LG | LV3796 | User guide | LG LV3796 User guide

LG LV3796 User guide
FC999P/991SP_NA3GLL-Eng.
1/21/03
10:43
AM
Page
1
Owner's manual
VHS-Hi-Fi-StereoVideo recorder
LV3797
LV3796
LV3767
LV3766
HQ (High Quality) picture
enhancement system
Full function infra-red remote
control handset
Programmable 88 channel memory
Frequency synthesised tuner
ACMS (Automatic Channel Memory
System) plus the channels will be
with
-
preset, sorted and memorized
automatically.
(Automatic Clock Setting
System) the clock will be set
automatically by reading the
ACSS
-
present time and date from the
teletext the German time TV
stations ARD
or
7 event/1 month
ZDF.
programmable
timer
Built-in ShowView
programming
VPS/PDC function
Recording and playback for 16:9
Wide-screen format
Energy Saving function
ICON O.S.D (On Screen Display)
Enables menu to display on the
blue picture and actual picture.
NTSC playback on PAL TV
PREMIERE Compatible
LP Long Play recording and
playback
Logic & Picture Search
-
-
Child Lock
Auto Power
on
and
Play
Fine still, Frame advance & Slow
functions
Real Time Counter
Quick Start function
Auto
Tracking System
Reception of Stereo, Bilingual
Mono sound
Hi-Fi Audio System
Simulcast
Model No. FC999P/FC991SP/FC969P/FC961SP
Part No. 3834RP0088E
AV3
VIDEO IN
L-AUDIO IN-R
PROG.
REC/ITR
P/STILL
Recording
&
-
FC999P/991SP_NA3GLL-Eng.
1/21/03
10:43
AM
2
Page
Welcome to LG
Thank you for buying this LG video cassette recorder Model
LV3797/LV3796/LV3767/LV3766.
Before
using
buttons
on
pages 4 to
your video recorder you need to be familiar with the
the remote control handset
6),
(see
and you need to set up the video recorder
stations in your
and
area
so
that your TV set
of
names
some
of the
OPERATING THE VIDEO RECORDER,
can
receive
so
that it
pictures
receive the TV
can
from it
(see
p 12 to
14).
Installation
POWER
This Video Recorder operates
on a
mains
supply
of 200-240V~,50 Hz.
SERVICE
Never
remove
the
of the video recorder. There
cover
inside. If it does not operate
properly, unplug
are no user
serviceable parts
it and contact your dealer.
PRECAUTIONS
For safe
operation
following
in mind when
and
satisfactory performance of your
selecting a place for its installation.
Shield it from direct
Avoid
dusty
or
it away from
sunlight and keep
places.
video recorder,
sources
keep
the
of intense heat.
humid
Install the video recorder in
Avoid locations
a
horizontal
subject to strong
position only.
vibration.
Do not
place
the video recorder
Do not
move
the video recorder from
near
strong magnetic fields.
a
cold to
a
hot location
or
vice
versa.
MOISTURE CONDENSATION
Under
special
conditions like
moisture condensation
can
moving
build up
your video recorder from
on
the head drum,
one
a
cold to
a warm room,
of the most crucial parts of
the video recorder. In order to prevent in such case any damage to your video
recorder HEAD DRUM, connect the video recorder power cord to the AC line, press
the
"
"
button
on
and allow at least 2 hours for the video recorder to
dry
out.
CONDENSATION IS LIKELY TO OCCUR WHEN:
The video recorder is moved from
a
cold
room
to a warm room or from outdoors to
inside your home.
A cold
The
The
room
is heated
humidity
is very
apparatus shall
filled with
liquids,
This
not be
such
product
requirements
2
quickly.
high.
as
exposed
to
dripping or splashing and that
placed on the apparatus.
no
objects
vases, shall be
is manufactured to comply with the radio interference
of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
3
Page
Contents
Operating
the video recorder
4-6
The remote control handset
4-5
The front & back of the video recorder
Installing your
Setting
On
the VCR
screen
Storing
7-9
output channel
10
11
displays
TV stations
12-16
Automatic
Manual
12
tuning
13-14
tuning
Moving the programme order of the
Clearing stations from the
Time and date
Using
"TV station table" menu
"TV station table" menu
the VCR to
play
back
a
16
18-19
tape
&
Unloading
Types of video
a
video cassette
18
cassette
18
How to
using the Energy saving mode
18
Normal
playback
19
Still
picture playback
19
CM
(Commercial Message) Skip
19
playback features
20-22
Fast forward, Rewind
20
Logic
&
OPR
(Optimum Picture Response)
picture search
Slow motion
20
20
playback, Shuttle
21
Selection of the colour system
22
Recording
Using
with decoder
22
the video recorder to record
23-24
To record
23-24
Immediate timer
Programming
24
(ITR)
the video recorder timer
25-29
Introduction to ShowView
ShowView
programming
Recorder timer
Checking
&
on
25
the TV
25-26
screen
programming using the
on screen
displays
clearing stored timer programmes
Overlapping timer programmes
Video
Programme System (VPS)
Other features
The Hi-Fi stereo sound
Digital tape counter, Remaining tape volume, Memory stop
31
32
playback,
memory power shut-off
Compatibility, Self-Diagnosis
32
33
34
35
36
the TV
37
38
Specifications
calling
29
Tracking controls
equipment
(easy) operations
Before
29
30
system
from another
Controlling
29
Introduction
The child lock, 16:9
ez
27-28
30-33
Automatic
Recording
15
17
setting
Loading
Other
6
video recorder
for service
.
.
.
39
3
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
Page
4
the video recorder
Operating
The Remote Control Handset
This video recorder is
designed
so
that almost all of its functions
from the REMOTE CONTROL HANDSET. This must have
be controlled
can
sight" to the
sensor on the front of the video recorder. It must be within an angle of 30 degrees
either side of the centre. The maximum operating distance is about 7.5m (25 feet).
Some functions
also be controlled with the controls
can
a
on
"line of
the FRONT PANEL of the
video recorder.
1
POWER
123
EJECT
TV/ VCR
VCR
TV
MUTE
MENU
4
2
VCR
3
TV/VCR
PROG.
CLK/CNT
POWER
To switch the video recorder
To control the video
VCR:
To monitor, view
TV:
To watch TV
CM SKIP
programme
PROG.
67
LP
STOP
REW
8
P/STILL REC ITR
PLA
p
and off.
37).
Set this button to;
TV
5
CLEAR
(see
on
4
i
5
CURSORS
(MENU)
display
To
the
(see
on screen
playback
or
view the video recorder's tuner.
view another programme while
or
recording
one
24).
p
display (OSD)
menu
(see
p
11).
FF
(D, E, F, G)/PROG./VOL
DE:
During OSD
Switches
9
menu, for
one
moving
the cursor, selection bar up
channel programme up
or
or
down.
down.
During playback, tracking control.
During still playback, adjusting vertical tremble.
To adjust manual fine tune for receiving normal
audio and
picture (see
p
13).
FG:
10
During OSD menu, for moving the cursor
Adjust the playback speed (see p 21).
To clear a data (see p 29).
To adjust the TV volume (see p 37).
VIDEO Plus+
6
to the left or
right.
CLEAR
To reset the tape counter to
7
TAPE SPEED SELECT
8
Basic
To select the
zero
(LP)
recording speed
(see
p
of the tape
31).
(see
p
23).
operation buttons;
P/STILL
(see
p 19,
REWIND/REVIEW
PLAY
(see
p
23).
(see
20).
p
19).
FAST FORWARD/CUE
(see
p
20).
STOP
(see p 19).
REC/ITR (see p 23
9
to
24).
NUMBER BUTTONS:
To select programme channels. To programme numeric information into On
screen
displays.
SHOWVIEW (LV3797/LV3767)
10 To
the
display
programme
(see p 25 to 26).
4
menu
for ShowView
programming
on
the handset
1/21/03
FC999P/991SP_NA3GLL-Eng.
Operating
10:43
AM
Page
5
the video recorder
EJECT
11
To
eject
a
tape (see p 18).
POWER
12
EJECT
TV
To control the LG TV
MUTE
13 To
turn the TV sound
(see
p
37).
and off
on
TV/ VCR
(see
p
37).
VCR
TV
MUTE
MENU
14
PROG.
14 AV/TV AV
To select the
15 OK/CLK/CNT
Confirms
of
a
recording
&
playback (see
p 23,
37).
CLEAR
on screen
This function will
only operate
when
a
LP
STOP
REW
fast forward
picture
search
through
16
P/STILL REC ITR
PLA
FF
ez
tape is loaded.
POWER OFF
17
CM SKIP
16 To
15
CM SKIP
PROG.
selection
(see p 11).
display (see p 31).
To switch the display on the TV screen between the current time, the tape
counter (in hours and minutes) and the remaining tape volume
(see p 31).
menu
Calls the
TV
CLK/CNT
input source
11
12
13
30 seconds of
recording (see
p
18
19).
POWER OFF
17
ez
18
ez
19
CHILD LOCK
(see
36).
p
19
REPEAT
(see
p
VIDEO Plus+
36).
To turn the CHILD LOCK function on/off
(see
p
33).
How to install batteries
The wireless remote control is
powered by
two "AAA" size batteries.
1
Remove the battery compartment lid.
(Lift it up while pressing the tap forward.)
2
Load the
the lid.
new
batteries with their
polarities (
and
) aligned properly
Do not use an old and a new battery together, and never
with a manganese battery.
If you do not intend to use the remote control unit for
remove the batteries and store them in a cool, dry place.
use an
a
and
alkaline
long period
replace
battery
of time,
5
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
Page
6
Operating
the video recorder
The front of the Video Recorder
LV3797/LV3796
12
AV3
VIDEO
IN
4
3
56789
PROG.
REC/ITR
P/STILL
L-AUDIO IN-R
13
11
12
10
LV3767/LV3766
12
11
4
3
5
789
6
AV3
VIDEO IN
L-AUDIO
13
IN-R
10
12
1
To switch the video recorder
(see
2
3
on
9FF
10 P/STILL
and off.
Switches to still
18).
p.
pause
/
To stop the tape,
or
eject
it from the video recorder
(see
p
18).
VIDEO CASSETTE COMPARTMENT
When
a
cassette is inserted
loading
is
completed
automatically.
4
5
6
6
signals
from the remote control handset.
REC/ITR
Used to record and set the ITR
(see
p 23 to
24).
REWIND
To
play
the tape
(see
p
19).
to
19), during recording
23).
( / )
Allows you to
scan
through
memorized channels.
AUDIO INPUT TERMINALS
To record audio from
To receive
REMOTE CONTROL SENSOR
To receive the
12
PROG.
p
p
an
(L/R)
external audio
source
(see
p
8).
13 VIDEO INPUT TERMINAL
MULTI FUNCTION DISPLAY
time
7
8
11
(see
picture (see
(Instant
Timer
Recording)
a
signal
Camcorder) (see
p
from another video
9).
equipment (e.g.
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
7
Page
your video recorder
Installing
IMPORTANT!
The
guidance given
specific
please
information. Make
additional
sound and
be able to
this
a
VCR
using
sure
picture quality
enjoy
facility
Connecting
Decoder
a
forms of
common
check with your manufacturers instruction books for
all connections
SCART leads is
from
are
made with both your VCR and
from the mains to avoid
appliance unplugged
Connecting
enjoy
the next three pages in the most
on
connection. However
one
video-tape playback.
stereo sound when
if you connected
playing
just
a
damaging
your
equipment.
of the best ways to achieve
If you
stereo video
optimum
stereo TV you will
own a
tape; you will be unable
to
normal aerial lead.
a
to a TV & DECODER
Aerial (NOT SUPPLIED)
quality of the sound and picture can be greatly
influenced by the positioning, quality and state of
repair of your external aerial.
The
(NOT SUPPLIED)
Television (NOT SUPPLIED)
Rear view of
your VCR
E
E
AN
NE
EURO AVZ
DECODER
AUDIO
SORTIE
OUT
G
L
D
R
EURO AV1
AUEIO/
VIDEO
AERIAL
SORTIE
ANTENNE
RUT
All connections must be made with
Aerial Connection Cable
both your VCR and Television
unplugged from the mains
(75 Ohms) (SUPPLIED)
Do not try and force the connector into
place, it should plug in easily.
SCART Lead
?
If you use a SCART lead picture quality will be improved and
you will be able to enjoy stereo sound when playing tapes.
INITIAL PRESET
For the
following steps
we
do
assume
that you have
just
connected your video recorder for the very first time. In this
the
case
video
recorder
is
on
after
mains
A
B
NN L
connection. You should not touch any buttons yet. On the
CH
DKEFI
PSS FANDERE
Pr-12
connected TV you will
Note
-
If this
was
1
menu
ACMS
now see.
does not appear, your video recorder
programmed already.
Select the desired country with
"A": Austria, "B":
cursor "F"
Belgium, "CH": Switzerland,
"D": Deutsch, "DK": Denmark, "E":
"N":
Norway,
and "G" buttons.
Spain,
"NL": Netherlands, "P":
"F": France, "I":
Italy,
Portugal, "S": Sweden,
"SF": Finland.
2
Press the "OK" button to start the automatic
the channels of the TV stations in your
storing
of
01
C03
00
ARD
area.
Pr-12
s
E
ACMS
7
FC999P/991SP_NA3GLL-Eng.
1/21/03
10:43
AM
Page
8
your video recorder
Installing
Connecting
An audio
to your Hi-Fi
system
can
(Audio Out)
be connected to the AUDIO OUT sockets
on
the back of your
VCR.
Please remember to turn the volume to minimum
increase the volume; this will prevent
from
an
extremely noisy
shock!
Hi-Fi
FM
damaging
(NOT SUPPLIED)
AM
FM
RL
ENE
AN
NE
EURO AVZ
DECODER
AUDIO
SORTIE
OUT
L
EURO AV1
AUEIO/
VIDEO
AERIAL
SORTIE
ANTENNE
R
UT
Audio out sockets & Phono
Leads
The phono sockets for connecting
VCR to your Hi-Fi
Left sound
set; L
=
are on
your
the back of the
output,
R
=
Right
sound output. You normally have to
select the AUX function on your Hi-Fi.
Please note if you press the MUTE
button on your TV only the sound from
the TV's
speaker is
your Hi-Fi.
8
switched
off, not
on
your Hi-Fi, then
your
speakers
gradually
and
save
your
ears
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
Page
9
your video recorder
Installing
Camcorder Connection
Make
sure
all connections
from the mains to avoid
Camcorder easier
sockets
on
we
the front
You may also
use
made with both your VCR and Camcorder
are
damaging
have
panel
equipment.
your
To make
the Audio IN
designed
(Left
connecting
and
Right)
unplugged
your
and Video IN
of your VCR.
the SCART socket
the
on
rear
of your VCR
as
well.
Back view of your VCR
ENE
AN
NE
EURO AVZ
DECODER
AUDIO
SORTIE
EURO AV1
AUEIO/
VIDEO
OUT
G
L
D
R
AERIAL
SORTIE
ANTENNE
RF.OUT
Front view of your VCR
VIDEO IN
L- AUDIO IN -R
To AUDIO OUT
(L/R)
Audio Left &
Right
To VIDEO OUT
Lead
Camcorder (NOT SUPPLIED)
Video Lead
Whichever socket you choose to
SC, AV1, AV2
If you
are
using
or
use
remember to select the
appropriate recording input
e.g.
AV3.
the sockets
on
the front
panel
select
source
AV3.
9
FC999P/991SP_NA3GLL-Eng.
1/21/03
10:43
AM
10
Page
the VCR
Setting
output channel
Your TV set receives the video recorder
select
Take
or
a
like another TV station. So you have to
signal
programme number for the video recorder.
to select this programme
care
watch
number, whenever you control the video recorder,
if you have selected this programme number, which
recording. Only
a
call video programme number, you will
the
see
picture
from the video recorder
on
we
the
screen.
If you connect
a
monitor
TV set
or a
equipped
will not necessary. Consult the
adjustment
Connect the video recorder
with audio and video terminals, this
operating
instructions of your TV set.
described in the section
as
on
Connections
(see
on
previous page).
the output channel of the VCR
Setting
SETTING THE VIDEO CHANNEL WITH
PLAYBACK
The output channel of the video recorder is set at UHF channel 36.
1
Turn
on
2
Play
any video cassette tape
3
the TV set and the video recorder.
Select the correct channel
And then you will
(Note
the
see
on
(36)
your video recorder.
on
your TV set.
picture being played
in video recorder.
You will need to look at the instruction manual for your TV set if you do
-
not know how to do
this.)
SETTING THE VIDEO CHANNEL WITH
1
2
OSD
(ON
Turn
on
SCREEN
DISPLAY)
the TV set and the video recorder.
above No. 3. And then you will
Repeat
see a
blue
background picture
on
the TV
screen.
3
Store this channel in
Changing
If the channel 36 is
can
change
1
Select
2
During
on
on
your TV set.
the transmitter channel
already occupied
at your TV set, or if the
picture
is distorted, you
the transmitter channel of the video recorder.
an
unoccupied
channel between 22 and 68
power off mode
the VCR for
more
Then, "RF36" will be
3
unused programme number
an
(only
clock
display)
on
your TV set.
press the PROG. " "
or
" " buttons
than 4 seconds.
displayed
Press the PROG. " "
or
on
the VCR's
" " buttons
on
display.
the VCR to select another video channel
e.g. between channels 22 and 68.
You
can
also set it to "OFF" if there is any interference when your TV is connected
to the VCR with a SCART lead.
4
10
Press the
"
"
button when you have finished.
1/21/03
FC999P/991SP_NA3GLL-Eng.
On Screen
10:43
AM
11
Page
Displays
A number of the features of this video recorder
handset with On Screen
Displays (menus)
can
be set and altered
the TV
on
using
the
screen.
POWER
The Main
EJECT
menu
1
Switch
2
Press the "i" button to
3
Press the
your TV set and video recorder
on
display
the Main
by pressing
menu.
VCR
TV
MUTE
MENU
and "G" buttons to select the desired
cursor "F"
TV/ VCR
the "POWER" button.
menu
PROG.
and press the
CLK/CNT
TV
"OK" button.
Note
-
After
using
the
menus
press the "i" button to
remove menus
from the TV
CLEAR
CM SKIP
PROG.
screen.
LP
Pr-12
PSET
R
ACMS
AB
VCR
OSD
Dr.
C
TIME
DATE
SYSTEM
TALK
DECO-
STOP
REW
P/STILL REC ITR
PLA
FF
fOSD
ON
OFF
AUDIO
16:9
4:3
VCR
OPR
DER
REC
Used to record
a
programme with the timer
p 27 to
(see
28).
PR SET
Used to view stored TV stations
or
to set TV station information
manually (see
p 13 to
14).
VIDEO Plus+
ACMS
Used for automatic
of the TV stations
setting
(see
p
12).
TIME DATE
To set the clock
SYSTEM
manually (see
(AUTO
→
PAL
→
p
17).
MESECAM)
Select the colour system used for
playback
and
recording (see
p
22).
ABC OSD
language of the On Screen Display. You can select
English, Deutsch, Francais, Italiano, Espanol, Dutch and Portuguese.
Allows you to select the
between
Dr.
To check
AUDIO
problem
a
with your VCR
(STEREO, LEFT,
RIGHT
(see
or
33).
p
MONO)
Used to select the channel for audio output
OSD
(On
Screen
Switches the
(see
p
34).
(see
p
31).
Display)
on screen
display OFF
or
ON
16:9/4:3
To select the aspect ratio of your TV
AUTO: for
playing
(see
p
33).
back wide-screen programmes
as
wide, normal programmes
as
normal.
4:3
:
for
16:9
:
for
recording
and
recording
and
playback
with
a
normal format.
playback
with
a
16:9 Wide-screen format
recording.
TALK VCR
A voice tells you how to
Deutsch)
-
only
use
the features in the
menus
if TALK VCR is ON
(only
LV3796 and LV3766.
DECODER
To
use
DECODER scart socket for the connection of
a
pay-TV
decoder
(see
p
22).
OPR
To
improve
the
playback picture (see
p
20).
11
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
Page
12
Storing
Up
TV stations
to 88 TV stations
recorder. These
Automatic
POWER
automatically
or
manually.
tuning:
the TV and the video recorder
Turn
on
(with
the "POWER"
button).
EJECT
2
TV/ VCR
be stored in the memory of this video
can
tuning
To carry out Automatic
1
(88 channels)
be set
can
VCR
TV
MUTE
Press the "i" button and select "ACMS
"
by using
the
and "G" buttons.
cursor "F"
MENU
12
CLK/CNT
CLEAR
REW
P/STILL REC ITR
PLA
ON
OFF
AUDIO
TV
CM SKIP
STOP
TIME
DATE
SYSTEM
TALK
DECO-
AB
C
VCR
OSD
Dr.
Pr-12
fOSD
PROG.
LP
Pr-12
PSET
R
REC
PROG.
3
4
FF
16:9
4:3
VCR
DER
OPR
Press the "OK" button.
Select the desired country with
cursor
A
"F" and "G" buttons.
"A": Austria, "B":
B
CH
NN L
DKEFI
PSS FOTHERS
Pr-12
Belgium, "CH": Switzerland,
ACMS
"D": Deutsch, "DK": Denmark,
"E":
"N":
"P":
5
VIDEO Plus+
Spain,
"F": France, "I":
Norway,
Portugal, "S": Sweden, "SF": Finland, Others.
Press the "OK" button to start the automatic
area.
The VCR's clock will be set
when
recorder's clock
After
finishing
please
manually"
the
storing,
completed
menu
tuning
on
"Setting
appears
the TV
Press the "i" button to
menus
from the TV
C03
00
ARD
the video
Pr-12
E
s
ACMS
page 17.
the video
has been
when the "TV station table"
on
01
(LV3797/LV3767).
see
recorder will sort the stations.
Automatic channel
12
automatically
has finished
tuning
If the clock is wrong
7
storing
of the channels of the TV stations in your
automatic
6
Italy,
"NL": Netherlands,
02
03
04
05
06
07
08
PSET
R
screen.
remove
screen.
the
C02
S40
S11
C02
--
00
00
00
00
ZDF
WDR3
BR3
HR3
--
-----
--
--
-----
--
--
-----
MOVE:
DELETE:
,
1/21/03
FC999P/991SP_NA3GLL-Eng.
Storing
Manual
10:43
1
Page
13
TV stations
tuning
TV station Channel numbers and Station
stored
AM
names can
be
POWER
EJECT
manually.
Press the "i" button
The
menu
will appear
on
on
TV/ VCR
the video recorder handset.
the TV
screen.
VCR
TV
MUTE
MENU
PROG.
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
16:9
4:3
TALK
VCR
DECODER
AB
C
VCR
OSD
Dr.
TV
CLK/CNT
fOSD
ON
OFF
AUDIO
OPR
CLEAR
CM SKIP
PROG.
LP
2
Use the
cursor "F"
and "G" buttons to select "PR SET"
STOP
REW
Pr-12
REC
ACMS
TIME
DATE
SYSTEM
16:9
4:3
TALK
VCR
DECODER
AB
C
P/STILL REC ITR
PLA
FF
VCR
ez
POWER OFF
OSD Dr.
fOSD
AUDIO
3
Press the "OK" button to enter the manual
ON
OFF
tuning
mode.
PR
CH
01
PSET
R
4
OPR
MFT
--
STATION
VIDEO Plus+
-----
CHANNEL/CABLE
:
AV
Press the "AV" button to select the type of TV
channels.
"C" for standard channels C02-C69.
"S" for
special
channels
(Cable) S01-S41.
PR
PSET
R
5
CH
01
MFT
STATION
00
CHANNEL/CABLE
:
AV
Enter the channel number that you wish to enter the
station with number buttons
or cursor
"D" or "E"
buttons.
PR
CH
01
PSET
R
6
MFT
STATION
00
CHANNEL/CABLE
:
AV
Use "G" button to select "MFT" and control the fine
tuning
of the station
by pressing
the
cursor
"D" and
"E" buttons.
PR
01
PSET
R
7
CH
S27
MFT
STATION
CHANNEL/CABLE
:
AV
Use "G" button to select "STATION".
PR
01
CH
S27
MFT
STATION
00
PSET
R
13
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
Page
14
TV stations
Storing
8
POWER
Press the "OK" and select the
buttons to select the station
cursor
name
"D" and "E"
from list.
EJECT
NOTE:
TV/ VCR
VCR
TV
Press the
MUTE
use
"G" button to
input
the station
name
PR
01
CH
S27
MFT
00
CH
S27
MFT
00
STATION
CH
S27
MFT
STATION
PSET
R
manually.
MENU
1)
PROG.
CLK/CNT
TV
Enter the first letter of the station
repeatedly pressing
the
cursor
"D
name
"
by
and "E
"
buttons.
CLEAR
CM SKIP
2)
PROG.
LP
STOP
Now
move
position
P/STILL REC ITR
the
with the "G" to the next
cursor
and write in the next letter of the station
name.
REW
PLA
FF
For corrections
back and forth with the
move
PR
01
PSET
R
"F" and "G" buttons.
3)
When you have the station
required
name as
press the "OK" button and "i" button.
9
Press the "OK" button to select it.
VIDEO Plus+
PR
01
00
P SET
R
10 Press the "i" button.
The "TV station table"
menu
will be
displayed.
02
03
04
05
06
07
08
PSET
R
11
End the station
Selecting
2
can
be selected in either of two ways.
Use the "D" and "E" buttons to
move
from
one
station to another.
Enter the programme number with the number
buttons, to select
a
station
directly.
the stations 1 to 9 with the
one
channel will be selected at
once.
When the channel is
a
seconds
changed,
duration) gives
You
can
digit only.
a screen
enter
The
display (of
the programme number,
and if the broadcast is STEREO
14
the "i" button.
stored TV stations
Stored TV stations
1
storing by pressing
or
BIL
(Bilingual).
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE:
DELETE:
,
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
15
Page
TV stations
Storing
the programme order of the "TV
station table" menu
Moving
If you want to
easily
1
do
move
so as
the order of the TV stations you
follows:
TV/ VCR
Press the "i" button
The
POWER
menu
on
will appear
the remote control handset.
on
the TV
EJECT
can
VCR
TV
MENU
screen.
PROG.
CLK/CNT
2
Select "PR SET" with the
TV
and "G" buttons
cursor "F"
and press the "OK" button.
CLEAR
CM SKIP
PROG.
PR
CH
01
PSET
R
3
MUTE
MFT
00
STATION
ARD
CHANNEL/CABLE
:
AV
LP
STOP
REW
P/STILL REC ITR
PLA
FF
Press the "i" button.
The "TV station table"
menu
will be
displayed.
02
03
04
05
06
07
08
C02
S11
S40
C02
--
--
--
00
00
00
00
--
-----
--
-----
--
-----
MOVE:
DELETE:
PSET
R
ZDF
WDR3
BR3
HR3
C.LOCK
,
VIDEO Plus+
4
Move the
cursor
down
or
up with the
cursor
"D" and
"E" buttons to select the programme that you want to
move
"Pr
to another
03").
position
in the
menu
(for example
Now you press the "G" button to select
00
00
ARD
ZDF
S40
C02
00
00
BR3
HR3
--
--
-----
--
--
-----
--
--
-----
PSET
R
Move the
position
C03
C02
03
04
05
06
07
08
move.
5
01
02
cursor
to
place
the
cursor
line at the
where to insert the selected programme
(example
Pr
01
02
03
04).
04
05
06
07
08
C03
C02
00
00
S40
00
ARD
ZDF
BR3
C02
00
HR3
--
--
-----
--
--
-----
--
--
-----
PSET
R
6
Press the "OK" button.
The selected station will be moved to the
new
programme number.
01
02
03
C03
C02
00
00
S40
00
ARD
ZDF
BR3
05
06
C02
00
HR3
07
08
PSET
R
7
Move other stations, if you wish,
by repeating steps
--
--
-----
--
--
-----
--
--
-----
MOVE:
DELETE:
,
4
to 6.
8
Press the "i" button to
remove
the
menus
from the TV
screen.
15
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
Page
16
TV stations
Storing
Clearing
table"
stations from the "TV station
menu
If you want to clear
recorder's store you
1
POWER
TV/ VCR
EJECT
VCR
TV
MUTE
2
easily
can
Press the "i" button
The
TV station from the video
a
so as
follows:
the remote control handset.
on
will appear
menu
do
on
Select "PR SET" with the
the TV
screen.
cursor "F"
and "G"
buttons and press the "OK" button.
MENU
PR
PROG.
CLK/CNT
CLEAR
PSET
R
STOP
P/STILL REC ITR
3
00
STATION
ARD
CHANNEL/CABLE
:
Press the "i" button.
The "TV station table"
REW
PLA
menu
will be
displayed.
FF
02
03
04
05
06
07
08
ez
POWER OFF
C02
S11
S40
C02
Move the
cursor
down
or
up with the
cursor
(for example
station "Pr
-
--
--
--
-----
--
--
-----
04").
MOVE:
DELETE:
VIDEO Plus+
00
00
00
ARD
ZDF
WDR3
05
C02
00
HR3
--
--
--
--
-----
--
--
-----
the selected station will be cleared.
01
02
03
C03
C02
S11
00
00
00
ARD
ZDF
WDR3
05
06
C02
00
HR3
PSET
R
7
Clear other stations, if you wish,
by repeating steps
4and5.
Press the "i" button to
TV
screen.
remove
the
,
short while,
07
08
6
-----
MOVE:
DELETE:
PSET
R
a
,
C03
C02
S11
08
Press the "F" button to delete. After
-----
02
03
01
06
07
5
00
00
00
"D" and
"E" button to select the programme that you want to
clear.
ZDF
WDR3
BR3
HR3
00
--
PSET
R
4
16
MFT
CM SKIP
PROG.
LP
CH
01
TV
menus
from the
--
--
--
--
-----
--
--
-----
-----
PLEASE
DELETE:
WAIT,
AV
1/21/03
FC999P/991SP_NA3GLL-Eng.
Time and date
Setting
also
17
Page
the video recorder's clock
of the
day
during
AM
setting
The clock in this video recorder
the
10:43
week)
Automatic Channel
checked
continually
information is
broadcasting
being
(including
automatically
It is
Tuning (LV3797/LV3767).
against
broadcast
Teletext
a
the date
gives
and the time. It is set
the date and time if this
as
it is
all channels
by
It is,
signal (LV3797/LV3767).
therefore, unlikely that you will need to alter the clock set-
tings.
Whenever the video recorder receives
the date and time it
adjusts
a
signal containing
itself to these
signals
(LV3797/LV3767).
Therefore, the video recorder clock is likely to be always
the correct time
showing
To
1
2
manually
(LV3797/LV3767).
alter the clock:
Press the "i" button. The Main
TV
menu
appears
on
the
screen.
POWER
Select "TIME DATE" with the
cursor "F"
EJECT
and "G"
buttons.
12
REC
PSET
R
SYSTEM
ACMS
TV/ VCR
AB
C
VCR
OSD
Dr.
VCR
TV
MUTE
12
fOSD
AUDIO
ON
OFF
16:9 TALK
4:3
VCR
DECODER
OPR
MENU
PROG.
TV
CLK/CNT
3
Press the "OK" button.
CLEAR
CM SKIP
PROG.
The auto
adjust
mode
be set to "OFF"
can
by pressing
LP
AUTO
"D" and "E" buttons if you want to set the time
ADJUST
:
STOP
P/STILL REC ITR
ON
REW
PLA
FF
TIME
DATE
manually (LV3797/LV3767).
ez
4
POWER OFF
Press the "OK" button.
HHMMDDMMYY
:.
-
-
--
--
--
---
.
SHOWVIEW
C.LOCK
TIME
DATE
VIDEO Plus+
5
Use the number buttons
"G" buttons alter the
Year
(using
or cursor
"D", "E",
Hours, Minutes, Day,
the 24 hour
"F" and
Month and
clock).
HHMMDDMMYY
:.
0010103WED
.
The
day
of the week will appear
automatically
when
TIME
DATE
you have entered the date.
NOTE: Enter 1
?
Correct
01, 2
as
errors
as
02 etc.
during inputting
with
cursor "F"
and
"G" buttons.
6
Press the "i" button to
screen.
remove
the
The set time will appear
recorder's
menus
on
from the TV
the video
Display.
17
FC999P/991SP_NA3GLL-Eng.
1/21/03
10:43
AM
18
Page
the VCR to
Using
NOTE
and
Loading
-
recorder is
plugged
&
Loading
of
unloading
into
a
a
tape
a
video cassette is
only possible
when the video
source.
power
Unloading
back
play
video cassette
a
Insert the cassette into the video recorder with the window side up and the
1
away from you. Do not attempt to insert
pointing
or
upside
down
back to front.
Gently
press the middle of the tape.
Press the "EJECT" button,
2
cassette which is
a
arrow
either the handset
on
or
the front
of the video
panel
recorder.
The cassette compartment will open and the video cassette will be
partially
ejected.
"EJECT" will appear for
few seconds
a
It is not necessary to switch
button before
Note
ejecting
It is advisable to
-
a
on
the TV
on
screen.
the video recorder,
by pressing
the "POWER"
video cassette.
video cassette from the video recorder when not in
remove a
Rewind and unload it.
use.
Types
of video cassette
Use VHS tapes in this video recorder.
On SP
the maximum record and
(standard play)
time is that
given
on
the
time is twice that
given
on
the
playback
video cassette.
For
For
example
E-180 will
example
T-120 will
On LP
record/play
play
back for 180 minutes.
back for 120 minutes.
the maximum record and
(long play)
playback
video cassette.
For
example
E-180 will
record/play
For
example
T-120 will
play
Accidental
erase
erasure
what is
back for 240 minutes.
prevention
already
back for 360 minutes.
recorded
-
on
If you do not wish to record
it, then
remove
the
safety
on a
tab
on
tape, and hence
the back
edge
of
the video cassette.
Cover the hole with
from which the
safety
cellophane tape
It is
-
to record on a video cassette
possible
tab has been removed
the hole with
by covering
cellophane
tape.
Refer to the instructions included with the video cassette for
How to
Your VCR has
an
economic power
a
the
using
recording,
Energy saving
Energy Save
save
display
information.
mode
feature which if set will
where the clock
more
will
place
disappear.
your VCR onto
If you have
an
programmed
this feature will not work.
1
Press the
2
Press the
"
"
Energy Save
.
"
button
on
the VCR.
"
button
on
the VCR
All the
displays
again
will be
and your VCR will go into
disappeared
on
the video recorder's
display.
3
18
For
releasing
the energy
saving mode,
press the
"
"
button
once
again.
1/21/03
FC999P/991SP_NA3GLL-Eng.
the VCR to
Using
Normal
1
Press the "PLAY" button to start
playing
the TV
few seconds
a
tracking
on
tape (called Normal playback). "PLAY"
a
Play (SP)
or
at normal
speed (SP)
If it is
Automatic
cannot be
a
automatically adjust
the
tracking
to
give
LP will be shown
-
on
and
LP),
play
MUTE
safety
of the
playback
up to 5 minutes
playback by pressing
VOL
CLEAR
can
CM SKIP
display.
tab removed,
TV
CLK/CNT
it back at the correct
the video recorder's
If the video cassette has had its
"P/STILL" button. Continue
playback
TV
PROG.
half-speed (Long Play
interruptions
End the
VCR
whether the tape has been recorded
PROG.
so
that it
erased, then the video recorder will automatically start playing the tape.
Short
TV/ VCR
-
automatically recognise
long play tape
-
EJECT
MENU
Long Play (LP) tape
or
playback
POWER
screen.
The video recorder will
-
The video recorder will
?
tape
a
quality picture.
Standard
speed.
19
Page
back
play
will appear for
the best
3
AM
playback
Automatic
2
10:43
LP
STOP
REW
P/STILL REC ITR
PLA
FF
be made with the
the "PLAY" button.
with "STOP" button.
If the end of the
tape is reached, the video recorder stops automatically,
rewinds, stops, ejects the tape and switched off.
Still
You
picture playback
playback
can
VIDEO Plus+
and advance
a
Press the "P/STILL" button
1
still
picture
as
during playing
follows:
back. You
see a
still
picture
on
the TV
screen.
2
You
the vertical tremble with the
can remove
the "P/STILL" button.
picture by pressing
picture
one
To switch off the still
3
The still
playback
will return to
CM
will
only
stop mode,
frame at
picture,
a
"D" and "E" advance the still
By repeatedly pressing
this button the
time.
press the "PLAY",
or
the "STOP" buttons.
continue for about 5 minutes, after which the video recorder
to avoid
damage
of the tape.
(Commercial Message) Skip
(While
or
advances
cursor
in
play mode) Pressing "CM SKIP"
button
on
the remote control
skips
commercials
other programme material.
Pressing 1, 2, 3, 4, 5,
or
6 times
respectively. CM SKIP skips
then
resumes
normal
skips 30, 60, 90, 120,
150
or
180 seconds,
at full 180 seconds of commercials in a few
seconds,
playback.
19
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
20
Page
Other
playback features
This video recorder will allow you to
POWER
EJECT
search
a
wind
rapidly
tape, view individual frames
cassette
on a
tape forwards
a
tape, and
play
backwards,
or
back
tape in slow
a
motion.
TV/ VCR
VCR
TV
MUTE
Fast forward
Pressing
MENU
PROG.
TV
CLK/CNT
the fast forward
CM SKIP
PROG.
STOP
LP
P/STILL REC ITR
FF
("
tape
Pressing
button with the tape
")
forward. "FF" will appear for
Rewind
CLEAR
(FF)
few seconds
a
on
stop, will rapidly wind the
on
the TV
screen.
(REW)
the rewind
backwards.
"
REW
REW
("
"
button with the tape
")
will appear for
a
few seconds
on
on
stop, will rapidly wind the tape
the TV
screen.
LOGIC search
REW
PLA
FF
If you hold down either of the search buttons
5
the tape, the
rewinding
or
times)
the normal
picture
will be
REW
("
seen
"
"
or
FF
This enables you to
playback speed.
") during
at about 7 times
see
(NTSC
fast
forwarding
recorded tape:
where you
are on
the
tape. When you release the button the video recorder continues fast forward
or
rewind.
Picture search
You
VIDEO Plus+
can
also
quickly
CUE & REVIEW
-
carry out
visual search for
a
a
desired section
on a
During playing
back press either the fast forward
The tape will be
5
times)
played
the normal
reached press the
Picture search will
PLAY
-
some
During
a
FF
")
or
rewind
backwards at about 7 times
When the desired
("
(NTSC
point
on
ON
AUDIO
OFF
16:9
4:3
TIME
DATE
SYSTEM
TALK
DECO-
VCR
AB
C
VCR
OSD
Dr.
20
button.
recorded tape:
play
back
continue for about 3 minutes, after which the video recorder
mode.
on
or
the TV
still
playback,
the sound is muted and there will be
screen.
Picture
Response)
automatically improves playback picture quality by adjusting
Press the "i" button to
cursor "F"
display
the Main
menu.
and "G" buttons to select the "OPR".
2
Press the
3
Press the "OK" button.
4
Press "D" and "E"
repeatedly
NOTE: This feature
can
DER
5
")
the tape has been
the condition of the tape.
1
REW
button and the video recorder will continue to
visual search
(Optimum
This feature
"
playback
"noise streaks"
OPR
or
("
speed.
only
will return to normal
Note
forward
playback speed.
"
the tape at the normal
RE
tape using
the CUE and REVIEW functions.
only
to select
be
OFF, SOFT
operated
Press the "i" button to release it.
when
or
playing
SHARP.
a
tape.
your VCR to
1/21/03
FC999P/991SP_NA3GLL-Eng.
Other
During playing
You
Page
21
playback, Shuttle
This video recorder is
2
AM
playback features
Slow motion
1
10:43
reach the
can
with
equipped
back
or
still
a
picture
slow motion and shuttle features.
press the
cursor "F" or
"G" button.
following playback speeds:
(-7xplay, -3xplay, -play, still,
1/19 slow,
If distortions
4
To switch off the slow motion, press the desired function, e.g.
still picture or stop.
be
seen
in the
TV/ VCR
EJECT
VCR
TV
MUTE
play, 2xplay, 7xplay)
3
can
POWER
picture,
remove
them with the
cursor
"D" and "E"
MENU
buttons.
PROG.
playback, search,
TV
CLK/CNT
CLEAR
The slow motion
CM SKIP
will
only continue for about 30 seconds, after which the
video recorder will return to normal playback mode, to avoid damage of the tape.
When using the special playback effects (logic, picture search, still and slow motion
playback) with a tape recorded in LP, there will be a loss of colour and there may be
noise bars on the picture.
playback
PROG.
LP
STOP
REW
Note:
to
PLA
FF
ez
During Slow
to
P/STILL REC ITR
POWER OFF
Still
playback, the noise bars can be appeared on the picture according
status of tape (especially NTSC recorded tape). In these cases adjust the tracking
playback a tape with the optimum picture quality. You can adjust the tracking with
the
cursor
or
"D" and "E" buttons.
SHOWVIEW
VIDEO Plus+
21
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
Page
22
Other
playback features
Selection of the colour system
Because your video recorder is
colour standard, you
can
with dual
equipped
playback recordings
in PAL
B/G and SECAM B/G.
During playback
colour system
problems
your video recorder detects the recorded
automatically. Only
with very weak
the colour system
1
POWER
TV/ VCR
if there
recordings,
are
colour
you should select
manually:
Press the "i" button to
display
the Main
menu.
EJECT
VCR
TV
MUTE
2
Press the
cursor "F"
and "G" buttons to select the
"SYSTEM".
MENU
PROG.
CLK/CNT
12
TV
REC
PSET
R
Pr-12
ACMS
TIME
DATE
fOSD
AUDIO
CLEAR
ON
OFF
SYSTEM
AB
C
VCR
OSD Dr.
+-
16:9 TALK
4:3 VCR
DECODER
SYSTEM
OKi
OPR
CM SKIP
PROG.
LP
STOP
REW
P/STILL REC ITR
PLA
3
Press the "OK" button.
FF
VCR
REC
PSET
R
Pr-12
ACMS
fOSD
AUDIO
4
Use the
cursor
ON
OFF
16:9
4:3
AUTO
Dr.
PAL
MESECAM
SYSTEM
i
DER
"D" and "E" buttons to
select the desired colour system.
"AUTO": automatic colour selection,
"PAL": PAL
VIDEO Plus+
recordings
"MESECAM": MESECAM
5
Press the "i" button to
menus
from the TV
Recording
We have
for
1
2
remove
the
screen.
with decoder
already described,
pay-TV
recordings
how to connect
stations like PREMIERE
on
decoder
a
page 7.
Press the "i" button and select the "DECODER"
with the
cursor "F"
and "G" buttons.
Press the "OK" button and select to "ON"
pressing
by
REC
the "D" and "E".
3
22
TV
screen.
remove
ON
OFF
Pr-12
ACMS
fOSD
AUDIO
Press the "i" button to
PSET
R
the
menus
from the
ON
OFF
+
16:9
4:3
TALK
VCR
AB
C
DECODER
VCR
OSD Dr.
+
-
DECODER
-
OPR
i
1/21/03
FC999P/991SP_NA3GLL-Eng.
Introduction to the
1
2
3
variety
are a
of
You may record
23
Page
modes available to you
immediately
You may record at
for
a
set
a
later time
(up
are
period
watching).
of time of up to 9 hours. This is
to 1 month from the
on
present) using
may be set at the
recordings
of course, that there is sufficient time
There
this video recorder.
Recording (ITR).
to 7 of these automatic
Up
on
programme you may be
immediately (a
called Instant Timer
features
recording
recording
You may record
timer.
AM
the video recorder to record
Using
There
10:43
same
the built-in
time
-provided,
the video cassette.
two ways in which you can programme the video recorder for automatic
recording.
You
can
(see
p 25 to
2
You may set the times
-
use
26) (LV3797/LV3767).
p 27 to
(see
Note
the ShowView feature, which is built into this video recorder
1
manually, using
either the
on screen
display (OSD)
28).
Ensure that the
safety
tab has not been removed from the video cassette
on
which you wish to record.
To record
1
Switch
2
Insert
on
a
3
video cassette with the window side up, and the
from you,
pressing
the TV set and video recorder.
or
if
a
video cassette is
already
loaded switch
arrow
pointing
away
the video recorder
on
POWER
by
TV/ VCR
the "POWER" button.
Select the programme channel with the number buttons
or cursor
EJECT
"D" and "E"
VCR
TV
MUTE
MENU
buttons.
PROG.
TV
CLK/CNT
Note:
If you want to record from either of the EURO SCART sockets
video recorder,
or
from the AUDIO/VIDEO
"AV" button to the correct
"SC01": for Hi-Fi audio
position,
recording
as
input
shown
by
terminals
the
from AUDIO IN
on
display
(L/R)
on
the back of the
on
the front, press the
the TV
CLEAR
CM SKIP
PROG.
LP
STOP
terminals of your audio
REW
system.
4
5
6
for
recording
from EURO AV1 scart socket.
"AV2":
for
recording
from DECODER/EURO AV2 scart socket.
"AV3":
for
recording
from VIDEO IN and AUDIO IN
Press the "REC/ITR" button to start
If you want
the TV
to avoid
"RECP" will appear for
the TV
FF
Long Play
recording. "RECORD"
(see
p
unwanted
recording
a
POWER OFF
6).
mode.
will appear for
a
few
VIDEO Plus+
few seconds
on
scenes
the TV
press the "P/STILL" button.
screen.
To continue
recording
again.
Press the "STOP" button to stop
on
terminals
screen.
press the "P/STILL" button
7
(L/R)
Select LP with the "LP" button, if you want to record in
on
PLA
ez
"AV1":
seconds
P/STILL REC ITR
screen.
recording. "STOP"
will appear for
a
few seconds
screen.
23
1/21/03
FC999P/991SP_NA3GLL-Eng.
POWER
EJECT
10:43
AM
Page
Using
the video recorder to record
Recording
one
You
can
watch
TV/ VCR
VCR
TV
MUTE
MENU
PROG.
CLK/CNT
1
2
on
record
TV programme while
one
CM SKIP
programme while
watching
watching
another
another
by selecting
the channel you
your TV set.
Start
a
recording by following
Select to TV mode
indicator will
TV
3
CLEAR
24
above steps 1 to 5
by pressing
disappear
the "TV/VCR" button
the video recorder's
on
(see
23).
p.
on
the remote control. "VCR"
display.
Select the TV station you want to watch with the programme channel selector
on
your TV set.
PROG.
LP
STOP
REW
P/STILL REC ITR
PLA
FF
Immediate timer
When
making
a
(ITR)
recording
you
can
set your video recorder to
stop after
a
set
period
of
time.
1
2
Press the "REC/ITR" button to start
recording.
Press the "REC/ITR" button several times until the desired
shown
on
the video recorder's
can
time is
Display.
Each time you press this button the ITR time will be extended
maximum time that
recording
by
30 minutes. The
be set is 9 hours.
VIDEO Plus+
When the ITR
recording
have been
completed,
the video recorder will stop and switch
itself off.
3
24
To cancel
a
ITR
recording,
press the "POWER"
or
the "STOP" button.
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
the video recorder timer
Programming
The timer allows you to record broadcasts
to 7
Up
within
recordings
25
Page
month
one
automatically.
be
can
programmed
at the same time.
Introduction to ShowView
ShowView
lets you set the video recorder to
programming
record programmes,
(LV3797/LV3767)
by simply entering
These ShowView Codes
a
ShowView Code.
published
in TV
listings
almost all newspapers and TV Guides.
They
can
one
to eleven
name as
digits
are
and
shown in the
page of
sample
vary from
RTL 2
with the programme
usually
are
in
18.55 RTL 2 Nachrichten
9-811-065
19.00 Tierdokumentation,
251-317
19.30 Bitte lacheln
856-152
TV Guide.
a
The ShowView Codes contain all the information needed
by
the video recorder
time and programme
information
(programme
number).
programmed
start and
into the video recorder
ShowView Code if you wish to do
may wish to extend the stop time in
running
stop date and
It is easy to alter the
For
so.
case
by
example
a
22.35 Der Pate von
7-073-959
you
the programme is
late.
SHOWVIEW is
trademark of Gemstar
registered
a
Development Corporation.
The SHOWVIEW
from Gemstar
is manufactured under licence
System
Development Corporation.
ShowView
screen
These
1
programming
(LV3797/LV3767)
new
timer
programming
on
the TV
POWER
feature is very easy to
use:
TV/ VCR
EJECT
VCR
TV
MUTE
Press the "SHOWVIEW" button. The "SHOWVIEW"
MENU
menu
appears.
PROG.
CLK/CNT
TV
--------
CLEAR
ONCE
REC SHOWVIEW
2
Select the
recording type by repeatedly pressing
a
programme
DAILY: To record
a
programme every
Saturday
and
Sunday)
WEEKLY: To record
a
once
PROG.
LP
the
"D" and "E" buttons. It select between:
ONCE: To record
CM SKIP
0~9,
STOP
REW
P/STILL REC ITR
PLA
FF
only.
1234
day (except
DAILY
at the same time.
REC SHOWVIEW
0~9,
programme at the same time
every week.
3
Use the number buttons to enter the ShowView
number of the broadcast you want to record,
as
it is shown in your TV
exactly
VIDEO Plus+
magazine.
If you enter incorrect number, press the "F" button
to erase
it, and enter the correct number.
25
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
26
Page
the video recorder timer
Programming
4
POWER
Press the "OK" button.
You will
see
the data of the selected
PR
ARD
ZDF
EJECT
broadcasts.
?
TV/ VCR
VCR
TV
the
?
MENU
If
PROG.
CLK/CNT
entering
"- -"
is
and repeat the
--
--
--
--
--
--
--
--
--
--
--
--
:
00~14: 00
30~20: 00
:
00~20 : 30
:
:
--~--
:
:
--~--
:
--~--
:
--~--
:
:
:
--
--
--
--
LP
LP
SP
SP
SP
SP
SP
procedure.
you have to enter the
displayed,
programme number of the station, you want to
TV
record from. This will
CLEAR
TIME
15
13
819
220
If "PLEASE CHECK" appears, you have to check
MUTE
DATE
an
CM SKIP
automatically
be stored in
internal SHOWVIEW channel map.
PROG.
?
LP
STOP
If you want to record from either of the EURO
P/STILL REC ITR
SCART sockets
REW
PLA
AUDIO/VIDEO
FF
from either of the
or
input terminals, repeatedly
the "AV" button for the correct
5
If you wish to
displayed
you
any of the
change
can
do
press
display.
settings
as
so.
Move between them with the
cursor "F"
buttons. Use the number buttons to
PR
ARD
ZDF
BR3
and "G"
change
the date
DATE
TIME
15
13
819
2
--
--
--
--
--
--
--
--
--
--
--
--
:
:
:
:
:
:
:
00~14: 00
30~20: 00
00~20 : 30
:
--~--
:
--~--
:
--~--
:
--~--
--
--
--
--
LP
LP
SP
SP
SP
SP
SP
and the time.
VIDEO Plus+
6
Press the "G" button and activate
VPS with the
"
"
symbol
deactivate
or
cursor
"D" and "E" buttons.
will be
displayed
on
the TV
PR
ARD
ZDF
BR3
screen.
DATE
15
13
819
220
--
--
--
--
--
--
--
--
--
--
--
--
VPS/PDC
7
Press G to select the
recording speed.
E to select the desired
tape speed (SP, IP,
IP mode determines how much
switches
speed
8
menu
the program.
inputs
displayed
a
the TV
on
screen.
displayed,
you have
wrong data. Please correct the data.
Press the "i" button to
TV
mode does
with the "i" button.
If "PLEASE CHECK" is
entered
9
(IP
of the timer programmes set into the video
recorder will be
?
LP).
tape is left and
operate during VPS/PDC ON.)
Finish your timer
A
or
remove
the
menus
from the
screen.
10 Make sure that there
is
a
video cassette in the
video recorder and turn the video recorder off with
the "POWER" button.
The timer set "TIMER"
symbol
is shown
on
the
video recorder.
NOTE:
Timer
mode.
26
recordings
do not work
during
power
on
TIME
00~14 00
30~20 00
00~20 30
:
:
--~--
:
--~--
--
--~--
--
--~--
--
:
:
:
:
ON
--
LP
LP
SP
SP
SP
SP
SP
or
from SP to LP, if necessary, to
complete recording
not
Press D
:
:
PR
ARD
ZDF
BR3
DATE
TIME
15
13
819
:
220
:
--
--
--
--
--
--
--
--
--
--
--
--
:
00~14: 00
30~20: 00
00~20 : 30
:
--~--
:
:
--~--
:
--~--
:
--~--
:
:
:
--
--
--
--
LP
LP
SP
SP
SP
SP
1/21/03
FC999P/991SP_NA3GLL-Eng.
Programming
10:43
AM
27
Page
the video recorder timer
Recorder timer
programming using
On Screen Displays
the
Without the ShowView code you need to enter the
programme number, date, and the start and stop times of
the programme you wish to record.
1
Press the "i" button and select "REC" with the
cursor
"F" and "G" buttons.
POWER
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
16:9
4:3
TALK
VCR
DECODER
AB
C
VCR
OSD
Dr.
TV/ VCR
EJECT
VCR
TV
MUTE
fOSD
AUDIO
ON
OFF
OPR
MENU
PROG.
2
Press the "OK" button to enter the timer
programming
mode.
PR
--
--
DATE
--
--
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
:
:
:
:
:
:
:
--
--~--
:
--
--~--
:
--
--~--
:
--
--~--
:
--
--~--
:
--
--~--
DELETE:
SP
SP
SP
SP
SP
SP
CLEAR
CM SKIP
PROG.
LP
STOP
Press the "OK" button and select the programme
number that you wish to record
using
the number
number and dates 1 must be entered
PLA
FF
ez
PR
buttons.
Programme
P/STILL REC ITR
,
REW
3
TV
CLK/CNT
as
DATE
POWER OFF
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
:
:
:
--
:
:
:
:
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
01,2as02etc.
?
If you want to record from either the EURO
SCART sockets
or
from the AUDIO/VIDEO
VIDEO Plus+
input
terminals, repeatedly press the "AV" button for the
correct
4
display.
Press the "G" button and enter the
day using
the
number buttons.
If you want to
PR
ARD
change recording type:
1)
Press the "OK" button.
?
DLY: for
?
Weekly (SUN
the
daily recordings
to
SAT):
from
Monday
To record
a
to
--
--
--
--
--
--
--
--
--
--
--
--
--
--
the
recording type
with the
--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
--
:
:
:
:
:
:
:
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
programme at
PR
DATE
ARD15---
2) Select
TIME
--
--
Friday.
time every week.
same
DATE
--
cursor "F"
and
--
--
--
"G" buttons and select it with the "OK" button.
--
--
TIME
SP
SP
SP
SP
:
:
SP
:
:
SP
:
:
SP
SUMOTUWETHFRSA
--
--
--
--
--
--
--
:
--~--
:
--~--
:
:
:
--
--
:
--~--
:
--~--
--
:
--
--
--~--
--
--
--
--~--
--
--
--
--~--
--
27
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
28
Page
the video recorder timer
Programming
5
POWER
EJECT
Enter the start and end times
?
TV/ VCR
VCR
TV
For
use
the
can
6
CM SKIP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
:
:
:
:
:
:
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
be corrected with the "F" and "G"
Activate
or
"E" buttons
"
"
deactivate VPS with the
"D" and
cursor
(LV3797/LV3767).
symbol
will be
displayed
PR
ARD
on
the TV
screen.
P/STILL REC ITR
PLA
:
--
DATE
15
--
--
--
--
TIME
13
--
--
--
--
--
--
--
--
--
--
--
--
--
--
VPS/PDC
REW
TIME
15
--
TV
PROG.
STOP
programme times you must
DATE
--
buttons.
PROG.
LP
setting
Errors
MENU
CLEAR
PR
ARD
24 hour clock.
MUTE
?
CLK/CNT
the number
using
buttons.
:
:
:
:
:
:
:
:
00 ~14
: 00
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
ON
FF
7
Press G to select the
recording speed.
E to select the desired
tape speed (SP, IP,
IP mode determines how much
switches
speed
Press D
or
or
LP).
tape is left and
from SP to LP, if necessary, to
complete recording
the program.
(IP
PR
ARD
DATE
TIME
15
13
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
:
:
:
:
:
:
:
00 ~14
: 00
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
mode does
operate during VPS/PDC ON.)
not
VIDEO Plus+
8
Finish your timer
A
menu
displayed
on
If "PLEASE CHECK" is
entered
9
with the "i" button.
of the timer programmes set into the video
recorder will be
?
inputs
a
displayed,
screen.
you have
remove
the
menus
from the
screen.
10 Make
sure
that there is
a
video cassette in the
video recorder and switch the video recorder off
with the "POWER" button.
The timer set "TIMER"
symbol
is shown
on
the
video recorder.
NOTE:
Timer
28
recordings
do not work
during power on
DATE
15
TIME
13
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
:
:
:
:
:
:
00 ~14
: 00
:
--~--
:
--~--
:
--~--
:
--~--
mode.
:
--~--
DELETE:
wrong data. Please correct the data.
Press the "i" button to
TV
the TV
PR
ARD
,
--
--
--
--
--
LP
SP
SP
SP
SP
SP
1/21/03
FC999P/991SP_NA3GLL-Eng.
and
AM
29
Page
the video recorder timer
Programming
Checking
10:43
stored timer
clearing
programmes.
POWER
The stored timer programmes
TV screen, and
1
2
can
can
easily
be viewed
also be cleared if not wanted.
TV/ VCR
Press the "i" button and select "REC" with the
VCR
displayed
on
PROG.
the TV
screen.
PR
ARD
If you wish clear any of the programmes
cursor
"D" and "E"
on
TV
CLK/CNT
DATE
15
TIME
13
--
--
--
--
--
--
--
--
--
--
--
--
--
--
:
:
:
:
:
:
00 ~14
: 00
:
--~--
:
--~--
:
--~--
:
--~--
:
--~--
DELETE:
select it with the
MUTE
MENU
Press the "OK" button. The timer programmes list will
be
TV
cursor
"F" and "G" buttons.
--
3
EJECT
the
on
--
--
--
--
--
CLEAR
LP
CM SKIP
PROG.
SP
SP
SP
SP
SP
LP
,
STOP
REW
P/STILL REC ITR
PLA
FF
the list,
buttons, and
ez
POWER OFF
press the "F" button to clear.
If you wish
4
change
programmes
on
any of the data for any of the
the list, select it with the
cursor
"D"
and "E" buttons. Then, press the "OK" button and
change
the data
described
page.
Press the "i" button twice to
the TV
C.LOCK
on
VIDEO Plus+
previous
5
as
remove
the
menus
from
screen.
Overlapping timer programmes.
When timer programmes
already recording
Hence the
overlap,
15:30
continues to its scheduled end time.
beginning
of the second programme will not be
14:30
recorded.
NOTE
If you wish to
-
already
15:00
14:00
the programme which is
stop
a
timer
recording
PROGRAMME 1
which has
PROGRAMME 2
started, press the "POWER" button.
(This portion
Video
recorded)
Programme System (VPS) (LV3797/LV3767)
The Video
Programme System (VPS)
have
programmed
end,
even
for timer
if the actual
recording
broadcasting
or
programme is
interrupted,
for
signal
is broadcast
by
that the TV programmes that you
exactly
from their
beginning
to
time differs from the scheduled time due to
example,
interrupted automatically
The VPS
ensures
will be recorded
if the programme is extended
delayed start,
also be
will not be
if
beyond
a news
its scheduled time. Also, if
flash is inserted, the
recording
a
will
and resumed when the programme continues.
the TV station and this controls the timer in the video
recorder.
VPS should be set ON for all timer
signals.
broadcasting
***
recordings
It should be set OFF for all timer
these
from TV stations
recordings
broadcasting
from TV stations that
these
are
not
in the Netherlands,
can
signals.
The similar system PDC, which is used in the time
also be used with your
new
being
video recorder.
29
FC999P/991SP_NA3GLL-Eng.
1/21/03
10:43
AM
Page
30
Other features
Introduction
This video recorder has
convenient to
a
number of other features which make it easier and
Some of these
use.
are
described in this section of the manual. Later
sections describe the connection of the video recorder to other
features
relating
on
equipment,
and
the video recorder.
The features described here
1
more
The On Screen
are:
of the time
Display
and
operation
2
The
Digital Tape Counter
3
The
Memory Stop facility
or
tape counter, date, programme channel
mode of the vide recorder.
and
that
Remaining Tape
be used
can
Volume indicator.
rewind to stop the tape at
during
a
preset point.
30
4
The
5
The Automatic
6
Automatic
7
A Child Lock
8
The 16:9 wide-screen
9
Self-diagnosis.
tracking
control that
optimises
Playback facility
the
which
picture quality.
plays
back
a
tape, rewinds and ejects it
and switches off the video recorder.
Memory
Power Shut Off when
facility
so
a
video cassette is rewound.
that the video recorder
handset.
recording
and
playback.
can
be controlled
only
from the
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
31
Page
Other features
ON SCREEN DISPLAY OF THE TIME OR TAPE
COUNTER, REMAINING TAPE
PROGRAMME CHANNEL AND OPERATION MODE OF THE
VOLUME, DATE,
VCR RECORDER
CHANNEL
FUNCTION
PROGRAMME
VIDEO RECORDER.
When the "OK/CLK/CNT" button is
current time or the
day
pressed,
counter and the
tape
a
display
the TV
occurs on
of the
the date, year and
remaining tape volume,
of the week, the programme channel and the
screen
STOP
ARD
SP
mode of the video
operation
recorder.
The tape counter and the volume of the tape
loaded. After two seconds the clock
display
remaining
only
appear
tape remaining will only remain. If you press the "OK/CLK/CNT"
two seconds the clock
tape remaining
or
vice
display
from the TV
Note
If
-
onto the
versa.
a
tape is
WED
1. 01.03
to the
tape
once
again
within
counter and the volume of the
Press the "OK/CLK/CNT" button
is
taking place
these On Screen
again
to remove the
Clock/Tape
counter/Remaining
Tape Volume
DAY/MONTH/
YEAR/DAY OF
THE WEEK
will not be recorded
displays
tape.
Digital Tape Counter/Remaining Tape
Volume
POWER
The
Digital Tape Counter
screen
The
instead of the time
Digital Tape
Counter
and
at the
by repeatedly pressing
gives
you the relative
can
be
displayed
on
of
a
of
recordings
tape, you
can
on
EJECT
the TV
the "OK/CLK/CNT" button.
positions
beginning
of each separate
beginning
Volume
Remaining Tape
you set the counter to 0:00:00 at the
reading
TV/ VCR
VCR
TV
note the counter
MENU
PROG.
recording.
VOL
LP
a
tape when the tape
feature may be used to return the tape to
1
2
3
a
recording,
or
to
a
repeatedly playback
playback
or
recording,
of
portion
a
display
STOP
P/STILL REC ITR
counter is 0:00:00. This
preselected position immediately
Press the "OK/CLK/CNT" button to set the
Before
CM SKIP
PROG.
facility
Memory Stop automatically stops
TV
CLK/CNT
CLEAR
The memory stop
MUTE
the tape. If
To set the counter to M 0:00:00 press the "CLEAR" button.
making
11:00
screen.
recording
a
display changes
while
the tape counter and the volume of
or
after
REW
PLA
FF
tape.
a
to the counter.
press the "CLEAR" button. The counter will read
M 0:00:00.
Begin
the
playback
The tape counter
or
recording.
gives
the actual time in hours, minutes and seconds.
VIDEO Plus+
4
Press the "STOP" button when
5
Press the "REW" button. The tape will rewind and
playback
or
recording
is
completed.
automatically stop
when the
counter returns to M 0:00:00.
31
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
32
Page
Other features
Tracking Controls
POWER
EJECT
Tracking
TV/ VCR
VCR
TV
MUTE
distortions show up
set the
can
with the
TV
will be
tracking
CM SKIP
PROG.
LP
STOP
P/STILL REC ITR
REW
PLA
FF
also set the
picture.
This video recorder
tracking manually
if you need
to remove
can
them
You
tracking
adjust
the
switch
by pressing
will
quality
of the
distortions
the
you start to
recording
tracking
playback
to
a
playback
tape the
a
tape
tracking
is poor,
correctly.
or
if the
In these
tapes
cases
are
damaged,
you will have
manually.
tracking during playback
with the
cursor
"D" and "E" buttons. Press
until the distortions have been eliminated.
on
the automatic
tracking again
the "0" button. When you
Automatic
Automatic
tracking adjusts
soon as
will not be able to work
be switched
always
occurs
If the
-
tracking
repeatedly
can
As
if necessary.
tracking
the automatic
You
The automatic
-
optimum picture quality.
adjusted
Manual
CLEAR
unstable
or an
can
to do so.
Automatic
PROG.
You
tracking automatically.
MENU
CLK/CNT
streaks
as
change
a
after
using
the manual
tracking
video cassette, the automatic
feature
tracking
again.
on
Playback
Playback
is
a
very convenient automatic action of this video recorder. It
whenever you insert into the video recorder
a
video cassette from which the
VIDEO Plus+
safety
tab has been removed
Automatic
It
Playback
a
carries out the
switches
automatically
(e.g.
on
video cassette which you have
hired).
following procedures:
the video recorder's power and starts to
playback
the
tape.
At the end of the
The tape is
tape, it automatically rewinds.
ejected automatically.
The video recorder switches itself off.
Automatic
Memory
Power Shut-Off
This feature of the video recorder enables you to initiate
recorder
during tape
before you
can
switching
rewind. Hence you do not have to wait until
a
off the video
tape has rewound
switch the video recorder off.
To activate Automatic
Memory
Power Shut Off press the "POWER" button
rewind. The tape will rewind to the
beginning
during tape
and the video recorder will switch itself
off.
32
(e.g. "POWER"
Pressing
any of the control buttons
Memory
Power Shut Off will cancel it.
or
"PLAY")
after
setting
Automatic
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
33
Page
Other features
The Child Lock
The control buttons
recorder
1
on
only
inoperative.
are
on
will flicker in your video recorder's
few seconds.
on
display
The video recorder
If any buttons
the front of your VCR
video recorder's
display
To switch off the
and
locking,
can
the TV
on
Compatibility (Wide
This video recorder
pressed
for
screen
a
display
for
a
screen.
are
be controlled
are
ez
POWER OFF
SAFE
inoperative (except
only
for
from the handset.
VIDEO Plus+
SAFE will appear in your
few seconds.
again.
few seconds.
TV)
screen
-
be recorded and
can
a
press the "C.LOCK" button
OFF will flicker in your video recorder's
16:9
for
the TV
the front of the video recorder
"STOP/EJECT").
on
The video
from the handset.
Press the "C.LOCK" button. SAFE will appear
The control buttons
2
the front of the video recorder
be controlled
can
back the 16:9 wide aspect ratio
played
programmes.
Select the
required position
To record in
a
in the main
menu as
described
wide-screen format, you have to set to "16:9",
Wide
page 11:
on
or
-
screen
TV
if you set to "4:3" the
video recorder will be recorded in normal format.
When you set to "AUTO", the video recorder will be
wide-screen programmes
as
automatically played
wide, the normal programmes
as
back the
normal.
E
A
NE
EURO AVZ
AUDIO
DECODER
SO
UT
AERIAL
G
SORTIE
ANTENNE
EURO AV1
AUEIO/
VIDEO
D
R
RF.OUT
NOTE:
When the
picture disappears
programme
or
recording
on
the TV
screen
while
playing
back
16:9
a
in 16:9 format, set the TV to "AV" mode.
Self-Diagnosis
This function informs you of
1
Press the "i" button
TV
on
an error
messages for
solving
the
the remote control handset. The
problems
menu
more
easily.
will appear
on
the
screen.
VCR
2
Select "Dr." with the
3
Check
cursor "F"
and "G" buttons and press the "OK" button.
Dr.
VIDEO DOCTOR
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
a
problem
with the
cursor
"D" and "E" buttons.
NEXT TIMER PROGRAMME
OK
i
Menu of Video Doctor
HEAD STATUS
Status of
Display
Solution & Information
PLEASE CLEAN
NOT RECORDABLE
Clean your video heads
Insert a tape with its
protection tab in place
NO.OF TIMER
PROGRAMME
1
Shows the number of timer
NEXT TIMER PROGRAMME
ARD 26 10:00~11:00
TAPE STATUS
recording
SP
Shows the status of
current timer
4
recording
Press the "i" button.
33
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
34
Page
The Hi-Fi stereo sound
system
Introduction
This video recorder will record and
playback
several
and
possible
ways of
recording
Hi-Fi stereo sound. There are, therefore,
playing
back the sound. These
described
are
below.
The audio tracks
AUDIO TRACKS
TYPE OF
BROADCAST
STEREO
BILINGUAL
MONO
MONO
Hi-Fi TRACKS
Video cassette tapes recorded
on
this video recorder will have
a
normal
track and two VHS Hi-Fi stereo audio tracks. These allow you to make audio
TRACK L-CH
R-CH
in Hi-Fi stereo
L+R-CH L-CH
R-CH
disc
L-CH
L-CH
R-CH
(Main)
(Main)
(Sub)
MONO
MONO MONO
or
Using
sound
or
mode from
bilingual
a
TV broadcast,
your video recorder in combination with
recordings
system,
a
video
quality
a
Hi-Fi audio
mode will
display
automatically
mono
mono
STEREO
be recorded
on
on
the TV
screen.
being
transmitted in stereo sound
During recording
stereo sound will
the Hi-Fi stereo tracks of the video tape, and in
mono on
track.
BILINGUAL AUDIO RECORDING- A TV broadcast
sound will
recorded
system will enhance the
of video tapes.
STEREO AUDIO RECORDING- A TV broadcast
display
on
be recorded
BIL
the TV
on
being
transmitted in
Both audio channels will
screen.
bilingual
the
mono
(left)
will
track.
during playback
The audio output mode
during playback
The choice is STEREO, LEFT
Note- that whilst
be
automatically
the Hi-Fi stereo tracks of the video tape, and the main channel
on
Audio output
mono
stereo audio
another video recorder.
Stereo, bilingual,
the
a
audio
mono
adjusting
is that chosen "AUDIO" in the main
RIGHT
(left channel),
the auto
tracking
(right channel)
or
menu.
MONO.
control Hi-Fi stereo sound may revert to
sound
BILINGUAL AUDIO OUTPUT
-
If the audio
output is bilingual the primary language is
output from the left channel, and the secondary language is output simultaneously
from the
right
channel when the audio
setting
is STEREO. The
output from both channels when the audio setting is MONO.
34
primary language
is
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
from another
Recording
VIDEO IN
FM
AM
Page
35
equipment
L- AUDIO IN -R
AM
300?y
FM
RL
75y
To AUDIO IN
(L/R)
To AUDIO OUT
(L/R)
Simulcast stereo
recording and playback Recording
Some TV programmes is also broadcast in stereo sound on FM radio. For these
can record the picture from the TV programme, and the
simulcast broadcasts you
sound from your audio system
as
follows:
Connect your audio system to the "AUDIO IN
recorder.
1
Select "SC" mode with the "AV" button
2
3
4
5
on
(L/R)"
on
the front of the video
the remote control handset.
Select the programme to be recorded with the handset.
your audio system and tune in to the sound broadcast.
Turn
on
Start
recording.
NOTE:
The Simulcast Stereo audio will be recorded
The Normal
(Mono)
on
the Hi-Fi Audio tracks.
audio track will record the TV programme FM
mono
sound.
PLAYBACK
You
play back the stereo sound through
through your audio system, connect it
can
sound
a
back of the video recorder. Turn off the sound
E
playback
on
AERIAL
NE
AUDIO
SORTIE
the stereo
your TV set.
E
AN
EURO AVZ
DECODER
stereo TV set. To
to the "AUDIO OUT" terminals on the
AUDIO OUT
EURO AV1
OUT
R
AERIAL
L
RF. OUT
L
SORTIE
G
ANTENNE
EURO AV1
AUEIO/
VIDEO
R
D
RF.OUT
Recording
1
from
a
second video recorder
A second video recorder
IN
(L/R)"
EURO SCART sockets
2
3
4
The
(for tape copying)
and VIDEO IN terminals
appropriate
on
should be connected to the "AUDIO
the front of the video recorder
Start
recording
or one
of the
the back.
audio/video mode should be set with the "AV" button.
Insert an empty cassette into this video recorder, and if you
tape insert it into the second video recorder.
on
this video recorder, and if
appropriate,
are
the
copying
playback
another
at the
second video recorder.
NOTE
-
Unauthorised
recording
of
cassette and other materials may
be
on
(for tape copying)
contrary
to
copyrighted TV programmes, films video
infringe the rights of copyright owners and
copyright laws.
35
1/21/03
FC999P/991SP_NA3GLL-Eng.
10:43
AM
Page
(easy) operations
ez
ez
POWER
EJECT
TV/ VCR
VCR
TV
MUTE
MENU
36
(easy)
power off
The sequence of "Stop
Rewind
by pressing ez POWER OFF.
1
2
During play
back press
Your VCR will be
ez
Eject
Power Off
CLEAR
operated automatically
operated
as
the
following;
REWIND
POWER
EJECT
OFF
CM SKIP
ez
PROG.
LP
STOP
TV
is
POWER OFF.
PROG.
CLK/CNT
"
STOP
P/STILL REC ITR
(easy) repeat
By pressing & holding
automatically.
ez
REPEAT
during play back,
the
holding
section is
replayed
twice
REW
PLA
FF
1
2
3
4
5
VIDEO Plus+
36
During play back,
press & hold
ez
REPEAT at the
point
where repeat
play
be concluded.
Then, your VCR will go into
Release
The
ez
holding
Pressing
ez
REPEAT at the
reverse
point
search.
where repeat
section is
replayed
twice
REPEAT
again during repeat play,
play
is to start.
automatically.
will return to normal
play.
is to
FC999P/991SP_NA3GLL-Eng.
1/21/03
Controlling
the TV
Your remote control is
LG TV.
capable
of
10:43
operating
AM
37
Page
your VCR
as
well
as
limited functions of
Follow the instructions below to operate for your LG TV.
Before
1
to be
using
the remote control, press the VCR
TV button to select the device
POWER
EJECT
operated.
To switch the remote control mode
2
or
press the VCR
or
The POWER,
PROG.(D/E), VOL(F/G),
control
are
device),
be
MUTE and TV AV buttons
on
(to operate
a
different
sure
to
TV/ VCR
VCR
TV
MUTE
TV button first.
MENU
activated for
controlling LG
remote
PROG.
TV.
TV
CLK/CNT
VOL
Setting
O
CLEAR
Remote Control Codes for LG TV
CM SKIP
PROG.
This remote control supports two remote control codes for LG TV: Code 1 and Code
LP
STOP
P/STILL REC ITR
2.
REW
O
When the unit is
shipped
If your LG TV is not
O
from the
operated,
factory,
FF
set the remote control to Code 2.
To set the remote control to Code 2, hold down both the TV button and "2" number
button
on
the remote control.
(If
the batteries in the remote control
the remote control is set to Code 2, the
O
PLA
the remote control is set to Code 1.
setting
will revert Code
are
replaced
while
1.)
To set the remote control back to Code 1, hold down both the TV button and "1"
number button
on
the remote control.
VIDEO Plus+
Note
code
-
If the remote control does not
or use
Due to the
the remote control
variety
operate your particular TV, try
originally supplied
of codes used
one
of the other
with the LG TV.
by manufacturer, OUR COMPANY
cannot
guarantee
that the remote control will operate every model of the LG TV.
37
FC999P/991SP_NA3GLL-Eng.
1/21/03
10:43
AM
38
Page
Specifications
General
Power
:
200-240V~,50Hz.
consumption
:
Approx.
Video Head system
:
Double azimuth 4 heads, helical
scanning system
Tape speed
:
23.39 mm/sec
mm/sec
:
Tape
:
4 hours in SP mode/8 hours in LP mode
Power
Tape
format
Maximum
recording
time
(with
12 watts
(SP mode)/11.69
width 1/2"
E-240
mode: 3
(Energy saving
(12.7
mm
watts)
(LP mode)
high density VHS tape)
tape)
Rewind time
:
Approx. 65(±10)
Dimensions(WXHXD)
:
14.2"X3.7"X11.8"(360X94X272mm)
Weight
:
3.4kg
Operating temperature
:
41°F-95°F
Operating humidity
:
Lessthan80%
Timer
:
24 hours
:
CCIR standard
sec.
E-180
(with
tape)
(5°C-35°C)
display type
Video
Television system
SECAM
Recording
RF
format
reception
RF OUT
Input
level
level
PAL/MESECAM
:
PAL
:
PALG
:
VIDEO IN
:
to noise ratio
RF modulator
50
fields)
PAL
(B/G),
signal
B/G, SECAM B/G
(SCART, RCA type)
Vp-p,
75 ohm, unbalanced
VIDEO OUT
1.0
Signal
colour
:
1.0
Output
(B/G)
(625 lines,
(SCART type)
Vp-p,
75 ohm, unbalanced
:
More than 43 dBm
:
UHF channels 22-68
:
AUDIO IN
(Adjustable)
Audio
Input
level
(SCART, RCA type)
Scart type: -6.0 dBm,
RCA type: -6.0 dBm,
Output
level
:
AUDIO OUT
more
more
than 10 kΩ
than 47 kΩ
(SCART, RCA type)
Scart type: -6.0 dBm, less than 1 kΩ
RCA type: -6.0 dBm, less than 1 kΩ
Audio track
Audio
frequency
response
:
Mono track & Hi-Fi track
:
Normal:100 Hz-10 kHz
Hi-Fi: 20 Hz-20 kHz
Audio
Audio
signal
dynamic
Design
38
to noise ratio
and
range
:
:
specifications
(-6/+3 dBm)
(-3/+3 dBm)
Normal audio: More than 43 dB
(at SP mode)
Hi-Fi audio: More than 70 dB
(at SP mode)
Hi-Fi audio: More than 85 dB
(at SP mode)
are
subject
to
change
without notice!
FC999P/991SP_NA3GLL-Eng.
Before
1/21/03
calling
Please check to
see
described here before
10:43
AM
39
Page
for service...
if any
problem which you may
taking it for service or calling a
have with your video recorder is
service
engineer.
Problem
Possible solution?
No mains power to the recorder
?
Is the video recorder
plugged
into the
mains?
?
Is the mains
supply
on
and switched
on?
TV programmes cannot be recorded
?
Can you get
a
picture
on
the TV
screen?
?
If
not the aerial and RF lead
are
connected?
?
Are the TV channels
?
Has the
safety
properly
tuned in?
tab been removed from
the video cassette to prevent
A timer
recording
does not take
place
?
?
?
recording?
off?(Is the "TIMER" showing
in the display?)
Were the recording start and end times
set correctly?
Are the timer settings in the timer
Is POWER
menu?
?
Was the power
interrupted
after
setting
the timer?
If
so
AUTO PLAY does not work
?
setting will be erased
recordings will not take place.
the time
timer
Has the
safety
and
tab been removed from
the video cassette?
There is
noisy
picture
streaky
no
and
on
playback,
or
it is
?
Are the TV channels
properly
tuned in?
another video cassette.
?
Try
?
Can you minimise the noise bars to an
acceptable level with the "0" or "D" and
"E" buttons?
The top of the
playback picture
is
?
unstable
?
Is the video cassette
Try another
Adjust the
damaged?
one.
horizontal hold control
on
you TV set.
?
Insure that you
channel
or
Video cassettes cannot be inserted
No Hi-Fi sound
on
are
using the "video"
example 0, 8, 9
your TV set
12.
?
Is the cassette compartment
?
Are you
?
trying
empty?
to insert the cassette the
right way round?
Switch "AUDIO" in the main
menu
to
"STEREO".
Video Head
?
?
?
Cleaning
Dirt
accumulating on the head after a long period of time can cause the playback
picture to become blurred or broken up.
High quality video cassette tapes will not normally deposit dirt onto the video head,
but old or damaged tapes might.
Clean the video heads with a commercially available video heads cleaning tape.
39
FC999P/991SP_NA3GLL-Eng.
1/21/03
10:43
AM
Page
40
LG Electronics Deutschland GmbH
Jakob-Kaiser-Straße 12
Postfach 244, 47877 Willich
Telefon: 02154 / 492-0, Telefax: 02154 / 428799
Internet:
P/N:3834RP0088E
www.lge.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising