LG HBS-500 Owner's Manual

LG HBS-500 Owner's Manual
Description of parts
How to Use
Memory Flex Neck
Strap
MFB (Multi-Function Button) :
Power/Call/Play Button
Charging Port
LED Indicator
English
Microphone
Earbud (L)
VOLUME UP Button
(FF, Next Song)
VOLUME DOWN Button
(REW, Previous Song)
Earbud (R)
Package Contents
HBS-500 User Manual
Bluetooth® Stereo Headset
Disposal of your old appliance (as per e-waste Rules)
1 When this crossed-out wheeled bin symbol is depicted on the product and its
operator’s manual, it means the product is covered by the e-waste Management
and Handling Rules, 2011 and are meant to be recycled, dismantled, refurbished
or disposed off.
2 Dos
a. The product is required to be handed over only to the authorized recycler
for disposal.
b. Keep the product in isolated area, after it becomes non-functional/
un-repairable so as to prevent its accidental breakage.
Don’t
a. The product should not be opened by the user himself/herself, but only by
authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap
dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product exposed area.
3 Any disposal through unauthorized agencies/person will attract action under
Environment (Protection) Act 1986.
4 Hazards of improper handling or accidental breakage:
If batteries are disposed incorrectly, it can greatly harm the environment. The
chemical by-products are hazardous. The metals and chemicals found in
batteries can mix into soil which may be hazardous to humans, plants and
animals. If thrown in fire, they can cause blast and release toxic gases which may
be harmful for health.
5 To locate a nearest collection centre or call for pick-up (limited area only) for
disposal of this appliance, please contact Toll Free No. 1800-180-9999 for
details. All collection centre and pick up facilities are done by third parties with
LG Elctronics India Pvt. Ltd. merely as a facilitator. For more detailed information,
please visit : http://www.lge.com/in.
Extra Ear Gels
(medium & large)
USB Charging
Cable
User Manual
Warranty Card E-waste card
- The small size Ear Gels are equipped to the product.
Specifications
Rev 2.0 ID
All rights reserved.
LG Electronics Inc., 2015
Note: For the best performance and
to prevent any damage to, or misuse of the
HBS-500, please read all of the information
carefully prior to using the HBS-500.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information shall
only be made by LG Electronics Inc.
How to Use
Power On / Power Off
Item
Description
Bluetooth specification
Battery
Standby time / Talk Time
Music play time
4.1 (Headset / Hands-Free / A2DP / AVRCP Profiles)
Battery 3.7 V / 125 mAh Li-Polymer
Up to 500 hours / Up to 9 hours
Up to 7.5 hours
Charging time
Less than 2 hours
Charging rated input
Operation temperature
Dimension / weight
DC 4.75 V ~ 5.6 V, 400 mA
-10°C ~ 60°C
140 mm (W) X 168 mm (L) X 18.1 mm (T) / 29 g
®
Pairing
- Power On : Press and hold the MFB for 2 seconds.
- Power Off : Press and hold the MFB for 3 seconds.
-B
efore using the headset for the first time, you must pair it with a Bluetooth-enabled
handset.
Charging
- When the charger is connected (with the power on or off) the headset will turn off.
- While charging, the LED indicator will show a solid red light and then change to
violet when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
Press and holding the VOLUME DOWN button for 1 second.
Battery Status
High
Medium
Low
Voice Prompt
Battery High
Blinking
Blue
Battery Medium
Blinking
Violet
Battery Low
Blinking
Red
LED Indicator
Easy Pairing (First Time Pairing)
1. Press and hold the MFB for 2 seconds to turn on the HBS-500. When the headset
enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, find the Bluetooth Menu and search for or add new devices.
• Select LG HBS500 from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter 0000 (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear “Your headset paired.”
• The HBS-500 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press the VOLUME DOWN button and press and hold the
MFB for 2 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 3.
How to Use
How to Use
Multi-connection
Auto Reconnect
Advanced Multipoint
The HBS-500 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
-P
air the headset with one of your Bluetooth-enabled handsets (see the pairing
instructions on page 4).
- Turn off the headset.
-W
ith the power off, press the VOLUME DOWN button and press and hold the
MFB for 2 seconds to enter Manual Pairing mode.
-P
air and connect the headset with your other Bluetooth-enabled handset. (this
will be your primary handset).
-O
nce this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-500 is connected to two handsets at the same time
(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-500 will enter pairing mode.
Calling Function
-V
oice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
-W
hile speaking on an active call, press the MFB for 1 second to switch to an
incoming call.
- To switch between 2 active calls, press the MFB for 1 second.
- To terminate the active call or both calls at once, briefly press the MFB.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
- The headset and handset will automatically reconnect when the HBS-500 is
turned back on while in range.
- The secondary handset need to be connected via selecting LG HBS500 from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-500 will vibrate to alert.
* If vibrate is set to off pressing and holding the VOLUME UP button for 2 seconds,
HBS-500 will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briefly press the MFB on the HBS-500 to reconnect
manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset’s
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS-500 will alert once with no attempt
to reconnect.
How to Use
Voice dialing
- Briefly press the MFB to activate Voice Command.
Note: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
Last number redial
- Press and hold the MFB for 1second to activate Last Number Redial.
The headset will beep, and call the last number dialed.
Call waiting
- Answer a second call without hanging up the first call by pressing the MFB for
1 second (you will hear a beep). Press the MFB for 1second to return to the
original call.
- Briefly press the MFB to terminate the active call or both calls at once. (subject
to handset’s support)
Rejecting a Call
- Press the MFB for 1 second when the handset rings.
Mic Mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time
for 1 second to mute/unmute the Mic during conversation.
Volume control
Calling
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* HBS-500 will not vibrate if vibration function is on ‘off’.
- Briefly press the VOLUME DOWN button to stop vibration.
- Briefly press the MFB.
Transferring a call
- While on a call on your handset, press and hold the VOLUME UP button for 2
seconds on the HBS-500 to transfer the audio either from headset to handset or
from handset to headset.
- Press the VOLUME button.
Audio streaming controls
- PLAY : Double press MFB.
- PAUSE : While playing music, double press MFB.
- NEXT SONG : Double press VOLUME UP button.
- PREVIOUS SONG : Double press VOLUME DOWN button.
- FAST FORWARD : Press and hold VOLUME UP button.
- REWIND : Press and hold VOLUME DOWN button.
How to Use
Equalizer
- While playing music, press and hold the VOLUME UP and VOLUME DOWN
buttons at the same time for 1 second to switch between Bass Boost (default),
Normal, and Treble Boost.
- The bass coming from the speakers can vary as a result of the size of the ear gel
that is being used.
LED Indicator
Precautions
Function
HBS-500 Status
Action
Pairing mode
The blue LED light stays on.
Operating Headset / hands-free The blue LED light flickers 1 time.
profile connected
Call connected
The blue LED light flickers 1 time.
The red LED light stays on and changes to
Charging
violet when charged 80% and above.
Charging
Charging complete
The blue LED light stays on.
Vibrate Control
- To activate or deactivate the Vibrate function, press and hold the VOLUME UP
button for 2 seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated or
deactivated.
- When the HBS-500 is set to vibrate off, the headset will not vibrate when receiving an
incoming call or when it is out of range.
- By powering the unit off and then powering the unit back on, the vibration functionality
will be activated.
Tone & TalkTM
The HBS-500 Bluetooth headset supports SMS reading on
AndroidTM based devices.
To download the application, search for Tone & Talk in Google
PlayTM * or scan the QR code. Follow the installation instructions.
* Google Play is a trademark of Google, Inc.
Troubleshooting
Issue
Does not
turn on
Unable to
communicate
with the LG
Bluetooth
Headset
HBS-500
Unable to pair
the HBS-500
with the
Bluetooth
device
Low sound
(speaker)
Possible problem
Check whether the battery of
the HBS-500 is fully charged.
Check whether the handset
supports the headset or
hands-free Bluetooth profiles.
Resolution
Charge the battery.
Determine whether your
handset supports the headset
or hands-free Bluetooth profiles.
Check whether the battery of
the HBS-500 is low.
Charge the battery.
Check and make sure the
headset is on.
Press and hold the MFB for 2
seconds to turn on the headset.
Check and make sure the
headset is placed in pairing
mode.
Press the VOLUME DOWN
button and press and hold the
MFB for 2 seconds.
Check the speaker volume.
lncrease the volume level.
Do not drop the unit from high places.
Do not modify, repair, or take apart.
Do not expose directly to water, alcohol, benzene, etc., for cleaning.
Do not expose directly to flammables.
Do not place or keep the unit near flammables.
Keep unit away from humidity & dust.
Do not place heavy objects on the unit.
Only use the headset with an original LG charger, otherwise it may be damaged.
•C
hanges or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• There is a risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• The neck strap is made of a shape memory alloy. However, bending the neck strap
repeatedly is not recommended.
• This product contains small parts, including earphones, ear buds, and cables. Keep
out of reach of children.
• If you have an implanted medical device, consult with a doctor prior to using this
product.
• Always unplug the charger from the wall socket after the device is fully charged to
save unnecessary power consumption of the charger.
•L
i-ion Battery is a hazardous component which can cause injury.
•B
attery replacement by non-qualified professional can cause damage to your device.
•D
o not replace the battery by yourself. The battery can be damaged, which can
cause overheat and injury. The battery must be replaced by the authorized service
provider. The battery should be recycled or disposed separately from household
waste.
Declaration of Confirmation
Additional Information
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user’s authority to
operate the device.
CE NOTICE TO USERS :
Hereby, LG Electronics Inc. declares that this HBS-500 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive atmosphere.
It is rare, but your electronic device could generate sparks. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often, but not always, clearly marked.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
- In case this product contains a battery incorporated within the product which cannot be
readily removed by end-users, LG recommends that only qualified professionals remove
the battery, either for replacement or for recycling at the end of this product’s working life.
To prevent damage to the product, and for their own safety, users should not attempt to
remove the battery and should contact LG Service Helpline, or other independent service
providers for advice.
- Removal of the battery will involve dismantling of the product case, disconnection of
the electrical cables/contacts, and careful extraction of the battery cell using specialized
tools. If you need the instructions for qualified professionals on how to remove the
battery safely, please visit http://www.lge.com/global/sustainability/environment/takeback-recycling.
FCC ID: BEJHBS500
Additional Information
1. Radio frequency exposure
This Bluetooth® Stereo Headset HBS-500 is a radio transmitter and receiver. When in
operation, it communicates with a Bluetooth® equipped mobile device by receiving and
transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency
range 2.4 to 2.4835 GHz.
Your Bluetooth® Headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health agencies when
used with any compatible LG Electronics mobile phone.
3. Battery information
A rechargeable battery has a long service life if treated properly. A new battery or one that
has not been used for a long period of time could have reduced capacity the first few times
it is used. Do not expose the battery to extreme temperatures, never above +60°(+140°F)
or below -10°(14°F). For maximum battery capacity, use the battery in room temperature.
If the battery is used in low temperatures, the battery capacity will be reduced. The battery
can only be charged in temperatures between +10°(+50°F) and +45°(+113°F).
Removal of waste batteries and accumulators
(Product with embedded battery ONLY)
Additional Information
4. Recycling the battery in your Bluetooth® Headset
The battery in your Bluetooth® Headset must be disposed of properly and should never be
placed in municipal waste.
Disposal of waste batteries/accumulators
1 This symbol may be combined with chemical symbols for mercury (Hg), cadmium
(Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of
cadmium or 0.004% of lead.
2 All batteries/accumulators should be disposed separately from the municipal waste
stream via designated collection facilities appointed by the government or the local
authorities.
3 The correct disposal of your old batteries/accumulators will help to prevent potential
negative consequences for the environment, animal and human health.
4 For
more detailed information about disposal of your old batteries/accumulators,
please contact your city office, waste disposal service or the shop where you
purchased the product.
5. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser by the
dealer, specifying the date of purchase and serial number, is presented with the product
to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if
this information has been removed or changed after the original purchase of the product
from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced product
shall be warranted for the remaining time of the original warranty period or for ninety
(90) days from the date of repair, whichever is longer. Repair or replacement may
involve the use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to normal wear and
tear, or due to misuse, including but not limited to use in other than the normal and
customary manner, in accordance with instructions for use and maintenance of the
product. Nor does this warranty cover any failure of the product due to accident,
modification or adjustment, acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair installations,
modifications or service performed by a non-LG Electronics authorized person.
Tampering with any of the seals on the product will void the warranty.
Limited Warranty
SUBJECT TO THE CONDITIONS OF THIS LIMITED WARRANTY, LG
ELECTRONICS WARRANTS THIS PRODUCT TO BE FREE FROM DEFECTS
IN DESIGN, MATERIAL AND WORKMANSHIP AT THE TIME OF ITS ORIGINAL
PURCHASE BY A CONSUMER, AND FOR A SUBSEQUENT PERIOD OF SIX(6)
MONTHS. SHOULD YOUR PRODUCT NEED WARRANTY SERVICE, PLEASE
RETURN IT TO THE DEALER FROM WHOM IT WAS PURCHASED OR CONTACT
YOUR LOCAL LG ELECTRONICS CONTACT CENTER TO GET FURTHER
INFORMATION.
Important safety information
Avoiding hearing damage
Permanent hearing loss may occur if you use your Handsfree car kit at a high
volume. Set the volume to a safe level. You can adapt over time to a higher volume of
sound that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or muffled speech, stop listening and have your
hearing checked. The louder the volume, the less time is required before your hearing
could be affected. Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use Headset at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
Please refer to your handset user guide for more information on how to adjust
listening levels on your handset.
Using headsets safely
Use of Headset to listen to music while operating a vehicle is not recommended and
is illegal in some areas. Be careful and attentive while driving. Stop using this device
if you find it disruptive or distracting while operating any type of vehicle or performing
any other activity that requires your full attention.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement