DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : V8705DS/V8705DB PAL Before connecting, operating or adjusting this product, carefully and read this instruction booklet please completely. CAUTION To reduce the risk of electric Warning: shock, do of this not iceable the remove product. There parts inside. Refer servicing qualified service Warning: To reduce the risk of fire shock, do product to or to personnel. electric rain, back cover or are no user-serv- or not expose this dripping SERIAL NUMBER: splashing water, not place objects or moisture. Do filled with water such as vases, on CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS ECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. the product. You can find the serial number on the back of the unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. ______________________________ ______________________________ Date of Purchase_________________________ Warning: This digital video disc player employs a laser system. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. Features: ? Complete versatility or VHS Tapes. ? Watch ? ? Warning: To prevent direct exposure to laser beam, do not open the enclosure. Visible laser radiation when open. Never stare laser beam. Warning: directly ? a confined space such similar unit. as a product book in a case or Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 2 TV show to the VCR. (unless DVD is copy protected notes on controlling this unit This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. on a Hi-Fi Stereo VCR. uses one set of controls to DVD and VCR. The operate both following buttons successfully controlling each part. 1. Notes recording Records from DVD to VHS with Macrovision). Important into the play DVD, DivX, VCDs, audio CDs Remote controls both DVD and VCR decks. This unit Caution: Do not install this DVD while to are helpful POWER Button Press the POWER button or front panel on the remote control to turn on this unit. 2. DVD Button 3. you want to control the DVD. VCR Button Press DVD button on Press the VCR button the remote control when on the remote control when you want to control the VCR. The VCR indicator will light on the front display 4. in panel to show that the VCR is selected. DVD/VCR Button Press the DVD/VCR button toggle on the front panel control between the DVD and the VCR. to Contents PlayingaDVDorVideoCD...............27-29 Introduction...................4 SymbolUsedinthisManual...............4 AbouttheSymbolDisplay..............4 NotesonDiscs..........................4 HandlingDiscs........................4 StoringDiscs.........................4 CleaningDiscs........................4 TypesofPlayableDiscs...................5 Regionalcode..........................5 Disc-relatedterms.......................6 FrontPanel.............................7 DisplayWindow.........................7 RemoteControl.........................8 RearPanel.............................9 GeneralFeatures.......................27 MovingtoanotherTITLE...............27 .27 Moving to another CHAPTER/TRACK . . . . . Search.............................27 ChangingtheAudioChannel Still Picture and Frame-by-Frame Playback . . . . . . . . . . . . .27 .28 SlowMotion.........................28 Random............................28 RepeatA-B..........................28 Repeat.............................28 3DSurround.........................28 TimeSearch.........................28 Zoom..............................29 MarkerSearch.......................29 SpecialDVDFeatures...................29 TitleMenu..........................29 DiscMenu..........................29 InstallationandSetup . . . . . . . . .10 . CameraAngle.......................29 .29 ChangingtheAudioLanguage . Connecting to a TV & Decoder (or Satellite) .10 .11 Connecting to Optional Equipment .12-16 BeforeOperation-VCRpart. .12 Tuning in a video channel on your TV Initialpreset........................12 .13 SettingtheclockManually. Tosetthecoloursystem..............13 .14 Howtousingthemainmenu. .14 Tuning in TV Stations Automatically .15 TuninginTVStationsManually. .16 Changing the order of TV Stations DeletingTVstations..................16 .17-21 BeforeOperation-DVDpart. On-ScreenDisplay......................17 InitialSettings.......................18-21 GeneralOperation....................18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LANGUAGE.........................18 MenuLanguage....................18 DiscAudio/Subtitle/Menu. .18 DISPLAY...........................19 . . . . . . . . . . TVAspect.........................19 DisplayMode......................19 ProgressiveScan...................19 TVOutputSelect....................19 AUDIO.............................20 .20 .20 .20 Vocal.............................20 DolbyDigital/DTS/MPEG. SampleFreq.(Frequency) DynamicRangeControl(DRC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . AutoPlay..........................21 DivX(R)VOD.......................21 LOCK(ParentalControl)................22 Rating............................22 .22 Password(SecurityCode). CountryCode......................22 . . . . . . . . . . . Operation....................23 Playingatape..........................23 .23 CM(CommercialMessage)Skip OPR (Optimum Picture Response) .23 .24 InstantTimerRecording(ITR). ShowViewProgramming.................25 Timer recording using On Screen Display .26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 PlayinganAudioCDorMP3/WMADisc AudioCDandMP3/WMADiscFeatures .31 Pause..............................31 . . . . . . . . . . . MovingtoanotherTrack................31 RepeatTrack/All/Off...................31 Search.............................31 Random............................31 RepeatA-B..........................31 3DSurround.........................31 ProgrammedPlayback.....................32 .32 RepeatProgrammedTracks. .32 ErasingaTrackfromProgramList .32 Erasing the Complete Program List ViewingaJPEGDisc......................33 . . . . . . . . . . . . . . . . . . . . . . . . . SlideShow..........................33 StillPicture..........................33 MovingtoanotherFile.................33 Zoom..............................33 Torotatepicture......................33 To listen to MP3/WMA music watching picture .33 .34 PlayingaDVDVRformatDisc. . . . . . . . . . . . . . MaintenanceandService.................34 PlayingaDivXMovieDisc................35 Additional Features-VCR part . . . . . . . . . .36-37 . OnScreenDisplay....................36 TapeCounterMemoryStop.............36 Lock(ChildLock).....................36 .36 VideoDoctor(Self-Diagnosis). Hi-FiStereoSoundSystem.............37 .37 WideScreenCompatibility16:9 . OTHERS...........................21 PBC.............................21 . Subtitles............................29 . . . . . . . . . . . . . . . . . . Tosetthedecoder....................37 AdditionalFeatures.....................38 LastSceneMemory...................38 ScreenSaver........................38 VideoModeSetting...................38 Controlling other TVs with the remote control 38 CopyingfromDVDToVCR...............39 .39 Recording from another video recorder . . . . Reference....................40 LanguageCodes.......................40 CountryCodes.........................40 Troubleshooting........................41 Specification..........................42 3 Introduction About the To proper use of this product, please read this owner's manual carefully and retain for future Symbol Display ensure reference. " " may appear on your TV display during and indicates that the function explained in operation this owner's manual is not available This manual provides information on the operation on that specific DVD video disc. and maintenance of your DVD player. Should the unit require service, contact an authorized service location. Notes Symbol Used in this Manual on Handling The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of Discs Discs Do not touch the the disc on by the playback side of the disc. Hold edges so that fingerprints do not get the surface. Never stick paper or tape on the disc. electric shock. The exclamation point alerts you to the presence of important operating and maintenance / servicing instructions. Indicates hazards unit itself or likely to cause harm to the other material damage. Note: Indicates special notes and operating features. Tip: Indicates tips and hints for making the task easier. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. A section whose title has is applicable only symbol. DVD DVD and finalized DVD±R/RW VCD Video CDs CD Audio CDs MP3 MP3 Discs WMA WMA Discs JPEG JPEG Discs DivX 4 to the disc of the following symbols represented by the one DivX Discs Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. Types of Playable Discs Regional code This DVD player is designed and playback of region DVD manufactured for (8cm/12cmdisc) encoded DVD software. This unit only Video CD (VCD) (8cm/12cmdisc) DVD discs labeled "2" Notes Audio CD ? (8cm/12cmdisc) on Regional play clearly a globe visible on with the one or more cover. This number must match your DVD code or the disc cannot play. In addition, this unit plays DivX file, DVD -R, DVD +R, ? DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CD-RW that contains audio titles, MP3, WMA, and/or JPEG files. This indicates 2 "ALL". Codes Most DVD discs have numbers in it or "2" can player's regional If you try to play a DVD with a different region code from your player, the message "Check Regional Code" appears on the TV screen. product feature that is capable playing DVD-RW discs recorded with Video Recording format. a of Notes: ? ? ? Depending on the conditions of the recording equipment or the CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) disc itself, some CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot be played on the unit. Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal) since they may (the result in malfunctions. Notes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally programmed by software manufacturers. This unit plays DVDs and Video CDs according to disc content manufacturer, therefore designed by the software playback features may some not be available or other functions may be added. Manufactured under license from Dolby "Dolby", "Pro Logic", and the symbol are trademarks of Dolby Laboratories. double-D Laboratories. DTS and DTS Digital Digital Out Systems, Theater are trademarks of Inc. 5 PBC: Playback Control (Video CD only) Playback control is available for Video CD (VCD) Disc-related terms DVD±R/DVD±RW DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. are only two standards for meaning the DVD content can be Single-sided discs can hold re-writable media, erased and re-recorded. 4.38 Gigabytes and double-sided discs hold twice as version 2.0 disc formats. PBC allows you to interact with the system via menus, search functions, or other typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) operate in the same way as audio CDs. discs. (DVD video discs only) generally a distinct section of a DVD disc. For example the main feature could be title 1, a documentary describing how the film was made could be title 2, VCD and cast interviews could be title 3. Each title is much. There are no dual sided recordable layer single (Video CD) A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB disc) of MPEG-1 full-motion video along with Title A title is assigned easily. a reference number enabling stereo sound. quality Chapter (DVD video discs only) chapter is a segment of a title such MPEG A MPEG is an you to locate it international standard for video and audio compression. MPEG-1 is used in encoding video for VCD and provides for multichannel surround sound coding such as PCM, Dolby Digital, DTS and MPEG film interview in series. Each as a scene in a is chapter assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters or one a may not be recorded. audio. Scene MP3 On MP3 is audio popular compression format used for digital files that yields very high near-CD quality. a WMA Windows media audio file. A type of developed by Microsoft Corp. coding / decoding (VCD) video CD with PBC (playback control) functions, pictures are divided into sections called "scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks. a moving pictures and still Track JPEG A distinct element of audiovisual information, such Expert Group. JPEG is a compressed that allows you to save images with no limit Joint Pictures file format on the number of colors. as the picture or sound track for a specific language (DVD), or a musical piece on a video or audio CD. Each track is assigned a track number, enabling you to locate the track you want. DVD discs allow one DivX track of video DivX is the of name which is based on a revolutionary the new MPEG-4 new compression play DivX standard for video.You will be able to movies 6 using this DVD player. video codec of audio. (with multiple angles) and several tracks Front Panel POWER Tape Eject Switches the unit to ON OFF. or Reverse Go to Skip/Scan, Rewind ( ) beginning of current chapter/track or Press and hold for two seconds for a fast to PREVIOUS reverse chapter/track. search. Rewinds the tape. Forward Skip/Scan, Fast-Forward ( chapter/track. ) Go to NEXT Press and hold for two seconds for a fast forward search. Winds the tape forwards. STOP ( A ) Stops playback. Disc Tray Insert a disc here. PAUSE/STEP Pause press ( / ) playback temporarily / repeatedly for frame-by-frame playback. DVD/VCR Selector VCR Record DVD OPEN/CLOSE Opens or ( ) Tape Compartment closes the disc tray. EJECT COPY PROG. DVD/VCR DVD to VCR Copy Display Button ( G) Starts playback. (L/R) Jacks Shows the current status of the unit. PLAY Display Audio IN window Video IN Jack Remote Sensor Channel Point the remote control here. Programme Selectors. Window Indicates current title number Programmed playback CHPTRK Indicates current chapter or track number A disc is loaded in the DVD deck. (Lights when a disc is loaded in the DVD deck and flashes when no disc is loaded.) active. Indicates repeat mode. Bilingual Video CD is inserted. mode Indicates total VCR deck is selected. playing time/elapsed The current TV show or time/current time video is broadcast in stereo DVD to VCR copy is in progress DVD disc is inserted. VCR recording is engaged The Hi-Fi track of Audio CD VHS tape is is inserted. WMA disc is a playing Cassette-In indicator inserted. A timer MP3 disc is is inserted. recording programmed or in progress Indicates TV mode. (See Notes on page 24.) PROG VCR VCD TITLE CHPTRK BIL STEREO COPY DVD RPT ALL AB TV Hi-Fi Child Lock is engaged P/SCAN Indicates the Progressive Scan is set to On mode. 7 Remote Control POWER Switch this unit ON OPEN/CLOSE EJECT Open or close the disc OFF. or DVD/VCR select button operational mode of remote control. Selects - Select input into tape. (see picture PAUSE/STEP ( ) playback temporarily / press repeatedly for frame-by-frame playback. PLAY (G) Starts playback. STOP(A)? Stops playback. ? Access ? ? ? ? ENTER/OK selection. DISC MENU a DVD disc. video CD language (DVD). subtitle language. camera angle if available ZOOM video image. LOCK input sources (Child Lock) on into tape. and off. TITLE menu of the disc if PROGRAM Access or remove program menu. ? MARKER Mark any point during playback. ? ? Repeat sequence. recording speed of ? the tape. RANDOM/CM SKIP ? Play tracks in random order. CM SKIP SHOWVIEW ? To display the programme menu for ShowView programming. SEARCH MARKER SEARCH Display ? - menu. CLEAR Clear a track number on the program menu or a mark on the MARKER SEARCH menu. Reset tape counter to zero. ? REPEAT Repeat chapter, track, title, all. - - - *? Feature is not available. Remote control Operation sensor battery installation and Detach the press the buttons. battery cover on the rear of the remote control, and insert two batnew batteries and different types of batteries such 8 a Display the title available. menu * alkaline, etc. audio Switch the Child Lock - Do not mix old and a REC/ITR Record your - Point the remote control at the remote of ? PR/TRK(+/-) Remote Control menu ANGLE Enlarge menu Select channel programme of VCR. To adjust tracking. To control vertical tremble during picture still. Select the an Select DVD ? FGDE(left/right/up/down) - menu. SUBTITLE Select ? counter. A-B/LP setup AUDIO Select Access the On-Screen Display. Shows you the current time or - or remove Displays the with PBC. DISPLAY CLK/CNT of off TV sound. RETURN ? menu on or SETUP/ i Pause Access source. SKIP(./>) Go to next chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track. search. Acknowledge off the TV. on or Adjusts TV's volume. MUTE: Turns - - 38) TV VOL +/--: or item in the recording TV PR +/--: Selects TV's channel. forward. VCR: Rewinds the tape during the STOP mode, for fast reverse picture search and Advances the tape during an for TV AV: Selects the TV's (m/M) Select p. TV POWER: Turns BACKWARD / FORWARD the STOP mode, fast forward source TV Control Buttons TV/VCR Switch between your TV's tuner and the VCR's internal tuner. DVD: Search backward Tape Eject. AV 0-9 numerical buttons Select numbered items in a menu. - tray. - as never standard, mix AAA AAA teries (size AAA) aligned correctly. with and Rear Panel VIDEO/AUDIO Connect to a OUT(Left/Right) (DVD/VCR OUT) inputs. TV with video and audio COMPONENT/PROGRESSIVE SCAN VIDEO OUT (DVD EXCLUSIVE Connect to a TV with Y Pb Pr AERIAL AUDIO OUT Connect the aerial Connect to using this (Y Pb Pr) OUT) inputs. (Left/Right) (DVD EXCLUSIVE OUT) amplifier, receiver or stereo system. an EURO AV2 DECODER jack. Connect to pay-TV decoder or another video recorder. OPTICAL (Digital audio out jack) digital (optical) audio equipment. Connect to S-VIDEO OUT Connect to EURO AV1 AUDIO/VIDEO Connect to your TV set COAXIAL a (VCR or (DVD EXCLUSIVE TV with S-Video IN+OUT / DVD OUT) input. OUT) another video recorder. (Digital audio out jack) (DVD EXCLUSIVE OUT) digital (coaxial) audio equipment. Connect to RF.OUT (DVD/VCR OUT) using this jack. Connect to your TV AC Power Cord Connect to a power source. Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 9 Installation and Setup If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. 1. Please refer to the manuals of your TV, Stereo or other devices as necessary to make the best connections. Connect the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable. 2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables. System For better sound reproduction, connect this unit's AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See "Connecting to optional equipment" on page 11. Caution: Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel. Do not connect this unit's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Connecting to (or Satellite) a TV & Decoder Make one of the following connections, depending the capabilities of your existing equipment. on You must set the "TV Output Select" option to use COMPONENT/PROGRESSIVE SCAN VIDEO OUT and SCART jacks. (See "TV Output Select" on page 19.) Basic connection 1. 2. 2. Set the Progressive to "On" on the setup menu for progressive signal, see page 19. Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. 2) Press STOP and hold it for five seconds before releasing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack) or S-VIDEO connection. Rear of this unit (DVD exclusive out connection) (AV) (RF) Connect the RF antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of this unit. Connect the supplied RF antenna cable from the RF.OUT jack on the rear panel of this unit to your television's Antenna Input. Component 2. Player. Notes: Rear of TV AERIAL DVD exclusive out connection 1. the DVD on Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this unit to the SCART input socket on the TV using a SCART lead. Some TV broadcasters transmit encoded television signals which you can only see with a purchased or rented decoder. You can connect such a decoder (descrambler) to this unit. Basic connection 1. Progressive Scan Video VIDEO INPUT COMPONENT VIDEO INPUT/ PROGRESSIVE SCAN Pr (Color Stream ) Pb Y AUDIO INPUT L SCART INPUT S- UT R connection Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables. Decoder (or Satellite) S-Video connection 1. 2. Connect the S-VIDEO OUT jack on this unit to the S-Video input jack on the TV using the S-Video cable. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables. Progressive Scan (ColorStream Pro) If your television is a high-definition or connection "digital ready" television, you may take advantage of the DVD Player's progressive scan output for the highest video resolution 10 possible. Rear of this unit (Basic connection) Note: If the TV has an S-video input, connect the DVD player with the S-video cable. When using an S-video cable, do not connect the yellow video cable. Connecting Optional Equipment to Connecting to an amplifier equipped with channel analog stereo or Dolby Pro Logic II/Pro Logic two Connect the Left and Right AUDIO OUT jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables. Notes: If the audio format of the the capabilities of produce a strong, To see digital output does not match your receiver, the receiver will distorted sound or no sound at all. the audio format of the current DVD in the On-Screen Display, press AUDIO. Connecting to an amplifier equipped with two digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2 or DTS) channel 1. 2. Connect this unit's DIGITAL AUDIO OUT jack (OPTICAL or COAXIAL) to the corresponding jack on your amplifier. Use an optional digital (optical or coaxial) audio cable. You will need to activate this unit's (See "AUDIO" Digital on InstaliodSeup in digital output. 20). page Multi-channel sound A digital multi-channel sound quality. For this connection provides the best you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Warning: Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected. Rear of this unit 2 channel analog stereo or Pro Dolby Logic II/Pro Logic connection. DVD exclusive out DVD/VCR OUT Digital COAXIAL DIGITAL INPUT multi-channel connection L (DVD exclusive out connecttion) R OPTICAL AUDIO INPUT DIGITAL INPUT Amplifier (Receiver) 11 Before in your TV Tuning a Operation-VCR part video channel 7. on Press PROG. 3 or 4 to select another video channel. You may select any channel number between 22 and 68. Notes: The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 is already used by another TV station, or if the picture is distorted, you can change the transmitter channel of your VCR. Stages 5 8 will show you how to change the output frequency of your VCR. can also set it to "OFF" if there is any interference when your TV is connected to the VCR with a SCART lead. You 8. Select a TV channel number on which you wish to watch video's. ~ Your TV receives signals from the video recorder (VCR) like another TV station. You have to select a channel number on your TV and tune it in so that you may watch video tapes. If you have used a SCART or AUDIO and VIDEO cables then your TV should already have a dedicated video channel built into it, usually called AV. I on the front of your VCR when you Press have finished. Tune this channel so appears. Store this channel on that a bright blue screen your TV. Note: Make sure VCR and that you have correctly installed your successfully tuned in a dedicated on your TV. If you do not tune in a dedicated video channel on your TV you will be unable to view and record video tapes! video channel 1. Make sure that you have correctly installed your VCR as described earlier in this book. Press POWER to turn on your VCR. Turn on your TV. 2. Insert a pre-recorded video tape into your VCR and press PLAY on the remote control. Select a TV channel number on which you wish to watch video's. Don't worry if you don't have a video-tape to play at this stage! If you switch your VCR on and continue stages 3 4, instead of seeing video playback tune your TV until you see a bright blue ~ screen. 3. 4. 5. Tune this channel until the video picture is sharp and the sound is clear. If you have used a SCART or AUDIO and VIDEO cables you will not have to tune your TV, simply select the AV channel. The AV channel is already pre-tuned for optimum video playback on your TV. Initial preset For the following steps we do assume that you have connected your video recorder for the very first time. In this case the video recorder is on after mains just connection. You should not touch any buttons yet. On the connected TV you will Note - If this 1. does menu recorder was now see. not appear, your video programmed already. Select the country F andG. according to your area with "A": Austria, "B": Belgium, "CH": Switzerland, "D": Germany, "DK": Denmark, "E": Spain, "F": France, "I": Italy, "N": Norway, "NL": Netherlands, "P": Store this channel on your TV. You will need to look at the TV instruction book if you do not know how to do this. Portugal, "S": Sweden, "SF": Finland, "OTHERS": Only carry out stages 5 8 if you cannot obtain clear video playback as described in 4. Select a TV channel number on stages 1 which you wish to watch video's. Make sure that your VCR is in standby pressing POWER on the remote control (only the clock will be displayed). ~ ~ 6. Press PROG. 3 or 4 on the front of your VCR for more than 4 seconds. RF36 will appear in the display window. The following picture will be displayed on the TV A B CH DKEFI NNLPSSFOTHERS Pr-12 ACMS 2. Press OK to start the automatic storing of the channels of the TV stations in your area. screen. 01 Pr-12 ACMS RF P SET R 12 CHANNEL 36 S C02 00 ARD E the clock Setting To set the colour system Manually The clock in your VCR controls time and date settings for your VCR. automatically during ACMS (Automatic Channel Memory System) when The clock is set VCR detects Teletext a channel that broadcasts your a 1. Press i. 2. The main 3. Press 1 or Press 3 or 4 4. If the broadcast signal. the clock will not be set and signal is weak will require setting menu will appear on the TV screen. 2 to select the SYSTEM and press OK. to select according to the COLOUR system used. manually. 1. Press i. Press 1 or 2 to select TIME DATE. Press OK. VCR REC Dr. fOSD The auto pressing adjust mode be set to "OFF" can D or E if you want to set the time ON OFF by 16:9 4:3 DECO DER OPR manually. Press OK. 5. 2 to select the RF AUDIO. Press 1 or Press 3 or 4 to select according to the RF AUDIO used. AUTO ADJUST : ON TIME DATE VCR REC E Dr. fOS ON OFF 6. HHMNDDMMYY :. - - -- -- -- Press i to 4:3 remove DER OPR the menus from the TV screen. --- . TIME DATE 2. Use the numbered buttons to alter the the remote control on HOURS, MINUTES, DAY, MONTH and YEAR. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. The day of the week will appear automatically when you enter the year. HHMNDDMMYY 8 :. 00101 . THU TIME DATE 3. If you make a mistake press 1 or 2 and enter the correct details. 4. Press i. 13 How to using the main This VCR easily displayed be the can menus The menu programmed by using on screen. controlled from the Remote menus are Control Handset. Switch 1. your TV set and video recorder the POWER button. on pressing by The main If the TV broadcast this 1. will appear menu on the TV is weak your VCR signal may not detect the necessary information and will not be able to store them correctly. To overcome turn to the MANUAL TUNING problem please section Press i button. 2. Tuning in TV Stations Automatically on page 15. Press POWER to turn your VCR. on screen. 2. Press i button. The main Press 1 will appear on the TV 2 to select the ACMS. menu or screen. Press OK. VCR Pr-12 PSET R ACMS TIME DATE 16:9 4:3 DECODER OPR SYSTEM Dr. fOSD ON OFF 12 REC REC Timer recording setting (see p. 26). PR SET Manual tuning setting (see p. 15). ACMS ACMS (Automatic Channel Memory System) (see p. 14). TIME DATE Date & clock setting (see p. 13). SYSTEM To set the Colour TV System (see p. 13). Dr. To check a problem with your VCR (see p. 36). F.OSD ON/OFF To display the operational - ON OFF Pr-12 PSET R fOSD 16:9 4:3 TIME DATE DECODER VCR SYS- Dr. TEM Pr-12 OPR - - - - A B CH NN L DKEFI PSS F OTHERS - Pr-12 ACMS - mode of your VCR 3. 16:9/4:3 - p. 36). To select the aspect ratio of your TV (see DECODER OPR - p. To 37). pay-TV decoder (or Satellite) with your VCR (see p. 37). To improve the playback picture (see p. 23). - Press 1 or 2 to select COUNTRY. (A:Austria, B:Belgium, CH:Switzerland, D:Germany, DK:Denmark, E:Spain, F:France, I:Italy, N:Norway, NL:Nertherlands, P:Portugal, S:Sweden, SF:Finland, OTHERS) Press OK again to start the automatic tuning (see use a process. The VCR's clock will be set automatically when tuning has finished. If the clock is wrong please see "Setting the clock manually" on page 13. automatic Tip: You can setup 3. change the menu language on the DVD (See the Menu Language on page 18.) menu. Press 1 and 2 to select the desired Press OK and press 3 4. Press i to remove the or 4 C02 00 ARD 02 C03 00 ZDF 03 C04 00 WDR 3 menu. S to select. menus 01 from the TV screen. 4. The TV STATION TABLE will appear when is complete. Press i to settings. save your 02 C03 00 ZDF 03 C04 00 WDR 3 04 C05 00 BR3 05 C06 00 HR3 06 C07 00 N3 07 C08 00 08 C09 00 PSET R 14 E Pr-12 ACMS NDR3 SWF3 MOVE : DELETE : , tuning in TV Stations Tuning In certain areas Manually of the country broadcast 4. Searching will stop when it locates signals Press 3 to or 4 correctly. PR CH 09 C10 You must tune in these weaker broadcast manually MFT in order for your VCR to store STATION CHANNEL/CABLE : AV PSET R them. 1. station. adjust. may be too weak for your VCR's automatic tuning process to find or assign TV stations stations a Press 2 to select MFT. 5. Press i. The main Press 1 will appear on the TV 2 to select the PR SET. menu or Press 2 to select STATION that you may so name your TV station. Press OK. screen. The TV station Press OK. list will appear. name PR CH MFT 09 C10 00 VCR Pr-12 REC ACMS TIME DATE DECODER OPR SYSTEM Dr. PSET R fOSD ON OFF 16:9 4:3 6. Press D E to select a station name from the list. or Press OK to select it. PR CH 01 MFT STATION 00 PR-01 If your station to OK, but go CHANNEL/CABLE : name isn't stage 7. the list do not press on AV PSET R 2. Press i. The station table will appear. Press 3 or 4 to select the programme number that you want to tune (for example, PR 09). C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PSET R : DELETE : MFT 00 You can change a TV station name manually using the "standard" names. rather than Press G. PR-08 MOVE CH C10 PSET R 7. 02 PR 09 or 4 station new Press 1 , to select letters and numbers for Press 3 the or 2 to name. move back and forth between characters. 3. Press OK. Press OK. Press AV to select C (Standard stations) or S (Cable stations): C02 - C69, S01 - S41. PR C09 Enter the channel number of station that you want CH MFT C10 00 STATION to tune with the numbered buttons or use 3 or 4 to find the required PSET R station. 8. PR 09 CH MFT STATION -- ---- CHANNEL/CABLE Press i, confirm the station Press i again. Your new TV station has now placement. been tuned into your VCR. : AV If you wish to stages 1 8. manually tune other stations repeat - PSET R 10 11 12 13 14 15 16 PSET R -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- MOVE : DELETE : , 15 Changing the order of TV Stations After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. 1. Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations Deleting After tuning TV stations into your VCR you may wish to delete a station. The instructions given on this page will show you how easily delete any unwanted TV stations. 1. screen. Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. screen. VCR Pr-12 REC VCR Pr-12 REC fOSD ON OFF 16:9 4:3 PR ACMS TIME DATE DECODER OPR CH 01 SYS- ON OFF Dr. TEM MFT STATION 00 PR-01 CHANNEL/CABLE Press i. Press 3 : 2. 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 CH MFT STATION 00 PR-01 : AV MOVE : DELETE : C02 00 Press i. Press 3 or 4 to select the programme number you want to delete. (for example, PR 03) 02 C03 00 PR-02 03 C05 00 PR-03 04 C06 00 PR-04 05 C04 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 PSET R PR-07 PR-08 MOVE : DELETE : , , C03 00 PR-01 PR-02 04 C05 00 PR-04 05 06 C06 C07 00 00 PR-05 07 C08 00 PR-07 08 C09 00 PR-08 03 Press 1. After a short while, the selected station will be deleted. PR-06 P SET R to select the programme number you want to move to (for example, PR 05). or 4 01 C02 00 02 C03 00 PR-02 03 C05 C06 00 PR-04 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 04 Dr. TEM CHANNEL/CABLE 3. Press 3 OPR SYS- PSET R PSET R 3. DECODER AV to select the programme number you want to move (for example, PR 03). Press 2. 02 16:9 4:3 PR or 4 01 TIME DATE 01 PSET R 2. ACMS fOSD 00 PR-01 C03 00 PR-02 04 05 06 C06 00 PR-04 C04 C07 00 00 PR-05 PR-06 07 C08 00 08 C09 00 DELETE PSET R PR-07 PR-08 : : , Press i to remove the menus from the TV screen. If you wish to delete other TV stations repeat stages 05 C02 02 MOVE 4. PR-01 01 1 - 3. 01 C02 00 PR-01 02 C03 00 PR-02 04 05 C04 00 PR-04 C07 00 PR-05 06 C08 00 PR-06 07 C09 C10 00 00 PR-07 PR-08 PSET R 4. Press OK. The selected programme will be moved to the new programme number. If you wish to move other TV stations repeat stages 1 4. Press i to remove the menus from the TV screen. 08 MOVE: PSET R DELETE : , - 01 C02 00 PR-01 02 C03 00 03 C05 C06 00 04 00 PR-02 PR-03 PR-04 06 C07 00 PR-06 07 C08 00 08 C09 00 P R SET 16 PR-07 PR-08 MOVE : DELETE : , How to selecting Stored TV stations: Stored TV stations can be selected in either of two ways. Press PROG. 3 or 4 to select different stations that are tuned into your VCR. You may also directly select stations using the numbered buttons on the remote control. Before Operation-DVD part On-Screen You use general playback status on the TV can be changed using the menu. on-screen display: display can the Some items screen. To Display the 1. Press DISPLAY 2. Press v / V to select Press b / B to an inputting change the the title For number). some no Number also functions, Playback TITLE A-B 1/9 B, Numbers provide 1/12 b / B, Numbers ENTER 0:20:09 Numbers, ENTER language Digital Audio Output mode b/Bor and AUDIO InstaliodSeup setting. all of the features button is on-screen b / Audio Subtitle language Some discs may not shown below. If 1/3 Time search setting. You can appropriate (e.g. Notes: ? Title Number Chapter highlighted. press ENTER to execute the ? Selection Method ENTER item. the number buttons if use Items during playback. The selected item is 3. Example: On-Screen Display during playing DVD Video pressed for 10 seconds, display disappears. the ABC 1 ENG Angle b/Bor SUBTITLE b/Bor 1/3 ANGLE Sound 3D SUR b/B Status/Restrictions Example: On-Screen Display during playing VCD Repeat title Repeat sequence Enter Marker a Items Selection Method Track Number MARKER SEARCH 123456789 Marker Search Resume Action play menu from this prohibited or 1/3 B, Numbers ENTER Time search 0:20:09 Audio Channel STEREO point not available b / (or PBC mode) Numbers ENTER b/Bor Sound AUDIO 3D SUR b/B Example: On-Screen Display during playing divx movie disc Items Selection Method Track Number 1/3 b / B, Numbers ENTER Time search 0:20:09 Audio language Digital Audio Output mode 1 and Subtitle language Sound MP3 ABC ENG 3D SUR Numbers, ENTER b/Bor AUDIO b/Bor SUBTITLE b/B 17 Initial LANGUAGE Settings LANGUAGE By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 18 to 22. To display the menu. SETUP will take you back to initial To go back to the previous move alternate 18 menu appears. option the selected item, move as well as option then to the third level. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items additional steps. Press SETUP or Menu Language Select a for the language PLAY to exit the Original: Refers to the disc recorded. was Setup menu and on-screen DVD Setup menu. original language Other: To select another according chapter. reference press CLEAR. to the If you track in which the language, press number corresponding 4-digit language code list in the enter the wrong language code, buttons then ENTER to enter the number Use v / V to select the second desired press B to 5. Setup setting for setting(s). Select language you prefer for the audio (disc audio), subtitles, and the disc menu. then press to the second level. The screen shows the current Move Select the Use v / V to select the desired require Original Disc Audio / Subtitle / Menu Operation 2. 4. Off Disc Menu display. level: Press SETUP. The 3. Disc Subtitle A second press of the remote control. on 1. B to Original screen. To go to the next level: Press B on the remote control. General English Language Disc Audio and exit the Menu: display Press SETUP to Press b Menu 4. When the confirm menu appears on your screen DISPLAY Cancel is DISPLAY TV 16 Aspect Display Mode Progressive TV Output : to 9Wide highlighted highlight Enter. as default. Use the b button Widescreen Scan 5. Off Select Pressing scan RGB ENTER will set this unit to Progressive mode. Caution: Once the Move TV DVD Aspect 4:3 : setting for progressive scan output is entered, image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to an Select Select when a On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. standard 4:3 TV is connected. 16:9 Wide: Select when a 16:9 wide TV is connected. Display Display DVD Mode Press STOP and hold it for five seconds before releasing it. The video standard setting visible Mode setting works only when the TV LetterBox: TV Displays a wide picture with portions of the screen. bands on the upper and lower Panscan: Automatically displays the wide picture on and cuts off the portions that do not fit. the progressive InstaliodSeup output will be restored to the picture will once again be analog TV or monitor. Select Set this unit TV Output Select options according to the type. YPbPr: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To turn On Output a conventional TV connection screen Progressive on a and Aspect mode is set to "4:3". entire 2) on this unit. RGB: When your TV is connected with the SCART (RGB signal) jack. scan: Connect component out of this unit to the input of your monitor/television, set your television or monitor to Component Input. 1. Select "Progressive Scan" on the DISPLAY menu then press B. DISPLAY TV Aspect Display Mode Progressive TV Output Scan On Off Select Prev. 2. Select "On" using Move Enter the v / V buttons. 3. Press ENTER to confirm your selection. The confirm menu will appear. Note: If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. 19 AUDIO Each DVD disc has a variety of audio output options. options according to the type of Set this unit AUDIO audio system you use. AUDIO Dolby Digital Bitstream DTS Bitstream MPEG PCM Sample Freq. 48KHz DRC On Vocal On Move Dolby Digital Select DVD / DTS / MPEG DivX Bitstream: Select "Bitstream" if you connect the DVD Player's DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. PCM MPEG): Select when digital stereo amplifier. Dolby Digital or MPEG will be (for Dolby Digital connected to a DVDs encoded in automatically / two-channel downmixed to two-channel PCM audio. Off not (for DTS): If you select "Off", the DTS signal is output through the DIGITAL OUT jack. Sample Freq. (Frequency) DVD If your receiver or amplifier is NOT capable of han96 kHz signals, select 48 kHz. When this choice dling is made, this unit to 48 kHz signals automatically so converts any 96 kHz your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit passes each type of any further processing. signal through Check the documentation for your its capabilities. Dynamic Range Control (DRC) amplifier DVD without to verify DivX With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presen- tation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. Vocal DVD Set to On playing. only when normal stereo sound. 20 a multi-channel karaoke DVD is The karaoke channels on the disc mix into OTHERS DivX(R) The PBC, Auto Play and DivX(R) VOD settings can be changed. VOD DivX can display the DivX DRM (Digital Rights Management) Registration code for your unit only. You OTHERS PBC Auto DivX(R) On Off Play DivX(R) VOD Your Video On Demand registration code is : XXXXXXXX Select To learn more visit www.divx.com/vod (Done) Move Select Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent The PBC Set VCD Playback Control (PBC) On: Video CDs with PBC are played according to the are played the same way as Audio CDs. Auto Play Display Play function is not active. Play function may not work for of can watch the file. VOD Rental DivX(R) This rental has 3 views left. can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. If Auto Play mode is set to On, this DVD player will search for title that has the longest playback time and then play back the title automatically. Play the number which you View You Off: Auto options viewing DVD function is active. InstaliodSeup file. Notes: ? On: Auto move If you rent the DivX VOD file, it has several limits as shown below. PBC. Off: Video CDs with PBC encrypt an to On or Off. Do you want to use one of your 3 views now? (Yes) (No) ? The rental has been expired. Notes: The Auto some DVDs. Rental Expired (Done) ? Display the authorization error. Authorization Error This player is not authorized to play this video. (Done) 21 LOCK Password (Parental Control) You LOCK Unlock Rating Password Country New 2. Follow step "New" is Input Move that may not be suitable of these discs contain scenes Many parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer suitable more scenes as an If you control feature allows you to block rating you input, there to scenes below the 1. 2. 3. your children from being able to view material you believe is unsuitable. "Rating" on the LOCK menu code you Press SETUP to Input the 6-digit display the can Setup clear it using menu. number "210499" and the Enter a new code as security described above. Code DVD country/area whose standards used to rate the DVD video disc, based list in the reference chapter. Rating, Password and Country Code are prompted to do so. Input 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. a rating a from 1 to 8 using 1. 1-8: tions and Rating one (1) rating eight (8) is 3. Select the first character Unlock If you select unlock, parental control is not active and the disc plays in full. Notes: rating for the player, all disc scenes with rating or lower are played. Higher rated are not played unless an alternate scene is a on the disc. The alternative must have the rating or a lower one. If no suitable alternative found, playback stops. You must enter the 4-digit password or change the rating level in order to play is the disc. 4. Press ENTER to confirm your rating press SETUP to exit the menu. selection, then the LOCK menu the then as shown left (Rating). using v / V buttons. Press ENTER and select the second character using v / V buttons. Press ENTER to confirm your country code selection. the least restrictive. on Follow step 2 the v / V buttons. same "Country Code" 2. 4. has the most restric- Select on press B. 5. 22 Security Code Enter the code of the then features, you must input the 4-digit security code you created. If you have not yet entered a security available your were 2. To access the scenes forget Country press B. If you set the same then press ENTER. by preventing Rating 4-digit code, verify. to code is cleared. parental 3. Select new again If you forget your security code you the following steps: alternative. 1. Select or 4. Press SETUP to exit the menu. Some movies contain access (Rating). "Change" Select DVD for children to view. The it 2 as shown left highlighted. 3. Enter the Rating change password. 1. Select Password on the LOCK menu then press B. DE Code (Security Code) enter or can Operation Playing a 5. tape You will only be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC tapes (on PAL TV). the desired function. During Make If distortions that you have correctly connected your described earlier in this book. Turn on your TV. Press POWER to turn your VCR. Insert the video cassette into your VCR. on The video cassette should have the window side facing 2. up and the arrow Press PLAY to start facing away from you. your tape. video cassette which has had its 3. the best automatically adjust picture quality. Press PAUSE/STEP to still Press PAUSE/STEP the tracking to a picture, reduce playback. Press EJECT. If the end of the tape is reached, your VCR will stop playback automatically, rewind, stop, eject the tape. CM Operation (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume normal playback. While tape is playing press CM SKIP on the remote control to skip commercial (or another programme press CM SKIP to skip: 3 Press 90 seconds 4 Press 120 seconds 5 Press 150 seconds 6 Press 180 seconds (Optimum Picture Response) This feature the tape frame by frame. If you press FORWARD, the picture will be slowed down at about 1/19 times the normal in the -. Press STOP to end OPR picture. repeatedly to advance seen 2 Press 60 seconds AUTO TRACKING Your VCR will be + or 1 Press 30 seconds If you load a record protection tab removed, playback of the cassette will start automatically. give 6. material). Repeatedly playing can them with TRK sure as slow motion and shuttle, the noise bars on the picture according to the status may appear of tape. - VCR G. To switch off the slow motion and shuttle, press Getting a better picture When a cassette is inserted and playback started, the automatic tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press TRK + or on the remote control to manually adjust the tracking until any distortions have been removed. Press numbered 0 on the remote control to switch automatic tracking back on again. 1. playback, Shuttle : During playing back or still picture press F or You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion playback can be paused for up to 5 minutes. After 5 minutes your VCR will stop the tape to prevent damaging the tape or your VCR Tapes automatically improves playback picture quality by adjusting your VCR to the condition of the tape. 1. Press i. 2. Press 1 3. Press OK. or 2 to select OPR. . Still picture quality can pressing TRK + or be improved slightly by -. 4. Press PLAY to continue playing your tape. Picture search: back press either FORWARD or BACKWARD and this will enable you to rapidly wind the tape (7 times normal playback) and see where you are on the tape. Logic search: During fast forwarding OFF SOFT SHARP R During playing f ON OFF 4. Press 3 or 4 16:9 4:3 TIME DATE DECODER SYSTEM Dr. OPR i OPR repeatedly to select: OFF, SOFT or SHARP. Please note you may rewinding press and hold FORWARD or BACKWARD the picture will be played back at 7 times normal playback speed. VCR 12 12 MS - playing or 5. a only set OPR when tape. Press i return to screen. 23 Instant Timer 5. Recording (ITR) Your VCR allows you to make of simple methods: recordings using a variety Instant Timer immediately Recording (ITR) start recording a set period of time or until the for video cassette Your VCR runs which will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be quality Long Play or Play. SP will produce improved picture and sound quality, however LP will provide twice as much recording time as SP. Press REC/ITR to start recording. RECORD will appear on the TV screen. Press REC/ITR several times. Each successive incorporates Long Play (LP) and sound 6. out. enables you to record up to twice the amount of time on a video cassette. For example an E-180 picture Press LP if you wish to record in Standard when slight using LP. a press will increase the record time by 30 minutes until you reach a maximum of 9 hours. 7. Press PAUSE/STEP to avoid recording unwanted scenes. Press PAUSE/STEP to continue loss in recording. If you press PAUSE/STEP during ITR, this unit will enter the record pause mode and ITR is cancelled. paused for up to 5 minutes; RECP displayed when a tape is paused. After 5 minutes your VCR will stop recording to prevent damaging the tape or your VCR. Tapes can be will be 1. Make VCR that you have correctly connected your described earlier in this book. sure as Press POWER to turn 2. Insert your VCR. on video cassette with a protection 8. tab into your VCR. The video cassette should have the window side facing 3. up and the arrow facing away from you. Press PR + or to select the programme number you wish to record. - You may also directly select programme number using the numbered buttons on the remote 4. EJECT will appear recording the rear the rear from EURO AV1 SCART socket of your unit. AV 2 for recording from EURO AV2 SCART socket of your unit. AV 3 for recording from VIDEO IN and AUDIO IN on (Left & Right) sockets on the front of your unit. screen for a few If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video cassette. If you wish to record directly from the SCART or RCA sockets repeatedly press AV until the socket on the TV Notes: It is AV 1 for on seconds. record displayed. recording. Press EJECT. control. you wish to record from is 24 Press STOP to end possible to record on a video cassette protection tab removed by covering with self adhesive with the the hole tape. Remember you can record one programme while another by starting your instant recording, watching press TV/VCR to appear TV indicator in the display window and then selecting a different channel on your TV. ShowView ShowView 6. Programming the date, Timer Recording by simply entering a ShowView Code. ShowView Codes are published in most TV guide magazines; they can vary one to nine numbers in length. greatly simplifies entering channel, start and end times of a SHOWVIEW is a registered trademark Development Corporation. PR ARD Make sure 7. a that TV channels have been tuned and video cassette with TIME protection tab into Press SHOWVIEW. or ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- PR ARD -------- 3. 0~9, ONCE: To record -- -~ -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- SP -- SP -- SP -- SP -- SP -- SP (SP, TIME 12 10 :: 111155 ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP recording type. once. WEEKLY: To record at the same DAILY: To record every day Sunday) at the same time. 4. -- :: DATE -- ONCE Press D or E to select the :: LP). SHOWVIEW NO. REC SP 10 :: 11 11 -- IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. IP mode is not selected when VPS/PDC is ON. Check that the timer event details are correct. If you wish to record from AUDIO IN and VIDEO IN on the front or from either of the EURO SCART sockets on the back of VCR, press AV to select for correct display (AV1, AV2 or AV3). your VCR. 2. 12 Press D or E to switch VPS/PDC on or off. Press G to select the recording speed. Press D or E to select the desired tape speed IP, stored in correct SHOWVIEW order. Insert DATE -- of Gemstar The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation. 1. Press F or G to select the settings that you wish to revise. (PR, DATE, TIME, VPS and SP). Press D or E to enter the correct information. time every week. and 8. If you want to make another ShowView recording 2 7. Press i twice. If PLEASE CHECK is displayed, you have entered incorrect information and will need to re-enter the data. Press POWER to switch your VCR power off mode. will appear in the video recorder's display while your VCR waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. Press STOP to end recording. repeat stages (except Saturday Press the numbered buttons to enter the ShowView Code of the TV programme that you wish to record. If you make a mistake press F then enter the revised number. 9. - SHOWVIEW NO. 24687654 Notes: ONCE 0~9, REC 5. Press OK. If PLEASE CHECK is displayed it means that you have entered the wrong ShowView number, entered the ShowView number incorrectly. If "- -" is displayed, you have to enter the programme number of the station, you want to record from. PR DATE TIME 12 10 :: 111155 SP :: SP ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP Video Programme System (VPS) The Video Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be recorded exactly from their beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start, or if the programme is extended beyond its scheduled time. Also, if a programme is interrupted, for example, if a news flash is inserted, the recording will also be interrupted automatically and resumed when the programme continues. The VPS signal is broadcast by the TV station and this controls the timer in the video recorder. VPS should be set ON for all timer recordings from TV stations broadcasting these signals. It should be set OFF for all timer recordings from TV stations that are not broadcasting these signals. *** The similar system PDC, which is used in the time being in the Netherlands, can also be used with your new video recorder. 25 You may also select the the start and end times recording using On Screen Display Timer pressing You may set up to seven timer record events within one month of the current date. Note: Before setting the timer make sure that you have set the VCR clock correctly and you know which stations you have tuned TV stations on your VCR. 1. 7. Insert a video cassette with protection tab into your VCR. The video cassette should have the window side facing up and the arrow facing away from you. 2. Press i. Press 1 or 2 to select REC. Press OK. 3. Press OK to start setting the timer record event. If all timer record events are full press 3 or 4 to select the event that you wish to remove and PR DATE ARD 16 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- (SP, IP, or -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ SP -- SP -- DATE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6. SP -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- -- SP SP SP SP SP -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- SP SP SP SP SP SP DATE TIME 16 19002000 :: ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP DATE SP TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP :: SP SUMOTUWETHFRSA -- -- -~ recording. Notes: If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press 3 or 4 to select the event that you wish to delete or change. Press 1 to delete the event...or Press OK to change; then press 1 or 2 to select; Station, Date, Start and End times and LP. Press 3 or 4 to enter the correct information. SP -- Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. 26 -- -- Press STOP to end SP -- Press the numbered buttons to enter the date of the programme. If you press OK before entering the date you may select one of the following automated recording features. Press 1 or 2 to select, then press OK to confirm. DLY To record every day (except Saturday and Sunday) at the same time. SU~SATo record at the same time every week. -- :: -- 9. SP -- TIME -- -- -- -~ Check that the timer event details are correct. Press i twice. If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. Press POWER to switch your VCR Standby. will appear in the display window while your VCR waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. SP -- - PR -~ 8. SP -- Press the numbered buttons to enter the station that you wish to record. When selecting stations 1 9, press 0 first, then the channel number; for example Stations 3 03. You may also select Channels by pressing 3 or 4. Once selected press 2. If you wish to record from AUDIO IN (L/R) and VIDEO IN on the front or from the EURO SCART sockets on the back of your unit, press AV to select for correct display (AV1, AV2 or AV3). ARD -- LP). ARD - 5. -- :: TIME -- -- PR :: IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. IP mode is not selected when VPS/PDC is ON. Press 1 to delete the event. 4. SP ~ -- -- Press 3 or 4 to switch VPS/PDC on or off. Press 2 to select the recording speed. Press 3 or 4 to select the desired tape speed replace. DATE TIME 190020 :: -- PR PR by 3 or 4. If Timer record events Overlap... Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is programmed to start at 16:00 and end at 17:00. Programme 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.) Playing a DVD or General Features Video CD Note: Playback Setup Turn 1. on the TV and select the video connected to the DVD Turn input source player. 2. the audio system (if applicable) and select the input source connected to the DVD player. 3. Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the on playback side down. Press OPEN/CLOSE to close the tray. Playback starts automatically. If playback does not start, 4. press PLAY. In Unless stated otherwise, all Moving to another TITLE When the disc menu might disc has a stopped screen. You can on page operating 21). ? parental control is set and the disc is not within rating settings you must input the password. (See "Lock Menu" on page 22.) ? To watch a The region code for this player is 2 disc has than one chapter/track than more track, you one chapter can move or a to follows: as Press SKIP . or > briefly during playback chapter/track or to return to the the current chapter/track. to of Press SKIP . twice briefly to step back to the previous chapter/track. If player. (two). on a more beginning to any chapter during DVD playback, DISPLAY and press v / V to select the press chapter/track icon. Then, input the chapter/track To go directly numberoruseb/B. the your its number while select the next ? DVDs may have a region code. Your player does not play discs that have a region code different from a another Notes: ? play any title by inputting is stopped. title may differ. Follow the instructions on the each menu screen. You also may set PBC to ? then the disc has procedures (See "PBC" to can move playback is appropriate number (0-9) or use When Use the number buttons to select the track you Off title, you one to another CHAPTER/TRACK want to view and press RETURN to return to the and than Moving ? settings more appear Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE or DISC MENU to return to the menu Menu use b / B to move to another title. instead: menu screen. described another title. Press DISPLAY while playback some cases, operations the remote control. Some features may also be available on the Setup menu. Search 1. Press m or M during playback. 2. Press m or M repeatedly to select the required speed. DVD during timer DVD, DivX disc; X2, X4, X16 recording standby mode, press POWER and DVD to switch to DVD mode. Video CD; X2, X4 3. or or X100 X8 To exit SEARCH mode, press PLAY. Changing the Audio Channel Press AUDIO repeatedly during playback to hear (Stereo, Left, or Right). a different audio channel 27 Still Picture and Frame-by-Frame Playback Repeat You 1. 2. Press PAUSE/STEP the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. on ? ? ? The DVD player will ? go into PAUSE mode. ? ? 2. Use m or M to select the required speed: t (backward), or T 1/2 (forward). 1/16, t 1/8, t 1/4, or t 1/2 1/16, T 1/8, T 1/4, or T Video CD, the Slow speed changes: T 1/16, T 1/8, T 1/4 or T 1/2 (forward). With a Note: playback in reverse is not with possible Video CDs and DivX Discs. Repeat Chapter/Title/Off chapter. the current Title: repeats the current title. Off : does not play repeatedly. Track All Repeat Track/All/Off repeats the current track repeats all the tracks on a disc. : Off - : does not : play repeatedly. ?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe setup menu to use the repeat function (See "PBC" on page 21). If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels. To exit Slow Motion mode, press PLAY. Slow motion - Notes: ? 3. Chapter: repeats Video CDs (X) during playback. now title/chapter/all/track on a disc. during playback to select a desired DVD Video Discs To exit still motion mode, press PLAY. Press PAUSE/STEP a repeat mode. Slow Motion 1. play can Press REPEAT 3D Surround To produce a 3D surround effect that simulates multi-channel audio from two stereo speakers (instead speakers normally required for multi-chanfrom a home theater system). of the five+ Random nel audio 1. Press RANDOM The unit during playback or in stop mode. automatically begins random playback and RANDOM appears 2. Press RANDOM again the TV on screen. By pressing SKIP Use 3 during random playback, the unit (track) and resumes random playback. menu must set PBC to Off on the to use the random function (See "PBC" on 1. page 2. 1. 2. 3. 28 a playing at any chosen time on the disc: Press DISPLAY box shows the A-B To repeat option. highlighted. Time Search 21). Repeat will be Use1or2totoselect"3DSUR". To start PBC, You option To turn off the 3D Surround effect, select "Normal". > Video CD with during playback. to select the sound or 4 The sound Note: setup 2. 3. selects another title a Press DISPLAY to normal. Tip: On 1. during playback. The elapsed playing time. time search Press v / V to select the time clock icon and "-:--:--" appears. 3. sequence. Press A-B at your chosen appears briefly on the TV starting point. Press A-B end screen again at your chosen briefly on the TV repeat sequence begins. again the required start time in " A * " to cancel. point. and the hours, minutes, and If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. screen. "A B" appears Press A-B Input seconds from left to 4. right. Press ENTER to confirm. selected time. Playback starts from the Zoom Use to zoom Press ZOOM 1. the video enlarge image. during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture. DVD Features Checking the contents of DVD discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press DISC MENU. Input the B v V buttons to Each press of the ZOOM button changes the TV in the sequence: 100% size → 400% size 2. Special corresponding number or use the b highlight your selection. Then press ENTER. screen → 1600% size → screen fit mode → 100% size Title Menu Screen fit mode: You the can screen 1. the way the change when image appears on you're playing a DVD movie. Press 3/4 to select between Normal, Enhanced, and Maximum. Use the bBvVbuttons to 3. zoomed To 4. move through picture. normal resume playback, ? press CLEAR button. To enter points. point the TV screen a on the disc. The Marker icon appears to enter up to nine on markers. or 1. During disc Clear search menu a Marked Scene Within 10 seconds, press b / B to select number that you want to recall or clear. 3. Press ENTER and marked scene. playback a and again menu is displayed. to exit. recorded at different scenes angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select a desired angle. Note that the number of the current angle appears on the display. Changing press SEARCH. The marker appears on the screen. playback, 2. angles, as camera options, camera briefly. Repeat To Recall subtitle Angle If the disc contains from up to nine memorized marker, press MARKER at the playback desired the Press TITLE to exit. Camera Marker start can 3. Press DISC MENU Marker Search You offers features such menu Press DISC MENU and the disc disc, VR disc and movie file. a may appear. a menu, Otherwise, the disc screen. Disc Menu Zoom may not work on some DVDs. Screen fit mode is available for playing the DVD To enter menu The on the appears spoken language and chapters for the title. the Notes: ? 2. Press TITLE. If the current title has menu marker starts from the Or, press CLEAR and the marker the Audio Press AUDIO different audio Language repeatedly during playback language or audio track. to hear a With DVD-RW discs recorded in VR mode that have both a main and Bilingual audio channel, you can (L), Bilingual (R), or a mix of Bilingual) by pressing AUDIO. a switch between Main both (Main + number is erased from the list. 4. You on any marker by the marker search menu. can play inputting its number Subtitles Press SUBTITLE repeatedly during playback languages. to see the different subtitle Note: ? The subtitle file of the DivX file is displayed only smi, srt and sub. ? If there is no information not read in the DivX file, or " 1 there is " or a code that etc. are can displayed. 29 Playing Audio CD an or MP3/WMA MP3 / WMA disc limited Disc ? player can play MP3/WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs. ? player is Sampling frequency: within 8 48 kHz (MP3), 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 192kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which - within 32 The DVD with this compatibility follows: as - - - ? Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and playback starts. ? ? AUDIO CD 1/12 0:52:07 List Program creates an ISO 9660 file Track1 Track2 Track3 ? Track4 File names and must Track5 Track6 Track7 ? Clear All Track8 PROGRAM They should have maximum of 8 letters .mp3 or .wma extension. contain special letters such as / incorporate should not system. a an ?*:"<>letc. Edit ? The total number of files on the disc should be less than 650. MP3 / WMA 1. Press v / V to select folder, and press ENTER a to see the folder contents. 2. Press v / V to select a track then press PLAY ENTER. Playback starts. or player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MUSIC 1/12 0:00:00 This DVD these List require certain pre-existing conditions (see above) to ensure compatible playback. Program 1-Music1 2-Music2 Customers should note that 3-Music3 4-Music4 required 5-Music5 6-Music6 DISPLAY Info PROGRAM Edit should Tip: ? If you owner. are in a file list return to the Folder on list, the MUSIC menu the v / V to use and want to and highlight press ENTER. ? ? ? Press DISC MENU to to the next page. On a CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word on When a playing titles, you 30 move top of the file can see menu containing is highlighted. information such the information is and music from the Internet. Our company has no right to grant such permission. Permission Clear All 7-Music7 permission in order to download MP3 / WMA files as track by pressing DISPLAY. always be sought from the copyright Audio CD and MP3 / WMA Disc Random Features 1. Pause 1. Press PAUSE/STEP 2. To return to press Moving ENTER or (. 2. until RANDOM menu screen. Tip: >) briefly during playback track or to return to the beginning or By pressing SKIP > Press SKIP . twice previous In 3. case Repeat You 1. can to go back to the track. Repeat 1. of audio CD, to go enter the track number buttons briefly directly to any track, using the numbered (0-9). a 2. track/all on a Press REPEAT when disc. playing ? ? on the menu screen. Press A-B again at your chosen end point. Repeat icon and "A-B" appear on the menu screen, and the sequence begins to play repeatedly. 3. a disc. The repeat To exit the sequence and return to normal play, press A-B again. The Repeat icon disappears from the Press REPEAT to select ? To repeat a sequence during disc playback press A-B at your chosen starting point. The Repeat icon The icon appears. 2. A-B and "A" appear Track/All/Off play during random playback, the unit resumes random playback. selects another track and to go to the next of the current track. 2. playback, press RANDOM disappears from the To return to normal repeatedly to another Track Press SKIP 1. screen. during playback. playback, press PLAY, PAUSE/STEP again. Press RANDOM during playback or when playback is stopped. Random Playback begins immediately and RANDOM appears on the menu a desired repeat mode. 3D Surround Track: repeats the current track All: repeats all the tracks on a disc. Off(No display): does not menu screen. To play repeatedly. produce a 3D surround effect that simulates multi-channel audio from two stereo speakers (instead speakers normally required for multi-channel audio from a home theater system). of the five+ Note: If you press SKIP (>) once the repeat playback cancels. during Repeat Track playback, 2. Search 1. 2. Press AUDIO Press m or M during playback. Press m or M repeatedly to select the X8 backward or during playback. "3D SUR." appears on To return to normal playback, press AUDIO disappears from repeatedly speed: X2, X4, 3. 1. the until "3D SUR." menu screen. the menu screen. required forward. To exit SEARCH mode, press PLAY. 31 Repeat Programmed Programmed Playback 1. 1. Insert a 2. contain 30 tracks. can Press REPEAT when Press REPEAT to select ? disc. ? ? Audio CD AUDIO CD 2. MUSIC or menu disc. The repeat a desired repeat mode. Track: repeats the current track repeats all the tracks on programmed list. All: Off(No display): does not play repeatedly. Note: appears. If you press SKIP (>) once the repeat playback cancels. mark will appear to the right of the word on the right side of the menu screen. E a MP3/WMA Discs: or Press PROGRAM. The playing icon appears. The program function enables you to store your favorite tracks from any disc in the player memory. A program Tracks during Repeat Track playback, "Program" Erasing Note: Press PROGRAM disappear again, then Program to exit the the 2. List List E Program E Program Track1 Track5 Track2 Track7 1-Music1 4-Music4 Track3 Track4 2-Music2 6-Music6 Track4 Track1 3-Music3 1-Music1 3. 2-Music2 Track5 4. Clear All 7-Music7 DISPLAY Audio CD Menu The program PROGRAM to exit the stopped. playback is list. erase 2. menu. Video CD with PBC, you must set PBC to Off on programmed playback List E Program Track5 Track2 Track2 Track3 Track3 Track4 Track1 Track5 Clear All Video CD Menu Select a track on the "List", then press ENTER to place the selected track on the "Program" list. Repeat to place additional tracks on the list. Press B. Select the track you want to start "Program" list. Press PLAY or ENTER to start. playing on the Playback begins the order in which you programmed the tracks. Playback stops after all of the tracks on the "Program" list have To normal resume played once. playback from select a track of CD and then press PLAY. playback, to erase additional tracks Complete Program "Erasing a List Track from Program Use 3/4 to select "Clear All", then press ENTER. programmed (or MP3/WMA) list complete Program for the disc in will be erased. Note: The programs removed. VIDEO CD Track1 the Follow steps 1-2 of List" as above. The the setup menu to use the (See "PBC" on page 21). Repeat the list. appears. Press menu Note: 32 Press CLEAR. Erasing MP3/WMA Menu 1. 6. "Program" PROGRAM Edit Info Video CD: Press PROGRAM while 5. to the Use v/V to select the track that you wish to "Program" list. on PROGRAM Edit 4. move from the 6-Music6 Clear All Track8 3. Press B to 5-Music5 Track7 a Press PROGRAM in the stop mode to Edit mode. Program 4-Music4 Track6 On : List Program 1/12 0:00:00 1/12 Track from Video CD enter MUSIC AUDIO CD 0:52:07 1. mark will E Edit mode. a are also cleared when the disc is Viewing JPEG Disc a Moving Using this DVD Player you can view Kodak PICTURE CDs and discs with JPEG files. 1. Insert a appears disc and close the tray. The PHOTO on the TV screen. menu PHOTO Preview List JPEG Folder 1 JPEG to another File Press SKIP (. or >) or cursor (b or B) once viewing a picture to advance to the next or previous file. while Zoom JPEG Use zoom (see 29 to enlarge page) the photo image. JPEG Folder 2 >>> JPEG Folder 3 To rotate JPEG Folder 4 JPEG Folder 5 picture JPEG Folder 6 Press v / V JPEG Folder 7 during showing JPEG Folder 8 picture clockwise or a To listen to MP3/WMA music 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, use the v / V buttons on the remote to and press ENTER. highlight 3. Viewing the file proceeding starts. While viewing a file, you can press STOP to the previous menu (PHOTO menu). Press DISC MENU to Slide Show move PLAY. > containing to MP3/WMA disc. the (Slide Show) Speed options (Slow). display PHOTO 3. Press v / V to select 4. Use B / V to select a starts. The STOP is photo menu. file. icon then press ENTER. will continue until playback pressed. then To listen to only the desired music watching picture, programmed the desired tracks from the "MUSIC" menu and then proceed as above. : >>> (Fast), >> limited as compatibility with this player is follows: Depending upon the size and number of JPEG a long time for the DVD player files, it could take PHOTO word to read the disc's contents. If you don't see an on top of the menu is highlighted. Press RETURN, information of file is hidden. player will now slide show. ? go into PAUSE mode. To return to the slide show, press PLAY PAUSE/STEP again. after several minutes, some of --- 2048 during display the files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x JPEG Press PAUSE/STEP The Operation the two types of file in On a disc with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or Still Picture 2. same player. on-screen 1. listening the Press TITLE to ? ? on Tip: highlight three Slide (Normal) and ? Insert the disc JPEG disc are files while 2. to the next page. Tip: There display Playback press ENTER. ? can music files recorded to move JPEG Use vVbBto You the or watching picture JPEG 1. If you want to view a particular file, press v / V to highlight a file and press ENTER to rotate the picture counter clockwise. or pixels and burn another disc. The total number of files and folders on the disc should be less than 650. press ? Some discs may be incompatible due to a recording format or the condition of disc. different ? Ensure that all the selected files have the extensions when ? If the files have rename ? File them names are Windows into the CD ".jpg" layout. ".jpe" or ".jpeg" extensions, please ".jpg" file. as without able to be read the files copying by shown ".jpg" extension will not be this DVD as JPEG player. image Even though files in Explorer. 33 DVD VR format Disc Playing a This unit will play DVD-R/RW discs recorded Maintenance and Service using using the DVD-Video format that have been finalized a ? This unit will play DVD-RW discs recorded using Recording (VR) format. a appears When shipping save ? ? Press TITLE to move or to the list menu. Do not use near carton and packing volatile liquids such as insecticide the unit. or plastic products in contact long period of time. since they Do not leave rubber with the unit for a leave marks the surface. Cleaning on the unit player, use a soft, dry cloth. If the extremely dirty, use a soft cloth lightly with a mild detergent solution. To clean the Note: Unfinalized DVD-R/RW discs cannot be played in this surfaces are moistened player. ? original shipping the exterior surfaces clean spray Press v / V to select a track then press PLAY ENTER and playback starts. the the unit factory. Keeping ? before materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the 3. chapter service technician. the Unit Handling Please disc and close the tray. The DVD-VR on the TV screen. Insert menu DVD-VR 2. a DVD-recorder. the Video 1. Refer to the information in this contacting Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player does not support these kinds of discs. Do not or use thinner, strong solvents such as these as might damage alcohol, benzine, the surface of the unit. What is 'CPRM'? CPRM is a copy protection system (with scramble system) only allowing the recording of 'copy once' broadcast programs. CPRM stands for Content Protection for Recordable Media. player is CPRM compatible, which means that you record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings This can can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings players that are only be played on specifically compatible with CPRM. can Maintaining the Unit The DVD player is a high-tech, precision device. optical pick-up lens and disc drive parts are dirty worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of For details, please service center. 34 If the or use. contact your nearest authorized Playing Using a this DVD DivX Movie Disc DivX disc Player you can play DivX disc. ? disc and close the tray. The MOVIE appears on the TV screen. Insert 1. a compatibility ? player is limited Available resolution size of the DivX file is under 720x576 menu with this follows: as The file (W x name H) pixel. of the DivX subtitle is available by 56 characters. MOVIE 0:00:00 ? List If there is Movie Folder 1 impossible code to express in the DivX as mark on the " file, it may be displayed Movie Folder 2 Movie Folder 3 " _ display. Movie Folder 4 Movie Folder 5 Movie Folder 6 Movie Folder 7 ? Movie Folder 8 If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the 2. v / V buttons on the remote to and highlight press ENTER. If you want to view a particular file, press v / V to highlight a file and press ENTER 3. If the video and audio structure of recorded file is not or PLAY. interleaved, either video or audio is outputted. ? If the file is recorded with GMC, the unit supports only 1-point of the record level. * Operation GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 encoders, like DivX or Xvid, have this option. There are different levels of GMC encoding, usually Press STOP to exit. 4. ? called 1-point, 2-point, or 3-point GMC. Tip: ? ? Press DISC MENU to On move to the next page. CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and is a MUSIC, PHOTO and MOVIE word highlighted. on top of the menu Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 8 48 kHz (MP3), ? - within 32 ? 48kHz (WMA) 320kbps (MP3), 192kbps (WMA) - Bit rate: within 8 32 - - 35 Additional Features-VCR part On Screen You may Video Doctor Display easily display the current time or tape counter, amount of tape left, day, month, year, day of programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen week, Displays will not be recorded onto the (Self-Diagnosis) This feature informs you that there is a problem with error messages will appear on the your VCR. These TV screen. 1. Press i. Press 1 tape. or 2 to select Dr. Press OK. Press CLK/CNT to 1. Press CLK/CNT display. repeatedly to cycle through the display options. The tape counter and amount of tape left will appear if there is a tape loaded. 2. REC majority of the On Screen leaving only the clock or tape After 3 seconds the Displays will clear counter and the amount of Press CLK/CNT the TV again tape left to remove all on the Pr-12 PSET R ACMS TIME DATE 16:9 4:3 DECODER OPR SYSTEM fOSD ON OFF screen. displays from VIDEO DOCTOR HEAD STATUS screen. TAPE STATUS NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME Tape Counter Memory Stop Digital Tape Counter display window instead of The OK displayed on the by pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on can be the time 2. Press 3 or 4 to check HEAD STATUS O a problem. PLEASE CLEAN: Clean your video heads. the tape. TAPE STATUS 1. Press CLK/CNT. O Press CLEAR to set the counter to 0:00:00. Press PLAY or The tape counter in hours, minutes and seconds. 2. Insert start recording. will display the Press STOP when playback or actual play recording O is (Child Lock) The control buttons on the front of the unit can be switched off so that your unit can only be operated using the remote control. Press LOCK. will appear in the display window. None of the buttons on the front of your unit will work. on the front of your unit will flicker in the display are window for a pressed few seconds. 2. Press LOCK will 36 2Shows the number of timer recording. PR-01 26 10:00~11:00SP Shows the current status of timer The tape will rewind and automatically stop when the counter returns to 0:00:00. If any buttons tape with its protection tab in place NEXT TIMER PROGRAMME O Press BACKWARD. 1. a NO. OF TIMER PROGRAMME time complete. Lock NOT RECORDABLE: again to switch off the child disappear in the display window. lock. 3. Press i. recording. Hi-Fi Stereo Sound Your VCR will record and 2. System playback Press D or E repeatedly Hi-Fi stereo Automatically plays track and two VHS Hi-Fi stereo audio tracks. These 4:3 stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, Only for playing back recordings (4:3). 1. system, video disc or AUTO, 4:3 or AUTO: sound. This allows you to record and playback the sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio stereo audio to select: 16:9. programmes as programmes as back Wide-Screen Wide-Screen and Normal normal. and recording Normal format 16:9: another Hi-Fi VCR. Only playing back and recording Wide-Screen recordings (16:9). for format Your VCR's allows you to enjoy broadcasts with standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be briefly displayed on the TV screen for a of seconds: STEREO couple Both audio channels will be recorded on ON OFF the Hi-Fi 3. the Hi-Fi tracks and the track of the video tape without any separation. 2. Press AUDIO repeatedly until the desired audio mode appears. 3. The choice is STEREO, LEFT, RIGHT and MONO. In BIL playback the primary language is output onthe left channel and the secondary channel is output simultaneously from the right channel when audio output is set to STEREO. The primary language willbe output from both channels when the audio setting is MONO. Please note that when adjusting the tracking trol Hi-Fi stereo sound may revert to MONO. Wide Screen remove Dr. 16:9 4:3 4:3 16:9 DECODER the i menus from the TV screen. Operation To set the decoder We have already described, how to connect a decoder for pay-TV station as CANAL+ or PREMIERE on page 10. For the recording of an encoded station you do not have to control anything. You just select the station and wait shortly until the decoding will start. 1. Press i. The main menu will appear on the TV screen. Press F or G to select the DECODER. Press OK. 2. Press D or E to select. ON: When the decoder is connected to the AV2 con- Your VCR can record and play back wide screen aspect ratio programmes (16:9). To record a wide screen format programme successfully the correct type of wide screen signal must be broadcast by the TV station. 1. 16:9 4:3 AUTO - cable. socket. OFF: When another VCR is connected to the AV2 socket. 16:9 Compatibility + enjoy Wide-Screen playback you must connect your VCR to the TV using a SCART tape. on Press i to Pr-12 ACMS To stereo tracks. The primary language channel (left) will be recorded on the mono track of the video MONO The sound is recorded PSET R fOSD BIL mono VCR 12 REC Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape. 3. Press i to return to a TV picture. Switch on your VCR. Press i. Press F or G to select 16:9/4:3. Press OK. 12 REC PSET R fOSD ON OFF Pr-12 ACMS + 16:9 4:3 DECODER VCR 12 VCR Pr-12 TIME DATE - OPR SYSTEM Dr. REC 16:9 4:3 fOSD OKi ON OFF PSET R ACMS + 16:9 4:3 - DECODER AUTO 4:3 16:9 Dr. 16:9 4:3 i 37 Controlling Additional Features Last Scene This player memorizes last scene from the last disc can You can other TVs with the remote control control the sound level, input source, and power switch of your LG TV with the supplied remote control. Memory You control the sound level, input source, and that is viewed. The last power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate even manufacturer code. scene remains in memory if you remove the disc from the player or switch off the player. If you load a disc that has the scene memorized, the scene is automatically recalled. 1. Note: holding down TV POWER button, press the number buttons to select the manufacturer code While for your TV (see the table below). player does not memorize the scene of a disc if you switch off the player before commencing to play the disc. 2. Screen Saver Code numbers of controllable TVs This The appears when you leave the DVD mode for about five minutes. screen saver in player Stop Video Mode Setting With certain discs, the flickering That or means playback picture may be on straight lines. interpolation or De-interlace is If Release TV POWER button. more them than one code number is listed, try entering at a time until you find the one that works with your TV. one Manufacturer Code Number LG / GoldStar 1 Zenith 1,3,4 (Default), Samsung 6,7 Dot Crawl is shown Sony 8,9 Vertical Hitachi 4 2 not perfectly matched with the disc. In this case, the picture quality may be improved by changing the Note: ? video mode. To change the video mode, press and hold during disc playback. DISPLAY about 3 seconds The Video mode sequence: MODE1 → MODE2 → MODE3 → MODE1 If you turn off the power, the video mode will return to initial default state Detailed MODE1 al or : MODE2 : (MODE1). Description The video of each Video Mode material of the DVD video (film materimaterial) is determined from disc information. source Suitable for playing film based content or video by the progressive scan method. based material recorded MODE3 : Suitable for playing video based comparatively little motion. content with Note: The video mode setting only works when Progressive Scan mode is set to "On" on menu. 38 ? video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. new your TV, some or all buttons may not the TV, even after entering the correct manufacturer code. Depending function the the setup on on If you enter a new previously entered ? code number, the code number will be erased. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. from DVD To VCR Copying Recording from This unit allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. Notes: Be sure setup to set "Progressive Scan" to "Off" on the recorder With this video recorder you can make recordings from an external source, such as copying from another video recorder protected, are attempting In the following description, this video recorder will be recording and will be referred to as VCR The other appliance will be used for playback and B. Insert the disc you wish to copy in the DVD deck and close the disc tray. will be referred to Insert VHS Tape blank VHS Insert a Copy the DVD to VHS videotape into the VCR deck. Tape Press the COPY button on the unit front press the REC/ITR button. panel or The DVD will go into Play mode and the VCR will go into Record mode. If the DVD disc menu appears, you may need to press the Play button manually to begin 2. 3. VCR A should be connected to the SCART socket on the rear panel of your unit or the AV sockets on the front panel of your unit. Insert the recorded tape into VCR A and a blank Press AV until the socket you wish to record from is displayed. (VCR B) recording from EURO AV1 SCART socket the rear of your unit. AV 2 for recording from EURO AV2 SCART socket on the rear of your unit. AV 3 for recording from VIDEO IN and AUDIO IN (Left & Right) sockets on the front of your unit. on If you press the REC/ITR button, be DVD mode. the Copy Process When the DVD is finished end the copy. sure this unit in Stop playing, over and over 4. To start recording, press the REC/ITR and PLAY on VCR A. 5. When you want to finish on both video recorders. press STOP to You must stop the Copy process manually when the DVD movie ends, or the unit may and record VCR A. AV 1 for Note: replay as tape into VCR B. copying. 4. used for Insert Disc 1. 3. camcorder. Note: to copy is copy you may not be able to copy the disc. one 2. or a menu. If the DVD you 1. another video copying, on VCR B press the STOP again. 39 Reference Language Codes Use this list to input your desired language for the Disc Audio, Disc Subtitle, Disc Menu. initial settings: Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Country Choose a 8373 8471 8479 Codes country code from this list. Country Afghanistan Argentina 40 following Code Code Country Malaysia Code ET MY Saudi Arabia SA FJ Maldives MV SN Country Code AR Country Ethiopia Fiji Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU AF SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK Costa Rica CR Italy IT Panama PA Turkey Uganda UG Croatia HR Jamaica JM Ukraine UA CZ JP PH United States US DK Japan Kenya Paraguay Philippines PY Czech Republic Denmark KE Poland PL Uruguay UY Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG LY Romania RO Vietnam VN El Salvador SV Libya Luxembourg LU Russian Federation RU Zimbabwe ZW TR Troubleshooting Check the following guide for the possible cause or VCR do not a problem before contacting service. Cause Symptom DVD work of DVD or Correction VCR button is not switched Refer to page 2. properly. properly. No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. No disc is inserted. Insert No The TV is not set to receive DVD Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV picture. signal output. a disc. screen. No sound. The video cable is not connected Connect the video cable into the securely. securely. The Progressive Scan is set to "On" on the setup menu but is connected to a standard (analog) television. Set The equipment connected with the audio cable is not set to receive DVD Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. signal output. The audio cables are not connected is poor. The DVD not start does player playback. Connect the audio cable into the jacks The power of the equipment connected with the audio cable is turned off. Turn on the equipment connected with the audio cable. Digital Audio Output position. is set to the An unplayable The disc is not properly. disc is inserted. placed upside placed Set the Digital Audio Output to the position, then turn on the DVD player again by pressing POWER. correct The disc is dirty. The TV channels are not tuned in The disc is down. within the guide. The remote control does not work properly. to "Off" securely. The picture Progressive Scan page 19). securely. wrong The (see jacks Clean the disc. Check tuning, carry out tuning again. Insert a playable disc. (Check the disc type and Regional code.) Place the disc with the down. playback Place the disc on the disc tray rectly inside the guide. The disc is dirty. Clean the disc. The level is set. Cancel the Rating function the rating level. Rating There is an obstacle in the path of the remote control and this unit. Remove the obstacle. The batteries in the remote control are exhausted. Replace Video tape cannot be inserted. Is the cassette compartment Eject No Hi-Fi sound Audio mode is not set empty? properly. Video Head Cleaning Whenever a video cassette is inserted into or ejected from This should mean that additional head cleaning should not However dirt accumulating on the head after a long period blurred or broken up. High quality video cassette tapes will old or damaged tapes might. the batteries with or side cor- change new ones. the tape in. Select "STEREO" by repeatedly pressing "AUDIO" on the remote control. your VCR the video head is automatically cleaned. be necessary. of time can cause the playback picture to become not normally deposit dirt onto the video head, but 41 Specification General Power requirements AC 200-240V, 50 Hz Power consumption 19W Dimensions Mass 430 X 78.5 X 270 (approx.) 4.2 (approx.) mm (w/h/d) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% Timer 24 hours RF Modulator UHF 22 (41˚F to 95˚F) display tape 68 - (Adjustable) System Semiconductor laser, Laser Video Head systemDouble wavelength azimuth 6 heads, helical 650 scanning. Signal system PAL Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response nm CD:8Hzto20kHz ratio Signal-to-noise (ANALOG OUT More than 100dB Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB connectors only) (DVD) (CD) Inputs (VCR) Audio Video -6.0dBm, -6.0dBm, more than 10 kohms more than 47 kohms 1.0 75 ohms, unbalanced (SCART/RCA) Vp-p 75 ohms, sync negative (Y) 1.0 Vp-p 75 ohms, negative (C) 0.3 Vp-p 75 ohms sync., Mini Din Vp-p, (SCART) (RCA) Outputs (DVD) VIDEO OUT 1 S-VIDEO OUT COMPONENT VIDEO OUT (Progressive Scan) (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 RGB output 0.7 x x 1 1 75 ohms Vp-p, Audio output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (optical audio) 3 V (analog audio) 2.0 Vrms Audio output 4-pin (p-p), 75 Ω, Optical connector x 1 (1 KHz, 0 dB), 600 Ω, RCA jack (L, R)x2/SCART (TO TV) Outputs (VCR) Audio -6.0dBm, less than 1 kohms (SCART) Video 1.0Vp-p, RGB output 0.7 Design and specifications are Manufactured under license from subject to Vp-p, change 75 ohms, unbalanced without notice. Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol Laboratories. "DTS" and "DTS Digital Out" 42 are (SCART) 75 ohms trademarks of Digital Theater Systems, Inc. are trademarks of Dolby P/NO : 3834RV0025C
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021