LG BC999NY Owner's manual

LG BC999NY Owner's manual
NICAM/Hi-Fi STEREO
Video Cassette Recorder
OWNER'S MANUAL
MODEL: BC999NY/BC984NY
R
PAL
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Position your VCR so that no
sunlight falls directly onto it.
Precaution&fs
Informatin
bright light
Just to
or
name a
extraordinary
few
examples
of the
features:
Care should be taken not to expose your
VCR to any unnecessary vibration,
moisture, dust or heat.
?
electrical storms it is advisable to
During
the aerial cable and mains
damage
Do not
plug
unplug
both
?
prevent accidental
to
operate your VCR if it is damaged.
repaired by
anyone
?
except qualified service personnel.
Never
remove
the back
of your VCR as this can
voltage and other hazards. If
cover
expose you to very high
your VCR does not operate properly, please check
the Troubleshooting Check List (see p.35). If your
VCR still does not
operate properly, unplug it and call
?
?
?
placed
in
a
position
to
allow
NTSC
?
on
Logic
& Picture Search
?
Child Lock
ACMS
?
Auto Head Cleaner
Channel
?
Auto Power
7 event/1 month
?
(Automatic
Memory
System)
on
and
Play
timer
Fine still, Frame
advance & Fixed Slow
Built-in ShowView
functions
Real Time Counter
programming
?
VPS/PDC function
?Quick Start function
(BC999NY)
Recording and
playback for 16:9
?Auto
-
?
Energy Saving
function
Tracking System
Digital Stereo decoder
for reception of NICAM
Stereo, Bilingual &
Mono sound
-
Shuttle Controls
PAL
TV
Wide-screen format
?
Display)
playback
?
Long Play
recording & playback
2
?
Screen
(On
Frequency synthesised
?LP
This product is manufactured to comply
with the radio interference requirements
of EEC DIRECTIVE 89/336/EEC,
93/68/EEC and 73/23/EEC.
ICON OSD
tuner
programmable
?
your dealer.
Ensure that your VCR is
a free flow of air.
?
channel memory with
to your VCR and TV.
Your VCR should not be
(easy) operations
(see p.32)
Programmable 80
ez
?
Hi-Fi Audio
?
Simulcast
System
Recording
Welcome to LG
Thank you for
buying
this LG video cassette recorder Model BC999NY/BC984NY.
2-5
Description
Advanced
2
Remote Control Location & functions
4
?
ShowView
Your VCR's Controls
5
?
Timer
Connections to
a
TV
6
Connections to your Hi-Fi & Camcorder
Tuning
in
How to
Using
Tuning
in TV Stations
Tuning
in TV Stations
Basic
menu
Automatically
Manually
TV Stations
a
-
9
10
Energy Saving
28
On Screen
28
11
12-13
14
Tape
Recording
Display
Counter
Memory Stop
Child Lock
Wide Screen
Memory
29
29
Compatibility (16:9)
Shut-Off
Video Doctor
15
16-23
TableofCnts
24-25
On Screen
31
(Self-Diagnosis)
(easy) operations
Hi-Fi Stereo Sound
30
System
31
32
33
16-17
tape
Playback
features
TV programmes
To set the Colour
Setting
8
Programming
Recording Using
26-27
ez
Operations
Playback
Other
the main
the order of TV Stations
Changing
Deleting
video channel On your TV
7
24-27
Recording
Display
6-15
Setting Up
a
Timer
24-33
Operations
Precaution & Features information
the Clock
System
Manually
18-19
Helpful
Hints
20-21
Tape Copying
22
Specifications
23
Troubleshooting
34-35
34
34
Check List
35
3
Your video recorder (VCR) is designed so that almost all of its features can be controlled from the
REMOTE CONTROL HANDSET. Some features can also be controlled from the FRONT PANEL
of the video recorder. The maximum operating distance that you may control your video recorder
is about 7.5 metres (25 feet). It must also be within an angle of 30 degrees either side of the
REMOTE SENSOR on the front of your video recorder.
RemotCnrl Locatin&fus
To avoid
batteries
possible battery leakage, remove the batteries if you do not plan to use the remote
period of time. Do not use batteries of differing age or type. Always discard
extended
safely.
Reset
tape
POWER
on or off
Switches to
a
p.
P/STILL
still picture
Rewinds the
OK
i
FF
PLAY
tape.
STOP
REC/
ITR
Starts instant recording
(see p. 20 to 21)
Programme
123
456
789
0
TV/VCR
LP
SHOWVIEW
to
monitor, view playback
correctly
positioned.
Replace the cover.
To
AA
display
SHOWVIEW
the programme menu for
ShowView programming
(see p. 24 to 25)
ez
4
POWER OFF
(see
p.
32)
AV
C.LOCK
ez
POWER OFF
on screen menu
FF
Winds the tape forwards
Forward high speed picture
PLAY
To play the
tape
STOP
To stop the
tape
ez
REPEAT
play
CM SKIP
To fast forward picture search
through 30 seconds of a
recording (see
VIDEO Plus+
or
view the VCR's tuner
TV; to watch TV or view another
programme while recording
another programme (see p. 21)
are
CM SKIP
screen.
TV/VCR
VCR;
iDisplays
P/STILL
REW
high speed picture play.
Numbered buttons
To select channels.
number information on
CURSORS
To adjust tracking.
To control on screen display
information, channel up & down
selection and vertical tremble
during picture still.
CLK/CNT
REC/ITR
2. Put the two batteries
into the compartment
making sure the + and
AA
CLEAR
display.
28 to 29)
REW
1. To insert them, push
the tab backwards and
lift off the cover of the
handset.
Ejects tape
POWER
on screen
(see
Reverse
EJECT
EJECT
CLEAR
counter to zero
OK/CLK/CNT
Calls the
Your REMOTE CONTROL
HANDSET is powered by
two AA type batteries.
3.
from
an
To switch the VCR
To install batteries:
--
damage
control handset for
p.
17)
AUDIO/VIDEO MODE
Select input source for
LP
To select the
the tape
recording
recording speed
CHILD LOCK
Switches the Child Lock
off (see p. 29)
ez
REPEAT
(see
p.
32)
on
of
and
Each button
on
your VCR has the
same
function
as
its
corresponding
button
on
the
remote control handset.
MODEL
:
BC999NY
MODEL
1234
5
678
:
Controls
BC984NY
1234
5
678
AV3
VIDEO IN
L-AUDIO IN-R
REC ITR
PROG.
OPR
(AV3)
VIDEO IN AUDIO IN
L
1413
12
11109
P/STILL
PROG.
1413
12
11
1.
Power
2.
Stop
3.
Cassette
4.
VCR
5.
REC/ITR
6.
Rewind
13. Audio In Sockets
7.
PLAY
14. Video In Socket
(on/off)
&
Tape Eject
Compartment
Display
(Instant Record)
REC ITR
R
8.
FF
9.
Pause/Still
10. OPR
9
(see p.17)
11. Remote Control Sensor
12. Channel
Programme
Selectors
(L/R)
5
YourVCR's
The
Conectis
on the next two pages is the most common forms of connection. However
your manufacturers instruction books for specific information. Make sure all
connections are made with both your VCR and additional appliance unplugged from the mains
to avoid damaging your equipment. To enjoy playing back you must connect the VCR to the TV
using a SCART lead.
guidance given
please check with
ToaTV
Aerial
Following picture will
display on the TV screen
when you have just
All connections
tuning
must be made
p.
ENTREE
ANTENNE
EURO AV2
DECODER
AUDIO
SORTIE
OUT
G
L
D
R
AERIAL
SORTIE
ANTENNE
EURO AV1
AUDIO/
unplugged
from
VIDEO
the mains.
TV
Aerial Connection
stations, please follow
stages 3 to 4 as shown
(see
Back view of your VCR
with both your
VCR and TV
connected your video
recorder for the very first
time.
"ACMS"
quality of the sound and
picture can be greatly influenced
by the positioning, quality and
state of repair of your external
aerial.
Using your VCR very
first time
To make
The
SATELLITE Receiver
Television
11).
Cable
(75 ohms)
Do not
try and
force the connector
into
plug
ACMS
Pr-12
ACMS
OKi
6
place, it should
in easily.
An audio system can be connected to the
AUDIO OUT sockets on the back of your
VCR.
Please remember to turn the
volume to minimum on your Hi-Fi, then
gradually increase the volume; this will
prevent damaging your speakers and
save you from an extremely noisy shock!
Make sure all connections are made with
both your VCR and camcorder unplugged
from the mains to avoid damaging your
equipment. To make connecting your
camcorder easier we have designed the
Audio IN (Left and Right) and Video IN
sockets on the front panel of your VCR.
ToyurHi-F&Camcde
Hi-Fi
REPEAT 1
RANDOM
AL
OVER HI-
DIS
RECORD
RE
FLA
PO
ROC
STEREO
PROGRA
AB
DUBB
9101112
Front view of your VCR
CLASSI
(For example, BC999NY)
AUTO
UTO
MUTE
5678
MEMORY
OR
SLEEP
SEE
NR
SYNC
1234
13141516
UBB
AM
M
KHz
KHz
PM
PM
MHz
MHz
DSP
DISCO
LIV
HAL
60
160
400
1K
2.5K
6.3K
16kHz
AV3
VIDEO IN
L-AUDIO IN-R
PROG.
Audio Left &
Right Lead
Back view of
your VCR
Audio Left &
Right
Camcorder
Lead
ENTREE
ANTENNE
EUR
AV2
DEC
DER
EURO
AV1
AUDIO
SORTIE
OUT
L
AERIAL
SORTIE
ANTENNE
AUD
VIDEO
R
RF.OUT
Video Lead
Audio out sockets & Phono Leads
The
R
=
phono sockets for connecting your VCR to your
Right sound output. You normally have to select
Hi-Fi
are on
the back of the set; L
on your Hi-Fi.
=
Left sound
output,
the AUX function
7
Conectis
Your TV receives signals from the video recorder (VCR) like another TV station.
You have to select a channel number on your TV and tune it in so that you may watch
video tapes.
If you have used SCART or AUDIO and VIDEO cables then your TV should already
have a dedicated video channel built into it, usually called AV.
Tunig a Videochanl OnyourTV
The
Make
VCR
as
in this book.
Press POWER to turn
used
by
and press PLAY
remote control.
on
the
Turn
on
P/STILL
FF
STO P
your TV.
(VCR)
Select
EJECT
already
POWER
another TV
a
is
sharp
Store this channel
your TV.
on
and the sound is clear.
If you have used a
SCART or AUDIO and
You will need to look at
VIDEO cables you will
not have to tune your TV,
you do not know how to
do this.
simply
TV channel
select the AV
Don't worry if you don't
on
a
at this
you how to
change the
output frequency of your
on
VCR.
video
on
video-tape
stage!
to
play
If you switch your VCR
and continue stages
3
4, instead of seeing
~
playback
TV until you
blue screen.
8
picture
channel. The AV channel
channel of your VCR.
Stages 5 8 will show
~
the video
which you
wish to watch video's.
number
have
the transmitter
Tune this channel until
on
PLAY
station, or if the picture is
distorted, you can
change
pre-recorded
a
tape into your VCR
REW
is set at UHF channel 36.
If channel 36 is
Insert
video
your VCR.
output frequency of
this video recorder
that you have
installed your
described earlier
sure
correctly
tune your
see a
bright
is already pre-tuned for
optimum video playback
your TV.
the TV instruction book if
Only carry out stages
5~8ifyoucannot
obtain clear video
playback as described
instages1~4.
Select
a
TV channel
number on which you
wish to watch video's.
Make
is in
sure
that your VCR
Press PROG.
Press PROG.
or onthefrontof
select another video
your VCR for
4 seconds.
channel.
more
POWER
will be
on
to
Select
TV channel
a
number
a
L-AUDIO IN-R
blue
following picture will
displayed on the TV
Store this channel
your TV.
You may select any
channel number between
the remote
22 and 68.
(only the clock
displayed).
RF
CHANNEL
:
a
video channel
dedicated
on
your
TV. If you do not tune in
a dedicated video
PROG.
be
channel on your TV you
will be unable to view
on
and record video
Press
on
that
successfully
tuned in
screen
The
screen.
that
appears.
AV3
VIDEO IN
bright
so
sure
you have correctly
installed your VCR
and
CH36 will appear in the
VCR display.
PR
Make
which you
wish to watch video's.
on
Tune this channel
standby pressing
control
than
or
the front of
your VCR when you
have finished.
36
i
9
tapes!
This VCR
The
How to
Usingthemau
Switch
on your TV set
and video recorder by
button.
programmed by using
Press i button.
The main
appear
EJECT
the
displayed
menus
on screen.
on
menu
Press F and G to select
Press "i" to return to
the desired
TV
menu.
a
picture.
will
the TV
screen.
Press OK and press D
or
CLEAR
i
OK
OK
CLK/CNT
OK
i
i
CLK/CNT
CLK/CNT
12
Pr-12
REC
PR
ACMS
TIME
DATE
SYSTEM
AUDIO
O
You
O
select the
English,
Russian, Deutsch,
and Polski.
O
O
O
10
REC
Timer
ON
OFF
16:9
4:3
-
-
VCR
DR
OSD
REC
OKi
OPR
recording setting (see p. 26 to 27).
tuning setting (see p. 12 to 13).
ACMS ACMS (Automatic Channel Memory System) (see p. 11).
TIME DATE
Date & clock setting (see p. 23).
SYSTEM To set the Colour TV System (see p. 22).
ABC OSD To change the language setting for OSD (see left).
DR To check a problem with your VCR (see p. 31).
PR
AB
C
NIC
fOSD
O
Francais,
be
controlled from the REMOTE CONTROL HANDSET.
POWER
SELECTION
among
easily
E to select.
O
language
the POWER
pressing
LANGUAGE
can
can
menus are
O
Manual
AUDIO
-
To select the channel for audio output (see p. 33).
To select the channel of audio output according to
RF AUDIO
-
your TV type
D/K TV).
-
-
-
O
OSD ON/OFF
-
-
O
16:9/4:3
O
OPR
O
NIC
-
-
-
To
-
To
("B/G"
for PAL B/G TV, "D/K" for PAL
display the operational
(see p. 28).
mode of your VCR
To select the aspect ratio of your TV
improve the playback picture (see p.
To activate
(see
p.
33).
or
deactivate the NICAM
(see p. 30).
17).
digital sound
If the TV broadcast
to store them
signal is weak your VCR may not detect the necessary information and will be and
correctly. To overcome this problem please turn to the MANUAL TUNING section on
page 12 to 13.
Press POWER to turn
on
Press i.
Press OK
your VCR.
again to start
tuning
the automatic
The main
appear
menu
will
the TV
on
process.
TABLE will appear when
tuning is complete.
screen.
Press i to
Press F
or
G
Automaicly TVStaions Tunig n
The TV STATION
save
your
settings.
to select
the ACMS.
Press OK.
CLEAR
EJECT
OK
i
POWER
CLK/CNT
CLEAR
OK
OK
12
Pr-12
REC
PR
ACMS
TIME
DATE
16:9
4:3
OPR
NIC
fOSD
AUDIO
ON
OFF
SYSTEM
AB
C
VCR
OSD
DR
CLK/CNT
Pr-12
ACMS
OKi
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
ACMS
S
Pr-12
ACMS
i
i
CLK/CNT
OKi
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
E
Pr-12
ACMS
01
i
PR
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
11
In certain
areas of the country broadcast signals may be too weak for your VCR's automatic
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations manually in order for your VCR to
store them.
tuning
M
a
n
u
l
y
Tunig n TVStaions
Press i.
Press AV to select C
The main
(Standard stations)
(Cable stations):
menu
the TV
on
appear
Press F
will
or
screen.
C02
G to select
-
C71, S01
-
S
or
Press G to select MFT.
Press G to select
Press D
STATION
or
E to
adjust.
S41.
CLEAR
CLEAR
the PR.
OK
CLEAR
OK
i
i
OK
CLK/CNT
Repeatedly press D
EtotuneintheTV
Press OK.
so that you
may name your TV
station.
i
CLK/CNT
or
station.
CLEAR
OK
i
If you know the broadcast
station number of your
particular TV station you
CLK/CNT
may enter its number
the
directly by using
12
Pr-12
REC
PR
ACMS
TIME
DATE
AUDIO
PR
01
ON
OFF
SYSTEM
AB
C
VCR
OSD
DR
number buttons
16:9
4:3
CH
C--
12
the
OKi
OPR
MFT
--
PR
STATION
-
-
-
CHANNEL/CABLE
PR
on
remote control.
PR
NIC
fOSD
-
01
-
:
MFT
00
STATION
CHANNEL/CABLE
AV
i
CH
C02
PR
PR
01
:
AV
i
CH
MFT
C02
+04
STATION
CHANNEL/CABLE
PR
PR
01
:
CH
MFT
C02
+04
STATION
AV
i
PR
OKi
Press OK.
Press D
or
E to select
letters and numbers for
the
new
station
Press i, confirm the
station
Press i
Your
name.
PressForGtomove
back and forth between
characters.
again.
placement.
If you wish to manually
tune other stations
repeat stages
1
-
new
TV station has
been tuned into your
VCR.
now
7.
Press OK.
OK
i
CLEAR
CLK/CNT
OK
OK
i
OK
i
i
CLK/CNT
CLK/CNT
CLK/CNT
01
02
03
PR
01
PR
CH
MFT
C02
+04
STATION
PR
01
-
OK i
PR
CH
MFT
STATION
C02
+04
TV2
--
TV2
+04
--
--
--
04
--
--
05
--
--
06
OK i
C02
-----
-----
-----
-----
--
--
-----
07
--
--
-----
08
--
--
PR
-----
MOVE
:
DELETE
:
,
OKi
13
After
TV stations into your VCR you may wish to change the order in which they
having to retune them against! The instructions given on this page will
tuning
are
stored without
show you how you
Changi theord f TVStaions
Press i.
simply
can
move
them into your desired order.
Press i.
Press D
or
E to select
the programme number
The main
menu
appear
Press F
will
the TV
on
or
Press D
screen.
G to select
or
E to select
the programme number
you want to move
example, PR 03).
you want to move to
example, PR 05).
(for
Press OK.
The selected programme
will be moved to the new
programme number.
(for
If you wish to move other
TV stations repeat
the PR.
1
stages
Press G.
-
4.
Press OK.
Press i to
CLEAR
i
OK
12
Pr-12
PR
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
DR
16:9
4:3
C02
00
PR-01
02
C03
00
TV2
03
C04
00
PR-03
04
C05
C06
00
05
00
PR-04
PR-05
06
C07
00
PR-06
07
C08
08
C09
OKi
OPR
PR
PR
14
i
i
CLK/CNT
CLK/CNT
PR-08
00
MOVE
:
DELETE
:
,
OKi
C02
00
PR-01
01
C02
00
PR-01
01
C02
00
PR-01
C03
00
TV2
02
C03
00
C03
00
C04
00
PR-03
03
00
03
00
PR-05
04
C05
C06
00
04
C05
C06
TV2
PR-04
02
03
00
TV2
PR-03
PR-04
05
C04
00
PR-03
05
C04
00
PR-05
06
C07
00
PR-06
06
C07
00
PR-06
PR-07
07
C08
00
08
C09
00
CH
MFT
STATION
04
C05
00
PR-04
C02
00
PR-01
05
06
C06
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
07
C08
00
08
C09
00
PR-08
08
C09
00
CHANNEL/CABLE
PR
PR-07
00
OK
OK
02
01
01
CLEAR
PR
NIC
fOSD
AUDIO
i
CLK/CNT
01
ON
OFF
the
screen.
OK
CLK/CNT
REC
remove
from the TV
menus
CLEAR
:
AV
i
PR
OKi
PR
OKi
PR
PR-07
MOVE
:
DELETE
:
,
OKi
After
TV stations into your VCR you may wish to delete a station.
given on this page will show you how easily delete any unwanted TV stations.
tuning
The instructions
Press i.
Press i.
Press i to
Press F.
menus
The main
menu
on
appear
Press F
will
the TV
or
Press D
screen.
or
E to select
the programme number
you want to delete.
After
short while, the
a
TVStaions Delting
the
remove
from the TV
screen.
How to selecting
Stored TV
stations:
selected station will be
If you wish to delete
other TV stations repeat
deleted.
G to select
the PR.
stages
1
-
Stored TV stations
be selected in
either of two ways.
Press D or E to select
different stations that are
tuned into your VCR.
can
3.
Press OK.
CLEAR
OK
i
CLEAR
CLK/CNT
OK
i
CLK/CNT
CLEAR
CLEAR
You may also directly
select stations using the
numbered buttons on
the remote control.
CLEAR
OK
12
Pr-12
REC
PR
ACMS
TIME
DATE
16:9
4:3
OPR
PR
01
ON
OFF
SYSTEM
VCR
OSD
DR
i
i
CLK/CNT
CLK/CNT
PR
NIC
fOSD
AUDIO
OK
i
OK
AB
C
CLK/CNT
OKi
CH
MFT
STATION
C02
00
PR-01
01
C02
00
PR-01
01
C02
00
PR-01
01
C02
00
PR-01
02
C03
00
C03
00
PR-02
02
C03
00
00
03
C06
00
PR-02
PR-03
00
PR-03
PR-04
03
00
C05
C06
00
04
C05
C06
PR-02
PR-03
PR-04
02
03
C04
00
PR-04
05
C04
00
PR-05
00
PR-06
PR-05
PR-06
00
C07
00
00
C07
06
C04
C07
04
05
06
C08
00
07
C08
00
PR-07
07
C08
00
PR-07
07
C09
00
PR-08
08
C09
00
08
C09
00
04
05
06
08
--
123
456
PR-05
PR-06
789
PR-07
--
-----
TV/VCR
CHANNEL/CABLE
PR
:
AV
i
PR
MOVE
:
DELETE
:
PLEASE WAIT
,
OKi
PR
DELETE
:
MOVE:
,
OKi
PR
DELETE
:
,
OKi
15
0
CM SKIP
You will
Playbck
only
be able to load and
Your VCR may also playback
Getting a better picture
a tape
When
a
eject video cassettes when your VCR is plugged
recordings from NTSC tapes (on PAL TV).
cassette is inserted and
playback started,
the automatic
tracking
into the mains.
function works to
get
the best possible picture automatically. If the quality of the recording is poor, repeatedly press
D or E on the remote control to manually adjust the tracking until any distortions have been
removed. Press numbered 0
Make
VCR
that you have
connected your
described earlier
sure
correctly
as
in this book.
on
the remote control to switch automatic
Press PLAY to start
Press P/STILL to still
picture.
side
Press POWER to turn
your VCR.
facing up and
arrow facing away
on
again.
playing
your tape.
The video cassette
your TV.
on
Insert the video cassette
P/STILL
REW
FF
PLAY
on
back
into your VCR.
should have the window
Turn
tracking
the
a
Press P/STILL
to advance
the tape frame by frame.
repeatedly
STOP
from
you.
P/ STILL
If you load a video
cassette which has had
REW
FF
PLAY
STOP
its record
removed
protection tab
(playback of the
cassette will start
automatically).
EJECT
POWER
AUTO TRACKING
Your VCR will automati-
cally adjust the tracking
to give the best picture
quality.
REC/
can be paused for
up to 5 minutes. After 5
minutes your VCR will
stop the tape to prevent
Tapes
damaging
your VCR
the
tape
or
.
Still
picture quality can
improved slightly by
pressing D or E.
be
CLEAR
OK
CLK/CNT
16
i
Press PLAY to continue
Press STOP to end
playing
playback.
your tape.
Picture search:
During playing
P/STILL
back
REW
press either FF or REW
to this will enable you to
rapidly wind the tape (7
times normal playback)
see
the
where you
are on
FF
P/STILL
REW
FF
PLAY
STOP
(Commercial
Message) Skip:
OPR (Optimum
Picture Response):
This feature enables you
during playback of a tape
This feature
PLAY
to
STOP
break in
skip
a
commercial
a
REC/
then
few seconds,
normal
resume
During playback
of
the condition of the
select
front of your VCR.
tape.
(BC999NY)
Press 1:
While
EJECT
tape is playing
press CM SKIP on the
remote control to skip
commercial
POWER
(or another
material).
programme
Press F
or
To make
G to select
Press 2:
Press 3:
To switch off.
CM SKIP
0
tape is
reached, your VCR will
stop playback automatically,
rewind, stop, eject the
tape and place itself into
power off mode.
picture
To make it clearer.
Press OK.
SHOWVIE
If the end of the
a
softer.
OPR.
CLEAR
TV/VCR
RE
Repeatedly
press
CM SKIP to
skip:
OFF
SOFT
SHARP
ON
AUDIO
OFF
16:9
4:3
12
TIME
DATE
SYSTEM
AB
C
VCR
OSD
DR
NIC
OPR
i
OPR
1 Press
30 seconds
Press D
2 Press
60 seconds
to select:
3 Press
90 seconds
SHARP.
4 Press
120 seconds
Please note you may
5 Press
150 seconds
OPR when
6 Press
180 seconds
or
E
repeatedly
OFF, SOFT
playing
a
Press i return to
only
tape.
can
picture
sharpness by
pressing OPR on the
Press i.
Press EJECT.
video
a
cassette you
automatically
improves playback
picture quality by
adjusting your VCR to
playback.
tape.
Logic search:
During fast forwarding or
rewinding press and hold
FF or REW the picture
will be played back at 7
times normal playback
speed.
CM
or
set
screen.
17
Your VCR
Other
incorporates
a
number of
tape search features that enable you
to
quickly
search
a
tape for your particular recording.
Playbckfeturs
During playing back or
picture press j or k
repeatedly to obtain
different playback
speeds.
still
Press
or
to
improve
Press PLAY to
tape back
picture quality.
play
your
Press STOP.
at normal
STOP will appear for a
few seconds on the TV
speed.
screen.
P/STILL
CLEAR
REW
FF
P/STILL
PLAY
OK
i
REW
STOP
REC/
STOP
ITR
OK
CLK/CNT
18
FF
PLAY
CLK/CNT
CLEAR
REC/
i
ITR
Fast Forward
(FF):
Rewind
(REW):
Press FF.
Press REW.
The
The
tape will rapidly wind
tape will rapidly wind
forwards.
backwards.
FF will appear for a few
seconds on the TV
REW will appear for a
few seconds on the TV
screen.
screen.
P/STILL
P/STILL
REW
FF
REW
FF
PLAY
PLAY
STO P
STOP
REC/
REC/
19
Your VCR allows you to make recordings using a variety of simple methods:
Instant Timer Recording (ITR) start recording immediately for a set period of time
video cassette
Recording TVprogames
Make
VCR
that you have
connected your
described earlier
sure
correctly
as
a
video cassette
protection
tab into
your VCR.
Press
to select
or
the programme number
you wish to record.
Press POWER to turn
your VCR.
on
should have the window
side
facing up and
arrow facing away
you.
EJECT
POWER
happen
quite easily by
accident!)
or
AUDIO sockets
press AV until
the socket you wish to
record from is displayed.
CLEAR
OK
from
i
SHOWVIEW
LP
AV
CLK/CNT
VIDEO Plus+
C.LOCK
You may also directly
select programme
using
the
numbered buttons
the remote control.
the
If you wish to record
from the SCART
directly
the
number
can
until the
repeatedly
The video cassette
tape (this
remove
Insert
with
or
out.
in this book.
If you do not
wish to record
on a
runs
protection tab on
edge of
on
SC01 Hi-Fi Sound only
recording using the
AUDIO IN sockets on the
front of your VCR.
AV 1 for recording from
EURO AV1 SCART socket.
the back
the video
123
cassette.
456
It is
possible
record
to
789
on a
video cassette
TV/VCR
with the record
protection tab
removed by
covering the
hole with self
adhesive tape.
20
0
CM SKIP
AV 2 for recording from
EURO AV2 SCART socket.
AV 3 for recording from
VIDEO IN and AUDIO IN
(Left & Right) sockets on
the front of your VCR.
Your VCR
incorporates Long Play (LP) which enables you to record up to twice the amount of
video cassette. For example an E-180 will record up to 180 minutes using Standard
Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a
slight loss in picture and sound quality when using LP.
time
on a
Press LP if you wish to
Press REC/ITR to start
Press P/STILL to avoid
record in
recording.
recording
Standard
Long Play
Play.
SP will
or
produce improved
and sound quality,
however LP will provide
twice as much recording
as
SP.
Press STOP to end
Remember you
can record one
recording.
programme while
scenes.
RECORD will appear
the TV screen.
Press EJECT.
on
picture
time
unwanted
Press P/STILL to continue
Press REC/ITR several
times. Each successive
press will increase the
record time by 30 minutes
until you reach a
maximum of 9 hours.
watching another
by starting your
instant recording, press
recording.
Tapes
can
be
paused
for
up to 5 minutes; RECP
will be displayed when a
tape is paused. After
EJECT will appear on the
screen and on the
TV
video recorder's
for
a
TV/VCR to select TV
mode and then
display
few seconds.
a
your TV.
5
minutes your VCR will
stop recording
56
to
prevent
damaging the tape or
789
TV/VCR
your VCR.
SHOWVIEW
P/STILL
REW
FF
PLAY
STOP
REC/
ITR
TV/VCR
0
CM SKIP
FF
EW
PLAY
EJECT
P/STILL
SHOWVIEW
LP
STOP
AV
REC/
VIDEO Plus+
C.LOCK
POWER
REW
FF
PLAY
ITR
STO P
12
selecting
different channel
CLEAR
REC/
ITR
21
0
LP
CM SKIP
on
Your VCR is
equipped
with
triple
colour standard, you
can
play
back
a
tape in PAL B/G and
SECAM D/K.
your VCR detects the colour system automatically.
colour problem please select the colour system manually.
During playback
It there
Tosethclurym
are
Press i.
Press OK.
The main
menu
on
appear
Press D
will
the TV
screen.
or
G to select
E to select
COLOUR
system used.
screen.
CLEAR
PA L : PAL
OK
recordings
recordings.
CLEAR
i
CLK/CNT
CLEAR
OK
CLK/CNT
12
Pr-12
PR
ACMS
TIME
DATE
fOSD
AUDIO
22
ON
OFF
SYSTEM
NIC
16:9
4:3
OPR
AB
C
VCR
OSD
DR
SYSTEM
i
the
selection,
MESECAM: MESECAM
REC
remove
from the TV
menus
AUTO: automatic colour
i
CLK/CNT
the SYSTEM.
OK
Press i to
to the
CLEAR
OK
Press F
or
according
AUTO
PAL
MESECAM
SYSTEM
NIC
AB
C
VCR
OSD
DR
SYSTEM
i
i
CLK/CNT
i
The clock in your VCR controls time and date settings for your VCR.
For ShowView to work correctly the current time and date must be set.
Press i.
Use the numbered
buttons
Press F
or
G to select
on
the remote
control to alter the
TIME DATE.
HOURS, MINUTES,
DAY, MONTH and
Press OK.
YEAR.
If you make a mistake
press F or G and enter
the correct details.
Manu l y
Press i.
CLEAR
CLEAR
OK
OK
i
i
CLK/CNT
Please note your VCR
24 hour clock.
CLK/CNT
uses a
e.g. 1pm will
displayed as
The
day
be
13:00.
of the week will
appear automatically
when you enter the year.
123
CLEAR
456
OK
i
789
TV/VCR
:.
-
-
--
8
--
--
CM SKIP
HHMMDDMMYY
HHMMDDMMYY
--
0
---
:.
00110100TUE
.
.
12
12
TIME
DATE
i
TIME
DATE
i
23
Setinghclok
ShowView
greatly simplifies entering the date, channel, start and end times of a Timer Recording
by simply entering a ShowView Code. ShowView Codes are published in most TV guide
magazines; they can vary one to nine numbers in length.
ShowVie Progaming
Timer
Recording you may record
recordings may be
these automatic
Make
sure
that TV
at
a
later time
Press SHOWVIEW.
Press D
channels have been
the
tuned and stored in
correct SHOWVIEW
order.
to 1 month from the
or
E to select
LP
Press the numbered
ShowView Code of the
ONCE: To record
SHOWVIEW
to 7 of
present). Up
buttons to enter the
recording type.
CM SKIP
0
TV/VCR
(up
set.
once.
AV
VIDEO Plus+
TV programme that you
wish to record.
C.LOCK
Insert
with
a
WEEKLY: To record at
video cassette
protection
the
tab into
same
If you make a mistake
press F then enter the
time every
week.
your VCR.
revised number.
DAILY: To record every
day (except Saturday
and Sunday) at the same
time.
123
CLEAR
456
OK
i
789
CLK/CNT
0
TV/VCR
-----------
RECORD
SHOWVIEW
24
:
0~9,
RECORD
OKi
SHOWVIEW
:
SKIP
246-876-543
-----------
ONCE
CM
RECORD
ONCE
0~9,
OKi
SHOWVIEW
:
ONCE
0~9,
OKi
SHOWVIEW is
a
registered trademark of Gemstar Development Corporation.
System is manufactured under licence from Gemstar Development Corporation.
The SHOWVIEW
Press OK.
Press F
If PLEASE CHECK is
displayed
it
means
that
you have entered the
wrong ShowView
incorrectly.
If
"- -"
is
displayed,
you
PressDorEifyouwish
Long Play.
to record in
SP will
correct information.
time
If PLEASE CHECK is
If you are recording from
stations that do not
Check that the timer
E to enter the
programme number of
the station, you want to
SP.
as
event details
are
(
on
symbol
the TV
record from.
you have
entered incorrect
information and will need
OK
on
i
i
CLK/CNT
CLK/CNT
can
be
particularly
useful with
sports
signal
is transmitted
PR-01
DATE
10
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
PR
TIME
12
--
--
::
111155
SP
::
SP
~
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
PR-01
the front
Currently only
SCART socket
on
to select for
the back of
display (AV1,
AV2
or
TIME
12
10 ::
111155
SP
::
--
SP
--
SP
--
SP
--
--
--
--
--
--
--
--
--
--
SP
--
--
--
SP
--
--
--
SP
SP
SP
--
VPS/PDC
i
--
:
PR
~
--
--
~--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
PR-01
DATE
--
--
--
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
REC.
OFF
i
SPEED
10
EJECT
POWER
AV3).
--
--
--
--
--
--
::
111155
SP
::
SP
~
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
:
-~
--
--
--
--
--
--
limited
companies
transmit VPS/PDC signals.
(BC999NY)
when
TIME
12
a
number of TV
from the EURO
or
VCR, press AV
correct
DATE
by
controls your video
recorder's timer.
your VCR power off
mode.
Please make
PR
events
which may run over into
extra time. The VPS/PDC
Press POWER to switch
i
If you wish to record from
AUDIO IN(L/R) and VIDEO IN
CLEAR
a
timer record event. This
displayed,
correct.
the
the broadcaster and this
disappear
screen).
OK
start and end times of
CLEAR
will
CLEAR
OK
Press i twice.
to re-enter the data.
switch to VPS/PDC off!
*
Programme
System(VPS)/
Programme
Delivery Control
(PDC) system adjusts
recording repeat stages
2-7.
or
The Video
picture
broadcast VPS/PDC
have to enter the
If you want to make
another ShowView
produce improved
and sound quality,
however LP will provide
twice as much recording
Press D
number, entered the
ShowView number
G to select the
or
settings that you wish to
revise. (PR, DATE, TIME,
VPS/PDC(BC999NY)
and SP).
TIMER will appear in the
video recorder's display
SP
SP
while your VCR waits to
make the recording.
SP
SP
SP
SP
sure
recording
that
from
channels that do not
broadcast VPS/PDC
that you turn VPS/PDC
OFF.
i
25
If you choose not to use ShowView, you can set timed recordings manually.
You may set up to seven timer record events within one month of the current date PLEASE
NOTE! before setting the timer make sure that you have set the VCR clock correctly and
you know which stations you have tuned TV stations
Timercodng UsingOScreDplay
Insert
with
a
video cassette
protection
Press i.
Press OK to start
tab into
your VCR.
setting
the timer record event.
Press F
your VCR.
on
G to select
or
REC.
The video cassette
OK
Press the numbered
buttons to enter the
station that you wish to
record.
i
123
should have the window
side
facing up and
facing away
arrow
Press OK.
CLK/CNT
456
the
from
789
R
you.
If all timer record events
OK
CM
0
TV/VCR
SKIP
arefullpressDorEto
i
select the event that you
remove and
CLK/CNT
wish to
When
stations 1
9,
first, then the channel
selecting
press 0
-
number; for example Stations
replace.
3
-
03. You may also select
Press F to delete the
Channels
event.
Once selected press
by pressing
G.
or
.
If you wish to record from
AUDIO
CLEAR
12
Pr-12
PR
REC
ACMS
TIME
DATE
AUDIO
ON
OFF
PR
--
--
SYSTEM
AB
C
VCR
OSD
DR
16:9
4:3
OKi
OPR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
DELETE:
26
OK
i
REC
NIC
fOSD
on
CLK/CNT
--
--
--
--
--
--
,
SP
SP
SP
SP
SP
SP
SP
OK i
--
--
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
and VIDEO IN
from the EURO
SCART socket
on
to select for
PR-01
DATE
--
--
--
--
--
--
SP
--
--
--
SP
--
--
--
--
--
--
--
--
--
SP
SP
SP
SP
i
AV2
or
AV3).
TIME
--
--
SP
the back of
display (AV1,
PR
TIME
--
or
VCR, press AV
correct
PR
--
IN(L/R)
the front
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
If at
If Timer record
later date you wish to delete or change any of the settings in timer event memory you may
without having to enter all the timer event information again. Simply display the timer
event screen. Press D or E to select the event that you wish to delete or change.
a
do
events
so
Make
Press F to delete the event...or
(BC999NY)
sure
that the
preset times of the
then press F or G to select; Station, Date, Start and End times, VPS/PDC
and LP. Press D or E to enter the correct information.
Press OK to
Overlap...
change;
timer
not
recording events
overlap. If they do,
do
the earlier programme
always be given
will
Press the numbered
Press the numbered
Press D
buttons to enter the date
buttons to enter the
VPS/PDC
of the programme.
recording
start and end
times of the programme
that you wish to
123
record.
456
789
0
TV/VCR
CM
SKIP
If you press OK before
entering the date you
may select one of the
following automated
recording features. Press
F or G to select, then
press OK to confirm.
DLY To record every day
(except Saturday and
Sunday) at the same
time.
To record at the
time every week.
Weekly
same
PR
DATE
TIME
--
PR-0116---
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
SP
SP
SP
SP
SP
SP
::
SP
DLYSUMOTUWETHFRSA
--
--
--
--
-~
(BC999NY)
CM
broadcast VPS/PDC
displayed,
on
symbol
the TV
you have
entered incorrect
will
disappear
screen).
or
G and press
DorEifyouwishto
record in Long Play.
Please note your VCR
24 hour clock.
uses a
and will need to re-enter
Programme 2 is
programmed to start
the data.
16:30 and end at 18:00.
Press POWER to switch
(In
at
your VCR
this case, Programme
1 will be recorded in its
Standby.
entirety,
Programme
recorded.)
13:00.
You may also select the
the start and end times
or
but
only
the last
30 minutes of
be
by pressing
at
16:00 and end at 17:00.
SKIP
Press F
e.g. 1pm will
displayed as
Example:
Programme 1 is
programmed to start
If PLEASE CHECK is
*
priority.
correct.
If you are recording from
stations that do not
(
0
are
Press i twice.
456
TV/VCR
Check that the timer
event details
off.
switch VPS/PDC off!
CLEAR
EJECT
OK
2 will be
PROGRAMME 1
POWER
i
17:00
16:00
.
CLK/CNT
18:00
PR-01
--
PR
DATE
TIME
16
19002000
::
SP
::
SP
DATE
TIME
16
19002000
::
SP
SP
--
--
--
::
SP
--
--
--
SP
--
--
--
SP
--
--
--
--
--
--
--
--
--
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
OK i
on or
123
789
PR
--
E to switch
or
::
--
-~
--
PR-01
SP
SP
--
VPS/PDC
i
:
~
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
16:30
TIMER will appear in the
video recorder's display
SP
SP
PROGRAMME 2
while your VCR waits to
make the recording.
SP
SP
SP
ON
(This portion
recorded)
i
27
will not be
Your VCR has
an
which if set will
Energy Save feature
place your VCR into an
You may
economic power save where the clock
display will disappear. If you have
programmed a recording, this feature
EnergySavin OnScreDisplay
Press POWER
on
the
Press POWER
VCR
on
the
and your
VCR will go into Energy
again
The VCR and clock will
Save.
appear on the video
recorder's display.
All indicators will turn off
the current time
Press OK/CLK/CNT to
Press OK/CLK/CNT
display.
repeatedly
display
CLEAR
Press OK/CLK/CNT
i
again to
displays
CLK/CNT
in the video recorder's
display.
Energy
remove
all
from the TV
screen.
Press POWER to switch
Save.
Channel
VCR
Function
Programme
STOP
PR-01
CLEAR
OK
CLK/CNT
14.01.00 FRI
12:00
Day/Month/
Year/Day of
Week
Clock/Tape
Counter &
Amount of
Tape Left
After 3 seconds the
display will
leaving the
display.
28
to
TAPE COUNTER.
OK
off
or
VCR will appear on the TV screen.
If a recording is taking place these On
Screen Displays will not be recorded onto
the tape.
will not work.
VCR.
easily display
tape counter, amount of tape left, day,
month, year, day of week, programme
channel, and operational mode of your
clear
only
CLOCK
on
i
the
The
Digital Tape Counter can be
displayed on your VCR's display instead
of the time by pressing OK/CLK/CNT
on the remote control. The Digital Tape
Counter indicates the relative positions
of recordings on the tape.
Press OK/CLK/CNT.
Press STOP when
Press CLEAR to set the
playback
complete.
counter to 0:00:00.
or
The control buttons
VCR
VCR
or
start
The
tape
display
only
be
so
that your
the
operated using
Press C.LOCK
is
again
ChildLock
to
switch off the child lock.
SAFE will appear
on
SAFE will
screen.
Press REW.
on
recording.
the front of the
remote control.
the TV
Press PLAY
can
Press C.LOCK.
recording
on
be switched off
can
the TV
disappear
screen.
SAFE will flicker in your
counter will
the actual
play
time in hours, minutes
and seconds.
The
tape will rewind and
automatically stop
when
video recorder's
for
a
display
few seconds.
the counter returns to
for
None of the buttons
0:00:00.
OFF will flicker in your
video recorder's
a
display
few seconds.
on
the front of your VCR will
OK
i
CLEAR
CLK/CNT
OK
work
(except
EJECT)
STOP/
i
P/STILL
CLK/CNT
REW
FF
PLAY
P/STILL
STOP
REW
FF
PLAY
REC/
ITR
ST
If any buttons on the
front of your VCR are
pressed SAFE will flicker
in your video recorder's
for a few seconds.
display
29
TapeCountrMmyS
Your VCR
WideScrn Compatibly
16:9
Switch
wide
can
record and
back wide
play
format programme
be broadcast by the TV station.
a
screen
your VCR.
on
Press D
or
to select:
Press i.
E
screen
successfully
repeatedly
AUTO,
4:3
or
16:9.
aspect ratio programmes (16:9). To record
type of wide screen signal must
the correct
Press i to remove the
from the TV
To
screen.
connect your VCR to the
menus
enjoy Wide-Screen
playback you must
TV
Press F
or
G to select
CLEAR
16:9/4:3.
OK
i
OK
Press OK.
CLK/CNT
AUTO:
Automatically plays
back
Wide-Screen
OK
programmes as WideScreen and Normal
programmes as normal.
i
4:3:
CLK/CNT
Only for playing back and
recording Normal format
recordings (4:3).
16:9:
Only for playing back and
recording Wide-Screen
format recordings (16:9).
12
Pr-12
REC
PR
ACMS
TIME
DATE
AUDIO
30
ON
OFF
SYSTEM
NIC
fOSD
16:9
4:3
OPR
AB
C
VCR
OSD
DR
12
Pr-12
REC
16:9
4:3
OKi
PR
ACMS
TIME
DAT
fOSD
AUDIO
ON
OFF
using
cable.
CLEAR
16:9
4:3
OP
SYS-
AB
C
VCR
OSD
DR
AUTO
4:3
16:9
16:9
4:3
i
i
a
SCART
Automatic
Memory
Shut-Off
Video Doctor
This feature of your VCR enables you to
switch off your VCR automatically after
tape rewind has been completed.
Press POWER
during
tape rewind.
The
tape will rewind
(Self-Diagnosis)
This feature informs you that there is
problem with your VCR. These error
messages will appear
to
Press i.
beginning and your
VCR will automatically
Press F
switch itself off.
DR.
on
the TV
a
screen.
PressDorEtochecka
the
or
problem.
G to select
HEAD STATUS
O PLEASE CLEAN:
Clean your video
heads.
Press OK.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its
protection tab in place
EJECT
POWER
NO. OF TIMER PROGRAMME
OK
i
O
CLK/CNT
2Shows the number of
timer
recording.
NEXT TIMER PROGRAMME
O 1 26 10:00~11:00
Shows the current status
of timer recording.
Press i.
12
Pr-12
REC
PR
TIME
DATE
ACMS
AUDIO
ON
OFF
SYSTEM
AB
C
VCR
VCR
OSD
DR
DR
NIC
fOSD
16:9
4:3
OPR
OKi
VIDEO DOCTOR
HEAD STATUS
TAPE STATUS N
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
VCR
DR
OK
i
31
VideoDctr(Slf-agns)
MemoryShut-Of
(easy) power off
Rewind
Sequence of "Stop
Eject
Power Off is operated automatically by
pressing ez POWER OFF.
(easy) repeat
By pressing & holding ez REPEAT
during playing back, the holding section
is replayed twice automatically.
ez
ez
"
ez(easy) operations
During playing
ez
press
back
POWER OFF.
Your VCR will be
ed
as
the
operat-
following
;
During playing back,
press & hold ez REPEAT
at the point where repeat
play
is to be concluded.
Then, your VCR is started
STOP
SHOWVIEW
LP
AV
search.
reverse
SHOWVIEW
VIDEO Plus+
LP
AV
VIDEO Plus+
C.LOCK
C.LOCK
REWIND
ez
POWER OFF
ez
REPEAT
ez
EJECT
POWER
OFF
32
POWER OFF
ez
REPEAT
Release ez REPEAT at
the point where repeat
play is to start.
The
holding section
replayed twice
automatically.
is
Pressing ez REPEAT
again during repeat
play, return to
normal play.
Your VCR will record
and
Hi-Fi stereo sound. In addition it has
playback
a
stereo NICAM
digital
stereo sound decoder. This allows you to record and playback the sound in several different
ways. Video cassettes recorded on your VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi
or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi
Soundystem Hi-FStero
stereo
VCR.
Your VCR's NICAM
digital
Switch
as
well
particular type
received
on
or
The choice is
of sound
or
G to select
L-CH
AUDIO.
R-CH
for
OK
i
on
mono
video
the Hi-Fi stereo
tracks of the
tape.
BIL NICAM
Both audio channels will be
recorded
on
the Hi-Fi stereo
primary language channel (left) will
12
Pr-12
REC
tracks. The
recorded
on
of the video
the
mono
PR
ACMS
TIME
DATE
fOSD
AUDIO
be
ON
OFF
SYSTEM
AB
C
VCR
OSD
DR
AUDIO
NIC
16:9
4:3
OKi
OPR
track
tape.
MONO
The sound is recorded
on
the Hi-Fi tracks and the
mono
track of the video
without any
separation.
and
OK
i
CLK/CNT
i
CLK/CNT
CLK/CNT
recorded
CLEAR
a
of seconds:
automatically
STEREO,
(left channel),
(right channel)
CLEAR
STEREO NICAM
Sound is
Press i.
Press OK.
that recorded
screen
to select
MONO.
OK
and
or
briefly displayed
the TV
couple
Press
Press i.
Press F
as
standard stereo, bilingual
and mono sound. The
will be
your VCR.
AUDIO.
allows you to enjoy
broadcasts with NICAM
sound,
on
sound decoder
STEREO
tape
RF AUDIO
REC
LEFT
B/G
RIGHT
D/K
AUDIO
MONO
AUDIO
i
In BIL NICAM playback
the primary language is
output on the left channel
and the secondary
channel is output
simultaneously from the
right channel when audio
output is set to STEREO.
The primary language
will be output from both
channels when the audio
setting is MONO.
Please note that when
adjusting the tracking
control Hi-Fi stereo
sound may revert to
MONO.
33
A second VCR (for tape copying) should
be connected to the AV sockets on the
front of your VCR or to the SCART
socket on the back of your VCR.
Remember to select the appropriate
audio/video mode by pressing the AV
button on the remote control.
TapeCoying Specifatons
The
General
Power
Power consumption
Video Head
System
Tape speed
format
Maximum recording
time
Rewind time
Dimensions
Weight
Operating temperature
Operating humidity
Timer
Video
Television
ENTREE
ANTENNE
AUDIO
OUT
DECODER
L
AERIAL
SORTIE
ANTENNE
EURO AV1
AUDIO/
VIDEO
D
system
Recording format
RF Reception
RF Output
Input level
RF.OUT
All connections must be
made with both your VCR's
and TV unplugged from the
mains
and
design
specifications are
subject to change
without notice.
SCART Lead
If you use a SCART
lead
picture quality will be
improved and you will
be able to enjoy
stereo sound when
Output
Signal
level
to noise ratio
RF Modulator
Audio
Input level
playing tapes
Output
Back view of playing VCR
Place the video tape that you wish to record
FROM into this VCR
Unauthorised
recording
of
copyrighted
TV programmes, film, video
rights of copyright
34
level
Track
Frequency
Signal
cassettes and other materials may infringe the
owners and be contrary to copyright laws
18 Watts
mode: 3 Watts)
Double azimuth 4
(Energy saving
heads, helical
scanning.
Tape
EURO AV2
110-240V~,50/60Hz.
Approx.
response
to noise ratio
23.39 mm/sec (SP mode)/
11.69 mm/sec (LP mode).
Tape width 12.7 mm (0.5 inch).
4 hours (SP mode, E-240 tape)/
8 hours (LP mode, E-240 tape).
Approx. 65(±10) sec.(E-180 tape).
360x94x270mm(WxHxD)
4.1 Kg.
5oC 35oC
Less than 80%.
24 hours display
-
type.
CCIR standard (625 lines, 50 fields)
PAL/SECAM colour signal
PAL/MESECAM
PAL/SECAM (B/G, D/K)
PAL K/G
VIDEO IN (SCART, RCA type)
1.0 Vp-p, 75 Ohm, unbalanced
VIDEO OUT (SCART type)
1.0 Vp-p, 75 Ohm, unbalanced
More than 43 dBm.
UHF 22-68
(Adjustable)
AUDIO IN (SCART, RCA type)
SCART type: -6.0 dBm, more than
10 kohms
RCA type: -6.0 dBm, more than
47 kohms
AUDIO OUT (SCART, RCA type)
-6.0 dBm, less than 1 kohms
Mono track & Hi-Fi track
Normal: 100 Hz-10 kHz (-6/+3 dB)
Hi-Fi: 20 Hz-20 kHz (-3/+3 dB)
Normal : More than 43 dB (at SP mode)
Hi-Fi : More than 70 dB (at SP mode)
Video Head
Cleaning
Whenever
a
cleaned. This should
However dirt
accumulating
picture
deposit
to become blurred
no
picture
&
sound
on
Check
Is the mains
the head after
plug plugged
can cause
Check
Video
Is the cassette compartment
cassette
Are you
round?
cannot be
is the
trying
the
tapes will
in and switched on?
another channel,
not
playback
normally
points
empty?
to insert the cassette the
Remote
Is the mains
Is the VCR switched
If you have used a SCART lead to connect your VCR
and TV have you selected the AV channel on your
not work
Check the batteries in remote control.
TV?
The
Is the video cassette
tuning,
carry out Automatic
Are the TV channels tuned in
Have you tried
using
your
Tuning again
unstable
another cassette?
picture
TV
Can you get
programmes
Are the aerial leads and
picture
on
acceptable
special
recorded
Are the TV channels tuned in
properly;
Make
are
they
in order?
safety
tab
on
removed to prevent
the video cassette been
recording?
Try another station, maybe a weak signal
Check aerial is it plugged into TV?
tuned
plug plugged
in and switched on?
on
damaged,
have you tried
using another one?
Adjust the horizontal control on your TV.
Check aerial is it plugged into VCR?
Check aerial, is the lead broken or damaged?
sure
channel
RF connector lead
between your VCR and TV connected?
way
Check for local interference
the TV?
cannot be
Has the
top of
the playback
picture is
properly?
Can you minimise the noise bars to an
level with the 0 or D or E buttons?
a
on
right
inserted
control does
Check
playback
of time
Symptom
Have you tuned in a dedicated channel
TV to watch video on?
poor
long period
a
points
maybe a weak signal.
Check aerial is it plugged in? Check aerial,
lead broken or damaged?
or
or ejected from your VCR the video head is
that additional head cleaning should not be necessary.
or
Is the TV switched on?
Try
No
mean
broken up. High quality video cassette
dirt onto the video head, but old or damaged tapes might.
Symptom
No
video cassette is inserted into
automatically
on
that you are
your TV.
using
No NICAM
Make
sound
the station to be recorded.
sure
NICAM in the
a
menu
dedicated TV
is set to AUTO for
recording
No Hi-Fi
Switch "AUDIO" in the
menu
to STEREO.
sound
Auto
Play
does not
Has the
safety
tab been removed from the video
cassette?
work
35
CheckList
Troubleshting
P/N: 3834RP0049C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement