LG LH-TK551TB Owner's Manual
PDF
Document
Advertisement
Advertisement
LH-TK551TB_NA3ILLA_English DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-TK551TB (Main Unit: LH-TK551 Speakers: LHS-55TBS, LHS-55TBC, LHS-55TBW) R Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely. this P/N: 3834RH0115E Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE About the REFER SERVICING TO QUALIFIED SERVICE symbols PERSONNEL. for instructions Indicates hazards This flash with arrowhead lightning equilateral triangle symbol is intended to alert the within an to constitute magnitude a or other harm to the unit user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient itself likely to cause material damage. risk of electric Indicates special operating Indicates tips and hints for features of this unit. making the task easier. shock to persons. The exclamation mark within is intended to alert the important operating an equilateral triangle about the presence of and maintenance (servicing) user instructions in the instructions accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in confined space a Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. OTES ON COPYRIGHTS: It is forbidden similar unit. via cable, CAUTION: This DVD/CD receiver To ensure proper use employs of this a laser system. product, please read this owner 's manual unit tion carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radi- law to copy, broadcast, show, broadcast in public, or rent copyrighted material without by play permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. ation exposure. the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such Model No. To as prevent direct exposure vases, should be 2 placed to laser on the beam, do apparatus. not try to open Serial No. ___________________________________ ___________________________________ Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............21 Playing an Audio CD and MP3/WMA Disc . . . . . 21 BeforeUse..............................4-5 Pause.............................21 PlayableDiscs...........................4 Precautions.............................5 MovingtoanotherTrack...............21 RepeatTrack/All/Off...................21 NotesonDiscs..........................5 Search.............................21 AboutSymbols..........................5 FrontPanelandRearPanel..................6 JPEGDiscOperation......................22 ViewingaJPEGdisc.....................22 RemoteControlOverview....................7 SlideShow.........................22 StillPicture.........................22 Preparation Connections............................8-11 TVConnections.........................8 OptionalEquipmentConnections . . . . . . . . . . . .9 Movingtoanotherfile.................22 Torotatepicture......................22 ProgrammedPlayback.....................23 RepeatProgrammedTracks................23 .23 ErasingaTrackfromProgrammeList 23 Erasing the Complete Programme List DivXDiscOperation.......................24 SpeakerSetup............................25 . AerialConnections........................9 10 Assembling and Connecting to the Speakers .10 ToHangtheCentreSpeakeronawall. SpeakerSystemConnection...............10 SpeakerPositioning......................11 BeforeOperation.......................12-17 Mini Glossary for Audio Stream & Surround . . . . . . . . . Mode.................................12 SoundMode...........................12 On-ScreenDisplay.......................13 InitialSettings........................14-17 GeneralOperation....................14 Language..........................14 Display..........................14-15 Audio..............................15 Lock(ParentalControl)................16 Others.............................17 Operation DVDorVideoCDOperation...............17-20 PlayingaDVDandVideoCD...............17 GeneralFeatures.....................18-20 MovingtoanotherTITLE...............18 18 Moving to another CHAPTER/TRACK . . . . . SlowMotion.........................18 Still Picture and . . . . . . . . . . . . . AdditionalInformation.....................26 LastConditionMemory...................26 ScreenSaver...........................26 SystemSelect..........................26 ControllingtheTV.......................26 OperationwithRadio......................27 Presettingtheradiostations................27 Listeningtotheradio.....................27 OtherFunctions...........................28 SleepTimerSetting......................28 Dimmer...............................28 Mute.................................28 UsingtheHeadphoneJack................28 SelectingtheInputSource.................28 XTS(ExcellentTrueSound)................28 XTSpro...............................28 KARAOKEOperation....................29-32 KaraokeBasicPlayback...................29 .29-30 KaraokeAdvancedPlayback. KaraokeMENUPlayback...............30-32 . . . . . . . . . . . SETUP............................30 MUSICLIST........................31 18 RANDOM..........................32 Search.............................18 CHALLENGE........................32 Frame-by-Frame Playback . Repeat............................18 RepeatA-B.........................19 TimeSearch........................19 MarkerSearch.......................19 Zoom..............................19 SpecialDVDFeatures....................20 Reference LanguageCodeList.......................33 CountryCodeList.........................33 Troubleshooting........................34-35 Specifications............................36 TitleMenu..........................20 DiscMenu..........................20 ChangingtheAudioLanguage. ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . .20 .20 Subtitles...........................20 3 Introducin Before Use Playable Discs ote When (8cm/12cmdisc) Video CD (VCD) (8cm/12cmdisc) SVCD and CD-R or MP3, WMA, JPEG DVD-RW, DVD+RW, CD-RW that contains audio titles, or play DTS-encoded gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit. (8cm/12cmdisc) can playing volume Audio CD addition, this unit DTS-encoded CDs CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the DVD In on a DivX files. Disc-related terms Title (DVD only) The main film content Depending on the conditions of the the CD-R/RW ment or itself, some cannot be CD-R/RW played on labeled side recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit. Do not attach any seal or label to either side (the side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. otes on or the recorded feature content additional feature content, or music album. Each title is assigned a title reference number of DVDs and Video CDs playback operations may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available other functions may be added. Make sure to also refer to the instructions or supplied played on the unit. Regional enabling easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. On (VCD) Video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. with the DVDs and Video CDs. Some DVDs made for busi- purposes may not be able to be you to locate it Scene DVDs and Video CDs Some of Video CDs Types There are two types of Video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact Video CDs code of the DVD/CD receiver and DVDs This DVD/CD Receiver is designed and manufactured for playback of region "3" encoded DVD software. The region code on the labels of some DVDs indicates which type of player can play those discs. This unit can only play DVDs labeled "3" or "ALL". If you 3 try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. 4 accompanying or otes ness or PBC with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To keep Do not radio, or or turn off the use volatile such liquids, contact with the unit for leave marks Cleaning a use a store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable increase inside the car. light, Cleaning discs Fingerprints or and dust the disc on reduce sound with temperature as a clean quality. cloth. Wipe Before distort the can picture clean the disc playing, the disc from the centre out- wards. on insecticide spray, as plastic products in long period of time. They will a or the surface. the unit Do not To clean the cabinet Use playing, the exterior surfaces clean the unit. Do not leave rubber near discs Storing Precautions soft, dry cloth. If the surfaces soft cloth benzene, or moistened with lightly solution. Do not use thinner, are a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static use spray intended for About vinyl records. Symbols of the unit. About the To obtain clear a picture The DVD/CD Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. "" may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available About the disc on Discs DVD VCD2.0 Disc Handling get on playback by the edges VCD1.1 side of the disc. so that fingerprints symbols DVD-Video disc. for instructions following symbol is represented by the symbol. one to the disc specific of the DVD and finalized DVD±R/RW. Video CDs with the PBC (playback control) or tape on the disc. Video CDs without the PBC (playback control) function. will not CD the surface. Do not stick paper that function. Do not touch the Hold the disc on A section whose title has applicable only Notes symbol display Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. DivX DivX disc. 5 Introducin Front Panel and Rear Panel Connect a MIC 2 to both sockets. or PHONES connector STANDBY/ON MIC 1/MIC 2 to MIC 1 microphone or STANDBY indicator DISC Lights red when the receiver is in Standby mode (off). Tray FUNCTION/PLAY Press and hold down this button about 3 seconds, then press repeatedly to select other function. VOLUME controller DISPLAY Window OPEN/CLOSE button Remote sensor USB host Connect to a (USB of MONO/STEREO/ multimedia PAUSE/STEP USB port memory etc.) TUNING(-/+)/SKIP(-/+) buttons STOP Power Cord SPEAKER connectors FM Antenna connector AV2 AUDIO Connectors L AUDIO R 8 8 AM 8 Loop 8 AV2 IN 8 AV1 IN Antenna connectors S-VIDEO OUT connector MONITOR OUT connector COMPONENT VIDEO OUT terminals Connect to AV1 AUDIO Do not touch the inner panel. Electrostatic damage to the unit. 6 a TV with Y Pb Pr Input (L/R)/VIDEO pins of the jacks on the rear discharge may cause permanent inputs. IN Connectors Input (L/R)/VIDEO IN Remote Control Overview POWER OPEN/CLOSE Opens DVD/KARAOKE Select the output source (CD/DVD) Selects or tuner System's (FM tray. input source. TV BAND Select the and closes the disc AUX KARAOKE. accesses or removes (Z) To control the TV. (LG TV only) and AM Introducin bands) 0-9 numerical buttons Select directly service, programme number a select numbered or SUBTITLE options in Selects a To XTS pro enjoy Removes the sound. To sound effect. enjoy great an language (DVD) or audio channel (CD). sing or removes setup menu Selects the TV's . b/B/v/V Selects TEMPO(-/+) To fast play or slow. (LG forward. playback. Displays the disc's Title VOLUME To backward*/go to beginning of current chapter or track or go to previous chapter or track. radio station's track. into track number on the program menu or a mark MARKER SEARCH on the Marks speakers. point during playback. MARKER SEARCH menu. SLEEP MIC VOL.(V/v) Adjusts microphone all. volume. Set the ly at a System to turn specified time. sequence. ECHO VOL.(V/v) Adjusts echo volume. change brightness sor About 30° in each direction in front of the remote sensor of the display window on the front panel ing in power-on status. Remote control Operation Range off automatical- DIMMER Press to Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sen- Angle: a Displays REPEAT A-B Remote Control playback. SEARCH REPEAT Repeats (B) MARKER menu. Repeat chapter, track, title, PLAY Mute the CLEAR a playback (X) MUTE the tuner. Removes Pause Starts menu. frequency image. (x) PAUSE/STEP MEMO. a (+/-) Stops playback. PROG. Enter Radio. menu, if available. the DVD video STOP SKIP(>) Program or adjust speaker volume and TV volume. Enlarges to next or removes selection. ZOOM Search Accesses menu TITLE SKIP(.) forward*/go chapter or the To tune in the desired radio station. Adjust a vocal range. (LG karaoke disc only) Search menu. TUN(-/+) (b/B): b-KEYCON. -# FORWARD in the option Select programme of TV SLOW-/+(t/T) REVERSE an PR/CH(+/-) (v/V): SCAN(bb/BB) Reverse/ Forward slow (left/right/up/down) Acknowledges only) or source. ENTER karaoke disc Search backward display. INPUT DVD disc. menu on a song of WOMEN's. a Accesses On-Screen MENU Accesses the sing DISPLAY SETUP Accesses the multimedia files. enjoy To song of MAN's. a menu. FEMALE MALE To setup Selects the sound mode. audio an subtitle. song's SOUND MODE AUDIO Selects the USB XTS To highlight RETURN natural and realistic more language (DVD). SHADOW menu. To subtitle a Remove the remote battery battery AAA) batteries correctly. with installation cover on control, and insert the rear two R03 and dur- of the (size aligned Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Connections TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Progressive Scan (ColorStream connection If your television is ips Depending high-definition or "digital ready" television, you may take advantage of the DVD/CD Receiver's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/CD Receiver. your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connection on methods described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. pro) a Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the Caution Make TV sure the DVD/CD Receiver is connected to the TV. Select the correct AV directly your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy input using an corresponding in jacks Pb Pr cable (C). Y optional on the on protection system. Rear of TV VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT S-Video connection Y Pb Pr L Connect the S-VIDEO OUT Receiver to the S-VIDEO S-Video cable jack on the DVD/CD IN jack on the TV using the (S). Video connection Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable jack jack on using V S the C supplied (V). Component Video (Color Stream ) connection Connect the COMPONENT VIDEO OUT DVD/CD Receiver to TV using an Y Pb Pr jacks from the the corresponding in jacks on the cable (C). L AUDIO R AV2 IN AV1 IN Rear of DVD/CD Receiver otes Set the Progressive to "On" on the Setup progressive signal, see page 15. Set the for any disc from the unit and close the disc tray. see that "no disc" is displayed on the display window. Then, press progressive to "Off" menu by removing STOP and hold it for five seconds before Progressive scan video connections does not work with the (yellow S-VIDEO connection. 8 VIDEO OUT releasing analog jack) or it. Connections (Continued) Optional Equipment Connections 1 2 3 Connect a VCR to the AV1 IN connectors. Connect a additional VCR to the AV2 IN connectors. Connect the USB port of a USB Memory (or MP3 player, etc.) to the USB HOST on the front of the unit. Prepa tion VCR OUT IN Additional VCR Front of DVD/CD Receiver IN OUT To AUDIO OUT VIDEO (L/R)/ VIDEO OUT AUDIO (L) AUDIO (R) To AUDIO OUT (L/R)/ VIDEO OUT USB Memory, MP3 Player (or Memory Card Reader, etc.) To AUDIO IN VIDEO IN To AUDIO IN VIDEO IN (L/R)/ (AV1) (L/R)/ (AV2) L AUDIO R 88 AV2 IN 888 AV1 IN otes If the audio format of the produce a digital output strong, distorted sound does not match the or no capabilities of your DVD/CD Receiver, the receiver will sound at all. The DivX files in your memory card will not be able to be play. Aerial Connections Connect the Connect supplied FM/AM aerial for listening to the radio. the AM Loop aerial to the AM aerial connector. Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial aerial Loop (supplied) (supplied) L AUDIO R 88 AV2 IN 888 AV1 IN otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure After fully extend the FM wire aerial. connecting the FM Wire aerial, keep to it as horizontal as possible. 9 Connections and Assembling the (Continued) Connecting to Connect the Speakers The front and speaker rear stands are detached from the stands. Connect the as speakers using the supplied speaker cords. speakers assemble the front and Speaker System Connection rear speaker speakers cords and from To obtain the best possible surround sound, adjust speaker parameters (volume, distance, etc.). speaker illustrated. Front speaker (Left) Front Connect the speaker terminals the bottom of each front and speaker (Right) appropriate terminals on the bottom of each front and rear speaker. After connecting the speaker cords to the appropriate on cords to the speaker and attach the the speaker stands. front and rear the rear speakers to Rear speaker (Right surround) Rear speaker (Left surround) Center 8 8 speaker 8 8 8 Subwoofer ote You cannot detach the bling To the front and hang speaker from rear speakers. the centre the stand after speaker assem- on a wall You 1 2 can hang the Centre Speaker Detach the stand bottom of the by rotating the Centre Speaker. Attach the stand rear of the by rotating Centre Speaker. wall. on a the screw on screw on the the otes Be sure terminal are 3 Hang it via hole on the Speaker on the screw. rear side of the Centre on the cable to the speaker components: + to + and -- appropriate to --. If the cables reversed, the sound will be distorted and will lack base. If you use adjust the speakers. Do not 10 to match the front speakers with volume carefully to remove the front cover low maximum input rating, avoid excessive of output supplied speaker. on the Connections (Continued) Speaker Positioning In the of normal case position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subto play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should If you want connect a subwoofer. woofer). ? ? Front speakers According to your listening position speakers to 45 degree. for speakers equal distance. And by hearing position set up the interval between Centre The ? set up the speaker centre speakers and front speakers are ideally the same height. But normally place it above or below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of speakers a smaller above 60 room - 90 size, if the audience is cm than the listener's near to the rear wall set the rear speakers opposite each other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Speaker (Left) Rear Speaker (Right) Speaker Positioning Example 11 Prepa tion Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You DVD VCD2.0 VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high audio from DTS program sources such as DVD and compact discs, etc.bearing the trade- quality digital discs, mark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. When DVD is inserted You change can the Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. After you select 2 channel a) 3 ENG AUDIO ) by pressing button repeatedly. D 2CH Bypass Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program source. If you play DVDs with mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Digital (For example 2 ENG D 2CH or button, press SOUND Music Movie Matrix The " " After you select 5.1 channel b) (For example 1 ENG D 5.1 CH or 4 ENG DTS ) by pressing 5.1 CH " -" - AUDIO indicator will be "BYPASS" indicator button, press SOUND button. displayed on the TV screen. will be only displayed on the display window. (II) Dolby Pro Logic II creates five full-bandwidth channels from two-channel an sources. output This is done using advanced, high-purity matrix surround decoder that extracts the without spatial properties of the original recording adding any new sounds or tonal colorations. MOVIE mode: Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the following order. BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → → → → use quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use → → with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that the → → → The Movie mode is for approaches When Video CD is inserted with any stereo music ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed the TV on screen. recordings. When CD is inserted MATRIX mode: Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the The Matrix mode is the except same as the Music mode that the directional enhancement is logic mono signals turned off. It may be used to enhance by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo simply to force the audio to mono. reception may be following order. BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → → → → → → → → → For your reference ? You identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. can - - BYPASS - Software with multichannel surround audio played according to the way it was signals recorded. is otes When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). When you you can't enjoy 5.1 channel 2 channel sound will out by the influence of the use a output. Only microphone, microphone system. 12 Before Operation (Continued) On-Screen You Display general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: display can the Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B, Numbers ENTER Press DISPLAY during playback. 1 2Pressv/Vtoselectanitem. highlighted. Chapter Number 1/12 0:20:09 Numbers, ENTER Audio 3 Press b / B to change the the number buttons if use inputting the title setting. You can appropriate (e.g. number). For press ENTER to execute the some also A-B Repeat title Repeat sequence Resume Action play setting. language Angle prohibited or AUDIO point ABC 1 ENG SUBTITLE otes If no Selection Method Track Number button is screen all of the features pressed for 10 seconds, display disappears. b/B Example: On-Screen Display during playing VCD not available provide b/B Bypass Items Some discs may not shown below. b/Bor 1/3 Sound from this b/Bor functions, PLAYBACK STATUS/RESTRICTIONS Title language and Digital Audio Output mode Subtitle Prepa tion B, Numbers ENTER Time search The selected item is b / the on- (or PBC 1/3 Numbers 0:20:09 ENTER b/Bor Audio Channel Sound B, Numbers ENTER mode) Time search b / AUDIO Bypass b/B 13 Before Initial Operation (Continued) LANGUAGE Settings the menu, you can make various adjustments to items such as picture and sound. You can also By using Setup LANGUAGE language for the subtitles and the Setup menu, among other things. For details on each Setup menu set a item, To see display the menu. SET UP will take you back to initial To go to the next level: v / Select menu V to screen v 4 5 v audio), appears. select the desired as option / V disc the second level. well as alternate move setting for setting(s). the option to the third level. setting for the Setup menu and on-screen display. DVD you prefer for the audio track subtitles, and the disc menu. language was Refers to the original language (disc in which the recorded. Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language code, press CLEAR on the then press ENTER to confirm your selection. Some items require additional steps. or Select remote control. to select the desired Press SET UP language Original: then / V to select the second desired then press B to Use Original Disc Audio / Subtitle / Menu will be shown the current item, a Select the B to move to selected 3 Disc Menu OSD Operation setup 2 press Use Off Move Press SET UP. The Disc Subtitle screen. the remote control. on General Use Original A second press of To go back to the previous level: Press b on the remote control. The Disc Audio and exit the Menu: Press SET UP to 1 English pages 14 to 17. display Press B OSD PLAY to exit the DISPLAY setup DISPLAY menu. TV 16:9 Aspect Display Mode Progressive Widescreen Off Scan Move TV Aspect DVD 4:3: Select when a 16:9: Select when Mode Display Display Mode Select standard 4:3 TV is connected. a 16:9 wide TV is connected. DVD setting works only when the TV Aspect mode is set to "4:3". upper and Displays a wide picture with lower portions of the screen. Panscan: Automatically displays the wide picture and cuts off the portions that do not fit. Letterbox: the entire 14 screen bands on the on Before Operation (Continued) Progressive Scan AUDIO Progressive Scan Video provides pictures with less flickering. the highest quality Each DVD disc has set Progressive Select 1 menu scan set signal, the type of audio system you Scan to Off. Progressive "Progressive Scan" of audio on output options. options according to use. Prepa tion AUDIO If you are using the Component Video jacks for connection to a TV or monitor that is compatible with progressive variety Set the DVD/CD Receiver's AUDIO If you are using the COMPONENT VIDEO OUT jacks, but are connecting the receiver to a standard (analog) television, a 5.1 a Scan to On. Select Speaker Setup DRC On Vocal On the DISPLAY then press B. DISPLAY Move TV Off Aspect Display Select On Mode Progressive 5.1 Scan Speaker Setup DVD Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setting" page 25) Move Select "On" 2 Press 3 using the v Select Dynamic Range Control (DRC) / V buttons. DVD ENTER to confirm your selection. The confirm menu will appear. 4 When the confirm 5 Pressing ENTER will set the to Progressive scan mode. menu appears on your screen Cancel is highlighted as default. Use the b / B buttons to highlight Enter. DVD/CD Receiver DivX With the DVD program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing dialog intelligibility. format, you can hear a Set DRC to On for this effect. otes The DRC function works Caution Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan depending of recorded discs. Dolby Digital The level of only during playback Dynamic Range Compression on may differ the DVD disc. to On in error, you must reset the unit. DVD Vocal 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window 2) Press and hold STOP release it. The video standard visible on a for five seconds then output will be restored only DVD is The karaoke channels mix into playing. a when a multi-channel Karaoke on the disc will normal stereo sound. to the picture will once again be conventional analog TV or monitor. setting, and (x) Set Vocal to On a 15 Before LOCK Operation (Continued) Password (Parental Control) You LOCK Unlock Rating **** Password 2 Follow control information certain scenes on to that may not be suitable of these discs contain parental scenes Many that applies to the complete the disc. Movies and disc scenes are or rated control feature allows you to block access below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable. Select 1 "Rating" on the LOCK 3 then press ENTER. 4 Press SET UP to exit the 2 step 2 as then, press menu Password and Code features, you must input the security code you created. If you have not prompted to do yet entered a security Country 4-digit code you are so. Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3Selectaratingfrom1to8usingthev/V buttons. Rating 1-8: Rating and rating eight (8) one or (1) menu. forget your Security has the most restrictions is the least restrictive. Code If you forget your security code you the following steps: 1 Input the 6-digit number security code is and the 2 Enter a new code as can "210499" on clear it the using setup menu cleared. described above. ote When " " appears on the TV screen, and then press SET UP to move to the INPUT PASSWD press STOP (x) menu. Country DVD Code Enter the code of the Rating, then press B. highlighted. Enter the new 4-digit code, Input it again to verify. setup B. To access the menu (Rating). "Change" to parental scenes the LOCK shown left from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The on Select DVD for children to view. change password. Select Password If you Some movies contain or "New" is Move Rating enter 1 Code Country can (Security Code) were country/area used to rate the DVD-Video in the reference 1 Select 2 Follow whose standards disc, based on the list chapter. "Country Code" on the LOCK menu, then press B. step 2 as shown left Select the first character 3 Shift 4 using v / V buttons. using B button and select character using v / V buttons. the second (Rating). cursor the Unlock If you select and the disc unlock, parental control is plays not active 5 in full. ote If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are is available on not played unless an alternate scene the disc. The alternative must have the rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. same Press ENTER to confirm your 4 then press SET 16 UP to exit the rating selection, menu. Press ENTER to confirm your country code selection. Before DVD Operation (Continued) OTHERS Video CD or Playing a Operation DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Turn on VCD2.0 DVD the TV and select the video VCD1.1 input source con- nected to the DVD/CD Receiver. Audio system: Turn and select the on input the audio source Operation system connected to the DVD/CD Receiver. Select Move PBC Set 1 VCD Playback Control to On (PBC) On:Video CDs with PBC or Off. to the When played are the same way You can 3 DivX show the DivX DRM Management) Registration Your Please the registration use this code to DivX(R) : using the To learn only. more READING appears automatically. (Z) is inserted, make sure down. facing to close the tray. the TV screen, and playback If playback does not start, on menu might appear XXXXXXXX If Video On Demand service. DivX(R) tray. instead. register this player with This will allow you to rent and play press PLAY. In some cases, the disc (Digital Right code is double-sided DVD is Press OPEN/CLOSE starts code for your unit a the side you want to as Audio CDs. DivX(R) Registration to open the disc 2 facing up. PBC. Off:Video CDs with PBC (Z) Load your chosen disc in the tray, with the label played according are Press OPEN/CLOSE The purchase videos is displayed may be displayed first after Video CD which contains a menu. menu screen DVD Video On Demand format. a menu screen or loading a go to www.divx.com/vod DVD The Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental Use the b/B/v/V buttons to select the an encrypt movie file. otes you want to view, then press ENTER to start. Press TITLE or DVD MENU to return to the menu screen. VCD2.0 If you rent the DivX VOD file, it has several viewing limits as show below. options of Use the number buttons to select the track you want to view. Press RETURN to return to the ? Display the number which you can watch the file. Menu ? This rental video has 7 views left. A view ends when you stop video, or turn off Do you want to playback, play your player. use one a different of your 7 views Yes now No setting the and the exact operating procedures for depending on the disc. menu screen. You also may set PBC to Off under setup. menu otes If Parental Control is set and the disc is not within the Rating settings (not authorized), The rental has been expired. ? Display the authorization This video player expired. error. the 4-digit code must be entered and/or the disc must be authorized "Parental This rental is menu screen. may differ Follow the instructions on the each using ? title/chapter Control", (see page 16). region code. on DVDs may have a Your receiver will not play discs that have code different from your receiver. The this player is 3 (three). region region code a for is not authorized to play this video. 17 DVD Video CD or Operation (Continued) Still Picture and General Features VCD2.0 DVD ote Unless stated otherwise, all operations described use Moving When a disc has another title as than more one can move to follows: DISP., then press the appropriate numbered button (0-9) to select a title number. When to another CHAPTER/TRACK VCD2.0 a title disc has VCD1.1 on a PAUSE/STEP Search 1 more than chapter/track as Press . or one VCD2.0 DVD Press m or M than track, you one chapter can move or M With to another > a Video press DISP. DVD-Video discs (0-9). 3 1 To exit SEARCH To ote two-digit numbers, press (0-9) in rapid succession. Slow Motion Press SLOW -/+ 1 the numbered buttons during To 3 VCD1.1 - DivX VCD1.1 Repeat Chapter/Title/Off Repeat Chapter icon appears on the TV screen. repeat the title currently playing, press second time. a Repeat To exit Title icon appears on Repeat mode, press the TV screen. REPEAT third a time. The pause. VCD2.0 repeat the currently playing chapter, press REPEAT The VCD2.0 DVD 2 DVD mode, press PLAY. REPEAT. The For to select the repeatedly CD, the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). follows: the numbered buttons go into SEARCH mode. now mX8, mX16, MX2, MX4, MX8, Repeat using during playback. (backward) or MX16, MX100 (forward). or a Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track VCD1.1 The DVD/CD Receiver will briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, number picture frame-by-frame by pressrepeatedly on the remote control. mX100 more go into PAUSE 2 required speed: mX2, mX4, DivX disc has now advance the can Press m DVD during playback. The DVD/CD Receiver will 2 ing Press Moving DivX Press PAUSE/STEP You DVD title, you VCD1.1 mode. the remote control. Some features may also be available on the Setup menu. to another TITLE 1 Frame-by-frame playback Repeat Off icon appears on the TV screen. The receiver will enter SLOW mode. Use the SLOW -/+ to select the 2 1/16, t 1/8, t 1/4 1/16, T 1/8, T 1/4 To exit slow motion 3 or t 1/2 or T 1/2 mode, required speed: t (backward), or T (forward). Video CDs 1 Video CD. To playback in reverse is not applicable for 3 Track/All/Off repeat the track currently playing, press Repeat Track icon appears the TV on screen. repeat the disc currently playing, press REPEAT The ote Repeat REPEAT. The press PLAY. 2 Slow motion To - second time. a Repeat All To exit icon appears on the TV Repeat mode, press screen. REPEAT a third time. The Repeat Off icon appears on the TV screen. ote On a the setup 17. 18 Video CD with menu to PBC, you use the must set PBC to Off Repeat on function. See page DVD Video CD or General Features Repeat To repeat A-B DVD (continued) VCD2.0 a briefly Press A-B on again A-B appears sequence You VCD1.1 can briefly begins. the TV starting point. 1 screen. at your chosen end on start points To enter title: Press A-B at your chosen A- appears Marker Search nine sequence in a Operation (Continued) the TV screen, and the a playback VCD2.0 2 VCD1.1 Press DISP. during playback. play appears on the at The on-screen dis- elapsed playing time of Within 10 seconds, press 3/4 to select the Time Search icon in the on-screen display. The "-:--:--" appears in the Time Search box. Within 10 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. If you enter the wrong numbers, press CLEAR to the numbers you entered. Then enter the correct remove num- bers. points disc. Marked Scene a disc 1 2 3 Playback 4 playback, press The MARKER SEARCH SEARCH. will appear menu on the a screen. marker number that you want to recall. To will start from the Marked remove scene. the MARKER SEARCH menu, press SEARCH. To clear During a Marked Scene disc playback, press 1 2 3 Repeat steps 4 5 The MARKER SEARCH SEARCH. will appear menu on the screen. Press 1/2 to select the marker number that you want to erase. Press CLEAR. Within 10 seconds, press ENTER to confirm the start time. starts from the selected time Playback point. briefly. Press ENTER. the current disc. enter screen 1 to enter up to nine Marker Repeat step on a the TV on Within 10 seconds, press 1/2 to select screen. The Time Search box shows the to During disc playback, press MARKER when playback reaches the spot that you want to During playing point. Up mark, follow these steps. The marker icon will appear repeat The Time Search function allows you to start any chosen time on the disc. memorized a be memorized. can To Recall DVD from VCD1.1 memorize. point. To cancel the sequence, press A-B. Time Search VCD2.0 DVD an invalid time, playback the disc. If you will continue from the current on The marker number will be erased from the list. 2 and 3 to erase additional marker numbers. To remove the MARKER SEARCH menu, press SEARCH. Zoom DVD VCD2.0 DivX VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback still playback activate the Zoom function. If you press ZOOM increases up to four 100% size → 1600% size 2 or Use the 1 2 zoomed repeatedly, magnification level steps. 400% size → the → 800% → 100% size 3 4 buttons to move through the picture. ote The zoom function may not work for some DVDs. 19 to Operation DVD Video CD or Special Operation (Continued) DVD Features DVD the Audio Changing Language DVD DivX the contents of DVD Video discs: Menus different DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Changing Then, press the appropriate number button Press AUDIO Checking option. Alternatively, use light your selection, then to select the 1/2/3/4 buttons to an high- press ENTER. different repeatedly during playback audio language or audio track. the Audio Channel to hear VCD2.0 a VCD1.1 repeatedly during playback to hear a audio channel (STER., LEFT or RIGHT). ote DVD Title Menu If appears, the feature is not available on the disc. Press TITLE. 1 If the current title has the 2 Press AUDIO a menu, the Otherwise, the disc The menu can list camera screen. guage and subtitle title. Disc Menu DVD 20 menu menu will appear on Subtitles DVD DivX may appear. lan- angles, spoken options, and chapters for the Press S-TITLE different repeatedly during playback subtitle languages. to see the otes The subtitle file of the DivX file is displayed only smi, srt and sub. Press MENU. The disc menu is displayed. If there is no information not read in the DivX or there is file, "1/1" etc a are code that displayed. can Audio CD Playing Disc an MP3/WMA Disc or Audio CD and MP3/WMA MP3 CD Operation Repeat You WMA can play recordings on MP3/WMA formatted play can CD-ROM, CD-R, or CD-RW discs. 2 Press REPEAT to select ? Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press ? ENTER and playback a disc. disc. The repeat icon ? desired a repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on a disc. does not Off(No display): Operation play repeatedly. starts. 1/12 0:00:00 playing on a WMA appears. Audio CD or MP3 CD title/chapter/all/track a 1 Press REPEAT when The DVD/CD Receiver PLAY Track/All/Off Audio CD List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 Search CD 1 Press m or WMA Mduring playback. The receiver will 2 Press m MP3 now M or go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). 3 To exit SEARCH required or MX2, mode, press PLAY. MP3 / WMA 1. Press v / V to select folder, and press ENTER to the folder contents. see 2. a Press v / V to select ENTER. a MP3 / WMA disc track then press PLAY or starts. Playback with this player 48 Sampling frequency: within 24 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32- 192kbps (WMA) kHz (MP3), The DVD/CD Receiver cannot read an limited ? as compatibility is follows: within 32 - - 0:00:00 1/104 ? MP3 List Program ? 1-Music1 - MP3/WMA 2-Music2 file that has 3-Music3 file extension other than a 4-Music4 ".mp3" / ".wma". 5-Music5 6-Music6 7-Music7 ? CD-R ? If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is otes If you are in file list a on to return to the Folder the MP3/WMA list, use menu the v / V to Press MENU to On a move highlight to the next page. switch MP3/WMA and JPEG menu. MP3/WMA top of the JPEG word lighted. Then, use file, you can is high- b / B to select MP3/WMA or JPEG then press ENTER. Pause 1 Press PAUSE/STEP WMA playback, PAUSE/STEP again. Press . track or or to return case or briefly CD, the track number names should have must incorporate They should not to CD step back to go using a maximum of 8 letters and .mp3 or .wma extension. contain special letters such as an / ? *:"<>letc. ? The total number of files on the disc should be less than 999. directly are press requires discs and recordings to the WMA to the next track. previous to any optimal playback quality. Pre-recorded DVDs automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MP3 briefly during playback to go to the beginning of the current of audio File Creator, which achieve > Press . twice In press PLAY to another Track MP3 / WMA files. We to meet certain technical standards in order to during playback. 2 To return to Moving playback This DVD/CD Receiver MP3 CD ? Press TITLE and menu on to format should be ISO 9660 recommend that you use Easy-CD creates an ISO 9660 file system. ? CD with MP3/WMA file and JPEG or impossible and want and press ENTER. physical track, the numbered buttons track. enter (0-9) these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. during playback. 21 JPEG Disc Viewing This unit a Operation JPEG disc JPEG JPEG disc as play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. can Insert disc and close the tray. The JPEG menu appears on the TV notes on ? a screen. with this is limited player follows: upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents. If you don't Depending see an on-screen display after several minutes, of the files may be too large reduce the resolution of the JPEG files to less than 2760 x some JPEG 2048 List compatibility Preview --- pixels and burn another disc. JPEG Folder 1 ? JPEG Folder 2 The total number of files and folders on the disc JPEG Folder 3 should be less than 999. JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 ? Some discs may be incompatible due to recording format or the condition of disc. ? Ensure that all the selected files have the JPEG Folder 8 Press 2 v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder remote to list, use the v / V buttons on ? the and press ENTER. highlight Windows viewing a file, you can press STOP previous menu (JPEG menu). to move There four Slide : Speed options > (Slow), >> (Normal), >>> (Fast) and II (off). Use v/V/b/B to highlight the Speed. Then, use b / B select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. are JPEG SLIDE SHOW Use vVbBto to highlight the (Slide Show) then press ENTER. JPEG STILL PICTURE Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide PAUSE/STEP show, press PLAY (. or >) to advance to the next or once picture 22 during showing clockwise or while previous TO ROTATE PICTURE Press b / B press again. JPEG MOVING TO ANOTHER FILE Press SKIP or a viewing a picture file. JPEG picture to rotate the counter-clockwise. into the CD ".jpg" layout. the files ".jpe" or ".jpeg" extensions, please as ".jpg" file. without names While ips 1. File them to be read to the ? rename ? copying different If the files have If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. 3 ? extensions when a by are ".jpg" extension will not be able this DVD/CD Receiver. Even shown Explorer. as JPEG image files in though Programmed Playback MP3 CD WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert disc. a REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Press REPEAT when below. Press REPEAT to select disc. The repeat a desired repeat mode. JPEG ? Program a 1/104 MP3 List playing icon appears. 2. 0:00:00 can Program List Track1 Track8 Music Folder 1 Track2 Track3 Music Folder 2 Track3 Track12 Music Folder 3 Track4 Track7 Music Folder 4 Track5 Track6 Music Folder 5 Track6 Track9 Music Folder 6 Track7 Track1 Track8 Track10 ? ? TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Off(No display): does not play repeatedly. Music Folder 7 ERASING A TRACK FROM "PROGRAM" Music Folder 8 LIST Audio CD Menu 2 Select or a select track " on the MP3/WMA Menu 1. to 2. (Add)" place additional tracks on the list. can add all tracks in the disc. Select " (Add All)" icon then press ENTER. " Press CLEAR. Alternatively, select (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks ote You erase "List", then press PROGRAM icon then press ENTER to the selected track on the "Program" list. place Repeat Use vVto select the track that you wish to from the Program list. on the list. ERASING THE COMPLETE PROGRAM LIST 3 Select the track you want to start playing on the "Program" list. Press MENU to move to the next Use v / V to select page. 4 (Del all)", then press ENTER. ote Press PLAY or ENTER to start. Playback begins programmed the tracks. the order in which you Playback stops after all of the tracks "Program" list have To normal resume 5 back, " select a played on in The programs are also cleared when the disc is removed. the once. playback from track of AUDIO programmed playCD (or MP3/WMA) list and then press PLAY. 23 Operation DivX Disc Using this DVD/CD Receiver you Insert 1 Operation a appears disc and close the on the TV can play DivX disc. DivX disc tray. The DivX menu as compatibility with this player is limited follows: screen. ?A vailable resolution size of the DivX file is under 0:00:00 720x576 1/12 (W x H) pixel. DIVX ? List The file name of the DivX subtitle is available 20~40characters Movie Folder 1 Movie Folder 2 Movie Folder 3 ? Movie Folder 4 Movie Folder 6 Movie Folder 8 ? a folder, and press ENTER. A ? list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on " express in the DivX mark on the dis" _ If the number of the screen frame is 1 2 impossible code to may be displayed as play. Movie Folder 7 Press v / V to select (different by language). If there is file, it Movie Folder 5 by the remote to highlight 4 Press STOP to exit. operate normally. If the video and audio structure of recorded file If the file is recorded with ports 3 30 per or audio is out- putted. ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. not is not interleaved, either video and press ENTER. second, this unit may over * some of 1-point GMC, the unit sup- of the record level. GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 There encoders, like DivX are or Xvid, have this option. different levels of GMC 1-point, 2-point, or 3-point encoding, usually called GMC. otes ? Be to select "SUBTITLE ON" mode before sure DivX file ? playback ENTER every time. When the subtile has more than two languages in the original by pressing subtile is only file, available. ? The Pro ? The DivX files in your memory card will not be able to be play. a logic II Sound mode is not available for DivX file. Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 32 48 kHz - within 24 ? Bit 40 24 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) - - - (MP3), Speaker Setup Adjust the for the built-in 5.1 channel following settings surround decoder. 1 If you connected speakers to your DVD/CD Receiver, setting the distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press SET UP. The 2 Use 3 Use setup v menu v appears. listener at the / V to select the AUDIO B to move to Distance option then press then press B to is highlighted. move Press b / B to 4 appears. adjust the Distance of the selected Speaker Setup option to the third level. "Select" ote You Press ENTER and 5.1 time. speaker. the second level. / V to select the same Speaker Setup menu adjust the distance speakers (left & right) only. can of Center speaker and Rear Test AUDIO Press b / B to test the Adjust Speaker Size memorized in the Small Front Left 0 dB Distance 2 m Test the volume to match the Front L Volume of each signals Rear speaker. volume of test signals system. (L) Right (R) → Center → → Front Rear Left (L) Right (R) → → SubWoofer Off Select Move Return Enter 5 Use b / B to select the desired 6 Adjust options using 7 Press ENTER to confirm your selection. The unit returns to the previous menu. v speaker. / V / b / B buttons. Speaker Select speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Speaker, SubWoofer, Rear speakers (Left), or speakers (Right)) a ote Certain speaker settings are prohibited by Digital licensing agreement. the Center Rear Dolby Size Since the speaker settings are fixed, you cannot change them. Volume Press b / B to adjust the output speaker. (-5dB +5dB) level of the selected ~ 25 Operation Additional Information Last Condition Memory Controlling DVD This DVD/CD Receiver memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the If you load the latest stop player. tings memorized, ly recalled. a the TV Your remote control is DVD/CD Receiver as capable well of operating your limited functions of LG TV. as Follow the instructions below to operate for your LG TV. disc that has its set- position is automatical- Before 1 using the remote select the device to be control, press the TV operated. To switch the remote control mode different device), be to (to operate a to press the TV first. sure otes Settings are stored in memory for use any time. This DVD/CD Receiver does not memorize settings of disc if you switch off the DVD/CD Receiver before commencing to play it. 2 The POWER, CH(E/D), VOLUME (+/-), and INPUT buttons on remote control are used to operate the LG TV. a Remote Control Codes for LG TV Hold POWER and press PR/CH(+/-) repeatedly until the TV on or off. Screen Saver The Setting appears when you leave the DVD mode for about five minutes. button screen saver player in Stop ote If the remote control does not System TV, try the other code Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold P/STEP on the front panel or remote control for more than 5 seconds to be able to select system (PAL, NTSC or When the selected a AUTO). system does not coincide with the system of your TV, normal colour picture may not be displayed. AUTO: Select when DVD/CD Receiver is connected with Multi NTSC: system TV. Select when DVD/CD Receiver is connected with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. 26 (E/D) originally supplied Due to the variety or use the remote control with the LG TV. of codes used OUR COMPANY cannot control will operate your particular (LG and Gold Star) by manufacturers, guarantee that the operate every model of LG TV. remote Operation Presetting You can preset make tuning, with Radio the radio stations 50 stations for FM and AM sure Before (MW). that you have turned down the vol- Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 AM 2 3 on the remote control until FM in the (MW) appears display or 2 until the 3 then release. when the DVD/CD Receiver tunes in station. "TUNED" and "STEREO" appear in the display stereo a program) on (D/E) on the remote control. 6 again. Use manual want. (DVD/CD, AV 1, or etc.,). automatic tuning, the remote control For automatic (+) tuning TUN(-) repeatedly. press in step b or 2. TUN (+) B on press and hold TUN(-) b or B for about two seconds on the remote tuning, control. 3 to 6 to store other stations. station with Press TUNING a weak in step 3 manually. Press and hold PROG./MEMO. for about two seconds and "CLEAR ALL" is appeared in the and then press PROG./MEMO. cleared. display window again, the stations are If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" will go off by itself and change to mode. the number buttons on the remote control preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 To clear all the stored stations preset radio station directly a can use to select signal repeatedly or to tune in the station display or the remote control You a preset station you - To select To tune in the remote control on Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. For manual The station is stored. 7 to select the TUN Repeat steps PR(D/E) repeatedly To listen to non-preset radio stations the preset number you want. on Press select another function mode the remote control to select Press PROG./MEMO. window. Press POWER to turn the DVD/CD Receiver off preset number will flash in the display window. Press PR FM appears in the or To turn off the radio window. Press PROG./MEMO. A (for display (MW) Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. on panel for about two seconds frequency indication starts to change, Press BAND until AM The last received station is tuned in. or the front Scanning stops 1 window. And then every time you press BAND, FM and AM (MW) changes alternately. Press and hold TUNING to the radio Listening a (within 3 seconds). For your reference If an FM program is Press MONO/ST. noisy panel so that "STEREO" disappears in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo on the front effect. To improve reception Reorient the supplied antennas. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change the preset number, follow the steps a 5-6 as above. 27 Operation Other Functions XTS Sleep Timer You set the DVD/CD Receiver to turn off automati- can cally 1 at time. specified a Press SLEEP to set the desired The SLEEP indicator and play 2 Setting sleep sleep time. time appears in the dis- window. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. You (Excellent True Sound) enjoy the vivid stereophonic sound of the digital original source without any signal distortion. can Each time you press XTS during 2 channel mode, the setting changes in the following order. XTS-1→XTS-2→XTS-3→NORMAL... Tips: XTS- 1: sound XTS- 2: source front Using the Headphone Connect a stereo headphone PHONES connector. Jack plug ( 3.5mm) The into the speakers are automatically disconnected plug in a headphone (not supplied). the Selecting can use VCRs IN, AV2 IN. Refer Input or to the owner's manual the on supplied operation. repeatedly on the remote desired input source. with control to Each time you press this button, the mode of the function changes in the following sequence: AV1: for selecting the analog signal from AV1 AUDIO IN & VIDEO IN Connectors. AV2: for selecting the analog signal from AV2 AUDIO IN & VIDEO IN Connectors. ote You can also select the FUNC. button 28 via the by playing the sound rear speakers same as the speakers. can operate both XTS- 1 and XTS- 2 woofer at the XTS- 2 mode. on the The XTS- 2 mode is input source by pressing front panel. temporarily disabled when from 2.1 CH to 5.1 CH and it is enabled when changing changing it to 2.1 CH. XTS pro The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the the following order. XTS-P ON other units connected to the AV1 Press AUX select the when you Source the unit for further information (L/R) You effect ote Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. (L/R) of sound at woofer simultaneously and it can complement the relative degrading of the sound pitch of the repeatedly. Mute You sense for you to satisfy with. In the mode of 2 CH BYPASS, It creates the high display This function will change the brightness of the display window on the front panel during in power-on status. Press the DIMMER playing the movie with the weak bass relatively to the general music, it enforces the XTS- 3: Dimmer When → XTS-P OFF setting changes in KARAOKE You can You can Operation play KARAOKE (singing along) with karaoke disc by connecting a microphone to the unit. enjoy KARAOKE with a stereo-recorded disc, even if it is a non-karaoke disc, by reducing the singer's Karaoke Basic Karaoke Advanced Playback Check if the system is connected. (Refer to the page 8-9.) 1 2 3 Turn the powers of TV (or Amplifier) and DVD Karaoke and enter to the video mode on TV. on 5 Adjust MIC Press MIC Press OPEN/CLOSE and load to open the disc tray karaoke disc in the tray with (Z) supplied facing up. Press OPEN/CLOSE (Z) to close the MAX ~ tray. on To Adjust ECHO You can volume [TV Screen] decrease it. Volume (D/E) on increase the echo volume MAX or echo effect to the sound from the Press ECHO VOL. Press DVD/KARAOKE. Operation the remote control to microphone steps) give an microphones. Playback Volume VOL.(D/E) increase the (MIN the label 4 To voice. the remote control to or decrease it. (MIN ~ steps) Key Control You change the key to suit your vocal range. You can adjust the key to 13 steps (6 steps higher, steps lower and the original key). The setting appears on the screen. can Press b- KEY CON. - # buttons remote control to find the key repeatedly on 6 the that suits your vocal range. To flatten the Connect the 6 jack. 7 microphone To sharp the CONTROL Select the melody number you want by pressing NUMERIC buttons. If you cancel the selected the CLEAR. 8 to the MIC 1 or MIC 2 CONTROL melody number, press key one by one, press the KEY (b) repeatedly during playback. key one by one, press the KEY (#) repeatedly during playback. To return to the original key, press the (b/#) repeatedly to appear KEY CONTROL the original key. Press PLAY. The selected melody number is played. Sing in tone with microphone. After melody ends, it is stopped automatically score and appears. ote When you use a microphone except Karaoke function, you can't enjoy 5.1 channel output. Only 2 channel sound will out by the influence of the microphone system. 29 KARAOKE Reserving Operation the Karaoke MENU Songs Playback When you want to make a reservation of next melody, you can enjoy the most 8 melodies reservation Preparation Without The main MENU appears 1 2 3 waiting. Press the NUMERIC buttons to melody number you want play mode. Melody number appears on Press MENU on the karaoke mode. Main MENU reserve on (On the screen. the TV screen) in the karaoke disc the TV screen. Press PROG./MEMO. The melody number is made Repeat steps You a reservation. 1-2. can reserve 8 songs. ip After the will be one song finishes its playback, the next song playback automatically. To cancel the reserved song Each time you press CLEAR, the reserved song will be cancelled one by one. To cancel or change Press the PROG. to the wrong reserved song move to the desired position, SETUP Select SET UP 1 v/V by pressing the main on menu. 2 Use b/B to select the desired then press option ENTER. then press the CLEAR to cancel the reserved song. Male/Female Function If you want to sing a song of MAN's or WOMEN's key, press MALE/FEMALE button repeatedly to change MAN's or WOMEN's can use this function when you want to play fast or On : When + Off On Off On Off repeatedly during singing to play To cancel On singing by selection of out after piece comes Press TEMPO On SCORE ON/OFF ( slow. ? Off key. Tempo Change You On one it, select the Off Off ) melody, song score of song is ended. . faster. ? Press TEMPO - repeatedly during singing slower. FANFARE ON/OFF On : Shadow Function If the caption and the song's subtitle are mixed up, the song's subtitle may be invisible. In this case, to highlight the song's subtitle, press SHADOW. It will be highlighted by background shadow image. On ( In condition of POWER screen To cancel it, select the - : When Off on . On ( singing by appears To cancel : the TV chorus is heard To cancel it, select the melody, a selection of sound. Off . ote To 30 move song . On singing by ) screen. it, select the Off When Off selection of CHORUS ON/OFF ( On out after comes finished. LY RIC ON/OFF On ) ON, scoring fanfare operates. The fanfare sound singing Off to the main menu, press MENU. Off melody, ) song lyric KARAOKE MUSIC LIST Operation ( ) LOCAL SONG (1. LAGU SONG 1 SINGER LIST INDONESIA) and POP (2. LAGU POP) the main The LOCAL menu PENYANYI) 1 Select "2. DAFTAR PENYANYI" and select the ini- Select "2. DAFTAR MUSIK" on DAFTAR (2. by pressing the v/V tial of the you want by pressing the v/V in the SONG LIST and SINGER LIST menu, and singer press ENTER. menu. SONG, POP SONG and CLASSIC will be shown on the TV Operation 3 screen. A B C D E F G 2 Select the you want and press ENTER. Select "1. LAGU INDONESIA" 2 by pressing or singer the TV 3 Bintang screen. 3 Select the song title of the pressing you want the v/V, and press ENTER. 0316 SONG LIST the v/V, "2. LAGU POP" the v/V, and press ENTER. SONG LIST and SINGER LIST menu will be shown on by pressing (1. DAFTAR Hilangnya singer Searan... 3 by Bintang LAGU) 1 Select "1. DAFTAR LAGU" and select the initial of the song title you want press ENTER. by pressing the v/V, then 2A otes B C To D move the previous mode, E vV, then press ENTER. F Press b/B to G 2 Select the song title you want v/V, and press ENTER. 0929 2 DSD by pressing move select the by pressing the to the page. the Peter Pan 31 KARAOKE RANDOM Operation ( ) 5 1 Select "3. PEMUTARAN ACAK" v/V on the main by pressing Select number you want and press ENTER. Sing along with the 7 When reaching Press ENTER to It has a ( function which the main It appears enjoy a song game by pressing v/V below. 123456789 60708090 Select "TENTUKAN JUMLAH KEMENANGAN" 2 by pressing v/V, and select buttons 1~9by pressing one of NUMERIC b/B to select winner's number. Select "NILAI LOMBA" 3 of by pressing v/V, and 60,70,80 or 90 by pressing b/B to select one select success score. Select "MULAI" 4 press by pressing vVbB, ENTER. It appears as below. 0 0 32 as blue team targeted winning number, on the TV the screen. below. dividing by menu. as the or ) Select "4. LOMBA KARAOKE" on of red team begin randomly. two teams of red team & blue team. 1 accompaniment. "SELAMAT!" will be shown It appears CHALLENGE v/V/b/B menu. Repeat step 4-5. Change the team alternately. 2 by pressing then Whether you keep going the song game or not, select "1. YA" or "2. TIDAK" by pressing v/V as below. Language Codes Use this list to your desired language for the Disc Audio, Disc Subtitle, Disc Menu. input following initial settings: Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 7869 Telugu 8469 6678 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Turkish 8482 Burmese 7789 Irish 7165 Polish 8076 Turkmen 8475 Byelorussian 6669 Italian 7384 Portuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 8471 8479 Country Codes Choose a country code from this list. Country Afghanistan Argentina Code Code Code ET Country Malaysia MY Saudi Arabia SA FJ Maldives MV SN AR Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Dutch Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE Chile CL Hong Kong Hungary HU NG Switzerland CH China CN India IN Nigeria Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY Czech Republic AF Country Code Country Ethiopia Fiji SG SK UG Denmark DK Japan Kenya Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG LY Romania RO Vietnam VN El Salvador SV Libya Luxembourg LU Russian Federation RU Zimbabwe ZW 33 Refrnce Troubleshooting Check the following guide for the possible of cause a before problem contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Insert does not work. No Plug (Check lit.) picture. ? The TV is not set to receive DVD signal ? output. Select the the TV on appropriate video input mode so the picture from the DVD/ CD Receiver appears ? The video cable is not connected ? securely. There is no sound or ?T ? The ? connected with the equipment audio cable is not set to receive DVD The audio cables not connected are playback picture is jacks the TV. Select the correct ? input mode of the so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ?T ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. ? Insert ? screen. you can hear the sound from the DVD/CD Receiver. securely. The urn on audio receiver signal output. ? the TV securely. The connected TV power is turned off. a on Connect the video cable into the ? very low-level sound is heard. only into the that the DVD or, audio CD indicator in the DVD display is a disc. securely connecting cable is damaged. dirty. urn on the equipment connected with the audio cable. it with a new one. poor. The DVD/CD Receiver does not start playback. a disc. (Check that the DVD, audio CD indicator in the DVD or display is lit.) ? An disc is inserted. unplayable ? Insert a (Check the disc system and Regional code.) playable type, colour ? The disc is placed upside down. ? disc. Place the disc with the playback side down. ? The disc is not within the placed guide. ? Place the disc inside the ? The disc is ?Amenu is dirty. on the TV screen. on the disc tray correctly guide. ? Clean the disc. ? Press the SET UP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Loud hum or noise is ? The plugs and jacks are ?W dirty. ipe or change level. them with a cloth slightly mois- tened with alcohol. heard. ? The disc is ? The ? dirty. and speakers components connected poorly. are The DVD/CD Receiver is located too close to the TV. 34 rating function Rating ? Clean the disc. ? Connect the speakers and components securely. ? Move your TV away from the audio components. Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ?T une in the station in with automatic No stations have been preset or preset manually. Refrnce ? Preset the stations ? Point the remote control at the remote (page 27). stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? The remote control is not remote properly. ? sensor pointed at the of the DVD/CD Receiver. The remote control is too far from the sensor ? DVD/CD Receiver. ? There is an Use the remote control within about 23 ft obstacle in the path of the of the DVD/CD Receiver. (7 m). ? Remove the obstacle. are ? Replace panel ? Press DIMMER remote control and the DVD/CD Receiver. ? The batteries in the remote control flat. The front panel display is too dim. ? Nothing display. is displayed on the front the batteries with on new ones. the remote control. 35 Specifications Power Power Refer to main label Mass Genral External dimensions CD/ VD AM [MW] H x D) x 54 x 350 Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 5°C to 35°C, Operation More than 75 dB (1 kHz, NOP, output 87.5 10.7 MHz 60 dB 140 - 522 - (Mono) 10,000 Hz 1,620 kHz 450 kHz 70W+70W(8Ωat1kHz,THD10%) Front: 70W + 70W (THD 10 %) (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 70W Inputs Outputs AV Surround*: 70W 70W + (8Ω Designs 36 kHz, THD at 1 Subwoofer*: 150W IN, MIC Jacks (4Ω at 30 Hz, ( 3.5mm) THD 10 S-VIDEO, MONITOR, PHONES: (32 Ω, Type Impedance Frequency Response 1 Centre Speaker Way 150 Input Power Input Power H Speaker x - D) (1m) Passive Subwoofer 1 Way 2 Speaker (LHS-55TBW) 1 Way 150 86 dB/W Speaker 4Ω 20,000 Hz - 1 (1m) 40 - 1,500 Hz 82 dB/W 70W 70W 150 W 140 W 140 W 300 W 280x1200x280mm Weight V) 8Ω 20,000 Hz 86 dB/W Rated x 2 %) %) 1.0 speaker 10 (LHS-55TBC) 8Ω Sound Pressure Level (W 1 108.0 MHz - (LHS-55TBS) Suplied Acesori LPF/A-Filter) (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1 Stereo mode Net 20 kHz 0.5 % output Net Dimensions nm More than 70 dB Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Max. 650 laser, wavelength 625/50, NTSC 525/60 Satellite Speakrs status: Horizontal 200 Hz to 20 kHz output Video mm 5% to 85% Surround mode Amplifer 430 Laser Component FM x kg Temperature: S-video Video (W 3.9 Operating conditions Operating humidity Video Tuner Refer to main label supply consumption 2..38kg (1m) 500x83x90mm 195x402x360mm 0.71kg 6.2kg ?Speakers..........................6?Speakercables......................6 ?AMloopantenna.....................1?FMantenna.........................1 ?Remotecontrol......................1?Batteries(AAA).......................2 ?V ideocable.........................1 and specifications are subject to change without notice. ">
Download
Just a friendly reminder. You can view the document right here. But most importantly, our AI has already read it. It can explain complex things in simple terms, answer your questions in any language, and help you quickly navigate even the longest or most compilcated documents.
Public link updated
The public link to your chat has been updated.
Document public link
Advertisement
