LG V9342QP1M, VCX9300 User manual

LG V9342QP1M, VCX9300 User manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
VCX9300
PAL
Before
adjusting this product,
booklet carefully and
connecting, operating
please read
completely.
this instruction
or
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFI-
CAUTION
NITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
RISK OF ELECTRIC SHOCK
DO NOT OPEN
BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
MENDED THAT THE USER SWITCH THE CONNECTION
TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL
of this unit. This number is
here and retain this
Model No.
Serial No.
This product is manufactured to comply with the
radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
Notes
copyrights:
on
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
2
information
permanent record of your
of your old
appliance
notes on
controlling
this
unit
This unit
uses one
set of controls to
DVD and VCR. The
operate both
following buttons
successfully controlling each part.
1.
or
2.
are
helpful
front
panel
to turn
on
on
the remote control
this unit.
DVD Button
Press DVD button
on
the remote control when
you want to control the DVD.
The DVD indicator will light on the front
display
3.
panel
to show that the DVD is selected.
VCR Button
Press the VCR button
on
the remote control
when you want to control the VCR.
The VCR indicator will light on the front
display
4.
in
POWER Button
Press the POWER button
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on
discs.
requested
___________________________________
Important
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
some
to this unit and not
1. When this crossed-out wheeled bin symbol
is attached to a product it means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should
be disposed of separately from the municipal waste stream via designated collection
facilities appointed by the government or the
local authorities.
3. The correct disposal of your old appliance
will help prevent potential negative consequences for the environment and human
health.
4. For more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the
shop where you purchased the product.
CAUTION:
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
as a
the back
___________________________________
Disposal
confined space
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
guide
on
purchase.
RAIN OR MOISTURE.
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this
owner's manual carefully and retain for future reference,
should the unit require maintenance, contact an authorized
service location-see service procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to
laser beam, do not try to open the enclosure. Visible laser
radiation when open. DO NOT STARE INTO BEAM.
unique
available to others. You should record
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
a
PLAYER, PLEASE
SERIAL NUMBER: The serial number is found
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
WARNING: Do not install this equipment in
such as a book case or similar unit.
DVD
625p
CONTACT OUR CUSTOMER SERVICE CENTER.
product.
TRIC
PROBLEMS, IT IS ECOM-
panel
to show that the VCR is selected.
DVD/VCR Button
Press the DVD/VCR button
toggle
on
the front
panel
control between the DVD and the VCR.
to
Contents
PlayingaDVDorVideoCD...............27-29
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................7
RemoteControl.........................8
RearPanel.............................9
GeneralFeatures.......................27
MovingtoanotherTITLE...............27
.27
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................27
.27
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.28
SlowMotion.........................28
Random............................28
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B..........................28
Repeat.............................28
3DSurround.........................28
TimeSearch.........................28
Zoom..............................29
MarkerSearch.......................29
SpecialDVDFeatures...................29
TitleMenu..........................29
DiscMenu..........................29
InstallationandSetup
.
.
.
.
.
.
.
.
.10
.
CameraAngle.......................29
.29
ChangingtheAudioLanguage
.
Connecting to a TV & Decoder (or Satellite) .10
.11
Connecting to Optional Equipment
.12-16
BeforeOperation-VCRpart.
.12
Tuning in a video channel on your TV
.12
Using your VCR for the very first time
.13
SettingtheclockManually.
Tosetthecoloursystem..............13
.14
Howtousingthemainmenu.
.14
Tuning in TV Stations Automatically
.15
TuninginTVStationsManually.
.16
Changing the order of TV Stations
DeletingTVstations..................16
.17-21
BeforeOperation-DVDpart.
On-ScreenDisplay......................17
InitialSettings.......................18-21
GeneralOperation....................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................31
RepeatTrack/All/Off...................31
Search.............................31
Random............................31
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Operation....................23
Playingatape.......................23-25
.23
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.23
.24
InstantTimerRecording(ITR).
Timer recording using On Screen Display .25-26
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3DSurround.........................31
.
.
.
RepeatA-B..........................31
AutoPlay..........................21
DivX(R)VOD.......................21
LOCK(ParentalControl)................22
Rating............................22
.22
Password(SecurityCode).
CountryCode......................22
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles............................29
.30
PlayinganAudioCDorMP3/WMADisc
.31
AudioCDandMP3/WMADiscFeatures
Pause..............................31
.
.
.
.
.
.
.
.
.
.
.
.
.
AUDIO.............................20
.20
DolbyDigital/DTS/MPEG.
.20
SampleFreq.(Frequency)
.20
DynamicRangeControl(DRC).
Vocal.............................20
OTHERS...........................21
PBC.............................21
.
.
.
TVAspect.........................19
DisplayMode......................19
ProgressiveScan...................19
TVOutputSelect....................19
.
.
.
.
.
.
.
DiscAudio/Subtitle/Menu.
.18
DISPLAY...........................19
.
.
.
MenuLanguage....................18
.
.
.
LANGUAGE.........................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ProgrammedPlayback.....................32
.32
RepeatProgrammedTracks.
.32
ErasingaTrackfromProgramList
.32
Erasing the Complete Program List
ViewingaJPEGDisc......................33
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................33
StillPicture..........................33
MovingtoanotherFile.................33
Zoom..............................33
Torotatepicture......................33
To listen to MP3/WMA music watching picture
.33
.34
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................34
PlayingaDivXMovieDisc................35
Additional Features-VCR part
.
.
.
.
.
.
.
.
.
.36-37
.
OnScreenDisplay....................36
TapeCounterMemoryStop.............36
Lock(ChildLock).....................36
.36
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............37
.37
WideScreenCompatibility16:9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder....................37
AdditionalFeatures.....................38
LastSceneMemory...................38
ScreenSaver........................38
VideoModeSetting...................38
Controlling other TVs with the remote control 38
CopyingfromDVDToVCR...............39
.39
Recording from another video recorder
.
.
.
.
Reference....................40
LanguageCodes.......................40
CountryCodes.........................40
Troubleshooting........................41
Specification..........................42
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
ensure
reference.
provides
information
on
the
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Discs
on
Handling
This manual
Symbol
Notes
Discs
Do not touch the
the
disc
on
by
playback side of the disc. Hold
edges so that fingerprints do not get
the
the surface. Never stick paper
or
tape
on
the disc.
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
symbol.
DVD
VCD
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
DVD and finalized DVD±R/RW
use
Selecting
Video CDs
MP3
MP3 Discs
DivX
of the
spray intended for older
Audio CDs
JPEG
the task easier.
following symbols
represented by the
one
to the disc
CD
WMA
making
the
You must select
VCR)
to view
on
vinyl
records.
Viewing Source
of your output
the TV screen.
one
sources
(DVD
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
or
?
WMA Discs
and
JPEG Discs
output
source
of DVD deck is viewed
on
lights
the TV
screen.
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
?
DivX Discs
and
output
source
of VCR deck is viewed
on
lights
the TV
screen.
Notes:
About the
"
?
Symbol Display
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
DVD video disc.
4
on
that
specific
If you insert a disc while the DVD+VCR is in the
VCR mode, the DVD+VCR will switch to DVD mode
automatically.
?
If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode
automatically.
Types
of
Playable
Discs
Regional
code
This DVD
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
encoded DVD software. This unit
only
Video CD
(VCD)
(8cm/12cmdisc)
DVD discs labeled "2"
Notes
Audio CD
?
(8cm/12cmdisc)
on
Regional
can
"ALL".
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
code or the disc cannot play.
addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
play
2
Codes
Most DVD discs have
numbers in it
or
"2"
player's regional
In
This indicates
?
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
a
Notes:
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
Do not
irregularly shaped CDs (e.g.,
heart-shaped or octagonal) since they may
(the
use
result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
Manufactured under license from
Dolby
Laboratories.
are
"Dolby" and the double-D symbol
trademarks of Dolby Laboratories.
DTS and DTS
Digital Out
Digital Theater Systems,
are
trademarks of
Inc.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
two standards for
media, meaning the DVD
erased and re-recorded.
4.38
are
Gigabytes
much. There
only
Single-sided
content
discs
can
can
hold
and double-sided discs hold twice
are no
dual
layer single
be
as
sided recordable
discs.
VCD
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
with
quality
CDs.
Title
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
and cast interviews could be title 3. Each title is
(Video CD)
along
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
assigned
easily.
a
reference number
enabling
stereo sound.
Chapter (DVD video discs only)
A chapter is a segment of a title such
MPEG
MPEG is
an
you to locate it
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
film
or one
interview in
a
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
audio.
Scene
MP3
On
MP3 is
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Corp.
Track
JPEG
A distinct element of audiovisual
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
information, such
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
DivX
track of video
DivX is the
name
which is based
on
of
a
revolutionary
the
new
MPEG-4
standard for video.You will be able
movies
6
using
this DVD
new
player.
video codec
compression
to play DivX
as
of audio.
(with multiple angles)
one
and several tracks
Front Panel
Forward
Skip/Scan,
Fast-Forward
(
)
chapter/track.
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
Winds the
PLAY
( G)
tape forwards.
Starts
playback.
STOP(A)
Stops playback.
Reverse
Go to
of current
beginning
Skip/Scan, Rewind (
)
chapter/track or to PREVIOUS chapter/track.
Press and hold for two seconds for
a
fast
reverse
search.
Rewinds the
DVD OPEN/CLOSE
Opens
closes the disc
or
Disc
Insert
a
(
DVD/VCR Selector
tape.
)
Video IN Jack
tray.
Tape Compartment
Tray
disc here.
Audio IN
(L/R)
Tape Eject
Jacks
/
/
POWER
Display
Switches the unit to
ON
Channel
or
Display
Shows the current
OFF.
Programme
window
status of the unit.
Selectors.
Remote Sensor
Point the remote control here.
Window
Child Lock is
Indicates
Indicates the
engaged
repeat mode.
DVD+VCR is in timer
timer
recording
Progressive
VCR deck is selected.
VCR
A disc is loaded in the DVD deck.
when
a
disc is loaded in the
DVD deck and flashes when
no
or a
A Cassette is in the VCR deck.
Scan is set to On mode.
(Lights
is
recording
programmed.
recording
is
engaged.
DVD to VHS copy is in progress.
disc is
Indicates TV mode.
loaded.)
(See
Notes
on
page
24.)
DVD deck is selected.
DVD
VCR
P
REC
TV
Indicates total
playing time/elapsed
time/current time
7
Remote Control
POWER
Switch this unit ON or OFF.
DVD/VCR select button
Selects operational mode of
remote control.
OPEN/CLOSE
EJECT
Open or close the the disc
-
-
(see
-
VCR: Rewinds the
STOP
mode, for fast
TV VOL +/--:
tape during the
reverse
( )
Pause playback temporarily /
press repeatedly for frame-byframe playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
?
Access
the
with PBC.
Displays
?
?
?
?
Play
language (DVD).
subtitle
a
LOCK
language.
input sources
(Child Lock)
on
into
tape.
and off.
TITLE
Display
the title
menu
of the disc if
available.
DISC MENU
of a DVD disc.
PROGRAM
Access or remove program menu.
MARKER
Mark any point during playback.
?
?
?
Repeat sequence.
recording speed of
SEARCH
Display MARKER SEARCH
?
tape.
RANDOM/CM SKIP
tracks in random order.
CM SKIP
?
-
audio
Switch the Child Lock
ENTER/OK
menu selection.
the
an
REC/ITR
Record your
-
Select the
video CD
?
-
-
a
?
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
-
of
ANGLE
Select DVD camera angle if available
ZOOM
Enlarge video image.
menu
A-B/LP
menu
?
PR/TRK(+/-)
menu
menu.
SUBTITLE
Select
FGDE(left/right/up/down)
Access
setup
AUDIO
Select
counter.
Acknowledge
or remove
RETURN
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time or
-
off TV sound.
SETUP/ i
?
item in the
on or
TV's volume.
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
search.
an
Adjusts
MUTE: Turns
picture
search and Advances the tape during
the STOP mode, fast forward picture
Select
source.
TV PR +/--: Selects TV's channel.
forward.
PAUSE/STEP
recording
off the TV.
on or
TV AV: Selects the TV's
(m/M)
or
for
38)
p.
TV POWER: Turns
BACKWARD / FORWARD
DVD: Search backward
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
-
Tape Eject.
AV
Select input
into tape.
0-9 numerical buttons
Select numbered items in a menu.
tray.
?
-
-
menu.
CLEAR
Clear
a
track number
on
the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
REPEAT
Repeat chapter, track, title, all.
-
?
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
mix different
Detach the
battery
of the remote
new
batteries and
types of batteries such
dard, alkaline, etc.
8
installation
and
press the buttons.
Do not mix old and
battery
never
as
stan-
AAA AAA
batteries
cover on
the
control, and insert
(size AAA)
aligned correctly.
with
and
rear
two
Rear Panel
VIDEO/AUDIO
Connect to
a
OUT(Left/Right) (DVD/VCR OUT)
TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
TV with Y Pb Pr
AUDIO OUT
Connect the aerial
Connect to
this
Pb
Pr)
OUT)
AERIAL
using
(Y
inputs.
(Left/Right) (DVD EXCLUSIVE OUT)
an amplifier, receiver or stereo system.
EURO AV2 DECODER
jack.
Connect to
pay-TV
decoder
or
S-VIDEO OUT
Connect to
EURO AV1 AUDIO/VIDEO
Connect to your TV set
a
(DVD
EXCLUSIVE
TV with S-Video
(VCR
or
another video recorder.
IN+OUT / DVD
OUT)
input.
OUT)
another video recorder.
COAXIAL
Connect
(Digital audio out jack) (DVD EXCLUSIVE OUT)
to digital (coaxial) audio equipment.
RF.OUT
Connect to your TV
using
this
jack.
AC Power Cord
Connect to
a
power
source.
Do not touch the inner
panel. Electrostatic
damage to the unit.
pins of the jacks on the rear
discharge may cause permanent
9
Installation and
Setup
Progressive Scan
Tips:
If your television is
high-definition or "digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
resolution possible.
Depending
your TV and other equipment you
wish to connect, there are various ways you could
on
connect the unit.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
For better sound
Make
sure
this unit is connected
Set the TV to the correct video
directly to the
input channel.
Do not connect this unit's AUDIO OUT
in
phono
jack (record deck)
Connecting
(or Satellite)
Make
on
system.
VIDEO OUT
sponding
jacks on the DVD Player
jacks on the TV using the
in
to the
corre-
Y Pb Pr cable.
Right AUDIO OUT jacks of the
audio left/right in jacks on the TV
Connect the Left and
DVD
Player
to the
using
the audio cables.
Notes:
Progressive to "On" on the setup
progressive signal, see page 19.
Set the
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
menu
for
video
analog
or
S-VIDEO
of the
using
Rear of this unit
(DVD
exclusive out
connection)
(AV)
of this unit to the SCART
panel
the TV
on
Connect the COMPONENT/ PROGRESSIVE SCAN
connection.
Connect the EURO AV1 AUDIO/VIDEO
rear
2.
of your audio
to the
to a TV & Decoder
Basic connection
1.
jack
TV.
following connections, depending
capabilities of your existing equipment.
one
the
1.
2.
Caution:
a
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
best connections.
reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 11.
connection
on
input
the
socket
SCART lead.
a
Some TV broadcasters transmit encoded television
which you can only see with a purchased
rented decoder. You can connect such a
signals
or
decoder
(descrambler)
Basic connection
1.
to this unit.
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
Rear of TV
of this unit.
AERIAL
2.
Connect the
RF.OUT
jack
supplied
the
on
television's Antenna
RF antenna cable from the
panel
Input.
rear
VIDEO
INPUT
of this unit to your
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pr
Pb
AUDIO INPUT
SCART INPUT
S-
UT
Y
DVD exclusive out connection
Component
1.
Decoder
Video connection
(or Satellite)
Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
the
jacks on the DVD Player to
corresponding in jacks on the TV using the
Y Pb Pr cable.
2.
Connect the Left and
Right
AUDIO OUT
the DVD
the TV
Player to the audio left/right
using the audio cables.
in
jacks of
jacks on
S-Video connection
1.
Connect the S-VIDEO OUT
S-Video
input jack
on
the
jack on this unit to the
TV using the S-Video
cable.
2.
Connect the Left and
the DVD
the TV
10
Right
AUDIO OUT
to the audio
Player
using the
left/right
audio cables.
in
jacks of
jacks on
Rear of this unit
(Basic connection)
Note:
If the TV has
with the S-video cable.
input, connect the DVD player
When using an S-video cable, do
not connect the
video cable.
an
S-video
yellow
Connecting
Optional Equipment
to
Connecting to an amplifier equipped with
channel analog stereo or Dolby Pro Logic
II /Pro Logic
two
Connect the Left and
this
Right
and right
unit to the audio left
er, receiver
AUDIO OUT
in
jacks on your amplifisystem, using the audio cables.
stereo
or
jacks
on
Notes:
If the audio format of the
the
capabilities of
produce a strong,
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
1.
Connect this unit's DIGITAL AUDIO OUT
(COAXIAL) to
amplifier. Use
the
an
jack
InstaliodSeup
corresponding in jack on your
optional digital (coaxial) audio
cable.
2.
You will need to activate this unit's
"AUDIO"
(See
Digital
on
digital output.
20).
page
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
output will be in
Licensing agreement, the digital
DTS digital out when DTS audio
stream is selected.
Rear of this unit
2 channel
analog
stereo
or
Pro
Dolby
Logic
II/Pro
Logic
connection.
DVD exclusive out
DVD/VCR OUT
Digital
COAXIAL
DIGITAL INPUT
multi-channel connection
L
(DVD
exclusive out
connecttion)
R
AUDIO INPUT
Amplifier (Receiver)
11
Before
in
Tuning
Operation-VCR part
video channel
a
on
TV
your
Notes:
The
output frequency of this video recorder (VCR)
RF
by
another TV
distorted, you
station,
or
if the
already
picture is
change
of your VCR. Stages 5
8 will show
change the output frequency of your
~
Your TV receives
signals
channel number
You
1.
VCR
as
on
Select
video channel
Insert
a
video
tape into your VCR
and press N on the remote control.
Select a TV channel number on which you wish to
watch video's. Don't worry if you don't have a
VCR
on
play
at this
and continue
stage!
stages 3
seeing video playback
a bright blue screen.
3.
