LG DVD5064 User guide

DV5612E4_ENG
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DVD5064
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Precautions
Safety
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
a
risk of electric
shock to persons.
The exclamation mark within
is intended to alert the
important operating
an
equilateral triangle
to the presence of
user
and maintenance
(servicing)
accompanying the
instructions in the literature
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CLASS 1
KLASSE 1
LASER PRODUCT
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT
LASER
CAUTION:
This
To
Digital
ensure
Video Disc
proper
manual
use
Player employs
of this
carefully
require maintenance, contact
see service procedure.
Use of
controls, adjustments
specified
Laser
product, please
and retain for future
other than those
a
an
or
System.
read this
owner 's
reference, should the unit
authorized service location-
the
performance
of
procedures
herein may result in hazardous
radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water dripping or splashing and that no objects filled with liquids, such as
vases, shall be
This
placed
on
product
the
apparatus.
is manufactured to
the radio interference
DIRECTIVE
73/23/EEC.
comply with
requirements of EEC
89/336/EEC,
93/68/EEC and
Notes
copyrights:
by
law to copy, broadcast, show, broadcast
via cable,
play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, the picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
2
on
It is forbidden
___________________________________
___________________________________
to
Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDisc............................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.18
.18
Pause.............................18
MovingtoanotherTrack...............18
RepeatTrack/All/Off...................18
Search.............................18
Random...........................18
RepeatA-B.........................18
3DSurround........................18
.
RemoteControl............................7
RearPanel................................8
.18
ChangingtheAudioChannel.
ProgrammedPlayback.....................19
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
andMP3Disc..........................19
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation..........................11
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
12
Using your DVD player very first time.
12
Initial Settings General Operation.
Language..........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................12
Sound.............................13
Others(DRC/Vocal/PBC)...............13
ParentalControl......................14
Operation
.15-16
OperationwithDVDandVideoCD.
PlayingaDVD..........................15
.
.
.
.
.
.
MovingtoanotherTITLE...............15
.15
MovingtoanotherCHAPTER.
.
.
.
.
.
ProgrammedPlaybackwithVideoCD.
RepeatProgrammedTracks
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.19
.19
.19
.19
AdditionalInformation.....................20
LastConditionMemory...................20
ScreenSaver...........................20
VideoModeSetting......................20
NotesonMP3Discs.....................20
ControllingtheTV.......................21
Reference
Troubleshooting..........................22
LanguageCodeList.......................23
CountryCodeList.........................24
Specification.............................25
.
GeneralFeatures........................15
.
.
.
.
SlowMotion.........................15
Still Picture and
OperationwithAudioCDandMP3Disc.
PlayinganAudioCDandMP3Disc.
Frame-by-Frame Playback
.
16
About the
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
Search.............................16
Random...........................16
symbols
and hints for
features of this unit.
making
the task easier.
Repeat............................16
RepeatA-B.........................16
TimeSearch........................16
Zoom..............................16
3DSurround........................17
MarkerSearch.......................17
SpecialDVDFeatures....................17
TitleMenu..........................17
DiscMenu..........................17
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.
.
.
.
.
.
.
.
.
Subtitles...........................17
3
INTRODUC
Before Use
Playable
Discs
Note
on
DTS-encoded CDs
To avoid
possible damage to the audio system, turn
down the volume before playing back such discs, adjust
the volume gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel DTS Digital SurroundTM decoder system must
be connected to the digital output of the unit.
DVD
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In
addition, this unit
can
contains audio titles
or
play
a
CD-R
or
Disc-related terms
CD-RW that
Title
(DVD only)
The main film content
MP3 files.
or
accompanying
feature content
additional feature content, or music album.
Each title is assigned a title reference number
or
you to locate it
enabling
easily.
Notes
--
Depending
ment
or
on
the conditions of the
the CD-R/RW disc
discs cannot be
--
The unit cannot
no
data,
or
itself,
recording equip-
some
played on the unit.
play the CD-R/RW
CD-R/RW
--
discs that contain
contain different kinds of formatted data
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
(the
use irregular shaped CDs (e.g., heart-shaped
octagonal). It may result in malfunctions.
Track
Sections of
DVDs
playback operations of DVDs may be intentionalby software manufacturers. As this unit plays
DVDs according to disc content designed by the software manufacturer, some playback features of the unit
fixed
may not be available, or other functions may be added.
Refer also to the instructions supplied with the DVDs.
Some DVDs made for business purposes may not be
played on the unit.
This DVD
code of the DVD
player
and DVDs
player is designed and manufactured
for playback of region "2" encoded DVD soft2
ware. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "2" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
4
(Video
a
are
smaller
CD and audio CD
picture
or a
only)
piece
assigned
musical
audio CD. Each track is
enabling
Some
Regional
that
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
or an
ly
piece
is
chapter
Do not
on
musical
A title is
or
Notes
or a
than titles.
other than MP3 and CD-DA data.
--
Chapter (DVD only)
Sections of a picture
on a
a
video CD
track
number,
you to locate the track you want.
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
Before Use
(Cont'd)
Storing
Precautions
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
the unit
setting
picture and
The
sound of
nearby TV, VCR, or radio
during playback. In this case, position
a
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
such
as
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
To clean the cabinet
soft, dry cloth. If the surfaces
soft cloth
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
the unit
Cleaning
a
discs
insecticide spray,
the unit. Do not leave rubber of
use a
Cleaning
temperature
the surface clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
strong solvents,
as
these
a
extremely dirty,
detergent
mild
such
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
vinyl.
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
MP3
Audio CDs.
MP3 disc.
5
INTRODUC
Front Panel and
Display
Window
Standby indicator
Lights red when the player
is in Standby mode (off).
POWER
(
Switches the
)
player
(T /R)
chapter/track.
Forward SKIP/SCAN
Go to NEXT
Press and hold for two seconds for
fast forward search.
a
Reverse SKIP/SCAN
ON and OFF.
Go to
beginning
of current
chapter/track
or
(
Q / S
)
to PREVIOUS
chapter/track.
Press and hold for two seconds for
a
fast
reverse
search.
STOP(9)
Stops playback.
Pause
PAUSE/STEP ( ; )
playback temporarily / press repeatedly
for frame-by-frame playback.
PLAY(2)
playback.
Starts
Disc
Insert
a
Tray
disc here.
Display
Opens
DVD
(
closes the disc
tray.
Point the DVD
Player
remote control here.
Indicates current title number
CHP/TRK
DVD inserted
)
Remote Sensor
player.
TITLE
/
OPEN/CLOSE
window
Shows the current status of the
ANGLE active
or
Indicates current
chapter
or
track number
CD Audio CD inserted
Indicates total
VCD Video CD inserted
MP3
elapsed
MP3 disc inserted
playing
time/
time
PROG.
Programmed playback
RANDOM
playback
Indicates current
player function:
Playback, Pause,
RANDOM
active
Indicates
mode
etc.
MP3 VCD
6
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
active
AB
repeat
Remote Control
DVD/TV select buttons
Selects
OPEN/CLOSE
mode of remote
operational
control
(see
page
Open
21).
Player
-
POWER
OPEN/CLOSE
-
DVD
DISPLAY
1
2
Select
-
RETURN/TV AV
an
item in the
PR./CH
-
TV AV
SELECT
menu
-
-
Select channel of TV and
changes
VOL
MENU
-
SLOW PAUSE/STEP STOP
PLAY
ReverseSLOW(,)?
playback.
)
PROGRAM
?
?
STOP(9)?
Stops playback.
?
ForwardSLOW(.)?
Forward slow playback.
REPEAT
A-B
MARKER
SEARCH
-
RANDOM ZOOM
*
SUBTITLE
Selects
a
a
subtitle
DVD
angle
?
if
setup
?
MARKER SEARCH
?
menu.
track number
?
?
?
menu.
Remote control
sensor
and press
tracks in random order.
ZOOM
battery
Detach the
AAA AAA
sensor
sequence.
RANDOM
the remote
from the front of the
all.
A-B
Play
?
the
on
REPEAT
Repeat
Operation Range
(7 m)
a
Repeat chapter, track, title,
?
Point the remote control at the remote
remote
Program
CLEAR
?
the buttons.
Angle:
or removes
menu.
Enlarge
remote
track.
ANGLE
SEARCH
Distance: About 23 ft
or
Press and hold button for about
Accesses
point during playback.
Remote Control
)
Remove
MARKER
Display
S
(
program menu or a mark on the
MARKER SEARCH menu.
SETUP
Mark any
Reverse SKIP/SCAN
language.
camera
or removes
)
chap-
PROGRAM
?
available
Accesses
T
(
two seconds.
a menu.
language (DVD) or
audio channel (CD).
Selects
of the disc
menu
Forward SKIP/SCAN
previous chapter
audio
an
the Title
Search backward* / go to beginning
of current chapter or track or go to
0-9 numerical buttons
an
channel.
input
?PLAY(H)
Starts playback.
AUDIO SUBTITLE ANGLE SETUP
Selects
video CD
a
Search forward* / go to next
ter or track.
CLEAR
playback temporarily / press
repeatedly for frame-by-frame
playback.
AUDIO
Selects AUX A/V
Displays
SKIP/SCAN
Pause
Selects numbered items in
of
if available.
Reverse slow
(
menu.
menu
TITLE
SKIP/SCAN
;
setup
the
SLOW
DVD disc.
PAUSE/STEP
Remove the
Displays
with PBC.
TITLE
PR./CH
MENU
menu on a
ENTER
VOL
volume of TV.
Accesses
selection.
menu
RETURN
(left/right/up/down)
4
3
turn off TV sound.
SELECT/ENTER
TV SOUND/MUTE
DISPLAY
during
playback.
Acknowledges
Display
on-screen
Selects 3D SURROUND
disc
ON and OFF.
This button is not available.
Accesses
tray.
SOUND/MUTE
POWER
Switches DVD
and close the disc
video
image.
installation
battery
control,
cover on
the
rear
of
and insert two R03
(size AAA) batteries
aligned correctly.
with
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
types
of batteries
new
batteries. Never mix different
(standard, alkaline, etc.).
7
INTRODUC
Rear Panel
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
AUDIO OUT
Connect to
*System
Select switch
(Left/Right)
amplifier, receiver
an
or
stereo
system.
DIGITAL
OUT
AUDIO
OUT
COAXIAL
L
R
TO TV
VIDEO
OUT
AC Power Cord
TO TV
Connect to
a
(SCART)
Jack
TV with SCART
jack.
Plug
into the power
source.
VIDEO OUT
Connect to
*
System
You
TV with video
inputs.
Select switch
enjoy
can
a
NTSC
or
PAL discs
by using System
appropriate system.
player is connected with
Select switch to choose the
PAL:
Select when DVD
NTSC:
Select when DVD
PAL-TV.
player
is connected with
player
is connected with
NTSC-TV.
AUTO:
Select when DVD
Multi
?
system TV.
When the selected
coincide with the
picture
?
Set
off.
8
may not be
System
System
Select switch does not
system of your TV, normal color
displayed.
Select switch when the power is turned
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Connections
Tips
Depending
to
on
your TV and other equipment you wish
are various ways you could connect
connect, there
the
Use
player.
only
one
of the connections
described below.
PREATION
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
For better sound
the
AUDIO OUT
of your
reproduction, connect
jacks to the audio in jacks
player's
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
Caution
--
Make
sure
the DVD
Player
is connected
the TV. Tune the TV to the correct video
directly to
input chan-
nel.
--
Do not connect the DVD
Player's AUDIO OUT jack to
jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
the
--
phono
in
system.
Connecting
Make
the
Rear of TV
to a TV
SCART INPUT
of the
following connections, depending
capabilities of your existing equipment.
one
VIDEO
INPUT
AUDIO INPUT
on
L
R
L
Video/Audio connection
1
Connect the VIDEO OUT
the video in
jack
on
jack on
using
the TV
the DVD
Player
to
the video cable
(V).
2
Connect the Left and
the DVD
TV
Right AUDIO OUT jacks of
left/right in jacks on
to the audio
Player
(A) using the
the
C
A
V
audio cables.
SCART connection
Connect the TO TV scart
corresponding
cable (C).
in
jacks
on
jack
on
the TV
the DVD
using
an
Player to the
optional scart
DIGITAL
OUT
AUDIO
OUT
COAXIAL
L
R
TO TV
VIDEO
OUT
Rear of DVD
player
9
Connections
Connecting
to
(Cont'd)
Optional Equipment
Connecting to an amplifier equipped with
channel analog stereo or Dolby Surround
Rear of DVD
player
two
Right AUDIO OUT jacks on the
Player to the audio left and right in jacks on your
amplifier, receiver or stereo system, using the supplied
audio cables (A).
DIGITAL
OUT
AUDIO
OUT
COAXIAL
L
Connect the Left and
DVD
R
TO TV
VIDEO
OUT
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1
X
Connect
one of the DVD Player's DIGITAL AUDIO
jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital (coaxial X) audio cable.
OUT
You will need to activate the
2 (See "Digital
Audio
Output"
player's digital output.
page 13).
on
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
Digital
A
Multi-channel sound
digital multi-channel
quality. For this
connection
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Warning:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Notes
--
If the audio format of the
digital output
does not match
the
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
--
Six Channel
Digital Surround Sound via digital cononly be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
nection
--
A
To
see
Screen
10
can
the audio format of the current DVD in the On-
Display,
press AUDIO.
L
R
AUDIO INPUT
Before
Operation
General
Explanation
Press 1
3
This manual
gives the basic instructions for operating
the DVD Player. Some DVDs require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by the DVD
Player or is not available on the disc.
numbers
The
TV
On-screen
1
2
Repeat
TITLE
can
be displayed on the
changed on the menu.
3 or 4
to select
an
number).
setting
of
an
item.
For
setting
functions,
some
setting.
Feedback Field Icons
Title
Repeat
Track
(non-PBC
Repeat
AB
Repeat
A-B
OFF
Repeat
Off
Resume
during playback.
The selected item will be
title
the
be also be used for
can
All Tracks
NORM.
can
be
change
Repeat Chapter
TRACK
display operation
Press DISPLAY
Press
status
Some items
(e.g.,
Temporary
Display
general playback
screen.
to
press SELECT/ENTER to execute the
CHAPT
On-Screen
or 2
The number buttons
Action
play
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
item.
Notes
highlighted.
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the On-Screen
Display disappears.
on-screen
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
and
1/12
Time search
0:16:57
Audio
language
Digital Audio
Output mode
1
ENG
and
Subtitle
D
6CH
language
OFF
Angle
NORM.
Shows the current chapter number and total number of
and skip to the desired chapter number.
Shows the elapsed playing time,
and search the point by the elapsed time
Shows the current audio soundtrack
chapters,
1/2,or
Numeric, SELECT/ENTER
Numeric, SELECT/ENTER
directly.
language, encoding method
and channel number,
and changes the setting.
1/2
Shows the current subtitles
and changes the setting.
Shows the current sound
and changes the setting.
1/2,or
Numeric, SELECT/ENTER
language,
mode,
1/2
angles,
1/2
1/2
VCD1.1
Items
Track Number
1/3
Time
1/12
Audio Channel
Sound
titles,
to the desired title number.
Shows the current angle number and total number of
and changes the angle number.
1/1
Sound
VCD2.0
skip
Selection Method
0:16:57
1
ENG
D
6CH
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
1 /2,or
Numeric, SELECT/ENTER
Shows the
elapsed playing time (Display only)
--
Shows the audio channel, and
changes the audio channel.
1/2
Shows the current sound
changes the setting.
1/2
mode, and
11
PREATION
Before
Initial
You
can
Operation (Cont'd)
Language
Settings
set your
Personal Preferences
own
on
Disc
the
player.
Language
Select
language
a
DVD
for the disc's
Menu, Audio and
Subtitle.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 23. If you enter the wrong language
Original
Using
your DVD
very first time
player
When you have just connected your DVD player for the
very first time, the first on-screen menu asks which lan-
prefer to use for your DVD player. Select
language using 3/4 buttons then press SELECT/
guage you
Other
:
:
The
To select another
code, press CLEAR.
a
ENTER.
This
operation changes the language
screen displays and setup menu.
used for the
on-
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Spanish
Italian
Aspect
Menu
Chinese
Language
Polish
Audio
Digital
Output
Hungarian
SELECT A LANGUAGE
Russian
Other------------
Others
English
Espanol
Menu
Language
Deutsch
Select
Italiano
you
MOVE---34
Initial
1
a
see
language
Settings
setup
setup
menu.
This is the
menu
EXIT--ENTER
General
Operation
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
menu
appears.
Code
Italian
Aspect
Menu
Press SETUP.
The
for the
when you press SETUP.
Language
Audio
Digital
Output
Others
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Menu
Picture
Spanish
Italian
Aspect
TV
Chinese
Language
Polish
Digital
Audio
Output
Hungarian
DVD
4:3 Letterbox: Select when
Russian
nected.
Other------------
Others
Aspect
Displays
above and below the
2
screen
selected
3
4
will show the current
item,
as
well
as
for the
setting
setting(s).
alternate
While the desired item is
selected, press 2, then
3/4 to select the desired
setting.
Press SELECT/ENTER to confirm your
selection.
Some items
require
additional
Press SETUP, RETURN
5 setup
menu.
steps.
PLAY to exit the
Either
16:9 Wide: Select when
a
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Code
Aspect
Menu
Language
Digital
Audio
your TV
con-
bars
conscreen.
16:9 wide TV is connected.
Disc Audio
Country
masking
standard 4:3 TV is
Displays pictures cropped to fill
sides of the picture are cut off.
Others
12
a
with
nected.
TV
or
standard 4:3 TV is
images
picture.
4:3 Panscan: Select when
Press 3/4 to select the desired item.
The
a
theatrical
Output
Before
Operation (Cont'd)
Sound
Others
Audio
Digital
Output
Each DVD disc has
The
Set the
variety
output options.
player's Digital Audio Output according to the
type of audio system you
DRC, Vocal and PBC settings
changed
use.
DOLBY
DIGITAL
Disc Audio
DRC On
Disc Subtitle
Stream/PCM
Disc Subtitle
Vocal On
Disc Menu
PCM
Disc Menu
PBC On
/PCM
Rating
Code
Language
Audio
Country
Sample Freq.
Aspect
Digital
48 KHz
TV
96KHz
Menu
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equip-
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
decoder
or
with
a
DTS
decoder, Dolby Digital
The DVD
a
the
Sample Frequency
To
Sample Frequency setting, first select
Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the desired
Output
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
at
2 channel
digital
player outputs sounds in
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1 or MPEG2
recording system.
amplifier.
Audio
Dynamic Range Control (DRC)
and the
MPEG decoder.
PCM: Select when connected to
stereo
Language
Others
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
a
PREATION
Code
Aspect
Digital
Output
Others
ment with
changed.
Rating
Country
Menu
be
between On and Off.
Disc Audio
TV
can
Press 3/4 to select the desired item and press
SELECT/ENTER. The setting of the selected item is
of audio
a
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
mix into
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
the
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
13
Before
Operation (Cont'd)
Parental Control
Rating
Movies
DVDs may contain
on
scenes
not suitable for
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
applies
scenes on
to the
complete
the disc. These
disc
or
scenes are
to
with alternative
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
Menu
3
2
Language
Country
Audio
Output
Unlock
Change
Others
1
Select
2
While
3
When you have not entered a password yet;
Enter a 4-digit password using the numerical but-
"Rating"
on
the
Setup menuusing
the
3/4 buttons.
tons to create
a
1
Select
2
While
3
Follow
4
Select the first character
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
er,
be
Unlock, Parental Control is
in full.
an
alternative
scene
is available
The alternative must have the
lower
one.
If
no
a
same
on
rating
the disc.
or a
suitable alternative is found,
play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
Press SELECT/ENTER to confirm your
5 selection, then press
SETUP to exit the
below
using
the 3/4 buttons.
3/4 buttons.
is necessary when
the 4-digit code"
).
the
2
Enter the old
3
Select
Steps
4-digit
1-2
as
code
shown above to the left
(Rating).
code, then press SELECT/ENTER.
Change using
the 3/4 buttons then press
SELECT/ENTER.
4
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
Enter
If you
If you
menu.
forget your 4-digit
forget
your
time and veri-
password,
code
to clear the current pass-
word, follow the procedure below.
1
2
Press SETUP to
display
the
setup
menu.
Use the Number buttons to enter the
6-digit
number
"210499."
rating
The
is cleared. "P CLr" appears on the disThe message will appear if the disc tray is closed. It
will be on the display until you try another feature.
menu.
4-digit password
play.
3
Enter
a new
(Rating).
14
left.
4-digit password
changed (see "Changing
Follow
1 to 8: Some discs contain scenes not
rating for the playall disc scenes with the same rating or lower will
played. Higher rated scenes will not be played
unless
on
1/2 buttons and select
cursor
1
a
Ratings
step 3 of "Rating"
Note
Changing
personal 4-digit security
suitable for children. If you set
Code is selected, press 2.
Confirmation of the
buttons to confirm the
then press SELECT/ENTER.
on
menu.
on
play
the 3/4 buttons
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
When you have already entered a password;
Enter a 4-digit password using the numerical
Unlock: If you select
using
menu.
Country
fy.
not active. The disc will
Code
Country
the setup
6
personal 4-digit security password,
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
4
Output
Others
the code is
Select
Audio
using
5 the second character
using
is selected, press 2.
then press SELECT/ENTER. And enter the 4-digit
password again and press SELECT/ENTER to veri-
password,
Language
Digital
Shift the
"Rating"
Code
Aspect
Menu
1
Digital
SE
Rating
TV
scenes.
4
Aspect
Code Set
Disc Menu
5
Country
TV
Code
were
to the list
List", page 24.).
Disc Subtitle
rated
whose standards
disc, referring
Disc Audio
try dependent. The Parental Control feature allows you
to prevent discs from being played by your children or
played
country/area
Code
(See "Country
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are coun-
to have certain discs
a
used to rate the DVD video
code
as
shown above to the left
with DVD and Video CD
Operation
Playing
a
Getting
Turn
on
to
General Features
DVD
play
VCD2.0
DVD
nected to the DVD
Note
VCD1.1
the TV and select the video
input
source con-
input
player.
source
stated, all operations described
remote control
connected to the DVD
the
using
When you want to enjoy the sound of discs or from
the audio system, turn on the audio system and
select the
Unless
setup
Moving
player.
Some
use.
operations
are
based
on
be carried out
can
menu.
to another TITLE
DVD
1/3
1
Press OPEN/CLOSE to open the disc tray.
When
Load your chosen disc in the tray, with the label
2 facing
up.
double-sided DVD is inserted, make
the side you want to play is facing up.
When
3
a
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
starts
automatically.
If
playback
press PLAY.
In some cases, the disc
playback
DVD
appear
menu screen
is
When
displayed
may be displayed first after
Video CD which contains a menu.
menu screen
or
Moving
loading
a
DVD
Use the 1 2
4
buttons to select the
as
one
title, you
can move
to
follows:
playback
is
stopped, then
(0-9) to select
title/chapter
to another CHAPTER
1/12
VCD1.1
a
title
can move
When the
DVD
another title
than
more
Press DISPLAY when
instead.
The
disc has
press the appropriate numerical button
a title number.
sure
does not start,
might
menu
a
on a
1/3
disc has
to another
more
chapter
as
than
one
chapter,
you
follows:
Press SKIP/SCAN . or > briefly during
playback to select the next chapter or to return to the
beginning of the current chapter.
Press . twice briefly to step back to the previous
chapter.
To go directly to any chapter during DVD playback,
you want to view, then press SELECT/ENTER to start
press DISPLAY. Then, press 3/4 to select C
(chapter). Then, enter the chapter number using the
playback.
numerical buttons
Press TITLE
3
or
MENU to return to the
Note
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
the
operating procedures for
depending on the disc.
menu
menu screen.
You also may set PBC to Off under
13.
setup. See page
rapid
succession.
Slow Motion
1 Press SLOW t
The
player
DVD
T
or
VCD2.0
VCD1.1
during playback.
will enter SLOW mode.
2 Use the SLOW t
or
T to select the
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
T
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental
--
press the buttons in
two-digit numbers,
t
Notes
--
For
menu screen.
and the exact
using
may differ
Follow the instructions on the each
--
(0-9).
menu screen.
Control",
DVDs may have a
player will not
Your
different from your
player is 2 (two).
(see
page 14).
region code.
on
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
play discs that have a region code
player. The region code for this
15
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
2 You
can
Frame-by-frame playback
On
go into PAUSE mode.
advance the picture frame by frame
pressing
now
PAUSE
Search
repeatedly
VCD2.0
DVD
during playback.
The
now
will
MX100
> for about
or
To
Video
the Search
or
speed changes: mX2,
on
the TV
a
third time.
screen.
use
PBC, you
the
must set PBC to Off
Repeat
on
the
function. See page 13.
A-B
AB
repeat
VCD2.0
DVD
OFF
sequence in
a
VCD1.1
title:
a
A- appears
briefly
2 Press A-B
again
the TV
on
starting point.
screen.
at your chosen end
point.
A-B appears
briefly on the TV screen, and the repeat
begins(a-b repeat appears on the player's dis-
sequence
play).
3 To cancel the sequence, press A-B.
MX2, MX4, MX8
or
to
menu
1 Press A-B at your chosen
>
repeatedly
required speed: mX2, mX4, mX16,
(backward) or MX2, MX4, MX16,
(forward).
CD,
mX4, mX8 (backward)
a
Video CD with
A*
to select the
With
Repeat
Repeat
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
mX100
press REPEAT
Off icon appears
by
VCD1.1
two seconds
a
setup
the remote control.
on
1 Press and hold SKIP/SCAN .
player
Repeat mode,
Note
during playback.
will
player
The
VCD1.1
1 Press PAUSE
The
3 To exit
(cont'd)
(forward).
3 To exit SEARCH
Random
mode, press PLAY.
Karaoke DVD
Time Search
VCD1.1
1 Press RANDOM
during playback or in stop mode.
The unit automatically begins Random Playback and
RANDOM appears on the display window.
2 To return to normal
playback, press RANDOM
disappears on the display window.
RANDOM
1 Press DISPLAY
play
appears
3 Within 10
the
seconds,
required
4 Within 10
CHAPT
Playback
DVD Video Discs
repeat
the
ALL
OFF
enter
2 To
-
currently playing chapter,
icon appears
on
the TV
The
a
1 To
Title icon appears
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
Repeat
repeat
screen.
Track icon appears
the disc
16
Repeat
starts from the selected time
invalid
sec-
to confirm
on
the disc. If you
time, playback will continue from the
current
DVD
during playback
2 Use the 1/2/3/4 buttons to
Track/All/Off
Repeat
or
still
playback
to acti-
on
the TV
currently playing,
All icon appears
on
the TV
the
magnification
move
through
level
the
picture.
3 Press CLEAR to
resume
normal
playback
or
return to
paused image.
screen.
press REPEAT
second time.
The
hours, minutes and
in the box.
If you press ZOOM repeatedly, the
increases up to six times.
third time.
repeat the track currently playing, press REPEAT.
The
2 To
-
right
seconds, press SELECT/ENTER
1 Press ZOOM
zoomed
Video CDs
the numerical buttons to enter
vate the Zoom function.
Repeat mode,
Repeat
use
start time. Enter
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
screen.
repeat the title currently playing, press REPEAT
Repeat
an
Zoom
press
second time.
The
to select the Time
display.
on-screen
Repeat Chapter/Title/Off
Repeat Chapter
3 To exit
time of the
point.
REPEAT.
The
elapsed playing
the start time.
VCD1.1
TRACK
TITLE
dis-
screen.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
video CD without PBC.
VCD2.0
on-screen
at
The "-:--:--" appears in the Time Search box.
works with DVD Karaoke discs and
DVD
the
seconds, press 3/4
onds from left to
Repeat
The
during playback.
Search icon in the
Note
1 To
on
playing
current disc.
2 Within 10
only
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
The Time Search box shows the
until
Tips
By pressing SKIP/SCAN . or > during Random
playback, the unit selects another title (track) and
resumes Random playback.
This function
0:16:57
DVD
a
Note
The
screen.
The
function may not work for some DVDs.
function may not work on multi-angle scenes.
zoom
zoom
Operation
with DVD and Video CD
General Features
3D Surround
This unit
can
NORM.
DVD
produce
a
two
conventional stereo
playback from
speakers, instead of the
speakers normally required to listen to
five
more
channel audio from
a
home theater
again
DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then,
press the appropriate numerical button to select an
or
multi-
system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
discs: Menus
effect, which
simulates multi-channel audio
DVD
the contents of DVD Video
Checking
3D SUR
3D Surround
DVD Features
Special
(cont'd)
during playback.
item. Or, use the 1/2/3/4 buttons to highlight your
selection, then press SELECT/ENTER.
effect, press SOUND
DVD
Title Menu
to select "NORM".
1 Press TITLE.
Marker Search
VCD2.0
DVD
VCD1.1
If the current title has
a
menu, the
Otherwise, the disc
screen.
MARKER SEARCH
menu
menu
will appear
the
on
may appear.
1/9
2 The
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
3 To
be memorized.
can
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
again.
mark, follow these steps.
a
1 Press MENU.
memorize.
Repeat step
on
the TV
The disc
briefly.
screen
1 to enter up to nine Marker
DVD
Disc Menu
During disc playback, press MARKER when
playback reaches the spot that you want to
The Marker icon will appear
2
list
menu can
and subtitle
to
points
on a
2 To
is
menu
displayed.
the disc menu, press MENU
remove
again.
disc.
To Recall
1
a
disc
During
Camera
Marked Scene
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
seconds, press 1/2 to select
ber that you want to recall.
a
the
screen.
Marker
num-
4 To
remove
then
the
camera angle if you wish.
repeatedly during playback to
change
Press ANGLE
desired
select
a
angle.
The number of the current
will start from the Marked
1/1
If the disc contains sequences recorded from different
angles, the angle icon blinks on the display. You
3 Press SELECT/ENTER.
Playback
DVD
camera
can
2 Within 10
Angle
angle
appears
on
the
display.
scene.
the MARKER SEARCH menu, press
SEARCH.
Changing
1
the Audio
Language
DVD
ENG
D
6CH
To clear
1
a
During
Marked Scene
disc
playback,
The MARKER SEARCH
2
menu
will appear
on
the
ferent audio
screen.
repeatedly during playback
language or audio track.
Subtitles
erase.
Press CLEAR.
The Marker number will be erased from the list.
DVD
Repeat steps
2 and 3 to
erase
1
a
dif-
ENG
Press SUBTITLE
different subtitle
4
to hear
Press 1/2 to select the Marker number that you want
to
3
Press AUDIO
press SEARCH.
additional Marker
repeatedly during playback
languages.
to
see
the
numbers.
5
To
remove
SEARCH.
Note
the MARKER SEARCH menu, press
If
appears, the feature is not available
on
the disc.
17
OPERATION
with Audio CD and MP3 Disc
Operation
Playing
an
The DVD
Player
CD-ROM,
CD-R
Before
Audio CD and MP3 disc
MP3 format
recordings
on
recordings,
read the notes of MP3
page 20.
CD
1 Press and hold SKIP/SCAN .
CD-RW discs.
or
MP3
playing
Recordings on
play
can
Search
two seconds
during playback.
The
now
player
will
> for about
or
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
>
or
repeatedly
to select the
Insert
1
The
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
disc and close the tray.
appears on the TV screen.
a
menu
CD
3 Search
MP3
Program
speed
Program
TRACK 1
TRACK 1.MP3
TRACK 2
TRACK 2.MP3
TRACK 3
TRACK 3.MP3
TRACK 4
TRACK 4.MP3
TRACK 5
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
and direction
are
indicated
on
the
menu screen.
4 To exit SEARCH
mode, press PLAY.
TRACK 7.MP3
TRACK 7
Clear All
TRACK 8
STER.
0:56:35
Audio CD
Clear All
TRACK 8.MP3
56:35
NORM.
MP3
menu
Random
OFF
1
CD
1 Press RANDOM
menu
during playback
or
when
playback
is
stopped.
Press 3/4 to select
2 Playback
a
During playback,
To
the current track's
stop playback
Pause
and
elapsed playing
2 To return to
during playback.
playback,
1
press PLAY
press PAUSE
or
repeat
A-B
a
to another Track
Press SKIP/SCAN .
or
>
playback to go to the next track
beginning of the current track.
Press SKIP/SCAN . twice
the
In
previous
case
The
MP3
CD
to return to the
or
briefly
step
the track number
to go
using
to any
directly
track,
the numerical buttons
(0-9)
1 To
repeat
The
2 To
a
the track
Repeat
currently playing,
Track icon appears
on
the
MP3
press REPEAT.
menu screen.
repeat all tracks of disc in the unit, press REPEAT
second time.
The
Repeat
3 To exit
The
ALL icon appears
Repeat mode,
Repeat
Repeat
Repeat
This unit
on
the
begins
OFF icon appears
on
the
a
menu screen.
play repeatedly.
on
the
play,
press
menu screen.
third time.
menu screen.
CD
can
produce
a
3D Surround
effect, which
playback
conventional stereo
instead of the five
speakers,
speakers normally required
channel audio from
a
home theater
2 To turn off the 3D Surround
again
from two
or
to listen to multi-
system.
1 Press SOUND to select "3D SUR"
during playback.
effect, press SOUND
to select "NORM".
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STEREO, LEFT or RIGHT).
ferent audio channel
18
to
icon and "OFF" appears
menu screen.
press REPEAT
the
on
simulates multi-channel audio
more
CD
appears
at your chosen end point.
icon and "A B" appears on the menu screen,
enter
during playback.
Repeat TRACK/ALL/OFF
-"
again
3D Surround
CD,
press A-B at your chosen start-
back to
track.
of audio
CD
3 To exit the sequence and return to normal
A-B again.
The
to
menu screen.
icon and "A
Repeat
and the sequence
briefly during
press RANDOM repeat"RAND." disappears on the
or
sequence.
2 Press A-B
Moving
Playback and
display window
playback,
During disc playback,
ing point.
The
again.
the
on
menu screen.
Repeat
To
1 Press PAUSE
Random
"RAND." appears
edly until RANDOM
display window and
time, press STOP.
at any other
or
2 To return to normal
MP3
CD
automatically begins
RANDOM
time will appear on the display.
Playback will stop at the end of the disc.
3
The unit
track then press PLAY.
starts.
CD
dif-
Programmed Playback
Programmed Playback
MP3
CD
with Audio CD
VCD2.0
Note
Program allows you to store your favorite
particular disc in the player memory.
contain 32 tracks
tracks for
On
a
The
(Audio CD)
or
is
displayed
on
the TV
2
screen.
during playback or in
the Program Edit mode.
mode to enter
E
The
the
will appear to the right of the word
side of the menu screen.
right
menu
to
use
PBC, you
the
must set PBC to Off
on
the
function. See page 13.
Program
OPERATION
Insert Video CD and close the tray.
1
menu
Video CD with
60 tracks
Press PROGRAM
2
a
setup
Insert the disc and close the tray.
1
with Video CD
Programmed Playback
and MP3 Disc
Program can
(MP3 disc).
VCD1.1
Press PROGRAM while
The VCD
Program
the stop
menu
playback
is
stopped.
will appear.
VCD
Program
E
TRACK 1
Program
TRACK 2
on
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
Press PROGRAM to exit the
E
mark will
Edit
Program
mode; the
disappear.
Note
Press 3/4 to select
track then press
SELECT/ENTER to place the selected track
3
the
CD
Press PROGRAM to exit the
a
3
to
place
additional tracks
on
Program
TRACK 12
TRACK 1.MP3
TRACK 8.MP3
TRACK 2
TRACK 8
TRACK 2.MP3
TRACK 2.MP3
TRACK 3
TRACK 10
TRACK 3.MP3
TRACK 4.MP3
TRACK 4
TRACK 3
TRACK 4.MP3
TRACK 3.MP3
TRACK 5
E
To
STER.
Audio CD
Clear All
TRACK 8.MP3
NORM.
56:35
track you selected last is
highlighted
on
6 playing.
Press MENU to
7
move
previous
page.
Playback begins in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
played
the
on
Off icon appears
on
the
a
Track from
a
menu screen.
a
third time.
menu screen.
mode to enter the
E
Program
List
during playback or in
Program Edit mode.
the
once.
stop
mark will appear.
2 Press 2 to
move
to the
Program
list.
erase
4 Press CLEAR.
The track will be erased from the
Press PLAY to start.
have
press REPEAT.
menu screen.
3 Use 3/4 to select the track that you wish to
from the Program list.
to the next page.
to the
the
Repeat mode, press REPEAT
Repeat
The
Press 3/4 to select the track you want to start
move
on
menu
the program list.
Press TITLE to
currently playing,
icon appears
1 Press PROGRAM
programmed
Tracks
Track icon appears
Repeat All
The
Press 2.
The
left.
on
repeat all tracks of program list, press REPEAT
Erasing
5
the track
Repeat
To exit
OFF
1
MP3
menu
repeat
The
TRACK 7.MP3
Clear All
0:00:14
steps 3-7 of "Programmed Playback with
second time.
TRACK 6.MP3
TRACK 7
To
The
TRACK 5.MP3
TRACK 6
menu.
the
Program
TRACK 1
TRACK 8
Follow
Audio CD and MP3 Disc"
Repeat Programmed
MP3
E
Program
on
list.
Program
Repeat step 3
Program list.
4
Clear All
TRACK 8
Note
Erasing
the
1 Follow
steps
List"
as
Program
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
To
resume
normal
playback
from
programmed
playback
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is removed.
Press and hold PROGRAM until "PROG." indicator
disappears
in the
display
window.
19
Additional Information
Last Condition
DVD
This
CD
player
Notes
Memory
VCD1.1
on
MP3 Discs
About MP3
memorizes the last condition for the last
An MP3 file is audio data
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
files that have the
the
The
If you load a disc that has its settings memothe latest stop position is automatically recalled.
player.
rized,
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
Video Mode
With certain
or
Setting
DVD
Dot Crawl is shown
interpolation
straight
on
perfectly matched with the disc.
picture quality can be improved
Creator", which
change
the video
7.
Procedure of video mode is
→
MODE2
8.
→
MODE3
→
MODE4
→
MODE5
no
an
ISO9660 file
system.
MP3 files in the first
requires
MP3 file in the 1st
track, it
can-
playback
MP3
use a new
File
using CD-RW discs.
only.
names should be named using 8 letters
must incorporate ".mp3" extension
9.
Please
finished CD-R discs
e.g. "********.MP3".
Do not use special letters such
as
or
less
"_?!><+*}{`[@
etc.
Total number of files
on
the disc should be less than
200.
10. Use 74 minute CD-R discs
minute CD-R
changed;
creates
session disc
MP3 files. If you wish to
format all the data in the disc or
]:;\/.,"
TV
You
is limited
We do not recommend
use
mode, press and hold DISPLAY
video mode number is
player
one.
6.
of the disc.
with this
playback
files,
lines. That
during playback
displayed on the
screen. Check whether video quality is improved.
can repeat above procedure until desired picture
quality appears.
Changed
MODE1
single
and
about 3 seconds
a
A
mode.
To
compatible
track. If there is
In that case, the
with changing video
fake MP3 file that has
5.
VCD1.1
De-interlace is not
a
-
not
or
not read
".mp3".
4.
discs, the playback picture may be flick-
Vertical
file
a
Sampling Frequency / only at 44.1kHz
Bit rate / within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
therefore recommend that you use "Easy-CD
turn itself off.
VCD2.0
MP3 file that has
an
".mp3".
1.
picture
minutes, the DVD Player will automatically
means
can
file extension "MP3 files".
follows:
appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
screen saver
ering
player
MP3 disc
3.
Screen Saver
".mp3"
not read
as
2.
The
can
file extension
Notes
--
player
extension other than
The
--
compressed by using
MPEG1, the audio layer-3 file-coding scheme. We call
(700M)
(650M),
Do not
use
80
software
→
MODE1
If you turn off the the power, the video mode will be
back to initial state (MODE1).
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
of recordable disc formats
MP3
are
optimal
automatically
many different types
CD-R containing
are
(including
files).
Customers should also note that
permission
is
required
in order to download MP3 files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright
20
owner.
Additional Information
Your remote control is
well
as
Before
as
If your LG TV is not
the TV
Controlling
capable
of
operating
your DVD
limited functions of LG TV.
the remote control, press DVD
select the device to be operated.
using
To switch the remote control mode
ent
The
device),
sure
to press DVD
(to operate
or
a
TV to
differ-
TV button first.
or
POWER, PR./CH(3/4), VOL(1/2), MUTE and TV
AV buttons
ling
be
on
remote control
are
To set the remote control Code 2, hold down both the
TV button and "2" number button on the remote control.
(If
the batteries in the remote control
are
while the remote control is set to Code 2, the
will revert Code 1.)
replaced
setting
To set the remote control back to Code 1, hold down
both the TV button and "1" number button on the
remote control.
Notes
If the remote control does not
Remote Control Codes for LG TV
This remote control
supports
two remote control
codes for LG TV: Code 1 and Code2.
When the unit is
set the remote control
activated for control-
LG TV.
Setting
operated,
to Code 2.
shipped
control is set to Code 1.
from the
factory,
the remote
TV, try
one
of the other code
originally supplied with
Due to the variety of
the remote control
the LG TV.
codes used
OUR COMPANY cannot
control will
operate your particular
or use
by manufacturer,
guarantee that the remote
operate every model of the LG TV.
21
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
service.
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
window is
The TV is not set to receive DVD
picture.
signal
output.
No sound.
on
that the DVD or,
the TV
appropriate video input mode
the picture from the DVD
so
the TV
on
appears
screen.
Connect the video cable into the
securely.
securely.
The connected TV power is turned off.
Turn
The
Select the correct
equipment
connected with the
signal output.
The audio cables
are
not connected
input mode of the
you can listen to the
sound from the DVD player.
audio receiver
The power of the equipment connected
with the audio cable is turned off.
Turn
is set to the
the
on
equipment
jacks
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The disc is
so
Connect the audio cable into the
securely.
Digital Audio Output
position.
jacks
the TV.
on
securely.
The
is
display
The video cable is not connected
audio cable is not set to receive DVD
playback picture
(Check
lit.)
Select the
player
The
disc.
a
cord into the wall outlet
audio CD indicator in the
not work.
No
contacting
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
Insert
disc.
a
(Check
that the
DVD,
audio CD indicator in the DVD
or
display
is
lit.)
An
unplayable
disc is inserted.
Insert
playable
a
disc.
(Check
the disc
type, color system and Regional code.)
The disc is
down.
placed upside
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
The remote control is not
does not work
remote
properly.
sensor
Cancel the
pointed
player.
at the
of the DVD
player.
There is
an
obstacle in the
rating
tray correctly
path of the
player.
Rating
function
or
change
level.
Point the remote control at the remote
sensor
The remote control is too far from the
DVD
the disc
Clean the disc.
the
The remote control
on
guide.
of the DVD
Operate the
23ft(7m).
player.
remote control within about
Remove the obstacle.
remote control and the DVD
The batteries in the remote control
exhausted.
22
are
Replace
the batteries with
new ones.
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sudanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Rumanian
8679
Volapuk
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
REF NC
23
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
14).
Code
Country
Code
Country
Code
Country
Code
Country
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SB
Solomon Islands
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SC
Seychelles
AF
ET
Ethiopia
LK
Sri Lanka
SD
Sudan
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SE
Sweden
AI
Anguilla
FJ
Fiji
LS
Lesotho
SG
Singapore
AL
Albania
FK
Falkland Islands
LT
Lithuania
SH
Saint Helena
AM
Armenia
FM
Micronesia
LU
Luxembourg
SI
Slovenia
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
SJ
Svalbard and Jan
AO
Angola
FR
France
LY
Libya
AQ
Antarctica
FX
Morocco
SK
Slovak
Argentina
France (European
Territory)
MA
AR
MC
Monaco
SL
Sierra Leone
AS
American Samoa
GA
Gabon
MD
Moldavia
SM
San Marino
AT
Austria
GB
Great Britain
MG
Madagascar
SN
Senegal
AU
Australia
GD
Grenada
MH
Marshall Islands
SO
Somalia
AW
Aruba
GE
MK
Macedonia
SR
Suriname
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
ST
Saint Tome and
BA
Bosnia-Herzegovina
GH
Ghana
MM
SU
Former USSR
BB
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
El Salvador
BD
Bangladesh
GL
Greenland
MO
Macau
SY
Syria
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
SZ
Swaziland
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TC
Turks and Caicos Islands
BG
Bulgaria
GP
Mauritania
TD
Chad
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MR
BH
MS
Montserrat
TF
BI
Burundi
GR
Greece
MT
Malta
BJ
Benin
GS
S.
BM
Bermuda
BN
Brunei Darussalam
BO
Barbuda
& S. Sandwich
Republic
French Southern
MU
Mauritius
TG
Togo
MV
Maldives
TH
Thailand
GT
Guatemala
MW
Malawi
TJ
Tadjikistan
Bolivia
GU
Guam
MX
Mexico
TK
Tokelau
BR
Brazil
GW
Guinea Bissau
MY
TM
Turkmenistan
BS
Bahamas
GY
MZ
TN
Tunisia
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TO
Tonga
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
BW
Botswana
Islands
NE
BY
Belarus
HN
Honduras
BZ
Belize
HR
Croatia
CA
Canada
HT
CC
Cocos
HU
CF
(Keeling) Islands
Central African Republic
CG
CH
(USA)
Principe
Territories
Isls.
Georgia
Mayen
Islands
TP
East Timor
Niger
TR
Turkey
NF
Norfolk Island
TT
Trinidad and
NG
Nigeria
TV
Tuvalu
Haiti
NI
Nicaragua
TW
Taiwan
Hungary
NL
Netherlands
TZ
Tanzania
ID
Indonesia
NO
Norway
UA
Ukraine
Congo
IE
Ireland
NP
Nepal
UG
Switzerland
IL
Israel
NR
Nauru
UK
Uganda
United Kingdom
Coast
IN
India
NU
Niue
UM
USA Minor
IO
British Indian Ocean
NZ
New Zealand
(French)
Tobago
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
US
United States
CM
Cameroon
IQ
Iraq
PA
Panama
UY
Uruguay
CN
China
IR
Iran
PE
Peru
UZ
Uzbekistan
CO
Colombia
IS
Iceland
PF
VA
Vatican
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
VC
Saint Vincent &
cs
Former Czechoslovakia
JM
Jamaica
PH
Philippines
CU
Cuba
JO
Jordan
PK
Pakistan
VE
Venezuela
CV
Cape
JP
Japan
PL
Poland
VG
Virgin
Islands
(British)
CX
Christmas Island
KE
PM
Saint Pierre and
VI
Virgin
Islands
(USA)
CY
Cyprus
KG
Kenya
Kyrgyzstan
PN
Pitcairn Island
VN
Vietnam
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
VU
Vanuatu
KI
Kiribati
PT
Portugal
WF
Wallis and Futuna Islands
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
WS
Samoa
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YE
Yemen
DM
Dominica
KP
North Korea
QA
Qatar
YT
Mayotte
DO
Dominican
KR
South Korea
RE
Reunion
YU
Yugoslavia
DZ
Algeria
KW
Kuwait
RO
Romania
ZA
South Africa
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZM
Zambia
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZR
Zaire
EG
Egypt
LA
Laos
SA
Saudi Arabia
ZW
Zimbabwe
EH
Western Sahara
LB
Lebanon
DE
24
Verde
Republic
Islands
Anguilla
Outlying
Islands
City
State
Grenadines
Miquelon
(French)
Specification
General
Power
Power
requirements
AC 110-240V
consumption
14W
Dimensions
Mass
,
50/60 Hz
430 X 69 X 245
(approx.)
3.2
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 40˚C
Operating humidity
5%to90%
(41˚F
to
104˚F)
System
Laser
Semiconductor
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
laser, wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
Audio
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (analog audio)
2.0 Vrms
Vp-p
75
ohms, sync negative
(1 KHz,
0
dB),
330 Ω, RCA
jack (L, R)
x
1/SCART(TO TV)
Accessory
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
subject
to
change
without notice.
Manufactured under license from
Confidential
unpublished
"DTS" and "DTS
Digital
works.
Out"
are
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital
Theater
Systems,
of
Dolby
Laboratories.
Inc.
25
P/N: 3834RS0030E