LG V190 Owner's manual

LG V190 Owner's manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
V190
PAL SECAM
Before connecting, operating or adjusting this
product, please read this instruction booklet carefully
and completely.
Safety
Precautions
SERIAL NUMBER: The serial number is found
CAUTION
of this unit. This number is
RISK OF ELECTRIC SHOCK
DO NOT OPEN
able to others. You should
here and retain this
guide
on
the back
unique to this unit and not availrecord requested information
as a
permanent record of your
purchase.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Model No.
Serial No.
___________________________________
___________________________________
of your old
Disposal
appliance
1. When this crossed-out wheeled bin
symbol is
product it means the product is
by the European Directive 2002/96/EC.
attached to
covered
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
a
2. All electrical and electronic
an
stream via
ed
electric shock to persons.
by
products should be
separately from the municipal waste
designated collection facilities appoint-
of
disposed
the
government
or
the local authorities.
3. The correct
The exclamation mark within
an
equilateral
disposal of your old appliance will
help prevent potential negative consequences
trian-
for
the environment and human health.
gle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product.
4. For
detailed information about disposal of
appliance, please contact your city office,
waste disposal service or the shop where you
purchased the product.
more
your old
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
CAUTION
TO RAIN OR MOISTURE.
Most
Slots and
from
The
uct
openings
ensure
in the cabinet
reliable
heating.
openings should
operation
are
of the
provided for ventilation
product and to protect
That is,
it
over
on a
be
bed, sofa, rug
should not be
placed
never
or
in
a
be blocked
by placing the prodproduct
other similar surface. This
built-in installation such
rack unless proper ventilation is provided
facturer's instruction have been adhered to.
case or
as a
or
book-
the
appliances
the Power Cord
recommend
they
be
placed
upon
a
dedicated circuit;
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
and to
concerning
manu-
a
single
outlet circuit which powers only that
no additional outlets or branch circuits.
appliance
and has
Check the
specification
page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose
damaged wall outlets, extension cords, frayed power
or
or damaged or cracked wire insulation are dangerAny of these conditions could result in electric shock
or fire. Periodically examine the cord of your appliance, and
if its appearance indicates damage or deterioration, unplug
it,discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized
cords,
ous.
services.
Protect the power cord from
physical or mechanical abuse,
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
outlets,and the point where the cord exits the appliance.
such
CAUTION:
This
To
Digital
Video Disc
Player employs
a
Laser
System.
proper use of this product, please read this
owner's manual carefully and retain for future reference,
as
ensure
should the unit
require maintenance, contact an authorized
procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazservice location-see service
ardous radiation exposure.
To prevent direct exposure to laser beam, do not try to
open the enclosure. Visible laser radiation when open.
DO NOT STARE INTO BEAM.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION: The
apparatus shall
or
such
vases, shall be
2
as
splashing
and that
dripping
placed
not be
exposed to water,
objects filled with liquids,
no
on
the
apparatus.
To disconnect power from the mains, pull out the mains
cord plug. When installing the product, ensure that the plug
is
easily
accessible.
This
product
is manufactured to
radio interference
requirements
comply
with the
of EEC DIREC-
TIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
Table of Contents
Introduction
Operation
SafetyPrecautions.........................2
Operationwithtape.....................19-22
Playingatape..........................19
.19
CM(CommercialMessage)Skip.
OPR (Optimum Picture Response).
19
InstantTimerRecording...................20
Timer recording using On Screen Display
21-22
.23-25
AdditionalOperation-VCRpart.
Hi-FiStereoSoundSystem................23
OnScreenDisplay(F.OSD)................23
TapeCounterMemoryStop................23
TableofContents..........................3
BeforeUse..............................4-5
AbouttheSymbolDisplay..............4
SymbolusedinthisManual...............4
NotesonDiscs.........................4
HandlingDiscs.........................4
StoringDiscs..........................4
CleaningDiscs.........................4
.4
SelectingtheViewingSource.
TypesofPlayableDiscs...................5
RegionalCode..........................5
.
.
.
.
.
.
.
.
.
.
.
.
FrontPanel...............................6
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
to
TV &
9
Connecting
Decoder(or Satellite)
.10
ConnectingtoOptionalEquipment.
.11-14
BeforeOperation-VCRpart.
.11
UsingyourVCRfortheveryfirsttime.
SettingtheclockManually.................11
Tosetthecoloursystem..................11
a
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder.......................23
.24
VideoDoctor(Self-Diagnosis).
Lock(ChildLock)........................24
.24
WideScreenCompatibility16:9.
1WMode(Powersavemode)..............24
25
Recording from External Components
CopyingfromDVDtoVCR.................25
.26
GeneralPlaybackfeatures-DVDPart.
PlayingaDVDorVideoCD..................27
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Additionalfeatures.......................27
3DSurround........................27
.
.
TimeSearch........................27
MarkerSearch......................27
LastSceneMemory..................27
Howtousethemainmenu.................12
ScreenSaver.......................27
.12
TuninginTVStationsAutomatically.
.13
TuninginTVStationsManually.
.14
ChangingtheorderofTVStations.
DeletingTVStations.....................14
.15-18
BeforeOperation-DVDpart.
Disc
Information
on-screen
15
Displaying
InitialSettings..........................15
GeneralOperation.......................15
.28
PlayinganAudioCDorMP3/WMAfile
ProgrammedPlayback....................28
.28
RepeatProgrammedTracks.
.28
ErasingaTrackfromProgramList.
.28
ErasingtheCompleteProgramList.
ViewingaJPEGfile.......................29
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE............................16
MenuLanguage......................16
DiscAudio/Subtitle/Menu.
.
.
.
.
.
.
.
.
.
.
.
.16
DISPLAY..............................16
TVAspect..........................16
DisplayMode........................16
ProgressiveScan.....................16
TVOutputSelect.....................16
AUDIO................................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow.............................29
StillPicture............................29
MovingtoanotherFile....................29
Zoom.................................29
Torotatepicture.........................29
PlayingaDivXMoviefile...................30
PlayingaDVDVRformatDisc...............31
AdditionalOperation.......................32
32
Controlling other TVs with the remote control
.
.
.
MaintenanceandService..................32
Reference
.17
DolbyDigital/DTS/MPEG.
SampleFreq.(Frequency)..............17
.17
DRC(DynamicRangeControl).
LanguageandAreaCodeList...............33
LanguageCodeList......................33
Vocal..............................17
AreaCodeList..........................33
LOCK(ParentalControl)..................17
Rating.............................17
Password(SecurityCode)..............17
Troubleshooting..........................34
Specification.............................35
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AreaCode..........................18
OTHERS..............................18
PBC..............................18
AutoPlay..........................18
DivX(R)VOD........................18
Introducin
Before Use
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future reference.
Notes
on
This manual
Handling
Discs
provides
information
on
the
operation and
require
maintenance of your DVD player. Should the unit
service, contact an authorized service location.
Discs
Do not touch the
by
the
edges
so
playback side of the disc. Hold the disc
fingerprints do not get on the sur-
that
face. Never stick paper
About the
"
or
tape
on
the disc.
Symbol Display
"
may appear on your TV
and indicates that the function
manual is not available
Symbol
on
display during operation
explained in this owner's
that specific DVD video disc.
Used in this Manual
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
applicable only
ALL
making
the task easier.
of the following symbols
represented by the symbol.
one
to the disc
is
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the
center out.
All discs listed below
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
WMA
WMA files
spray intended for older
DivX
DivX files
Selecting
the
You must select
VCR)
to view
vinyl
records.
Viewing Source
of your output
the TV screen.
one
on
sources
(DVD
or
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
lights
TV
and
output
source
of DVD deck is viewed
on
the
screen.
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
lights
TV
and
output
source
of VCR deck is viewed
on
the
screen.
Notes:
?
?
If you insert a disc while this unit is in the VCR mode,
this unit will switch to DVD mode automatically.
If you insert a cassette tape without prevention tab
while this unit is in the DVD mode, this unit will switch
to VCR mode
4
automatically.
Before Use
of
Types
(Continued)
Notes
Discs
Playable
on
Copyrights:
It is forbidden
DVD
cast via
(8cm/12cmdisc)
al without
by
law to copy, broadcast, show, broador rent copyrighted materi-
cable, play in public,
permission. This product features the copy
protection function developed by Macrovision. Copy protection signals are recorded on some discs. When
recording and playing the pictures of these discs picture
noise will appear. This product incorporates copyright
protection technology that is protected by method
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
claims of certain U.S.
patents and other intellectual
property rights owned by Macrovision Corporation and
In addition, this unit plays DVD±R/RW, CD-R/RW and
SVCD that contains audio titles, DivX, MP3, WMA,
and/or JPEG files.
This indicates
a product feature that is capable
playing DVD-RW discs recorded with Video
Recording format.
of
other
Use of this
rights
copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
owners.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPAT-
Notes:
?
?
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
on
Do not
use
irregularly shaped CDs (e.g., heartoctagonal) since they may result in mal-
shaped
or
functions.
?
This unit
requires
playback quality.
recordings
Pre-recorded DVDs
set to these standards. There
to meet
cer-
are
are
optimal
automatically
many different types
of recordable disc formats
(including CD-R containing
MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible
playback.
Customers should note that
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
Regional Code
This unit has
a
unit. This unit
can
the
rear
Notes
?
regional code printed on the rear of the
play only DVD discs labelled same as
of the unit
on
or
Regional
"ALL".
Codes
Most DVD discs have
bers in it
clearly
globe
a
visible
must match your unit's
not play.
?
FACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS,
IT IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE 'STANDARD DEFINITION'
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
625p
discs and
tain technical standards in order to achieve
required
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI-
on
the
with
one or more num-
cover.
regional
code
This number
or
the disc
can-
If you try to play a DVD with a different regional code
from your player, the message "Check Regional
Code" appears on the TV screen.
DVD PLAYER, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
Introducin
Front Panel
1
2
3
45
16
1.
8.
Disc
OFF.
PROG.
DVD/VCR Selector
Stops playback.
(V/v)
Programme
10. ./m
Go to
Selectors.
Opens
or
Display
beginning of current chapter/track
chapter/track.
or
to
PREVIOUS
DVD
4.
DVD/VCR
9.A
disc here.
a
Channel
5.
or
Tray
Insert
3.
17
1/I
Switches the unit to ON
2.
6789101112131415
closes the disc
Press and hold for two seconds for
tray.
search. Rewinds the
window
a
fast
reverse
tape.
11. N
Shows the current status of the unit.
Starts
DVD: DVD deck is selected.
playback.
12. M/>
:
[P]:
:
A disc is loaded in the DVD deck.
Indicates the
Progressive
:
Indicates
:
Child Lock is
repeat
:
is
search. Winds the
engaged.
recording
or a
timer
programmed.
is
:
Indicates total
6.
Remote Sensor
Point the remote control here.
7.
Tape Compartment
(L/R)
Jacks
VCR
16. O
VCR Record
20.)
playing time/elapsed
time/current time.
fast forward
Tape Eject
engaged.
DVD to VHS copy is in progress.
TV: Indicates TV mode. (See Notes on page
14. Audio IN
15.
VCR: VCR deck is selected.
recording
a
tape forwards.
13. Video IN Jack
A Cassette is in the VCR deck.
REC: VCR
chapter/track.
Press and hold for two seconds for
mode.
DVD+VCR is in timer
recording
Go to NEXT
Scan is set to On mode.
17. INPUT
Select
input
source
for
recording
into
tape.
Remote Control
POWER
Switch this unit ON
or
TV Control Buttons
OFF.
TVPOWER:Turns
DVD/VCR select button
operational mode of
TV AV: Selects the TV's
Selects
TV VOL +/--:
OPEN/CLOSE
close the disc
tray.
a menu.
Select
VCR: Rewinds the
mode, for fast
To control vertical tremble
into
picture
tape.
ENTER/OK
Access
tape during the
Access
setup
menu.
the
of
menu
a
video CD
Select
an
audio
language (DVD).
SUBTITLE
Select
subtitle
a
language.
ANGLE
Select DVD
camera
angle
if available
ZOOM
Enlarge
video
REC/ITR
image.
(O)
Record your
LOCK
input sources
(Child Lock)
Switch the Child Lock
on
into
tape.
and off.
TITLE
Display
the title
menu
of the disc if
available.
menu.
PROGRAM
CLEAR
Access
the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
or remove
menu.
program
A-B/LP
Repeat sequence.
Select the recording
speed
of the
tape.
REPEAT
Repeat chapter, track, title,
DVD disc.
AUDIO
SEARCH
on
or remove
Displays
point during playback.
track number
a
with PBC.
MARKER
a
of
RETURN
search.
Clear
menu
SETUP/ i
reverse
MARKER SEARCH
selection.
menu
DISC MENU
forward.
or
during
still.
Acknowledge
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous
chapter or track.
PAUSE/STEP (X)
Pause playback temporarily / press
repeatedly for frame-by-frame
playback.
PLAY ( N )
Starts playback.
STOP(A)
Stops playback.
Display
menu.
recording
picture
search and Advances the tape during
the STOP mode, fast forward picture
Mark any
item in the
PR/TRK(+/-)
(m/M)
STOP
an
Select channel programme of VCR.
To adjust tracking.
BACKWARD / FORWARD
DVD: Search backward
or
FGDE(left/right/up/down)
AV
for
Introducin
Display.
counter.
Switch between your TV's tuner
and the VCR's internal tuner.
source
TV's volume.
Shows you the current time
TV/VCR
input
Adjusts
Access the On-Screen
0-9 numerical buttons
Select
source.
CLK/CNT
Tape Eject.
Select numbered items in
32)
DISPLAY
EJECT
or
p.
offtheTV.
TV PR +/--: Selects TV's channel.
remote control.
Open
(see
on or
RANDOM/CM SKIP
all.
Play
tracks in random order.
CM SKIP
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
and press
Detach the
the buttons.
AAA AAA
Do not mix old and
new
batteries and
different
types of batteries such
alkaline,
etc.
as
never
mix
battery
installation
battery
cover on
the
rear
of the
control, and insert two batteries (size
with
3 and # aligned correctly.).
AAA)
remote
standard,
7
Rear Panel
AERIAL
Connect the aerial
using
this
jack.
VIDEO/AUDIO
Connect to
a
OUT(Left/Right) (DVD/VCR OUT)
inputs.
TV with video and audio
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
TV with Y Pb Pr
AUDIO OUT
Connect to
(Y
Pb
Pr)
OUT)
inputs.
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
EURO AV2 DECODER
Connect to
pay-TV
decoder
or
another video recorder.
AC Power Cord
Connect to
EURO AV1 AUDIO/VIDEO
Connect to your TV set
COAXIAL
RF.OUT
Do not touch the inner
pins
Electrostatic
may
discharge
using
this
of the
cause
jack.
jacks
IN+OUT / DVD
on
the
rear
panel.
permanent damage
to the unit.
power
OUT)
another video recorder.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
Connect to
Connect to your TV
(VCR
or
a
source.
Connections
Caution:
Make
DVD exclusive out connection
sure
this unit is connected
Set the TV to the correct video
directly to the
input channel.
Do not connect this unit's AUDIO OUT
phone
in
jack (record deck)
Connecting to
(or Satellite)
Make
the
one
of the
capabilities
1.
to the
TV & Decoder
2.
Progressive Scan
the SCART
lead
input
on
the
socket
on
rear
the
resolution
to this unit
a
or
decoder
1.
(S2).
(DVD/VCR OUT) jacks on the
DVD Player to the corresponding in jacks on the TV
using the video cable (V).
Connect the Left and Right or AUDIO (DVD/VCR
OUT) jacks of the DVD+VCR to the audio left/right in
jacks on the TV using the audio cables (A1).
possible.
2.
in
jacks on the DVD Player
jacks on the TV using the
Connect the Left and
MIERE)
are
signals (CANAL+
not decoded in the 1W Mode
Basic connection
or
PRE-
(see p. 24).
(RF)
Notes:
Connect the
RF.OUT
Progressive to "On" on the setup
progressive signal, see page 16.
supplied
jack
on
the
scan
(yellow
VIDEO OUT
AERIAL
VIDEO
INPUT
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pb
panel
Input (R).
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pr
Pb
SCART INPUT
Y
C
VIDEO
INPUT
AUDIO INPUT
A2
SCART INPUT
AUDIO INPUT
Y
VA 1
Decoder
(or Satellite)
S1
S2
Rear of this unit
(Basic connection)
Rear of this unit
(DVD
exclusive out
for
analog
jack).
of this unit to your
Rear of TV
AERIAL
menu
RF antenna cable from the
rear
television's Antenna
does not work with the
Progressive
connections
Pr
this unit.
the
the audio cables.
Rear of TV
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel of
corre-
Y Pb Pr cable.
Right AUDIO OUT jacks of
left/right in jacks on the TV
this unit to the audio
using
to the
Set the
The encoded television
R
"digital ready"
Connect the COMPONENT/ PROGRESSIVE SCAN
sponding
Connect the VIDEO
Note:
2.
or
VIDEO OUT
or
1.
high-definition
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
Some TV broadcasters transmit encoded television
purchased
a
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
(S1).
which you can only see with a
rented decoder. You can connect such
2.
connection
If your television is
signals
1.
jacks on the DVD Player to the
corresponding in jacks on the TV using the Y Pb Pr
cable (C).
Connect the Left and Right AUDIO OUT jacks of this
unit to the audio left/right in jacks on the TV using
the audio cables (A2).
on
(AV)
Connect the EURO AV1 AUDIO/VIDEO
(descrambler)
connection
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
system.
following connections, depending
existing equipment.
panel of this unit to
TV using a SCART
2.
Component Video
of your
Basic connection
1.
a
jack
of your audio
TV.
connection)
video
Prepa tion
Connections
Connecting
to
(Continued)
Optional Equipment
Rear of this unit
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
Connect the Left and
AUDIO OUT
Right
DVD/VCR AUDIO OUT
or
OUT) jacks on this
to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
(DVD
EXCLUSIVE
unit
Connecting to an amplifier equipped with two channel
digital stereo (PCM) or to an Audio/ Video receiver
equipped with a multi-channel decoder (Dolby
DigitalTM, MPEG 2 or DTS)
1.
Connect
one
of this unit's DIGITAL AUDIO OUT
to the
(COAXIAL)
amplifier. Use
an
in
corresponding
jack
optional digital (coaxial)
jack
or
DVD exclusive out
DVD/VCR OUT
on
your
audio
cable.
2.
You will need to activate this unit's
"AUDIO"
(See
Digital
on
page
digital output.
17).
Multi-channel sound
COA
A
digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that
supports
one or more
of the
L
IAL
DIGITAL INPUT
R
AUDIO INPUT
Amplifier (Receiver)
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Digital multi-channel connection
(DVD exclusive out connecttion)
Warning:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Notes:
If the audio format of the
the
capabilities of
produce a strong,
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Manufactured under license from
"Dolby",
Dolby Laboratories.
Logic" and the double-D symbol are
of Dolby Laboratories.
"Pro
trademarks
DTS and DTS
Theater
10
Digital Out
Systems, Inc.
are
trademarks of
Digital
Rear of this unit
Before
Operation-VCR part
Using your VCR
for the very first
time
will
Following picture
display
the TV
on
screen
when
you have just connected your video recorder for the
very first time.
To make
as
tuning
TV stations,
follow
please
(see p.12).
shown "ACMS"
stages
3 to 4
To set the colour system
1.
Press i.
2.
The main
3.
Press 1
menu
or
will appear
on
the TV
screen.
2 to select the SYS and press
ENTER/OK.
4.
Press 3
or
4 to select
according
to the COLOUR
system used.
AUTO: automatic colour selection,
PA L : PA L recordings
SECAM: SECAM
recordings
recordings.
MESECAM: MESECAM
A
B
CH
NN L
DDKE
I
PSSFOTHERS
Pr-12
ACMS
Setting
the clock
Manually
fOS
The clock in your DVD+VCR controls time and date settings for your DVD+VCR.
The clock is set
automatically during ACMS (Automatic
Channel Memory System) when your DVD+VCR
detects a channel that broadcasts a Teletext signal.
If the broadcast signal is weak the clock will not be set
and will require setting manually.
1.
Press i.
Press b
to select SET.
or B
Press ENTER/OK.
The ACSS mode
can
be set to "OFF"
by pressing
ENTER/OK if you want to set the time
manually.
HHMMDDMMYY
:.
-
-
--
--
--
---
.
ACSS
ON
:
SET
2.
Use the v
V on
or
the remote control to alter the
HOURS, MINUTES, DAY,
MONTH and YEAR.
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The
day
of the week will appear
automatically
when
you enter the year.
HHMMDDMMYY
8
:.
00101
SUN
.
ACSS
:
OFF
SET
3.
If you make
a
mistake press b
or B
correct details.
4.
Press i to return to
a
TV
picture.
and enter the
ON
OFF
5.
Press i to
remove
the
menus
from the TV
screen
Prepa tion
Before
How to
Operation-VCR part
use
This DVD+VCR
menus
The
can
displayed
menus are
the main
be
easily
Tuning
menu
programmed by using
the
by
If the TV broadcast
signal
Automatically
is weak your DVD+VCR may
not detect the necessary information and will not be able
to store them correctly. To overcome this problem please
on screen.
controlled
in TV Stations
the Remote Control
Handset.
turn to the MANUAL TUNING section
1.
Switch
your TV set and DVD+VCR
POWER button.
2.
Press i button.
by pressing
on
the
1.
2.
The main
menu
will appear
the TV
on
Press POWER to turn
on
page 13.
on
your DVD+VCR.
Press i button.
The main menu will appear on the TV
Press 1 or 2 to select the ACMS.
screen.
screen.
Press ENTER/OK.
SET
SYS
fOSD
A
ON
OFF
SET
Timer
PR SET
ACMS
SET
SYS
-
-
-
-
recording setting (see
Manual
tuning setting (see
ACMS
Channel
(Automatic
System) (see p. 12).
Date & clock
setting (see
To set the Colour TV
1 W ON/OFF
(Dr.)
p.
-
-
problem
ACMS
3.
13).
p.
Memory
(see
p.
4.
Press ENTER/OK to start the automatic
the channels of the TV stations in your
with your VCR
-
To
display
the
operational
mode of your VCR
(see
(16:9/4:3)
-
area
with 1
"OTHERS"
11).
24).
to your
country according
2.
A:Austria, B:Belgium, CH:Switzerland, D:Germany,
DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,
NL:Netherlands, P:Portugal, S:Sweden, SF:Finland,
11).
p.
Select the
or
storing
of
area.
24).
p.
F.OSD ON/OFF
a
I
21).
System (see
Power Save Mode
To check
(see
p.
DDKE
PSSFOTHERS
Pr-12
ON
OFF
-
CH
Pr-12
fOSD
REC
B
NN L
Pr-12
p.
01
C02
00
TF1
02
C03
00
FR2
03
C04
00
FR3
23).
To select the
aspect ratio of your
S
TV
(see p. 24).
DECODER To use a pay-TV decoder
(or Satellite) with your VCR
(see p. 23).
(OPR) To improve the playback picture
(see p. 19).
Appear when playback only.
NIC To activate or deactivate the NICAM digital
sound (see p. 23).
E
Pr-12
ACMS
-
-
O
5.
The TV STATION TABLE will appear when
Press i to
3.
change the menu language on the DVD setup
(See the Menu Language on page 18.)
Press 1 and 2 to select the desired
Press ENTER/OK and
4.
your
settings.
02
C03
00
FR2
03
C04
00
FR3
04
C05
00
ARTE
05
C06
00
RTP1
06
C07
00
RTP2
07
C08
00
08
C09
00
P
SET
R
can
menu.
save
-
Tip
You
tuning
completed.
Press i to return to
a
use 3 or
TV
picture.
menu.
4 to select.
RTPAF
RTPAZ
MOVE
:
DELETE
:
,
Notes:
The DVD+VCR's clock will be set
automatic
please
automatically
when
tuning has finished. If the clock is wrong
see "Setting the clock Manually" on page 11.
is
Before
in TV Stations
Tuning
In certain
Operation-VCR part
areas
of the
6.
Manually
country broadcast signals may
ually
1.
will
stop when it locates
a
stations.
Press 2 to select MFT.
be too weak for your DVD+VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
Press ENTER/OK
Searching
Control the fine
tuning
of the station
by using
3 or 4.
man-
in order for your DVD+VCR to store them.
Press i.
The main
menu will appear on the TV
Press 1or2toselectthePRSET.
PR
CH
04
C04
STATION
MFT
screen.
CHANNEL/CABLE
:
AV
P
SET
R
Press ENTER/OK.
7.
PR
CH
MFT
STATION
00
PR-03
01
SET
8.
SYS
fOSD
CHANNEL/CABLE
ON
OFF
:
that you may
so
name
your TV station.
Press ENTER/OK.
Pr-12
ACMS
Press 2 to select STATION
AV
PSET
R
Use 3
or
station
name.
Use 1
or
4 to select letters and numbers for the
2 to
move
back and forth between
characters.
2.
Press i.
Press ENTER/OK.
The station table will appear.
3.
Press 3
or
4 to select the programme number that
you want to tune
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
05
06
07
08
04).
PR-03
--
--
-----
--
--
-----
--
--
--
--
P
SET
R
4.
PR
(for example,
9.
-----
:
DELETE
:
MFT
00
Press i, confirm the station
STATION
placement.
,
Press ENTER/OK.
Press AV to select C
CH
C04
P
SET
R
-----
MOVE
PR
04
(Standard stations)
or
S
(Cable
PR
CH
MFT
04
C04
00
STATION
stations):
C02
-
C69, S01
-
S41.
P
SET
R
Enter the channel number of station that you want to
tune,
use 3 or
4 to find the
required
station.
If you wish to
3 9.
stages
PR
CH
04
MFT
STATION
--
----
manually
01
C01
00
02
C02
00
03
C03
00
05
06
CHANNEL/CABLE
:
tune other stations
07
AV
08
P
SET
R
Press ENTER/OK and select the "PAL"
by pressing
or
Your
PR
CH
MFT
C04
00
P
SET
R
STATION
PR-03
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
again.
new
TV station has
DVD+VCR.
04
PR-02
--
"SECAM"
10. Press i
3 or 4.
PR-01
--
P
SET
R
5.
repeat
-
now
been tuned into your
Prepa tion
Before
Operation-VCR part
the order of TV Stations
Changing
tuning TV stations into your DVD+VCR you may
change the order in which they are stored without having to retune them again. The instructions given
on this page will show you how you can simply move
Deleting TV Stations
After
After
wish to
wish to delete
tuning
TV stations into your DVD+VCR you may
a station.
The instructions
you
easily
can
given on this page will show you how
delete any unwanted TV stations.
them into your desired order.
1.
1.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
Press i.
The main
menu will appear on the TV
Use1or2toselectthePRSET.
screen.
Press ENTER/OK.
Press ENTER/OK.
PR
PR
CH
01
MFT
STATION
00
PR-03
SET
ACMS
CH
01
SET
:
PR-03
CHANNEL/CABLE
ON
OFF
CHANNEL/CABLE
STATION
00
SYS
fOSD
SYS
ON
OFF
MFT
Pr-12
ACMS
Pr-12
fOSD
screen.
:
AV
P
SET
R
AV
P
SET
R
2.
2.
Press i.
Press i.
Press 3
want to
or
4 to select the programme number you
3.
Press 3
or
4 to select the programme number you
want to delete.
(for example, PR-03).
move
(for example, PR-01)
Press 2.
02
01
C01
00
PR-01
01
C01
00
PR-01
03
02
C02
00
PR-02
02
C02
00
PR-02
04
05
03
04
05
06
07
08
C04
04
PR-04
00
--
--
-----
05
--
--
-----
06
--
--
-----
07
--
--
-----
08
P
SET
R
MOVE
:
DELETE
:
C04
00
--
-----
--
--
-----
--
--
-----
--
--
-----
Press 3
02
03
04
C01
00
C02
00
C04
00
--
a
-----
MOVE
:
DELETE
:
,
--
--
-----
--
--
-----
--
--
C02
--
C03
07
08
other TV stations
01
C01
00
02
C02
00
03
C04
00
repeat stages
PR-02
PR-04
-----
--
--
-----
--
--
-----
--
--
the
new
PR-01
--
P
SET
R
--
-----
PR-03
00
--
--
-----
--
--
-----
--
--
--
--
P
SET
R
Press ENTER/OK.
The selected programme will be moved to the
programme number.
--
PR-04
00
-----
05
move
repeat stages
PR-04
-----
P
SET
R
remove
--
PR-02
--
06
Press i to
--
If you wish to delete other TV stations
04
08
5.
-----
3-4.
PR-01
03
07
08
-----
--
short while, the selected station will be
02
06
07
--
--
deleted.
05
06
PR-03
--
Press 1.
After
4 to select the programme number you
want to move to (for example, PR-05).
04
PR-04
-----
00
P
SET
R
or
If you wish to
1-4.
C03
08
PR-02
--
P
SET
R
,
01
4.
00
07
4.
3.
00
C04
06
PR-04
--
C02
--
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
5.
Press i to
remove
the
-----
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Before
Operation-DVD part
Disc Information
Displaying
Initial
on-screen
You
can
loaded
1.
display
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup
various information about the disc
on-screen.
Press DISPLAY to show various
Settings
playback
menu
item,
see
pages 15 to 18.
information.
The items
type
displayed differ depending
playing status.
or
on
To
the disc
display
and exit the Menu:
Press SETUP to
display
the
A second press of
menu.
SETUP will take you back to initial
screen.
To go to the next level:
Press B on the remote control.
1/3
1/12
To go back to the previous level:
Press b on the remote control.
0:20:09
General
1 ENG
AB C
1.
1/1
Operation
Press DVD
on
3D SUR
the remote control.
LANGUAGE
Menu
2.
You
select
can
change
Title
an
item
select the
or
(Track)
--
by pressing v / V and
setting by pressing b / B.
Current title
(or track)
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
number/total
number of titles
(or tracks)
Chapter Current chapter number/total number
chapters
Time
Elapsed playing time
Audio
Selected audio language or channel
--
of
--
Move
2.
Subtitle
Angle
Sound
--
--
--
Selected subtitle
Selected
angle/total
3.
number of
angles
Setup
menu
move
The
for
a
few seconds, the
on-screen
4.
screen
then press B
shows the current
as
well
as
setting for the
setting(s).
alternate
Use v / V to select the second desired
press B to
5.
option
to the second level.
selected item,
Note:
appears.
Use v / V to select the desired
to
Selected sound mode
If no button is pressed
display disappears.
Press SETUP.
The
--
Select
move
option
then
to the third level.
Use v / V to select the desired
setting
then press
ENTER/OK to confirm your selection.
Some items require additional steps.
6.
Press SETUP
or N
exit the
Setup
menu.
15
Prepa tion
Before
Operation-DVD part
LANGUAGE
Progressive
Progressive
provides
the
highest quality picflickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
LANGUAGE
Menu
Scan
Scan Video
tures with less
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
To turn On
progressive
scan:
Connect
Move
Language
Select
a
Component Input.
Menu
language for the
information display.
and
component out of this unit to the input of your
monitor/television, set your television or monitor to
Select
VCR and DVD's
setup
menu
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
Disc Audio / Subtitle / Menu
Select the
TV
DVD
Original:
Refers to the
disc
recorded.
was
Mode
Progressive
for the audio track
language you prefer
(disc audio), subtitles, and the disc
Aspect
Display
TV
Output
Scan
On
Off
Select
menu.
original language
in which the
Prev.
Other:To select another
press number
buttons then ENTER/OK to enter the corresponding
language,
according to the language code list in
the reference chapter (see page 33). If you enter the
wrong language code, press CLEAR.
4-digit
2. Select "On"
3.
Pressing
number
scan
using
Move
Enter
the v / V buttons.
ENTER/OK will set this unit to
Progressive
mode.
Caution:
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
an
DISPLAY
On in error, you must reset the unit.
DISPLAY
TV
Mode
Progressive
TV
Output
Scan
Select
Remove any disc from the unit and close the disc
on the display
1)
16:9
Aspect
Display
tray. See that "DISC" is displayed
Widescreen
window.
Off
RGB
Press STOP
2)
on
the remote control and hold it for five
seconds before
Move
releasing it. The video output will be
restored to the standard setting and a picture will
once again be visible on a conventional analog TV or
Select
monitor.
TV
Aspect
4:3
:
16:9
DVD
TV
Select when
:
a
Select when
Display
Display
Mode
standard 4:3 TV is connected.
a
Output
Set this unit TV
TV connection
16:9 wide TV is connected.
setting
works
Output
only
when the TV
Aspect
mode is set to "4:3".
on
upper and
Panscan:
entire
16
Displays a wide picture with
lower portions of the screen.
bands
on
Automatically displays the wide picture
and cuts off the portions that do not
screen
options according
to the
this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
Letterbox:
Select
type.
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
DVD
jacks
Mode
Select
the
on
fit.
the
Before
Operation-DVD part
LOCK (Parental
AUDIO
Each DVD disc has
a
Set this unit's AUDIO
audio
system you
variety of audio output options.
options according to the type of
Control)
LOCK
use.
Rating
Unlock
Password
New
Area Code
FR
AUDIO
Prepa tion
Bitstream
Dolby Digital
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Select
Rating
Move
Blocks
Select
playback
Not all discs
Dolby Digital
DVD
/ DTS / MPEG
DivX
1. Select
Bitstream: Select "Bitstream" if you connect the
DVD+VCR's DIGITAL AUDIO OUT jack to an amplifiother
er or
equipment
with
a
Dolby Digital,
DTS
Off
3. Select
If your receiver
96 kHz
signals,
or
amplifier
is NOT
capable
of
handling
made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
type of signal through without any
Check the documentation for your
amplifier
to
verify
its
thanks to
digital
audio
technology. However,
dynamic range of the
you may wish to compress the
audio output (the difference between the loudest sounds
quietest ones).
movie at
a
This allows you to listen to a
losing clarity of sound.
lower volume without
Set DRC to On for this effect.
a
rating
from 1 to 8
the v / V buttons.
selection,
You
can
enter
or
change password.
1. Select Password
on
2. Follow
shown above
step
2
as
the LOCK
menu
then press B.
(Rating).
change the password, press ENTER/OK when the
"Change" option is highlighted. Input a password and
press ENTER/OK. Enter it again and press
ENTER/OK to verify.
3. Press SETUP to exit the
If you
menu.
forget your password
If you
forget your password,
following steps:
1.
Press SETUP to
2.
Input
the
6-digit
display
you
the
can
clear it
Setup
using
the
menu.
number "210499" and press
password is cleared.
DVD
Set to On
playing.
using
Password
ENTER/OK. The
Vocal
then press B.
4. Press ENTER/OK to confirm your rating
then press SETUP to exit the menu.
DVD
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
and the
menu
To
(Dynamic Range Control)
possible,
the LOCK
Rating 1-8: Rating one (1) has the most restrictions
rating eight (8) is the least restrictive.
capabilities.
DRC
on
Unlock: If you select unlock, parental control is not
active and the disc plays in full.
select 48 kHz. When this choice is
this unit passes each
further processing.
"Rating"
and
DVD
Sample Freq. (Frequency)
their content.
Input a password and press ENTER/OK. Enter it
again and press ENTER/OK to verify. If you make a
mistake before pressing ENTER/OK, press CLEAR.
/
(for DTS): If you select "Off ", the DTS signal is
output through the DIGITAL AUDIO OUT jack.
not
on
rated.
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
or
MPEG): Select when connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM audio.
(for Dolby Digital
of rated DVDs based
2. To
MPEG decoder.
PCM
are
only
when
a
multi-channel karaoke DVD is
The karaoke channels
on
the disc mix into
nor-
mal stereo sound.
17
Before
Operation
DVD
-
DivX(R) VOD
DVD
Area Code
Enter the Area Code whose standards
rate the DVD video
reference
disc, based
chapter (see
Select "Area Code"
1.
part
were
used to
the list in the
We
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos
33).
page
on
on
the LOCK
menu
then press
B.
1.
2.
Follow
3.
Select the first character
4.
Press B and select the second character
2
step
as
shown left
(Rating).
using
using
the DivX
VOD service. For
more
informa-
tion, visit www.divx.com/vod.
2.
Select
"DivX(R)
VOD"
option
then press B.
Press ENTER/OK while "Select" is selected and the
registration code will appear.
Use the registration code to purchase
v / V buttons.
using
videos from DivX
v / V buttons.
or
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
Press ENTER/OK to confirm your
selection.
5.
area
code
download the video onto
3.
OTHERS
Play
and
Divx(R) settings
can
be
changed.
played
PBC
On
.
Auto
Off
Play
DivX(R)
VOD
Select
Select
Move
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
or
Off.
are
played according
are
played
to the
PBC.
Off: Video CDs with PBC
the
same
way
as
Audio CDs.
Auto
You
cally
set up the DVD+VCR
starts
If Auto
DVD
Play
can
Play
playing
so a
DVD disc automati-
whenever the DVD is inserted.
mode is set to On, this DVD
player will
longest playback time and
automatically.
search for title that has the
then
play
back the title
Note:
The Auto
18
playback
on
this
Press ENTER/OK to exit.
All the downloaded videos from DivX
OTHERS
Set
disc for
Note:
The PBC and Auto
PBC
a
unit.
Play
function may not work for
some
DVDs.
back
on
this unit.
VOD
can
only
be
Operation
Playing
You will
5.
tape
a
only
with tape
be able to load and
eject
video cassettes
when your DVD+VCR is plugged into the mains.
Your DVD+VCR may also playback recordings from
NTSC
When
To
tapes (on PAL TV).
Getting
a
better
During
picture
playback started, the
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control to
manually adjust the tracking until any distortions have
appear
If distortions
6.
on your TV.
Press POWER to turn
on your DVD+VCR.
Insert the video cassette into your DVD+VCR.
The video cassette should have the window side
up and the
Press N to start
If you load
a
arrow
facing
away from you.
your tape.
video cassette which has had its record
protection tab removed, playback
automatically.
of the cassette will
3.
automatically adjust
picture quality.
Press PAUSE/STEP
by
the
picture.
repeatedly to advance
the
tape
frame.
can be paused for up to 5 minutes. After 5
minutes your DVD+VCR will stop the tape to
prevent damaging the tape or your DVD+VCR
.
picture quality
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
While
playback.
tape is playing press CM SKIP
control to
(or
on
the remote
another programme
material).
press CM SKIP to
skip:
can
be
improved slightly by using
5 Press 150 seconds
6 Press 180 seconds
OPR
(Optimum
Press N to continue
playing
your tape.
Double
speed playback
Press "PLAY N" during normal
playback. The tape will play back
at double
speed
Response)
automatically improves playback picture
quality by adjusting your DVD+VCR to the condition
the
tape. Please
appear in
play
note that the OPR icon
that mode when
1.
Press i.
2.
Press b
3.
Press ENTER/OK.
4.
and without sound.
Press "PLAY N" to return to
Picture
This feature
vorV.
normal
commercial
skip
4 Press 120 seconds
a
Tapes
4.
playback.
3 Press 90 seconds
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
Still
reduce them
2 Press 60 seconds
the best
Press PAUSE/STEP to still
frame
picture,
1 Press 30 seconds
Your DVD+VCR will
give
CM
Repeatedly
AUTO TRACKING
tracking
in the
seen
Press STOP to end
normal
playing
start
to
be
If the end of the tape is reached, your DVD+VCR will
stop playback automatically, rewind, stop, eject the
tape.
sure
Tu rn
2.
can
Press EJECT.
that you have correctly connected your
DVD+VCR as described earlier in this book.
facing
slow motion and shuttle, the noise bars may
on the picture according to the status of
withvorV.
been removed.
Make
off the slow motion and shuttle, press the
tape.
automatic
1.
s witch
desired function.
cassette is inserted and
a
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(REV, PB 5-, PB 1-, Still, SLW, PLAY, 2PLY, CUE)
Slow motion
Press
3
or
B to select
or 4
playing
playback
at
playing
5.
a
(
)
will
only
tape.
(OPR).
repeatedly
to select:
SHARP. Please note you may
speed
a
of
OFF, SOFT
only
or
set OPR when
tape.
Press i return to
screen.
Picture search:
During playing back press either BACKWARD or
FORWARD to this will enable you to rapidly wind the
tape see where you are on the tape.
Logic search:
During fast forwarding or rewinding press and hold
m or M the picture will be played back at 7 times
normal playback speed.
Pr-12
P SET
R
ACMS
OFF
SOFT
SHARP
fOSD
ON
OFF
19
Prepa tion
Operation
with tape
Instant Timer
Your DVD+VCR allows you to make
variety of simple methods:
Instant Timer
ately
for
runs
out.
set
a
7.
Recording (ITR)
recordings using
using
Standard
LP you
Play (SP); using
will be able to record up to 360 minutes. Please note
there will be a slight loss in picture and sound quality
when
1.
Make
sure
Insert
on
your DVD+VCR.
video cassette with
a
protection
facing
up and the
Press
3 or 4
arrow
facing
tab into your
away from you.
to select the programme number you
wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
If you wish to record directly from the SCART or
RCA jacks, repeatedly press AV until the socket you
wish to record from is
AV 1 for
the
recording
displayed.
from EURO AV1 SCART
jacks
on
of your unit.
AV 2 for recording from EURO AV2 DECODER
rear
jacks
the
of your unit.
recording from VIDEO IN and AUDIO IN
on
AV 3 for
(Left
5.
&
rear
Right) jacks
on
the front of your unit.
Press LP if you wish to record in
Long Play or
Play.
SP will produce improved picture and sound quality,
however LP will provide twice as much recording
Standard
time
6.
as
SP.
Press REC/ITR
Press REC/ITR
on
on
the remote to start
recording.
the remote several times.
Each successive press will increase the record time
30 minutes until you reach a maximum of 9
by
hours.
on a tape (this can hapby accident!) remove the protection
edge of the video cassette.
possible to record on a video cassette
protection tab removed by covering
with self adhesive
The video cassette should have the window side
4.
If you do not wish to record
record
DVD+VCR.
3.
Notes:
pen quite easily
tab on the back
that you have correctly connected your
as described earlier in this book.
Press POWER to turn
recording.
Press EJECT.
It is
DVD+VCR
2.
Press STOP to end
LP.
using
recording.
paused for up to 5 minutes; RECP will
when a tape is paused. After 5 minutes
your DVD+VCR will stop recording to prevent
damaging the tape or your DVD+VCR.
8.
which
enables you to record up to twice the amount of time on
a video cassette. For example an E-180 will record up
to 180 minutes
unwanted
be
Tapes
be displayed
can
incorporates Long Play (LP)
recording
Press PAUSE/STEP to continue
a
Recording (ITR) start recording immediperiod of time or until the video cassette
Your DVD+VCR
Press PAUSE/STEP to avoid
scenes.
with the
the hole
tape.
Remember you can record one programme while
another by starting your instant recording,
watching
press TV/VCR to select TV mode and then
a different channel on your TV.
selecting
Operation
with tape
recording using On Screen
Display
Timer
PR
DATE
TIME
PR-03
You may set up to seven timer record events
within one month of the current date.
::
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
SUMOTUWETHFRSA
--
--
::
--
--
--
~
--
Note:
Before
sure that you have set the
correctly and you know which stations
you have tuned TV stations on your DVD+VCR.
setting
the timer make
6.
1.
Insert
a
video cassette with
protection
Use v/V/1/2 buttons to enter the
tab into your
PR
facing
2.
away from you.
facing
DATE
TIME
41 4 ::
00 1 5
PR-03
The video cassette should have the window side
arrow
start and
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
DVD+VCR.
up and the
recording
end times of the programme that you wish to record.
DVD+VCR clock
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
--
::
--
-~
--
::
--
-~
--
::
--
-~
--
::
--
-~
--
::
--
-~
--
SP
SP
SP
SP
SP
SP
Press i.
Press1or2toselectREC(
).
Press ENTER/OK.
7.
Press B and press v
or
V to switch VPS/PDC
on or
off.
PR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
--
--
Press ENTER/OK to start
--
SP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
,
setting
8.
Use the PR/TRK
(v/V)
to enter the station that you
wish to record then press 2.
PR
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
Press v
IP,
or
or
SP
--
SP
--
SP
--
or
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
SP
SP
SP
SP
SP
SP
recording speed.
tape is left and
SP
--
entering the date
following automated
2 to select, then press ENTER/OK to
confirm.
DLY To record every day (except
at the same time.
Saturday
and
Sunday)
same
tape speed (SP,
LP).
SP
--
to enter the date of the
SU~SATo record at the
-~
SP
SP
--
programme.
If you press ENTER/OK before
Press 1
--
--
when VPS/PDC is ON.
SP
--
full press v or V to select
the event that you wish to remove and replace.
Press b to delete the event.
you may select one of the
recording features.
::
--
speed from SP to LP, if necessary,
plete recording the program. IP mode is not
are
(v/V)
-~
IP mode determines how much
Note:
Use the PR/TRK
-~
V to select the desired
PR-03
5.
--
ON
:
Press B to select the
PR
If all timer record events
--
::
switches
TIME
--
::
the timer record
event.
4.
~
--
VPS/PDC
3.
TIME
41 4 ::
00 1 5 30
--
SP
--
DATE
PR-03
SP
SP
--
DELETE:
PR
SP
--
time every week.
DATE
TIME
41 4 ::
00 1 5 30
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
to
com-
selected
Operation
Operation
with tape
recording using On Screen
Display (Continued)
Timer
9.
Press i to set another timer record event and follow
steps
3 to 8.
Check that the timer event details
Press i return to
are
correct.
screen.
If PLEASE CHECK is
displayed, you have entered
and will need to re-enter the data.
incorrectly
10. Press POWER to switch your DVD+VCR to Timer
Standby mode.
mode for the timer
The timer
standby
recording.
During
timer
automatically
Programme System (VPS)
Programme System (VPS) ensures that
the TV programmes that you have programmed for
timer recording will be recorded exactly from their
beginning to end, even if the actual broadcasting time
differs from the scheduled time due to delayed start,
or if the programme is extended beyond its scheduled
time. Also, if a programme is interrupted, for example, if
a news flash is inserted, the recording will also be
interrupted automatically and resumed when the
The Video
power off when
recording standby mode, the DVD
operated. To use the
and
VCR mode cannot be
DVD+VCR, press POWER. After you use the DVD or
VCR, press POWER again to put the VCR into timer
mode.
If at
a later date you wish to delete or change any of
settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Use v
the
or
V to select the event that you wish to delete
or
change.
Press b to delete the event...or
Press ENTER/OK to
change;
then press b
or
B to
select; Station, Date, Start and End times and
recording speed.
Press v
or
V to enter the correct
information.
If Timer record events
Make
sure
Overlap...
that the
events do not
preset times of the timer recording
overlap. If they do, the earlier pro-
gramme will
always
Example:
Programme
1 is
be
given priority.
programmed
to start at 16:00 and
programmed
to start at 16:30 and
end at 17:00.
Programme
end
2 is
The similar
by
the TV station and this
system PDC, which is used in the time
being in the Netherlands,
new video recorder.
ends.
recording standby
recording,
recordings from TV
broadcasting these signals. It should be set
OFF for all timer recordings from TV stations that are
not broadcasting these signals.
Notes:
Recording
timer
Video
***
Timer
a
stations
recording.
The DVD+VCR will
performing
VPS should be set ON for all timer
will appear in the display
window while your DVD+VCR waits to make the
)
11. Press POWER to end timer
DVD while
controls the timer in the video recorder.
recording.
symbol (
w atch a
press DVD to select DVD mode.
programme continues.
The VPS signal is broadcast
Note:
The 1W Mode is not available in the
To
at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
will be recorded.)
2
can
also be used with your
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record
In addition it has
a
-
VCR part
Tape Counter Memory Stop
System
and
playback Hi-Fi stereo sound.
digital stereo sound
to record and playback the
stereo NICAM
decoder. This allows you
sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
The
Digital Tape
play
window instead of the time
displayed on the disby pressing CLK/CNT
on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape.
1.
Counter
be
can
Press CLK/CNT.
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
Press CLEAR to set the counter to 0:00:00.
audio
The
1.
system, video disc
Press N
another Hi-Fi VCR.
or
Your VCR's NICAM
digital sound decoder allows you
broadcasts with NICAM sound, as well as
standard stereo, bilingual and mono sound. The
to
or
start
recording.
tape counter will display the actual play time in
hours, minutes and seconds.
enjoy
2.
Press x when
playback
or
recording
is
complete.
Press m.
particular type of sound received or that recorded
briefly displayed on the TV screen for a
couple of seconds:
The
will be
tape will rewind and automatically stop when
the counter returns to 0:00:00.
STEREO NICAM
Sound is
and
automatically
mono
recorded
tracks of the video
the Hi-Fi stereo
on
To set the decoder
tape.
BIL NICAM
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
2.
3.
track of the video
Press AUDIO
the Hi-Fi tracks and the
on
tape without any separation.
repeatedly
until the desired audio mode
We have
already described, how to connect a decoder
pay-TV station as CANAL+ or PREMIERE on page
9. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
for
1.
will appear
Press F
The choice is STEREO, LEFT, RIGHT and MONO.
In BIL NICAM playback the primary language is out-
Press ENTER/OK.
Please note that
setting is MONO.
when adjusting the tracking
2.
On Screen
Display (F.OSD)
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your DVD+VCR on the TV screen. If a recording is
taking place these On Screen Displays will not be
recorded onto the
tape.
Press CLK/CNT to
Press CLK/CNT
display options.
display.
repeatedly
The
to
cycle through
the
counter and amount of
tape
tape left will appear if there is
a
tape loaded.
After 3 seconds the
Displays
will clear
majority of the On Screen
leaving only the clock or tape
counter and the amount of
Press CLK/CNT
the TV
screen.
again
to
tape left
remove
on
all
the
screen.
displays
from
or
or
on
the TV
screen.
G to select the DECODER.
E to select.
When the decoder is connected to the AV2
socket.
OFF: When another VCR is connected to the AV2
socket.
3.
control Hi-Fi stereo sound may revert to MONO.
Press D
ON:
nels when the audio
2.
menu
appears.
put on the left channel and the secondary channel is
output simultaneously from the right channel when
audio output is set to STEREO.
The primary language will be output from both chan-
1.
Press i.
The main
Press i to return to
a
TV
picture.
Operation
Additional
Operation
Video Doctor
-
VCR part
(Self-Diagnosis)
This feature informs you that there is a problem with
your DVD+VCR. These error messages will appear on
the TV screen.
1.
Compatibility
Your DVD+VCR
record and
or 2
to select
can
format programme
signal
successfully
a
the correct
must be broadcast
by
16:9
back wide
play
aspect ratio programmes (16:9). To record
screen
Press i.
Press 1
Wide Screen
screen
wide
type
screen
of wide
the TV station.
.
1.
Press ENTER/OK.
Switch
on
your DVD+VCR.
Press i.
PressForGtoselect
ANTENNA CONNECT
HEAD STATUS
.
Press ENTER/OK.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
Pr-12
P
R SET
ACMS
SET
SYS
fOSD
ON
OFF
2.
Press
3 or 4
to check
a
Pr-12
problem.
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the
P
SET
R
jack securely.
2.
HEAD STATUS
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in
Lock
switched off
1.
on
3.
only
enjoy
be
can
be
normal.
Normal format
operated
If any buttons on the front of your unit are
SAFE will flicker in the display window for
pressed
a
few
seconds.
to switch off the child lock.
window.
the
menus
from the TV
playback you
using a SCART
(Power
Wide-Screen
screen.
must connect
cable.
Mode)
save
place your DVD+VCR into
economic power save mode.
Nothing is displayed in the display window.
an
Press i.
Press F
menu
or
will appear
on
the TV
screen.
G to select the 1W ON/OFF.
Press ENTER/OK.
work.
display
as
Set 1W ON/OFF to ON to
The main
again
remove
Wide-Screen
your VCR to the TV
screen.
1
OFF will appear in the
recording
playing back and recording
recordings (16:9).
1W Mode
can
and
for
Press i to
To
recording.
from the TV
Press LOCK.
Press LOCK
Wide-Screen and Normal programmes
format
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
2.
repeatedly to
AUTO, 4:3 or 16:9.
AUTO (Playback mode only)
Automatically plays back Wide-Screen programmes
Only
recording.
the front of the unit
that your unit
the remote control.
so
S
Press v/V
Only for playing back
recordings (4:3).
place
(Child Lock)
The control buttons
using
menus
ON
OFF
16:9:
NEXT TIMER PROGRAMME
PR-01 26 10:00~11:00SP
Shows the current status of timer
the
ON
OFF
as
O
remove
fOSD
4:3
NO. OF TIMER PROGRAMME
O2
Shows the number of timer
Press i to
P
SET
R
SYS
SET
select:
O
3.
Pr-12
ACMS
fOSD
2.
Press D
3
Press i.
or
E to select the ON.
Notes:
Some function may not be
?
operated
in the 1W Mode.
The 1W Mode is not available in the
standby mode for
recording and when turn Power off of the
DVD+VCR after receiving the encoded television signals (CANAL+ or PREMIERE).
the timer
?
The encoded television
MIERE)
are
signals (CANAL+
or
not decoded in the 1W Mode.
PRE-
Additional
from External
Recording
You
record from
can
camcorder
external
1.
Operation
or
VCR part
Components
component, such
as a
to any of the DVD+VCR's
inputs.
Make
sure
that the
from is connected
2.
external
an
VCR, connected
-
Press AV
component you
properly
repeatedly
want to record
to the DVD+VCR.
to select the external
Copying
You
recording
the
of your unit.
recording from EURO AV2 DECODER
(Left
3.
Load
4.
Set
5.
on
&
the
from EURO AV1 SCART
recordable
on
to
jacks
4.
tape
or
Press REC/ITR
Press STOP to
or
LP)
as
necessary
by
component.
on
the Remote Control
once
5.
lights
in the
display
confirm the
?
If your source is copy-protected using CopyGuard,
you will not be able to record it using this unit. See
Copyright on page 5 for more details.
a
fixed
Recording.
length
recording
start
recording,
position.
record for
on
point
from
the Remote Control.
manually
to
begin
of time,
see
Instant
When the DVD is finished
playing,
press STOP to
copying.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc.
It is not permitted to copy Macrovision encoded
DVDs (or Discs). "LOCK" is displayed in the display
window.
?Y
ou must stop the copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.
?
When you stop the DVD
the recording on VCR is
Notes:
o
want to
Notes:
?
window.
stop recording.
Before
Press REC/ITR
end
to start
?
Timer
place on the DVD from which you
dubbing using the N, BACKWARD,
you may need to press N
tape.
disc in the external
The REC indicator
?T
tape into the VCR deck.
The DVD goes into PLAY mode and the VCR goes
into RECORD mode. If the DVD disc menu appears,
recording.
7.
blank VHS video
For best results, pause playback at the
which you want to record.
on
If you have a TV attached to your DVD+VCR, you
can see the video playing.
6.
tape.
copying.
recording mode (SP
pressing LP repeatedly.
the
a
Find the
start
the front of your unit.
a
Play
VHS
Insert
rear
Right) jacks
a
a
2.
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
jacks
DVD to
FORWARD and PAUSE functions.
AV 1 for
rear
a
Insert the disc you wish to copy into the DVD deck
and close the disc tray.
record from.
AV 2 for
copy the contents of
1.
3.
input
can
from DVD to VCR
playback during copying,
stopped automatically.
Operation
General
Playback
Buttons
Z
X
(OPEN
features
DVD Part
-
Operations
/
CLOSE)
(PAUSE)
Opens
closes the disc
or
repeatedly
or
to
playback.
play Frame-by-Frame.
press .
During playback,
ter/track
tray.
press X to pause
During playback,
Press X
./>
Discs
to return to the
or
> to go to the next
of the current
chap-
beginning
chapter/track.
Press . twice
briefly
to
step back
to the
previous
chapter/track.
m/M
During playback, press
required scan speed.
DV D, DivX disc; 4
m
or
M
repeatedly
to select the
steps
Video CD, MP3, WMA, Audio CD ; 3
steps
While the
M
playback is paused, press
(4 steps, forward only).
repeatedly
to
in
play
slow motion
REPEAT
press REPEAT
During playback,
desired
repeatedly
to select
a
repeat mode.
DVD Video discs:
Chapter/Title/Off
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
A-B
During playback, each press of A-B button to select point A
point B and repeats a sequence from point A (Starting
point) to point B (End point). Press CLEAR to exit.
and
ZOOM
During playback or pause mode, press ZOOM to enlarge the
image (4 steps).
You can move through the zoomed picture using bBvV
video
buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback
playback.
(ANGLE)
in
stop mode, press RANDOM for random
If the current DVD title has
the
DISC MENU
or
screen.
The disc
a
menu, the title
Otherwise, the disc
menu
appears
on
the
menu
menu
appears
on
may appears.
screen.
During playback of DVD disc contains scenes recorded differcamera angles, press ANGLE repeatedly to select a
desired angle.
ent
(SUBTITLE)
During playback, press SUBTITLE repeatedly
language.
to select
a
desired subtitle
(AUDIO)
During playback, press AUDIO repeatedly
language or audio track.
audio
to hear
a
different
Playing
Notes
?
a
DVD
general
on
Video CD
or
features:
Marker Search
OnaVideoCDwithPBC,youmustsetPBCtoOffon
setup menu to use the repeat function (See "PBC"
on page 18).
the
If you press > once during Repeat Chapter
the repeat playback cancels.
?
(Track)
playback,
You
Marker
a
playback from up to nine memorized
points. To enter a marker, press MARKER at the desired
point on the disc. The Marker icon appears on the TV
screen briefly. Repeat to enter up to nine
can
start
?
Zoom may not work
?
When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
To Recall
or
will blink
1.
During
disc
search
menu
the TV
on
different
angles
possible.
is
?
The A-B
current
repeat
on some
screen
as an
DVDs.
To enter
during
markers.
recorded at
scenes
indication that
angle switching
2.
function is available
only
in the
chapter/track.
You
can play any marker
the marker search menu.
five+
This
speakers (instead of the
speakers normally required for multi-channel audio
a home theater system).
player
remove
player.
Press DISPLAY
or
the
during playback.
by inputting
its number
option
will be
option.
highlighted.
scene
from the last disc that
remains in memory even if
the disc from the player or switch off the
scene
If you load a disc that has the
is automatically recalled.
scene
memorized,
scene
This
Use1or2totoselect"3DSUR".
To turn off the 3D Surround effect, select "Normal".
player
does not memorize the
you switch off the
disc.
player
before
scene
of
commencing
a
disc if
to
play
Screen Saver
1.
2.
Press AUDIO
The
during playback.
on
To return to normal
playback, press AUDIO repeatdisappears from the menu
until "3D SUR."
the
menu screen.
screen.
Time Search
To start
playing
at any chosen time
on
the disc:
1.
Press DISPLAY
2.
Press v / V to select the time clock icon and
during playback.
"--:--:--" appears.
3.
Use numerical buttons to
input
the
required
start
time in hours, minutes, and seconds from left to
right. If you enter the wrong numbers, press CLEAR
to
remove
the numbers you entered. Then
input
the
correct numbers.
4.
Press ENTER to confirm.
selected time.
Playback
starts from the
appears when you leave the DVD
mode for about five minutes.
screen saver
player
"3D SUR." appears
edly
on
Note:
4 to select the sound
The sound
3.
starts from the marked
Memory
memorizes last
is viewed. The last
you
Use 3
marker
3D surround effect that simulates multi-
a
Last Scene
2.
playback
a
Or, Press CLEAR and the marker number is
channel audio from two stereo
1.
press SEARCH. The marker
appears on the screen.
playback,
erased from the list.
4.
3D Surround
from
Marked Scene
Press ENTER and
3.
Additional features
produce
a
Within 10 seconds, press b / B to select
number that you want to recall or clear.
scene.
To
Clear
in
Stop
the
Operation
Playing
This unit
can
Audio CD
an
Audio CDs
play
MP3/WMA file
or
MP3/WMA files record-
or
ed media.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
Audio CD, a menu appears on the TV screen.
Press v / V to select
ENTER and
playback
a
track/file then press PLAY
can use variable
starts. You
or
or
0:00:00
1/12
List
1-Music1
Track3
2-Music2
Track4
3-Music3
Track5
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Track8
DISPLAY
3.
Clear All
Info
When
PROGRAM Edit
4.
playing
file
a
track titles, you
DISPLAY.
information such
containing
can see
the information
[ Song, Artist, Album, Comment,
Genre
as
by pressing
On
move
6.
to the next page.
limited
?
as
top of the
on
MP3 / WMA disc
menu
is
player
is
?
?
48 kHz
within
Sampling frequency:
(MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32 384 kbps (WMA)
The player cannot read an MP3/WMA file that has a
file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates
track
a
on
the "List", then press ENTER to
Select the track you want to start
"Program" list.
Press PLAY
or
ENTER to start.
playing
on
the
Playback begins
in
To
resume
list have
played
normal
playback
track
a
Repeat Programmed
on
?
Track:
?
All:
?
Off(No display):
once.
from
programmed play-
the list and then press PLAY.
Tracks
a
desired
repeat mode.
the current track
repeats
repeats all the tracks
does not
the "Program"
play repeatedly.
list.
on
-
-
If you press > once during
the repeat playback cancels.
Repeat
Track
playback,
-
an
?
program edit mode,
Note:
follows:
-
?
appears.
mark will appear.
E
again to exit the
disappear.
Press REPEAT to select
highlighted.
with this
compatibility
within 8
32
Select
back, select
a
PHOTO word
?
5.
]
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
?
menu
mark will
E
"Program"
Press DISC MENU to
MP3/WMA files recorded
MUSIC
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
Tips:
?
or
or
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
ID3 TAG
?
Audio CD
an
Press PROGRAM. The
then the
7-Music7
PROGRAM Edit
Insert
media. AUDIO CD
Press PROGRAM
Program
Track1
Track2
1.
contain 30 tracks.
can
Note:
1/12
List
Program
A program
2.
MUSIC
0:52:07
The program function enables you to store your favorite
tracks from any disc in the player memory.
play-
back functions. Refer to page 26-27.
AUDIO CD
Programmed Playback
ISO 9660 file
File
names
maximum of 8 letters and
a
.mp3 or .wma extension.
contain special letters such as
must
incorporate
?
They
should not
?
The total number of files in
2.
a
a
3.
"Program"
List
During
STOP mode, press PROGRAM and
the
mark will appear
E
Use vVbBto select the track that you wish to
from the Program list.
Press CLEAR.
tracks
1.
/ ?
folder should be less
Track from
erase
an
*:"<>letc.
than 1190 files.
1.
2.
on
the
Erasing
system.
should have
Erasing
Repeat step
1~3to
erase
additional
the list.
Complete Program
List
During
STOP mode, press PROGRAM and
the
mark will appear
E
Use vVbBto select "Clear All", then press
ENTER.
Note:
The programs are also cleared when the power is off
the disc is removed.
28
or
Viewing
This unit
1.
can
JPEG file
a
JPEG files recorded media.
play
Insert
a
menu
appears
Moving
JPEG files recorded media. The PHOTO
on
the TV
to another File
Press .
ing
screen.
PHOTO
a
or
picture
>
or cursor
(b
or
B)
to advance to the next
once
or
while view-
previous
file.
Zoom
List
Preview
During watching pictures, press ZOOM to enlarge the
image (4 steps).
You can move through the zoomed picture using bBv
Folder 00
video
Folder 01
>>>
Folder 02
Folder 03
Folder 04
V buttons.
01 FILE 01
02 FILE 02
To rotate
03 FILE 03
/FILE 01
picture
Press v / V
during showing
ture clockwise
2.
Press v / V to select
a
or
a
picture
to rotate the
pic-
counter clockwise.
folder, and press ENTER.
A list of files in the folder appears.
3.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
JPEG disc
or
PLAY.
as
?
4.
To return to the PHOTO
menu
while
watching pic-
are
in
file list and want to return to the
a
Folder list,
press ENTER.
ous
?
use
is limited
player
Depending
upon the size and number of JPEG
a long time for this unit to read
the disc's contents. If you do not see an on-screen
display after several minutes, some of the files may
Tips:
If you
with this
files, it could take
tures, press STOP.
?
compatibility
follows:
v / V buttons to
Press DISC MENU to
move
be too
previ-
---
reduce the resolution of the JPEG
files to less than 5 million
and
highlight
large
pixels
and burn another
disc.
?
to the next page.
The total number of files in
a
folder should be less
than 1190 files.
?
There
>>
?
are
three Slide
(Normal)
and
Speed options
(Slow).
Use vVbBto
highlight
select the
you want to
option
.
Then,
use
: >>>
use
(Fast),
?
b / B to
then press ENTER.
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
?
While
help
top of the
on
watching
a
picture,
menu
is
?
menu.
?
a
different
Ensure that all the selected files have the
If the files have
rename
highlighted.
press RETURN to hide the
Some discs may be incompatible due to
recording format or the condition of disc.
extensions when
On
PHOTO word
?
>
File
them
names
to be read
shown
as
copying
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
by
into the CD
".jpg"
extension will not be able
this unit. Even
JPEG
image
though
the files
files in Windows
are
Explorer.
Slide Show
Use vVbBto
press ENTER.
highlight
the
(Slide Show)
then
Still Picture
1.
Press PAUSE/STEP
The
2.
player
will
now
during
slide show.
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
or
press
29
Operation
Playing
Using
1.
this DVD
Insert
DivX Movie file
a
Player
you
can
play
DivX file.
DivX disc
DivX file recorded media. The MOVIE
a
appears
the TV
on
menu
compatibility
as
follows:
?A
v ailable
with this
player
is limited
screen.
MOVIE
720x576
0:00:00
resolution size of the DivX file is under
(W
x
H) pixel.
List
?
Movie Folder 1
The file
name
of the DivX subtitle is available
Movie Folder 2
by
56 characters.
Movie Folder 3
Movie Folder 4
Movie Folder 5
?
Movie Folder 6
Movie Folder 7
If there is
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
Movie Folder 8
"
"
_
display.
2.
Press v / V to select
a
folder, and press ENTER.
?
A list of files in the folder appears.
3.
If you want to view a particular file, press v / V to
a file and press ENTER or PLAY.
You can use variable playback functions. Refer to
highlight
Press STOP to
stop the playback. The Movie
is not interleaved,
putted.
?
menu
If you are in a file list and want to return to the previFolder list, use the v / V buttons on the remote to
?
On
move
CD with MP3/WMA, JPEG and MOVIE file, you
switch MUSIC, PHOTO and MOVIE menu. Press
TITLE and MUSIC, PHOTO and MOVIE word on top
of the
?
menu
is
highlighted.
picture may not displayed properly while DivX
playback. Set your TV system to AUTO or PAL-60
mode to restore the picture, if available.
?
The disc subtitle may not be displayed properly, if
DivX subtitle is downloaded through the internet.
?
If the Disc Subtitle
DivX subtitle
title may not
Notice for
setup
menu
displaying
If the subtitle does not
a
does not have the
language you are going
be displayed properly.
to
play,
Playable
the sub-
the DivX subtitle
display properly during playback,
press and hold SUBTITLE about 3 seconds then press
b / B to select another language code until the subtitle
is displayed properly.
called
1-point, 2-point,
or
encoding,
3-point GMC.
DivX file
Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
Playable
Codec format
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
"Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
Not all the WMA Audio format is compatible with
?
-
-
?
-
-
?
this unit.
30
audio is out-
.avi, .mpg, .mpeg
Playable
The
different levels of GMC
are
usually
a
or
GMC?
There
to the next page.
can
either video
MPEG4 standard. Some MPEG4 encoders, like
DivX or Xvid, have this option.
and press ENTER.
Press DISC MENU to
30
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
ous
highlight
over
operate
If the file is recorded with GMC, the unit supports only 1-point of the record level.
*
Tips:
?
not
?I f the video and audio structure of recorded file
appears
?
frame is
screen
second, this unit may
normally.
page 26-27.
4.
If the number of the
per 1
Playing
This unit will
a
play
DVD VR format Disc
DVD-R/RW discs recorded
DVD-Video format that have been finalized
using the
using a
DVD-recorder.
?
This unit will
Video
1.
play DVD-RW discs
Recording (VR) format.
Insert
a
disc and close the
recorded
tray, It
start
the
using
playing
automatically.
2.
The DVD-VR
menu appears on the TV screen when
you press DISC MENU buttons while playing.
DVD-VR
3.
Press v / V to select
ENTER and
4.
a
playback
Press DISC MENU to
track then press PLAY
or
starts.
move
to the list
menu.
Note:
?
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
Some DVD-VR disc
DVD RECORDER.
are
made with CPRM data
Player
does not
by
support these
kinds of discs.
What is 'CPRM'?
CPRM is a copy protection system (with scramble
system) only allowing the recording of 'copy once'
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
This
player
is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but
cannot
then make a copy of those recordings.
you
CPRM recordings can only be made on DVD-RW
you
can
discs formatted in VR mode, and CPRM recordings
can only be played on players that are specifically
compatible
with CPRM.
Operation
Additional
Controlling
Operation
other TVs with the
Maintenance and Service
remote control
Refer to the information in this
You
can
control the sound level,
input source,
supplied
power switch of your LG TV with the
control.
You
can
control the sound level,
input
and
remote
source, and
power switch of non-LG TVs as well.
If your TV is listed in the table below, set the
appropri-
ate manufacturer code.
1.
While
holding down TV POWER button, press the
number buttons to select the manufacturer code for
your TV
the table
(see
below).
contacting
When
save
at the
more
them
Do not
packing
?
use
volatile
liquids
such
insecticide spray
Do not leave rubber
or plastic products in contact
long period of time. since they
a
a
leave marks
the surface.
code number is listed, try entering
time until you find the one that works with
as
the unit.
with the unit for
at
carton and
the exterior surfaces clean
Keeping
one
than
one
original shipping
factory.
near
If
the
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
Release TV POWER button.
Code numbers of controllable TVs
before
the unit
shipping
Please
chapter
service technician.
the Unit
Handling
?
2.
a
on
your TV.
Cleaning
Manufacturer
Code Number
LG / GoldStar
1
(Default),
the unit
To clean the
player, use a soft, dry cloth. If the surfaces
extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution.
2
are
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Do not
use
Hitachi
4
thinner,
as
Note:
?
Maintaining
your TV,
Depending
on
function
the TV,
on
all buttons may not
after entering the correct
?
even
If you enter a new code number, the code number
previously entered will be erased.
When you replace the batteries of the remote, the
code number you have set may be reset to the default
setting.
Set the
might damage
as
alcohol, benzine,
the Unit
appropriate
code number
again.
The DVD+VCR is
a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For details,
please
service center.
or
the surface of the unit.
some or
manufacturer code.
?
strong solvents such
these
use.
contact your nearest authorized
Language
and Area Code List
Language Code
Use this list to
input
List
your desired
language
for the
following
initial
settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
Guarani
7178
Moldavian
7779
Tagalog
Tajik
8476
6590
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Tu r kish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Tu r kmen
8475
Cambodian
7577
Italian
7384
Por tuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Code List
Choose
a area
Area
code from this list.
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
Ukraine
UA
JP
Paraguay
Philippines
PY
CZ
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Po r tugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
TR
Refrnce
Troubleshooting
Check the
following guide
for the
possible
cause
Symptom
of
a
before
problem
service.
contacting
Cause
Correction
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
No disc is inserted.
Insert
a
cord into the wall outlet
disc.
not work.
No
picture.
The TV is not set to receive this unit's
Select the
signal output.
on
appropriate video input mode
the picture from the this
the TV
so
unit appears
No sound.
Connect the video cable into the
securely.
The Progressive Scan is set to "On" on
the setup menu but is connected to a
standard (analog) television.
Set
The
Select the correct
equipment
connected with the
The audio cables
are
not connected
(see
Progressive
page 16).
audio receiver
The power of the equipment connected
with the audio cable is turned off.
Tu rn
on
the
Set the Audio
option
tion, then
on
The disc is
Clean the disc.
The DVD
not start
player does
playback.
dirty.
The TV channels
An
unplayable
are
not tuned in
properly.
Check
Insert
disc is inserted.
jacks
connected with
equipment
position.
is set to the wrong
mode of the
input
so
the audio cable.
turn
by pressing
poor.
Scan to "Off"
Connect the audio cable into the
securely.
option
jacks
you can listen to the
sound from the this unit.
securely.
The Audio
is
screen.
securely.
signal output.
picture
the TV
The video cable is not connected
audio cable is not set to receive DVD
The
on
posiplayer again
POWER.
tuning,
a
to the correct
the DVD
carry out
playable
disc.
tuning again.
the disc
(Check
type and Regional code.)
The disc is
placed upside
Place the disc with the
down.
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
dirty.
The
level is set.
Cancel the
the
The remote control
There is
does not work
remote control and this unit.
properly.
an
the disc
tray correctly
Clean the disc.
The disc is
Rating
on
guide.
obstacle in the
path
of the
The batteries in the remote control
are
Rating
function
or
change
level.
rating
Remove the obstacle.
Replace
the batteries with
new ones.
exhausted.
Video
tape
cannot be
Is the cassette
compartment empty?
Eject
the
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO"
"AUDIO"
No NICAM sound
recording
34
NICAM mode is not set
properly.
Make
on
sure
by repeatedly pressing
the remote control.
NICAM in the
menu
is set to
AUTO for the station to be recorded.
Specification
General
Power
requirements
AC 200-240V, 50/60 Hz
Power
consumption
17W
Dimensions
Mass
(approx.)
430x78.5x265mm(WxHxD)
4.2
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
(41˚F
to
95˚F)
Refrnce
display type
System
Laser
Semiconductor laser,
Video Head
wavelength
Double azimuth 6 heads, helical
system
650
scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75
Vp-p,
(SCART)
(RCA)
ohms, unbalanced (SCART/RCA)
Outputs (DVD)
VIDEO OUT
1
(Progressive Scan)
Vp-p 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
RGB
0.7
COMPONENT VIDEO OUT
output
Vp-p,
x
1
75 ohms
Audio
output (coaxial audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (analog audio)
2.0 Vrms
(1 KHz,
0
dB),
600 Ω, RCA
jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than 1 kohms (SCART)
Video
1.0Vp-p,
RGB
0.7
output
Design
and
specifications
are
subject
to
Vp-p,
change
75
ohms, unbalanced (SCART)
75 ohms
without notice.
P/NO: 3834RV0045T
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement