LG FFH-164AD User guide

LG FFH-164AD User guide
DG_FFH-163.164.165(Eng)-A059Y
HI-FI MICRO CD COMPONENT
SYSTEM
OWNER'S MANUAL
MODELS:
FFH-163A/AD/AX, FE-163E
FFH-164A/AD/AX, FE-164E
FFH-165A/AD/AX, FE-165E
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Designs
and
specifications are subject
improvement.
without notice for
to
change
Precautions
CAUTION
CAUTION
Use of controls
or
of proresult
adjustments or performance
specified herein may
cedures other than those
RISK OF ELECTRIC
in hazardous radiation
exposure.
SHOCK DO NOT OPEN
Laser
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
ting
in this
component
product is capable of emitexceeding the limit for Class 1.
radiation
COVER(OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION:INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED. AVOID
EXPOSURE TO BEAM.
VARNING:OSYNLIG LASERSTRALNING NAR
DENNA DEL AR OPPNAD STRALEN AR FARLIG.
Attention:Quand
Explanation Graphical Symbols:
s'exposer
lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
aux
l'appareil est ouvert, ne pas
radiations invisibles du faisceau laser.
The
alert the
user
to the presence of uninsulated
dangerous voltage
This label is located
product's enclosufficient magnitude to
that may be of
a risk of electric shock to persons.
sure
constitute
The exclamation
triangle
on
the interior.
within the
point
within
an
is intended to alert the
equilateral
user
to the
presence of
important operating and maintenance(servicing) instructions in the literature
accompanying the appliance.
This
CLASS 1
LASER
KLASSE 1
LASER
PRODUKT
LUOKAN 1
LASER
LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
Compact Disc player is
product.
classified
PRODUCT
as a
CLASS 1
LASER
WARNING
The CLASS 1 LASER PRODUCT label is located
TO REDUCE THE RISK OF FIRE OF ELECTRIC
the exterior.
on
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
To avoid electrical shock, do not open the cabinet,
Refer servicing to qualified personnel only.
The
apparatus shall
splashing
such
as
and that
not be
exposed to dripping or
objects filled with liquids,
be placed on the apparatus.
no
vases, shall
Warning:
Do not install this
a
book
2
case or
equipment
similar unit.
in
a
confined space such
This product is manufactured to comply with
the radio interference requirements of EEC
DIRECTIVE 89/336/EEC, 93/68/EEC and
73/23/EEC.
Table of Contents
INTRODUCTION
OPERATION
Precautions...........................2
Presettingtheradiostations.
TableofContents......................3
Listeningtotheradio..................11
BeforeUse...........................4
TapePlayback........................12
BasicPlayback.....................12
ToStopPlay.......................12
ToPausePlay......................12
To Play Fast Rewind or Fast Forward.
12
Recording...........................12
BasicSetting.......................12
Recording from Radio, CD or Auxiliary
SafetyPrecautions....................4
NotesonDiscs......................4
NotesonRemoteControl...............4
.
.
.
.
.
.
.
.
.
FrontPanel/RearPanel.................5
RemoteControl........................6
DisplayWindow.......................6
Connections..........................7
SpeakerSystemConnection.
Antenna(Aerial)Connections.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SettingtheVoltage(OPTIONAL).
.
.
.
.
.
.
.
.
.
.7
.7
BEFORE OPERATION
.8
SleepFunction........................8
.
.
.
.11
.
source............................12
CD to
Tape Synchronized Recording
.
.
.
.
.
12
CDPlayback.........................13
BasicPlayback.....................13
ToPausePlay......................13
ToStopPlay.......................13
ToSkippingtheTrack.................13
To Play Fast Rewind or Fast Forward.
13
ToRepeatPlay.....................13
ToProgramPlay....................13
.
SettingtheCLOCK.....................8
.
.
.
.
TimerFunction........................9
REFERENCE
AudioAdjustment.....................10
VolumeAdjustment..................10
.10
SoundQualityAdjustment.
Troubleshooting......................14
Specifications........................15
.
.
.
.
.
.
.
.
.
.
.
MUTE............................10
UBB/HI-TONE......................10
Reception
of RDS
(Radio
Data
System)
Stations-OPTIONAL..................10
AuxiliaryFunction.....................10
About the
symbols
Indicates hazards
for instructions
likely
to
unit itself
or
other material
Indicates
special operating
cause
harm to the
damage.
features of this
unit.
Indicates
tips
and hints for
making
the task
easier.
3
INTRODUC
Before Use
Precautions
Safety
shipping the unit
The
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
To
keep the
Do not
near
use
the center out.
surface clean
volatile
liquids,
such
as
the unit. Do not leave rubber
contact with the unit for
leave marks
discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the unit
Handling
When
Cleaning
a
insecticide spray,
or
long period
plastic products in
of time. They will
the surface.
on
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for
Cleaning
Notes
To clean the cabinet
Use
a
soft, dry cloth. If the surfaces
soft cloth
use a
lightly
solution. Do not
benzine,
or
analog
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents, such
as
these
as
might damage
on
Remote Control
Remote Control
alcohol,
the surface
Operation Range
Point the remote control at the remote
l
Distance:
About 23 ft
remote
on
Discs
l
Angle:
(7 m)
from the front of the
sensor.
sensor.
discs
Remote control
Do not touch the
Hold the disc
on
and press
About 30° in each direction of the front of the
remote
Handling
get
sensor
the buttons.
of the unit.
Notes
records.
the unit
playback side of the disc.
by
edges so that fingerprints
the
or
tape
on
installation
battery
cover on
the
rear
of the remote control, and insert two
the surface.
Do not stick paper
battery
Detach the
will not
the disc.
R03
(size AAA)
and
batteries with
aligned correctly.
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Storing
After
discs
playing,
store the disc in its
case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
sunlight,
as
there may be
increase inside the
4
car.
a
considerable
temperature
Front Panel/Rear Panel
33
OPTIONAL
INTRODUC
AM
FM
GND
34
L
35
R
37
1.
FUNCTION SELECT
(FUNCTION)
AUX)
button
21.
CD/ TAPE/
(TUNER/
2.
TUNER/BAND button
3.
POWER indicator
4.
POWER
5.
Remote Control Sensor
6.
DISPLAY
22.
?
TUNING UP button
?
CD SKIP/SEARCH
?
STOP button
?
CLEAR button
23. CD PAUSE
button
(STANDBY/ON)
24.
REPEAT button
8.
PROGRAM/MEMORY button
26.
PRESET DOWN button
HEADPHONE SOCKET
(PHONES):
3.5mm
12. TIMER button
?
?
TUNING DOWN button
CD SKIP/SEARCH
14.
PLAY
15.
RECORD
16.
REWIND
17.
FAST FORWARD
18.
PAUSE
19.
STOP/EJECT(
(
)
(
button
(
(
)
)
-
-
TUNER
(
)
button
)
button
button
)button
PRESET UP button
-
TAPE
RDS button
?
SET
OPTIONAL
:
(CLOCK/ TIMER)
button
28. VOLUME UP button
29. UBB/Hi-TONE button
30. EQUALIZER PATTERN
31. CD OPEN
(
)
(EQ PATT.)
)
button
33. ANTENNA TERMINAL
button
-
TAPE
(AUX)
35. SPEAKER TERMINAL
36. VOLTAGE SELECT SWITCH
button
)
button
button
34. AUXILIARY INPUT SOCKET
button
(
?
32. CD DOOR
TAPE
button
)
TUNER
27. VOLUME DOWN button
10. CLOCK button
13.
)
-
(
25. MODE/RIF button
7.
11.
(CD
?CDPLAY(
?
9.
36
:
OPTIONAL
37. POWER CORD
20. CASSETTE Holder
5
Remote Control
1.
12
1
UBB/
HI-TONE
23
11
SLEEP
910
45
UBB/HI-TONE button
2.
POWER button
3.
TUNER/BAND button
4.
AUX button
5.
PRESET
6.
CD FUNCTION buttons
8
7
7.
)
button
?
CD PLAY/ PAUSE
?
CD
?
CD SKIP/SEARCH
?
REPEAT button
6
FUNCTION
(
STOP(
)
(
)
(
)
/
button
FUNCTION button
8.
PROGRAM button
9.
VOLUME CONTROL
(
10. EQUALIZER PATTERN
11.
button
button
)
button
(EQ PATT.)
button
MUTE button
12. SLEEP button
Display
Window
1
3
2
4
PROG
RDS
FLAT
UBB
MHz
ROCK
MUTE
kHz
POP
HI
14
TONE
TIMER
1312
11
10
1
ALL
9
SLEEP
STEREO
8
7
CLASSIC
6
1.
PROGRAM
8.
SLEEP indicator
2.
PLAY/ PAUSE indicator
9.
CD REPEAT indicator
3.
FUNCTION indicators
10. TAPE RECORD indicator
4.
RDS indicator
11. TIMER indicator
5.
EQUALIZER PATTERN indicator
12. HI-TONE indicator
6.
FM STEREO indicator
13. MUTE indicator
7.
FM STEREO RECEIVING indicator
14. UBB indicator
6
indicator
REPEAT
:
OPTIONAL
5
Connections
Speaker System
Connect the
Connection
speakers using the supplied speaker cords by matching the colors of the terminals and those
possible surround sound, adjust the speaker parameters (distance, level, etc.).
of the
cords. To obtain the best
INTRODUC
L
R
L
R
Notes
?
Be
sure
to match the
If the cords
?
?
are
If you use front
the speakers.
speaker cord to the appropriate terminal on the components:
reversed, the sound will be distorted and will lack base.
speakers
with low maximum
Do not disassemble the front
Antenna
cover
of
input rating, adjust
the volume
+
carefully
to
+
and
--
to
--.
to avoid excessive
output
on
supplied speaker.
(Aerial) Connections
Connect the
?
Connect
?
Connect
supplied FM/AM antennas for listening to the radio.
the AM loop antenna to the AM antenna connector.
the FM wire antenna (or FM "T" antenna) to the FM 75Ω/300Ω
coaxial connector.
FM external
(aerial)
(not supplied)
antenna
FM indoor antenna
(aerial)
AM
loop antenna (aerial)
(Supplied)
Position it for
the best
AM
(MW) loop
(aerial)
(Supplied)
FM external
antenna
(aerial)
(not supplied)
antenna
coaxial
cable
For AM
AM
the
(MW) reception, connect
loop antenna (aerial) to the
terminal marked AM
FM 75
reception
300 ohms
AM
FM
FM wire antenna
(supplied)
Notes
?
To
?
Be
?
prevent noise pickup, keep the AM loop antenna away from the unit and other components.
sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as horizontal as possible.
7
the
Setting
Voltage (OPTIONAL)
If your set is equipped with a voltage selector at the back side, be
the AC power cord.
sure
to set it to your local power
supplied
before
connecting
the CLOCK
Setting
Press CLOCK.
(If
the clock
CLOCK for
-
The hours
Select
12 hour
a
Use PRESET DOWN/UP buttons to set the
requires setting, press
more than 2 seconds.)
begin to flash.
cycle
or
on
correct hours
on
the front
panel.
Press SET.
24 hour
PRESET DOWN/UP
pressing
panel.
and hold
cycle by
the front
Use PRESET DOWN/UP buttons to set the
correct minutes
on
the front
panel.
Press SET and the correct time is shown
the
(12HR)
(24HR)
or
Press SET to confirm the selected hour
on
display.
Press CLOCK at any time to
for about 3 seconds.
display
the time
cycle.
Note
The unit
can
also set the clock function in power off
state.
Sleep
When the
To
Function
sleep
timer is used, the power is
specify
the time
delay
turned off, press SLEEP.
In the display window you
for about 5 seconds. This
turns off
automatically
automatically
means
pressed the time interval
by 10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
remaining
time until the power is
turned off.
While the
sleep function is active press SLEEP
briefly. The time remaining until it turns off is
displayed for about 5 seconds.
8
time has
elapsed.
Note
can see
before it turns off is reduced
To check the
specified
before the power is
that the system
after 90 minutes.
Each time the button is
turned off after the
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
sleep
sleep
time is
displayed,
timer mode
If you wish to stop the function, press the SLEEP button
repeatedly until 10 appears, and then press SLEEP
once again while 10 is displayed.
Timer Function
With the TIMER function you can have the radio reception and
and recording turned on and off at the time desired.
Press CLOCK to check the current time.
disappears
Press TIMER to enter the timer
setting
window in turn.
setting, press
previous
or
auxiliary
source
Press SET to confirm the minute to switch
TUNER-CD flashes in the
For your reference
If you want to correct the
play, tape play
play
on.
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
For your reference
If you don't set clock, timer function doesn't work.
display
CD
recording,
.
Set the hour to switch off
mode.
by pressing
PRESET DOWN/UP buttons
on
the front
panel.
memorized TIMER
and hold the TIMER button
more
Press SET to confirm the hour to switch off.
than 2
seconds.
-
The
previous
memorized timer
indicators appear in the
on
time and "TIMER"
display.
flashing.
a.
on
the front
Press SET.
When you select the TUNER function,
'PLAY' and 'REC' indicator flash in
the
by pressing
PRESET DOWN/UP buttons
panel.
Press SET when the desired function is
1.
Set the minute to switch off
display
window
alternately
Adjust
for
about 3 seconds.
'PLAY' indicator
by pressing
on
the front
panel.
TUNER
play only
'REC' indicator : TUNER play and
recording
b. Select the previous memorized preset
:
the volume level
PRESET DOWN/UP buttons
Press SET.
"TIMER" appears in the display window and the
timer setting has been completed.
number with PRESET DOWN/UP buttons
the front panel and press SET.
'ON TIME' indicator appears for about
0.5 seconds in the display window and
Switch the system off.
The selected function is
then
on
on
-
disappears.
2. When you select the CD function,
'ON TIME' indicator appears for about 0.5
-
seconds in the
display
window and then
disappears.
To cancel
the timer set
on
on
the front
check the timer
or
cancel. You
can
you can select
also check the timer
pressed
status.
panel.
or check the timer, press the TIMER
that "TIMER" appears in the display window.
To cancel the TIMER, press the TIMER button so that
button
so
"TIMER"
Press SET to confirm the hour to switch
switched
To activate
by pressing
PRESET DOWN/UP buttons
or
Each time the TIMER button is
setting
Set the hour to switch
automatically
and off at the time set.
disappears
in the
display
window.
on.
Note
Set the minute to switch
The unit
on
PRESET DOWN/UP buttons
by pressing
on
the front
can
also set the clock function in power off
state.
panel.
9
BEFORPATIN
Audio
Volume
?
?
Adjustment
Reception of RDS (Radio Data System)
Adjustment
Press VOLUME DOWN/UP buttons clockwise to
Stations
increase the sound level, or counterclockwise to
decrease it on the front panel.
What is RDS?
Press VOLUME CONTROL
introduced
(
)
RDS
to increase the
sound level, or press the VOLUME CONTROL
decrease it on the remote control.
(
)
to
?
Quality Adjustment
can
Select
a
normal radio
by using
impressions.
?
:
ROCK
: more
POP
:
bass, more treble
less bass, less treble
CLASSIC
:
for orchestral music
Headphone
Connect
a
linear
frequency
being
indicator
response
is
a
system gradually being
This data contains various informa-
received.
(or
repeatedly
TUNER/BAND
to appear TUNER
the remote
on
control)
and then press BAND to select FM.
Select
desired station
a
by pressing
TUNING DOWN/UP.
When the RDS transmission is received, the
display shows the program service name (PS)
Socket
stereo
signal.
Press FUNCTION
the EQ PATT.
button.
FLAT
System)
including
radio station
choose between 4 fixed sound
desired sound mode
Data
on
station/ transmitter identification, traffic
information and a list of alternative frequencies for the
To activate stereo sound
You
OPTIONAL
FM in many countries, where by an
inaudible stream of data is transmitted in addition to the
tion
Sound
(Radio
-
into the
headphone plug ( 3.5mm)
headphone jack.
speakers are automatically disconnected
you plug in the headphones (not supplied).
The
after RDS indicator appears.
when
Press the RDS to recall the
frequency.
MUTE
Press MUTE to mute your unit.
can mute your unit in order, for
You
the
telephone,
Notes
example,
to
"MUTE" indicator flashes in the
answer
display
window.
l
l
RDS is
only available for FM reception.
(PROGRAM SERVICE) NAME is displayed
automatically when a RDS station is received
The PS
.
UBB/HI-TONE
Press UBB/HI-TONE button to select bass
-
Each you press the button "UBB"
appears in the display window.
Auxiliary
Connect
an
or
or
treble.
"HITONE"
Function
auxiliary
device i.e. TV
or
VCR, via the
Press AUX.
rear
phone
sockets.
Note
You
can
also record from the
Recording
10
mounted AUX
Section.
auxiliary input
source,
see
the radio stations
Presetting
You
can
30 stations for FM and AM. Before
preset
make
Press PRESET DOWN/UP
that you have turned down the
volume to the minimum.
tuning,
sure
Press FUNCTION
TUNER indicator
on
Press TUNER/BAND to select the FM
you want in the display window.
Every time you press BAND, FM and AM
or
changes
frequency
the front
on
indication starts
panel
to change,
then release.
Scanning stops
when the unit tunes in
Tuning
(
preset
)
again
on
the remote control.
The station is stored.
3 to 6 to store other stations.
Repeat steps
To clear all the memorized stations
on
the front
panel
for about two seconds, "CLEAR" appears in the display
window and then press CLEAR, the stations are
cleared.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
Notes
l
PRESET
a
station.
Tuning
(or
to select the
Press and hold PROGRAM/MEMORY
Press TUNING DOWN/UP
l
Press PROGRAM
-
AM
alternately.
until the
control)
number you want.
repeatedly to appear
(or TUNER/BAND on the
control).
remote
the remote
a
in
automatically
Press TUNING DOWN/UP for
in
more
than 0.5 seconds.
manually
Press TUNING DOWN/UP
preset number will flash. To change the preset number,
steps 5-6.
follow the
and
briefly
repeatedly.
To recall
presets
Press and hold PRESET DOWN/UP
Press PROGRAM/MEMORY
A
on
the front
panel.
preset number will flash in the display window.
Listening
(or
on
(or PRESET
control) until the desired preset
press it repeatedly.
the remote
number appears
or
to the radio
Press FUNCTION
indicator
()
repeatedly
TUNER/BAND
control) and select the
the display window.
FM
to appear TUNER
the remote
on
or
AM you want in
To turn off the radio
Press POWER to turn the unit off
function mode
The last received station is tuned in.
TAPE
(CD,
For your reference
If an FM program is
?
Press PRESET DOWN/UP
on
the remote
(or PRESET (
)
control) repeatedly to select the
preset station you
Press MODE/RIF
DOWN/UP
(
)
want.
Use manual
?
For automatic
DOWN/UP
or
on
?
VOLUME
by pressing
the front panel or VOLUME
the remote control repeatedly.
non-preset radio stations
?
noisy
"STEREO" disappears
that
stereo
in
effect,
MODE/RIF
To
improve reception
Reposition the supplied
antennas.
on
on
To listen to
select another
display window. There will be no
but the reception will improve. Press
again to restore the stereo effect.
Each time you press the button, the unit tunes in
one preset station at a time.
Adjust
or
AUX).
the
-
the volume
so
or
automatic
tuning
tuning, press and
the front panel.
in
step
Notes
l
2.
Use MODE/RIF
function to
switch to
is distorted
by
hold TUNING
l
mono
(Radio Interference Filter)
reception if stereo reception
noise.
When
recording
noises may
the
occur.
MW(AM)
or
LW broadcast, beat
If it does, press MODE/RIF
once.
11
OPERATION
Tape Playback
Basic
To Pause
Playback
Press FUNCTION
repeatedly
to appear TAPE
cassette deck
by pushing
STOP/EJECT
To
Play
After
) button.
(
( ) during playback.
again it to resume play.
Press this button
indicator.
Open
Play
Press PAUSE
on
Insert a cassette with the tape side to the
bottom and then close deck.
Fast Rewind
To
(
Fast Forward
pressing
panel during playback
the front
or
/
(
stopping.
)
AUTO STOP DECK
After auto
Press PLAY
or
REWIND/FAST FORWARD
deck
stop
automatically.
).
plays only
front side, the unit
stops
Stop Play
Press STOP/EJECT
(
) during playback.
Recording
Wind the
Basic
tape
to the
point recording
(Use only
normal
TUNER
Open
tapes.)
To pause
Setting
Press FUNCTION
or
starts.
repeatedly
to appear the CD
indicator.
l
the cassette deck and insert
cassette into the cassette
a
blank
Recording
from Radio, CD
or
Auxiliary
CD to
( )
during recording.
button
again
to
resume
recording.
(
).
Tape Synchronized Recording
a
complete
and
a
cassette.
synchro recording function dubs
programmed titles automatically into
When you select CD
then press RECORD
(
CD
function, press RECORD
) button.
"REC" appears and
display window.
For your reference
When you press RECORD ( ) button,
button is pressed automatically.
button
The CD
Press FUNCTION button to select desired
recording source, and
( ) button.
The recording begins.
)
stop recording
Press STOP
source
(
Press PAUSE
To
compartment.
recording
Press PAUSE
""
displays
in the
The
PLAY(
synchronized recording is started
automatically after about 8 seconds.
)
Notes
l
If you wish to record from the desired track, select the
desired track with CD SKIP/SEARCH
/
)
before
commencing
CD
(
synchro
recording.
l
12
The function
change
is not
possible during recording.
CD
Playback
Basic
To
Playback
Press FUNCTION
repeatedly
To
to appear CD
no
disc is loaded then "NO DISC" is
displayed.
-
disc
(
)
and
the disc into the
place
tray.
all tracks
play
an
it onto the inner circle
-
of the tray.
Press CD OPEN
(
)
to close the disc
compartment.
"Repeat
once more
indicator"
To
Program Play
You
can
arrange the order of the tracks
own program. The program
)orCDPLAY/PAUSE(
)
Press PROGRAM/MEMORY
the remote
Play
Press CD PAUSE
on
the remote
) or CD PLAY/ PAUSE (
control during playback.
Press this button
To
To
?
?
(CD
again
it to
resume
Skipping
the remote
the Track
(
midway through
a
track is
pressed again,
button is pressed.
a
) button is
track, the player
Play
Fast Rewind
skipped
each time the
(or
PROGRAM
on
the stop mode.
(or
)
PROGRAM
on
control).
or
Fast Forward
PLAY( ) (or CD
control).
PLAY/ PAUSE
(
)
the remote
To check program contents
Press PROGRAM/MEMORY
remote
-
pressing CD SKIP/SEARCH (
/
) buttons for more the 2 seconds on the
front panel, then release during playback, press
PLAY (
) at the point you want.
After
on
to
returns to the start of that track. When it is
To
on
1~3.
Press CD
() button
go to the next track.
When the CD SKIP/SEARCH
once
contain up
) during playback.
Press the CD SKIP/SEARCH
pressed
control)
Press PROGRAM/MEMORY
play.
Repeat
STOP(
the discs and
can
Press CD SKIP/SEARCH (
/
buttons to select the track you want.
)
Stop Play
Press CD
on
to 20 tracks.
the remote control.
To Pause
during playback.
disappears.
create your
PressCDPLAY(
on
OPERATION
repeat play
Press REPEAT
8cm(3 inch) disc, put
repeatedly
again during playback.
"REPEAT ALL" appears in the display.
To cancel
To load
during playback.
display.
Press REPEAT
-
Note
repeatedly
once
"REPEAT 1" appears in the
To
Press CD OPEN
track
one
Press REPEAT
indicator.
If
Repeat Play
play
control)
on
the
(or PROGRAM
stop mode.
A track and program number will be
on
the
displayed.
To clear program contents
Press PROGRAM/MEMORY
remote
CLEAR
(or PROGRAM on the
stop mode. And then press
the front panel or STOP(
) on the remote
control)
on
on
the
control.
To add program contents
1.
Press PROGRAM/MEMORY
(or
PROGRAM
the program
mode until "Track Number" blinks.
remote
control) repeatedly
2~5.
on
2.
Repeat
To
modify program
1.
Press the PROGRAM/MEMORY
the remote
2.
want to
control)
modify.
Repeat
2~4.
on
the
stop
contents
to
display
(or
PROGRAM
on
program number you
13
Troubleshooting
Check the
following guide
for the
cause
of
a
?
?
The power cord is disconnected.
The audio cables
connected
?
The unit does not
start
playback.
?
?
?
not
are
No disc
or
?
securely.
source
Plug
the power cord into the wall
securely.
Connect the audio cable into the
or
tape is
placed upside
?
Switch
on
the external
source
equipment.
tape is inserted.
The disc is
service.
jacks securely.
The power of the external
equipment is switched off.
An unplayable disc
inserted.
contacting
Correction
?
outlet
No sound.
before
problem
Cause
Symptom
No power.
possible
down.
?
Insert
a
disc
?
Insert
a
playable
?
or
tape.
disc
or
Place the disc with the
tape.
playback
side down.
?
The disc is not
placed
within the
?
The remote control
?
The disc is
?
The remote control is not
properly.
dirty.
at the remote
does not work
?
sensor
?
pointed
?
of the unit.
The remote control is too far
?
There is
an
obstacle in the
on
path
guide.
Point the remote control at the
sensor
Operate
of the unit.
the remote control
within about 23 ft
?
the disc tray
inside the
Clean the disc.
remote
from the unit.
?
Place the disc
correctly
guide.
(7 m).
Remove the obstacle.
of the remote control and the
unit.
?
The batteries in the remote
control
14
are
exhausted.
?
Replace
ones.
the batteries with
new
Specifications
MODEL
SECTION
Power
[Genral]
Power
[Tuner]
[Amp]
[TAPE]
(MW)
(WxHxD)
161 X 255 X 268mm
18000 Hz
40
Dynamic range
Tuning Range
Intermediate Frequency
60 dB
Signal to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
55/50 dB
-
60 dB
to Noise Ratio
87.5
108.0 MHz
-
60
74
MHz,
87.5
-
108.0 MHz
450 kHz
0.5%
Frequency Response
Signal-to-noise ratio
Tape Speed
60
4.75cm/sec
Wow Flutter
0.25%
F.F/REW Time
120sec
Frequency Response
250
100
1800 Hz
-
5W+5W
20000 Hz
-
60 dB
to Noise Ratio
-
(MTT -111, JIS-WTD)
(C-60)
8000Hz
43dB
Separation
50dB(P/B)/45dB(R/P)
55dB (MTT-5511)
Erase Ratio
Model
FE-163E
1
Way
1
Type
Impedance
Frequency Response
4Ω
Sound Pressure Level
86 dB/W
Rated
Input Power
Max. Input Power
Net Dimensions (WxHxD)
5W
Net
1.52kg
80
Weight (1EA)
specifications
-
522-1611kHzor530-1610kHz
T.H.D
and
65
10000 Hz
-
35 dB
Designs
or
10.7 MHz
Signal
Frequency Response
Output Power
Channel
[Speakrs]
of the unit.
20W
Frequency response
Signal-to-noise ratio
Signal
panel
3.44kg
External dimensions
FM
AM
Refer to the back
supply
consumption
Mass
[CD]
FFH-163A/AD/AX FFH-164A/AD/AX FFH-165A/AD/AX
are
-
FE-164E
FE-165E
Speaker
20000 Hz
(1m)
10W
150x255x175mm
subject
to
change
without notice.
15
REF NC
P/NO :3828R-A059Y
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement