LG | WD-12126RD | User guide | LG WD-12126RD User guide

LG WD-12126RD User guide
Washing
Machine
OWNER S MANUAL
WD-12124(6)RD
WD-14124(6)RD
Thank you for
LG
Fully
buying a
Washing
Automatic
machine.
Please read your owneris manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Jumbo drum
40%
LG
s
jumbo
drum
conventional
can
washing
wash about 40%
machines. A
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum water level and
washing time to minimize energy and water consumption.
Direct Drive
System
The advanced Brushless DC motor rotates the Drum
without belt and
directly
pulley.
Child-Lock
The Child-Lock system has been used to prevent children from
pressing any button to change the program during operation.
Low noise
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings..................................................................................3
Specification
............................................................................4
Installation................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................23
Troubleshooting guide
Terms of
2
.............................................................26
Warranty ...................................................................29
W arnings
READ ALL INSTRUCTIONS BEFORE USE
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
Do not install
be
or
or injury
precautions, including the following:
store the washer where it will
Do not wash
exposed to the weather.
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
instructions
published user-repair instructions
or
to persons when
or
using
dry articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as
oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
wax,
that you understand and have the skills to carry
garment manufacturer s wash and
out.
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals,
Do not slam the washer door closed
as
etc.
Close supervision is necessary if this appliance
is used by or near children.
Do not allow children to
this
play on, with,
any other appliance.
Do not leave the washer door open.
An open door could entice children to
or
inside
or
hang
on
crawl inside the washer.
Never reach into washer while it is
until the drum has
moving. Wait
completely stopped.
The
laundry process
retardant of fabrics.
can
or
try
to
force the door open when locked. This could
result in damage to the washer.
To minimize the
possibility of electric shock,
unplug this appliance from the power supply or
disconnect the washer at the household
distribution
or
the door
care
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
If you don t have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
S pecification
Power
plug
If the
supply cord is damaged,
it must be replaced by the
manufacturer or its service agents
or a similarly qualified person in
Drawer
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drain hose
Door
Lower
cover
Drum
Adjustable
Drain pump filter
Lower
Drain
cover
cap
plug
Name
:
Front
loading washing
:
220
240V~,50Hz
Size
:
Weight
Wash capacity
Dry capacity
:
600mm(W)
71kg
Max. Watt
:
Spin speed
:
Power
supply
:
:
Water
:
machine
600mm(D)
850mm(H)
Rating Label
Rating Label
2150W(Dry) / 2100W(Wash)
Refer to the
No
spin/400/800/1000/1400[WD-14124(6)RD]
spin/400/800/1000/1200[WD-12124(6)RD]
:146
consumption
Permissible water pressure
The appearance and
-
Refer to the
No
(20.9
0.3-10kgf/
specifications
/kg)
(30-1000kPa)
may be varied without notice to raise the units
Accessories
Inlet
4
feet
hose(1EA)
Spanner
quality.
nstallation
I
Install or store where it will not be
weather.
exposed
to
temperatures below freezing
or
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin, pay particular
are areas
attention to
to the
exposed
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition at
all times.
Any damage which may
appliance guarantee.
be
by
cause
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
appliance is fitted
Removing
with transit bolts to
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 3 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 3 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 3 bolts and the spanner for future
use.
bungs.
If they are not removed, it may cause heavy
vibration, noise and malfunction.
Whenever the
appliance is transported, the
transit bolts must be refitted.
cap
2. Unscrew the 3 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
I
nstallation
Installation place requirement
Level floor
Drain Hose
:
Allowable slope under entire washer is 1
Power outlet :
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
Washer
than one appliance.
Additional Clearance
Laundry
Tub
:
For wall, door and floor
approx.
2cm
(10cm
: rear
Do not
place
/2cm:right
or
store
modeling is required.
side)
& left
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
E
Brown(Live)
Blue(Neutral)
must be earthed
L
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not
identifying the terminals in your plug, proceed as follows:
correspond
with the coloured
markings
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
6
I
nstallation
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the manufacturer or its service agents
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
?
?
?
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Washing Machine
is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
Connecting
water
supply hose
▶Water supply pressure
30kPa and 1000kPa
▶Don't strip
Inlet hose
must
be between
(0.3~10kgf/cm2)
crossthread when
the valve.
or
to
connecting
▶If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied
with the
water inlet hoses these are in order to
prevent
Hose connector
?
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the tap
completely
?
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Make sure that there is no kink
hose and that it is not crushed.
on
the
7
nstallation
INormal
Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing screw
packing
Middle
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
touch type inlet hose
one
2. Push the upper connector up till
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Rubber
connector
3. Push the
3. Connect the
water
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
In
case
large
the diameter of the tap is
the guide plate.
remove
Guide
plate
Connector
Water
Middle
hose
connector
Turn the middle connector not
to have water leaked.
Connector
Make
sure
that the rubber seal
is inside the hose connector.
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
Your machine
comes
with
only
cold water connection.
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation ! Keep all packaging well away from children
Turn off the
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
ca.
105
cm
?
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
?
?
105
cm
min.60cm max.10cm
100cm
max.
100cm
min. 60cm
strap
min. 60cm
The drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
appliance on a solid and level
preferably in a corner of
floor surface,
the room.
2. If the floor is uneven,
adjust the
adjustable feet as required. (do not
insert pieces of wood etc. under the feet)
Make
sure
that all four feet
are
stable
resting on the floor and then check
that the appliance is perfectly level. (use
a spirit level)
and
After adjusting the feet, fasten
rotating counterclockwise.
lock nut
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
all.
(Please,
move
check both
by
the
up and down at
of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
10
C
are
before
washing
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
causing discoloration of white
lightly soiled one.
can occur
soiled items with
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
3.
Caring
before
etc. If
possible, do
not wash
heavily
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
Check all pockets to make sure
they are empty. Items such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
Close zippers, hooks and strings to
make sure that these items don t
snag
on
other clothes.
Pre treat dirt and stains
a
little
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
max
If too
much
is used
detergent
more
than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy
malfunction)
or cause
loading
Pre Wash
2.
only
+
to
the
motor.
(Causing
a
detergent only for the front
Use powder
Main wash
load
washer.
Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
Main Wash
results, avoid oversudsing.
Adding Fabric Softener
Tips
(
)
125ml
125 ml
Full load
Part load
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
detergent drawer for more than
(Fabric softener could harden)
2
days.
Softener will automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
Solvents(benzene, etc)
are
not
allowable.
12
to
recommendation.
3/4 of the normal amount.
Minimum load
:
1/2 of full load.
Detergent is flushed from the dispenser at
beginning of the cycle.
the
Do not leave the fabric softener in the
Do not pour fabric softener
the cloths
directly on
:
s
early dispensing
of the fabric softener which could stain
NOTE
according
:
manufacturer
unction
FRecommended
Energy
label data based
Fabric
Program
Cotton
courses
to the
according
on
laundry type
program cotton 60
Type
Proper
Temp.
(Option)
Color fast garments
,
tested in accordance with EN60456.
Load
60
Laundry type
is the
same
60
in Cotton.
(40
)
Hand
Wash
laundry easily
30
damaged.(silk, curtains...) (Cold, 40 )
Main
Machine washable woolens
with pure new wool only.
Main
Laundry type
Quick 30 in Cotton and
Pre Wash
is the
30
(Cold, 40 )
Cold
(30
same
Synthetic.
,40
(Option)
Minutes
in
(Auto,
5kg
73
Rating
75
Small, big)
(Auto,
Time Add,
5kg
68
Small, big)
3.5kg
70
Time Add,
161
(163)
181
(183)
(Auto,
(Cold,
Main+(Pre)
30,60)
Hand Wash marked
delicate and wool laundry.
Time
Time Add,
Main+(Pre)
Delicate
Wool
75
40
Synthetic Polyamide, Acrylic,
Polyester.
Delicate
Rating
Dry
in
Liter
(Option)
(Cold,
(shirts, night dresses,
Main+(Pre)
pajamas...)and lightly soiled 30,40,
95)
white cotton (underwear...)
Cotton-Eco
Water
Washing
)
30
(Cold, 40 )
Main
Main
90
Small, big)
3kg
60
1kg
48
2kg
52
1kg
48
2kg
52
1kg
48
5kg
48
-
61
-
-
61
-
-
60
2kg
40
-
(Auto,
Time Add,
30
Small, big)
If the
laundry is heavily soiled, Pre Wash course is recommended.
Cotton-Eco, Cotton, Synthetic program.
Water Temperature : Select the water temperature to the wash cycles. Always follow garment
manufacture s care label or instructions when laundering.
:
Pre Wash is available in
13
H
ow
to
use
washer
No Sp
1. Cotton
3. Auto half load.
automatically
selected upon power
on.
Auto half load
Press the
) button
Power(
to start.
Press the Start/Pause button.
Initial condition
saves you time and
when
money
washing smaller loads.
The washing machine is fitted with a self
adjusting
water level
system.
This system enables the machine to
-
Wash
:
Main wash
the amount of water needed to wash
-
Rinse
:
3 times
and rinse the
-
-
-
Spin : 1400 rpm [WD-14124(6)RD]
1200 rpm [WD-12124(6)RD]
Water temperature
:
Program : Cotton
2. Manual
Press the
Selecting
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
For
selecting the
each
conditions, please
refer to the page 15~page22
Press the Start/Pause button.
14
particular
laundry
load.
use
in relation to the
ow
H
to
use
washer
Sav
ay
1200
95
1000
60
800
40
400
30
me
Rneold
Super
Cold
Normal
Man
Add
Auo
Bg
Sma
(1) Button : Start/Pause
(2) Dial : Program
(3) Button : Wash
(4) Child Lock
(5)
(6)
(7)
(8)
Button
Button
Button
Button
:
Rinse
:
Spin
:
Time Delay
Water Temp.
:
(9) Button : Time Save
(10) Button : Dry
(11) Door Lock
(12) Button : Power
Start/Pause
Program
7 programs are available
according
laundry type.
-
-
-
-
1. Start
-
This Start/Pause button is used to start
-
-
wash
cycle
or
pause the wash
cycle.
ash
Synthetic
Qu
30
Delicate
Wool
ck-
Hand Wash
Quick 30
will
light
up to indicate selected
1. Program
When Start/Pause button is
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
at the end of the wash
Hand
program.
If temporary stop of wash cycle is needed,
press iStart/Pausei button.
or
to the
cate
Cotton-Eco
Cotton
Lamp
2. Pause
De
pressed,
Cotton/Eco program is automatically
selected.
-
By turning the Program dial, the program is
Cotton
Synthetic
selected in order of
cycle.
Delicate
Wool
"
Hand Wash
Quick 30
Cotton-Eco".
Regarding to the laundry type for each program
Please refer to the page13.
2. Course
-
Cotton-Eco
-
-
Cotton
-
-
-
Synthetic
-
Wool
Hand Wash
Quick 30
Delicate
15
ow
H
to
use
washer
Wash
Child lock
By pressing the Wash
button, the wash type
can
-
be selected.
If you choose to lock the buttons on the
control assembly to prevent tampering, this
Main
-Pre+Main
function may be selected.
1. Child lock
1. Main
Child lock
Main
course
is available for
lightly
or
normally soiled laundry.
2. Pre
If the
+
by pressing and
and Rinse button
Main
ime Left
is effective.
Pre Wash is available in Cotton-Eco, Cotton
Synthetic program.
The
be set
laundry is heavily soiled,
course
and
can
holding the Wash
simultaneously.
required lamp
identification.
will
light up for
When child lock is set, all buttons
are
inoperable.
To deactivate Child lock system, press and
hold the Wash and Rinse button
simultaneously again.
ime Left
To
change
to the desired program, whilst in
child lock mode.
1. Press and hold both Wash and Rinse
button
together once again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
Change
the desired
program
The child lock
is
errors occur.
power is off.
16
can
be set at any time and it
automatically canceled when operational
Also Child lock works when
H
ow
to
use
washer
Rinse
Spin
By pressing the Rinse
button, the Rinse type
can
be selected.
-
-
-
-
Normal
Super
Normal + Rinse Hold
Super + Rinse Hold
[WD-12124(6)RD]
1. Normal
By pressing
can
Cotton-Eco / Cotton /
Synthetic performs 3
Rinses
-
Delicate / Wool / Hand Wash
/Quick 30
performs 2 Rinses
2. Super
Normal
+
1
Use the
Spin
button, the
spin speed
be chosen.
[WD-12124(6)RD]
No Spin
[WD-14124(6)RD]
No Spin
-
-
400
-
400
-
800
-
800
-
1000
-
1000
-
1200
-
1400
1. Spin selection
more
rinse time.
Spin speed
rinse when additional
Super
rinsing is desired to remove
and detergent soiled loads.
excess
dirt
program
-
Is selected
by pressing the Rinse button
repeatedly
this function leaves clothes in the
washer; suspended in the
entering
into
water after a rinse
spin.
as
is available
-
according
to the
follows.
Cotton-Eco / Cotton / Quick 30
[WD-14124(6)RD]
No Spin
400
800
[WD-12124(6)RD]
No Spin
400
800
3. Rinse Hold
without
[WD-14124(6)RD]
the
1000
1400
1000
1200
Synthetic / Wool / Hand Wash
400
800
1000
Spin
No
-
Delicate
No
Spin
400
800
If you want to drain and spin, when Rinse
Hold function is proceed, Press the
Start/Pause button to cancel the Rinse Hold
function and select spin speed or program.
Press the Start/Pause button again to start
program.
If you want to drain
only, select the No Spin
program.
The
required lamp
will
light up for identification.
17
to
ow
H
use
washer
2. No Spin
Time
If No
after
It is
Spin is selected,
draining water.
possible
the washer stops
to remove this
rinse when No
Spin
spin
on
the
is selected
on
the
Wool, Delicate and Hand Wash program.
The
required lamp
identification.
will
Delay
1. Time
light up for
Delay
Preparing washing before starting
Delay
Turn on the water tap.
Time
-
-
-
Load
laundry and close the door.
detergent and fabric softener
Place the
in
the drawer.
How to set Time
-
-
-
Delay
Power( ) button.
Turn the Program dial to select
the program you require.
Press Time Delay button and set the
Press
desired time.
-
Press the Start/Pause button.
(
Time
If Time
Delay blinks.)
Delay
displayed.
button is
pressed, 3:00 is
delayed time is
The maximum
19:00 hours and the minimum time is 3:00
hours.
Each pressing of the button advances time
delay by one hour.
To cancel the time
Power(
Time
)
delay, press the
button.
expected time from the
present
completion of washing cycle
or selected process (Wash, Rinse, Spin).
Delay
is
to the
According to the
condition
of water supply and
temperature, the delayed time and the actual
washing time may vary.
18
H
ow
to
use
washer
Time Save
Water Temp.
By pressing the Temp.
Time Save
button, the water
temperature can be
selected.
-
Cold
-30
/40
/60
/95
1. Time Save
This
of
To
1. Water Temperature
a
option
-
-
-
Cotton-Eco
40
60
Cotton
Cold
30
be used to reduce the time
once
option press the Time Save
before the wash program is
started.
This
option is
not available with Quick 30
program.
40
60
40
60
95
Synthetic
Cold
-
as
this
use
button
Water temperature can be selected
below according to the program.
can
wash program.
30
Delicate & Wool & Quick 30 & Hand Wash
Cold
30
40
The
required temperature lamp
identification.
For the
more
detailed
will
light up for
information, please refer
to the page 13.
19
ow
H
to
use
washer
2. Drying
Dry
washer-dryer s
Your
automatical process from
washing to drying can be
When
This
selected
make
even
sure
all articles in
are
similar in material and
thickness.
If you open door and
dryer has finished its
remove
By pressing
is
dry,
-
ended after about 4 hours.
Some
their
Cooling Cycle.
-
can
Dry button,
the
drying
time
drying times are given as a guide to
help you set your dryer for manual drying.
Drying times can vary greatly depending on
dampness, room temperature and type of
fabric and your own experience will be your
best guide.
From 10min to 90min selectable
10min is added
by pressing dry
button.
Auto
(120min) : Cotton 3.6kg
: Towel 3.5kg
(60min) : Cotton 2kg
Big(150min)
Small
20
on
out
Do not overload your
immediately after
Synthetics
dryer.
Take out permanent press articles as
as the dryer stops to reduce wrinkles.
or
soon
Leather Materials
Always check the manufacture
s
Always
an
Night Gowns
check the manufacture
s
instructions.
These
:
loopknit materials may
quality.
Baby Clothes
-
be selected.
Time Add
Materials
instructions.
(Manual operation)
the
and
Always stretch them
drying.
Fibre
By pressing
Loopknit
woven
Permanent Press and
-
-
1. Drying Time Guide
freely.
shrink, by varying amounts, depending
displayed.
the Start/Pause button the
tumble
can
dry woolen articles. Pull them
original shape, they ary them flat.
Woven and
-
program can be ended. If you not press
the Start/Pause button, the program is
they
Do not tumble
to their
load before
press the Start/Pause button.
After the end of
that
Woolen Articles
remember to
cycle,
3.6kg
Items should not be loaded in a tangled
as this will lengthen the drying time.
too
many articles into drum. Items must be
able to tumble freely.
load of up to
condition,
-
dryer by stuffing
so
a
shake out each handful of
loading,
clothes
drying,
the clothes load
Do not overload
dryer can handle
dry weight of articles.
easily.
For most
guide
Rubber and Plastics
-
Do not dry any items made from or
containing rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and tablecloths
Fiberglass
-
Do not
dry fiberglass articles
in your
dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time you
use the dryer and irritate your skin.
ow
H
to
use
washer
Power
3. Completion of Drying
When
drying cycle is completed,
[COOL DOWN] is displayed on the
Multi
display.
The COOL DOWN is
automatically when
complete.
a
setting
drying cycle
is
1. Power
When you are not remove a load of
clothes from the dryer as soon as it
stops, wrinkles
can
The COOL DOWN
form.
operating periodically
tumbles, rearranges and fluffs the load
to
avoid wrinkles without heat for up to 4
hours.
message will continue to display
until the clothes are removed or the
The
Start/Pause button is pressed.
Press the
Power(
on
and off.
power
button to turn
To cancel the Time Delay function, the
Power( ) button should be pressed.
2. Initial Program
When the Power(
) button is pressed,
the washer is ready for Cotton program.
And the other initial conditions as
follows.
So, if you
Door Lock
)
want to advance into the
washing cycle without changing the
program, just press Start/Pause button
and then the washer will proceed.
Initial program
[WD-14124(6)RD]
It shows whether the door
or
can
be open
When the
be open.
Cotton
Program / Main
wash /
Normal Rinse / 1400 rpm / 60 C
not.
lamp
is on, the door
can
not
[WD-12124(6)RD]
Cotton
Program / Main
wash /
Normal Rinse / 1200 rpm / 60 C
21
ow
H
to
washer
use
3. Completion of
Display
washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
display
When Child lock is selected, the
is displayed.
"
"
After the end of
dry,
"
"
is
displayed.
delay is selected, it shows
remaining times to finish the selected
"
4. Time left
During washing cycle, the remaining
washing time is displayed.
Recommended program
When time
the
program.
2. Self
-
-
-
diagnose display
-
If the washer encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
a
fault
during
the associated fault will be
-
:
Water pressure
:
Problem of
:
Door is not closed
sensing
overfilling
:
Over load in motor
:
Over load in motor
:
Water inlet trouble
:
Drainage
-
error
Cotton-Eco : around 3 hours and
Cotton : around 2 hours and
Synthetic
:
manufacturer.
1(3)
41(43)
minutes
minutes
around 1 hour and 30 minutes
Delicate : around 1 hour and 1 minute
Wool : around 1 hour and 1 minute
Hand Wash : around 1 hour
Quick 30
:
around 30 minutes
water
trouble
The
washing time may vary by the
laundry, water pressure, water
temperature and other washing conditions.
amount of
If
an
unbalanced load is detected
or
:
Unbalanced load
:
Water temperature trouble
(Max. increasing
:
Dry
heater
or
thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page28 and
follow the guide.
suds
if the
removing program operates, the
wash time may be extended.
"
22
-
by
time is
45minutes.)
M
aintenance
Before
the washer interior,
cleaning
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
-"
"error message will blink
detergent
-
If your water is very hard
become
on
the control
when water does not enter the
panel
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
objects
ensure
left in the
smooth
laundry.
running of your machine.
the drain and then open the pump filter to
remove
whatever
any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before
emptying
1.
or
opening
Open the lower cover
cap ( ) by using a
the door in
2.
this time
plug ( )
water
the hose.
pull
out
cleaning
the drain pump,
use a
flowing
carrying
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
to
an
3. Remove any
At
vessel to prevent
on
to the floor. When
foreign
from the pump filter
cleaning,
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
After
turn the pump filter
water does not flow any more, turn
( )
material
( ).
original place.
cover
cap.
100
3
1
3
2
2
23
aintenance
M
Dispenser
After
a
while
drawer
and fabric softeners leave
detergents
a
deposit
It should be cleaned from time to time with
of
If necessary it
the machine
can
be removed
a jet
completely from
by pulling it out.
cleaning, the upper part
running
in the drawer.
water.
by pressing
the catch
downward and
To facilitate
of the fabric softener compartment
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
recess
also accumulate inside the
Once you have finished
rinse
without
cycle
The
washing
If you live in
seen
with
occasionally
a
recess
old toothbrush.
an
cleaning, replace
the drawer and
run a
laundry.
drum
hard water area, limescale may
and thus not
which should
easily
continuously
build up in
places
where it cannot be
removed.
Over time the build up of scale
clogs appliances,
and if it is not
kept
in check these may have to be
replaced.
Although the washing drum is made of Stainless steel, specks of rust
articles (paper clips, safety pins) which have been left in the drum.
The
washing
If you
use
can
be caused
descaling agents, dyes
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
24
use
small metal
drum should be cleaned from time to time.
sure
they
are
suitable for
washing
use.
Never
by
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
Immediately wipe off any spills. Wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
NOTE
Remove hard water
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
to
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer, drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
upright position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
25
T roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function at all, check the
following points before you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service centre.
Thumping
sound
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
out of balance.
If not removed
been removed?
Are all the feet
the
probably
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
during
installation, refer to Installation guide
resting firmly
on
for
removing
transit bolts.
Wash load may be
distributed
ground?
in drum.
Stop
unevenly
washer and
rearrange wash load.
Fill hoses
Water leaks.
at
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
detergent may
foaming which
or
cause
unsuitable
excessive
may result in water
leaks.
Water does not enter
washer
or
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
are
open tap.
Straighten hose(s).
Check the filter of the inlet
clogged.
Water in the washer
does not drain
drains
26
slowly.
Drain hose is kinked
or
clogged.
or
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter.
hose(s).
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace fuse.
capacity.
or
circuit overload, have
it corrected
Water
supply tap
is not turned
Turn
by a qualified electrician.
on water supply tap.
on.
Washer
won t
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Once started, the door can not be
for safety reasons.
Door does not open
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
removing program works, the
wash time shall be increased.
Dry problem
Does not
dry
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
a
few towels.
27
T roubleshooting guide
Possible Cause
Symptom
Water
Water
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Solution
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet
hose(s).
clogged.
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
straighten the
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
unbalance
detection and correction system. If
individual heavy articles are loaded
or
drain hose.
2 similar items to
help
load to allow proper
(ex. bath mat, both robe, etc.), this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
Is the door
opened?
Close the door.
If
is not released, call for service.
Unplug the
power
plug
and call for
service.
Water overfills due to the
faulty water
valve.
Close the water tap.
Unplug the power plug.
Call for service.
Water level
sensor
has malfunctioned.
Over load in motor.
Over load in motor.
Check water
supply.
Turn the water tapon.
If
is not released,
power
28
plug
unplug
and call for service.
T
erms
of Warranty
What Is Not Covered:
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
Provide instruction
on use
If the fault is caused
Noise
or
of
product
change
or
by pests for example,
Correcting
or
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
the set-up of the
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
Normal maintenance which recommended
Removal of
foreign objects
Incidental
example, grit, nails,
in or correct house
Correction of unauthorized
the
owner s
wiring
or
the
correct house
plumbing.
repairs.
or
product
including
bra wires, buttons etc.
consequential damage to personal property
possible defects with this appliance.
If this
manual.
/ substances from the machine,
pump and inlet hose filter for
Replace fuses
by
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
29
a
M
30
emo
P/No.:3828ER3021V
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising