advertisement
▼
Scroll to page 2
of 53
LH-CX245Y.NA8PLL-ENG DVD/VCR COMBI RECEIVER Combi Receiver System OWNER'S MANUAL MODEL: LH-CX245 (Main Unit: LH-CX245Y Speakers: LHS-CX245T, LHS-CX245W CD-R/RW PAL Before please connecting up, operating or repairing this read this instruction booklet carefully and product, completely. CAUTION Warning: To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Warning: To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. Do not place objects filled with water such as vases, on the product. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS ECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. SERIAL NUMBER: You can find the serial number on the back of the unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. Date of Warning: This digital video disc player employs a laser system. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. Warning: To prevent direct exposure to laser beam, do not open the enclosure. Visible laser radiation when open. Never stare laser beam. Warning: directly into the Caution: Do not install this product in a as a book case or confined space such similar unit. This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. Notes on Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 2 ______________________________ ______________________________ Purchase_________________________ Contents Introduction...................4 GeneralFeatures.......................32 SymbolUsedinthisManual...............4 AbouttheSymbolDisplay..............4 MovingtoanotherTITLE...............32 .32 Moving to another CHAPTER/TRACK NotesonDiscs..........................4 HandlingDiscs........................4 StoringDiscs.........................4 CleaningDiscs........................4 TypesofPlayableDiscs...................5 Regionalcode..........................5 Disc-relatedterms.......................6 FrontPanel.............................7 DisplayWindow.........................8 RemoteControl.........................9 RearPanel............................10 InstallationandSetup. . . . . . . . . .11 . TV&SetTopBox .11-12 (or another VCR Connections) Accessory Audio/Video (A/V) Connections to . . . . . . . . . DVD/VCRCombireceiver................13 RadioAerialConnections................13 SpeakerSystemConnection..............14 SpeakerPositioning.....................15 Mini Glossary for Audio Stream & Surroundmode.........................16 SoundMode...........................16 .17-21 BeforeOperation-VCRpart. .17 TuninginavideochannelonyourTV. .17 Using your receiver for the very first time . . . . . . . . . . . . . . . . . . . . Howtousethemainmenu..............19 .19 Tuning in TV stations Automatically .20 TuninginTVstationsManually. .21 ChangingtheorderofTVstations. . . . . . . . . . . . . . . . . . . . . . . DeletingTVstations...................21 .22-27 BeforeOperation-DVDpart. On-ScreenDisplay......................22 InitialSettings.......................23-27 GeneralOperation....................23 . . . . . . . . . . . LANGUAGE.........................23 MenuLanguage....................23 DiscAudio/Subtitle/Menu. .23 DISPLAY...........................24 . . . . . . . . . AUDIO.............................25 5.1SpeakerSetup..................25 .25 DynamicRangeControl(DRC). . . . . . AutoPlay..........................26 DivX(R)VOD.......................26 LOCK(ParentalControl)................27 Rating............................27 .27 Password(SecurityCode). CountryCode......................27 . . . . . . . . . . . . Operation....................27 Playingatape.......................27-31 .27 CM(CommercialMessage)Skip OPR (Optimum Picture Response) .27 .28 InstantTimerRecording(ITR). ShowViewProgramming................29 Timer recording using On Screen Display .30 .31 IfTimerrecordeventsOverlap .31 Change (Deleting) the Timer Programme .32-34 PlayingaDVDorVideoCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RepeatA-B..........................33 Repeat.............................33 3DSurround.........................33 TimeSearch.........................33 Zoom..............................34 MarkerSearch.......................34 SpecialDVDFeatures...................34 TitleMenu..........................34 DiscMenu..........................34 CameraAngle.......................34 .34 ChangingtheAudioLanguage . . . . . . . . . . Subtitles............................34 .35 PlayinganAudioCDorMP3/WMADisc .36 AudioCDandMP3/WMADiscFeatures Pause..............................36 . . . . . . . . . . . MovingtoanotherTrack................36 RepeatTrack/All/Off...................36 Search.............................36 Random............................36 RepeatA-B..........................36 3DSurround.........................36 ProgrammedPlayback.....................37 .37 RepeatProgrammedTracks. .37 ErasingaTrackfromProgramList .37 Erasing the Complete Program List ViewingaJPEGDisc......................38 . . . . . . . . . . . . . . . . . . . . . . . . . SlideShow..........................38 StillPicture..........................38 MovingtoanotherFile.................38 Zoom..............................38 Torotatepicture......................38 To listen to MP3/WMA music watching picture .38 SpeakerSetup.........................39 .40 PlayingaDVDVRformatDisc. . . . . . . . . . . . . . MaintenanceandService.................40 PlayingaDivXMovieDisc................41 Additional Features-VCR part . . . . . . . . . .42-43 . OnScreenDisplay....................42 TapeCounterMemoryStop.............42 .42 Friendly User Guide (Video Doctor) Hi-FiStereoSoundSystem.............43 .43 WideScreenCompatibility16:9 . . . . . . . . . . . . . . . AdditionalFeatures.....................44 LastSceneMemory...................44 ScreenSaver........................44 VideoModeSetting...................44 CopyingfromDVDtoVCR................45 .45 Recording from another video recorder RadioOperation........................45 .46 PresettingtheRadioStations ListeningtotheRadio..................46 . . . . ToCleartheStoredRadioStations . . . . . . . . . . . . . . . . . . .46 .47 TuningintoaStationManually .47 Tuning into a Station Automatically RDSOperation.......................47 . . . . Vocal.............................25 OTHERS...........................26 PBC.............................26 . . . TVAspect.........................24 DisplayMode......................24 ProgressiveScan...................24 TVOutputSelect....................25 . . . SettingtheclockManually................18 Tosetthecoloursystem.................18 . . Search.............................32 .32 ChangingtheAudioChannel Still Picture and Frame-by-Frame Playback .33 SlowMotion.........................33 Random............................33 . . . . . . . . . . . . . . . . Reference....................48 LanguageCodes.......................48 CountryCodes.........................48 Troubleshooting.....................49-50 Specification........................51-52 . 3 Introduction About the To proper use of this product, please read this owner's manual carefully and retain for future Symbol Display ensure reference. " " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service on that specific DVD video disc. Notes Discs on location. Symbol Handling Used in this Manual Discs Do not touch the disc The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of by the playback side of the disc. Hold the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. electric shock. The exclamation point alerts you to the presimportant operating and maintenance servicing instructions. ence / of Indicates hazards unit itself or likely to other material cause harm to the damage. Note: Indicates special notes and operating features. Tip: Indicates tips and hints for A section whose title has is applicable only making the task easier. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. of the following symbols represented by the sym- one to the disc bol. DVD DVD and finalized DVD±R/RW VCD Video CDs CD Audio CDs MP3 MP3 Discs WMA Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static WMA Discs spray intended for older JPEG JPEG Discs DivX DivX Discs Setting the vinyl Output records. Source You must select one of your output VCR) to view on the TV screen. sources (DVD or ?I f you want to view output source of DVD deck: Press DVD on the remote or DVD/VCR on the front panel until DVD indicator source on the front of DVD deck is viewed panel lights on the TV and output screen. ?I f you want to view output source of VCR deck: Press VCR on the remote or DVD/VCR on the front panel until VCR indicator source 4 on the front of VCR deck is viewed panel lights on the TV and output screen. Types of Discs Playable Regional code This DVD player is designed and manufacplayback of region "2" encoded DVD software. This unit can play only DVD discs DVD tured for (8cm/12cmdisc) labeled "2" Video CD (VCD) (8cm/12cmdisc) Notes Audio CD ? (8cm/12cmdisc) on or "ALL". Regional CD-R / CD-RW that contains audio titles, MP3, WMA, and/or JPEG files. Codes Most DVD discs have numbers in it In addition, this unit plays DivX file, DVD -R, DVD +R, DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and clearly a globe visible on with the one or more cover. This number must match your DVD al code or the disc cannot play. ? 2 player's region- If you try to play a DVD with a different region code from your player, the message "Check Regional Code" appears on the TV screen. Notes: ? Depending ment or on the conditions of the the CD-R/RW recording equip- DVD -R, DVD +R, disc itself, some CD-R/RW (or DVD - RW, DVD +RW) (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot be ? played on the unit. Do not attach any seal or label to either side or the recorded side) of a disc. (the labeled side ? Do not use shaped or irregularly shaped CDs (e.g., heartoctagonal) since they may result in malfunctions. DVDs and Video CDs Notes on Some playback operations of DVDs and Video CDs may be intentionally programmed by software manufacturers. This unit plays DVDs and Video CDs according to disc content manufacturer, therefore not be available or designed by the software playback features may some other functions may be added. Manufactured under license from Dolby Laboratories. Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. "Dolby", "Pro Manufactured under license from Digital Theater Inc. US Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 and other US and Systems, world-wide "DTS Digital Digital patents issued and pending. "DTS" and Digital Surround" Theater Theater registered trademarks of Copyright 1996, 2003 Inc. All rights reserved. are Systems, Systems, Inc. 5 PBC: Playback Control (Video CD only) Playback control is available for Video CD (VCD) Disc-related terms DVD±R/DVD±RW DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. re-writable media, are only two standards for meaning the DVD content can be Single-sided discs can hold erased and re-recorded. 4.38 Gigabytes much. There and double-sided discs hold twice are no dual layer single version 2.0 disc formats. PBC allows you to interact system via menus, search functions, or other with the typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) operate in the same way as audio CDs. as sided recordable (DVD video discs only) generally a distinct section of a DVD disc. For example the main feature could be title 1, a documentary describing how the film was made could be title 2, Title discs. A title is VCD and cast interviews could be title 3. Each title is (Video CD) A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB disc) of MPEG-1 full-motion video along with quality stereo sound. MPEG assigned easily. an international standard for video and audio compression. MPEG-1 is used in encoding video for VCD and provides for multichannel surround sound coding such as PCM, Dolby Digital, DTS and MPEG audio. Chapter (DVD video discs only) chapter is a segment of a title such film popular compression format used for digital files that yields very high near-CD quality. WMA Windows media audio file. A developed by Microsoft type of coding / decoding Corp. you to locate it as a scene series. Each in a is chapter assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters a may not be recorded. On a interview in or one Scene MP3 audio enabling A MPEG is MP3 is reference number a (VCD) video CD with PBC (playback control) functions, pictures are divided into sections called "scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks. a moving pictures and still Track JPEG Joint Pictures Expert Group. file format that allows you to on the number of colors. JPEG is save compressed images with no limit a or a track of video DivX is the name on of a the revolutionary new standard for video.You will be able using new video codec MPEG-4 compression to play DivX this DVD/VCR Combi receiver. of audio. as musical piece on a video or audio CD. assigned a track number, enabling you to locate the track you want. DVD discs allow which is based 6 (DVD), Each track is DivX movies A distinct element of audiovisual information, such the picture or sound track for a specific language (with multiple angles) one and several tracks Front Panel OPEN/CLOSE Opens or closes the disc (Z) tray. Pause of playback tape a Press repeatedly Tray (DVD deck) a disc in the DVD or a or Introducin VCR deck remote control here. Insert EJECT(Z) tape in the VCR deck. PAUSE/STEP(X/C) Remote Sensor Point the DVD/VCR Combi receiver Disc the Ejects for temporarily. frame-by-frame playback. STOP disc here. Stops playback of a disc PLAY To back play recorded a tape or or (x) tape. (B) disc. REC/ITR (z) normally or to Timer Recording. To record activate Instant Cassette FM/AM To change between AM Insert and FM bands. a Compartment (VCR deck) video cassette here. PROG./ PRESET Display window DVD/VCR Select (output select) on of your output sources to view the TV screen between DVD and VCR. one PROG./PRESET (+/-) through memorized channels or to control tracking during playing back a tape (VCR mode). To tune in the desired station (Radio Mode). To scan up or down INPUT SELECT Select the VCR deck's VIDEO IN/AUDIO IN source A2 (Tuner, A1, or AV3) (Left/Right) Connect the audio/video output of an external system, TV/Monitor, Another VCR). source Reverse SKIP/SCAN DVD: Go to beginning of current chapter/track or to (S/Q) previous chapter/track. Press and hold for two seconds for VCR: Rewinds the tape during the STOP mode or a for fast fast reverse reverse picture search. search. Forward SKIP/SCAN DVD: Go to NEXT chapter/track. (R/T) Press and hold for two seconds for a fast forward search. VCR: Advances the tape during the STOP mode forward or picture for fast search. VOLUME Control STANDBY/ON Switches the DVD/VCR Combi receiver ON and OFF. Turn the knob clockwise to increase volume, counterclockwise to decrease the volume. 7 Display Indicates current A disc is loaded in the DVD deck. audio stream. loaded in the DVD (Lights when a Window disc is deck.) WMA disc inserted DVD/VCR Combi receiver is in VCR timer mode Indicates the unit is radio mode. or a VCR timer recording is recording programmed. DVD to VCR copy is in progress. DVD/VCR Combi receiver is Indicates current surround mode. a tape. Indicates the unit is playing Lights up when the FM station tuned is transmitting Recording back a tape recorded in Hi-Fi. RDS data. MUTE indicator Programmed playback active A cassette is loaded in the VCR deck. DIGITAL PCM WMA PHOTO dts VCD ST II PROG PROLOGIC RADIO CHP/TRK Hi-Fi DVD RDS MP3 TV RPTALLAB Total Indicates current track number chapter, or channel number. Indicates the unit is TV mode. MP3 disc inserted. Repeat playback mode indicators. VCD disc inserted. DVD disc inserted. Lights up when a JPEG disc inserted. 8 stereo broadcast is being received in radio mode. playing time/Elapsed time/ Frequency/remaining time/ Current deck status/Surround mode/Volume etc. indicators. Remote Control POWER OPEN/CLOSE, Switches DVD/VCR Combi receiver ON and - OFF. - 0-9 numerical buttons Selects numbered in options a menu. EJECT OPEN/CLOSE POWER PROGRAM Accesses Program or removes Removes Select the FM/AM VCR on the as on the AV AV CLK/CNT Selects option in the menu. (b/B): CLEAR SOUND MODE AUDIO SHOWVIEW DISPLAY CLK/CNT RDS menu. REC/ITR Records normally or SET UP/ i Timer DVD: Search TUNING- (.) backward*/go beginning chapter or track or go to previous chapter or track. TUNING+ or for fast tape reverse DISC MEUN FORWARD VCR: Advances the or (>) forward*/go to next chapter or track. tape in STOP mode for fast forward picture REC/ITR BACKWARD PLAY Starts DVD a STOP PAUSE/STEP Selects MARKER SEARCH S-TITLE MUTE ANGLE REPEATA-B REPEAT TV/VCR CM SKIP SPEED TITLE ZOOM search a subtitle language. silence the speaker of the DVD/VCR Combi receiver. TV/VCR Switch between your TV's tuner and the VCR's internal tuner. ZOOM Enlarges RAMDOM DVD video image. TITLE Displays the disc's Title menu, if available. REPEAT A-B/SPEED/REPEAT - if - available. picture menu. MUTE Momentarily - CM SKIP Fast forwards point during playback. S-TITLE (G) angle volume. MARKER SEARCH Displays PLAY playback. camera DVD disc. (+/-) SEARCH ANGLE Selects menu on a Marks any FORWARD (X) Pause playback or recording temporarily/press repeatedly for frame-by-frame playback. into MARKER (A) Stops playback. PAUSE/STEP frequency -Displays functions on the TV screen. -Acknowledges menu selection. Adjusts speaker seconds. STOP radio stations VOLUME PR/TRK/PRESET search. *Press and hold button for about two a DISC MENU seconds. DVD: Search display the programme menu for ShowView programming. SET UP/ i Access or remove setup menu. Accesses search. *Press and hold button for about two (PS). the tuner. RETURN in STOP mode picture SHOWVIEW ENTER of current VCR: Rewinds the or an To check the RDS service programme -Enter OK MEMORY Recording. to language (DVD) (CD). OK/MEMORY/ENTER (z) activates Instant BACKWARD audio an audio channel To PR/TRK/PRESET RETURN setup source AV3). RDS To tune in the desired radio station. Removes the or bands) SOUND MODE Selects PROGRAM PR/TRK/PRESET(v/V): onscreen. AV2 and AM AUDIO Select programme of VCR or Tuner Adjusts manually the tape's picture TUNING (FM BYPASS, LOGIC, PRO LOGICII (MOVIE, MUSIC, MATRIX) and 3D SURROUND. (left/right/up/down) an choice. PRO Switches among the clock, tape counter tape remaining modes on the display. - Introducin or screen. Selects sound mode between display. and b/B/v/V listening (Tuner, AV1, tuner memory. Accesses On-Screen the Selects the VCR deck's menu. preset stations from the DISPLAY, (CD/DVD source the TV on Select the DVD/VCR Combi receiver's tuner track number Press to clear output to view FM/AM Tuner select button CD/DVD program menu or a mark MARKER SEARCH a (Z) CD/DVD/VCR select buttons VCR) menu. CLEAR EJECT Opens and closes the disc tray. Ejects the tape in the VCR deck. Repeat chapter, track, title, Repeats sequence. Selects recording speed. all. through 30 recording. seconds of Play RANDOM tracks in random order. Note This remote control To use To use use the same buttons for VCR and DVD functions (ex. PLAY). the VCR, first press the VCR button. the DVD, first press the CD/DVD button. 9 Rear Panel AC Power Cord Plug ANT.IN into the power source. Connect the aerial EURO AV2 (VCR IN+OUT/DVD Connect to Set Top this jack. RF. OUT OUT) Box using Connect to a TV with RF cable. or FM ANTENNA CONNECTOR another video recorder. Connect the FM antenna to this terminal. EURO AV1 AUDIO/VIDEO Connect to your TV set (VCR IN+OUT/DVD OUT) another video recorder. or S-VIDEO OUT Connect to a S-Video (DVD OUT) Input on TV. FOR DVD VIEWING ONLY. SPEAKER CONNECTORS Connect the six supplied speakers to these terminals. AM ANTENNA CONNECTORS Connect the AM antenna to this terminal. Do not touch the inner Electrostatic discharge Remote Control of the pins may cause jacks Point the remote control at the remote Angle: remote the rear panel. sensor to the unit. Remote control Operation Range press the buttons. Distance: About 6m remote on permanent damage and battery Detach the installation battery cover on the rear of the remote control, and insert two (20ft) from the front of the AAA AAA R03 sensor (size AAA) batteries aligned correctly. with and About 30° in each direction of the front of the sensor Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 10 Installation and TV & Set Top Box TV & Set (or another VCR Connections) Box Top Setup (or another VCR) A InstaliodSeup D S R E SI SCART INPUT AERIAL Rear of TV ? Make on of the following connections, depending capabilities of your existing equipment. one the Basic connections 1. Tips Depending ? door aerial to ANT.IN on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/VCR Combi receiver. Use one of 2. RF. OUT Receiver S-Video connection Connect the S-VIDEO OUT ed sure directly the DVD/VCR Combi receiver is connectto the TV. Select the correct AV input on using on Do not connect your DVD/VCR Combi receiver to TV via your DVD/VCR Combi receiver. The DVD image could be distorted by the copy protection system. Basic connections the S-Video cable the DVD/VCR jack the TV The signal of S-VIDEO OUT jack will output only when the function mode is selected to CD/DVD. ? When you connect the DVD/VCR Combi receiver to your TV, be sure to turn off the power and unplug both units from the wall outlet before (AV) on (S). Notes ? 1. jack Combi receiver to the S-VIDEO IN your TV. ? supplied RF cable (R) from the jack on the rear panel of DVD+VCR to your television's Aerial Input. make the best connections. Make out- Connect the Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to Caution ? (A) from your indoor/ jack on the rear panel of DVD/VCR Combi receiver. the connections described below. ? (RF) Connect the aerial cable making any connections. Connect the EURO AV1 AUDIO/VIDEO on the panel of the DVD/VCR Combi receiver to the scart input socket on the TV using a SCART lead (E). rear 2. You can VCR) connect such a Set Top Box (or another (D). to the DVD/VCR Combi receiver 11 Progressive Scan (ColorStream pro) connection Connect the EURO AV1 AUDIO/VIDEO socket on the Rear of TV DVD/VCR Combi receiver to the COMPONENT VIDEO INPUT(Y Pb Pr) jacks on (Optional). the TV using the VIDEO INPUT S-VIDEO INPUT SCART to RCA cable COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y If your television is high-definition or "digital ready" television, you may take advantage of the DVD/VCR Combi receiver progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/VCR Combi Pb SCART INPUT Pr a Y(G) Pr(R) Pb(B) receiver. Notes: ? Set the menu ? Progressive Mode to progressive signal, for "On" see on the setup page 24. Once the setting for progressive scan output is image will only be visible on a progressive compatible TV or monitor. If you set Progressive entered, scan an Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. 2) releasing it. The video standard setting visible ? Rear of DVD/VCR Combi receiver Press STOP and hold it for five seconds before on a Progressive output will be restored to the picture will once again be conventional analog TV or monitor. scan video connections and a does not work with the (yellow VIDEO OUT analog jack). Caution: You must set the TV setup to use Output Y Pb Pr Select or RGB option on the signal from the EURO AV1 AUDIO/VIDEO socket. (See 12 menu "TV Output Select" on page 24.) Accessory Audio/Video (A/V) Connections to DVD/VCR Combi receiver Connect the AV3 jacks on the component, using the optional DVD/VCR Combi receiver to the audio/video out jacks on your accessory audio/video cables.. InstaliodSeup PROG./ PRESET Radio Aerial Connections Connect the supplied FM/AM loop aerial aerial for listening to the radio. ? Connect the AM to the AM aerial connector. ? Connect he FM wire aerial to the FM aerial connector. FM Wire aerial AM Loop aerial (supplied) (supplied) Notes ? To prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components. ? Be sure ? After to fully extend the FM wire aerial. connecting the FM wire aerial, keep it as horizontal as possible. 13 Speaker System Connection Connect the the speakers using To obtain the best possible cords. supplied speaker surround sound, the adjust speaker parameters; distance, level, Front Speaker (Right) etc.. Front Centre Speaker (Left) Speaker Subwoofer Rear Speaker (Right Surround) Rear Speaker (Left Surround) Notes ? Be sure to match the reversed, ? If you speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are the sound will be distorted and will lack base. front use speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. ? Do not remove the front cover of supplied speaker. About Ferrite Core Be to attach the ferrite sure (for connecting This ferrite to this core can core speaker a core stopper [a] of the ferrite core a 2 core Wind the Subwoofer cable (A). ferrite 1 unit). 2. Wind the Subwoofer cable three times core cables reduce noises. How to attach the ferrite 1. Push the to the to open. on A B the ferrite once on the Make the (B). as 3. Pass the others straight 4. Close the ferrite core on the ferrite core 3 (B). A until it clicks. Notes ? Take care ferrite ? not to Attach the ferrite comment.). 14 pinch the speaker cables between the cores. core near the unit (Refer to the fig.3 and B short leagth here possible. as Speaker Positioning In the of normal case position the 6 use speakers (2 front centre speakers, speaker, 2 speakers rear and subwoofer). If you want to a ? ? play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect subwoofer. Front speakers According to your listening position set up interval between speakers to 45 degree. Centre speaker speakers The centre and front speakers the speakers the ideally are for distance. And equal same height. But by hearing position normally place it above set up the or InstaliodSeup below the television. ? Rear speakers Place left and behind the right for surround sound position ers and install them at towards In the a of case other, and ? playback. wall a or ceiling smaller set the or rear listening These speakers above the level of the listener's to further room area. recreate sound motion and For best results, do not install the disperse above 60 - 90 ears. atmosphere required listening direct the rear speak- too far behind the It is also effective to the sound. size, if the audience is speakers speakers rear cm near to the rear than the listener's wall set the rear speakers opposite each ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Rear Speaker (Right) Speaker (Left) Speaker Positioning Example 15 Mini Glossary for Audio Stream This unit produce a 3D Surround effect, using 3D technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to lis- & Surround mode Allows you to can Surround Sound discrete channels of enjoy 5.1(or 6) 3D SURROUND ten to multi-channel audio from high audio from DTS program sources such as DVD and compact discs, etc.bearing the trademark. a home theatre. This feature quality digital works with DVD discs encoded with discs, Dolby Digital DTS Digital Surround delivers up to 6 channels of transparaudio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree ent sound field. The term DTS is Technology, Technology, a trademark of DTS LLC. Manufactured under license from DTS The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Use this mode when playing nel which carries the " effect of being effect with DOLBY in which PRO LOGIC can " Dolby Digital 2 chanThis mode provides the or mark. movie theatre a intensity an movie " or live concert house-an only be obtained SURROUND. The through effect of (II) Logic II creates five full-bandwidth nels from two-channel sources. This is done output chan- using according to the way it signals the any spatial properties new sounds or of the original recording extracts without is played recorded. was You can one of the enjoy surround sound simply by selecting pre-programmed sound fields according to the program you want to listen to. Press SOUND MODE repeatedly until the sound display window as mode you want appears in the below. Each time you press SOUND MODE button, the sound mode is changed in the following order; PRO LOGIC → → PL2 MOVIE 3D SURROUND → → PL2 MUSIC → PL2 MATRIX BYPASS When DVD is inserted. You can change the stream of DVD (Dolby Digital, DTS, on the remote dur- ing playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. an advanced, high-purity matrix surround decoder that and BYPASS Software with multichannel surround audio PCM, etc) by pressing the AUDIO button Pro Logic the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynamic than before. Dolby Pro Sound Mode LLC. " Dolby audio tracks. adding tonal colorations. Each time you press AUDIO button, the sound mode of DVD changed as the following order; is →→→ MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. For your reference ? The Music mode is for and provides a with any stereo music recordings, wide and deep sound space. The Music mode use settings ? includes controls that allow the sound to be tailored to individual listening The DVD/VCR Combi receiverr memorizes the last mode MUSIC mode: tastes. for each individually. encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. You can identify source the - MATRIX mode: - The Matrix mode is the same as the Music mode the directional enhancement to enhance mono logic is signals by making except that turned off. It may be used them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals ultimate "cure" for poor FM stereo force the audio to 16 mono. from logic decoder. The reception may be simply to a - Note ? When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). Before in Tuning a Operation-VCR part video channel on your TV Notes ? The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 is used already another TV station, or if the picture is distorted, you can change the transmitter channel of RF by 8 will your DVD/VCR Combi receiver. Stages 5 show you how to change the output frequency of ~ 7. our TV receives signals that you have correctly installed your described earlier in this book. Press POWER to turn receiver. Turn 2. Insert a on on your DVD/VCR Combi Select a TV channel number on which you wish to watch video's. STANDBY/ON on the front of your DVD/VCR Combi receiver when you have finished. Tune this channel so that a bright blue screen appears. Store this channel on your TV. video Notes tape into your DVD/VCR Combi receiver and press PLAY on the a TV channel number on Make which you wish to watch video's. Don't worry if you don't have a video-tape to dedicated video channel on Using your VCR for the very first at this play If you switch your DVD/VCR Combi and continue stages 3 4, instead of stage! receiver on tune your TV until you Tune this channel until the video picture is see sharp and the sound is clear. a your TV. If you do not tune in a dedicated video channel on your TV you will be unable to view and record video tapes! channel. The AV channel is video playback Store this channel on already pre-tuned time Following picture will display on the TV screen when you have just connected your DVD/VCR If you have used a SCART cable you will not have to tune your TV, simply select the AV optimum sure that you have correctly installed your DVD/VCR Combi receiver and successfully tuned in ~ seeing video playback a bright blue screen. 4. 8. your TV. pre-recorded remote control. Select 3. can Press it, usually sure as to select another video channel. also set it to "OFF" if there is any interferwhen your TV is connected to the DVD/VCR Combi receiver with a SCART lead. a called AV. Make - on dedicated video channel built into VCR + or ence your TV and tune it in so that you may watch video tapes. If you have used a SCART cable then your TV should already have a 1. Press PROG. You from the video recorder like another TV station. You have to select (VCR) channel number 36 You may select any channel number between 22 and 68. your DVD/VCR Combi receiver. ?Y CHANNEL PSET R for your TV. your TV. You will need to look at the TV instruction book if on Combi receiverr for the very first time. TV stations, To make tuning 2 to 3 shown "ACMS" as please follow stages (see p.19). you do not know how to do this. 5. Only carry out stages 5 8 if you cannot obtain clear video playback as described in ~ stages 1 4. Select ~ TV channel number a on which you wish to watch video's. Make sure that your DVD/VCR Combi receiver is in standby pressing POWER on the remote control (only 6. the clock will be Press PROG. + or Combi receiver for - A BD CH NN L DK EFI PSS F Pr-12 ACMS displayed). on the front of your DVD/ VCR than 4 seconds. more RF60 will appear in the display window. following picture will be displayed on the TV The screen. 17 Setting the clock To Manually The clock in your DVD/VCR Combi receiver controls time and date settings for your DVD/VCR Combi receiver. 1. Press i. Press 1 or 2 to select TIME DATE. s et the colour system 1. Press i. 2. The main 3. Press 1 or 2 to select the SYSTEM and press OK. 4. Press 3 or 4 to select menu will appear on the TV according screen. to the COLOUR system used. Press OK. HHMMDDMMYY :. - - -- -- -- --- . VCR REC TIME DATE ON OFF 2. Use the numbered buttons to alter the MONTH and 5. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. day 16:9 4:3 OPR the remote control on HOURS, MINUTES, DAY, YEAR. The Dr. fOSD of the week will appear Press 1 or 2 to select the RF AUDIO. Press 3 or 4 to select according to the RF AUDIO used. automatically when you enter the year. VCR fREC HHMNDDMMYY 8 :. 00101 . E Dr. OS ON OF THU TIME DATE 6. 3. If you make a correct details. 4. 18 Press i. mistake press 1 or 2 and enter the Press i to remove the menus from the TV screen. How to the main use This DVD/VCR Combi receiver the programmed by using screen. The menus are Tuning menu easily be displayed on If the TV broadcast can menus controlled from the Remote Control Handset. Switch your TV set and DVD/VCR Combi receiver by pressing the POWER button. 1. in TV Stations on Automatically is weak your DVD/VCR signal Combi receiver may not detect the necessary information and will not be able to store them correctly. To this overcome problem please the MANUAL TUNING section turn to page 20. on Press i button. 2. The main menu will appear on the TV screen. 1. Press POWER to turn your DVD/VCR Combi on receiver. 2. Press i button. The main Press 1 will appear on the TV screen. 2 to select the ACMS. Press OK. menu or VCR PSET R Pr-12 TIME DATE ACMS ON OFF ? Dr. OPR recording setting (see p. 30). 12 Pr-12 PSET R REC PRSET Manual ? 16:9 4:3 REC Timer ? SYSTEM NIC fOSD ON OFF tuning setting (see p. TIME DATE VCR SYSTEM Dr. Pr-12 NIC fOSD 16:9 4:3 OPR 20). ACMS ACMS (Automatic Channel Memory System) (see right column). ? TIME DATE Date & clock ? A setting (see 18). receiver Pr-12 System (see p. 18). 3. a problem with (see p. 42). display the your DVD/CD/VCR operational mode (see p. 42). of your DVD/VCR 16:9/4:3 To select the improve aspect ratio of your TV (see p. 43). the NIC To activate (see p. playback picture (see p. You C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 deactivate the NICAM digital S E Pr-12 or ACMS sound 43). 4. Press i to remove the menus from the TV screen. change the menu language on the DVD setup menu. (See the Menu Language on page 23.) can Press 1 or 2 to select the desired Press OK and press 3 5. 01 27). Tip: 3. 2 to select COUNTRY. OPR To ? or process. Combi receiverr ? Press 1 (A:Austria, B:Belgium, CH:Switzerland, D:Germany, DK:Denmark, E:Spain, F:France, I:Italy, N:Norway, NL:Nertherlands, P:Portugal, S:Sweden, SF:Finland, OTHERS) Press OK again to start the automatic tuning fOSD ON/OFF To ? EFI ACMS Dr. To check ? p. DK PSSF SYSTEM To set the Colour TV ? BD CH NNL Press i to return to a or TV menu. 4 to select. picture. Press i to save your settings. 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 PSET R PR-07 PR-08 MOVE : DELETE : , 19 in TV Stations Tuning In certain areas of the 5. Manually country broadcast signals may The TV station be too weak for your DVD/VCR Combi receiver automatic stations process to find tuning Press 2 to select STATION or assign name list will appear. name correctly. PR CH MFT 09 C10 00 in order for your DVD/VCR Combi manually receiver to store them. 1. that you may TV You must tune in these weaker broadcast stations so your TV station. Press OK. PSET R Press i. The main Press 1 will appear on the TV 2 to select the PR SET. menu or 6. screen. PR CH E to select or station a name from the list. Press OK to select it. Press OK. 01 Press D MFT STATION 00 PR-01 If your station name isn't OK, but go stage 7. to on the list do not press VCR Pr-12 REC ACMS 2. SYSTEM Dr. CHANNEL/CABLE NIC fOSD ON OFF TIME DATE 16:9 4:3 : AV PSET R OPR PR CH MFT 09 C10 00 Press i. PSET R The station table will appear. Press 3 or 4 to select the programme number that you want to tune PR (for example, 7. 09). You can change a TV station name manually using the "standard" names. rather than Press G. PR CH 01 MFT STATION 00 PR-01 Press 3 or the station new Press 1 CHANNEL/CABLE : AV or 4 to select letters and numbers for 2 to name. move back and forth between characters. PSET R Press OK. 3. Press OK. Press AV to select C (Standard stations) or S (Cable stations): C02 - C69, S01 PR C09 - CH STATION MFT C10 00 S41. Enter the channel number of station that you want PSET R to tune with the numbered buttons to find the required Searching 8. 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 will MOVE : DELETE : or new TV station has If you wish to 1 8. stages manually CH C10 a station. 10 11 12 13 14 MFT 15 16 STATION CHANNEL/CABLE PSET R 20 tune other stations - PSET R PR been tuned into your , adjust. 09 now placement. DVD/VCR Combi receiver. stop when it locates 4 to Press i, confirm the station Press i again. Your Press 2 to select MFT. Press 3 4 station. P R SET 4. or use 3 or : AV -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- MOVE : DELETE : , repeat the order of TV Stations Changing After tuning TV stations into your DVD/VCR Combi receiver you may wish to change the order in which they are stored without having to retune them against! The instructions given simply move can 1. this page will show you how you them into your desired order. on After tuning TV stations into your DVD/VCR Combi receiver you may wish to delete a station. The instructions given on this page will show you how easily delete any unwanted TV stations. 1. Press i. Press i. The main The main Press 1 TV Stations Deleting will appear on the TV 2 to select the PR SET. menu or Press 1 screen. will appear on the TV 2 to select the PR SET. menu or screen. Press OK. Press OK. PR CH MFT STATION 00 PR-01 01 PR CH 01 MFT STATION 00 PR-01 VCR Pr-12 REC ACMS SYSTEM ON OFF Dr. CHANNEL/CABLE NIC fOSD ON OFF TIME DATE 16:9 4:3 : Dr. CHANNEL/CABLE : AV PSET R OPR AV Press i. Press 3 SYSTEM NIC 16:9 4:3 PSET R OPR 2. 2. TIME DATE ACMS fOSD VCR Pr-12 REC Press i. Press 3 or 4 to select the programme number you want to delete. 4 to select the programme number you want to move (for example, PR 03). or Press 2. 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 P SET R : : C02 00 02 C03 00 PR-01 PR-02 04 C05 00 PR-04 05 06 C06 C07 00 00 PR-05 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 03) PR-07 PR-08 03 PR-08 MOVE DELETE 01 PR (for example, P SET R 3. : DELETE : , Press 1. After PSET R , MOVE a short while, the selected station will be deleted. 3. Press 3 or 4 to select the programme number move to (for example, PR 05). you want to 01 01 C02 00 PR-01 02 C03 00 PR-02 04 C06 00 PR-04 05 06 C04 C07 00 00 PR-05 PR-06 C02 00 PR-01 07 C08 00 02 C03 00 C09 00 C05 C06 00 PR-02 PR-04 08 03 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 04 PR-07 PR-08 MOVE DELETE P SET R 05 4. P SET R Press i to remove the : : , from the TV menus If you wish to delete other TV stations stages 1 3. screen. repeat - 4. Press OK. The selected programme will be moved to the new programme number. If you wish to move other TV stations repeat stages 1 4. Press i to remove the menus from the TV screen. - 01 C02 00 02 C03 00 PR-02 04 C04 00 PR-04 05 C07 00 PR-05 06 C08 00 PR-06 07 C09 C10 00 00 PR-07 PR-08 08 PR-01 MOVE: DELETE PSET R 01 C02 00 PR-01 02 C03 00 PR-02 03 C05 C06 00 04 00 PR-03 PR-04 06 C07 00 PR-06 07 C08 08 C09 PSET R PR-07 00 How to selecting Stored TV stations : , Stored TV stations: can be selected in either of two PR-08 00 MOVE : DELETE : , ways. Press 3 or 4 to select different stations that are tuned into your DVD/VCR Combi receiver. You may also directly select stations numbered buttons on using the the remote control. 21 Before Operation-DVD part On-Screen You use general playback status on the TV can be changed using the menu. on-screen display: display can the Some items screen. To Display the Press DISPLAY 1. The selected item is Press b / B to 3. an inputting change the title Chapter highlighted. the For number). some also functions, setting. Some discs may not shown below. If no provide all of the features button is pressed for 10 seconds, display disappears. screen Playback TITLE A-B 1/9 b / Number 1/12 the on- b / B,Numbers B,Numbers ENTER 0:20:09 Numbers, ENTER Audio language Digital Audio Output mode b/Bor and Subtitle Notes: ? 1/3 Time search setting. You can appropriate (e.g. press ENTER to execute the ? Title Number ENTER item. the number buttons if use Selection Method Items during playback. Press v / V to select 2. Example: On-Screen Display during playing DVD Video language AUDIO b/Bor 1 ENG ABC S-TITLE Angle b/Bor 1/3 ANGLE Sound 3D SUR b/B Status/Restrictions Example: On-Screen Display during playing VCD Repeat title Repeat sequence Enter Marker MARKER SEARCH 123456789 Selection Method Items Track Number Marker Search Resume Action a play prohibited menu from this or point (or PBC 1/3 b / B,Numbers ENTER mode) Numbers Time search 0:20:09 ENTER not available b/Bor Audio Channel STEREO Sound AUDIO 3D SUR b/B Example: On-Screen Display during playing divx movie disc Selection Method Items Track Number 1/3 b / B,Numbers ENTER Time search 0:20:09 Audio language Digital Audio Output mode Subtitle Sound 22 language b/Bor 1 and MP3 ABC Numbers, ENTER ENG AUDIO b/Bor S-TITLE 3D SUR b/B Initial LANGUAGE Settings LANGUAGE By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 23 to 26. To display display the menu. SETUP will take you back to initial Disc Subtitle Off Disc Menu Original A second press of 2. Use v / V to select the desired alternate Setup menu appears. then press to the second level. The screen shows option the selected item, move a for the language as well as option then Setup menu and Use v / V to select the desired 5. Press SETUP InstaliodSeup on-screen DVD Refers to the recorded. was original language Other: To select another track in which the language, press number corresponding 4-digit language code list in the enter the wrong language code, buttons then ENTER to enter the according chapter. reference to the If you press CLEAR. to the third level. 4. Original: disc number Use v / V to select the second desired press B to Language language you prefer for the audio (disc audio), subtitles, and the disc menu. Press SETUP. The setting for setting(s). Select Select the 1. move Menu Select Disc Audio / Subtitle / Menu Operation the current Move display. To go back to the previous level: Press b on the remote control. 3. Original screen. To go to the next level: Press B on the remote control. B to English Language Disc Audio and exit the Menu: Press SETUP to General Menu setting then press ENTER to confirm your selection. Some items require additional steps. or PLAY to exit the Setup menu. 23 5. DISPLAY TV 16 Aspect Display Mode TV Output Once the Off Select RGB Move On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. Select Press STOP and hold it for five seconds before releas- 2) TV 4:3 : ing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. DVD Aspect Select when a standard 4:3 TV is connected. 16:9 Wide: Select when a 16:9 wide TV is connected. TV Display Display DVD Mode Mode setting only when the TV Aspect LetterBox: Displays a wide picture with bands upper and lower portions of the screen. the entire Automatically displays screen Progressive and cuts off the the wide portions on picture the on that do not fit. Select TV connection Output Select options according to the type. YPbPr: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on this unit. RGB: When your TV is connected with the SCART (RGB signal) jack. AUDIO Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To turn On Output Set this unit TV works mode is set to "4:3". Panscan: Progressive mode. Caution: setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to Widescreen Scan Progressive 9Wide : ENTER will set this unit to Pressing scan DISPLAY progressive Each DVD disc has variety of audio output options. options according to the type of a Set this unit AUDIO audio system you use. AUDIO 5.1 scan: Select Speaker Setup DRC On Vocal On Connect component out of this unit to the input of your monitor/television, set your television or monitor to Component Input. 1. Select "Progressive Scan" on the DISPLAY menu Move then press B. DISPLAY TV 5.1 Aspect Display Select Mode Progressive TV Speaker Setup Output Scan speaker settings, including volume or test the speaker settings. Dynamic Range 2. Select "On" using Move Enter the v / V buttons. 3. Press ENTER to confirm your selection. The confirm menu will appear. Note: If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. 4. When the confirm Cancel is to 24 highlighted highlight Enter. as appears on your screen default. Use the b button Control (DRC) DVD DivX With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume losing clarity of sound. Set DRC to On for this without effect. Vocal menu balance and Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 39.) Off Prev. DVD distance, On Select Select DVD Set to On playing. only when a multi-channel karaoke DVD is The karaoke channels normal stereo sound. on the disc mix into OTHERS DivX(R) The PBC, Auto Play and VOD DivX(R) settings can be changed. VOD DivX You can display the DivX DRM (Digital Rights Management) Registration code for your unit only. OTHERS PBC Auto On DivX(R) DivX(R) Off Play Your Select VOD Video On Demand registration To learn code is more : XXXXXXXX visit www.divx.com/vod Move PBC Set (Done) Select Playback Control (PBC) On: Video CDs with PBC Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an to On or Off. encrypt are played according are played to the PBC. Off: Video CDs with PBC the same way as You If you rent the DivX VOD file, it has several limits as shown below. Display play of watch the file. can player will longest playback time and automatically. On: Auto Play function is active. Off: Auto Play function is not active. VOD Rental Do you want to mode is set to On, this DVD back the title DivX(R) This rental has 3 views left. use one of your 3 views now? search for title that has the then the number which you View set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. Play options DVD can If Auto file. viewing ? Play move Notes: Audio CDs. Auto InstaliodSeup The VCD (Yes) (No) ? The rental has been expired. Notes: The Auto Play function may not work for some DVDs. Rental Expired (Done) ? Display the authorization error. Authorization Error This player is not authorized to play this video. (Done) 25 LOCK (Parental Password Control) You LOCK Rating Unlock Password New Country PL Code (Security Code) enter can 1. Select Password on 2. Follow shown left step "New" is Rating Input Select Some movies contain that may not be suitable of these discs contain scenes Many parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer suitable more scenes as an alternative. to If you new again control feature allows you to block below the rating you input, there scenes by your children from being able to view material you believe is unsuitable. "Rating" 2. Press SETUP to Input on the LOCK menu the must rating a 1-8: tions and 3. from 1 to 8 using Rating one (1) rating eight (8) is using menu. number "210499" and the 6-digit Enter a new code as security described above. DVD Code country/area rating for the player, all disc scenes with rating or lower are played. Higher rated are not played unless an alternate scene is a the disc. The alternative must have the rating or a lower one. If no suitable alternative found, playback stops. You must enter the 4-digit password or change the rating level in order to play is the disc. 4. Press ENTER to confirm your rating press SETUP to exit the menu. selection, then Code" "Country on Follow 3. Select the first character step whose standards on the LOCK menu the then Shift the 2 as cursor shown left (Rating). using v / V buttons. using B button and select using v / V buttons. the second character Press ENTER to confirm your selection. the least restrictive. same Select 2. 5. has the most restric- Notes: 26 Setup clear it press B. the v / V buttons. If you select unlock, parental control is not active and the disc plays in full. on 1. 4. Unlock available the can the Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. scenes Code display Enter the code of the then Rating, Password and Country Code input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so. If you set the same menu. used to rate the DVD video disc, based list in the reference chapter. access Rating or then press ENTER. were features, you 3. Select 4-digit code, verify. forget your Security Country press B. 2. To (Rating). "Change" If you forget your security code you the following steps: 1. then press B. to preventing 1. Select menu code is cleared. parental access as 4. Press SETUP to exit the DVD for children to view. The it 2 the LOCK highlighted. 3. Enter the Move change password. or country code Operation You Playing a You will be able to load and only Tape eject video cassettes when your DVD/VCR Combi receiver is plugged into the mains. Your DVD/VCR Combi receiver may also playback recordings from Getting a better picture When NTSC tapes (on PAL TV). playback started, the tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press 3 or 4 on the remote control or on the front pannal to manually press PROG. + or adjust the tracking until any distortions have been a cassette is inserted and automatic can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) To switch off the slow motion and shuttle, press the desired function. During appear slow motion and shuttle, the noise bars may on the picture according to the status of tape. If distortions can them with D or be 6. Press STOP to end - removed. Press numbered 0 switch automatic on back tracking the remote control to on again. 1. Make sure that you have correctly connected your DVD/VCR Combi receiver as described earlier in this book. Turn your TV. Press POWER to turn on your DVD/VCR Combi receiver. Insert the video cassette on into your DVD/VCR Combi receiver. The video casfacing up and sette should have the window side the arrow facing away from you. 2. Press PLAY to start Your DVD/VCR Combi receiver will to give the best automatically picture quality. 3. Press PAUSE/STEP to still a picture. repeatedly to advance Press PAUSE/STEP If the end of the tape is reached, your DVD/VCR stop playback automatically, rewind, stop, eject the tape. Combi receiver will CM (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then normal playback. While tape is playing press CM SKIP on the remote control to skip commercial (or another programme material). Repeatedly press CM SKIP to skip: resume 3 Press 90 seconds 4 Press 120 seconds 5 Press 150 seconds the OPR (Optimum Picture Response) automatically improves playback picture quality by adjusting your DVD/VCR Combi receiver to This feature the condition of the tape frame by frame. If you press FORWARD, the picture will be slowed 1. Press i. down at about 1/19 times the normal 2. Press 1 can be playback. for up to 5 minutes. After 5 minutes your DVD/VCR Combi receiver will stop the tape to prevent damaging the tape or your Tapes paused DVD/VCR Combi receiver. Still be picture quality improved slightly by pressing 3 or 4. 4. Press PLAY to continue playing or 3. Press OK. can your tape. ON OFF back press either FORWARD or BACKWARD and this will enable you to rapidly During playing tape (7 where you are on the playback) and see rewinding press and hold FORWARD or BACKWARD the picture will be played back at 7 times normal playback speed. During playing back or Shuttle still 3 or 4 12 12 MS VCR TIME DATE SYSTEM Dr. NIC OPR i OPR repeatedly to select: OFF, SOFT or SHARP. playing or playback, 4. Press 16:9 4:3 Please note you may tape. Logic search: During fast forwarding 5. Slow motion OFF SOFT SHARP f times normal tape. 2 to select OPR. Picture search: wind the InstaliodSeup playback. Press EJECT. 6 Press 180 seconds AUTO TRACKING tracking reduce 2 Press 60 seconds If you load a record protection tab removed, playback of the cassette will start automatically. the picture, 1 Press 30 seconds playing your tape. video cassette which has had its adjust in the seen E. a only set OPR when tape. 5. Press i return to screen. : picture press F or G. 27 Instant Timer 5. Recording (ITR) ately for runs out. set a start Recording (ITR) period of time or Your DVD/VCR Combi receiver recording immedi- until the video cassette 6. incorporates Long Play which enables you to record up to twice the amount of time on a video cassette. For example an 180 will record up to 180 minutes using Standard Play LP you will be able to record up to 360 mina LP. 1. Make quality when using slight loss in 7. picture Insert protection will be 3. up and the arrow facing away from you. Press PR v or V to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote control. 4. If you wish to record directly from the SCART sockets repeatedly press AV until the socket you wish to record from is displayed. displayed 8. recording the rear the rear from EURO AV1 SCART socket of your DVD/VCR Combi receiver. AV 2 for recording from EURO AV2 SCART socket on of your DVD/VCR Combi receiver. AV 3 for recording from VIDEO IN and AUDIO IN on the front of your DVD/VCR Combi receiver. (Left 28 & Right) sockets on when Press STOP to end recording. a tape is paused. After 5 recording. Press EJECT. EJECT will appear on the TV screen for a few seconds. Notes: If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video cassette. It is possible to record on a video cassette protection tab removed by covering record with self adhesive AV 1 for unwanted minutes your DVD/VCR Combi receiver will stop recording to prevent damaging the tape or your DVD/VCR Combi receiver. tab into your DVD/VCR Combi receiver. The video cassette should have the window side facing recording pause mode and ITR is cancelled. Tapes can be paused for up to 5 minutes; RECP your VCR. video cassette with a Press PAUSE/STEP to avoid If you press PAUSE/STEP during ITR, this DVD/VCR Combi receiver will enter the record this book. 2. recording. Press PAUSE/STEP to continue that you have correctly connected your DVD/VCR Combi receiver as described earlier in on much scenes. sure Press POWER to turn Press REC/ITR to start sound as press will increase the record time by 30 minutes until you reach a maximum of 9 hours. E- (SP); using and sound or RECORD will appear on the TV screen. Press REC/ITR several times. Each successive (LP) utes. Please note there will be Long Play Play. SP will produce improved picture and quality, however LP will provide twice recording time as SP. Your DVD/VCR Combi receiver allows you to make recordings using a variety of simple methods: Instant Timer Press SPEED if you wish to record in Standard with the the hole tape. Remember you can record one programme while another by starting your instant recording, watching press TV/VCR to appear TV indicator in the display window and then selecting a different channel on your TV. ShowView Programming PR ShowView greatly simplifies entering the date, start and end times of a Timer channel, Recording by simply entering a ShowView Code. ShowView Codes published guide magazines; they can vary numbers in length. SHOWVIEW is are DATE PR-01 12 -- -- -- -- -- -- -- -- -- -- -- -- TIME SP 10 :: 11 11 ~ -- -- -- -- -- -- :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ -- SP -- SP -- SP -- SP -- SP -- SP in most TV one to nine 7. Press D or E to switch VPS/PDC Press G to select the registered trademark Development Corporation. a Press D of Gemstar IP, or or E to select the desired off. tape speed (SP, LP). IP mode determines how much The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation. on or recording speed. tape is left and switches speed from SP to LP, if complete recording the program. necessary, to IP mode is not selected when VPS/PDC is ON. Check that the 1. Make sure that TV channels have been tuned and stored in correct SHOWVIEW order. Insert cassette with protection a timer event details video are correct. If you wish to record from AUDIO IN and VIDEO IN tab into your DVD/VCR on the front either of the EURO SCART sockets Combi receiver. on or from the back of DVD/VCR Combi receiver, press AV to select for display (AV1, AV2 or AV3). correct PR DATE TIME 12 10 :: 111155 PR-01 ~ -- -- -- -- -- -- -- -- SHOWVIEW NO. :: -- -- ~ :: -- -- ~ -- -- -------- -- ONCE 0~9, REC -- -- -- -- -- -- -- -- -- :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ -- -- -- -- SP SP SP SP SP SP 2. Press SHOWVIEW. 3. Press D or E to select the ONCE: To record recording type. once. 8. If you want to make another ShowView repeat stages 2 7. Press i twice. recording - WEEKLY: To record at the same DAILY: To record every day Sunday) at the same time. If PLEASE CHECK is displayed, you have entered incorrect information and will need to re-enter the time every week. and (except Saturday data. wish to record. Press POWER to switch your DVD/VCR Combi receiver power off mode. will appear in the video recorder's display while your DVD/VCR Combi If you make a mistake press F then enter the revised number. To watch 4. Press the numbered buttons to enter the ShowView Code of the TV programme that you receiver waits to make the a DVD during recording. recording standby timer mode, press POWER and DVD to switch to DVD mode. 9. Press STOP to end recording. SHOWVIEW NO. Notes 24687654 ? ONCE 0~9, REC Video Programme System (VPS) Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be recorded exactly from their beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start, or if the programme is extended beyond its scheduled time. Also, if a programme is interrupted, for example, if a news flash is inserted, the recording will also be interrupted automatically and The Video 5. Press OK. If PLEASE CHECK is displayed it means that you have entered the wrong ShowView number, entered the ShowView number incorrectly. If "- -" is displayed, you have to enter the programme number of the station, you want to record from. PR DATE TIME 12 10 :: 111155 SP :: SP -- -- -- -- -- -- -- -- -- -- -- -- ~ -- -- -- -- -- -- -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ -- -- -- -- -- -- resumed when the programme continues. signal is broadcast by the TV station and The VPS SP SP this controls the timer in the video recorder. SP SP VPS should be set ON for all timer SP recordings from broadcasting these signals. It should be set OFF for all timer recordings from TV stations that are not broadcasting these signals. TV stations 6. Press F revise. or G to select the (PR, DATE, TIME, Press D or settings VPS and that you wish to SP). E to enter the correct information. 29 6. Press the numbered buttons to enter the recording using On Screen Display Timer You may set up to seven timer record events within month of the current date. 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by one pressing Note Before setting the timer make sure that you have set the DVD/VCR Combi receiver clock correctly and you know which stations you have tuned TV stations on your DVD/VCR Combi receiver. 1. Insert a video cassette with protection start recording and end times of the programme that you wish to record. Please note your DVD/VCR Combi receiver uses a 3 or 4. DATE PR tab into your TIME 16 PR-01 190020 :: SP ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ SP -- SP -- SP -- SP -- SP -- SP -- DVD/VCR Combi receiver. The video cassette should have the window side facing up and the facing arrow away from you. 7.Press3 or4toswitchVPSonoroff. Press 2 to select the 2. Press i. Press 1 or Press 2 to select REC. 3 or 4 recording speed. tape speed (SP, IP, to select the desired IP mode determines how much Press OK. 3. Press OK to start switches speed from SP to LP, if complete recording the program. the timer record event. setting If all timer record events are full press 3 or 4 to select the event that you wish to remove and replace. Press 1 to delete the event. PR -- -- DATE -- -- :: -- -- -- -- ~ PR :: -- -- ~ :: -- -- -- ~ -- -- -- -- -- -- -- -- -- -- -- :: -- -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ DATE TIME 16 19002000 :: PR-01 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -- -- -- ~ :: -- -- ~ :: -- -- ~ :: SP -- -- ~ :: SP -- -- ~ :: SP -- necessary, to IP mode is not ~ -- SP -- -- -- ~ -- -- -- -- -- -- SP SP SP SP SP SP SP -- SP -- SP -- 8. Check that the timer event details example Stations 3 Channels by pressing 3 - You may also select Once selected press 2. Press POWER to switch your DVD/VCR Combi will appear in the display winStandby. 03. or receiver 4. dow while your DVD/VCR Combi receiver waits to make the recording. To watch a DVD during timer If you wish to record from AUDIO IN (L/R) and VIDEO IN on the front or from the EURO SCART sockets on for correct the back of your unit, press AV to select AV2 or AV3). display (AV1, PR DATE TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ -- -- -- -- -- -- -- recording standby mode, 9. Press STOP to end SP ? SP SP SP SP SP features. Press 1 select, then press OK change. Press 1 to delete the event...or SU~SATo record at the DATE PR-01 30 same -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ :: -- -- ~ -- -- -- -- -- -- SP SP SP SP SP SP SP SUMOTUWETHFRSA -- 2 to -- :: -- -- ~ -- Saturday and time every week. TIME -- -- or Press OK to change; then press 1 or 2 to select; Station, Date, Start and End times and LP. Press or 4 3 to enter the correct information. to confirm. DLY To record every day (except Sunday) at the same time. PR recording. Notes If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press 3 or 4 to select the event that you wish to delete or SP the programme. If you press OK before entering the date you may select one of the following recording press POWER and DVD to switch to DVD mode. 5. Press the numbered buttons to enter the date of automated correct. If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. 9, press 0 first, then - the channel number; for are Press i twice. 4. Press the numbered buttons to enter the station that you wish to record. When selecting stations 1 LP). selected when VPS is ON. TIME -- or tape is left and ? If Timer record events Make sure events do not preset times of the timer recording overlap. If they do, the earlier programme will Example: Programme 17:00. Overlap... that the 1 is always be programmed given priority. to start at 16:00 and end at 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.) Programme If Timer record events Overlap... Change (Deleting) Do not overlap programmes, since overlapping porconflicting programmes will not be recorded. Earlier recording times have priority over later recording times as shown in the diagram. tions of the the Timer Programme If at a later date you wish to delete or change any of settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press D the E to select the event that you wish to delete change. Press F to delete the event...or or Example: Programme 1 will be recorded in its the last 30 minutes of Programme entirety, but only 2 will be recorded. Press OK to change, then press F or G to or select; Station, Date, Start and End times and LP. Press D or E to enter the correct information. PROGRAMME 1 17:00 16:00 17:30 16:30 PROGRAMME 2 (This portion If two programmed will not be timer recorded.) recordings overlap at midnight 00:00 a.m., programme 2 will not be recorded. 31 Playing DVD a or General Features Video CD Note: Playback Setup Turn 1. on Unless stated otherwise, all the TV and select the video input source connected to the DVD/VCR Combi receiver. Turn 2. the audio system (if applicable) and select Moving to another TITLE Combi receiver. When disc has Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the playback side down. another title. Press DISPLAY while the 3. on input source connected to the DVD/VCR Press OPEN/CLOSE to close the 4. operations starts automatically. If playback tray. Playback does not start, described use the remote control. Some features may also be available on the Setup menu. a stopped then the b / B to move You more than one title, you can move to playback is appropriate number (0-9) or use to another title. play any title by inputting playback is stopped. can its number while press PLAY. In some cases, the disc menu might appear Moving to another CHAPTER/TRACK When title instead: Use the bBvVbuttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE or DISC MENU to return to the menu screen. a disc has er on a more disc has than chapter/track as one more than track, you one chapter can move or a to anoth- follows: or > briefly during playback to select chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. ?T o go directly to any chapter during DVD playback, ? Press . the next ? Use the number buttons to select the track you want to view and press RETURN to return to the menu screen. Menu settings and operating procedures may differ. Follow the instructions on the each menu screen. You also may set PBC to Off (See "PBC" on page ? If parental control is set and the disc is not within the rating settings you must input the password. (See "Lock Menu" on page 26.) DVDs may have a region code. Your player does not play discs that have a region code different from player. (two). your ?T o watch a numberoruseb/B. 25). Notes: ? press DISPLAY and press v / V to select the icon. Then, input the chapter/track chapter/track The region code for this DVD during timer player Search 1. The 2. to switch to DVD mode. 3. player > for about two seconds will now go into SEARCH mode. . Press and hold . or > repeatedly to select required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). To exit SEARCH mode, press PLAY. Changing the Audio Channel Press AUDIO repeatedly during playback to hear (Stereo, Left, or Right). ferent audio channel 32 or the is 2 recording standby mode, press POWER and DVD Press and hold . during playback. a dif- Still Picture and Frame-by-Frame Playback Repeat You Press PAUSE/STEP 1. the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. on Press PAUSE/STEP now go into PAUSE mode. Press . 2. The > or during pause. or > to select the t 1/16, t 1/8, t 1/4 or t 1/2 T 1/16, T 1/8, T 1/4 or T 1/2 required speed: (backward), or (forward). ? Title: current title. ? Off repeats the does not : ? Track ? All - play repeatedly. Repeat Track/All/Off repeats the current track repeats all the tracks on a disc. : Off On : does not : play repeatedly. a Video CD with PBC, you must set PBC to Off setup menu to use the repeat function (See the on "PBC" on page 25). If you press > once during Repeat Chapter playback, the repeat playback cancels. ? To exit Slow Motion mode, press PLAY. 3. the current Notes: ? Use the . Repeat Chapter/Title/Off chapter. Chapter: repeats ? will enter SLOW mode. player - ? Video CDs (X) during playback. The DVD/VCR Combi receiver will title/chapter/all/track on a disc. during playback to select a desired DVD Video Discs Slow Motion 1. a repeat mode. To exit still motion mode, press PLAY. 2. play can Press REPEAT (Track) Note: Slow motion playback in reverse is not with possible Video CDs and DivX Discs. 3D Surround To produce a 3D surround effect that simulates multi- channel audio from two stereo Random audio Press RANDOM 1. The unit during playback or in stop mode. automatically begins random playback and RANDOM appears Press RANDOM 2. again on the TV screen. 1. 2. 3. By pressing . or > Press DISPLAY Use 3 during Random playback, (track) and resumes the unit selects another title playback. a setup menu to use PBC, You must set PBC to Off the random function (See 4 to select the sound on "PBC" on the will be option. highlighted. Use1or2totoselect"3DSUR". playing at any chosen time Press DISPLAY box shows the page 2. 25). option Time Search 1. Video CD with during playback. To turn off the 3D Surround effect, select "Normal". To start Note: On or The sound to normal. Tip: Random speakers (instead of speakers normally required for multi-channel from a home theater system). the five+ on the disc: The time search during playback. elapsed playing time. Press v / V to select the time clock icon and "-:--:--" appears. Repeat A-B 3. To repeat 1. Press A-B at your chosen appears briefly on the TV 2. a 3. again briefly on repeat sequence begins. Press A-B starting point. again " A * " screen. at your chosen end "A B" appears the required start time in hours, minutes, and right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. sequence. Press A-B Input seconds from left to the TV 4. point. screen Press ENTER to confirm. Playback starts from the selected time. and the to cancel. 33 Zoom Use 1. to zoom the video enlarge Press ZOOM image. during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture. 2. 1600% size → screen fit mode → the can when the contents of DVD discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press DISC image appears on you're playing a DVD movie. Use the bBvVbuttons to zoomed 4. To normal move through repeatedly playback, ? appears menu may appear. press ZOOM the b a menu, the Otherwise, the disc screen. subtitle angles, as camera options, and Disc Menu Press DISC MENU and the disc Press DISC MENU disc, VR disc and movie file. Marker Search Camera To enter If the disc contains Marker a start can playback To enter points. or use Press TITLE to exit. 3. Zoom may not work on some DVDs. Screen fit mode is available for playing the DVD You number selection. Then press offers features such menu spoken language and chapters for the title. Notes: ? on the menu The 2. the CLEAR button. or corresponding highlight your Press TITLE. If the current title has 1. picture. resume the ENTER. Press 3/4 to select between Normal, Enhanced, and Maximum. 3. Input B v V buttons to Title Menu the way the change screen Checking 100% size Screen fit mode: You DVD Features MENU. Each press of the ZOOM button changes the TV screen in the sequence: 100% size → 400% size → Special desired point the TV screen on from up to nine memorized at the the disc. The Marker icon appears to enter up to nine on briefly. Repeat markers. To Recall or Clear 1. During disc search menu a Marked Scene press SEARCH. The marker appears on the screen. playback, Within 10 seconds, press b / B to select number that you want to recall or clear. 3. Press ENTER and marked scene. playback a displayed. Angle recorded at different scenes angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select a desired angle. Note that the number of the current angle appears on the display. Changing 2. is menu to exit. camera marker, press MARKER a again marker starts from the Or, press CLEAR and the marker the Audio Press AUDIO different audio Language repeatedly during playback language or audio track. to hear a With DVD-RW discs recorded in VR mode that have both main and a Bilingual audio channel, you can (L), Bilingual (R), or a mix of Bilingual) by pressing AUDIO. a switch between Main both (Main + number is erased from the list. 4. You on any marker by the marker search menu. can play inputting its number Subtitles Press S-TITLE repeatedly during playback languages. to the see different subtitle Note: ? The subtitle file of the DivX file is smi, ? If there is no information not read in the DivX 34 displayed only srt and sub. file, or " 1 there is " or etc. a code that are can displayed. Playing Audio CD an or MP3/WMA Disc MP3 / WMA disc limited ? The DVD/VCR Combi receiver formatted recordings play can MP3/WMA CD-ROM, CD-R, on or CD-RW ? Audio CD ? Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press or ENTER and playback ? starts. AUDIO CD 0:52:07 Program ? Track2 - - Track4 ? Track5 Track6 They ? PROGRAM Edit system. should have a incorporate an should not contain maximum of 8 letters .mp3 or .wma extension. special letters such as / The total number of files This DVD Press v / V to select folder, and press ENTER a the folder contents. Press v / V to select Playback track then press PLAY a on the disc should be less than 650. MP3 / WMA or player requires discs and recordings to meet certain technical standards in order to achieve Operation optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and starts. these require certain pre-existing conditions (see above) to ensure compatible playback. MUSIC 0:00:00 1/12 List Program 1-Music1 Customers should note that 2-Music2 3-Music3 required 4-Music4 5-Music5 Clear All 7-Music7 PROGRAM Info permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission 6-Music6 DISPLAY ISO 9660 file Clear All Track8 ENTER. an names ?*:"<>letc. Track7 see File and must Track3 2. is Sampling frequency: within 8 48 kHz (MP3), within 32 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 192kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates 1/12 List Track1 to player - ? 1. with this - discs. PLAY compatibility follows: as should Edit always be sought from the copyright owner. Tip: ? If you are in a file list return to the Folder on list, the MUSIC menu the v / V to use and want to and highlight press ENTER. ? Press DISC MENU to ? On ? move to the next page. CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or a PHOTO word on When a playing titles, you top of the file can see menu containing is highlighted. information such the information by pressing as track DISPLAY. 35 Audio CD and MP3 / WMA Disc Random Features 1. Pause 1. 2. Press RANDOM during playback or when playback is stopped. Random Playback begins immediately and RANDOM appears on the menu screen. Press PAUSE/STEP To return to press 2. during playback. playback, press PLAY, PAUSE/STEP again. ENTER To return to normal repeatedly or playback, press RANDOM disappears from the until RANDOM menu screen. Tip: Moving 1. By pressing to another Track Press . > or the next track briefly during playback to go to beginning of the to return to the or current track. 2. Press . twice previous 3. In > during another track and case briefly step back to the of audio CD, to go directly to any track, using the numbered but- playback, the playback. unit selects random A-B 1. To 2. Press A-B track. enter the track number tons to Repeat random resumes repeat a sequence during disc playback press A-B at your chosen starting point. The Repeat icon and "A" appear on the menu screen. again at your chosen end point. The icon and "A-B" appear on the menu screen, and the sequence begins to play Repeat (0-9). repeatedly. Track/All/Off Repeat You 1. 3. can play a track/all on a Press REPEAT when disc. playing a disc. The To exit the sequence and return to normal play, press A-B again. The Repeat icon disappears from the repeat menu screen. icon appears. 2. Press REPEAT to select ? ? ? a desired repeat mode. To Track: repeats the current track All: repeats all the tracks on a disc. Off(No display): does not repeat playback once Track a 3D surround effect that simulates speakers (instead speakers normally required for multi-channel audio from a home theater system). of the five+ play repeatedly. during Repeat produce multi-channel audio from two stereo Note: If you press > 3D Surround playback, the 1. cancels. 2. Press AUDIO on To return to normal playback, press AUDIO disappears from repeatedly Search 1. Press and hold . or > for about two seconds The 2. player will now go into SEARCH mode. Press and hold . or > repeatedly the to select required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated on the menu screen. 3. 36 To exit SEARCH mode, press PLAY. the until "3D SUR." menu screen. during playback. during playback. "3D SUR." appears menu screen. the Repeat Programmed Programmed Playback 1. program 1. can Insert a memory. A 2. contain 30 tracks. disc. Audio CD MUSIC or menu ? Track: ? All: ? Off(No display): If you press > E Erasing Note: Press PROGRAM again, then the Program the mark will E 1. Edit mode. AUDIO CD 2. 0:00:00 Program desired repeat mode. play repeatedly. Track5 Track2 Track7 1-Music1 4-Music4 Track3 Track4 2-Music2 6-Music6 Track4 Track1 3-Music3 1-Music1 3. 2-Music2 Track5 once Track from : playback, the List Program Press PROGRAM in the Program Press B to Track during Repeat stop mode to Edit mode. move to the "Program" list. E Program Track1 Use v/V to select the track that you wish to "Program" list. erase from the 4-Music4 Track6 5-Music5 Track7 4. 6-Music6 Clear All Track8 Clear All 7-Music7 DISPLAY Audio CD Menu PROGRAM Edit Info MP3/WMA Menu Video CD: Press PROGRAM while The program PROGRAM to exit the stopped. playback 1. is 2. Note: Video CD with PBC, you must set PBC to Off the setup menu to use the programmed playback "PBC" on erase additional tracks as Complete Program steps 1-2 of "Erasing a Operation List Track from Program above. complete Program for the disc will be erased. on Note: The programs removed. 25). page to Use 3/4 to select "Clear All", then press ENTER. The a the Follow List" menu. Repeat the list. Erasing appears. Press menu Press CLEAR. on PROGRAM Edit (See repeat 1/12 List E a Video CD enter MUSIC 1/12 List a does not repeat playback cancels. 0:52:07 disc. The repeats the current track repeats all the tracks on programmed list. The to exit a Note: appears. mark will appear to the right of the word "Program" on the right side of the menu screen. On Press REPEAT to select Press PROGRAM. disappear playing MP3/WMA Discs: or AUDIO CD 2. player Press REPEAT when icon appears. The program function enables you to store your favorite tracks from any disc in the Tracks are also cleared when the disc is VIDEO CD List E Program Track1 Track5 Track2 Track2 Track3 Track3 Track4 Track1 Track5 Clear All Video CD Menu 3. Select a track on the "List", then press ENTER to place the selected track on the "Program" list. Repeat to place additional tracks on the list. 4. Press B. Select the track you want to start "Program" list. 5. Press PLAY or ENTER to start. playing on the Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the list have "Program" 6. To resume playback, normal select a played once. playback from track of CD programmed (or MP3/WMA) list and then press PLAY. 37 Viewing JPEG Disc a Moving Press . this DVD/VCR Combi receiver you can view Kodak PICTURE CDs and discs with JPEG files. Using 1. Insert disc and close the a the TV on appears tray. The PHOTO or > during viewing a picture to the previous file. once advance to the next file menu JPEG to another File to or JPEG Zoom screen. Use (see PHOTO the to enlarge page) zoom 34 photo image. Preview List To rotate JPEG Folder 1 JPEG Folder 2 picture >>> JPEG Folder 3 Press v / V JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 picture JPEG Folder 7 during showing clockwise or a to rotate the picture counter clockwise. JPEG Folder 8 To listen to MP3/WMA music watching picture JPEG 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, the v / V buttons use the remote to Viewing the file proceeding starts. While viewing a file, you can press STOP to the previous menu (PHOTO menu). Slide Show 1. move or PLAY. to move files while on listening the same containing to MP3/WMA disc. the two types of file in player. 2. Press TITLE to 3. Press v / V to select 4. Use B / V to select Playback STOP is to the next page. display starts. The a PHOTO photo menu. file. icon then press ENTER. will continue until playback pressed. Tip: JPEG Use vVbBto display Insert the disc the If you want to view a particular file, press v / V to highlight a file and press ENTER Press DISC MENU to can music files recorded and press ENTER. highlight 3. on You To listen to highlight the (Slide Show) then press ENTER. only the desired music watching picture, programmed the desired tracks from the "MUSIC" menu and then proceed as above. Tip: ? There are (Normal) ? three Slide and Speed options (Slow). : >>> (Fast), >> On a disc with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word ? > Press on RETURN, top of the menu is JPEG disc limited ? compatibility with this player is follows: as Depending upon the size and number of JPEG a long time for the DVD player files, it could take highlighted. to read the disc's contents. If you don't see an on- after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x screen information of file is hidden. display --- Still Picture 1. 2048 Press PAUSE/STEP The 2. JPEG player will now during slide show. ? go into PAUSE mode. To return to the slide show, press PLAY PAUSE/STEP again. or pixels and burn another disc. The total number of files and folders press ? the disc Some discs may be incompatible due to a recording format or the condition of disc. different ? Ensure that all the selected files have the extensions when ? If the files have rename ? File them names the files are Windows copying into the CD ".jpg" layout. ".jpe" or ".jpeg" extensions, please ".jpg" file. as without able to be read 38 on should be less than 650. by shown Explorer. ".jpg" extension will not be this DVD as JPEG player. image Even though files in 5.1 Speaker Setup This If you connected to chapter includes important reference information help you set your DVD/VCR Combi receiver. receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set lisThis allows the sound from each speaker to reach the listener at the following settings for the built-in 5.1 channel surround decoder. Press SETUP. The 2. Use v / V to select the AUDIO 3. setup menu Use v / V to select the press B to move option then press Speaker Setup option to the third level. "Select" is time. 6.0(20)m(ft)] Test then high- Speaker Setup signals of each the volume to match the volume of test rized in the Front Left → Press ENTER and 5.1 same the Distance of the selected Press b / B to test the lighted. 4. - adjust appears. to the second level. move Press b / B to speaker. [0.3(1)m(ft) 1. B to to your DVD/VCR Combi tening point. Speaker Setup Make the speakers speaker. Adjust signals memo- system. (L) Rear Left → (R) Center → Front Right (R) Right (L) → SubWoofer → Rear menu appears. AUDIO Speaker Size Volume Distance Test Operation Front L Large dB 0 m(ft) 0.6(2) Off Select Move Return 5. Use b / B to select the desired 6. Adjust options using 7. Press RETURN to return to the Speaker Select Enter speaker. v / V / b / B buttons. menu screen. selection speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) a Note: Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the change speaker settings settings. are fixed, you cannot the Volume Press b / B to speaker. (-6dB adjust the output 6dB) level of the selected ~ Distance 39 Maintenance and Service DVD VR format Disc Playing a This unit will play DVD-R/RW discs recorded using using the DVD-Video format that have been finalized a ? This unit will play DVD-RW discs recorded using Recording (VR) format. Insert a menu appears disc and close the on the TV tray. The TITLE LIST When shipping Please ? ENTER and playback Press TITLE to move a track then press PLAY or starts. to the list menu. original shipping carton and packing the exterior surfaces clean Do not use near volatile liquids such as insecticide the unit. Do not leave rubber or plastic products in contact long period of time. since they with the unit for a leave marks the surface. on the unit Cleaning To clean the Note: Unfinalized DVD-R/RW discs cannot be played surfaces in this player, use a soft, dry cloth. If the extremely dirty, use a soft cloth lightly with a mild detergent solution. are moistened player. ? the unit factory. spray Press v / V to select the save Keeping ? ? before the Unit Handling at the 3. chapter service technician. materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed screen. DVD-VR 2. a DVD-recorder. the Video 1. Refer to the information in this contacting Some DVD-VR disc RECORDER. Player are made with CPRM data does not by DVD support these kinds of Do not or discs. use thinner, strong solvents such as these as might damage alcohol, benzine, the surface of the unit. What is 'CPRM'? CPRM is a copy protection system (with scramble system) the recording of 'copy once' broadcast only allowing programs. CPRM stands for Content Protection for Recordable Media. This play is CPRM compatible, which means that you can mode, players that are only recordings specifically compatible can be played on with CPRM. the Unit The DVD/VCR Combi receiver is precision record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR and CPRM Maintaining drive device. If the parts are or disc could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of For details, please service center. 40 dirty a high-tech, optical pick-up lens and worn, the picture quality use. contact your nearest authorized Playing a DivX Movie Disc DivX disc as this DVD/VCR Combi receiver you Using can compatibility is limited ?A vailable resolution size of the DivX file is under 720x576 Insert player play DivX disc. 1. with this follows: a appears disc and close the on the TV tray. The MOVIE menu ? screen. The file (W x name H) pixel. of the DivX subtitle is available by 56 characters. MOVIE 0:00:00 ? List Movie Folder 1 If there is code to express in the DivX as mark on the impossible " file, it may be displayed Movie Folder 2 Movie Folder 3 " _ display. Movie Folder 4 Movie Folder 5 Movie Folder 6 ? Movie Folder 7 If the number of the frame is screen over 30 Movie Folder 8 second, this unit may normally. per 1 Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the 2. v / V buttons on the remote to highlight particular file, press file and press ENTER or PLAY. Press DISC MENU to ? On is highlighted. encoders, like DivX There are called 1-point, 2-point, or or Operation Xvid, have this option. different levels of GMC 3-point encoding, usually GMC. to the next page. MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu a CD with move audio is GMC? Tip: ? or GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 Press STOP to exit. 4. video If the file is recorded with GMC, the unit supports only 1-point of the record level. * a a interleaved, either outputted. ? If you want to view v / V to operate If the video and audio structure of recorded file is not and highlight press ENTER. 3. ? not Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 8 48 kHz (MP3), ? - within 32 ? 48kHz (WMA) 320kbps (MP3), 192kbps (WMA) - Bit rate: within 8 32 - - 41 Additional Features-VCR part On Screen You may Video Doctor Display easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will appear on the TV screen. If a recording is taking place these On Screen onto the Displays (Self-Diagnosis) This feature informs you that there is a problem with your DVD/VCR Combi receiver. These error mes- sages will appear 1. will not be recorded the TV screen. Press i. Press 1 tape. on or 2 to select Dr. Press OK. Press CLK/CNT to 1. display. repeatedly Press CLK/CNT to VIDEO DOCTOR the cycle through HEAD STATUS The tape counter and amount of tape left will appear if there is a tape loaded. display options. TAPE STATUS NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME PSET R REC Pr-12 ACMS TIME DATE NIC fOSD 2. After 3 seconds the Displays will clear majority of the leaving only the counter and the amount of Press CLK/CNT the TV again to clock tape left remove ON OFF On Screen on all or the tape screen. displays 2. SYSTEM 16:9 4:3 OK OPR Press 3 or 4 to check a problem. HEAD STATUS from O screen. PLEASE CLEAN: Clean your video heads. TAPE STATUS Tape Counter Memory Stop The O Insert displayed on the the time by pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings Digital Tape Counter display window instead of on 1. the can be Shows the number of timer Press PLAY or start counter recording. will display the 3. actual play Press STOP when playback or recording time is complete. Press BACKWARD. tape will rewind and automatically stop when the counter returns to 0:00:00. 42 PR-01 26 10:00~11:00SP Shows the current status of timer in hours, minutes and seconds. The recording. NEXT TIMER PROGRAMME O Press CLEAR to set the counter to 0:00:00. 2. tape with its protection tab in place NO. OF TIMER PROGRAMME Press CLK/CNT. tape a O2 tape. The NOT RECORDABLE: Press i recording. Hi-Fi Stereo Sound Wide Screen System Your DVD/VCR Combi receiver will record and back Hi-Fi stereo sound. In addition it has NICAM play- stereo stereo sound decoder. This allows you digital to record and a playback the sound in several different ways. Video cassettes recorded on your DVD/VCR Combi receiver will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo Your DVD/VCR Combi receiver back wide record 1. system, video disc or screen wide a the correct cast 1. by can 16:9 record and play aspect ratio programmes (16:9). To screen format programme type of wide signal screen successfully must be broad- the TV station. Switch your VCR. on Press i. tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio Compatibility Press F or G to select 16:9/4:3. Press OK. another Hi-Fi VCR. Your DVD/VCR Combi receiver's NICAM digital sound decoder allows you to enjoy broadcasts with NICAM sound, as well as standard stereo, bilingual and played or the TV on sound. The mono sound received particular type of briefly discouple of seconds: screen for a STEREO NICAM Sound is stereo and mono on tracks of the video ON OFF the Hi-Fi tape. stereo tracks. The will be recorded primary language on the on (left) 2. on track of the video Press AUDIO OPR Press D or E repeatedly Pr-12 Dr. ACMS OPR to select: AUTO, 4:3 or back Wide-Screen as Wide-Screen and Normal as normal. Only for playing back recordings (4:3). the Hi-Fi tracks and the and recording Normal format 16:9: tape without any separation. repeatedly PSET R ON OFF 4:3 MONO mono REC Dr. fOSD programmes programmes tape. The sound is recorded SYSTEM NIC Automatically plays the Hi-Fi channel TIME DATE AUTO: track of the video mono ACMS 16:9. BIL NICAM Both audio channels will be recorded Pr-12 PSET R fOSD 2. recorded automatically VCR VCR REC that recorded will be Only for format until the desired audio playing back and recording recordings (16:9). Wide-Screen mode appears. 3. The choice is STEREO, LEFT, RIGHT and MONO. In BIL NICAM playback the primary lan- guage is output onthe left channel and the secondary channel is output simultaneously from the right channel when audio output is set to VCR Pr-12 REC PSET R ACMS Dr. fOSD ON OFF OPR STEREO. The primary language willbe output from both channels when the audio is MONO. Please note that when the setting adjusting tracking control Hi-Fi stereo sound may revert to MONO. 3. Press i to To remove the Wide-Screen menus from the TV screen. you must connect your DVD/VCR Combi receiver to the TV using a SCART cable. enjoy playback 43 Additional Features Last Scene Memory This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the If you load scene is player. memorized, the a disc that has the scene recalled. automatically Note: This player does not memorize the switch off the player before scene commencing of to a disc if you the disc. play Screen Saver The appears when you leave the DVD mode for about five minutes. screen saver in player Stop Video Mode Setting With certain discs, the playback flickering or Dot Crawl is shown That means Vertical picture may be straight lines. interpolation or De-interlace is on perfectly matched with the disc. In this case, the picture quality may be improved by changing the not video mode. To change the video mode, press and hold during disc playback. DISPLAY about 3 seconds The on new video mode number selected is the TV has until screen. displayed quality procedure Check whether the video improved. If not, repeat the picture quality is improved. Video mode sequence: MODE1 → MODE2 → MODE3 above → MODE1 If you turn off the power, the video mode will return to initial default state Detailed MODE1 al or : MODE2 : Description The video (MODE1). source material) of each Video Mode material of the DVD video (film materi- is determined from disc information. Suitable for playing film based content or video by the progressive scan method. based material recorded MODE3 : Suitable for comparatively playing video based content with little motion. Note: The video mode Progressive menu. 44 setting only works when the Scan mode is set to "On" on the setup from DVD To VCR Copying Recording This unit allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. Notes: Be sure setup to set Scan" to "Off" "Progressive on the recorder With this video recorder you can make recordings from an external source, such as copying from another DVD/VCR Combi receiver protected, are attempting to copy is copy you may not be able to copy the disc. 3. camcorder. Note: In the one 2. or a menu. If the DVD you 1. from another video following description, recording and used for DVD/VCR Combi receiver B. The other Insert Disc Insert the disc you wish to copy in the DVD deck and close the disc tray. be used for Insert VHS Tape Insert a blank VHS 1. Copy videotape the DVD to VHS into the VCR deck. Tape will as DVD/VCR Combi receiver A should be connected or on the AV sockets on the rear panel of your panel of your the front unit. appears, you may need button manually to begin menu Play and will be referred to to the SCART socket unit The DVD will go into Play mode and the DVD/VCR Combi receiver will go into Record mode. If the DVD disc playback as appliance DVD/VCR Combi receiver A. Press the REC/ITR button. to press the this video recorder will be will be referred to 2. Insert the recorded receiver A and a tape into DVD/CD/VCR tape into DVD/VCR Combi blank receiver B. 3. Press AV until the socket you wish to record from displayed. (DVD/VCR Combi receiver B) is copying. AV 1 for If you press the REC/ITR button, be sure this DVD/VCR Combi receiver in DVD mode. the Copy Process When the DVD is finished playing, press STOP to 4. the rear stop the Copy process manually when the DVD movie ends, or the unit may and over again. of your unit. & recording from VIDEO IN Right) sockets on the front and AUDIO IN of your unit. To start recording, press the REC/ITR on DVD/VCR Combi receiver B and PLAY on DVD/VCR Combi receiver A. You must over on (Left end the copy. and record rear AV 3 for Stop replay the from EURO AV1 SCART socket of your unit. AV 2 for recording from EURO AV2 SCART socket Note: 4. recording on 5. When you want to finish copying, press the STOP on both DVD/VCR Combi receiver. 45 the Radio Stations Presetting You can tuning, preset make 50 stations for FM and AM. Before sure Preset radio stations in the DVD/VCR Combi receiver that you have turned down the vol- Press FM/AM the remote control on front on memory first (see "Presetting radio stations" on the left). ume. 1. to the Radio Listening panel until the frequency the display and TV screen. or on the 1. band appears Press FM/AM the remote control on front on panel until the frequency the display and TV screen. or on the band appears The last received station is tuned in. 2. Press 3/4 on the remote control repeatedly to select the preset station you want. Each time you press the button, the DVD/VCR Combi RADIO AM 3. OK, CLEAR , 2. receiver tunes in 01 522kHZ Press 3/4 on one preset station at a time. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. - the remote control to select your desired radio channel. To Clear the Stored Radio Stations 1. RADIO FM Press FM/AM 108. 00MHZ on Press FM/AM front 4. panel until the frequency the display and TV screen. or on the band appears OK, CLEAR , 3. the remote control on front 06 panel Hold down on the remote control 4 PRESET hold down 1 and 2 2 seconds, automatically. or or on the to select the desired band. and 3 on a on the front panel or RADIO the remote control for 1 FM station is searched for OK, CLEAR , 2. 06 108. 00MHZ Press 3/4 on the remote control to select your desired station. RADIO FM 06 87. 50MHZ , OK, CLEAR RADIO AM 5. Press MEMORY on the remote control. , 3. 10 522kHZ OK, CLEAR Press CLEAR the remote control to clear the stored radio station. 6. Repeat steps 2 to 5 to store other stations. RADIO FM 10 98. 00MHZ , OK, CLEAR Note While record or record pause mode, the CLEAR function may not be 46 operated. Tuning 1. into a Press FM/AM Station on Manually the remote control front on 2. panel until the frequency the display and TV screen. Press FM/AM front 3. panel Press 4 on RDS or on the the remote control PRESET 3 the on the front panel or hold in the desired station. Tuning into Hold down 4 a PRESET hold down 1 and 2 seconds, and automatically. 2 a RDS Station 3 on on Automatically the front panel call or stop station with a very and the RDS indicator will as well as (PS) Mute telephone, display. appear in the name. example, to MUTING and MUTE indicator light in the Display indicators for the RDS services if transmitted by the station. Display system is capable of transmitting wide a of information in addition to the initial call that appears when RDS operation the the system for FM station is tuned in and it contains RDS The RDS variety Press MUTE to mute your unit. You can mute your unit in order, for answer sign Window RDS a a programme Note at a data, the unit will automatically display the station's station is searched for The search may not weak signal. in many countries, RDS is Tuning When or the remote control for 1 use transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musical selection and the correct time. the remote control to tune on equipped with RDS (Radio Data System), brings a wide range of information to FM radio. Now in or on to select the desired band. down 1 and 2 This unit is which band appears Operation Pressing a display RDS sign station is first tuned. In normal on you to show the station will indicate the station the remote control enables name. Note If the RDS services programme (PS) is not transmitted, the Display Window will show NONE being a PS message. 47 Language Codes Use this list to input your desired language for the Disc Audio, Disc Subtitle, Disc Menu. initial settings: Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Country Choose a 8373 8471 8479 Codes country code from this list. Country Afghanistan Argentina Code Code Country Malaysia Code ET MY Saudi Arabia SA FJ Maldives MV SN AR Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU AF Country Code Country Ethiopia Fiji SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY Czech 48 following Republic UG Denmark DK Japan Kenya Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG LY Romania RO Vietnam VN El Salvador SV Libya Luxembourg LU Russian Federation RU Zimbabwe ZW Check the following guide for the possible cause of a problem before Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD/VCR Combi No disc is inserted. Insert No disc Plug the power securely. tape is inserted. picture. disc or tape. (Check that the tape indicator in the display The TV is not set to receive DVD/VCR Select the Combi receiver on signal output. cord into the wall outlet a or window is receiver does not work. No service. contacting the TV lit.) appropriate video input the picture from the mode so DVD/VCR Combi receiver appears the TV screen. TV/VCR mode for DVD/VCR Combi receiver is set to TV. on Press the TV/VCR button on the remote control repeatedly to choose VCR mode. TV indicator disappears in the display window. The video cable is not connected Connect the video cable securely. securely. No sound. The connected TV power is turned off. Turn The cable is not set to receive DVD/VCR Select the correct input mode on the audio receiver so you can listen to the sound from Combi receiver the DVD/VCR Combi receiver. connected with the audio equipment signal output. The audio cables are not connected on the TV. Connect the audio cables securely. securely. The power of the equipment connected with the audio cables is turned off. The digital audio output position. is set to the wrong The playback picture is poor. The disc is Tape heads Tape is a rental receiver does not start playback. the digital audio output to the position, then turn on the DVD/VCR Combi receiver again by pressing POWER. Clean video heads. dirty. or was recorded on Use (v/V) for manual tracking adjustment while tape is playing. Insert No disc tape is inserted. disc or tape. (Check that the tape indicator in the display a or window is unplayable connected with Set the No disc is inserted. An equipment Clean the disc. another DVD/VCR Combi receiver. The DVD/VCR Combi on the audio cables. correct dirty. are Turn Insert disc is inserted. a lit.) playable disc. (Check the disc type, color system, and Regional code.) The disc is placed upside The disc is not placed Place the disc with the down. within the guide. Place the disc inside the dirty. Clean the disc. The level is set. Cancel the rating the disc side down. tray correctly guide. The disc is Rating on playback Rating function or change the level. Video Head Cleaning Whenever a video cassette is inserted into or ejected from your DVD/VCR Combi receiver the video head is automatically cleaned. This should mean that additional head cleaning should not be necessary. However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. 49 Cause Symptom This remote control The remote control is not the same buttons for VCR and remote uses sensor Correction pointed at the Point the remote control at the remote of the DVD/VCR Combi receiver. The remote control is too far from the DVD functions There is an obstacle in the path the remote control within 23 ft Operate (7 m). DVD/VCR Combi receiver. (ex. PLAY). of the DVD/VCR Combi receiver. sensor of the remote Remove the obstacle. control and the DVD/VCR Combi receiver. The batteries in the remote control the batteries with Replace are new ones. exhausted. This remote control The tape does not the uses When same using a VCR, first press the VCR a DVD, first press buttons for VCR and DVD functions button. When (ex. PLAY). the CD/DVD button. using The DVD/VCR Combi receiver is in the Press PAUSE/STEP during recording. RECORD PAUSE MODE. recording. The The or tape will run not rewind fast-forward. The tape is already fully rewound playback picture resume or fast- Check the the RF cable for con- Set the TV to the Video channel tape. If you're using only nection. (see Noise appears visual search. This is normal. Turn camcorder during p. 17). on and operate properly. Noise appears during normal playback. The automatic Breaks There is The automatic noticeable in Hi-Fi soundtrack. Recording to forwarded. does not appear while the tape is running. are (X) no tracking tracking cannot be The engaged. engaged. Try manual tracking (see p. 27). tape loaded Try manual tracking (see p. 27). mode is tape loaded, has had its record started. mode is safety or the tab removed. (another VCR, camcorder) properly connected. source not been has Insert a cover the hole where the tab tape, or using adhesive tape, was removed. Tape-to-tape editing not possible. Timer recording is won't The clock/or the timer have been set Confirm that the camcorder is incorrectly. connected. The timer is not work. Re-perform tings. engaged. properly the clock and/or timer set- Press POWER and confirm that the The loaded timer indicator is tape has had its record safety displayed on tab removed. DVD/VCR Combi receiver's Insert a Audio mode is not set insert a properly. the Display. pate with adhesive tape, or tape with the record safety tab intact. Select "STEREO" No Hi-Fi sound. ing AUDIO on by repeatedly pressthe remote control. Moisture Condensation Moisture condensation can occur: ?W hen the DVD/VCR Combi receiver is moved from a ? cold Under place to a warm extremely In locations where moisture condensation may ? Keep the plugged into an AC help prevent conden- power outlet with POWER On. This will sation. place. humid conditions. ? When condensation has occurred, wait a few hours for the DVD/VCR Combi receiver to dry before using it. 50 DVD/VCR Combi receiver occur: General Power Refer to main label Power Refer to main label requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature RF-Modulator 430X81X360mm(wxhxd) 5.8 kg (17.6 lbs) 5˚C to 40˚C (41˚F to 104˚F) 24-hour display type UHF 22-68 (adjustable) Operating humidity 5%to90% Timer DVD Section Laser Semiconductor laser, Signal system Frequency response PAL/NTSC wavelength 650 nm DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto20kHz CD:8Hzto20kHz Signal-to-noise ratio More than 65 dB Harmonic distortion Less than 1.0% Dynamic Outputs More than 60 dB range S-VIDEO OUT (Y) (C) 1.0 V (analog out connectors (DVD, CD) (p-p), 75 ohms, negative (p-p) 75 ohms 0.3 V only) sync, Mini DIN 4-pin x 1 VCR Section Head 6 heads helical system Television system Recording format scan PAL/SECAM colour azimuth system system PAL/MESECAM RF OUT K PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP) Tape speed NTSC (Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP), (EP) SP: 4 h (E-240 tape), LP: 8 h (E-240 tape) About 180 min (E-180 tape) VIDEO: 1.0 V(p-p), 75 ohms, unbalanced AUDIO: -6.0 dBm, more than 10 kohms (SCART) -6.0 dBm, more than 47 kohms (RCA) VIDEO: 1.0 V(p-p), 75 ohms, unbalanced 11.12 mm/s Maximum recording time Rewind time Input level Output level Signal-to-noise ratio VIDEO: More than 43 dB AUDIO: More than 72 dB More than 42 dB Dynamic range (Hi-Fi) (Mono) AUDIO: More than 85 dB Tuner Section Tuning FM: 87.5 range AM: 522 Intermediate frequency - - 108.0 MHz 1611 kHz FM: 10.7 MHz AM: 450 kHz Amplifier Section Stereo mode Surround mode 25W+25W(6ohmat1kHz,THD10%) Front: 25W + 25W (THD 10%) Centre: 25W Surround: 25W + Subwoofer: 60W 25W (8 (6 ohm at 1 kHz, THD ohm at 30 Hz, THD 10%) 10%) 51 eaker Section Satellite (LHS-CX245T) Type Impedance Frequency Response 1 1 Way Speaker 6Ω 130 20,000 Hz - Sound Pressure Level 85 dB/W Rated 25W Input Power Max Input Power Net Dimensions (W Net Weight (1m) 50W x H x 90x138.5x100mm D) 0.89 kg Passive Subwoofer (LHS-CX245W) Type Impedance Frequency Response 50 Sound Pressure Level 82 dB/W Rated 60W Input Power Max Input Power Net Dimensions (W Net Weight 1 1 Way Speaker 8Ω 1,500 Hz - (1m) 120W x H x 160x350x345mm D) 4.5 kg Accessories: AM/FM antenna, Design and Speaker cable specifications are Manufactured under license from x 5, Scart cable subject Dolby to x change Laboratories. 1, Remote control 52 Digital Out" are trademarks of Digital 1, Batteries (AAA) x 2 without notice. "Dolby", "Pro Logic" Laboratories. "DTS" and "DTS x Theater Systems, Inc. and the double-D symbol are trademarks of Dolby P/N: 3835RH0054M
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project