting up
Auto programme scan
To automatically scan the pictures of stored programmes, press
the D ( D
D )or E ( E ) button for about 3 seconds. The picture of stored
programmes appears on the screen one by one.
O
O
OiO
TV stations
E
To stop auto programme
buttons.
scanning,
Manual programme
tuning
press any button except VCR
O
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
3.
1
2
3
4
5
6
7
8
9
MENU
OiO
0
4.
5.
PR
VOL
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual.
Press the G button to display the Manual menu.
()
VOL
OK
PR
6.
7.
8.
()
9.
10.
11.
12.
13.
14.
15.
O
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number
under 10 is entered with a numeric '0' (or '00') in front of it, i.e.
'05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Search
{
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
TV stations
Setting up
Assigning
1.
Repeat
a
station
name
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Name.
3.
Press the G button
O
O
4.
on the Name pull-down
Press the D button. You can use a blank, +,
to 9 and the alphabet A to Z.
5.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
6.
Press the OK button.
7.
Repeatedly
viewing.
menu.
the numeric 0
-,
OiO
O
press the MENU button to return to normal TV
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1
2.
3.
4.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
Repeat
Press the D / E button to select On
pull-down
or
Off
on
MENU
the Booster
PR
menu.
5.
Press the OK button.
6.
Repeatedly
viewing.
press the MENU button to return to normal TV
VOL
()
VOL
OK
PR
()
11
Setting up
{
{
{
{
AutoOprog.
Manual
Prog.Oedit
Favourite
(
)
O}i{OOKOMENU
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
Press the MENU button and then D / E button to select the
Station menu.
2.
Press the G button and then D / E button to select Prog. edit.
Press the G button to display the Prog. edit menu.
3.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
1
2
3
4
5
6
(
)
Deleting
1.
7
MENU
8
9
2.
a
Select
O}i{OOKOMENU
programme
programme to be deleted with the D / E
Press the RED button twice.
a
The selected programme is deleted,
grammes are shifted up one position.
0
all the
or
F / G button.
following
pro-
Copying
1.
2.
PR
()
VOL
VOL
()
or
All the
one
Moving
1.
PR
a programme
Select a programme to be copied with the D / E
Press the GREEN button.
2.
3.
4.
a
Select
following
programmes
are
shifted down
F / G button.
position.
programme
programme to be moved with the D / E orF/Gbutton.
Press the YELLOW button.
a
Move the programme to the desired programme number with
the D / E orF/Gbutton.
Press the YELLOW button again to release this function.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
Move0Off
(
)
O}i{OMENU
1.
a programme number
Select a programme number to be
F / G button.
2.
Press the BLUE button. The
Skipping
3.
with the D / E
or
skipped programme turns to blue.
again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER butPress the BLUE button
tons
or
Repeatedly
12
skipped
select it in the programme edit
or
table
menu.
press the MENU button to return to normal TV
viewing.
Setting up
TV stations
Favourite programme
O
O
This function lets you select your favourite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite.
3.
Press the G button to
display the Favourite
menu.
OiO
O
menu.
O
00
O
Favourite
{
OiOOO
4.
Press the D / E button to select
5.
desired programme with the F / G button.
To store another programme, repeat steps 4 to 5.
6.
Select
--
-----.
a
You
7.
8.
can store up to 8 programmes.
Press the OK button.
Repeatedly
viewing.
Repeatedly
press the MENU button to return to normal TV
MENU
press the FAVOURITE button to select stored favourite
PR
programmes.
VOL
()
VOL
OK
PR
()
FAVOURITE
13
Setting up
Calling
TV stations
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
Displaying programme table
Press the LIST button to display
the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
(
)
O}i{OOKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
a programme in the programme table
programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
()
Select
VOL
VOL
OK
PR
a
()
T
LIS
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
There
Press the LIST button to return to normal TV
14
viewing.
Picture
Note: Picture
PSM
menu
options
Status
(Picture
are
adjustment
not available for RGB
input source.
TurboOPic.
CSM
Contrast
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
1.
2.
3.
PSM
{
TurboOPic. {
CSM
Contrast
Brightness
C olour
Sharpness
(
)
Press the OK
4.
5.
Repeatedly
viewing.
PSM
Memory)
{
{
{
{
{
Brightness
Colour
Sharpness
(
)
{
{
{
{
{
{
{
O}i{OOKOMENU
Dynamic
Standard
Mild
Game
User
O}i{OOKOMENU
or F
button.
press the MENU button to return to normal TV
You
can also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for
good picture reproduction
CSM
You
or
2.
3.
4.
factory
and cannot be
changed.
MENU
(Colour Status Memory)
can
select the
bluish,
1.
at the
as
you
picture
prefer.
colour status;
standard, reddish, greenish
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select CSM.
Press the G button and then D / E button to select Standard,
Reddish, Greenish or Bluish on the CSM pull-down menu.
Repeatedly press the MENU button to return to normal TV
PR
VOL
()
VOL
OK
PR
()
viewing.
Picture
You
ness
1.
2.
adjustment
PSM
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
PSM
{
TurboOPic. {
CSM
Contrast
{
{
Brightness
{
C olour
{
{
Sharpness
(
)
3.
100
O}i{OOKOMENU
Press the G button and then F / G button to make
adjustments on the each sub menu.
Contrast
appropriate
80
(
}i{O) OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
set will automatically adjust the picture accordsurrounding conditions. This will enable you to enjoy the
suitable picture according to the surroundings.
some
ing
models, the
to the
most
Press the EYE/ * button to switch the eye function
on or
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
condition
EY E /
Note
PICTURE
TURBO/
in green does not appear continuappears each time the picture
yellow
:
If you press the PSM or TURBO PICTURE button with the eye
function, the eye function is automatically switched off.
b.
EYE function is not available for RGB
picture
selection
When this function is on, the
tinct than normal
Repeatedly
Note
a.
b.
input source.
(option)
picture
will be
more
brilliant and dis-
picture.
press the TURBO PICTURE button to switch
(Turbo Picture off)
on or
off.
(Turbo Picture on)
:
If you press the PSM button with the Turbo picture function, the
Turbo picture function is automatically switched off.
TURBO PICTURE function is not available for RGB
source.
16
in
a.
Turbo
PSM
display
display
changes.
but the
input
Sound
adjustment (option)
Sound adjustment is an optional function only
adjustment can perform this function.
SSM (Sound Status Memory)
You
can
Speech
1.
2.
3.
a
set with sound
SSM
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound Frequency Adjustment
a. Press the G button in User to display the User sub menu.
b. Select a sound band by pressing the F / G button.
(
)
SSM
{
Flat
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
{
{
{
{
{
{
{
Music
Movie
(
)
{
{
{
{
{
{
{
{
O}i{OOKOMENU
Speech
User
O}i{OOKOMENU
MENU
Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
c.
Equalizer
PR
VOL
()
VOL
OK
0.1O0.4O1.0O4.0O10OkHz
PR
()
()O}{O OKOMENU
(RF STEREO, Flat)
SSM/
Repeatedly
press the MENU button to return to normal TV
viewing.
You
can
also recall a desired sound (Flat, Music, Movie,
Speech or User) with SSM/ * button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
If you press the SSM/ * button after making appropriate
on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Note
:
adjustment
Flat, Music, Movie
Sound
1.
2.
or
Speech.
adjustment
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL (option), Balance, Treble, Bass or Woofer
(option).
3.
4.
5.
Press the G button.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
17
Sound
SSM
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
(
)
{
{
{
{
{
{
{
{
X-WAVE
You
1.
2.
3.
O}i{OOKOMENU
adjustment (option)
can
(Wireless Sound) (option)
also listen to the sound
SSM
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
(
)
4.
2.
3.
MENU
PR
VOL
{
are
displayed
{
{
{
{
{
{
{
{
Off
106.7
106.9
107.1
107.3
107.5
107.7
107.9
or
and the FM receiver's.
as
shown below.
X-WAVE
88MHz
107MHz
or
SetOFreq
{
FMO95.0MHz
Off
VOL
4.
()
Off
87.7
87.9
88.1
88.3
88.5
88.7
88.9
frequency
SSM
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
(
)
PR
{
{
{
{
{
{
{
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to select Set Freq.
()
OK
the FM receiver.
O}i{OOKOMENU
Match the TV's
Some models
1.
through
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to tune in a frequency on the X-WAVE pull-down menu.
}{i0-9OOKOMENU
O}i{O OKOMENU
Press the G button to tune in
a
frequency
on
the X-wave
menu.
5.
Usethenumber0to9orpresstheF/Gbuttontomatchthe
frequency and the FM receiver 's.
TV's
SOUND
TURBO/
Note:
a. If the reception is poor or weak, select a different frequency.
b. For best results, there should be no more that 5m (16.4ft)
between the TV and FM Receiver.
c.
In certain areas, the FM transmitter ability may be weak, such
as near a broadcast tower.
d. The reception sensitivity may depend on the kinds of receiver
(FM radio).
Turbo sound selection
(option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
TURBO
(Turbo
18
Sound
off)
(Turbo
Sound
on)
Sound
adjustment (option)
Sound output selection (option)
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II/ * button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
Stereo/Dual
reception (option)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
I / II
/
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II/ * button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the
I/II/ * button twice again.
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/ * but-
Language selection
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/ * button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
19
Time
Setting the
o
1.
o
o
2.
3.
OiO
Setting
clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
io oi
O
o
o
o
OiO
4.
5.
6.
O
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
By using
1.
MENU
2.
3.
PR
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
()
o
VOL
VOL
OK
o
io oi
o
PR
()
OiO
4.
5.
6.
7.
O
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
.
Auto off
If you select On on the Auto off pull-down menu, the set will autoswitch itself to standby mode approximately ten minutes
a TV station stops broadcasting.
matically
after
1.
2.
3.
4.
5.
20
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto off.
Press the G button and then D / E button to select On or Off on
the Auto off pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
Other functions
TV and AV modes
Inputs
be set for TV
can
cassette recorder
AV mode. AV mode is used when
or
(VCR),
or
other
equipment
a
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
o
video
o
is connected to the set.
OiO
O
button to select the
menu.
Press the G button and then D / E button to select
Press the G button and then D / E button to select
AV2), AV3 (option), S-VIDEO (option)
(option) on the Input pull-down menu.
or
or
Input.
TV, AV (AV1
COMPONENT
o
1
2
3
4
5
6
7
8
9
0
TV/AV
o
OiO
AV
or
AV1
:
MENU
O
VCR connected to the Euro scart socket
jack
of the set
AV2
:
VCR connected to the AV2 sockets of the set
AV3
:
VCR connected to the AV3 sockets of the set
or
phone
(option)
(option)
S-VIDEO : S-VIDEO socket of VCR connected to the Euro scart
socket on the set (option)
COMPONENT
sockets
4.
on
Repeatedly
Alternatively
:
DVD
the set
Player
(option)
can
select the TV
()
VOL
OK
connected to the COMPONENT
PR
press the MENU button to return to normal TV
you
PR
or
AV mode
by pressing
()
viewing.
the TV/AV
button.
In AV
mode,
to return to TV
mode, press the
D / E or NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automat-
ically
switched to AV
or
AV1 mode when
an
AV
signal
is
you want to keep on watching TV mode, press the D / E
buttons. Press the TV/AV button to return to AV modes.
input.
or
But if
NUMBER
21
Other functions
Child lock
o
The TV
o
can
be set
so
control it. This feature
that the remote control handset is needed to
can
be used to
prevent unauthorized view-
ing.
OiO
1.
O
Press the MENU button and then D / E
Special
button to select the
menu.
3.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
4.
Press the OK
5.
Repeatedly
viewing.
2.
or
F button.
press the MENU button to return to normal TV
With the lock on, the display Child lock on appears on the
if any button on the panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the panel is pressed while displaying the menus.
MENU
Blue back
PR
VOL
(option)
()
VOL
OK
PR
()
If you select On
on
ground
on
1.
appears
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
Special
button to select the
menu.
3.
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off
on the Blue back pull-down menu.
4.
Press the OK
5.
Repeatedly
viewing.
2.
or
F button.
press the MENU button to return to normal TV
Note : In the AV mode, Component mode, the blue
doesn't appear on the screen.
22
screen
background
Other functions
Games
Game is
an optional function, only a set with game
by using the remote control handset.
function
1.
(option)
Press the MENU button and then D / E
Special
2.
3.
4.
can
perform
o
this
o
button to select the
OiO
menu.
O
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select a game and then press the OK
button.
You
can
enjoy
the game
Note :
a.
Press the TV/AV
or
by using
the GAME owner's manual.
MENU button to return to the normal TV
viewing.
b.
If you want
a new
game, press the RED button to start
during
the game.
MENU
Sleep
TV/AV
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
PR
()
preset time elapses.
VOL
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
-
-
-
PR
()
of minutes selected.
Note :
a.
To view the
SLEEP
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the
until the
c.
sleep time, repeatedly
display
appears.
-
-
press the SLEEP button
-
When you switch the set
off, the
set releases the
preset sleep
time.
23
Connection of external
You
connect additional
can
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
Y
LL
PB
PR
DVD INPUT
(480i)
COMPONENT
OUT
AV
VIDEO
(L/MONO) AUDIO (R)
IN
Aerial socket
1.
VCR
2.
3.
4.
ANT IN
LL
Y
PB
5.
PR
DVD INPUT
COMPONENT
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
(480i)
OUT
AV
VIDEO
(L/MONO) AUDIO (R)
IN
Audio/Video in/out sockets
1.
VCR
2.
3.
R
AUDIO
L/MON
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV (or AV1), AV 2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
VIDEO
can
also record programmes received
out sockets.
Euro scart socket
1.
2.
VOL
the TV
on
video
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
OK
by
tape via audio/video
AV2
MENU
(option)
PR
/M NO
2
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV (or AV1) mode automatically. But if you want to keep on watching TV mode, press
the D / E or NUMBER buttons.
VCR
Otherwise press the TV/AV button on the remote control handset to select AV (or AV1). The VCR playback picture appears
on the screen.
You
can
also record programmes received
by
the TV
on
video
tape.
1
AV1
ANT IN
VCR
24
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
Connection of external
S-video / Audio in sockets
When
connecting
equipment
(S-AV) (option)
the S-video socket of the VCR to the S-VIDEO
socket of the set, the
picture quality
will be further
improved.
ANT IN
OUT
75Ω
VIDEO
(L) AUDIO -(R)
-
IN
1.
Connect the S-video socket of the VCR to the S-VIDEO socket
2.
of the set.
Connect the audio cable from the VCR to the AUDIO sockets of
VCR
the set.
3.
4.
Select AV3 by pressing the TV/AV button
Press the PLAY button on the VCR.
The VCR
playback picture
appears
on
the
repeatedly.
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the VCR simultaneously, only the S-VIDEO can be received.
ANT IN
75Ω
OUT
VIDEO
AUDIO
IN
Component
1.
or
Y B-Y
4.
R-Y)
of the DVD
VCR
output sockets (Y Cb Cr, Y
player
to the COMPONENT
INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the DVD
sockets of AV
3.
(option)
Connect the COMPONENT video
Pb Pr
2.
in sockets
to AUDIO IN
player
(or AV1).
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the DVD player.
The COMPONENT
Headphone
playback picture
socket
on
ANT IN
a
headphone
Y
LL
AV VIDEO
screen.
can
PR
(480i)
COMPONENT
perform
(L/MONO) AUDIO (R)
IN
DVD
socket
PB
DVD INPUT
OUT
the
(option)
models which have
Only
appears
Player
this
function.
Insert the
You
can
headphone plug
to the
listen to the sound
headphone volume,
headphone socket of the set.
through the headphones. To adjust
the
press the F / G button.
If you press the MUTE
switched off.
RAUDIO
L/MON
button, the sound from the headphone's is
VIDEO
AV2
OK
VOL
PR
L/MONO
2
25
MEMO
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising