advertisement
▼
Scroll to page 2
of 26
DV5912E4_ENG DVD PLAYER OWNER'S MANUAL MODEL : DVD5094 Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely. Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead within symbol is intended to alert the user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark within is intended to alert the important operating user an equilateral triangle to the presence of and maintenance (servicing) accompanying the instructions in the literature product. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER CAUTION: This To Digital ensure Video Disc proper use Player employs of this a Laser product, please System. read this owner's manual carefully and retain for future reference, should the unit require maintenance, contact an authorized service locationsee service procedure. Use of controls, adjustments other than those specified or the performance of procedures herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The ping or vases, apparatus shall not be exposed to water dripsplashing and that no objects filled with liquids, such as shall be placed on the apparatus. This product is manufactured to the radio interference DIRECTIVE 73/23/EEC. comply with requirements of EEC 89/336/EEC, 93/68/EEC and Notes copyrights: by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, the picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is found on the back of this unit. This number is unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. 2 on It is forbidden ___________________________________ ___________________________________ to Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDisc............................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . . . . . . . . . . . . . . .18 .18 Pause.............................18 MovingtoanotherTrack................18 RepeatTrack/All/Off...................18 Search.............................18 Random...........................18 RepeatA-B.........................18 3DSurround........................18 . RemoteControl............................7 RearPanel................................8 .18 ChangingtheAudioChannel. ProgrammedPlayback.....................19 Programmed Playback with Audio CD . . . . . . . . . . andMP3Disc..........................19 Preparation Connections............................9-10 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. BeforeOperation..........................11 GeneralExplanation......................11 On-ScreenDisplay.......................11 InitialSettings........................12-14 .12 UsingyourDVDplayerveryfirsttime. 12 Initial Settings General Operation Language..........................12 . . . . . . . . . . . . . . . . . . . . . . Picture.............................12 Sound.............................13 Others(DRC/Vocal/PBC)...............13 ParentalControl......................14 Operation .15-16 OperationwithDVDandVideoCD. PlayingaDVD..........................15 . . . . . . . MovingtoanotherTITLE...............15 .15 MovingtoanotherCHAPTER. . . . . . ProgrammedPlaybackwithVideoCD RepeatProgrammedTracks. ErasingaTrackfromProgramList. ErasingtheCompleteProgramList. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 .19 .19 .19 AdditionalInformation......................20 LastConditionMemory...................20 ScreenSaver...........................20 VideoModeSetting......................20 NotesonMP3Discs.....................20 ControllingtheTV.......................21 Reference Troubleshooting..........................22 LanguageCodeList.......................23 CountryCodeList.........................24 Specification.............................25 . GeneralFeatures........................15 . . . . SlowMotion.........................15 Still Picture and OperationwithAudioCDandMP3Disc. PlayinganAudioCDandMP3Disc. Frame-by-Frame Playback . 16 About the Indicates hazards itself or for instructions likely to cause damage. harm to the unit other material Indicates special operating Indicates tips Search.............................16 Random...........................16 symbols and hints for features of this unit. making the task easier. Repeat............................16 RepeatA-B.........................16 TimeSearch........................16 Zoom..............................16 3DSurround........................17 MarkerSearch.......................17 SpecialDVDFeatures....................17 TitleMenu..........................17 DiscMenu..........................17 CameraAngle.......................17 .17 ChangingtheAudioLanguage. . . . . . . . . . Subtitles...........................17 3 INTRODUC Before Use Playable Discs Note on DTS-encoded CDs To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit. DVD (8cm/12cmdisc) Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit can contains audio titles or play a CD-R or Disc-related terms CD-RW that Title (DVD only) The main film content MP3 files. or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number or you to locate it enabling easily. Notes -- Depending ment or on the conditions of the the CD-R/RW disc discs cannot be -- The unit cannot no data, or itself, recording equip- some played on the unit. play the CD-R/RW CD-R/RW -- discs that contain contain different kinds of formatted data Do not attach any seal or label to either side labeled side or the recorded side) of a disc. (the use irregular shaped CDs (e.g., heart-shaped octagonal). It may result in malfunctions. Sections of (Video enabling DVDs playback operations of DVDs may be intentionally by software manufacturers. As this unit plays DVDs according to disc content designed by the software manufacturer, some playback features of the unit may Some Scene fixed On or other functions may be added. supplied with the DVDs. Refer also to the instructions Some DVDs made for business purposes may not be played on the unit. Regional This DVD code of the DVD player and DVDs player is designed and manufactured for playback of region "2" encoded DVD software. 2 The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "2" or "ALL".If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits. 4 a are smaller CD and audio CD picture or a only) piece on a video CD assigned a track number, musical audio CD. Each track is or an available, that composed of one or several chapters. Each assigned a chapter number, enable you to locate the chapter you want. Depending on the disc, no chapters may be recorded. Track not be piece is chapter Do not on musical A title is or Notes or a than titles. other than MP3 and CD-DA data. -- Chapter (DVD only) Sections of a picture you to locate the track you want. video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still you to locate the scene you want. A scene is composed of one or several tracks. Types There of video CDs are two types of video CDs: Video CDs PBC equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the system via menus, search functions, typical computer-like operations. Moreover, of high resolution can be played if they are or still other pictures included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Cont'd) Precautions Storing After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When the unit setting picture and The sound of nearby TV, VCR, or radio during playback. In this case, position a may be distorted the unit away from the TV, VCR, unit after removing the disc. To keep Do not near turn off the or radio, as insecticide spray, or Cleaning temperature discs Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centure ter out. the surface clean use volatile liquids, such the unit. Do not leave rubber of contact with the unit for leave marks on a plastic products in long period of time. They will the surface. the unit Cleaning To clean the cabinet Use as there may be a considerable increase inside the car. a use a soft, dry cloth. If the surfaces soft cloth solution. Do not benzine, use thinner, or are moistened with lightly strong solvents, as these a extremely dirty, mild detergent such as might damage alcohol, the surface Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older About vinyl. Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Handling on playback side of the disc. by the edges so that fingerprints VCD1.1 Do not touch the get the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions of the following symbol is represented by the symbol. one to the disc DVD Video CDs with the PBC (playback control) function. discs Hold the disc on A section whose title has applicable only Notes symbol display " or tape on the disc. Video CDs without the PBC (playback control) function. will not CD MP3 Audio CDs. MP3 disc. 5 INTRODUC Front Panel and POWER( ) player Switches the Display Window (T /R) chapter/track. Forward SKIP/SCAN ON and OFF. Go to NEXT Press and hold for two seconds for Standby indicator Lights red when the player in Standby mode (off). is a fast forward search. Reverse SKIP/SCAN Go to beginning of current chapter/track or ( Q / S ) to PREVIOUS chapter/track. Press and hold for two seconds for a fast reverse search. STOP(9) Stops playback. Pause PAUSE/STEP ( ; ) playback temporarily / press repeatedly for frame-by-frame playback. PLAY(2) playback. Starts Disc Insert a Tray disc here. Opens or OPEN/CLOSE ( closes the disc tray. / ) / / / Display window Shows the current status of the ANGLE active DVD Remote Sensor Point the DVD player. TITLE remote control here. Indicates current title number CHP/TRK DVD inserted Player Indicates current chapter or track number CD Audio CD inserted Indicates total VCD Video CD inserted MP3 elapsed MP3 disc inserted playing time/ time PROG. Programmed playback RANDOM playback Indicates current player function: Playback, Pause, RANDOM active Indicates mode etc. MP3 VCD 6 CD DVD TITLE CHP/TRK PROG. RANDOM ALL active AB repeat Remote Control DVD/TV select buttons Selects OPEN/CLOSE mode of remote operational control (see page Open 21). Player - ON and OFF. POWER OPEN/CLOSE - DVD DISPLAY 1 2 RETURN (left/right/up/down) 4 3 Select - item in the an Select channel of TV and RETURN/TV AV - menu VOL changes TV AV VOL - SLOW PAUSE/STEP STOP PLAY ) PROGRAM ? ? STOP(9)? Stops playback. ? ForwardSLOW(.)? Forward slow playback. REPEAT A-B MARKER SEARCH - RANDOM ZOOM * Selects a subtitle DVD a Press and hold button for about angle ? if setup ? MARKER SEARCH ? menu. ? ? ? menu. Remote control sensor and press remote AAA AAA from the front of the sensor the on all. A-B sequence. RANDOM Play Operation Range (7 m) track number REPEAT Repeat ? Point the remote control at the remote a Repeat chapter, track, title, ? the buttons. Angle: Program CLEAR ? tracks in random order. ZOOM Enlarge remote or removes ANGLE SEARCH Distance: About 23 ft track. menu. point during playback. Remote Control or Remove MARKER Display ) program menu or a mark on the MARKER SEARCH menu. SETUP Mark any S ( language. camera or removes Reverse SKIP/SCAN Accesses available Accesses ) chapter PROGRAM ? or SUBTITLE Selects T ( two seconds. language (DVD) audio channel (CD). an of the disc menu Forward SKIP/SCAN previous chapter a menu. AUDIO the Title Search backward* / go to beginning of current chapter or track or go to 0-9 numerical buttons audio channel. input ?PLAY(H) Starts playback. AUDIO SUBTITLE ANGLE SETUP an video CD a Search forward* / go to next or track. CLEAR playback temporarily / press repeatedly for frame-by-frame playback. Selects Selects AUX A/V Displays SKIP/SCAN Pause Selects numbered items in of if available. ReverseSLOW(,)? Reverse slow playback. ( menu. menu TITLE SKIP/SCAN ; setup the SLOW DVD disc. PAUSE/STEP Remove the Displays with PBC. TITLE PR./CH MENU menu on a ENTER MENU volume of TV. Accesses selection. menu PR./CH SELECT - - turn off TV sound. SELECT/ENTER TV SOUND/MUTE DISPLAY during playback. Acknowledges Display on-screen Selects 3D SURROUND disc This button is not available. Accesses tray. SOUND/MUTE POWER Switches DVD and close the disc battery video image. installation Detach the battery the remote control, and insert cover on (size AAA) batteries aligned correctly. with the rear of two R03 and About 30° in each direction of the front of the sensor Caution Do not mix old and types of batteries new batteries. Never mix different (standard, alkaline, etc.). 7 INTRODUC Rear Panel COAXIAL (Digital audio out jack) digital (coaxial) audio equipment. Connect to AUDIO OUT Connect to *System Select switch (Left/Right) amplifier, receiver an or stereo system. DIGITAL OUT AUDIO OUT COAXIAL L R TO TV VIDEO OUT AC Power Cord TO TV Connect to a (SCART) Jack TV with SCART jack. Plug into the power source. VIDEO OUT Connect to * System You TV with video inputs. Select switch enjoy can a NTSC or PAL discs by using System appropriate system. player is connected with Select switch to choose the PAL: Select when DVD NTSC: Select when DVD PAL-TV. player is connected with player is connected with NTSC-TV. AUTO: Select when DVD Multi ? system TV. When the selected coincide with the picture ? Set off. 8 may not be System System Select switch does not system of your TV, normal color displayed. Select switch when the power is turned Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Connections Tips Depending to your TV and other equipment you wish are various ways you could connect on connect, there the player. Use only one of the connections described below. PREATION Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the System best connections. For better sound AUDIO OUT reproduction, connect jacks to the audio in jacks the player's of your audio/video equipment. amplifier, receiver, stereo or See "Connecting to optional equipment" on page 10. Caution -- Make directly to the input channel. Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection sure the DVD Player is connected TV. Tune the TV to the correct video -- -- system. Connecting Make the to a TV Rear of TV of the following connections, depending capabilities of your existing equipment. one on SCART INPUT VIDEO INPUT AUDIO INPUT L R L Video/Audio connection 1 Connect the VIDEO OUT the video in jack on jack on using the TV the DVD Player to the video cable (V). 2 Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the audio cables. the DVD TV C A V SCART connection Connect the TO TV scart corresponding cable (C). in jacks on jack on the TV the DVD using an Player to the optional scart DIGITAL OUT AUDIO OUT COAXIAL L R TO TV VIDEO OUT Rear of DVD player 9 Connections Connecting to (Cont'd) Optional Equipment Connecting to an amplifier equipped with channel analog stereo or Dolby Surround Rear of DVD player two Right AUDIO OUT jacks on the Player to the audio left and right in jacks on your amplifier, receiver or stereo system, using the supplied audio cables (A). DIGITAL OUT AUDIO OUT COAXIAL L Connect the Left and DVD R TO TV VIDEO OUT Connecting to an amplifier equipped with two digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2 or DTS) channel 1 X Connect one of the DVD Player's DIGITAL AUDIO jacks (COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (coaxial X) audio cable. OUT You will need to activate the 2 (See "Digital Audio Output" player's digital output. page 13). on COAXIAL DIGITAL INPUT Amplifier (Receiver) Digital A Multi-channel sound digital multi-channel connection provides the best quality. For this you need a multi-channel sound Audio/Video receiver that supports one or more of the audio formats supported by your DVD Player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Warning: Due to the DTS will be in DTS Licensing agreement, the digital output digital out when DTS audio stream is selected. Notes -- If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. -- Six Channel Digital Surround Sound via digital cononly be obtained if your receiver is equipped with a Digital Multi-channel decoder. nection -- A To see Screen 10 can the audio format of the current DVD in the On- Display, press AUDIO. L R AUDIO INPUT DV5812E4-ENG Before Operation General Explanation Press 1 3 This manual gives the basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by the DVD Player or is not available on the disc. numbers The Some items On-screen 1 2 Repeat TITLE be can be displayed on the changed on the menu. TV ALL AB OFF 3 or 4 to select an title the setting of an item. be also be used for can For number). setting functions, some setting. Feedback Field Icons Title Repeat Track Repeat All Tracks Repeat A-B Repeat Off Resume during playback. The selected item will be change Repeat Chapter TRACK display operation Press DISPLAY Press status can (e.g., Temporary Display general playback screen. to press SELECT/ENTER to execute the CHAPT On-Screen or 2 The number buttons Action play (non-PBC (non-PBC from this prohibited Video CDs or only) Video CDs only) point not available item. Notes highlighted. Some discs may not provide all of the features on the display example shown below. If no button is pressed for 10 seconds, the On-Screen Display disappears. on-screen DVD Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of 1/3 Chapter Number and 1/12 Time search language Digital Audio Output mode 1 ENG and Subtitle language D 6CH chapter number and chapter number. 1/1 elapsed playing time, point by the elapsed and search the time Shows the current audio soundtrack chapters, and and language, encoding method number, changes the setting. changes the and changes the and changes the 1/2,or Numeric, SELECT/ENTER Numeric, SELECT/ENTER directly. and channel 1/2 language, 1/2 setting. angle number angle number. Shows the current sound NORM. total number of to the desired Shows the current subtitles OFF Sound and total number of mode, angles, 1/2 1/2 setting. VCD1.1 Items Track Number 1/4 Time Audio Channel Sound skip Shows the current Angle VCD2.0 Shows the current and 1/2,or Numeric, SELECT/ENTER titles, to the desired title number. Shows the 0:16:57 Audio skip Selection Method 0:16:57 STER. NORM. Function (Press 3/4 to select desired item) Selection Method Shows the current track 1 /2,or Numeric, SELECT/ENTER and PBC On Shows the mode, number, total number of tracks skip to the desired track number. elapsed playing Shows the audio changes and channel, (Display only) and the setting. mode, -- 1/2 the audio channel. Shows the current sound changes time and 1/2 11 PREATION Before Initial You can Operation (Cont'd) Language Settings set your Personal Preferences own on the play- er. Disc Language Select language a DVD for the disc's Menu, Audio and Subtitle. original language set for the disc is selected. language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 23. If you enter the wrong language Original Using your DVD very first time player When you have just connected your DVD player for the very first time, the first on-screen menu asks which lan- prefer to use for your DVD player. Select language using 3/4 buttons then press SELECT/ guage you Other : : The To select another code, press CLEAR. a ENTER. This operation changes the language screen displays and setup menu. used for the on- Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Code Spanish Italian Aspect Menu Chinese Language Polish Audio Digital Output Hungarian SELECT A LANGUAGE Russian Other------------ Others English Espanol Menu Language Deutsch Select Italiano you MOVE---34 Initial 1 language a see Settings setup setup menu. This is the menu EXIT--ENTER General Operation Disc Audio English Disc Subtitle Spanish Disc Menu French Rating German Country TV menu appears. Code Italian Aspect Menu Press SETUP. The for the when you press SETUP. Language Digital Audio Output Others Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Code Menu Picture Spanish Italian Aspect TV Chinese Language Polish Digital Audio Output Hungarian DVD 4:3 Letterbox: Select when Russian nected. Other------------ Others Aspect Displays Press 3/4 to select the desired item. 4:3 Panscan: Select when The nected. screen selected 3 4 as well as setting for the setting(s). alternate While the desired item is selected, press 2, then 3/4 to select the desired setting. Press SELECT/ENTER to confirm your selection. Some items 5 will show the current item, Press menu. require additional SETUP, RETURN or 16:9 Wide: Select when a 4:3 Letterbox 4:3 Panscan Disc Menu 16:9 Wide TV setup Code Aspect Menu Language Digital Audio your TV con- bars conscreen. 16:9 wide TV is connected. Disc Subtitle Country masking standard 4:3 TV is Disc Audio Others 12 a with Displays pictures cropped to fill sides of the picture are cut off. Rating steps. PLAY to exit the Either standard 4:3 TV is images picture. above and below the 2 a theatrical Output Before Operation (Cont'd) Sound Others Audio Digital Output Each DVD disc has The DRC and Vocal variety output options. player's Digital Audio Output according to the Set the type of audio system you changed use. DOLBY DIGITAL Disc Audio DRC On Disc Subtitle Stream/PCM Disc Subtitle Vocal On Disc Menu PCM Disc Menu PBC On TV /PCM Audio Country Sample Freq. Language Digital 48 KHz TV 96KHz Menu if you connected the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's DIGITAL OUT jack to an amplifier or or with a DTS decoder, Dolby Digital 2 channel digital player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system. amplifier. Dynamic Range Audio Output a The DVD change the Sample Frequency setting, first select the Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz sig- (DRC) format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds at a quietest ones). Then, you may listen to a movie losing clarity of sound. Set lower volume without DRC to On for this effect. Vocal Set Vocal to On is Sample Frequency Control With the DVD and the MPEG decoder. PCM: Select when connected to stereo Language Others DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" equipment PREATION Code Aspect Digital Output Others decoder changed. Rating Code Aspect Menu other be Disc Audio Country a can between On and Off. Rating ment with settings Press 3/4 to select the desired item and press SELECT/ENTER. The setting of the selected item is of audio a playing. into a only when a multi-channel karaoke DVD The karaoke channels on the disc will mix normal stereo sound. To desired nals to 48KHz your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is so PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. made, this unit will pass each type of signal through without any further processing. 13 Before Operation (Cont'd) Parental Control Rating Movies DVDs may contain on applies able for selection to the not suitable for more on some disc complete the disc. These scenes on 8, and alternatively, 1 to scenes Therefore, discs may contain Parental Control information that certain DVD Enter the code of DVD children. Code Country suitable discs. scenes are Ratings are disc, referring were to the list List", page 24.). Code Set Disc Audio Disc Subtitle rated from whose standards country/area Code (See "Country to or scenes are a used to rate the DVD video DE Disc Menu Rating avail- Country TV country Menu The Parental Control feature allows you to discs from being played by your children or to Code Aspect Language dependent. prevent have certain discs played with alternative Disc Audio 8 Disc Subtitle 7 Disc Menu 6 Rating 5 Country TV Code Menu scenes. 3 2 Language Audio Output Others Select 1 4 Aspect Digital the Code Country setup using the 3/4 buttons on menu. 2 While Code is 3 Follow 4 Select the first character Country selected, press 2. 1 Digital Audio Output Unlock Change Others 1 Select 2 While 3 When you have not entered a password yet; Enter a 4-digit password using the numerical but- "Rating" on the Setup menuusing the 3/4 buttons. "Rating" tons to create is selected, press 2. personal 4-digit security password, then press SELECT/ENTER. And enter the 4-digit password again and press SELECT/ENTER to verify. When you have already entered a password; Enter a 4-digit password using the numerical buttons to confirm the personal 4-digit security password, then press SELECT/ENTER. 4 Shift the 6 code the code is below Changing the Select played. Higher unless an alternative scenes scene is available The alternative must have the lower If will not be same played on rating the disc. or a suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. one. no Press SELECT/ENTER to confirm your 5 selection, then press SETUP to exit the is necessary when the 4-digit code" on Steps 4-digit 1-2 shown above to the left as code, code (Rating). then press SELECT/ENTER. Change using the 3/4 buttons then press SELECT/ENTER. 4 Enter the new 4-digit code, then press SELECT/ENTER. 5 Enter exactly the same code a second fy by pressing SELECT/ENTER. 6 Press SETUP to exit the If you If you forget forget your your menu. 4-digit password, time and veri- code to clear the current pass- word, follow the procedure below. 1 Press SETUP to 2 Use the Number buttons to enter the rating display the setup menu. 6-digit number "210499." menu. The 4-digit password is cleared. "P CLr" appears on the display. The message will appear if the disc tray is closed. It will be on the display until you try another feature. 3 14 3/4 buttons. ). 3 rated 1/2 buttons and select using 4-digit password changed (see "Changing Select be the 3/4 buttons. Note Enter the old suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will using Confirmation of the Follow 1 to 8: Some discs contain scenes not left. menu. 1 Ratings on Press SELECT/ENTER to confirm your country selection, then press SETUP to exit the 2 Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. using cursor the second character If you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again. rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. "Rating" 5 a a 3 of step Enter a new code as shown above to the left with DVD and Video CD Operation Playing a Getting Turn on to General Features DVD play VCD2.0 DVD nected to the DVD Note VCD1.1 the TV and select the video input source con- Unless stated, all operations described remote control player. the When you want to enjoy the sound of discs or from the audio system, turn on the audio system and using select the Moving input source connected to the DVD player. setup Some use. operations are can based on be carried out menu. to another TITLE DVD 1/3 1 Press OPEN/CLOSE to open the disc tray. When Load your chosen disc in the 2 facing tray, with the label up. double-sided DVD is inserted, make the side you want to play is facing up. When 3 a Press OPEN/CLOSE to close the READING appears starts automatically. tray. might appear The or DVD menu screen is loading a DVD Use the 1 2 buttons to select the one title, you to can move playback is stopped, then (0-9) to select to another CHAPTER 1/12 a title on a 1/3 disc has to another more chapter as than one chapter, you follows: Press SKIP/SCAN . or > briefly during playback to select the next chapter or to return to the beginning of the current chapter. Press . twice briefly to step back to the previous chapter. To go directly to any chapter during DVD playback, displayed may be displayed first after Video CD which contains a menu. than more follows: VCD1.1 can move menu screen DVD Moving When instead. When the as Press DISPLAY when the TV screen, and playback If playback does not start, menu disc has press the appropriate numerical button a title number. sure on press PLAY. In some cases, the disc a another title you want to view, then press SELECT/ENTER to start press DISPLAY. Then, press 3/4 to select C (chapter). Then, enter the chapter number using the playback. numerical buttons Press TITLE 3 or 4 MENU to return to the title/chapter Note VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the Menu setting the operating procedures for depending on the disc. menu menu screen. You also may set PBC to Off under 13. setup. See page rapid succession. Slow Motion 1 Press SLOW t The player DVD T or VCD2.0 VCD1.1 during playback. will enter SLOW mode. 2 Use the SLOW t T to select the or 3 required speed: 1/16, t 1/8, t 1/4 or t 1/2 (backward), 1/16, T 1/8, T 1/4 or T 1/2 (forward). To exit slow motion mode, press PLAY. or T If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized "Parental -- press the buttons in two-digit numbers, t Notes -- For menu screen. and the exact using may differ Follow the instructions on the each -- (0-9). menu screen. Control", DVDs may have a player will not Your different from your player is 2 (two). (see page 14). region code. on Note Slow motion playback in reverse is not applicable for Video CD. play discs that have a region code player. The region code for this 15 OPERATION with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD 2 You can Search now repeatedly on VCD2.0 DVD during playback. The now will by MX100 > for about or To Video the Search or speed changes: mX2, the TV on a third time. screen. use PBC, you the must set PBC to Off Repeat on the function. See page 13. A-B sequence in a VCD1.1 OFF AB repeat VCD2.0 DVD title: a A- appears briefly 2 Press A-B again the TV on starting point. screen. at your chosen end point. A-B appears briefly on the TV screen, and the repeat begins(a-b repeat appears on the player's dis- sequence play). 3 To cancel the sequence, press A-B. MX2, MX4, MX8 or to menu 1 Press A-B at your chosen > repeatedly required speed: mX2, mX4, mX16, (backward) or MX2, MX4, MX16, (forward). CD, mX4, mX8 (backward) a Video CD with A* to select the With Repeat Repeat go into SEARCH mode. 2 Press and hold SKIP/SCAN . mX100 press REPEAT Off icon appears press- VCD1.1 two seconds a setup the remote control. 1 Press and hold SKIP/SCAN . player Repeat mode, Note On go into PAUSE mode. advance the picture frame by frame PAUSE ing Frame-by-frame playback during playback. will player The VCD1.1 1 Press PAUSE The 3 To exit (cont'd) (forward). 3 To exit SEARCH Random mode, press PLAY. Karaoke DVD Time Search VCD1.1 1 Press RANDOM during playback or in stop mode. The unit automatically begins Random Playback and RANDOM appears on the display window. 2 To return to normal playback, press RANDOM disappears on the display window. RANDOM 1 Press DISPLAY play on appears Random 3 Within 10 the seconds, required CHAPT time of the to select the Time display. use the numerical buttons to enter start time. Enter right hours, minutes and sec- in the box. numbers, press CLEAR to remove the seconds, press SELECT/ENTER to confirm the start time. VCD1.1 Playback ALL TRACK TITLE dis- numbers you entered. Then enter the correct numbers. 4 Within 10 VCD2.0 elapsed playing on-screen If you enter the wrong works with DVD Karaoke discs and DVD on-screen The "-:--:--" appears in the Time Search box. and video CD without PBC. Repeat The at screen. seconds, press 3/4 Search icon in the Note only the playing current disc. onds from left to This function during playback. The Time Search box shows the until -:--:-- The Time Search function allows you to start any chosen time on the disc. 2 Within 10 Tips By pressing SKIP/SCAN . or > during playback, the unit selects another title (track) resumes Random playback. 0:16:57 DVD OFF enter an starts from the selected time invalid on the disc. If you time, playback will continue from the current point. DVD Video Discs 1 To repeat the - Repeat Chapter/Title/Off currently playing chapter, Zoom press REPEAT. The 2 To icon appears Repeat Chapter on the TV The Zoom function allows you to enlarge the video image and to move through the enlarged image. screen. repeat the title currently playing, press REPEAT a second time. The Repeat Title 3 To exit The Video CDs 1 To repeat The 2 To - icon appears on the TV screen. press REPEAT Off icon appears on the TV a 16 or still playback to acti- on 2 Use the 1/2/3/4 buttons to 3 Press CLEAR to press REPEAT. the TV currently playing, All icon appears on the TV repeatedly, the magnification level move through the zoomed picture. currently playing, icon appears the disc Repeat If you press ZOOM screen. the resume normal playback or return to paused image. screen. press REPEAT second time. The during playback increases up to six times. third time. Repeat Track/All/Off the track Repeat Track repeat 1 Press ZOOM vate the Zoom function. Repeat mode, Repeat DVD a Note The screen. The function may not work for some DVDs. function may not work on multi-angle scenes. zoom zoom Operation with DVD and Video CD General Features 3D Surround This unit NORM. DVD produce can (cont'd) a two conventional stereo playback from speakers, instead of the speakers normally required to listen to five more channel audio from a home theater DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate numerical button to select an or multi- system. 1 Press SOUND to select "3D SUR" 2 To turn off the 3D Surround discs: Menus effect, which simulates multi-channel audio during playback. item. Or, use the 1/2/3/4 buttons to highlight your selection, then press SELECT/ENTER. effect, press SOUND DVD Title Menu to select "NORM". again DVD the contents of DVD Video Checking 3D SUR 3D Surround DVD Features Special 1 Press TITLE. Marker Search VCD2.0 DVD VCD1.1 If the current title has a menu, the Otherwise, the disc screen. MARKER SEARCH menu menu will appear the on may appear. 1/9 2 The You can nine points To enter 1 start playback from a memorized point. Up 3 To be memorized. can remove angles, spoken language chapters for the title. camera options, and the title menu, press TITLE again. mark, follow these steps. a 1 Press MENU. memorize. Repeat step on the TV The disc briefly. screen 1 to enter up to nine Marker DVD Disc Menu During disc playback, press MARKER when playback reaches the spot that you want to The Marker icon will appear 2 list menu can and subtitle to points on a 2 To is menu remove displayed. the disc menu, press MENU again. disc. To Recall 1 disc During Camera Marked Scene a playback, The MARKER SEARCH press SEARCH. menu will appear on the screen. seconds, press 1/2 to select a Marker num- 3 Press SELECT/ENTER. 4 To remove then the camera angle if you wish. repeatedly during playback to change Press ANGLE desired select a angle. The number of the current will start from the Marked 1/1 If the disc contains sequences recorded from different angles, the angle icon blinks on the display. You ber that you want to recall. Playback DVD camera can 2 Within 10 Angle angle appears on the display. scene. the MARKER SEARCH menu, press SEARCH. Changing 1 the Audio Language DVD ENG D 6CH To clear 1 a During Marked Scene disc playback, The MARKER SEARCH 2 menu will appear on the ferent audio screen. Subtitles erase. Press CLEAR. The Marker number will be erased from the list. 4 repeatedly during playback language or audio track. to hear dif- a Press 1/2 to select the Marker number that you want to 3 Press AUDIO press SEARCH. Repeat steps 2 and 3 to erase additional Marker DVD 1 ENG Press SUBTITLE different subtitle repeatedly during playback languages. to see the numbers. 5 To remove SEARCH. Note the MARKER SEARCH menu, press If appears, the feature is not available on the disc. 17 OPERATION with Audio CD and MP3 Disc Operation Playing Audio CD and MP3 disc an The DVD Player CD-ROM, CD-R Before MP3 format recordings on read the notes of MP3 recordings, page 20. CD 1 Press and hold SKIP/SCAN . CD-RW discs. or MP3 playing Recordings on play can Search two seconds during playback. The now player will > for about or go into SEARCH mode. 2 Press and hold SKIP/SCAN . > or repeatedly to select the Insert 1 The a disc and close the menu CD tray. the TV on appears required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). screen. 3 Search MP3 Program Program TRACK 1 TRACK 1.MP3 TRACK 2 TRACK 2.MP3 TRACK 3 TRACK 3.MP3 TRACK 4 TRACK 4.MP3 TRACK 5 TRACK 5.MP3 TRACK 6 TRACK 6.MP3 speed and direction indicated are on the menu screen. 4 To exit SEARCH mode, press PLAY. TRACK 7.MP3 TRACK 7 Clear All TRACK 8 STER. 0:56:35 Audio CD Clear All TRACK 8.MP3 56:35 NORM. MP3 menu CD Random OFF 1 1 Press RANDOM menu during playback or when playback is stopped. Press 3/4 to select 2 Playback a During playback, To the current track's stop playback at any other and elapsed playing 2 To return to normal edly play time, press STOP. To during playback. playback, 1 press PLAY or press PAUSE again. > or playback to go to the next track beginning of the current track. Press SKIP/SCAN . twice In previous case CD to another Track Press SKIP/SCAN . the window and repeat briefly during or CD a sequence. The -" Repeat of audio CD, to return to the briefly to step begins Repeat using directly to any track, the numerical buttons CD icon appears on the the on to menu screen. play repeatedly. icon and "OFF" appears 3D Surround to go appears at your chosen end point. icon and "A B" appears on the menu screen, again on the play, press menu screen. back to enter (0-9) MP3 repeat the track currently playing, press REPEAT. Repeat Track Repeat icon and "A 3 To exit the sequence and return to normal A-B again. The Repeat TRACK/ALL/OFF a press RANDOM repeat"RAND." disappears on the dis- press A-B at your chosen start- This unit menu screen. repeat all tracks of disc in the unit, press REPEAT can CD produce a 3D Surround effect, which simulates multi-channel audio playback conventional stereo instead of the five more 2 To or menu screen. A-B and the sequence during playback. The Playback and display window During disc playback, ing point. The MP3 track. the track number 1 To the on playback, until RANDOM 2 Press A-B Moving Random "RAND." appears MP3 1 Press PAUSE 2 To return to or menu screen. Repeat CD Pause automatically begins RANDOM time will appear on the display. Playback will stop at the end of the disc. 3 The unit track then press PLAY. starts. speakers, speakers normally required channel audio from a again or to listen to multi- home theater system. 1 Press SOUND to select "3D SUR" 2 To turn off the 3D Surround from two during playback. effect, press SOUND to select "NORM". second time. The Repeat 3 To exit The ALL icon appears Repeat mode, Repeat on the menu screen. press REPEAT OFF icon appears on the a third time. menu screen. Changing the Audio Channel Press AUDIO repeatedly during playback to hear a (STEREO, LEFT or RIGHT). ferent audio channel 18 CD dif- Programmed Playback Programmed Playback CD MP3 with Audio CD VCD2.0 Note Program allows you to store your favorite particular disc in the player memory. contain 32 tracks The tracks for or is displayed on the TV tray. 2 screen. during playback or in the Program Edit mode. mode to enter E the menu to use PBC, you the must set PBC to Off on the function. See page 13. Program the Press PROGRAM while The VCD Program stop OPERATION tray. is playback stopped. will appear. menu VCD Program E TRACK 1 TRACK 2 will appear to the right of the word side of the menu screen. right Video CD with Insert Video CD and close the 1 menu The a 60 tracks Press PROGRAM 2 On a setup (Audio CD) Insert the disc and close the 1 with Video CD Programmed Playback and MP3 Disc Program can (MP3 disc). VCD1.1 Program on TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 Clear All TRACK 8 Note Press PROGRAM to exit the E mark will Edit Program mode; the disappear. Note Press 3/4 to select track then press SELECT/ENTER to place the selected track 3 the 3 3 to place additional tracks on Program Program TRACK 1 TRACK 12 TRACK 1.MP3 TRACK 8.MP3 TRACK 2 TRACK 8 TRACK 2.MP3 TRACK 2.MP3 TRACK 3 TRACK 10 TRACK 3.MP3 TRACK 4.MP3 TRACK 4 TRACK 3 TRACK 4.MP3 TRACK 3.MP3 TRACK 5 E TRACK 6 To STER. Clear All TRACK 8.MP3 NORM. 56:35 track you selected last is highlighted on Press 3/4 to select the track you want to start 6 playing. Press MENU to 7 move to the next page. to the previous page. press REPEAT. menu screen. on the a menu screen. press REPEAT Off icon appears on a Track from the a third time. menu screen. mode to enter the E Program List during playback or in Program Edit mode. the once. stop mark will appear. 2 Press 2 to move to the Program list. erase 4 Press CLEAR. The track will be erased from the Playback begins in the order in which you programmed the tracks and "PROG." appears on the menu screen. Playback stops after all of the tracks on the Program list played the 3 Use 3/4 to select the track that you wish to from the Program list. Press PLAY to start. have Repeat mode, Repeat The move on menu the program list. Press TITLE to with left. currently playing, icon appears 1 Press PROGRAM programmed on Tracks All icon appears Repeat The Press 2. The "Programmed Playback repeat all tracks of program list, press REPEAT Erasing 5 3-7 of the track Repeat Track To exit OFF 1 MP3 menu repeat The TRACK 7.MP3 Clear All TRACK 8 Audio CD steps second time. TRACK 6.MP3 TRACK 7 To The TRACK 5.MP3 0:00:14 Follow Audio CD and MP3 Disc" Repeat Programmed MP3 E menu. the list. CD Program on list. Program step 4 Repeat Program Press PROGRAM to exit the a Erasing the 1 Follow steps List" as Program Complete Program 1-2 of "Erasing a list. List Track from Program above. 2 Use 3/4 to select "Clear All", then press SELECT/ENTER. To resume normal playback from programmed playback The complete Program The programs are for the disc will be erased. also cleared when the disc is removed. Press and hold PROGRAM until "PROG." indicator disappears in the display window. 19 Additional Information Last Condition DVD This player Notes Memory VCD1.1 CD memorizes the last condition for the last disc If you load a An MP3 file is audio data compressed by using MPEG1, layer-3 file-coding scheme. We call files that have the ".mp3" file extension "MP3 files". The player can not read an MP3 file that has a file extension other than ".mp3". The player can not read a fake MP3 file that has a file extension ".mp3". disc that has its settings the audio memo- rized, the latest stop position is automatically recalled. Notes -- -- Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing to play it. MP3 disc DVD engaged for about five minutes, the DVD Player will automatically turn itself off. Video Mode With certain ering or means Setting DVD VCD2.0 4. 5. A Vertical interpolation the video straight or De-interlace is not In that case, the with changing video of the disc. during playback displayed on the TV screen. Check whether video quality is improved. You can repeat above procedure until desired picture quality appears. → MODE2 → MODE3 MP3 file in the 1st track, it We do not recommend use 7. 8. cannot File MODE4 e.g. "********.MP3". Do not use special letters such 9. → MODE5 Please as or less "_?!><+*}{`[@ etc. Total number of files on the disc should be less than 200. 10. Use 74 minute CD-R discs minute CD-R changed; → using CD-RW discs. only. names should be named using 8 letters must incorporate ".mp3" extension finished CD-R discs ]:;\/.," video mode number is Procedure of video mode is system. MP3 files in the first one. 6. mode, press and hold DISPLAY about 3 seconds Changed no ISO9660 file an requires MP3 files. If you wish to playback MP3 format all the data in the disc or use a new files, lines. That on and change creates session disc track. If there is VCD1.1 mode. MODE1 single playback perfectly matched with the disc. picture quality can be improved To - Creator", which discs, the playback picture may be flick- Dot Crawl is shown is limited Sampling Frequency / only at 44.1kHz Bit rate / within 32 320kbps CD-R physical format should be "ISO 9660" If you record MP3 files using the software which cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We therefore recommend that you use "Easy-CD picture appears when you leave the in stop mode for about five minutes. Player player 1. screen saver After the Screen Saver has been with this follows: 3. Screen Saver compatible as 2. The MP3 Discs About MP3 you have watched. Settings remain in memory even if you remove the disc from the player or switch off the player. on (700M) (650M), Do not use 80 software → MODE1 If you turn off the the power, the video mode will be back to initial state (MODE1). This DVD player requires discs/recordings to meet certain technical standards in order to achieve playback quality. Pre-recorded DVDs set to these standards. There of recordable disc formats MP3 are are optimal automatically many different types CD-R containing (including files). Customers should also note that permission is required in order to download MP3 files and music from the Internet. Our company has no right to mission. Permission should always be copyright 20 owner. grant such per- sought from the Additional Information Your remote control is well as Before If your LG TV is not the TV Controlling capable of operating the remote select the device to be control, press DVD The device), be sure or TV to to press DVD (to operate or a differ- TV button first. POWER, PR./CH(3/4), VOL(1/2), MUTE and TV AV buttons ling as operated. To switch the remote control mode ent your DVD limited functions of LG TV. using on remote control are To set the remote control Code 2, hold down both the TV button and "2" number button on the remote control. (If the batteries in the remote control are while the remote control is set to Code 2, the will revert Code 1.) replaced setting To set the remote control back to Code 1, hold down both the TV button and "1" number button on the remote control. Notes If the remote control does not Remote Control Codes for LG TV This remote control supports two remote control codes for LG TV: Code 1 and Code2. When the unit is set the remote control activated for control- LG TV. Setting operated, to Code 2. shipped control is set to Code 1. from the factory, the remote TV, try one of the other code operate your particular or use the remote control originally supplied with the LG TV. Due to the variety of codes used by manufacturer, COMPANY cannot will guarantee that the OUR remote control operate every model of the LG TV. 21 OPERATION Troubleshooting Check the following guide for the possible cause of a before problem Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD player does No disc is inserted. Plug the power securely. Insert a window is The TV is not set to receive DVD picture. signal output. No sound. on that the DVD or, the TV appropriate video input mode the picture from the DVD so the TV on appears screen. Connect the video cable into the securely. securely. The connected TV power is turned off. Turn The Select the correct equipment connected with the signal output. The audio cables are not connected audio receiver Turn the on equipment jacks connected with the audio cable. Set the Digital Audio Output to the position, then turn on the DVD player again by pressing POWER. correct wrong The disc is mode of the so Connect the audio cable into the The power of the equipment connected with the audio cable is turned off. is set to the input you can listen to the sound from the DVD player. securely. Digital Audio Output position. jacks the TV. on securely. The is display The video cable is not connected audio cable is not set to receive DVD playback picture (Check lit.) Select the player The disc. cord into the wall outlet audio CD indicator in the not work. No service. contacting Clean the disc. dirty. poor. The DVD not start player does playback. No disc is inserted. Insert a disc. (Check that the DVD, audio CD indicator in the DVD or display is lit.) An unplayable disc is inserted. Insert a playable disc. (Check the disc type, color system and Regional code.) The disc is down. placed upside Place the disc with the playback side down. The disc is not placed within the guide. Place the disc inside the The disc is dirty. The level is set. Rating The remote control is not does not work remote properly. sensor Cancel the pointed player. at the of the DVD player. There is an obstacle in the rating tray correctly path of the player. Rating function or change level. Point the remote control at the remote sensor The remote control is too far from the DVD the disc Clean the disc. the The remote control on guide. of the DVD Operate the 23ft(7m). player. remote control within about Remove the obstacle. remote control and the DVD The batteries in the remote control exhausted. 22 are Replace the batteries with new ones. Language Code Enter the (See appropriate 12). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6565 Afar 7079 Faroese 7678 Lingala 8375 Slovak 6566 Abkhazian 7082 French 7679 Laothian 8376 Slovenian 6570 Afrikaans 7089 Frisian 7684 Lithuanian 8377 Samoan 6577 Ameharic 7165 Irish 7686 Latvian, Lettish 8378 Shona 6582 Arabic 7168 Scots Gaelic 7771 Malagasy 8379 Somali 6583 Assamese 7176 Galician 7773 Maori 8381 Albanian 6588 Aymara 7178 Guarani 7775 Macedonian 8382 Serbian 6590 Azerbaijani 7185 Gujarati 7776 Malayalam 8385 Sudanese 6665 Bashkir 7265 Hausa 7778 Mongolian 8386 Swedish 6669 Byelorussian 7273 Hindi 7779 Moldavian 8387 Swahili 6671 Bulgarian 7282 Croatian 7782 Marathi 8465 Tamil 6672 Bihari 7285 Hungarian 7783 Malay 8469 Telugu 6678 Bengali; Bangla 7289 Armenian 7784 Maltese 8471 Tajik 6679 Tibetan 7365 Interlingua 7789 Burmese 8472 Thai 6682 Breton 7378 Indonesian 7865 Nauru 8473 Tigrinya 6765 Catalan 7383 Icelandic 7869 Nepali 8475 Turkmen 6779 Corsican 7384 Italian 7876 Dutch 8476 Tagalog 6783 Czech 7387 Hebrew 7879 Norwegian 8479 Tonga 6789 Welsh 7465 Japanese 7982 Oriya 8482 Turkish 6865 Danish 7473 Yiddish 8065 Panjabi 8484 Tatar 6869 German 7487 Javanese 8076 Polish 8487 Twi 6890 Bhutani 7565 Georgian 8083 Pashto, Pushto 8575 Ukrainian 6976 Greek 7575 Kazakh 8084 Portuguese 8582 Urdu 6978 English 7576 Greenlandic 8185 Quechua 8590 Uzbek 6979 Esperanto 7577 Cambodian 8277 Rhaeto-Romance 8673 Vietnamese 6983 Spanish 7578 Kannada 8279 Rumanian 8679 Volapuk 6984 Estonian 7579 Korean 8285 Russian 8779 Wolof 6985 Basque 7583 Kashmiri 8365 Sanskrit 8872 Xhosa 7065 Persian 7585 Kurdish 8368 Sindhi 8979 Yoruba 7073 Finnish 7589 Kirghiz 8372 Serbo-Croatian 9072 Chinese 7074 Fiji 7665 Latin 8373 Singhalese 9085 Zulu REF NC 23 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 14). Code Country Code Country Code Country Code Country AD Andorra ER Eritrea LC Saint Lucia SB Solomon Islands AE United Arab Emirates ES Liechtenstein SC Seychelles Afghanistan ET Spain Ethiopia LI AF LK Sri Lanka SD Sudan AG FI Finland LR Liberia SE Sweden AI Antigua and Anguilla FJ Fiji LS Lesotho SG Singapore AL Albania FK Falkland Islands LT Lithuania SH Saint Helena AM Armenia FM Micronesia LU Luxembourg SI Slovenia AN Netherlands Antilles FO Faroe Islands LV Latvia SJ Svalbard and Jan AO Angola FR France LY Libya AQ Antarctica FX AR Argentina AS American Samoa AT Austria AU Barbuda France Mayen Islands MA Morocco SK Slovak Territory) MC Monaco SL Sierra Leone GA Gabon MD Moldavia SM San Marino GB Great Britain MG Madagascar SN Senegal Australia GD Grenada MH Marshall Islands SO Somalia AW Aruba GE Georgia MK Macedonia SR Suriname AZ GF French ML Mali ST Saint Tome and BA Azerbaidjan Bosnia-Herzegovina GH Ghana MM Myanmar SU Former USSR BB Barbados GI Gibraltar MN Mongolia SV El Salvador BD Bangladesh GL Greenland MO Macau SY Syria BE Belgium GM Gambia MP Northern Mariana Islands SZ Swaziland BF Burkina Faso GN Guinea MQ Martinique (French) TC Turks and Caicos Islands BG Bulgaria GP Guadeloupe (French) MR Mauritania TD Chad BH Bahrain GQ Equatorial MS Montserrat TF BI Burundi GR Greece MT Malta BJ Benin GS S. BM Bermuda BN Brunei Darussalam BO (European Guyana Guinea French Southern MU Mauritius TG Togo MV Maldives TH Thailand GT Guatemala MW Malawi TJ Tadjikistan Bolivia GU Guam MX Mexico TK Tokelau BR Brazil GW Guinea Bissau MY Malaysia TM Turkmenistan BS Bahamas GY MZ Mozambique TN Tunisia BT Bhutan HK Guyana Hong Kong NA Namibia TO Tonga BV Bouvet Island HM Heard and McDonald NC New Caledonia BW Botswana Islands NE BY Belarus HN Honduras BZ Belize HR Croatia CA Canada HT Haiti CC Cocos HU Hungary ID CG (Keeling) Islands Central African Republic Congo CH CI Ivory CK Cook Islands CL Chile CM Cameroon CN China CO CR CF (USA) TP East Timor Niger TR Turkey NF Norfolk Island TT Trinidad and NG TV Tuvalu NI Nigeria Nicaragua TW Taiwan NL Netherlands TZ Tanzania Indonesia NO UA Ukraine IE Ireland NP Norway Nepal UG Uganda Switzerland IL Israel NR Nauru UK United Coast IN India NU Niue UM USA Minor (French) Tobago Kingdom Outlying British Indian Ocean NZ New Zealand Territory OM Oman US United States IQ Iraq PA Panama UY Uruguay IR Iran PE Peru UZ Uzbekistan Colombia IS Iceland PF Polynesia (French) VA Vatican Costa Rica IT Italy PG VC Saint Vincent & cs Former Czechoslovakia JM Jamaica PH Papua New Philippines CU Cuba JO Jordan PK Pakistan VE Venezuela CV Cape Verde JP PL Poland VG CX Christmas Island KE Japan Kenya PM Saint Pierre and VI Virgin Virgin CY Cyprus KG Kyrgyzstan PN Pitcairn Island VN Vietnam CZ Czech KH Cambodia6 PR Puerto Rico VU Vanuatu DE KI Kiribati PT Portugal WF Wallis and Futuna Islands DJ Germany Djibouti KM Comoros PW Palau WS Samoa DK Denmark KN Saint Kitts & Nevis PY Paraguay YE Yemen DM Dominica KP North Korea QA Qatar YT DO Dominican KR South Korea RE Reunion YU Mayotte Yugoslavia DZ Algeria KW Kuwait RO Romania ZA South Africa EC Ecuador KY Cayman RU Russian Federation ZM Zambia EE Estonia KZ Kazakhstan RW Rwanda ZR Zaire EG Egypt LA Laos SA Saudi Arabia ZW Zimbabwe EH Western Sahara LB Lebanon 24 Republic Republic IO Principe Territories Isls. Georgia & S. Sandwich Republic Islands Anguilla Islands Guinea City State Grenadines Miquelon (French) Islands Islands (British) (USA) Specification General Power Power requirements AC 110-240V consumption 14W Dimensions Mass , 50/60 Hz 430 X 69 X 245 (approx.) 3.2 (approx.) mm (w/h/d) kg Operating temperature 5˚C to 40˚C Operating humidity 5%to90% (41˚F to REF NC 104˚F) System Laser Semiconductor Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response laser, wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise More than 100dB (ANALOG Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB OUT connectors only) (DVD) (CD) Outputs VIDEO OUT 1 Audio output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (analog audio) 2.0 Vrms Vp-p 75 ohms, sync negative (1 KHz, 0 dB), 330 Ω, RCA jack (L, R) x 1/SCART(TO TV) Accessory Videocable.......................1 Audiocable.......................1 Remotecontrol....................1 Batteries.........................2 Design and specifications are subject to change without notice. Manufactured under license from Confidential unpublished "DTS" and "DTS Digital works. Out" are Dolby Laboratories. "Dolby" and the double-D symbol are trademarks Copyright 1992-1997 Dolby Laboratories. All rights reserved. trademarks of Digital Theater Systems, of Dolby Laboratories. Inc. 25 P/N: 3834RS0030U
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project