LG DV8742P Owner's Manual

DV8742PCK_NA7NCL_ENG
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DV8742P
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
CAUTION
NOTES ON COPYRIGHTS:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
It is forbidden
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
a
risk of electric
shock to persons.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINIThe exclamation
point
within
an
equilateral triangle
is intended to alert the
important operating
user to the presence of
and maintenance (servicing)
instructions in the literature
accompanying
the
TION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CONNECTION TO
product.
THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
QUESTIONS REGARDING OUR TV SET COMPATIBILITY
TRIC
WITH THIS MODEL
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
WARNING: Do not install this
such
as a
book
case or
equipment
in
confined space
a
similar unit.
Digital
manual
Video Disc
proper
carefully
use
Player employs
of this
a
Laser
product, please
System.
read this owner's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
dures other than those
specified
authorized service location
the
performance of proceherein may result in haz-
ardous radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
2
DVD
PLAYER, PLEASE
placed
on
the
on
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
CAUTION:
ensure
625p
SERIAL NUMBER: The serial number is found
Model No.
To
AND
this unit. This number is
Serial No.
This
525p
CONTACT OUR CUSTOMER SERVICE CENTER.
RAIN OR MOISTURE.
apparatus.
___________________________________
___________________________________
to
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-14
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
12
Initial Settings General Operation.
Language..........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................12
Sound.............................13
Others.............................13
ParentalControl......................14
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
18-19
.
.
.
.
.
.
.
.
.
.
18
.18
Pause.............................19
MovingtoanotherTrack...............19
RepeatTrack/All/Off..................19
Search.............................19
Random...........................19
RepeatA-B.........................19
3DSurround........................19
.19
ChangingtheAudioChannel.
OperationwithJPEGDisc...................20
ViewingaJPEGdisc.....................20
MovingtoanotherFile.................20
.
.
.
.
.
.
.
.
.
.
StillPicture.........................20
Toflipthepicture.....................20
Torotatepicture......................20
.20
NotesonJPEGRecordings.
ProgrammedPlayback.....................21
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMADisc.........................21
ProgrammedPlaybackwithVideoCD.
RepeatProgrammedTracks
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.21
.21
.21
.21
AdditionalInformation.....................22
LastConditionMemory...................22
ScreenSaver...........................22
Operation
.15-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............15
.
.
.
.
.
.
.
VideoModeSetting......................22
22
Controlling other TVs with the remote control
SystemSelect..........................22
.
.
.
GeneralFeatures........................15
MovingtoanotherTITLE...............15
15
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................15
Still Picture and
Frame-by-Frame Playback
.
16
SlowMotion.........................16
Random...........................16
Reference
Troubleshooting..........................23
SpeakerSettings..........................24
LanguageCodeList.......................25
CountryCodeList.........................26
Specifications............................27
Repeat............................16
RepeatA-B.........................16
TimeSearch........................16
About the
3DSurround........................16
symbols
Zoom..............................17
Indicates hazards
MarkerSearch.......................17
itself
SpecialDVDFeatures....................17
TitleMenu..........................17
DiscMenu..........................17
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.17
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Subtitles...........................17
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
(DVD only)
DVD
The main film content
(8cm/12cmdisc)
or
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In
addition, this unit can play a DVD±R, DVD±RW, Kodak
CD, SVCD, and CD-R or CD-RW that contains
audio titles, MP3, WMA or JPEG files.
PICTURE
you to locate it
--
--
--
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself,
some CD-R/RW (or DVD±R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes
(Video
Sections of
Depending
on
on
enabling
On
or a
only)
piece
assigned
musical
on a
a
video CD
track
number,
you to locate the track you want.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
other functions may be added.
Refer also to the instructions supplied with the DVDs
with the
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
code of the DVD
player
and DVDs
player is designed and manufactured
5
playback of region "5" encoded DVD software. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "5" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
4
CD and audio CD
picture
Scene
Types
for
a
audio CD. Each track is
or an
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
This DVD
enabling
easily.
DVDs and Video CDs
Some
Regional
feature content
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
Notes
accompanying
or
additional feature content, or music album.
Each title is assigned a title reference number
There
of video CDs
are
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
same
Before Use
(Continued)
After
the unit
Handling
discs
Storing
Precautions
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
turn off the
or
volatile
liquids,
such
as
the unit. Do not leave rubber
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
insecticide spray,
or
To clean the cabinet
a
discs
the unit
Cleaning
use a
Cleaning
temperature
the exterior surfaces clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
strong
as
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Display
Window
POWER
Switches the
player
ON and OFF.
PLAY(N)
playback.
Starts
PAUSE(X)
Pauses playback. Press repeatedly
frame-by-frame playback.
STOP
x
(
for
) Stops playback.
Scan/Skip ( m / . )
previous chapter / track or to
Reverse
Go to
the
beginning.
Press and hold for two seconds for fast
Forward
Skip/Scan ( > / M )
chapter / track.
reverse
search.
Go to the next
OPEN/CLOSE(Z)
Press and hold for two seconds for
Opens
or
closes the disc
tray.
fast forward search.
Disc
Tray
Insert
a
disc here.
Display
window
Shows the current status of the
player.
Point the DVD
Display
Remote Sensor
remote control
here.
Player
Window
Indicates current
function
DVD
player
(Play, Pause)
DVD inserted
Indicates
CD Audio CD inserted
VCD Video CD inserted
SVCD
MP3 MP3
or
Indicates
Video CD inserted
Super
DTS and
CHP/TRK
Indicates
chapter
or
encoding
Dolby digital
of the current disc.
WMA disc inserted
current
repeat mode
Indicates total
time/elapsed
playing
time
track number
S VCD DVD
CHP
MP3
CD TRK
6
AD
B
ALL
Remote Control
OPEN / CLOSE
Opens
and closes the disc
Switches DVD
Player
TV POWER:
POWER
Turns the TV
ON and OFF.
0-9 number buttons
Selects numbered items in
a menu.
CLEAR
Removes
track number
on
the
program list or a mark
MARKER SEARCH
on
the
a
menu.
SCAN(m/M)
Search backward
TV Control Buttons
tray.
or
forward.
PAUSE/STEP(X)
playback temporarily/ press
repeatedly for frame-by-frame
playback.
Pauses
PLAY(N)
playback.
Starts
on or
off.
TV PR/CH +/--:
Selects TV's channel.
INTRODUC
TV VOL +/--:
Adjusts
TV's volume.
AV:
Selects the TV's
source.
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous chapter or track.
STOP(x)
Stops playback.
TITLE
Displays
title menu, if available.
DVD MENU
Accesses
menu on a
DVD disc.
RETURN
Removes the
bBvV(left/right/up/down)
Selects
-
an
item in the
?
plays
menu.
?
ENTER
Confirms
menu
?
selection.
?
display.
AUDIO
Selects
an
audio
language (DVD) or
(CD).
audio channel
an
SUBTITLE
Selects
a
subtitle
a
DVD
?
language.
ANGLE
Selects
?
camera
angle
?
MARKER
Marks any
back.
DISPLAY
Accesses On-Screen
setup menu, disthe video CD with PBC.
point during play-
SEARCH
Displays
MARKER SEARCH
menu.
?
PROGRAM
Places
a
track
on
the program
list.
?
ZOOM
Enlarges
if
?
available
video
image.
REPEAT
Repeat chapter, track, title,
SETUP
Accesses
or removes
setup
?
group all.
menu.
?
A-B
Repeat
?
Plays
?
sequence.
RANDOM
tracks in random order.
This button is not available.
7
Rear Panel
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
AUDIO OUT
Connect to
stereo
(Left / Right)
amplifier, receiver,
an
5.1 CHANNEL AUDIO OUT
or
Connect to
system.
--
--
--
VIDEO OUT
--
Connect to
a
TV with video
inputs.
center
a
TV with Y Pb Pr
5.1 channel receiver
connection
subwoofer connection
front
rear
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
Connect to
a
speaker
(Y
speakers connections
(surround) speakers connections
Pb
Pr)
inputs.
S-VIDEO OUT
Connect to
a
TV with S-Video
inputs.
OPTICAL DIGITAL OUT
Connect to
(Digital audio out jack)
digital (optical) audio equipment.
AC Power Cord
Plug
Do not touch the inner
rear
permanent damage
Remote Control
Operation
Point the remote control at the remote
sensor
and
press the buttons.
Remote Ccontrol
Battery
Detach the
installation
battery
cover on
the
rear
of
the remote control, and insert two
AAA AAA
batteries (size AAA)
aligned correctly.
Do not mix old and
mix different
with
new
and
batteries and
types of batteries such
standard, alkaline, etc.
8
pins of the jacks on the
discharge may cause
Electrostatic
panel.
never
as
into the power
to the unit.
source.
Connections
Tips
Depending
Progressive Scan (ColorStream Pro)
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
on
video resolution
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
best connections.
the
of your
reproduction, connect
jacks to the audio in jacks
player's
1
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to Optional Equipment" on page 10.
Caution
--
Make
directly to the
input channel.
Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
sure
the DVD
Player
is connected
--
Make
the
one
of the
capabilities
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
Y
2
corresponding
Pb Pr cable (C).
in
jacks on the DVD Player
jacks on the TV using the
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
Notes
--
--
to a TV
Set the
Progressive to "On" on the setup
progressive signal, see page 12.
Set the Progressive to "Off" by removing
following connections, depending
existing equipment.
--
of your
menu
for
any disc
from the unit and close the disc
tray. See that "no
disc" is
window. Then press
displayed
on
the
display
STOP and hold it for five seconds before
on
to
the DVD
TV
system.
Connecting
"digital ready"
possible.
the
TV. Tune the TV to the correct video
--
or
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
System
For better sound
high-definition
television, you may take advantage of the DVD
Player's progressive scan output for the highest
described below.
AUDIO OUT
a
connection
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
or
relesasing it.
analog video
S-VIDEO
connection.
Video connection
1
2
Connect the VIDEO OUT
the video in
jack
jack on the DVD Player to
using the video cable (V).
the TV
on
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the audio cables.
the DVD
TV
the
S-Video connection
1
Connect the S-VIDEO OUT
to the S-Video in
cable
2
jack
the TV
on
the DVD
using
Player
the S-Video
(S).
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the audio cables.
Component
Video
(Color Stream )
the
connection
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
the
Pr
2
on
the DVD
TV
1
jack
corresponding
cable (C).
in
jacks on the DVD Player to
jacks on the TV using an Y Pb
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the audio cables.
the DVD
TV
the
Note
If the TV has
an
S-video
input, connect the DVD player
using an S-video cable,
video
cable.
yellow
with the S-video cable. When
do not connect the
9
PREATION
Connections
Connecting
(Continued)
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
DVD
Player to the
amplifier, receiver,
cables (A).
Right AUDIO OUT jacks on the
right in jacks on your
stereo system, using the audio
audio left and
or
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--To
see
the audio format of the current DVD in the
screen
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1
If the audio format of the
Connect
one of the DVD Player's DIGITAL AUDIO
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
Analog
display,
on-
press AUDIO.
connection to
a
multi-channel A/V receiver
with 6 Channel connectors
(Dolby Digital, DTS)
This DVD
Player contains a multi-channel decoder. This
playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
enables
OUT
1
Connect the CENTER and WOOFER
Center
and the Subwoofer
speaker
sponding in jacks
on
jacks for the
(C) to the corre-
your receiver.
You will need to activate the
2 (See "Digital
Digital
A
Audio
player's digital output.
Output" on page 13).
digital
quality.
provides
the best
sound
For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
3 (R)
to the
Make the
4 Output
Right FRONT speaker jacks
corresponding in jacks on your receiver.
Right REAR speaker jacks
corresponding in jacks on your receiver.
appropriate Sound settings for Analog
Speaker Settings in the setup menu.
and
See page 13.
Caution:
Rear of
Due to the DTS
will be in DTS
to the
Connect the Left and
Multi-channel sound
multi-channel connection
Connect the Left and
2 (F)
Licensing agreement, the digital output
digital out when DTS audio stream is
DVD
F
player
selected.
Rear of DVD
player
C
Front R
Front L
Center
Rear R
Rear L
Subwoofer
ANA
R
O
X
OPTICAL
A
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
10
R
L
AUDIO INPUT
OG 5.1CH
AUDIO INPUT
Amplifier
(Receiver)
Before
General
Operation
Temporary
Explanation
This manual
gives basic instructions for operating the
Player. Some DVDs require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indithat
the
cating
operation is not permitted by the DVD
Player or is not available on the disc.
TITLE
DVD
On-Screen
General
screen.
playback
1
ALL
AB
OFF
Display
status
Some items
On-screen
CHAPT
TRACK
can
be
Title
Repeat Chapter
Repeat
Track
Repeat
All Tracks
Repeat
A-B
Repeat
Off
be
Action
display operation
Press DISPLAY
Repeat
Resume
displayed on the TV
changed on the menu.
can
Feedback Field Icons
play
(non-PBC
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
Notes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
during playback.
on-screen
Press 3/4 to select
an
2
The selected item will be
3
The number buttons
Press 1/2 to
numbers
change
(e.g.,
title
item.
highlighted.
the
can
setting
of
an
item.
be also be used for
number).
press ENTER to execute the
For
some
setting
functions,
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Shows the current title number and total number of
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
1 ENG
language
Digital Audio
Output mode
and
Subtitle
language
Angle
5.1 CH
ABC
OFF
1/1
Sound
VCD2.0
D
NORM.
to the desired title number.
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the
point by
the
elapsed
time
directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
the
setting.
Shows the current subtitles language, and
changes
the
setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes
the
1/2,or
Numbers, ENTER
1/2,or
Numbers, ENTER
Numbers, ENTER
1/2,or
AUDIO
1/2,or
SUBTITLE
1/2,or
ANGLE
1/2
setting.
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
0:20:09
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only)
Shows the audio channel, and
Audio Channel
Sound
titles, and skips
Selection Method
the audio channel.
STER.
changes
NORM.
Shows the current sound mode, and
changes
the
Selection Method
1/2,or
Numbers, ENTER
--
1/2,or
AUDIO
1/2
setting.
11
PREATION
Before
Initial
You
Operation (Continued)
set your
can
Picture
Settings
Personal Preferences
own
on
the
player.
TV
Aspect
nected.
Initial
General
Settings
Operation
The
setup
Scan
Original
Disc Subtitle
Chinese
Disc Menu
English
Rating
Code
Country
Aspect
5.1
is
played
off).
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Spanish
Disc Menu
16:9 Wide
TV
Menu
Language
Digital
The
Others
will show the current
well
as
as
setting for the
setting(s).
While the desired item is
selected, press 2, then
Press ENTER to confirm
selection.
additional
Press
or
PLAY to exit the
menu.
Language
Disc
Language
DVD
for the disc's
language
a
Progressive Scan
Menu, Audio, and
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 25. If you enter the wrong language
:
The
Disc Audio
Off
Disc Subtitle
On
Disc Menu
Rating
Country
TV
Language
Progressive
Digital
Disc Audio
Original
5.1
Disc Subtitle
Chinese
Others
Disc Menu
English
Spanish
Aspect
Korean
Scan
Audio
Caution
Italian
Language
Digital
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
Polish
Output
an
Other------------
Speaker Setup
Others
Menu
Select
you
to On in error, you must reset the unit.
Language
a
see
1)
for the
language
menu.
Disc Audio
Chinese
Disc Subtitle
This is the
English
Remove any disc from the unit and close the disc
on the display
tray. See that "no disc" is displayed
menu
window.
2)
Press STOP and hold it for five seconds before
releasing
Disc Menu
standard
Rating
visible
Country
Code
Aspect
Menu
Language
Progressive
Di
12
setup
when you press SETUP.
TV
it
Output
Speaker Setup
German
Code
Progressive
5.1
Scan
Audio
French
Rating
Country
Menu
Code
Aspect
Menu
code, press CLEAR.
TV
DVD
Progressive
provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Subtitle.
Original
Output
Speaker Setup
Scan Video
3/4 to select the desired
Some items
Scan
Audio
alternate
3
setting.
your
4
require
steps.
SETUP, RETURN,
5 setup
Select
Code
Aspect
Progressive
item,
sides of the
Rating
Country
5.1
screen
con-
bars
16:9 wide TV is connected.
Disc Audio
Other------------
Speaker Setup
a
French
Polish
Output
style (Both
German
Press 3/4 to select the desired item.
selected
masking
conventional TV set is
back in that
16:9 Wide: Select when
Others
2
a
with
cut
Korean
Scan
Audio
style
picture are
Italian
Language
Progressive
Digital
standard 4:3 TV is
images
picture.
above and below the
appears.
Disc Audio
Menu
a
theatrical
connected. The video material formatted in the Pan &
menu
TV
Displays
4:3 Panscan: Select when
Press SETUP.
1
DVD
4:3 Letterbox: Select when
l
A
di
Scan
O
t
t
it. The video
on a
and
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
setting
a
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
The
of audio
variety
output options.
player's Digital Audio Output according to the
Set the
a
type of audio system you
be
DRC, Vocal, PBC and Auto Play settings
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
use.
between On and Off.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equip-
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
ment with
Disc Menu
PBC
Rating
Auto
a
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
the DVD
other
DIGITAL OUT
Player's
equipment with
decoder
or
a
DTS
an
amplifier
Country
or
TV
decoder, Dolby Digital
amplifier.
The DVD
2-channel
player outputs
digital
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
Code
Menu
Digital
5.1
and the
96KHz
at
Scan
Progressive
Audio
Dynamic Range Control (DRC)
thanks to
possible,
48 KHz
Language
Others
audio
digital
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
Sample Freq.
Aspect
Output
Speaker Setup
format, you can hear a program's soundtrack in the most accurate and realistic presentation
/PCM
Rating
Country
5.1
Scan
Audio
With the DVD
Disc Audio
TV
Language
Digital
sounds in the
Off
Code
Progressive
a
On
Play
Aspect
Menu
MPEG decoder.
PCM: Select when connected to
stereo
jack
to
can
changed.
Output
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Speaker Setup
Others
Vocal
Sample Frequency
To
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
5.1
change
the
Speaker settings
DVD
Set Vocal to On
only
DVD is
The karaoke channels
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 24.)
a
multi-channel karaoke
on
the disc will
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
Play
can
ically
If Auto
Play
search
a
play
DVD
set up the DVD
starts
playing
On: Auto
Player
Play
Play
so a
DVD disc automat-
whenever the DVD is inserted.
mode is set to
title that
back the title
Off: Auto
Disc Audio
when
mix into normal stereo sound.
You
Select
playing.
On, this DVD player will
playback time
automatically.
is
long
most and then
function is activated.
function is not activated.
Disc Subtitle
R
Disc Menu
Country
TV
Code
Aspect
Menu
Language
Progressive
Digital
5.1
R
Note
Front L
Rating
Scan
Audio
Output
Volume
0dB
Size
Large
Distance
0.3
The Auto
Play
function may not work for
some
DVDs.
m
Test
Return
Speaker Setup
Others
13
PREATION
Before
Operation (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
scenes
not suitable for
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
applies
to the
disc
complete
the disc. These
scenes on
or
scenes are
Code
(See "Country
to
TV
6
Country
TV
Code
Menu
Progressive
Digital
5.1
1
3
1
Scan
Audio
Speaker Setup
Select
Change
Others
Code
Country
the setup
using
Country
2
step
3
Select
4
Shift
5
6 selection,
1
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
3 of
the
"Rating"
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
"Rating"
tons to create
is selected, press 2.
personal 4-digit security password.
then press ENTER. Enter the 4-digit password
again and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password,
then press ENTER.
Select
a
rating from 1
(1) has the
tons. One
Unlock: If you select
unless
an
Changing
is necessary when
the 4-digit code"
1
Follow
Enter the old
3
Select
Steps
4-digit
1-2
code
shown above to the left
as
Change using
3/4 buttons then press
ENTER.
Enter the
ENTER.
Enter
time and veri-
menu.
in full.
scenes
scene
(Rating).
code, then press ENTER.
Press SETUP to exit the
play
will not be
is available
same
Press ENTER to confirm your
14
the
2
on
rating
played
If you
If you
forget
your
password,
code
to clear the current pass-
the disc.
1
Press SETUP to
or a
2
Use the Number buttons to enter the
display
the
setup
menu.
6-digit
number
"210499".
The
4-digit password is
display for a moment.
3
rating selection,
to exit the menu.
forget your 4-digit
word, follow the procedure below.
no
5 then press SETUP
4-digit password
changed (see "Changing
below.).
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
If
the code is
6
Unlock, Parental Control is
The alternative must have the
lower
Note
Confirmation of the
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
rated
alternative
button and select the
3/4 buttons.
5
1 to 8: Some discs contain scenes not
played. Higher
the 3/4 buttons.
4
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
using
to 8
not active. The disc will
Ratings
using the 3/4 butplayback restrictions.
playback restrictions.
left.
least
has the most
Eight (8)
using 2
using
on
Press ENTER to confirm your country code
then press SETUP to exit the menu.
a
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4
cursor
second character
2
on
Code is selected, press 2.
the first character
Select
the 3/4 buttons
menu.
Follow
Unlock
Output
Output
Speaker Setup
While
2
Language
Scan
Audio
Others
4
Aspect
Language
Digital
5
Rating
US
Code
Progressive
8
7
Code Set
Aspect
Menu
5.1
Disc Menu
List", page 26.).
Rating
Country
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Subtitle
were
to the list
Disc Menu
are
The Parental Control feature allows
Disc Audio
disc, referring
Disc Subtitle
rated
whose standards
country/area
Disc Audio
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
country-dependent.
a
used to rate the DVD video
Enter
a new
code
as
cleared. "P CLr" appears
shown above to the left
on
the
(Rating).
Operation
Playing
with DVD and Video CD
Playback Setup
Turn
on
the
1
VCD2.0
DVD
the TV and select the video
nected to the DVD
Audio
source
Note
VCD1.1
input
source con-
on
the audio
system and select
connected to the DVD
Moving
When
Load
chosen disc in the tray, with the
If
disc has
playback
press PLAY.
In some cases, the disc
Press
playback
does not start,
might
Moving
The
is
When
or
displayed
may be displayed first after
Video CD which offer a menu.
loading
a
DVD
Use the 1 234 buttons to select the
want to
view, then press ENTER
Press TITLE
or
title, you
can move
to
to select
a
num-
title number.
to another CHAPTER/TRACK
a
title
1 /12
title/chapter you
playback.
to start
DVD MENU to return to the
on a
more
chapter/track
menu screen
DVD
(0-9)
VCD1.1
disc has
a menu screen
one
1/3
appear
instead.
If
than
more
1/3
DVD
DISPLAY, then press the appropriate
DVD
menu
use
follows:
as
bered button
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
automatically.
a
to another TITLE
another title
side down.
starts
otherwise, all operations described
player.
Press OPEN/CLOSE to open the disc tray.
your
2 playback
3
Unless stated
the remote control. Some features may also be
available on the Setup menu.
player.
system: Turn
input
General Features
DVD and Video CD
a
menu
disc has
than
as
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
Press SKIP . or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
and the exact
menu screen.
operating procedures
for
two-digit numbers, press
(0-9)in rapid succession.
may differ depending on the disc.
Follow the instructions on the each menu screen.
Search
You also may set PBC to Off under
13.
1 Press SCAN m
using
the
Note
For
menu
setup. See page
The
player
DVD
will
now
VCD2.0
or
M
the numbered buttons
VCD1.1
briefly during playback.
go into SEARCH mode.
2 Press SCAN m
Notes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental
--
Control",
DVDs may have a
player will not
Your
different from your
player is 5 (five).
(see
page 14).
region code.
on
play discs that have a region code
player. The region code for this
or M repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To exit SEARCH
mode, press PLAY.
15
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
VCD1.1
will
2 You
can
during playback.
repeatedly
by
pressthe remote control.
on
VCD2.0
DVD
1 Press PAUSE/STEP
The recorder will
now
Video
T 1/4
or
mode.
in
reverse
is not
possible
VCD2.0
during playback
The "RANDOM" appears
2 To return to normal
To
screen.
a
third time.
screen.
must set PBC to Off
Repeat
DVD
the
on
function. See page 13.
VCD2.0
VCD1.1
OFF
repeat
sequence in
a
title:
a
1 Press A-B at your chosen
"
*
A
briefly
appears
on
starting point.
the TV
screen.
at your chosen end
again
point.
briefly on the TV screen, and the repeat
begins ("AsB" appears the display window).
with
Time Search
in
or
the TV
on
stop mode.
1 Press DISPLAY
screen.
press RANDOM
the TV screen.
on
SKIP >
again.
play
during Random playback, the
(track) and resumes Random
3 Within 10
works with DVD Karaoke discs and
video CD without PBC.
to
use
the Random function. See
VCD2.0
TITLE
TRACK
VCD1.1
ALL
4 Within 10
DVD Video Discs
Repeat Chapter/Title/Off
icon appears
on
the TV
invalid
This unit
repeat the title currently playing, press REPEAT
Repeat mode,
Repeat
on
on
to select the Time
display.
the number buttons to enter
right
hours, minutes, and
the TV
the TV
a
starts from the selected time
to confirm the start
on
the disc. If you enter
time, playback will continue from the
DVD
VCD2.0
current
point.
VCD1.1
3D SUR
can
produce
third time.
screen.
a
3D Surround
effect, which
playback
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
screen.
a
sec-
in the box.
seconds, press ENTER
1 Press DISPLAY
press REPEAT
Off icon appears
use
start time. Enter
simulates multi-channel audio
screen.
second time.
Title icon appears
on-screen
seconds,
3D Surround
REPEAT.
Repeat
time of the
OFF
repeat the currently playing chapter, press
Repeat Chapter
elapsed playing
time.
NORM.
-
dis-
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
an
DVD
on-screen
at
screen.
seconds, press 3/4
required
Playback
page 13.
CHAPT
the
onds from left to
menu
The
during playback.
playing
The "-:--:--" appears in the Time Search box.
OnaVideoCDwithPBC,youmustsetPBCtoOffon
Repeat
on
The Time Search box shows the
the
setup
appears
Search icon in the
playback.
only
-:--:--
current disc.
unit selects another title
Note
This function
0:20:09
DVD
The Time Search function allows you to start
any chosen time on the disc.
VCD1.1
2 Within 10
Tips
By pressing
2 Use 3
or
The sound
a
home theater
4 to select the sound
option
system.
during playback.
will be
option.
highlighted.
3Use1or2totoselect"3DSUR".
To turn off the 3D Surround
16
the TV
on
PBC, you
the
AB
sequence
playback,
The "NORMAL" appears
The
the TV
on
"A B" appears
Karaoke DVD
1 Press RANDOM
The
use
A-B
2 Press A-B
mode, press PLAY (N).
playback
Random
3 To exit
a
to select the
M)
Video CDs.
2 To
Off icon appears
to
menu
A*
Note
The
screen.
3 To cancel the sequence, press A-B.
Slow motion
1 To
All icon appears
Video CD with
a
Repeat
PAUSE mode.
(forward).
4. To exit Slow Motion
the
the TV
Repeat mode, press REPEAT
Repeat
setup
CD, the Slow speed changes: T 1/8,
T 1/2
or
Repeat
The
"
a
on
repeat the disc currently playing, press REPEAT
3 To exit
On
required
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
With
press REPEAT.
currently playing,
Track icon appears
go into PAUSE mode.
(m or M) during
player will enter SLOW
(m
VCD1.1
(X) during playback.
2 Press SCAN
3 Use the SCAN
Repeat
Note
Slow Motion
The DVD
2 To
Track/All/Off
Repeat
the track
repeat
The
The
now
PAUSE/STEP
ing
-
second time.
go into PAUSE mode.
advance the picture frame-by-frame
player
1 To
Frame-by-Frame playback
1 Press PAUSE/STEP
The
Video CDs
(continued)
effect, select "NORM".
or
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
during playback
or
still
playback
the
repeatedly,
discs: Menus
to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press DVD MENU.
level
magnification
steps.
2 Use the 1 234 buttons to
move
the zoomed
through
picture.
3 Press CLEAR to
the
normal
resume
playback
or
the contents of DVD Video
Checking
activate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
Then, press the appropriate number button to select
option. Or, use the 1 234 buttons to highlight your
selection, then press ENTER.
Title Menu
1 Press TITLE.
screen.
Note
zoom
function may not work for
some
2 The
DVDs.
VCD2.0
DVD
menu, the
list
menu can
remove
menu
menu
will appear
the
on
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
3 To
Marker Search
an
DVD
If the current title has
The
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
DVD
1 Press DVD MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
be memorized.
can
2 To
is
menu
remove
displayed.
the disc menu, press DVD MENU
again.
mark, follow these steps.
a
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Repeat step
on
the TV
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
a
Angle
If the disc contains
memorize.
The Marker icon will appear
2
The disc
to
DVD
scenes
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
angle
appears
on
the
a
display.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
2 Within 10
seconds, press 1/2 to select
number that you want to recall.
a
the
screen.
Marker
3 Press ENTER.
will start from the Marked
Playback
4 To
remove
scene.
the MARKER SEARCH menu, press
SEARCH.
To clear
1
a
During
playback,
The MARKER SEARCH
2
3
Press AUDIO
repeatedly during playback
language or audio track.
to hear
different audio
Changing
the Audio Channel
VCD2.0
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
Subtitles
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the Marker number that you want
to
the Audio
Language
5.1 CH
a
VCD1.1
a
dif-
ferent audio channel
Marked Scene
disc
D
DVD
Changing
DVD
ABC
1 ENG
Press SUBTITLE
different subtitle
repeatedly during playback
languages.
to
see
the
erase.
Press CLEAR.
Note
The Marker number will be erased from the list.
4
Repeat steps
5
To
2 and 3 to
erase
If
appears, the feature is not available
on
the disc.
additional Marker
numbers.
remove
the MARKER SEARCH menu, press
SEARCH.
17
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Playing an Audio CD and
MP3
CD
The DVD
ings
Player
can
play
or
read the notes
files that have
on
The
on
the TV
on
screen.
player
About
the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
screen
Go to
step
2
1.
2.
3.
Folder2
Folder3
Folder4
Folder5
Folder6
Microsoft audio
Media
Clear All
5.
4
Press 3/4 to select
ENTER.
A
to
Playback starts.
During playback,
Creator", which
single
creates
session disc
6.
cannot
playback
File
elapsed playing
move
Press DVD MENU to
menu.
no
MP3/WMA
ISO9660 file
an
requires
system.
MP3/WMA files in the
MP3/WMA file in the 1st
playback
MP3/WMA files. If you wish
files, format all the data in
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's
is
or use a new one.
names
and must
time will appear on the display window and
Playback will stop at the end of the disc.
Press TITLE to
or
player
-
track, it
track then press PLAY
with this
compatibility
follows:
-
the disc
a
offers double the audio
the MP3 format.
first track. If there is
3
Audio)
compression
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "EasyCD
Folder7
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
file
a
-
Folder1
OFF
as
22.05
4.
Program
00:00
a
MP3/WMA Disc
Press 3/4 to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
MP3 file that has
an
".mp3".
WMA(Window Media Audio)
limited
Folder8
not read
technology.
WMA(Windows
compression of
JPEG
MP3 WMA
can
An WMA file is
MP3 WMA
2
Recordings
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
extension other than
Insert a disc and close the tray.
Audio CD; Audio CD menu appears
appears
MP3/WMA
MPEG1 audio
CD-RW discs.
playing MP3/WMA recordings,
MP3/WMA Recordings on right.
menu
on
An MP3 file is audio data
MP3/WMA formatted record-
Before
1
Notes
About MP3
WMA
CD-ROM, CD-R
on
MP3/WMA Disc
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
to the
previous
page.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK 5.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
NORM.
Audio CD
menu
0: 56: 18
Clear All
TRACK 8.mp3
00:00
1
If you
are
use
MP3/WMA
in
return to the
5
To
18
a
menu
file list and want to return to the Folder
the 3/4 to
and
highlight
previous menu screen.
stop playback
at any other
optimal
automatically
many different types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
OFF
Tip
list,
are
are
of recordable disc formats
TRACK 4.mp3
TRACK05
Pre-recorded DVDs
set to these standards. There
TRACK 3.mp3
TRACK04
playback quality.
press ENTER to
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
always
be
sought
from the
copyright
owner.
right
Operation
Pause
with Audio and MP3/WMA Disc
MP3
CD
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
to another Track
MP3
CD
WMA
Press SKIP . twice
briefly
to
step back
to the pre-
In
case
of audio
CD,
directly to any track, enter
the numbered buttons (0-9)
to go
using
during playback.
CD
sequence.
icon and "A
Repeat
press A-B at your chosen start*
"
appears
Repeat Track/All/Off
1 To
MP3
WMA
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
the
on
begins
to
play repeatedly.
3 To exit the sequence and return to normal
A-B again.
The
Repeat
icon and "OFF" appears
3D Surround
This unit
can
on
the
play,
press
menu screen.
CD
produce
a
3D Surround
effect, which
playback
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
1 Press DISPLAY
menu
menu screen.
icon and "A B" appears
simulates multi-channel audio
CD
the
on
at your chosen end point.
on the menu screen,
again
Repeat
and the sequence
to the
vious track.
the track number
a
2 Press A-B
The
Press SKIP . or > briefly during
playback to go to the next track or to return
beginning of the current track.
A-B
During disc playback,
ing point.
The
Moving
(Continued)
a
home theater
or
system.
during playback.
screen.
2 To
repeat all tracks
on a
disc, press REPEAT
2 Use 1
a sec-
ond time.
The
Repeat
icon and "ALL" appears
on
the
or
The sound
2 to select the sound
option
will be
3Use3or4totoselect"3DSUR".
menu screen.
To turn off the 3D Surround
3 To cancel
The
Repeat mode,
Repeat
on
the
MP3
CD
1 Press SCAN m
player
will
now
M
or
effect, select "NORM".
third time.
a
menu screen.
Changing
Press AUDIO
Search
The
press REPEAT
icon and "OFF" appears
option.
highlighted.
WMA
the Audio Channel
CD
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
different audio channel
briefly during playback.
go into SEARCH mode.
2 Press SCAN m
or M repeatedly to select the
required speed: mX2, mX4, mX8 (backward)
MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
on
the
or
menu
screen.
3 To exit SEARCH
Random
mode, press PLAY.
MP3
CD
1 Press RANDOM
WMA
during playback
or
when
playback
is
stopped.
The unit
automatically begins
"RAND." appears
on
the
Random
Playback
and
menu screen.
2 To return to normal
edly
until "RAND."
playback, press RANDOM repeatdisappears on the menu screen.
19
OPERATION
Operation
Viewing
a
with JPEG Disc
JPEG disc
Moving
JPEG
This DVD
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
Insert
1
a
menu
or
>
appears
during viewing a picture
previous file.
to the
or
Still Picture
1 Press PAUSE/STEP
on
once
to advance to the next file
disc and close the tray.
The MP3/WMA-JPEG choice
TV
to another File
Press SKIP .
the
screen.
The
will
during
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
player
now
MP3 WMA
To
JPEG
2
menu
appears
on
the TV
picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
the
flip
To rotate
screen.
Press 1/2
JPEG
Folder2
flip
the
picture
during showing
clockwise
picture
Folder1
to
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Depending
Off
Speed
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
Press 3/4 to select
and ENTER.
3 A list of files in the folderfolder,
appears.
Press RETURN to
choice
a
move
to the MP3/WMA-JPEG
menu.
If you
"
are
in
a
file list and want to return to the Folder
the 3/4 buttons
on
the remote to
---
reduce the resolution of the JPEG files
pixels
and burn another disc.
on
If you want to view a particular file, press 3/4 to
highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
that all the selected files have the
During viewing a file, press RETURN
previous menu (JPEG menu).
rename
Press TITLE to
to
move
to
to the next page.
Press DVD MENU to move to the previous page.
JPEG
move
Folder1
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768
Slide
Speed
5/32
Off
1024X768
Picture5.jpg
Tip
There
are
three
viewing
Slide
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
Speed
then press 3/4 to
use, and press ENTER.
To
stop viewing
The JPEG
20
menu
the disc should
be less than 650.
When you are using software such as
Creator" to burn the jpeg files into the
menu screen.
the
5
big
Some disc may be incompatible due to different
recording format or condition of disc.
highlight
and press ENTER to return to the
previous
4
too
Total number of files and folders
use
"
are
to less than 2 mega
Tip
list,
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
screen
at any other
appears.
time, press STOP.
when
copying
into the CD
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
If the files have
File
them
names
be read
shown
by
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
".jpg" extension will not be able to
player. Even though the files are
image files in windows explorer.
this DVD
JPEG
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
mode to enter the
on
during playback or in
Program Edit mode.
the stop
E
The
with Video CD
Note
On
a
setup
Video CD with
menu
to
PBC, you
the
use
must set PBC to Off
on
the
function. See page 13.
Program
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA Disc
The
MP3
VCD1.1
mark will appear to the right of the word
the right side of the menu screen.
Program
OPERATION
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
menu
is
playback
stopped.
will appear.
Program
VCD
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
Edit
TRACK 4
mode;
TRACK 5
TRACK 6
E
the
mark will
Select
2
disappear.
TRACK 7
track, then press ENTER
a
selected track
the
on
Clear All
TRACK 8
Program
to
place
the
list.
Note
2 to
Repeat step
Program list.
3
place
TRACK 1
TRACK 12
the
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 7
TRACK 7.mp3
Clear All
TRACK 8
0: 56: 18
STER.
Audio CD
00:00
Clear All
3
MP3/WMA
menu
track you selected last is
highlighted
on
from
5 playing.
move
Press DVD MENU to
to the
previous
repeat all tracks
REPEAT
Press PLAY to start.
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
all of the tracks
To resume normal
select
a
on
the
Program
playback
track of CD
programmed
(or MP3/WMA) list
disappears
on
the
menu screen.
the TV
screen.
Tracks
Erasing
a
on
the program
icon and "ALL" appears
Repeat mode,
on
the
menu
list, press
Track from
the
on
menu screen.
press REPEAT
icon and "OFF" appears
Repeat
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
MP3/WMA disc
Program
from
and then press ENTER.
"PROG." indicator
list
on
second time.
a
Repeat
The
page.
6 Playback begins
Playback stops after
have played once.
normal
icon and "TRACK" appears
Repeat
To cancel
to the next page.
move
resume
screen.
The
Press TITLE to
left.
repeat the track currently playing, press REPEAT.
The
To
Press 3/4 to select the track you want to start
playback,
To
Repeat Programmed
menu
the program list.
7
on
To
programmed
steps 2-6 of "Programmed Playback with
Audio CD and MP3/WMA disc"
The "NORMAL" appears
OFF
Press 2.
The
menu.
playback
4 programmed playback,
press PROGRAM.
TRACK 3.mp3
TRACK 8.mp3
NORM.
Program
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
Follow
PROGRAM to exit the
or
TRACK 2.mp3
TRACK 4.mp3
TRACK 6
Press RETURN
3
E
TRACK 8.mp3
TRACK 5
4
on
Program
MP3 WMA
E
Program
CD
additional tracks
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
the
1 Follow
steps
List"
as
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
The
Program
complete Program
The programs
are
All", then press ENTER.
for the disc will be erased.
also cleared when the disc is removed.
21
Additional Information
Last Condition
DVD
This
CD
player
Controlling
Memory
memorizes the
settings
user
for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
If you load
player.
a
disc that has its
settings
Notes
--
You
control the sound
can
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
You
control the sound
can
Screen Saver
in
Player
appears when you leave the
mode for about five minutes.
picture
screen saver
stop
After the Screen Saver has been
minutes,
the DVD
Player
will
engaged
automatically
level, input
source, and
code.
While
holding down TV POWER button, press the
number buttons to select the manufacturer code for
1
your TV
DVD
source, and
remote
supplied
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
it.
The
level, input
power switch of your LG TV with the
control.
memo-
rized, the latest stop position is automatically recalled.
--
other TVs with the
remote control
VCD1.1
the table
(see
below).
Release TV POWER button.
2
Code numbers of controllable TVs
for about five
If
turn itself off.
them
more
than
one
at
one
a
code number is
listed, try entering
time until you find the
one
that works with
your TV.
Video Mode
VCD2.0
DVD
With certain
ering
or
Setting
VCD1.1
discs, the playback picture may be flick-
Dot Crawl is shown
Vertical
on
lines. That
straight
De-interlace is not
interpolation
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
means
or
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
video mode.
To
change
the video
mode, press and hold DISPLAY
during
disc
The
video
playback.
displayed on the TV screen.
Check whether the video quality has improved. If not,
repeat the above procedure until picture quality is
improved.
new
→
change
MODE2
→
→
the
TV,
some or
even
after
all buttons may not
the correct
entering
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
MODE1
(MODE1).
your TV,
If you enter a new code number, the code number
entered will be erased.
setting.
Set the
appropriate
code number
again.
If you turn off the power, the video mode will be back
to initial state
on
on
previously
sequence:
MODE3
Depending
function
manufacturer code.
mode number selected is
MODE1
2
Note
about 3 seconds
Video mode
(Default),
System
Select
You must select the
Detailed
MODE1: The
or
video
Descriptions
source
material)
MODE3: Suitable
atively
material of the DVD video
(film
material
film based content
video based
playing
by the progressive scan method.
for playing video based content with
or
appropriate system mode for your
If
NO
DISC
system.
appears in the display window,
press and hold PAUSE on the front panel for more than
TV
5 seconds to be able to select
is determined from disc information.
MODE2: Suitable for
material recorded
for Video Modes
or
?
compar-
little motion.
When the selected
system does not coincide with the
system of your TV, normal color picture may not be
displayed.
Select when DVD
Multi
Note
setting only
works when the
Scan mode is set to "On" in the
Setup
Progressive
NTSC:
player
is connected with
player
is connected with
player
is connected with
system TV.
Select when DVD
NTSC-TV.
menu.
PAL:
Select when DVD
PAL-TV.
22
system (PAL, NTSC,
AUTO).
AUTO:
The video mode
a
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
service.
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
the power cord into the wall outlet
Plug
securely.
Insert
disc.
a
(Check
that the DVD or,
audio CD indicator in the
window is
not work.
No
contacting
The TV is not set to receive DVD
picture.
signal
output.
Select the
on
the TV
player
The video cable is not connected
display
lit.)
appropriate video input mode
the picture from the DVD
so
the TV
on
appears
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The Progressive Scan is set to "On" on
the setup menu but is connected to a
standard(analog) television.
Set
The
Select the correct
equipment
connected with the
audio cable is not set to receive DVD
signal output.
The audio cables
are
not connected
the TV.
on
Progressive
(see page 12).
audio receiver
Scan to "Off"
input
mode of the
you can listen to the
sound from the DVD player.
so
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The
Digital Audio Output
position.
is set to the
playback picture
is
The disc is
the
on
equipment
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The
Turn
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
Insert
disc.
a
(Check
that the
DVD,
audio CD indicator in the DVD
or
display
is
lit.)
An
unplayable
disc is inserted.
Insert
playable
a
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
down.
placed upside
Place the disc with the
playback
side
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
The remote control is not
does not work
remote
properly.
sensor
Cancel the
pointed
player.
at the
of the DVD
player.
There is
an
obstacle in the
rating
tray correctly
path of the
player.
Rating
function
or
change
level.
Point the remote control at the remote
sensor
The remote control is too far from the
DVD
the disc
Clean the disc.
the
The remote control
on
guide.
of the DVD
Operate
(7 m).
player.
the remote control within 23 ft
Remove the obstacle.
remote control and the DVD
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
23
REF NC
Speaker Settings
Make the
following settings
for the built-in 5.1 channel
surround decoder.
If you connected speakers to your DVD Player, setting
the Distance lets the speakers know how far the sound
Disc Audio
has to travel to reach your set listening point. This
allows the sound from each speaker to reach the listen-
Disc Subtitle
R
Disc Menu
Country
Code
Digital
Audio
0 dB
Size
Scan
er
Large
Distance
Language
Progressive
5.1
Volume
Aspect
Menu
R
Front L
Rating
TV
Distance
0.3
at the
Test
Return
Output
Press ENTER to test the
Adjust
Select "5.1
tons
on
Speaker Setup" using
the setup
the 3/4 but-
Front Left
menu.
While "5.1
Speaker Setup"
Press 1/2 buttons to select the desired
speaker.
341 2 buttons.
selection
speaker that you want to adjust. (Front speak(Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer)
a
ers
Volume
Press 1 / 2 to adjust the output
speaker. (-10dB 0dB)
level of the selected
-
Size
Press 1 / 2 to set
a
mode.
If you have connected the
a low frequency of 100Hz
Small
(Large,
or
None)
system
speaker with
below, select "Large."
to
a
or
If you have connected the system to a speaker witha low frequency of 100Hz or below, select
out
"Small." If you have not connected a subwoofer,
always select "Large" for Front speaker (L/R).
When you do not have
select "None."
Front L/R
speaker's
a
size
certain
can
speaker connected,
be set to
"Large"
or
"Small."
If Front L/R
size is set to
Center
can
speaker's
speaker's size
"Small," Rear and
be set to "Small"
or
"None."
Subwoofer's size
"None".
24
speaker.
signals
Rear
system.
Center
Front Right (R)
(L)
Rear Left (L)
Right (R)
→
→
→
Return
3
4 Adjust options by using
Select
of each
is selected, press 2
button.
Speaker
signals
the volume to match the volume of test
memorized in the
→
2
time.
Speaker Setup
Others
1
same
m
Test
can
be set
only
to
"Large"
or
Press ENTER to return to the
previous
menu.
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
25
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
14).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
26
Republic
Islands
(French)
State
(British)
(USA)
Specifications
General
Power
Power
requirements
AC 110-240V
consumption
12W
Dimensions
Mass
(approx.)
,
50/60 Hz
430x39x242mm(WxHxD)withoutfoot
2.2
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
REF NC
System
Laser
Semiconductor
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
laser, wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1 V
(p-p),
75 Ω, sync
1.0 V
75 Ω,
negative,
RCA
jack
x
1
S-VIDEO OUT
(Y)
(p-p),
(C)0.3V(p-p)75Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
negative
sync, Mini DIN
4-pin
x
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
3 V
Audio
output (analog audio)
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
75 Ω,
Optical
connector
x
1
1
Audio
(p-p),
x
1
Accessory
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Battery..........................2
Design
and
specifications
are
Manufactured under license from
subject
Dolby
to
change
Laboratories.
without notice.
"Dolby",
"Pro
Logic",
and the double-D
symbol
are
trademarks of
Dolby
Laboratories.
DTS and DTS
Digital
Surround
are
registered
trademarks of
Digital
Theater
Systems,
Inc.
27
P/NO
:
3834RD0041T
">