If you switch your
4, instead of
tune your TV until you
picture
is
see
sharp
and the sound is clear.
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The AV channel is already
4.
for
video
optimum
Store this channel
I
the front of your VCR when you
on
Tune this channel
so
that
appears.
Store this channel
on
a
bright
playback
on
your TV.
your TV.
You will need to look at the TV instruction book if
that you have correctly installed your VCR
and successfully tuned in a dedicated video channel
sure
your TV. If you do not tune in a dedicated video
channel on your TV you will be unable to view and
record video tapes!
on
on
Using your VCR
for the very
first time
Following picture will display on the TV screen
when you have just connected your video
recorder for the very first time.
To make
tuning
3 to 4
shown "ACMS"
as
TV
8 if you cannot
obtain clear video playback as described in
Only
carry out
stages 1
stages
4. Select
~
a
5
stations, please follow stages
(see p.14).
~
TV channel number
6.
more
(3/4)
on
the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
screen.
12
B
NN L
Pr-12
displayed).
Press PROG.
A
on
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be
screen
your TV.
you do not know how to do this.
5.
blue
~
Tune this channel until the video
pre-tuned
which you wish to
Note:
pre-recorded
to
on
your VCR.
your TV.
video-tape
TV channel number
have finished.
Make
2.
a
Press
that you have correctly installed your
described earlier in this book.
on
SCART lead.
watch video's.
sure
Press POWER to turn
Turn
8.
.
Make
a
a
your TV and tune it in so that
you may watch video tapes. If you have used a
SCART or AUDIO and VIDEO cables then your TV
built
to select another video
can
VCR with
on
already have a dedicated
into it, usually called AV
(3/ 4)
also set it to "OFF" if there is any
interference when your TV is connected to the
from the video recorder
should
Press PROG.
channel. You may select any channel number
between 22 and 68.
you how to
VCR.
like another TV station. You have to select
(VCR)
7.
the transmitter channel
can
36
PSET
R
is set at UHF channel 36. If channel 36 is
used
CHANNEL
ACMS
CH
DDK
FI
PSSFOTHERS
Setting
the clock
To set the colour
Manually
The clock in your VCR controls time and date
settings for your VCR.
automatically during ACMS
(Automatic Channel Memory System) when
The clock is set
VCR detects
Teletext
a
signal.
channel that broadcasts
your
a
1.
Press i.
2.
The main
3.
Press 1
or
2 to select the SYS and press OK.
4.
Press 3
or
4 to select
If the broadcast
the clock will not be set and
system
signal is weak
will require setting
menu
will appear
on
the TV
according
screen.
to the COLOUR
system used.
manually.
1.
Press i.
Press 1
or
2 to select SET.
Press OK.
SYS
The ACSS mode
can
be set to "OFF"
OK if you want to set the time
by pressing
InstaliodSeup
SYS
fOSD
ON
OFF
i
manually.
5.
Press 1
or
2 to select the RF AUDIO.
Press 3
or
4 to select
according
to the RF AUDIO
used.
HHMNDDMMYY
--
:.
-
-
--
--
--
---
.
ACSS
12
:
ON
OK i
SET
2.
Use the v
or
V on
the remote control to alter the
SYS
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
of the week will appear
when you enter the year.
day
SYS
fOSD
ON
OFF
6.
Press i to
remove
i
the
menus
from the TV
screen.
automatically
HHMNDDMMYY
8
12
:.
0010105SAT
.
ACSS
:
SET
3.
If you make a mistake press 1
correct details.
4.
Press i.
OFF
OK i
or
2 and enter the
13
How to
using
This VCR
easily be programmed by using
displayed on screen.
the
menu
can
menus
The
the main
controlled from the Remote
menus are
Control Handset.
1.
Switch
your TV set and video recorder
the POWER button.
on
pressing
2.
by
menu
will appear
the TV
on
Tuning
Automatically
If the TV broadcast
signal
is weak your VCR
may not detect the necessary information and
will not be able to store them correctly. To overcome
this
turn to the MANUAL TUNING
problem please
section
Press i button.
The main
in TV Stations
on
page 15.
1.
Press POWER to turn
2.
Press i button.
your DVD+VCR.
on
screen.
The main menu will appear on the TV
Press 1 or 2 to select the ACMS.
screen.
Press OK.
SET
SYS
fOSD
ON
OFF
A
SET
Timer
recording setting (see p. 25).
PR SET Manual tuning setting (see p. 15).
ACMS ACMS (Automatic Channel Memory
System) (see p. 14).
SET Date & clock setting (see p. 13).
SYS To set the Colour TV System (see p. 13).
(Dr.) To check a problem with your VCR
(see p. 36).
F.OSD ON/OFF To display the operational
-
CH
NN L
Pr-12
REC
B
DDK
FI
PSSFOTHERS
Pr-12
fOSD
Pr-12
ON
OFF
ACMS
-
-
3.
or
-
-
-
(see
(16:9/4:3)
-
p.
4.
36).
To select the
DECODER
Press OK to start the automatic
storing
channels of the TV stations in your
(see p. 37).
To use a pay-TV decoder (or
Satellite) with your VCR
(see p. 37).
(OPR)
O
NIC
-
To
improve
(see p. 23).
To activate
sound
the
(see
or
playback picture
deactivate the NICAM
digital
37).
p.
with 1
of the
area.
aspect ratio of your
01
C02
00
TVE
02
C03
00
HRT
03
C04
00
CNN
S
-
area
2.
TV
-
to your
country according
A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Netherlands, P:Portugal,
S:Sweden, SF:Finland, "OTHERS"
-
mode of your VCR
Select the
E
Pr-12
ACMS
5.
The TV STATION TABLE will appear when
is completed.
Press i to
save
your
tuning
settings.
Tip:
You
change the menu language on the DVD
setup menu. (See the Menu Language on page 18.)
3.
can
Press 1 and 2 to select the desired
Press OK and press 3
4.
Press i to
remove
the
or
C03
00
HRT
03
C04
00
CNN
04
C05
00
TMC
05
C06
00
YLE1
06
C07
00
YLE2
07
C08
00
RIKIS
08
C09
00
RTE1
menu.
PSET
R
4 to select.
menus
02
from the TV
screen.
MOVE
:
DELETE
:
,
Notes:
The DVD+VCR's clock will be set
automatic
automatically
when
tuning has finished. If the clock is wrong
please see "Setting the clock Manually" on page 13.
14
in TV Stations
Tuning
In certain
areas
of the
Manually
country broadcast signals
CH
04
C04
may be too weak for your DVD+VCR's automatic
tuning process to find or assign TV stations
PR
:
AV
PSET
R
You must tune in these weaker broadcast stations
6.
in order for your DVD+VCR to store
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
Press 2 to select STATION
so
that you may
name
your TV station.
Press OK.
them.
1.
STATION
CHANNEL/CABLE
correctly.
manually
MFT
7.
screen.
Use 3
or
station
name.
Use 1
Press OK.
or
4 to select letters and numbers for the
2 to
move
back and forth between
characters.
Press OK.
PR
CH
01
MFT
STATION
00
PR-03
Pr-12
ACMS
SET
SYS
fOSD
CHANNEL/CABLE
ON
OFF
:
AV
PR
CH
MFT
04
C04
00
STATION
PSET
R
2.
PSET
R
Press i.
The station table will appear.
3.
Press 3
8.
Press
i, confirm the station placement.
4 to select the programme number that
you want to tune (for example, PR 04).
or
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
--
--
-----
--
--
-----
--
--
-----
--
--
-----
05
06
07
08
PSET
R
MOVE
:
DELETE
:
PR
CH
MFT
04
C04
00
STATION
PSET
R
If you wish to
stages 3 8.
,
manually
tune other stations
repeat
-
4.
Press OK.
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69, S01
-
tune,
use 3 or
S41.
4 to find the
MFT
STATION
--
----
04
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
07
required
08
station.
PSET
R
Press i
Your
CH
00
06
9.
PR
C01
05
Enter the channel number of station that you want
to
01
CHANNEL/CABLE
:
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
again.
new
TV station has
now
been tuned into your
DVD+VCR.
AV
P
SET
R
5.
Searching
will
stop when it locates
a
stations.
Press 2 to select MFT.
Control the fine
tuning
of the station
by using
3 or
4.
15
the order of TV Stations
Changing
After
tuning TV stations into your VCR you may
wish to change the order in which they are
stored without having to retune them against!
The instructions given on this page will show you
how you can simply move them into your desired
Deleting
After
TV stations into your VCR you may
wish to delete a station.
tuning
how you
stations.
1.
order.
1.
TV Stations
can
Press 1
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
delete any unwanted TV
Press i.
The main
Press i.
easily
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press OK.
screen.
Press OK.
PR
CH
01
MFT
STATION
00
PR-03
Pr-12
ACMS
SET
SYS
fOSD
PR
CH
MFT
STATION
00
PR-03
01
CHANNEL/CABLE
ON
OFF
:
AV
PSET
R
Pr-12
ACMS
SET
SYS
fOSD
CHANNEL/CABLE
ON
OFF
:
AV
P
SET
R
2.
2.
Press i.
3.
Press 3
Press i.
Press 3
4 to select the
or
you want to
Press 2.
move
PR
4 to select the
you want to delete.
programme number
(for example,
or
02
C02
00
PR-02
03
C04
00
PR-04
05
01
C01
00
PR-01
01
C01
00
PR-01
06
02
C02
00
PR-02
02
C02
00
PR-02
07
03
05
06
07
08
C04
PR-04
04
00
--
--
-----
05
--
--
-----
06
--
--
-----
07
--
--
-----
08
PSET
R
MOVE
:
DELETE
:
08
C04
00
--
C03
--
PR
01)
-----
00
PR-03
--
--
-----
--
--
-----
--
--
-----
PR-04
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
4.
PSET
R
,
(for example,
03).
04
04
programme number
MOVE
:
DELETE
:
,
Press 1.
After
a
short
while, the selected station will be
deleted.
3.
Press 3
4 to select the
or
you want to
move
to
programme number
(for example,
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
--
--
PR
If you wish to delete other TV stations
stages 3 4.
05).
-
02
03
07
08
04
05
--
--
-----
--
--
-----
--
--
-----
06
07
08
PSET
R
4.
5.
The selected programme will be moved to the
new programme number.
move
other TV stations
repeat
-
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
06
07
08
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
5.
16
Press i to
remove
--
C03
the
00
PR-04
--
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Press i to
remove
00
PR-03
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
Press OK.
If you wish to
stages 1 4.
C02
-----
05
06
repeat
the
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Before
Operation-DVD part
On-Screen
You
Display
the
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
display
can
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
inputting
Title Number
the
change
the title
Chapter
highlighted.
For
number).
some
also
If
no
provide
button is
on-screen
Playback
TITLE
A-B
for 10
1/12
functions,
B, Numbers
ENTER
0:20:09
Numbers, ENTER
b/Bor
AUDIO
InstaliodSeup
setting.
all of the features
seconds, the
pressed
display disappears.
language
ABC
b/Bor
1 ENG
SUBTITLE
Angle
b/Bor
1/3
ANGLE
Sound
3D SUR
b/B
Status/Restrictions
Example: On-Screen Display during
playing VCD
Repeat
title
Repeat
sequence
Selection Method
Items
1/9
b /
language
and Digital Audio
Output mode
Notes:
?
B, Numbers
Audio
Subtitle
Some discs may not
shown below.
Number
Time search
setting. You can
appropriate (e.g.
press ENTER to execute the
?
1/3
b /
ENTER
item.
the number buttons if
use
Selection Method
Items
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing DVD Video
Enter
a
Marker
Track Number
MARKER SEARCH
123456789
Marker Search
menu
(or
PBC
1/3
Action
play
from this
prohibited
or
ENTER
Numbers
0:20:09
point
not available
B, Numbers
mode)
Time search
Resume
b /
ENTER
b/Bor
Audio Channel
STEREO
Sound
AUDIO
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Selection Method
Items
Track Number
1/3
b /
B, Numbers
ENTER
Time search
0:20:09
Audio
language
and Digital Audio
Output mode
Subtitle
Sound
language
b/Bor
1
MP3
ABC
Numbers, ENTER
ENG
AUDIO
b/Bor
SUBTITLE
3D SUR
b/B
17
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 22.
To
display
display
the
Disc Subtitle
Off
Disc Menu
Original
2.
Use v / V to select the desired
alternate
Setup
menu
appears.
option then press
to the second level. The screen shows
the selected
item,
Use v / V to select the second desired
press B to
move
as
well
option
as
then
Select
a
language
for the
Use v / V to select the desired
5.
Press SETUP
then press
ENTER to confirm your selection. Some items
require additional steps.
N to exit the
setting
Setup
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
on-screen
DVD
menu.
original language
Other: To select another
track
in which the
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
to the third level.
4.
or
Language
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
setting for
setting(s).
Select
Select the
1.
the current
Menu
Disc Audio / Subtitle / Menu
Operation
move
Move
display.
To go back to the previous level:
Press b on the remote control.
18
Original
screen.
To go to the next level:
Press B on the remote control.
3.
Disc Audio
A second press of
menu.
SETUP will take you back to initial
B to
English
Language
and exit the Menu:
Press SETUP to
General
Menu
4. When the confirm
DISPLAY
Cancel is
DISPLAY
TV
Mode
Progressive
TV
Output
to
16:9
Aspect
Display
menu
highlighted
highlight Enter.
as
appears on your screen
default. Use the b button
Widescreen
Scan
5.
Off
Select
Pressing
scan
RGB
ENTER will set this unit to
Progressive
mode.
Caution:
Once the
Move
TV
:
16:9
Select when
:
Select
DVD
Aspect
4:3
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
a
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "DISC" is displayed on the display window.
standard 4:3 TV is connected.
Select when
16:9 wide TV is connected.
a
2)
Press STOP and hold it for five seconds before
Display
Display
DVD
Mode
Mode
setting
works
only
when the TV
TV
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
on
the
Output
Set this unit TV
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Output
Select
options according
to the
type.
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
jacks
progressive
Select
TV connection
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
To turn On
it. The video
Aspect
mode is set to "4:3".
Progressive
InstaliodSeup
output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
releasing
on
this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
scan:
Connect
component out of this unit to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
TV
Aspect
Display
Mode
Progressive
TV
Output
Scan
On
Off
Select
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
19
AUDIO
Each DVD disc has
Set this unit AUDIO
audio
system you
variety of audio output options.
options according to the type of
a
use.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Dolby Digital
Select
DVD
/ DTS / MPEG
DivX
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
with
Dolby Digital,
a
DTS
or
MPEG decoder.
PCM
MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
(for Dolby Digital
/
audio.
Off
not
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
is
DVD
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice
is
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of
any further processing.
signal through
Check the documentation for your
its capabilities.
Dynamic Range
With the DVD
Control
format, you
amplifier
DVD
(DRC)
can
hear
a
without
to
verify
DivX
program's
soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the
quietest ones).
This allows
you to listen to a movie at a lower volume without
losing clarity of sound. Set DRC to On for this effect.
Vocal
DVD
Set to On
playing.
only
when
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
20
a
on
the disc mix into
OTHERS
The
DivX(R)
PBC, Auto Play and DivX(R) VOD settings
can
be
changed.
You
VOD
DivX
display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
can
OTHERS
PBC
Auto
DivX(R)
On
Off
Play
Your
DivX(R)
Video On Demand
VOD
Select
registration
code is
To learn
more
:
XXXXXXXX
visit
www.divx.com/vod
(Done)
Move
Select
The
PBC
Set
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
are
or
encrypt
Off.
played according
to the
PBC.
Off: Video CDs with PBC
are
played
the
same
way
as
Audio CDs.
Auto
You
Play
move
Notes:
If you rent the DivX VOD file, it has several
viewing limits as shown below.
?
Display
DVD
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
Play
mode is set to
play
back the title
longest playback
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
DivX(R)
can
options
of
watch the file.
VOD Rental
This rental has 3 views left.
Do you want to
On, this DVD player will
search for title that has the
then
the number which you
View
can
If Auto
InstaliodSeup
file.
use one
of your 3 views now?
time and
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
21
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Area Code
ES
(Security Code)
enter
can
2. Follow
step
Input
Move
shown left
4-digit code,
again to verify.
it
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
If you
control feature allows you to block
to scenes below the rating you input, there
new
Press SETUP to
2.
Input
the
6-digit
display
Enter
a new
code
1. Select
Enter the code of the
"Rating"
on
the LOCK
menu
then
were
press B.
Setup
clear it
using
menu.
security
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
a
from 1 to 8
using
1.
tions and
Rating one (1)
rating eight (8) is
has the most restricthe least restrictive.
unlock, parental control is
plays
not active
in full.
Notes:
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
country/area
used to rate the DVD video
whose standards
disc, based
on
the
chapter.
Select "Area Code"
on
the LOCK
menu
then
2.
Follow
3.
Select the first character
4.
Press ENTER and select the second character
using
the v / V buttons.
Unlock
If you select
and the disc
described above.
press B.
5.
1-8:
as
DVD
list in the reference
access
available
the
can
by
Area Code
scenes
menu.
number "210499" and the
your children from being able to view
material you believe is unsuitable.
If you set
the same
then press ENTER.
forget your Security Code
1.
3.
preventing
Rating
or
code is cleared.
parental
3. Select
then press B.
(Rating). "Change"
If you forget your security code you
the following steps:
alternative.
2. To
menu
Select
DVD
for children to view.
22
as
the LOCK
4. Press SETUP to exit the
Some movies contain
access
2
on
highlighted.
3. Enter the
The
change password.
1. Select Password
"New" is
Rating
or
step
2
as
shown left
(Rating).
using
v / V buttons.
v / V buttons.
Press ENTER to confirm your
selection.
country code
Operation
Playing
You will
only
a
Logic search:
During fast forwarding
tape
be able to load and
eject video
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
tapes (on
PAL
Getting
a
better
When
cassette is inserted and
a
5.
TV).
picture
playback started,
the
automatic
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press TRK + or on the remote control
to manually adjust the tracking until any distortions have
to switch automatic
1.
Make
back
tracking
on
on
as
Turn
on
again.
reduce them with TRK
that you have correctly connected your
described earlier in this book.
your TV.
Press POWER to turn
may appear on the picture according to the status
of tape. If distortions can be seen in the picture,
the remote control
sure
VCR
6.
2.
Press N to start
facing
your tape.
video cassette which has had its
cassette will start
removed, playback of the
automatically.
AUTO TRACKING
Your VCR will
give
3.
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
the
tracking
to
1 Press 30 seconds
3 Press 90 seconds
a
4 Press 120 seconds
the
5 Press 150 seconds
6 Press 180 seconds
down at about 1/19 times the normal
OPR
can
be
playback
for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
paused
Still
picture quality can
pressing TRK + or
be
improved slightly by
playing
your tape.
Double
speed playback
Press the "N (X2)" button during normal
playback. The tape will play back at double speed
1.
Press i.
2.
Press 1
3.
Press OK.
4.
Press
normal
(X2)"
Response)
3
or
2 to select OPR.
or 4
repeatedly
to select:
OFF, SOFT
or
SHARP.
and without sound.
Press the "N
Picture
automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape. Please note that the OPR icon ( ) will only
appear in play that mode when playing a tape.
-.
Press N to continue
(Optimum
This feature
.
4.
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIP to skip:
tape frame by frame.
If you press FORWARD, the picture will be slowed
Tapes
Operation
2 Press 60 seconds
picture.
repeatedly to advance
Press PAUSE/STEP
playback.
CM
away from you.
playing
If you load a
record protection tab
-.
tape is reached, your VCR will
stop playback automatically, rewind, stop, eject the
tape.
on
arrow
or
If the end of the
The video cassette should have the window side
up and the
Press STOP to end
+
Press EJECT.
your VCR.
Insert the video cassette into your VCR.
facing
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play,
2xplay, 7xplay). To switch off the slow motion and
Slow motion
shuttle, press the desired function.
During slow motion and shuttle, the noise bars
-
been removed. Press numbered 0
or
button to return to
playback
Please note you may
at
playing
speed
5.
a
only
set OPR when
tape.
Press i return to
screen.
Picture search:
back press either FORWARD or
BACKWARD and this will enable you to rapidly
During playing
wind the
tape (7 times normal playback) and
where you are on the tape.
see
Pr-12
PSET
R
ACMS
OFF
SOFT
SHARP
fOSD
ON
OFF
23
Instant Timer
5.
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
produce improved picture and
quality, however LP will provide twice
recording time as SP.
Instant Timer
video cassette
Your VCR
runs
Press REC/ITR to start
which
will record up to 180 minutes using Standard Play
(SP); using LP you will be able to record up to 360
minutes. Please note there will be
Make
VCR
quality
when
slight
using LP.
a
7.
2.
Insert
Press PAUSE/STEP to avoid
protection
your VCR.
The video cassette should have the window side
facing
3.
4.
up and the
Press PR
arrow
facing
away from you.
to select the programme
number you wish to record.
+
or
-
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
EJECT will appear
seconds.
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
on
the
recording
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
on
the
rear
(Left
&
rear
Right)
sockets
on
the front of your unit.
on
the TV
screen
for
few
a
Notes:
If you do not wish to record
on a
tape (this
can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
It is
AV 1 for
recording.
Press EJECT.
control.
displayed.
be
Press STOP to end
cassette.
you wish to record from is
24
can
You may also directly select programme number
using the numbered buttons on the remote
If you wish to record directly from the SCART or
RCA sockets repeatedly press AV until the socket
unwanted
If you press PAUSE/STEP
unit will
enter the record pause mode and ITR is cancelled.
8.
tab into
recording
recording.
during ITR, this
loss in
your VCR.
on
video cassette with
a
recording.
Press PAUSE/STEP to continue
that you have correctly connected your
described earlier in this book.
Press POWER to turn
much
as
scenes.
sure
as
sound
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Tapes
1.
or
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
incorporates Long Play (LP)
and sound
6.
out.
enables you to record up to twice the amount of
time on a video cassette. For example an E-180
picture
Long Play
SP will
a
Recording (ITR) start recording
immediately for a set period of time or until the
Press LP if you wish to record in
Standard Play.
possible to record on a video cassette
record protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
recording using On
Screen Display
Timer
PR
DATE
PR-03
You may set up to seven timer record events
within one month of the current date.
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
SUMOTUWETHFRSA
Note:
Before
setting
the timer make
set the DVD+VCR clock
sure
correctly
that you have
and you know
which stations you have tuned TV stations
your DVD+VCR.
6.
Use v/V/1/2 buttons to enter the
on
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
DATE
TIME
41 4 ::
00 1 5
SP
~
Insert
a
video cassette with
protection
tab into
your DVD+VCR.
The video cassette should have the window side
facing
2.
up and the
facing
arrow
away from you.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
).
7.
Press OK.
PR
DATE
Press B and press v
or off.
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
--
--
--
--
DATE
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
ON
:
the timer record event.
setting
(v/V)
::
SP
,
8.
to enter the station that
you wish to record then press 2.
Press B to select the
Press v
(SP, IP,
or
or
recording speed.
V to select the desired
tape is left and
switches
DATE
speed from SP to LP, if
complete recording the program.
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
necessary, to
IP mode is not
selected when VPS/PDC is ON.
SP
SP
SP
SP
SP
PR
PR-03
Note:
If all timer record events
tape speed
LP).
IP mode determines how much
PR
on
TIME
~
VPS/PDC
Use the PR/TRK
V to switch VPS/PDC
41 4 ::
00 1 5 30
PR-03
SP
--
DELETE:
Press OK to start
or
TIME
PR
4.
::
Press i.
Press1or2toselectREC(
3.
start
and end times of the programme that you wish to
record.
PR
1.
recording
DATE
TIME
41 4 ::
00 1 5 30
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
full press v or V to
select the event that you wish to remove and replace.
Press b to delete the event.
5.
Use the PR/TRK
are
(v/V)
to enter the date of the
programme.
If you press OK before
select
one
of the
entering the date you may
following automated recording
features.
Press 1
or
2 to
select, then press OK
DLY To record every day (except
Sunday) at the same time.
SU~SATo record at the
same
to confirm.
Saturday
and
time every week.
25
Video
On
Timer
recording using
Screen Display (Continued)
9.
Press i to set another timer record event and follow
3 to 8.
steps
Check that the timer event details
Press i return to
are
correct.
screen.
If PLEASE CHECK is
you have entered
and will need to re-enter the data.
incorrectly
displayed,
10. Press POWER to switch your DVD+VCR to Timer
Standby mode.
The timer
resumed when the programme continues.
The VPS signal is broadcast by the TV station and
this controls the timer in the video recorder.
will appear in the display
window while your DVD+VCR waits to make the
VPS should be set ON for all timer
recording.
set
symbol (
)
11. Press POWER to end timer
recording.
***
Timer
Recording
During
automatically
power off when
ends.
recording standby mode, the DVD
cannot be operated. To use the
and
DVD+VCR, press POWER. After you use the DVD
or VCR, press POWER again to put the VCR into
timer
recording standby
mode.
later date you wish to delete or change any
of the settings in timer event memory you may do
so
a
without
mation
Use v
delete
having to enter all the timer event inforagain. Simply display the timer event screen.
or
or
V to select the event that you wish to
change.
Press b to delete the event...or
Press OK to
then press b or B to
Start and End times and
change;
Station, Date,
recording speed.
Press v
or
select;
V to enter the correct
information.
If Timer record events
Make
sure
recording
Overlap...
that the
events
preset times of the timer
do not overlap. If they do, the
earlier programme will
Example:
Programme
1 is
always
be
given priority.
programmed
to start at 16:00 and
programmed
to start at 16:30 and
end at 17:00.
Programme
end
The similar
2 is
at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
2 will be recorded.)
To watch
a
DVD while
performing
press DVD to select DVD mode.
a
timer
TV stations that
system PDC, which is used in the time
being in the Netherlands, can also be used with your
timer
VCR mode
recordings from
signals. It should be
broadcasting these
OFF for all timer recordings from
not broadcasting these signals.
new
The DVD+VCR will
If at
TV stations
are
Notes:
26
Programme System (VPS)
The Video Programme System (VPS) ensures that
the TV programmes that you have programmed for
timer recording will be recorded exactly from their
beginning to end, even if the actual broadcasting
time differs from the scheduled time due to delayed
start, or if the programme is extended beyond its
scheduled time. Also, if a programme is interrupted,
for example, if a news flash is inserted, the recording will also be interrupted automatically and
recording,
video recorder.
Playing
a
DVD
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
the TV and select the video
connected to the DVD
Turn
2.
the
on
the audio
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
side down.
playback
Press OPEN/CLOSE to close the
4.
starts
automatically.
If
playback
tray. Playback
does not start,
press N.
In
some
cases, the disc
menu
might
Unless stated
Moving
to another TITLE
When
disc has
a
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
and
stopped
then the
b / B to
move
You
(See
on
page
?
can
title
operating
21).
another
?
To watch
a
The
region
code for this
is 2
more
disc has
than
one
chapter/track
Press .
than
more
track, you
one
chapter
can move
or a
to
follows:
as
briefly during playback to select
the next chapter/track or to return to the beginning
of the current chapter/track.
?
Press . twice
ous
or
>
briefly
chapter/track.
To go
directly
to any
to
step back
chapter during
to the
DVD
previ-
playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
numberoruseb/B.
Search
1.
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
to select the
required
speed.
DVD
during
timer
DVD, DivX disc; X2, X4, X16
Video CD; X2, X4 or X8
recording standby
mode, press POWER and DVD
mode.
player
on a
?
?
DVDs may have a region code. Your player does
not play discs that have a region code different from
a
disc has
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 22.)
player.
(two).
its number while
When
If
your
to
to another title.
to another CHAPTER/TRACK
Notes:
?
can move
playback is
appropriate number (0-9) or use
Moving
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
"PBC"
title, you
one
play any title by inputting
playback is stopped.
procedures
Off
than
another title. Press DISPLAY while
Use the number buttons to select the track you
want to view and press RETURN to return to the
settings
more
appear
Use the b B v V buttons to select the
Menu
use
the remote control. Some features may also be
available on the Setup menu.
instead:
menu screen.
otherwise, all operations described
to switch to DVD
3.
To exit SEARCH
Changing
X100
mode, press N.
the Audio Channel
Press AUDIO
different
or
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
27
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
2.
on
mode,
title/chapter/all/track on a disc.
REPEAT during playback to select a desired
play
can
Press
a
repeat mode.
DVD Video Discs
press N.
?
Slow Motion
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
?
Title:
?
Off
repeats the
does not
:
-
current title.
play repeatedly.
Video CDs, Divx discs Repeat Track/All/Off
?
Track : repeats the current track
-
Press PAUSE/STEP
1.
The DVD
Use m
2.
player
or
(X) during playback.
will
now
M to select the
1/16, t 1/8, t 1/4,
1/16, T 1/8, T 1/4,
With
Video
a
or
t
or
T
required speed:
1/2 (backward), or
1/2 (forward).
t
T
CD, the Slow speed changes: T
1/16, T 1/8, T 1/4
To exit Slow Motion
3.
go into PAUSE mode.
or
T 1/2
(forward).
Note:
Slow motion
playback
in
reverse
is not
with
possible
Video CDs and DivX Discs.
All
?
Off
repeats all the tracks
:
does not
:
disc.
on a
play repeatedly.
Notes:
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 21).
?
mode, press N.
?
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
(Track)
3D Surround
To
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
speakers (instead
of the five+ speakers normally required for multi-channel audio from a home theater system).
Random
Press RANDOM
1.
The unit
during playback or in stop mode.
automatically begins random playback
and RANDOM appears
Press RANDOM
2.
again
the TV
on
screen.
Use 3
to normal.
during random playback, the unit selects
(track) and resumes random playback.
Video CD with
menu
Repeat
3.
28
will be
Use1or2totoselect"3DSUR".
To start
to
use
PBC, You
must set PBC to Off
the random function
(See
on
"PBC"
on
the
1.
page
a
effect, select "Normal".
at any chosen time
on
Press DISPLAY
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon and
"-:--:--" appears.
A-B
repeat
playing
box shows the
2.
2.
option
option.
highlighted.
Time Search
21).
1.
4 to select the sound
>
Note:
To
or
during playback.
To turn off the 3D Surround
another title
setup
2.
3.
By pressing
a
Press DISPLAY
The sound
Tip:
On
1.
3.
sequence.
Press A-B at your chosen
appears briefly on the TV
starting point.
required
start time in
"
A
*
to cancel.
end
"
point.
screen
and the
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
screen.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
the
seconds from left to
Press A-B
Press A-B
Input
4.
right.
Press ENTER to confirm.
selected time.
Playback
starts from the
Zoom
Use
1.
to
zoom
the video
enlarge
Press ZOOM
image.
during playback
still
or
playback
to
1600% size
screen
→
fit mode
→
the
can
100% size
when
screen
zoomed
4.
To
move
through
normal
repeatedly
or
press ZOOM
press CLEAR button.
?
may appear.
menu, the
Otherwise, the disc
screen.
offers features such
subtitle
a
angles,
as camera
options,
and
Press TITLE to exit.
3.
playback,
Disc Menu
Notes:
?
menu
spoken language and
chapters for the title.
the
picture.
resume
appears
menu
on
the
menu
The
2.
Use the bBvVbuttons to
corresponding number or use the b
to highlight your selection. Then press
Press TITLE. If the current title has
Normal, Enhanced,
and Maximum.
3.
the
ENTER.
1.
image appears on
you're playing a DVD movie.
Press 3/4 to select between
Input
Title Menu
the way the
change
the contents of DVD discs: Menus
B v V buttons
Screen fit mode:
You
Checking
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
DVD Features
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
Special
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
Press DISC MENU and the disc
Press DISC MENU
again
is
menu
displayed.
to exit.
disc, VR disc and movie file.
Camera
Marker Search
Angle
If the disc contains
To enter
You
Marker
a
start
can
from up to nine memorized
marker, press MARKER at the
desired
point
the TV
screen
a
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
playback
To enter
points.
recorded at different
scenes
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
on
markers.
To Recall
1.
2.
or
Clear
During
disc
search
menu
Within 10
a
Marked Scene
press SEARCH. The marker
appears on the screen.
playback,
seconds, press
b / B to select
number that you want to recall
3.
Press ENTER and
marked
Changing
scene.
playback
or
a
marker
clear.
starts from the
You
on
any marker by
the marker search menu.
can
play
Language
Press AUDIO
different
repeatedly during playback
audio language or audio track.
to hear
a
With DVD-RW discs recorded in VR mode that have
both
main and
Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
a
a
Or, press CLEAR and the marker
Subtitles
number is erased from the list.
4.
the Audio
inputting
its number
Press SUBTITLE
the different
repeatedly during playback
subtitle languages.
to
see
Note:
?
The subtitle file of the DivX file is
smi,
?
displayed only
srt and sub.
If there is
no
information
not read in the DivX
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
29
Playing
Audio CD
an
or
MP3/WMA
MP3 / WMA disc
limited
Disc
?
as
compatibility
with this
player
is
follows:
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
N
ENTER and
or
playback
?
?
starts.
AUDIO CD
1/12
0:52:07
List
Program
creates
Track1
an
Track2
?
Track3
Track4
File
names
and must
Track5
Track6
?
Track7
Clear All
Track8
PROGRAM
They
ISO 9660 file
system.
should have
a
incorporate
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 650.
MP3 / WMA
1.
Press v / V to select
to
2.
folder, and press ENTER
a
the folder contents.
see
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
Pressv/VtoselectatrackthenpressNor
ENTER. Playback starts.
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
This DVD
1/12
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
Info
PROGRAM
Edit
should
ID3 TAG
?
When
track
owner.
playing
titles, you
If there is
the
containing
information such
as
the information
by pressing
[ Song, Artist, Album, Comment, Genre ]
DISPLAY.
?
file
a
no
can see
information, "No ID3 TAG" appear
on
menu screen.
Tip:
?
If you
are
in
a
file list
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
and
highlight
press ENTER.
?
Press DISC MENU to
?
On
?
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
on
When
a
playing
titles, you
30
to the next page.
move
top of the
file
can see
menu
containing
is
highlighted.
information such
the information
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
by pressing
as
track
DISPLAY.
always
be
sought
from the
copyright
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
1.
2.
Press PAUSE/STEP
press
Moving
1.
playback, press PLAY,
PAUSE/STEP again.
ENTER
or
or
the next track
>
to
or
2.
To return to normal
until
repeatedly
playback, press RANDOM
RANDOM disappears from the
menu screen.
Tip:
to another Track
Press .
during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
during playback.
To return to
Press RANDOM
briefly during playback to go to
return to the beginning of the
By pressing
>
during
another track and
random
resumes
playback, the
random playback.
unit selects
current track.
2.
Press . twice
briefly
to go back to the
Repeat
previous
track.
3.
In
case
of audio
CD,
Repeat
You
1.
can
2.
(0-9).
play
a
track/all
on a
?
?
disc.
playing
2.
Press A-B
again at your chosen end point.
The Repeat icon and "A-B" appear on the menu
screen, and the sequence begins to play
repeatedly.
3.
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
a
disc.
repeat icon appears.
Press REPEAT to select
?
To
Track/All/Off
Press REPEAT when
The
1.
to go
enter the track number
buttons
directly to any track,
using the numbered
desired
To
repeat playback
once
during Repeat
Track
menu screen.
playback,
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
speakers (instead
of the five+ speakers normally required for
multi-channel audio from a home theater system).
play repeatedly.
Note:
If you press >
a
3D Surround
repeats the current track
All: repeats all the tracks on a disc.
does not
repeat
repeat mode.
Track:
Off(No display):
sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
the
a
A-B
the
cancels.
1.
Press AUDIO
during playback.
"3D SUR." appears
2.
Search
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
speed: X2, X4,
3.
X8
To exit SEARCH
to select the
backward
or
the
menu screen.
To return to normal
repeatedly
1.
on
until
playback, press AUDIO
"3D SUR." disappears from
the
menu screen.
required
forward.
mode, press N.
31
Repeat Programmed
Programmed Playback
1.
A program
1.
Insert
2.
memory.
contain 30 tracks.
can
a
player
Press REPEAT when
Press REPEAT to select
?
disc.
?
?
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
2.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
Note:
disappear
to exit
the
0:52:07
1.
mark will
MUSIC
List
E
Program
Track1
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
2-Music2
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Track8
E
Program
Track5
Clear All
7-Music7
DISPLAY
Audio CD Menu
PROGRAM
Info
the
setup
to
menu
"PBC"
on
the
use
must set PBC to Off
on
E
Program
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
5.
Press N
or
playing
list have
To
normal
resume
playback,
select
a
played
on
the
once.
playback
from
track of CD
and then press N.
32
the
Playback begins in
programmed the tracks.
the order in which you
Playback stops after all of the tracks
6.
on
ENTER to start.
"Program"
Program
stop mode
to
Edit mode.
move
to the
"Program"
list.
Repeat
to
erase
erase
additional tracks
the list.
the
Follow
Complete Program
as
steps
programmed
(or MP3/WMA) list
1-2 of
"Erasing
a
List
Track from
Program
above.
Use 3/4 to select "Clear
complete Program
All", then press ENTER.
for the disc will be erased.
Note:
The programs
removed.
VIDEO CD
Track1
Press PROGRAM in the
Press CLEAR.
2.
menu.
programmed playback
List
:
4.
List"
21).
page
the
List
Program
Use v/V to select the track that you wish to
from the "Program" list.
Erasing
Note:
PBC, you
during Repeat Track playback,
3.
The
Video CD with
once
Press B to
Video CD: Press PROGRAM while playback is
stopped. The program menu appears.
a
play repeatedly.
2.
1.
On
repeat mode.
Edit
MP3/WMA Menu
Press PROGRAM to exit the
does not
Track from
a
Video CD
on
PROGRAM Edit
desired
1/12
0:00:00
1/12
List
(See
Off(No display):
enter
Edit mode.
AUDIO CD
a
repeats the current track
All: repeats all the tracks on programmed list.
Erasing
again, then
the Program
repeat
repeat playback cancels.
E
Press PROGRAM
disc. The
Track:
If you press >
E
a
Note:
Press PROGRAM.
The
playing
icon appears.
The program function enables you to store your
favorite tracks from any disc in the
Tracks
are
also cleared when the disc is
Viewing
this DVD
Using
JPEG Disc
a
Player
you
can
Moving
view discs with JPEG
files.
1.
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
menu
screen.
Press .
Use
(see
Preview
List
JPEG Folder 1
>
or
b
or cursor
B
or
to advance to the next
ing a picture
previous file.
while view-
once
or
JPEG
Zoom
PHOTO
JPEG
to another File
the
to
enlarge
page)
zoom
29
photo image.
JPEG Folder 2
>>>
JPEG Folder 3
To rotate
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
Press v / V
JPEG Folder 7
during showing
JPEG Folder 8
picture
clockwise
or
a
counter clockwise.
To listen to MP3/WMA music
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
and press ENTER.
highlight
3.
on
You
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
can
to
N.
display
Insert the disc
highlight
the
(Slide Show)
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
are
(Normal)
?
On
three Slide
and
then
(Fast),
: >>>
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
Press
on
top of the
menu
is
Operation
types of file in
display
a
PHOTO
photo
menu.
file.
>>
pressed.
Tip:
To listen to
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
JPEG disc
limited
a
PHOTO word
?
>
Speed options
(Slow).
the two
icon then press ENTER.
starts. The playback will continue until
Playback
Tip:
There
disc.
same
containing
to MP3/WMA
move
press ENTER.
?
the
2.
JPEG
Use vVbBto
on
listening
player.
STOP is
Slide Show
files while
music files recorded
the
or
watching picture
JPEG
1.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
to rotate the
picture
?
highlighted.
compatibility
is
player
follows:
as
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an
Depending
on-screen
RETURN, information of file is hidden.
with this
display
after several
minutes,
some
of
the files may be too large
reduce the resolution
of the JPEG files to less than 2M pixels as 2760 x
---
Still Picture
1.
2048
Press PAUSE/STEP
The
2.
JPEG
player
will
now
again.
and burn another disc.
slide show.
go into PAUSE mode.
To return to the slide
PAUSE/STEP
during
pixels
show, press N
or
?
The total number of files and folders
the disc
on
should be less than 650.
press
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
Ensure that all the selected files have the
extensions when
?
into the CD
If the files have
rename
?
copying
".jpg"
layout.
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
by
shown
".jpg"
extension will not be
this DVD+VCR. Even
as
JPEG
image
though
files in
Explorer.
33
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
the DVD-Video format that have been
a
?
Refer to the information in this
contacting
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
Insert
a
disc and close the
menu
appears
on
the TV
tray. The DVD-VR
screen.
DVD-VR
When
Please
shipping
save
Do not
Pressv/VtoselectatrackthenpressNor
ENTER and playback starts.
move
to the list
menu.
use
near
volatile
liquids
such
as
insecticide
the unit.
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
the
Do not leave rubber
?
Press TITLE to
the unit
the exterior surfaces clean
spray
?
service technician.
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
?
3.
before
the Unit
Handling
Keeping
2.
a
chapter
DVD-recorder.
the Video
1.
using
finalized using
Maintenance and Service
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of
discs.
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
only
scramble
copy protection system (with
system)
allowing the recording of 'copy once' broadcast
a
programs. CPRM stands for Content Protection for
Recordable Media.
This
player
is CPRM
compatible,
which
means
that you
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
can
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only
specifically compatible
can
be
played
on
with CPRM.
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
34
If the
use.
contact your nearest authorized
Playing
a
DivX Movie Disc
DivX disc
as
this DVD
Using
Insert
1.
a
appears
Player
you
can
disc and close the
on
the TV
play
compatibility
with this
player
is limited
follows:
DivX disc.
?
tray. The MOVIE
menu
Available resolution size of the DivX file is under
720x576
(W
x
H) pixel.
screen.
?
The file
name
of the DivX subtitle is available
by
56 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible code to
file, it may be displayed as
display.
"
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
express in the DivX
mark on the
"
_
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the screen frame is
over
30
per 1 second, this unit may not operate
normally.
Press v / V to select
2.
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
If the file is recorded with
*
or
N.
move
On
is
CD with
highlighted.
Operation
are
called
1-point, 2-point,
or
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
a
encoders, like DivX
There
Playable
?
GMC, the unit
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4
Press STOP to exit.
Press DISC MENU to
audio is
GMC?
Tip:
?
or
supports only 1-point of the record level.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
4.
interleaved, either video
outputted.
?
press ENTER.
3.
file is not
and
highlight
If the video and audio structure of recorded
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 8 48 kHz (MP3),
-
within 32
?
Bit
32
48kHz
(WMA)
rate: within 8
320kbps (MP3),
192kbps (WMA)
-
-
-
35
Additional Features-VCR
On Screen
You may
part
Video Doctor
Display
the current time
easily display
tape
or
counter, amount of tape left, day, month, year, day of
programme channel, tape speed and operational mode of your VCR will appear on the TV
screen. If a recording is taking place these On Screen
week,
Displays
will not be recorded onto the
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1.
Press i.
Press1or2toselect
.
Press OK.
tape.
Press CLK/CNT to
1.
display.
repeatedly
Press CLK/CNT
display options.
The
tape
to
cycle through
a
counter and the amount of
Press CLK/CNT
the TV
to
again
PSET
R
tape loaded.
majority of the
leaving only the
will clear
12
Pr-12
After 3 seconds the
Displays
the
counter and amount of
tape left will appear if there is
2.
(Self-Diagnosis)
SET
SYS
fOSD
ON
OFF
On Screen
clock
tape left
remove
ACMS
the
on
all
or
tape
screen.
displays
ANTENNA CONNECT
from
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
screen.
NEXT TIMER PROGRAMME
PLEASE CHECK
Tape Counter Memory Stop
The
i
displayed on the
the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
Digital Tape Counter
display window instead of
on
1.
the
can
be
2.
Press CLEAR to set the counter to 0:00:00.
start
The
recording.
will display
Press STOP when
problem.
playback
or
recording
is
NEXT TIMER PROGRAMME
O PR-01 26 10:00~11:00SP
Shows the current status of timer
Press BACKWARD.
tape will rewind and automatically stop when
the counter returns to 0:00:00.
3.
Lock
(Child Lock)
The control buttons
switched off
using
1.
on
the front of the unit
that your unit
the remote control.
so
can
only
be
can
be
operated
Press LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons
on
the front of your unit
SAFE will flicker in the
display
are
window for
pressed
a
few
seconds.
2.
36
jack securely.
Press LOCK
to switch off the child lock.
OFF will
in the
again
disappear
display
window.
place
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
complete.
The
a
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in
the actual play time
tape counter
in hours, minutes and seconds.
2.
to check
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
Press CLK/CNT.
or
3 or 4
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the
tape.
Press N
Press
Press i to
remove
the
menus
recording.
from the TV
screen.
Hi-Fi Stereo Sound
System
Your VCR will record and
playback
sound. In addition it has
stereo NICAM
a
Hi-Fi stereo
digital stereo
and playback
12
PSET
R
sound decoder. This allows you to record
the sound in several different ways. Video cassettes
recorded
12
Pr-12
Pr-12
SET
ACMS
SYS
PSET
R
fOSD
fOSD
ON
OFF
ON
OFF
AUTO S
A
4:3
16:9
i
your VCR will have a normal mono audio
track and two VHS Hi-Fi stereo audio tracks. These
on
stereo tracks allow you to make audio recordings in
Hi-Fi stereo or bilingual mode from a TV broadcast,
AUTO:
stereo audio
programmes
as
Wide-Screen and Normal
programmes
4:3
as
normal.
1.
system, video disc
Your VCR's NICAM
you to
well
enjoy
or
Automatically plays
another Hi-Fi VCR.
sound decoder allows
digital
broadcasts with NICAM
sound,
Only for playing back
recordings (4:3).
as
standard stereo, bilingual and mono sound.
The particular type of sound received or that
as
recorded will be
for
and
recording
Normal format
16:9:
Only
screen
for
format
of seconds:
couple
a
briefly displayed
the TV
on
back Wide-Screen
playing back and recording
recordings (16:9).
Wide-Screen
STEREO NICAM
Sound is
recorded
automatically
stereo and
mono
on
Operation
the Hi-Fi
tracks of the video
tape.
BIL NICAM
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
mono
on
12
the Hi-Fi
channel
Pr-12
PSET
R
(left)
AUTO S
4:3
16:9
fOSD
ON
OFF
i
track of the video
tape.
MONO
The sound is recorded
mono
2.
track of the video
Press AUDIO
the Hi-Fi tracks and the
on
3.
To
tape without any separation.
repeatedly
Press i to
enjoy
the
remove
from the TV
screen.
Wide-Screen
connect your VCR to
until the desired audio
menus
playback you must
the TV using a SCART
cable.
mode appears.
3.
The choice is
MONO.
STEREO, LEFT, RIGHT and
In BIL NICAM
playback
the
primary
lan-
guage is output on the left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
The
primary language
willbe
output from both
channels when the audio
Please note that when
To set the decoder
We have already described, how to connect a
decoder for pay-TV station as CANAL+ or PREMIERE
on page 10. For the recording of an encoded station
you do not have to control anything. You just select
the station and wait shortly until the decoding will
start.
is MONO.
setting
adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
1.
Press i.
The main
Press F
Wide Screen
Your DVD+VCR
aspect
screen
of wide
can
Compatibility
record and
play
2.
screen
signal
must be broadcast
by
1.
on
E to select.
When the decoder is connected to the AV2
OFF: When another VCR is connected to the AV2
type
socket.
3.
Switch
or
socket.
the TV
station.
Press D
ON:
screen
ratio programmes (16:9). To record a wide
format programme successfully the correct
or
Press OK.
16:9
back wide
will appear on the TV screen.
G to select the DECODER.
menu
Press i to return to
a
TV
picture.
your DVD+VCR.
Press i.
PressForGtoselect
.
Press OK.
2.
Press v/V
repeatedly
to select:
AUTO, 4:3
or
16:9.
37
Controlling
Additional Features
Last Scene
This
source, and
power switch of your LG TV with the supplied remote
control.
Memory
memorizes last
player
that is viewed. The last
scene
from the last disc
remains in memory
the disc from the player or switch
scene
if you remove
off the player. If you load
even
memorized, the
scene
is
a
disc that has the
can
control the sound
level, input
You
can
control the sound
level, input
power switch of non-LG TVs as
is listed in the table below, set the
player
manufacturer code.
1.
does not memorize the
player
before
disc if you
to play the disc.
scene
commencing
of
in
appears when you leave the DVD
mode for about five minutes.
Stop
Video Mode
Setting
down TV POWER
2.
(see
the table
Release TV POWER button.
If
more
them
than
one
one
at
a
code number is
1
Zenith
1,3,4
Samsung
6,7
not
Sony
8,9
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
Hitachi
4
video mode.
Note:
flickering
That
Dot Crawl is shown
or
means
To
Vertical
straight
on
interpolation
or
lines.
De-interlace is
the video
mode, press and hold
change
DISPLAY about 3 seconds during disc playback.
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
:
The
video
MODE2
:
Description
source
material)
:
(film
materi-
is determined from disc information.
Suitable for
based material
MODE3
of each Video Mode
material of the DVD video
playing film based content or video
recorded by the progressive scan method.
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
menu.
setting only
works when the
Scan mode is set to "On"
on
the
Depending
function
setup
that works
on
(Default),
2
your TV, some or all buttons may not
the TV, even after entering the correct
on
manufacturer code.
?
If you enter a new code number, the code number
previously entered will be erased.
?
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the
MODE1
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
?
video mode number selected is
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
new
one
with your TV.
LG / GoldStar
discs, the playback picture may be
listed, try entering
time until you find the
Code Number
or
button, press the
below).
Manufacturer
With certain
38
holding
Code numbers of controllable TVs
screen saver
player
al
While
for your TV
a
Screen Saver
The
appropriate
number buttons to select the manufacturer code
switch off the
The
source, and
well. If your TV
scene
recalled.
automatically
You
Note:
This
other TVs with the remote control
appropriate
code number
again.
from DVD To VCR
Copying
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC/ITR button.
Notes:
Be
sure
setup
to set
Scan" to "Off"
on
the
recorder
With this video recorder you can make recordings
from an external source, such as copying from
another video recorder
protected,
attempting to copy is copy
you may not be able to copy the disc.
are
3.
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS Tape
Insert a blank VHS
In the
following description, this video recorder will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
will be referred to
videotape
into the VCR deck.
the DVD to VHS Tape
Pres the REC/ITR button.
Copy
If the DVD disc
to press the
appears, you may need
button manually to begin
menu
Play
the
panel
panel of
rear
the front
2.
as
VCR A.
VCR A should be connected to the SCART socket
on
The DVD will go into Play mode and the VCR
will go into Record mode.
of your unit
your unit.
Insert the recorded
or
the AV sockets
tape into VCR A and
a
on
blank
tape into VCR B.
3.
copying.
Press AV until the socket you wish to record from
is displayed. (VCR B)
AV 1 for
recording
Note:
If you press the REC/ITR
DVD mode.
button, be
sure
this unit in
the
rear
the
rear
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
on
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
on
(Left
4.
camcorder.
Note:
1.
2.
or a
menu.
If the DVD you
1.
"Progressive
from another video
Recording
the Copy Process
When the DVD is finished
end the copy.
Stop
playing,
press STOP to
You must
stop the Copy process manually
when the DVD movie ends, or the unit may
replay
and record
over
and
over
4.
&
To start
Right)
on
the front of your unit.
press the REC/ITR
VCR A.
recording,
and PLAY
5.
sockets
on
When you want to finish
on both video recorders.
copying,
on
VCR B
press the STOP
again.
39
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Republic
AF
Area
Ethiopia
Fiji
Afghanistan
Argentina
Czech
40
code from this list.
SG
SK
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Troubleshooting
Check the
following guide
for the
possible
cause
or
VCR do not
problem
a
before
contacting
service.
Cause
Symptom
DVD
work
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
properly.
No power.
The power cord is disconnected.
the power cord into the wall
outlet securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the TV
picture.
signal output.
Plug
screen.
No sound.
The video cable is not connected
Connect the video cable into the
securely.
securely.
The Progressive Scan is set to "On"
on the setup menu but is connected
to a standard (analog) television.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
signal output.
The audio cables
are
not connected
picture
is
poor.
The DVD
not start
does
player
playback.
Turn on the equipment connected
with the audio cable.
The
Set the
is set to the
The disc is dirty.
The TV channels are not tuned in
An
unplayable
properly.
disc is inserted.
placed upside
down.
within the
placed
guide.
Video
tape
properly.
cannot be
jacks
The power of the equipment connected with the audio cable is turned off.
The disc is not
does not work
Connect the audio cable into the
securely.
The disc is
The remote control
Scan to "Off"
securely.
Digital Audio Output
wrong position.
The
Progressive
(see page 19).
jacks
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
Clean the disc.
Check tuning, carry out
tuning again.
Insert a playable disc. (Check the disc
type and Regional code.)
Place the disc with the
down.
playback
Place the disc on the disc
rectly inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace
Is the cassette
Eject
compartment empty?
the
the batteries with
tray
or
side
cor-
change
new ones.
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
No NICAM sound
NICAM mode is not set
recording
properly.
properly.
Select "STEREO" by repeatedly pressing "AUDIO" on the remote control.
Make
sure
NICAM in the
menu
is set
to AUTO for the station to be recorded.
41
Specification
General
Power
requirements
AC
Power
consumption
17W
Dimensions
Mass
200-240V,
50 Hz
430 X 78.5 X 265
(approx.)
4.2
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
RF Modulator
UHF 22
(41˚F
to
95˚F)
display tape
-
68
(Adjustable)
System
Laser
Semiconductor
Video Head
laser, wavelength
Double azimuth 6
system
650
heads, helical scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75
Vp-p,
(SCART)
(RCA)
ohms, unbalanced (SCART/RCA)
Outputs (DVD)
VIDEO OUT
1
Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
sync., Mini Din
(Progressive Scan)
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
RGB
0.7
output
Vp-p,
4-pin
x
x
1
1
75 ohms
Audio
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (analog audio)
2.0 Vrms
(1 KHz,
0
dB),
600 Ω, RCA
jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than
Video
1.0Vp-p,
RGB
0.7
output
Design
and
specifications
are
Manufactured under license from
"DTS" and "DTS
42
Digital
Out"
are
subject
Dolby
to
Vp-p,
change
Laboratories.
trademarks of
Digital
75
1 kohms
(SCART)
ohms, unbalanced (SCART)
75 ohms
without notice.
"Dolby"
Theater
and the double-D
Systems,
Inc.
symbol
are
trademarks of
Dolby
Laboratories.
P/NO
:
3834RV0036P
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement