LG HBS-750 Owner's Manual

LG HBS-750 Owner's Manual
Description of parts
How to Use
CALL Button,
LED Indicator
- Before using the headset for the first time, you must pair it with a Bluetooth-enabled
- To pair your headset with an additional handset, the headset must be placed in
Pairing Mode.
- There are 2 Pairing Mode Methods with the HBS-750.
Memory Flex Neck Strap
Power Switch
Earphone (L)
REW Button
FF Button
Earphone (R)
HBS-750 User Manual
BLUETOOTH® Stereo Headset
Package Contents
Disposal of your old appliance (as per e-waste Rules)
1 When this crossed-out wheeled bin symbol is depicted on the product and its
operator’s manual, it means the product is covered by the e-waste Management
and Handling Rules, 2011 and are meant to be recycled, dismantled, refurbished
or disposed off.
2 Dos
a. The product is required to be handed over only to the authorized recycler
for disposal.
b. Keep the product in isolated area, after it becomes non-functional/
un-repairable so as to prevent its accidental breakage.
a. The product should not be opened by the user himself/herself, but only by
authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product exposed area.
3 Any disposal through unauthorized agencies/person will attract action under
Environment (Protection) Act 1986.
4 Hazards of improper handling or accidental breakage:
If batteries are disposed incorrectly, it can greatly harm the environment. The
chemical by-products are hazardous. The metals and chemicals found in
batteries can mix into soil which may be hazardous to humans, plants and
animals. If thrown in fire, they can cause blast and release toxic gases which may
be harmful for health.
5 To locate a nearest collection centre or call for pick-up (limited area only) for
disposal of this appliance, please contact Toll Free No. 1800-180-9999 for
details. All collection centre and pick up facilities are done by third parties with
LG Elctronics India Pvt. Ltd. merely as a facilitator. For more detailed information,
please visit : http://www.lge.com/in.
Earbuds (2 Sets) USB Charging Cable
User Manual Warranty Card E-waste card
Rev 2.0 ID
All rights reserved.
LG Electronics Inc., 2015
Note: For the best performance and
to prevent any damage to, or misuse of the
HBS-750, please read all of the information
carefully prior to using the HBS-750.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information shall
only be made by LG Electronics Inc.
Bluetooth specification
Standby time / Talk Time
Music play time
Charging time
Charging rated input
Operation temperature
Dimension / weight
3.0 (Headset / Hands-Free / A2DP Profiles)
Battery 3.7V / 195mAh Li-Polymer
Up to 500Hrs / Up to 15Hrs
Up to 10Hrs
< 2.0Hrs
DC 4.75 V ~ 5.6 V, 400mA
-10°C ~ 60°C
138.5(W) X 173.1mm(L) X 17.5mm(T) / 36g
Easy Pairing (First Time Pairing)
1. M
ove the Power switch to the ‘ON’ side to turn on the HBS-750. When the headset
enters Pairing Mode, the LED indicator will show a solid blue light.
2. U
sing your handset, find the Bluetooth Menu and “search for” or “add” new
elect “LG HBS750” from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter “0000” (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
nce pairing has completed successfully, you will hear “Your headset paired.”.
• The HBS-750 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
ith the power off, press the CALL button and move the Power switch to the ‘ON’
side at the same time for 2 seconds.
hen the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 3.
How to Use
Power On / Power Off
- Move the Power switch to the ‘ON’ or ‘OFF’ side.
hen the charger is connected, with the power on or off, the headset will turn off.
hile charging, the LED indicator will show a solid red light and change to violet
when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Press and hold the VOLUME DOWN button for 1 second.
- There are 3 levels of battery status
Battery status
Voice Prompt
LED display
Battery High
Blue LED
3 times
Battery Medium
Violet LED
3 times
- HBS-750 battery status indicator will appear on the iPhone screen.
Battery Low
3 times
How to Use
How to Use
Auto Reconnect
Advanced Multipoint
The HBS-750 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
air the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on page 2).
- Turn off the headset.
ith the power off, press the CALL button and move the Power switch to the ‘ON’
side at the same time for 2 seconds to enter Manual Pairing mode.
ow, pair and connect the headset with your other Bluetooth-enabled handset.
(this will be your primary handset).
nce this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-750 is connected to two handsets at the same
time(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-750 will enter pairing mode.
Calling Function
oice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
hile speaking on an active call, press the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To terminate the active call or both calls at once, briefly press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
- If the HBS-750 is turned off (either accidentally or intentionally) while connected
to a handset, the headset and handset will disconnect. The headset and handset
will automatically reconnect when the HBS-750 is turned back on while in range.
- Secondary handset need to be connected via selecting “LG HBS750” from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-750 will vibrate to alert.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briefly press the CALL button on the HBS-750 to
reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset’s
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS-750 will alert once with no attempt
to reconnect.
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- Briefly press the VOLUME DOWN button to stop vibration.
- Briefly press the CALL button.
Transferring a call
- While on a call on your handset, press and hold VOLUME UP button for 3
seconds to transfer the audio either from headset to handset or from handset
to headset.
How to Use
Voice dialing
- Briefly press the CALL button to activate “Voice Command”.
Note: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
Last number redial
- Press and hold the CALL button for 1second to activate “Last Number Redial”.
The headset will beep, and call the last number dialed.
Call waiting
- Answer a second call without hanging up the first call by pressing the CALL
button for 1 second (you will hear a beep). Press the CALL button for 1second to
turn to the original call.
- Briefly press the CALL button to terminate the active call or both calls at once.
(subject to handset’s support)
Rejecting a Call
- Press the CALL button for 1second when the handset rings.
Mic Mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously
for 1 second to mute/unmute the Mic during conversation.
Volume control
- Briefly press the VOLUME button.
Audio streaming controls
- PLAY : Briefly press the PLAY/PAUSE button.
- PAUSE : Briefly press the PLAY/PAUSE button.
- STOP : Press and hold the PLAY/PAUSE button.
- NEXT SONG : Briefly press the FF button.
- PREVIOUS SONG : Briefly press the REW button.
- FAST FORWARD : Press and hold the FF button.
- REWIND : Press and hold the REW button.
How to Use
- While playing music, press and hold VOLUME UP and VOLUME DOWN buttons
simultaneously for 1 second to switch between EQ’s (Bass Boost(Default) g
Normal g Treble Boost).
- The bass coming from the speakers can vary as a result of the size of the Earbud
that is being used.
- HBS-750 features aptX® technology that ensures audio content transmitted over
Bluetooth is instant and crystal-clear.
- aptX® is automatically enabled as long as the source device supports it.
LED indication
HBS-750 Status
Power on
The blue LED light flickers 4 times.
The blue LED light flickers 4 times and then
Power off
turns off.
The blue LED light stays on.
Operating Pairing mode
Headset / hands-free The blue LED light flickers 2 times every 5
profile connected
The blue LED light flickers 2 times every 5
Call connected
The red LED stays on and changes to violet
when charged 80% and above.
Charging complete
The blue LED stays on.
Vibrate Control
- To activate or deactivate the ‘Vibrate’ function, press and hold VOLUME UP button for 3
seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated or deactivated.
- When HBS-750 is set to vibrate off, and HBS-750 will not vibrate when receiving
‘incoming call’ and being ‘out of range’.
- By powering the unit off and then powering the unit back on, the vibration
functionality will be activated.
SMS Reader
The HBS-750 Bluetooth headset supports SMS reading on
Android TM based devices.
In Google Play™ Store search for the LG ‘BT Reader’
application and install on your device to use this function.
* The 2D barcode shown below helps you download the LG
‘BT Reader’ application from Google Play™ Store. Google
Play is a trademark of Google, Inc.
Does not
turn on
Unable to
with the LG
Possible problem
Check whether the battery of
the HBS-750 is fully charged.
Check whether the handset
supports the headset or
hands-free Bluetooth profiles.
Check whether the battery of
the HBS-750 is low.
Charge the battery.
Determine whether your
handset supports the headset
or hands-free Bluetooth profiles.
Charge the battery.
Check and make sure the
headset is on.
Unable to pair
the HBS-750
with the
Check and make sure the
headset is placed in pairing
Slide the Power switch to the
‘ON’ side to turn on the headset.
With the power off, press the
CALL button and move the
Power switch to the ‘ON’ side at
the same time for 1 second to
manually place the headset in
pairing mode.
Low sound
lncrease the volume level.
Check the speaker volume.
Do not drop the unit from high places.
Do not modify, repair, or take apart.
Do not expose directly to water, alcohol, benzene, etc. for cleaning.
Do not expose directly to flammables.
Do not place or keep the unit near flammables.
Keep unit away from humidity & dust.
Do not place heavy objects on the unit.
Only use the headset with an original LG charger, otherwise it may be damaged.
hanges or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• There is a risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• The neck strap is made of a shape memory alloy. However, bending the neck strap
repeatedly is not recommended.
• This product contains small parts, including earphones, ear buds, and cables. Keep
out of reach of children.
• If you have an implanted medical device, consult with a doctor prior to using this
• Always unplug the charger from the wall socket after the device is fully charged to
save unnecessary power consumption of the charger.
i-ion Battery is a hazardous component which can cause injury.
attery replacement by non-qualified professional can cause damage to your device.
o not replace the battery by yourself. The battery can be damaged, which can
cause overheat and injury. The battery must be replaced by the authorized service
provider. The battery should be recycled or disposed separately from household
Declaration of Confirmation
Additional Information
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user’s authority to
operate the device.
Hereby, LG Electronics Inc. declares that this HBS-750 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Additional Information
1. Radio frequency exposure
This Bluetooth® Headset, HBS-750, is a radio transmitter and receiver. When in operation,
it communicates with a Bluetooth® equipped mobile device by receiving and transmitting
radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2.4 to
2.4835 GHz.
Your Bluetooth® Headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health agencies when
used any compatible LG Electronics mobile phone.
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive atmosphere.
It is rare, but your electronic device could generate sparks. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often, but not always, clearly marked.
3. Battery information
A rechargeable battery has a long service life if treated properly. A new battery or one that
has not been used for a long period of time could have reduced capacity the first few times
it is used. Do not expose the battery to extreme temperatures, never above +60°(+140°F)
or below -10°(14°F). For maximum battery capacity, use the battery in room temperature.
If the battery is used in low temperatures, the battery capacity will be reduced. The battery
can only be charged in temperatures between +10°(+50°F) and +45°(+113°F).
Removal of waste batteries and accumulators
(Product with embedded battery ONLY)
- In case this product contains a battery incorporated within the product which cannot be
readily removed by end-users, LG recommends that only qualified professionals remove
the battery, either for replacement or for recycling at the end of this product’s working life.
To prevent damage to the product, and for their own safety, users should not attempt to
remove the battery and should contact LG Service Helpline, or other independent service
providers for advice.
- Removal of the battery will involve dismantling of the product case, disconnection of
the electrical cables/contacts, and careful extraction of the battery cell using specialized
tools. If you need the instructions for qualified professionals on how to remove the
battery safely, please visit http://www.lge.com/global/sustainability/environment/takeback-recycling.
4. Recycling the battery in your Bluetooth® Headset
The battery in your Bluetooth® Headset must be disposed of properly and should never be
placed in municipal waste.
Disposal of waste batteries/accumulators
1 This symbol may be combined with chemical symbols for mercury (Hg), cadmium
(Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of
cadmium or 0.004% of lead.
2 All batteries/accumulators should be disposed separately from the municipal waste
stream via designated collection facilities appointed by the government or the local
3 The correct disposal of your old batteries/accumulators will help to prevent potential
negative consequences for the environment, animal and human health.
4 For
more detailed information about disposal of your old batteries/accumulators,
please contact your city office, waste disposal service or the shop where you
purchased the product.
Additional Information
5. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser by the
dealer, specifying the date of purchase and serial number, is presented with the product
to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if
this information has been removed or changed after the original purchase of the product
from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced product
shall be warranted for the remaining time of the original warranty period or for ninety
(90) days from the date of repair, whichever is longer. Repair or replacement may
involve the use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to normal wear and
tear, or due to misuse, including but not limited to use in other than the normal and
customary manner, in accordance with instructions for use and maintenance of the
product. Nor does this warranty cover any failure of the product due to accident,
modification or adjustment, acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair installations,
modifications or service performed by a non-LG Electronics authorized person.
Tampering with any of the seals on the product will void the warranty.
Limited Warranty
Important safety information
Avoiding hearing damage
Permanent hearing loss may occur if you use your Handsfree car kit at a high
volume. Set the volume to a safe level. You can adapt over time to a higher volume of
sound that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or muffled speech, stop listening and have your
hearing checked. The louder the volume, the less time is required before your hearing
could be affected. Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use Headset at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
Please refer to your handset user guide for more information on how to adjust
listening levels on your handset.
Using Headset safely
Use of Headset to listen to music while operating a vehicle is not recommended and
is illegal in some areas. Be careful and attentive while driving. Stop using this device
if you find it disruptive or distracting while operating any type of vehicle or performing
any other activity that requires your full attention.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF